INTRODUCING: The Revolutionary Stallion Stainless DIY Range Of Staircases & Balustrades
April 2011
DIY Horizontal Bar Balustrade System DIY Vertical Bar Balustrade System DIY 10mm Glass Balustrade System DIY Prefabricated Staircase System www.stallionstainless.com.au
DIY Horizontal Bar Balustrade System What is the Stallion Stainless Steel DIY Balustrade System? It is our new range of ready-to-go posts and accessories for balustrades in a 316 Stainless Steel Satin Finish.
Where can it be used?
FREENG I
SHIPP
RALIA AUST E WID
Both inside and outside of your home. 316 Stainless Steel is the best corrosion resistant steel available, particularly when used outside or in coastal locations. Like all products that are subject to the outside elements, if they are not regularly maintained they will deteriorate in appearance. Products can be applied to prevent deterioration can be found at most good hardware stores.
BHS - Bar Holder (Square Post)
RPD-980 - Round Post RPD-900 - Round Post SPD-980 - Square Post SPD-900 - Square Post
CS1 - Curved Saddle
BE 12.7mm - Bullet End
BHR - Bar Holder (Round Post)
FS1 - Flat Saddle
HT 12.7mm - Hollow Tube available in 304 and 316 grade
BHCE - Closed End Bar Holder No bullet end needed
Installation Guide at www.stallionstainless.com.au
What are the key features and benefits of the Stallion range? • 2 styles of posts available • 40mm Square Post for top mounting • 50mm Round Post for top mounting (cover plate supplied) • No welding or gluing required for the posts; they are ready straight out of the box to fix to the stair • Posts are available in 2 set lengths; 1 for the rake and 1 for the level. Length is measured from the bottom of the post to the top of the saddle (when fitted) • The saddle (the part the handrail fits to) can be adjusted to suit any angle and even more
importantly can be removed to make the fixing of the handrail easier • 2 different balustrade options are available that can be fitted to the posts • Glass Clamps for both the square and round posts to suit 8mm and 10mm glass • Horizontal Bars, the holders (for both square and round posts) and bullet ends • All parts are kept in stock for immediate delivery • Recently upgraded design • Heavy duty cast saddles • 4 fixings to base plate
DIY Vertical Bar Balustrade System DIY VERTICAL BAR BALUSTRADE SYSTEM
NEW!
N
ESIG D D E NT PATE
This is the latest vertical DIY balustrade system. It has been developed to accommodate the issue associated when you have a balcony or void area higher than 4 metres. This DIY system is currently only available with square posts and is only available in 316 certified satin finish.
FREENG I
SHIPP
RALIA AUST E WID
Adjustable pivots are flexible up to 38 degrees
P1 - Patented Adjustable Pivot Arm To Suit 12.7mm Square Tube
Installation Guide provided upon request
CS1 - Curved Saddle
FS1 - Flat Saddle
SPD-980 - Square Post SPD-900 - Square Post
P2 - Patented Adjustable Pivot Arm To Suit 38.1mm Square Tube
ST 12.7mm - Square Tube (1.2mm wall)
ST 38.1mm - Square Tube (1.2mm wall)
DIY 10mm Glass Balustrade System
GC1 - 8-10mm Rubber Glass Clamp (Round Post)
CS1 - Curved Saddle
FS1 - Flat Saddle
RPD-980 - Round Post RPD-900 - Round Post SPD-980 - Square Post SPD-900 - Square Post
GC2 - 8-10mm Rubber Glass Clamp (Square Post)
Double wrapped, Waterproof packaging used to avoid scratching.
Toughened Glass Sizes In Stock
This system is also available in a Stainless Steel mirror finish. Just Released! Please Note: Raking custom angle panels require MDF templates usually made by local glass suppliers. ie - Viridian.
10mm 850×1500 10mm 850×1450 10mm 850×1400 10mm 850×1350 10mm 850×1300 10mm 850×1250 10mm 850×1200 10mm 850×1150 10mm 850×1100 10mm 850×1050 10mm 850×1000 10mm 850×950 10mm 850×900
FREENG I
SHIPP
RALIA AUST E WID
10mm 850×850 10mm 850×800 10mm 850×750 10mm 850×700 10mm 850×650 10mm 850×600 10mm 850×550 10mm 850×500 10mm 850×450 10mm 850×400 10mm 850×350 10mm 850×300 10mm 850×250
Installation Guide provided upon request
DIY Prefabricated Staircase System These staircases are usually packaged pre-fitted ready for delivery inter-state or regional WA. To pre-make these staircases, it is very simple and all that is needed is a basic sketch and the dimensions. In some instances, we can arrange for the dimensions to be measured by our skilled tradespeople to ensure a high quality and accurate product is manufactured. The Process Of Manufacturing Our Prefabricated Stairs
Beams come in options:
Plates cut to size & drilled
Stumps cut to angle & length
Setting out stairs ready for welding
Products are re-checked prior to shipping
Heavy duty mig welding.
Stairs being positioned and lifted with block & table
A fully welded system ready to be disassembled
Stairs all etch primed and packaged ready to ship locally or interstate.
RHS 200mm x 100mmx 6m or 200mm x150mm x 6m
We Manufacture To Suit Requests And Drawings Sent From All Over Australia. Free Shipping!
Stairs awaiting packaging and delivery to Sydney
Stairs awaiting packaging and delivery to Melbourne
Stairs awaiting packaging and delivery to Tasmania
Custom-Made For Easy Installation Some recently completed DIY assemblies that are being further developed by our team...
Fully adjustable to suit any angle or height.
Some recently completed jobs done with steel stringers and glass treads... These modern steel and glass staircases can add that extra touch of elegance to any entrance, home or workplace. The specially made glass treads allow the transfer of light through the stairs and can provide an atmospheric and open design.
We custom make all timber treads in our own factory, using 3 different timbers to match existing timber floors or other timberwork
Treads getting glued up on a press machine
Treads getting cut to size
Treads getting sanded
Malaysian Cherry Treads
Victorian Ash Treads
Jarrah Treads
Stainless Steel & Timber Handrails Timber Handrails: Suitable For Internal Use. Our timber handrails can be made from a variety of different timbers. These range from standard timbers such as Jarrah, Victorian Ash or Malaysian Cherry up to exotic species such as American Oak or Marri. Each timber handrail is unique and built to fit your taste and budget.
49mm Round Handrail and 49mm Round with Flat Base
Elliptical Handrail 70mm x 43mm
Handrails can be supplied in a sand finish, however we also offer high quality single packed spray finish lacquer.
Stainless Steel Handrails Stainless Steel handrails can be used in both mirror or satin finish. The most common size is 50mm round railing.
Parts & Service Bolts and screws must be supplied by Stallion Stainless to ensure high quality products are used. We have a huge range of screws and bolts available in stock. All products include an Installation Guide and we can also offer product and technical support if needed. From nuts and bolts, to screws and washers, Stallion Stainless provides an extensive range in both 304 and 316 grades of stainless steel straight off the shelf. Most fasteners can be manufactured in different types of stainless steel or other non-corrosive alloys. Non-standard shaped fasteners can be fabricated to your individual specifications in any material. visit our website for more details: www.stallionstainless.com.au
Other Products... Custom Balustrade & Staircases
DIY Stainless Steel Fittings
DIY Stainless Steel Pool Fittings
Coming Soon... DIY Staircases In Many Styles Stallion Stainless is the first Australian staircase company which specialises in both stainless steel and timber all combined in one factory. When you contact our Stallion Stainless head office you won’t be passed onto a sales person. You will be dealing directly with the owner of the company.
Paul Taddei
Phone: +61 8 9458 2646 Mobile: +61 0417 966 807
Head Office (Perth)
OPENING HOURS
www.stallionstainless.com.au
Mon-Thur Friday Saturday
7.30am - 4.00pm 7.30am - 2.00pm By Appointment
Ph: 08 9458 2646 Fax: 08 9356 2082 Mob: 0417 966 807 stallionstainless@westnet.com.au 23 Morgan Street, Cannington WA 6107
Melbourne Office Mob: 0431 487 757 stallionstainlessmelbourne@westnet.com.au