3 minute read
ONE-OF-A-KIND REELS FOR ANGLERS OF EVERY KIND.
from 2024 SEVIIN Reels
PRECISION-MACHINED
GF reels are built for harsh conditions with CNC-machined, hard-brass gearing supported by precision stainless steel ball bearings. A stainless steel spool shaft supports the forged aluminum spool, enabling the use of braided line in the heaviest cover.
CARBON-FIBER DRAG
The friction washers in the GF drag are made from woven carbon fiber, which is virtually impervious to wear. The carbon washers are mated to stainless steel washers providing drag lockdown up to 19 lbs while remaining silky-smooth.
CARBON-FIBER
The ultra-light, one-piece, carbon-fiber handle provides extreme strength under even the heaviest cranking conditions. Its sleek, swept design puts the handle knobs closer to the reel’s center line, resulting in less side torque under load.
Line Memo
With the unique line memo dial you’ll never have to guess what size line to run. Just pick your line, set the dial, and always keep tabs on line sizes as you rig your rod/reel setups for different techniques.
No matter the fishing situation and technique, there’s a GF Series reel that gives you the perfect balance of castability, smoothness, and comfort. Each model is packed with features engineered to optimize performance without sacrificing durability.
• One-piece graphite frame and side covers
• 4 + 1 stainless steel bearing system
• 32MM forged aluminum spool holds 110 yards of 12 lb mono
• Custom designed carbon fiber handle with EVA grips
• Multi-stack carbon fiber / stainless steel drag system
• Micro-adjustable magnetic cast control
• Precision hobbed hard brass pinion and drive gear
• Line memo indicator dial
Spinning Reels
ENGINEERED ON LAND. BATTLE -TESTED ON WATER.
The GS Series is designed from the ground up with high-performance features that serious spinning anglers demand. Every model is meticulously engineered to balance smoothness with long-lasting durability.
• Lightweight carbon fiber / polymer body, side cover, and rotor
• 6 + 1 stainless steel bearing system
• Forged and anodized aluminum spool with braid band
• Custom designed aluminum handle with soft-touch knob
• Multi-stack carbon fiber drag / stainless steel drag system
• Precision hobbed hard brass pinion and die-cast helical drive gear
• S-Curve Slow oscillation system
CARBON-FIBER
/ POLYMER CONSTRUCTION
A molded polymer body infused with carbon fiber greatly increases strength and stiffness. This provides an extremely lightweight body, side cover, and rotor system that’s super rigid and won’t flex under heavy loads. The entire drive train is perfectly aligned to maintain smoothness and sensitivity over time.
Slow Oscillation System
The S-Curve design features a super-slow oscillation that insures line is stacked evenly on the spool resulting in longer casts and fewer line management issues even when using lighter finesse size lines. An internal support guide insures spool oscillation remains consistent even under heavier drag loads.
BRAID-READY FORGED SPOOL
One-piece forged aluminum spool is machined and hard anodized. The forged design minimizes weight while maintaining strength. A braid band allows the use of braid tied directly to the spool without the need for backing. A unique spool lip design maximizes casting distance by minimizing line contact during the cast.
Carbon Fiber Drag
The friction washers are made from woven carbon fiber, which is virtually impervious to wear. The carbon washers are mated to stainless steel washers providing a wide drag range with minimal variation to protect against break-offs with lighter lines.
CARBON-FIBER / POLYMER CONSTRUCTION
A molded polymer body infused with carbon fiber greatly increases strength and stiffness. This provides an extremely lightweight body, side cover, and rotor system that’s super rigid and won’t flex under heavy loads. The entire drive train is perfectly aligned to maintain smoothness and sensitivity over time.
Slow Oscillation System
The S-Curve design features a super-slow oscillation that insures line is stacked evenly on the spool resulting in longer casts and fewer line management issues even when using lighter finesse size lines. An internal support guide insures spool oscillation remains consistent even under heavier drag loads.
BRAID-READY FORGED SPOOL
One-piece forged aluminum spool is machined and hard anodized. The forged design minimizes weight while maintaining strength. A braid band allows the use of braid tied directly to the spool without the need for backing. A unique spool lip design maximizes casting distance by minimizing line contact during the cast.
The GX Series is more than just a pretty face. Sure, its sleek style is going to stand out on your boat deck, but SEVIIN’S built-from-scratch, angler-centric design gives you a reel built to go toe-to-toe with whatever species you target.
• Lightweight carbon fiber / polymer body, side cover, and rotor
• 10 + 1 stainless steel bearing system
• Forged and anodized aluminum spool with braid band
• Custom designed aluminum handle with soft-touch knob
• Multi-stack carbon fiber drag / stainless steel drag system
• Precision hobbed hard brass pinion and die-cast helical drive gear
• S-Curve Slow oscillation system
• High-strength 1-piece titanium bail wire resists bending
Carbon Fiber Drag
The friction washers are made from woven carbon fiber, which is virtually impervious to wear. The carbon washers are mated to stainless steel washers providing a wide drag range with minimal variation to protect against break-offs with lighter lines.
Saltwater Spinning Reels
