90, 168-169, 172 Bessey........................................41,42 Bit-Gripper

ROUTER BIT BEARINGS MODIFY CUTTING PROFILES

Use for replacement or to alter the cut of an existing bit for novel or unusual profiles. Top quality, sealed for life bearings suitable for any router bit use.

954-020 954-027 802-038 954-034 802-039 954-041 954-048 954-055 954-062 802-041 954-069 802-042 954-076 802-043 954-083 OD ID H 1/4" 1/8" 3/32" 3/8" 1/8" 5/32" 3/8" 5/32" 1/8" 3/8" 3/16" 1/8" 3/8" 1/8" 3-16" 3/8" 1/4" 1/8" 1/2" 3/16" 3/16" 1/2" 1/4" 3/16" 5/8" 1/4" 3/16" 5/8" 1/4" 1/4" 3/4" 1/4" 9/32" 3/4" 1/4" 1/4" 3/4" 1/2" 3/16" 7/8" 5/16" 5/16" 1-1/8" 1/2" 5/16" Each 5+ 10+ $3.79 $3.39 $3.29 $3.79 $3.29 $3.09 $1.49 $1.24 $1.16 $3.89 $3.39 $3.29 $2.69 $2.33 $2.17 $3.79 $3.29 $3.19 $3.79 $3.29 $3.09 $3.79 $3.29 $3.19 $5.49 $4.79 $4.49 $1.49 $1.24 $1.16 $5.79 $5.09 $4.79 $1.49 $1.25 $1.17 $5.79 $5.09 $4.79 $4.29 $3.69 $3.49 $5.89 $5.19 $4.89 METRIC OD ID H 954-090 22mm 8mm 7mm 826-405 26mm 10mm 8mm 954-097 32mm 12mm 9.9mm 954-111 35mm 15mm 11mm 954-104 42mm 25mm 9mm Each 5+ 10+ $2.99 $2.60 $2.41 $2.29 $1.97 $1.84 $6.59 $5.89 $5.49 $6.59 $5.79 $5.49 $15.79 $13.79 $12.89

BEADING BIT BECOMES A ROUNDOVER BIT AND VICE VERSA

Two bits for little more than the price of one.

887-628 887-649 Roundover bit to beading bit 3/16" ID x 3/8" OD x 1/8"H Beading bit to roundover bit 3/16" ID x 1/2" OD x 3/16"H $8.59 $7.49

BIT GRIPPER THE PORTABLE COLLET THAT CONTROLS BIT ROTATION WITHOUT WRENCHES OR CLAMPS.

Operation is simple to loosen or tighten a router bit fastener simply insert the bit into the appropriate 1/4” or 1/2” bore. Works like a portable collet that controls bit rotation without the use of a wrench or clamp. Cut fingers or shank damage due to slipping has been virtually eliminated. Use the Bit Gripper as a handheld device, clamp it to a flat surface, or secure it in your bench vise. Made from 6061 Aluminum. Made in the USA.

NEW!

Magnet

Side View

Opposite Side

177-428 Bit Gripper Router Bit Vise

STEEL SPLIT BUSHINGS

Designed to securely hold small shank router bits in 1/2" or 1/4" collets. Measures 1-1/4" long with a split the full length.

826-035 826-042 826-049 826-056 826-063 826-070 OD ID 1/2" 3/8" 1/2" 9mm 1/2" 7.5mm 1/2" 5.75mm 1/4" 1/8" 1/2" 1/4" Magnet

Each 3+ 5+ $24.95 $23.45 $22.29

Each 3+ $12.89 $11.49 $11.69 $10.39 $11.69 $10.19 $11.69 $10.39 $13.39 $11.79 $14.49 $12.69

Standard Metric

WOODTEK® ROUTER BIT TUNE-UP KIT

Both sets include bearing lube. Standard Bearing Set: (ID X OD): 3/16" x 1/2", 1/4" x 5/8", 3/16" x 3/8", 1/4" x 3/4". Metric Set: (ID X OD): 10mm x 26mm, 12mm x 32mm, 8mm x 22mm.

Each $12.89 $16.19 $1.99 3+

CHANGE BITS IN SECONDS WITH A PATENTED QUICK CHANGE ROUTER CHUCK

The Eliminator lets you change bits with a turn of a 5/32" T-handle hex wrench (not included). No more banged knuckles! Holds bits as securely as traditional collets. Just thread it onto the spindle and tighten it with a wrench. 1/2" router bits mount directly into chuck - use optional sleeve for 1/4" bits. Made of hardened, alloy steel and precision balanced. USA. • #1 fits Porter-Cable® 630, 690, 691, 693, 7518, 7519, 7536, 7537, 7538, 7539 routers only (does not fit any 890 series routers). • #2 fits DeWalt® 625, Elu® and freud® FT2000EP and FT1700VCE and all Festool®, Trend®, and Fein® 1/2" routers. • #3 fits DEWALT® 616, 618, 621, Hitachi® M12VS, M-12VC, M-12SC routers. • #4 fits Bosch® 1613AEVS, 1617EVS, 1618EVS, 1619EVS routers.

948-683 135-935 135-938 135-941 948-690 #1 Eliminator quick-change router chuck #2 Eliminator quick-change router chuck #3 Eliminator quick-change router chuck #4 Eliminator quick-change router chuck 1/4" bit sleeve