TECLINE SET CREATOR: A GUIDE TO THE PERFECT CONFIGURATION

SET CREATOR

A GUIDE TO THE PERFECT CONFIGURATION

Photo: MICHAL SEVECEK

Š 2017 Upstream UG. All rights reserved.

This publication is protected by international copyright laws.

Without written approval by the copyright holder, no part of this publication may be altered.

Duplication, translation and dissemination in unaltered form are explicitly allowed and desired.

Design & Layout: Upstream UG | upstream-tec.de Tecline is a brand of Scubatech SP. z o.o., Mierzyn, Poland.

Photo: MICHAL SEVECEK

CONTENTS INTRODUCTION - 2 MINI BACKPLATES - 6 STANDARD BACKPLATES - 8 HARNESS COMPONENTS - 14 DONUTS FOR SINGLE TANKS - 18 ASYMMETRIC DONUTS - 22 DONUTS FOR DOUBLE TANKS - 26 WEIGHT POCKETS, BELTS, ADAPTERS - 32 OTHER ACCESSORIES - 36 SIDEMOUNT SYSTEMS - 40 SIDEMOUNT ACCESSORIES - 42 SET CREATOR - 44

INTRODUCTION Purpose of this guide

PUTTING TOGETHER INDIVIDUAL, PERFECTLY CONFIGURED DIVING GEAR

means far more than simply choosing a set or combining single components.

It means determining the individual requirements of a diver, in order to select a matching and thus perfect configuration, which must then be validated/ optimized during several test dives.

WE WOULD LIKE TO SUPPORT DEALERS AND CUSTOMERS

on this way and provide an overview of all available TECLINE backplates, harnesses, donuts and accessories.

We deliberately do so without pre-configured sets, since - in our experience - every turnkey solution has to be adapted anyway. Instead, we would like to encourage dealers and customers do “dive right in” and evaluate the individual requirements, rather than to accept an off-the-shelf solution, which might prove insufficient later on.

THE HIGH-QUALITY COMPONENTS BY TECLINE

let you compose individual equipment for sports divers and exigent tec divers, that will satisfy all requirements of a “perfect configuration”.

WE HOPE, YOU WILL ENJOY USING THIS GUIDE.

Should you have any questions, please do not hesitate to contact us.

The TECLINE Team

2

INTRODUCTION Hints and Tips

ESPECIALLY FOR THOSE CHANGING FROM AN ADV, THE FIRST STEPS WITH HARNESS AND DONUT CAN BE CHALLENGING, IF THEY CANNOT RELY ON COMPETENT SUPPORT. This applies for equipment selection, as well as for adjustment and test dives.

But even experienced tec divers might get new insights, when they try out a „Special Edition“ or other innovative equipment.

FOR THIS REASON, PLEASE NOTE THE FOLLOWING: • Turn to your preferred vendor or to a friend, who can support you in selecting your configuration.

• Think carefully, where you want to use your new equipment (cold water, holiday, mono tank, double tank...). Your advantage: A combination of harness and donut is modular and can thus be “re-used” for several purposes.

• Do not rely solely on advertising or on the opinion of others, but try out your selected configuration in the water. Several times.

• It is all about you: You will only achieve a “perfect configuration”, if you feel well in it and if you can move effortlessly under water while keeping the optimum trim.

Photo: MICHAL SEVECEK

3

INTRODUCTION How to Proceed

PROCEED AS FOLLOWS, TO SELECT YOUR DESIRED CONFIGURATION: START WITH THE CHAPTER ABOUT BACKPLATES OR DONUTS.

Standard Backplates - 6

READ ABOUT THE MAIN CHARACTERISTICS OF THE RESPECTIVE ITEM.

SELECT THE DESIRED ITEM.

Stainless steel bp with DIR harness T15010

Matching donuts::

CONTINUE BY SELECTING A MATCHING ITEM AND COMPLETE IT WITH ACCESSORIES, IF NEEDED.

4

•

Donut 13 | Donut 15 | Donut 17 |

•

Donut 17 SE | Donut 22 | Donut 22 SE | Donut 30 SE

•

Peanut 16 | Peanut 21

Matching extensions: •

All harness versions

• •

Weight pockets and tank belts Other accessories

How to Proceed Use the check list at the end of this guide to note your perfect configuration. The more details you provide to your dealer, the easier the evaluation will be.

WE HOPE, THAT YOU WILL FIND THIS GUIDE USEFUL IN FINDING WHAT YOU ARE LOOKING FOR. Should you have any questions, please do not hesitate to ask.

We are also looking forward to your suggestions regarding this guide.

NOW, HAVE FUN USING IT. Remember:

THERE IS NO “ONE FITS ALL” SOLUTION, BUT ONLY THE CONFIGURATION, THAT IS JUST RIGHT FOR YOU - YOUR

Photo: MICHAL SEVECEK

5

MINI BACKPLATES Mini Backplate Aluminum Mini Backplate Aluminum, H-Shape About 40 % smaller than a standard backplate Black Thickness: 3mm Backplate weight: 310g Note: Due to the smaller bore distance NOT suitable for standard mono tank adapters!

Mini Backplate Aluminum T15086

Mini Backplate Aluminum with DIR Harness T15042-06

Mini Backplate Aluminum with Comfort Harness T15044-06

Matching Donuts: • Peanut 11 • Peanut 16 • Peanut 21 Matching Extensions: • All harness versions | Weight pockets and tank belts | Other accessories

6

MINI BACKPLATES Mini Backplate Stainless Steel Mini Backplate Stainless Steel, H-Shape About 40 % smaller than a standard Backplate Thickness: 3mm Backplate weight: 920g Note: Due to the smaller bore distance NOT suitable for standard mono tank adapters!

Mini Backplate Stainless Steel T15084

Mini Backplate Stainl. Steel DIR Harness T15042-01

Mini Backplate Stainl. Steel Comfort Harness T15044-01

Matching Donuts: • Peanut 11 • Peanut 16 • Peanut 21 Matching Extensions: • All harness versions | Weight pockets and tank belts | Other accessories

7

STANDARD BACKPLATES Carbon Backplate A High-Tech Backplate in Standard Format Very sturdy, suitable for up to D12 Thickness 3mm Black with cut-out Tecline logo Weight only 475g

Carbon backplate (3mm) T15072

Matching Donuts: • Donut 10 • Donut 13 • Donut 15 • Donut 17 | Donut 17 SE • Donut 22 | Donut 22 SE • Donut 30 SE • Peanut 11 | Peanut 16 | Peanut 21 Matching Extensions: • All harness versions | Weight pockets and tank belts | Other accessories

8

STANDARD BACKPLATES Aluminum Backplate with Tecline Logo Standard Backplate Aluminum With cut-out Tecline logo Light grey Thickness: 3mm Backplate weight: 850g

Aluminum backplate T15070

Aluminum BP DIR Harness T15014

Matching Donuts: • Donut 10 • Donut 13 • Donut 15 • Donut 17 | Donut 17 SE • Donut 22 | Donut 22 SE • Donut 30 SE • Peanut 11 | Peanut 16 | Peanut 21

Aluminum BP Soft DIR Harness T15014-01

Aluminum BP Comfort Harn.

T15021

Aluminum BP Aluminum BP Comfort Eco Harness Quick Release Harness T15005-5 T15001-5

Matching Extensions: • All harness versions | Weight pockets and tank belts | Other accessories

9

STANDARD BACKPLATES Aluminum Backplate Standard Backplate Aluminum Cut-out „diver flag“ Black Thickness: 3mm Backplate weight: 850g Note: The Tecline backplate soft pads are NOT suitable for this backplate.

Standard Backplate Aluminum, Black 35016-2

Standard Backplate Aluminum, Red 35016-3

Standard Backplate Aluminum, Blue 35016-4

Matching Donuts: • Donut 10 • Donut 13 • Donut 15 • Donut 17 | Donut 17 SE • Donut 22 | Donut 22 SE • Donut 30 SE • Peanut 11 | Peanut 16 | Peanut 21 Matching Extensions: • All harness versions | Weight pockets and tank belts | Other accessories

10

STANDARD BACKPLATES Stainless Steel Backplate 3mm with cut-out Logo Standard Backplate Stainless Steel With cut-out Tecline logo Thickness: 3mm Backplate weight: 2.1kg

Stainl. Steel BP With Logo T15065

Stainl. Steel BP With DIR Harness T15010

Stainl. Steel BP. Soft DIR Harness T15010-11

Stainl. Steel BP Hard Harness T15010-11

Stainl. Steel BP Adjustable Harn.

T15012

Stainl. Steel BP. Comfort Harn.

T15020

Stainl. Steel BP Comfort Eco T15005-1

Stainl. Steel BP Quick Release T15001-1

Matching Donuts: • Donut 13 | Donut 15 | Donut 17 | Donut 17 SE | Donut 22 | Donut 22 SE | Donut 30 SE • Peanut 16 | Peanut 21 Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories 11

STANDARD BACKPLATES Stainless Steel Backplate 3mm without Logo Standard Backplate Stainless Steel Thickness: 3mm Backplate weight: 2.1kg

Stainl. Steel BP Without Logo T15067

Stainl. Steel BP With DIR Harness T15010-2

Stainl. Steel BP Comfort Harness T15020-1

Matching Donuts: • Donut 13 | Donut 15 | Donut 17 | Donut 17 SE | Donut 22 | Donut 22 SE | Donut 30 SE • Peanut 16 | Peanut 21 Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

12

STANDARD BACKPLATES Stainless Steel Backplate 6mm Standard Backplate Stainless Steel Thickness: 6mm Backplate weight: 4.1kg

Stainless Steel BP T15062

Stainless Steel BP With DIR Harness T15015-1

Stainless Steel BP Adjustable Harn.

T15015

Stainless Steel BP Comfort Harn.

T15032

Matching Donuts: • Donut 17 SE | Donut 22 | Donut 22 SE | Donut 30 SE • Peanut 21 Matching Extensions: • All harness versions | Weight pockets and tank belts | Other accessories

13

HARNESSES DIR Harness DIR Harness as a Set Moveable or fixed d-rings Standard or extra firm belt material Weight: 0.4kg | 0.75kg | 0.85kg

DIR Harness Fixed D-Rings T15050

DIR Harness Moveable D-Rings T15050-2

DIR Harness Hard Fixed D-Rings T15050-3

Matching Donuts: All Tecline donuts, all Tecline Peanut versions Matching extensions: • Weight pockets and tank belts | Other accessories

14

DIR Harness Soft Moveable D-Rings T15050-4

HARNESSES Comfort Harness Comfort Harness as a Set Standard or Lady version Weight: 0.92kg | 1.02kg

Comfort Harness T15060

Comfort Harness “Lady�

T15060-2

Comfort Eco Harness T15049-1

Quick Release Harness T15048-1

Matching Donuts: All Tecline donuts, all Tecline Peanut versions Matching extensions: Weight pockets and tank belts | Other accessories

15

HARNESSES Harness Components The following components form the basis for several harness configurations.

Harness Belt Std., 2.2 x 50mm 86128-1

Harness Belt Hard, 2.2 x 50mm 86128-11

Belt Soft „E“ 1.2 x 50mm 86128

Crotch Belt 1.2 x 50mm 86128-0

Crotch Belt Complete T01160

Belt Buckle Stainless Steel T01050

Chinch Adapter 35015

Belt Stopper T06003

Tri Glider T06005

D-Ring 90° T06020

D-Ring 45° T06010

Matching extensions: • All backplates by Scubatech • Weight pockets and tank belts | Other accessories 16

HARNESSES Harness Components The following components form the basis for several harness configurations.

D-Ring for Comfort Harness T01150

Shoulder Pad Black T01060

Shoulder Pad Orange T01060-1

Shoulder Pad Grey T01060-2

Thumbwheels Delrin M8 x 1.25 T08080

Argon Backmount T02180

Mounting Strap 0.85L Alu Tanks T02160

Mounting Strap 1L Alu Tanks T02140

Mounting Strap 1.5L/2L Alu Tanks T02170

Backplate Soft Pad T01140

Backplate Soft Pad „H“ T01142

Backplate Soft Pad „H Lady“ T01144

Backplate Soft Pad „H Mini“ T01146

Stainl. Steel Bolt (Short) With Delrin Nut T01100

Stainl. Steel Bolt (Long) With Delrin Nut T01090

Matching extensions: • All backplates by Scubatech • Weight pockets and tank belts | Other accessories 17

DONUTS FOR SINGLE TANKS Donut 10 Slim Donut for youngsters and persons with 1.30m to 1.50m in height Suitable for up to single tank 7L 200bar 10kg buoyancy Outer material: NYLON HEAVY DUTY 1000 NON BLADE Inner blader: PU420

Donut 10 Black T11002-1

Donut 10 Red T11002-02

Donut 10 Camo T11002-05

Donut 10 Orange T11002-04

Donut 10 Navy Blue T11002-03

Donut 10 Blue T11002-06

Matching backplates: • Carbon backplate • Standard aluminum backplates Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories 18

DONUTS FOR SINGLE TANKS Donut 13 Slim Donut Suitable for up to single tank 12L 200bar 13kg buoyancy Outer material: NYLON HEAVY DUTY 1000 NON BLADE Inner blader: PU420

Donut 13 Black T11003

Donut 13 Red T11004-02

Donut 13 Blue T11004-03

Donut 13 Neon Blue T11004-08

Donut 13 Orange T11004-04

Donut 13 Neon Yell.

T11004-07

Donut 13 Pink T11004-06

Donut 13 Camo T11004-05

Matching backplates: • Carbon backplate • Standard aluminum backplates • Limited (depending on tank size): Standard backplate stainless steel 3mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories 19

DONUTS FOR SINGLE TANKS Donut 15 Slim Donut, suitable for single tank up to 15L 200 bar 15kg buoyancy Outer material: NYLON HEAVY DUTY 1000 NON BLADE Inner blader: PU420

Donut 15 Black T11009

Donut 15 Red T11008

Donut 15 Blue T11009-03

Donut 15 Camo T11009-05

Matching backplates: • Carbon backplate • Standard aluminum backplates • Limited (depending on tank size): Standard backplate stainless steel 3mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

20

Donut 15 Orange T11009-04

DONUTS FOR SINGLE TANKS Donut 17 Slim Donut, suitable for single tank up to 15L 200 bar 17kg buoyancy Outer material: NYLON HEAVY DUTY 1000 NON BLADE Inner blader: PU420

Donut 17 Black T11010

Donut 17 Camo T11010-01

Matching backplates: • Carbon Backplate • Standard aluminum backplates • Limited (depending on tank size): Standard backplate stainless steel 3mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

21

ASYMMETRIC DONUTS Peanut 11 Smallest version of the first an only asymmetric donut for single tanks - for youngsters and persons with 1.30m to 1.50m in height Volume of 11L with a small shape Suitable for up to single tank 10L 200bar Very light: 650g Outer hull made of soft Cordura 1000D, inner bladder made of PU210.

The 3D construction results in a high position of the diver at the surface and thus in more safety.

Apart from this, this shape supports a “perfect configuration”, because the regulator hoses can be configured in an optimal way.

Peanut 11 Black T10960

Peanut 11 Camo T10960-02

Peanut 11 Orange T10960-03

Matching backplates: • Mini backplates • Carbon backplate • Standard aluminum backplates Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

22

ASYMMETRIC DONUTS Peanut 16 Medium version of the first and only asymmetric donut for single tanks Volume of 16L with a small shape Suitable for up to single tank 15L 200bar Very light: 700g Outer hull made of soft Cordura 1000D, inner bladder made of PU210.

The 3D construction results in a high position of the diver at the surface and thus in more safety.

Apart from this, this shape supports a “perfect configuration”, because the regulator hoses can be configured in an optimal way.

Peanut 16 Black T10970

Peanut 16 Camo T10970-02

Peanut 16 Orange T10970-03

Matching backplates: • Mini backplates • Carbon backplate • Standard aluminum backplates • Limited (depending on tank size): Standard backplate stainless steel 3mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories 23

ASYMMETRIC DONUTS Peanut 21 The first and only asymmetric donut for single tanks A big volume (21L) for a single tank donut 21L, but with a rather small shape Suitable for single tanks with 10L to 18L Very light: 650g Outer hull made of soft Cordura 1000D, inner bladder made of PU210.

The 3D construction results in a high position of the diver at the surface and thus in more safety.

Apart from this, this shape supports a “perfect configuration�, because the regulator hoses can be configured in an optimal way.

Peanut 21 Black T11080

Peanut 21 Lady T11100

Peanut 21 Camo T11080-02

Panut 21 Orange T11080-03

Peanut 21 Arctic T11090

Peanut 21 Travel T11150

Matching backplates:

Carbon backplate | Aluminium backplates | Stainless steel backplate 3mm | 6mm Matching extensions:

All harness versions | Weight pocktes/tank belts | Accessories 24

ASYMMETRIC DONUTS Peanut 21 Professional Especially sturdy version of “Peanut 21� with outer hull made of Kevlar Other characteristics like Peanut 21

Peanut 21 Professional Red T11190

Peanut 21 Professional Grey T11170

Matching backplates:

Carbon backplate | Aluminium backplates | Stainless steel backplate 3mm | 6mm Matching extensions:

All harness versions Weight pockets/tank belts Other accessories

25

DONUTS FOR DOUBLE TANKS Donut 17 Special Edition Version “Special Edition” with a special shape for better valve management, more buoyancy at the surface and stable trim 17kg buoyancy Suitable for up to D10 200 bar Outer material: NYLON HEAVY DUTY 1000 NON BLADE, inner bladder: PU420

Donut 17 SE Black T11015-1

Donut 17 SE Red T11015-0

Donut 17 SE Orange T11015-11

Matching backplates: • Carbon backplate • Standard aluminum backplates • Standard backplate stainless steel 3mm • Limited (depending on tank size): Standard backplate stainless steel 6 mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

26

Donut 17 SE Camo T11015-12

DONUTS FOR DOUBLE TANKS Donut 22 Traditional Donut Shape 22 kg buoyancy Suitable for up to D12 200 bar Outer material: NYLON HEAVY DUTY 1000 NON BLADE, inner bladder: PU420

Donut 22 Black T11020

Matching backplates: • Carbon backplate • Standard aluminum backplates • Standard backplate stainless steel 3mm • Standard backplate stainless steel 6 mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

27

DONUTS FOR DOUBLE TANKS Donut 22 Special Edition Version “Special Edition” with a special shape for better valve management, more buoyancy at the surface and stable trim 22 kg buoyancy Suitable for up to D12 200 bar Outer material: NYLON HEAVY DUTY 1000 NON BLADE, inner bladder: PU420

Donut 22 SE Black T11021

Donut 22 SE Red T11021-0

Donut 22 SE Blue T11021-011

Donut 22 SE Camo T11021-013

Matching backplates: • Carbon backplate • Standard Aluminum backplates • Standard stainless steel bckplate 3 mm | 6 mm Matching extensions: All harness versions | Weight pocktes/tank belts | Accessories

28

Donut 22 SE Orange T11021-012

DONUTS FOR DOUBLE TANKS Donut 22 Special Edition Rebreather I Version “Special Edition” with a special shape for better valve management, more buoyancy at the surface and stable trim With cut-out middle part for mounting the donut on rebreathers 22kg buoyancy Suitable for up to D12 200 bar Outer material: NYLON HEAVY DUTY 1000 NON BLADE, inner bladder: PU420

Donut 22 SE Rebreather I, Black T11021-1

Matching backplates: • Carbon backplate • Standard aluminum backplates • Standard backplate stainless steel 3mm | 6mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

29

DONUTS FOR DOUBLE TANKS Donut 22 Special Edition Rebreather II Version “Special Edition” with a special shape for better valve management, more buoyancy at the surface and stable trim With cut-out middle part for mounting the donut on rebreathers Version II with additional straps to guide the hoses 22kg buoyancy Suitable for up to D12 200 bar Outer material: NYLON HEAVY DUTY 1000 NON BLADE, inner bladder: PU420

Donut 22 SE Reb II Black T11021-2

Donut 22 SE Reb II Red T11021-3

Matching backplates: • Carbon backplate • Standard aluminum backplates • Standard backplate stainless steel 3mm | 6mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

30

DONUTS FOR DOUBLE TANKS Donut 30 SE Version “Special Edition” with a special shape for better valve management, more buoyancy at the surface and stable trim 30 kg buoyancy Suitable for up to D20 200 bar Outer material: NYLON HEAVY DUTY 1000 NON BLADE, inner bladder: PU420

Donut 30 SE black T11040

Matching backplates: • Carbon backplate • Standard aluminum backplates • Standard backplate stainless steel 3mm | 6mm Matching extensions: • All harness versions | Weight pockets and tank belts | Other accessories

31

WEIGHT POCKETS, BELTS, ADAPTERS Weight Pocket for Belt Several weight pockets to put on the belt Separate versions for left and right side With and without inner pocket Also with quick release All pockets come with a special screw for mounting the pocket on a backplate.

Weight Pocket Left T01030

Weight Pocket Right T01040

Weight Pocket Left With Inner Pocket T01042-1

Weight Pocket Right With Inner Pocket T01042-2

WP Left “Lady”, Inner Pocket T01042-11

WP Right “Lady”, Inner Pocket T01042-22

Weight Pocket Left Quick Release T01045-1

Weight Pocket Right Quick Release T01045-2

Special Screw & Nut With O-Ring, Long T01103

Weight Pocket Soft Left With Inner Pocket T01047-01

Weight Pocket Soft Right With Inner Pocket T01047-02

Special Screw & Nut With O-Ring, Short T01105 32

WEIGHT POCKETS, TANK BELTS, ADAPTERS Trim Pockets These trim pockets support the optimal trim.

Trim Pockets for 2kg each (pair) T01020

Trimm Pocket 4.5kg (Single) T01024

Poket Long for 6kg Each (Pair) T01027

Matching extensions: • All Harness versions | Other accessories • All Tecline donuts and Peanut systems • All Tecline backplates

33

WEIGHT POCKETS, TANK BELTS, ADAPTERS Tank Belts Tank belts in several versions

Belt with Delrin Buckle T01080

Belt With Stainless Steel Buckle T01081

Matching extensions: • All harness versions | Other accessories • All Tecline donuts and Peanut systems • All Tecline backplates

34

Belt With Stainless Steel Buckle and Sheath T01082

WEIGHT POCKETS, TANK BELTS, ADAPTERS Single Tank Adapters Single tank adapters support the tank position and offer a firm connection between tank and donut.

Several versions/weights To be mounted instead of the integrated adapter, delivered with some donuts.

Delivery with screws

Soft Adapter T01012

Carbon Adapter T01015

Adapter Aluminum, Grey 35015-5

Adapter Stainless Steel (445g) T01010-1

Adapter Stainless Steel (670g) T01010

Screw and Wing Nut, Stainless Steel T01007

Matching extensions: • All harness versions | Other accessories • All Tecline donuts and Peanut systems • All Tecline backplates

35

OTHER ACCESSORIES Pockets Different pockets allow you to carry additional equipment.

Mask Pocket for Belt T01046

Cargo Pocket for Belt T01048-3

Transport Bag with Belt T12340

Matching extensions: • All tecline harnesses 36

Pocket for Waist Belt and Thigh T01048-1

Cargo Pocket for Glueing T01048-2

OTHER ACCESSORIES Inflator Accessories With inflator sets and parts, you may configure and retrofit all Tecline donuts.

Inflator Set, 40cm T11110

Inflator w. Release Valve, 40cm, Old T11111-1

Inflator w. Relase Valve, 50cm, Old T11111

Inflator w. Release Valve, 50cm, New T11110-1

Elbow for Tecline Inflator T11127

Head for Tecline Inflator T11120

Corrugated Hose for Inflator (30cm) T01120

Corrugated Hose for Inflator (41cm) T01130

Corrugeted Hose, Oval (42cm) T01135

Inflator and Tank Valve Tool T07240

Suitable for all Tecline donuts

37

OTHER ACCESSORIES Cutting tools Cutter and knives are a meaningful add-on for your gear.

Eezycut Black T20010

Eezycut Afterglow T20020

Knife Minirazor Alpha Yellow 50015-2

Knife Minirazor Beta Black 50019

Matching extensions: • All Tecline harnesses

38

Knife with Pouch T01070

Knife Minirazor Alpha Black 50015-1

OTHER ACCESSORIES Release Valves Tecline offers two kinds of release valves for older and newer donuts.

Release Valve Old Version T11100-2

Release Valve New Version T11100-22

Suitable for all Tecline donuts

39

SIDEMOUNT SYSTEMS SIDE 16 Tecline Sidemount system with comfort harness Ideal solution for sidemount beginners, due to additional release valve on the back (can be switched for a blind plug) Internal and external weight pockets for up to 16kg of weight 16L buoyancy Integrated, adjustable comfort harness Ready for action - the required hardware and bungees are included.

With this system, NO bolt snaps are included, since the tanks are hooked-up in the bungee loops.

Universal size for simple adjustment Material: Cordura 2000

SIDE 16 T11050 Matching extensions: • Sidemount accessories | Other accessories

40

SIDEMOUNT SYSTEMS SIDE 16 „Avenger“ Variation of the Tecline sidemount system Perfectly suited for ambitious sports- and cave divers As far as configuration and harness adjustment are concerned, the currently simplest sidemount system available.

The harness can be adjusted at the shoulder belts and at the waist belt separately.

Due to its simplicity also well suited for teaching.

Optimized DIR construction For up to 19kg of weight.

Release valve on the back strategically placed (protected in the lower back area) Flat bladder profile, inflator can be placed left and right, the butt plate can be removed.

“Avenger” T11055

“Avenger Maya” T11055-1

“Avenger” Camo T11055-15

“Avenger” Professional T11054

Matching extensions: • Sidemount accessories | Other accessories “Avenger” Transilvania T11055-12

41

SIDEMOUNT ACCESSORIES Pockets The following pockets have been developed especially for Sidemount systems.

The straps simplify tank handling.

Apart from that, you may use accessory pockets.

Back Pocket for “Avenger” T11055-3

Weight Pockets for Sidemount (Pair) T01029

Tank Strap for Stage 5,7L Orange T14012-1

Tank Strap for Stage 5,7L Green T14012-2

Tank Strap for Stage 7L Orange T14012-4

Tank Strap for Stage 7L Green T14012-5

Tank Strap for Stage 11L Orange T14012-7

Tank Strap for Stage 11L Green T14012-8

Matching extensions: • Other accessories

42

SIDEMOUNT ACCESSORIES Hardware These hardware components allow the custom configuration of Tecline sidemount systems.

Battery Holder for Crotch Strap T11055-2

Left D-Ring instead of butt plate T11139

Right D-Ring instead of butt plate T11137

Butt Plate for “Avenger” T11055-4

Tri-Rail for Butt Plate T11055-6

Matching extensions: • Other accessories

43

LEFT

RIGHT

STANDARD

WEIGHT POCKETS

PEANUT 11

PEANUTS

DOUBLE

PEANUT 16

DOUBLE SOFT

PEANUT 21 NEUTRAL

DONUT 17

DOUBLE LADY

PEANUT 21 TRAVEL

DONUT 22

PEANUT 21 ARTIC

QUICK RELEASE

PEANUT 21 LADY

DONUT 17 SE

DONUT 15

DONUT 10

DONUT 13

DOUBLE TANK WINGS

DONUT 22 SE

LONG max 6kg

BIG max 4,5kg

TRIM POCKETS

DONUT 30 SE

SMALL max 2kg

Offers the possibility to personalize and fine tune your wing set to perfection with an extensive range of high quality products.

We provide safe and comfortable diving with the perfect configuration for both the recreational and technical diver.

MONO TANK WINGS

SET CREATOR

QUICK RELEASE

COMFORT STANDARD

DIR FIXED D-RINGS

HARNESSES ONLY

STAINLESS STEEL 3MM

BACK PLATES

STAINLESS STEEL 6MM

COMFORT MINI

DIR STANDARD MOVEABLE D-RINGS

ALUMINIUM 3MM

DIR MINI

COMFORT ECO

DIR HARD WEBBING

CARBON

ALUMINIUM H-SHAPE

COMFORT LADY

DIR SOFT WEBBING

STAINLESS STEEL H-SHAPE

STAINLESS STEEL MINI

DELRIN BUCKLE

MONO TANK BANDS

H-SHAPE GREY KEVLAR

STANDARD

H-SHAPE RED KEVLAR

H-SHAPE STANDARD

BACK PLATE PROTECTIONS

ALUMINIUM MINI

STAINLESS STEEL BUCKLE

H-SHAPE MINI

H-SHAPE LADY

CARBON

ALUMINIUM

STAINLESS STEEL

MONO ADAPTORS

T11074 / T10970-03*

T11080

T11080-02

PEANUT 16 ORANGE

PEANUT 21 BLACK

PEANUT 21 CAMO

T11020

T11010-01

T11010

T11009-05

T11009-04

T11009-03

T11009

T11008

T11004-07

T11004-06

T11004-05

T11004-04

T11004-03

T11004-02

DONUT 17 SE BLACK DONUT 17 SE RED DONUT 17 SE CAMO DONUT 17 SE ORANGE DONUT 22 SE BLACK DONUT 22 SE RED DONUT 22 SE BLUE DONUT 22 SE ORANGE DONUT 22 SE CAMO DONUT 30 SE BLACK

WINGS

T11040

T11021-013

T11021-012

T11021-011

T11021-0

T11021

T11015-11

T11015-12

T11015-0

T11015-1

REF

DOUBLE TANK WING SET

DONUT 15 ORANGE DONUT 15 CAMO DONUT 17 BLACK DONUT 17 CAMO DONUT 22 BLACK

T11072 / T10970-02*

PEANUT 16 CAMO

T11003

STAINLESS STEEL 6MM (4,2KG) STAINLESS STEEL 3MM (2,0KG) STAINLESS STEEL 3MM W/O LOGO (2,1KG) STAINLESS STEEL 3MM H-SHAPE (1,5KG) STAINLESS STEEL MINI H-SHAPE (0,92KG) ALUMINIUM 3MM (0,85KG) ALUMINIUM 3MM H-SHAPE (0,53KG) ALUMINIUM MINI H-SHAPE (0,31KG) CARBON (0,47KG) CHINCH ADAPTER

BACKPLATES

T11190

T11170

PEANUT 21 GREY KEVLAR

PEANUT 21 RED KEVLAR

T11150

T11100

PEANUT 21 TRAVEL

PEANUT 21 LADY

T11090

T11070 / T10970*

PEANUT 16 BLACK

T11002-06

T11002-05

PEANUT 21 ARCTIC

T11064 / T10960-03*

PEANUT 11 ORANGE

T11002-04

T11002-03

T11080-03

T11062 / T10960-02*

PEANUT 11 CAMO

PEANUT 21 ORANGE

T11060 / T10960*

PEANUT 11 BLACK

T11002-02

T11002-01

DONUT 10 BLACK DONUT 10 RED DONUT 10 NAVY BLUE DONUT 10 ORANGE DONUT 10 CAMO DONUT 10 BLUE DONUT 13 BLACK DONUT 13 RED DONUT 13 BLUE DONUT 13 ORANGE DONUT 13 CAMO DONUT 13 PINK DONUT 13 YELLOW DONUT 15 RED DONUT 15 BLACK DONUT 15 BLUE

REF

PEANUTS

REF

WINGS

MONO TANK WING SET

35015

T15072

T15086

T15080

T15070

T15084

T15079

T15067

T15065

REF -

REF T15062

DIR STANDARD FIXED D-RINGS DIR STANDARD MOVEABLE D-RINGS DIR HARD WEBBING MOVEABLE D-RINGS DIR SOFT WEBBING MOVEABLE D-RINGS DIR MINI COMFORT COMFORT ECO COMFORT LADY COMFORT MINI QUICK RELEASE 35015

T15072

T15086

T15080

T15070

T15084

T15079

T15067

T15065

HARNESS ONLY

REF T15062

* BLUE LETTERS - NEW ITEM NUMBER * RED LETTERS - OLD ITEM NUMBER

HARNESS ONLY

REF

T15048-1

T15059

T15060-2

T15049-1

T15060

T15051

T15050-4

T15050-3

T15050-2

T15050

T01015

T01010-1

T01010

35015-5

-

REF

T15048-1

T15059

T15060-2

T15049-1

T15060

T15051

T15050-4

T15050-3

T15050-2

T15050

REF

-

REF

NONE STANDARD H-SHAPE STANDARD H-SHAPE LADY H-SHAPE TRAVEL H-SHAPE MINI H-SHAPE GREY KEVLAR H-SHAPE RED KEVLAR SS BOLT SHORT WITH SS NUT SS BOLT LONG WITH SS NUT

T01103

T01105

T01149

T01148

T01146

T01145

T01144

T01142

T01140

-

REF

SMALL (2 PIECES) BIG (1 PIECE) LONG (2 PIECES)

NONE

TRIM POCKETS

STANDARD (LEFT&RIGHT) DOUBLE (LEFT&RIGHT) DOUBLE (LEFT&RIGHT) SOFT DOUBLE (LEFT&RIGHT) LADY QUICK RELEASE (LEFT&RIGHT)

NONE

REF

T01103

T01105

T01149

T01148

T01146

T01145

T01144

T01142

T01140

-

T01027

T01024

T01020

-

REF

T01045-1 + T01045-2

T01042-11 + T01042-22

T01047-01 + T01047-02

T01042-1 + T01042-2

T01030 + T01040

-

REF

-

REF SMALL (2 PIECES) T01020 T01024 BIG (1 PIECE) LONG (2 PIECES) T01027

NONE

TRIM POCKETS

WEIGHT POCKETS

T01080 DELRIN BUCKLE STAINLESS STEEL BUCKLE T01081 STAINLESS STEEL BUCKLE T01082 WITH SHEATH

NONE

BACKPLATE PROTECTION NONE STANDARD H-SHAPE STANDARD H-SHAPE LADY H-SHAPE TRAVEL H-SHAPE MINI H-SHAPE GREY KEVLAR H-SHAPE RED KEVLAR SS BOLT SHORT WITH SS NUT SS BOLT LONG WITH SS NUT

MONO TANK BANDS

BACKPLATE PROTECTION

NONE ALUMINIUM (0,27KG) STAINLESS STEEL (0,67KG) STAINLESS STEEL (0,45KG) CARBON (0,15KG)

MONO ADAPTORS

DIR STANDARD FIXED D-RINGS DIR STANDARD MOVEABLE D-RINGS DIR HARD WEBBING MOVEABLE D-RINGS DIR SOFT WEBBING MOVEABLE D-RINGS DIR MINI COMFORT COMFORT ECO COMFORT LADY COMFORT MINI QUICK RELEASE

Ask your local Tecline dealer for more detailed information.

Slight differences in color may be caused due to color reflection, lighting, background etc.

Which color are you?

T01045-1 + T01045-2

T01042-11 + T01042-22

T01047-01 + T01047-02

T01042-1 + T01042-2

T01030 + T01040

DONUT & PEANUT COLORS

STANDARD (LEFT&RIGHT) DOUBLE (LEFT&RIGHT) DOUBLE (LEFT&RIGHT) SOFT DOUBLE (LEFT&RIGHT) LADY QUICK RELEASE (LEFT&RIGHT)

NONE

WEIGHT POCKETS

STAINLESS STEEL 6MM (4,2KG) STAINLESS STEEL 3MM (2,0KG) STAINLESS STEEL 3MM W/O LOGO (2,1KG) STAINLESS STEEL 3MM H-SHAPE (1,5KG) STAINLESS STEEL MINI H-SHAPE (0,92KG) ALUMINIUM 3MM (0,85KG) ALUMINIUM 3MM H-SHAPE (0,53KG) ALUMINIUM MINI H-SHAPE (0,31KG) CARBON (0,47KG) CHINCH ADAPTER

BACKPLATES

Item Number

Email:

Phone:

Address:

Name:

Item Name

MY PERFECT CONFIGURATION

Quantity

Item Number

Notes:

Item Name

Quantity

TECLINEDIVING.EU

IS A BRAND OF

Scubatech Sp. z o.o. ul. Lubieszyńska 2 72-006 Mierzyn POLAND

YOUR AUTHORIZED TECLINE DEALER:

Photo: MICHAL SEVECEK