Dispensing Needles by Subrex – Advancing the Science of Fluid Delivery
Keyword - Dispensing needles There are a wide variety of industries that require dispensing needles on a daily basis. Three of the major industries include automotive, airplanes and electrical industries. The way in which the dispensing needles are used varies from one industry to the other. However, the basic function of dispensing needles is the same; to dispense adhesive or other kinds of viscous liquids that may be hard to handle without the help of such precision instruments. The function of these kinds of instruments may be smaller than other instruments used in the above mentioned industries, but it is certainly one that cannot be ignored. There are a wide variety of Dispensing needles available by Subrex. They include different sizes as well as those with different wall thickness. They are made in such a manner that they are both effective and low cost. This makes it easier for them to be bought in bulk as they are durable as well. Being made from the deep drawing process, they have a smooth interior wall and the thickness varies according to the kind of needle being made. The deep drawing process of manufacture allows them to be resistant to any kind of deformation. It also enhances their ability to withstand high temperatures. This proves to be particularly useful when being used to dispense extremely hot liquids. The adhesive or liquid can be dispensed effectively without deforming the dispensing needle itself, thus proving its durability. The material is top-notch and of an excellent quality. The conical shape and thin wall of the Dispensing needles made by Subrex, enables them to be veryaccurate. It also speeds up the whole process of adhesive application. It does not, however, need to be an adhesive for the dispensing to be accurate, it can be almost any liquid, regardless of the viscosity and the results will still be just as accurate. All of the factors lead up to this accuracy and this is also why these needles are so widely used. They are both cost effective and durable, a combination that is hard to come by usually. The use of dispensing needles in industries like the airplane and automotive industry is basically for dispensing adhesive, but it is not confined to this. The use of dispensing needles arises when there are large parts of machinery that need to be assembled in an orderly and neat fashion. The accuracy and speed required for this task can only be achieved by using dispensing needles, either automated or manually. The dispensed liquid is pushed out at the slightest of pressure and does not stick to the tip of the needles. This makes for a clean break and there is no build up on the nozzle’s tip either. The different kinds of dispensing needles can be seen on the Subrex website. All of the products are available and can be ordered. Some industries may require the needles to be covered when not in use because of the nature of liquid being dispensed, for that, there are covers available as well. http://subrex.com/dispensing-needles.php