easy
Level of difficulty
medium
hard
You can find more creative tips at www.staedtler.com
World Cup jewellery for true football fans
Off you go – perfectly styled for the World Cup! At long last, the moment has once again arrived for the round thing to be booted into the square thing – the football World Cup is upon us and about to kick off. High time to get some matching accessories sorted out! If you‘d like to show support for your favourite World Cup team and are still searching for the right look for you and your fellow fans then you need look no further: the FIMO World Cup jewellery in the colours of Germany‘s national flag are the perfect solution! The bracelet, necklace and earrings are quick to make and are sure to be a real eye-catcher at any public viewing event. World Cup here we come!
Shopping / material list
WM jewellery in german colours You will need these STAEDTLER articles:
You can find our products in well-stocked sales outlets. Should you have any queries, please call our hotline: +49 (0)911 9365-888. Have fun crafting!
Product
Colour
Art.-no.
FIMO soft
Indian red
8020-24
1
FIMO soft
Black
8020-9
1
FIMO effect
Glitter gold
8020-112
1
FIMO accessoires, Silver Jewellery frame, square, 25 x 25 mm
8625 22
2
FIMO accessoires, Silver Jewellery frame, square, 10 x 10 mm
8625 23
2
FIMO accessoires Ring, square-shaped
Silver
8625 03
1
Acrylic roller
--
8700 05
1
Modelling Tools
--
8711
1
Blade
--
8700 04
1
Bead-piercing needles
Quantity
8712 20
1
Oven thermometer
--
8700 02
1
Gloss varnish
--
8703 01 BK
1
You will also require: Smooth work surface, flat nose pliers, jewellery wire, 2 earring hooks, crimp beads, metal beads, elastic band FIMO is a craft material NOT a toy.
3
easy
Level of difficulty
medium
hard
You can find more creative tips at www.staedtler.com
Instructions 2
1
Earrings: For the earrings, roll 2 small balls out of half a strip of indian red FIMO soft. Do the same with FIMO soft in black and FIMO effect in glitter gold. Press into the small, square-shaped jewellery frames. Use your fingers to press in firmly so that the FIMO is well joined with the edge of the frame. Then roll over the frame with the acrylic roller to make sure the FIMO fits snugly and to give the clay a smooth surface. Use the blade to cut off any excess FIMO from around the outside of the frame.
Push two bead-piercing needles horizontally through two holes in opposite sides of the frame. Thread all three of the smaller square-shaped earring frames onto the bead-piercing needles and place on a sheet of baking paper. Repeat with the larger bracelet frames. Then harden everything in the oven for 30 minutes at 110째C. Take them out, leave to cool and then carefully pull the bead-piercing needles out. Add a coat of gloss varnish if required.
Bracelet: To make the bracelet, use the acrylic roller to roll 4 strips of indian red FIMO soft out to a thin sheet. Repeat with black-coloured FIMO soft and FIMO effect in glitter gold. Place 2 large square-shaped jewellery frames on each of the coloured sheets of clay and press down as far as they will go. Roll over the frame with the acrylic roller again to obtain a smooth surface. Use the blade to cut off any excess FIMO from around the outside of the frame.
Tip: In order to ensure that the holes do not shrink, the bead-piercing needles must be left in during the baking process.
3
Thread the small squares for the earrings onto a length of jewellery wire in the order of the colours of the German flag. Small metal beads can be added as spacers between the individual colours.
cm
The portioning aid helps you cut your block of FIMO into the right portions.
easy
Level of difficulty
medium
hard
You can find more creative tips at www.staedtler.com
Instructions 4
Finish off by joining both ends of the wire together with a crimp bead and then attach to the earring hook.
5
6
String the 6 large squares for the bracelet onto a length of elastic. Again, you should keep the colours black, red and gold in the right order. Tie the ends of the elastic together.
Press a ball of left-over FIMO into the square-shaped ring bezel leaving approx. 3 mm free. Place strips of the three colours of the flag on top and smooth over with the acrylic roller.
Tipp: The size of the bracelet can be adjusted by adding crimp beads between the individual squares.
Level of difficulty
easy
medium
hard
You can find more creative tips at www.staedtler.com
Flags for true fans – guaranteed to add colour to any party!
Ring, necklace, bracelet or earrings – there are no limits to what you can make. Whether black/red/gold, blue/ white/red or even green/white/red ... you can create your very own fan look to match the colours of your national flag.