Sutton Tools Export Catalogue 2021 by Sutton Tools

2021 Effective July

CATALOGUE English Français Italiano

Español

Skip intro pages

We've made it easier to find the right tool fast... For easy tool reference, you will find an extensive application based index at the start of each section.

ISO Sutton Standard

German International American Standard Standard Standard

British Standard

Stub

Regular

Long

Extra Long

Plain

Form B

Form HE

Threaded

Stepped

Reduced

Tanged

5x 6x 8x 10 x diameter diameter diameter diameter (DIN 1412) Form A Form B Form C Special

12 x diameter

Morse Taper

Square Drive

Normal

14 x diameter Carbide Normal IK Double Margin 1 2

4 3

Countersink Geometry

Radius Lips

Facet Standard

4x diameter

High Speed Z-Axis Cutting Control

Internal Coolant

Blind Hole Through Hole Through Blind Hole Thread Straight Flute Straight Flute Hole Gun Spiral Flute Forming

Crosshole

Single Flute

3 Flutes

Internal Coolant (Helical)

Internal Coolant (Axial)

Internal Coolant (Radial)

Deep Hole

Single Coolant Groove

Multi Coolant Groove

Unified Coarse

Unified Fine

Unified Series

Unified Extra Fine

(BSPT)

Dryseal National Dryseal Straight Pipe Taper Taper

Metric Fine

Cutting Directions Cutting Edge Forms

Slotting

Profiling

HRS

STF

HRS

STF

Geometry

Thread Forms

UNEF Metric Coarse

British British Steel (BSPPL) Association Standard Brass Conduit Sealing Pipe

Endmill Application

Japanese Standard

4xd 3x diameter

Tap Application

Drill Application

Depth

Shank

Length

Standard

These icons below can be found on the product pages throughout the catalogue, and at a glance the characteristic features of the tool can be identified.

Finishing Universal Roughing

(BSPF) Whitworth Whitworth Coarse Fine

Unequal

45º

Radius

Chamfer

Reduced Neck

Micro Rake Geometry Correction

We have been manufacturing quality cutting tools in Australia since 1917 and the fact that we are manufacturing in Australia is becoming an important part of our message. Third-generation family member Jim Sutton

Made in Australia, exported to the world. Proud supporter of the Australian Made Campaign Sutton Tools is the only production manufacturer of cutting tools in Australia. Promoting Australian Made tools is about more than raising awareness of quality products — it’s about encouraging growth in the Australian Manufacturing Industry. Sutton Tools supports and promotes Australian made products, with the aim of creating more opportunities for all Australians. Every dollar invested in products made here benefits our country in terms of jobs created, goods and services purchased, taxes paid and welfare payments reduced. When buying Sutton Tools products that carry the Australian Made logo, you can buy with confidence, knowing they are made to Australian standards, exceeding expectations. Sutton Tools growth into the global market began over 20 years ago. About 40% of Sutton Tools products are sold overseas, with integrated logistics and warehousing in Europe. Sutton Tools export strategy further proves the quality of Australian Made product and strengthens local jobs and manufacturing in Australia into the future.

View our video on the history of Sutton Tools

www.suttontools.com

William Henry Sutton Arrived In Australia William Henry Sutton, a British Immigrant, opened a tool room at Thompson’s Foundry at Castlemaine. He was recognised as one of the leading tool engineers in England before his departure to Australia.

1912

1917

Business Quadrupled It soon became evident to local manufacturers’ they could now buy domestically produced tools of equal or better quality than those from overseas! With the original factory ‘bursting at the seams’, Sutton Tool & Gauge moved to a 13,000 square foot factory in Northcote, Melbourne.

1933

Start To An Iconic Australian Family Brand Nearing the end of World War 1 in 1917 after been seconded back to the UK to help with the war effort, W. Henry Sutton at the age of 54, established the Sutton Tool & Gauge Manufacturing Co. at Plant Street Westgarth, Victoria.

1936

A Broader Market Goal Sutton Tool & Gauge first export was to New Zealand, a consignment of reamers.

1939

1940

Thread Production

The Next Generation

Sutton Tool & Gauge commenced the manufacture of Thread Tooling, expanding its product portfolio.

Both sons of W. Henry, Henry George Sutton and Leslie Sutton became managing directors of the business whilst William Henry at age 77 continued to take an active interest.

1936 - Thread tooling

1933 - Northcote factory

William Henry Sutton

1917 - Westgarth factory

1917 - the start to an iconic Australian family brand, manufacturing cutting tools for distribution throughout Australia...

From left to right: Bill Sutton, picture of William Henry Sutton, Henry George Sutton, Jim Sutton, Leslie Sutton

Industry Legend

Ground-From-Solid

William Henry Sutton, born 1863 - died 1950, a highly regarded tool and gauge engineer prior to the founding business owner of Sutton Tool & Gauge. William was a pioneer of the Australian Engineering Industry.

A team of engineers were sent across the globe to investigate the best method of producing the finest drill in the world. They came back with the “Groundfrom-Solid” process. All endmills, slot drills and taps up to ½" diameter were produced by this method. Sutton Tools purchased and installed specialised equipment and was considered to have one of the most modern facilities in the world.

1950

1960

1959

Increasing Demand The demand for high quality tools made by Sutton’s continued, and to meet with increasing sales the firm opened another 45,000 square foot factory in Thomastown.

Company Name Changed To Sutton Tools With the expansion into a greater range of products the company officially changed its name from ‘Sutton Tool & Gauge’ to ‘Sutton Tools’.

1961

1970

Manufacturing of Jobber Drills

Third Generation

Sutton Tool & Gauge commenced manufacturing Jobber Drills in Thomastown.

1971

Sutton Tool & Gauge acquired an adjoining factory in Thomastown. The third generation Suttons, Bill and Jim, consolidated and extended Sutton Tools’ position in the market, through their absolute commitment to quality, innovation and persistence.

1989 Surface Technology Coatings Sutton Tools established Surface Technology Coatings and for the first time could offer physical vapour deposition (PVD) coatings on their products. Previously any coated tools sold in Australia were imported.

1989 - Surface Technology Coatings

1970 - Third Generation

1960 - Ground-from-Solid

1959 - Thomastown factory opens

Our History. Our Tradition.

Achievement of ISO 9001 Accreditation Sutton Tools achieved quality accreditation ISO 9001. The structure of controls and checks throughout the manufacturing process ensures that we continually manufacture products that will exceed customer expectations.

1990

1993

4th Generation During the 1990’s Peter and Robert Sutton joined the family business. Their combined experience and passion in cutting tools has positioned Sutton Tools as an Australian champion in manufacturing.

1994

2008 – The Tech Centre

1993 - ISO 9001 Accreditation

1994 – New Zealand Manufacturing

...of course, after a proud history spanning over 100 years it’s always tempting to keep looking to the past. However, it is just as important, if not more so, to look to the future.

A Global Vision

Export Milestone

Robert Sutton was appointed Sutton Tools first Export Manager. His vision leads to rapid expansion into the ‘high performance’ product category to compete in the global market.

Sutton Tools sold the 5 millionth drill bit to Germany.

1995

2006

Manufacturing and Distribution Centre in New Zealand Sutton Tools purchased Patience & Nicholson New Zealand (Evacut) to increase manufacturing capacity.

2000

2008

Asia Distribution Centre

Australian Made License

To provide a greater level of service to the company’s South East Asian customers, an office and distribution centre was established in Singapore.

Sutton Tools becomes licensee of the Australian Made campaign, reaffirming our commitment to Australian Manufacturing.

Sutton Tools Europe Sutton Tools Europe was established with an office and warehouse based in the Netherlands.

2008

2009

2016 – 4th Generation Suttons

2010 – Hall of Fame induction

2009 – Partnership with DMTC

2009 – Australian Made License

Jim Sutton's acceptance speech at the Victorian Manufacturing Hall of Fame induction

2009

From left to right: Robert Sutton and Peter Sutton

Victorian Manufacturing Hall of Fame

4th Generation Suttons took the helm

Purchase of Carbitool Pty Ltd

The Victorian Government, in partnership with the Victorian Industry Manufacturing Council, inducted Bill and Jim Sutton into the Victorian Manufacturing Hall of Fame Honour Roll for their outstanding contributions to manufacturing excellence.

Peter and Robert Sutton took the helm to move Sutton Tools into the next century.

Sutton Tools acquired Australian manufacturer Carbitool Pty Ltd to expand the carbide tools and wood working range.

2010

2016

2018

The Tech Centre

Partnership with DMTC

Facilities for specials and regrinding services were established to support the market in high performance cutting tools, with a specific focus on carbide.

Sutton Tools becomes a member of Defence Materials Technology Centre (DMTC) a collaborative venture between industry, universities and government research agencies. Sutton Tools invests in state-of-theart equipment, bolstering its R&D capability to produce new advancements in cutting tools at the highest level.

2012

USA Warehouse and Distribution Centre Sutton Tools USA was established. With a Warehouse and Distribution Centre in North America, Sutton Tools can now be recognised as a global company providing world class cutting tools.

2017

Sutton Tools Celebrate 100 Years Awarded Manufacturer of the year at 2017 Victorian Manufacturing Hall of Fame.

Manufacturing Without Compromise. Sutton Tools endeavours to minimise impacting factors that will reduce its carbon footprint and environmental impact.

Commitment to Quality A well-managed structured system embracing all manufacturing processes from the floor up, driven with a continuous improvement policy ensures that our customers can be completely satisfied with the quality of our products. This includes all aspects of the purchasing process, with full traceability from the moment customers place the order to delivery. Sutton Tools is a leader in the field of the conventional grinding and advanced super abrasive grinding. This Grinding Technology ensures that our cutting tools are of the highest accuracy and performance. Modern CNC machines give pick-and-place robot handling functions, that not only give repeatable quality operations but a safer work place environment. The structure of controls and checks throughout the manufacturing process, backed by documented procedures and support personnel ensures that we continually manufacture products that will exceed customer expectations.

www.suttontools.com

Research & Development. Through formal cooperation with industry, leading Universities, research organisations and government, we continually seek technological advancements to better serve industry. Today’s metal working industry faces the relentless challenges of producing product faster, better and cheaper than before. Such challenges require innovative technology to world standards. Sutton Tools meets this challenge, through its commitment to research and development. Sutton Tools R&D includes all aspects of manufacturing and development. We simulate actual production conditions to optimise tool design, and benchmark tool performance to exceed market standards. Sutton Tools Engineering Department has state of the art technology in measuring and design equipment which has been critical in our continual development of machine tools.

www.suttontools.com

Sutton Tools has been successfully delivering quality cutting tools to customers throughout Australia and the world since 1917.

Reliable Customer Service. We are here to help you Stock requirements and needs can vary from customer to customer and Sutton Tools has implemented varied ordering systems to receive orders and seamlessly process them. We combine the latest logistic technology (freight management systems) with personalised customer service to ensure that you get the products you order, when you need them on time, every time. Our comprehensive customer service comprises: • • • •

EDI and internet ordering Fully integrated ERP system Automatic delivery and order confirmation Quick backorder response

Sutton Tools Online Tool Shop Sutton Tools e-Sales helps to increase service levels through real-time availability of information. Tool Shop will extend our customer service by offering online access to our products 24 hours a day, 7 days a week. Tool shop gives you the ability to: • • • •

Check stock availability Place orders online Track the progress of your order Check your order History

To apply for a Tool Shop account please contact toolshop@sutton.com.au

www.suttontools.com

We have over 20,000 SKUs and our stock availability consistently averages in the high 90%.

Distribution and Logistics. Global Distribution Network Our International Distribution Centre uses modern radio frequency scanning technology coupled with the latest carousel and stock replenishment systems which allows accurate stock control and efficient warehouse operation. We have over 20,000 SKUs and our stock availability consistently averages in the high 90%. From a customer perspective, this provides confidence in breadth and depth of stock cover and reliable delivery service. Our Distribution Centre comprises: • Modern radio frequency scanning technology and latest carousel and stock replenishment systems • Computerised dispatch system • Warehousing over 20,000 SKUs • Picking over 10,000 items daily • Dispatch of over 1,000 consignments daily • Order and dispatch within one hour turnaround • Global Storage Area in excess of 5,000m²

www.suttontools.com

Meeting Your Exact Requirements. Special Tools Sutton Tools use state-of-art CNC tool grinding equipment, and manufacturing processes to produce specialised cutting tools, distribute to industries such as plumbing, electrical, automotive, aerospace, marine, transport, construction, surgical, manufacturing and agriculture. We use only the very best European grades of materials including powder metallurgy, HSS cobalt and ultra-fine grain carbide. Materials are complimented by the latest generation of thin film PVD coatings, providing many advantages in tool life, component surface finishes and the ability for the tools to operate in low or minimum coolant environments, making them more environmentally friendly. All tools are subject to stringent quality and performance checking and testing to ensure best results. Our customers can benefit from the advantages of our reliable cost effective world’s-best practice manufacture, supply and support capabilities, now and well into the foreseeable future. Our Special Tools division offers express service on non-standard taps and other cutting tools.

www.suttontools.com

One-Stop-Shop Regrinding and Coating. Australia’s only company to provide regrinding, coating and heat treatment on the one site.

The regrinding service significantly reduces tooling costs over buying new tools. Our customers benefit from Sutton Tools advanced super abrasive grinding expertise providing high accuracy and quality. All tools are subject to stringent quality and performance checking and testing to ensure best results.

Surface Technology Coatings Service

Cost benefits of regrinding your tools Cost Reduction – New vs Reconditioning 100 Total costs (%)

Regrinding Service

0 -32%

-43%

-49%

25 0

2 1 No. of Regrinds

Example: D332 10mm 5xD IK R30N Carbide Drill, AICrN coated.

Complementing our regrind facility, Surface Technology Coating (STC) provides a Physical Vapour Deposition (PVD) coating service, and is at the forefront of heat treatment and surface engineering technology. In addition to providing PVD coating, STC provides plasma nitriding and vacuum heat treatment for various tools and components. Our unique position enables us to provide tailored solutions to a wide range of friction and wear problems.

www.suttontools.com

Sutton Tools Expert Tool Selector. www.suttontools.com/expert-tool-selector

Advice at your fingertips Sutton Tools Expert Tool Selector enables easy tool selection for your machining task. The Expert Tool Selector will recommend the right tool for your application, with advice on suitable cutting parameters. Simply select your work piece material, and enter your machining operation and setup to get the best advice in 5 easy steps. Choose: Step 1 - W orkpiece material classification Workpiece material groups Step 2 - Machining Task Step 3 - Machine Setup Step 4 - T ool recommendations Step 5 - V iew Technical Report Recommended cutting conditions Tool specifications Stock availability

www.suttontools.com

N Drills Carbide, 3 x D, R30 up to 1400N/mm² • Suitable for materials al chip control • Strong core e conditioning for optim • Micro geometry & surfac life • AlCrN for maximum tool

30°, type N Forets carbure 3xD, hélice jusqu’à 1400 N/mm²

• Convient aux materiaux ux un bon controle des copea • Noyau renforcé ment surface optimisé pour • Micro géométrie et traite durée de vie maximum une • Revêtement AlCrN pour

D, R30 N Punte Metallo Duro, 3 x a 1400N/mm²

• Ideale per materiali fino lo un ottimo controllo trucio • Nocciolo rinfor zato imento tagliente ideale per • Micro geometria & rivest vita utensile re la • AlCrN per massimizza

x D, R30 N Brocas de Metal Duro, 3 hasta 1400N/mm² ado para materiales

• Adecu o de la viruta ficie para un control óptim • Núcleo Refor zado icionamiento de la super a • Micro geometría y acond vida útil de la herramient a máxim una para • AlCrN

P Steel M

Stainless Steel

Item #

VHM

AlCrN

R30

140° Form C

Item #

Item # D324 1032 D324 1040 D324 1050 D324 1060 D324 1070 D324 1080 D324 1090 D324 1100 D324 1110 D324 1111 D324 1120 D324 1130 D324 1140 D324 1150 D324 1160 D324 1170 D324 1180 D324 1190 D324 1191 D324 1200 D324 1250 D324 1269 D324 1280 D324 1300 D324 1349 D324 1350 D324 1380 D324 1400

D325 1032 D325 1040 D325 1050 D325 1060 D325 1070 D325 1080 D325 1090 D325 1100 D325 1110 D325 1111 D325 1120 D325 1130 D325 1140 D325 1150 D325 1160 D325 1170 D325 1180 D325 1190 D325 1191 D325 1200 D325 1250 D325 1269 D325 1280 D325 1300 D325 1349 D325 1350 • D325 1400 H

38.2 37.1 37.2 37.3 37.4 37.5 38.1 K 31 32 33 34 35 36 25 26 27 28 29 30 19 20 21 22 23 24 14.2 14.3 15 16 17 18 9 10 11 12 13 14.1

Metals K Cast Iron N Non-Ferrous

Hard Materials S Titanium & Super Alloys H

NOTE: HB & HE shanks

• • •

140° Form C

A0210

• • •

N R30

D325

D324 A0210

• • • • • • • • •

D323 D324 D325

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

VDI 3323

VHM AlCrN

D323 1032 D323 1040 D323 1050 D323 1060 D323 1070 D323 1080 D323 1090 D323 1100 D323 1110 D323 1111 D323 1120 D323 1130 D323 1140 D323 1150 D323 1160 D323 1170 D323 1180 D323 1190 D323 1191 D323 1200 D323 1250 D323 1269 D323 1280 D323 1300 D323 1349 D323 1350 D323 1380 D323 1400

• • • • • • • • • • • • • • • • • • • • •

ISO

d2 (h6)

l1 102

• • •

d1 (m7) inch mm

1032 10.32 13/32 102 1040 10.4 102 1050 10.5 102 1060 10.6 102 1070 10.7 102 1080 10.8 102 1090 10.9 102 1100 11.0 102 1110 11.1 102 1111 11.11 7/16 102 1120 11.2 102 1130 11.3 102 1140 11.4 102 1150 11.5 102 1160 11.6 102 1170 11.7 102 1180 11.8 102 1190 11.9 102 1191 11.91 15/32 102 1200 12.0 107 1250 12.5 107 1/2 12.70 1269 107 1280 12.8 107 1300 13.0 107 2 17/3 1349 13.49 107 1350 13.5 107 1380 13.8 107 1400 14.0

D323 A0210

39.1 39.2 40 41

• • •

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 474  Size Ref.

• Optimal • Effective available, subjec t to lead

time.

Contents

Sutton Tools Code System – explained

Carbide Drills

Sutton Tools item # system makes it easier to identify a product. The codes are based on a universal prefix and suffix system.

Catalogue Code

Size Ref.

D323 1050

HSS Drills

149

C - Countersinks D - Drills E - Endmills L - Literature R - Reamers T - Taps Z - Tool Holders / Chucks

Prefix (Catalogue Code) – is alpha numeric, and is unique to a specific product range. The letter is relevant to the type of tool, and the number refers to a product range.

Item # D323 1050 = D(Drill) 323(Carbide 3xd) 1050(10.5mm)

Suffix (Size Ref.) – in most cases is relevant to the diameter or size reference of an item and is based on a metric value.

ISO Taps

For example 5mm = 0500, and 1/4" = 0635 (inch converted to decimal).

Understanding your Sutton Tools Catalogue

Tool Holding

Material This highlights what the product is made of. (e.g. VHM = Carbide, HSS = High Speed Steel) For the full list of explanation, refer to page 509 of the technical information section.

201

Product Group (A0202 – Z1108) These codes enable our distributor partners to identify their pricing structure on any particular product.

DIN Taps

Carbide Endmills

435

Symbols For all of our product pages you will find symbols which depict what specifications these products were made to. Symbols have been used to simplify product identification. A full list of symbols can be found at the start of this catalogue.

343

Surface Finish Many of our products have various surface coatings to improve the performance. Surface coatings improve productivity by increasing speeds and feeds and reducing friction related problems.

Some common examples are:

Standard

Regular length

5 x D max. working depth

60° Metric thread form

HSS Endmills

449

Vc Page # - Speed & Feed Data Vc Page #: 474 

This graphic indicates what page number to reference in the Technical Information section of this catalogue for the speed and feed data of the tool.

Reamers

Technical Information

467

Benefits of the coding system • Range identification simplified. • Search online ‘Expert Tool Selector’ by range.

197

Suffix can also refer to set code or number of pieces in a set.

Contents Drills Carbide Finder

Drills Carbide, 3 x D, R15 NH.........................................................................................40 Drills Carbide, 3 x D, R30 N............................................................................................22 Drills Carbide, 3 x D, R30 N, IK......................................................................................28 Drills Carbide 3 x D, R30 VA Black Magic.........................................................................33 Drills Carbide, 3 x D Straight Flute...............................................................................38 Drills Carbide, 5 x D, R25 N............................................................................................41 Drills Carbide, 5 x D, R30 N............................................................................................43 Drills Carbide, 5 x D, R30 N, IK......................................................................................48 Drills Carbide 5 x D, R30 VA Black Magic.........................................................................57 Drills Carbide, 8 x D, R30 N, IK......................................................................................52 Drills Carbide, 8 x D, R30 N, IK......................................................................................53 Drills Carbide, 12 x D, R30 N, IK...................................................................................62 Drills Carbide, Centre.........................................................................................................67 Drills Carbide, Extra Long.................................................................................................66 Drills Carbide, NC Spotting..............................................................................................68 Drills HSS Finder

Countersinks Counterbore...........................................................................................147 Countersinks Three Flute, 90°, DIN 335...............................................................146 Drills Centre.......................................................................................................................144 Drills Extra Long, DHXL-1.............................................................................................129 Drills Extra Long, DHXL-2.............................................................................................130 Drills Extra Long, DHXL-3.............................................................................................131 Drills Jobber...........................................................................................................................76 Drills Jobber, DHJ.................................................................................................................90 Drills Jobber, DXJ..................................................................................................................93 Drills Jobber, Heavy Duty............................................................................................................87 Drills Jobber, R40, InOx.............................................................................................................101 Drills Jobber, R40 UNI.......................................................................................................95 Drills Jobber, R40 UNI, IK.................................................................................................99 Drills Jobber, R40 UNI, IK..............................................................................................100 Drills Jobber, R40 VA, Black Magic.....................................................................................104 Drills Long Series.............................................................................................................122 Drills Long Series, DHL...................................................................................................127 Drills Morse Taper Accessories...................................................................................139 Drills Morse Taper Shank..............................................................................................132 Drills Morse Taper Shank, Heavy Duty............................................................................136 Drills Morse Taper Shank, Long Series....................................................................138 Drills NC Spotting............................................................................................................145 Drills Panel, Double Ended...........................................................................................143 Drills Panel, Single Ended.............................................................................................142 Drills Reduced Shank.....................................................................................................140 Drills Sets...............................................................................................................................74 Drills Stub, Blu..................................................................................................................107 Drills Stub, CNC................................................................................................................110 Drills Stub, DXS.................................................................................................................113 Drills Stub, R40 UNI........................................................................................................115 Drills Stub, R40 UNI........................................................................................................117 Drills Stub, R40 VA Black Magic..........................................................................................118 ISO Taps Finder

150

ISO Taps 8UN, Straight Flute, N.................................................................................180 ISO Taps BSF, BSB & BA, Straight Flute, N.............................................................188 ISO Taps BSF, BSB & BA, Straight Flute, N.............................................................189 ISO Taps BSW, Forming, Single Coolant Groove...................................................186 ISO Taps BSW, Gun, N....................................................................................................184 ISO Taps BSW, Machine Nut, Long Shank..............................................................187 ISO Taps BSW, Spiral Flute, N.....................................................................................185 ISO Taps BSW, Straight Flute, N.................................................................................181 ISO Taps BSW, Straight Flute, N, Left Hand...........................................................183

ISO Taps Metric Fine, Gun, N.......................................................................................164 ISO Taps Metric Fine, Spiral Flute, N.........................................................................165 ISO Taps Metric Fine, Straight Flute, N....................................................................160 ISO Taps Metric Fine, Straight Flute, N....................................................................161 ISO Taps Metric, Forming, Single Coolant Groove................................................159 ISO Taps Metric, Gun, N.................................................................................................157 ISO Taps Metric, Spiral Flute, N..................................................................................158 ISO Taps Metric, Straight Flute, N..............................................................................152 ISO Taps Metric, Straight Flute, N, Left Hand........................................................155 ISO Taps Metric, Straight Flute, Oversize................................................................156 ISO Taps Pipe, G (BSPF), Straight Flute...................................................................190 ISO Taps Pipe, National Series....................................................................................195 ISO Taps Pipe, Rc (BSPT), Straight Flute.................................................................193 ISO Taps Pipe, Rp & Pg Series, Straight Flute.......................................................194 ISO Taps UNC, Forming, Single Coolant Groove...................................................171 ISO Taps UNC, Gun, N.....................................................................................................169 ISO Taps UNC, Machine Nut, Long Shank...............................................................172 ISO Taps UNC, Spiral Flute, N......................................................................................170 ISO Taps UNC, Straight Flute, N.................................................................................166 ISO Taps UNC, Straight Flute, N, Left Hand...........................................................168 ISO Taps UNEF, Straight Flute, N...............................................................................176 ISO Taps UNF, Forming, Single Coolant Groove....................................................179 ISO Taps UNF, Gun, N.....................................................................................................177 ISO Taps UNF, Spiral Flute, N.......................................................................................178 ISO Taps UNF, Straight Flute, N..................................................................................173 ISO Taps UNF, Straight Flute, N, Left Hand............................................................175 Tool Holding

199

Tool Holding CNC – Rigid Tapping.............................................................................199 DIN Tap Finder

202

DIN Taps 8UN, Spiral Flute, R40 VA.........................................................................312 DIN Taps G (BSPF), Forming, Multi Coolant Groove............................................340 DIN Taps G (BSPF), Gun, Black Magic...............................................................................332 DIN Taps G (BSPF), Gun, N...........................................................................................331 DIN Taps G (BSPF), Gun, VA.........................................................................................333 DIN Taps G (BSPF), Gun, VA PM.................................................................................334 DIN Taps G (BSPF), Spiral Flute, R15N....................................................................335 DIN Taps G (BSPF), Spiral Flute, R40 N...................................................................336 DIN Taps G (BSPF), Spiral Flute, R45 VA.................................................................338 DIN Taps G (BSPF), Spiral Flute, R50 Black Magic.........................................................337 DIN Taps G (BSPF), Spiral Flute, R50 VA PM........................................................339 DIN Taps G (BSPF), Straight Flute, GG.....................................................................330 DIN Taps G (BSPF), Straight Flute, N........................................................................329 DIN Taps Metric Fine, Forming, N..............................................................................294 DIN Taps Metric Fine, Forming, NH...........................................................................295 DIN Taps Metric Fine, Gun, Black Magic.........................................................................280 DIN Taps Metric Fine, Gun, H......................................................................................284 DIN Taps Metric Fine, Gun, N......................................................................................278 DIN Taps Metric Fine, Gun, NH...................................................................................283 DIN Taps Metric Fine, Gun, VA....................................................................................281 DIN Taps Metric Fine, Gun, VA PM............................................................................282 DIN Taps Metric Fine, Spiral Flute, R15 H..............................................................293 DIN Taps Metric Fine, Spiral Flute, R15 N..............................................................285 DIN Taps Metric Fine, Spiral Flute, R40 N..............................................................286 DIN Taps Metric Fine, Spiral Flute, R40 NH...........................................................292 DIN Taps Metric Fine, Spiral Flute, R45 Al.............................................................289 DIN Taps Metric Fine, Spiral Flute, R45 VA DH....................................................290 DIN Taps Metric Fine, Spiral Flute, R50 Black Magic..............................................288 DIN Taps Metric Fine, Spiral Flute, R50 VA PM.........................................................291 DIN Taps Metric Fine, Straight Flute, DC.................................................................275

Contents DIN Taps Metric Fine, Straight Flute, GG................................................................273 DIN Taps Metric Fine, Straight Flute, N...................................................................272 DIN Taps Metric Fine, Straight Flute, VH................................................................277 DIN Taps Metric Fine, Straight Flute, XH.................................................................276 DIN Taps Metric, Forming, Multi Coolant Groove................................................267 DIN Taps Metric, Forming, NH ...................................................................................270 DIN Taps Metric, Forming, No Groove......................................................................266 DIN Taps Metric, Forming, UNI...................................................................................269 DIN Taps Metric, Forming, VHM.................................................................................271 DIN Taps Metric, Gun, Black Magic....................................................................................226 DIN Taps Metric, Gun, H................................................................................................239 DIN Taps Metric, Gun, H................................................................................................240 DIN Taps Metric, Gun, N................................................................................................221 DIN Taps Metric, Gun, N - 6G, 4H, LH......................................................................223 DIN Taps Metric, Gun, N - 6G, 4H, LH......................................................................224 DIN Taps Metric, Gun, N, Extra Length....................................................................225 DIN Taps Metric, Gun, NH.............................................................................................237 DIN Taps Metric, Gun, VA..............................................................................................231 DIN Taps Metric, Gun, VA DH......................................................................................235 DIN Taps Metric, Gun, VA DH......................................................................................236 DIN Taps Metric, Gun, VA PM......................................................................................233 DIN Taps Metric, Gun, W-AZ........................................................................................230 DIN Taps Metric, Gun, W & Cu....................................................................................228 DIN Taps Metric, Spiral Flute, L12 Ti........................................................................263 DIN Taps Metric, Spiral Flute, R10 Ni.......................................................................264 DIN Taps Metric, Spiral Flute, R15 H........................................................................261 DIN Taps Metric, Spiral Flute, R15 N........................................................................241 DIN Taps Metric, Spiral Flute, R15 Ti.......................................................................262 DIN Taps Metric, Spiral Flute, R40 N........................................................................243 DIN Taps Metric, Spiral Flute, R40 N - 6G, 4H, LH.............................................245 DIN Taps Metric, Spiral Flute, R40 N, Extra Length............................................247 DIN Taps Metric, Spiral Flute, R40 NH....................................................................259 DIN Taps Metric, Spiral Flute, R45 Al.......................................................................250 DIN Taps Metric, Spiral Flute, R45 Al.......................................................................251 DIN Taps Metric, Spiral Flute, R45 VA DH..............................................................253 DIN Taps Metric, Spiral Flute, R45 W & Cu............................................................252 DIN Taps Metric, Spiral Flute, R50 Black Magic.........................................................248 DIN Taps Metric, Spiral Flute, R50 VA PM.............................................................255 DIN Taps Metric, Spiral Flute, R50 VA PM, IK.......................................................257 DIN Taps Metric, Straight Flute, DC..........................................................................218 DIN Taps Metric, Straight Flute, GG..........................................................................216 DIN Taps Metric, Straight Flute, GGG.......................................................................217 DIN Taps Metric, Straight Flute, N.............................................................................214 DIN Taps Metric, Straight Flute, VH..........................................................................220 DIN Taps Metric, Straight Flute, XH..........................................................................219 DIN Taps Metric, Synchro, Forming...........................................................................213 DIN Taps Metric, Synchro, Gun...................................................................................209 DIN Taps Metric, Synchro, Spiral Flute, L20..........................................................211 DIN Taps Metric, Synchro, Spiral Flute, R45 Al.....................................................212 DIN Taps Metric, Synchro, Spiral Flute, R50..........................................................210 DIN Taps NPT, Straight Flute, UNI.............................................................................341 DIN Taps RC (BSPT), Straight Flute, UNI.................................................................342 DIN Taps UNC, Gun, Black Magic........................................................................................298 DIN Taps UNC, Gun, H....................................................................................................303 DIN Taps UNC, Gun, N....................................................................................................297 DIN Taps UNC, Gun, NH.................................................................................................301 DIN Taps UNC, Gun, VA..................................................................................................299 DIN Taps UNC, Gun, VA PM..........................................................................................300 DIN Taps UNC, Spiral Flute, R15 H...........................................................................315 DIN Taps UNC, Spiral Flute, R15 N...........................................................................305 DIN Taps UNC, Spiral Flute, R40 N...........................................................................307 DIN Taps UNC, Spiral Flute, R40 NH........................................................................313 DIN Taps UNC, Spiral Flute, R45 VA DH..................................................................310

DIN Taps UNC, Spiral Flute, R50 Black Magic.............................................................309 DIN Taps UNC, Spiral Flute, R50 VA PM.................................................................311 DIN Taps UNC, Straight Flute, GG..............................................................................296 DIN Taps UNF, Gun, Black Magic.........................................................................................321 DIN Taps UNF, Gun, N....................................................................................................320 DIN Taps UNF, Gun, VA..................................................................................................322 DIN Taps UNF, Gun, VA PM..........................................................................................323 DIN Taps UNF, Spiral Flute, R15 N............................................................................324 DIN Taps UNF, Spiral Flute, R40 N............................................................................325 DIN Taps UNF, Spiral Flute, R45 VA DH..................................................................327 DIN Taps UNF, Spiral Flute, R50 Black Magic.............................................................326 DIN Taps UNF, Spiral, R50 VA PM.............................................................................328 DIN Taps UNJ, Spiral Flute, L12 Ti.............................................................................318 DIN Taps UNJ, Spiral Flute, R10 Ni............................................................................319 DIN Taps UNJ, Spiral Flute, R15 Ti............................................................................317 Endmills Carbide Finder

344

Endmills Carbide, 1 Flute, R30 Al, Short................................................................402 Endmills Carbide, 3 Flute, R30 N, DIN6527K.......................................................354 Endmills Carbide, 3 Flute, R30 N, DIN6527L.......................................................355 Endmills Carbide, 3 Flute, R30 N, Regular.............................................................356 Endmills Carbide, 3 Flute, R38/37/39 UNI, DIN 6527K, Harmony..........................390 Endmills Carbide, 3 Flute, R38/37/39 UNI, DIN6527L, Harmony............................391 Endmills Carbide, 3 Flute, R45/46/44 AI, DIN6527L, Harmony............................404 Endmills Carbide, 3 Flute, R45/46/44 AI, DIN6527L, Harmony............................407 Endmills Carbide, 3 Flute, R45/46/44 AI, Rad, DIN6527L, Harmony................408 Endmills Carbide, 3 Flute, R45/46/44 Al, Long Reach, Harmony.......................405 Endmills Carbide, 3 Flute, R45 W, DIN6527K......................................................357 Endmills Carbide, 3 Flute, R45 W, DIN6527L......................................................358 Endmills Carbide, 3 Flute, R55/54/56 VA, DIN6527L, Harmony...................410 Endmills Carbide, 4 Flute, R30 N, DIN6527K.......................................................359 Endmills Carbide, 4 Flute, R30 N, DIN6527L.......................................................361 Endmills Carbide, 4 Flute, R30 N, Regular.............................................................360 Endmills Carbide, 4 Flute, R35/38, Extra Long...................................................363 Endmills Carbide, 4 Flute, R35/38, Regular.........................................................362 Endmills Carbide, 4 Flute, R35/38 UNI, Cnr Rad, DIN6527L, Harmony............394 Endmills Carbide, 4 Flute, R35/38 UNI, Cnr Rad, DIN6527L, Harmony............395 Endmills Carbide, 4 Flute, R35/38 UNI, DIN6527K, Harmony........................392 Endmills Carbide, 4 Flute, R35/38 UNI, DIN6527L, Harmony...........................393 Endmills Carbide, 4 Flute, R40/42 VA, Cnr Rad, DIN6527L, Harmony...........412 Endmills Carbide, 4 Flute, R40/42 VA, DIN6527L, Harmony...........................411 Endmills Carbide, 4 Flute, R45/44 UNI, Cnr Rad, Long Reach, Harmony..........397 Endmills Carbide, 4 Flute, R45/44 UNI, DIN6527L, Harmony.........................396 Endmills Carbide, 4 Flute, R50 NH, Cnr Rad, DIN6527L, Harmony DUO......... 419 Endmills Carbide, 4 Flute, R50 NH, DIN6527L, Harmony DUO.......................418 Endmills Carbide, 4 Flute, R50 VH, Cnr Rad, DIN6527L, Harmony DUO........422 Endmills Carbide, 4 Flute, R50 VH, DIN6527L, Harmony DUO.........................421 Endmills Carbide, 5 Flute, R40/42 Ni, Cnr Rad, DIN6527L, Harmony................430 Endmills Carbide, 5 Flute, R40/42 Ni, DIN6527L, Harmony.......................................429 Endmills Carbide, 5 Flute, R40/42Ti, Cnr Rad, DIN6527L, Harmony..........424 Endmills Carbide, 5 Flute, R40/42Ti, DIN6527L, Harmony...........................................423 Endmills Carbide, 5 Flute, R40/42 Ti, Extra Long..............................................427 Endmills Carbide, 6-8 Flute, R45 NH, DIN6527L, Harmony.............................417 Endmills Carbide, 6-8 Flute, R50/35 NH, Cnr Rad, Long Reach, Harmony............416 Endmills Carbide, 6-8 Flute, R50/35 NH, DIN6527L, Harmony.....................414 Endmills Carbide, 6-8 Flute, R50/35 NH, Extra Long, Harmony.....................415 Endmills Carbide, 6 Flute, Corner Rad.....................................................................386 Endmills Carbide, 6 Flute, R40/42Ti, Cnr Rad, DIN6527L, Harmony..........426 Endmills Carbide, 6 Flute, R40/42Ti, DIN6527L, Harmony...........................................425 Endmills Carbide, 7 Flute, R40/42 Ni, Extra Long..............................................431 Endmills Carbide, 9 Flute, R40/42 Ni, Extra Long..............................................432 Endmills Carbide, Ballnose, 3 Flute, R45/46/44 AI, Long Reach, Harmony............406

Contents Endmills Carbide, Ballnose, 4 Flute, R30 N, Long Reach.................................372 Endmills Carbide, Ballnose, 4 Flute, R30 N, Regular.........................................371 Endmills Carbide, Ballnose, 4 Flute, R30 TiNiVA, Long Reach.......................433 Endmills Carbide, Ballnose, 4 Flute, R30 UNI, Long Reach.............................401 Endmills Carbide, Chamfer, 4 Flute 60°................................................................388 Endmills Carbide, Chamfer, 4 Flute 90°................................................................387 Endmills Carbide, Chamfer, 4 Flute, Corner Rad..................................................389 Endmills Carbide, Hi-Feed, 4 Flute, Corner Rad...................................................385 Endmills Carbide, Hi-Feed Micro, 4 Flute, Corner Rad......................................381 Endmills Carbide, Micro, 2 Flute, Corner Rad........................................................377 Endmills Carbide, Micro, 2 Flute, R40 NH Long Reach.....................................373 Endmills Carbide, Micro, Ballnose, 2 Flute, Long Reach.......................................379 Roughers Carbide, HR (fine), R20 WN, DIN6527L..................................................366 Roughers Carbide, HRS, R45 UNI, DIN6527L Harmony......................................399 Roughers Carbide, NR (normal), R25 Al, DIN 6527L.....................................................409 Roughers Carbide, NR (normal), R30 N, DIN6527L........................................................365 Roughers Carbide, R39/41 VA-R, DIN6527L, Harmony..........................................413 Roughers Carbide, STF, R45 UNI, DIN6527L, Harmony.......................................398 Slot Drills Carbide, 2 Flute, R30 N, DIN6527K.....................................................350 Slot Drills Carbide, 2 Flute, R30 N, DIN6527L.....................................................352 Slot Drills Carbide, 2 Flute, R30 N, Regular...........................................................351 Slot Drills Carbide, 2 Flute, R40 AlCarb, DIN6527L...........................................403 Slot Drills Carbide, Ballnose, 2 Flute, R30 N, DIN6527K.....................................367 Slot Drills Carbide, Ballnose, 2 Flute, R30 N, DIN6527L.................................369 Slot Drills Carbide, Ballnose, 2 Flute, R30 N, Long Reach................................370 Slot Drills Carbide, Ballnose, 2 Flute, R30 UNI, Long Reach............................400 Endmills HSS Finder

436

Endmills 3 Flute, R40 W, Long...................................................................................445 Endmills 4 Flute, R30 N, Regular..............................................................................440 Roughers HRS (fine), R45 UNI, Regular..................................................................444 Roughers NF (semi roughing), R30 N, Long..........................................................442 Roughers NF (semi roughing), R30 N, Regular...............................................................441 Roughers NR (normal), R30 NR, Long.....................................................................443 Roughers SPM, R30 VA-R, Long................................................................................447 Roughers SPM, R30 VA-R, Regular..........................................................................446 Slot Drills 2 Flute, R30 N, Long..................................................................................439 Slot Drills 2 Flute, R30 N, Stub..................................................................................438 Reamers Finder

451

Reamers Adjustable.......................................................................................................464 Reamers Adjustable.......................................................................................................465 Reamers Chucking...........................................................................................................459 Reamers Chucking...........................................................................................................460 Reamers Hand..................................................................................................................452 Reamers Machine............................................................................................................455 Reamers Morse Taper Socket.....................................................................................462 Reamers Taper Pin..........................................................................................................461 Reamers Taper Pipe........................................................................................................463 Literature

469

Application Guide Material Workpiece...................................................................472 Cutting Lubricants Venom...........................................................................................470 Literature Black Books..................................................................................................469

Product Index Countersinks Catalogue Code C100 C107 C108

Page No.

Discount Group

Description

147 146 146

B0709 A1106 A1108

Counterbore Countersink, Three Flute, N Countersink, Three Flute, UNI

Catalogue Code

Page No.

Discount Group

Description

D100 D101 D101 D102 D102 D103 D103 D109 D109 D113 D115 D118 D120 D121 D122 D123 D124 D125 D126 D130 D135 D136 D140 D141 D142 D151 D153 D155 D163 D165 D168 D169 D171 D175 D176 D177 D179 D179 D180 D180 D182 D186 D188 D194 D195 D196 D300 D304

109 75 76 75 76 75 76 75 87 122 132 139 140 142 143 142 142 143 142 143 144 144 138 136 139 110 118 115 90 93 95 104 127 145 145 113 75 76 75 101 99 107 140 129 130 131 38 39

A1002

Drill, Stub, Blu

A1202

Drill, Jobber, Set

A0402

Drill, Jobber

A1202

Drills

Tool Material

Surface Finish

Standard

HSS Co HSS Co HSS Co

Brt Brt TiAlN

DIN373 DIN335 DIN335

Tool Material

Surface Finish

Standard

118° Form C

HSS

Blu

ANSI B94-11

118° Standard

HSS

Brt

DIN338

118° Standard

HSS

Brt

DIN338

Drill, Jobber, Set

118° Standard

HSS

Blu

DIN338

A0402

Drill, Jobber

118° Standard

HSS

Blu

DIN338

A1216

Drill, Jobber, Set

118° Form A

HSS

TiN

DIN338

A0420

Drill, Jobber

118° Form A

HSS

TiN

DIN338

A0404

Drill, Jobber, Heavy Duty, Set

135° Form C

HSS Co

Colour Temp

DIN338

A0404

Drill, Jobber, Heavy Duty

135° Form C

HSS Co

Colour Temp

DIN338

A0502

Drill, Long Series

118° Standard

HSS

Blu

ANSI B94-11

A0702

Drill, Morse Taper Shank

118° Form A

HSS

Blu

DIN345

A0702

Morse Taper Sleeve

Alloy Steel

Brt

A0906

Drill, Reduced Shank, 10mm or 3/8"

118° Standard

HSS

Blu

A0802

Drill, Panel, Single Ended

135° Standard

HSS

Brt

A0802

Drill, Panel, Double Ended

135° Standard

HSS

Brt

A1002

Drill, Panel, Stub

118° Standard

HSS

Brt

A0802

Drill, Panel, Single Ended

135° Standard

HSS

Blu

A0802

Drill, Panel, Double Ended

135° Standard

HSS

Blu

A1002

Drill, Stub, Blu

118° Form C

HSS

Blu

ANSI B94-11

A0802

Drill, Panel, Double Ended

135° Standard

HSS Co

Colour Temp

A0302

Drill, Centre, A-Type

60° Stepped

HSS

Brt

DIN333

A0302

Drill, Centre, Plain Type

60° Stepped

HSS

Brt

ANSI B94-11

A0704

Drill, Morse Taper Shank, Long Series

118° Standard

HSS

Blu

DIN 341

A0702

Drill, Morse Taper Shank, Heavy Duty

118° Form A

HSS Co

Colour Temp

DIN345

A0702

Drill, Morse Drill, Drift Key

A1006

Drill, Stub, CNC

130° Form B

HSS Co

TiAlN

DIN1897

A1502

Drill, Stub, R40 VA, Black Magic

4 Facet

HSS Co

TiAlN

~DIN1897

A1502

Drill, Stub, R40 UNI

130° 4 Facet Form B

SPM

TiAlN

~DIN1897

A0418

Drill, Jobber, DHJ

130° Form B

HSS Co

TiAlN

DIN338

A0418

Drill, Jobber, DXJ

130° Form A

HSS Co

TiAlN

DIN338

A1502

Drill, Jobber, R40 UNI

130° 4 Facet Form B

SPM

TiAlN

~DIN338

A1502

Drill, Jobber, R40 VA, Black Magic

4 Facet Form C

HSS Co

TiAlN

~DIN338

A0508

Drill, Long Series, DHL

130° Form B

HSS Co

TiAlN

DIN340

A1124

Drill, NC Spotting

90°

HSS Co

TiN

DIN1897

A1124

Drill, NC Spotting

120°

HSS Co

TiN

DIN1897

A1006

Drill, Stub, DXS

130° Form A

HSS Co

TiAlN

DIN1897

A1202

Drill, Jobber, Viper Plus, Set

118° Form C

HSS

TiAlN Tip

DIN338

A0402

Drill, Jobber, Viper Plus

118° Form C

HSS

TiAlN Tip

DIN338

A1202

Drill, Jobber, R40 InOx, Set

130° Standard

HSS

TiAlN Tip

~DIN338

A0402

Drill, Jobber, R40 InOx

~DIN338

A1502

Drill, Jobber, R40 UNI, IK, HE Shank

A1002

Point Type 90° 90°

Point Type

130°

HSS

TiAlN Tip

130° 4 Facet Form B

HSS Co

TiAlN

Drill, Stub, Blu

118° Form C

HSS

Blu

DIN1897

A0906

Drill, Reduced Shank

118° Standard

HSS

Blu

A0508

Drill, Extra Long, DHXL-1

130° Form B

HSS Co

TiAlN

DIN1869-1

A0508

Drill, Extra Long, DHXL-2

130° Form B

HSS Co

TiAlN

DIN1869-2

A0508

Drill, Extra Long, DHXL-3

130° Form B

HSS Co

TiAlN

DIN1869-3

A0202

Drill, 3xD, Straight Flute, GG

140° Type C (Facet)

VHM

Brt

A0202

Drill, 3xD, R15 NH

135° 4 Facet Form C

VHM

Brt

Product Index Drills

Catalogue Code

Page No.

D306 D310 D318 D319 D323 D324 D325 D326 D327 D328 D329 D330 D331 D332 D333 D334 D335 D336 D337 D355 D356 D357 D358 D359 D364 D365 D366 D368 D371 D372 D373 D375

38 39 67 67 22 22 22 43 43 43 28 28 28 48 48 48 52 52 52 68 33 33 57 57 68 68 68 41 62 66 66 66

Catalogue Code

Page No.

E123* E124* E146 E147 E148* E149* E151 E179 E180 E181 E182 E183 E184 E185 E186 E191 E192 E193

445 445 443 443 443 443 444 438 438 438 438 439 439 439 439 440 440 440

Endmills

Discount Group

Description

Point Type

Tool Material

Surface Finish

Standard

A0206 A0206

Drill, 3xD, Straight Flute, GG

140° Type C (Facet)

VHM

TiCN

Drill, 3xD, R15 NH

135° 4 Facet Form C

VHM

TiCN

A0202

Drill, Centre

60° Stepped

VHM

Brt

ANSI B94-11

A0206 A0210

Drill, Centre

60° Stepped

VHM

TiCN

ANSI B94-11

Drill, 3xD, R30 N, Shank Form HA

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 3xD, R30 N, Shank Form HB

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 3xD, R30 N, Shank Form HE

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 5xD, R30 N, Shank Form HA

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 5xD, R30 N, Shank Form HB

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 5xD, R30 N, Shank Form HE

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 3xD, R30 N, IK, Shank Form HA

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 3xD, R30 N, IK, Shank Form HB

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 3xD, R30 N, IK, Shank Form HE

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 5xD, R30 N, IK, Shank Form HA

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 5xD, R30 N, IK, Shank Form HB

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 5xD, R30 N, IK, Shank Form HE

140° Form C

VHM

AlCrN

DIN6537

A0210

Drill, 8xD, R30 N, IK, Shank Form HA

140° Form C

VHM

AlCrN

A0210

Drill, 8xD, R30 N, IK, Shank Form HB

140° Form C

VHM

AlCrN

A0210

Drill, 8xD, R30 N, IK, Shank Form HE

140° Form C

VHM

AlCrN

A0208

Drill, NC Spotting

90° Form A

VHM

Brt

A0210

Drill, 3xD, R30 VA Black Magic, HA Shank

140° 4 Facet Form C

VHM

HELICA

DIN6537

A0210

Drill, 3xD, R30 VA Black Magic, HE Shank

140° 4 Facet Form C

VHM

HELICA

DIN6537

A0210

Drill, 5xD, R30 VA Black Magic, HA Shank

140° 4 Facet Form C

VHM

HELICA

DIN6537

A0210

Drill, 5xD, R30 VA Black Magic, HE Shank

140° 4 Facet Form C

VHM

HELICA

DIN6537

A0210

Drill, NC Spotting

90° Form A

VHM

AlCrN

A0208

Drill, NC Spotting

142° Form A

VHM

Brt

A0210

Drill, NC Spotting

142° Form A

VHM

AlCrN

A0208

Drill, 5xD, R25 N

118° Form C

VHM

Brt

DIN338

A0210

Drill, 12xD, R30 N, IK , Shank Form HA

135° Form C

VHM

Pertura Tip

A0210

Drill, Carbide, Extra Long, 15xD

135° Form C

VHM

Pertura Tip

A0210

Drill, Carbide, Extra Long, 20xD

135° Form C

VHM

Pertura Tip

A0210

Drill, Carbide, Extra Long, 30xD

135° Form C

VHM

Pertura Tip

Discount Group

Description

Shank

Tool Material

Surface Finish

Standard

B0610

Endmill, 3 Flute, R40 W, Long

DIN 1835-A

SPM

Brt

DIN844L

B0612

Endmill, 3 Flute, R40 W, Long

DIN 1835-A

SPM

TiAlN

DIN844L

B0402

Rougher, NR (normal), R30 NR, Long

Din 1835-A

HSS Co.8

Brt

DIN844L

B0404

Rougher, NR (normal), R30 NR, Long

Din 1835-A

HSS Co.8

TiCN

DIN844L

B0402

Rougher, NR (normal), R30 NR, Long

DIN 1835-B

HSS Co.8

Brt

DIN844L

B0404

Rougher, NR (normal), R30 NR, Long

DIN 1835-B

HSS Co.8

TiCN

DIN844L

B0408

Rougher, HRS (fine), R45 UNI, Regular

DIN 1835-B

SPM

TiAlN

DIN844K

B0606

Slot Drill, 2 Flute, R30 N, Stub

DIN 1835-A

HSS Co.8

Brt

DIN327

B0608

Slot Drill, 2 Flute, R30 N, Stub

DIN 1835-A

HSS Co.8

TiAlN

DIN327

B0606

Slot Drill, 2 Flute, R30 N, Stub

DIN 1835-B

HSS Co.8

Brt

DIN327

B0608

Slot Drill, 2 Flute, R30 N, Stub

DIN 1835-B

HSS Co.8

TiAlN

DIN327

B0606

Slot Drill, 2 Flute, R30 N, Long

DIN 1835-A

HSS Co.8

Brt

DIN844L

B0608

Slot Drill, 2 Flute, R30 N, Long

DIN 1835-A

HSS Co.8

TiAlN

DIN844L

B0606

Slot Drill, 2 Flute, R30 N, Long

DIN 1835-B

HSS Co.8

Brt

DIN844L

B0608

Slot Drill, 2 Flute, R30 N, Long

DIN 1835-B

HSS Co.8

TiAlN

DIN844L

B0606

Endmill, 4 Flute, R30 N, Regular

DIN 1835-A

HSS Co.8

Brt

DIN844K

B0608

Endmill, 4 Flute, R30 N, Regular

DIN 1835-A

HSS Co.8

TiAlN

DIN844K

B0606

Endmill, 4 Flute, R30 N, Regular

DIN 1835-B

HSS Co.8

Brt

DIN844K

*Not available once current stock is depleted

Product Index Endmills

Catalogue Code

Page No.

E194 E201 E202 E205 E206 E251 E252 E255 E310 E400 E401 E402 E403 E408 E409 E410 E411 E422 E423 E424 E425 E426 E427 E430 E431 E432 E433 E434 E435 E436 E437 E440 E441 E442 E443 E444 E446 E447 E450 E451 E452 E453 E454 E455 E456 E457 E458 E459 E460 E462 E463 E464 E465

440 441 441 442 442 446 447 446 403 404 404 405 405 406 406 410 410 390 390 391 391 396 396 397 397 414 414 415 415 416 416 400 400 401 401 402 409 409 366 366 367 367 367 367 387 388 389 411 411 412 412 423 423

Discount Group

Description

Shank

Tool Material

Surface Finish

Standard

B0608 B0402

Endmill, 4 Flute, R30 N, Regular

DIN 1835-B

HSS Co.8

TiAlN

DIN844K

Rougher, NF (semi), R30, N, Regular

DIN 1835-B

HSS Co.8

Brt

DIN844K

B0404

Rougher, NF (semi), R30, N, Regular

DIN 1835-B

HSS Co.8

TiAlN

DIN844K

B0402

Rougher, NF (semi), R30, N, Long

DIN 1835-B

HSS Co.8

Brt

DIN844L

B0404

Rougher, NF (semi), R30, N, Long

DIN 1835-B

HSS Co.8

TiAlN

DIN844L

B0408

Rougher, SPM, R30 VA-R

DIN 1835-B

SPM

AlCrN

DIN844K

B0408

Rougher, SPM, R30 VA-R, Long

DIN 1835-B

SPM

AlCrN

DIN844L

B0408

Rougher, SPM, R30 VA-R

DIN 1835-B

SPM

AlCrN

DIN844K

B0208

Slot Drill, 2 Flute, R40, AlCarb, Long

DIN 6535-HA

VHM

Brt

DIN6527L

B0210

Endmill, 3 Flute, R45/46/44-Al, Long, Harmony

DIN 6535-HA

VHM-ULTRA

CrN

DIN6527L

B0210

Endmill, 3 Flute, R45/46/44-Al, Long, Harmony

DIN 6535-HB

VHM-ULTRA

CrN

DIN6527L

B0210

Endmill, 3 Flute, R45/46/44-Al, Long Reach, Harmony

DIN 6535-HA

VHM-ULTRA

CrN

B0210

Endmill, 3 Flute, R45/46/44-Al, Long Reach, Harmony

DIN 6535-HB

VHM-ULTRA

CrN

B0210

Endmill, Ballnose, 3 Flute, R45/46/44-Al, Long Reach, Harmony

DIN 6535-HA

VHM-ULTRA

CrN

B0210

Endmill, Ballnose, 3 Flute, R45/46/44-Al, Long Reach, Harmony

DIN 6535-HB

VHM-ULTRA

CrN

B0210

Endmill, 3 Flute, R55/54/56-VA, Long, Harmony

DIN 6535-HA

VHM-ULTRA

Helica

DIN6527L

B0210

Endmill, 3 Flute, R55/54/56-VA, Long, Harmony

DIN 6535-HB

VHM-ULTRA

Helica

DIN6527L

B0210

Endmill, 3 Flute, R38/37/39 UNI, Short, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527K

B0210

Endmill, 3 Flute, R38/37/39 UNI, Short, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527K

B0210

Endmill, 3 Flute, R38/37/39 UNI, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 3 Flute, R38/37/39 UNI, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R45/44 UNI, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R45/44 UNI, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R45/44 UNI, Long Reach, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

B0210

Endmill, 4 Flute, R45/44 UNI, Long Reach, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

B0210

Endmill, 6-8 Flute, R50/35-NH, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 6-8 Flute, R50/35-NH, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 6-8 Flute, R50/35-NH, Extra Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

B0210

Endmill, 6-8 Flute, R50/35-NH, Extra Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

B0210

Endmill, 6-8 Flute, R50/35-NH, Long Reach, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

B0210

Endmill, 6-8 Flute, R50/35-NH, Long Reach, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

B0210

Slot Drill, Ballnose, 2 Flute, R30 UNI, Long Reach

DIN 6535-HA

VHM-ULTRA

AlCrN

B0210

Slot Drill, Ballnose, 2 Flute, R30 UNI, Long Reach

DIN 6535-HB

VHM-ULTRA

AlCrN

B0210

Endmill, Ballnose, 4 Flute, R30 UNI, Long Reach

DIN 6535-HA

VHM-ULTRA

AlCrN

B0210

Endmill, Ballnose, 4 Flute, R30 UNI, Long Reach

DIN 6535-HB

VHM-ULTRA

AlCrN

B0208

Endmill, 1 Flute, R30 Al, Short

DIN 6535-HA

VHM

Brt

B0208

Rougher, NR (normal), R25 Al

DIN 6535-HA

VHM

Brt

DIN6527L

B0208

Rougher, NR (normal), R25 Al

DIN 6535-HB

VHM

Brt

DIN6527L

B0210

Rougher, HR (fine), R20 WN, Long

DIN 6535-HA

VHM

TiAlN

DIN6527L

B0210

Rougher, HR (fine), R20 WN, Long

DIN 6535-HB

VHM

TiAlN

DIN6527L

B0208

Slot Drill, Ballnose, 2 Flute, R30, Short

DIN 6535-HA

VHM

Brt

DIN6527K

B0208

Slot Drill, Ballnose, 2 Flute, R30, Short

DIN 6535-HB

VHM

Brt

DIN6527K

B0210

Slot Drill, Ballnose, 2 Flute, R30, Short

DIN 6535-HA

VHM

TiAlN

DIN6527K

B0210

Slot Drill, Ballnose, 2 Flute, R30, Short

DIN 6535-HB

VHM

TiAlN

DIN6527K

B0210

Endmill, Chamfer, 4 Flute, 90°

DIN 6535-HA

VHM

TiAlN

B0210

Endmill, Chamfer, 4 Flute, 60°

DIN 6535-HA

VHM

TiAlN

B0210

Endmill, Chamfer, 4 Flute, Corner Rad

DIN 6535-HA

VHM

TiAlN

B0210

Endmill, 4 Flute, R40/42-VA, Long, Harmony

DIN 6535-HA

VHM-ULTRA

Helica

DIN6527L

B0210

Endmill, 4 Flute, R40/42-VA, Long, Harmony

DIN 6535-HB

VHM-ULTRA

Helica

DIN6527L

B0210

Endmill, 4 Flute, R40/42-VA, Cnr Rad, Long, Harmony

DIN 6535-HA

VHM-ULTRA

Helica

DIN6527L

B0210

Endmill, 4 Flute, R40/42-VA, Cnr Rad, Long, Harmony

DIN 6535-HB

VHM-ULTRA

Helica

DIN6527L

B0210

Endmill, 5 Flute, R40/42-Ti, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlNova

DIN6527L

B0210

Endmill, 5 Flute, R40/42-Ti, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlNova

DIN6527L

Product Index Endmills

Catalogue Code

Page No.

E466 E467 E468 E469 E470 E471 E472 E473 E474 E475 E476 E477 E478 E480 E481 E486 E487 E488 E502 E503 E507 E511 E512 E515 E516 E519 E520 E523 E524 E527 E528 E532 E533 E534 E535 E536 E543 E544 E545 E546* E547 E548 E549 E550 E551 E553 E554 E555 E556 E557 E558 E559 E560

424 424 425 425 426 426 429 429 430 430 427 428 408 407 433 431 432 413 350 350 352 354 354 355 355 357 357 358 358 359 359 361 392 392 393 393 417 417 398 398 365 365 399 399 369 369 369 370 370 372 372 394 394

Discount Group

Description

Shank

Tool Material

Surface Finish

Standard

B0210 B0210

Endmill, 5 Flute, R40/42-Ti, Cnr Rad, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlNova

DIN6527L

Endmill, 5 Flute, R40/42-Ti, Cnr Rad, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlNova

DIN6527L

B0210

Endmill, 6 Flute, R40/42Ti, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlNova

DIN6527L

B0210

Endmill, 6 Flute, R40/42Ti, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlNova

DIN6527L

B0210

Endmill, 6 Flute, R40/42Ti, Cnr Rad, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlNova

DIN6527L

B0210

Endmill, 6 Flute, R40/42Ti, Cnr Rad, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlNova

DIN6527L

B0210

Endmill, 5 Flute, R40/42 Ni, Long, Harmony

DIN 6535-HA

VHM-ULTRA

Xceed

DIN6527L

B0210

Endmill, 5 Flute, R40/42 Ni, Long, Harmony

DIN 6535-HB

VHM-ULTRA

Xceed

DIN6527L

B0210

Endmill, 5 Flute, R40/42 Ni, Cnr Rad, Long, Harmony

DIN 6535-HA

VHM-ULTRA

Xceed

DIN6527L

B0210

Endmill, 5 Flute, R40/42 Ni, Cnr Rad, Long, Harmony

DIN 6535-HB

VHM-ULTRA

Xceed

DIN6527L

B0210

Endmill, 5 Flute, R40/42 Ti, Extra Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlNova

B0210

Endmill, 5 Flute, R40/42 Ti, Extra Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlNova

B0210

Endmill, Flute, R45/46/44 AI, Rad, Long, Harmony

DIN 6535-HA

VHM-ULTRA

Brt

DIN6527L

B0210

Endmill, 3 Flute, R45/46/44 AI, Long, Harmony

DIN 6535-HA

VHM-ULTRA

Brt

DIN6527L

B0210

Endmill, Ballnose, 4 Flute, R30 TiNi VA, Long Reach, Harmony

DIN 6535-HA

VHM-ULTRA

Xceed

B0210

Endmill, 5 Flute, R40/42 Ni, Extra Long, Harmony

DIN 6535-HA

VHM-ULTRA

Xceed

B0210

Endmill, 5 Flute, R40/42 Ni, Extra Long, Harmony

DIN 6535-HA

VHM-ULTRA

Xceed

B0210

Rougher, Carbide, R39/41 VA-R, DIN6527L Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Slot Drill, 2 Flute, R30 N, Short

DIN 6535-HA

VHM

TiAlN

DIN6527K

B0210

Slot Drill, 2 Flute, R30 N, Short

DIN 6535-HB

VHM

TiAlN

DIN6527K

B0210

Slot Drill, 2 Flute, R30 N, Long

DIN 6535-HB

VHM

TiAlN

DIN6527L

B0210

Endmill, 3 Flute, R30 N, Short

DIN 6535-HA

VHM

TiAlN

DIN6527K

B0210

Endmill, 3 Flute, R30 N, Short

DIN 6535-HB

VHM

TiAlN

DIN6527K

B0210

Endmill, 3 Flute, R30 N, Long

DIN 6535-HA

VHM

TiAlN

DIN6527L

B0210

Endmill, 3 Flute, R30 N, Long

DIN 6535-HB

VHM

TiAlN

DIN6527L

B0210

Endmill, 3 Flute, R45 NH, Short

DIN 6535-HA

VHM

TiAlN

DIN6527K

B0210

Endmill, 3 Flute, R45 NH, Short

DIN 6535-HB

VHM

TiAlN

DIN6527K

B0210

Endmill, 3 Flute, R45 Al, Long

DIN 6535-HA

VHM

TiAlN

DIN6527L

B0210

Endmill, 3 Flute, R45 Al, Long

DIN 6535-HB

VHM

TiAlN

DIN6527L

B0210

Endmill, 4 Flute, R30 N, Short

DIN 6535-HA

VHM

TiAlN

DIN6527K

B0210

Endmill, 4 Flute, R30 N, Short

DIN 6535-HB

VHM

TiAlN

DIN6527K

B0210

Endmill, 4 Flute, R30 N, Long

DIN 6535-HB

VHM

TiAlN

DIN6527L

B0210

Endmill, 4 Flute, R35/38 UNI, Short, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527K

B0210

Endmill, 4 Flute, R35/38 UNI, Short, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527K

B0210

Endmill, 4 Flute, R35/38 UNI, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R35/38 UNI, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 6-8 Flute, R45 VH, Long Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 6-8 Flute, R45 VH, Long Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Rougher, STF, 4 Flute, R45 UNI, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Rougher, STF, 4 Flute, R45 UNI, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Rougher, NR (normal), R30 N, Long

DIN 6535-HA

VHM

TiAlN

DIN6527L

B0210

Rougher, NR (normal), R30 N, Long

DIN 6535-HB

VHM

TiAlN

DIN6527L

B0210

Rougher, HRS (fine), R45 UNI, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Rougher, HRS (fine), R45 UNI, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0208

Slot Drill, Ballnose, 2 Flute, R30 N, Long

DIN 6535-HA

VHM

Brt

DIN6527L

B0210

Slot Drill, Ballnose, 2 Flute, R30 N, Long

DIN 6535-HA

VHM

TiAlN

DIN6527L

B0210

Slot Drill, Ballnose, 2 Flute, R30 N, Long

DIN 6535-HB

VHM

TiAlN

DIN6527L

B0210

Slot Drill, Ballnose, 2 Flute, R30 N, Long Reach

DIN 6535-HA

VHM-ULTRA

AlCrN

B0210

Slot Drill, Ballnose, 2 Flute, R30 N, Long Reach

DIN 6535-HB

VHM-ULTRA

AlCrN

B0210

Endmill, Ballnose, 4 Flute, R30 N, Long Reach

DIN 6535-HA

VHM-ULTRA

AlCrN

B0210

Endmill, Ballnose, 4 Flute, R30 N, Long Reach

DIN 6535-HB

VHM-ULTRA

AlCrN

B0210

Endmill, 4 Flute, R35/38 UNI Corner Rad, Long, Harmony

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R35/38 UNI Corner Rad, Long, Harmony

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

*Not available once current stock is depleted

Product Index Endmills

Catalogue Code

Page No.

E562 E563 E564 E565 E566 E567 E568 E569 E580 E581 E582 E598 E600 E601 E602 E603 E604 E605 E606 E607 E608 E609 E610 E611 E635 E636 E637 E638 E650

418 418 419 419 421 421 422 422 373 377 379 381 351 360 368 351 360 368 371 371 353 364 356 356 362 362 363 363 385

Shank

Tool Material

Surface Finish

Standard

Endmill, 4 Flute, R50-NH, Long, Harmony DUO

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

Endmill, 4 Flute, R50-NH, Long, Harmony DUO

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R50-NH, Cnr Rad, Long, Harmony DUO

DIN 6535-HA

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R50-NH, Cnr Rad, Long, Harmony DUO

DIN 6535-HB

VHM-ULTRA

AlCrN

DIN6527L

B0210

Endmill, 4 Flute, R50-VH, Long, Harmony DUO

DIN 6535-HA

VHM-ULTRA

Aldura

DIN6527L

B0210

Endmill, 4 Flute, R50-VH, Long, Harmony DUO

DIN 6535-HB

VHM-ULTRA

Aldura

DIN6527L

B0210

Endmill, 4 Flute, R50-VH, Cnr Rad, Long, Harmony DUO

DIN 6535-HA

VHM-ULTRA

Aldura

DIN6527L

B0210

Endmill, 4 Flute, R50-VH, Cnr Rad, Long, Harmony DUO

DIN 6535-HB

VHM-ULTRA

Aldura

DIN6527L

B0210

Endmill, Micro, 2 Flute, Long Reach

DIN 6535-HA

VHM

TiSiN

B0218

Endmill, Micro, 2 Flute, Long Reach, Corner Rad

DIN 6535-HA

VHM

TiSiN

B0218

Endmill, Micro, Ballnose, 2 Flute, Long Reach

DIN 6535-HA

VHM

TiSiN

B0218

Endmills, Hi-Feed Micro, 4 Flute, Corner Rad

DIN 6535-HA

VHM

TiSiN

B0212

Slot Drill, 2 Flute, R30 N, Regular

DIN 6535-HA

VHM

Brt

B0212

Endmill, 4 Flute, R30 N, Regular

DIN 6535-HA

VHM

Brt

B0212

Slot Drill, Ballnose, 2 Flute, R30 N, Regular

DIN 6535-HA

VHM

Brt

B0214

Slot Drill, 2 Flute, R30 N, Regular

DIN 6535-HA

VHM

TiAlN

B0214

Endmill, 4 Flute, R30 N, Regular

DIN 6535-HA

VHM

TiAlN

B0214

Slot Drill, Ballnose, 2 Flute, R30 N, Regular

DIN 6535-HA

VHM

TiAlN

B0208

Endmill, Ballnose, 4 Flute, R30 N, Regular

DIN 6535-HA

VHM

Brt

B0214

Endmill, Ballnose, 4 Flute, R30 N, Regular

DIN 6535-HA

VHM

TiAlN

B0212

Endmill, 2 Flute, R30 N, Extra Long

DIN 6535-HA

VHM

Brt

B0212

Endmill, 4 Flute, R30 N, Extra Long

DIN 6535-HA

VHM

Brt

B0212

Endmill, 3 Flute, R30 N, Regular

DIN 6535-HA

VHM

Brt

B0214

Endmill, 3 Flute, R30 N, Regular

DIN 6535-HA

VHM

TiAlN

B0214

Endmill, 4 Flute, R35/38, Regular

DIN 6535-HA

VHM-ULTRA

TiAlN

DIN6527L

B0214

Endmill, 4 Flute, R35/38, Regular

DIN 6535-HB

VHM-ULTRA

TiAlN

DIN6527L

B0214

Endmill, Carbide, 4 Flute, R35/38, Extra Long

DIN 6535-HA

VHM-ULTRA

TiAlN

B0214

Endmill, Carbide, 4 Flute, R35/38, Extra Long

DIN 6535-HB

VHM-ULTRA

TiAlN

B0218

Endmill, Hi-Feed, 4 Flute, Corner Rad

DIN 6535-HA

VHM

TiSiN

Catalogue Code L100 L200

Page No.

Discount Group

Description

469 469

Z0502 Z0502

Engineers Black Book Fasteners Black Book

Catalogue Code M800

Page No.

Discount Group

Description

Z1006

Cutting Lubricants – Venom

Catalogue Code R100 R101 R102 R105 R106 R107 R108 R109 R110 R111 R112

Page No.

Discount Group

Description

Geometry

Tool Material

Surface Finish

Standard

452 455 459 461 462 462 463 464 464 464 464

B0302 B0302 B0302 B0302 B0302 B0302 B0302 B0304 B0304 B0304 B0304

Reamer, Hand Reamer, Machine Reamer, Chucking Reamer, Taper Pin Reamer, Morse Taper Socket, Roughing Reamer, Morse Taper Socket, Finishing Reamer, Taper Pipe Reamer, Adjustable Reamer, Adjustable, Blade Sets Reamer, Adjustable, Pilots Reamer, Adjustable, Nuts

10° Left Helix 10° Left Helix 10° Left Helix 7° Left Helix 7° Left Helix 7° Left Helix 15° Left Helix Straight -

HSS HSS HSS Co HSS HSS HSS HSS TCA TCA TCA TCA

Brt Brt Brt Brt Brt Brt Brt Brt Brt Brt Brt

DIN206 / ISO 236 DIN208 DIN212 / ISO 521 -

Literature

Misc

Reamers

471

Discount Group

Description

B0210 B0210

Product Index Taps

Catalogue Code T100 T101 T102 T103 T104 T105 T106 T107 T110 T111 T112 T113 T114 T115 T116 T117 T118 T119 T120 T121 T122 T123 T124 T125 T126 T127 T128 T129 T130 T131 T134 T135 T140 T141 T142 T143 T144 T145 T146 T147 T148 T149 T152 T153 T154 T155 T156 T157 T158 T159 T160 T161 T163 T164 T165 T166 T167 T168 T169 T170

Page No.

Discount Group

Description

221 222 221 222 221 222 223 224 231 232 231 232 233 234 233 234 233 234 235 236 228 229 228 229 228 229 230 230 230 230 237 238 237 238 237 238 239 240 239 240 239 240 263 263 278 278 278 278 281 282 282 281 283 297 297 297 297 301 301 299

D0402 D0402 D0402 D0402 D0406 D0406 D0402 D0402 D0402 D0402 D0408 D0408 D0402 D0402 D0408 D0408 D0408 D0408 D0408 D0408 D0402 D0402 D0402 D0402 D0404 D0404 D0402 D0402 D0406 D0406 D0402 D0402 D0410 D0410 D0410 D0410 D0402 D0402 D0408 D0408 D0408 D0408 D0408 D0408 D0402 D0402 D0402 D0406 D0402 D0402 D0408 D0408 D0410 D0402 D0402 D0402 D0406 D0402 D0410 D0402

Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, VA Tap, Gun, VA Tap, Gun, VA Tap, Gun, VA Tap, Gun, VA PM Tap, Gun, VA PM Tap, Gun, VA PM Tap, Gun, VA PM Tap, Gun, VA PM, IK Tap, Gun, VA PM, IK Tap, Gun, VA DH Tap, Gun, VA DH Tap, Gun, W Tap, Gun, W Tap, Gun, W Tap, Gun, W Tap, Gun, Cu Tap, Gun, Cu Tap, Gun, W-AZ Tap, Gun, W-AZ Tap, Gun, W-AZ Tap, Gun, W-AZ Tap, Gun, NH Tap, Gun, NH Tap, Gun, NH Tap, Gun, NH Tap, Gun, NH, IK Tap, Gun, NH, IK Tap, Gun, H Tap, Gun, H Tap, Gun, H Tap, Gun, H Tap, Gun, H, IK Tap, Gun, H, IK Tap, Spiral Flute, L12, Ti Tap, Spiral Flute, L12, Ti Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, VA Tap, Gun, VA PM Tap, Gun, VA PM Tap, Gun, VA Tap, Gun, NH Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, NH Tap, Gun, NH Tap, Gun, VA

Thread

Geometry Type

Tool Material

Surface Finish

Standard

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M MF MF MF MF MF MF MF MF MF UNC UNC UNC UNC UNC UNC UNC

N N N N N N N N VA VA VA VA VA PM VA PM VA PM VA PM VA PM - IK VA PM - IK VA DH VA DH W W W W Cu Cu W - AZ W - AZ W - AZ W - AZ NH NH NH NH NH - IK NH - IK H H H H H - IK H - IK Ti Ti N N N N VA VA PM VA PM VA NH N N N N NH NH VA

HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co HSSE HSSE HSSE HSSE HSSE PM-HSSE V3 PM-HSSE V3 HSSE PM-HSSE V3 HSSE HSSE HSSE HSSE PM-HSSE V3 PM-HSSE V3 HSSE

Brt Brt Blu Blu TiN TiN Brt Brt Blu Blu TiCN TiCN Blu Blu TiCN TiCN TiCN TiCN TiCN TiCN Ni Ni Blu Blu CrN CrN Brt Brt TiN TiN Blu Blu TiAlN TiAlN TiAlN TiAlN Blu Blu TiCN TiCN TiCN TiCN TiCN TiCN Brt Brt Blu TiN Blu Blu TiCN TiCN TiAlN Brt Brt Blu TiN Blu TiAlN Blu

DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1

Product Index Taps

Catalogue Code T171 T172 T173 T174 T175 T176 T177 T178 T179* T180 T181 T182 T183 T184 T187 T188 T189 T190 T191 T192 T193 T194 T195 T196 T197 T198 T199 T200 T201 T202 T205 T206 T207 T208 T209 T210 T211 T212 T213 T214 T215 T216 T217 T218 T221 T222 T227 T228 T229 T230 T231 T232* T233 T234 T235 T236 T237 T238 T239 T240

Page No.

Discount Group

Description

Thread

Geometry Type

Tool Material

Surface Finish

Standard

299 303 320 320 320 322 322 331 331 331 333 333 241 242 243 244 243 244 245 246 245 246 245 246 253 253 254 254 253 254 255 256 257 258 261 261 261 261 261 261 262 262 264 264 259 260 259 260 259 260 250 251 250 251 252 252 252 252 252 252

D0408 D0402 D0402 D0402 D0406 D0402 D0408 D0402 D0402 D0406 D0402 D0408 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0402 D0408 D0408 D0408 D0408 D0408 D0408 D0402 D0402 D0408 D0408 D0408 D0408 D0408 D0408 D0402 D0402 D0402 D0402 D0410 D0410 D0410 D0410 D0402 D0402 D0404 D0404 D0402 D0402 D0402 D0402 D0404 D0404

Tap, Gun, VA Tap, Gun, H Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, VA Tap, Gun, VA Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Gun, VA Tap, Gun, VA Tap, Spiral Flute, R15 N Tap, Spiral Flute, R15 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, L40 N Tap, Spiral Flute, L40 N Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R50 VA PM Tap, Spiral Flute, R50 VA PM Tap, Spiral Flute, R50 VA PM, IK Tap, Spiral Flute, R50 VA PM, IK Tap, Spiral Flute, R15 H Tap, Spiral Flute, R15 H Tap, Spiral Flute, R15 H Tap, Spiral Flute, R15 H Tap, Spiral Flute, R15 H, IK Tap, Spiral Flute, R15 H, IK Tap, Spiral Flute, R15 Ti Tap, Spiral Flute, R15 Ti Tap, Spiral Flute, R10 Ni Tap, Spiral Flute, R10 Ni Tap, Spiral Flute, R40 NH Tap, Spiral Flute, R40 NH Tap, Spiral Flute, R40 NH Tap, Spiral Flute, R40 NH Tap, Spiral Flute, R40 NH, IK Tap, Spiral Flute, R40 NH, IK Tap, Metric, Spiral Flute, R45 Al Tap, Metric, Spiral Flute, R45 Al Tap, Spiral Flute, R45 Al Tap, Spiral Flute, R45 Al Tap, Spiral Flute, R45 W Tap, Spiral Flute, R45 W Tap, Spiral Flute, R45 W Tap, Spiral Flute, R45 W Tap, Spiral Flute, R45 Cu Tap, Spiral Flute, R45 Cu

UNC UNC UNF UNF UNF UNF UNF G (BSPF) G (BSPF) G (BSPF) G (BSPF) G (BSPF) M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

VA H N N N VA VA N N N VA VA N N N N N N N N N N N N VA DH VA DH-6G VA DH VA DH-6G VA DH VADH VA PM VA PM VA PM - IK VA PM - IK H H H H H - IK H - IK Ti Ti Ni Ni NH NH NH NH NH - IK NH - IK Al Al Al Al W W W W Cu Cu

HSSE PM-HSS Co HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE

TiCN Blu Brt Brt TiN Blu TiCN Brt Blu TiN Blu TiCN Brt Brt Brt Brt Blu Blu Brt Brt Brt Brt Brt Brt Blu Blu Blu Blu TiCN TiCN TiCN TiCN TiCN TiCN Blu Blu TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN Blu Blu TiAlN TiAlN TiAlN TiAlN Brt Brt CrN CrN Ni Ni Blu Blu CrN CrN

DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN5156 DIN5156 DIN5156 DIN5156 DIN5156 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN371 DIN376 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376

*Not available once current stock is depleted

Product Index Taps

Catalogue Code T241 T242 T243 T244 T245 T246 T247 T248 T249 T250 T251 T252 T254 T255 T256 T257 T258 T259 T260 T261 T262 T263 T264 T265 T266 T267 T273 T274 T275 T276 T277 T278 T279 T281 T282 T283 T284 T285 T286 T287 T288 T289 T290 T291 T292 T293 T294 T295 T296 T297 T298 T299 T300 T301 T302 T303 T304 T305 T306 T307

Page No.

Discount Group

Description

Thread

Geometry Type

Tool Material

Surface Finish

Standard

252 252 285 285 286 286 286 286 290 291 290 291 292 305 305 305 307 307 307 310 310 312 312 315 313 313 307 324 325 327 327 335 335 336 336 336 338 338 214 215 214 215 216 216 216 216 219 219 220 220 272 272 273 273 296 296 329 329 330 330

D0406 D0406 D0402 D0406 D0402 D0402 D0402 D0406 D0402 D0402 D0408 D0408 D0410 D0402 D0406 D0402 D0402 D0402 D0402 D0402 D0408 D0402 D0408 D0402 D0402 D0410 D0406 D0402 D0402 D0402 D0408 D0402 D0406 D0402 D0402 D0406 D0402 D0408 D0402 D0402 D0406 D0406 D0402 D0402 D0408 D0408 D0408 D0408 D0414 D0414 D0402 D0406 D0402 D0408 D0402 D0408 D0402 D0406 D0402 D0408

Tap, Spiral Flute, R45 W Tap, Spiral Flute, R45 W Tap, Spiral Flute, R15 N Tap, Spiral Flute, R15 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R50 VA PM Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R50 VA PM Tap, Spiral Flute, R40 NH Tap, Spiral Flute, R15 N Tap, Spiral Flute, R15 N Tap, Spiral Flute, R15 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R40 VA Tap, Spiral Flute, R40 VA Tap, Spiral Flute, R15 H Tap, Spiral Flute, R40 NH Tap, Spiral Flute, R40 NH Tap, Spiral Flute, R40 N Tap, Spiral Flute, R15 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R45 VA DH Tap, Spiral Flute, R15 N Tap, Spiral Flute, R15 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R40 N Tap, Spiral Flute, R45 VA Tap, Spiral Flute, R45 VA Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, GG Tap, Straight Flute, GG Tap, Straight Flute, GG Tap, Straight Flute, GG Tap, Straight Flute, XH Tap, Straight Flute, XH Tap, Straight Flute, VH Tap, Straight Flute, VH Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, GG Tap, Straight Flute, GG Tap, Straight Flute, GG Tap, Straight Flute, GG Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, GG Tap, Straight Flute, GG

M M MF MF MF MF MF MF MF MF MF MF MF UNC UNC UNC UNC UNC UNC UNC UNC 8UN 8UN UNC UNC UNC UNC UNF UNF UNF UNF G (BSPF) G (BSPF) G (BSPF) G (BSPF) G (BSPF) G (BSPF) G (BSPF) M M M M M M M M M M M M MF MF MF MF UNC UNC G (BSPF) G (BSPF) G (BSPF) G (BSPF)

W W N N N N N N VA DH VA PM VA DH VA PM NH N N N N N N VA DH VA DH VA VA H NH NH N N N VA DH VA DH N N N N N VA VA N N N N GG GG GG GG XH XH VH VH N N GG GG GG GG N N GG GG

HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE PM-HSSE V3 HSSE PM-HSSE V3 PM-HSSE V3 HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE PM-HSS Co PM-HSSE V3 PM-HSSE V3 HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE SPM SPM VHM VHM HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE

TiN TiN Brt TiN Brt Brt Blu TiN Blu Blu TiCN TiCN TiAlN Brt TiN Brt Brt Brt Blu Blu TiCN Brt TiCN Blu Blu TiAlN TiN Brt Brt Blu TiCN Brt TiN Brt Blu TiN Blu TiCN Brt Brt TiN TiN Ni + Blu Ni + Blu TiCN TiCN TiCN TiCN TiCN TiCN Brt TiN Ni + Blu TiCN Ni + Blu TiCN Brt TiN Ni + Blu TiCN

DIN371 DIN376 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN374 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN5156 DIN5156 DIN5156 DIN5156 DIN5156 DIN5156 DIN5156 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371 DIN376 DIN371/376 DIN371/376 DIN374 DIN374 DIN374 DIN374 DIN2184-1 DIN2184-1 DIN5156 DIN5156 DIN5156 DIN5156

Product Index Taps

Catalogue Code T308 T309 T311 T313 T315 T319 T320 T321 T322 T323 T324 T325 T326 T327 T328 T329 T330 T331 T332 T335 T336 T337 T338 T339 T340 T343 T344 T345 T346 T349 T350 T351 T352 T357 T358 T359 T360 T361 T363 T365 T367 T369 T371 T373 T375 T377 T379 T381 T383 T384 T385 T386 T387 T388 T389 T390 T391 T392 T393 T394

Page No.

Discount Group

Description

Thread

Geometry Type

Tool Material

Surface Finish

Standard

341 266 266 266 266 267 268 267 268 267 268 269 269 269 269 267 268 270 270 218 218 225 225 247 247 276 276 277 277 334 334 339 339 218 218 231 232 340 340 211 211 212 212 210 210 209 209 213 213 152 152 152 154 154 155 155 155 156 157 157

D0402 D0402 D0402 D0406 D0406 D0408 D0408 D0408 D0408 D0408 D0408 D0410 D0410 D0410 D0410 D0404 D0404 D0408 D0408 D0408 D0408 D0402 D0402 D0402 D0402 D0408 D0408 D0414 D0414 D0402 D0408 D0402 D0408 D0408 D0408 D0402 D0402 D0402 D0408 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0702 D0702 D0702 D0706 D0706 D0702 D0702 D0702 D0702 D0702 D0702

Tap, Straight Flute, UNI Tap, Forming, With No Groove Tap, Forming, With No Groove Tap, Forming, With No Groove Tap, Forming, With No Groove Tap, Forming, With Multi Coolant Groove Tap, Forming, With Multi Coolant Groove Tap, Forming, With Multi Coolant Groove Tap, Forming, With Multi Coolant Groove Tap, Forming, With Multi Coolant Groove Tap, Forming, With Multi Coolant Groove Tap, Forming, With Multi Coolant Groove, UNI Tap, Forming, With Multi Coolant Groove, UNI Tap, Forming, With Multi Coolant Groove, UNI, IK Tap, Forming, With Multi Coolant Groove, UNI, IK Tap, Forming, With Multi Coolant Groove, Cu Tap, Forming, With Multi Coolant Groove, Cu Tap, Forming, With Multi Coolant Groove, NH Tap, Forming, With Multi Coolant Groove, NH Tap, Straight Flute, DC Tap, Straight Flute, DC Tap, Gun, Extra Length, N Tap, Gun, Extra Length, N Tap, Spiral Flute, Extra Length, R40 N Tap, Spiral Flute, Extra Length, R40 N Tap, Straight Flute, XH Tap, Straight Flute, XH Tap, Straight Flute, VH Tap, Straight Flute, VH Tap, Gun, VA PM Tap, Gun, VA PM Tap, Spiral Flute, R50 VA PM Tap, Spiral Flute, R50 VA PM Tap, Straight Flute, DC, IK Tap, Straight Flute, DC, IK Tap, Gun, VA Tap, Gun, VA Tap, Forming, With Multi Coolant Groove Tap, Forming, With Multi Coolant Groove Tap, Spiral Flute, Synchro, L20 Tap, Spiral Flute, Synchro, L20, IK Tap, Spiral Flute, Synchro, R45 Al Tap, Spiral Flute, Synchro, R45 Al, IK Tap, Spiral Flute, Synchro, R50 Tap, Spiral Flute, Synchro, R50, IK Tap, Gun, Synchro Tap, Gun, Synchro, IK Tap, Forming, Synchro Tap, Forming, Synchro, IK Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N, Left Hand Tap, Straight Flute, N, Left Hand Tap, Straight Flute, N, Left Hand Tap, Straight Flute, N, Oversize Tap, Gun, N Tap, Gun, N

NPT M M M M M M M M M M M M M M M M M M M M M M M M MF MF MF MF G (BSPF) G (BSPF) G (BSPF) G (BSPF) M M M M G (BSPF) G (BSPF) M M M M M M M M M M M M M M M M M M M M M

UNI N N N N N N N N N N UNI UNI UNI - IK UNI - IK Cu Cu NH NH DC DC N N N N XH XH VH VH VA PM VA PM VA PM VA PM DC - IK DC - IK VA - 6G VA - 6G N N HSC HSC HSC HSC HSC HSC HSC HSC HSC HSC Taper Intermediate Bottoming Intermediate Bottoming Taper Intermediate Bottoming Bottoming Intermediate Intermediate

HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE SPM SPM SPM SPM HSSE HSSE PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co HSSE HSSE HSSE HSSE SPM SPM VHM VHM PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSS Co PM-HSS Co HSSE HSSE HSSE HSSE PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 HSS HSS HSS HSS HSS HSS HSS HSS HSS HSSE HSSE

Brt Brt Brt TiN TiN TiCN TiCN TiCN TiCN TiCN TiCN TiAlN TiAlN TiAlN TiAlN CrN CrN TiN TiN TiCN TiCN Brt Brt Brt Brt TiCN TiCN TiCN TiCN Blu TiCN Blu TiCN TiCN TiCN Blu Blu Brt TiCN TiCN TiCN CrN CrN TiCN TiCN TiCN TiCN TiN TiN Brt Brt Brt TiN TiN Brt Brt Brt Brt Brt Blu

DIN2184-1 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN371 DIN376 DIN5156 DIN5156 DIN5156 DIN5156 DIN371 DIN376 DIN371 DIN376 DIN5156 DIN5156 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529

Product Index Taps

Catalogue Code T395 T396 T397 T398 T399 T400 T401 T402 T403 T404 T405 T406 T407 T408 T409 T411 T414 T415 T416 T417 T418 T419 T420 T421 T422 T423 T424 T425 T426 T427 T428 T429 T430 T431 T432 T433 T434 T435 T436 T437 T438 T439 T440 T441 T442 T443 T444 T445 T446 T447 T448 T449 T450 T451 T452 T453 T454 T455 T456 T457

Page No.

Discount Group

Description

Thread

Geometry Type

Tool Material

Surface Finish

Standard

157 158 158 158 159 159 160 160 160 162 162 164 164 164 165 165 166 166 166 167 167 168 168 168 169 169 169 170 170 170 171 171 172 173 173 173 174 174 175 175 175 177 177 177 178 178 179 176 176 176 180 180 180 181 181 181 182 182 183 184

D0706 D0702 D0702 D0706 D0702 D0706 D0702 D0702 D0702 D0706 D0706 D0702 D0702 D0706 D0702 D0706 D0702 D0702 D0702 D0706 D0706 D0702 D0702 D0702 D0702 D0702 D0706 D0702 D0702 D0706 D0702 D0706 D0702 D0702 D0702 D0702 D0706 D0706 D0702 D0702 D0702 D0702 D0702 D0706 D0702 D0706 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0706 D0706 D0702 D0702

Tap, Gun, N Tap, Spiral Flute, N Tap, Spiral Flute, N Tap, Spiral Flute, N Tap, Forming, With Single Coolant Groove Tap, Forming, With Single Coolant Groove Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Spiral Flute, N Tap, Spiral Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N, Left Hand Tap, Straight Flute, N, Left Hand Tap, Straight Flute, N, Left Hand Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Spiral Flute, N Tap, Spiral Flute, N Tap, Spiral Flute, N Tap, Forming, With Single Coolant Groove Tap, Forming, With Single Coolant Groove Tap, Machine Nut, Long Shank Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N, Left Hand Tap, Straight Flute, N, Left Hand Tap, Straight Flute, N, Left Hand Tap, Gun, N Tap, Gun, N Tap, Gun, N Tap, Spiral Flute, N Tap, Spiral Flute, N Tap, Forming, With Single Coolant Groove Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N Tap, Straight Flute, N, Left Hand Tap, Gun, N

M M M M M M MF MF MF MF MF MF MF MF MF MF UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNC UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNEF UNEF UNEF 8UN 8UN 8UN BSW BSW BSW BSW BSW BSW BSW

Intermediate Bottoming Bottoming Bottoming Short Short Taper Intermediate Bottoming Intermediate Bottoming Intermediate Intermediate Intermediate Bottoming Bottoming Taper Intermediate Bottoming Intermediate Bottoming Taper Intermediate Bottoming Intermediate Intermediate Intermediate Bottoming Bottoming Bottoming Short Short Bottoming Taper Intermediate Bottoming Intermediate Bottoming Taper Intermediate Bottoming Intermediate Intermediate Intermediate Bottoming Bottoming Short Taper Intermediate Bottoming Taper Intermediate Bottoming Taper Intermediate Bottoming Intermediate Bottoming Bottoming Intermediate

HSSE HSSE HSSE HSSE HSSE HSSE HSS HSS HSS HSS HSS HSSE HSSE HSSE HSSE HSSE HSS HSS HSS HSS HSS HSS HSS HSS HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSSE HSS HSS HSS HSS HSS HSS HSS HSS HSS HSSE HSSE HSSE HSSE HSSE HSSE HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSSE

TiN Blu Brt TiN Brt TiN Brt Brt Brt TiN TiN Brt Blu TiN Brt TiN Brt Brt Brt TiN TiN Brt Brt Brt Brt Blu TiN Brt Blu TiN Brt TiN Brt Brt Brt Brt TiN TiN Brt Brt Brt Brt Blu TiN Brt TiN Brt Brt Brt Brt Brt Brt Brt Brt Brt Brt TiN TiN Brt Brt

ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 BS 949 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529

Product Index Taps

Catalogue Code T458 T459 T460 T461 T462 T463 T464 T465 T466 T467 T468 T469 T470 T471 T472 T473 T474 T475 T476 T477 T478 T479 T480 T481 T482 T483 T484 T485 T486 T487 T488 T489 T490 T637 T648 T649 T650 T651 T654 T655 T666 T667 T668 T669 T670 T671 T676 T677 T678 T679 T680 T681 T682 T683 T684 T685 T686 T687 T688 T689

Page No.

Discount Group

Description

Thread

Geometry Type

Tool Material

Surface Finish

184 184 185 185 185 186 186 187 188 188 188 189 189 189 188 188 188 193 193 194 194 190 190 190 192 192 191 191 195 195 195 176 176 159 223 224 235 236 283 292 303 315 275 275 217 217 255 256 255 256 233 234 271 271 248 249 288 226 227 280

D0702 D0706 D0702 D0702 D0706 D0702 D0706 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0706 D0702 D0702 D0702 D0702 D0702 D0706 D0706 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0402 D0402 D0408 D0408 D0402 D0402 D0408 D0408 D0408 D0408 D0414 D0414 D0408 D0408 D0408 D0408 D0408 D0408 D0414 D0414 D0410 D0410 D0410 D0410 D0410 D0410

Tap, Gun, N BSW Tap, Gun, N BSW Tap, Spiral Flute, N BSW Tap, Spiral Flute, N BSW Tap, Spiral Flute, N BSW Tap, Forming, With Single Coolant Groove BSW Tap, Forming, With Single Coolant Groove BSW Tap, Machine Nut, Long Shank BSW Tap, Straight Flute, N BSF Tap, Straight Flute, N BSF Tap, Straight Flute, N BSF Tap, Straight Flute, N BA Tap, Straight Flute, N BA Tap, Straight Flute, N BA Tap, Straight Flute, N BSB Tap, Straight Flute, N BSB Tap, Straight Flute, N BSB Tap, Straight Flute, Pipe Rc (BSPT) Tap, Straight Flute, Pipe Rc (BSPT) Tap, Straight Flute, Pipe Rp (BSPPL) Tap, Straight Flute, Pipe Pg Tap, Straight Flute, Pipe G (BSPF) Tap, Straight Flute, Pipe G (BSPF) Tap, Straight Flute, Pipe G (BSPF) Tap, Straight Flute, Pipe G (BSPF) Tap, Straight Flute, Pipe G (BSPF) Tap, Gun, Pipe G (BSPF) Tap, Spiral Flute, Pipe G (BSPF) Tap, Straight Flute, Pipe NPSF Tap, Straight Flute, Pipe NPT Tap, Straight Flute, Pipe NPTF Tap, Straight Flute, Tyre Valve Tyre Valve Tap, Straight Flute, Stitching Stitching Tap, Forming, With Single Coolant Groove MF Tap, Gun, N, Left Hand M Tap, Gun, N, Left Hand M Tap, Gun, VA DH M Tap, Gun, VA DH M Tap, Gun, NH MF Tap, Spiral Flute, R40 NH MF Tap, Gun, H UNC Tap, Spiral Flute, R15 H UNC Tap, Straight Flute, DC MF Tap, Straight Flute, DC, IK MF Tap, Straight Flute, GGG M Tap, Straight Flute, GGG M Tap, Spiral Flute, R50 VA PM M Tap, Spiral Flute, R50 VA PM M Tap, Spiral Flute, R50 VA PM M Tap, Spiral Flute, R50 VA PM M Tap, Gun, VA PM M Tap, Gun, VA PM M Tap, Forming, VHM, With Multi Coolant Groove M Tap, Forming, VHM, With Multi Coolant Groove M Tap, Spiral Flute, R50 Black Magic M Tap, Spiral Flute, R50 Black Magic M Tap, Spiral Flute, R50 Black Magic MF Tap, Gun, Black Magic M Tap, Gun, Black Magic M Tap, Gun, Black Magic MF

Intermediate Intermediate Bottoming Bottoming Bottoming Short Short Bottoming Taper Intermediate Bottoming Taper Intermediate Bottoming Taper Intermediate Bottoming Bottoming Bottoming Bottoming Bottoming Taper Intermediate Bottoming Intermediate Bottoming Intermediate Bottoming Bottoming Bottoming Bottoming Bottoming Bottoming Short N - LH N - LH VA DH VA DH NH UNI NH UNI H H DC DC GGG GGG VA PM VA PM VA PM VA PM VA PM VA PM N N UNI UNI UNI UNI UNI UNI

HSSE Blu ISO529 HSSE TiN ISO529 HSSE Brt ISO529 HSSE Blu ISO529 HSSE TiN ISO529 HSSE Brt ISO529 HSSE TiN ISO529 HSS Brt BS 949 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO529 HSS Brt ISO2284 HSS TiN ISO2284 HSS Brt ISO2284 HSS Brt ISO529 HSS Brt ISO2284 HSS Brt ISO2284 HSS Brt ISO2284 HSS TiN ISO2284 HSS TiN ISO2284 HSS Brt ISO529 HSS Brt ISO529 HSS Colour Temp ANSI B94-9 HSS Colour Temp ANSI B94-9 HSS Colour Temp ANSI B94-9 HSS Brt ISO529 HSS Brt ISO529 HSSE Brt ISO529 HSSE Brt DIN371 HSSE Brt DIN376 PM-HSSE V3 Blu DIN371 PM-HSSE V3 Blu DIN376 PM-HSSE V3 Blu DIN374 PM-HSSE V3 Blu DIN374 PM-HSS Co TiCN DIN2184-1 PM-HSS Co TiCN DIN2184-1 PM-HSS Co TiCN DIN374 PM-HSS Co TiCN DIN374 VHM TiCN DIN371 VHM TiCN DIN376 PM-HSSE V3 TiCN DIN371 PM-HSSE V3 TiCN DIN376 PM-HSSE V3 TiCN DIN371 PM-HSSE V3 TiCN DIN376 PM-HSSE V3 TiCN DIN371 PM-HSSE V3 TiCN DIN376 VHM TiCN DIN2174 VHM TiCN DIN2174 PM-HSSE V3 HARDLUBE DIN371 PM-HSSE V3 HARDLUBE DIN376 PM-HSSE V3 HARDLUBE DIN374 PM-HSSE V3 HARDLUBE DIN371 PM-HSSE V3 HARDLUBE DIN376 PM-HSSE V3 HARDLUBE DIN374

Standard

Product Index Taps

Catalogue Code T691 T692 T693 T694 T695 T696 T697 T698 T699 T700 T701 T702 T703 T707 T710 T741 T742 T743 T744 T747 T748 T751 T752 T754 T756 T758 T760 T762 T764 T766 T768 T770 T772 T773 T784 T785 T786 T787 T788 T789 T790 T791 T792 T793 T794 T795 T808 T834 T901 T902 T903 T904 T905 T906 T907 T908 T909 T910

Page No.

Discount Group

Description

Thread

Geometry Type

Tool Material

Surface Finish

Standard

309 326 298 321 311 328 300 323 337 332 325 320 289 293 284 217 217 274 274 271 271 269 269 211 211 212 212 210 210 209 209 213 213 294 263 263 318 318 262 262 317 317 264 264 319 319 342 295 152 160 166 173 181 188 189 188 190 180

D0410 D0410 D0410 D0410 D0408 D0408 D0408 D0408 D0410 D0410 D0402 D0402 D0404 D0408 D0408 D0414 D0414 D0414 D0414 D0414 D0414 D0410 D0410 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0412 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0408 D0402 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702 D0702

Tap, Spiral Flute, R50 Black Magic UNC Tap, Spiral Flute, R50 Black Magic UNF Tap, Gun, Black Magic UNC Tap, Gun, Black Magic UNF Tap, Spiral Flute, R50 VA PM UNC Tap, Spiral Flute, R50 VA PM UNF Tap, Gun, VA PM UNC Tap, Gun, VA PM UNF Tap, Spiral Flute, R50 Black Magic G (BSPF) Tap, Gun, Black Magic G (BSPF) Tap, Spiral Flute, R40 N UNF Tap, Gun, N UNF Tap, Spiral Flute, R45 Al MF Tap, Spiral Flute, R15 H MF Tap, Gun, H MF Tap, Straight Flute, GGG, IK M Tap, Straight Flute, GGG, IK M Tap, Straight Flute, GG MF Tap, Straight Flute, GG, IK MF Tap, Forming, VHM, IK M Tap, Forming, VHM, IK M Tap, Forming, With Multi Coolant Groove, UNI M Tap, Forming, With Multi Coolant Groove, UNI M Tap, Spiral Flute, Synchro, L20 MF Tap, Spiral Flute, Synchro, L20, IK MF Tap, Spiral Flute, Synchro, R45 Al MF Tap, Spiral Flute, Synchro, R45 Al, IK MF Tap, Spiral Flute, Synchro, R50 MF Tap, Spiral Flute, Synchro, R50, IK MF Tap, Gun, Synchro MF Tap, Gun, Synchro, IK MF Tap, Forming, Synchro MF Tap, Forming, Synchro, IK MF Tap, Forming, With Multi Coolant Groove MF Tap, Spiral Flute, L12 Ti MJ Tap, Spiral Flute, L12 Ti MJ Tap, Spiral Flute, L12 Ti UNJC Tap, Spiral Flute, L12 Ti UNJF Tap, Spiral Flute, R15 Ti MJ Tap, Spiral Flute, R15 Ti MJ Tap, Spiral Flute, R15 Ti UNJC Tap, Spiral Flute, R15 Ti UNJF Tap, Spiral Flute, R10 Ni MJ Tap, Spiral Flute, R10 Ni MJ Tap, Spiral Flute, R10 Ni UNJC Tap, Spiral Flute, R10 Ni UNJF Tap, Straight Flute, UNI Rc (BSPT) Tap, Forming, NH MF Set, Tap, 3 piece M Set, Tap, 3 piece MF Set, Tap, 3 piece UNC Set, Tap, 3 piece UNF Set, Tap, 3 piece BSW Set, Tap, 3 piece BSF Set, Tap, 3 piece BA Set, Tap, 3 piece BSB Set, Tap, 3 piece G (BSPF) Set, Tap, 3 piece 8UN

UNI UNI UNI UNI VA PM VA PM VA PM VA PM UNI UNI N N Al H H GGG GGG GG GG N N UNI UNI HSC HSC HSC HSC HSC HSC HSC HSC HSC HSC N Ti Ti Ti Ti Ti Ti Ti Ti Ni Ni Ni Ni UNI NH Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott Taper/Inter/Bott

PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 HSSE PM-HSS Co PM-HSS Co VHM VHM VHM VHM VHM VHM SPM SPM PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 PM-HSSE V3 HSSE PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co PM-HSS Co HSSE PM-HSS Co HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS

HARDLUBE HARDLUBE HARDLUBE HARDLUBE TiCN TiCN TiCN TiCN HARDLUBE HARDLUBE Blu Blu CrN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiAlN TiAlN TiCN TiCN CrN CrN TiCN TiCN TiCN TiCN TiN TiN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiCN TiN Brt Brt Brt Brt Brt Brt Brt Brt Brt Brt

DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN5156 DIN5156 DIN2184-1 DIN2184-1 DIN374 DIN374 DIN374 DIN371 DIN376 DIN371 DIN376 DIN2174 DIN2174 DIN2174 DIN2174 DIN2174 DIN371 DIN376 DIN2184-1 DIN2184-1 DIN371 DIN376 DIN2184-1 DIN2184-1 DIN371 DIN376 DIN2184-1 DIN2184-1 DIN2184-1 DIN2174 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529 ISO529

Product Index Tool holding Catalogue Code Z101 Z110 Z111 Z112 Z113 Z130 Z135

Page No.

Discount Group

Description

199 199 199 199 200 200 200

Z1104 Z1110 Z1110 Z1110 Z1110 Z1108 Z1108

Holder – Synchroflex SFT Attachment Accessory – Collet, Round Drive ER11 Accessory – Collet, Square Drive ER20 Accessory – Collet, Square Drive ER25 Accessory – Collet, Square Drive ER40 Accessory – BT Arbor, 25mm Bore Accessory – BT Pull Stud

CARBIDE DRILLS

• 3xd1 to 30xd1 hole depths • Ultra fine grain type carbide • With and without internal coolant • Advanced multi-layer coatings

Contents

Drills Carbide Finder

Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

Sutton N VA GG AI W Ti Ni H

Page

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

HSS Drills

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

ISO Taps

Catalogue Code D323 D324 D325 D329 D330 D331 D356 D357 D300 D306 D304 D310 VHM VHM VHM VHM VHM Material AlCrN AlCrN Helica Brt TiCN Brt TiCN Surface Finish N N VA GG/H NH Sutton Designation DIN 6537 DIN 6537 DIN 6537 Standard 3xD 3xD 3xD 3xD 3xD Depth of Cut HB HE HA HB HE HA HE Shank Form (DIN 6535) HA

ISO

VDI^ 3323

Material

Condition

N/mm2

Tool Holding

~ 0.15 %C A 125 440 1 Steel - Non-alloy, • • • cast & free cutting ~ 0.45 %C A 190 640 2 • • • QT 250 840 3 • • • ~ 0.75 %C A 270 910 4 • • • QT 300 1010 5 • • • A 180 610 6 Steel - Low alloy & cast • • • < 5% of alloying elements QT 275 930 P 7 • • • QT 300 1010 8 • • • QT 350 1180 9 • • • A 200 680 10 Steel - High alloy, cast & tool • • • HT 325 1100 11 • • • Ferritic / Martensitic A 200 680 12 Steel - Corrosion resistant & cast Martensitic QT 240 810 13 • • • Austenitic AH 180 610 14.1 Stainless Steel Duplex 250 840 M 14.2 Precipitation Hardening 250 840 14.3 • • • Ferritic / Pearlitic 180 610 15 Cast Iron - Grey (GG) • • • Pearlitic 260 880 16 • • • Ferritic 160 570 17 Cast Iron - Nodular • • • K (GGG) Pearlitic 250 840 18 • • • Ferritic 130 460 19 Cast Iron - Malleable • • • Pearlitic 230 780 20 • • • 60 210 21 Aluminum & Magnesium Non Heat Treatable - wrought alloy Heat Treatable AH 100 360 22 75 270 23 Aluminum & Magnesium Non Heat Treatable - cast alloy ≤12% Si Heat Treatable AH 90 320 24 130 460 25 Al & Mg - cast alloy >12% Si Non Heat Treatable N Free cutting, Pb > 1% 110 390 26 Copper & Cu alloys (Brass/Bronze) Brass (CuZn, CuSnZn) 90 320 27 Bronze (CuSn) 100 360 28 29 Non-metallic - Thermosetting & fiber-reinforced plastics 30 Non-metallic - Hard rubber, wood etc. Fe based A 200 680 31 High temp. alloys AH 280 950 32 Ni / Co based A 250 840 33 AH 350 1180 34 C 320 1080 35 CP Titanium 400 MPa 36 Titanium & Ti alloys S • • • Alpha alloys 860 MPa 37.1 • • • Alpha / Beta A 960 MPa 37.2 • • • alloys AH 1170 MPa 37.3 Beta alloys A 830 MPa 37.4 • • • AH 1400 MPa 37.5 HT 45 HRC 38.1 Hardened steel • • • HT 55 HRC 38.2 HT 58 HRC 39.1 H HT 62 HRC 39.2 Chilled C 400 1350 40 Cast Iron • • • HT 55 HRC 41 Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

• Optimal • Effective

• • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • • • • • •

•

• • • • • • • •

•

• • • • •

• • • • • • • • • • •

•

• • •

• • • • • • •

• • • • • • • • • • • • • • • • •

• • • • • •

• • • • •

•

• •

•

Contents 43

Carbide Drills

HSS Drills

ISO Taps

D355 D364 D365 D366 VHM VHM Brt AlCrN Brt AlCrN NC NC -

• • • • • • • • •

• • • • • • • • • • •

•

• • • • • • •

•

• • •

•

• • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • • • • • •

•

• • • • • • • • • • •

• •

• • • • • •

• • • • • • • •

•

• • • • •

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • •

• • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • •

• • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

Tool Holding

• • • • • • • • • • •

DIN Taps

• • • • • • • • • • •

Carbide Endmills

• • • • • • • •

HSS Endmills

VDI^

Reamers

D318 D319 VHM Brt TiCN N ANSI B94-11 HA

Tech Info

D368 D326 D327 D328 D332 D333 D334 D335 D336 D337 D358 D359 D371 D372 D373 D375 VHM VHM VHM VHM VHM VHM Pertura Tip Brt AlCrN AlCrN AlCrN Helica N N N N VA VA DIN 338 DIN 6537 DIN 6537 DIN 6537 5xD 5xD 5xD 8xD 5xD 12 x D 15 x D 20 x D 30 x D HA HA HB HE HA HB HE HA HB HE HA HE HA

Back to index Contents

Drills Carbide, 3 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 3xD, hélice 30°, type N

• Convient aux materiaux jusqu'à 1400 N/mm² • Noyau renforcé • Micro géométrie et traitement surface optimisé pour un bon controle des copeaux • Revêtement AlCrN pour une durée de vie maximum

HSS Drills

Punte Metallo Duro, 3 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 3 x D, R30 N

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

Reamers

R30

140° Form C

d2 (h6)

Item #

D323 0100 D323 0110 D323 0120 D323 0130 D323 0140 D323 0150 D323 0160 D323 0170 D323 0180 D323 0190 D323 0200 D323 0210 D323 0220 D323 0230 D323 0240 D323 0250 D323 0260 D323 0270 D323 0280 D323 0290 D323 0300 D323 0310 D323 0318 D323 0320 D323 0330 D323 0340 D323 0350 D323 0357

D324 0300 D324 0310 D324 0318 D324 0320 D324 0330 D324 0340 D324 0350 D324 0357

D325 0300 D325 0310 D325 0318 D325 0320 D325 0330 D325 0340 D325 0350 D325 0357

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

VHM AlCrN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

HSS Endmills

VHM AlCrN

• • •

Carbide Endmills

D323 D324 D325

VHM AlCrN

ISO VDI 3323

D325 A0210

• • •

DIN Taps

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0318 0320 0330 0340 0350 0357

• • • • • • • • • • • • • • • • • • • • •

Size Ref.

D324 A0210

• • •

d1 (m7) mm inch 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64

D323 A0210

• • • • • • • • •

ISO Taps

• Adecuado para materiales hasta 1400N/mm² • Núcleo Reforzado • Micro geometría y acondicionamiento de la superficie para un control óptimo de la viruta • AlCrN para una máxima vida útil de la herramienta

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 3 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 3xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 3 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 3 x D, R30 N

140° Form C

d2 (h6)

Item #

D323 0360 D323 0370 D323 0380 D323 0390 D323 0397 D323 0400 D323 0410 D323 0420 D323 0430 D323 0437 D323 0440 D323 0450 D323 0460 D323 0470 D323 0476 D323 0480 D323 0490 D323 0500 D323 0510 D323 0516 D323 0520 D323 0530 D323 0540 D323 0550 D323 0556 D323 0560 D323 0570 D323 0580

D324 0360 D324 0370 D324 0380 D324 0390 D324 0397 D324 0400 D324 0410 D324 0420 D324 0430 D324 0437 D324 0440 D324 0450 D324 0460 D324 0470 D324 0476 D324 0480 D324 0490 D324 0500 D324 0510 D324 0516 D324 0520 D324 0530 D324 0540 D324 0550 D324 0556 D324 0560 D324 0570 D324 0580

D325 0360 D325 0370 D325 0380 D325 0390 D325 0397 D325 0400 D325 0410 D325 0420 D325 0430 D325 0437 D325 0440 D325 0450 D325 0460 D325 0470 D325 0476 D325 0480 D325 0490 D325 0500 D325 0510 D325 0516 D325 0520 D325 0530 D325 0540 D325 0550 D325 0556 D325 0560 D325 0570 D325 0580

DIN Taps

140° Form C

Carbide Endmills

140° Form C

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

N R30

• • •

N R30

• • •

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D323 D324 D325

VHM AlCrN

ISO VDI 3323

VHM AlCrN

• • •

0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516 0520 0530 0540 0550 0556 0560 0570 0580

• • • • • • • • • • • • • • • • • • • • •

Size Ref.

D325 A0210

• • • • • • • • •

d1 (m7) mm inch 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.76 3/16 4.8 4.9 5.0 5.1 5.16 13/64 5.2 5.3 5.4 5.5 5.56 7/32 5.6 5.7 5.8

D324 A0210

HSS Endmills

Vc Page #: 476 

D323 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 3 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 3xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 3 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 3 x D, R30 N

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

Reamers

R30

140° Form C

d2 (h6)

Item #

D323 0590 D323 0595 D323 0600 D323 0610 D323 0620 D323 0630 D323 0635 D323 0640 D323 0650 D323 0660 D323 0670 D323 0676 D323 0680 D323 0690 D323 0700 D323 0710 D323 0714 D323 0720 D323 0730 D323 0740 D323 0750 D323 0754 D323 0760 D323 0770 D323 0780 D323 0790 D323 0794 D323 0800

D324 0590 D324 0595 D324 0600 D324 0610 D324 0620 D324 0630 D324 0635 D324 0640 D324 0650 D324 0660 D324 0670 D324 0676 D324 0680 D324 0690 D324 0700 D324 0710 D324 0714 D324 0720 D324 0730 D324 0740 D324 0750 D324 0754 D324 0760 D324 0770 D324 0780 D324 0790 D324 0794 D324 0800

D325 0590 D325 0595 D325 0600 D325 0610 D325 0620 D325 0630 D325 0635 D325 0640 D325 0650 D325 0660 D325 0670 D325 0676 D325 0680 D325 0690 D325 0700 D325 0710 D325 0714 D325 0720 D325 0730 D325 0740 D325 0750 D325 0754 D325 0760 D325 0770 D325 0780 D325 0790 D325 0794 D325 0800

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

VHM AlCrN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

HSS Endmills

VHM AlCrN

• • •

Carbide Endmills

D323 D324 D325

VHM AlCrN

ISO VDI 3323

D325 A0210

• • •

DIN Taps

0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740 0750 0754 0760 0770 0780 0790 0794 0800

• • • • • • • • • • • • • • • • • • • • •

Size Ref.

D324 A0210

• • •

d1 (m7) mm inch 5.9 5.95 15/64 6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.76 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4 7.5 7.54 19/64 7.6 7.7 7.8 7.9 7.94 5/16 8.0

D323 A0210

• • • • • • • • •

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 3 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 3xD, hélice 30°, type N

HSS Drills

• Convient aux materiaux jusqu’à 1400 N/mm² • Noyau renforcé • Micro géométrie et traitement surface optimisé pour un bon controle des copeaux • Revêtement AlCrN pour une durée de vie maximum

Punte Metallo Duro, 3 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 3 x D, R30 N

140° Form C

d2 (h6)

Item #

102

D323 0810 D323 0820 D323 0830 D323 0833 D323 0840 D323 0850 D323 0860 D323 0870 D323 0873 D323 0880 D323 0890 D323 0900 D323 0910 D323 0913 D323 0920 D323 0930 D323 0940 D323 0950 D323 0953 D323 0960 D323 0970 D323 0980 D323 0990 D323 0992 D323 1000 D323 1010 D323 1020 D323 1030

D324 0810 D324 0820 D324 0830 D324 0833 D324 0840 D324 0850 D324 0860 D324 0870 D324 0873 D324 0880 D324 0890 D324 0900 D324 0910 D324 0913 D324 0920 D324 0930 D324 0940 D324 0950 D324 0953 D324 0960 D324 0970 D324 0980 D324 0990 D324 0992 D324 1000 D324 1010 D324 1020 D324 1030

D325 0810 D325 0820 D325 0830 D325 0833 D325 0840 D325 0850 D325 0860 D325 0870 D325 0873 D325 0880 D325 0890 D325 0900 D325 0910 D325 0913 D325 0920 D325 0930 D325 0940 D325 0950 D325 0953 D325 0960 D325 0970 D325 0980 D325 0990 D325 0992 D325 1000 D325 1010 D325 1020 D325 1030

DIN Taps

140° Form C

Carbide Endmills

140° Form C

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

N R30

• • •

N R30

• • •

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D323 D324 D325

VHM AlCrN

ISO VDI 3323

VHM AlCrN

• • •

0810 0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0960 0970 0980 0990 0992 1000 1010 1020 1030

• • • • • • • • • • • • • • • • • • • • •

Size Ref.

D325 A0210

• • • • • • • • •

d1 (m7) mm inch 8.1 8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.6 9.7 9.8 9.9 9.92 25/64 10.0 10.1 10.2 10.3

D324 A0210

HSS Endmills

Vc Page #: 476 

D323 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 3 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 3xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 3 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 3 x D, R30 N

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

N R30

140° Form C

d2 (h6)

Item #

102

107

D324 1032 D324 1040 D324 1050 D324 1060 D324 1070 D324 1080 D324 1090 D324 1100 D324 1110 D324 1111 D324 1120 D324 1130 D324 1140 D324 1150 D324 1160 D324 1170 D324 1180 D324 1190 D324 1191 D324 1200 D324 1250 D324 1269 D324 1280 D324 1300 D324 1349 D324 1350 D324 1380 D324 1400

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

N R30

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

VHM AlCrN

• • •

Reamers

VHM AlCrN

• • •

HSS Endmills

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • •

Carbide Endmills

D323 D324 D325

D325 A0210

ISO VDI 3323

D324 A0210

102

• • •

DIN Taps

d1 (m7) Size Ref. mm inch 1032 10.32 13/32 1040 10.4 1050 10.5 1060 10.6 1070 10.7 1080 10.8 1090 10.9 1100 11.0 1110 11.1 1111 11.11 7/16 1120 11.2 1130 11.3 1140 11.4 1150 11.5 1160 11.6 1170 11.7 1180 11.8 1190 11.9 1191 11.91 15/32 1200 12.0 1250 12.5 1269 12.70 1/2 1280 12.8 1300 13.0 1349 13.49 17/32 1350 13.5 1380 13.8 1400 14.0

D323 A0210

• • • • • • • • •

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 3 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 3xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 3 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 3 x D, R30 N

D325 A0210

VHM

AlCrN

R30

140° Form C

d2 (h6)

Item #

115

123

131

D323 1429 D323 1450 D323 1480 D323 1500 D323 1550 D323 1580 D323 1588 D323 1600 D323 1650 D323 1680 D323 1700 D323 1746 D323 1750 D323 1780 D323 1800 D323 1850 D323 1900 D323 1905 D323 1950 D323 2000

D324 1429 D324 1450 D324 1480 D324 1500 D324 1550 D324 1580 D324 1588 D324 1600 D324 1650 D324 1680 D324 1700 D324 1746 D324 1750 D324 1780 D324 1800 D324 1850 D324 1900 D324 1905 D324 1950 D324 2000

D325 1429 D325 1450 D325 1480 D325 1500 D325 1550 D325 1580 D325 1588 D325 1600 D325 1650 D325 1680 D325 1700 D325 1746 D325 1750 D325 1780 D325 1800 D325 1850 D325 1900 D325 1905 D325 1950 D325 2000

Reamers

d1 (m7) Size Ref. mm inch 1429 14.29 9/16 1450 14.5 1480 14.8 1500 15.0 1550 15.5 1580 15.8 1588 15.88 5/8 1600 16.0 1650 16.5 1680 16.8 1700 17.0 1746 17.46 11/16 1750 17.5 1780 17.8 1800 18.0 1850 18.5 1900 19.0 1905 19.05 3/4 1950 19.5 2000 20.0

D324 A0210

DIN Taps

Vc Page #: 476 

D323 A0210

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

HSS Endmills

ISO Taps

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • •

• • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D323 D324 D325

Tech Info

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 3 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 3 x D, R30 N, IK

• Adecuado para materiales hasta 1400N/mm² • Núcleo Reforzado con refrigeración interior • Micro geometría y acondicionamiento de la superficie para un control óptimo de la viruta • AlCrN para una mayor vida útil de la herramienta

Forets carbure 3xD, hélice 30°, type N, arrosage central

HSS Drills

• Convient aux materiaux jusqu’à 1400 N/mm² • Noyau renforcé avec arrosage central • Micro géométrie et traitement surface optimisé pour un bon controle des copeaux • Revêtement AlCrN pour une durée de vie maximum

Punte Metallo Duro, 3 x D, R30 N, Refrigerazione Interna • Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato con fori di Lubrificazione interna • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN Per massimizzare la vita utensile

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

Carbide Endmills HSS Endmills Reamers

VHM AlCrN

R30 - IK

140° Form C

d2 (h6)

Item #

D329 0300 D329 0310 D329 0318 D329 0320 D329 0330 D329 0340 D329 0350 D329 0357 D329 0360 D329 0370 D329 0380 D329 0390 D329 0397 D329 0400 D329 0410 D329 0420 D329 0430 D329 0437 D329 0440 D329 0450 D329 0460 D329 0470 D329 0476 D329 0480 D329 0490 D329 0500 D329 0510 D329 0516

D330 0300 D330 0310 D330 0318 D330 0320 D330 0330 D330 0340 D330 0350 D330 0357 D330 0360 D330 0370 D330 0380 D330 0390 D330 0397 D330 0400 D330 0410 D330 0420 D330 0430 D330 0437 D330 0440 D330 0450 D330 0460 D330 0470 D330 0476 D330 0480 D330 0490 D330 0500 D330 0510 D330 0516

D331 0300 D331 0310 D331 0318 D331 0320 D331 0330 D331 0340 D331 0350 D331 0357 D331 0360 D331 0370 D331 0380 D331 0390 D331 0397 D331 0400 D331 0410 D331 0420 D331 0430 D331 0437 D331 0440 D331 0450 D331 0460 D331 0470 D331 0476 D331 0480 D331 0490 D331 0500 D331 0510 D331 0516

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

D329 D330 D331

VHM AlCrN

ISO VDI 3323

D331 A0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

DIN Taps

0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516

D330 A0210

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • • • •

d1 (m7) mm inch 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.76 3/16 4.8 4.9 5.0 5.1 5.16 13/64

D329 A0210

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 3 x D, R30 N, IK • Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Carbide Drills

Brocas de Metal Duro, 3 x D, R30 N, IK

Forets carbure 3xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 3 x D, R30 N, Refrigerazione Interna

ISO Taps

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato con fori di Lubrificazione interna • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN Per massimizzare la vita utensile

N R30 - IK

140° Form C

d2 (h6)

Item #

D329 0520 D329 0530 D329 0540 D329 0550 D329 0556 D329 0560 D329 0570 D329 0580 D329 0590 D329 0595 D329 0600 D329 0610 D329 0620 D329 0630 D329 0635 D329 0640 D329 0650 D329 0660 D329 0670 D329 0676 D329 0680 D329 0690 D329 0700 D329 0710 D329 0714 D329 0720 D329 0730 D329 0740

D330 0520 D330 0530 D330 0540 D330 0550 D330 0556 D330 0560 D330 0570 D330 0580 D330 0590 D330 0595 D330 0600 D330 0610 D330 0620 D330 0630 D330 0635 D330 0640 D330 0650 D330 0660 D330 0670 D330 0676 D330 0680 D330 0690 D330 0700 D330 0710 D330 0714 D330 0720 D330 0730 D330 0740

D331 0520 D331 0530 D331 0540 D331 0550 D331 0556 D331 0560 D331 0570 D331 0580 D331 0590 D331 0595 D331 0600 D331 0610 D331 0620 D331 0630 D331 0635 D331 0640 D331 0650 D331 0660 D331 0670 D331 0676 D331 0680 D331 0690 D331 0700 D331 0710 D331 0714 D331 0720 D331 0730 D331 0740

DIN Taps

N R30 - IK

Carbide Endmills

N R30 - IK

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

D329 D330 D331

VHM AlCrN

ISO VDI 3323

VHM AlCrN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

0520 0530 0540 0550 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740

D331 A0210

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • • • •

d1 (m7) mm inch 5.2 5.3 5.4 5.5 5.56 7/32 5.6 5.7 5.8 5.9 5.95 15/64 6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.75 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4

D330 A0210

HSS Endmills

Vc Page #: 476 

D329 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 3 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 3 x D, R30 N, IK

Forets carbure 3xD, hélice 30°, type N, arrosage central

HSS Drills

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

Carbide Endmills HSS Endmills Reamers

VHM AlCrN

R30 - IK

140° Form C

d2 (h6)

Item #

D329 0750 D329 0754 D329 0760 D329 0770 D329 0780 D329 0790 D329 0794 D329 0800 D329 0810 D329 0820 D329 0830 D329 0833 D329 0840 D329 0850 D329 0860 D329 0870 D329 0873 D329 0880 D329 0890 D329 0900 D329 0910 D329 0913 D329 0920 D329 0930 D329 0940 D329 0950 D329 0953 D329 0960

D330 0750 D330 0754 D330 0760 D330 0770 D330 0780 D330 0790 D330 0794 D330 0800 D330 0810 D330 0820 D330 0830 D330 0833 D330 0840 D330 0850 D330 0860 D330 0870 D330 0873 D330 0880 D330 0890 D330 0900 D330 0910 D330 0913 D330 0920 D330 0930 D330 0940 D330 0950 D330 0953 D330 0960

D331 0750 D331 0754 D331 0760 D331 0770 D331 0780 D331 0790 D331 0794 D331 0800 D331 0810 D331 0820 D331 0830 D331 0833 D331 0840 D331 0850 D331 0860 D331 0870 D331 0873 D331 0880 D331 0890 D331 0900 D331 0910 D331 0913 D331 0920 D331 0930 D331 0940 D331 0950 D331 0953 D331 0960

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

D329 D330 D331

VHM AlCrN

ISO VDI 3323

D331 A0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

DIN Taps

0750 0754 0760 0770 0780 0790 0794 0800 0810 0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0960

D330 A0210

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • • • •

d1 (m7) mm inch 7.5 7.54 19/64 7.6 7.7 7.8 7.9 7.94 5/16 8.0 8.1 8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.6

D329 A0210

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Brocas de Metal Duro, 3 x D, R30 N, IK

Forets carbure 3xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 3 x D, R30 N, Refrigerazione Interna

ISO Taps

140° Form C

d2 (h6)

Item #

102

D329 0970 D329 0980 D329 0990 D329 0992 D329 1000 D329 1010 D329 1020 D329 1030 D329 1032 D329 1040 D329 1050 D329 1060 D329 1070 D329 1080 D329 1090 D329 1100 D329 1110 D329 1111 D329 1120 D329 1130 D329 1140 D329 1150 D329 1160 D329 1170 D329 1180 D329 1190 D329 1191 D329 1200

D330 0970 D330 0980 D330 0990 D330 0992 D330 1000 D330 1010 D330 1020 D330 1030 D330 1032 D330 1040 D330 1050 D330 1060 D330 1070 D330 1080 D330 1090 D330 1100 D330 1110 D330 1111 D330 1120 D330 1130 D330 1140 D330 1150 D330 1160 D330 1170 D330 1180 D330 1190 D330 1191 D330 1200

D331 0970 D331 0980 D331 0990 D331 0992 D331 1000 D331 1010 D331 1020 D331 1030 D331 1032 D331 1040 D331 1050 D331 1060 D331 1070 D331 1080 D331 1090 D331 1100 D331 1110 D331 1111 D331 1120 D331 1130 D331 1140 D331 1150 D331 1160 D331 1170 D331 1180 D331 1190 D331 1191 D331 1200

DIN Taps

N R30 - IK

Carbide Endmills

N R30 - IK

M 8

N R30 - IK

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

VHM AlCrN

D329 D330 D331

VHM AlCrN

ISO VDI 3323

D331 A0210

• • • • • • • • • • • •

d1 (m7) Size Ref. mm inch 9.7 0970 9.8 0980 9.9 0990 9.92 25/64 0992 1000 10.0 1010 10.1 1020 10.2 1030 10.3 1032 10.32 13/32 1040 10.4 1050 10.5 1060 10.6 1070 10.7 1080 10.8 1090 10.9 1100 11.0 1110 11.1 1111 11.11 7/16 1120 11.2 1130 11.3 1140 11.4 1150 11.5 1160 11.6 1170 11.7 1180 11.8 1190 11.9 1191 11.91 15/32 1200 12.0

D330 A0210

HSS Endmills

Vc Page #: 476 

D329 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 3 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 3 x D, R30 N, IK

Forets carbure 3xD, hélice 30°, type N, arrosage central

HSS Drills

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

Reamers

R30 - IK

140° Form C

d2 (h6)

Item #

107

115

123

131

D329 1250 D329 1269 D329 1280 D329 1300 D329 1349 D329 1350 • D329 1400 D329 1429 D329 1450 • D329 1500 D329 1550 • D329 1588 D329 1600 D329 1650 D329 1700 D329 1746 D329 1750 D329 1800 D329 1850 D329 1900 D329 1905 D329 1950 D329 2000

D330 1250 D330 1269 D330 1280 D330 1300 D330 1349 D330 1350 • D330 1400 D330 1429 D330 1450 • D330 1500 D330 1550 • D330 1588 D330 1600 D330 1650 D330 1700 D330 1746 D330 1750 D330 1800 D330 1850 D330 1900 D330 1905 D330 1950 D330 2000

D331 1250 D331 1269 D331 1280 D331 1300 D331 1349 D331 1350 • D331 1400 D331 1429 D331 1450 • D331 1500 D331 1550 • D331 1588 D331 1600 D331 1650 D331 1700 D331 1746 D331 1750 D331 1800 D331 1850 D331 1900 D331 1905 D331 1950 D331 2000

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

VHM AlCrN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

HSS Endmills

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Carbide Endmills

D329 D330 D331

D331 A0210

ISO VDI 3323

D330 A0210

107

• • • • • • • • • • • •

DIN Taps

d1 (m7) Size Ref. mm inch 1250 12.5 1269 12.70 1/2 1280 12.8 1300 13.0 1349 13.49 17/32 1350 13.5 1380 13.8 1400 14.0 1429 14.29 9/16 1450 14.5 1480 14.8 1500 15.0 1550 15.5 1580 15.8 1588 15.88 5/8 1600 16.0 1650 16.5 1700 17.0 1746 17.46 11/16 1750 17.5 1800 18.0 1850 18.5 1900 19.0 1905 19.05 3/4 1950 19.5 2000 20.0

D329 A0210

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

• Excellent solution for stainless steels and difficult super alloy type materials • Optimised geometry ensures no work hardening and high productivity • HELICA for outstanding oxidation resistance and hot hardness

Carbide Drills

Drills Carbide 3 x D, R30 VA Black Magic watch the video

Forets carbure 3xD, hélice 30° , VA Black magic, arrosge central

• Convient aux alliages et super alliages, Inox, Titane, Inconel et Duplex • Géométrie optimisée pour un bon controle des copeaux • Revêtement Helica pour une meilleure résistance à l’oxidation et la haute température

Punte Metallo Duro, 3 x D, R30 N, VA Black Magic

HSS Drills

• Eccellente soluzione specifica per acciai inossidabili e super leghe • Geometria ottimizzata per garantire facile lavorabilità ad alta produzione • HELICA per un eccezionale resistenza a ossidazione da alte temperature

Brocas de Metal Duro, 3 x D, R30 VA Black Magic

ISO Taps

• Excelente solución para aceros inoxidables y super aleaciones de difícil mecanización • La geometría optimizada asegura no endurecer el trabajo para una alta productividad • HELICA para una excelente resistencia a la oxidación y dureza en caliente

d2 (h6)

Item #

D356 0300 D356 0310 D356 0318 D356 0320 D356 0330 D356 0340 D356 0350 D356 0357 D356 0360 D356 0370 D356 0380 D356 0390 D356 0397 D356 0400 D356 0410 D356 0420 D356 0430 D356 0437 D356 0440 D356 0450 D356 0460 D356 0470 D356 0476 D356 0480 D356 0490 D356 0500 D356 0510 D356 0516

D357 0300 D357 0310 D357 0318 D357 0320 D357 0330 D357 0340 D357 0350 D357 0357 D357 0360 D357 0370 D357 0380 D357 0390 D357 0397 D357 0400 D357 0410 D357 0420 D357 0430 D357 0437 D357 0440 D357 0450 D357 0460 D357 0470 D357 0476 D357 0480 D357 0490 D357 0500 D357 0510 D357 0516

DIN Taps

Carbide Endmills

140° 4 Facet Form C

M 8

140° 4 Facet Form C

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • •

VA R30 - IK

• •

• • • • • • • • • • • • • • • •

D356 D357

VA R30 - IK

ISO VDI 3323

VHM HELICA

HSS Endmills

0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516

VHM HELICA

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • •

d1 (m7) mm inch 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.76 3/16 4.8 4.9 5.0 5.1 5.16 13/64

D357 A0210

Reamers

Vc Page #: 476 

D356 A0210

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide 3 x D, R30 VA Black Magic

Carbide Drills

watch the video

Forets carbure 3xD, hélice 30° , VA Black magic, arrosge central

HSS Drills

Punte Metallo Duro, 3 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 3 x D, R30 VA Black Magic

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

HSS Endmills Reamers

140° 4 Facet Form C

d2 (h6)

Item #

D356 0520 D356 0530 D356 0540 D356 0550 D356 0556 D356 0560 D356 0570 D356 0580 D356 0590 D356 0595 D356 0600 D356 0610 D356 0620 D356 0630 D356 0635 D356 0640 D356 0650 D356 0660 D356 0670 D356 0676 D356 0680 D356 0690 D356 0700 D356 0710 D356 0714 D356 0720 D356 0730 D356 0740

D357 0520 D357 0530 D357 0540 D357 0550 D357 0556 D357 0560 D357 0570 D357 0580 D357 0590 D357 0595 D357 0600 D357 0610 D357 0620 D357 0630 D357 0635 D357 0640 D357 0650 D357 0660 D357 0670 D357 0676 D357 0680 D357 0690 D357 0700 D357 0710 D357 0714 D357 0720 D357 0730 D357 0740

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

VA R30 - IK

M 8

• • • • • • • • • • • • • • • •

Tech Info

VA R30 - IK

• • • • • • • • • •

Carbide Endmills

D356 D357

VHM HELICA

ISO VDI 3323

VHM HELICA

• •

DIN Taps

0520 0530 0540 0550 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740

D357 A0210

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • •

d1 (m7) mm inch 5.2 5.3 5.4 5.5 5.56 7/32 5.6 5.7 5.8 5.9 5.95 15/64 6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.76 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4

D356 A0210

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Drills Carbide 3 x D, R30 VA Black Magic watch the video

Forets carbure 3xD, hélice 30° , VA Black magic, arrosge central

HSS Drills

Punte Metallo Duro, 3 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 3 x D, R30 VA Black Magic

ISO Taps

d2 (h6)

Item #

D356 0750 D356 0754 D356 0760 D356 0770 D356 0780 D356 0790 D356 0794 D356 0800 D356 0810 D356 0820 D356 0830 D356 0833 D356 0840 D356 0850 D356 0860 D356 0870 D356 0873 D356 0880 D356 0890 D356 0900 D356 0910 D356 0913 D356 0920 D356 0930 D356 0940 D356 0950 D356 0953 D356 0960

D357 0750 D357 0754 D357 0760 D357 0770 D357 0780 D357 0790 D357 0794 D357 0800 D357 0810 D357 0820 D357 0830 D357 0833 D357 0840 D357 0850 D357 0860 D357 0870 D357 0873 D357 0880 D357 0890 D357 0900 D357 0910 D357 0913 D357 0920 D357 0930 D357 0940 D357 0950 D357 0953 D357 0960

DIN Taps

Carbide Endmills

140° 4 Facet Form C

M 8

140° 4 Facet Form C

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • •

VA R30 - IK

• •

• • • • • • • • • • • • • • • •

D356 D357

VA R30 - IK

ISO VDI 3323

VHM HELICA

HSS Endmills

0750 0754 0760 0770 0780 0790 0794 0800 0810 0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0960

VHM HELICA

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • •

d1 (m7) mm inch 7.5 7.54 19/64 7.6 7.7 7.8 7.9 7.94 5/16 8.0 8.1 8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.6

D357 A0210

Reamers

Vc Page #: 476 

D356 A0210

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide 3 x D, R30 VA Black Magic

Carbide Drills

watch the video

Forets carbure 3xD, hélice 30° , VA Black magic, arrosge central

HSS Drills

Punte Metallo Duro, 3 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 3 x D, R30 VA Black Magic

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 476 

140° 4 Facet Form C

Item #

102

D356 0970 D356 0980 D356 0990 D356 0992 D356 1000 D356 1010 D356 1020 D356 1030 D356 1032 D356 1040 D356 1050 D356 1060 D356 1070 D356 1072 D356 1080 D356 1090 D356 1100 D356 1110 D356 1111 D356 1120 D356 1130 D356 1140 D356 1150 D356 1151 D356 1160 D356 1170 D356 1180 D356 1190

D357 0970 D357 0980 D357 0990 D357 0992 D357 1000 D357 1010 D357 1020 D357 1030 D357 1032 D357 1040 D357 1050 D357 1060 D357 1070 D357 1072 D357 1080 D357 1090 D357 1100 D357 1110 D357 1111 D357 1120 D357 1130 D357 1140 D357 1150 D357 1151 D357 1160 D357 1170 D357 1180 D357 1190

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

140° 4 Facet Form C

d2 (h6)

• • • • • • • • • • • • • • • •

Tech Info

VA R30 - IK

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Reamers

VA R30 - IK

• • • • • • • • • •

HSS Endmills

VHM HELICA

• • • • • • • • • •

Carbide Endmills

D356 D357

VHM HELICA

ISO VDI 3323

D357 A0210

• •

DIN Taps

d1 (m7) Size Ref. mm inch 9.7 0970 9.8 0980 9.9 0990 9.92 25/64 0992 1000 10.0 1010 10.1 1020 10.2 1030 10.3 1032 10.32 13/32 1040 10.4 1050 10.5 1060 10.6 1070 10.7 1072 10.72 27/64 1080 10.8 1090 10.9 1100 11.0 1110 11.1 1111 11.11 7/16 1120 11.2 1130 11.3 1140 11.4 1150 11.5 1151 11.51 29/64 1160 11.6 1170 11.7 1180 11.8 1190 11.9

D356 A0210

• Optimal • Effective NOTE:NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Drills Carbide 3 x D, R30 VA Black Magic watch the video

Forets carbure 3xD, hélice 30° , VA Black magic, arrosge central

HSS Drills

Punte Metallo Duro, 3 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 3 x D, R30 VA Black Magic

ISO Taps

M 8

VA R30 - IK

140° 4 Facet Form C

Item # D356 1191 D356 1200 D356 1231 D356 1250 D356 1269 D356 1280 D356 1300 D356 1310 D356 1349 D356 1350 D356 1389 D356 1400 D356 1429 D356 1450 D356 1468 D356 1500 D356 1508 D356 1548 D356 1550 D356 1588 D356 1600 D356 1650 D356 1667 D356 1700 D356 1746 D356 1750 D356 1800 D356 1826 D356 1850 D356 1900 D356 1905 D356 1950 D356 2000

Item # D357 1191 D357 1200 D357 1231 D357 1250 D357 1269 D357 1280 D357 1300 D357 1310 D357 1349 D357 1350 D357 1389 D357 1400 D357 1429 D357 1450 D357 1468 D357 1500 D357 1508 D357 1548 D357 1550 D357 1588 D357 1600 D357 1650 D357 1667 D357 1700 D357 1746 D357 1750 D357 1800 D357 1826 D357 1850 D357 1900 D357 1905 D357 1950 D357 2000

DIN Taps

VA R30 - IK

Carbide Endmills

VHM HELICA

HSS Endmills

12 12 14 14 14 14 14 14 14 14 14 14 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 20 20 20 20 20 20

VHM HELICA

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

d2 (h6)

• • • • • • • • • •

• •

• • • • • • • • • • • • • • • •

D356 D357

55 55 60 60 60 60 60 60 60 60 60 60 65 65 65 65 65 65 65 65 65 73 73 73 73 73 73 79 79 79 79 79 79

ISO VDI 3323

102 102 107 107 107 107 107 107 107 107 107 107 115 115 115 115 115 115 115 115 115 123 123 123 123 123 123 131 131 131 131 131 131

• • • • • • • • • •

d1 (m7) Size Ref. mm inch 1191 11.91 15/32 1200 12.0 1231 12.30 31/64 1250 12.5 1269 12.70 1/2 1280 12.8 1300 13.0 1310 13.10 33/64 1349 13.49 17/32 1350 13.5 1389 13.89 35/64 1400 14.0 1429 14.29 9/16 1450 14.5 1468 14.68 37/64 1500 15.0 1508 15.08 19/32 1548 15.48 39/64 1550 15.5 1588 15.88 5/8 1600 16.0 1650 16.5 1667 16.67 21/32 1700 17.0 1746 17.46 11/16 1750 17.5 1800 18.0 1826 18.26 23/32 1850 18.5 1900 19.0 1905 19.05 3/4 1950 19.5 2000 20.0

D357 A0210

Reamers

Vc Page #: 476 

D356 A0210

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 3 x D Straight Flute

Carbide Drills

• Suitable for steels 50-60 HRC • Rigid twist drill with straight flutes • For drilling short chipping or abrasive materials • Straight flutes for increased strength and chip control • TiCN coated for longer tool life

Brocas de Metal Duro, 3 x D, Ranura recta

• Adecuado para aceros de 50-60 HRC • Broca helicoidal rígida con ranuras rectas • Para taladrado de materiales de viruta corta o materiales abrasivos • Ranuras rectas para mayor resistencia y control de viruta • Recubrimiento TiCN para una mayor vida útil de la herramienta

Forets carbure 3xD, goujure droite

HSS Drills

• Convient aux materiaux jusqu'à 60HRC • Noyau rigide renforcé, goujure droite • Pour le perçage des materiaux à copeaux courts ou abrasifs Revêtement TiCN pour une durée de vie maximum

Punte Metallo Duro, 3 x D Elica Dritta

• Ideale per acciai da 50-60 HRC • Elica rigida grazie al tagliente dritto • Per trucioli piccoli o materiali abrasivi • Taglienti dritti per aumentare resistenza e controllo truciolo • TiCN per massimizzare la vita utensile

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 476 

Item #

1.59

2.0

2.5

3.0

3.18

3.5

4.0

4.5

4.76

5.0

5.5

6.0

6.35

6.5

7.0

7.5

7.94

8.0

8.5

9.0

9.53

10.0

11.0

11.11

12.0

12.7

D306 0150 D306 0159 D306 0200 D306 0250 D306 0300 D306 0318 D306 0350 D306 0400 D306 0450 D306 0476 D306 0500 D306 0550 D306 0600 D306 0635 D306 0650 D306 0700 D306 0750 D306 0794 D306 0800 D306 0850 D306 0900 D306 0953 D306 1000 D306 1100 D306 1111 D306 1200 D306 1269

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

-0.025

D300 0150 D300 0159 D300 0200 D300 0250 D300 0300 D300 0318 D300 0350 D300 0400 D300 0450 D300 0476 D300 0500 D300 0550 D300 0600 D300 0635 D300 0650 D300 0700 D300 0750 D300 0794 D300 0800 D300 0850 D300 0900 D300 0953 D300 1000 D300 1100 D300 1111 D300 1200 D300 1269

M 8

-0.025

S Titanium & Super Alloys H Hard Materials

• •

Straight Flute 140° Type C (Facet)

• •

Straight Flute 140° Type C (Facet)

• • • • • • • • • •

Tech Info

GG/H

1.5

• • • • • • • • • • • •

Reamers

TiCN

GG/H

• •

HSS Endmills

VHM

Brt

12.7

• •

Carbide Endmills

D300 D306

VHM

ISO VDI 3323

D306 A0206

• •

DIN Taps

d1 (m7) Size Ref. mm inch 1.5 0150 1.59 1/16 0159 2.0 0200 2.5 0250 3.0 0300 3.18 1/8 0318 3.5 0350 4.0 0400 4.5 0450 4.76 3/16 0476 5.0 0500 5.5 0550 6.0 0600 6.35 1/4 0635 6.5 0650 7.0 0700 7.5 0750 7.94 5/16 0794 8.0 0800 8.5 0850 9.0 0900 9.53 3/8 0953 1000 10.0 1100 11.0 1111 11.11 7/16 1200 12.0 12.7 1/2 1269

D300 A0202

• Optimal • Effective

Contents

Back to index

Drills Carbide, 3 x D, R15 NH

Carbide Drills

• Rigid twist drill with slow spiral 15° flutes • Suitable for martensitic & precipitation hardening, stainless steels & tool steels • For drilling short chipping or abrasive materials

Forets carbure 3xD, hélice 15° NH

HSS Drills

• Convient aux inox, aciers à outils et fontes • Noyau rigide renforcé, hélice 15° • Pour le perçage des materiaux à copeaux courts ou abrasifs Revêtement TiCN pour une durée de vie maximum

Punte Metallo Duro, 3 x D ,R15 NH

• Elica rigida con talienti a 15° • Ideale per acciai martensitici & tempra a precipitazione, acciai inossidabili & acciai per utensili • Per trucioli piccoli o materiali abrasivi

Brocas de Metal Duro, 3 x D, R15 NH

Item #

1.0

1.5

D304 0100 D304 0150

1.59

1.6

2.0

2.38

2.5

3.0

3.18

3.3

3.5

3.97

4.0

4.2

4.5

4.76

5.0

5.5

5.56

6.0

6.35

6.5

6.8

7.0

7.14

7.5

7.94

8.0

D310 0100 D310 0150 D310 0159 D310 0160 D310 0200 D310 0238 D310 0250 D310 0300 D310 0318 D310 0330 D310 0350 D310 0397 D310 0400 D310 0420 D310 0450 D310 0476 D310 0500 D310 0550 D310 0556 D310 0600 D310 0635 D310 0650 D310 0680 D310 0700 D310 0714 D310 0750 D310 0794 D310 0800

D304 0160 D304 0200 D304 0250 D304 0300 D304 0330 D304 0350 D304 0400 D304 0420 D304 0450 D304 0500 D304 0550 D304 0600 D304 0650 D304 0680 D304 0700 D304 0750 D304 0800 K

DIN Taps

-0.025

Carbide Endmills

135° 4 Facet Form C

-0.025

HSS Endmills

135° 4 Facet Form C

M 8

R15

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • •

D304 D310

• • • • • •

VDI 3323

R15

ISO

TiCN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • •

0100 0150 0159 0160 0200 0238 0250 0300 0318 0330 0350 0397 0400 0420 0450 0476 0500 0550 0556 0600 0635 0650 0680 0700 0714 0750 0794 0800

VHM

Brt

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

VHM

• •

d1 (m7) mm inch 1.0 1.5 1.59 1/16 1.6 2.0 2.38 3/32 2.5 3.0 3.18 1/8 3.3 3.5 3.97 5/32 4.0 4.2 4.5 4.76 3/16 5.0 5.5 5.56 7/32 6.0 6.35 1/4 6.5 6.8 7.0 7.14 9/32 7.5 7.94 5/16 8.0

D310 A0206

Reamers

Vc Page #: 476 

D304 A0202

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Tool Holding

ISO Taps

• Broca helicoidal rígida con ranuras de 15° • Adecuada para aceros inoxidables martensíticos, de precipitación y aceros para herramientas • Para taladrado de materiales de viruta corta o materiales abrasivos

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Back to index Contents

Drills Carbide, 3 x D, R15 NH

Carbide Drills

• Rigid twist drill with slow spiral 15° flutes • Suitable for martensitic & precipitation hardening, stainless steels & tool steels • For drilling short chipping or abrasive materials

Forets carbure 3xD, hélice 15° NH

HSS Drills

Punte Metallo Duro, 3 x D ,R15 NH

• Elica rigida con talienti a 15° • Ideale per acciai martensitici & tempra a precipitazione, acciai inossidabili & acciai per utensili • Per trucioli piccoli o materiali abrasivi

Brocas de Metal Duro, 3 x D, R15 NH

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 476 

DIN Taps

d1 (m7) Size Ref. mm inch 8.5 0850 8.73 11/32 0873 9.0 0900 9.5 0950 9.53 3/8 0953 1000 10.0 1032 10.32 13/32 1050 10.5 1100 11.0 1111 11.11 7/16 1150 11.5 1191 11.91 15/32 1200 12.0 12.7 1/2 1269

D304

D310

A0202

A0206

VHM

Brt

TiCN

R15

135° 4 Facet Form C

-0.025

Carbide Endmills

Item #

8.5

D304 0850

8.73

9.0

9.5

9.53

10.0

10.32

10.5

11.0

11.11

11.5

11.91

12.0

12.7

D310 0850 D310 0873 D310 0900 D310 0950 D310 0953 D310 1000 D310 1032 D310 1050 D310 1100 D310 1111 D310 1150 D310 1191 D310 1200 D310 1269

D304 0900 D304 0950 D304 1000 D304 1050 D304 1100 D304 1150 D304 1200

HSS Endmills Reamers P 5

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • •

D304 D310

• • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 5 x D, R25 N

Carbide Drills

• Suitable for steels and abrasive applications • Designed to allow high feed rates with good chip flow • Four facet point ensures accurate holes

Forets carbure 5xD, hélice 25°, type N

• Convient aux applications générales • Géométrie pour les copeaux longs • Affutâge 4 faces pour un centrage optimisé

HSS Drills

Punte Metallo Duro, 5 x D, R25 N

• Ideale per acciai e materiali abrasivi • Progettata per permettere forti avanzamenti e controllo truciolo • Doppio margine per assicurare precisione dei fori

Brocas de Metal Duro, 5 x D, R25 N

ISO Taps

• Adecuado para aceros y materiales abrasivos • Diseñado para permitir altas velocidades de corte con buen flujo de viruta • Faceta de cuatro puntos que asegura agujeros precisos

ISO

D368

M 8

d1 (h8) 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3

75 80 80 80 80 80 86 86 86 86 86 86 93 93 93 93 93 93 93 101 101 101 101 101 101 101 109 109 109 109 109 109

43 47 47 47 47 47 52 52 52 52 52 52 57 57 57 57 57 57 57 63 63 63 63 63 63 63 69 69 69 69 69 69

Item #

DIN Taps

0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730

-0.025

D368 0420 D368 0430 D368 0440 D368 0450 D368 0460 D368 0470 D368 0480 D368 0490 D368 0500 D368 0510 D368 0520 D368 0530 D368 0540 D368 0550 D368 0560 D368 0570 D368 0580 D368 0590 D368 0600 D368 0610 D368 0620 D368 0630 D368 0640 D368 0650 D368 0660 D368 0670 D368 0680 D368 0690 D368 0700 D368 0710 D368 0720 D368 0730 S

Carbide Endmills

Size Ref.

118° Form C

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • •

VDI 3323

Item # D368 0100 D368 0110 D368 0120 D368 0130 D368 0140 D368 0150 D368 0160 D368 0170 D368 0180 D368 0190 D368 0200 D368 0210 D368 0220 D368 0230 D368 0240 D368 0250 D368 0260 D368 0270 D368 0280 D368 0290 D368 0300 D368 0310 D368 0320 D368 0330 D368 0340 D368 0350 D368 0360 D368 0370 D368 0380 D368 0390 D368 0400 D368 0410

N R25

HSS Endmills

l2 13 15 17 17 19 19 21 21 23 23 24 24 28 28 31 31 31 34 34 34 33 36 36 36 39 39 39 39 43 43 43 43

Brt

Reamers

l1 34 36 38 38 40 40 43 43 46 46 49 49 53 53 57 57 57 61 61 61 61 65 65 65 70 70 70 70 75 75 75 75

VHM

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1

• • • • •

d1 (h8)

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410

• • • •

Size Ref.

A0208

Tech Info

Vc Page #: 477 

D368

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 5 x D, R25 N

Carbide Drills

• Suitable for steels and abrasive applications • Designed to allow high feed rates with good chip flow • Four facet point ensures accurate holes

Forets carbure 5xD, hélice 25°, type N

• Convient aux applications générales • Géométrie pour les copeaux longs • Affutâge 4 faces pour un centrage optimisé

HSS Drills

Punte Metallo Duro, 5 x D, R25 N

• Ideale per acciai e materiali abrasivi • Progettata per permettere forti avanzamenti e controllo truciolo • Doppio margine per assicurare precisione dei fori

Brocas de Metal Duro, 5 x D, R25 N

• Adecuado para aceros y materiales abrasivos • Diseñado para permitir altas velocidades de corte con buen flujo de viruta • Faceta de cuatro puntos que asegura agujeros precisos

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 477 

Carbide Endmills HSS Endmills Reamers

109 109 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133 133 133 133

69 69 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 87 87

D368

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

Size Ref.

1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180 1190 1200 1210 1220 1230 1240 1250 1260 1270 1280 1290 1300

d1 (h8) 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0

133 142 142 142 142 142 142 142 142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151

87 94 94 94 94 94 94 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101

Brt

N R25 118° Form C -0.025

Item # D368 1060 D368 1070 D368 1080 D368 1090 D368 1100 D368 1110 D368 1120 D368 1130 D368 1140 D368 1150 D368 1160 D368 1170 D368 1180 D368 1190 D368 1200 D368 1210 D368 1220 D368 1230 D368 1240 D368 1250 D368 1260 D368 1270 D368 1280 D368 1290 D368 1300

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • •

Tech Info

ISO VDI 3323

Item # D368 0740 D368 0750 D368 0760 D368 0770 D368 0780 D368 0790 D368 0800 D368 0810 D368 0820 D368 0830 D368 0840 D368 0850 D368 0860 D368 0870 D368 0880 D368 0890 D368 0900 D368 0910 D368 0920 D368 0930 D368 0940 D368 0950 D368 0960 D368 0970 D368 0980 D368 0990 D368 1000 D368 1010 D368 1020 D368 1030 D368 1040 D368 1050

VHM

S Titanium & Super Alloys H Hard Materials

•

DIN Taps

7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5

• • • • •

d1 (h8)

0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930 0940 0950 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050

• • • •

Size Ref.

D368 A0208

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 5 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 5xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 5 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 5 x D, R30 N

140° Form C

d2 (h6)

Item #

D326 0300 D326 0310 D326 0318 D326 0320 D326 0330 D326 0340 D326 0350 D326 0357 D326 0360 D326 0370 D326 0380 D326 0390 D326 0397 D326 0400 D326 0410 D326 0420 D326 0430 D326 0437 D326 0440 D326 0450 D326 0460 D326 0470 D326 0476 D326 0480 D326 0490 D326 0500 D326 0510 D326 0516

D327 0300 D327 0310 D327 0318 D327 0320 D327 0330 D327 0340 D327 0350 D327 0357 D327 0360 D327 0370 D327 0380 D327 0390 D327 0397 D327 0400 D327 0410 D327 0420 D327 0430 D327 0437 D327 0440 D327 0450 D327 0460 D327 0470 D327 0476 D327 0480 D327 0490 D327 0500 D327 0510 D327 0516

D328 0300 D328 0310 D328 0318 D328 0320 D328 0330 D328 0340 D328 0350 D328 0357 D328 0360 D328 0370 D328 0380 D328 0390 D328 0397 D328 0400 D328 0410 D328 0420 D328 0430 D328 0437 D328 0440 D328 0450 D328 0460 D328 0470 D328 0476 D328 0480 D328 0490 D328 0500 D328 0510 D328 0516

DIN Taps

140° Form C

Carbide Endmills

140° Form C

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

N R30

• • •

N R30

• • •

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D326 D327 D328

VHM AlCrN

ISO VDI 3323

VHM AlCrN

• • •

0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516

• • • • • • • • • • • • • • • • • • • • •

Size Ref.

D328 A0210

• • • • • • • • •

d1 (m7) mm inch 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.76 3/16 4.8 4.9 5.0 5.1 5.16 13/64

D327 A0210

HSS Endmills

Vc Page #: 477 

D326 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

ISO Taps

• Adecuado para materiales hasta 1400N/mm² • Núcleo Reforzado • Micro geometría y acondicionamiento de la superficie para un control óptimo de la viruta • AlCrN para una mayor vida útil de la herramienta

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 5 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 5xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 5 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 5 x D, R30 N

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

Reamers

R30

140° Form C

d2 (h6)

Item #

D326 0520 D326 0530 D326 0540 D326 0550 D326 0556 D326 0560 D326 0570 D326 0580 D326 0590 D326 0595 D326 0600 D326 0610 D326 0620 D326 0630 D326 0635 D326 0640 D326 0650 D326 0660 D326 0670 D326 0676 D326 0680 D326 0690 D326 0700 D326 0710 D326 0714 D326 0720 D326 0730 D326 0740

D327 0520 D327 0530 D327 0540 D327 0550 D327 0556 D327 0560 D327 0570 D327 0580 D327 0590 D327 0595 D327 0600 D327 0610 D327 0620 D327 0630 D327 0635 D327 0640 D327 0650 D327 0660 D327 0670 D327 0676 D327 0680 D327 0690 D327 0700 D327 0710 D327 0714 D327 0720 D327 0730 D327 0740

D328 0520 D328 0530 D328 0540 D328 0550 D328 0556 D328 0560 D328 0570 D328 0580 D328 0590 D328 0595 D328 0600 D328 0610 D328 0620 D328 0630 D328 0635 D328 0640 D328 0650 D328 0660 D328 0670 D328 0676 D328 0680 D328 0690 D328 0700 D328 0710 D328 0714 D328 0720 D328 0730 D328 0740

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

VHM AlCrN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

HSS Endmills

VHM AlCrN

• • •

Carbide Endmills

D326 D327 D328

VHM AlCrN

ISO VDI 3323

D328 A0210

• • •

DIN Taps

0520 0530 0540 0550 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740

• • • • • • • • • • • • • • • • • • • • •

Size Ref.

D327 A0210

• • •

d1 (m7) mm inch 5.2 5.3 5.4 5.5 5.56 7/32 5.6 5.7 5.8 5.9 5.95 15/64 6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.76 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4

D326 A0210

• • • • • • • • •

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 5 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 5xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 5 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 5 x D, R30 N

140° Form C

d2 (h6)

Item #

103

D326 0750 D326 0754 D326 0760 D326 0770 D326 0780 D326 0790 D326 0794 D326 0800 D326 0810 D326 0820 D326 0830 D326 0833 D326 0840 D326 0850 D326 0860 D326 0870 D326 0873 D326 0880 D326 0890 D326 0900 D326 0910 D326 0913 D326 0920 D326 0930 D326 0940 D326 0950 D326 0953 D326 0960

D327 0750 D327 0754 D327 0760 D327 0770 D327 0780 D327 0790 D327 0794 D327 0800 D327 0810 D327 0820 D327 0830 D327 0833 D327 0840 D327 0850 D327 0860 D327 0870 D327 0873 D327 0880 D327 0890 D327 0900 D327 0910 D327 0913 D327 0920 D327 0930 D327 0940 D327 0950 D327 0953 D327 0960

D328 0750 D328 0754 D328 0760 D328 0770 D328 0780 D328 0790 D328 0794 D328 0800 D328 0810 D328 0820 D328 0830 D328 0833 D328 0840 D328 0850 D328 0860 D328 0870 D328 0873 D328 0880 D328 0890 D328 0900 D328 0910 D328 0913 D328 0920 D328 0930 D328 0940 D328 0950 D328 0953 D328 0960

DIN Taps

140° Form C

Carbide Endmills

140° Form C

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

N R30

• • •

N R30

• • •

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D326 D327 D328

VHM AlCrN

ISO VDI 3323

VHM AlCrN

• • •

0750 0754 0760 0770 0780 0790 0794 0800 0810 0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0960

• • • • • • • • • • • • • • • • • • • • •

Size Ref.

D328 A0210

• • • • • • • • •

d1 (m7) mm inch 7.5 7.54 19/64 7.6 7.7 7.8 7.9 7.94 5/16 8.0 8.1 8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.6

D327 A0210

HSS Endmills

Vc Page #: 477 

D326 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 5 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 5xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 5 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 5 x D, R30 N

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

N R30

140° Form C

d2 (h6)

Item #

103

118

D326 0970 D326 0980 D326 0990 D326 0992 D326 1000 D326 1010 D326 1020 D326 1030 D326 1032 D326 1040 D326 1050 D326 1060 D326 1070 D326 1080 D326 1090 D326 1100 D326 1110 D326 1111 D326 1120 D326 1130 D326 1140 D326 1150 D326 1160 D326 1170 D326 1180 D326 1190 D326 1191 D326 1200

D327 0970 D327 0980 D327 0990 D327 0992 D327 1000 D327 1010 D327 1020 D327 1030 D327 1032 D327 1040 D327 1050 D327 1060 D327 1070 D327 1080 D327 1090 D327 1100 D327 1110 D327 1111 D327 1120 D327 1130 D327 1140 D327 1150 D327 1160 D327 1170 D327 1180 D327 1190 D327 1191 D327 1200

D328 0970 D328 0980 D328 0990 D328 0992 D328 1000 D328 1010 D328 1020 D328 1030 D328 1032 D328 1040 D328 1050 D328 1060 D328 1070 D328 1080 D328 1090 D328 1100 D328 1110 D328 1111 D328 1120 D328 1130 D328 1140 D328 1150 D328 1160 D328 1170 D328 1180 D328 1190 D328 1191 D328 1200

M 8

N R30

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

N R30

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

VHM AlCrN

• • •

Reamers

VHM AlCrN

• • •

HSS Endmills

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • •

Carbide Endmills

D326 D327 D328

D328 A0210

ISO VDI 3323

D327 A0210

103

• • •

DIN Taps

D326 A0210

• • • • • • • • •

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 5 x D, R30 N

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Forets carbure 5xD, hélice 30°, type N

HSS Drills

Punte Metallo Duro, 5 x D, R30 N

• Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN per massimizzare la vita utensile

Brocas de Metal Duro, 5 x D, R30 N

124

133

143

153

101

153

101

153

101

153

101

153

101

153

101

M 8

R30

140° Form C

Item #

D326 1250 D326 1269 D326 1280 D326 1300 D326 1349 D326 1350 D326 1380 D326 1400 D326 1429 D326 1450 D326 1480 D326 1500 D326 1550 D326 1580 D326 1588 D326 1600 D326 1650 D326 1680 D326 1700 D326 1746 D326 1750 D326 1780 D326 1800 D326 1850 D326 1900 D326 1905 D326 1950 • D326 2000

D327 1250 D327 1269 D327 1280 D327 1300 D327 1349 D327 1350 • D327 1400 D327 1429 D327 1450 D327 1480 D327 1500 D327 1550 D327 1580 D327 1588 D327 1600 D327 1650 D327 1680 D327 1700 D327 1746 D327 1750 D327 1780 D327 1800 D327 1850 D327 1900 D327 1905 D327 1950 • D327 2000

D328 1250 D328 1269 D328 1280 D328 1300 D328 1349 D328 1350 • D328 1400 D328 1429 D328 1450 D328 1480 D328 1500 D328 1550 D328 1580 D328 1588 D328 1600 D328 1650 D328 1680 D328 1700 D328 1746 D328 1750 D328 1780 D328 1800 D328 1850 D328 1900 D328 1905 D328 1950 • D328 2000

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

N R30

• • •

VHM AlCrN

• • •

• • • • • • • • • • • • • • • • • • • • •

• • •

VHM AlCrN

DIN Taps

VHM AlCrN

Carbide Endmills

d2 (h6)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D326 D327 D328

l2 77

ISO VDI 3323

l1 124

D328 A0210

• • • • • • • • •

d1 (m7) Size Ref. mm inch 1250 12.5 1269 12.70 1/2 1280 12.8 1300 13.0 1349 13.49 17/32 1350 13.5 1380 13.8 1400 14.0 1429 14.29 9/16 1450 14.5 1480 14.8 1500 15.0 1550 15.5 1580 15.8 1588 15.88 5/8 1600 16.0 1650 16.5 1680 16.8 1700 17.0 1746 17.46 11/16 1750 17.5 1780 17.8 1800 18.0 1850 18.5 1900 19.0 1905 19.05 3/4 1950 19.5 1980 19.8 2000 20.0

D327 A0210

HSS Endmills

Vc Page #: 477 

D326 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

ISO Taps

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 5 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 5 x D, R30 N, IK

Forets carbure 5xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, Refrigerazione Interna • Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato con fori di Lubrificazione interna • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN Per massimizzare la vita utensile

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

Carbide Endmills HSS Endmills Reamers

VHM AlCrN

R30 - IK

140° Form C

d2 (h6)

Item #

D332 0300 D332 0310 D332 0318 D332 0320 D332 0330 D332 0340 D332 0350 D332 0357 D332 0360 D332 0370 D332 0380 D332 0390 D332 0397 D332 0400 D332 0410 D332 0420 D332 0430 D332 0437 D332 0440 D332 0450 D332 0460 D332 0470 D332 0476 D332 0480 D332 0490 D332 0500 D332 0510 D332 0516

D333 0300 D333 0310 D333 0318 D333 0320 D333 0330 D333 0340 D333 0350 D333 0357 D333 0360 D333 0370 D333 0380 D333 0390 D333 0397 D333 0400 D333 0410 D333 0420 D333 0430 D333 0437 D333 0440 D333 0450 D333 0460 D333 0470 D333 0476 D333 0480 D333 0490 D333 0500 D333 0510 D333 0516

D334 0300 D334 0310 D334 0318 D334 0320 D334 0330 D334 0340 D334 0350 D334 0357 D334 0360 D334 0370 D334 0380 D334 0390 D334 0397 D334 0400 D334 0410 D334 0420 D334 0430 D334 0437 D334 0440 D334 0450 D334 0460 D334 0470 D334 0476 D334 0480 D334 0490 D334 0500 D334 0510 D334 0516

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

D332 D333 D334

VHM AlCrN

ISO VDI 3323

D334 A0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

DIN Taps

0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516

D333 A0210

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • • • •

d1 (m7) mm inch 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.76 3/16 4.8 4.9 5.0 5.1 5.16 13/64

D332 A0210

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 5 x D, R30 N, IK • Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Carbide Drills

Brocas de Metal Duro, 5 x D, R30 N, IK

Forets carbure 5xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, Refrigerazione Interna

ISO Taps

N R30 - IK

140° Form C

d2 (h6)

Item #

D333 0520 D333 0530 D333 0540 D333 0550

D332 0520 D332 0530 D332 0540 D332 0550 D332 0556 D332 0560 D332 0570 D332 0580 D332 0590 D332 0595 D332 0600 D332 0610 D332 0620 D332 0630 D332 0635 D332 0640 D332 0650 D332 0660 D332 0670 D332 0676 D332 0680 D332 0690 D332 0700 D332 0710 D332 0714 D332 0720 D332 0730 D332 0740

D334 0520 D334 0530 D334 0540 D334 0550 D334 0556 D334 0560 D334 0570 D334 0580 D334 0590 D334 0595 D334 0600 D334 0610 D334 0620 D334 0630 D334 0635 D334 0640 D334 0650 D334 0660 D334 0670 D334 0676 D334 0680 D334 0690 D334 0700 D334 0710 D334 0714 D334 0720 D334 0730 D334 0740

D333 0560 D333 0570 D333 0580 D333 0590 D333 0595 D333 0600 D333 0610 D333 0620 D333 0630 D333 0635 D333 0640 D333 0650 D333 0660 D333 0670 D333 0676 D333 0680 D333 0690 D333 0700 D333 0710 D333 0714 D333 0720 D333 0730 D333 0740 S

DIN Taps

N R30 - IK

Carbide Endmills

N R30 - IK

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

D332 D333 D334

VHM AlCrN

ISO VDI 3323

VHM AlCrN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

0520 0530 0540 0550 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740

D334 A0210

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • • • •

d1 (m7) mm inch 5.2 5.3 5.4 5.5 5.56 7/32 5.6 5.7 5.8 5.9 5.95 15/64 6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.76 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4

D333 A0210

HSS Endmills

Vc Page #: 477 

D332 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 5 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 5 x D, R30 N, IK

Forets carbure 5xD, hélice 30°, type N, arrosage central

HSS Drills

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

Carbide Endmills HSS Endmills Reamers

VHM AlCrN

R30 - IK

140° Form C

d2 (h6)

Item #

103

D332 0750 D332 0754 D332 0760 D332 0770 D332 0780 D332 0790 D332 0794 D332 0800 D332 0810 D332 0820 D332 0830 D332 0833 D332 0840 D332 0850 D332 0860 D332 0870 D332 0873 D332 0880 D332 0890 D332 0900 D332 0910 D332 0913 D332 0920 D332 0930 D332 0940 D332 0950 D332 0953 D332 0960

D333 0750 D333 0754 D333 0760 D333 0770 D333 0780 D333 0790 D333 0794 D333 0800 D333 0810 D333 0820 D333 0830 D333 0833 D333 0840 D333 0850 D333 0860 D333 0870 D333 0873 D333 0880 D333 0890 D333 0900 D333 0910 D333 0913 D333 0920 D333 0930 D333 0940 D333 0950 D333 0953 D333 0960

D334 0750 D334 0754 D334 0760 D334 0770 D334 0780 D334 0790 D334 0794 D334 0800 D334 0810 D334 0820 D334 0830 D334 0833 D334 0840 D334 0850 D334 0860 D334 0870 D334 0873 D334 0880 D334 0890 D334 0900 D334 0910 D334 0913 D334 0920 D334 0930 D334 0940 D334 0950 D334 0953 D334 0960

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

D332 D333 D334

VHM AlCrN

ISO VDI 3323

D334 A0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

DIN Taps

0750 0754 0760 0770 0780 0790 0794 0800 0810 0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0960

D333 A0210

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • • • •

d1 (m7) mm inch 7.5 7.54 19/64 7.6 7.7 7.8 7.9 7.94 5/16 8.0 8.1 8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.6

D332 A0210

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Brocas de Metal Duro, 5 x D, R30 N, IK

Forets carbure 5xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, Refrigerazione Interna

ISO Taps

103

118

124

M 8

VHM AlCrN

R30 - IK

140° Form C

Item #

D332 0970 D332 0980 D332 0990 D332 0992 D332 1000 D332 1010 D332 1020 D332 1030 D332 1032 D332 1040 D332 1050 D332 1060 D332 1070 D332 1080 D332 1090 D332 1100 D332 1110 D332 1111 D332 1120 D332 1130 D332 1140 D332 1150 D332 1160 D332 1170 D332 1180 D332 1190 D332 1191 D332 1200 D332 1250 D332 1269

D333 0970 D333 0980 D333 0990 D333 0992 D333 1000 D333 1010 D333 1020 D333 1030 D333 1032 D333 1040 D333 1050 D333 1060 D333 1070 D333 1080 D333 1090 D333 1100 D333 1110 D333 1111 D333 1120 D333 1130 D333 1140 D333 1150 D333 1160 D333 1170 D333 1180 D333 1190 D333 1191 D333 1200 D333 1250 D333 1269

D334 0970 D334 0980 D334 0990 D334 0992 D334 1000 D334 1010 D334 1020 D334 1030 D334 1032 D334 1040 D334 1050 D334 1060 D334 1070 D334 1080 D334 1090 D334 1100 D334 1110 D334 1111 D334 1120 D334 1130 D334 1140 D334 1150 D334 1160 D334 1170 D334 1180 D334 1190 D334 1191 D334 1200 D334 1250 D334 1269

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

VHM AlCrN

DIN Taps

D334 A0210

Carbide Endmills

d2 (h6)

D332 D333 D334

l2 61

ISO VDI 3323

l1 103

• • • • • • • • • • • •

D333 A0210

HSS Endmills

Vc Page #: 477 

D332 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 5 8 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 5 x D, R30 N, IK

Forets carbure 5xD, hélice 30°, type N, arrosage central

HSS Drills

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

Reamers

R30 - IK

140° Form C

d2 (h6)

Item #

124

133

143

153

101

153

101

153

101

153

101

153

101

153

101

D332 1280 D332 1300 D332 1349 D332 1350 • D332 1400 D332 1429 D332 1450 • D332 1500 D332 1550 • D332 1588 D332 1600 D332 1650 • D332 1700 D332 1746 D332 1750 • D332 1800 D332 1850 D332 1900 D332 1905 D332 1950 • D332 2000

D333 1280 D333 1300 D333 1349 D333 1350 • D333 1400 D333 1429 D333 1450 • D333 1500 D333 1550 • D333 1588 D333 1600 D333 1650 • D333 1700 D333 1746 D333 1750 • D333 1800 D333 1850 D333 1900 D333 1905 D333 1950 • D333 2000

D334 1280 D334 1300 D334 1349 D334 1350 • D334 1400 D334 1429 D334 1450 • D334 1500 D334 1550 • D334 1588 D334 1600 D334 1650 • D334 1700 D334 1746 D334 1750 • D334 1800 D334 1850 D334 1900 D334 1905 D334 1950 • D334 2000

M 8

VHM AlCrN

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

VHM AlCrN

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

HSS Endmills

VHM AlCrN

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Carbide Endmills

D332 D333 D334

D334 A0210

ISO VDI 3323

D333 A0210

124

• • • • • • • • • • • •

DIN Taps

d1 (m7) Size Ref. mm inch 1280 12.8 1300 13.0 1349 13.49 17/32 1350 13.5 1380 13.8 1400 14.0 1429 14.29 9/16 1450 14.5 1480 14.8 1500 15.0 1550 15.5 1580 15.8 1588 15.88 5/8 1600 16.0 1650 16.5 1680 16.8 1700 17.0 1746 17.46 11/16 1750 17.5 1780 17.8 1800 18.0 1850 18.5 1900 19.0 1905 19.05 3/4 1950 19.5 1980 19.8 2000 20.0

D332 A0210

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, 8 x D, R30 N, IK • Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Carbide Drills

Brocas de Metal Duro, 8 x D, R30 N, IK

Forets carbure 8xD, hélice 30°, type N, arrosage central

HSS Drills

• Convient aux materiaux jusqu’à 1400 N/mm² • Noyau renforcé et arrosage central • Micro géométrie et traitement surface optimisé pour un bon controle des copeaux • Revêtement AlCrN pour une durée de vie maximum

Punte Metallo Duro, 8 x D, R30 N, Refrigerazione Interna

ISO Taps

d2 (h6) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

M 8

VHM AlCrN

R30 - IK

140° Form C

Item #

D335 0300 D335 0310 D335 0318 D335 0320 D335 0330 D335 0340 D335 0350 D335 0357 D335 0360 D335 0370 D335 0380 D335 0390 D335 0397 D335 0400 D335 0410 D335 0420 D335 0430 D335 0437 D335 0440 D335 0450 D335 0460 D335 0470 D335 0476 D335 0480 D335 0490 D335 0500 D335 0510 D335 0516 D335 0520 D335 0530

D336 0300 D336 0310 D336 0318 D336 0320 D336 0330 D336 0340 D336 0350 D336 0357 D336 0360 D336 0370 D336 0380 D336 0390 D336 0397 D336 0400 D336 0410 D336 0420 D336 0430 D336 0437 D336 0440 D336 0450 D336 0460 D336 0470 D336 0476 D336 0480 D336 0490 D336 0500 D336 0510 D336 0516 D336 0520 D336 0530

D337 0300 D337 0310 D337 0318 D337 0320 D337 0330 D337 0340 D337 0350 D337 0357 D337 0360 D337 0370 D337 0380 D337 0390 D337 0397 D337 0400 D337 0410 D337 0420 D337 0430 D337 0437 D337 0440 D337 0450 D337 0460 D337 0470 D337 0476 D337 0480 D337 0490 D337 0500 D337 0510 D337 0516 D337 0520 D337 0530

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D335 D336 D337

l2 34 34 34 34 34 34 34 34 34 34 43 43 43 43 43 43 43 43 43 43 43 43 57 57 57 57 57 57 57 57

ISO VDI 3323

l1 72 72 72 72 72 72 72 72 72 72 81 81 81 81 81 81 81 81 81 81 81 81 95 95 95 95 95 95 95 95

VHM AlCrN

DIN Taps

0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516 0520 0530

VHM AlCrN

Carbide Endmills

Size Ref.

D337 A0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • • • •

d1 (m7) mm inch 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.76 3/16 4.8 4.9 5.0 5.1 5.16 13/64 5.2 5.3

D336 A0210

HSS Endmills

Vc Page #: 477 

D335 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 8 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 8 x D, R30 N, IK

Forets carbure 8xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 8 x D, R30 N, Refrigerazione Interna • Ideale per materiali fino a 1400N/mm² • Nocciolo rinforzato con fori di Lubrificazione interna • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • AlCrN Per massimizzare la vita utensile

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477  Size Ref.

Carbide Endmills HSS Endmills Reamers

d2 (h6) 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

114

M 8

D337 A0210

VHM

AlCrN

R30 - IK

140° Form C

Item #

D335 0540 D335 0550 D335 0556 D335 0560 D335 0570 D335 0580 D335 0590 D335 0595 D335 0600 D335 0610 D335 0620 D335 0630 D335 0635 D335 0640 D335 0650 D335 0660 D335 0670 D335 0676 D335 0680 D335 0690 D335 0700 D335 0710 D335 0714 D335 0720 D335 0730 D335 0740 D335 0750 D335 0754 D335 0760 D335 0770

D336 0540 D336 0550 D336 0556 D336 0560 D336 0570 D336 0580 D336 0590 D336 0595 D336 0600 D336 0610 D336 0620 D336 0630 D336 0635 D336 0640 D336 0650 D336 0660 D336 0670 D336 0676 D336 0680 D336 0690 D336 0700 D336 0710 D336 0714 D336 0720 D336 0730 D336 0740 D336 0750 D336 0754 D336 0760 D336 0770

D337 0540 D337 0550 D337 0556 D337 0560 D337 0570 D337 0580 D337 0590 D337 0595 D337 0600 D337 0610 D337 0620 D337 0630 D337 0635 D337 0640 D337 0650 D337 0660 D337 0670 D337 0676 D337 0680 D337 0690 D337 0700 D337 0710 D337 0714 D337 0720 D337 0730 D337 0740 D337 0750 D337 0754 D337 0760 D337 0770

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

D335 D336 D337

l2 57 57 57 57 57 57 57 57 57 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76

ISO VDI 3323

l1 95 95 95 95 95 95 95 95 95 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114

• • • • • •

DIN Taps

0540 0550 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740 0750 0754 0760 0770

D336 A0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • • • •

d1 (m7) mm inch 5.4 5.5 5.56 7/32 5.6 5.7 5.8 5.9 5.95 15/64 6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.76 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4 7.5 7.54 19/64 7.6 7.7

D335 A0210

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Brocas de Metal Duro, 8 x D, R30 N, IK

Forets carbure 8xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 8 x D, R30 N, Refrigerazione Interna

ISO Taps

d2 (h6) 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12

M 8

VHM AlCrN

R30 - IK

140° Form C

Item #

D335 0780 D335 0790 D335 0794 D335 0800 D335 0810 D335 0820 D335 0830 D335 0833 D335 0840 D335 0850 D335 0860 D335 0870 D335 0873 D335 0880 D335 0890 D335 0900 D335 0910 D335 0913 D335 0920 D335 0930 D335 0940 D335 0950 D335 0953 D335 0960 D335 0970 D335 0980 D335 0990 D335 0992 D335 1000 D335 1010

D336 0780 D336 0790 D336 0794 D336 0800 D336 0810 D336 0820 D336 0830 D336 0833 D336 0840 D336 0850 D336 0860 D336 0870 D336 0873 D336 0880 D336 0890 D336 0900 D336 0910 D336 0913 D336 0920 D336 0930 D336 0940 D336 0950 D336 0953 D336 0960 D336 0970 D336 0980 D336 0990 D336 0992 D336 1000 D336 1010

D337 0780 D337 0790 D337 0794 D337 0800 D337 0810 D337 0820 D337 0830 D337 0833 D337 0840 D337 0850 D337 0860 D337 0870 D337 0873 D337 0880 D337 0890 D337 0900 D337 0910 D337 0913 D337 0920 D337 0930 D337 0940 D337 0950 D337 0953 D337 0960 D337 0970 D337 0980 D337 0990 D337 0992 D337 1000 D337 1010

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D335 D336 D337

l2 76 76 76 76 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 114

ISO VDI 3323

l1 114 114 114 114 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 162

VHM AlCrN

DIN Taps

0780 0790 0794 0800 0810 0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0960 0970 0980 0990 0992 1000 1010

VHM AlCrN

Carbide Endmills

Size Ref.

D337 A0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • • • •

d1 (m7) mm inch 7.8 7.9 7.94 5/16 8.0 8.1 8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.6 9.7 9.8 9.9 9.92 25/64 10.0 10.1

D336 A0210

HSS Endmills

Vc Page #: 477 

D335 A0210

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

Tech Info

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents Carbide Drills

• Suitable for materials up to 1400N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • AlCrN for maximum tool life

Brocas de Metal Duro, 8 x D, R30 N, IK

Forets carbure 8xD, hélice 30°, type N, arrosage central

HSS Drills

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

DIN Taps

d1 (m7) Size Ref. mm inch 1020 10.2 1030 10.3 1032 10.32 13/32 1040 10.4 1050 10.5 1060 10.6 1070 10.7 1080 10.8 1090 10.9 1100 11.0 1110 11.1 1111 11.11 7/16 1120 11.2 1130 11.3 1140 11.4 1150 11.5 1160 11.6 1170 11.7 1180 11.8 1190 11.9 1191 11.91 15/32 1200 12.0

Carbide Endmills HSS Endmills

d2 (h6)

162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162

114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

D335

D336

D337

A0210

VHM

AlCrN

R30 - IK

140° Form C

Item #

D335 1020 D335 1030 D335 1032 D335 1040 D335 1050 D335 1060 D335 1070 D335 1080 D335 1090 D335 1100 D335 1110 D335 1111 D335 1120 D335 1130 D335 1140 D335 1150 D335 1160 D335 1170 D335 1180 D335 1190 D335 1191 D335 1200

D336 1020 D336 1030 D336 1032 D336 1040 D336 1050 D336 1060 D336 1070 D336 1080 D336 1090 D336 1100 D336 1110 D336 1111 D336 1120 D336 1130 D336 1140 D336 1150 D336 1160 D336 1170 D336 1180 D336 1190 D336 1191 D336 1200

D337 1020 D337 1030 D337 1032 D337 1040 D337 1050 D337 1060 D337 1070 D337 1080 D337 1090 D337 1100 D337 1110 D337 1111 D337 1120 D337 1130 D337 1140 D337 1150 D337 1160 D337 1170 D337 1180 D337 1190 D337 1191 D337 1200

Reamers P

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • • • •

• • • • • •

D335 D336 D337

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Drills Carbide 5 x D, R30 VA Black Magic watch the video

Forets carbure 5xD hélice 30°, VA Blagic Magic, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 5 x D, R30 VA Black Magic

ISO Taps

M 8

140° 4 Facet Form C

Item #

D358 0300 D358 0310 D358 0318 D358 0320 D358 0330 D358 0340 D358 0350 D358 0357 D358 0360 D358 0370 D358 0380 D358 0390 D358 0397 D358 0400 D358 0410 D358 0420 D358 0430 D358 0437 D358 0440 D358 0450 D358 0460 D358 0470 D358 0476 D358 0480 D358 0490 D358 0500 D358 0510 D358 0516 D358 0520 D358 0530

D359 0300 D359 0310 D359 0318 D359 0320 D359 0330 D359 0340 D359 0350 D359 0357 D359 0360 D359 0370 D359 0380 D359 0390 D359 0397 D359 0400 D359 0410 D359 0420 D359 0430 D359 0437 D359 0440 D359 0450 D359 0460 D359 0470 D359 0476 D359 0480 D359 0490 D359 0500 D359 0510 D359 0516 D359 0520 D359 0530

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • •

VA R30 - IK

DIN Taps

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

VA R30 - IK

Carbide Endmills

d2 (h6)

• •

• • • • • • • • • • • • • • • •

D358 D359

l2 28 28 28 28 28 28 28 28 28 28 36 36 36 36 36 36 36 36 36 36 36 36 44 44 44 44 44 44 44 44

ISO VDI 3323

l1 66 66 66 66 66 66 66 66 66 66 74 74 74 74 74 74 74 74 74 74 74 74 82 82 82 82 82 82 82 82

VHM HELICA

HSS Endmills

0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516 0520 0530

VHM HELICA

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • •

d1 (m7) mm inch 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.76 3/16 4.8 4.9 5.0 5.1 5.16 13/64 5.2 5.3

D359 A0210

Reamers

Vc Page #: 477 

D358 A0210

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide 5 x D, R30 VA Black Magic

Carbide Drills

watch the video

Forets carbure 5xD hélice 30°, VA Blagic Magic, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 5 x D, R30 VA Black Magic

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

HSS Endmills Reamers

d2 (h6) 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

M 8

• • • • • • • • • • • • • • • •

Tech Info

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

VHM

HELICA

R30 - IK

140° 4 Facet Form C

Item #

D358 0540 D358 0550 D358 0556 D358 0560 D358 0570 D358 0580 D358 0590 D358 0595 D358 0600 D358 0610 D358 0620 D358 0630 D358 0635 D358 0640 D358 0650 D358 0660 D358 0670 D358 0676 D358 0680 D358 0690 D358 0700 D358 0710 D358 0714 D358 0720 D358 0730 D358 0740 D358 0750 D358 0754 D358 0760 D358 0770

D359 0540 D359 0550 D359 0556 D359 0560 D359 0570 D359 0580 D359 0590 D359 0595 D359 0600 D359 0610 D359 0620 D359 0630 D359 0635 D359 0640 D359 0650 D359 0660 D359 0670 D359 0676 D359 0680 D359 0690 D359 0700 D359 0710 D359 0714 D359 0720 D359 0730 D359 0740 D359 0750 D359 0754 D359 0760 D359 0770

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • •

Carbide Endmills

D358 D359

l2 44 44 44 44 44 44 44 44 44 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53

ISO VDI 3323

l1 82 82 82 82 82 82 82 82 82 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91

• •

DIN Taps

0540 0550 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740 0750 0754 0760 0770

D359 A0210

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • •

d1 (m7) mm inch 5.4 5.5 5.56 7/32 5.6 5.7 5.8 5.9 5.95 15/64 6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.76 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4 7.5 7.54 19/64 7.6 7.7

D358 A0210

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Drills Carbide 5 x D, R30 VA Black Magic watch the video

Forets carbure 5xD hélice 30°, VA Blagic Magic, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 5 x D, R30 VA Black Magic

ISO Taps

M 8

140° 4 Facet Form C

Item #

D358 0780 D358 0790 D358 0794 D358 0800 D358 0810 D358 0820 D358 0830 D358 0833 D358 0840 D358 0850 D358 0860 D358 0870 D358 0873 D358 0880 D358 0890 D358 0900 D358 0910 D358 0913 D358 0920 D358 0930 D358 0940 D358 0950 D358 0953 D358 0960 D358 0970 D358 0980 D358 0990 D358 0992 D358 1000 D358 1010

D359 0780 D359 0790 D359 0794 D359 0800 D359 0810 D359 0820 D359 0830 D359 0833 D359 0840 D359 0850 D359 0860 D359 0870 D359 0873 D359 0880 D359 0890 D359 0900 D359 0910 D359 0913 D359 0920 D359 0930 D359 0940 D359 0950 D359 0953 D359 0960 D359 0970 D359 0980 D359 0990 D359 0992 D359 1000 D359 1010

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • •

• •

VA R30 - IK

DIN Taps

8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12

VA R30 - IK

Carbide Endmills

d2 (h6)

• • • • • • • • • • • • • • • •

D358 D359

l2 53 53 53 53 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 71

ISO VDI 3323

l1 91 91 91 91 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 118

VHM HELICA

HSS Endmills

0780 0790 0794 0800 0810 0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0960 0970 0980 0990 0992 1000 1010

VHM HELICA

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Size Ref.

• • • • • • • • • •

d1 (m7) mm inch 7.8 7.9 7.94 5/16 8.0 8.1 8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.6 9.7 9.8 9.9 9.92 25/64 10.0 10.1

D359 A0210

Reamers

Vc Page #: 477 

D358 A0210

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide 5 x D, R30 VA Black Magic

Carbide Drills

watch the video

Forets carbure 5xD hélice 30°, VA Blagic Magic, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 5 x D, R30 VA Black Magic

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Vc Page #: 477 

M 8

• • • • • • • • • • • • • • • •

Tech Info

VHM

HELICA

R30 - IK

140° 4 Facet Form C

Item #

D358 1020 D358 1030 D358 1032 D358 1040 D358 1050 D358 1060 D358 1070 D358 1072 D358 1080 D358 1090 D358 1100 D358 1110 D358 1111 D358 1120 D358 1130 D358 1140 D358 1150 D358 1151 D358 1160 D358 1170 D358 1180 D358 1190 D358 1191 D358 1200 D358 1231 D358 1250 D358 1269 D358 1280 D358 1300 D358 1310

D359 1020 D359 1030 D359 1032 D359 1040 D359 1050 D359 1060 D359 1070 D359 1072 D359 1080 D359 1090 D359 1100 D359 1110 D359 1111 D359 1120 D359 1130 D359 1140 D359 1150 D359 1151 D359 1160 D359 1170 D359 1180 D359 1190 D359 1191 D359 1200 D359 1231 D359 1250 D359 1269 D359 1280 D359 1300 D359 1310

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

D359 A0210

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

Reamers

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 14 14 14 14 14 14

• • • • • • • • • •

HSS Endmills

d2 (h6)

• • • • • • • • • •

Carbide Endmills

D358 D359

l2 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 77 77 77 77 77 77

ISO VDI 3323

l1 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 124 124 124 124 124 124

• •

DIN Taps

d1 (m7) Size Ref. mm inch 1020 10.2 1030 10.3 1032 10.32 13/32 1040 10.4 1050 10.5 1060 10.6 1070 10.7 1072 10.72 27/64 1080 10.8 1090 10.9 1100 11.0 1110 11.1 1111 11.11 7/16 1120 11.2 1130 11.3 1140 11.4 1150 11.5 1151 11.51 29/64 1160 11.6 1170 11.7 1180 11.8 1190 11.9 1191 11.91 15/32 1200 12.0 1231 12.30 31/64 1250 12.5 1269 12.70 1/2 1280 12.8 1300 13.0 1310 13.10 33/64

D358 A0210

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Drills Carbide 5 x D, R30 VA Black Magic watch the video

Forets carbure 5xD hélice 30°, VA Blagic Magic, arrosage central

HSS Drills

Punte Metallo Duro, 5 x D, R30 N, VA Black Magic

Brocas de Metal Duro, 5 x D, R30 VA Black Magic

ISO Taps

Item #

D358 1349 D358 1350 D358 1389 D358 1400 D358 1429 D358 1450 D358 1468 D358 1500 D358 1508 D358 1548 D358 1550 D358 1588 D358 1600 D358 1650 D358 1667 D358 1700 D358 1746 D358 1750 D358 1800 D358 1826 D358 1850 D358 1900 D358 1905 D358 1950 D358 2000

D359 1349 D359 1350 D359 1389 D359 1400 D359 1429 D359 1450 D359 1468 D359 1500 D359 1508 D359 1548 D359 1550 D359 1588 D359 1600 D359 1650 D359 1667 D359 1700 D359 1746 D359 1750 D359 1800 D359 1826 D359 1850 D359 1900 D359 1905 D359 1950 D359 2000

M 8

DIN Taps

Item #

14 14 14 14 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 20 20 20 20 20 20

Carbide Endmills

HSS Endmills

140° 4 Facet Form C

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • •

140° 4 Facet Form C

d2 (h6)

• • • • • • • • • •

VA R30 - IK

• •

VA R30 - IK

77 77 77 77 83 83 83 83 83 83 83 83 83 93 93 93 93 93 93 101 101 101 101 101 101

• • • • • • • • • • • • • • • •

D358 D359

VHM HELICA

ISO VDI 3323

VHM HELICA

124 124 124 124 133 133 133 133 133 133 133 133 133 143 143 143 143 143 143 153 153 153 153 153 153

• • • • • • • • • •

d1 (m7) Size Ref. mm inch 1349 13.49 17/32 1350 13.5 1389 13.89 35/64 1400 14.0 1429 14.29 9/16 1450 14.5 1468 14.68 37/64 1500 15.0 1508 15.08 19/32 1548 15.48 39/64 1550 15.5 1588 15.88 5/8 1600 16.0 1650 16.5 1667 16.67 21/32 1700 17.0 1746 17.46 11/16 1750 17.5 1800 18.0 1826 18.26 23/32 1850 18.5 1900 19.0 1905 19.05 3/4 1950 19.5 2000 20.0

D359 A0210

Reamers

Vc Page #: 477 

D358 A0210

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form (DIN 6535)

Tool Holding

• Optimal • Effective NOTE: HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, 12 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1200N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • Pertura for maximum tool life

Forets carbure 12xD, hélice 30°, type N, arrosage central

• Convient aux materiaux jusqu'à 1200 N/mm², les Inox et les fontes • Noyau renforcé et arrosage central • Micro géométrie et traitement surface optimisé pour un bon controle des copeaux • Revêtement Pertura pour une durée de vie maximum

HSS Drills

Punte Metallo Duro, 12 x D, R30 N, Refrigerazione Interna

• Ideale per materiali fino a 1200N/mm² • Nocciolo rinforzato con fori di Lubrificazione interna • Micro geometria & rivestimento tagliente ideale per un ottimo controllo truciolo • Pertura Per massimizzare la vita utensile

Brocas de Metal Duro, 12 x D, R30 N, IK

ISO Taps

• Adecuado para materiales hasta 1200N/mm² • Núcleo Reforzado con refrigeración interior • Micro geometría y acondicionamiento de la superficie para un control óptimo de la viruta • Pertura para una mayor vida útil de la herramienta

4 3

Tool Holding

D371 Catalogue Code A0210 Discount Group VHM Material Pertura Tip Surface Finish Sutton Designation Up to 1200N/mm2 R30 - IK Geometry 135° Form C Point Type HA Shank Form (DIN 6535)

Vc Page #: 477  d1 (h7) mm inch 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7

Size Ref.

DIN Taps Carbide Endmills

0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570

HSS Endmills Reamers

d2 (h6)

Max drill depth 46

102

116

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

Item # D371 0300 D371 0310 D371 0320 D371 0330 D371 0340 D371 0350 D371 0360 D371 0370 D371 0380 D371 0390 D371 0400 D371 0410 D371 0420 D371 0430 D371 0440 D371 0450 D371 0460 D371 0470 D371 0480 D371 0490 D371 0500 D371 0510 D371 0520 D371 0530 D371 0540 D371 0550 D371 0560 D371 0570

• • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

D371

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Drills Carbide, 12 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1200N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • Pertura for maximum tool life

Forets carbure 12xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 12 x D, R30 N, Refrigerazione Interna

Brocas de Metal Duro, 12 x D, R30 N, IK

ISO Taps

4 3

Vc Page #: 477 

116

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

146

108

162

120

108

162

120

108

162

120

108

162

120

107

162

120

107

M 8

Item #

DIN Taps

D371 0580 D371 0590 D371 0600 D371 0610 D371 0620 D371 0630 D371 0640 D371 0650 D371 0660 D371 0670 D371 0680 D371 0690 D371 0700 D371 0710 D371 0720 D371 0730 D371 0740 D371 0750 D371 0760 D371 0770 D371 0780 D371 0790 D371 0800 D371 0810 D371 0820 D371 0830 D371 0840 D371 0850 N

Carbide Endmills

HSS Endmills

116

Max drill depth 69

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • •

D371

d2 (h6)

ISO VDI 3323

Reamers

0580 0590 0600 0610 0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850

Tech Info

d1 (h7) mm inch 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5

Size Ref.

Tool Holding

D371 Catalogue Code A0210 Discount Group VHM Material Pertura Tip Surface Finish Sutton Designation Up to 1200N/mm2 R30 - IK Geometry 135° Form C Point Type HA Shank Form (DIN 6535)

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Back to index Contents

Drills Carbide, 12 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1200N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • Pertura for maximum tool life

Forets carbure 12xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 12 x D, R30 N, Refrigerazione Interna

Brocas de Metal Duro, 12 x D, R30 N, IK

ISO Taps

4 3

Tool Holding

D371 Catalogue Code A0210 Discount Group VHM Material Pertura Tip Surface Finish Sutton Designation Up to 1200N/mm2 R30 - IK Geometry 135° Form C Point Type HA Shank Form (DIN 6535)

Vc Page #: 477  d1 (h7) mm inch 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3

Size Ref.

DIN Taps Carbide Endmills

0860 0870 0880 0890 0900 0910 0920 0930 0940 0950 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130

HSS Endmills Reamers

d2 (h6)

162

120

Max drill depth 107

162

120

107

162

120

107

162

120

107

162

120

107

162

120

106

162

120

106

162

120

106

162

120

106

162

120

106

162

120

106

162

120

105

162

120

105

162

120

105

162

120

105

204

156

141

204

156

141

204

156

141

204

156

140

204

156

140

204

156

140

204

156

140

204

156

140

204

156

140

204

156

139

204

156

139

204

156

139

204

156

139

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

Item # D371 0860 D371 0870 D371 0880 D371 0890 D371 0900 D371 0910 D371 0920 D371 0930 D371 0940 D371 0950 D371 0960 D371 0970 D371 0980 D371 0990 D371 1000 D371 1010 D371 1020 D371 1030 D371 1040 D371 1050 D371 1060 D371 1070 D371 1080 D371 1090 D371 1100 D371 1110 D371 1120 D371 1130

• • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

D371

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Drills Carbide, 12 x D, R30 N, IK

Carbide Drills

• Suitable for materials up to 1200N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • Pertura for maximum tool life

Forets carbure 12xD, hélice 30°, type N, arrosage central

HSS Drills

Punte Metallo Duro, 12 x D, R30 N, Refrigerazione Interna

Brocas de Metal Duro, 12 x D, R30 N, IK

ISO Taps

4 3

Vc Page #: 477  d2 (h6)

204

156

Max drill depth 139

204

156

139

204

156

139

204

156

138

204

156

138

204

156

138

204

156

138

Item #

DIN Taps

D371 1140 D371 1150 D371 1160 D371 1170 D371 1180 D371 1190 D371 1200

Reamers

HSS Endmills

1140 1150 1160 1170 1180 1190 1200

Carbide Endmills

d1 (h7) mm inch 11.4 11.5 11.6 11.7 11.8 11.9 12.0

Size Ref.

Tool Holding

D371 Catalogue Code A0210 Discount Group VHM Material Pertura Tip Surface Finish Sutton Designation Up to 1200N/mm2 R30 - IK Geometry 135° Form C Point Type HA Shank Form (DIN 6535)

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • •

D371

Tech Info

ISO VDI 3323

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, Extra Long 15×D

20×D

30×D

Carbide Drills

• Suitable for materials up to 1200N/mm² • Strong core with internal coolant supply • Micro geometry & surface conditioning for optimal chip control • Pertura coated tip for maximum tool life

Forets carbure Extra Long arrosage central

HSS Drills

Punte Metallo Duro, Foratura Profonda

Brocas de Metal Duro, Extra Larga

ISO Taps

• Adecuado para materiales hasta 1200N/mm² • Núcleo Reforzado con refrigeración interior • Micro geometría y acondicionamiento de la superficie para un control óptimo de la viruta • Recubrimento de punta TIP para una mayor vida útil de la herramienta 1

15xd1 20

4 3

Tool Holding Vc Page #: 477  Size Ref.

DIN Taps Carbide Endmills HSS Endmills Reamers

0300 0400 0500 0600 0800 0900 1000

d2 (h6)

Max. Drill Depth

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 12.0

100 110 118 126 136 145 155 165 173 184 191 205 215 234 275

55 64 73 82 92 100 110 120 128 138 145 155 164 182 218

6 6 6 6 6 6 6 8 8 8 8 10 10 10 12

46 53 61 68 77 83 92 100 107 115 121 129 137 152 182

3 3.5 4 5 6 7 8 8.5 9 10

110 124 134 158 182 206 230 250 260 280

70 82 92 116 138 162 184 200 210 230

6 6 6 6 6 8 8 10 10 10

61 72 80 101 120 141 160 175 183 200

3 4 5 6 8 9 10

145 175 210 245 310 380 380

100 130 165 200 265 330 330

6 6 6 6 8 10 10

91 120 150 182 240 270 300

15×D

0300 0350 0400 0450 0500 0550 0600 0650 0700 0750 0800 0850 0900 1000 1200 0300 0350 0400 0500 0600 0700 0800 0850 0900 1000

d1 (h7)

20×D

30×D

D372 D373 D375

M 8

D372

D373

D375

A0210

VHM

Pertura Tip

Up to 1200N/mm2 Up to 1200N/mm2 Up to 1200N/mm2 R30 - IK

R30 - IK

135° Form C

Item #

D372 0300 D372 0350 D372 0400 D372 0450 D372 0500 D372 0550 D372 0600 D372 0650 D372 0700 D372 0750 D372 0800 D372 0850 D372 0900 D372 1000 D372 1200 D373 0300 D373 0350 D373 0400 D373 0500 D373 0600 D373 0700 D373 0800 D373 0850 D373 0900 D373 1000 D375 0300 D375 0400 D375 0500 D375 0600 D375 0800 D375 0900 D375 1000 N

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

Catalogue Code Product Group Material Surface Finish Application Geometry Point Type

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Carbide, Centre

Carbide Drills

• Used to drill female 60° centre holes in the end of shafts and components, which will later revolve between centres • Designed to maintain accurate centre holes on long production runs • Also used to ensure accurate starting and centring when precision drilling is required • Suitable for materials up to 1600N/mm²

Forets à centrer carbure

HSS Drills

• Convient aux materiaux jusqu'à 1600 N/mm² • Forets à centrer 60° pour chanfreins et centrage sur arbres

Punte Metallo Duro, Punte da centro

• Usato per generare fori guida a 60° in testa ad alberi che verranno poi sottoposti a lavorazione sui centri • Progettato per mantenere precisione dei fori su lunghe produzioni • Usato anche in caso di accurato centraggio per l'esecuzione di fori precisi • Adatto per materiali fino a 1600N/mm²

Brocas de Metal Duro, Centrar

D318

D319

A0202

A0206

VHM

Brt

TiCN

Plain Type

60° Stepped

Size Ref.

Size

d2 (h6)

Item #

0001 0002 0003 0004 0005 0006

1 2 3 4 5 6

3/64

1-1/4

1/16

1/8 3/16

D318 0001 D318 0002 D318 0003 D318 0004 D318 0005 D318 0006

D319 0001 D319 0002 D319 0003 D319 0004 D319 0005 D319 0006

1-7/8

3/32

9/64

1/4

1/8

2-1/8

5/32

5/16

3/16

2-3/4

1/4

7/16

7/32

9/32

1/2

Reamers

HSS Endmills

Carbide Endmills

5/64 7/64

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Form

Tool Holding

ISO Taps

• Se utiliza para avellanado de agujeros a 60° • Diseñado para mantener el centrado de agujeros precisos en largas producciones • También se utiliza para garantizar la precisión de punteado entre centros • Adecuado para materiales hasta 1600N/mm²

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D318 D319

Tech Info

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Carbide, NC Spotting

Carbide Drills

• Rigid design for “seat” position accuracy • 90° offers hole chamfering & spotting with the one tool • 142° for spotting, matching a typical drill point • Only drill to the depth of the point

Brocas de Metal Duro, Avellanado NC

• Diseño rígido para la precisión del posicionamiento del avellanado • 90° de punta ofrece la posibilidad de puntear y avellanar con una sola herramienta • 142° para dejar avellanado, para las brocas de MD típicas • Solo taladre hasta la profundidad del cono

Forets carbure NC

HSS Drills

• Foret NC de précision pour utilisation en machine • Conception rigide pour une précision de position • 90° offre le chanfreinage et centrage des trous avec un seul outil • 142° pour le centrage des forets carbure ou acier rapide de haute technologie

Punte Metallo Duro, Centrino NC

• Progettata per accurati centraggi pre-foratura • 90° offre possibilità di centraggio e smussatura in un unico utensile • 142° per un centraggio accurato pre-foratura • Utilizzare solo la profondità della punta

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 477  d1 (h6) mm inch 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

Size Ref.

DIN Taps Carbide Endmills

0300 0400 0500 0600 0800 1000 1200 1600 2000

90°

142°

D355

D364

D365

D366

A0208

A0210

A0208

A0210

VHM

Brt

AlCrN

Brt

AlCrN

90° Form A

142° Form A

Item #

3.0

4.0

5.0

6.0

8.0

10.0

102

12.0

115

16.0

131

20.0

D355 0300 D355 0400 D355 0500 D355 0600 D355 0800 D355 1000 D355 1200 D355 1600 D355 2000

D364 0300 D364 0400 D364 0500 D364 0600 D364 0800 D364 1000 D364 1200 D364 1600 D364 2000

D365 0300 D365 0400 D365 0500 D365 0600 D365 0800 D365 1000 D365 1200 D365 1600 D365 2000

D366 0300 D366 0400 D366 0500 D366 0600 D366 0800 D366 1000 D366 1200 D366 1600 D366 2000

HSS Endmills Reamers P

D364 / D366

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • • • • • • • • • • • • •

D355 / D365

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

HSS DRILLS

• Stub Series • Jobber Series • Long Series • Extra Long Series • Spotting

Back to index Contents

Drills HSS Finder

Carbide Drills

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

Page

D102 D103 HSS Blu TiN N DIN 338 ≤ 5xØ h9

D179

101

104

UNI

HSS Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

ISO Taps

Catalogue Code D101 Material Surface Finish Brt Sutton Designation Standard Depth of Cut Shank Tolerance

ISO

VDI^ 3323

Material

Condition

N/mm2

440 1 • • ~ 0.45 %C A 190 640 2 • • QT 250 840 3 • • ~ 0.75 %C A 270 910 4 • • QT 300 1010 5 • A 180 610 6 Steel - Low alloy & cast • • < 5% of alloying elements QT 275 930 P 7 • • QT 300 1010 8 • QT 350 1180 9 • A 200 680 10 Steel - High alloy, cast & tool • • HT 325 1100 11 • Ferritic / Martensitic A 200 680 12 Steel - Corrosion resistant & cast Martensitic QT 240 810 13 • Austenitic AH 180 610 14.1 Stainless Steel • Duplex 250 840 M 14.2 • Precipitation Hardening 250 840 14.3 Ferritic / Pearlitic 180 610 15 Cast Iron - Grey (GG) • • Pearlitic 260 880 16 • Ferritic 160 570 17 Cast Iron - Nodular • • K (GGG) Pearlitic 250 840 18 • Ferritic 130 460 19 Cast Iron - Malleable • Pearlitic 230 780 20 • 60 210 21 Aluminum & Magnesium Non Heat Treatable • • - wrought alloy Heat Treatable AH 100 360 22 • • 75 270 23 Aluminum & Magnesium Non Heat Treatable • - cast alloy ≤12% Si Heat Treatable AH 90 320 24 • 130 460 25 Al & Mg - cast alloy >12% Si Non Heat Treatable • N Free cutting, Pb > 1% 110 390 26 Copper & Cu alloys • (Brass/Bronze) Brass (CuZn, CuSnZn) 90 320 27 • Bronze (CuSn) 100 360 28 • 29 Non-metallic - Thermosetting & fiber-reinforced plastics • • 30 Non-metallic - Hard rubber, wood etc. Fe based A 200 680 31 High temp. alloys AH 280 950 32 Ni / Co based A 250 840 33 AH 350 1180 34 C 320 1080 35 CP Titanium 400 MPa 36 Titanium & Ti alloys S Alpha alloys 860 MPa 37.1 Alpha / Beta A 960 MPa 37.2 alloys AH 1170 MPa 37.3 Beta alloys A 830 MPa 37.4 AH 1400 MPa 37.5 HT 45 HRC 38.1 Hardened steel HT 55 HRC 38.2 HT 58 HRC 39.1 H HT 62 HRC 39.2 Chilled C 400 1350 40 Cast Iron • • HT 55 HRC 41 Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) Steel - Non-alloy, cast & free cutting

Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

• Optimal • Effective

~ 0.15 %C

125

D109 D163 D165 D168 D182 D180 D169 HSS Co HSS Co HSS Co SPM HSS Co HSS HSS Co TiAlN Tip Colour Tmp TiAlN TiAlN TiAlN TiAlN TiAlN Tip TiAlN Hard Mat. NH WN UNI NH VA VA DIN 338 DIN 338 DIN 338 ~ DIN 338 ~ DIN 338 ≤ 5xØ ≤ 5xØ ≤ 5xØ ≤ 5xØ ≤ 5xØ ≤ 3xØ ≤ 5xØ h9 h9 h7 h9 h7

• • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • •

• • • • • • • • • •

• • • • • • • • • • • • • •

• • • • • •

• • • • • • •

•

• • • • • •

• • • • • • • • •

• •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• •

• • • • •

• • • •

•

• •

•

• • •

109

110

113

115

118

122

127

146

147

D186 HSS Blu N DIN 1897 ≤ 3xØ -

D100 HSS Blu N

D151 HSS Co TiAlN NH DIN 1897 ≤ 3xØ h9

D177 HSS Co TiAlN WN DIN 1897 ≤ 3xØ h9

D155 D153 SPM HSS Co TiAlN TiAlN UNI VA ~ DIN 1897 ≤ 3xØ ≤ 3xØ h7 h7

D113 HSS Blu N ANSI B94-11 8xØ h9

D171 HSS Co TiAlN NH DIN 340 8xØ h9

C107 C108 HSS Co Brt TiAlN N UNI DIN 335 h9

C100 HSS Co Brt N DIN 373 h6

• •

• • • • • • • •

•

• • • • • • •

•

• • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• •

• • • •

•

• • • • • •

• • • •

• • • • • • • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

•

• • • • • • • •

• •

• • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

•

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tool Holding

•

• • • • • • • •

DIN Taps

•

• • • • • • • • • • • • • • • • • • • • • •

Carbide Endmills

• • • • • • • •

HSS Endmills

• • • • • • • •

VDI^ ISO 3323

Reamers

≤ 3xØ -

Tech Info

ANSI B94-11

ISO Taps

HSS Drills

107

Carbide Drills

Contents

Back to index

Back to index Contents

Drills HSS Finder

Carbide Drills

136

138

139

140

D195 D196 D115 D141 Catalogue Code D194 HSS Co HSS HSS Co Material Colour Tmp TiAlN Blu Surface Finish Tough NH N Sutton Designation Materials DIN 1869-1 DIN 1869-2 DIN 1869-3 DIN 345 DIN 345 Standard ≤ 5xØ Depth of Cut ≤ 10xØ ≤ 12xØ ≤ 14xØ ≤ 5xØ h9 Shank Tolerance

D140 HSS Blu N DIN 341 ≤ 8xØ -

D142 D118 Alloy Brt Brt Adaptor -

D120

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

Page

129

130

131

132

140

UNI

HSS Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

ISO Taps ISO

VDI^ 3323

Material

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers

Tech Info

Condition

1 ~ 0.45 %C A 190 2 QT 250 3 ~ 0.75 %C A 270 4 QT 300 5 A 180 6 Steel - Low alloy & cast < 5% of alloying elements QT 275 7 QT 300 8 QT 350 9 A 200 10 Steel - High alloy, cast & tool HT 325 11 Ferritic / Martensitic A 200 12 Steel - Corrosion resistant & cast Martensitic QT 240 13 Austenitic AH 180 14.1 Stainless Steel Duplex 250 14.2 Precipitation Hardening 250 14.3 Ferritic / Pearlitic 180 15 Cast Iron - Grey (GG) Pearlitic 260 16 Ferritic 160 17 Cast Iron - Nodular (GGG) Pearlitic 250 18 Ferritic 130 19 Cast Iron - Malleable Pearlitic 230 20 60 21 Aluminum & Magnesium Non Heat Treatable - wrought alloy Heat Treatable AH 100 22 75 23 Aluminum & Magnesium Non Heat Treatable - cast alloy ≤12% Si Heat Treatable AH 90 24 130 25 Al & Mg - cast alloy >12% Si Non Heat Treatable Free cutting, Pb > 1% 110 26 Copper & Cu alloys (Brass/Bronze) Brass (CuZn, CuSnZn) 90 27 Bronze (CuSn) 100 28 29 Non-metallic - Thermosetting & fiber-reinforced plastics 30 Non-metallic - Hard rubber, wood etc. Fe based A 200 31 High temp. alloys AH 280 32 Ni / Co based A 250 33 AH 350 34 C 320 35 CP Titanium 400 MPa 36 Titanium & Ti alloys Alpha alloys 860 MPa 37.1 Alpha / Beta A 960 MPa 37.2 alloys AH 1170 MPa 37.3 Beta alloys A 830 MPa 37.4 AH 1400 MPa 37.5 HT 45 HRC 38.1 Hardened steel HT 55 HRC 38.2 HT 58 HRC 39.1 HT 62 HRC 39.2 Chilled C 400 40 Cast Iron HT 55 HRC 41 Steel - Non-alloy, cast & free cutting

~ 0.15 %C

125

N/mm2 440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 610 880 570 840 460 780 210

• • • • • • • • • • • • • •

•

• • • • • • •

• • • • • •

• • • • • • • •

•

• •

• • • • • •

•

• • • •

• • • • •

• • •

•

360 270 320 460 390 320 360

• • • • • • • • • • • • • • • •

680 950 840 1180 1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

• Optimal • Effective

D188 HSS Blu N ≤ 5xØ -

•

143

142

D122

D124

143

144

D125

D130 HSS Co

D135

144

145

HSS Drills

142

Carbide Drills

Contents

Back to index

ISO Taps VDI^

• • • •

• •

• • • • • • • • • • • • • • •

•

• •

•

• • • •

• •

• • • •

•

• •

• • • •

•

• •

•

• • • • • • • •

•

• • • • • • • • • • • • • • • • • • • •

• • • •

• •

•

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

Tool Holding

DIN Taps

Tough Steels

D175 D176 HSS Co TiN NC DIN 1897 h9

Carbide Endmills

Colour Tmp

Ferrous

D136 HSS Brt N DIN 333 ANSI B94-11 -

HSS Endmills

Non Ferrous

HSS Blu

Reamers

HSS Brt

Tech Info

D121

Back to index Contents

Drills Sets

Carbide Drills HSS Drills ISO Taps Tool Holding DIN Taps

D101 SM2

D101 SM3

D101 MTLSM2

D101 MTLSM3

D101 SM30

D101 SM41

D101 SRKM2

D101 SRKM3

D101 SM7

D102 SM1

D102 SM2

D102 SM3

D102 SM30

D102 SM41

D102 SM8

D102 SM99

D179 SM2

D179 SM3

D103 SM3

D180 SM2

D180 SM3

D109 SM2

D109 SM3

D101 S2

D101 S3

D101 MTLS2

D101 MTLS3

D101 S30

D101 S31

Carbide Endmills

D101 SM1

HSS Endmills D101 SRK1

D101 SRK2

D101 SRK3

D101 S7

D102 S1

D102 S2

Reamers Tech Info

D179 S2

D179 S3

D103 S3

D109 S2

D109 S3

D102 S3

D102 S8

Contents

Back to index

Drills Sets

1.5 – 6.5mm x 0.5 + 3.2, 4.8mm

ABS

1.0 – 6.5mm x 0.5

ABS

1.0 – 10.0mm x 0.5

ABS

1.0 – 13.0mm x 0.5

ABS

1.0 – 3.0mm x 0.25, 3.5 – 13.0mm x 0.5 Plastic

1.0mm – 5.9mm x 0.1

Metal

6,0mm – 10.0mm x 0.1

Metal

D102

D179

D103

D180

D109

A1202

A1216

A1202

A0404

HSS

HSS Co

Brt

Blu

TiAIN Tip

TiN

TiAIN Tip

Colour Temp

Tough Materials

R30

R40

R25

118° Standard

118° Form C

118° Form A

130° Standard

135° Form C

Item #

D101 SM1

D102 SM1

D101 SM2 D101 SM3

D102 SM2 D102 SM3 D102 SM8 D102 SM30 D102 SM41 D102 SM99

D179 SM2 D179 SM3

D103 SM3

D180 SM2 D180 SM3

D109 SM2 D109 SM3

D101 SM30 D101 SM41

1.0 – 10.0mm x 0.1 (+ 10.5, 10.9, 11.0, Plastic 100 11.5, 11.9, 12.0, 12.5, 12.9, 13.0mm)

Refill Kits

SRKM2 SRKM3

1.5mm – 3.5mm x 0.5mm

Tray

1.5, 2.0, 3.0, 4.0, 5.0mm

Tray

D101 SRKM2 D101 SRKM3

1.0 – 3.0mm x 0.25, 3.5 – 13.0mm x 0.5 Metal

D101 SM7

Drill Stands Discount Group Z0204

SM7

Imperial (ANSI B94-11)

S1 S2 S3 S8 S30 S31

1/16 – 1/4 x 1/64

ABS

1/16 – 3/8 x 1/64

ABS

1/16 – 1/2 x 1/64

ABS

1/16 – 1/2 x 64ths

Plastic

#1 – #60 Wire Gauge

Metal

#61 – #80 Wire Gauge

Metal

1/16, 3/32, 1/8

Tray

1/16 – 1/8 x 1/64

Tray

1/16 – 3/16 x 1/32

Tray

D101 SRK1 D101 SRK2 D101 SRK3

Metal

D101 S7

Refill Kits

SRK1 SRK2 SRK3

Drill Stands Discount Group Z0204

Carbide Drills

D180 SM30 D180 SM41

D102 S1 D102 S2 D102 S3 D102 S8

D179 S3

D109 S2 D109 S3

D103 S3

D101 S30 D101 S31

Reamers

1/16 – 1/2 x 64ths

D101 S2 D101 S3

D179 SM30 D179 SM41

HSS Drills

D101 A1202

ISO Taps

Case Pieces

Metric (DIN 338)

• Varias combinaciones disponibles • Métrico e Imperial

Tool Holding

Size Ref. Range

Sets de Brocas

• Disponibile in varie comninazione • Metrico e Pollici

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

SM1 SM1 SM2 SM3 SM8 SM30 SM41 SM99

Set di Punte

• Nombreuses combinaisons • Metrique et Inch

Carbide Endmills

Coffrets de Foretss

HSS Endmills

• Various combinations available • Metric and Imperial

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

Tech Info

• • • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D101 D102 D179 D103 D180 D109

•

ISO VDI 3323

• Optimal • Effective

Back to index Contents

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

HSS Drills

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

DIN Taps

0034 0035 0037 0038 0039 0040 0041 0042 0045 0046 0048 0050 0051 0052 0053 0055 0057 0060 0061 0063 0065 0066 0070 0071 0074 0075 0078 0079 0080 0081

d1 (h8)

gauge

Carbide Endmills HSS Endmills Reamers

0.34 0.35 0.37 0.38 0.40 0.40 0.41 0.42 0.45 0.46 0.48 0.50 0.51 0.52 0.53 0.55 0.57 0.60 0.61 0.63 0.65 0.66 0.70 0.71 0.74 0.75 0.79 0.79 0.80 0.81

79 1/64 78

76 75 74 73 72 71 70 69 68 1/32 67 P

D101 D102 D103 D179

13 M

D101

D102

D103

D179

A0402

A0420

A0402

HSS

Brt

Blu

TiN

TiAIN Tip

R30

118° Standard

118° Form A

118° Form C

Bulk (10)

Item #

D101 0034 D101 0035 D101 0037 D101 0038 D101 0039 D101 0040 D101 0041 D101 0042 D101 0045 D101 0046 D101 0048 D101 0050 D101 0051 D101 0052 D101 0053 D101 0055 D101 0057 D101 0060 D101 0061 D101 0063 D101 0065 D101 0066 D101 0070 D101 0071 D101 0074 D101 0075 D101 0078 D101 0079 D101 0080 D101 0081

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

HSS Drills

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

64 63 62 61 60 59 58 57

56 3/64

55 54

53 P

ISO

D101 D102 D103 D179

18 M

HSS

Blu

TiN

TiAIN Tip

R30

118° Standard

118° Form A

118° Form C

Bulk (10)

Item #

D101 0084 D101 0085 D101 0089 D101 0090 D101 0091 D101 0094 D101 0095 D101 0096 D101 0099 D101 0100 D101 0102 D101 0104 D101 0105 D101 0107 D101 0109 D101 0110 D101 0115 D101 0118 D101 0119 D101 0120 D101 0125 D101 0130 D101 0132 D101 0135 D101 0139 D101 0140 D101 0145 D101 0150 D101 0151 D101 0155

• • • • • • • • • D102 0100 • • D102 0105 • • D102 0110 D102 0115 • D102 0119 D102 0120 D102 0125 D102 0130 • D102 0135 • D102 0140 D102 0145 D102 0150 • D102 0155

• • • • • • • • • D103 0100 • •

Tool Holding

HSS

Brt

D179 0100

D179 0110

D179 0119 D179 0120 D179 0130

D179 0140 D103 0150

D179 0150

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

VDI 3323

l2 13

HSS

DIN Taps

l1 35

D179 A0402

Carbide Endmills

D103 A0420

HSS Endmills

gauge

0.84 0.85 0.89 0.90 0.91 0.94 0.95 0.96 0.99 1.00 1.02 1.04 1.05 1.07 1.09 1.10 1.15 1.18 1.19 1.20 1.25 1.30 1.32 1.35 1.40 1.40 1.45 1.50 1.51 1.55

D102 A0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

0084 0085 0089 0090 0091 0094 0095 0096 0099 0100 0102 0104 0105 0107 0109 0110 0115 0118 0119 0120 0125 0130 0132 0135 0139 0140 0145 0150 0151 0155

d1 (h8)

D101 A0402

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

Tech Info

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

HSS Drills

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

DIN Taps

0159 0160 0161 0165 0170 0171 0175 0178 0180 0185 0184 0190 0193 0195 0198 0199 0200 0205 0206 0208 0210 0215 0218 0220 0225 0226 0230 0235 0237 0238

d1 (h8)

gauge

1/16

Carbide Endmills HSS Endmills Reamers

1.59 1.60 1.61 1.65 1.70 1.70 1.75 1.78 1.80 1.85 1.85 1.90 1.93 1.95 1.98 1.99 2.00 2.05 2.06 2.08 2.10 2.15 2.18 2.20 2.25 2.26 2.30 2.35 2.37 2.38

51 50

49 48 5/64 47

46 45

42 3/32 P

VDI 3323

D101 D102 D103 D179

D102

D103

D179

A0402

A0420

A0402

HSS

Brt

Blu

TiN

TiAIN Tip

R30

118° Standard

118° Form A

118° Form C

Bulk (10)

Item #

D101 0159 D101 0160 D101 0161 D101 0165 D101 0170 D101 0171 D101 0175 D101 0178 D101 0180 D101 0185 D101 0184 D101 0190 D101 0193 D101 0195 D101 0198 D101 0199 D101 0200 D101 0205 D101 0206 D101 0208 D101 0210 D101 0215 D101 0218 D101 0220 D101 0225 D101 0226 D101 0230 D101 0235 D101 0237 D101 0238

D102 0159 D102 0160 • D102 0165 D102 0170 • D102 0175 • D102 0180 D102 0185 • D102 0190 • D102 0195 D102 0198 • D102 0200 D102 0205 • • D102 0210 D102 0215 • D102 0220 D102 0225 • D102 0230 D102 0235 • D102 0238

M 8

D101 A0402

Item # D179 0159 D179 0160

D179 0170

D179 0180

D179 0190

D179 0198 D103 0200

D179 0200

D179 0210

D179 0220

D179 0230

D179 0238 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

ISO

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

HSS Drills

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

40 39 38 37

36 7/64 35 34 33 32

31 1/8

30 P

ISO

D101 D102 D103 D179

41 M

HSS

Blu

TiN

TiAIN Tip

R30

118° Form A > 4mm†

118° Form A

118° Form C

Bulk (10)

Item #

D101 0240 D101 0244 D101 0245 D101 0249 D101 0250 D101 0253 D101 0255 D101 0258 D101 0260 D101 0264 D101 0265 D101 0270 D101 0271 D101 0275 D101 0278 D101 0279 D101 0280 D101 0282 D101 0285 D101 0287 D101 0290 D101 0294 D101 0295 D101 0300 D101 0305 D101 0310 D101 0318 D101 0320 • D101 0326

D102 0240 • D102 0245 • D102 0250 • D102 0255 • D102 0260 • D102 0265 D102 0270 • D102 0275 D102 0278 • D102 0280 • D102 0285 • D102 0290 • D102 0295 D102 0300 • D102 0310 D102 0318 D102 0320 • •

Tool Holding

HSS

Brt

Item #

DIN Taps

HSS

D179 0240

D103 0250

D179 0250

D179 0260

D179 0270

D179 0278 D179 0280

D179 0290

D103 0300

D179 0300 D179 0310 D179 0318 D179 0320

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

VDI 3323

l2 30

D179 A0402

Carbide Endmills

l1 57

D103 A0420

HSS Endmills

gauge

2.40 2.44 2.45 2.49 2.50 2.53 2.55 2.58 2.60 2.64 2.65 2.70 2.70 2.75 2.78 2.79 2.80 2.82 2.85 2.87 2.90 2.95 2.95 3.00 3.05 3.10 3.18 3.20 3.25 3.26

D102 A0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

0240 0244 0245 0249 0250 0253 0255 0258 0260 0264 0265 0270 0271 0275 0278 0279 0280 0282 0285 0287 0290 0294 0295 0300 0305 0310 0318 0320 0325 0326

d1 (h8)

D101 A0402

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

Tech Info

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

HSS Drills

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

DIN Taps

0330 0340 0345 0350 0356 0357 0360 0366 0370 0373 0375 0379 0380 0386 0390 0391 0397 0399 0400 0404 0409 0410 0420 0422 0425 0430 0431 0437 0439 0440

d1 (h8)

gauge

Carbide Endmills HSS Endmills Reamers

3.30 3.40 3.45 3.50 3.57 3.57 3.60 3.66 3.70 3.73 3.75 3.80 3.80 3.86 3.90 3.91 3.97 3.99 4.00 4.04 4.09 4.10 4.20 4.22 4.25 4.30 4.30 4.37 4.39 4.40

29 28 9/64 27 26 25 24 23 5/32 22 21 20

18 11/64 17 P

VDI 3323

D101 D102 D103 D179

l2 36

47 M

D102

D103

D179

A0402

A0420

A0402

HSS

Brt

Blu

TiN

TiAIN Tip

R30

118° Form A†

118° Form C

Bulk (10)

Item #

D101 0330 D101 0340 D101 0345 D101 0350 D101 0356 D101 0357 D101 0360 D101 0366 D101 0370 D101 0373 • D101 0379 D101 0380 D101 0386 D101 0390 D101 0391 D101 0397 D101 0399 D101 0400 D101 0404 D101 0409 D101 0410 D101 0420 D101 0422 • D101 0430 D101 0431 D101 0437 D101 0439 D101 0440

D102 0330 D102 0340 • D102 0350 • D102 0357 D102 0360 • D102 0370 • D102 0375 • D102 0380 • D102 0390 • D102 0397 • D102 0400 • • D102 0410 D102 0420 • D102 0425 D102 0430 • D102 0437 • D102 0440

Item # D179 0330 D179 0340

D103 0350

D179 0350 D179 0357 D179 0360 D179 0370

D179 0380 D179 0390 D179 0397 D103 0400

D179 0400

D179 0410 D179 0420

D179 0430 D179 0437 D179 0440 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

ISO

l1 65

D101 A0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

HSS Drills

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

15 14 13

3/16 12 11 10 9 8 7 13/64 6 5

4 3 7/32 P

ISO

D101 D102 D103 D179

l2 56

64 M

HSS

Blu

TiN

TiAIN Tip

R30

118° Standard

118° Form A†

118° Form C

Bulk 10 (5 > 7.5mm)

Item #

D103 0450

D179 0450

Bulk 10 (5 > 7.5mm) Bulk 10 (5 > 7.5mm)

Item #

D101 0449 D101 0450 D101 0457 D101 0460 D101 0462 D101 0469 D101 0470 • D101 0476 D101 0480 D101 0481 D101 0485 D101 0490 D101 0491 D101 0498 D101 0500 D101 0506 D101 0510 D101 0511 D101 0516 D101 0518 D101 0520 D101 0522 • D101 0530 D101 0531 D101 0540 D101 0541 D101 0550 D101 0556

• D102 0450 • D102 0460 • • D102 0470 D102 0475 D102 0476 D102 0480 • • D102 0490 • • D102 0500 • D102 0510 • D102 0516 • D102 0520 • D102 0525 D102 0530 • D102 0540 • D102 0550 D102 0556

Tool Holding

HSS

Brt

D179 0460

D179 0470 D179 0476 D179 0480

D179 0490

D103 0500

D179 0500 D179 0510 D179 0516 D179 0520

D179 0530 D179 0540 D103 0550 S

D179 0550 D179 0556 H

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

VDI 3323

l1 86

HSS

DIN Taps

D179 A0402

Carbide Endmills

gauge

4.50 4.50 4.57 4.60 4.62 4.70 4.70 4.75 4.76 4.80 4.80 4.85 4.90 4.91 4.98 5.00 5.05 5.10 5.10 5.16 5.18 5.20 5.22 5.25 5.30 5.31 5.40 5.41 5.50 5.56

D103 A0420

HSS Endmills

0449 0450 0457 0460 0462 0469 0470 0475 0476 0480 0481 0485 0490 0491 0498 0500 0506 0510 0511 0516 0518 0520 0522 0525 0530 0531 0540 0541 0550 0556

d1 (h8)

D102 A0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

D101 A0402

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

Tech Info

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

HSS Drills

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

DIN Taps

0560 0561 0570 0575 0579 0580 0590 0595 0600 0610 0620 0625 0630 0635 0640 0650 0660 0670 0675 0676 0680 0690 0700 0710 0714 0720 0725 0730 0740 0750

d1 (h8)

gauge

Carbide Endmills HSS Endmills Reamers

5.60 5.61 5.70 5.75 5.79 5.80 5.90 5.95 6.00 6.10 6.20 6.25 6.30 6.35 6.40 6.50 6.60 6.70 6.75 6.75 6.80 6.90 7.00 7.10 7.14 7.20 7.25 7.30 7.40 7.50

15/64

1/4

17/64

9/32

VDI 3323

D101 D102 D103 D179

l2 57

101

102

101

109

105

109

108

109

D103

D179

A0420

A0402

HSS

Brt

Blu

TiN

TiAIN Tip

R30

118° Form A†

118° Form C

5 (1 > 13mm)

Item #

D101 0560 D101 0561 D101 0570 • D101 0579 D101 0580 D101 0590 D101 0595 D101 0600 D101 0610 D101 0620 • D101 0630 D101 0635 D101 0640 D101 0650 D101 0660 D101 0670

D102 0560 • D102 0570 D102 0575 • D102 0580 D102 0590 D102 0595 D102 0600 D102 0610 D102 0620 D102 0625 D102 0630 D102 0635 D102 0640 D102 0650 D102 0660 D102 0670 D102 0675 D102 0676 D102 0680 D102 0690 D102 0700 D102 0710 D102 0714 D102 0720 D102 0725 D102 0730 D102 0740 D102 0750

D101 0676 D101 0680 D101 0690 D101 0700 D101 0710 D101 0714 D101 0720 • D101 0730 D101 0740 D101 0750 M

D102 A0402

Item # D179 0560 D179 0570

D103 0600

D103 0650

D103 0700

D103 0750 S

D179 0580 D179 0590 D179 0595 D179 0600 D179 0610 D179 0620 D179 0630 D179 0635 D179 0640 D179 0650 D179 0660 D179 0670 D179 0676 D179 0680 D179 0690 D179 0700 D179 0710 D179 0714 D179 0720 D179 0730 D179 0740 D179 0750 H

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

ISO

l1 93

D101 A0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

HSS Drills

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

5/16

21/64

11/32

23/64

3/8 P

ISO

D101 D102 D103 D179

l2 78

117

114

117

125

121

125

124

125

127

92 M

HSS

Brt

Blu

TiN

TiAIN Tip

R30

118° Form A†

118° Form C

Item #

D101 0754 D101 0760 D101 0770 • D101 0780 D101 0790 D101 0794 D101 0800 D101 0810 D101 0820 • D101 0830 D101 0833 D101 0840 D101 0850 D101 0860 D101 0870 D101 0873 • D101 0880 D101 0890 D101 0900 D101 0910 D101 0913 D101 0920 • D101 0930 D101 0940 D101 0950 D101 0953

D102 0754 D102 0760 D102 0770 D102 0775 D102 0780 D102 0790 D102 0794 D102 0800 D102 0810 D102 0820 D102 0825 D102 0830 D102 0833 D102 0840 D102 0850 D102 0860 D102 0870 D102 0873 D102 0875 D102 0880 D102 0890 D102 0900 D102 0910 D102 0913 D102 0920 D102 0925 D102 0930 D102 0940 D102 0950 D102 0953

Item # D179 0754 D179 0760 D179 0770

D103 0800

D103 0850

D103 0900

D103 0950 S

D179 0780 D179 0790 D179 0794 D179 0800 D179 0810 D179 0820 D179 0830 D179 0833 D179 0840 D179 0850 D179 0860 D179 0870 D179 0873 D179 0880 D179 0890 D179 0900 D179 0910 D179 0913 D179 0920 D179 0930 D179 0940 D179 0950 D179 0953 H

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

VDI 3323

l1 111

HSS

DIN Taps

gauge

19/64

7.54 7.60 7.70 7.75 7.80 7.90 7.94 8.00 8.10 8.20 8.25 8.30 8.33 8.40 8.50 8.60 8.70 8.73 8.75 8.80 8.90 9.00 9.10 9.13 9.20 9.25 9.30 9.40 9.50 9.52

D179 A0402

Carbide Endmills

0754 0760 0770 0775 0780 0790 0794 0800 0810 0820 0825 0830 0833 0840 0850 0860 0870 0873 0875 0880 0890 0900 0910 0913 0920 0925 0930 0940 0950 0953

D103 A0420

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

Size Ref.

d1 (h8)

D102 A0402

HSS Endmills

Vc Page #: 479 

D101 A0402

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Tool Holding

Tech Info

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

HSS Drills

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

DIN Taps

0960 0970 0975 0980 0990 0992 1000 1010 1020 1025 1030 1032 1040 1050 1060 1070 1072 1075 1080 1090 1100 1110 1111 1120 1125 1130 1140 1150 1151 1160

d1 (h8)

gauge

Carbide Endmills HSS Endmills Reamers

9.60 9.70 9.75 9.80 9.90 9.92 10.00 10.10 10.20 10.25 10.30 10.32 10.40 10.50 10.60 10.70 10.72 10.75 10.80 10.90 11.00 11.10 11.11 11.20 11.25 11.30 11.40 11.50 11.51 11.60

25/64

13/32

27/64

7/16

29/64 P

D101 D102 D103 D179

l2 87

133

130

133

142

137

100

142

140

103

142

143

106

142

94 M

D102

D103

D179

A0402

A0420

A0402

HSS

Brt

Blu

TiN

TiAIN Tip

R30

118° Form A†

118° Form C

5 (1 > 13mm)

Item #

D101 0960 D101 0970 • D101 0980 D101 0990 D101 0992 D101 1000 D101 1010 D101 1020 • D101 1030 D101 1032 D101 1040 D101 1050 D101 1060 D101 1070 D101 1072 • D101 1080 D101 1090 D101 1100 D101 1110 D101 1111 D101 1120 • D101 1130 D101 1140 D101 1150 D101 1151 D101 1160

D102 0960 D102 0970 D102 0975 D102 0980 D102 0990 D102 0992 D102 1000 D102 1010 D102 1020 D102 1025 D102 1030 D102 1032 D102 1040 D102 1050 D102 1060 D102 1070 D102 1072 D102 1075 D102 1080 D102 1090 D102 1100 D102 1110 D102 1111 D102 1120 D102 1125 D102 1130 D102 1140 D102 1150 D102 1151 D102 1160

Item # D179 0960 D179 0970

D103 1000

D103 1050

D103 1100

D103 1150

D179 0980 D179 0990 D179 0992 D179 1000 D179 1010 D179 1020 D179 1030 D179 1032 D179 1040 D179 1050 D179 1060 D179 1070 D179 1072 D179 1080 D179 1090 D179 1100 D179 1110 D179 1111 D179 1120 D179 1130 D179 1140 D179 1150 D179 1151 D179 1160 H

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

ISO VDI 3323

l1 133

D101 A0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

HSS Drills

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

15/32

31/64

1/2

33/64 17/32

35/64

9/16 P

ISO

D101 D102 D103 D179

l2 94

142

146

110

151

101

151

101

151

101

151

101

151

101

149

111

151

101

151

101

151

101

152

114

151

101

151

101

151

101

151

101

151

101

151

101

151

101

160

108

160

108

160

108

160

108

160

108

169

114

169

114

169

114

HSS

Blu

TiN

TiAIN Tip

R30

118° Form A†

118° Form C

Item #

D101 1170 • D101 1180 D101 1190 D101 1191 D101 1200 D101 1210 D101 1220 • D101 1230 D101 1231 D101 1240 D101 1250 D101 1260 D101 1269 D101 1270 • D101 1280 D101 1290 D101 1300 • • •

D102 1170 D102 1175 D102 1180 D102 1190 D102 1191 D102 1200 D102 1210 D102 1220 D102 1225 D102 1230 D102 1231 D102 1240 D102 1250 D102 1260 D102 1269 D102 1270 D102 1275 D102 1280 D102 1290 D102 1300 D102 1310 D102 1320 D102 1349 D102 1350 D102 1380 D102 1389 D102 1400 D102 1425 D102 1429 D102 1450

• • • • • •

M 8

HSS

Brt

Item # D179 1170

D103 1200

D179 1180 D179 1190 D179 1191 D179 1200 D179 1210 D179 1220 D179 1230 D179 1231 D179 1240 D179 1250 D179 1260 D179 1269 D179 1270

D103 1300

D179 1280 D179 1290 D179 1300 D179 1310 D179 1349 D179 1350

D179 1400 D179 1429 D179 1450 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

VDI 3323

l1 142

HSS

DIN Taps

gauge

11.70 11.75 11.80 11.90 11.91 12.00 12.10 12.20 12.25 12.30 12.30 12.40 12.50 12.60 12.70 12.70 12.75 12.80 12.90 13.00 13.10 13.20 13.49 13.50 13.80 13.89 14.00 14.25 14.29 14.50

D179 A0402

Carbide Endmills

1170 1175 1180 1190 1191 1200 1210 1220 1225 1230 1231 1240 1250 1260 1269 1270 1275 1280 1290 1300 1310 1320 1349 1350 1380 1389 1400 1425 1429 1450

D103 A0420

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

Size Ref.

d1 (h8)

D102 A0402

HSS Endmills

Vc Page #: 479 

D101 A0402

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Tool Holding

Tech Info

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber

Carbide Drills

• General purpose drill • Web thinned† point for easier penetration • Split point for easier penetration • Designed for machine and hand held drilling

Foretss queue cylindrique

• Pour applications générales • Pointe amaincie pour une pénétration plus facile • Pointe fendue pour une pénétration plus facile • Pour utilisation sur machine et à main

HSS Drills

Punte da trapano

• Punta Universale • Nocciolo assottigliato per facilitare la foratura • Tagliente trasversale per facilitare la foratura • Progettata per uso con Macchine e Manuale

Brocas Jobber

ISO Taps

• Taladro de uso general • Punta reducida para penetración más fácil • División de punta para penetración más fácil • Diseñado para máquinas y taladrado manual A

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479  Size Ref.

DIN Taps

1468 1475 1500 1508 1525 1548 1550 1575 1588 1600 1627 1667 1707 1746

d1 (h8)

gauge

37/64

Carbide Endmills

14.68 14.75 15.00 15.08 15.25 15.48 15.50 15.75 15.88 16.00 16.27 16.67 17.07 17.46

19/32 39/64

5/8 41/64 21/32 43/64 11/16

D101

D102

D103

D179

A0402

A0420

A0402

HSS

Brt

Blu

TiN

TiAIN Tip

R30

118° Form A†

118° Form C

5 (1 > 13mm)

Item #

169

114

169

114

169

114

178

120

178

120

178

120

178

120

178

120

178

120

178

120

184

125

184

125

191

130

191

130

• • • • • • • • • • • • • •

D102 1468 D102 1475 D102 1500 D102 1508 D102 1525 D102 1548 D102 1550 D102 1575 D102 1588 D102 1600 D102 1627 D102 1667 D102 1707 D102 1746

D179 1500

D179 1550 D179 1588 D179 1600

HSS Endmills Reamers

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Tech Info

D101 D102 D103 D179

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Available on request as special manufacture. Subject to lead time.

†

Web thinning only applies to metric sizes

• • • •

ISO VDI 3323

• Optimal • Effective

NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber, Heavy Duty

Carbide Drills

• Heavy duty design • Cobalt content ensures high abrasion resistance • Suitable for hard materials up to 850N/mm² • Self centring 135° split point

Foretss queue cylindrique haute résistance

• Outils pour haute résistance • HSS-Cobalt pour les aciers à haute résistance, résisistance à l’abrasion • Utilisable dans les aciers jusqu’à 850N/mm² • Auto centrant avec sa pointe et son affûtage 135°

HSS Drills

Punte da trapano, Heavy Duty

• Design resistente • Contiene Cobalto per assicurare alta resistenza all’abrasione • Ideale per materiali duri fino a 850N/mm² • Auto centraggio con elica a 135°

Brocas Jobber, Trabajos Pesados

ISO Taps

• Diseño robusto • Contenido en cobalto, que garantiza una alta resistencia a la abrasión • Adecuado para materiales duros de hasta 850N/mm² • Punta autocentrante de 135°

D109 0100 D109 0110 D109 0120 D109 0130 D109 0140 D109 0150 D109 0159 D109 0160 D109 0170 D109 0180 D109 0190 D109 0200 D109 0210 D109 0220 D109 0230 D109 0238 D109 0240 D109 0250 D109 0260 D109 0270 D109 0280 D109 0290 D109 0300 D109 0310 D109 0318 D109 0320 D109 0330 D109 0340

P 6

M 8

57 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

* Standard 135° point below 3/32"

Item # D109 0350 D109 0357 D109 0360 D109 0370 D109 0380 D109 0390 D109 0397 D109 0400 D109 0410 D109 0420 D109 0430 D109 0437 D109 0440 D109 0450 D109 0460 D109 0470 D109 0476 D109 0480 D109 0490 D109 0500 D109 0510 D109 0516 D109 0520 D109 0530 D109 0540 D109 0550 D109 0556 D109 0560

•

l2 39

•

• • • • •

• • •

D109

• • • • • •

ISO VDI 3323

l1 70

DIN Taps

d1 (h8) Size Ref. mm inch 0350 3.50 0357 3.57 9/64 0360 3.60 0370 3.70 0380 3.80 0390 3.90 0397 3.97 5/32 0400 4.00 0410 4.10 0420 4.20 0430 4.30 0437 4.37 11/64 0440 4.40 0450 4.50 0460 4.60 0470 4.70 0476 4.76 3/16 0480 4.80 0490 4.90 0500 5.00 0510 5.10 0516 5.16 13/64 0520 5.20 0530 5.30 0540 5.40 0550 5.50 0556 5.56 7/32 0560 5.60

Carbide Endmills

Item #

HSS Endmills

Reamers

• •

d1 (h8) Size Ref. mm inch 0100 1.00* 0110 1.10* 0120 1.20* 0130 1.30* 0140 1.40* 0150 1.50* 0159 1.59* 1/16 0160 1.60* 0170 1.70* 0180 1.80* 0190 1.90* 0200 2.00* 0210 2.10* 0220 2.20* 0230 2.30* 0238 2.38* 3/32 0240 2.40* 0250 2.50 0260 2.60 0270 2.70 0280 2.80 0290 2.90 0300 3.00 0310 3.10 0318 3.18 1/8 0320 3.20 0330 3.30 0340 3.40

Tech Info

Vc Page #: 479 

Tool Holding

D109 Catalogue Code A0404 Discount Group HSS Co Material Colour Temp Surface Finish Sutton Designation Hard Materials R25 Geometry Point Type 135° Form C > 3/32* 10 Order Quantity

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber, Heavy Duty

Carbide Drills

• Heavy duty design • Cobalt content ensures high abrasion resistance • Suitable for hard materials up to 850N/mm² • Self centring 135° split point

Foretss queue cylindrique haute résistance

HSS Drills

Punte da trapano, Heavy Duty

• Design resistente • Contiene Cobalto per assicurare alta resistenza all’abrasione • Ideale per materiali duri fino a 850N/mm² • Auto centraggio con elica a 135°

Brocas Jobber, Trabajos Pesados

Tool Holding

D109 Catalogue Code A0404 Discount Group HSS Co Material Colour Temp Surface Finish Sutton Designation Hard Materials R25 Geometry 135° Form C Point Type Order Quantity 10 (5 > 7.5mm)

Vc Page #: 479 

57 57 67 57 63 63 63 70 63 63 63 63 73 69 69 69 69 75 69 69 69 69 78 75 75 75 75

M 8

Item # D109 0794 D109 0800 D109 0810 D109 0820 D109 0830 D109 0833 D109 0840 D109 0850 D109 0860 D109 0870 D109 0873 D109 0880 D109 0890 D109 0900 D109 0910 D109 0913 D109 0920 D109 0930 D109 0940 D109 0950 D109 0953 D109 0960 D109 0970 D109 0980 D109 0990 D109 0992 D109 1000 D109 1010

75 75 75 75 84 75 75 81 81 87 81 81 81 81 89 81 81 81 81 92 87 87 87 87 95 87 87 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

l2 81

•

• • •

Tech Info

•

Reamers

D109 0570 D109 0580 D109 0590 D109 0595 D109 0600 D109 0610 D109 0620 D109 0630 D109 0635 D109 0640 D109 0650 D109 0660 D109 0670 D109 0676 D109 0680 D109 0690 D109 0700 D109 0710 D109 0714 D109 0720 D109 0730 D109 0740 D109 0750 D109 0754 D109 0760 D109 0770 D109 0780 D109 0790

d1 (h8) Size Ref. mm l1 inch 0794 7.94 5/16 114 117 0800 8.00 117 0810 8.10 117 0820 8.20 117 0830 8.30 0833 8.33 21/64 117 117 0840 8.40 117 0850 8.50 125 0860 8.60 125 0870 8.70 0873 8.73 11/32 121 125 0880 8.80 125 0890 8.90 125 0900 9.00 125 0910 9.10 0913 9.13 23/64 124 125 0920 9.20 125 0930 9.30 125 0940 9.40 125 0950 9.50 0953 9.52 3/8 127 133 0960 9.60 133 0970 9.70 133 0980 9.80 133 0990 9.90 0992 9.92 25/64 130 133 1000 10.00 133 1010 10.10

• • • • • •

HSS Endmills

• •

Carbide Endmills

D109

Item #

ISO VDI 3323

• • • • •

DIN Taps

d1 (h8) Size Ref. mm l1 inch 93 0570 5.70 93 0580 5.80 93 0590 5.90 0595 5.95 15/64 98 93 0600 6.00 101 0610 6.10 101 0620 6.20 101 0630 6.30 0635 6.35 1/4 102 101 0640 6.40 101 0650 6.50 101 0660 6.60 101 0670 6.70 0676 6.75 17/64 105 109 0680 6.80 109 0690 6.90 109 0700 7.00 109 0710 7.10 0714 7.14 9/32 108 109 0720 7.20 109 0730 7.30 109 0740 7.40 109 0750 7.50 0754 7.54 19/64 111 117 0760 7.60 117 0770 7.70 117 0780 7.80 117 0790 7.90

•

ISO Taps

• Diseño robusto • Contenido en cobalto, que garantiza una alta resistencia a la abrasión • Adecuado para materiales duros de hasta 850N/mm² • Punta autocentrante de 135°

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber, Heavy Duty

Carbide Drills

• Heavy duty design • Cobalt content ensures high abrasion resistance • Suitable for hard materials up to 850N/mm² • Self centring 135° split point

Foretss queue cylindrique haute résistance

HSS Drills

Punte da trapano, Heavy Duty

• Design resistente • Contiene Cobalto per assicurare alta resistenza all’abrasione • Ideale per materiali duri fino a 850N/mm² • Auto centraggio con elica a 135°

Brocas Jobber, Trabajos Pesados

ISO Taps

• Diseño robusto • Contenido en cobalto, que garantiza una alta resistencia a la abrasión • Adecuado para materiales duros de hasta 850N/mm² • Punta autocentrante de 135°

87 87 87 94 100 94 94 94 103 94 94 94 94 94 106 94 94 94 94 110 101 101 101 101 111

M 8

101

151

101

152

114

151

101

151

101

151

101

151

101

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

151

•

• • • • • •

Item # D109 1240 D109 1250 D109 1260 D109 1269 D109 1270 D109 1280 D109 1290 D109 1300

DIN Taps

l2 101

HSS Endmills

l1 151

Reamers

D109 1020 D109 1030 D109 1032 D109 1040 D109 1050 D109 1060 D109 1070 D109 1072 D109 1080 D109 1090 D109 1100 D109 1111 D109 1110 D109 1120 D109 1130 D109 1140 D109 1150 D109 1151 D109 1160 D109 1170 D109 1180 D109 1190 D109 1191 D109 1200 D109 1210 D109 1220 D109 1230 D109 1231

d1 (h8) Size Ref. mm inch 1240 12.40 1250 12.50 1260 12.60 1269 12.70 1/2 1270 12.70 1280 12.80 1290 12.90 1300 13.00

Tech Info

• • • • •

• • •

D109

Item #

ISO VDI 3323

• •

d1 (h8) Size Ref. mm l1 inch 133 1020 10.20 133 1030 10.30 1032 10.32 13/32 133 133 1040 10.40 133 1050 10.50 133 1060 10.60 142 1070 10.70 1072 10.72 27/64 137 142 1080 10.80 142 1090 10.90 142 1100 11.00 1111 11.11 7/16 140 142 1110 11.10 142 1120 11.20 142 1130 11.30 142 1140 11.40 142 1150 11.50 1151 11.51 29/64 143 142 1160 11.60 142 1170 11.70 142 1180 11.80 142 1190 11.90 1191 11.91 15/32 146 151 1200 12.00 151 1210 12.10 151 1220 12.20 151 1230 12.30 1231 12.30 31/64 149

Carbide Endmills

Vc Page #: 479 

Tool Holding

D109 Catalogue Code A0404 Discount Group HSS Co Material Colour Temp Surface Finish Sutton Designation Hard Materials R25 Geometry 135° Form C Point Type Order Quantity 10 (5 > 7.5mm)

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber, DHJ

Carbide Drills

• High performance drill • Suitable for materials up to 1200N/mm² • Point geometry ensures high strength • Parabolic flute design for optimal chip transportation • TiAlN for longer tool life

Brocas Jobber, DHJ

• Broca de alto rendimiento • Adecuado para materiales de hasta 1200N/mm² • La geometría de la punta garantiza una alta resistencia • Diseño de hélice parabólica para una evacuación óptima de la viruta • TiAlN para una mayor vida útil de la herramienta

Forets queue cylindrique haute performance DHJ

HSS Drills

• Forets Haute Performance • Utilisable dans les matériaux jusqu’à 1200N/mm² • Affûtage 130° pour un parfait centrage • Lèvres parabolic pour une bonne évacuation copeaux • Revêtement TiAlN pour une meilleure durée de vie

Punte da trapano, DHJ

• Punta ad alta prestazione • Ideale per materiali fino a 1200N/mm² • Geometria di punta per garantire un’elevata resistenza • Scalanatura tagliente progettato per ottima evaquazione truciolo • TiAlN per massimizzare vita utensile

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 479 

Reamers

l2 13

39 P

D163

M 8

Size Ref.

0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650

† Sizes <3.0 point type: 130° 4 Facet

3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

d1 (h8)

TiAlN

NH R40 130° Form B -

Item #

D163 0380 D163 0390 D163 0400 D163 0410 D163 0420 D163 0430 D163 0440 D163 0450 D163 0460 D163 0470 D163 0480 D163 0490 D163 0500 D163 0510 D163 0520 D163 0530 D163 0540 D163 0550 D163 0560 D163 0570 D163 0580 D163 0590 D163 0600 D163 0610 D163 0620 D163 0630 D163 0640 D163 0650

101

63 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

Item # D163 0100 D163 0110 D163 0120 D163 0130 D163 0140 D163 0150 D163 0160 D163 0170 D163 0180 D163 0190 D163 0200 D163 0210 D163 0220 D163 0230 D163 0240 D163 0250 D163 0260 D163 0270 D163 0280 D163 0290 D163 0300 D163 0310 D163 0320 D163 0330 D163 0340 D163 0350 D163 0360 D163 0370

HSS Co

•

HSS Endmills

l1 34

•

Carbide Endmills

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7

• • • • •

DIN Taps

d1 (h8)

0100† 0110† 0120† 0130† 0140† 0150† 0160† 0170† 0180† 0190† 0200† 0210† 0220† 0230† 0240† 0250† 0260† 0270† 0280† 0290† 0300 0310 0320 0330 0340 0350 0360 0370

• • • • • • •

Size Ref.

Point Form

D163 A0418

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber, DHJ • High performance drill • Suitable for materials up to 1200N/mm² • Point geometry ensures high strength • Parabolic flute design for optimal chip transportation • TiAlN for longer tool life

Carbide Drills

Brocas Jobber, DHJ

Forets queue cylindrique haute performance DHJ

HSS Drills

Punte da trapano, DHJ

ISO Taps

Size Ref.

101

109

117

125

0940 0950 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180 1190 1200 1210

P 2

M 8

Item #

125

133

142

D163 0940 D163 0950 D163 0960 D163 0970 D163 0980 D163 0990 D163 1000 • D163 1020 • • D163 1050 • • D163 1080 • D163 1100 D163 1110 • • • D163 1150 • • D163 1180 • D163 1200 •

142

151

101

151

101

151

101 S

Tool Holding

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • •

D163

9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 12.1

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

ISO VDI 3323

d1 (h8)

130° Form B

DIN Taps

Item # D163 0660 D163 0670 D163 0680 D163 0690 D163 0700 D163 0710 D163 0720 D163 0730 D163 0740 D163 0750 D163 0760 D163 0770 D163 0780 D163 0790 D163 0800 D163 0810 D163 0820 D163 0830 D163 0840 D163 0850 D163 0860 D163 0870 D163 0880 D163 0890 D163 0900 D163 0910 D163 0920 D163 0930

NH R40

Carbide Endmills

l2 63

TiAlN

HSS Endmills

l1 101

•

6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3

• • • • •

d1 (h8)

0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930

• • • • • • •

Size Ref.

HSS Co

Tech Info

Vc Page #: 479 

D163 A0418

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber, DHJ

Carbide Drills

Brocas Jobber, DHJ

Forets queue cylindrique haute performance DHJ

HSS Drills

Punte da trapano, DHJ

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 479  Size Ref.

DIN Taps

d1 (h8)

Carbide Endmills

1220 1230 1240 1250 1260 1270 1280 1290 1300 1350 1400 1450 1500 1550 1600

HSS Endmills

12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0 13.5 14.0 14.5 15.0 15.5 16.0

151

101

Pieces

151

101

151

101

151

101

151

101

151

101

151

101

151

101

151

101

160

108

160

108

169

114

169

114

178

120

178

120

Item #

Size Ref.

d1 (h8)

D163 A0418 HSS Co TiAlN

NH R40 130° Form B -

Item #

D163 1220 • • D163 1250 • D163 1270 • • D163 1300 D163 1350 D163 1400 D163 1450 D163 1500 D163 1550 D163 1600

Reamers P 5

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• Available on request as special manufacture. Subject to lead time.

•

• • • • •

• • • • • • •

D163

• • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber, DXJ

Carbide Drills

Brocas Jobber, DXJ

• High performance drill • Suitable for materials up to 850N/mm² • Special point geometry with radius cutting lips • Produces short chips • TiAlN for longer tool life

• Broca de alto rendimiento • Adecuado para materiales de hasta 800N/mm² • Geometría de punta especial con labios de corte radial • Produce virutas cortas • TiAlN para una mayor vida útil de la herramienta

Forets queue cylindrique haute performance DXJ • Forets Haute Performance • Utilisable dans les matériaux jusqu’à 850N/mm² • Affûtage spécial avec rayon de coupe en bout • Produit des copeaux courts • Revêtement TiAlN pour une meilleure durée de vie

HSS Drills

Punte da trapano, DXJ

ISO Taps

• Punta ad alta prestazione • Ideale per materiali fino a 850N/mm² • Geometria di punta speciale con labbro di rinforzo tagliente • Produce trucioli piccoli • TiAlN per massimizzare vita utensile

Item #

Size Ref.

• • • • D165 0300 D165 0310 D165 0320 D165 0330 D165 0340 D165 0350 D165 0360 D165 0370 D165 0380 D165 0390 D165 0400 D165 0410 D165 0420 D165 0430 D165 0440 D165 0450 D165 0460 D165 0470 D165 0480 D165 0490 D165 0500 D165 0510 D165 0520 D165 0530

0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810

P 2

M 8

• • • • • • • •

D165

5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1

Item #

101

109

117

D165 0540 D165 0550 D165 0560 D165 0570 D165 0580 D165 0590 D165 0600 D165 0610 D165 0620 D165 0630 D165 0640 D165 0650 D165 0660 D165 0670 D165 0680 D165 0690 D165 0700 D165 0710 D165 0720 D165 0730 D165 0740 D165 0750 D165 0760 D165 0770 D165 0780 D165 0790 D165 0800 D165 0810 S

Tool Holding

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

ISO VDI 3323

d1 (h8)

DIN Taps

l2 13

R35 130° Form A

Carbide Endmills

l1 34

HSS Endmills

1.0 1.5 2.0 2.5 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3

TiAlN

• • • • • • • • •

d1 (h8)

0100 0150 0200 0250 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530

• •

Size Ref.

HSS Co

Tech Info

Vc Page #: 479 

D165 A0418

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber, DXJ Brocas Jobber, DXJ

Carbide Drills

• High performance drill • Suitable for materials up to 850N/mm² • Special point geometry with radius cutting lips • Produces short chips • TiAlN for longer tool life

Forets queue cylindrique haute performance DXJ

HSS Drills

• Forets Haute Performance • Utilisable dans les matériaux jusqu’à 850N/mm² • Affûtage spécial avec rayon de coupe en bout • Produit des copeaux courts • Revêtement TiAlN pour une meilleure durée de vie

Punte da trapano, DXJ

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 479 

HSS Endmills Reamers

Item #

Size Ref.

Range

117

125

1200 1220 1250 1280 1300

12.0 12.2 12.5 12.8 13.0

125

133

142

D165 0820 D165 0830 D165 0840 D165 0850 D165 0860 D165 0870 D165 0880 D165 0890 D165 0900 D165 0910 D165 0920 D165 0930 D165 0940 D165 0950 D165 0960 D165 0970 D165 0980 D165 0990 D165 1000 D165 1010 D165 1020 D165 1050 D165 1080 D165 1100 D165 1110 D165 1120 D165 1150 D165 1180

D165

M 8

• • • • • • • •

Tech Info

ISO VDI 3323

101

151

101

151

101

151

101

151

101

TiAlN

WN R35 130° Form A -

Item # D165 1200 D165 1220 D165 1250 D165 1280 D165 1300

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

Pieces 151

HSS Co

• • • • • • • • •

Carbide Endmills

8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.5 10.8 11.0 11.1 11.2 11.5 11.8

•

DIN Taps

d1 (h8)

0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930 0940 0950 0960 0970 0980 0990 1000 1010 1020 1050 1080 1100 1110 1120 1150 1180

• •

Size Ref.

D165 A0418

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index 95

Drills Jobber, R40 UNI

Carbide Drills

Punta da trapano, R40 UNI

• SPM offers superior performance • Suitable for production drilling as an alternative to carbide drills • Suitable for materials up to 1500N/mm² • Point geometry ensures high strength & short chips • Endmill shank for greater accuracy • TiAlN for longer tool life

• SPM offre una prestazione superiore • Ideale per foratura di produzione come alternativa al metallo duro • Ideale per materiali fino a 1500N/mm² • Geometria di punta per garantire un’elevata resistenza e trucioli corti • Precisione gambo di attacco paritetica a Gambo Frese • TiAlN per massimizzare vita utensile

Brocas Jobber, R40 UNI

• SPM ofrece un rendimiento superior • Adecuado para taladrado de producción como alternativa a las brocas de metal duro • Adecuado para materiales de hasta 1500N/mm² • La geometría de la punta garantiza alta resistencia y virutas cortas • Mango de mayor precisión • TiAlN para una mayor vida útil de la herramienta

ISO Taps

• Substrat SPM pour une meilleure performance • Adapté à la production de masse, une alternative au foret carbure • Utilisable dans les matériaux jusqu’à 1500N/mm² et les • Super Alliages • Affûtage 4 faces, pour un meilleur centrage, produit des copeaux courts • Queue cylindrique de plus gros diamètre pour une meilleure stabilité • Revêtement TiAlN pour une meilleure durée de vie

HSS Drills

Forets queue cylindrique haute performance Hélice 40° universel

Size Ref.

D168 0100 D168 0110 D168 0120 D168 0130 D168 0140 D168 0150 D168 0160 D168 0170 D168 0180 D168 0190 D168 0200 D168 0210 D168 0220 D168 0230 D168 0240 D168 0250 D168 0260 D168 0270 D168 0280 D168 0290 D168 0300 D168 0310 D168 0320 D168 0330 D168 0340 D168 0350 D168 0360 D168 0370

0380 0390 0400 0410 0420 0430 0440 0450 0460 0465 0470 0480 0490 0500 0510 0520 0530 0540 0550 0555 0560 0570 0580 0590 0600 0610 0620 0630

M 8

Item #

101

D168 0380 D168 0390 D168 0400 D168 0410 D168 0420 D168 0430 D168 0440 D168 0450 D168 0460 D168 0465 D168 0470 D168 0480 D168 0490 D168 0500 D168 0510 D168 0520 D168 0530 D168 0540 D168 0550 D168 0555 D168 0560 D168 0570 D168 0580 D168 0590 D168 0600 D168 0610 D168 0620 D168 0630

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D168

3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.65 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.55 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

ISO VDI 3323

d1 (h8)

DIN Taps

Item #

Carbide Endmills

HSS Endmills

l2 12

Reamers

l1 41

•

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7

•

d1 (h8)

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370

•

Size Ref.

Tech Info

Vc Page #: 479 

Tool Holding

D168 Catalogue Code A1502 Discount Group SPM Material TiAlN Surface Finish Sutton Designation UNI R40 Geometry Point Type 130° 4 Facet Form B h7 Shank Tolerance

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber, R40 UNI Punta da trapano, R40 UNI

Carbide Drills

Forets queue cylindrique haute performance Hélice 40° universel

HSS Drills

Brocas Jobber, R40 UNI

ISO Taps

h7 Tool Holding

D168 Catalogue Code A1502 Discount Group SPM Material TiAlN Surface Finish Sutton Designation UNI R40 Geometry Point Type 130° 4 Facet Form B h7 Shank Tolerance

Vc Page #: 479 

Reamers

Item #

Size Ref.

101

109

117

125

D168 0640 D168 0650 D168 0660 D168 0670 D168 0680 D168 0690 D168 0700 D168 0710 D168 0720 D168 0730 D168 0740 D168 0750 D168 0760 D168 0770 D168 0780 D168 0790 D168 0800 D168 0810 D168 0820 D168 0830 D168 0840 D168 0850 D168 0860 D168 0870 D168 0880 D168 0890 D168 0900 D168 0910

0920 0930 0940 0950 0955 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180

D168

M 8

Item #

125

133

142

D168 0920 D168 0930 D168 0940 D168 0950 D168 0955 D168 0960 D168 0970 D168 0980 D168 0990 D168 1000 D168 1010 D168 1020 D168 1030 D168 1040 D168 1050 D168 1060 D168 1070 D168 1080 D168 1090 D168 1100 D168 1110 D168 1120 D168 1130 D168 1140 D168 1150 D168 1160 D168 1170 D168 1180

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

9.2 9.3 9.4 9.5 9.55 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

d1 (h8)

•

HSS Endmills

l1 101

•

Carbide Endmills

6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1

•

DIN Taps

d1 (h8)

0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910

•

Size Ref.

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber, R40 UNI

Carbide Drills

Punta da trapano, R40 UNI

Brocas Jobber, R40 UNI

ISO Taps

HSS Drills

Forets queue cylindrique haute performance Hélice 40° universel

Size Ref.

101

109

117

125

0920 0930 0940 0950 0955 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180

M 8

Item #

125

133

142

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D168

9.2 9.3 9.4 9.5 9.55 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

ISO VDI 3323

d1 (h8)

DIN Taps

Item #

Carbide Endmills

HSS Endmills

l2 63

Reamers

l1 101

•

6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1

•

d1 (h8)

0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910

•

Size Ref.

Tech Info

Vc Page #: 479 

Tool Holding

D168 Catalogue Code A1502 Discount Group SPM Material TiAlN Surface Finish Sutton Designation UNI R40 Geometry Point Type 130° 4 Facet Form B h7 Shank Tolerance

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber, R40 UNI Punta da trapano, R40 UNI

Carbide Drills

Forets queue cylindrique haute performance Hélice 40° universel

HSS Drills

Brocas Jobber, R40 UNI

ISO Taps

h7 Tool Holding

D168 Catalogue Code A1502 Discount Group SPM Material TiAlN Surface Finish Sutton Designation UNI R40 Geometry Point Type 130° 4 Facet Form B h7 Shank Tolerance

Vc Page #: 479 

Reamers

Item #

101

151

101

151

101

151

101

151

101

151

101

151

101

151

101

151

101

151

101

151

101

151

101

160

108

160

108

169

114

169

114

178

120

178

120

184

125

184

125

191

130

191

130

198

135

198

135

205

140

205

140

D168 1190 D168 1200 D168 1210 D168 1220 D168 1230 D168 1240 D168 1250 D168 1260 D168 1270 D168 1280 D168 1290 D168 1300 D168 1350 D168 1400 D168 1450 D168 1500 D168 1550 D168 1600 D168 1650 D168 1700 D168 1750 D168 1800 D168 1850 D168 1900 D168 1950 D168 2000

D168

M 8

Item #

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

d1 (h8)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

Size Ref.

•

HSS Endmills

l1 151

•

Carbide Endmills

11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0

•

DIN Taps

d1 (h8)

1190 1200 1210 1220 1230 1240 1250 1260 1270 1280 1290 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000

•

Size Ref.

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Jobber, R40 UNI, IK

Forets queue cylindrique haute performance Hélice 40° universel, arrosage central

Brocas Jobber, R40 UNI, IK

Carbide Drills

• Alternative to carbide where application lacks rigidity • Coolant fed directly to the cutting edges to help evacuate the swarf from the hole • For use in CNC machines with through spindle coolant supply • Endmill shank for greater accuracy • TiAlN for longer tool life

• Alternativa al metal duro, donde la aplicación carece de rigidez • Refrigeración interior, directamente al filo de corte, para ayudar • a evacuar la viruta del agujero • Para uso en máquinas CNC con suministro de refrigeración • a través del husillo • Mango de mayor precisión • TiAlN para una mayor vida útil de la herramienta

• Alternative au carbure, adapté au manque de stabilité • Arrosage interne pour une meilleure évacuaton copeaux • Utilisation sur machine CN avec arrosage centre broche • Queue cylindrique de plus gros diamètre pour une meilleure stabilité • Revêtement TiAlN pour une meilleure durée de vie

HSS Drills

Punte da trapano, R40 UNI, IK

ISO Taps

• Alternativa al metello duro in caso di scarsa rigidità • Reffrigerazione diretta sul tagliente per aiutare l’evaquazione truciolo • Usare su CNC su mandrino con passaggio di refrigerazione interna • Precisione gambo di attacco paritetica a Gambo Frese • TiAlN per massimizzare vita utensile

Item #

Size Ref.

D182 0500 • D182 0520 • • D182 0550 • • D182 0580 D182 0590 D182 0600 • • • • D182 0650 • D182 0670 D182 0680 • D182 0700 • D182 0720 • • D182 0750 • •

0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930 0940 0950 0960 0970 0980 0990 1000 1020 1050 1100 1150 1200

ISO

D182

M 8

7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.2 10.5 11.0 11.5 12.0

Item #

103

122

D182 0780 • D182 0800 D182 0810 D182 0820 • • D182 0850 D182 0860 D182 0870 D182 0880 • D182 0900 • • D182 0930 • D182 0950 D182 0960 • • D182 0990 D182 1000 D182 1020 D182 1050 D182 1100 D182 1150 D182 1200

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

VDI 3323

d1 (h8)

DIN Taps

Carbide Endmills

l2 44

HSS Endmills

l1 82

Reamers

5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

d1 (h8)

0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770

• • • • • • • • • • • •

Size Ref.

Tech Info

Vc Page #: 479 

Tool Holding

D182 Catalogue Code A1502 Discount Group HSS Co Material TiAlN Surface Finish Sutton Designation NH R40 IK Geometry Point Type 130° 4 Facet Form B Form E Shank Form (DIN 1835)

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Back to index Contents

Drills Jobber, R40 UNI, IK

Carbide Drills

Forets queue cylindrique haute performance Hélice 40° universel, arrosage central

Brocas Jobber, R40 UNI, IK

• Alternativa al metal duro, donde la aplicación carece de rigidez • Refrigeración interior, directamente al filo de corte, para ayudar a evacuar la viruta del agujero • Para uso en máquinas CNC con suministro de refrigeración • a través del husillo • Mango de mayor precisión • TiAlN para una mayor vida útil de la herramienta

HSS Drills

Punte da trapano, R40 UNI, IK

ISO Taps

HE Tool Holding

D182 Catalogue Code A1502 Discount Group HSS Co Material TiAlN Surface Finish Sutton Designation NH R40 IK Geometry Point Type 130° 4 Facet Form B Form E Shank Form (DIN 1835)

Vc Page #: 479  Size Ref.

DIN Taps

d1 (h8)

Carbide Endmills HSS Endmills

1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 2400

12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0

134

150

100

150

100

150

100

150

100

162

122

162

122

162

122

162

122

176

124

176

124

176

124

176

124

207

145

207

145

207

145

207

145

207

145

207

145

207

145

207

145

Item #

Size Ref.

D182 1250 D182 1300 D182 1350 D182 1400 D182 1450 D182 1500 D182 1550 D182 1600 D182 1650 D182 1700 D182 1750 D182 1800 D182 1850 D182 1900 D182 1950 D182 2000 D182 2050 D182 2100 D182 2150 D182 2200 D182 2250 D182 2300 D182 2350 D182 2400

d1 (h8)

Item #

Reamers

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

• • • • • • • • • • • •

D182

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

100

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

• Short flute length jobber drill • Cost effective solution for austenitic stainless steels and soft materials • Unique stepped core for excellent penetration • TiAlN tip for good wear resistance

Carbide Drills

Drills Jobber, R40, InOx watch the video

Forets queue cylindrique, Hélice 40°, Inox

HSS Drills

• Courte longueur taillée • Solution économique et performante pour les inox et matériaux tendres • Affûtage et design pour une pénétration facile • Revêtement TiAlN tip en bout pour une meilleure résistance

Punte da trapano, R40, InOx

• Punta dal tagliente corto • Soluzione economica per acciai inossidabili , austinitici e materiali morbidi • Formazione del nocciolo a gradini che la rende unica con prestazioni eccellenti • TiAlN per garantire un’ottima resistenza all’usura

Brocas Jobber, R40 UNI, InOx

• •

• • • •

D180

M 8

Size Ref.

0476 0480 0490 0500 0510 0516 0520 0525 0530 0540 0550 0556 0560 0570 0575 0580 0590 0595 0600 0610 0620 0625 0630 0635 0640 0650 0660 0670 0675 0680

d1 (h8)

4.76 3/16 86 86 4.8 86 4.9 86 5.0 86 5.1 5.16 13/64 86 86 5.2 86 5.25 86 5.3 93 5.4 93 5.5 5.56 7/32 93 93 5.6 93 5.7 93 5.75 93 5.8 93 5.9 5.95 15/64 93 93 6.0 101 6.1 101 6.2 101 6.25 101 6.3 6.35 1/4 101 101 6.4 101 6.5 101 6.6 101 6.7 6.75 17/64 101 109 6.8 N

Item #

• D180 0480 D180 0490 D180 0500 D180 0510 • D180 0520 D180 0525 D180 0530 D180 0540 D180 0550 • D180 0560 D180 0570 D180 0575 D180 0580 D180 0590 • D180 0600 D180 0610 D180 0620 D180 0625 D180 0630 • D180 0640 D180 0650 D180 0660 D180 0670 D180 0675 D180 0680

32 32 32 32 32 32 32 32 36 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 45 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

ISO VDI 3323

Item # D180 0100 D180 0150 D180 0200 D180 0250 D180 0300 D180 0310 • D180 0320 D180 0325 D180 0330 D180 0340 D180 0350 • D180 0360 D180 0370 D180 0375 D180 0380 D180 0390 • D180 0400 D180 0410 D180 0420 D180 0425 D180 0430 • D180 0440 D180 0450 D180 0460 D180 0470 D180 0475

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

130° 10 (5 > 7.5mm)

Carbide Endmills

l1 34

•

d1 (h8)

VA R40

HSS Endmills

1.0 1.5 2.0 2.5 3.0 3.1 3.18 1/8 3.2 3.25 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.75 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.25 4.3 4.37 11/64 4.4 4.5 4.6 4.7 4.75

• • • •

0100 0150 0200 0250 0300 0310 0318 0320 0325 0330 0340 0350 0357 0360 0370 0375 0380 0390 0397 0400 0410 0420 0425 0430 0437 0440 0450 0460 0470 0475

• • • • •

Size Ref.

HSS TiAlN Tip

Reamers

Vc Page #: 479 

D180 A0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Tool Holding

ISO Taps

• Longitud jobber de hélice corta • Solución rentable para aceros inoxidables austeníticos y materiales blandos • Núcleo escalonado para una excelente penetración • Punta TiAlN para mayor resistencia al desgaste

101

Back to index Contents

Drills Jobber, R40, InOx

Carbide Drills

watch the video

Forets queue cylindrique, Hélice 40°, Inox

HSS Drills

Punte da trapano, R40, InOx

Brocas Jobber, R40 UNI, InOx

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479 

Tech Info

45 45 45 45 45 45 45 45 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 57 57 57 57 57 8

Size Ref.

d1 (h8)

125 0900 9.0 125 0910 9.1 0913 9.13 23/64 125 125 0920 9.2 125 0925 9.25 125 0930 9.3 125 0940 9.4 125 0950 9.5 0953 9.53 3/8 133 133 0960 9.6 133 0970 9.7 133 0975 9.75 133 0980 9.8 133 0990 9.9 0992 9.92 25/64 133 133 1000 10.0 133 1010 10.1 133 1020 10.2 133 1025 10.25 133 1030 10.3 1032 10.32 13/32 133 133 1040 10.4 133 1050 10.5 133 1060 10.6 142 1070 10.7 1072 10.72 27/64 142 142 1075 10.75 142 1080 10.8 142 1090 10.9 142 1100 11.0

l2 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 71 71 71 71 71 71

HSS TiAlN Tip

VA R40 130° 5

Item # D180 0900 D180 0910 • D180 0920 D180 0925 D180 0930 D180 0940 D180 0950 • D180 0960 D180 0970 D180 0975 D180 0980 D180 0990 • D180 1000 D180 1010 D180 1020 D180 1025 D180 1030 • D180 1040 D180 1050 D180 1060 D180 1070 • D180 1075 D180 1080 D180 1090 D180 1100

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

Reamers

Item # D180 0690 D180 0700 D180 0710 • D180 0720 D180 0725 D180 0730 D180 0740 D180 0750 • D180 0760 D180 0770 D180 0775 D180 0780 D180 0790 • D180 0800 D180 0810 D180 0820 D180 0825 D180 0830 • D180 0840 D180 0850 D180 0860 D180 0870 • D180 0875 D180 0880 D180 0890

•

HSS Endmills

D180

• •

Carbide Endmills

VDI 3323

l2 45

• • • •

109 6.9 109 7.0 109 7.1 7.14 9/32 109 109 7.2 109 7.25 109 7.3 109 7.4 109 7.5 7.54 19/64 117 117 7.6 117 7.7 117 7.75 117 7.8 117 7.9 7.94 5/16 117 117 8.0 117 8.1 117 8.2 117 8.25 117 8.3 8.33 21/64 117 117 8.4 117 8.5 125 8.6 125 8.7 8.73 11/32 125 125 8.75 125 8.8 125 8.9

• • • •

DIN Taps

102

d1 (h8)

0690 0700 0710 0714 0720 0725 0730 0740 0750 0754 0760 0770 0775 0780 0790 0794 0800 0810 0820 0825 0830 0833 0840 0850 0860 0870 0873 0875 0880 0890

• • • • •

Size Ref.

D180 A0402

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Drills Jobber, R40, InOx watch the video

Forets queue cylindrique, Hélice 40°, Inox

HSS Drills

Punte da trapano, R40, InOx

Brocas Jobber, R40 UNI, InOx

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 479 

71 71 71 71 71 71 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 M

Item #

Carbide Endmills

HSS Endmills

DIN Taps

d1 (h8)

130° 10 (5 > 7.5mm)

Reamers

Size Ref.

VA R40

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • •

D180

71 71

ISO VDI 3323

Item # D180 1110 • D180 1120 D180 1125 D180 1130 D180 1140 D180 1150 • D180 1160 D180 1170 D180 1175 D180 1180 D180 1190 • D180 1200 D180 1210 D180 1220 D180 1225 D180 1230 • D180 1240 D180 1250 D180 1260 D180 1270 • D180 1275 D180 1280 D180 1290 D180 1300

HSS TiAlN Tip

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

l2 71

•

• • • •

d1 (h8)

142 1110 11.1 1111 11.11 7/16 142 142 1120 11.2 142 1125 11.25 142 1130 11.3 142 1140 11.4 142 1150 11.5 1151 11.51 29/64 142 142 1160 11.6 142 1170 11.7 142 1175 11.75 142 1180 11.8 142 1190 11.9 1191 11.91 15/32 151 151 1200 12.0 151 1210 12.1 151 1220 12.2 151 1225 12.25 151 1230 12.3 1230 12.3 31/64 151 151 1240 12.4 151 1250 12.5 151 1260 12.6 151 1270 12.7 1270 12.7 1/2 151 151 1275 12.75 151 1280 12.8 151 1290 12.9 151 1300 13.0

• • • • •

Size Ref.

D180 A0402

Tool Holding

ISO Taps

103

Back to index Contents

Drills Jobber, R40 VA, Black Magic

Carbide Drills

• High performance drill • Excellent solution for austenitic stainless steels and most long chipping materials • Optimised geometry ensures no work hardening and high productivity • Endmill shank for greater accuracy • TiAlN for longer tool life

watch the video

Forets queue cylindrique haute performance Hélice 40° VA, Black Magic

104

Punte da trapano, R40 VA, Black Magic

• Punta ad alta prestazione • eccellente soluzione per acciai inossidalili e materiale di scarsa truciolabilità • Geometria ottimizzata per lavorare intensamente ad alta produttività • Precisione gambo di attacco paritetica a Gambo Frese • TiAlN per massimizzare vita utensile

ISO Taps

Brocas Jobber, R40 UNI, VA, Black Magic

• Broca de alto rendimiento • Excelente solución para aceros inoxidables austeníticos y la mayoría de los materiales de viruta larga • La geometría optimizada que garantiza una alta productividad • Mango de mayor precisión • TiAlN para una mayor vida útil de la herramienta

h7 Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 479  2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.8 3.9 3.97 5/32 4.0 4.1 4.2 4.3 4.37 11/64

Point Angle

130°

120°

M 8

d1 (h8)

80 4.4 80 4.5 80 4.6 80 4.65 80 4.7 4.76 3/16 86 86 4.8 86 4.9 86 5.0 86 5.1 5.16 13/64 86 86 5.2 86 5.3 93 5.4 93 5.5 93 5.55 5.56 7/32 93 93 5.6 93 5.7 93 5.8 93 5.9 5.95 15/64 93 93 6.0 101 6.1 101 6.2 101 6.3 6.35 1/4 101 101 6.4 N

120°

HSS Co TiAlN

VA R40 4 Facet Form C h7

Item # D169 0440 D169 0450 D169 0460 D169 0465 D169 0470 D169 0476 D169 0480 D169 0490 D169 0500 D169 0510 D169 0516 D169 0520 D169 0530 D169 0540 D169 0550 D169 0555 D169 0556 D169 0560 D169 0570 D169 0580 D169 0590 D169 0595 D169 0600 D169 0610 D169 0620 D169 0630 D169 0635 D169 0640 H

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• •

Tech Info

0440 0450 0460 0465 0470 0476 0480 0490 0500 0510 0516 0520 0530 0540 0550 0555 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640

•

Reamers

Size Ref.

•

HSS Endmills

D169

• •

Carbide Endmills

ISO VDI 3323

Item # D169 0200 D169 0210 D169 0220 D169 0230 D169 0240 D169 0250 D169 0260 D169 0270 D169 0280 D169 0290 D169 0300 D169 0310 D169 0318 D169 0320 D169 0330 D169 0340 D169 0350 D169 0357 D169 0360 D169 0370 D169 0380 D169 0390 D169 0397 D169 0400 D169 0410 D169 0420 D169 0430 D169 0437

• • • •

d1 (h8)

• • • •

DIN Taps

104

0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437

• • • • •

Size Ref.

Point Angle

D169 A1502

•

HSS Drills

• Forets Haute Performance • Excellente sollution pour les Inox et matériaux à copeaux longs • Géométrie optimisée pour réduire les efforts • Queue cylindrique de plus gros diamètre pour une meilleure stabilité • TiAlN for longer tool life

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Carbide Drills

Drills Jobber, R40 VA, Black Magic watch the video

Forets queue cylindrique haute performance Hélice 40° VA, Black Magic

HSS Drills

Punte da trapano, R40 VA, Black Magic

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

120°

120° M

Size Ref.

0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0955 0960 0970 0980 0990 0992 1000 1010 1020 1030 1032 1040 1050 1060 1070 1072

d1 (h8)

125 8.7 8.73 11/32 125 125 8.8 125 8.9 125 9.0 125 9.1 9.13 23/64 125 125 9.2 125 9.3 125 9.4 125 9.5 9.52 3/8 133 133 9.55 133 9.6 133 9.7 133 9.8 133 9.9 9.92 25/64 133 133 10.0 133 10.1 133 10.2 133 10.3 10.32 13/32 133 133 10.4 133 10.5 133 10.6 142 10.7 10.72 27/64 142 N

120°

Form

Item # D169 0870 D169 0873 D169 0880 D169 0890 D169 0900 D169 0910 D169 0913 D169 0920 D169 0930 D169 0940 D169 0950 D169 0953 D169 0955 D169 0960 D169 0970 D169 0980 D169 0990 D169 0992 D169 1000 D169 1010 D169 1020 D169 1030 D169 1032 D169 1040 D169 1050 D169 1060 D169 1070 D169 1072

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

Item # D169 0650 D169 0660 D169 0670 D169 0676 D169 0680 D169 0690 D169 0700 D169 0710 D169 0714 D169 0720 D169 0730 D169 0740 D169 0750 D169 0754 D169 0755 D169 0760 D169 0770 D169 0780 D169 0790 D169 0794 D169 0800 D169 0810 D169 0820 D169 0830 D169 0833 D169 0840 D169 0850 D169 0860

4 Facet Form C

Carbide Endmills

Form

VA R40

HSS Endmills

120°

TiAlN

•

Point Angle

• •

• • • •

D169

•

ISO VDI 3323

l2 63

•

• • • •

d1 (h8)

101 6.5 101 6.6 101 6.7 6.75 17/64 109 109 6.8 109 6.9 109 7.0 109 7.1 7.14 9/32 109 109 7.2 109 7.3 109 7.4 109 7.5 7.54 19/64 117 117 7.55 117 7.6 117 7.7 117 7.8 117 7.9 7.94 5/16 117 117 8.0 117 8.1 117 8.2 117 8.3 8.33 21/64 117 117 8.4 117 8.5 125 8.6

•

0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740 0750 0754 0755 0760 0770 0780 0790 0794 0800 0810 0820 0830 0833 0840 0850 0860

• • • • •

Size Ref.

Point Angle

HSS Co

Reamers

Vc Page #: 479 

D169 A1502

Tech Info

Tool Holding

ISO Taps

Brocas Jobber, R40 UNI, VA, Black Magic

105

Back to index Contents

Drills Jobber, R40 VA, Black Magic

Carbide Drills

watch the video

Forets queue cylindrique haute performance Hélice 40° VA, Black Magic

Punte da trapano, R40 VA, Black Magic

ISO Taps

Brocas Jobber, R40 UNI, VA, Black Magic

h7 Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 479 

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

101

120°

M 8

Item #

Size Ref.

D169 1080 D169 1090 D169 1100 D169 1110 D169 1111 D169 1120 D169 1130 D169 1140 D169 1150 D169 1151 D169 1160 D169 1170 D169 1180 D169 1190 D169 1191 D169 1200 D169 1210 D169 1220 D169 1230 D169 1231 D169 1240 D169 1250 D169 1260 D169 1270 D169 1269 D169 1280 D169 1290 D169 1300

1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000

d1 (h8)

13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0

HSS Co TiAlN

VA R40 4 Facet Form C h7

Point Angle

Form

Item #

160

108

120°

160

108

120°

169

114

120°

169

114

120°

178

120

120°

178

120

120°

184

125

120°

184

125

120°

191

130

120°

191

130

120°

198

135

120°

198

135

120°

205

140

120°

205

140

120°

D169 1350 D169 1400 D169 1450 D169 1500 D169 1550 D169 1600 D169 1650 D169 1700 D169 1750 D169 1800 D169 1850 D169 1900 D169 1950 D169 2000

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• •

Tech Info

Form

•

Reamers

120°

•

HSS Endmills

• •

Carbide Endmills

D169

d2 12

ISO VDI 3323

l2 94

• • • •

d1 (h8)

142 10.8 142 10.9 142 11.0 142 11.1 11.11 7/16 142 142 11.2 142 11.3 142 11.4 142 11.5 11.51 29/64 142 142 11.6 142 11.7 142 11.8 151 11.9 11.91 15/32 151 151 12.0 151 12.1 151 12.2 151 12.3 12.3 31/64 151 151 12.4 151 12.5 151 12.6 151 12.7 12.7 1/2 151 151 12.8 151 12.9 151 13.0

• • • •

DIN Taps

106

1080 1090 1100 1110 1111 1120 1130 1140 1150 1151 1160 1170 1180 1190 1191 1200 1210 1220 1230 1231 1240 1250 1260 1270 1269 1280 1290 1300

• • • • •

Size Ref.

Point Angle

D169 A1502

•

HSS Drills

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Stub, Blu

Carbide Drills

• Rigid twist drill • Self centring point geometry • For use in automatic lathes & hand drilling machines

Forets queue cylindre court

• Forets rigide • Auto centrant • Pour utilisation sur tours automatique et machines à main

107

Punte Stub, Blu

HSS Drills

• Elica punta rigida • Geometria auto centrante • Progettata per uso con tornio automatico e foratrice manuale

Broca Stub, Blu

D186 Catalogue Code A1002 Discount Group HSS Material Blu Surface Finish Sutton Designation N R30 Geometry Point Type 118° Form C >3mm Order Quantity Bulk 10 (5 > 7.5mm)

P 3

M 8

0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730

d1 (h8) 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3

55 58 58 58 58 58 62 62 62 62 62 62 66 66 66 66 66 66 66 70 70 70 70 70 70 70 74 74 74 74 74 74

22 24 24 24 24 24 26 26 26 26 26 26 28 28 28 28 28 28 28 31 31 31 31 31 31 31 34 34 34 34 34 34

Item # D186 0420 D186 0430 D186 0440 D186 0450 D186 0460 D186 0470 D186 0480 D186 0490 D186 0500 D186 0510 D186 0520 D186 0530 D186 0540 D186 0550 D186 0560 D186 0570 D186 0580 D186 0590 D186 0600 D186 0610 D186 0620 D186 0630 D186 0640 D186 0650 D186 0660 D186 0670 D186 0680 D186 0690 D186 0700 D186 0710 D186 0720 D186 0730 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

Size Ref.

•

• • • • • • • •

D186

•

ISO VDI 3323

Item # D186 0100 D186 0110 D186 0120 D186 0130 D186 0140 D186 0150 D186 0160 D186 0170 D186 0180 D186 0190 D186 0200 D186 0210 D186 0220 D186 0230 D186 0240 D186 0250 D186 0260 D186 0270 D186 0280 D186 0290 D186 0300 D186 0310 D186 0320 D186 0330 D186 0340 D186 0350 D186 0360 D186 0370 D186 0380 D186 0390 D186 0400 D186 0410

Carbide Endmills

6 7 8 8 9 9 10 10 11 11 12 13 13 13 14 14 14 16 16 16 16 18 18 18 20 20 20 20 22 22 22 22

HSS Endmills

Reamers

l1 26 28 30 30 32 32 34 34 36 36 38 40 40 40 43 43 43 46 46 46 46 49 49 49 52 52 52 52 55 55 55 55

•

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1

• • • • • • • •

d1 (h8)

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410

• •

Size Ref.

Tech Info

Vc Page #: 478 

Tool Holding

ISO Taps

• Broca helicoidal rígida • Geometría de punta autocentrante • Para uso en tornos automáticos y máquinas de taladrado manuales

107

Back to index Contents

Drills Stub, Blu

Carbide Drills

• Rigid twist drill • Self centring point geometry • For use in automatic lathes & hand drilling machines

Forets queue cylindre court

• Forets rigide • Auto centrant • Pour utilisation sur tours automatique et machines à main

HSS Drills

Punte Stub, Blu

• Elica punta rigida • Geometria auto centrante • Progettata per uso con tornio automatico e foratrice manuale

Broca Stub, Blu

• Broca helicoidal rígida • Geometría de punta autocentrante • Para uso en tornos automáticos y máquinas de taladrado manuales

ISO Taps Tool Holding

D186 Catalogue Code A1002 Discount Group HSS Material Blu Surface Finish Sutton Designation N R30 Geometry Point Type 118° Form C >3mm Order Quantity Bulk 10 (5 > 7.5mm)

Vc Page #: 478 

D186

M 8

Size Ref.

1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180 1190 1200 1210 1220 1230 1240 1250 1260 1270 1280 1290 1300

d1 (h8) 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0

95 95 95 95 95 95 95 95 95 95 95 95 95 102 102 102 102 102 102 102 102 102 102 102 102

47 47 47 47 47 47 47 47 47 47 47 47 47 51 51 51 51 51 51 51 51 51 51 51 51

Item # D186 1060 D186 1070 D186 1080 D186 1090 D186 1100 D186 1110 D186 1120 D186 1130 D186 1140 D186 1150 D186 1160 D186 1170 D186 1180 D186 1190 D186 1200 D186 1210 D186 1220 D186 1230 D186 1240 D186 1250 D186 1260 D186 1270 D186 1280 D186 1290 D186 1300

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

Tech Info

ISO VDI 3323

Item # D186 0740 D186 0750 D186 0760 D186 0770 D186 0780 D186 0790 D186 0800 D186 0810 D186 0820 D186 0830 D186 0840 D186 0850 D186 0860 D186 0870 D186 0880 D186 0890 D186 0900 D186 0910 D186 0920 D186 0930 D186 0940 D186 0950 D186 0960 D186 0970 D186 0980 D186 0990 D186 1000 D186 1010 D186 1020 D186 1030 D186 1040 D186 1050

•

Reamers

l2 34 34 37 37 37 37 37 37 37 37 37 37 40 40 40 40 40 40 40 40 40 40 43 43 43 43 43 43 43 43 43 43

• • • • • • • •

HSS Endmills

l1 74 74 79 79 79 79 79 79 79 79 79 79 84 84 84 84 84 84 84 84 84 84 89 89 89 89 89 89 89 89 89 89

•

Carbide Endmills

7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5

• • • • • • • •

DIN Taps

108

d1 (h8)

0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930 0940 0950 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050

• •

Size Ref.

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Stub, Blu

Carbide Drills

• Rigid twist drill • Self centring point geometry • For use in automatic lathes & hand drilling machines

Forets queue cylindre court

• Forets rigide • Auto centrant • Pour utilisation sur tours automatique et machines à main

109

Punte Stub, Blu

HSS Drills

• Elica punta rigida • Geometria auto centrante • Progettata per uso con tornio automatico e foratrice manuale

Broca Stub, Blu

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

P 5

M 8

0326 3.26 #30 0409 4.09 #20 0485 4.85 #11

49 54 57

24 27 30

Item # D126 D126 0326 D126 0409 D126 0485

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• •

d1 (h8)

• •

• • • • • • • • • • • • • • • •

D100 D126

Size Ref.

Carbide Endmills

ISO VDI 3323

Item # D100 0159 D100 0198 D100 0238 D100 0278 D100 0318 D100 0357 D100 0397 D100 0437 D100 0476 D100 0516 D100 0556 D100 0595 D100 0635 D100 0676 D100 0714 D100 0754 D100 0794 D100 0833 D100 0873 D100 0913 D100 0953 D100 0992 D100 1032 D100 1072 D100 1111 D100 1151 D100 1191 D100 1231 D100 1269

118° Form C Bulk 10 (5 > 19/64)

HSS Endmills

l2 16 17 19 21 22 24 25 27 29 30 32 33 35 37 38 40 41 43 43 48 46 48 49 51 52 54 54 56 59

N R30

Reamers

l1 41 43 44 46 48 49 52 54 56 57 60 62 64 67 68 70 71 75 76 78 79 83 84 86 87 90 92 94 98

• • • • • • • • • • • • • • • •

d1 (h8)

Blu

Tech Info

1.59 1/16 1.98 5/64 2.38 3/32 2.78 7/64 3.18 1/8 3.57 9/64 3.97 5/32 4.37 11/64 4.76 3/16 5.16 13/64 5.56 7/32 5.95 15/64 6.35 1/4 6.76 17/64 7.14 9/32 7.54 19/64 7.94 5/16 8.33 21/64 8.73 11/32 9.13 23/64 9.53 3/8 9.92 25/64 10.32 13/32 10.72 27/64 11.11 7/16 11.51 29/64 11.91 15/32 12.31 31/64 12.70 1/2

• •

0159 0198 0238 0278 0318 0357 0397 0437 0476 0516 0556 0595 0635 0676 0714 0754 0794 0833 0873 0913 0953 0992 1032 1072 1111 1151 1191 1231 1269

• • • •

Size Ref.

HSS

DIN Taps

Vc Page #: 478 

D100 A1002

Tool Holding

ISO Taps

• Broca helicoidal rígida • Geometría de punta autocentrante • Para uso en tornos automáticos y máquinas de taladrado manuales

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

109

Back to index Contents

Drills Stub, CNC

Carbide Drills

Broca Stub, CNC

Forets queue cylindrique haute performance court CNC

HSS Drills

• Forets Haute Performance • Adaptés au matériaux jusqu’à 1200N/mm² • Affûtage 130° pour un parfait centrage • Taillage parabolique pour une meilleure évacuation copeaux • TiAlN for longer tool life

110

Punte Stub, CNC

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 478 

HSS Endmills Reamers

Point

Item #

Size Ref.

D151 0100 D151 0110 D151 0120 D151 0130 D151 0140 D151 0150 D151 0160 D151 0170 D151 0180 D151 0190 D151 0200 D151 0210 D151 0220 D151 0230 D151 0240 D151 0250 D151 0260 D151 0270 D151 0280 D151 0290 D151 0300 D151 0310 D151 0320 D151 0330 D151 0340 D151 0350 D151 0360 D151 0370

0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650

Tech Info

ISO VDI 3323

D151

M 8

d1 (h8) 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5

HSS Co TiAlN

NH R40 130° -

Item #

D151 0380 D151 0390 D151 0400 D151 0410 D151 0420 D151 0430 D151 0440 D151 0450 D151 0460 D151 0470 D151 0480 D151 0490 D151 0500 D151 0510 D151 0520 D151 0530 D151 0540 D151 0550 D151 0560 D151 0570 D151 0580 D151 0590 D151 0600 D151 0610 D151 0620 D151 0630 D151 0640 D151 0650 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

Carbide Endmills

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7

• • • • • • • • • • • • • • • • • • • • • •

DIN Taps

110

d1 (h8)

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370

• • • • • • •

Size Ref.

D151 A1006

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Stub, CNC

Carbide Drills

Broca Stub, CNC

Forets queue cylindrique haute performance court CNC

HSS Drills

Punte Stub, CNC

Item #

Size Ref.

D151 0660 D151 0670 D151 0680 D151 0690 D151 0700 D151 0710 D151 0720 D151 0730 D151 0740 D151 0750 D151 0760 D151 0770 D151 0780 D151 0790 D151 0800 D151 0810 D151 0820 D151 0830 D151 0840 D151 0850 D151 0860 D151 0870 D151 0880 D151 0890 D151 0900 D151 0910 D151 0920 D151 0930

0940 0950 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180 1190 1200 1210

ISO

D151

M 8

9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 12.1

Item #

102

D151 0940 D151 0950 D151 0960 D151 0970 D151 0980 D151 0990 D151 1000 • D151 1020 D151 1030 D151 1040 D151 1050 D151 1060 D151 1070 D151 1080 D151 1090 D151 1100 D151 1110 • D151 1130 D151 1140 D151 1150 • • D151 1180 • D151 1200 • S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • •

VDI 3323

d1 (h8)

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

l2 31

130°

Carbide Endmills

l1 70

NH R40

HSS Endmills

6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3

TiAlN

•

d1 (h8)

0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930

• • • • • • •

Size Ref.

HSS Co

Reamers

Vc Page #: 478 

D151 A1006

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Tool Holding

ISO Taps

111

Back to index Contents

Drills Stub, CNC

Carbide Drills

Broca Stub, CNC

Forets queue cylindrique haute performance court CNC

HSS Drills

Punte Stub, CNC

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 478 

HSS Endmills

Item #

102

107

111

115

119

123

127

131

D151 1220 • • D151 1250 • D151 1270 D151 1280 D151 1290 D151 1300 D151 1350 D151 1400 D151 1450 D151 1500 D151 1550 D151 1600 D151 1650 D151 1700 D151 1750 D151 1800 D151 1850 D151 1900 D151 1950 D151 2000

Reamers Tech Info

ISO VDI 3323

D151

M 8

Size Ref.

d1 (h8)

Pieces

HSS Co TiAlN

NH R40 130° -

Item #

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

Carbide Endmills

12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0

• • • • • • • • • • • • • • • • • • • • • •

DIN Taps

112

d1 (h8)

1220 1230 1240 1250 1260 1270 1280 1290 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000

• • • • • • •

Size Ref.

D151 A1006

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

113

Drills Stub, DXS

Carbide Drills

Broca Stub, DXS

• High performance drill • Suitable for materials up to 850N/mm² • Special point geometry with radius cutting lips • Produces short chips • TiAlN for longer tool life

Contents

Back to index

Forets queue cylindrique haute performance court DXS

HSS Drills

Punte Stub, DXS

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

P 2

M 8

• • • • • • • •

D177

Size Ref.

0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730

d1 (h8) 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3

55 58 58 58 58 58 62 62 62 62 62 62 66 66 66 66 66 66 66 70 70 70 70 70 70 70 74 74 74 74 74 74

22 24 24 24 24 24 26 26 26 26 26 26 28 28 28 28 28 28 28 31 31 31 31 31 31 31 34 34 34 34 34 34

Item # D177 0420 D177 0430 D177 0440 D177 0450 D177 0460 D177 0470 D177 0480 D177 0490 D177 0500 D177 0510 D177 0520 D177 0530 D177 0540 D177 0550 D177 0560 D177 0570 D177 0580 D177 0590 D177 0600 D177 0610 D177 0620 D177 0630 D177 0640 D177 0650 D177 0660 D177 0670 D177 0680 D177 0690 D177 0700 D177 0710 D177 0720 D177 0730 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

ISO VDI 3323

Item # D177 0100 D177 0110 D177 0120 D177 0130 D177 0140 D177 0150 D177 0160 D177 0170 D177 0180 D177 0190 D177 0200 D177 0210 D177 0220 D177 0230 D177 0240 D177 0250 D177 0260 D177 0270 D177 0280 D177 0290 D177 0300 D177 0310 D177 0320 D177 0330 D177 0340 D177 0350 D177 0360 D177 0370 D177 0380 D177 0390 D177 0400 D177 0410

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

6 7 8 8 9 9 10 10 11 11 12 13 13 13 14 14 14 16 16 16 16 18 18 18 20 20 20 20 22 22 22 22

Carbide Endmills

R35 130° Form A

HSS Endmills

l1 26 28 30 30 32 32 34 34 36 36 38 40 40 40 43 43 43 46 46 46 46 49 49 49 52 52 52 52 55 55 55 55

Reamers

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1

TiAlN

• • • • • • • • •

d1 (h8)

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410

• • •

Size Ref.

HSS Co

Tech Info

Vc Page #: 478 

D177 A1006

Tool Holding

ISO Taps

113

Back to index Contents

Drills Stub, DXS

Carbide Drills

• High performance drill • Suitable for materials up to 850N/mm² • Special point geometry with radius cutting lips • Produces short chips • TiAlN for longer tool life

Broca Stub, DXS

Forets queue cylindrique haute performance court DXS

HSS Drills

Punte Stub, DXS

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 478 

Reamers

l2 34 34 37 37 37 37 37 37 37 37 37 37 40 40 40 40 40 40 40 40 40 40 43 43 43 43 43 43 43 43 47 47

Tech Info

ISO VDI 3323

D177

M 8

Item #

Size Ref.

Range

D177 0740 D177 0750 D177 0760 D177 0770 D177 0780 D177 0790 D177 0800 D177 0810 D177 0820 D177 0830 D177 0840 D177 0850 D177 0860 D177 0870 D177 0880 D177 0890 D177 0900 D177 0910 D177 0920 D177 0930 D177 0940 D177 0950 D177 0960 D177 0970 D177 0980 D177 0990 D177 1000 D177 1010 D177 1020 D177 1050 D177 1080 D177 1100

1120 1150 1180 1200 1220 1250 1280 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000

11.2 11.5 11.8 12.0 12.2 12.5 12.8 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0

Pieces 95 95 95 102 102 102 102 102 107 107 111 111 115 115 119 119 123 123 127 127 131 131

HSS Co TiAlN

WN R35 130° Form A h9

Item # D177 1120 D177 1150 D177 1180 D177 1200 D177 1220 D177 1250 D177 1280 D177 1300 D177 1350 D177 1400 D177 1450 D177 1500 D177 1550 D177 1600 D177 1650 D177 1700 D177 1750 D177 1800 D177 1850 D177 1900 D177 1950 D177 2000

47 47 47 51 51 51 51 51 54 54 56 56 58 58 60 60 62 62 64 64 66 66

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • •

HSS Endmills

l1 74 74 79 79 79 79 79 79 79 79 79 79 84 84 84 84 84 84 84 84 84 84 89 89 89 89 89 89 89 89 95 95

•

Carbide Endmills

7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.5 10.8 11.0

• • • • • • • •

DIN Taps

114

d1 (m7)

0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930 0940 0950 0960 0970 0980 0990 1000 1010 1020 1050 1080 1100

• • •

Size Ref.

D177 A1006

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Stub, R40 UNI

Carbide Drills

Punte Stub, R40 UNI

Broca Stub, R40 UNI

115

ISO Taps

• Substrat SPM pour une meilleure performance • Adapté à la production de masse, une alternative au foret carbure • Utilisable dans les matériaux jusqu’à 1500N/mm² et les • Super Alliages • Affûtage 4 faces, pour un meilleur centrage, produit des • copeaux courts • Queue cylindrique de plus gros diamètre pour une meilleure stabilité • Revêtement TiAlN pour une meilleure durée de vie

HSS Drills

Forets queue cylindrique haute performance court, Hélice 40°, universel

Item #

Size Ref.

D155 0100 D155 0110 D155 0120 D155 0130 D155 0140 D155 0150 D155 0160 D155 0170 D155 0180 D155 0190 D155 0200 D155 0210 D155 0220 D155 0230 D155 0240 D155 0250 D155 0260 D155 0270 D155 0280 D155 0290 D155 0300 D155 0310 D155 0320 D155 0330 D155 0340 D155 0350 D155 0360 D155 0370

0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650

M 8

Item #

D155 0380 D155 0390 D155 0400 D155 0410 D155 0420 D155 0430 D155 0440 D155 0450 D155 0460 D155 0470 D155 0480 D155 0490 D155 0500 D155 0510 D155 0520 D155 0530 D155 0540 D155 0550 D155 0560 D155 0570 D155 0580 D155 0590 D155 0600 D155 0610 D155 0620 D155 0630 D155 0640 D155 0650

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • • • • • • • • • • • • • • • • •

D155

3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5

•

ISO VDI 3323

d1 (h8)

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

Carbide Endmills

HSS Endmills

l1 38

•

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7

•

d1 (h8)

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370

• • • •

Size Ref.

Reamers

Vc Page #: 478 

Tech Info

D155 Catalogue Code A1502 Discount Group SPM Material TiAlN Surface Finish Sutton Designation UNI R40 Geometry Point Type 130° 4 Facet Form B h7 Shank Tolerance

Tool Holding

115

Back to index Contents

Drills Stub, R40 UNI

Carbide Drills

Punte Stub, R40 UNI

Forets queue cylindrique haute performance court, Hélice 40°, universel

HSS Drills

• Substrat SPM pour une meilleure performance • Adapté à la production de masse, une alternative au foret carbure • Utilisable dans les matériaux jusqu’à 1500N/mm² et les • Super Alliages • Affûtage 4 faces, pour un meilleur centrage, produit des • copeaux courts • Queue cylindrique de plus gros diamètre pour une meilleure stabilité • Revêtement TiAlN pour une meilleure durée de vie

Broca Stub, R40 UNI

ISO Taps

h7 Tool Holding

D155 Catalogue Code A1502 Discount Group SPM Material TiAlN Surface Finish Sutton Designation UNI R40 Geometry Point Type 130° 4 Facet Form B h7 Shank Tolerance

Vc Page #: 478  d2

Item #

Size Ref.

D155 0660 D155 0670 D155 0680 D155 0690 D155 0700 D155 0710 D155 0720 D155 0730 D155 0740 D155 0750 D155 0760 D155 0770 D155 0780 D155 0790 D155 0800 D155 0810 D155 0820 D155 0830 D155 0840 D155 0850 D155 0860 D155 0870 D155 0880 D155 0890 D155 0900 D155 0910 D155 0920 D155 0930

0940 0950 0960 0970 0980 0990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180 1190 1200 1210

D155

M 8

9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 12.1

Item #

102

D155 0940 D155 0950 D155 0960 D155 0970 D155 0980 D155 0990 D155 1000 D155 1010 D155 1020 D155 1030 D155 1040 D155 1050 D155 1060 D155 1070 D155 1080 D155 1090 D155 1100 D155 1110 D155 1120 D155 1130 D155 1140 D155 1150 D155 1160 D155 1170 D155 1180 D155 1190 D155 1200 D155 1210

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

Tech Info

ISO VDI 3323

d1 (m7)

•

Reamers

l2 31

•

HSS Endmills

l1 70

•

Carbide Endmills

6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3

• • • • • • • • • • • • • • • • • • • • • • • • • •

DIN Taps

116

d1 (m7)

0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930

• • • •

Size Ref.

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Stub, R40 UNI

Carbide Drills

Punte Stub, R40 UNI

Broca Stub, R40 UNI

ISO Taps

• Substrat SPM pour une meilleure performance • Adapté à la production de masse, une alternative au foret carbure • Utilisable dans les matériaux jusqu’à 1500N/mm² et les Super Alliages • Affûtage 4 faces, pour un meilleur centrage, produit des copeaux courts • Queue cylindrique de plus gros diamètre pour une meilleure stabilité • Revêtement TiAlN pour une meilleure durée de vie

HSS Drills

Forets queue cylindrique haute performance court, Hélice 40°, universel

D155 Catalogue Code A1502 Discount Group SPM Material TiAlN Surface Finish Sutton Designation UNI R40 Geometry Point Type 130° 4 Facet Form B h7 Shank Tolerance l1

Item #

102

107

111

115

119

123

127

131

D155 1220 D155 1230 D155 1240 D155 1250 D155 1260 D155 1270 D155 1280 D155 1290 D155 1300 D155 1350 D155 1400 D155 1450 D155 1500 D155 1550 D155 1600 D155 1650 D155 1700 D155 1750 D155 1800 D155 1850 D155 1900 D155 1950 D155 2000

Item #

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

•

• • • • • • • • • • • • • • • • • • • • • • • • • •

D155

d1 (h8)

• • • •

ISO VDI 3323

Size Ref.

Reamers

12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0

Carbide Endmills

d1 (h8)

1220 1230 1240 1250 1260 1270 1280 1290 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000

HSS Endmills

Size Ref.

DIN Taps

Vc Page #: 478 

Tool Holding

117

Back to index Contents

Drills Stub, R40 VA Black Magic

Carbide Drills

Brocas Stub, R40 UNI, VA, Black Magic

watch the video

Forets queue cylindrique haute performance court, Hélice 40° VA, Black Magic

118

HSS Drills

Punte Stub, R40 VA Black Magic

ISO Taps

• Punta ad alta prestazione • Eccellente soluzione per acciai inossidalili e materiale di scarsa truciolabilità • Geometria ottimizzata per lavorare intensamente ad alta produttività • Precisione gambo di attacco paritetica a Gambo Frese • TiAlN per massimizzare vita utensile

h7 Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 478 

140°

3.5

140°

4.5

140°

5.5

140°

5.5

140°

130°

M 8

0210 0220 0226 0230 0240 0250 0260 0270 0276 0280 0285 0290 0300 0310 0318 0320 0330 0340 0350 0357 0360 0370 0378 0380 0390 0397 0400 0410

d1 (h8)

2.1 2.2 2.26 2.3 2.4 2.5 2.6 2.7 2.76 2.8 2.85 2.9 3.0 3.1 3.18 1/8 3.2 3.3 3.4 3.5 3.57 9/64 3.6 3.7 3.78 3.8 3.9 3.97 5/32 4.0 4.1 N

130°

120°

HSS Co TiAlN

VA R40 4 Facet h7

Item # D153 0210 D153 0220 • D153 0230 D153 0240 D153 0250 D153 0260 D153 0270 • D153 0280 D153 0285 D153 0290 D153 0300 D153 0310 D153 0318 D153 0320 D153 0330 D153 0340 D153 0350 D153 0357 D153 0360 D153 0370 D153 0378 D153 0380 D153 0390 D153 0397 D153 0400 D153 0410

130°

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

Available in 0.01mm sizes up to 6.0mm on request • Available on request as special manufacture. Subject to lead time.

•

D153

Size Ref.

Point Angle

• •

Tech Info

ISO VDI 3323

Item # D153 0050 D153 0060 D153 0070 D153 0080 • D153 0090 D153 0100 • D153 0110 D153 0120 • D153 0130 • • D153 0140 • • • D153 0150 • D153 0160 D153 0170 D153 0180 • D153 0190 D153 0195 D153 0200 •

• •

Reamers

•

HSS Endmills

• •

Carbide Endmills

l1 38

• • • •

d1 (h8)

0.5 0.6 0.7 0.8 0.86 0.9 1.0 1.06 1.1 1.2 1.26 1.3 1.35 1.38 1.4 1.42 1.46 1.48 1.5 1.53 1.6 1.7 1.8 1.83 1.9 1.95 2.0 2.09

• • • •

DIN Taps

118

0050 0060 0070 0080 0086 0090 0100 0106 0110 0120 0126 0130 0135 0138 0140 0142 0146 0148 0150 0153 0160 0170 0180 0183 0190 0195 0200 0209

• • • • •

Size Ref.

Point Angle

D153 A1502

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Stub, R40 VA Black Magic

Carbide Drills

Brocas Stub, R40 UNI, VA, Black Magic

watch the video

Forets queue cylindrique haute performance court, Hélice 40° VA, Black Magic

HSS Drills

Punte Stub, R40 VA Black Magic

ISO Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance 6

120°

Item # D153 0600 D153 0610 D153 0620 D153 0630 D153 0635 D153 0640 D153 0650 D153 0660 D153 0670 D153 0676 D153 0680 D153 0690 D153 0700 D153 0710 D153 0714 D153 0720 D153 0730 D153 0740 D153 0750 D153 0754 D153 0755 D153 0760 D153 0770 D153 0780 D153 0790 D153 0794 D153 0800 D153 0810

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

Available in 0.01mm sizes up to 6.0mm on request

•

l1 66

• •

d1 (h8)

6.0 6.1 6.2 6.3 6.35 1/4 6.4 6.5 6.6 6.7 6.76 17/64 6.8 6.9 7.0 7.1 7.14 9/32 7.2 7.3 7.4 7.5 7.54 19/64 7.55 7.6 7.7 7.8 7.9 7.94 5/16 8.0 8.1

• •

0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740 0750 0754 0755 0760 0770 0780 0790 0794 0800 0810

•

Size Ref.

• • • •

D153

• •

ISO VDI 3323

Item # D153 0420 D153 0430 D153 0437 D153 0440 D153 0450 D153 0460 D153 0465 D153 0470 D153 0476 D153 0478 D153 0480 D153 0490 D153 0500 D153 0505 D153 0510 D153 0516 D153 0520 D153 0530 D153 0540 D153 0550 D153 0555 D153 0556 D153 0560 D153 0565 D153 0570 D153 0580 D153 0590 D153 0595

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

4 Facet

Carbide Endmills

l2 22

d1 (h8)

• • • • •

0420 0430 0437 0440 0450 0460 0465 0470 0476 0478 0480 0490 0500 0505 0510 0516 0520 0530 0540 0550 0555 0556 0560 0565 0570 0580 0590 0595

VA R40

HSS Endmills

l1 55

Size Ref.

Point Angle

TiAlN

Reamers

4.2 4.3 4.37 11/64 4.4 4.5 4.6 4.65 4.7 4.76 3/16 4.78 4.8 4.9 5.0 5.05 5.1 5.16 13/64 5.2 5.3 5.4 5.5 5.55 5.56 7/32 5.6 5.65 5.7 5.8 5.9 5.95 15/64

Point Angle

HSS Co

Tech Info

Vc Page #: 478 

D153 A1502

Tool Holding

119

Back to index Contents

Drills Stub, R40 VA Black Magic

Carbide Drills

Brocas Stub, R40 UNI, VA, Black Magic

watch the video

Forets queue cylindrique haute performance court, Hélice 40° VA, Black Magic

HSS Drills

Punte Stub, R40 VA Black Magic

ISO Taps

h7 Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 478  8.2 8.3 8.33 21/64 8.4 8.5 8.6 8.7 8.73 11/32 8.8 8.9 9.0 9.1 9.13 23/64 9.2 9.3 9.4 9.5 9.53 3/8 9.55 9.6 9.7 9.8 9.9 9.92 25/64 10.0 10.1 10.2 10.3

Point Angle

120°

M 8

120°

Form

HSS Co TiAlN

VA R40 4 Facet h7

Item # D153 1032 D153 1040 D153 1050 D153 1060 D153 1070 D153 1072 D153 1080 D153 1090 D153 1100 D153 1110 D153 1111 D153 1120 D153 1125 D153 1130 D153 1140 D153 1150 D153 1151 D153 1160 D153 1170 D153 1180 D153 1190 D153 1191 D153 1200 D153 1210 D153 1220 D153 1230 D153 1231 D153 1240

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

Available in 0.01mm sizes up to 6.0mm on request

•

d1 (h8)

1032 10.32 13/32 89 89 1040 10.4 89 1050 10.5 89 1060 10.6 95 1070 10.7 1072 10.72 27/64 95 95 1080 10.8 95 1090 10.9 95 1100 11.0 95 1110 11.1 1111 11.11 7/16 95 95 1120 11.2 95 1125 11.25 95 1130 11.3 95 1140 11.4 95 1150 11.5 1151 11.51 29/64 95 95 1160 11.6 95 1170 11.7 95 1180 11.8 102 1190 11.9 1191 11.91 15/32 102 102 1200 12.0 102 1210 12.1 102 1220 12.2 102 1230 12.3 1231 12.3 31/64 102 102 1240 12.4

• •

Tech Info

Size Ref.

• •

Reamers

Item # D153 0820 D153 0830 D153 0833 D153 0840 D153 0850 D153 0860 D153 0870 D153 0873 D153 0880 D153 0890 D153 0900 D153 0910 D153 0913 D153 0920 D153 0930 D153 0940 D153 0950 D153 0953 D153 0955 D153 0960 D153 0970 D153 0980 D153 0990 D153 0992 D153 1000 D153 1010 D153 1020 D153 1030

•

HSS Endmills

D153

• •

Carbide Endmills

ISO VDI 3323

Form

• • • •

d1 (h8)

• • • •

DIN Taps

120

0820 0830 0833 0840 0850 0860 0870 0873 0880 0890 0900 0910 0913 0920 0930 0940 0950 0953 0955 0960 0970 0980 0990 0992 1000 1010 1020 1030

• • • • •

Size Ref.

Point Angle

D153 A1502

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Stub, R40 VA Black Magic

Carbide Drills

Brocas Stub, R40 UNI, VA, Black Magic

watch the video

Forets queue cylindrique haute performance court, Hélice 40° VA, Black Magic

HSS Drills

Punte Stub, R40 VA Black Magic

ISO Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance l1

102

120°

102

120°

102

120°

102

120°

102

120°

102

120°

102

120°

107

120°

107

120°

111

120°

111

120°

115

120°

115

120°

119

120°

119

120°

123

120°

123

120°

127

120°

127

120°

131

120°

131

120°

Form

Item #

Size Ref.

d1 (h8)

D153 1250 D153 1260 D153 1270 D153 1269 D153 1280 D153 1290 D153 1300 D153 1350 D153 1400 D153 1450 D153 1500 D153 1550 D153 1600 D153 1650 D153 1700 D153 1750 D153 1800 D153 1850 D153 1900 D153 1950 D153 2000

Form

4 Facet h7

Item #

Carbide Endmills

d1 (h8)

12.5 12.6 12.7 12.7 1/2 12.8 12.9 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0

VA R40

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

Available in 0.01mm sizes up to 6.0mm on request

•

• •

•

• • • •

• •

• • • •

D153

• • • • •

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

Reamers

1250 1260 1270 1269 1280 1290 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000

Point Angle

TiAlN

HSS Endmills

Size Ref.

Point Angle

HSS Co

DIN Taps

Vc Page #: 478 

D153 A1502

Tool Holding

121

Back to index Contents

Drills Long Series

Carbide Drills

• General purpose drill • Ideal for long reach type applications • For deep hole applications, pecking is recommended • Recommended for controlled machine drilling only

Forets queue cylindrique long

• Pour applications générales • Idéal pour les applications de perçages profonds • Perçage par pecking recommandé

122

HSS Drills

Punte Serie Lunga

• Punta Universale • Ideale per applicazioni di foratura lunga • In caso di foratura profonda è consigliato scaricare il truciolo durante la foratura • Raccomandata per macchine a controllo

Brocas serie larga

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 480 

1/16

5/64

7/64

Tech Info

D113

108

117

130

137

ISO VDI 3323

l2 29

HSS Blu

N R30 118° Standard 10

Item # D113 0100 D113 0110 D113 0120 D113 0130 D113 0140 D113 0150 D113 0159 D113 0160 D113 0170 D113 0180 D113 0190 D113 0198 D113 0200 D113 0210 D113 0220 D113 0230 D113 0238 D113 0240 D113 0250 D113 0260 D113 0270 D113 0278 D113 0280 D113 0290 D113 0300 D113 0310 D113 0318 D113 0320 D113 0330 D113 0340 M

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

Reamers

1/8

l1 57

•

HSS Endmills

3/32

• •

Carbide Endmills

1.00 1.10 1.20 1.30 1.40 1.50 1.59 1.60 1.70 1.80 1.90 1.98 2.00 2.10 2.20 2.30 2.38 2.40 2.50 2.60 2.70 2.78 2.80 2.90 3.00 3.10 3.18 3.20 3.30 3.40

• • • •

DIN Taps

122

d1 (h8)

0100 0110 0120 0130 0140 0150 0159 0160 0170 0180 0190 0198 0200 0210 0220 0230 0238 0240 0250 0260 0270 0278 0280 0290 0300 0310 0318 0320 0330 0340

• • • • • • • •

Size Ref.

D113 A0502

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

ISO Taps

• Broca de uso general • Ideal para aplicaciones de taladrado profundo • Para aplicaciones de agujeros profundos, se recomienda hacer picoteos • Recomendado solo para taladradoras controladas

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Long Series

Carbide Drills

• General purpose drill • Ideal for long reach type applications • For deep hole applications, pecking is recommended • Recommended for controlled machine drilling only

Forets queue cylindrique long

• Pour applications générales • Idéal pour les applications de perçages profonds • Perçage par pecking recommandé

HSS Drills

Punte Serie Lunga

• Punta Universale • Ideale per applicazioni di foratura lunga • In caso di foratura profonda è consigliato scaricare il truciolo durante la foratura • Raccomandata per macchine a controllo

Brocas serie larga

ISO Taps

• Broca de uso general • Ideal para aplicaciones de taladrado profundo • Para aplicaciones de agujeros profundos, se recomienda hacer picoteos • Recomendado solo para taladradoras controladas

Vc Page #: 480 

3/16

13/64

7/32

137

146

152

Item # D113 0350 D113 0357 D113 0360 D113 0370 D113 0380 D113 0390 D113 0397 D113 0400 D113 0410 D113 0420 D113 0430 D113 0437 D113 0440 D113 0450 D113 0460 D113 0470 D113 0476 D113 0480 D113 0490 D113 0500 D113 0510 D113 0516 D113 0520 D113 0530 D113 0540 D113 0550 D113 0556 D113 0560 D113 0570 D113 0580 M

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

*Not available once current stock is depleted

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

137

•

• •

• • • •

D113

137

ISO VDI 3323

137

118° Standard

Carbide Endmills

11/64

137

N R30

HSS Endmills

5/32

l2 76

Blu

Reamers

9/64

l1 137

HSS

•

3.50 3.57 3.60 3.70 3.80 3.90 3.97 4.00 4.10 4.20 4.30 4.37 4.40 4.50 4.60 4.70 4.76 4.80 4.90 5.00 5.10 5.16 5.20 5.30 5.40 5.50 5.56 5.60 5.70 5.80

A0502

Tech Info

d1 (h8)

0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0470 0476 0480 0490 0500 0510 0516 0520 0530 0540* 0550 0556 0560 0570 0580

• • • • • • • •

Size Ref.

D113

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

123

Back to index Contents

Drills Long Series

Carbide Drills

• General purpose drill • Ideal for long reach type applications • For deep hole applications, pecking is recommended • Recommended for controlled machine drilling only

Forets queue cylindrique long

• Pour applications générales • Idéal pour les applications de perçages profonds • Perçage par pecking recommandé

HSS Drills

Punte Serie Lunga

• Punta Universale • Ideale per applicazioni di foratura lunga • In caso di foratura profonda è consigliato scaricare il truciolo durante la foratura • Raccomandata per macchine a controllo

Brocas serie larga

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 480 

15/64

1/4

17/64

19/64

Tech Info

D113

156

159

162

102

162

102

162

102

162

102

162

102

162

102

162

102

165

105

165

105

165

105 M

HSS Blu

N R30 118° Standard 10

Item #

159

ISO VDI 3323

l2 92

D113 0590 D113 0595 D113 0600 D113 0610 D113 0620 D113 0630 D113 0635 D113 0640 D113 0650 D113 0660 D113 0670 D113 0676 D113 0680 D113 0690 D113 0700 D113 0710 D113 0714 D113 0720 D113 0730 D113 0740 D113 0750 D113 0754 D113 0760 D113 0770 D113 0780 D113 0790 D113 0794 D113 0800 D113 0810 D113 0820 K

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

Reamers

5/16

l1 152

•

HSS Endmills

9/32

• •

Carbide Endmills

5.90 5.95 6.00 6.10 6.20 6.30 6.35 6.40 6.50 6.60 6.70 6.75 6.80 6.90 7.00 7.10 7.14 7.20 7.30 7.40 7.50 7.54 7.60 7.70 7.80 7.90 7.94 8.00 8.10 8.20

• • • •

DIN Taps

124

d1 (h8)

0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0676 0680 0690 0700 0710 0714 0720 0730 0740 0750 0754 0760 0770* 0780 0790 0794 0800 0810 0820

• • • • • • • •

Size Ref.

D113 A0502

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

*Not available once current stock is depleted

•

ISO Taps

• Broca de uso general • Ideal para aplicaciones de taladrado profundo • Para aplicaciones de agujeros profundos, se recomienda hacer picoteos • Recomendado solo para taladradoras controladas

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Long Series

Carbide Drills

• General purpose drill • Ideal for long reach type applications • For deep hole applications, pecking is recommended • Recommended for controlled machine drilling only

Forets queue cylindrique long

• Pour applications générales • Idéal pour les applications de perçages profonds • Perçage par pecking recommandé

HSS Drills

Punte Serie Lunga

• Punta Universale • Ideale per applicazioni di foratura lunga • In caso di foratura profonda è consigliato scaricare il truciolo durante la foratura • Raccomandata per macchine a controllo

Brocas serie larga

ISO Taps

• Broca de uso general • Ideal para aplicaciones de taladrado profundo • Para aplicaciones de agujeros profundos, se recomienda hacer picoteos • Recomendado solo para taladradoras controladas

Vc Page #: 480 

3/8

25/64

13/32

105

165

105

165

105

171

108

171

108

171

108

171

108

171

108

171

108

171

108

171

108

171

108

171

108

171

108

171

108

171

108

171

108

178

111

178

111

178

111

178

111

178

111

178

111

178

111

184

117

184

117

Item #

M 8

D113 0830 D113 0833 D113 0840 D113 0850 D113 0860 D113 0870 D113 0873 D113 0880 D113 0890 D113 0900 D113 0910 D113 0913 D113 0920 D113 0930 D113 0940 D113 0950 D113 0953 D113 0960 D113 0970 D113 0980 D113 0990 D113 0992 D113 1000 D113 1010 D113 1020 D113 1030 D113 1032 D113 1040 D113 1050 D113 1060 K

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

*Not available once current stock is depleted

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

105

165

•

• •

• • • •

D113

105

165

ISO VDI 3323

105

165

118° Standard

Carbide Endmills

23/64

165

N R30

HSS Endmills

11/32

l2 105

Blu

Reamers

21/64

l1 165

HSS

•

8.30 8.33 8.40 8.50 8.60 8.70 8.73 8.80 8.90 9.00 9.10 9.13 9.20 9.30 9.40 9.50 9.52 9.60 9.70 9.80 9.90 9.92 10.00 10.10 10.20 10.30 10.32 10.40 10.50 10.60

A0502

Tech Info

d1 (h8)

0830 0833 0840 0850 0860 0870 0873 0880* 0890 0900 0910 0913 0920 0930* 0940 0950 0953 0960 0970 0980 0990 0992 1000 1010 1020 1030 1032 1040 1050 1060

• • • • • • • •

Size Ref.

D113

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

125

Back to index Contents

Drills Long Series

Carbide Drills

• General purpose drill • Ideal for long reach type applications • For deep hole applications, pecking is recommended • Recommended for controlled machine drilling only

Forets queue cylindrique long

• Pour applications générales • Idéal pour les applications de perçages profonds • Perçage par pecking recommandé

HSS Drills

Punte Serie Lunga

• Punta Universale • Ideale per applicazioni di foratura lunga • In caso di foratura profonda è consigliato scaricare il truciolo durante la foratura • Raccomandata per macchine a controllo

Brocas serie larga

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Order Quantity

Vc Page #: 480 

27/64

7/16

29/64

31/64

Tech Info

D113

184

117

184

117

184

117

184

117

184

117

184

117

184

117

184

117

184

117

184

117

191

121

184

117

184

117

184

117

184

117

191

121

197

121

197

121

197

121

197

121

197

121

197

121

197

121

197

121

197

121

197

121

203

121

203

121

203

121

ISO VDI 3323

l2 117

HSS Blu

N R30 118° Standard 10

Item #

M 8

D113 1070 D113 1072 D113 1080 D113 1090 D113 1100 D113 1110 D113 1111 D113 1120 D113 1130 D113 1140 D113 1150 D113 1151 D113 1160 D113 1170 D113 1180 D113 1190 D113 1191 D113 1200 D113 1210 D113 1220 D113 1230 D113 1231 D113 1240 D113 1250 D113 1260 D113 1269 D113 1270 D113 1280 D113 1290 D113 1300 K

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

Reamers

1/2

l1 184

•

HSS Endmills

15/32

• •

Carbide Endmills

10.70 10.72 10.80 10.90 11.00 11.10 11.11 11.20 11.30 11.40 11.50 11.51 11.60 11.70 11.80 11.90 11.91 12.00 12.10 12.20 12.30 12.30 12.40 12.50 12.60 12.70 12.70 12.80 12.90 13.00

• • • •

DIN Taps

126

d1 (h8)

1070 1072 1080 1090 1100 1110 1111 1120 1130 1140 1150 1151 1160 1170 1180 1190 1191 1200 1210 1220 1230 1231 1240 1250 1260 1269 1270 1280 1290 1300

• • • • • • • •

Size Ref.

D113 A0502

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

ISO Taps

• Broca de uso general • Ideal para aplicaciones de taladrado profundo • Para aplicaciones de agujeros profundos, se recomienda hacer picoteos • Recomendado solo para taladradoras controladas

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

127

Drills Long Series, DHL

Carbide Drills

Brocas serie larga, DHL

• High performance drill • Suitable for materials up to 1200N/mm² • Point geometry ensures high strength • Parabolic flute design for optimal chip transportation • Less pecking required over standard drills • TiAlN for longer tool life

Contents

Back to index

Forets queue cylindrique long, DHL

HSS Drills

• Forets Haute performance pour perçage profond • Adaptés au matériaux jusqu’à 1200N/mm² • Affûtage 130° et géométrie de pointe pour un meilleur centrage • Taillage parabolique pour une meilleure évacuation copeaux • Perçage par pecking recommandé • Revêtement TiAlN pour une meilleure durée de vie

Punte Serie Lunga, DHL

100

106

112

P 2

M 8

0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640 0650

3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

† Sizes <3.0 point type: 130o 4 Facet

d1 (h8)

Item #

119

126

132

139

148

D171 0380 D171 0390 D171 0400 D171 0410 D171 0420 D171 0430 D171 0440 D171 0450 D171 0460 D171 0470 D171 0480 D171 0490 D171 0500 D171 0510 D171 0520 D171 0530 D171 0540 D171 0550 D171 0560 D171 0570 D171 0580 D171 0590 D171 0600 D171 0610 D171 0620 D171 0630 D171 0640 D171 0650 S

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • •

D171

Size Ref.

130° Form B

•

ISO VDI 3323

Item # D171 0100 D171 0110 D171 0120 D171 0130 D171 0140 D171 0150 D171 0160 D171 0170 D171 0180 D171 0190 D171 0200 D171 0210 D171 0220 D171 0230 D171 0240 D171 0250 D171 0260 D171 0270 D171 0280 D171 0290 D171 0300 D171 0310 D171 0320 D171 0330 D171 0340 D171 0350 D171 0360 D171 0370

NH R40

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

l2 33

TiAlN

Carbide Endmills

l1 56

•

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7

• • • • •

d1 (h8)

0100† 0110† 0120† 0130† 0140† 0150† 0160† 0170† 0180† 0190† 0200† 0210† 0220† 0230† 0240† 0250† 0260† 0270† 0280† 0290† 0300 0310 0320 0330 0340 0350 0360 0370

• • • • • • •

Size Ref.

Point Form

HSS Co

HSS Endmills

Vc Page #: 480 

D171 A0508

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Tool Holding

Tech Info

ISO Taps

127

Back to index Contents

Drills Long Series, DHL

Carbide Drills

Brocas serie larga, DHL

Forets queue cylindrique long, DHL

HSS Drills

Punte Serie Lunga, DHL

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 480  Item #

Size Ref.

D171 0660 D171 0670 D171 0680 D171 0690 D171 0700 D171 0710 D171 0720 D171 0730 D171 0740 D171 0750 D171 0760 D171 0770 D171 0780 D171 0790 D171 0800 D171 0810 D171 0820 D171 0830 D171 0840 D171 0850 D171 0860 D171 0870 D171 0880 D171 0890 D171 0900 D171 0910 D171 0920 D171 0930

0940 0950 0980 1000 1020 1050 1100 1150 1200 1250 1300

148

156

102

156

102

156

102

156

102

156

102

156

102

156

102

156

102

165

109

165

109

165

109

165

109

165

109

165

109

165

109

165

109

165

109

165

109

175

115

175

115

175

115

175

115

175

115

175

115

175

115

175

115

Tech Info

ISO VDI 3323

D171

M 8

d1 (h8) 9.4 9.5 9.8 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

HSS Co TiAlN

NH R40 130° Form B -

Item #

175

115

175

115

184

121

184

121

184

121

184

121

195

128

195

128

205

134

205

134

205

134

D171 0940 D171 0950 D171 0980 D171 1000 D171 1020 D171 1050 D171 1100 D171 1150 D171 1200 D171 1250 D171 1300

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

Reamers

l2 97

•

HSS Endmills

l1 148

• • • • •

Carbide Endmills

6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3

• • • • • • • • • • • • • •

DIN Taps

128

d1 (h8)

0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930

• • • • • • •

Size Ref.

D171 A0508

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Extra Long, DHXL-1

Carbide Drills

Brocas Extra Largas, D, DHXL-1

Forets queue cylindrique long, DHXL-1

HSS Drills

129

Punte Extra Lunghe, DHXL-1

ISO Taps

Vc Page #: 480  l2 85

NH R40 130° Form B -

Item #

135

155

105

165

115

175

120

185

125

195

135

205

140

205

140

215

150

225

155

225

155

240

165

240

165

250

175

250

175

265

185

D194 0200 D194 0250 D194 0300 D194 0350 D194 0400 D194 0450 D194 0500 D194 0550 D194 0600 D194 0650 D194 0700 D194 0750 D194 0800 D194 0850 D194 0900 D194 0950 D194 1000

DIN Taps

l1 125

TiAlN

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

• • • • •

• • • • • • • • • • • • • •

D194

• • • • • • •

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

Reamers

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0

HSS Co

Carbide Endmills

d1 (h8)

0200 0250 0300 0350 0400 0450 0500 0550 0600 0650 0700 0750 0800 0850 0900 0950 1000

A0508

HSS Endmills

Size Ref.

D194

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

129

Back to index Contents

Drills Extra Long, DHXL-2

Carbide Drills

Brocas Extra Largas, D, DHXL-2

Forets queue cylindrique long, DHXL-2

HSS Drills

130

Punte Extra Lunghe, DHXL-2

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 480  Size Ref.

DIN Taps

d1 (h8)

Carbide Endmills

0300 0350 0400 0450 0500 0550 0600 0650 0700 0750 0800 0850 0900 0950 1000

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0

200

135

210

145

220

150

235

160

245

170

260

180

260

180

275

190

290

200

290

200

305

210

305

210

320

220

320

220

340

235

D195 A0508 HSS Co TiAlN

NH R40 130° Form B -

Item # D195 0300 D195 0350 D195 0400 D195 0450 D195 0500 D195 0550 D195 0600 D195 0650 D195 0700 D195 0750 D195 0800 D195 0850 D195 0900 D195 0950 D195 1000

HSS Endmills Reamers 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

• • • • •

• • • • • • •

D195

• • • • • • • • • • • • • •

Tech Info

130

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Extra Long, DHXL-3

Carbide Drills

Brocas Extra Largas, D, DHXL-3

Forets queue cylindrique long, DHXL-3

HSS Drills

131

Punte Extra Lunghe, DHXL-3

ISO Taps

Vc Page #: 480  l1

265

180

280

190

295

200

315

210

330

225

330

225

350

235

370

250

370

250

390

265

390

265

410

280

410

280

430

295

TiAlN

NH R40 130° Form B -

Item # D196 0350 D196 0400 D196 0450 D196 0500 D196 0550 D196 0600 D196 0650 D196 0700 D196 0750 D196 0800 D196 0850 D196 0900 D196 0950 D196 1000

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

• • • • •

• • • • • • • • • • • • • •

D196

• • • • • • •

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

Reamers

HSS Endmills

3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0

HSS Co

DIN Taps

d1 (h8)

0350 0400 0450 0500 0550 0600 0650 0700 0750 0800 0850 0900 0950 1000

A0508

Carbide Endmills

Size Ref.

D196

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

131

Back to index Contents

Drills Morse Taper Shank

Carbide Drills

• General purpose drill • Suitable for materials up to 900N/mm²

Forets queue cone morse

• Pour applications générales • Adaptés au matériaux jusqu’à 900N/mm²

Punte Cono Morse

• Punta Universale • Ideale per materiali fino a 900N/mm²

132

HSS Drills

Brocas Mango Cono Morse

• Broca de uso general • Adecuado para materiales de hasta 900N/mm²

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 480 

Reamers

D115 0318 D115 0357 D115 0397 D115 0437 D115 0476 D115 0516 D115 0550 D115 0556 D115 0595 D115 0600 D115 0635 D115 0650 D115 0676 D115 0700 D115 0714 D115 0750 D115 0754 D115 0794 D115 0800 D115 0833 D115 0850 D115 0873 D115 0900 D115 0913 D115 0950 D115 0953 D115 0992 D115 1000

Tech Info

M 8

Size Ref.

d1 (h8)

1032 10.32 13/32 168 168 1050 10.50 1072 10.72 27/64 175 175 1100 11.00 1111 11.11 7/16 175 175 1150 11.50 1151 11.51 29/64 175 1191 11.91 15/32 182 182 1200 12.00 1231 12.30 31/64 182 182 1250 12.50 1269 12.70 1/2 182 182 1300 13.00 1310 13.10 33/64 182 1349 13.49 17/32 189 189 1350 13.50 1389 13.89 35/64 189 189 1400 14.00 1429 14.29 9/16 212 212 1450 14.50 1468 14.68 37/64 212 212 1500 15.00 1508 15.08 19/32 218 1548 15.48 39/64 218 218 1550 15.50 1588 15.87 5/8 218 218 1600 16.00 1627 16.27 41/64 223

Blu

N R30 118° Form A -

MT #

Item #

101

108

114

120

125

D115 1032 D115 1050 D115 1072 D115 1100 D115 1111 D115 1150 D115 1151 D115 1191 D115 1200 D115 1231 D115 1250 D115 1269 D115 1300 D115 1310 D115 1349 D115 1350 D115 1389 D115 1400 D115 1429 D115 1450 D115 1468 D115 1500 D115 1508 D115 1548 D115 1550 D115 1588 D115 1600 D115 1627

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

HSS Endmills

Item #

•

Carbide Endmills

D115

MT #

ISO VDI 3323

l2 37

HSS

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

• • • • • • • •

DIN Taps

132

d1 (h8)

0318 3.18 1/8 117 0357 3.57 9/64 121 0397 3.97 5/32 123 0437 4.37 11/64 128 0476 4.76 3/16 133 0516 5.16 13/64 133 138 0550 5.50 0556 5.56 7/32 138 0595 5.95 15/64 138 138 0600 6.00 0635 6.35 1/4 144 144 0650 6.50 0676 6.75 17/64 144 150 0700 7.00 0714 7.14 9/32 150 150 0750 7.50 0754 7.54 19/64 156 0794 7.94 5/16 156 156 0800 8.00 0833 8.33 21/64 156 156 0850 8.50 0873 8.73 11/32 162 162 0900 9.00 0913 9.13 23/64 162 162 0950 9.50 0953 9.52 3/8 168 0992 9.92 25/64 168 168 1000 10.00

• • • • • •

Size Ref.

D115 A0702

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Morse Taper Shank

Carbide Drills

• General purpose drill • Suitable for materials up to 900N/mm²

Forets queue cone morse

• Pour applications générales • Adaptés au matériaux jusqu’à 900N/mm²

Punte Cono Morse

HSS Drills

• Punta Universale • Ideale per materiali fino a 900N/mm²

Brocas Mango Cono Morse

Size Ref.

223

125

223

125

228

130

228

130

228

130

228

130

228

130

233

135

233

135

233

135

233

135

238

140

238

140

238

140

238

140

238

140

243

145

243

145

243

145

243

145

243

145

248

150

248

150

248

150

248

150

248

150

253

155

D115 1650 D115 1667 D115 1700 D115 1707 D115 1746 D115 1750 D115 1786 D115 1800 D115 1826 D115 1850 D115 1865 D115 1900 D115 1905 D115 1945 D115 1950 D115 1984 D115 2000 D115 2024 D115 2050 D115 2064 D115 2100 D115 2103 D115 2143 D115 2150 D115 2183 D115 2200 D115 2223 D115 2250

2262 2300 2302 2342 2350 2381 2400 2421 2450 2461 2500 2501 2540 2550 2580 2600 2619 2650 2659 2699 2700 2738 2750 2778 2800 2818 2850 2858

P 3

M 8

• • • • • • • •

D115

MT #

Item #

253

155

253

155

253

155

276

155

276

155

281

160

281

160

281

160

281

160

281

160

281

160

286

165

286

165

286

165

286

165

286

165

286

165

286

165

291

170

291

170

291

170

291

170

291

170

291

170

291

170

296

175

296

175

296

175

D115 2262 D115 2300 D115 2302 D115 2342 D115 2350 D115 2381 D115 2400 D115 2421 D115 2450 D115 2461 D115 2500 D115 2501 D115 2540 D115 2550 D115 2580 D115 2600 D115 2619 D115 2650 D115 2659 D115 2699 D115 2700 D115 2738 D115 2750 D115 2778 D115 2800 D115 2818 D115 2850 D115 2858

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

ISO VDI 3323

d1 (h8)

22.62 57/64 23.00 23.02 29/32 23.41 59/64 23.50 23.81 15/16 24.00 24.21 61/64 24.50 24.61 31/32 25.00 25.00 63/64 25.40 1 25.50 25.80 1-1/64 26.00 26.19 1-1/32 26.50 26.59 1-3/64 26.99 1-1/16 27.00 27.38 1-5/64 27.50 27.78 1-3/32 28.00 28.18 1-7/64 28.50 28.57 1-1/8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

DIN Taps

Item #

125

118° Form A

Carbide Endmills

223

N R30

•

d1 (h8)

Blu

HSS Endmills

MT #

16.50 16.67 21/32 17.00 17.06 43/64 17.46 11/16 17.50 17.86 45/64 18.00 18.26 23/32 18.50 18.65 47/64 19.00 19.05 3/4 19.45 49/64 19.50 19.84 25/32 20.00 20.24 51/64 20.50 20.64 13/16 21.00 21.03 53/64 21.43 27/32 21.50 21.83 55/64 22.00 22.22 7/8 22.50

•

1650 1667 1700 1707 1746 1750 1786 1800 1826 1850 1865 1900 1905 1945 1950 1984 2000 2024 2050 2064 2100 2103 2143 2150 2183 2200 2223 2250

• • • • • •

Size Ref.

HSS

Reamers

Vc Page #: 480 

D115 A0702

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Tool Holding

ISO Taps

• Broca de uso general • Adecuado para materiales de hasta 900N/mm²

133

Back to index Contents

Drills Morse Taper Shank

Carbide Drills

• General purpose drill • Suitable for materials up to 900N/mm²

Forets queue cone morse

• Pour applications générales • Adaptés au matériaux jusqu’à 900N/mm²

Punte Cono Morse

• Punta Universale • Ideale per materiali fino a 900N/mm²

HSS Drills

Brocas Mango Cono Morse

• Broca de uso general • Adecuado para materiales de hasta 900N/mm²

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 480  Item #

Size Ref.

296

175

296

175

296

175

296

175

296

175

301

180

301

180

301

180

301

180

301

180

301

180

301

180

306

185

334

185

334

185

334

185

334

185

334

185

334

185

339

190

339

190

339

190

339

190

339

190

344

195

344

195

344

195

D115 2897 D115 2900 D115 2937 D115 2950 D115 2977 D115 3000 D115 3016 D115 3050 D115 3056 D115 3096 D115 3100 D115 3135 D115 3150 D115 3175 D115 3200 D115 3215 D115 3250 D115 3300 D115 3334 D115 3350 D115 3400 D115 3450 D115 3493 D115 3500 D115 3550 D115 3600 D115 3650 D115 3700

3750 3800 3810 3850 3900 3950 4000 4050 4100 4128 4150 4200 4250 4300 4350 4400 4405 4445 4450 4485 4500 4550 4564 4600 4643 4650 4700 4723

Tech Info

ISO VDI 3323

D115

M 8

d1 (h8)

37.50 38.00 38.10 1-1/2 38.50 39.00 39.50 40.00 40.50 41.00 41.27 1-5/8 41.50 42.00 42.50 43.00 43.50 44.00 44.05 1-47/64 44.45 1-3/4 44.50 44.85 1-49/64 45.00 45.50 45.64 1-51/64 46.00 46.43 1-53/64 46.50 47.00 47.23 1-55/64 N

HSS Blu

N R30 118° Form A -

MT #

Item #

344

195

349

200

349

200

349

200

349

200

349

200

349

200

354

205

354

205

354

205

354

205

354

205

354

205

359

210

359

210

359

210

359

210

359

210

359

210

359

210

359

210

364

215

359

210

364

215

359

210

364

215

364

215

359

210

D115 3750 D115 3800 D115 3810 D115 3850 D115 3900 D115 3950 D115 4000 D115 4050 D115 4100 D115 4128 D115 4150 D115 4200 D115 4250 D115 4300 D115 4350 D115 4400 • D115 4445 D115 4450 • D115 4500 D115 4550 • D115 4600 • D115 4650 D115 4700 •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

*Not available once current stock is depleted

•

Reamers

MT #

•

HSS Endmills

l2 175

•

Carbide Endmills

l1 296

• • • • • • • •

DIN Taps

134

d1 (h8)

2897 28.97 1-9/64 2900 29.00 2937 29.36 1-5/32 2950 29.50 2977 29.77 1-11/64 3000 30.00 3016 30.16 1-3/16 3050 30.50 3056 30.56 1-13/64 3096 30.96 1-7/32 3100 31.00 3135 31.35 1-15/64 3150 31.50 3175 31.75 1-1/4 3200 32.00 3215* 32.15 1-17/64 3250 32.50 3300 33.00 3334 33.40 1-5/16 3350 33.50 3400 34.00 3450 34.50 3493 34.92 1-3/8 3500 35.00 3550 35.50 3600 36.00 3650 36.50 3700 37.00

• • • • • •

Size Ref.

D115 A0702

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Morse Taper Shank

Carbide Drills

• General purpose drill • Suitable for materials up to 900N/mm²

Forets queue cone morse

• Pour applications générales • Adaptés au matériaux jusqu’à 900N/mm²

Punte Cono Morse

HSS Drills

• Punta Universale • Ideale per materiali fino a 900N/mm²

Brocas Mango Cono Morse

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

369

220

369

220

359

210

369

220

359

210

369

220

369

220

359

210

369

220

359

210

374

225

374

225

413

225

413

225

413

225

413

225

413

225

413

225

413

225

429

241

429

241

432

244

432

244

432

244

432

244

432

244

D115 4750 D115 4763 D115 4800 • D115 4850 • D115 4900 D115 4950 • D115 5000 • D115 5050 D115 5080 • D115 5159 D115 5239 D115 5398 D115 5556 D115 5715 D115 5874 D115 6033 D115 6191 D115 6350 D115 6509 D115 6668 D115 6985 D115 7620

P 3

M 8

• • • • • • • •

D115

d1 (h8)

MT #

Item #

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

ISO VDI 3323

Size Ref.

Carbide Endmills

HSS Endmills

Item #

215

118° Form A

Reamers

364

N R30

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

d1 (h8)

Blu

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

MT #

47.50 47.63 1-7/8 48.00 48.02 1-57/64 48.50 48.82 1-59/64 49.00 49.50 49.61 1-61/64 50.00 50.04 1-63/64 50.50 50.80 2 51.00 51.59 2-1/32 52.39 2-1/16 53.98 2-1/8 55.56 2-3/16 57.15 2-1/4 58.74 2-5/16 60.32 2-3/8 61.91 2-7/16 63.50 2-1/2 65.09 2-9/16 66.67 2-5/8 69.85 2-3/4 76.20 3

•

4750 4763 4800 4802 4850 4882 4900 4950 4961 5000 5004 5050 5080 5100 5159 5239 5398 5556 5715 5874 6033 6191 6350 6509 6668 6985 7620

• • • • • •

Size Ref.

HSS

DIN Taps

Vc Page #: 480 

D115 A0702

Tool Holding

ISO Taps

• Broca de uso general • Adecuado para materiales de hasta 900N/mm²

135

Back to index Contents

Drills Morse Taper Shank, Heavy Duty

Carbide Drills

• General purpose cobalt drill • Suitable for materials up to 1400N/mm² • Cobalt content, ensures high abrasion resistance

Forets queue cone morse haute résistance • Forets cobalt pour applications générales • Adaptés au matériaux jusqu’à 1400N/mm² • Haute résistance à l'abrasion

136

HSS Drills

Punte Cono Morse, Heavy Duty

• Punta universale al cobalto • Ideale per materiali duri fino a 850N/mm² • Contiene Cobalto per assicurare alta resistenza all'abrasione

Brocas Mango Cono Morse, Diseño Robusto

• Broca con cobalto de uso general • Adecuado para materiales de hasta 1400N/mm² • Contenido de cobalto, garantiza una alta resistencia a la abrasión

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 480  MT #

Item #

168

175

182

101

182

101

182

101

189

108

189

108

212

114

212

114

218

120

218

120

223

125

223

125

228

130

228

130

233

135

233

135

238

140

238

140

243

145

243

145

248

150

248

150

253

155

253

155

276

155

281

160

281

160

D141 1000 D141 1050 D141 1100 D141 1150 D141 1200 D141 1250 D141 1300 D141 1350 D141 1400 D141 1450 D141 1500 D141 1550 D141 1600 D141 1650 D141 1700 D141 1750 D141 1800 D141 1850 D141 1900 D141 1950 D141 2000 D141 2050 D141 2100 D141 2150 D141 2200 D141 2250 D141 2300 D141 2350 D141 2400 D141 2450

M 8

P Steel M Stainless Steel

Cast Iron

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

Tech Info

• • •

Reamers

R30 118° Form A

•

HSS Endmills

D141

Tough Materials

ISO VDI 3323

HSS Co Colour Temp

168

•

Carbide Endmills

10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.50 20.00 20.50 21.00 21.50 22.00 22.50 23.00 23.50 24.00 24.50

• • • • • • • •

DIN Taps

136

d1 (h8)

1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 2400 2450

• • • • • • • • • • • • •

Size Ref.

D141 A0702

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Morse Taper Shank, Heavy Duty

Carbide Drills

• General purpose cobalt drill • Suitable for materials up to 1400N/mm² • Cobalt content, ensures high abrasion resistance

Forets queue cone morse haute résistance • Forets cobalt pour applications générales • Adaptés au matériaux jusqu’à 1400N/mm² • Haute résistance à l'abrasion

Punte Cono Morse, Heavy Duty

HSS Drills

• Punta universale al cobalto • Ideale per materiali duri fino a 850N/mm² • Contiene Cobalto per assicurare alta resistenza all'abrasione

Brocas Mango Cono Morse, Diseño Robusto

Size Ref.

d1 (h8)

2500 2550 2600 2650 2700 2750 2800 2850 2900 2950 3000 3050 3100 3150 3200

Tough Materials R30 118° Form A -

MT #

Item #

281

160

286

165

286

165

286

165

291

170

291

170

291

170

296

175

296

175

296

175

296

175

301

180

301

180

301

180

334

185

D141 2500 D141 2550 D141 2600 D141 2650 D141 2700 D141 2750 D141 2800 D141 2850 D141 2900 D141 2950 D141 3000 D141 3050 D141 3100 D141 3150 D141 3200

P 6

M 8

P Steel M Stainless Steel

Cast Iron

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

• • •

• • • • • • • • • • • • •

•

• • • • • • • •

D141

•

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

Reamers

HSS Endmills

25.00 25.50 26.00 26.50 27.00 27.50 28.00 28.50 29.00 29.50 30.00 30.50 31.00 31.50 32.00

HSS Co Colour Temp

DIN Taps

Vc Page #: 480 

D141 A0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Tool Holding

ISO Taps

• Broca con cobalto de uso general • Adecuado para materiales de hasta 1400N/mm² • Contenido de cobalto, garantiza una alta resistencia a la abrasión

137

Back to index Contents

Drills Morse Taper Shank, Long Series

Carbide Drills

• General purpose drill • For long reach applications • Suitable for materials up to 900N/mm²

Forets queue cone morse, série longue

• Pour applications générales • Pour perçages profonds • Adaptés au matériaux jusqu’à 900N/mm²

138

HSS Drills

Punte Cono Morse, Long Series

• Punta Universale • Ideale per applicazioni di foratura lunga • Ideale per materiali duri fino a 900N/mm²

Brocas Mango Cono Morse, Serie Larga

• Broca de uso general • Para aplicaciones de taladrado profundo • Adecuado para materiales de hasta 900N/mm²

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 480 

Tech Info

MT #

Item #

1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 4

D140 1000 D140 1050 D140 1100 D140 1150 D140 1200 D140 1250 D140 1300 D140 1350 D140 1400 D140 1450 D140 1500 D140 1550 D140 1600 D140 1650 D140 1700 D140 1750 D140 1800 D140 1850 D140 1900 D140 1950 D140 2000 D140 2050 D140 2100 D140 2200 D140 2300 D140 2400 D140 2500 D140 2600 D140 2800 D140 3000 D140 3200

M 8

118° Standard

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

•

Reamers

N R30

116 116 125 125 134 134 134 142 142 147 147 153 153 159 159 165 165 171 171 177 177 184 184 191 198 206 206 214 222 230 248

• • • • • •

HSS Endmills

D140

Blu

ISO VDI 3323

HSS

197 197 206 206 215 215 215 223 223 245 245 251 251 257 257 263 263 269 269 275 275 282 282 289 296 327 327 335 343 351 397

•

Carbide Endmills

10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.50 20.00 20.50 21.00 22.00 23.00 24.00 25.00 26.00 28.00 30.00 32.00

• • • • • • • •

DIN Taps

138

d1 (h8)

1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2200 2300 2400 2500 2600 2800 3000 3200

• •

Size Ref.

D140 A0704

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Morse Taper Accessories

Carbide Drills

• Morse Taper Sleeve • Hardened alloy steel • Precision ground internally and externally • Drill Drift key - to eject Morse Taper drills from sleeves, sockets and machine spindles

Accessoires pour Forets cône morse • Adapteurs cône morse • Acier trempés • Ejecteur de forets cône morse

139

139 HSS Drills

Punte Cono Morse Accessori

• Bussole riduzione • Acciaio temprato • Rettificato esternamente e internamente • Chiave per estrazione punta dal mandrino e dalla riduzione

Accesorios Brocas Mango Cono Morse

0013 0023 0014 0024 0034 0015 0025 0035 0045 0036 0046 0056

(external)

23.825

12.065

23.825

112

17.78

(1)*

31.267

124

6.5

12.065

31.267

124

6.5

17.78

31.267

140

22.5

23.825

(1)*

44.399

156

6.5

12.065

(2)*

44.399

156

6.5

17.78

44.399

156

6.5

23.825

44.399

171

21.5

31.267

63.348

218

23.825

63.348

218

31.267

63.348

218

44.399

MT #1 & #2 MT #3 MT #4 MT #5 & #6

Brt

Drift

Sleeve

Item #

Tool Holding

Alloyed Steel

Item # D118 0013 D118 0023 D118 0014 D118 0024 D118 0034 D118 0015 D118 0025 D118 0035 D118 0045 D118 0036 D118 0046 D118 0056

D142 MT1 D142 MT3 D142 MT4 D142 MT5

Tech Info

Reamers

MT1 MT3 MT4 MT5

(internal)

Brt

DIN Taps

Size Ref.

MT #

D118 A0702

Carbide Endmills

D142 A0702

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Inside Morse Taper

Outside Morse Taper

ISO Taps

• Mango Cono Morse • Aleación de acero endurecido • Rectificado de precisión interno y externo • Llave Drift Key: para extraer el cono morse del mango y husillo de la máquina

*The use of sizes where inside taper is shown in brackets should be avoided wherever possible

NOTE: HB & HE shanks available, subject to lead time.

139

Back to index Contents

Drills Reduced Shank

Carbide Drills

• General purpose drill with reduced shank • Standard point geometry • Designed for machine and hand held drilling • Overall and flute lengths do not include drill point

Forets queue réduite

• Pour applications générales • Affutâge standard • Adapté aux machines conventionnelles et à main • Longueur utile totale I2 quotée sans la pointe

140

HSS Drills

Punte Gambo Ridotto

• Punta universale con il gambo di presa ridotto • Geometria di punta standard • Progettata per lavorazione a macchina o manuale • La lunghezza totale e la lunghezza tagliente non includono la geometria di punta

Brocas de Mango Reducido

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank

Vc Page #: 481  Size Ref.

Blu

R30

118° Standard

10mm

12.5mm

Item #

Size Ref.

D188 1310

1826

18.26

23/32

152

D188 1826

1349

13.49

17/32

152

D188 1349

1865

18.65

47/64

152

D188 1865

1350

13.5

152

D188 1350

1800

18.0

152

D188 1800

1389

13.89

152

D188 1389

1850

18.5

152

D188 1850

1400

14.0

152

D188 1400

1900

19.0

152

D188 1900

1429

14.29

152

D188 1429

1905

19.05

3/4

152

1450

14.5

152

D188 1450

1945

19.45

49/64

152

D188 1945

1468

14.68

152

D188 1468

1950

19.5

152

D188 1950

152

D188 1984

152

D188 2000

152

D188 2024

152

D188 2050

152

D188 2064

152

D188 2100

37/64

D120 1429

Item #

D120 1905

Item #

D188 1905

15.0

152

D188 1500

1984

19.84

1508

15.08

19/32

152

D188 1508

2000

20.0

1548

15.48

39/64

152

D188 1548

2024

20.24

1550

15.5

152

D188 1550

2050

20.5

1588

15.87

152

D188 1588

2064

20.64

1600

16.0

152

D188 1600

2100

21.0

1627

16.27

152

D188 1627

2143

21.43

152

D188 2143

1650

16.5

152

D188 1650

2150

21.5

152

D188 2150

1667

16.67

152

D188 1667

2200

22.0

152

D188 2200

1700

17.0

152

D188 1700

2223

22.22

152

D188 2223

1707

17.06

43/64

152

D188 1707

2250

22.5

152

D188 2250

1746

17.46

11/16

152

D188 1746

2300

23.0

152

D188 2300

1786

17.86

45/64

152

D188 1786

2302

23.02

152

D188 2302

1750

17.5

152

D188 1750

2350

23.5

152

D188 2350

D120 D188

M 8

25/32 51/64 13/16 27/32

7/8

29/32

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • •

Tech Info

ISO VDI 3323

• • • • • • • •

21/32

• •

41/64

D120 1588

• •

5/8

• •

Reamers

1500

• • • •

HSS Endmills

l2 86

• •

Carbide Endmills

l1 152

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

140

HSS

Blu

33/64

9/16

d1 (h8)

HSS

13.10

35/64

Item #

D188 A0906

1310

• • • • • • • • • • • • • • • •

DIN Taps

d1 (h8)

D120 A0906

• •

ISO Taps

• Broca de uso general con mango reducido • Geometría de punta estándar • Diseñado para máquinas y taladrado manual • Las longitudes totales de hélice, no incluyen punta autocentrante

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Reduced Shank

Carbide Drills

• General purpose drill with reduced shank • Standard point geometry • Designed for machine and hand held drilling • Overall and flute lengths do not include drill point

Forets queue réduite

HSS Drills

• Pour applications générales • Affutâge standard • Adapté aux machines conventionnelles et à main • Longueur utile totale I2 quotée sans la pointe

Punte Gambo Ridotto

Brocas de Mango Reducido

152

D188 2381

24.0

152

D188 2400

24.5

152

D188 2450

152

2461

24.61

2500

25.0

2540

25.40

2600

26.0

2699

26.99

2800

28.0

2858

28.57

31/32 1 1-1/16 1-1/8

Item #

D188 RS4

D188 RS4M

D188 2461

S8R

9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1" Plastic

D188 S8R

D188 2500

SM8R

14, 15, 16, 16.5 , 18, 20, 22, 25mm Plastic

D188 SM8R

152

D188 2540

RS16

D188 RS16

D188 2600

17/32, 9/16,19/32, 5/8, 21/32, 11/16, Plastic 23/32, 3/4, 5/32, 13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 1"

152 152

D188 2699

152

D188 2800

152

D188 2858 D188 3000

D188 3016

3175

31.75

1-1/4

152

D188 3175

D188 RS16

• •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• •

• • • •

• •

• • • • • • • • • • • • • • • •

D120 D188

D188 SM8R

• •

D188 RS4M

Reamers

Item #

Foam

152

Item # Foam

152

12.5mm

16, 18, 22, 25mm

1-3/16

118° Standard

10mm

5/8, 3/4, 7/8, 1"

30.0

118° Standard

RS4 RS4M

30.16

ISO

R30

Case Pieces

3016

VDI 3323

d1 (h8)

R30

Sets (Discount group A1202)

3000

D188 RS4

Size Ref.

Blu

HSS Endmills

2450

Item #

HSS

Blu

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

Tech Info

2400

15/16

HSS

• •

23.81

• • • • • •

d1 (h8)

2381

• • • • • • • •

Size Ref.

D188 A0906

DIN Taps

Vc Page #: 481 

D120 A0906

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank

Tool Holding

ISO Taps

• Broca de uso general con mango reducido • Geometría de punta estándar • Diseñado para máquinas y taladrado manual • Las longitudes totales de hélice, no incluyen punta autocentrante

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

141

Back to index Contents

Drills Panel, Single Ended

Carbide Drills

• Rigid design for through hole drilling • Ideal for rivet holes in sheet metal fabrication • Recommended for shallow holes no deeper than 1-1/4 x d1

Forets court simple tête à panneaux • Foret ridige • Pour avant trous de rivets • Profondeur maxi 1,25 X Dia

142

HSS Drills

Punte Panello, Mono Testa

• Design Rigido per fori passanti • Ideale per la foratura di lamiera di metallo • Raccomandata per fori poco profondi al massimo 1-1/4 x d1

142

Broca Chapa, Una Puna

• Diseño rígido de doble extremo para taladrado de agujeros pasantes • Ideal para agujeros de remaches en la fabricación de chapa • Recomendado para agujeros poco profundos no más de: 1-1 / 4 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Packaging & Order Quantity Size Ref.

DIN Taps

d1 (h8)

0318 0326 0409 0485

3.18 3.26 4.09 4.85

1/8 # 30 # 20 # 11

Carbide Endmills

3.18 3.26 4.09 4.85

1/8 # 30 # 20 # 11

D124 A0802

HSS

Brt

Blu

Non Ferrous

Ferrous

135° Standard

Bulk (10)

Rivet Size

Item #

3.18

3.00

3.26

3.18 (1/8")

4.09

3.97 (5/32")

4.85

4.76 (3/16")

D121 0318 D121 0326 D121 0409 D121 0485

D124 0318 D124 0326 D124 0409 D124 0485

D123 D123 0318 D123 0326 D123 0409 D123 0485

D126

3.00

Stub 118° Point (Discount Group A1002)

0318 0326 0409 0485

D121 A0802

3.18

3.26

3.18 (1/8")

4.09

3.97 (5/32")

4.85

4.76 (3/16")

D126 0326 D126 0409 D126 0485

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

142

• •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

• • • •

• •

• • • •

•

• • •

D121 D124

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills Panel, Double Ended

Carbide Drills

• Double ended rigid design for through hole drilling • Ideal for rivet holes in sheet metal fabrication • Recommended for shallow holes no deeper than 1-1/4 x d1 • Tupoint drills require fully tightened chuck jaws

Forets courts double têtes à panneaux • Forets double têtes rigide • Pour avant trous de rivets • Profondeur maxi 1,25x Dia

143

143 HSS Drills

Punte Panello, Doppia Testa

• Design Rigido per fori passanti, a doppia testa • Ideale per la foratura di lamiera di metallo • Raccomandata per fori poco profondi al massimo 1-1/4 x d1 • Le punte elicoidali richiedono ganasce di serraggio completamente serrate

Broca Chapa, Dos Puna

Size Ref.

d1 (h8)

0318 0326 0409 0485

1/8 # 30 # 20 # 11

D125

D130

A0802

HSS

HSS Co

Brt

Blu

Colour Temp

Non Ferrous

Ferrous

Tough Steels

135° Standard

Bulk (10)

Rivet Size

Item #

3.18

3.00

3.26

3.18 (1/8")

4.09

3.97 (5/32")

4.85

4.76 (3/16")

D122 0318 D122 0326 D122 0409 D122 0485

D125 0318 D125 0326 D125 0409 D125 0485

D130 0318 D130 0326 D130 0409 D130 0485

Reamers

HSS Endmills

Carbide Endmills

3.18 3.26 4.09 4.85

D122 A0802

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Packaging & Order Quantity

Tool Holding

ISO Taps

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Tech Info

• • •

•

• • • •

• •

• • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

D122 D125 D130

• • •

ISO VDI 3323

143

Back to index Contents

Drills Centre

Carbide Drills

• For drilling 60° centre holes in the end of shafts • Ensures accurate starting and centring for precision • Refer to Carbide Drill section for VHM Centre Drills

Forets à centrer

• Foret à centre 60° pour chanfreins et centrage sur arbre • Voir le chapitre forets carbure pour forets à centrer carbure

Punte Da Centro

144

HSS Drills

• Usato per generare fori guida a 60° in testa ad alberi che verranno poi sottoposti a lavorazione sui centri • Permette un accurato centraggio di precisione • Fare riferimento alla sezione Trapani in metallo duro per trapani a centri VHM

144

Broca de Centrar

• Para puntear de centros entre ejes de 60° • Asegura un punteado de precisión • Consulte la sección Taladro de Metal duro, para las Brocas de centrar VHM

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Standard Size Ref.

DIN Taps Carbide Endmills

0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1000

Type A

HSS Endmills Reamers

SCD1

D136 A0302

HSS

Brt

A Type

Plain Type

60°

DIN 333

ANSI B94-11

Item #

Type

Item #

0.80 1.00 1.25 1.60 2.00 2.50 3.15 4.00 5.00 6.30 8.00 10.00

0.80

25.00

1.10

3.15

1.00

31.50

1.30

3.15

1.25

31.50

1.60

3.15

1.60

35.50

2.00

4.00

2.00

40.00

2.50

5.00

2.50

45.00

3.10

6.30

3.15

50.00

3.90

8.00

4.00

56.00

5.00

10.00

5.00

63.00

6.30

12.50

6.30

71.00

8.00

16.00

8.00

80.00

10.10

20.00

10.00

100.00

12.80

25.00

D135 0080 D135 0100 D135 0125 D135 0160 D135 0200 D135 0250 D135 0315 D135 0400 D135 0500 D135 0630 D135 0800 D135 1000

3/64

1-1/4

3/64

1/8

5/64

1-7/8

5/64

3/16

7/64

1/4

1/8

2-1/8

1/8

5/16

3/16

2-3/4

3/16

7/16

7/32

1/2

1/4

3-1/4

1/4

5/8

5/16

3-1/2

5/16

3/4

Plain Type

0001 0002 0003 0004 0005 0006 0007 0008

D135 A0302

#1 #2 #3 #4 #5 #6 #7 #8

D136 0001 D136 0002 D136 0003 D136 0004 D136 0005 D136 0006 D136 0007 D136 0008

Set - 5 Pce

D136 SCD1

#1, #2, #3, #4 & #5

D136 SCD1

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

144

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

• •

• • • • • • • •

• •

• • • •

• •

D135 D136

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

Contents

Back to index

Drills NC Spotting

Carbide Drills

Broca de Puntear NC

• Precision drill for machine use • Rigid design for “seat” position accuracy • 90° offers hole chamfering & spotting with the one tool • 120° for spotting, matching a typical drill point • Only drill to the depth of the point • Refer to Carbide Drill section for VHM Spotting Drills

• Broca de precisión para uso en máquinas • Diseño rígido para una base de precisión • 90° permite puntear y avellanar con una única herramienta • 120° para base coincidiendo con la punta típica de las brocas • Solo taladre hasta la profundidad de la punta • Consulte la sección de Metal duro, para ver las brocas VHM

Forets NC à pointer

• utilisation sur machine • forets rigide • 90° pour les chanfreins • 120° pour chanfreins et avant trous de perçage pour les forets à 118° • Voir le chapitre carbure pour les forets NC carbure

145 HSS Drills

145

Punte Da Centro NC

Size Ref.

d1 (h8)

0300 0400 0500 0600 0800 1000 1200 1600 2000 2500

3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 25.0

3.0

4.0

5.0

6.0

8.0

10.0

102

12.0

115

16.0

131

20.0

151

25.0

Pieces

Sets

6.0, 8.0, 10.0 & 12.0

6.0, 8.0, 10.0, 12.0 & 16.0

A1124

HSS Co

TiN

90°

120°

Item #

D175 0300 D175 0400 D175 0500 D175 0600 D175 0800 D175 1000 D175 1200 D175 1600 D175 2000 D175 2500

D176 0300 D176 0400 D176 0500 D176 0600 D176 0800 D176 1000 D176 1200 D176 1600 D176 2000 D176 2500

D175 0004 D175 SDT5

D176 0004

Reamers

HSS Endmills

0004 SDT5

120°

D176

DIN Taps

Vc Page #: 481 

90°

D175

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Tool Holding

ISO Taps

• Centrino per CNC • Progettata per accurati centraggi pre-foratura • 90° offre possibilità di centraggio e smussatura in un unico utensile • 120° per un centraggio accurato pre-foratura • Utilizzare solo la profondità della punta • Fare riferimento alle punte da centro nella sezione Punte Metallo duro

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials

• •

D175 SDT5

• • • •

• • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

D175 D176

• •

ISO VDI 3323

D176 0004

Tech Info

D175 0004

• Optimal • Effective NOTE: HB & HE shanks available, subject to lead time.

145

Back to index Contents

Countersinks Three Flute, 90°, DIN 335

Carbide Drills

• De-burring • Countersinking / Counterboring screw holes • Chamfering of tapping holes • For use in machine applications Type N - For non-ferrous, Type UNI - For difficult to machine materials

Avellanadores de tres labios, 90°, DIN 335

• Desbarbado • Avellanado y Biselado de agujeros • Avellanado de agujeros para roscas • Para uso en aplicaciones de máquina (Tipo N - no ferrosos), (Tipo UNI - Para materiales difíciles de mecanizar)

Fraises à chanfreiner 3 dents 90°, DiN 335

HSS Drills

• Ebavurage de trous • Ebavurage et réalisation de fraisurage de tête de vis • Chanfreins de trous taraudés • Utilisations sur machines, Type N pour les matériaux non-ferrous, Type UNI pour les matériaux jusqu’à 850N/mm²

146

Svasatori Tre Taglienti, 90°, DIN 335

• Sbavatore • Svasatore/ Svasatore per testa viti • Smussatore per fori da filettare • Per lavorazioni su macchina CN Tipo N - Materiali non ferrosi, Tipo UNI - per materiali di difficile lavorabilità

ISO Taps

DIN 335 Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

Vc Page #: 481  Size Ref.

DIN Taps

Screw Head

Carbide Endmills HSS Endmills

0430 0530 0630 0730 0800 0840 0940 1000 1040 1150 1240 1340 1500 1650 1900 2050 2300 2500 3000 3100

4.3 5.3 6.3 7.3 8.0 8.4 9.4 10.0 10.4 11.5 12.4 13.4 15.0 16.5 19.0 20.5 23.0 25.0 30.0 31.0

1.3

M2.5

1.5

M3.5

1.8

2.0

2.2

2.5

2.8

2.9

3.2

M10

3.5

3.8

4.2

Set

0004

C108 A1108

HSS Co

Brt

TiAlN

UNI

90°

Item #

C107 0430 C107 0530 C107 0630 C107 0730 C107 0800 C107 0840 C107 0940 C107 1000 C107 1040 C107 1150 C107 1240 C107 1340 C107 1500 C107 1650 C107 1900 C107 2050 C107 2300 C107 2500 C107 3000 C107 3100

C108 0430 C108 0530 C108 0630 C108 0730 C108 0800 C108 0840 C108 0940 C108 1000 C108 1040 C108 1150 C108 1240 C108 1340 C108 1500 C108 1650 C108 1900 C108 2050 C108 2300 C108 2500 C108 3000 C108 3100

C107 0004

C108 0004

Pieces

6.3, 10.4, 16.5, 20.5

C107 A1106

Reamers 2

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

146

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• For Countersunk screws acc. to DIN 963, 964, 965, 966, 7513, 7516 • For Countersunk screws acc. to ISO 2009, 2010, 7046-1, 7046-2, 7047

• •

C107 C108

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

C108 0004

• • • • • • • • • • • • • • • • • •

C107 0004

• Optimal • Effective

Contents

Back to index

Countersinks Counterbore

Carbide Drills

• Solid pilot style • 3 flute design • Right-hand cutting • Nominal size to suit metric socket head cap screws • Cobalt High Speed Steel enables counterboring in high alloy steels

Fraises à lamer

• Pilote intégré • 3 dents • Coupe à droite • Suivant la norme des têtes de vis métriques • Multi-matières

HSS Drills

147

Svasatori Teste Brugola

• Diametro pilota • 3 Taglienti • Destro • Allargatore per teste a Brugola di dimenioni metriche nominali • HSS-Cobalto permette di lavorare acciai altamente legati

ISO Taps

Avellanadores para tornillos allen.

• Piloto guia sólido • Diseño de 3 labios • Corte a la derecha • Tamaño nominal para adaptarse a tornillos métricos de cabeza allen • El acero rápido al cobalto permite el fresado en aceros de alta aleación

Vc Page #: 481  Size

0300 0400 0500 0600 0800 1000 1200

3.0 4.0 5.0 6.0 8.0 10.0 12.0

Tool Holding

Brt

N h6

Item #

3.2

6.0

71.0

14.0

5.0

4.3

8.0

71.0

14.0

5.0

5.3

10.0

80.0

18.0

8.0

6.4

11.0

80.0

18.0

8.0

8.4

15.0

100.0

22.0

12.5

10.5

18.0

100.0

22.0

12.5

13.0

20.0

100.0

22.0

12.5

C100 0300 C100 0400 C100 0500 C100 0600 C100 0800 C100 1000 C100 1200

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • • • • • • • • • • • • • • • • •

C100

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Size Ref.

HSS Co

DIN Taps

C100 B0709

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Point Type Shank Tolerance

147

ISO TAPS • M, MF • UNC, UNF, UNEF, UN, UNS • BSW, BSF, BA, BSB • Rc (BSPT), Rp (BSPPL), Pg Series, G (BSPF) • NPT, NPTF, NPSF

Contents

ISO Taps Finder

Page M MF

Carbide Drills

UNC/UN UNF/UNEF BSW BSF, BA, BSB (Brass) G (BSPF) Rc (BSPT), Rp (BSPPL), Pg, NPT, NPTF, NPSF Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

154 162 167 174 182

HSS Brt N ≤ 1xØ

HSS TiN N ≤ 1xØ

• • • •

• • • • • • • •

155

156

168 175 183

172 187

192 193

193

195

TiN

Colour Temp

• • • • • • • •

• • • •

Sutton N VA GG AI W Ti Ni H

UNI

HSS Drills

ISO VDI P A M R K F N N S S H H

152 160 166 / 180 173 / 176 181 188 190 194

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

ISO Taps ISO

VDI^ 3323

Material Surface Finish Sutton Designation Tapping Depth Material

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers Tech Info

150

Condition

~ 0.15 %C

125

N-LH

HSS Brt

0/Size ≤ 1xØ

HSS Brt Nut ≤ 2xØ

Brt

HSS N -

N/mm2 440 640 840 910 1010 610 930 1010

• •

1180

• • • •

• •

•

680 1100

• •

•

680 810

•

610 840

•

840 610 880 570 840 460 780 210 360 270 320 460 390 320 360

•

• • • •

•

• • •

•

• • •

•

680 950 840 1180 1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

• Optimal • Effective

157 164 169 177 184

158 170 185

158 165 170 178 185

159

171 179 186

171

TiN

Brt

• • • • • • • •

• • • •

•

• •

186

191

• •

• • • • • • • •

• • • •

•

• •

• • • •

• •

• • • •

• • •

• • • •

N ≤ 1.5xØ

TiN

• • • •

• •

• • • •

• • •

• •

• • • • • • •

• • • •

•

• • • • •

• • •

•

• • • •

•

Tech Info

Reamers

• •

HSSE

Tool Holding

• • • •

Brt

DIN Taps

• • • •

HSSE Blu N ≤ 2.5xØ

TiN

Carbide Endmills

HSSE Blu N ≤ 3xØ

HSS Endmills

Brt

ISO Taps

HSS Drills

191

158 165 170 178 185

Contents

157 164 169 177 184

Carbide Drills

157 164 169 177 184

151

Back to index Contents

ISO Taps Metric, Straight Flute, N

Carbide Drills

Machos ISO Métrico, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO Métrique, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi Metrici, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a 1.5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance l3

drill ø

2.50

2.00

1.6

2.80

2.24

2.05

3.15

2.50

2.5

17.5

3.55

2.80

2.9

4.00

3.15

3.3

4.50

3.55

3.7

5.00

4.00

4.2

6.30

5.00

5.0

7.10

5.60

6.0

8.00

6.30

6.8

9.00

7.10

7.8

10.00 8.00

8.5

8.00

6.30

9.5

9.00

7.10

10.2

11.20 9.00

12.0

12.50 10.00

14.0

112

14.00 11.20

15.5

112

14.00 11.20

17.5

118

16.00 12.50

19.5

130

18.00 14.00

21.0

135

20.00 16.00

24.0

138

20.00 16.00

26.5

151

22.40 18.00

29.5

162

25.00 20.00

32.0

170

28.00 22.40

35.0

170

28.00 22.40

37.5

187

31.50 25.00

40.5

187

31.50 25.00

43.0

M 8

T901 D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

ISO 2 / 6H

Item #

T384 0200 T384 0250 T384 0300 T384 0350 T384 0400 T384 0450 T384 0500 T384 0600 T384 0700 T384 0800 T384 0900 T384 1000 T384 1100 T384 1200 T384 1400 T384 1600 T384 1800 T384 2000 T384 2200 T384 2400 T384 2700 T384 3000 T384 3300 T384 3600 T384 3900 T384 4200 T384 4500 T384 4800

T385 0200 T385 0250 T385 0300 T385 0350 T385 0400 T385 0450 T385 0500 T385 0600 T385 0700 T385 0800 T385 0900 T385 1000 T385 1100 T385 1200 T385 1400 T385 1600 T385 1800 T385 2000 T385 2200 T385 2400 T385 2700 T385 3000 T385 3300 T385 3600 T385 3900 T385 4200 T385 4500 T385 4800

T386 0200 T386 0250 T386 0300 T386 0350 T386 0400 T386 0450 T386 0500 T386 0600 T386 0700 T386 0800 T386 0900 T386 1000 T386 1100 T386 1200 T386 1400 T386 1600 T386 1800 T386 2000 T386 2200 T386 2400 T386 2700 T386 3000 T386 3300 T386 3600 T386 3900 T386 4200 T386 4500 T386 4800

T901 0200 T901 0250 T901 0300 T901 0350 T901 0400 T901 0450 T901 0500 T901 0600 T901 0700 T901 0800 T901 0900 T901 1000 T901 1100 T901 1200 T901 1400 T901 1600 T901 1800 T901 2000 T901 2200 T901 2400 • • • • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

T386 D0702

• • • • • • • • • • • •

Tech Info

P 1

• • •

Reamers

• • •

HSS Endmills

• • • • • •

Carbide Endmills

T384 T385 T386

102

ISO VDI 3323

l1 41

T385 D0702

• • •

Pitch

• • • • • • • • • • • •

DIN Taps

152

0200 M 2 x 0.4 0250 M 2.5 x 0.45 0300 M 3 x 0.5 0350 M 3.5 x 0.6 0400 M 4 x 0.7 0450 M 4.5 x 0.75 0500 M 5 x 0.8 0600 M 6 x 1 0700 M 7 x 1 0800 M 8 x 1.25 0900 M 9 x 1.25 1000 M 10 x 1.5 1100 M 11 x 1.5 1200 M 12 x 1.75 1400 M 14 x 2 1600 M 16 x 2 1800 M 18 x 2.5 2000 M 20 x 2.5 2200 M 22 x 2.5 2400 M 24 x 3 2700 M 27 x 3 3000 M 30 x 3.5 3300 M 33 x 3.5 3600 M 36 x 4 3900 M 39 x 4 4200 M 42 x 4.5 4500 M 45 x 4.5 4800 M 48 x 5

• • •

Size Ref.

T384 D0702

• Optimal • Effective

Contents

Back to index

ISO Taps Metric, Straight Flute, N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Size Ref.

5200

Pitch

M 52 x 5

200

drill ø

35.50 28.00

47.0

0014

Tap & Drill Sets 14 piece set (intermediate)

SDT1

28 piece set (taper, inter, bott) (Discount Group Z0304)

T384

T385

T386

T901

D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

ISO 2 / 6H

Item #

T384 5200

T385 5200

T386 5200

•

T385 0014

Taps: M3, M4, M5, M6, M8, M10, M12 Drills: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2mm

T901 SDT1

HSS Endmills

Carbide Endmills

Taps: M3, M4, M5, M6, M8, M10, M12 Drills: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2mm

T901 SDT1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T384 T385 T386

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

T385 0014

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

ISO Maschi Metrici, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a 1.5 x d1

153

Back to index Contents

ISO Taps Metric, Straight Flute, N

Carbide Drills

Machos ISO Métrico, Ranuras Rectas, N, TiN • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

drill ø

2.50

2.00

1.6

2.80

2.24

2.05

3.15

2.50

2.5

3.55

2.80

2.9

4.00

3.15

3.3

4.50

3.55

3.7

5.00

4.00

4.2

6.30

5.00

5.0

7.10

5.60

6.0

8.00

6.30

6.8

9.00

7.10

7.8

10.00 8.00

8.5

8.00

6.30

9.5

9.00

7.10

10.2

11.20 9.00

12.0

12.50 10.00

14.0

112

14.00 11.20

15.5

112

14.00 11.20

17.5

118

16.00 12.50

19.5

130

18.00 14.00

21.0

135

20.00 16.00

24.0

138

20.00 16.00

26.5

151

22.40 18.00

29.5

162

25.00 20.00

32.0

170

28.00 22.40

35.0

170

28.00 22.40

37.5

187

31.50 25.00

40.5

187

31.50 25.00

43.0

200

35.50 28.00

47.0

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

154

HSS

TiN

Intermediate

Bottoming

ISO 2 / 6H

Item #

T387 0200 • T387 0300 T387 0350 T387 0400 • T387 0500 T387 0600 • T387 0800 • T387 1000 • T387 1200 T387 1400 T387 1600 T387 1800 T387 2000 • • • • • • • • • • •

T388 0200 • T388 0300 T388 0350 T388 0400 • T388 0500 T388 0600 T388 0700 T388 0800 • T388 1000 • T388 1200 T388 1400 T388 1600 T388 1800 T388 2000 • • • • • • • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • •

• •

Tech Info

P 1

• •

Reamers

• •

HSS Endmills

• •

Carbide Endmills

T387 T388

102

ISO VDI 3323

l1 41

T388 D0706

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

Pitch

• • • • • • • • • • • • • • • •

DIN Taps

• •

Size Ref.

T387 D0706

• Optimal • Effective

Contents

Back to index

ISO Taps Metric, Straight Flute, N, Left Hand

Carbide Drills

Machos ISO Métrico, Ranuras Rectas, N, Izquierda • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO Métrique, goujure droite, type N, à gauche • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

Pitch

drill ø

3.15

2.50

2.5

4.00

3.15

3.3

5.00

4.00

4.2

6.30

5.00

5.0

8.00

6.30

6.8

10.00 8.00

8.5

9.00

10.2

7.10

11.20 9.00

12.0

12.50 10.00

14.0

14.00 11.20

15.5

14.00 11.20

17.5

T391 D0702

HSS

Brt

Left Hand

Taper

Intermediate

Bottoming

ISO 2 / 6H LH

Item #

T389 0300 T389 0400 T389 0500 T389 0600 T389 0800 T389 1000 T389 1200 T389 1400 T389 1600 T389 1800 T389 2000

T390 0300 T390 0400 T390 0500 T390 0600 T390 0800 T390 1000 T390 1200 T390 1400 T390 1600 T390 1800 T390 2000

T391 0300 T391 0400 T391 0500 T391 0600 T391 0800 T391 1000 T391 1200 T391 1400 T391 1600 T391 1800 T391 2000

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T389 T390 T391

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

M 3 x 0.5 48 M 4 x 0.7 53 M 5 x 0.8 58 66 M6 x 1 M 8 x 1.25 72 M 10 x 1.5 80 M 12 x 1.75 89 95 M 14 x 2 102 M 16 x 2 M 18 x 2.5 112 M 20 x 2.5 112

T390 D0702

DIN Taps

Size Ref.

T389 D0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

ISO Maschi Metrici, Elica dritta, N, Sinistri • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

155

Back to index Contents

ISO Taps Metric, Straight Flute, Oversize

Carbide Drills

Machos ISO Métrico, Ranuras Rectas, N, Sobremedida • Sobremedida amplia para adaptarse a componentes para galvanizado • Uso general, materiales hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1 • Disponibles bajo demanda

• Oversize allowance to suit components for galvanize plating • General purpose use, materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1 • Taper and inter leads available on request

HSS Drills

Tarauds ISO Métrique, goujure droite, type N, surcôté • Surcoté pour taraudage avant galvanisation • Application générale, adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

ISO Taps

ISO Maschi Metrici, Elica dritta, Maggiorati • Maggiorati per eventuali trattamenti di zincatura • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1 • Rastremazione su richiesta

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref.

DIN Taps

drill ø

x 1.5 M12 +0.4 x 1.75 M16 +0.4 x 2 M20 +0.4 x 2.5 M24 +0.45 x 3

8.0

6.3

9.0

8.9

1000 1200 1600 2000 2400

Pitch

M10 +0.4

T392 D0702 HSS Brt

N Left Hand Bottoming ISO 2 / 6H LH

Item #

9.0

7.1

10.0

10.6

112

12.5

10.0

13.0

14.4

118

16.0

12.5

16.0

17.9

130

18.0

14.0

18.0

21.5

T392 1000 T392 1200 T392 1600 T392 2000 T392 2400

Carbide Endmills HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • •

•

• •

T392

• • • •

Tech Info

156

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps Metric, Gun, N

Carbide Drills

Machos ISO Métrico, Entrada Corregida • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes • Profundidades de hasta aprox 3 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to approx 3 x d1

HSS Drills

Tarauds ISO Métrique, Gun, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous débouchants • Pour taraudage sur machines • Prodondeur de taraudage jusqu’à 3 x d1

ISO Taps

ISO Maschi Metrici, Gun, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a circa 3 x d1

Pitch

drill ø

2.80

2.24

2.05

3.15

2.50

2.5

17.5

3.55

2.80

2.9

4.00

3.15

3.3

5.00

4.00

4.2

6.30

5.00

5.0

8.00

6.30

6.8

10.00 8.00

8.5

9.00

10.2

7.10

11.20 9.00

12.0

12.50 10.00

14.0

14.00 11.20

15.5

14.00 11.20

17.5

16.00 12.50

19.5

18.00 14.00

21.0

20.00 16.00

26.5

HSSE

Brt

Blu

TiN

Intermediate

ISO 2 / 6H

Item #

T393 0250 T393 0300 T393 0350 T393 0400 T393 0500 T393 0600 T393 0800 T393 1000 T393 1200 T393 1400 T393 1600 T393 1800 T393 2000 • • •

T394 0250 T394 0300 T394 0350 T394 0400 T394 0500 T394 0600 T394 0800 T394 1000 T394 1200 T394 1400 T394 1600 T394 1800 T394 2000 T394 2200 T394 2400 T394 3000

• T395 0300 T395 0350 T395 0400 T395 0500 T395 0600 T395 0800 T395 1000 T395 1200 • T395 1600 T395 1800 T395 2000 • • •

Tool Holding

HSSE

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*HSS >20mm • Available on request as special manufacture. Subject to lead time.

• • •

• •

• • • •

• • • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • •

T393 T394 T395

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

M 2.5 x 0.45 45 M 3 x 0.5 48 M 3.5 x 0.6 50 M 4 x 0.7 53 M 5 x 0.8 58 66 M6 x 1 M 8 x 1.25 72 M 10 x 1.5 80 M 12 x 1.75 89 95 M 14 x 2 102 M 16 x 2 M 18 x 2.5 112 M 20 x 2.5 112 M 22* x 2.5 118 130 M 24* x 3 M 30* x 3.5 138

T395 D0706

DIN Taps

0250 0300 0350 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000 2200 2400 3000

T394 D0702

Carbide Endmills

Size Ref.

T393 D0702

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

157

Back to index Contents

ISO Taps Metric, Spiral Flute, N

Carbide Drills

Machos ISO Métrico, Helicoidales • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades de hasta aprox 2,5 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to approx 2.5 x d1

HSS Drills

Tarauds ISO Métrique, Hélicoïdal, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 2.5 x d1 ISO Maschi Metrici, Tagliente a Elica, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a circa 2,5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref.

DIN Taps

Carbide Endmills HSS Endmills

0250 0300 0350 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000 2200 2400 3000

Pitch

drill ø

2.80

2.24

2.05

3.15

2.50

2.5

17.5

3.55

2.80

2.9

4.00

3.15

3.3

5.00

4.00

4.2

6.30

5.00

5.0

8.00

6.30

6.8

10.00 8.00

8.5

9.00

10.2

11.20 9.00

12.0

12.50 10.00

14.0

14.00 11.20

15.5

14.00 11.20

17.5

16.00 12.50

19.5

18.00 14.00

21.0

20.00 16.00

26.5

7.10

T397

T396

T398

D0702

D0706

HSSE

Brt

Blu

TiN

Bottoming

ISO 2 / 6H

Item #

T397 0250 T397 0300 T397 0350 T397 0400 T397 0500 T397 0600 T397 0800 T397 1000 T397 1200 T397 1400 T397 1600 T397 1800 T397 2000 T397 2200 T397 2400 T397 3000

• T396 0300 T396 0350 T396 0400 T396 0500 T396 0600 T396 0800 T396 1000 T396 1200 T396 1400 T396 1600 T396 1800 T396 2000 T396 2200 T396 2400 T396 3000

• T398 0300 • T398 0400 T398 0500 T398 0600 T398 0800 T398 1000 T398 1200 • T398 1600 T398 1800 T398 2000 • • •

Reamers M

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*HSS >20mm • Available on request as special manufacture. Subject to lead time.

• • •

•

• • • •

• • • • •

• • • • • •

• • • • • • • • •

•

T397 T396 T398

• • • • • • • • • • • • • • • • • • •

Tech Info

158

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps Metric, Forming, Single Coolant Groove

characteristics • Through or blind holes • Depths up to approx 1.5 x d1 • TiN for longer tool life

Carbide Drills

Machos ISO Métrico, Laminación, Ranura de Refrigeración • Para la conformación en frío de roscas en materiales con buenas características de elongación • Agujeros pasantes o ciegos • Profundidades de hasta aprox 1.5 x d1 • TiN para una mayor vida útil de la herramienta

• For cold forming of threads in materials with good flow

HSS Drills

Tarauds ISO Métrique, par déformation, avec une rainure de lubrification • Taraudage par déformation • Pour trous borgnes et débouchants • Profondeur de taraudage jusqu’à 1.5 x d1 • Revêtement TiN pour une meilleure durée de vie

Pitch

drill ø

2.80

2.24

2.3

3.15

2.50

2.8

17.5

3.55

2.80

3.2

4.00

3.15

3.7

5.00

4.00

4.6

6.30

5.00

5.5

8.00

6.30

7.4

10.00 8.00

9.3

9.00

7.10

11.2

10.00 8.00

9.5

9.00

11.4

7.00

HSSE

Brt

TiN

Single Coolant Groove ≥ M3 Single Coolant Groove ≥ M3 Short

Short

GH4 / 6H

Item #

T399 0250 T399 0300 T399 0350 T399 0400 T399 0500 T399 0600 T399 0800 T399 1000 T399 1200

• T400 0300 • T400 0400 T400 0500 T400 0600 • • •

T637 T637 1005 T637 1206

• •

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

• • •

• • • • • • • •

T399 T400

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

1005 MF 10 x 1 1206 MF 12 x 1.25

l1 45

T400 D0706

DIN Taps

0250 M 2.5 x 0.45 0300 M 3 x 0.5 0350 M 3.5 x 0.6 0400 M 4 x 0.7 0500 M 5 x 0.8 0600 M 6 x 1 0800 M 8 x 1.25 1000 M 10 x 1.5 1200 M 12 x 1.75

T399 D0702

Carbide Endmills

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

ISO Maschi Metrici, Rullare, Scarico Unico • Maschio a rullare per materiali di buona elasticità • Fori ciechi & passanti • Profondità fino a circa 1,5 x d1 • TiN per aumentare vita utensile

• Optimal • Effective

159

Back to index Contents

ISO Taps Metric Fine, Straight Flute, N

Carbide Drills

Machos ISO Métrico Fino, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO Métrique fin, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi Metrici Fine, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

ISO Taps Tool Holding

drill ø

4.5

6.3

5.0

5.3

8.0

6.3

7.0

8.0

6.3

7.3

10.0

8.0

9.3

10.0

8.0

9.0

10.0

8.0

8.8

9.0

7.1

11.0

9.0

7.1

10.8

9.0

7.1

10.5

11.2

9.0

13.0

11.2

9.0

12.8

11.2

9.0

12.5

10.0

15.0

12.5

10.0

14.8

12.5

10.0

14.5

14.0

11.2

16.8

14.0

11.2

16.5

14.0

11.2

18.8

14.0

11.2

18.5

14.0

11.2

18.0

16.0

12.5

20.5

16.0

12.5

20.0

18.0

14.0

22.5

18.0

14.0

22.0

18.0

14.0

23.5

20.0

16.0

25.0

20.0

16.0

28.5

M 8

T902 D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

ISO 2 / 6H

Item #

• • T401 0805 • • T401 1005 T401 1006 T401 1205 T401 1206 T401 1207 • T401 1406 T401 1407 • • T401 1607 • T401 1807 • T401 2007 • T401 2207 • • T401 2408 T401 2507 • T401 3007

• • T402 0805 • • T402 1005 T402 1006 T402 1205 T402 1206 T402 1207 • T402 1406 T402 1407 • • T402 1607 • T402 1807 • T402 2007 • T402 2207 • • T402 2408 T402 2507 • T402 3007

T403 0503 T403 0604 T403 0805 T403 0804 T403 1004 T403 1005 T403 1006 T403 1205 T403 1206 T403 1207 T403 1405 T403 1406 T403 1407 T403 1605 T403 1606 T403 1607 T403 1806 T403 1807 T403 2006 T403 2007 T403 2008 T403 2207 T403 2208 T403 2407 T403 2408 T403 2507 T403 2708 T403 3007

• • T902 0805 • • T902 1005 T902 1006 • T902 1206 T902 1207 • T902 1406 T902 1407 • • T902 1607 • T902 1807 • T902 2007 • T902 2207 • • T902 2408 • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals * Alternative Metric Fine ** Conduit Metric

T403 D0702

• • •

Tech Info

T402 D0702

• • •

Reamers

sq 4.0

• • •

HSS Endmills

d2 5.0

• • • • • •

Carbide Endmills

T401 T402 T403

l3 22

ISO VDI 3323

l2 16

T401 D0702

• • • • • • • • • • • •

• • •

Pitch

MF 5 x 0.5 58 MF 6 x 0.75 66 72 MF 8 x 1* MF 8 x 0.75 72 MF 10 x 0.75 80 80 MF 10 x 1† MF 10 x 1.25* 80 89 MF 12 x 1 MF 12 x 1.25 89 MF 12 x 1.5* 89 95 MF 14 x 1 MF14 x 1.25† 95 MF 14 x 1.5* 95 102 MF 16 x 1 MF 16 x 1.25 102 MF 16 x 1.5* 102 MF 18 x 1.25 112 MF 18 x 1.5* 112 MF 20 x 1.25 112 MF 20 x 1.5** 112 MF 20 x 2* 112 MF 22 x 1.5 118 118 MF 22 x 2 MF 24 x 1.5 130 MF 24 x 2* 130 MF 25 x 1.5** 130 135 MF 27 x 2 MF 30 x 1.5 138

• • • • • • • • • • • •

DIN Taps

160

0503 0604 0805 0804 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1606 1607 1806 1807 2006 2007 2008 2207 2208 2407 2408 2507 2708 3007

• • •

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

• Optimal • Effective

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

†

Limit & Nut Tolerance: ISO 1 / 4H

Contents

Back to index

ISO Taps Metric Fine, Straight Flute, N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Pitch

138 3008 MF 30 x 2 3207 MF 32 x 1.5** 151 4007 MF 40 x 1.5** 170

drill ø

20.0

16.0

28.0

22.4

18.0

30.5

28.0

22.4

38.5

10.0

8.0

9.0

7.1

10.8

11.2

9.0

12.8

14.0

11.2

16.5

Spark Plug

1005 1206 1406 1807

T403

T902

D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

ISO 2 / 6H

Item #

T401 3008 T401 3207 T401 4007

T402 3008 T402 3207 T402 4007

T403 3008 T403 3207 T403 4007

• • •

T401 1005 T401 1206 T401 1406 T401 1807

T402 1005 T402 1206 T402 1406 T402 1807

T403 1005 T403 1206 T403 1406 T403 1807

T902 1005 T902 1206 T902 1406 T902 1807

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals * Alternative Metric Fine ** Conduit Metric

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T401 T402 T403

• • •

ISO VDI 3323

• Optimal • Effective

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

†

Limit & Nut Tolerance: ISO 1 / 4H

Tech Info

Reamers

HSS Endmills

80 MF 10 x 1† MF 12 x 1.25 89 MF 14 x 1.25† 95 MF 18 x 1.5 112

T402 D0702

DIN Taps

Size Ref.

T401 D0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

ISO Maschi Metrici Fine, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

161

Back to index Contents

ISO Taps Metric Fine, Straight Flute, N

Carbide Drills

Machos ISO Métrico Fino, Ranuras Rectas, N, TiN • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO Métrique, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi Metrici Fine, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

drill ø

4.5

6.3

5.0

5.3

8.0

6.3

7.3

8.0

6.3

7.0

10.0

8.0

9.3

10.0

8.0

9.0

10.0

8.0

8.8

9.0

7.1

11.0

9.0

7.1

10.8

9.0

7.1

10.5

11.2

9.0

13.0

11.2

9.0

12.8

11.2

9.0

12.5

10.0

15.0

12.5

10.0

14.8

12.5

10.0

14.5

14.0

11.2

16.8

14.0

11.2

16.5

14.0

11.2

18.8

14.0

11.2

18.5

14.0

11.2

18.0

16.0

12.5

20.5

16.0

12.5

20.0

18.0

14.0

22.5

18.0

14.0

22.0

18.0

14.0

23.5

20.0

16.0

25.0

20.0

16.0

28.5

M 8

HSS

TiN

Intermediate

Bottoming

ISO 2 / 6H

Item #

• • • T404 0805 • T404 1005 T404 1006 • T404 1206 T404 1207

• • • T405 0805 • T405 1005 T405 1006 • T405 1206 T405 1207 • T405 1406 T405 1407 • • T405 1607 • • • • • • • • • • •

T404 1406 T404 1407

• • • •

• • • N

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

162

T405 D0706

• • • • • •

• • • • • • • •

• •

Tech Info

• •

Reamers

sq 4.0

• •

HSS Endmills

d2 5.0

• •

Carbide Endmills

T404 T405

l3 22

ISO VDI 3323

l2 16

• •

Pitch

MF 5 x 0.5 58 MF 6 x 0.75 66 MF 8 x 0.75 72 72 MF 8 x 1* MF 10 x 0.75 80 80 MF 10 x 1† MF 10 x 1.25* 80 89 MF 12 x 1 MF 12 x 1.25 89 MF 12 x 1.5* 89 95 MF 14 x 1 MF 14 x 1.25† 95 MF 14 x 1.5* 95 102 MF 16 x 1 MF 16 x 1.25 102 MF 16 x 1.5* 102 MF 18 x 1.25 112 MF 18 x 1.5* 112 MF 20 x 1.25 112 MF 20 x 1.5** 112 MF 20 x 2* 112 MF 22 x 1.5 118 118 MF 22 x 2 MF 24 x 1.5 130 MF 24 x 2* 130 MF 25 x 1.5** 130 135 MF 27 x 2 MF 30 x 1.5 138

• • • • • • • • • • • • • • • •

DIN Taps

0503 0604 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1606 1607 1806 1807 2006 2007 2008 2207 2208 2407 2408 2507 2708 3007

• •

Size Ref.

T404 D0706

• Optimal • Effective

S Titanium & Super Alloys H Hard Materials

* Alternative Metric Fine ** Conduit Metric • Available on request as special manufacture. Subject to lead time.

†

Limit & Nut Tolerance: ISO 1 / 4H

Contents

Back to index

ISO Taps Metric Fine, Straight Flute, N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Pitch

drill ø

20.0

16.0

28.0

22.4

18.0

30.5

28.0

22.4

38.5

10.0

8.0

9.0

7.1

10.8

11.2

9.0

12.8

14.0

11.2

16.5

Spark Plug

1005 1206 1406 1807

HSS

TiN

Intermediate

Bottoming

ISO 2 / 6H

Item #

• • •

T404 1005 T404 1206 T404 1406

T405 1005 T405 1206 T405 1406

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • •

• • • • • • • •

• •

• • • • • • • • • • • • • • • •

T404 T405

• •

ISO VDI 3323

• Optimal • Effective

S Titanium & Super Alloys H Hard Materials

* Alternative Metric Fine ** Conduit Metric • Available on request as special manufacture. Subject to lead time.

Tech Info

Reamers

HSS Endmills

80 MF 10 x 1† MF 12 x 1.25 89 MF 14 x 1.25† 95 MF 18 x 1.5 112

T405 D0706

DIN Taps

138 3008 MF 30 x 2 3207 MF 32 x 1.5** 151 4007 MF 40 x 1.5** 170

T404 D0706

Carbide Endmills

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

†

Limit & Nut Tolerance: ISO 1 / 4H

163

Back to index Contents

ISO Taps Metric Fine, Gun, N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to approx 3 x d1

HSS Drills

Tarauds ISO Métrique Fin, Gun, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous débouchants • Pour taraudage sur machines • Prodondeur de taraudage jusqu’à 3 x d1 ISO Maschi Metrici Fine, Gun, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a circa 3 x d1

ISO Taps

Machos ISO Métrico Fino, Entrada Corregida • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes • Profundidades de hasta aprox 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref.

DIN Taps

Carbide Endmills

0503 0604 0805 1005 1006 1206 1207 1407 1607 1807 2007 2207

drill ø

5.0

4.0

4.5

6.3

5.0

5.3

8.0

6.3

7.0

10.0

8.0

9.0

10.0

8.0

8.8

9.0

7.1

10.8

9.0

7.1

10.5

11.2

9.0

12.5

102

12.5

10.0

14.5

112

14.0

11.2

16.5

112

14.0

11.2

18.5

118

16.0

12.5

20.5

Pitch

MF 5 x 0.5 MF 6 x 0.75 MF 8 x 1 MF 10 x 1 MF 10 x 1.25 MF 12 x 1.25 MF 12 x 1.5 MF 14 x 1.5 MF 16 x 1.5 MF 18 x 1.5 MF 20 x 1.5 MF 22 x 1.5

T406

T407

T408

D0702

D0706

HSSE

Brt

Blu

TiN

Intermediate

ISO 2 / 6H

Item #

• • T406 0805 • T406 1006 • T406 1207 • • • • •

T407 0503 T407 0604 T407 0805 T407 1005 T407 1006 T407 1206 T407 1207 T407 1407 T407 1607 T407 1807 T407 2007 T407 2207

• • T408 0805 • T408 1006 • T408 1207 • • • • •

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• •

• • • •

• • • • • • •

• • • • • • • • •

•

T406 T407 T408

• • • • • • • • • • • • • • • • • • • •

Tech Info

164

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps Metric Fine, Spiral Flute, N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to approx 2.5 x d1

HSS Drills

Tarauds ISO Métrique Fin, Hélicoïdal, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes • Pour taraudage sur machines • Prodondeur de taraudage jusqu’à 2.5 x d1 ISO Maschi Metrici Fine, Tagliente a Elica, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a circa 2,5 x d1

drill ø

5.0

4.0

4.5

6.3

5.0

5.3

8.0

6.3

7.0

10.0

8.0

9.0

10.0

8.0

8.8

9.0

7.1

10.8

9.0

7.1

10.5

11.2

9.0

12.8

11.2

9.0

12.5

102

12.5

10.0

14.5

112

14.0

11.2

16.5

112

14.0

11.2

18.5

118

16.0

12.5

20.5

T411 D0706

HSSE

Brt

TiN

Tool Holding

l1 58

Pitch

Bottoming

ISO 2 / 6H

Item #

T409 0503 T409 0604 T409 0805 T409 1005 T409 1006 T409 1206 T409 1207 T409 1406 T409 1407 T409 1607 T409 1807 T409 2007 T409 2207

• • T411 0805 • T411 1006 • T411 1207 • • • • • •

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • •

• • • •

• • • • • •

• • • • • • • • • • • • •

T409 T411

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

MF 5 x 0.5 MF 6 x 0.75 MF 8 x 1 MF 10 x 1 MF 10 x 1.25 MF 12 x 1.25 MF 12 x 1.5 MF 14 x 1.25 MF 14 x 1.5 MF 16 x 1.5 MF 18 x 1.5 MF 20 x 1.5 MF 22 x 1.5

T409 D0702

DIN Taps

0503 0604 0805 1005 1006 1206 1207 1406 1407 1607 1807 2007 2207

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Carbide Endmills

Size Ref.

ISO Taps

Machos ISO Métrico Fino, Helicoidales • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades de hasta aprox 2,5 x d1

• Optimal • Effective

165

Back to index Contents

ISO Taps UNC, Straight Flute, N

Carbide Drills

Machos UNC, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds UNC, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi UNC, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

UNC

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Brt

Taper

Intermediate

Bottoming

Set

Item #

Limit

Item #

2.80

2.24

GH2

14.5

3.15

2.50

GH2

3.15

2.50

GH2

17.5

3.55

2.80

GH3

4.50

3.55

GH3

5.00

4.00

GH4

5.00

4.00

GH4

5.60

4.50

GH4

6.30

5.00

GH3

T414 0251 T414 0284 T414 0318 T414 0351 T414 0417 T414 0476 T414 0483 T414 0549 T414 0635

T415 0251 T415 0284 T415 0318 T415 0351 T415 0417 T415 0476 T415 0483 T415 0549 T415 0635

6.30

5.00

GH4

8.00

6.30

GH3

T414 0794

T415 0794

8.00

6.30

GH5

10.00 8.00

GH5

8.00

6.30

GH3

9.00

7.10

GH6

11.20 9.00

GH6

12.50 10.00

GH6

14.00 11.20

GH7

16.00 12.50

GH7

18.00 14.00

GH7

20.00 16.00

GH8

22.40 18.00

GH8

28.00 22.40

GH8

T414 0953 T414 1111 T414 1270 T414 1429 T414 1588 T414 1905 T414 2223 T414 2540 T414 2858 T414 3175 T414 3810

T415 0953 T415 1111 T415 1270 T415 1429 T415 1588 T415 1905 T415 2223 T415 2540 T415 2858 T415 3175 T415 3810

T416 0251 T416 0284 T416 0318 T416 0351 T416 0417 T416 0476 T416 0483 T416 0549 T416 0635 T416 0636 T416 0794 T416 0795 T416 0953 T416 1111 T416 1270 T416 1429 T416 1588 T416 1905 T416 2223 T416 2540 T416 2858 T416 3175 T416 3810

T903 0284 T903 0318 T903 0351 T903 0417 T903 0476 T903 0483 T903 0549 T903 0635 T903 0794 T903 0953 T903 1111 T903 1270 T903 1429 T903 1588 T903 1905 T903 2223 T903 2540 • T903 3175 T903 3810

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals * Alternative Limit

HSS

Brt

M 8

HSS

Brt

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

Tech Info

HSS

Brt

• • •

Reamers

HSS

• • • • • • • • • • • •

HSS Endmills

T903 D0702

• • • • • •

Carbide Endmills

T414 T415 T416

T416 D0702

ISO VDI 3323

T415 D0702

• • •

TPI

45 #3 48 48 #4 40 48 #5 40 50 #6 32 53 #8 32 3/16 24 (UNS) 58 58 #10 24 62 #12 24 66 1/4 20 66 1/4* 20 72 5/16* 18 72 5/16 18 80 3/8 16 85 7/16 14 89 1/2 13 95 9/16 12 5/8 11 102 3/4 10 112 118 7/8 9 130 1 8 138 1-1/8 7 151 1-1/4 7 170 1-1/2 6

• • • • • • • • • • • •

DIN Taps

166

0251 0284 0318 0351 0417 0476 0483 0549 0635 0636 0794 0795 0953 1111 1270 1429 1588 1905 2223 2540 2858 3175 3810

• • •

Size Ref.

T414 D0702

• Optimal • Effective

Contents

Back to index

ISO Taps UNC, Straight Flute, N

Carbide Drills

Machos ISO UNC, Ranuras Rectas, N, TiN • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO UNC, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

Limit

drill ø

2.80

2.24

GH2

2.1

14.5

3.15

2.50

GH2

2.3

3.15

2.50

GH2

2.6

17.5

3.55

2.80

GH3

2.8

4.50

3.55

GH3

3.4

5.00

4.00

GH4

3.7

5.00

4.00

GH4

3.8

5.60

4.50

GH4

4.5

6.30

5.00

GH4

5.1

6.30

5.00

GH3

5.1

8.00

6.30

GH3

6.6

8.00

6.30

GH5

6.6

10.00 8.00

GH5

8.0

8.00

6.30

GH3

9.4

9.00

7.10

GH6

10.8

11.20 9.00

GH6

12.2

12.50 10.00

GH6

13.5

14.00 11.20

GH7

16.5

16.00 12.50

GH7

19.5

18.00 14.00

GH7

22.2

20.00 16.00

GH8

25.0

22.40 18.00

GH8

28.0

28.00 22.40

GH8

34.0

HSS

TiN

Intermediate

Bottoming

Item #

• • • T417 0351 T417 0417 • T417 0483 • T417 0635

• • • T418 0351 T418 0417 • T418 0483 • T418 0635 • • T418 0794 T418 0953 T418 1111 T418 1270 • T418 1588 T418 1905 • • • • •

T417 0794 T417 0953 T417 1111 T417 1270 • T417 1588 T417 1905 • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

* Alternative Limit • Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • •

• •

Tech Info

Reamers

30 32

• • • • • • • • • • • • • • • •

T417 T418

ISO VDI 3323

l2 10

HSS

DIN Taps

TPI

T418 D0706

Carbide Endmills

0251 0284 0318 0351 0417 0476 0483 0549 0635 0636 0794 0795 0953 1111 1270 1429 1588 1905 2223 2540 2858 3175 3810

T417 D0706

HSS Endmills

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

UNC

ISO Taps

ISO Maschi UNC, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

• Optimal • Effective

167

Back to index Contents

ISO Taps UNC, Straight Flute, N, Left Hand

Carbide Drills

Machos ISO UNC, Ranuras Rectas, N, Izquierda • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, UNC, goujure droite, type N, coupe à gauche • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi UNC, Elica dritta, N, Sinistri • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

UNC

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Size Ref.

DIN Taps

Carbide Endmills

0635 1/4 0794 5/16 0953 3/8 1111 7/16 1270 1/2 1429 9/16 1588 5/8 1905 3/4 2223 7/8 1 2540 2858 1-1/8 3175 1-1/4 3810 1-1/2

Limit drill ø

20 18 16 14 13 12 11 10 9 8 7 7 6

6.30

5.00

GH4

5.1

8.00

6.30

GH5

6.6

10.00 8.00

GH5

8.0

8.00

6.30

GH5

9.4

9.00

7.10

GH6

10.8

11.20 9.00

GH6

12.2

102

12.50 10.00

GH6

13.5

112

14.00 11.20

GH7

16.5

118

16.00 12.50

GH7

19.5

130

18.00 14.00

GH7

22.2

138

20.00 16.00

GH8

25.0

151

22.40 18.00

GH8

28.0

170

28.00 22.40

GH8

34.0

T420

T421

D0702

HSS

Brt

Left Hand

Taper

Intermediate

Bottoming

2B LH

Item #

T419 0635 T419 0794 T419 0953 T419 1111 T419 1270 T419 1429 T419 1588 T419 1905 • • • • •

T420 0635 T420 0794 T420 0953 T420 1111 T420 1270 T420 1429 T420 1588 T420 1905 • • • • •

T421 0635 T421 0794 T421 0953 T421 1111 T421 1270 T421 1429 T421 1588 T421 1905 • • • • •

HSS Endmills

TPI

T419 D0702

Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • •

• • • • • • • • • • • •

• • •

• • • • • •

T419 T420 T421

• • • • • • • • • • • •

Tech Info

168

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps UNC, Gun, N

Carbide Drills

Machos ISO UNC, Entrada Corregida • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes • Profundidades de hasta aprox 3 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to approx 3 x d1

HSS Drills

Tarauds UNC, Gun, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

UNC

ISO Taps

ISO Maschi UNC, Gun, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a circa 3 x d1

0284 0351 0417 0483 0549 0635 0794 0953 1111 1270 1588 1905 2223 2540

HSSE

Brt

Blu

TiN

Intermediate

Tool Holding

T424 D0706

TPI

Limit

drill ø

Item #

40 32 32 24 24 20 18 16 14 13 11 10 9 8

14.5

3.15

2.50

GH2

2.3

17.5

3.55

2.80

GH3

2.8

4.50

3.55

GH3

3.4

5.00

4.00

GH4

3.8

5.60

4.50

GH4

4.5

6.30

5.00

GH4

5.1

8.00

6.30

GH5

6.6

10.00 8.00

GH5

8.0

8.00

6.30

GH5

9.4

9.00

7.10

GH6

10.8

102

12.50 10.00

GH6

13.5

112

14.00 11.20

GH7

16.5

118

16.00 12.50

GH7

19.5

130

18.00 14.00

GH7

22.2

T422 0284 T422 0351 T422 0417 T422 0483 • T422 0635 T422 0794 T422 0953 T422 1111 T422 1270 T422 1588 T422 1905 • •

T423 0284 T423 0351 T423 0417 T423 0483 T423 0549 T423 0635 T423 0794 T423 0953 T423 1111 T423 1270 T423 1588 T423 1905 T423 2223 T423 2540

• T424 0351 T424 0417 T424 0483 • T424 0635 T424 0794 T424 0953 • T424 1270 T424 1588 T424 1905 • •

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• •

• • • •

• • • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • •

T422 T423 T424

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

#4 #6 #8 #10 #12 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1

T423 D0702

DIN Taps

Size Ref.

T422 D0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

169

Back to index Contents

ISO Taps UNC, Spiral Flute, N

Carbide Drills

Machos ISO UNC, Helicoidales • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades de hasta aprox 2,5 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to approx 2.5 x d1

HSS Drills

Tarauds ISO, UNC, Hélicoïdal, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes • Pour taraudage sur machines • Prodondeur de taraudage jusqu’à 2.5 x d1 ISO Maschi UNC, Tagliente a Elica, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a circa 2,5 x d1

UNC

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance Size Ref.

DIN Taps

Carbide Endmills

0218 0284 0351 0417 0483 0635 0794 0953 1111 1270 1588 1905 2223 2540

#2 #4 #6 #8 #10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1

T425

T426

T427

D0702

D0706

HSSE

Brt

Blu

TiN

Bottoming

TPI

Limit

drill ø

Item #

56 40 32 32 24 20 18 16 14 13 11 10 9 8

2.5

2.0

GH2

1.85

3.15

2.50

GH2

2.3

3.55

2.80

GH3

2.8

4.50

3.55

GH3

3.4

5.00

4.00

GH4

3.8

6.30

5.00

GH4

5.1

8.00

6.30

GH5

6.6

10.00 8.00

GH5

8.0

8.00

6.30

GH5

9.4

9.00

7.10

GH6

10.8

102

12.50 10.00

GH6

13.5

112

14.00 11.20

GH7

16.5

118

16.00 12.50

GH7

19.5

130

18.00 14.00

GH7

22.2

T425 0218 T425 0284 T425 0351 T425 0417 T425 0483 T425 0635 T425 0794 T425 0953 T425 1111 T425 1270 T425 1588 T425 1905 T425 2223 T425 2540

• • • • • T426 0635 T426 0794 T426 0953 T426 1111 T426 1270 T426 1588 T426 1905 • •

• • • • T427 0483 T427 0635 T427 0794 T427 0953 T427 1111 T427 1270 T427 1588 T427 1905 • •

HSS Endmills Reamers M

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

•

• • • •

• • • • •

• • • • • •

• • • • • • • • •

•

T425 T426 T427

• • • • • • • • • • • • • • • • • • •

Tech Info

170

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps UNC, Forming, Single Coolant Groove

flow characteristics • Through or blind holes • Depths up to approx 1.5 x d1 • TiN for longer tool life

Carbide Drills

Machos ISO UNC, Laminación, Ranura de Refrigeración • Para la conformación en frío de roscas en materiales con buenas características de elongación • Agujeros pasantes o ciegos • Profundidades de hasta aprox 1.5 x d1 • TiN para una mayor vida útil de la herramienta

• For cold forming of threads in materials with good

HSS Drills

Tarauds ISO, UNC, par déformation avec une rainure de lubrification • Taraudage par déformation • Pour trous borgnes et débouchants • Profondeur de taraudage jusqu’à 1.5 x d1 • Revêtement TiN pour une meilleure durée de vie

TPI

Limit

drill ø

40 32 32 24 20 18 16 13

3.15

2.50

GH5

2.9

17.5

3.55

2.80

GH6

3.2

4.50

3.55

GH6

3.8

5.00

4.00

GH6

4.4

6.30

5.00

GH7

5.8

8.00

6.30

GH7

7.3

10.00 8.00

GH7

8.8

9.00

GH8

11.7

7.10

HSSE

Brt

TiN

Single Coolant Groove

Short

Item #

T428 0318 T428 0351 T428 0417 T428 0483 T428 0635 T428 0794 T428 0953 T428 1270

• T429 0351 T429 0417 T429 0483 T429 0635 • • •

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

• • •

• • • • • • • •

T428 T429

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

#5 #6 #8 #10 1/4 5/16 3/8 1/2

T429 D0706

DIN Taps

0318 0351 0417 0483 0635 0794 0953 1270

T428 D0702

Carbide Endmills

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Tool Holding

UNC

ISO Taps

ISO Maschi UNC, Rullare, Scarico Unico • Maschio a rullare per materiali di buona elasticità • Fori ciechi & passanti • Profondità fino a circa 1,5 x d1 • TiN per aumentare vita utensile

• Optimal • Effective

171

Back to index Contents

ISO Taps UNC, Machine Nut, Long Shank

Carbide Drills

Machos ISO UNC, Maquina de Tuercas, Mago Largo • Adecuado para aplicaciones de largo alcance • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes • Profundidades de hasta aprox 2 x d1

• Suited to long reach applications • Suitable for materials up to 1000N/mm² • Through holes • Depths up to approx 2 x d1

Tarauds ISO, UNC Long enfilade • Application générale, grande profondeur • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous débouchants • Profonceur de taraudage jusqu’à 2 x d1

HSS Drills

ISO Maschi UNC, Machine Nut, attacco lungo • Maschio per applicazioni profonde • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a circa 2 x d1

UNC

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Size Ref.

DIN Taps

0635 0794 0953 1270

1/4 5/16 3/8 1/2

Limit

drill ø

20 18 16 13

110

4.5

3.55

GH4

5.1

125

4.5

GH5

6.6

140

5.6

GH5

8.0

180

9.5

7.5

GH6

10.8

HSS Brt

Nut Extra Length Bottoming 2B

Item # T430 0635 T430 0794 T430 0953 T430 1270

Carbide Endmills

TPI

T430 D0702

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

•

• •

T430

• • • •

Tech Info

172

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps UNF, Straight Flute, N

Carbide Drills

Machos ISO UNF, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

TPI

T433

T904

D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

drill ø

Item #

2.80

2.24

2.1

14.5

3.15

2.50

2.35

3.15

2.50

2.65

17.5

3.55

2.80

2.9

4.50

3.55

3.5

5.00

4.00

4.0

5.00

4.00

4.1

5.60

4.50

4.6

6.30

5.00

5.5

8.00

6.30

6.9

10.00 8.00

8.5

8.00

6.30

9.8

9.00

7.10

11.5

T431 0251 T431 0284 T431 0318 T431 0351 T431 0417 T431 0476 T431 0483 T431 0549 T431 0635 T431 0794 T431 0953 T431 1111 T431 1270 T431 1429 T431 1588 T431 1905 T431 2223 T431 2540 T431 2541 T431 2858 T431 3175 T431 3810

T432 0251 T432 0284 T432 0318 T432 0351 T432 0417 T432 0476 T432 0483 T432 0549 T432 0635 T432 0794 T432 0953 T432 1111 T432 1270 T432 1429 T432 1588 T432 1905 T432 2223 T432 2540 T432 2541 T432 2858 T432 3175 T432 3810

T433 0251 T433 0284 T433 0318 T433 0351 T433 0417 T433 0476 T433 0483 T433 0549 T433 0635 T433 0794 T433 0953 T433 1111 T433 1270 T433 1429 T433 1588 T433 1905 T433 2223 T433 2540 T433 2541 T433 2858 T433 3175 T433 3810

• T904 0284 T904 0318 T904 0351 T904 0417 T904 0476 T904 0483 T904 0549 T904 0635 T904 0794 T904 0953 T904 1111 T904 1270 T904 1429 T904 1588 T904 1905 T904 2223 T904 2540 T904 2541 • • •

11.20 9.00

12.8

12.50 10.00

14.5

14.00 11.20

17.5

16.00 12.50

20.5

18.00 14.00

23.5

18.00 14.00

24.0

20.00 16.00

26.5

22.40 18.00

29.5

28.00 22.40

36.0

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T431 T432 T433

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

30 32

DIN Taps

0251 #3 56 45 0284 #4 48 48 0318 #5 44 48 0351 #6 40 50 0417 #8 36 53 0476 3/16 32 (UNS) 58 0483 #10 32 58 0549 #12 28 62 0635 1/4 28 66 0794 5/16 24 72 0953 3/8 24 80 1111 7/16 20 85 1270 1/2 20 89 1429 9/16 18 95 1588 5/8 18 102 1905 3/4 16 112 2223 7/8 14 118 1 12 130 2540 1 14 (UNS) 130 2541 2858 1-1/8 12 138 3175 1-1/4 12 151 3810 1-1/2 12 170

T432 D0702

Carbide Endmills

Size Ref.

T431 D0702

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Tool Holding

UNF

ISO Taps

ISO Maschi UNF, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

173

Back to index Contents

ISO Taps UNF, Straight Flute, N

Carbide Drills

Machos ISO UNF, Ranuras Rectas, N, TiN • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, UNF, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi UNF, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

UNF

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Size Ref.

DIN Taps

TPI

Carbide Endmills HSS Endmills

Limit drill ø

2.80

2.24

GH2

2.1

14.5

3.15

2.50

GH2

2.35

3.15

2.50

GH2

2.65

17.5

3.55

2.80

GH2

2.9

4.50

3.55

GH2

3.5

5.00

4.00

GH3

4.0

5.00

4.00

GH3

4.1

5.60

4.50

GH3

4.6

6.30

5.00

GH3

5.5

8.00

6.30

GH4

6.9

10.00 8.00

GH4

8.5

8.00

6.30

GH5

9.8

9.00

7.10

GH5

11.5

11.20 9.00

GH5

12.8

12.50 10.00

GH5

14.5

14.00 11.20

GH6

17.5

16.00 12.50

GH6

20.5

18.00 14.00

GH7

23.5

18.00 14.00

GH5

24.0

20.00 16.00

GH7

26.5

22.40 18.00

GH7

29.5

28.00 22.40

GH7

36.0

T434

T435

D0706

HSS

TiN

Intermediate

Bottoming

Item #

• • • • • • T434 0483 • T434 0635 T434 0794 T434 0953 T434 1111 T434 1270 • T434 1588 T434 1905 • • • • • •

• • • • • • T435 0483 • T435 0635 T435 0794 T435 0953 T435 1111 T435 1270 • T435 1588 T435 1905 • • • • • •

Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

174

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • •

• •

T434 T435

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps UNF, Straight Flute, N, Left Hand

Carbide Drills

Machos ISO UNF, Ranuras Rectas, N, Izquierda • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, UNF, goujure droite, type N, coupe à gauche • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

0635 0794 0953 1111 1270 1429 1588 1905

T438 D0702

HSS

Brt

Left Hand

Taper

Intermediate

Bottoming

2B LH

TPI

Limit

drill ø

Item #

28 24 24 20 20 18 18 16

6.30

5.00

GH3

5.5

8.00

6.30

GH4

6.9

10.00 8.00

GH4

8.5

8.00

6.30

GH5

9.8

9.00

7.10

GH5

11.5

T436 0635 T436 0794 T436 0953 T436 1111 T436 1270 T436 1429 T436 1588 T436 1905

T437 0635 T437 0794 T437 0953 T437 1111 T437 1270 T437 1429 T437 1588 T437 1905

T438 0635 T438 0794 T438 0953 T438 1111 T438 1270 T438 1429 T438 1588 T438 1905

11.20 9.00

GH5

12.8

102

12.50 10.00

GH5

14.5

112

14.00 11.20

GH6

17.5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T436 T437 T438

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

T437 D0702

DIN Taps

Size Ref.

T436 D0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Tool Holding

UNF

ISO Taps

ISO Maschi UNF, Elica dritta, N, sinistri • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

175

Back to index Contents

ISO Taps UNEF, Straight Flute, N

Carbide Drills

Machos ISO UNFE, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, UNEF, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi UNEF, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

UNEF ISO Taps UNEF Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance Size Ref.

DIN Taps Carbide Endmills

0635 0794 0953 1270 1588 1905 2540

TPI

1/4 5/16 3/8 1/2 5/8 3/4 1

32 32 32 28 24 20 20

HSS

Brt

Extra Fine

Taper

Intermediate

Bottoming

Limit

drill ø

Item #

6.30

5.00

GH3

5.6

8.00

6.30

GH4

7.2

10.00 8.00

GH4

8.8

9.00

7.10

GH5

11.8

102

12.50 10.00

GH5

14.75

112

14.00 11.20

GH6

18.0

130

18.00 14.00

GH7

24.2

T445 0635 T445 0794 T445 0953 T445 1270 T445 1588 T445 1905 T445 2540

T446 0635 T446 0794 T446 0953 T446 1270 T446 1588 T446 1905 T446 2540

T447 0635 T447 0794 T447 0953 T447 1270 T447 1588 T447 1905 T447 2540

5.60

4.50

4.6

•

T489 T489 0533

8.08

6.15

9.5

5.0

•

T490 T490 0655

Stitching Tap

0655

T447 D0702

Tyre Valve Tap (UNS) 5V1

T446 D0702

UNEF Series

0533

T445 D0702

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • •

• • •

• • • • • •

T445 T446 T447

• • • • • • • • • • • •

Tech Info

176

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps UNF, Gun, N

Carbide Drills

Machos ISO UNF, Entrada Corregida • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes • Profundidades de hasta aprox 3 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to approx 3 x d1

HSS Drills

Tarauds ISO, UNF, Gun, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 3 x d1

UNF

ISO Taps

ISO Maschi UNF, Gun, N • Maschio per applicazioni profonde • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a circa 3 x d1

0483 0635 0794 0953 1111 1270 1588 1905 2223 2540

HSSE

Brt N

Blu

TiN

Intermediate

Tool Holding

T441 D0706

TPI

Limit

drill ø

Item #

32 28 24 24 20 20 18 16 14 12

5.00

4.00

GH3

4.1

6.30

5.00

GH3

5.5

8.00

6.30

GH4

6.9

10.00 8.00

GH4

8.5

8.00

6.30

GH5

9.8

9.00

7.10

GH5

11.5

102

12.50 10.00

GH5

12.8

112

14.00 11.20

GH6

17.5

118

16.00 12.50

GH6

20.5

130

18.00 14.00

GH7

23.5

T439 0483 T439 0635 T439 0794 T439 0953 T439 1111 T439 1270 T439 1588 T439 1905 • •

T440 0483 T440 0635 T440 0794 T440 0953 T440 1111 T440 1270 T440 1588 T440 1905 T440 2223 T440 2540

T441 0483 T441 0635 T441 0794 T441 0953 • T441 1270 T441 1588 T441 1905 • •

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• •

• • • •

• • • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • •

T439 T440 T441

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

#10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1

T440 D0702

DIN Taps

Size Ref.

T439 D0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

177

Back to index Contents

ISO Taps UNF, Spiral Flute, N

Carbide Drills

Machos ISO UNF, Helicoidales • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades de hasta aprox 2,5 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to approx 2.5 x d1

HSS Drills

Tarauds ISO, UNF, Hélicoïdal, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 2.5 x d1 ISO Maschi UNF, Tagliente a Elica, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a circa 2,5 x d1

UNF

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Size Ref

DIN Taps

Carbide Endmills

0483 0635 0794 0953 1111 1270 1588 1905

#10 1/4 5/16 3/8 7/16 1/2 5/8 3/4

TPI

Limit

drill ø

32 28 24 24 20 20 18 16

5.00

4.00

GH3

4.1

6.30

5.00

GH3

5.5

8.00

6.30

GH4

6.9

10.00 8.00

GH4

8.5

8.00

6.30

GH5

9.8

9.00

7.10

GH5

11.5

102

12.50 10.00

GH5

12.8

112

14.00 11.20

GH6

17.5

T442

T443

D0702

D0706

HSSE

Brt

TiN

Bottoming

Item #

T442 0483 T442 0635 T442 0794 T442 0953 T442 1111 T442 1270 T442 1588 T442 1905

T443 0483 T443 0635 T443 0794 T443 0953 • T443 1270 T443 1588 T443 1905

HSS Endmills Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

178

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • •

• • • •

• • • • • •

•

T442 T443

• • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps UNF, Forming, Single Coolant Groove

characteristics • Through or blind holes • Depths up to approx 1.5 x d1

HSS Drills

Tarauds ISO, UNF, par déformation avec une rainure de lubrification • Taraudage par déformation • Pour trous borgnes et débouchants • Profondeur de taraudage jusqu’à 1.5 x d1

Carbide Drills

Machos ISO UNF, Laminación, Ranura de Refrigeración • Para la conformación en frío de roscas en materiales con buenas características de elongación • Agujeros pasantes o ciegos • Profundidades de hasta aprox 1.5 x d1 • TiN para una mayor vida útil de la herramienta

• For cold forming of threads in materials with good flow

0635 0794 0953 1270

TPI

Limit

drill ø

28 24 24 20

6.30

5.00

GH7

6.0

8.00

6.30

GH7

7.5

10.00 8.00

GH7

9.0

9.00

GH8

12.1

7.10

HSSE Brt

N Single Coolant Groove Short 2B

Item # T444 0635 T444 0794 T444 0953 T444 1270

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • •

T444

• • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Carbide Endmills

1/4 5/16 3/8 1/2

T444 D0702

DIN Taps

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Nut Tolerance

Tool Holding

UNF

ISO Taps

ISO Maschi UNF, Rullare, Scarico Unico • Maschio a rullare per materiali di buona elasticità • Fori ciechi & passanti • Profondità fino a circa 1,5 x d1

179

Back to index Contents

ISO Taps 8UN, Straight Flute, N

Carbide Drills

Machos ISO UN, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO 8UN, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi 8UN, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance Size Ref.

DIN Taps

UN Carbide Endmills

2858 3175 3493 3810 4128 4445 4763 5080 6033

T448

T449

T450

T910

D0702

HSS

Brt

Extra Fine

Taper

Intermediate

Bottoming

Set

GH8/2B

TPI

drill ø

Item #

8 8 8 8 8 8

138

20.00 16.00

25.5

151

22.40 18.00

28.5

162

25.00 20.00

31.75

170

28.00 22.40

35.0

170

28.00 22.40

38.0

187

31.50 25.00

41.5

187

31.50 25.00

44.5

8 8

200

35.50 28.00

47.5

221

40.00 31.50

57.15

T448 2858 T448 3175 T448 3493 T448 3810 T448 4128 T448 4445 T448 4763 T448 5080 •

T449 2858 T449 3175 T449 3493 T449 3810 T449 4128 T449 4445 T449 4763 T449 5080 •

T450 2858 T450 3175 T450 3493 T450 3810 T450 4128 T450 4445 T450 4763 T450 5080 •

T910 2858 T910 3175 T910 3493 T910 3810 T910 4128 T910 4445 T910 4763 T910 5080 •

1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-3/8

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • •

• • •

• • • • • •

T448 T449 T450

• • • • • • • • • • • •

Tech Info

180

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps BSW, Straight Flute, N

Carbide Drills

Machos ISO BSW, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, BSW, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

TPI

drill ø

2.80

2.24

1.85

3.15

2.50

2.55

4.00

3.15

3.2

5.00

4.00

3.7

5.60

4.50

4.5

6.30

5.00

5.1

8.00

6.30

6.5

10.00 8.00

7.9

8.00

6.30

9.3

9.00

7.10

10.5 12.1

11.20 9.00

12.50 10.00

13.5

14.00 11.20

16.25

16.00 12.50

19.25

18.00 14.00

22.0

20.00 16.00

24.75

22.40 18.00

28.0

28.00 22.40

33.5

31.50 25.00

39.0

35.50 28.00

44.5

T905 D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

Z3 Medium

Item #

T451 0238 T451 0318 T451 0397 T451 0476 T451 0556 T451 0635 T451 0794 T451 0953 T451 1111 T451 1270 T451 1429 T451 1588 T451 1905 T451 2223 T451 2540 T451 2858 T451 3175 T451 3810 T451 4445 T451 5080

T452 0238 T452 0318 T452 0397 T452 0476 T452 0556 T452 0635 T452 0794 T452 0953 T452 1111 T452 1270 T452 1429 T452 1588 T452 1905 T452 2223 T452 2540 T452 2858 T452 3175 T452 3810 T452 4445 T452 5080

T453 0238 T453 0318 T453 0397 T453 0476 T453 0556 T453 0635 T453 0794 T453 0953 T453 1111 T453 1270 T453 1429 T453 1588 T453 1905 T453 2223 T453 2540 T453 2858 T453 3175 T453 3810 T453 4445 T453 5080

T905 0238 T905 0318 T905 0397 T905 0476 T905 0556 T905 0635 T905 0794 T905 0953 T905 1111 T905 1270 T905 1429 T905 1588 T905 1905 T905 2223 T905 2540 • • • • •

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T451 T452 T453

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

3/32 48(WHIT) 45 48 1/8 40 5/32 32(WHIT) 53 58 3/16 24 7/32 24(WHIT) 62 66 1/4 20 72 5/16 18 80 3/8 16 85 7/16 14 89 1/2 12 95 9/16 12 5/8 11 102 3/4 10 112 118 7/8 9 130 1 8 138 1-1/8 7 151 1-1/4 7 170 1-1/2 6 187 1-3/4 5 2 4-1/2 200

T453 D0702

DIN Taps

0238 0318 0397 0476 0556 0635 0794 0953 1111 1270 1429 1588 1905 2223 2540 2858 3175 3810 4445 5080

T452 D0702

Carbide Endmills

Size Ref.

T451 D0702

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

BSW

ISO Taps

ISO Maschi BSW, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

181

Back to index Contents

ISO Taps BSW, Straight Flute, N

Carbide Drills

Machos ISO BSW, Ranuras Rectas, N, TiN • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO BSW, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi BSW, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

BSW

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref.

DIN Taps

Carbide Endmills HSS Endmills

0238 0318 0397 0476 0556 0635 0794 0953 1111 1270 1429 1588 1905 2223 2540 2858 3175 3810 4445 5080

TPI

drill ø

2.80

2.24

1.85

3.15

2.50

2.55

4.00

3.15

3.2

5.00

4.00

3.7

5.60

4.50

4.5

6.30

5.00

5.1

8.00

6.30

6.5

10.00 8.00

7.9

8.00

6.30

9.3

9.00

7.10

10.5

11.20 9.00

12.1

12.50 10.00

13.5

14.00 11.20

16.25

16.00 12.50

19.25

18.00 14.00

22.0

20.00 16.00

24.75

22.40 18.00

28.0

28.00 22.40

33.5

31.50 25.00

39.0

35.50 28.00

44.5

T454

T455

D0706

HSS

TiN

Intermediate

Bottoming

Z3 Medium

Item #

• T454 0318 T454 0397 T454 0476 • T454 0635 T454 0794 T454 0953 T454 1111 T454 1270 • T454 1588 T454 1905 • • • • • • •

• T455 0318 T455 0397 T455 0476 • T455 0635 T455 0794 T455 0953 T455 1111 T455 1270 • T455 1588 T455 1905 • • • • • • •

Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

182

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • •

• •

T454 T455

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps BSW, Straight Flute, N, Left Hand

Carbide Drills

Machos ISO BSW, Ranuras Rectas, N, Izquierda • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, BSW, type N, coupe à gauche • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

TPI

drill ø

20 18 16 14 12 12 11 10

6.30

5.00

5.1

8.00

6.30

6.5

10.00 8.00

7.9

8.00

6.30

9.3

9.00

7.10

10.5 12.1

11.20 9.00

102

12.50 10.00

13.5

112

14.00 11.20

16.25

Brt

N Left Hand Bottoming Z3 LH Medium

Item # T456 0635 T456 0794 T456 0953 T456 1111 T456 1270 T456 1429 T456 1588 T456 1905

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • •

•

• •

• • • •

T456

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

HSS

DIN Taps

0635 0794 0953 1111 1270 1429 1588 1905

T456 D0702

Carbide Endmills

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

BSW

ISO Taps

ISO Maschi BSW, Elica dritta, N, sinistri • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

183

Back to index Contents

ISO Taps BSW, Gun, N

Carbide Drills

Machos ISO BSW, Entrada Corregida • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes • Profundidades de hasta aprox 3 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to approx 3 x d1

HSS Drills

Tarauds ISO, BSW, goujure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous débouchants • Pour taraudage sur machines • Prodondeur de taraudage jusqu’à 3 x d1 ISO Maschi BSW, Gun, N • Maschio per applicazioni profonde • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a circa 3 x d1

BSW

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref.

DIN Taps

Carbide Endmills

0318 0397 0476 0635 0794 0953 1111 1270 1588 1905 2223 2540

drill ø

3.15

2.50

2.55

4.00

3.15

3.2

5.00

4.00

3.7

6.30

5.00

5.1

8.00

6.30

6.5

10.00 8.00

7.9

8.00

6.30

9.3

9.00

7.10

10.5

102

12.50 10.00

13.5

112

14.00 11.20

16.25

118

16.00 12.50

19.25

130

18.00 14.00

22.0

TPI

1/8 40 5/32 32(WHIT) 3/16 24 1/4 20 5/16 18 3/8 16 7/16 14 1/2 12 5/8 11 3/4 10 7/8 9 1 8

T457

T458

T459

D0702

D0706

HSSE

Brt

Blu

TiN

Intermediate

Z3 Medium

Item #

T457 0318 T457 0397 T457 0476 T457 0635 T457 0794 T457 0953 T457 1111 T457 1270 T457 1588 T457 1905 • •

T458 0318 T458 0397 T458 0476 T458 0635 T458 0794 T458 0953 T458 1111 T458 1270 T458 1588 T458 1905 T458 2223 T458 2540

T459 0318 T459 0397 T459 0476 T459 0635 T459 0794 T459 0953 • T459 1270 T459 1588 T459 1905 • •

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• •

• • • •

• • • • • • •

• • • • • • • • •

•

T457 T458 T459

• • • • • • • • • • • • • • • • • • • •

Tech Info

184

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps BSW, Spiral Flute, N

Carbide Drills

Machos ISO BSW, Helicoidales • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades de hasta aprox 2,5 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to approx 2.5 x d1

HSS Drills

Tarauds ISO, BSW, Hélicoïdal, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes • Pour taraudage sur machines • Prodondeur de taraudage jusqu’à 2.5 x d1

BSW

ISO Taps

ISO Maschi BSW, Tagliente a Elica, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a circa 2,5 x d1

0318 0397 0476 0635 0794 0953 1111 1270 1588 1905 2223 2540

drill ø

3.15

2.50

2.55

4.00

3.15

3.2

5.00

4.00

3.7

6.30

5.00

5.1

8.00

6.30

6.5

10.00 8.00

7.9

8.00

6.30

9.3

9.00

7.10

10.5

102

12.50 10.00

13.5

112

14.00 11.20

16.25

118

16.00 12.50

19.25

130

18.00 14.00

22.0

TPI

HSSE

Brt

Blu

TiN

Bottoming

Z3 Medium

Item #

T460 0318 T460 0397 T460 0476 T460 0635 T460 0794 T460 0953 T460 1111 T460 1270 T460 1588 T460 1905 T460 2223 T460 2540

• • • T461 0635 T461 0794 T461 0953 T461 1111 T461 1270 T461 1588 T461 1905 • •

• • T462 0476 T462 0635 T462 0794 T462 0953 • T462 1270 T462 1588 • • •

Tool Holding

T462 D0706

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

•

• • • •

• • • • •

• • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • •

T460 T461 T462

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

1/8 40 5/32 32(WHIT) 3/16 24 1/4 20 5/16 18 3/8 16 7/16 14 1/2 12 5/8 11 3/4 10 7/8 9 1 8

T461 D0702

DIN Taps

Size Ref.

T460 D0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

185

Back to index Contents

ISO Taps BSW, Forming, Single Coolant Groove

Carbide Drills

Machos ISO BSW, Laminación, Ranura de Refrigeración • Para la conformación en frío de roscas en materiales con buenas características de elongación • Agujeros pasantes o ciegos • Profundidades de hasta aprox 1.5 x d1 • TiN para una mayor vida útil de la herramienta

• For cold forming of threads in materials with good flow

characteristics • Through or blind holes • Depths up to approx 1.5 x d1 • TiN for longer tool life

HSS Drills

Tarauds ISO, BSW, par déformation avec une rainure de lubrification • Taraudage par déformation • Pour trous borgnes et débouchants • Profondeur de taraudage jusqu’à 1.5 x d1 • Revêtement TiN pour une meilleure durée de vie ISO Maschi BSW, Rullare, Scarico Unico • Maschio a rullare per materiali di buona elasticità • Fori ciechi & passanti • Profondità fino a circa 1,5 x d1 • TiN per aumentare vita utensile

BSW

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref.

DIN Taps

0318 0397 0476 0635 0794 0953

TPI

1/8 40 5 /32 32(WHIT) 3/16 24 1/4 20 5/16 18 3/8 16

drill ø

3.15

2.50

2.9

4.00

3.15

3.6

5.00

4.00

4.3

6.30

5.00

5.8

8.00

6.30

7.3

10.00 8.00

8.8

T463

T464

D0702

D0706

HSSE

Brt

TiN

Single Coolant Groove

Short

Z3 Medium

Item #

T463 0318 T463 0397 T463 0476 T463 0635 T463 0794 T463 0953

• T464 0397 T464 0476 • • •

Carbide Endmills HSS Endmills Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

186

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

•

• • •

T463 T464

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps BSW, Machine Nut, Long Shank

Carbide Drills

Machos ISO BSW, Maquina de Tuercas, Mago Largo • Adecuado para aplicaciones de largo alcance • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes • Profundidades de hasta aprox 2 x d1

• Suited to long reach applications • Suitable for materials up to 1000N/mm² • Through holes • Depths up to approx 2 x d1

HSS Drills

Tarauds ISO, BSW, long enfilade • Application générale, grande profondeur • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous débouchants • Pour taraudage sur machines • Prodondeur de taraudage jusqu’à 2 x d1

TPI

drill ø

20 18 16 12 11 10 8

110

4.5

3.55

5.1

125

4.5

6.5

140

5.6

7.9

180

9.5

7.5

10.5

200

12.5

10.0

13.5

250

11.2

16.25

280

14.0

22.0

Brt

Nut Bottoming Z3 Medium

Item # T465 0635 T465 0794 T465 0953 T465 1270 T465 1588 T465 1905 T465 2540

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

•

• • • •

T465

• •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

1/4 5/16 3/8 1/2 5/8 3/4 1

HSS

DIN Taps

0635 0794 0953 1270 1588 1905 2540

T465 D0702

Carbide Endmills

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

BSW

ISO Taps

ISO Maschi BSW, Machine Nut, attacco lungo • Maschio per applicazioni profonde • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a circa 3 x d1

187

Back to index Contents

ISO Taps BSF, BSB & BA, Straight Flute, N

Carbide Drills

Machos ISO BSF, BSB, BA, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, BSF,BSB & BA, goure droite, type N • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi BSF, BSB & BA, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

ISO Taps

BSF, BSB, BA BSF, BSB, BA

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance l1

drill ø

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

32 26 22 20 18 16 16 14 12 11 10

5.00

4.00

4.0

6.30

5.00

5.3

8.00

6.30

6.8

10.00 8.00

8.3

8.00

6.30

9.8

9.00

7.10

11.0

11.20 9.00

12.7

12.50 10.00

14.0

112

14.00 11.20

16.75

118

16.00 12.50

19.75

130

18.00 14.00

22.75

6.30

5.00

5.2

8.00

6.30

6.8

10.00 8.00

8.4

8.00

6.30

10.0

9.00

7.10

11.6

11.20 9.00

13.2

12.50 10.00

14.8

14.00 11.20

18.0

16.00 12.50

20.8

18.00 14.00

24.3

BSF BSB

M 8

HSS

Brt

Taper

Intermediate

Bottoming

Set

Z3 Medium

Item #

T466 0476 T466 0635 T466 0794 T466 0953 T466 1111 T466 1270 T466 1429 T466 1588 T466 1905 T466 2223 T466 2540

T467 0476 T467 0635 T467 0794 T467 0953 T467 1111 T467 1270 T467 1429 T467 1588 T467 1905 T467 2223 T467 2540

T468 0476 T468 0635 T468 0794 T468 0953 T468 1111 T468 1270 T468 1429 T468 1588 T468 1905 T468 2223 T468 2540

T906 0476 T906 0635 T906 0794 T906 0953 T906 1111 T906 1270 • • • • •

T472 T466 0635 T472 0794 T472 0953 T472 1111 T472 1270 • • • • •

T473 T467 0635 T473 0794 T473 0953 T473 1111 T473 1270 • • • • •

T474 T468 0635 T474 0794 T474 0953 T474 1111 T474 1270 T474 1429 T474 1588 T474 1905 T474 2223 T474 2540

T908 T906 0635 T908 0794 T908 0953 T908 1111 T908 1270 • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

188

T906 D0702

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * Limit & Nut Tolerance = Z4

• •

Tech Info

ISO VDI 3323

T468 D0702

• •

BSB 0635 1/4 26(BSF) 66 0794 5/16* 26 72 0953 3/8* 26 80 1111 7/16* 26 85 1270 1/2* 26 89 1429 9/16* 26 95 1588 5/8* 26 102 1905 3/4* 26 112 2223 7/8* 26 118 1* 26 130 2540

T467 D0702

• • • • • • • •

Reamers

• •

HSS Endmills

95 102

• •

0476 0635 0794 0953 1111 1270 1429 1588 1905 2223 2540

• • • •

Carbide Endmills

TPI

• • • • • • • •

DIN Taps

BSF

• •

Size Ref.

T466 D0702

• Optimal • Effective

Contents

Back to index

ISO Taps BSF, BSB & BA, Straight Flute, N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

TPI

drill ø

0 1 2 3 4 5 6 7 8 9 10

1 0.9 0.81 0.73 0.66 0.59 0.53 0.48 0.43 0.39 0.35

6.30

5.00

5.1

5.60

4.50

4.5

5.00

4.00

4.0

4.50

3.55

3.4

3.55

2.80

3.0

3.15

2.50

2.65

3.15

2.50

2.3

2.80

2.24

2.05

2.80

2.24

1.8

2.50

2.00

1.55

2.50

2.00

1.4

T471

T907

D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

Z3 Medium

Item #

T469 0600 T469 0530 T469 0470 T469 0410 T469 0360 T469 0320 T469 0280 T469 0250 T469 0220 T469 0190 T469 0170

T470 0600 T470 0530 T470 0470 T470 0410 T470 0360 T470 0320 T470 0280 T470 0250 T470 0220 T470 0190 T470 0170

T471 0600 T471 0530 T471 0470 T471 0410 T471 0360 T471 0320 T471 0280 T471 0250 T471 0220 T471 0190 T471 0170

• T907 0530 T907 0470 T907 0410 T907 0360 T907 0320 T907 0280 T907 0250 T907 0220 T907 0190 T907 0170

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * Limit & Nut Tolerance = Z4

• • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T469 T470 T471

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0600 0530 0470 0410 0360 0320 0280 0250 0220 0190 0170

T470 D0702

DIN Taps

Size Ref.

T469 D0702

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

BSF, BSB, BA

ISO Maschi BSF, BSB & BA, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

189

Back to index Contents

ISO Taps Pipe, G (BSPF), Straight Flute

Carbide Drills

Machos ISO G (BSPF), Ranuras Rectas • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, PIPE, G (BSPF 55°), goujure droite • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi Pipe, G (BSPF), Elica dritta • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

GISO (BSPF) Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit Size Ref.

DIN Taps

T480

T481

T909

D0702

HSS

Brt

Taper

Intermediate

Bottoming

Set

Carbide Endmills

drill ø

Item #

8.0

6.3

8.8

10.0

8.0

11.8

12.5

10.0

15.3

16.0

12.5

19.0

18.0

14.0

21.0

20.0

16.0

24.5

102

22.4

18.0

28.5

109

25.0

20.0

31.0

119

31.5

25.0

39.5

125

35.5

28.0

45.5

132

35.5

28.0

51.5

140

40.0

31.5

57.5

T479 0973 T479 1316 T479 1666 T479 2096 T479 2291 T479 2644 T479 3020 T479 3325 T479 4191 T479 4780 T479 5375 T479 5961

T480 0973 T480 1316 T480 1666 T480 2096 T480 2291 T480 2644 T480 3020 T480 3325 T480 4191 T480 4780 T480 5375 T480 5961

T481 0973 T481 1316 T481 1666 T481 2096 T481 2291 T481 2644 T481 3020 T481 3325 T481 4191 T481 4780 T481 5375 T481 5961

T909 0973 T909 1316 T909 1666 T909 2096 T909 2291 T909 2644 • T909 3325 • • • •

TPI

0973 1/8 28 1316 1/4 19 1666 3/8 19 2096 1/2 14 2291 5/8 14 2644 3/4 14 3020 7/8 14 1 11 3325 4191 1-1/4 11 4780 1-1/2 11 5375 1-3/4 11 2 11 5961

T479 D0702

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • •

• • • • • • • • • • • •

• • • • • • •

•

• • • •

• • • • •

T479 T480 T481

• • • • • • • • • • • •

Tech Info

190

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps Pipe, G (BSPF), Gun & Spiral Flute

HSS Drills

Tarauds ISO, PIPE, G (BSPF 55°), Gun & Hélicoïdal • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1

Carbide Drills

Machos ISO G (BSPF), helicoidal y entrada corregida. • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Depths up to approx 1 x d1

0973 1316 1666 2096 2644

drill ø

8.8

11.2

11.8

112

11.2

15.3

118

12.5

19.0

135

24.5

TPI 28 19 19 14 14

T485 D0702

HSS

Brt

Intermediate

Bottoming

Item #

T484 0973 T484 1316 T484 1666 T484 2096 T484 2644

T485 0973 T485 1316 T485 1666 T485 2096 T485 2644

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• •

• • • • •

• • • • • • • •

• • • • •

• • • •

• • • • • • • •

T484 T485

• • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

Carbide Endmills

1/8 1/4 3/8 1/2 3/4

T484 D0702

DIN Taps

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit

Tool Holding

GISO (BSPF) Taps

ISO Maschi Pipe, G (BSPF), Gun & Tagliente a Elica • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Profondità fino a circa 1 x d1

• Optimal • Effective

191

Back to index Contents

ISO Taps Pipe, G (BSPF), Straight Flute

Carbide Drills

Machos ISO G (BSPF), Ranuras Rectas, TiN • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx 1 x d1

HSS Drills

Tarauds ISO, PIPE, G (BSPF 55°), gougure droite, TiN • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 ISO Maschi Pipe, G (BSPF), Elica dritta • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

GISO (BSPF) Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit

Size Ref.

DIN Taps

Carbide Endmills

drill ø

8.0

6.3

8.8

10.0

8.0

11.8

12.5

10.0

15.3

16.0

12.5

19.0

18.0

14.0

21.0

20.0

16.0

24.5

102

22.4

18.0

28.5

109

25.0

20.0

31.0

119

31.5

25.0

39.5

125

35.5

28.0

45.5

132

35.5

28.0

51.5

140

40.0

31.5

57.5

TPI

0973 1/8 28 1316 1/4 19 1666 3/8 19 2096 1/2 14 2291 5/8 14 2644 3/4 14 3020 7/8 14 1 11 3325 4191 1-1/4 11 4780 1-1/2 11 5375 1-3/4 11 2 11 5961

T482

T483

D0706

HSS

TiN

Intermediate

Bottoming

Item #

T482 0973 T482 1316 T482 1666 T482 2096 • • • • • • • •

T483 0973 T483 1316 T483 1666 T483 2096 T483 2291 T483 2644 • • • • • •

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

192

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • •

• •

T482 T483

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps Pipe, Rc (BSPT), Straight Flute

Rc (BSPT) thread forms

Carbide Drills

Machos ISO Rc (BSPT), Ranuras Rectas • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Suitable for both hand and machine operations • Taper pipe reamer recommended prior to tapping

HSS Drills

Tarauds ISO, PIPE, Rc (BSPT conique 55°), goujure droite • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Prodondeur de taraudage jusqu’à 1 x d1 • Alésoir pré-taraudage recommandé

TPI

HSS

Brt

TiN

Bottoming

To Suit

Reamer Size

Item #

8.4

10.8

14.5

18.0

16.0

23.0

25.0

20.0

29.0

31.5

25.0

38.0

35.5

28.0

44.0

40.0

31.5

55.0

R108 0803 R108 1031 R108 1372 R108 1689 R108 2225 R108 2802 R108 3668 R108 4277 R108 5484

T475 0973 T475 1316 T475 1666 T475 2096 T475 2644 T475 3325 T475 4191 T475 4780 T475 5961

T476 0973 T476 1316 T476 1666 T476 2096 • • • • •

8.0

10.0

6.3

8.0

75 87

12.5

10.0

16.0

12.5

20.0

109

119

125 140

Tool Holding

T476 D0706

drill ø

Rc (BSPT) 1:16 Taper Rate

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. *Refer Page # 196 for Tapered Reamer

• • • • •

• • • • • • • •

• •

•

• • • • • • • • • • • • • •

T475 T476

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0973 1/8 28 1316 1/4 19 1666 3/8 19 2096 1/2 14 2644 3/4 14 1 11 3325 4191 1-1/4 11 4780 1-1/2 11 2 11 5961

T475 D0702

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Carbide Endmills

Size Ref.

RcISO(BSPT) Taps

ISO Maschi Pipe, Rc (BSPT), Elica dritta • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

• Optimal • Effective

193

Back to index Contents

ISO Taps Pipe, Rp & Pg Series, Straight Flute

Carbide Drills

• General purpose use for materials up to approx 1000 N/mm² • Through & blind holes • Suitable for both hand and machine operations

HSS Drills

ISO Maschi Pipe, Rp & Pg Series, Elica dritta • Maschio universale ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano

Tarauds ISO, PIPE, Rp & Pg, goujure droite • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main

Rp Pg ISO Taps

Machos ISO Rp y Pg series, Ranuras Rectas • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref.

DIN Taps

TPI

Carbide Endmills

0973 1/8 28 1316 1/4 19 1666 3/8 19 2096 1/2 14 2644 3/4 14 1 11 3325 4191 1-1/4 11 4780 1-1/2 11 2 11 5961

8.0

10.0

75 87

109

HSS Endmills

1250 1520 1860 2040 2250 2830

6.3

8.6

8.0

11.5

12.5

10.0

15.0

16.0

12.5

18.5

20.0

16.0

24.0

25.0

20.0

30.2

119

31.5

25.0

39.0

125

35.5

28.0

45.0

140

40.0

31.5

56.4

7.1

11.3

12.5

Pg – Steel Conduit (Armour Pipe) 20 18 18 18 18 16

102

12.5

13.9

15.2

112

11.2

17.3

18.6

118

12.5

19.1

20.4

118

12.5

21.2

22.5

138

26.8

28.3

HSS Brt

N Bottoming To Suit

Item # T477 0973 T477 1316 T477 1666 T477 2096 T477 2644 T477 3325 T477 4191 T477 4780 T477 5961 T478 T478 1250 T478 1520 T478 1860 T478 2040 T478 2250 T478 2830

Reamers

Pg 7 Pg 9 Pg 11 Pg 13.5 Pg 16 Pg 21

drill ø Nominal OD

Rp Series (BSPPL) Sealing Pipe Thread Parallel

T477 D0702

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

194

S Titanium & Super Alloys H Hard Materials

• •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• •

• • • • • • • •

• •

• • • •

T477 T478

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

ISO Taps Pipe, National Series

Carbide Drills

• General purpose use for materials up to approx 1000 N/mm² • Suitable for both hand and machine operations • Taper pipe reamer recommended prior to tapping

HSS Drills

Tarauds ISO, PIPE, NPSF, NPT, NPTF, goujure droite • Application générale • Adapatés aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Pour taraudage sur machines et taraudage à main • Alésoir pré-taraudage recommandé ISO Maschi Pipe, Serie nazionale • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Adatto per operazione a macchina e a mano • Profondità fino a circa 1 x d1

1/8 1/4 3/8 1/2

27 18 18 14

1029 1372 1715 2134

Limit drill ø

11.11 8.33

9.5

GH3

8.6

14.29 10.70 11.1

GH4

11.3

17.78 13.49 12.7

GH4

14.5

17.46 13.08 15.9

GH5

18.0

8.2

10.8

14.0

17.5

23.0

65 79

NPT (National Pipe Taper) 15° Chamfer (1:16 Taper Rate) 11.11 8.33 9.5 4 1029 1/8 27 54 19 14.29 10.70 11.1 4 1372 1/4 18 62 27 17.78 13.49 12.7 4 1715 3/8 18 65 27 17.46 13.08 15.9 4 2134 1/2 14 79 35 23.00 17.25 17.5 4 2667 3/4 14 82 35 28.60 21.40 20.6 5 1 11-1/2 95 44.5 3340 4216 1-1/4 11-1/2 102 44.5 - 33.30 25.00 23.8 5

28.5

37.0

NPTF (Dryseal Taper) 15° Chamfer (1:16 Taper Rate)

1029 1372 1715 2134

1/8 1/4 3/8 1/2

11.11 8.33

9.5

8.2

14.29 10.70 11.1

10.8

17.78 13.49 12.7

14.0

17.46 13.08 15.9

17.50

Bottoming Refer Limit

Item # T486 1029 T486 1372 T486 1715 T486 2134

R108 0803 R108 1031 R108 1372 R108 1689 R108 2225 R108 2802 R108 3668

T487 T487 1029 T487 1372 T487 1715 T487 2134 T487 2667 T487 3340 T487 4216

R108 0803 R108 1031 R108 1372 R108 1689

T488 T488 1029 T488 1372 T488 1715 T488 2134

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals *Refer Page # 196 for Tapered Reamer

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • • • • • • • •

• • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T486 T487 T488

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

27 18 18 14

Reamer Size

Tool Holding

NPT

HSS Colour Temp

DIN Taps

TPI

T486 D0702

Carbide Endmills

NPSF (Dryseal Straight)

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

HSS Endmills

Size Ref.

ISO Taps

Machos ISO Series Nacionales • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Adecuado para operaciones manuales y en máquina • Profundidades de hasta aprox 1 x d1

195

Back to index Contents

Reamers Taper Pipe (1:16)

Carbide Drills

• Used prior to tapping • For Rc (BSPT), NPT & NPTF tapered threads • Prolongs tap life, especially in tough materials

Alésoir conique 1:16 avant traudage • Utilisation avant taraudage • Pour taraudages coniques Rc (BSPT), NPT & NPTF • Prolonge la durée de vie du taraud

HSS Drills

Reamers Taper Pipe (1:16) • Preparatore al foro conico pre filettatura • Per filettature coniche Rc (BSPT), NPT & NPTF • Aumenta la durata del maschio, specialmente su materiali difficili Escariador cónico (1:16) • Utilizar antes de roscar • Para roscas cónicas Rc (BSPT), NPT y NPTF • Prolonga la vida útil del macho, especialmente en materiales resistentes

NPT

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Size Ref. Size

DIN Taps Carbide Endmills

0803 1/8 1031 1/4 1372 3/8 1689 1/2 2225 3/4 1 2802 3668 1-1/4 4277 1-1/2 2 5484

R108 B0302 HSS Brt

N Bottoming Refer Limit

Item #

0.316 0.406 0.540 0.665 0.876 1.103 1.444 1.684 2.159

2-11/32

19/32

0.353

0.315

2-21/32

25/32

0.453

0.394

2-31/32

7/8

0.592

0.492

3-7/16

1-1/32

0.729

0.630

R108 0803 R108 1031 R108 1372 R108 1689 R108 2225 R108 2802 R108 3668 R108 4277 R108 5484

1-1/8

0.945

0.787

1-5/16

1.184

0.984

4-11/16

1-7/16

1.529

1.240

4-15/16

1-15/32

1.775

1.398

5-17/32

1-5/8

2.260

1.575

HSS Endmills

3-25/32 4-5/16

Reamers 6

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • •

• • • • • • • • • • • • •

•

R108

• • • • • • • •

Tech Info

196

ISO VDI 3323

• Optimal • Effective

TOOL HOLDING

• For improved thread quality • CNC rigid tapping • Extended tool life of taps

Synchro Tapping Attachment with unique Double Flexure Unlike other “synchronous” tap drivers that use soft plastic components or belleville washers similar as above, to cushion the taps’ entry into the hole, Synchro utilizes a (computer generated, precisely machined, special steel alloy) Double Flexure between the mount and the chuck. It compensates both axially for the unavoidable discrepancies between the machine’s programmed RPM, feed and traverse and the exact thread pitch and precise hole location. The Synchro is dependable and predictable. You can expect long life performance under all working conditions. What’s more, you’ll make significant savings when it comes to tap costs.

Synchro Proven Results

Independent tests in real world applications confirm Synchro is unmatched in performance Consistent and Force (N)

• Tap life increased by 100% or more • Thread quality improved • Increased production due to less tap breakage • Less down time • Reduced costs. The most economical rigid tapping Synchro exerts lower thrust and torque forces than any other tap holder on the market. In any given material the lower the thrust and torque forces on the tap, the longer the tap life.

600

Steel Collet Holder Competitor X Competitor Y Sutton Synchro SFT50

500

Thrust (N)

400 300

200

SFT100

SFT75

187 160 133 106 80 54 27 .125

.25

predictable tap starting force

Deflection Rates Only Synchro’s computer SFT50 generated flexure technology produces a progressively higher tap starting force SFT10 for each 0.025mm of deflection. It’s predictable and consistent throughout .375 .50 .625 the life of the tool. Deflection (mm)

Test One (Thrust): 10 holes, M6 R45Al, 2 flute tap, 3x Dia. deep in AL7075 at 1000 RPM

Holder Type

Average Thrust (N)

Steel Collet Holder (Rigid) Competitor X Competitor Y Synchro

1008 681 320 -12

Average Down Cut Average Reverse Thrust (N) Thrust (N) Entering Hole Exiting Hole

1379 879 425 -29

930 445 266 -31

Test Two (Torque): 10 holes, M6 R45Al, 2 flute tap, 3x Dia. deep in AL7075 at 2000 RPM

200

Holder Type

Average Torque (Ncm)

Average Down Cut Torque (Ncm) Entering Hole

Average Reverse Torque (Ncm) Exiting Hole

Steel Collet Holder (Rigid) Competitor X Competitor Y Synchro

481 593 542 268

631 639 730 371

-387 -354 -392 -190

100 0 Sutton Synchro SFT50

-100 Depth

Graph illustrates the final hole tapped by each tap driver.

Contents

Tool Holding CNC – Rigid Tapping

Carbide Drills

• For the best rigid tapping results • Holder designed for machines with rigid tapping • Machine reversal required • Increases tap life by 100% or more • Improve thread quality • Flexure design, acts like shock absorber

Appareil à tarauder CNC, pour taraudage rigide

HSS Drills

• Pour de meilleurs résultats en taraudage • Adapté pour le taraudage rigide sur machine CNC • Machines à inversion recommandées • Jusqu'à 100% de durée de vie supplémentaire • Meilleure qualité de taraudage • Absobeur de chocs

Maschiatore CNC – Maschiatura rigida

ISO Taps

• Per la miglior soluzione di maschiatura rigida • Utensile progettato per macchine predisposte alla maschiatura rigida • Invertitore richiesto • Può aumentare la vita utensile del 100% e oltre • Migliora la qualità del filetto • Progettato per essere flessibile e assorbire eventuali stop improvvisi

Roscador CNC - Roscado Rígido

Tool Holding

• Para los mejores resultados en roscado rígido • Soporte diseñado para máquinas con roscado rígido • Se requiere inversión en la máquina. • Aumenta la vida útil del macho en un 100% o más • Mejora la calidad de rosca • Diseño flexible, actúa como corrector

Ref Code

ER11

43102511

ER20

43502520

ER25

43752525

ER40

431002540

ER11 ER11 ER11 ER11 ER11 ER11 ER11 ER11 ER20 ER20 ER20 ER20 ER20 ER20 ER20 ER25 ER25 ER25 ER25 ER25 ER25 ER25 ER25

Item # Z101 Z101 SFT10 Z101 SFT50 Z101 SFT75 Z101 SFT100 Z110 Z110 0025 Z110 0030 Z110 0035 Z110 0040 Z110 0045 Z110 0050 Z110 0055 Z110 0060 Z111 Z111 0045 Z111 0050 Z111 0060 Z111 0070 Z111 0080 Z111 0090 Z111 0100 Z112 Z112 0045 Z112 0060 Z112 0070 Z112 0080 Z112 0090 Z112 0100 Z112 0110 Z112 0120

DIN Taps

M1-M6 #2-#10 25mm SS SFT10 Synchro SFT10 M4-M12 #8-1/2 25mm SS SFT50 Synchro SFT50 M4-M16 3/8 - 3/4 25mm SS SFT75 Synchro SFT75 25mm SS SFT100 Synchro SFT100 M8-M30 Collets - SFT10 (Round Drive) (Discount Group Z1110) M1-1.8 0025 2-2.5mm M2-2.6 0030 2.5-3mm M3 0035 3-3.5mm M3.5 0040 3.5-4mm M4 0045 4-4.5mm M4 JIS 0050 4.5-5mm M5 JIS 0055 5-5.5mm M5/M6 / M2-M6 Synchro 0060 5.5-6mm Collets - SFT50 (Square Drive) (Discount Group Z1110) M4 DIN371 0045 Ø 4.5mm ISO 0050 Ø 5mm M5/M6 DIN371 / M2-M6 Synchro 0060 Ø 6mm M10 DIN376 0070 Ø 7mm M8 DIN371 / M8 Synchro 0080 Ø 8mm M12 DIN376 0090 Ø 9mm M10 DIN371 / M10 Synchro 0100 Ø 10mm Collets - SFT75 (Square Drive) (Discount Group Z1110) M4 DIN371 0045 Ø 4.5mm M5/M6 DIN371 / M2-M6 Synchro 0060 Ø 6mm M10 DIN371 0070 Ø 7mm M8 DIN371 / M8 Synchro 0080 Ø 8mm M12 DIN376 0090 Ø 9mm M10 DIN371 / M10 Synchro 0100 Ø 10mm M14 DIN376 0110 Ø 11mm M16 DIN376 / M12 Synchro 0120 Ø 12mm

Collet Series

Carbide Endmills

Mount

Collet SFT100

HSS Endmills

Size Capacity

Tapping Attachments (Discount Group Z1104)

Collet SFT50

Reamers

Size Ref. Description

Patented Flexure Design

Tech Info

ER25 Collet (Sq. Drive)

199

Contents

Tool Holding CNC – Rigid Tapping

Carbide Drills

Appareil à tarauder CNC, pour taraudage rigide

HSS Drills

Maschiatore CNC – Maschiatura rigida

ISO Taps

Roscador CNC - Roscado Rígido

Tool Holding BT-40 Arbor

Size Ref. Description

DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

200

0080 0100 0120 0140 0160

Size Capacity

Mount

Collets - SFT100 (Square Drive) (Discount Group Z1110) Ø 8mm Ø 10mm Ø 12mm Ø 14mm Ø 16mm

Ref Code

ER40

M10 DIN371 / M10 Synchro

ER40

M16 DIN376 / M12 Synchro

ER40

M18 DIN376 / M14 Synchro

ER40

M20 DIN376 / M16 Synchro

ER40

23943

23945

Item # Z113 Z113 0080 Z113 0100 Z113 0120 Z113 0140 Z113 0160

M8 DIN371 / M8 Synchro

Accessories (Discount Group Z1108) 3943 BT-40 Arbor W/25mm Bore 3945 BT-50 Arbor W/25mm Bore BT40 Pull stud BT40 BT50 Pull stud BT50

Collet Series

ER25 Collet (Sq. Drive)

Z130 Z130 3943 Z130 3945 Z135 Z135 BT40 Z135 BT50

DIN TAPS

• M, MF, MJ • UNC, UNF, UN, UNJ • G (BSPF) • Rc (BSPT) • NPT

Contents

DIN Tap Finder

Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

Sutton N VA GG AI W Ti Ni H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

Page

209

210

211

212

213

HSS Drills

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

For Synchro Tapping Catalogue Code M MF Material Surface Finish Sutton Designation Tapping Depth Limit & Nut Tolerance

ISO Taps ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers

Tech Info

VDI^ 3323

Material

Condition

~ 0.15 %C A 125 1 Steel - Non-alloy, cast & free cutting ~ 0.45 %C A 190 2 QT 250 3 ~ 0.75 %C A 270 4 QT 300 5 A 180 6 Steel - Low alloy & cast < 5% of alloying elements QT 275 7 QT 300 8 QT 350 9 A 200 10 Steel - High alloy, cast & tool HT 325 11 Ferritic / Martensitic A 200 12 Steel - Corrosion resistant & cast Martensitic QT 240 13 Austenitic AH 180 14.1 Stainless Steel Duplex 250 14.2 Precipitation Hardening 250 14.3 Ferritic / Pearlitic 180 15 Cast Iron - Grey (GG) Pearlitic 260 16 Ferritic 160 17 Cast Iron - Nodular (GGG) Pearlitic 250 18 Ferritic 130 19 Cast Iron - Malleable Pearlitic 230 20 60 21 Aluminum & Magnesium Non Heat Treatable - wrought alloy Heat Treatable AH 100 22 75 23 Aluminum & Magnesium Non Heat Treatable - cast alloy ≤12% Si Heat Treatable AH 90 24 130 25 Al & Mg - cast alloy >12% Si Non Heat Treatable Free cutting, Pb > 1% 110 26 Copper & Cu alloys (Brass/Bronze) Brass (CuZn, CuSnZn) 90 27 Bronze (CuSn) 100 28 29 Non-metallic - Thermosetting & fiber-reinforced plastics 30 Non-metallic - Hard rubber, wood etc. Fe based A 200 31 High temp. alloys AH 280 32 Ni / Co based A 250 33 AH 350 34 C 320 35 CP Titanium 400 MPa 36 Titanium & Ti alloys Alpha alloys 860 MPa 37.1 Alpha / Beta A 960 MPa 37.2 alloys AH 1170 MPa 37.3 Beta alloys A 830 MPa 37.4 AH 1400 MPa 37.5 HT 45 HRC 38.1 Hardened steel HT 55 HRC 38.2 HT 58 HRC 39.1 HT 62 HRC 39.2 Chilled C 400 40 Cast Iron HT 55 HRC 41

T377 T379 T766 T768 PM-HSSE V3 TiCN UNI 2xØ 6HX

• Optimal • Effective

T373 T375 T762 T764 PM-HSSE V3 TiCN UNI 2xØ 6HX

T365 T367 T754 T756 PM-HSSE V3 TiCN UNI 2xØ 6HX

T369 T371 T758 T760 PM-HSSE V3 CrN AI 2xØ 6HX

T381 T383 T770 T772 PM-HSSE V3 TiN UNI 2xØ 6HX

N/mm2

• • • • • • • •

• • • •

• •

•

• • • • • • • • • • • • • • • • • • •

• •

360

• • • • • • • • • • • • • • • • • • •

680

•

• •

•

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 610 880 570 840 460 780 210 360 270 320 460 390 320

950 840 1180 1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

202

210

• • • •

• • •

•

Contents Carbide Drills ISO Taps

N/mm2 440 640 840 910 1010 610 930 1010 1180 680 1100

• • • • • • • •

•

680 810 610

• •

•

840 840 610 880 570 840 460 780 210 360 270 320 460 390 320 360

• • • •

• • •

• • • • • •

•

• • • • • •

•

• • •

•

• •

•

• • • • • •

680 950

• • • • • • • •

•

• • • • • •

•

• • • • • •

• • •

Tool Holding

Condition

DIN Taps

Material

Carbide Endmills

3323

Catalogue Code M T286 / T287 T288 / T289 T290 / T291 T292 / T293 T670 / T671 T741 / T742 T335 / T336 T357 / T358 T294 T296 MF T298 T299 T300 T301 T743 T744 T668 T669 T343 T345 T302 T303 UNC UNF G (BSPF) T304 T305 T306 T307 T308 T808 NPT HSSE HSSE VHM PM-HSS Co SPM VHM HSSE Material TiN Ni+Blu TiCN TiCN TiCN TiCN TiCN Brt TiCN Surface Finish Brt N GG GGG DC XH VH UNI Sutton Designation ≤ 1.5xØ ≤ 3xØ ≤ 3xØ ≤ 1.5xØ ≤ 1.5xØ ≤ 1.5xØ Tapping Depth ISO 2 / 6H 6HX 6H 6HX 6HX 6HX ANSI B1.20.1 Limit & Nut Tolerance

HSS Endmills

VDI^

341 342

840 1180 1080

Reamers

ISO

329 330 330

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

•

Tech Info

For Tapping Through & Blind Holes

214 216 216 217 217 218 218 219 220 272 273 273 274 274 275 275 276 277 296 296

HSS Drills

Page M 214 MF 272 UNC UNF G (BSPF) 329 BSPT/NPT

• Optimal • Effective 203

Contents

DIN Tap Finder

Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

221 278 297 320 331

223 278 297 320

223

225

226 280 298 321 332

228

Sutton N VA GG AI W Ti Ni H

HSS Drills

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

For Tapping Through Holes

ISO Taps ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers

Tech Info

VDI^ 3323

Material

Catalogue Code M T100 / T101 T102 / T103 T104 / T105 T106 / T107 T648 / T649 T337 / T338 T687 / T688 T122 / T123 T124 / T125 T126 / T127 T156 T157 T155 T689 MF T154 T166 T167 T165 T693 UNC T164 T702 T175 T174 T694 UNF T173 T179 T180 T700 G (BSPF) T178 HSSE HSSE HSSE HSSE PM-HSSE V3 HSSE HSSE Material Brt Blu TiN Brt Brt Brt Hardlube Ni Blu CrN Surface Finish N N N - LH N - Long UNI W Cu Sutton Designation ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ Tapping Depth ISO 2 / 6H ISO 3 / 6G ISO 2 / 6H ISO 2 / 6H 6HX ISO 2 / 6H ISO 2 / 6H Limit & Nut Tolerance Condition

N/mm2 440 640 840 910 1010 610 930 1010

• • • •

• • • • • • • •

• • • •

• •

•

• • • •

•

• • • • • •

• •

• • • • • • • • • • • • •

• • • •

• • • • •

1180 680 1100 680 810 610 840 840 610 880 570 840 460 780 210 360 270 320 460 390 320 360

• •

680 950 840 1180 1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

204

221 278 297 320 331

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

Page M MF UNC UNF G (BSPF)

• Optimal • Effective

• •

• • • • •

•

• • • • • •

• •

• • • • • • • • • • • • • •

• • •

• • • • • • • •

Contents Carbide Drills

231 231 233 233 233 233 235 235 237 237 237 239 239 239 263 264 281 282 282 283 283 284 263 264 299 300 301 301 303 303 318 319 322 323 318 319 333 334 334

HSS Drills

230 230 231 281 299 322 333

T128 / T129 T130 / T131 T110 / T111 T112 / T113 T359 / T360 T114 / T115 T116 / T117 T118 / T119 T680 / T681 T650 / T651 T120 / T121 T134 / T135 T140 / T141 T142 / T143 T144 / T145 T146 / T147 T148 / T149 T152 / T153 T217 / T218

Blu

T784 / T785 T792 / T793

PM-HSS Co TiCN H ≤ 3xØ 6HX

PM-HSS Co TiCN Ti Ni ≤ 1.5xØ 6HX / 3BX

T786 T787

T794 T795

ISO Taps

PM-HSSE V3 TiAlN NH ≤ 3xØ ISO 2 / 6H

T710 T666

VDI^

• • • •

• •

•

• • • •

• • • • •

•

• • •

• • • • •

• • •

• • • • •

• • • • • •

•

• • •

•

• •

• • •

• •

• • •

• • • • •

3323

• • •

• • • • • • • • • • • • • • • •

• • • • • •

•

• •

• • •

• • • • • • •

•

• • • • • • •

•

• • • • • • •

•

• •

• • • • • • • • • •

ISO

1 2 3 4 5 6 7 P 8 9 10 11 12 13 14.1 14.2 M 14.3 15 16 17 K 18 19 20 21 22 23 24 25 N 26 27 28 30 31 32 33 34 35 36 S 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 H 39.2 40 41

Tool Holding

Blu

T172

DIN Taps

6GX

PM-HSSE V3 Blu TiCN VA DH ≤ 3.5xØ 6HX

T163 T169

Carbide Endmills

T654 T168

HSS Endmills

T160 T697 T698 T350 PM-HSSE V3 TiCN VA PM ≤ 3xØ 6HX

Reamers

T161 T159 T171 T177 T182 T349 HSSE Blu TiCN Blu Blu VA ≤ 3xØ ISO 2 / 6H ISO 3 / 6G

Tech Info

HSSE Brt TiN Sticky Material ≤ 3xØ ISO 2 / 6H

T158 T170 T176 T181

205

Contents

DIN Tap Finder

Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

241 243 243 245 245 245 247 248 250 250 285 285 286 286 286 286 288 289 305 305 305 307 307 307 307 309 324 325 325 326 335 335 336 336 336 337

Sutton N VA GG AI W Ti Ni H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

Page M MF UNC UNF G (BSPF)

HSS Drills

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

For Tapping Blind Holes

ISO Taps ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers

Tech Info

VDI^ 3323

Material

T187 / T188 T189 / T190 T191 / T192 T193 / T194 T195 / T196 T339 / T340 T684 / T685 T231 / T232 T233 / T234 Catalogue Code M T183 / T184 T245 T247 T248 T246 T686 T703 MF T243 T244 T691 UNC T255 T256 T257 T258 T260 T273 T259 T275 T701 T692 UNF T274 T281 T282 T283 T699 G (BSPF) T278 T279 PM-HSSE V3 HSSE HSSE HSSE HSSE Material TiN Brt Brt Blu TiN Brt Hardlube Brt CrN Surface Finish Brt N N N N - LH N - Long UNI AI Sutton Designation ≤ 1.5xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ Tapping Depth 3B ISO 2 / 6H ISO3/6G ISO1/4H ISO 2 / 6H 6HX ISO 2 / 6H Limit & Nut Tolerance ISO 2 / 6H

Condition

N/mm2 440 640 840 910 1010 610 930 1010

• • • •

• • • • • • • •

• • • •

• •

•

• • • • • •

• • • • • • • • • • • • •

• •

1180 680 1100

•

680 810 610 840 840 610 880 570 840 460 780 210 360 270 320 460 390 320 360

• •

• • • • • • • •

• • • •

• •

•

• • • •

•

• • • • • •

• •

680 950 840 1180 1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

206

• Optimal • Effective

• •

• • • • •

•

• • • • • •

• •

• • • • • • • • • • • • •

• • • •

•

Contents HSS Drills

Carbide Drills

252 252 252 252 253 253 253 255 255 255 257 259 259 259 261 261 261 290 290 291 291 292 292 293 310 310 311 312 312 313 313 315 315 327 327 328 338 338 339 339

6HX

PM-HSSE V3 Blu TiAlN NH ≤ 2.5xØ

Blu

ISO 2 / 6H

ISO Taps

HSSE Brt TiCN VA ≤ 2.5xØ 2B

T707 T265 T667

PM-HSS Co TiCN H ≤ 1.5xØ ISO 2 / 6HX VDI^ 3323

• • • •

• • •

• • • •

• • •

• • • •

• •

• • •

• •

• • •

•

• •

• • •

• •

• • • • • • • • • • • • • • • • • • • • • • • •

•

• • •

• • • • • • • • •

• •

• • • •

• • • • • •

• • • •

•

• • • • • •

•

• •

• • •

• • • • • • •

•

• • • • • •

•

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

Tool Holding

ISO 2 / 6H

T655 T254 T263 T264 T266 T267

DIN Taps

ISO 2 / 6H

Blu

T221 / T222 T227 / T228 T229 / T230 T209 / T210 T211 / T212 T213 / T214

Carbide Endmills

HSSE CrN Cu ≤ 3xØ

T205 / T206 T678 / T679 T676 / T677 T207 / T208

T250 T252 T695 T696 T351 T352 PM-HSSE V3 Blu Blu TiCN VA PM ≤ 3xØ ISO 3 / 6G 6HX 6GX

HSS Endmills

HSSE Blu TiN W ≤ 3xØ ISO 2 / 6H

T251 T262 T277 T285 HSSE TiCN VA DH ≤ 3xØ

Reamers

T249 T261 T276 T284

Tech Info

T235 / T236 T237 / T238 T241 / T242 T239 / T240 T197 / T199 T201 / T202 T198 / T200

207

Contents

DIN Tap Finder

MF 262 UNC 317 UNF 317 G (BSPF)

Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

232

340

Sutton N VA GG AI W Ti Ni H

HSS Drills

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

For Thread Forming

ISO Taps ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers

Tech Info

VDI^ 3323

Material

T323 / T324 T319 / T320 T329 / T330 T325 / T326 T327 / T328 T331 / T332 T682 / T683 T747 / T748 Catalogue Code M T215 / T216 T309 T313 T773 T834 MF T788 / T789 UNC T790 UNF T791 T360 T363 G (BSPF) HSSE HSSE HSSE HSSE SPM PM-HSS Co VHM Material PM-HSS Co TiN Brt TiCN CrN TiAlN TiN TiCN Surface Finish TiCN Brt N N N Cu UNI NH N Sutton Designation Ti ≤ 1.5xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 2xØ ≤ 3xØ ≤ 2xØ Tapping Depth ≤ 1.5xØ 6HX 6GX 6GX 6HX 6HX 6HX 6HX 6HX 6HX Limit & Nut Tolerance 6HX/3BX

Condition

N/mm2

• •

440 640 840 910 1010 610 930

• • • •

•

• •

•

1010

• Optimal • Effective

• • • • • • • •

•

• •

1180 680 1100 680 810 610

•

• • • •

•

• • •

840 840 610

•

880 570 840 460 780 210 360 270 320 460 390 320 360

680 950 840 1180 1080

• • • • •

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

208

267 267 267 269 269 270 271 271 294 295

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

Page M 262 266 266

Contents

Back to index

DIN Taps Metric, Synchro, Gun

HSS Drills

Tarauds DIN Métrique, Synchro, Gun, PM • Pour taraudage haute vitesse • Taraudage rigide sur machines CNC avec broche synchro • Multi-Matières • Profondeur jusqu’à 2 x d1 • Queue de fraise h6

Carbide Drills

Machos DIN Métrico, Sincro, Entrada Corregida • Para roscado de alta velocidad y precisión • Para roscado rígido en máquinas CNC con sistema de sincronizado • Adecuado para materiales de hasta 850N/mm² • Agujeros pasantes de hasta 2 x d1 • Mango tolerancia h6

• For high speed and precision tapping • For rigid tapping in CNC machines with synchronised feed • Suitable for materials up to 850N/mm² • Through holes up to 2 x d1 • h6 endmill shank

ISO Taps

DIN Maschi Metrici, Synchro, Gun • Per maschiatura di precisione ad alta velocità • Per maschiatura rigida su macchine con avanzamento sincronizzato • Ideale per materiali fino a 850N/mm² • Fori passanti fino a 2 x d1 • Diametro attacco Fresa h6

0200 M 2 x 0.4 70 0250 M 2.5 x 0.45 70 0300 M 3 x 0.5 70 0400 M 4 x 0.7 70 0500 M 5 x 0.8 70 80 0600 M 6 x 1 0800 M 8 x 1.25 90 1000 M 10 x 1.5 100 1200 M 12 x 1.75 110 110 1400 M 14 x 2 110 1600 M 16 x 2 1800 M 18 x 2.5 125 2000 M 20 x 2.5 140 90 MF 8 x 1 100 MF 10 x 1 MF 10 x 1.25 100 110 MF 12 x 1 MF 12 x 1.25 110 MF 12 x 1.5 110

drill ø

6.0

4.9

8.0

1.6

4.5

6.0

4.9

8.0

2.1

6.0

4.9

8.0

2.5

6.0

4.9

8.0

3.3

6.0

4.9

8.0

4.2

6.0

4.9

8.0

5.0 6.8

8.0

6.2

9.0

10.0

8.0

11.0

8.5

12.0

9.0

12.0

10.3

14.0

11.0

14.0

12.0

16.0

12.0

15.0

14.0

16.0

12.0

15.0

15.5

16.0

12.0

15.0

17.5

8.0

6.2

9.0

7.0

10.0

8.0

11.0

9.0

10.0

8.0

11.0

8.8

12.0

9.0

12.0

11.0

12.0

9.0

12.0

10.8

12.0

9.0

12.0

10.5

TiCN

Form B / 4.5 x P

IK B

6HX

Item #

T377 0200 T377 0250 T377 0300 T377 0400 T377 0500 T377 0600 T377 0800 T377 1000 T377 1200 T377 1400 T377 1600 T377 1800 T377 2000

T379 0500 T379 0600 T379 0800 T379 1000 T379 1200 T379 1400 T379 1600 T379 1800 T379 2000

T766 • • • • • •

T768 • • • • • •

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

T377 / T766 T379 / T768

• •

ISO VDI 3323

Tech Info

Reamers

0805 1005 1006 1205 1206 1207

PM-HSSE V3

TiCN

DIN Taps

Pitch

PM-HSSE V3

M/MF

T379 D0412

Carbide Endmills

Size Ref.

T377 D0412

HSS Endmills

Vc Page #: 485 

Catalogue Code Discount Group Material Surface Finish Geometry Chamfer Shank Form (~DIN 1835) Limit & Nut Tolerance

Tool Holding

• Optimal • Effective

209

Back to index Contents

DIN Taps Metric, Synchro, Spiral Flute, R50

Carbide Drills

Machos DIN Métrico, Sincro, Helicoidal R50 • Para roscado de alta velocidad y precisión • Para roscado rígido en máquinas CNC con sistema de sincronizado • Adecuado para materiales de hasta 850N/mm² • Agujeros ciegos de hasta 2 x d1 • Mango tolerancia h6

• For high speed and precision tapping • For rigid tapping in CNC machines with synchronised feed • Suitable for materials up to 850N/mm² • Blind holes up to 2 x d1 • h6 endmill shank

HSS Drills

Taraud DIN Métrique, Synchro, Hélice 50°, PM • Pour taraudage haute vitesse • Taraudage rigide sur machines CNC avec broche synchro • Multi-Matières • Trous borgnes jusqu’à 2 x d1 • Queue de fraise h6

watch the video

DIN Maschi Metrici, Synchro, Tagliente a Elica, R50 • Per maschiatura di precisione ad alta velocità • Per maschiatura rigida su macchine con avanzamento sincronizzato • Ideale per materiali fino a 850N/mm² • Fori ciechi fino a 2 x d1 • Diametro attacco Fresa h6

ISO Taps

B Tool Holding Vc Page #: 485 

DIN Taps

M/MF

Size Ref.

Pitch

Carbide Endmills

HSS Endmills

0805 1005 1006 1205 1206 1207

90 MF 8 x 1 100 MF 10 x 1 MF 10 x 1.25 100 110 MF 12 x 1 MF 12 x 1.25 110 MF 12 x 1.5 110

drill ø

6.0

4.9

8.0

1.6

4.5

6.0

4.9

8.0

2.1

6.0

4.9

8.0

2.5

6.0

4.9

8.0

3.3

6.0

4.9

8.0

4.2

6.0

4.9

8.0

5.0 6.8

8.0

6.2

9.0

10.0

8.0

11.0

8.5

12.0

9.0

12.0

10.3

14.0

11.0

14.0

12.0

16.0

12.0

15.0

14.0

16.0

12.0

15.0

15.5

16.0

12.0

15.0

17.5

8.0

6.2

9.0

7.0

10.0

8.0

11.0

9.0

10.0

8.0

11.0

8.8

12.0

9.0

12.0

11.0

12.0

9.0

12.0

10.8

12.0

9.0

12.0

10.5

Catalogue Code Discount Group Material Surface Finish Geometry Chamfer Shank Form (~DIN 1835) Limit & Nut Tolerance

T373

T375

D0412

PM-HSSE V3

TiCN

R50

R50 IK

Form C / 2.5 x P

6HX

Item #

T373 0200 T373 0250 T373 0300 T373 0400 T373 0500 T373 0600 T373 0800 T373 1000 T373 1200 T373 1400 T373 1600 T373 1800 T373 2000

T375 0500 T375 0600 T375 0800 T375 1000 T375 1200 T375 1400 T375 1600 T375 1800 T375 2000

T762 • • • • • •

T764 • • • • • •

Reamers 5

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

210

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

T373 / T762 T375 / T764

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

DIN Taps Metric, Synchro, Spiral Flute, L20 Machos DIN Métrico, Sincro, Helicoidal L20 • Corte a derecha / Hélice a izquierda • Para roscado de alta velocidad y precisión • Para roscado rígido en máquinas CNC con sistema sincronizado • Adecuado para materiales de hasta 850N/mm² • Ideal para agujeros pasantes con salida angular o corte interrumpido

• Right hand cutting / Left hand helix • For high speed and precision tapping • For rigid tapping in CNC machines with synchronised feed • Suitable for materials up to 850N/mm² • Ideal for through holes with angular exit or interrupted hole

HSS Drills

Tarauds DIN Métrique, Synchro, Hélice à gauche 20°, PM • Coupe à droite, Hélice à gauche • Pour taraudage haute vitesse • Taraudage rigide sur machines CNC avec broche synchro • Multi-Matières • Profondeur jusqu’à 2 x d1 • Queue de fraise h6 • Idéal pour trous débouchants avec sorties en angle ou trous interrompus

Carbide Drills

Contents

Back to index

ISO Taps

DIN Maschi Metrici, Synchro, Tagliente a Elica, L20 • Elica destra / Elica sinistra • Per maschiatura di precisione ad alta velocità • Per maschiatura rigida su macchine con avanzamento sincronizzato • Ideale per materiali fino a 850N/mm² • Consigliato per fori passanti con uscita inclinata o a taglio interrotto

90 MF 8 x 1 100 MF 10 x 1 MF 10 x 1.25 100 110 MF 12 x 1 MF 12 x 1.25 110 MF 12 x 1.5 110

drill ø

6.0

4.9

8.0

1.6

6.0

4.9

8.0

2.1

6.0

4.9

8.0

2.5

6.0

4.9

8.0

3.3

6.0

4.9

8.0

4.2

6.0

4.9

8.0

5.0 6.8

8.0

6.2

9.0

10.0

8.0

11.0

8.5

12.0

9.0

12.0

10.3

14.0

11.0

14.0

12.0

16.0

12.0

15.0

14.0

16.0

12.0

15.0

15.5

16.0

12.0

15.0

17.5

8.0

6.2

9.0

7.0

10.0

8.0

11.0

9.0

10.0

8.0

11.0

8.8

12.0

9.0

12.0

11.0

12.0

9.0

12.0

10.8

12.0

9.0

12.0

10.5

TiCN

L20

L20 IK

Form D / 4 x P

6HX

Item #

T365 0200 T365 0250 T365 0300 T365 0400 T365 0500 T365 0600 T365 0800 T365 1000 T365 1200 T365 1400 T365 1600 T365 1800 T365 2000

T367 0500 T367 0600 T367 0800 T367 1000 T367 1200 T367 1400 T367 1600 T367 1800 T367 2000

T754 • • • • • •

T756 • • • • • •

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

T365 / T754 T367 / T756

• •

ISO VDI 3323

Tech Info

Reamers

0805 1005 1006 1205 1206 1207

PM-HSSE V3

TiCN

DIN Taps

Pitch

PM-HSSE V3

M/MF

T367 D0412

Carbide Endmills

Size Ref.

T365 D0412

HSS Endmills

Vc Page #: 485 

Catalogue Code Discount Group Material Surface Finish Geometry Chamfer Shank Form (~DIN 1835) Limit & Nut Tolerance

Tool Holding

• Optimal • Effective

211

Back to index Contents

DIN Taps Metric, Synchro, Spiral Flute, R45 Al

Carbide Drills

Machos DIN Métrico, Sincro, Helicoidal R45 Al • Para roscado de alta velocidad y precisión • Para roscado rígido en máquinas CNC con sistema de sincronizado • Adecuado para aluminio y aluminio aleado • Agujeros ciegos de hasta 2 x d1 • Mango tolerancia h6

• For high speed and precision tapping • For rigid tapping in CNC machines with synchronised feed • For aluminium & aluminium alloys • Blind holes up to 2 x d1 • h6 endmill shank

HSS Drills

Tarauds DIN Métrique, Synchro, Hélice 45°, coupe aluminium, PM • Pour taraudage haute vitesse • Taraudage rigide sur machines CNC avec broche synchro • Pour aluminium et alliages d’aluminium • Trous borgnes jusqu’à 2 x d1 • Queue de fraise h6 DIN Maschi Metrici, Synchro, Tagliente a Elica, R45 Al • Per maschiatura di precisione ad alta velocità • Per maschiatura rigida su macchine con avanzamento sincronizzato • Ideale per alluminio e leghe di alluminio • Fori ciechi fino a 2 x d1 • Diametro attacco Fresa h6

ISO Taps

B Tool Holding Vc Page #: 485 

DIN Taps

M/MF

Size Ref.

Pitch

Carbide Endmills

HSS Endmills

0805 1005 1006 1205 1206 1207

90 MF 8 x 1 100 MF 10 x 1 MF 10 x 1.25 100 110 MF 12 x 1 MF 12 x 1.25 110 MF 12 x 1.5 110

drill ø

6.0

4.9

8.0

1.6

4.5

6.0

4.9

8.0

2.1

6.0

4.9

8.0

2.5

6.0

4.9

8.0

3.3

6.0

4.9

8.0

4.2

6.0

4.9

8.0

5.0 6.8

8.0

6.2

9.0

10.0

8.0

11.0

8.5

12.0

9.0

12.0

10.3

14.0

11.0

14.0

12.0

16.0

12.0

15.0

14.0

16.0

12.0

15.0

15.5

16.0

12.0

15.0

17.5

8.0

6.2

9.0

7.0

10.0

8.0

11.0

9.0

10.0

8.0

11.0

8.8

12.0

9.0

12.0

11.0

12.0

9.0

12.0

10.8

12.0

9.0

12.0

10.5

Catalogue Code Discount Group Material Surface Finish Geometry Chamfer Shank Form (~DIN 1835) Limit & Nut Tolerance

T369

T371

D0412

PM-HSSE V3

CrN

R45

R45 IK

Form C / 2.5 x P

6HX

Item #

T369 0200 T369 0250 T369 0300 T369 0400 T369 0500 T369 0600 T369 0800 T369 1000 T369 1200 T369 1400 T369 1600 T369 1800 T369 2000

T371 0500 T371 0600 T371 0800 T371 1000 T371 1200 T371 1400 T371 1600 T371 1800 T371 2000

T758 • • • • • •

T760 • • • • • •

Reamers 2

M 8

T369 / T758 T371 / T760 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

212

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

DIN Taps Metric, Synchro, Forming Machos DIN Métrico, Sincro, Laminación • Para roscado de alta velocidad y precisión • Para roscado rígido en máquinas CNC con sistema sincronizado • Para aluminio y aleaciones de aluminio. • Proceso de deformación plástica para imprimir perfil en el material. • Agujeros ciegos y pasantes hasta 2 x d1 • Mango tolerancia 6h

• For high speed and precision tapping • For rigid tapping in CNC machines with synchronised feed • For aluminium and aluminium alloys • Process of plastic deformation to imprint thread on material • Blind holes up to 2 x d1 • h6 endmill shank

HSS Drills

Tarauds DIN Métrique, Synchro, par déformation, PM • Pour taraudage haute vitesse • Taraudage rigide sur machines CNC avec broche synchro • Pour aluminium et alliages d’aluminium • Trous borgnes jusqu’à 2 x d1 • Queue de fraise h6

Carbide Drills

Contents

Back to index

ISO Taps

DIN Maschi Metrici, Synchro, Rullare • Per maschiatura di precisione ad alta velocità • Per maschiatura rigida su macchine con avanzamento sincronizzato • Ideale per alluminio e leghe di alluminio • Processo di rullatura per imprimere il filetto con deformazione plastica • Fori ciechi fino a 2 x d1 • Diametro attacco Fresa h6

drill ø

6.0

4.9

8.0

1.8

4.5

6.0

4.9

8.0

2.3

6.0

4.9

8.0

2.8

6.0

4.9

8.0

3.7

6.0

4.9

8.0

4.6

6.0

4.9

8.0

5.5 7.4

8.0

6.2

9.0

10.0

8.0

11.0

9.3

12.0

9.0

12.0

11.2

14.0

11.0

14.0

13.1

16.0

12.0

15.0

15.1

16.0

12.0

15.0

16.9

16.0

12.0

15.0

18.9

8.0

6.2

9.0

7.5

10.0

8.0

11.0

9.5

10.0

8.0

11.0

9.4

12.0

9.0

12.0

11.5

12.0

9.0

12.0

11.4

12.0

9.0

12.0

11.3

TiN

Multi-Coolant Groove

Multi-Coolant Groove IK

Form C / 2.5 x P

6HX

Item #

T381 0200 T381 0250 T381 0300 T381 0400 T381 0500 T381 0600 T381 0800 T381 1000 T381 1200 T381 1400 T381 1600 T381 1800 T381 2000

T383 0500 T383 0600 T383 0800 T383 1000 T383 1200 T383 1400 T383 1600 T383 1800 T383 2000

T770 • • • • • •

T772 • • • • • •

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

• • • •

• • • • • • • •

T381 / T770 T383 / T772

• •

ISO VDI 3323

Tech Info

Reamers

0800 1005 1006 1205 1206 1207

PM-HSSE V3

TiN

DIN Taps

Pitch

PM-HSSE V3

M/MF

T383 D0412

Carbide Endmills

Size Ref.

T381 D0412

HSS Endmills

Vc Page #: 485 

Catalogue Code Discount Group Material Surface Finish Geometry Chamfer Shank Form (~DIN 1835) Limit & Nut Tolerance

Tool Holding

• Optimal • Effective

213

Back to index Contents

DIN Taps Metric, Straight Flute, N

Carbide Drills

Machos DIN Métrico, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Profundidades hasta 1.5 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Depths up to 1.5 x d1 Tarauds DIN Métrique, Goujure Droite, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Profondeur jusqu’à 1.5 x d1

HSS Drills

DIN Maschi Metrici, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Profondità fino a 1.5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  Size Ref.

DIN Taps

Carbide Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0700 0800 1000

Pitch

drill ø

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

7.0

5.5

6.0

8.0

6.2

6.8

10.0

8.0

8.5

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 80 M7 x1 M 8 x 1.25 90 M 10 x 1.5 100

T286

T288

D0402

D0406

HSSE

Brt

TiN

Form C / 2.5 x P

ISO 2 / 6H

Item #

T286 0200 T286 0220 T286 0230 T286 0250 T286 0260 T286 0300 T286 0350 T286 0400 T286 0500 T286 0600 • T286 0800 T286 1000

• • • • • •

HSS Endmills Reamers 4

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

214

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • •

• •

T286 T288

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Straight Flute, N

Carbide Drills

Machos DIN Métrico, Ranuras Rectas, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Profundidades hasta 1.5 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through & blind holes • Depths up to 1.5 x d1

HSS Drills

Tarauds DIN Métrique, Goujure Droite, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Profondeur jusqu’à 1.5 x d1

0600 0800 1000 1200 1400 1600 1800 2000 2200 2400 2700 3000

Pitch

drill ø

4.5

3.4

5.0

6.0

4.9

6.8

7.0

5.5

8.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

HSSE

Brt

TiN

Form C / 2.5 x P

ISO 2 / 6H

Item #

T287 0600 T287 0800 T287 1000 T287 1200 T287 1400 T287 1600 T287 1800 T287 2000 T287 2200 T287 2400 T287 2700 T287 3000

• • • • • •

•

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • •

• • • • • • • •

• • • • • • • • • • • • • • • •

T287 T289

• •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180

HSSE

Size Ref.

T289 D0406

DIN Taps

Vc Page #: 484 

T287 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi Metrici, Elica dritta, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti • Profondità fino a 1.5 x d1

• Optimal • Effective

215

Back to index Contents

DIN Taps Metric, Straight Flute, GG

Carbide Drills

• For use in grey cast iron (GG) • Through & blind holes • Depths up to 3 x d1 Tarauds DIN Métrique, Goujure Droite, type GG • Recommandé pour les fontes grises (GG) • Pour trous borgnes et débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Elica dritta, GG • Maschio per ghisa grigia (GG) • Fori ciechi & passanti • Profondità fino a 3 x d1 Machos DIN Métrico, Ranuras Rectas, GG • Para uso en fundición gris (GG) • Agujeros pasantes y ciegos • Profundidades hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484 

Carbide Endmills HSS Endmills

Size Ref.

Reamers

0600 0800 1000 1200 1400 1600 1800 2000

Low Relief

Form C / 2.5 x P

6HX

Item #

drill ø

M 2 x 0.40 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

8 9 9 9 9 11 13 13 16 19 22 24

18 20 21 25 30 35 39

2.8 2.8 2.8 2.8 2.8 3.5 4.0 4.5 6.0 6.0 8.0 10.0

2.1 2.1 2.1 2.1 2.1 2.7 3.0 3.4 4.9 4.9 6.2 8.0

5 5 5 5 5 6 6 6 8 8 9 11

4 4 4 4 4 4 4 4 4 4 4 4

1.6 1.75 1.9 2.05 2.15 2.5 2.9 3.3 4.2 5.0 6.8 8.5

• • • • • T290 0300 • T290 0400 T290 0500 T290 0600 T290 0800 T290 1000

• • • • • T292 0300 • T292 0400 T292 0500 T292 0600 T292 0800 T292 1000

drill ø

Item #

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

19 22 24 28 30 32 34 34

4.5 6.0 7.0 9.0 11.0 12.0 14.0 16.0

3.4 4.9 5.5 7.0 9.0 9.0 11.0 12.0

6 8 8 10 12 12 14 15

4 4 4 4 4 4 4 4

5.0 6.8 8.5 10.2 12.0 14.0 15.5 17.5

T291 T291 0600 T291 0800 T291 1000 T291 1200 T291 1400 T291 1600 • T291 2000

T293 T293 0600 T293 0800 T293 1000 T293 1200 T293 1400 T293 1600 • T293 2000

Pitch

Tech Info

P 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

T290 / T291 T292 / T293 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

216

TiCN

DIN 376

HSSE

Pitch

ISO VDI 3323

HSSE Ni + Blu

DIN 371

• • • • • • • • • • • •

DIN Taps

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T292 D0408

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

Size Ref.

T290 D0402

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Straight Flute, GGG

Carbide Drills

• VHM, for use in Al >10% Si & cast iron (GGG) • Through & blind holes • Depths up to 3 x d1 Tarauds DIN Métrique, Goujure Droite, type GGG • Taraud CARBURE, recommandé pour les Al >10% Si & fonte (GGG) • Trous borgnes & débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Elica dritta, GGG • Maschio metallo duro specifico per Al >10% Si & ghisa (GGG) • Fori ciechi & passanti • Profondità fino a 3 x d1

IK Form C / 2.5 x P

Item #

drill ø

M 2 x 0.40 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

8 9 9 9 9 11 13 13 16 19 22 24

18 20 21 25 30 35 39

2.8 2.8 2.8 2.8 2.8 3.5 4.0 4.5 6.0 6.0 8.0 10.0

2.1 2.1 2.1 2.1 2.1 2.7 3.0 3.4 4.9 4.9 6.2 8.0

5 5 5 5 5 6 6 6 8 8 9 11

4 4 4 4 4 4 4 4 4 4 4 4

1.6 1.75 1.9 2.05 2.15 2.5 2.9 3.3 4.2 5.1 6.9 8.6

• • • • • • • • • T670 0600 T670 0800 T670 1000

• • • • • • • • • • • •

drill ø

Item #

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

19 22 24 28 30 32 34 34

4.5 6.0 7.0 9.0 11.0 12.0 14.0 16.0

3.4 4.9 5.5 7.0 9.0 9.0 11.0 12.0

6 8 8 10 12 12 14 15

4 4 4 4 4 4 4 4

5.1 6.9 8.6 10.3 12.1 14.1 15.7 17.7

T671 • • • T671 1200 • T671 1600 • •

T742 • • • • • • • •

Pitch

P 2

M 8

Carbide Endmills

DIN Taps

DIN 376

Low Relief Form C / 2.5 x P

ISO VDI 3323

GGG

Reamers

0600 0800 1000 1200 1400 1600 1800 2000

TiCN

GGG

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • •

T670 / T671 T741 / T742

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

Size Ref.

VHM

TiCN

Pitch

• •

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

VHM

DIN 371

• •

Size Ref.

T741 D0414

HSS Endmills

Vc Page #: 484 

T670 D0414

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Ranuras Rectas, GGG • VHM, para uso en Al> 10% Si y fundición (GGG) • Agujeros pasantes y ciegos • Profundidades hasta 3 x d1

• Optimal • Effective

217

Back to index Contents

DIN Taps Metric, Straight Flute, DC

Carbide Drills

Machos DIN Métrico, Ranuras Rectas, DC • Para roscado de producción en materiales de fundición prensada • PM-HSS Co para una mayor vida útil de la herramienta • Forma E para máxima profundidad de rosca en agujeros ciegos • Profundidades hasta 1.5 x d1

• For production tapping in die cast materials • PM-HSS Co for superior tool life • Form E for maximum thread depth in blind holes • Depths up to 1.5 x d1 Tarauds DIN Métrique, Goujure Droite, type DC • Pour le taraudage de production dans les fondries d’aluminium • PM-HSS Co pour une meilleure durée de vie • Entrée Form E pour un taraudage plus profond dans les trous borgnes • Profondeur jusqu’à 1.5 x d1

HSS Drills

DIN Maschi Metrici, Elica dritta, DC • Maschio per la produzione di filetti su pre stampati • PM-HSS Co per una vita utensile maggiore • Form E per raggiungere il massimo della profondita nei fori ciechi • Profondità fino a 1.5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  Size Ref.

DIN Taps

0600 0800 1000

T335

T357

D0408

PM-HSS Co

TiCN

Die Cast

Form E / 1.5 x P

6HX

Item #

Item # T357 0600 T357 0800 T357 1000

drill ø

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

T335 0600 T335 0800 T335 1000

drill ø

Item #

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 20 x 2.5 140

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

16.0

12.0

17.5

T336 T336 1200 T336 1400 T336 1600 T336 2000

T358 T358 1200 T358 1400 T358 1600 T358 2000

Pitch

DIN 371

Carbide Endmills HSS Endmills

Size Ref.

1200 1400 1600 2000

Pitch

DIN 376

Reamers 4

M 8

T335 / T336 T357 / T358

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

218

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• •

• • • • • •

• • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Straight Flute, XH

Carbide Drills

• Use in hardened steels 42-52 HRC • Through & blind holes • Depths up to 1.5 x d1 Tarauds DIN Métrique, Goujure Droite, type XH • Recommandé pour les aciers 42-52 HRC • Pour trous borgnes & débouchants • Profondeur jusqu’à 1.5 x d1

HSS Drills

DIN Maschi Metrici, Elica dritta, XH • Maschio per materiali temprati 42-52 HRC • Fori ciechi & passanti • Profondità fino a 1.5 x d1

drill ø

M 3 x 0.5 46 M 4 x 0.7 52 M 5 x 0.8 60 62 M6 x1 M 8 x 1.25 70 M 10 x 1.5 75 M 12 x 1.75 82 95 M 16 x 2 M 20 x 2.5 105 120 M 24 x 3

3.5

2.7

2.55

4.5

3.4

6.0

4.9

4.3

6.0

4.9

5.1

6.0

4.9

6.9

7.0

5.5

8.6

9.0

7.0

10.3

Pitch

12.0

9.0

14.1

16.0

12.0

17.7

18.0

14.5

21.0

SPM TiCN

Special Relief

Form C / 3 x P

Form D / 5 x P

6HX

Item #

T294 0300 T294 0400 T294 0500 T294 0600 T294 0800 T294 1000 T294 1200 T294 1600 T294 2000 T294 2400

T295 0300 T295 0400 T295 0500 T295 0600 T295 0800 T295 1000 T295 1200 T295 1600 T295 2000 T295 2400

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• •

T294 T295

• • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0300 0400 0500 0600 0800 1000 1200 1600 2000 2400

SPM TiCN

Size Ref.

T295 DO408

DIN Taps

Vc Page #: 484 

T294 DO408

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Ranuras Rectas, XH • Uso en aceros endurecidos 42-52 HRC • Agujeros pasantes y ciegos • Profundidades de hasta 1.5 x d1

• Optimal • Effective

219

Back to index Contents

DIN Taps Metric, Straight Flute, VH

Carbide Drills

• Use in hardened steels 50-60 HRC • Through & blind holes • Depths up to 1.5 x d1 Tarauds DIN Métrique, Goujure Droite, type VH • Recommandé pour les aciers jusqu’à 50-60 HRC • Pour trous borgnes & débouchants • Depths up to 1.5 x d1

220

HSS Drills

DIN Maschi Metrici, Elica dritta, VH • Maschio per materiali temprati 50-60 HRC • Fori ciechi & passanti • Profondità fino a 1.5 x d1 Machos DIN Métrico, Ranuras Rectas, VH • Uso en aceros endurecidos 50-60 HRC • Agujeros pasantes y ciegos • Profundidades de hasta 1.5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  l1

drill ø

0300 0400 0500 0600 0800 1000

M 3 x 0.5 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

3.5

2.7

2.55

4.5

3.4

6.0

4.9

4.3

6.0

4.9

5.1

8.0

6.2

6.9

10.0

8.0

8.6

1200 1600 2000

M 12 x 1.75 110 110 M 16 x 2 M 20 x 2.5 140

9.0

7.0

10.3

12.0

9.0

14.1

16.0

12.0

17.7

Size Ref.

DIN Taps

Pitch

DIN 371

Carbide Endmills

DIN 376

T296

T297

D0414

VHM

TiCN

Special Relief

Form C / 3 x P

Form D / 5 x P

6HX

Item #

T296 0300 T296 0400 T296 0500 T296 0600 T296 0800 T296 1000

T297 0300 T297 0400 T297 0500 T297 0600 T297 0800 T297 1000

T296 1200 T296 1600 T296 2000

T297 1200 T297 1600 T297 2000

HSS Endmills Reamers 5

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

220

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • •

• •

T296 T297

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Gun, N

Carbide Drills

Machos DIN Métrico, Entrada Corregida, N • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique, Gun, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1

Pitch

drill ø

2.5

2.1

0.75

2.5

2.1

0.85

2.5

2.1

0.95

2.5

2.1

1.1

2.5

2.1

1.25

2.5

2.1

1.35

2.5

2.1

1.45

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

7.0

5.5

6.0

8.0

6.2

6.8

10.0

8.0

8.5

HSSE

Brt

Blu

TiN

Form B / 4.5 x P

ISO 2 / 6H

Item #

T100 0100 • T100 0120 T100 0140 T100 0160 • T100 0180 T100 0200 T100 0220 T100 0230 T100 0250 T100 0260 T100 0300 T100 0350 T100 0400 T100 0500 T100 0600 T100 0700 T100 0800 T100 1000

• • • • • • • T102 0200 T102 0220 T102 0230 T102 0250 T102 0260 T102 0300 T102 0350 T102 0400 T102 0500 T102 0600 T102 0700 T102 0800 T102 1000

• • • • • • • • • • • • T104 0300 T104 0350 T104 0400 T104 0500 T104 0600 • T104 0800 T104 1000

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • • • • • • • • • • • • • • • • • •

T100 T102 T104

• • •

ISO VDI 3323

Tech Info

Reamers

M 1 x 0.25 40 M 1.1 x 0.25 40 M 1.2 x 0.25 40 M 1.4 x 0.3 40 M 1.6 x 0.35 40 M 1.7 x 0.35 40 M 1.8 x 0.35 40 M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 80 M7 x1 M 8 x 1.25 90 M 10 x 1.5 100

HSSE

0100 0110 0120 0140 0160 0170 0180 0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0700 0800 1000

T104 D0406

DIN Taps

Size Ref.

T102 D0402

Carbide Endmills

Vc Page #: 483 

T100 D0402

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi Metrici, Gun, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a 3 x d1

• Optimal • Effective

221

Back to index Contents

DIN Taps Metric, Gun, N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to 3 x d1 Tarauds DIN Métrique, Gun, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Gun, N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a 3 x d1

ISO Taps

Machos DIN Métrico, Entrada Corregida, N • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills HSS Endmills

drill ø

M 3 x 0.5 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180 M 33 x 3.5 180 200 M 36 x 4 200 M 39 x 4 M 42 x 4.5 200 M 45 x 4.5 220 250 M 48 x 5 250 M 52 x 5

2.2

2.5

2.8

2.1

3.3

3.5

2.7

4.2

4.5

3.4

5.0

6.0

4.9

6.8

7.0

5.5

8.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

25.0

20.0

29.5

28.0

22.0

32.0

24.0

35.0

32.0

24.0

37.5

36.0

29.0

40.5

36.0

29.0

43.0

40.0

32.0

47.0

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4200 4500 4800 5200

Pitch

T101

T103

T105

D0402

D0406

HSSE

Brt

Blu

TiN

Form B / 4.5 x P

ISO 2 / 6H

Item #

T101 0300 T101 0400 T101 0500 T101 0600 T101 0800 T101 1000 T101 1200 T101 1400 T101 1600 T101 1800 T101 2000 T101 2200 T101 2400 T101 2700 T101 3000 T101 3300 T101 3600 T101 3900 T101 4200 T101 4500 T101 4800 T101 5200

• • • T103 0600 T103 0800 T103 1000 T103 1200 T103 1400 T103 1600 T103 1800 T103 2000 T103 2200 T103 2400 • T103 3000 • T103 3600 • T103 4200 • T103 4800 T103 5200

• • • T105 0600 T105 0800 T105 1000 T105 1200 T105 1400 T105 1600 T105 1800 T105 2000 T105 2200 T105 2400 T105 2700 T105 3000 • • • • • • •

Reamers 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • •

T101 T103 T105

• • • • • • • • • • • • • • • • • • • •

Tech Info

222

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Gun, N - 6G, 4H, LH

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique, Gun, type N, 6G-4H-A gauche • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi Metrici, Gun, N 6G, 4H, LH • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a 3 x d1

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

Pitch

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

HSSE

Brt

Left Hand

Form B / 4.5 x P

ISO 3 / 6G

ISO 2 / 6H LH

Item #

• • • • • T106 0300 T106 0350 T106 0400 T106 0500 T106 0600 T106 0800 T106 1000

• • • • • T648 0300 • T648 0400 T648 0500 T648 0600 T648 0800 T648 1000

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • •

• • • • • • • • • • • •

• •

• • • •

• • • • • • • •

T106 T648

• •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. *Not available once current stock is depleted

Tech Info

Reamers

HSS Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

HSSE

Size Ref.

T648 D0402

DIN Taps

Vc Page #: 483 

T106 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Entrada Corregida, N - 6G, 4H, LH • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

• Optimal • Effective

223

Back to index Contents

DIN Taps Metric, Gun, N - 6G, 4H, LH

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Through holes • Depths up to 3 x d1 Tarauds DIN Métrique, Gun, type N, 6G - 4H-A gauche • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Gun, N 6G, 4H, LH • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori passanti • Profondità fino a 3 x d1

ISO Taps

Machos DIN Métrico, Entrada Corregida, N - 6G, 4H, LH • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

drill ø

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

4.5

3.4

5.0

6.0

4.9

6.8

7.0

5.5

8.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

0600 0800 1000 1200 1400 1600 1800 2000

Pitch

T107

T649

D0402

HSSE

Brt

Left Hand

Form B / 4.5 x P

ISO 3 / 6G

ISO 2 / 6H LH

Item #

• • • T107 1200 • T107 1600 • T107 2000

• • • T649 1200 T649 1400 T649 1600 T649 1800 T649 2000

HSS Endmills Reamers 7

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

224

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

• • • • • • • • • • • •

• •

• • • •

T107 T649

• • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. *Not available once current stock is depleted

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Gun, N, Extra Length

Carbide Drills

• For long reach applications • Suitable for materials up to 1000N/mm² • Depths up to 3 x d1 • d2 and sq in accordance to DIN371

HSS Drills

Tarauds DIN Métrique, Gun, type N, Extra long • Pour taraudages profonds • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants et profondeur jusqu’à 3 x d1 • Diamètre de queue et carré suivant DIN371 DIN Maschi Metrici, Gun, N, Extra Lungo • Maschio per applicazioni profonde • Ideale per materiali fino a 1000N/mm² • Profondità fino a 3 x d1 • d2 e sq a seconda della normativa DIN371

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483 

T337 D0402 HSSE Brt

N Extra Length Form B / 4.5 x P ISO 2 / 6H

Pitch

drill ø

0300 0400 0500 0600 0800

M3 M4 M5 M6 M8

x 0.5 112 x 0.7 126 x 0.8 140 160 x1 x 1.25 180

3.5

2.7

2.5

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

T337 0300 T337 0400 T337 0500 T337 0600 T337 0800

Size Ref.

Pitch

drill ø

Item #

1000 1200 1400 1600 2000 2400

M 10 x 1.5 200 M 12 x 1.75 220 220 M 14 x 2 220 M 16 x 2 M 20 x 2.5 280 320 M 24 x 3

100

7.0

5.5

8.5

110

9.0

7.0

10.2

110

11.0

9.0

12.0

110

12.0

9.0

14.0

110

16.0

12.0

17.5

120

18.0

14.5

21.0

Item #

DIN Taps

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • •

• •

• • • •

• • • • • • • •

T337 T338

Reamers Tech Info

ISO VDI 3323

T338 T338 1000 T338 1200 T338 1400 T338 1600 T338 2000 T338 2400

HSS Endmills

Carbide Endmills

Size Ref.

Tool Holding

ISO Taps

Machos DIN Métrico, Entrada Corregida, N, Extra Largo • Para aplicaciones de largo alcance • Adecuado para materiales hasta 1000N/mm² • Profundidades hasta 3 x d1 • d2 y sq según DIN371

• Optimal • Effective

225

Back to index Contents

DIN Taps Metric, Gun, Black Magic

Carbide Drills

Machos DIN Métrico, Entrada Corregida, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Through holes up to 3 x d1 • Suitable for synchronous tapping in machine operations

watch the video

HSS Drills

Tarauds DIN Métrique, Gun, Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous débouchants jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

ISO Taps

DIN Maschi Metrici, Gun, Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori passanti fino a 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

Pitch

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

T687 D0410 PM-HSSE V3 HARDLUBE

UNI Special Relief Form B / 4.5 x P 6HX

Item # • • • • • T687 0300 • T687 0400 T687 0500 T687 0600 T687 0800 T687 1000

HSS Endmills Reamers 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • •

• • • •

•

• •

T687

• • • •

Tech Info

226

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Contents

Back to index

watch the video

HSS Drills

Carbide Drills

DIN Taps Metric, Gun, Black Magic

ISO Taps

Vc Page #: 483  l2

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180

17.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

Form B / 4.5 x P 6HX

Item # T688 1200 T688 1400 T688 1600 T688 1800 T688 2000 • • • •

drill ø

UNI Special Relief

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • •

• • • •

• •

• • • •

T688

•

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

1200 1400 1600 1800 2000 2200 2400 2700 3000

Pitch

HARDLUBE

DIN Taps

PM-HSSE V3

Carbide Endmills

Size Ref.

T688 D0410

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

227

Back to index Contents

DIN Taps Metric, Gun, W & Cu

Carbide Drills

• Suitable for use in soft materials • CrN (Ni) for copper and non-ferrous materials • Through holes • Depths up to 3 x d1 Tarauds DIN Métrique, Gun, type W & CU • Convient aux matériaux tendres • Traitement Ni pour les cuivres et non-ferreux • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Gun, W & Cu • Ideale per materiali morbidi • CrN per rame e materiali non ferrosi • Fori passanti • Profondità fino a 3 x d1

ISO Taps

Machos DIN Métrico, Entrada Corregida, W & Cu • Adecuado para uso en materiales blandos. • CrN para cobre y materiales no ferrosos. • Agujeros pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

Pitch

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

T122

T124

T126

D0402

D0404

HSSE

Blu

CrN

Form B / 4.5 x P

ISO 2 / 6H

Item #

T122 0200 • • T122 0250 • T122 0300 T122 0350 T122 0400 T122 0500 T122 0600 T122 0800 T122 1000

• • • • • T124 0300 • T124 0400 T124 0500 T124 0600 T124 0800 T124 1000

• • • • • T126 0300 • T126 0400 T126 0500 T126 0600 T126 0800 T126 1000

HSS Endmills Reamers 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • • • • • •

• • • •

T122 T124 T126

• • • • • • • •

Tech Info

228

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Gun, W & Cu

Carbide Drills

• Use in soft elastic materials • Through holes • Depths up to 3 x d1 Tarauds DIN Métrique, type W-Alternés • Convient aux matériaux tendres • Trous débouchants • Prodondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Gun, W-AZ • Ideale per materiali elastici morbidi • Fori passanti • Profondità fino a 3 x d1

drill ø

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

4.5

3.4

5.0

6.0

4.9

6.8

7.0

5.5

8.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

Pitch

HSSE

Blu

CrN

Form B / 4.5 x P

ISO 2 / 6H

Item #

• • • T123 1200 T123 1400 T123 1600 T123 1800 T123 2000

• • • T125 1200 • T125 1600 • T125 2000

• • • T127 1200 • T127 1600 • T127 2000

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

• • • • • • • •

T123 T125 T127

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0600 0800 1000 1200 1400 1600 1800 2000

T127 D0404

Size Ref.

T125 D0402

DIN Taps

Vc Page #: 483 

T123 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Entrada Corregida, W-AZ • Adecuado para uso en materiales blandos. • Agujeros pasantes • Profundidades hasta 3 x d1

229

Back to index Contents

DIN Taps Metric, Gun, W-AZ

Carbide Drills

HSS Drills

DIN Maschi Metrici, Gun, W-AZ • Ideale per materiali elastici morbidi • Fori passanti • Profondità fino a 3 x d1 Machos DIN Métrico, Entrada Corregida, W-AZ • Adecuado para uso en materiales blandos. • Agujeros pasantes • Profundidades hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T128

T130

D0402

D0406

HSSE

Brt

TiN

Sticky Material

Interrupted Threads

Form B / 4.5 x P

ISO 2 / 6H

Item #

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

8 9 9 9 9 11 13 13 16 19 22 24

18 20 21 25 30 35 39

2.8 2.8 2.8 2.8 2.8 3.5 4.0 4.5 6.0 6.0 8.0 10.0

2.1 2.1 2.1 2.1 2.1 2.7 3.0 3.4 4.9 4.9 6.2 8.0

5 5 5 5 5 6 6 6 8 8 9 11

3 3 3 3 3 3 3 3 3 3 3 3

1.6 1.75 1.9 2.05 2.15 2.5 2.9 3.3 4.2 5.0 6.8 8.5

• • • • • T128 0300 • T128 0400 T128 0500 T128 0600 T128 0800 T128 1000

• • • • • T130 0300 • T130 0400 T130 0500 T130 0600 T130 0800 T130 1000

drill ø

Item #

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2

19 22 24 28 30 32

4.5 6.0 7.0 9.0 11.0 12.0

3.4 4.9 5.5 7.0 9.0 9.0

6 8 8 10 12 12

3 3 3 3 3 3

5.0 6.8 8.5 10.2 12.0 14.0

T129 • • • T129 1200 T129 1400 T129 1600

T131 • • • T131 1200 T131 1400 T131 1600

Pitch

DIN371

HSS Endmills DIN376

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

230

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

• •

•

T128 / T129 T130 / T131

• • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

Pitch

• • • • • • • •

Reamers

0600 0800 1000 1200 1400 1600

• • • •

Size Ref.

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Gun, VA

Carbide Drills

• Use in stainless steels and high strength steels • Suitable for materials up to 850N/mm² • Through holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique, Gun, type VA • Recommandés pour les inox et métaux à copeaux longs • Convient aux matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi Metrici, Gun, VA • Maschio per acciai inossidabili e acciai ad alta resistenza • Ideale per materiali fino a 850N/mm² • Fori passanti • Profondità fino a 3 x d1

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

Pitch

drill ø

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

HSSE

Blu

TiCN

Special Relief

Form B / 4.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

Item #

• • • • • T110 0300 T110 0350 T110 0400 T110 0500 T110 0600 T110 0800 T110 1000

• • • • • • • • • • • •

• • • • • T112 0300 T112 0350 T112 0400 T112 0500 T112 0600 T112 0800 T112 1000

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

•

• • • • • •

• • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • •

T110 T359 T112

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

M 2 x 0.4 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

T112 D0408

Size Ref.

T359 D0402

DIN Taps

Vc Page #: 483 

T110 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Entrada Corregida, VA • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1.

• Optimal • Effective

231

Back to index Contents

DIN Taps Metric, Gun, VA

Carbide Drills

• Use in stainless steels and high strength steels • Suitable for materials up to 850N/mm² • Through holes • Depths up to 3 x d1 Tarauds DIN Métrique, Gun, type VA • Recommandés pour les inox et métaux à copeaux longs • Convient aux matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Gun, VA • Maschio per acciai inossidabili e acciai ad alta resistenza • Ideale per materiali fino a 850N/mm² • Fori passanti • Profondità fino a 3 x d1

ISO Taps

Machos DIN Métrico, Entrada Corregida, VA • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

drill ø

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180

4.5

3.4

5.0

6.0

4.9

6.8

7.0

5.5

8.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

0600 0800 1000 1200 1400 1600 1800 2000 2200 2400 2700 3000

Pitch

T111

T360

T113

D0402

D0408

HSSE

Blu

TiCN

Special Relief

Form B / 4.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

Item #

T111 0600 T111 0800 T111 1000 T111 1200 T111 1400 T111 1600 T111 1800 T111 2000 T111 2200 T111 2400 T111 2700 T111 3000

• • • • • • • • • • • •

T113 0600 T113 0800 T113 1000 T113 1200 T113 1400 T113 1600 T113 1800 T113 2000 T113 2200 T113 2400 T113 2700 T113 3000

HSS Endmills Reamers 7

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

232

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

•

• • • • • •

• • • • • • • • • • • • •

•

• • • • • •

T111 T360 T113

• • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

DIN Taps Metric, Gun, VA PM Machos DIN Métrico, Entrada Corregida, VA PM • PM-HSSE V3 para un mayor rendimiento • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

• PM-HSSE V3 offers superior performance • Use in stainless steels and high strength steels • Suitable for materials up to 850N/mm² • Through holes • Depths up to 3 x d1

HSS Drills

Carbide Drills

Contents

Back to index

T118 D0408

PM-HSSE V3

Blu

TiCN

VA PM

Special Relief

Internal Coolant

Form B / 4.5 x P

6HX

6GX

6HX

drill ø

Item #

M 1.6 x 0.35 40 M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.5

2.1

1.25

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

• T114 0200 • • T114 0250 T114 0300 • T114 0400 T114 0500 T114 0600 T114 0800 T114 1000

T116 0160 T116 0200 • • T116 0250 T116 0300 T116 0350 T116 0400 T116 0500 T116 0600 T116 0800 T116 1000

• T680 0200 • • • T680 0300 • T680 0400 T680 0500 T680 0600 T680 0800 T680 1000

• • • • • • • • T118 0500 T118 0600 T118 0800 T118 1000

Pitch

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

* HSSE >20mm • Available on request as special manufacture. Subject to lead time.

• • • • • • • • •

• • •

• • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • • • • • • •

• • • • • • • • • • • • • • • •

T114 T116 T680 T118

• • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0160 0200 0220 0230 0250 0300 0350 0400 0500 0600 0800 1000

T680 D0408

Size Ref.

T116 D0408

DIN Taps

Vc Page #: 483 

T114 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi Metrici, Gun, VA PM • PM-HSSE V3 offre una prestazione superiore • Maschio per acciai inossidabili e acciai ad alta resistenza • Ideale per materiali fino a 850N/mm² • Fori passanti • Profondità fino a 3 x d1

233

Back to index Contents

DIN Taps Metric, Gun, VA PM

Carbide Drills

Machos DIN Métrico, Entrada Corregida, VA PM • PM-HSSE V3 para un mayor rendimiento • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

• PM-HSSE V3 offers superior performance • Use in stainless steels and high strength steels • Suitable for materials up to 850N/mm² • Through holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique, Gun, type VA-PM • PM-HSSE V3 pour de meilleures performances • Recommandé pour les inox et les aciers haute résistance • Convient aux matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi Metrici, Gun, VA PM • PM-HSSE V3 offre una prestazione superiore • Maschio per acciai inossidabili e acciai ad alta resistenza • Ideale per materiali fino a 850N/mm² • Fori passanti • Profondità fino a 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483 

T117

T681

T119

D0408

PM-HSSE V3

Blu

TiCN

VA PM

Special Relief

Internal Coolant

Form B / 4.5 x P

6HX

6GX

6HX

drill ø

Item #

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22* x 2.5 140 160 M 24* x 3 160 M 27* x 3 M 30* x 3.5 180

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

T115 1200 T115 1400 T115 1600 T115 1800 T115 2000 • • • •

T117 1200 T117 1400 T117 1600 T117 1800 T117 2000 • • • •

T681 1200 T681 1400 T681 1600 • T681 2000 • • • •

T119 1200 T119 1400 T119 1600 T119 1800 T119 2000 • • • •

Size Ref.

DIN Taps

Carbide Endmills

1200 1400 1600 1800 2000 2200 2400 2700 3000

T115 D0402

Pitch

HSS Endmills Reamers 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

* HSSE >20mm • Available on request as special manufacture. Subject to lead time.

• • • • • • • • •

• • •

• • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • •

T115 T117 T681 T119

• • • • • • • • • • • • • • • •

Tech Info

234

ISO VDI 3323

• Optimal • Effective

DIN Taps Metric, Gun, VA DH Machos DIN Métrico, Entrada Corregida, VA DH • Adecuado para roscado sincronizados en agujeros profundos • PM-HSSE V3 para un mayor rendimiento • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3,5 x d1

• Suitable for synchronous tapping in deep holes • PM-HSSE V3 offers superior performance • Use in stainless steels and high strength steels up to 850N/mm² • Through holes • Depths up to 3,5 x d1

HSS Drills

Tarauds DIN Métrique, Gun, type VA-DH • Adaptés au taraudage synchro dans les trous profonds • PM-HSSE V3 pour une meilleure performance • Utilisation dans les Inox et aciers alliers jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3,5 x d1

Carbide Drills

Contents

Back to index

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

12.5

8.0

6.2

6.8

10.0

8.0

8.5

Pitch

PM-HSSE V3

Blu

TiCN

VA DH

Short Pod

Form B / 4.5 x P

6HX

Item #

• • • • • T650 0300 • T650 0400 T650 0500 T650 0600 T650 0800 T650 1000

• • • • • T120 0300 • T120 0400 T120 0500 T120 0600 T120 0800 T120 1000

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • •

• • • • • • • • •

• • • •

• • • • • • • •

T650 T120

• •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

PM-HSSE V3

Size Ref.

T120 D0408

DIN Taps

Vc Page #: 483 

T650 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi Metrici, Gun, VA DH • Adatto per maschiatura sincronizzata in fori profondi • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori passanti • Profondità fino a 3,5 x d1

• Optimal • Effective

235

Back to index Contents

DIN Taps Metric, Gun, VA DH

Carbide Drills

HSS Drills

DIN Maschi Metrici, Gun, W & Cu • Ideale per materiali morbidi • CrN per rame e materiali non ferrosi • Fori passanti • Profondità fino a 3 x d1

ISO Taps

Machos DIN Métrico, Entrada Corregida, W & Cu • Adecuado para uso en materiales blandos. • CrN para cobre y materiales no ferrosos. • Agujeros pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

drill ø

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

4.5

3.4

5.0

12.5

6.0

4.9

6.8

0600 0800 1000 1200 1400 1600 1800 2000

Pitch

7.0

5.5

8.5

17.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

T651

T121

D0402

D0408

PM-HSSE V3

Blu

TiCN

VA DH

Short Pod

Form B / 4.5 x P

6HX

Item #

• • • T651 1200 • T651 1600 • T651 2000

• • • T121 1200 T121 1400 T121 1600 T121 1800 T121 2000

HSS Endmills Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

236

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • •

• • • • • • • • •

• •

• • • •

T651 T121

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Gun, NH

Carbide Drills

• Suitable for harder materials up to 42 HRC • Through holes • Depths up to 3 x d1 Tarauds DIN Métrique, Gun, type NH • Convient aux matériaux jusqu’à 42 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Gun, NH • Maschio per materiali temprati fino a 42 HRC • Fori passanti • Profondità fino a 3 x d1

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

Pitch

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

PM-HSSE V3

Blu

TiAlN

Form B / 4.5 x P

ISO 2 / 6H

Item #

• • • • • T134 0300 • T134 0400 T134 0500 T134 0600 T134 0800 T134 1000

• • • • • T140 0300 • T140 0400 T140 0500 T140 0600 T140 0800 T140 1000

• • • • • • • • • T142 0600 T142 0800 T142 1000

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• •

• • • • • • • • • • • •

• • • • • • • • •

T134 T140 T142

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T142 D0410

Size Ref.

T140 D0410

DIN Taps

Vc Page #: 483 

T134 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Entrada Corregida, NH • Uso en aceros hasta 42 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

237

Back to index Contents

DIN Taps Metric, Gun, NH

Carbide Drills

HSS Drills

DIN Maschi Metrici, Gun, NH • Maschio per materiali temprati fino a 42 HRC • Fori passanti • Profondità fino a 3 x d1 Machos DIN Métrico, Entrada Corregida, NH • Uso en aceros hasta 42 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

drill ø

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

1200 1400 1600 1800 2000 2200 2400 2700 3000

Pitch

T135

T141

T143

D0402

D0410

PM-HSSE V3

Blu

TiAlN

Form B / 4.5 x P

ISO 2 / 6H

Item #

T135 1200 T135 1400 T135 1600 T135 1800 T135 2000 • • • •

T141 1200 T141 1400 T141 1600 T141 1800 T141 2000 • • • •

T143 1200 T143 1400 T143 1600 T143 1800 T143 2000 • • • •

HSS Endmills Reamers 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

T135 T141 T143

• • • • • • • • •

Tech Info

238

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Gun, H

Carbide Drills

• Suitable for harder materials up to 45 HRC • Through holes • Depths up to 3 x d1 Tarauds DIN Métrique, Gun, type H • Convient aux matériaux jusqu’à 45 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Gun, H • Maschio per materiali temprati fino a 45 HRC • Fori passanti • Profondità fino a 3 x d1

PM-HSS Co

Blu

TiCN

Low Relief

Low Relief - IK

Form B / 4.5 x P

6HX

drill ø

Item #

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

• • • • • T144 0300 • T144 0400 T144 0500 T144 0600 T144 0800 T144 1000

• • • • • T146 0300 • T146 0400 T146 0500 T146 0600 T146 0800 T146 1000

• • • • • • • • • T148 0600 T148 0800 T148 1000

Pitch

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • • • • • • • • • • •

• • •

• •

• • • • • • • • • • • • • • • • • • • • •

• • • • • • • • •

• • •

T144 T146 T148

• • • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T148 D0408

Size Ref.

T146 D0408

DIN Taps

Vc Page #: 483 

T144 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Entrada Corregida, H • Uso en aceros hasta 45 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

239

Back to index Contents

DIN Taps Metric, Gun, H

Carbide Drills

HSS Drills

DIN Maschi Metrici, Gun, H • Maschio per materiali temprati fino a 45 HRC • Fori passanti • Profondità fino a 3 x d1 Machos DIN Métrico, Entrada Corregida, H • Uso en aceros hasta 45 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

T147

T149

D0408

PM-HSS Co

Blu

TiCN

Low Relief

Low Relief - IK

Form B / 4.5 x P

6HX

DIN Taps

Carbide Endmills

drill ø

Item #

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

T145 1200 T145 1400 T145 1600 T145 1800 T145 2000 • • • •

T147 1200 T147 1400 T147 1600 T147 1800 T147 2000 • • • •

T149 1200 T149 1400 T149 1600 T149 1800 T149 2000 • • • •

1200 1400 1600 1800 2000 2200 2400 2700 3000

T145 D0402

Pitch

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • • • • • • • • • • •

• • •

• •

• • • • • • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • •

T145 T147 T149

• • •

Tech Info

240

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R15 N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to 1.5 x d1

HSS Drills

Tarauds DIN Métrique, Hélice 15°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 1.5 x d1 DIN Maschi Metrici, Tagliente a Elica, R15 N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a 1.5 x d1

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l3

drill ø

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

Form C / 2.5 x P ISO 2 / 6H

Item # T183 0200 • • T183 0250 • T183 0300 T183 0350 T183 0400 T183 0500 T183 0600 T183 0800 T183 1000

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • •

•

• •

• • • •

T183

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

9 11

N R15

Pitch

Brt

DIN Taps

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

HSSE

Carbide Endmills

Size Ref.

T183 D0402

Tool Holding

ISO Taps

Machos DIN Métrico, Helicoidal R15, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 1.5 x d1

241

Back to index Contents

DIN Taps Metric, Spiral Flute, R15 N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to 1.5 x d1 Tarauds DIN Métrique, Hélice 15°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 1.5 x d1

HSS Drills

DIN Maschi Metrici, Tagliente a Elica, R15 N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a 1.5 x d1

ISO Taps

Machos DIN Métrico, Helicoidal R15, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 1.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

drill ø

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

1200 1400 1600 1800 2000 2200 2400 2700 3000

Pitch

T184 D0402 HSSE Brt

N R15 Form C / 2.5 x P ISO 2 / 6H

Item # T184 1200 T184 1400 T184 1600 T184 1800 T184 2000 • • • •

HSS Endmills Reamers 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • •

•

• •

T184

• • • •

Tech Info

242

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R40 N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to 2.5 x d1

HSS Drills

Tarauds DIN Métrique, Hélice 40°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1 DIN Maschi Metrici, Tagliente a Elica, R40 N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a 2.5 x d1

drill ø

5.5

2.5

2.1

0.75

5.5

2.5

2.1

0.85 0.95

5.5

2.5

2.1

2.5

2.1

1.1

2.5

2.1

1.25

2.5

2.1

1.35

2.5

2.1

1.45

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

7.0

5.5

6.0

12.5

8.0

6.2

6.8

10.0

8.0

8.5

Blu

R40

Form C / 2.5 x P

ISO 2 / 6H

Item #

T187 0100 • T187 0120 T187 0140 T187 0160 • T187 0180 T187 0200 • • T187 0250 • T187 0300 T187 0350 T187 0400 T187 0500 T187 0600 • T187 0800 T187 1000

• • • • • • • T189 0200 • • T189 0250 • T189 0300 • T189 0400 T189 0500 T189 0600 • T189 0800 T189 1000

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

• •

• • • • •

•

• • • •

• • • • • • • •

T187 T189

• •

ISO VDI 3323

Tech Info

Reamers

Pitch

HSSE

Brt

0100 0110 0120 0140 0160 0170 0180 0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0700 0800 1000

HSSE

DIN Taps

Size Ref.

T189 D0402

Carbide Endmills

Vc Page #: 482 

T187 D0402

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

• Optimal • Effective

243

Back to index Contents

DIN Taps Metric, Spiral Flute, R40 N

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to 2.5 x d1 Tarauds DIN Métrique, Hélice 40°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1

HSS Drills

DIN Maschi Metrici, Tagliente a Elica, R40 N • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a 2.5 x d1

ISO Taps

Machos DIN Métrico, Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  sq

drill ø

2.2

2.5

2.1

2.9

2.8

2.1

3.3

3.5

2.7

4.2

4.5

3.4

5.0

6.0

4.9

6.8

9.0

7.0

7.8

7.0

5.5

8.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

25.0

20.0

29.5

28.0

22.0

32.0

24.0

35.0

32.0

24.0

37.5

36.0

29.0

40.5

36.0

29.0

43.0

40.0

32.0

47.0

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

244

HSSE

Brt

Blu

R40

Form C / 2.5 x P

ISO 2 / 6H

Item #

• • T188 0400 T188 0500 T188 0600 T188 0800 • T188 1000 T188 1200 T188 1400 T188 1600 T188 1800 T188 2000 T188 2200 T188 2400 T188 2700 T188 3000 T188 3300 T188 3600 T188 3900 T188 4200 T188 4500 T188 4800 T188 5200

• • • T190 0500 T190 0600 T190 0800 • T190 1000 T190 1200 T190 1400 T190 1600 T190 1800 T190 2000 T190 2200 T190 2400 T190 2700 T190 3000 T190 3300 T190 3600 T190 3900 T190 4200 T190 4500 T190 4800 T190 5200

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • •

Tech Info

•

Reamers

• •

HSS Endmills

• • • •

Carbide Endmills

T188 T190

ISO VDI 3323

T190 D0402

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

Pitch

• • • • • • • •

DIN Taps

0300 M 3 x 0.5 56 0350 M 3.5 x 0.6 56 0400 M 4 x 0.7 63 0500 M 5 x 0.8 70 80 0600 M 6 x 1 0800 M 8 x 1.25 90 0900 M 9 x 1.25 90 1000 M 10 x 1.5 100 1200 M 12 x 1.75 110 110 1400 M 14 x 2 110 1600 M 16 x 2 1800 M 18 x 2.5 125 2000 M 20 x 2.5 140 2200 M 22 x 2.5 140 160 2400 M 24 x 3 160 M 27 x 3 2700 3000 M 30 x 3.5 180 3300 M 33 x 3.5 180 200 3600 M 36 x 4 200 3900 M 39 x 4 4200 M 42 x 4.5 200 4500 M 45 x 4.5 220 250 4800 M 48 x 5 250 5200 M 52 x 5

• •

Size Ref.

T188 D0402

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R40 N - 6G, 4H, LH

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to 2.5 x d1

HSS Drills

Tarauds DIN Métrique, Hélice 40°, type N, 6G-4H-A gauche • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1 DIN Maschi Metrici, Tagliente a Elica, R40 N - 6G, 4H, LH • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a 2.5 x d1

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

Pitch

HSSE

Brt

R40 - 6G

R40 - 4H

L40

Form C / 2.5 x P

ISO 3 / 6G

ISO 1 / 4H

ISO 2 / 6H

Item #

T191 0200 • • T191 0250 • T191 0300 • T191 0400 T191 0500 T191 0600 T191 0800 T191 1000

T193 0200 • • T193 0250 • T193 0300 • T193 0400 T193 0500 T193 0600 T193 0800 T193 1000

• • • • • T195 0300 • T195 0400 T195 0500 T195 0600 T195 0800 T195 1000

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • • • • • • • • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T191 T193 T195

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T195 D0402

Size Ref.

T193 D0402

DIN Taps

Vc Page #: 482 

T191 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Helicoidal R40, N - 6G, 4H, LH • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

245

Back to index Contents

DIN Taps Metric, Spiral Flute, R40 N - 6G, 4H, LH

Carbide Drills

• General purpose use • Suitable for materials up to 1000N/mm² • Blind holes • Depths up to 2.5 x d1 Tarauds DIN Métrique, Hélice 40°, type N, 6G-4H-A gauche • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1

HSS Drills

DIN Maschi Metrici, Tagliente a Elica, R40 N - 6G, 4H, LH • Maschio universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi • Profondità fino a 2.5 x d1

ISO Taps

Machos DIN Métrico, Helicoidal R40, N - 6G, 4H, LH • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

drill ø

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

4.5

3.4

5.0

6.0

4.9

6.8

7.0

5.5

8.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

0600 0800 1000 1200 1400 1600 1800 2000

Pitch

T192

T194

T196

D0402

HSSE

Brt

R40 - 6G

R40 - 4H

L40

Form C / 2.5 x P

ISO 3 / 6G

ISO 1 / 4H

ISO 2 / 6H

Item #

• • • T192 1200 T192 1400 T192 1600 T192 1800 T192 2000

• • • • • • • •

• • • T196 1200 T196 1400 T196 1600 T196 1800 T196 2000

HSS Endmills Reamers 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • • • • • • • • • • • •

• • •

• • • • • •

T192 T194 T196

• • • • • • • • • • • •

Tech Info

246

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R40 N, Extra Length

Carbide Drills

• For long reach applications • Suitable for materials up to 1000N/mm² • Depths up to 2.5 x d1 • d2 and sq in accordance to DIN376

HSS Drills

Tarauds DIN Métrique, Hélice 40°, type N, Extra long • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1 • Diamètre de queue et carré suivant DIN371 DIN Maschi Metrici, Tagliente a Elica, R40 N, Extra Length • Maschio per applicazioni profonde • Ideale per materiali fino a 1000N/mm² • Profondità fino a 2,5 x d1 • d2 e sq a seconda della normativa DIN376

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482 

T339 D0402 HSSE Brt

N R40 - Extra Length Form C / 2.5 x P ISO 2 / 6H

Pitch

drill ø

0300 0400 0500 0600 0800

M3 M4 M5 M6 M8

x 0.5 112 x 0.7 126 x 0.8 140 160 x1 x 1.25 180

3.5

2.7

2.5

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

T339 0300 T339 0400 T339 0500 T339 0600 T339 0800

Size Ref.

Pitch

drill ø

Item #

1000 1200 1400 1600 2000 2400

M 10 x 1.5 200 M 12 x 1.75 220 220 M 14 x 2 220 M 16 x 2 M 20 x 2.5 280 320 M 24 x 3

100

7.0

5.5

8.5

110

9.0

7.0

10.2

110

11.0

9.0

12.0

110

12.0

9.0

14.0

110

16.0

12.0

17.5

120

18.0

14.5

21.0

Item #

DIN Taps

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

• • • • • • • • • • • •

• •

• • • •

• • • • • • • •

T339 T340

Reamers Tech Info

ISO VDI 3323

T340 T340 1000 T340 1200 T340 1400 T340 1600 T340 2000 •

HSS Endmills

Carbide Endmills

Size Ref.

Tool Holding

ISO Taps

Machos DIN Métrico, Helicoidal R40, N, Extra Largo • Para aplicaciones de largo alcance • Adecuado para materiales hasta 1000N/mm² • Profundidades hasta 2,5 x d1 • d2 y sq según DIN376

• Optimal • Effective

247

Back to index Contents

DIN Taps Metric, Spiral Flute, R50 Black Magic

Carbide Drills

Machos DIN Métrico, Helicoidal R50, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Blind holes up to 3 x d1 • Suitable for synchronous tapping in machine operations

watch the video

HSS Drills

Tarauds DIN Métrique, Hélice 50°, Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

ISO Taps

DIN Maschi Metrici, Tagliente a Elica, R50 Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi fino a 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

Pitch

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

12.5

8.0

6.2

6.8

10.0

8.0

8.5

T684 D0410 PM-HSSE V3 HARDLUBE

UNI R50 Form C / 2.5 x P 6HX

Item # • • • • • T684 0300 • T684 0400 T684 0500 T684 0600 T684 0800 T684 1000

HSS Endmills Reamers 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • •

• • • •

•

• •

T684

• • • •

Tech Info

248

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

DIN Taps Metric, Spiral Flute, R50 Black Magic Machos DIN Métrico, Helicoidal R50, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

HSS Drills

Carbide Drills

Contents

Back to index

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l3

drill ø

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

UNI R50 Form C / 2.5 x P 6HX

Item #

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • •

• • • •

• •

• • • •

T685

•

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

T685 1200 T685 1400 T685 1600 T685 1800 T685 2000 • • • •

l2 17.5

Pitch

HARDLUBE

DIN Taps

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180

1200 1400 1600 1800 2000 2200 2400 2700 3000

PM-HSSE V3

Carbide Endmills

Size Ref.

T685 D0410

Tool Holding

ISO Taps

249

Back to index Contents

DIN Taps Metric, Spiral Flute, R45 Al

Carbide Drills

Machos DIN Métrico, Helicoidal R45, Al • Adecuado para su uso en aluminio forjado y aluminio con bajo contenido de silicio. • agujeros ciegos • Profundidades de hasta 3 x d1 • CrN para una mayor vida útil de la herramienta

• Suitable for use in wrought aluminium and low silicon aluminium • Blind holes • Depths up to 3 x d1 • CrN for longer tool life Tarauds DIN Métrique, Hélice 45°, coupe aluminium • Convient au aluminiums forgés et faiblement chragés en silice • Trous borgnes • Profondeur jusqu’à 3 x d1 • CrN pour une meilleure durée de vie

HSS Drills

DIN Maschi Metrici, Tagliente a Elica, R45 Al • Ideale per Fusione di alluminio e allumino con bassa presenza di silicio • Fori ciechi • Profondità fino a 3 x d1 • CrN per ottimizzare vita utensile

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

12.5

8.0

6.2

6.8

10.0

8.0

8.5

0200 0200 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

Pitch

T231

T233

D0402

D0404

HSSE

Brt

CrN

R45 2 Flute

Form C / 2.5 x P

ISO 2 / 6H

Item #

T231 0200 • • T231 0250 • T231 0300 T231 0350 T231 0400 T231 0500 T231 0600 T231 0800 T231 1000

• • • • • T233 0300 • T233 0400 T233 0500 T233 0600 T233 0800 T233 1000

HSS Endmills Reamers 3

M 8

T231 T233 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

250

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R45 Al

HSS Drills

Tarauds DIN Métrique, Hélice 45°, coupe aluminium • Convient au aluminiums forgés et faiblement chragés en silice • Trous borgnes • Profondeur jusqu’à 3 x d1 • CrN pour une meilleure durée de vie

Carbide Drills

• Suitable for use in wrought aluminium and low silicon aluminium • Blind holes • Depths up to 3 x d1 • CrN for longer tool life

drill ø

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

4.5

3.4

5.0

12.5

6.0

4.9

6.8

Pitch

7.0

5.5

8.5

17.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

HSSE

Brt

CrN

R45 2 Flute

Form C / 2.5 x P

ISO 2 / 6H

Item #

T232 1400 T232 1600 T232 1800 T232 2000

• • • T234 1200 T234 1400 T234 1600 T234 1800 T234 2000

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

T232 T234 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

* Not available once current stock is depleted • Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0600 0800 1000 1200 1400 1600 1800 2000

D0404

Size Ref.

T234

D0402

DIN Taps

Vc Page #: 482 

T232*

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

• Optimal • Effective

251

Back to index

Tarauds DIN Métrique, Hélice 45°, type W & Cu • Convient aux matériaux tendres • CrN pour les cuivres et non-ferreux • Trous borgnes • Profondeur jusqu’à 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482 

HSS Endmills Reamers

0600 0800 1000 1200 1400 1600 1800 2000

Tech Info

T235 / T236 T237 / T238 T241 / T242 T239 / T240

HSSE

Blu

TiN

CrN

R45

Form C / 2.5 x P

ISO 2 / 6H

Item #

drill ø

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

8 9 9 9 9 5 6 7 8 10 12.5 15

18 20 21 25 30 35 39

2.8 2.8 2.8 2.8 2.8 3.5 4.0 4.5 6.0 6.0 8.0 10.0

2.1 2.1 2.1 2.1 2.1 2.7 3.0 3.4 4.9 4.9 6.2 8.0

5 5 5 5 5 6 6 6 8 8 9 11

2 2 2 2 2 3 3 3 3 3 3 3

1.6 1.75 1.9 2.05 2.15 2.5 2.9 3.3 4.2 5.0 6.8 8.5

T235 0200 • • T235 0250 • T235 0300 T235 0350 T235 0400 T235 0500 T235 0600 T235 0800 T235 1000

• • • • • T237 0300 • T237 0400 T237 0500 T237 0600 T237 0800 T237 1000

• • • • • T241 0300 T241 0350 T241 0400 T241 0500 T241 0600 T241 0800 T241 1000

• • • • • T239 0300 • T239 0400 T239 0500 T239 0600 T239 0800 T239 1000

drill ø

Item #

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

10 12.5 15 17.5 20 20 25 25

4.5 6.0 7.0 9.0 11.0 12.0 14.0 16.0

3.4 4.9 5.5 7.0 9.0 9.0 11.0 12.0

6 8 8 10 12 12 14 15

3 3 3 3 3 4 4 4

5.0 6.8 8.5 10.2 12.0 14.0 15.5 17.5

T236 T236 0600 T236 0800 T236 1000 T236 1200 T236 1400 T236 1600 T236 1800 T236 2000

T238 • • • T238 1200 T238 1400 T238 1600 T238 1800 T238 2000

T242 T242 0600 T242 0800 T242 1000 T242 1200 T242 1400 T242 1600 T242 1800 T242 2000

T240 T240 0600 • • T240 1200 T240 1400 T240 1600 T240 1800 T240 2000

Pitch

DIN376

P 1

HSSE

ISO VDI 3323

T239 D0404

Pitch

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • •

Carbide Endmills

Size Ref.

T241 D0406

DIN371

• • • • • • • • • • • •

DIN Taps

252

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T237 D0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • •

Size Ref.

T235 D0402

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

ISO Taps

Machos DIN Métrico, Helicoidal R45, W y Cu • Adecuado para uso en materiales blandos. • CrN para cobre y materiales no ferrosos. • Agujeros ciegos • Profundidades hasta 3 x d1

• •

HSS Drills

DIN Maschi Metrici, Tagliente a Elica, R45 W & Cu • Ideale per materiali morbidi • CrN per rame e materiali non ferrosi • Fori ciechi • Profondità fino a 3 x d1

•

Carbide Drills

• Suitable for use in soft materials • CrN for copper and non-ferrous materials • Blind holes • Depths up to 3 x d1

• •

Contents

DIN Taps Metric, Spiral Flute, R45 W & Cu

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R45 VA DH

Carbide Drills

• Suitable for controlled tapping in deep holes • Use in stainless steels and high strength steels up to 850N/mm² • Blind holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique, Hélice 45°, type VA-DH • Convient aux taraudages controlés • Recommandés pour les inox et matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi Metrici, Tagliente a Elica, R45 VA DH • Ideale per una maschiatura profonda controllata • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi • Profondità fino a 3 x d1

drill ø

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

12.5

8.0

6.2

6.8

10.0

8.0

8.5

HSSE

Blu

TiCN

VA DH

R45 Back Chamf.

Form C / 2.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

Item #

• • • • • T197 0300 • T197 0400 T197 0500 T197 0600 T197 0800 T197 1000

• • • • • • • • • • • •

• • • • • T201 0300 • T201 0400 T201 0500 T201 0600 T201 0800 T201 1000

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

• • • •

• • • • • • • • •

• • •

• • • • • • •

• • • • • • • • • •

T197 T198 T201

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

R45 Back Chamf. Form C / 2.5 x P

Tool Holding

T201 D0408

Pitch

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

T198 D0402

DIN Taps

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T197 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

ISO Taps

Machos DIN Métrico, Helicoidal R45, VA DH • Adecuado para roscado sincronizados en agujeros profundos • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos • Profundidades hasta 3 x d1

• Optimal • Effective

253

Back to index Contents

DIN Taps Metric, Spiral Flute, R45 VA DH

Carbide Drills

• Suitable for controlled tapping in deep holes • Use in stainless steels and high strength steels up to 850N/mm² • Blind holes • Depths up to 3 x d1 Tarauds DIN Métrique, Hélice 45°, type VA-DH • Convient aux taraudages controlés • Recommandés pour les inox et matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Tagliente a Elica, R45 VA DH • Ideale per una maschiatura profonda controllata • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi • Profondità fino a 3 x d1

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

T200

T202

D0402

D0408

HSSE

Blu

TiCN

VA DH

R45 Back Chamf.

Form C / 2.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

DIN Taps

Carbide Endmills

drill ø

Item #

80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100 M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22 x 2.5 140 160 M 24 x 3 160 M 27 x 3 M 30 x 3.5 180 200 M 36 x 4 M 42 x 4.5 200

4.5

3.4

5.0

T199 0600

• • • • • • • • • • • • • •

T202 0600

0600 0800 1000 1200 1400 1600 1800 2000 2200 2400 2700 3000 3600 4200

T199 D0402

Pitch

12.5

6.0

4.9

6.8

T199 0800

7.0

5.5

8.5

T199 1000

17.5

9.0

7.0

10.2

T199 1200

11.0

9.0

12.0

T199 1400

12.0

9.0

14.0

T199 1600

14.0

11.0

15.5

T199 1800

16.0

12.0

17.5

T199 2000

18.0

14.5

19.5

T199 2200

18.0

14.5

21.0

T199 2400

20.0

16.0

24.0

T199 2700

22.0

18.0

26.5

T199 3000

28.0

22.0

32.0

T199 3600

32.0

24.0

37.5

T199 4200

T202 0800 T202 1000 T202 1200 T202 1400 T202 1600 T202 1800 T202 2000 T202 2200 T202 2400 T202 2700 T202 3000 T202 3600

•

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

254

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

• • • •

• • • • • • • • •

• • •

•

• • • • • • •

T199 T200 T202

• • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

DIN Taps Metric, Spiral Flute, R50 VA PM Machos DIN Métrico, Helicoidal R50, VA PM • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros ciegos profundos • Profundidad hasta 3 x d1

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Deep blind holes • Depths up to 3 x d1

HSS Drills

Carbide Drills

Contents

Back to index

PM-HSSE V3

TiCN

VA PM

R50

Form C / 2.5 x P

Form E / 1.5 x P

6HX

6GX

6HX

drill ø

Item #

M 1.6 x 0.35 40 M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.5

2.1

1.25

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

12.5

8.0

6.2

6.8

10.0

8.0

8.5

T205 0160 T205 0200 • • T205 0250 T205 0300 T205 0350 T205 0400 T205 0500 T205 0600 T205 0800 T205 1000

• • • • • T678 0300 • T678 0400 T678 0500 T678 0600 T678 0800 T678 1000

• • • • • T676 0300 • T676 0400 T676 0500 T676 0600 T676 0800 T676 1000

Pitch

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

* HSSE >20mm • Available on request as special manufacture. Subject to lead time.

• • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • •

• • • • • • • • • • • •

• • • • • • • • •

• • •

• • • • • • • • •

• • • • • • • • • • • •

T205 T678 T676

• • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0160 0200 0220 0230 0250 0300 0350 0400 0500 0600 0800 1000

T676 D0408

Size Ref.

T678 D0408

DIN Taps

Vc Page #: 482 

T205 D0408

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi Metrici, Tagliente a Elica, R50 VA PM • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi • Profondità fino a 3 x d1

• Optimal • Effective

255

Back to index Contents

DIN Taps Metric, Spiral Flute, R50 VA PM

Carbide Drills

Machos DIN Métrico, Helicoidal R50, VA PM • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros ciegos profundos • Profundidad hasta 3 x d1

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Deep blind holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique, Hélice 50°, type VA-PM • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Recommandé pour les inox et aciers alliés jusquà 850N/mm² • Trous borgnes profonds • Profondeur jusqu’à 3 x d1 DIN Maschi Metrici, Tagliente a Elica, R50 VA PM • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi • Profondità fino a 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

1200 1400 1600 1800 2000 2200 2400 2700 3000

Pitch

T679

T677

D0408

PM-HSSE V3

TiCN

VA PM

R50

Form C / 2.5 x P

Form E / 1.5 x P

6HX

6GX

6HX

drill ø

Item #

17.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

T206 1200 T206 1400 T206 1600 T206 1800 T206 2000 T206 2200 T206 2400 T206 2700 T206 3000

T679 1200 • T679 1600 • T679 2000 T679 2200 T679 2400 • •

T677 1200 T677 1400 T677 1600 • T677 2000 T677 2200 T677 2400 • •

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22† x 2.5 140 160 M 24† x 3 160 M 27† x 3 M 30† x 3.5 180

T206 D0408

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

256

S Titanium & Super Alloys H Hard Materials

† HSSE >20mm * Not available once current stock is depleted • Available on request as special manufacture. Subject to lead time.

• • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • •

• • • • • • • • • • • •

• • • • • • • • •

• • •

• • • • • • • • •

T206 T679 T677

• • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

DIN Taps Metric, Spiral Flute, R50 VA PM, IK Machos DIN Métrico, Helicoidal R50, VA PM, IK • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros ciegos profundos • Profundidad hasta 3 x d1

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Deep blind holes • Depths up to 3 x d1

HSS Drills

Carbide Drills

Contents

Back to index

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l2

drill ø

6.0

4.9

4.2 5.0

6.0

4.9

12.5

8.0

6.2

6.8

10.0

8.0

8.5

R50 IK Form C / 2.5 x P 6HX

Item # T207 0500 T207 0600 T207 0800 T207 1000

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

* HSSE >20mm • Available on request as special manufacture. Subject to lead time.

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

• • • •

• • •

•

• • •

• • • •

T207

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Carbide Endmills

Pitch

TiCN

VA PM

M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

0500 0600 0800 1000

PM-HSSE V3

DIN Taps

Size Ref.

T207 D0408

Tool Holding

ISO Taps

DIN Maschi Metrici, Tagliente a Elica, R50 VA PM, IK • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi • Profondità fino a 3 x d1

257

Back to index Contents

DIN Taps Metric, Spiral Flute, R50 VA PM, IK

Carbide Drills

Machos DIN Métrico, Helicoidal R50, VA PM, IK • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros ciegos profundos • Profundidad hasta 3 x d1

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Deep blind holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique, Hélice 50°, type VA-PM-IK • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Recommandé pour les inox et aciers alliés jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi Metrici, Tagliente a Elica, R50 VA PM, IK • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi • Profondità fino a 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

1200 1400 1600 1800 2000 2200 2400 2700 3000

Pitch

drill ø

17.5

9.0

7.0

10.2

11.0

9.0

12.0

9.0

14.0

11.0

15.5

16.0

12.0

17.5

18.0

14.5

19.5

18.0

14.5

21.0

20.0

16.0

24.0

22.0

18.0

26.5

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140 M 22* x 2.5 140 160 M 24* x 3 160 M 27* x 3 M 30* x 3.5 180

T208 D0408 PM-HSSE V3 TiCN

VA PM R50 IK Form C / 2.5 x P 6HX

Item # T208 1200 T208 1400 T208 1600 T208 1800 T208 2000 • • • •

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

* HSSE >20mm • Available on request as special manufacture. Subject to lead time.

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

• • • •

• • •

•

• • •

T208

• • • •

Tech Info

258

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R40 NH

Carbide Drills

• Suitable for harder short chipping materials up to 42 HRC • Blind holes • Depths up to 2.5 x d1 Tarauds DIN Métrique, Hélice 40°, type NH • Convient aux matériaux à copeaux courts jusqu’à 42 HRC • Trous borgnes • Profondeur jusqu’à 2.5 x d1

HSS Drills

DIN Maschi metrici, Tagliente a Elica, R40 NH • Maschio per materiali a truciolo corto temprati a 42 HRC • Fori Ciechi • Profondità fino a 2,5 x d1

drill ø

45 M 2 x 0.4 M 2.2 x 0.45 45 45 M 2.3 x 0.4 M 2.5 x 0.45 50 M 2.6 x 0.45 50 56 M 3 x 0.5 56 M 3.5 x 0.6 63 M 4 x 0.7 70 M 5 x 0.8 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.6

2.8

2.1

1.75

2.8

2.1

1.9

2.8

2.1

2.05

2.8

2.1

2.15

3.5

2.7

2.5

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

Pitch

12.5

8.0

6.2

6.8

10.0

8.0

8.5

PM-HSSE V3

Blu

TiAlN

R40

R40 IK

Form C / 2.5 x P

ISO 2 / 6H

Item #

• • • • • T221 0300 • T221 0400 T221 0500 T221 0600 T221 0800 T221 1000

• • • • • T227 0300 • T227 0400 T227 0500 T227 0600 T227 0800 T227 1000

T229 0500 T229 0600 T229 0800 T229 1000

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•••

••• ••• •••

T221 T227 T229

••• ••• •• ••• •• ••• •• ••• ••• ••• ••• ••• ••• ••• ••• ••• •• •• •• •• •• •• •• ••

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T229 D0410

Size Ref.

T227 D0410

DIN Taps

Vc Page #: 482 

T221 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Helicoidal R40, NH • Uso en aceros de viruta corta, hasta 42 HRC • Agujeros ciegos • Profundidades de hasta 2,5 x d1

• Optimal • Effective

259

Back to index Contents

DIN Taps Metric, Spiral Flute, R40 NH

Carbide Drills

HSS Drills

DIN Maschi metrici, Tagliente a Elica, R40 NH • Maschio per materiali a truciolo corto temprati a 42 HRC • Fori Ciechi • Profondità fino a 2,5 x d1 Machos DIN Métrico, Helicoidal R40, NH • Uso en aceros de viruta corta, hasta 42 HRC • Agujeros ciegos • Profundidades de hasta 2,5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

Pitch

drill ø

M 12 x 1.75 M 14 x 2 M 16 x 2 M 18 x 2.5 M 20 x 2.5 M 22 x 2.5 M 24 x 3 M 27 x 3 M 30 x 3.5

110

17.5

9.0

7.0

10.2

110

11.0

9.0

12.0

110

12.0

9.0

14.0

125

14.0

11.0

15.5

140

16.0

12.0

17.5

140

18.0

14.5

19.5

160

18.0

14.5

21.0

160

20.0

16.0

24.0

180

22.0

18.0

26.5

1200 1400 1600 1800 2000 2200 2400 2700 3000

T222

T228

T230

D0402

D0410

PM-HSSE V3

Blu

TiAlN

R40

R40 IK

Form C / 2.5 x P

ISO 2 / 6H

Item #

T222 1200 T222 1400 T222 1600 T222 1800 T222 2000 • • • •

T228 1200 T228 1400 T228 1600 T228 1800 T228 2000 • • • •

T230 1200 T230 1400 T230 1600 T230 1800 T230 2000 • • • •

HSS Endmills Reamers 3

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

260

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•••

T222 T228 T230

••• ••• •••

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, R15 H

Carbide Drills

• Suitable for harder materials up to 45 HRC • Blind holes • Depths up to 1.5 x d1 Tarauds DIN Métrique, Hélice 15°, H • Convient aux matériaux jusqu’à 45 HRC • Trous borgnes • Profondeur jusqu’à 1.5 x d1

HSS Drills

DIN Maschi metrici, Tagliente a Elica, R15 H • Maschio per materiali temprati fino a 45 HRC • Fori ciechi • Profondità fino a 1,5 x d1

drill ø

4.0

3.0

2.9

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

PM-HSS Co

TiCN

R15

R15 IK

Form C / 3 x P

ISO 2 / 6HX

Item #

• T211 0400 T211 0500 T211 0600 T211 0800 T211 1000

T213 0500 T213 0600 T213 0800 T213 1000

PM-HSS Co

Blu

DIN Taps

Pitch

PM-HSS Co

0350 M 3.5 x 0.6 0400 M 4 x 0.7 0500 M 5 x 0.8 0600 M 6 x 1 0800 M 8 x 1.25 1000 M 10 x 1.5

12.5

8.0

6.2

6.8

100

10.0

8.0

8.5

• T209 0400 T209 0500 T209 0600 T209 0800 T209 1000

Size Ref.

drill ø

Item #

110

17.5

9.0

7.0

10.2

110

11.0

9.0

12.0

110

12.0

9.0

14.0

125

14.0

11.0

15.5

140

16.0

12.0

17.5

140

18.0

14.5

19.5

160

18.0

14.5

21.0

160

20.0

16.0

24.0

180

22.0

18.0

26.5

T210 T210 1200 T210 1400 T210 1600 T210 1800 T210 2000 • • • •

T212 T212 1200 T212 1400 T212 1600 T212 1800 T212 2000 • • • •

T214 T214 1200 T214 1400 T214 1600 T214 1800 T214 2000 • • • •

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • • • • • • • • • • •

• • •

T209 / T210 T211 / T212 T213 / T214

• • • • • • • •

ISO VDI 3323

• •

M 12 x 1.75 M 14 x 2 M 16 x 2 M 18 x 2.5 M 20 x 2.5 M 22 x 2.5 M 24 x 3 M 27 x 3 M 30 x 3.5

• • • • • • • • • • • • • • • • • • • • •

Pitch

• • • • • •

1200 1400 1600 1800 2000 2200 2400 2700 3000

DIN 376

• Optimal • Effective

Carbide Endmills

DIN 371

T213 D0408

HSS Endmills

Size Ref.

T211 D0408

Reamers

Vc Page #: 483 

T209 D0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Helicoidal R15, H • Uso en aceros de viruta corta, hasta 45 HRC • Agujeros ciegos • Profundidades de hasta 1,5 x d1

261

Back to index Contents

DIN Taps Metric, Spiral Flute, R15 Ti

Carbide Drills

Machos DIN Métrico, Helicoidal R15, Ti • Para aleaciones con base de titanio • Geometría de corte única para una extración de virutas altamente eficiente • Optimizado para micro-acabado una confiabilidad óptima del proceso y una excelente calidad de rosca • Agujeros ciegos hasta 1.5 x d1

• For Titanium based alloys • Unique cutting geometry for highly efficient swarf ejection • Optimised microfinish for optimal process reliability and excellent thread quality • Blind holes up to approx. 1.5 x d1

HSS Drills

Tarauds DIN Métrique, Hélice 15°, type Ti • Recommandé pour les bases Titanes • Géométrie de coupe unique pour une bonne évacuation copeaux • Microfinition optimisée pour une fiabilité de processus optimale et une excellente qualité de filetage • Trous borgnes jusqu’à 1.5 x d1 DIN Maschi metrici, Tagliente a Elica, R15 Ti • Per leghe a base di Titanio • Unica geometria di del tagliente per un efficiente evaquazione truciolo • Processo di micro finitura del tagliente ottimazzata per ottenere un risultato di eccellente qualità • Fori ciechi fino a circa 1,5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  l1

drill ø

0300 0400 0500 0600 0800 1000

56 M 3 x 0.5 63 M 4 x 0.7 70 M 5 x 0.8 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

3.5

2.7

2.5

4.5

3.4

3.3

1200 1400 1600 1800 2000

M 12 x 1.75 M 14 x 2 M 16 x 2 M 18 x 2.5 M 20 x 2.5

Size Ref.

DIN Taps

M/MJ

Pitch

DIN 371

Carbide Endmills

6.0

4.9

4.2

6.0

4.9

5.0

12.5

8.0

6.2

6.8

10.0

8.0

8.5

110

17.5

9.0

7.0

10.2

110

11.0

9.0

12.0

110

12.0

9.0

14.0

125

14.0

11.0

15.5

140

16.0

12.0

17.5

DIN 376

T215

T788

D0408

PM-HSS Co

TiCN

R15

Form C / 3 x P

6HX

MJ–4HX

Item #

T215 0300 T215 0400 T215 0500 T215 0600 T215 0800 T215 1000

• • • • • •

T216 T216 1200 T216 1400 T216 1600 T216 1800 T216 2000

T789 • • • • •

HSS Endmills Reamers 3

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

262

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time & MOQ.

• • • • • • • • • •

• •

T215 / T216 T788 / T789

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Spiral Flute, L12 Ti

HSS Drills

Tarauds DIN Métrique, Hélice à gauche 12°, type Ti • Recommandé pour les bases Titanes • Géométrie de coupe unique pour une bonne évacuation copeaux • Microfinition optimisée pour une fiabilité de processus optimale et une excellente qualité de filetage • Trous débouchants jusqu’à 1.5 x d1

Carbide Drills

Machos DIN Métrico, Helicoidal, L12 Ti • Para aleaciones con base de titanio • Geometría de corte única para una extración de virutas altamente eficiente • Optimizado para micro-acabado una confiabilidad óptima del proceso y una excelente calidad de rosca • Agujeros ciegos hasta 1.5 x d1

0300 0400 0500 0600 0800 1000

drill ø

56 M 3 x 0.5 63 M 4 x 0.7 70 M 5 x 0.8 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

3.5

2.7

2.5

4.5

3.4

3.3

6.0

4.9

4.2

6.0

4.9

5.0

8.0

6.2

6.8

10.0

8.0

8.5

110

9.0

7.0

10.2

110

11.0

9.0

12.0

110

12.0

9.0

14.0

125

14.0

11.0

15.5

140

16.0

12.0

17.5

Pitch

DIN 371

DIN 376

1200 1400 1600 1800 2000

PM-HSS Co

TiCN

L12

Form B / 4.5 x P

6HX

MJ–4HX

Item #

T152 0300 T152 0400 T152 0500 T152 0600 T152 0800 T152 1000

• • • • • •

T153 T153 1200 T153 1400 T153 1600 T153 1800 T153 2000

T785 • • • • •

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time & MOQ.

• • • • •

•

T152 / T153 T784 / T785

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

M 12 x 1.75 M 14 x 2 M 16 x 2 M 18 x 2.5 M 20 x 2.5

PM-HSS Co

DIN Taps

Size Ref.

T784 D0408

M/MJ

Vc Page #: 483 

T152 D0408

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi metrici, Tagliente a Elica, L12 Ti • Per leghe a base di Titanio • Unica geometria di del tagliente per un efficiente evaquazione truciolo • Processo di micro finitura del tagliente ottimazzata per ottenere un risultato di eccellente qualità • Fori ciechi fino a circa 1,5 x d1

• Optimal • Effective

263

Back to index Contents

DIN Taps Metric, Spiral Flute, R10 Ni

Carbide Drills

• For Nickel alloys / age-hardened super alloys >1150N/mm² • Reinforced cutting geometry • Blind or through holes • Depths up to approx. 1.5 x d1 Tarauds DIN Métrique, Hélice 10°, type Ni • Recommandé pour les bases Nickel >1150N/mm² • Géométrie de coupe renforcée • Trous borgnes et débouchants • Profondeur jusqu’à 1.5 x d1

264

HSS Drills

DIN Maschi metrici, Tagliente a Elica, R10 Ni • Ideale per leghe Nickel / Super leghe invecchiate >1150/mm² • Geometria del tagliente rinforzata • Fori ciechi & passanti • Profondità fino a circa 1,5 x d1

ISO Taps

Machos DIN Métrico, Helicoidal R10, Ni • Para aleaciones de níquel y súper aleaciones endurecidas >1150N/mm² • Geometría de corte reforzada • Agujeros ciegos o pasantes • Profundidades hasta 1.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

M/MJ

Pitch

Carbide Endmills

0300 0400 0500 0600 0800 1000

56 M 3 x 0.5 63 M 4 x 0.7 70 M 5 x 0.8 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

3.5

2.7

4.5

3.4

6.0

4.9

6.0

4.9

8.0

6.2

10.0

8.0

1200 1400 1600 2000

M 12 x 1.75 M 14 x 2 M 16 x 2 M 20 x 2.5

110

9.0

7.0

110

11.0

9.0

110

12.0

9.0

140

16.0

12.0

DIN 371

drill ø

†

DIN 376

T217

T792

D0408

PM-HSS Co

TiCN

R10

Form C / 3 x P

6HX

MJ–4HX

Item #

T217 0300 T217 0400 T217 0500 T217 0600 T217 0800 T217 1000

• • • • • •

T218 T218 1200 T218 1400 T218 1600 T218 2000

T793 • • • •

HSS Endmills Reamers 1

M 8

T217 / T218 T792 / T793 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

264

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time & MOQ.

• Optimal • Effective

Special Taps Service Understanding the difficulties with producing threads in super alloys. Our Special Tap Service enables us to meet your requirements and deliver superior performance & process stability in Titanium & high temperature alloys. With our vast experience & state of the art CNC grinding equipment almost any profile can be achieved. Feel free to discuss these with our Tech team. All Thread Forms M, MJ, UNJC, UNJF, Screw Thread Insert (STI) Sizes M2-M30, #2-1"

Industries: • Oil & Gas • Aerospace • Automotive • Medical

Back to index Contents

DIN Taps Metric, Forming, No Groove

Carbide Drills

• Suitable for materials with >10% elongation • Through or blind holes • Depths up to 3 x d1

HSS Drills

DIN Maschi metrici, Rullare, Senza Scarichi • Ideale per materiali con >10% di allungamento • Fori ciechi & passanti • Profondità fino a 3 x d1

Tarauds DIN Métrique par déformation, sans rainure de lubrification • Convient aux matériaux avec une élasticité de mini >10% • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1

Machos DIN Métrico, Laminación, sin ranuras de refrigeración • Adecuado para materiales con >10% de elongación • Agujeros pasantes o ciegos • Profundidades hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 485  Size Ref.

DIN Taps

Carbide Endmills HSS Endmills

0100 0120 0140 0160 0170 0180 0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

Pitch

T309

T313

T311

T315

D0402

D0406

D0402

D0406

HSSE

Brt

TiN

Brt

TiN

No Groove

Form C / 2.5 x P

Form D / 4 x P

6HX

drill ø

Item #

0.9

T309 0100 T309 0120 T309 0140 T309 0160 T309 0170 T309 0180 T309 0200 T309 0220 T309 0230 T309 0250 T309 0260 T309 0300 T309 0350 T309 0400 T309 0500 T309 0600 T309 0800 T309 1000

T313 0100 T313 0120 T313 0140 T313 0160 T313 0170 T313 0180 T313 0200 T313 0220 T313 0230 T313 0250 T313 0260 T313 0300 T313 0350 T313 0400 T313 0500 T313 0600 T313 0800 T313 1000

T311 0100 T311 0120 T311 0140 T311 0160 T311 0170 T311 0180 T311 0200 T311 0220 T311 0230 T311 0250 T311 0260 T311 0300 T311 0350 T311 0400 T311 0500 T311 0600 T311 0800 T311 1000

T315 0100 T315 0120 T315 0140 T315 0160 T315 0170 T315 0180 • • • • T315 0260 T315 0300 T315 0350 T315 0400 T315 0500 T315 0600 T315 0800 T315 1000

M 1 x 0.25 40 M 1.2 x 0.25 40 40 M 1.4 x 0.3 M 1.6 x 0.35 40 M 1.7 x 0.35 40 M 1.8 x 0.35 40 45 M 2 x 0.4 M 2.2 x 0.45 45 45 M 2.3 x 0.4 M 2.5 x 0.45 50 M 2.6 x 0.45 50 56 M 3 x 0.5 56 M 3.5 x 0.6 63 M 4 x 0.7 70 M 5 x 0.8 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.5

2.1

2.5

2.1

1.1

2.5

2.1

1.28

2.5

2.1

1.45

2.5

2.1

1.55

2.5

2.1

1.65

2.8

2.1

1.8

2.8

2.1

2.0

2.8

2.1

2.8

2.1

2.3

2.8

2.1

2.4

3.5

2.7

2.8

4.0

3.0

3.2

4.5

3.4

3.7

6.0

4.9

4.6

6.0

4.9

5.5

8.0

6.2

7.4

10.0

8.0

9.3

Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • • • •

•

T309 T313 T311 T315

• • • • • • • • • • • •

Tech Info

266

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Forming, Multi Coolant Groove

Carbide Drills

• Suitable for materials with >10% elongation • Through or blind holes • Depths up to 3 x d1 Tarauds DIN Métrique par déformation, avec rainures de lubrification • Convient aux matériaux avec une élasticité de mini >10% • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi metrici, Rullare, Multi Scarichi refrigerazione • Ideale per materiali con >10% di allungamento • Fori ciechi & passanti • Profondità fino a 3 x d1

T329 D0404

HSSE

TiCN

CrN

Multi Coolant Groove

Single-Coolant Groove

Form C / 2.5 x P

Form D / 4 x P

Form C / 2.5 x P

6HX

6GX

6HX

drill ø

Item #

M 1 x 0.25 40 M 1.4 x 0.3 40 M 1.6 x 0.35 40 M 2 x 0.4 45 M 2.5 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.5

2.1

0.9

2.5

2.1

1.28

2.5

2.1

1.45

2.8

2.1

1.8

2.8

2.1

2.3

3.5

2.7

2.8

4.0

3.0

3.2

4.5

3.4

3.7

6.0

4.9

4.6

6.0

4.9

5.5

8.0

6.2

7.4

10.0

8.0

9.3

T319 0100 T319 0140 T319 0160 T319 0200 T319 0250 T319 0300 T319 0350 T319 0400 T319 0500 T319 0600 T319 0800 T319 1000

• • • • • T321 0300 T321 0350 T321 0400 T321 0500 T321 0600 T321 0800 T321 1000

• • • • • T323 0300 • T323 0400 T323 0500 T323 0600 T323 0800 T323 1000

• • • • • T329 0300 T329 0350 T329 0400 T329 0500 T329 0600 T329 0800 T329 1000

Pitch

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

†

Made to ~DIN 376 standard.

• • • •

• • • • • • • • • • • • • • • •

• • •

• • • • • • • • • • • •

T319 T321 T323 T329

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0100* 0140 0160* 0200 0250 0300 0350 0400 0500 0600 0800 1000

T323 D0408

Size Ref.

T321 D0408

DIN Taps

Vc Page #: 485 

T319 D0408

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico, Laminación, con ranuras de refrigeración • Adecuado para materiales con >10% de elongación • Agujeros pasantes o ciegos • Profundidades hasta 3 x d1

267

Back to index Contents

DIN Taps Metric, Forming, Multi Coolant Groove

Carbide Drills

• Suitable for materials with >10% elongation • Through or blind holes • Depths up to 3 x d1

HSS Drills

DIN Maschi metrici, Rullare, Multi Scarichi refrigerazione • Ideale per materiali con >10% di allungamento • Fori ciechi & passanti • Profondità fino a 3 x d1

Tarauds DIN Métrique par déformation, avec rainures de lubrification • Convient aux matériaux avec une élasticité de mini >10% • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1

Machos DIN Métrico, Laminación, con ranuras de refrigeración • Adecuado para materiales con >10% de elongación • Agujeros pasantes o ciegos • Profundidades hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 485  Size Ref.

DIN Taps

Pitch

Carbide Endmills

80 0600 M 6† x 1 0800 M 8† x 1.25 90 1000 M 10† x 1.5 100 1200 M 12 x 1.75 110 110 1400 M 14 x 2 110 1600 M 16 x 2 1800 M 18 x 2.5 125 2000 M 20 x 2.5 140

T320

T322

T324

T330

D0408

D0404

HSSE

TiCN

CrN

Multi Coolant Groove

Single-Coolant Groove

Form C / 2.5 x P

Form D / 4 x P

Form C / 2.5 x P

6HX

6GX

6HX

drill ø

Item #

4.5

3.4

5.5

6.0

4.9

7.4

7.0

5.5

9.3

9.0

7.0

11.2

11.0

9.0

13.1

12.0

9.0

15.1

14.0

11.0

16.9

16.0

12.0

18.9

T320 0600 T320 0800 T320 1000 T320 1200 T320 1400 T320 1600 • T320 2000

• • • T322 1200 T322 1400 T322 1600 • •

• • • T324 1200 • T324 1600 • T324 2000

• • • T330 1200 • • • •

HSS Endmills Reamers 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

†

Made to ~DIN 376 standard.

• • • •

• • • • • • • • • • • • • • • •

• • •

T320 T322 T324 T330

• • • • • • • • • • • •

Tech Info

268

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Forming, UNI

Carbide Drills

Machos DIN Métrico, Laminación, UNI • SPM para un rendimiento superior • Adecuado para materiales con >10% de elongación • Geometría específica de aplicación • Agujeros pasantes o ciegos • Profundidades de hasta 3 x d1

• SPM for superior performance • Application specific geometry • Suitable for materials with >10% elongation • Through or blind holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique par déformation, avec rainures de lubrification type UNI • SPM pour une meilleure performance • Géométrie spéciale • Convient aux matériaux avec une élasticité mini >10% • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1

SPM

TiAlN

UNI

Multi-Coolant Groove

Form C / 2.5 x P

Form E / 1.5 x P

Form C / 2.5 x P

6HX

Item #

drill ø

Item #

M 2 x 0.4 45 M 2.2 x 0.45 45 M 2.3 x 0.4 45 M 2.5 x 0.45 50 M 2.6 x 0.45 50 M 3 x 0.5 56 M 3.5 x 0.6 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

2.8

2.1

1.8

2.8

2.1

2.0

2.8

2.1

2.8

2.1

2.3

2.8

2.1

2.4

3.5

2.7

2.8

4.0

3.0

3.2

4.5

3.4

3.7

6.0

4.9

4.6

6.0

4.9

5.5

Pitch

8.0

6.2

7.4

10.0

8.0

9.3

T325 0200 • • T325 0250 • T325 0300 • T325 0400 T325 0500 T325 0600 T325 0800 T325 1000

drill ø

Item #

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2 M 18 x 2.5 125 M 20 x 2.5 140

9.0

7.0

11.2

11.0

9.0

13.1

12.0

9.0

15.1

14.0

11.0

16.9

16.0

12.0

18.9

T326 T326 1200 T326 1400 T326 1600 • •

T752 • • • • •

T328 T328 1200 T328 1400 T328 1600 • •

• • • • • •

T327 0500 T327 0600 T327 0800 T327 1000

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • •

• • •

• • • • • •

• • • • • • • • • • • •

T325 / T326 T751 / T752 T327 / T328

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Tech Info

ISO VDI 3323

• • •

1200 1400 1600 1800 2000

Pitch

• • •

• • • • • • • • • • • •

Size Ref.

Reamers

HSS Endmills

0200 0220 0230 0250 0260 0300 0350 0400 0500 0600 0800 1000

T327 D0410

Size Ref.

T751 D0410

DIN Taps

Vc Page #: 485 

T325 D0410

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi metrici, Rullare, UNI • SPM per prestazioni superiori • Geometria specifica dedicata • Ideale per materiali con >10% di allungamento • Fori ciechi & passanti • Profondità fino a 3 x d1

269

Back to index Contents

DIN Taps Metric, Forming, NH

Carbide Drills

• SPM for superior performance • Suitable for materials with restricted ductility • Application specific geometry for harder materials (GGV) • Through or blind holes • Depths up to 2 x d1

IMPROVED

PERFORMANCE

Machos DIN Métrico, Laminación, NH • SPM para un rendimiento superior • Adecuado para materiales con ductilidad restringida. • Geometría específica para materiales más duros (GGV) • Agujeros pasantes o ciegos • Profundidades de hasta 2 x d1

HSS Drills

Tarauds DIN Métrique par déformation, avec rainures de lubrification, type NH • SPM pour une meilleure performance • recommandé pour les matériaux difficiles • Trous borgnes et débouchants • profondeur jusqu’à 2 x d1 DIN Maschi metrici, Rullare, NH • SPM per prestazioni superiori • Ideale per materiali con ristretta duttilità • Geometria specifica dedicata a materiali temprati (GGV) • Fori ciechi & passanti • Profondità fino a 2 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 485  Size Ref.

DIN Taps

Pitch

drill ø

T331 D0408 PM-HSS Co TiN NH Multi-Coolant Groove Form C / 2.5 x P 6HX

M 3 x 0.5 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

3.5

2.7

2.8

4.5

3.4

3.7

6.0

4.9

4.6

6.0

4.9

5.5

8.0

6.2

7.4

10.0

8.0

9.3

T331 0300 T331 0400 T331 0500 T331 0600 T331 0800 T331 1000

Item #

Size Ref.

drill ø

Item #

1200 1400 1600

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2

17.5

9.0

7.0

11.2

11.0

9.0

13.1

12.0

9.0

15.1

Carbide Endmills

0300 0400 0500 0600 0800 1000

HSS Endmills 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

270

T332 T332 1200 T332 1400 T332 1600

S Titanium & Super Alloys H Hard Materials

• • • • • •

• • • •

• •

Tech Info

T331 T332

• • • • • • • • • • • • • • • •

Reamers

ISO VDI 3323

• • • • • • • •

Pitch

• Optimal • Effective

Contents

Back to index

DIN Taps Metric, Forming, VHM

Carbide Drills

Machos DIN Métrico, Laminación, VHM • VHM para alta producción. • Adecuado para materiales con ductilidad restringida y aluminio con alto contenido de silicio • Agujeros pasantes o ciegos • Profundidades hasta 2 x d1

• VHM for high volume production • Suitable for materials with restricted ductility & high Silicon cast Aluminium • Through or blind holes • Depths up to 2 x d1

HSS Drills

Tarauds DIN Métrique VHM par déformation, avec rainures de lubrification, • Carbure VHM pour la production de masse • Convient aux matériaux durs et fonderies d’aluminium fortement chargées en silice. • Trous borgnes et débouchants • Profondeur jusqu’à 2 x d1

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 485  z

drill ø

VHM

TiCN

Multi-Coolant Groove

Multi-Coolant Groove IK

Form C / 2.5 x P

6HX

Item #

• • •

0300 0400 0500 0600 0800 1000

M 3 x 0.5 56 M 4 x 0.7 63 M 5 x 0.8 70 80 M6 x1 M 8 x 1.25 90 M 10 x 1.5 100

3.5

2.7

2.8

4.5

3.4

3.7

6.0

4.9

4.6

6.0

4.9

5.5

8.0

6.2

7.4

10.0

8.0

9.3

• • • • • •

Size Ref.

drill ø

Item #

M 12 x 1.75 110 110 M 14 x 2 110 M 16 x 2

9.0

7.0

11.2

11.0

9.0

13.1

12.0

9.0

15.1

T683 • • •

T748 • • •

Pitch

VHM

DIN Taps

T747 D0414

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • •

• •

• • • • • • • • • • • • • • • •

T682 / T683 T747 / T748

Tech Info

ISO VDI 3323

• • • • • • • •

1200 1400 1600

Pitch

Reamers

HSS Endmills

Carbide Endmills

Size Ref.

T682 D0414

Tool Holding

ISO Taps

DIN Maschi metrici, Rullare, VHM • VHM per alti volume di produzione • Ideale per materiali con ristretta duttilità & alluminio con alta presenza di silicio • Fori ciechi & passanti • Profondità fino a 2 x d1

• Optimal • Effective

271

Back to index Contents

DIN Taps Metric Fine, Straight Flute, N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Through & blind holes • Suitable for machine operations • Depths up to 1 x d1 Tarauds DIN Métrique Fin, Goujure Droite, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Profondeur jusqu’à 1 x d1

HSS Drills

DIN Maschi metrici Fine, Elica dritta, N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi & passanti • Ideale per operazioni su macchine CN • Profondità fino a 2.5 x d1

ISO Taps

Machos DIN Métrico Fino, Ranuras Rectas, N • Uso general, Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Profundidades hasta 1 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  l1

drill ø

MF 3 x 0.35 56 MF 4 x 0.5 63 MF 5 x 0.5 70 MF 6 x 0.5 80 MF 6 x 0.75 80 MF 8 x 0.5 80 MF 8 x 0.75 80 90 MF 8 x 1 MF 10 x 0.75 90 90 MF 10 x 1 MF 10 x 1.25 100 100 MF 12 x 1 MF 12 x 1.25 100 MF 12 x 1.5 100 100 MF 14 x 1 MF 14 x 1.25 100 MF 14 x 1.5 100 100 MF 16 x 1 MF 16 x 1.5 100 110 MF 18 x 1 MF 18 x 1.5 110 125 MF 18 x 2 125 MF 20 x 1 MF 20 x 1.5 125 140 MF 20 x 2

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.5

4.5

3.4

5.3

6.0

4.9

7.5

6.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

Pitch

HSS Endmills Reamers Tech Info

T298 T299

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

272

HSSE

Brt

TIN

Form C / 2.5 x P

ISO 2 / 6H

Item #

T298 0302 T298 0403 T298 0503 T298 0603 T298 0604 T298 0803 T298 0804 T298 0805 T298 1004 T298 1005 T298 1006 T298 1205 T298 1206 T298 1207 T298 1405 T298 1406 T298 1407 T298 1605 T298 1607 T298 1805 T298 1807 T298 1808 T298 2005 T298 2007 T298 2008

• • • T299 0603 • • • T299 0805 • T299 1005 T299 1006 T299 1205 T299 1206 T299 1207 T299 1405 T299 1406 T299 1407 T299 1605 T299 1607 • T299 1807 •

T299 2007 •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• •

Carbide Endmills

ISO VDI 3323

T299 D0406

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • • • • • • • • • •

DIN Taps

0302 0403 0503 0603 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

• • • • • • • •

Size Ref.

T298 D0402

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Straight Flute, GG

Carbide Drills

• HSSE, for use in grey cast iron (GG) • VHM, for use in Al >10% Si & cast iron (GGG) • Through & blind holes • Depths up to 3 x d1

HSS Drills

Tarauds DIN Métrique Fin Goujure Droite, type GG • HSSE, pour utilisation dans les fontes grises (GG) • Carbure VHM , pour utilisation dans les Al >10% Si & fontes (GGG) • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi metrici Fine, Elica dritta, GG • HSSE, per lavorazioni su ghisa grigia(GG) • VHM, per lavorazioni siu Al >10% Si & ghisa (GGG) • Fori ciechi & passanti • Profondità fino a 3 x d1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

6.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

M 8

ISO VDI 3323

Low Relief

Form C / 2.5 x P

6HX

Item #

• T300 0403 T300 0503 T300 0604 • • T300 0805 • T300 1005 T300 1006 • T300 1206 T300 1207 • T300 1406 T300 1407 • T300 1607 • T300 1807 • • T300 2007 •

• T301 0403 T301 0503 T301 0604 • • T301 0805 • T301 1005 T301 1006 • T301 1206 T301 1207 • T301 1406 T301 1407 • T301 1607 • T301 1807 • • T301 2007 •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • •

T300 T301

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

MF 3 x 0.35 56 MF 4 x 0.5 63 MF 5 x 0.5 70 MF 6 x 0.75 80 MF 8 x 0.5 80 MF 8 x 0.75 80 90 MF 8 x 1 MF 10 x 0.75 90 90 MF 10 x 1 MF 10 x 1.25 100 100 MF 12 x 1 MF 12 x 1.25 100 MF 12 x 1.5 100 100 MF 14 x 1 MF 14 x 1.25 100 MF 14 x 1.5 100 100 MF 16 x 1 MF 16 x 1.5 100 110 MF 18 x 1 MF 18 x 1.5 110 125 MF 18 x 2 125 MF 20 x 1 MF 20 x 1.5 125 140 MF 20 x 2

Low Relief

DIN Taps

TiCN

Carbide Endmills

Pitch

HSSE

HSS Endmills

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

DIN 374

HSSE Ni + Blu

•

Size Ref.

T301 D0408

Reamers

Vc Page #: 484 

T300 D0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Ranuras Rectas, GG • HSSE, para uso en fundición gris (GG) • VHM, para uso en Al> 10% Si y fundición (GGG) • Agujeros pasantes y ciegos • Profundidades de hasta 3 x d1

273

Back to index Contents

DIN Taps Metric Fine, Straight Flute, GG

Carbide Drills

• VHM, for use in Al >10% Si & cast iron (GG) • Through & blind holes • Depths up to 3 x d1 Tarauds DIN Métrique, Goujure Droite , type GG • Taraud CARBURE, recommandé pour les Al >10% Si & fonte (GG) • Trous borgnes & débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi Metrici, Elica dritta, GG • Maschio metallo duro specifico per Al >10% Si & ghisa (GG) • Fori ciechi & passanti • Profondità fino a 3 x d1 Machos DIN Métrico, Ranuras Rectas, GG • VHM, para uso en Al> 10% Si y fundición (GG) • Agujeros pasantes y ciegos • Profundidades hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  Size Ref.

DIN Taps

Pitch

DIN 371

0805 MF 8 x 1 1005 MF 10 x 1

Carbide Endmills

DIN 376 1207 MF 12 x 1.5 1407 MF 14 x 1.5

drill ø

8.0

6.2

7.0

100

10.0

8.0

9.0

110

9.0

7.0

10.5

110

11.0

9.0

12.5

T743

T744

D0414

VHM

TiCN

Low Relief

Form C / 2.5 x P

6HX

Item #

• •

HSS Endmills Reamers 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

T743 T744

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • •

Tech Info

274

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Straight Flute, DC

Carbide Drills

• Premium design for cast aluminium and cast iron (Short Chipping) • Through & blind holes • Depths up to 1.5 x d1 • Axial coolant duct available, photo not correct P230

HSS Drills

Tarauds DIN Métrique Fin, Goujure Droite, type DC • Premier choix pour les fontes d’aluminium et les fontes à copeaux courts • Trous borgnes et débouchants • Profondeur jusqu’à 1.5 x d1 • Disponible avec arrosage centrale DIN Maschi metrici Fine, Elica dritta, DC • Premium design per fusioni di alluminion e ghisa (truciolo corto) • Fori ciechi & passanti • Profondità fino a 1,5 x d1 • Disponibile con passaggio di refrigerazione assiale

Size Ref.

Pitch

7.0

9.0

drill ø

5.5

8.8

7.0

10.5

11.0

9.0

12.5

12.0

9.0

14.5

PM-HSS Co

TiCN

Die Cast

Form E / 1.5 x P

IK 6HX

6HX

Item #

T668 1006 T668 1207 T668 1407 T668 1607

T669 1006 T669 1207 T669 1407 T669 1607

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • •

T668 T669

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

Carbide Endmills

1006 MF 10 x 1.25 100 1207 MF 12 x 1.5 100 1407 MF 14 x 1.5 100 1607 MF 16 x 1.5 100

T669 D0408

Vc Page #: 484 

T668 D0408

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Ranuras Rectas, DC • Para roscado de producción en materiales de fundición prensada • PM-HSS Co para una mayor vida útil de la herramienta • Forma E para máxima profundidad de rosca en agujeros ciegos • Profundidades hasta 1.5 x d1

• Optimal • Effective

275

Back to index Contents

DIN Taps Metric Fine, Straight Flute, XH

Carbide Drills

• Use in hardened steels 42-52 HRC • Through & blind holes • Suitable for machine operations • Depths up to 1.5 x d1

HSS Drills

DIN Maschi metrici Fine, Elica dritta, XH • Maschio per materiali temprati 42-52 HRC • Fori ciechi & passanti • Ideale per operazionei con macchine CN • Profondità fino a 1.5 x d1

Tarauds DIN Métrique Fin, Goujure Droite, type XH • Recommandé pour les aciers à 42-52 HRC • Trous borgnes et débouchants • Profondeur jusqu’à 1.5 x d1

Machos DIN Métrico Fino, Ranuras Rectas, XH • Uso en aceros endurecidos 42-52 HRC • Agujeros pasantes y ciegos • Profundidades de hasta 1.5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  Pitch

drill ø

MF 8 x 1 MF 10 x 1 MF 10 x 1.25 MF 12 x 1 MF 12 x 1.25 MF 12 x 1.5

6.0

4.9

7.1

7.0

5.5

9.1

7.0

5.5

8.9

9.0

7.0

11.1

9.0

7.0

10.9

9.0

7.0

10.6

Size Ref.

DIN Taps

0805 1005 1006 1205 1206 1207

T343

T344

DO408

SPM

TiCN

Special Relief

Form C / 3 x P

Form D / 5 x P

6HX

Item #

• • • • • •

Carbide Endmills HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

276

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • •

T343 T344

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Straight Flute, VH

Carbide Drills

• Use in hardened steels 50-60 HRC • Through & blind holes • Suitable for machine operations • Depths up to 1.5 x d1 Tarauds DIN Métrique Fin, Goujure Droite, type VH • Recommandé pour les aciers à 50-60 HRC • Trous borgnes et débouchants • Profondeur jusqu’à 1.5 x d1

HSS Drills

DIN Maschi metrici Fine, Elica dritta, VH • Maschio per materiali temprati 50-60 HRC • Fori ciechi & passanti • Ideale per operazionei con macchine CN • Profondità fino a 1.5 x d1

Pitch

DIN 371

drill ø

8.0

6.2

7.0

10.0

8.0

9.0

10.0

8.0

9.0

7.0

10.5

9.0

7.0

10.5

11.0

9.0

12.5

12.0

9.0

14.1

16.0

12.0

17.7

VHM

TiCN

Special Relief

Form C / 3 x P

Form D / 5 x P

6HX

Item #

T345 0805 T345 1005 T345 1006

T346 0805 T346 1005 T346 1006

T345 1206 T345 1207 • • •

T346 1206 T346 1207 • • •

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • • • • • • • •

• •

T345 T346

• •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

90 0805 MF 8 x 1 100 1005 MF 10 x 1 1006 MF 10 x 1.25 100 DIN 376 1206 MF 12 x 1.25 110 1207 MF 12 x 1.5 110 1407 MF 14 x 1.5 110 1607 MF 16 x 1.5 110 2007 MF 20 x 1.5 140

VHM

Size Ref.

T346 D0414

DIN Taps

Vc Page #: 484 

T345 D0414

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Ranuras Rectas, VH • Uso en aceros endurecidos 50-60 HRC • Agujeros pasantes y ciegos • Profundidades de hasta 1.5 x d1

• Optimal • Effective

277

Back to index

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Through holes • Suitable for machine operations • Depths up to 3 x d1

HSS Drills

DIN Maschi metrici Fine, Gun, N • Maschio universale per materiali fino a circa 1000N/mm² • Fori passanti • Ideale per operazioni su macchine CN • Profondità fino a 3 x d1

Tarauds DIN Métrique Fin, Gun, type N • Utilisation générale dans les aciers jusqu’à 1000 N/mm² • Trous débouchants • Profonceur jusqu’à 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

Pitch

drill ø

2.1 2.7 3.4 4.9 4.9 4.9 5.5 5.5 5.5 7.0 7.0 7.0 9.0 9.0 9.0 9.0 9.0 11.0 11.0 11.0 12.0 12.0 12.0 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5

5 6 6 8 8 8 8 8 8 10 10 10 12 12 12 12 12 14 14 14 15 15 15 17 17 17 17 17 17 17 17

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2.65 3.5 4.5 5.3 7.5 7.3 7.0 9.3 9.0 8.8 11.0 10.8 10.5 13.0 12.8 12.5 14.5 14.5 17.0 16.5 16.0 19.0 18.5 18.0 18.5 20.5 20.0 23.0 22.5 22.0 24.0 23.5

Tech Info

M 8

T155

T156

T157

D0402

D0406

HSSE

Brt

Blu

TiN

6G Form B / 4.5 x P

Form B / 4.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

Item #

T154 0302 T154 0403 T154 0503 T154 0604 T154 0803 T154 0804 T154 0805 T154 1004 T154 1005 T154 1006 T154 1205 T154 1206 T154 1207 T154 1405 T154 1406 T154 1407 T154 1605 T154 1607 T154 1805 T154 1807 T154 1808 T154 2005 T154 2007 T154 2008 T154 2205 T154 2207 T154 2208 T154 2405 T154 2407 T154 2408 • T154 2507

• • • T155 0604 T155 0803 T155 0804 T155 0805 • T155 1005 T155 1006 T155 1205 T155 1206 T155 1207 • T155 1406 T155 1407 • • • • • • • • • • • • • • • •

• T156 0403 T156 0503 T156 0604 • T156 0804 T156 0805 T156 1004 T156 1005 T156 1006 T156 1205 T156 1206 T156 1207 • T156 1406 T156 1407 • T156 1607 • T156 1807 • • T156 2007 • • • • • • • • •

• • • T157 0604 T157 0803 T157 0804 T157 0805 • T157 1005 T157 1006 T157 1205 T157 1206 T157 1207 • T157 1406 T157 1407 • T157 1607 • T157 1807 • • T157 2007 • • • • • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Reamers

2.2 2.8 3.5 4.5 6.0 6.0 6.0 7.0 7.0 7.0 9.0 9.0 9.0 11.0 11.0 11.0 12.0 12.0 14.0 14.0 14.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0

• •

HSS Endmills

• • • •

Carbide Endmills

T154 T155 T156 T157

8 10 12 14 18 18 22 20 20 24 22 22 22 22 22 22 22 22 25 25 34 25 25 34 25 25 28 28 28 28 28 28

ISO VDI 3323

• • • • • • • • • • • • • • • • • • • • • • • • • •

DIN Taps

278

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008 2205 2207 2208 2405 2407 2408 2505 2507

T154 D0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

ISO Taps

Machos DIN Métrico Fino, Entrada Corregida, N • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

• •

Contents

DIN Taps Metric Fine, Gun, N

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Gun, N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Through holes • Suitable for machine operations • Depths up to 3 x d1 Tarauds DIN Métrique Fin, Gun, type N • Utilisation générale dans les aciers jusqu’à 1000 N/mm² • Trous débouchants • Profonceur jusqu’à 3 x d1

HSS Drills

DIN Maschi metrici Fine, Gun, N • Maschio universale per materiali fino a circa 1000N/mm² • Fori passanti • Ideale per operazioni su macchine CN • Profondità fino a 3 x d1

drill ø

18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 22 25 25 28 28 28 28 28 28 32 32 32 32 36 36 36 36 40

14.5 14.5 14.5 14.5 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18 20 20 22 22 22 22 22 22 24 24 24 24 29 29 29 29 32

17 17 17 17 19 19 19 19 21 21 21 21 23 23 25 25 25 25 25 25 27 27 27 27 32 32 32 32 35

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

23.0 25.0 24.5 24.0 25.5 25.0 26.5 26.0 29.0 28.5 28.0 30.5 31.5 31 32.5 33.5 34.5 34 33 36.5 38.5 40.5 40 39 43.5 43 46.5 48.5 50.5

P 7

M 8

TiN

6G Form B / 4.5 x P

Form B / 4.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

Item #

• • T154 2607 • T154 2707 T154 2708 T154 2807 • T154 3005 T154 3007 T154 3008 T154 3207 T154 3307 T154 3308 T154 3407 T154 3507 T154 3607 T154 3608 T154 3609 T154 3807 T154 4007 T154 4207 T154 4208 T154 4209 T154 4507 T154 4508 T154 4807 T154 5007 T154 5207

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

HSSE

Blu

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • •

T154 T155 T156 T157

• • • •

ISO VDI 3323

HSSE

Brt

HSSE

Brt

DIN Taps

l2 28 28 28 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 56 30 30 30 30 30 32 32 32 32 32

HSSE

Carbide Endmills

l1 140 140 140 140 140 140 140 140 150 150 150 150 160 160 170 170 170 170 200 170 170 170 170 200 180 180 190 190 190

T157 D0406

• •

2508 2605 2607 2608 2707 2708 2807 2808 3005 3007 3008 3207 3307 3308 3407 3507 3607 3608 3609 3807 4007 4207 4208 4209 4507 4508 4807 5007 5207

T156 D0402

HSS Endmills

Pitch

MF 25 x 2 MF 26 x 1 MF 26 x 1.5 MF 26 x 2 MF 27 x 1.5 MF 27 x 2 MF 28 x 1.5 MF 28 x 2 MF 30 x 1 MF 30 x 1.5 MF 30 x 2 MF 32 x 1.5 MF 33 x 1.5 MF 33 x 2 MF 34 x 1.5 MF 35 x 1.5 MF 36 x 1.5 MF 36 x 2 MF 36 x 3 MF 38 x 1.5 MF 40 x 1.5 MF 42 x 1.5 MF 42 x 2 MF 42 x 3 MF 45 x 1.5 MF 45 x 2 MF 48 x 1.5 MF 50 x 1.5 MF 52 x 1.5

Size Ref.

T155 D0402

Reamers

Vc Page #: 483 

T154 D0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Entrada Corregida, N • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

• Optimal • Effective

279

Back to index Contents

DIN Taps Metric Fine, Gun, Black Magic

Carbide Drills

Machos DIN Métrico Fino, Entrada Corregida, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

watch the video

HSS Drills

Tarauds DIN Métrique Fin, Gun, type N • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous débouchants jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

ISO Taps

DIN Maschi metrici Fine, Gun, Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi fino a 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

Tool Holding

Product Name Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  l1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

6.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

Pitch

Tech Info

M 8

HARDLUBE

UNI Special Relief Form B / 4.5 x P 6HX

Item # • • • T689 0604 T689 0803 • T689 0805 • T689 1005 T689 1006 T689 1205 T689 1206 T689 1207 T689 1405 T689 1406 T689 1407 T689 1605 T689 1607 T689 1805 T689 1807 • T689 2005 T689 2007 •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

Reamers

•

HSS Endmills

T689

• •

Carbide Endmills

ISO VDI 3323

• • • •

DIN Taps

280

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

PM-HSSE V3

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • •

Size Ref.

T689 D0410

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Gun, VA

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN Métrique Fin, Gun, type VA • Recommandés pour les inox et métaux à copeaux longs • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi metrici Fine, Gun, VA • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori passanti • Profondità fino a circa 3 x d1 • Adatto per operazioni su macchina CN

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

6.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

P 6

M 8

Special Relief

Form B / 4.5 x P

ISO 2 / 6H

Item #

• • • T158 0604 T158 0803 T158 0804 T158 0805 T158 1004 T158 1005 T158 1006 T158 1205 T158 1206 T158 1207 T158 1405 T158 1406 T158 1407 T158 1605 • T158 1805 T158 1807 • T158 2005 T158 2007 •

• • • T161 0604 T161 0803 T161 0804 T161 0805 • T161 1005 T161 1006 T161 1205 T161 1206 T161 1207 • T161 1406 T161 1407 • • • • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

•

• • • • • • • • •

• • • •

• • • • • • • •

T158 T161

•

ISO VDI 3323

Special Relief

TiCN

DIN Taps

Pitch

HSSE

Blu

Carbide Endmills

• • • • • •

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

HSSE

HSS Endmills

Size Ref.

T161 D0408

Reamers

Vc Page #: 483 

T158 D0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Entrada Corregida, VA • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1.

• Optimal • Effective

281

Back to index Contents

DIN Taps Metric Fine, Gun, VA PM

Carbide Drills

Machos DIN Métrico Fino, Entrada Corregida, VA PM • PM-HSSE V3 para un mayor rendimiento • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1.

• Use in stainless steels and high strength steels up to 1000N/mm² • PM-HSSE V3 offers higher edge hardness than standard VA series • Through holes • Suitable for synchronous tapping in machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN Métrique Fin, Gun, type VA-PM • PM-HSSE V3 pour de meilleures performances • Recommandé pour les inox et les aciers haute résistance • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi metrici Fine, Gun, VA PM • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • PM-HSSE V3 offre una durezza tagliente maggione della serie VA • Fori passanti • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  l1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

6.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

Tech Info

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

282

PM-HSSE V3

Blu

TiCN

VA PM

Special Relief

Form B / 4.5 x P

6HX

Item #

• • • • • • • • • • • • • • • • • • • • • • • •

• • • T160 0604 T160 0803 • • T160 1004 T160 1005 • T160 1205 T160 1206 T160 1207 T160 1405 T160 1406 • T160 1605 • • T160 1807 • T160 2005 • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • •

Reamers

• •

HSS Endmills

T159 T160

• • • •

Carbide Endmills

ISO VDI 3323

T160 D0408

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

Pitch

•

• • • • • • • •

DIN Taps

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

• • • • • •

Size Ref.

T159 D0402

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Gun, NH

Carbide Drills

• Suitable for harder materials up to 42 HRC • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1 Tarauds DIN Métrique Fin, Gun, type NH • Convient aux matériaux jusqu’à 42 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi metrici Fine, Gun, NH • Maschio per materiali temprati fino a 42 HRC • Fori Passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

6.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

P 4

M 8

Form B / 4.5 x P

ISO2 / 6H

Item #

• • • • • • T654 0805 • T654 1005 • • T654 1206 • • • • • • • • • • • •

T163 0302 T163 0403 T163 0503 T163 0604 T163 0803 T163 0804 T163 0805 T163 1004 T163 1005 T163 1006 T163 1205 T163 1206 T163 1207 T163 1405 T163 1406 T163 1407 T163 1605 T163 1607 T163 1805 T163 1807 T163 1808 T163 2005 T163 2007 T163 2008

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

Form B / 4.5 x P

•

• • • • • •

T654 T163

• • • • • •

ISO VDI 3323

TiAlN

DIN Taps

Pitch

PM-HSSE V3

Blu

Carbide Endmills

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

PM-HSSE V3

HSS Endmills

Size Ref.

T163 D0410

Reamers

Vc Page #: 483 

T654 D0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Entrada Corregida, NH • Uso en aceros hasta 42 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

• Optimal • Effective

283

Back to index Contents

DIN Taps Metric Fine, Gun, H

Carbide Drills

• Suitable for harder materials up to 45 HRC • Through holes • Depths up to approx. 1.5 x d1 Tarauds DIN Métrique Fin, Gun, type H • Convient aux matériaux jusqu’à 45 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi metrici Fine, Gun, H • Maschio per materiali temprati fino a 45 HRC • Fori passanti • Profondità fino a circa 1,5 x d1 Machos DIN Métrico Fino, Entrada Corregida, H • Uso en aceros hasta 45 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Pitch

drill ø

MF 6 x 0.75 MF 8 x 1 MF 10 x 1 MF 10 x 1.25 MF 12 x 1.25 MF 12 x 1.5 MF 14 x 1.5 MF 16 x 1.5 MF 18 x 1.5 MF 20 x 1.5

4.5

3.4

5.3

6.0

4.9

7.0 9.0

Size Ref.

DIN Taps

Carbide Endmills

0604 0805 1005 1006 1206 1207 1407 1607 1807 2007

7.0

5.5

100

7.0

5.5

8.8

100

9.0

7.0

10.8

100

9.0

7.0

10.5

100

11.0

9.0

12.5

100

12.0

9.0

14.5

110

14.0

11.0

16.5

125

16.0

12.0

18.5

T710 D0408 PM-HSS Co TiCN

H Low Relief Form B / 4.5 x P 6HX

Item # • • • • • • • • • •

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

• • • • • • •

•

• • • • • • •

• • •

• •

T710

•

Tech Info

284

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Spiral Flute, R15 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1

HSS Drills

Tarauds DIN Métrique Fin, Hélice 15°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 1.5 x d1 DIN Maschi metrici Fine, Tagliente a Elica, R15 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Ideale per operazioni su macchine CN • Profondità fino a 1,5 x d1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

7.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

P 4

M 8

Form C / 2.5 x P

ISO 2 / 6H

Item #

T243 0302 T243 0403 T243 0503 T243 0604 T243 0803 T243 0804 T243 0805 T243 1004 T243 1005 T243 1006 T243 1205 T243 1206 T243 1207 T243 1405 T243 1406 T243 1407 T243 1605 T243 1607 T243 1805 T243 1807 T243 1808 T243 2005 T243 2007 T243 2008

• T244 0403 T244 0503 T244 0604 T244 0803 T244 0804 T244 0805 T244 1004 T244 1005 T244 1006 T244 1205 T244 1206 T244 1207 T244 1405 T244 1406 T244 1407 T244 1605 T244 1607 T244 1805 T244 1807 T244 1808 T244 2005 T244 2007 •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • • • •

T243 T244

• •

ISO VDI 3323

R15

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

R15

DIN Taps

Pitch

TiN

Carbide Endmills

HSSE

Brt

• • • •

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

HSSE

HSS Endmills

Size Ref.

T244 D0406

Reamers

Vc Page #: 482 

T243 D0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Helicoidal R15, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 1.5 x d1

• Optimal • Effective

285

Back to index

HSS Drills

Tarauds DIN Métrique Fin, Hélice 40°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1 • Diamètre de queue et carré suivant DIN371 DIN Maschi metrici Fine, Tagliente a Elica, R40 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Ideale per operazioni su macchine CN • Profondità fino a 2,5 x d1

ISO Taps

Machos DIN Métrico Fino, Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

6.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

14.5

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

14.5

18.5

18.0

14.5

20.5

18.0

14.5

20.0

18.0

14.5

23.0

Size Ref.

Pitch

Tech Info

M 8

T246

T247

T248

D0402

D0406

HSSE

Brt

Blu

TiN

R40

Form C / 2.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

Item #

• • • T245 0604 • • T245 0805 • T245 1005 T245 1006 • T245 1206 T245 1207 • • T245 1407 • T245 1607 • T245 1807 • • T245 2007 • T245 2205 T245 2207 T245 2208 T245 2405

• • • T246 0604 • • T246 0805 • T246 1005 T246 1006 T246 1205 T246 1206 • • • T246 1407 • • • • • • • • • • • •

• • • T247 0604 • • T247 0805 • T247 1005 T247 1006 • T247 1206 T247 1207 • • T247 1407 • T247 1607 • T247 1807 • • T247 2007 • • • • •

• • • T248 0604 • • T248 0805 • T248 1005 T248 1006 • T248 1206 T248 1207 • • T248 1407 • T248 1607 • T248 1807 • • T248 2007 • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Reamers

• •

HSS Endmills

T245 T246 T247 T248

• • • •

Carbide Endmills

ISO VDI 3323

• • • • • • • • • • • • • • • • • • • • • • • • • •

DIN Taps

286

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008 2205 2207 2208 2405

T245 D0402

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

• •

Contents

DIN Taps Metric Fine, Spiral Flute, R40 N

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Spiral Flute, R40 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

HSS Drills

drill ø

18.0

14.5

22.5

140

18.0

14.5

22.0

140

18.0

14.5

24.0

140

18.0

14.5

23.5

140

18.0

14.5

23.0

140

18.0

14.5

25.0

140

18.0

14.5

24.5

140

18.0

14.5

24.0

140

20.0

16.0

25.5

140

20.0

16.0

25.0

140

20.0

16.0

26.5

140

20.0

16.0

26.0

150

22.0

18.0

29.0

150

22.0

18.0

28.5

150

22.0

18.0

28.0

HSSE

Brt

Blu

TiN

R40

Form C / 2.5 x P

ISO 2 / 6H

ISO 3 / 6G

ISO 2 / 6H

Item #

T245 2407 T245 2408 • T245 2507 • • T245 2607 • T245 2707 T245 2708 T245 2807 • T245 3005 T245 3007 T245 3008

• • • • • • • • • • • • • • •

l1 140

T248 D0406

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • •

T245 T246 T247 T248

• • • •

ISO VDI 3323

Tech Info

Reamers

2407 2408 2505 2507 2508 2605 2607 2608 2707 2708 2807 2808 3005 3007 3008

T247 D0402

DIN Taps

Pitch

MF 24 x 1.5 MF 24 x 2 MF 25 x 1 MF 25 x 1.5 MF 25 x 2 MF 26 x 1 MF 26 x 1.5 MF 26 x 2 MF 27 x 1.5 MF 27 x 2 MF 28 x 1.5 MF 28 x 2 MF 30 x 1 MF 30 x 1.5 MF 30 x 2

Size Ref.

T246 D0402

Carbide Endmills

Vc Page #: 482 

T245 D0402

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

• Optimal • Effective

287

Back to index Contents

DIN Taps Metric Fine, Spiral Flute, R50 Black Magic

Carbide Drills

Machos DIN Métrico Fino, Helicoidal R50, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Depths up to approx. 3 x d1 • Suitable for synchronous tapping in machine operations

watch the video

HSS Drills

Tarauds DIN Métrique Fin, Hélice 50°, Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

ISO Taps

DIN Maschi metrici Fine, Tagliente a Elica, R50 Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Profondità fino a 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

Tool Holding

Product Name Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

7.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

Pitch

Tech Info

M 8

HARDLUBE

UNI R50 Form C / 2.5 x P 6HX

Item # • • • T686 0604 T686 0803 • T686 0805 T686 1004 T686 1005 T686 1006 T686 1205 T686 1206 T686 1207 T686 1405 T686 1406 T686 1407 T686 1605 T686 1607 T686 1805 • • T686 2005 T686 2007 •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

Reamers

•

HSS Endmills

T686

• •

Carbide Endmills

ISO VDI 3323

• • • •

DIN Taps

288

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

PM-HSSE V3

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • •

Size Ref.

T686 D0410

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Spiral Flute, R45 Al

Carbide Drills

• Suitable for use in wrought aluminium and low silicon aluminium • Blind holes • Depths up to approx. 3 x d1 • CrN for longer tool life

HSS Drills

Tarauds DIN Métrique Fin, Hélice 45°, coupe aluminium • Convient au aluminiums forgés et faiblement chragés en silice • Trous borgnes • Profondeur jusqu’à 3 x d1 • CrN pour une meilleure durée de vie DIN Maschi metrici Fine, Tagliente a Elica, R45 Al • Ideale per Fusione di alluminio e allumino con bassa presenza di silicio • Fori ciechi • Profondità fino a 3 x d1 • CrN per ottimizzare vita utensile

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l2

drill ø

MF 8 x 1 MF 10 x 1 MF 10 x 1.25 MF 12 x 1 MF 12 x 1.25 MF 12 x 1.5

6.0

4.9

7.0

5.5

9.0

100

7.0

5.5

8.8

100

9.0

7.0

11.0

100

9.0

7.0

10.8

100

9.0

7.0

10.5

Al R45 2 Flute Form C / 2.5 x P ISO 2 / 6H

Item # • • • • • •

P 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

T703 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Carbide Endmills

0805 1005 1006 1205 1206 1207

CrN

HSSE

DIN Taps

Pitch

Size Ref.

T703 D0404

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Helicoidal R45, Al • Adecuado para su uso en aluminio forjado y aluminio con bajo contenido de silicio • Agujeros ciegos • Profundidades de hasta 3 x d1 • CrN para una mayor vida útil de la herramienta

289

Back to index

Tarauds DIN Métrique Fin, Hélice 45°, type VA-DH • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • Trous borgnes • Peut etre utilisé sur machines synchro adaptées • Profondeur jusqu’à 3 x d1

ISO Taps

Machos DIN Métrico Fino, Helicoidal R45, VA DH • Adecuado para roscado sincronizado en agujeros profundos • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

7.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

290

T251 D0408

HSSE

Blu

TiCN

VA DH

R45

Form C / 2.5 x P

ISO 2 / 6H

Item #

• • • T249 0604 • • T249 0805 • T249 1005 T249 1006 T249 1205 T249 1206 • • • T249 1407 • • • • • • • •

• • • T251 0604 • • T251 0805 • T251 1005 T251 1006 T251 1205 T251 1206 • • • T251 1407 • • • • • • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • •

Tech Info

• •

Reamers

•

HSS Endmills

T249 T251

• • • • •

Carbide Endmills

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

Pitch

• • • • • • •

DIN Taps

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

• • • •

Size Ref.

T249 D0402

•

HSS Drills

DIN Maschi metrici Fine, Tagliente a Elica, R45 VA DH • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori ciechi • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 3 x d1

•

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Blind holes • Suitable for synchronous tapping in machine operations • Depths up to approx. 3 x d1

•

Contents

DIN Taps Metric Fine, Spiral Flute, R45 VA DH

• Optimal • Effective

DIN Taps Metric Fine, Spiral Flute, R50 VA PM Machos DIN Métrico Fino, Helicoidal R50, VA PM • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos profundos • Profundidad hasta 3 x d1

• Use in stainless steels and high strength steels up to 1000N/mm² • PM-HSSE V3 offers higher edge hardness than standard VA series • Blind holes • Suitable for synchronous tapping in machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN Métrique Fin, Hélice 50°, type VA-PM • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • PM-HSSE V3 pour plus de résistance que la série VA sandard • Trous borgnes • Peut etre utilisé sur les machines synchro adaptées • Profondeur jusqu’à 3 x d1

Carbide Drills

Contents

Back to index

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

7.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

M 8

R50

Form C / 2.5 x P

6HX

Item #

T250 0302 T250 0403 T250 0503 T250 0604 T250 0803 • T250 0805 T250 1004 T250 1005 T250 1006 T250 1205 T250 1206 T250 1207 T250 1405 T250 1406 T250 1407 T250 1605 T250 1607 • T250 1807

• • • T252 0604 T252 0803 • T252 0805 T252 1004 T252 1005 T252 1006 T252 1205 T252 1206 T252 1207 T252 1405 T252 1406 T252 1407 T252 1605 T252 1607 T252 1805 T252 1807

• T250 2007 •

T252 2005 T252 2007 •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

• • • • • •

• •

• • • • •

• • • • • • •

T250 T252

•

ISO VDI 3323

VA PM

TiCN

VA PM

DIN Taps

Pitch

PM-HSSE V3

Blu

Carbide Endmills

• • • • • •

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

PM-HSSE V3

HSS Endmills

Size Ref.

T252 D0408

Reamers

Vc Page #: 482 

T250 D0402

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi metrici Fine, Tagliente a Elica, R50 VA PM • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • PM-HSSE V3 offre una durezza tagliente maggione della serie VA • Fori ciechi • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 3 x d1

• Optimal • Effective

291

Back to index Contents

DIN Taps Metric Fine, Spiral Flute, R40 NH

Carbide Drills

• Suitable for harder materials up to 42 HRC • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

HSS Drills

DIN Maschi metrici Fine, Tagliente a Elica, R40 NH • Maschio per materiali temprati fino a 42 HRC • Fori ciechi • Adatto per operazioni su macchina CN • Profondità fino a circa 2,5 x d1

Tarauds DIN Métrique Fin, Hélice 40°, type NH • Convient aux matériaux jusqu’à 42 HRC • Trous borgnes • Profondeur jusqu’à 2.5 x d1

Machos DIN Métrico Fino, Helicoidal R40, NH • Uso en aceros de viruta corta, hasta 42 HRC • Agujeros ciegos • Profundidades de hasta 2,5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l1

drill ø

2.2

2.65

2.8

2.1

3.5

2.7

4.5

3.4

5.3

6.0

4.9

7.5

7.0

4.9

7.3

6.0

4.9

7.0

5.5

9.3

7.0

5.5

9.0

7.0

5.5

8.8

9.0

7.0

11.0

9.0

7.0

10.8

9.0

7.0

10.5

11.0

9.0

13.0

11.0

9.0

12.8

11.0

9.0

12.5

12.0

9.0

15.0

12.0

9.0

14.5

14.0

11.0

17.0

14.0

11.0

16.5

14.0

11.0

16.0

12.0

19.0

16.0

12.0

18.5

16.0

12.0

18.0

Pitch

HSS Endmills Reamers Tech Info

T655 T254

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

292

PM-HSSE V3

Blu

TiAlN

R40

Form C / 2.5 x P

ISO 2 / 6H

Item #

• • • T655 0604 • • • T655 1004 • • • • • • • • • • • • • • • •

T254 0302 T254 0403 T254 0503 T254 0604 T254 0803 T254 0804 T254 0805 T254 1004 T254 1005 T254 1006 T254 1205 T254 1206 T254 1207 T254 1405 T254 1406 T254 1407 T254 1605 T254 1607 T254 1805 T254 1807 T254 1808 T254 2005 T254 2007 T254 2008

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Carbide Endmills

ISO VDI 3323

• • • • • •

DIN Taps

0302 0403 0503 0604 0803 0804 0805 1004 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1805 1807 1808 2005 2007 2008

T254 D0410

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

Size Ref.

T655 D0402

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Spiral Flute, R15 H

Carbide Drills

• Suitable for harder materials up to 45 HRC • Blind holes • Depths up to 1.5 x d1 Tarauds DIN Métrique Fin, Hélice 15°, type H • Convient aux matériaux jusqu’à 45 HRC • Trous borgnes • Profondeur jusqu’à 2.5 x d1

HSS Drills

DIN Maschi metrici Fine, Tagliente a Elica, R15 H • Maschio per materiali temprati fino a 45 HRC • Fori ciechi • Profondità fino a 1,5 x d1

Vc Page #: 483  l3

drill ø

4.5

3.4

5.3

6.0

4.9

7.0 9.0

7.0

5.5

100

7.0

5.5

8.8

100

9.0

7.0

11.0

100

9.0

7.0

10.8

100

9.0

7.0

10.5

100

11.0

9.0

12.5

100

12.0

9.0

14.5

110

14.0

11.0

16.5

125

16.0

12.0

18.5

H R15 Form C / 3 x P ISO 2 / 6HX

Item # • • • • • • • • • • •

TiCN

DIN Taps

l1 80

PM-HSS Co

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

• • • • • •

•

• • • • • • •

• • •

•

T707

• •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0604 0805 1005 1006 1205 1206 1207 1407 1607 1807 2007

D0408

Carbide Endmills

Pitch

MF 6 x 0.75 MF 8 x 1 MF 10 x 1 MF 10 x 1.25 MF 12 x 1 MF 12 x 1.25 MF 12 x 1.5 MF 14 x 1.5 MF 16 x 1.5 MF 18 x 1.5 MF 20 x 1.5

Size Ref.

T707

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN Métrico Fino, Helicoidal R15, H • Uso en aceros de viruta corta, hasta 45 HRC • Agujeros ciegos • Profundidades de hasta 1,5 x d1

293

Back to index Contents

DIN Taps Metric Fine, Forming, N

Carbide Drills

• Suitable for materials with >10% elongation • Through or blind holes • Depths up to 3 x d1 Tarauds DIN Métrique Fin, par déformation, type N • Convient aux matériaux avec une élasticité de mini >10% • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi metrici Fine, Rullare, N • Ideale per materiali con >10% di allungamento • Fori ciechi & passanti • Profondità fino a 3 x d1 Machos DIN Métrico Fino, Laminación, con ranuras de refrigeración • Adecuado para materiales con >10% de elongación • Agujeros pasantes o ciegos • Profundidades hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 485  Size Ref.

DIN Taps

Carbide Endmills HSS Endmills

0503 0604 0804 0805 1005 1006 1205 1206 1207 1405 1406 1407 1605 1607 1807 2007

Pitch

drill ø

70 MF 5 x 0.5 MF 6 x 0.75 80 MF 8 x 0.75 80 90 MF 8 x 1 90 MF 10 x 1 MF 10 x 1.25 100 100 MF 12 x 1 MF 12 x 1.25 100 MF 12 x 1.5 100 100 MF 14 x 1 MF 14 x 1.25 100 MF 14 x 1.5 100 100 MF 16 x 1 MF 16 x 1.5 100 MF 18 x 1.5 110 MF 20 x 1.5 125

3.5

2.7

4.75

4.5

3.4

5.65

6.0

4.9

7.65

6.0

4.9

7.55

7.0

5.5

9.55

7.0

5.5

9.40

9.0

7.0

11.55

9.0

7.0

11.40

9.0

7.0

11.30

11.0

9.0

13.55

11.0

9.0

13.40

11.0

9.0

13.30

12.0

9.0

15.55

12.0

9.0

15.30

14.0

11.0

17.30

16.0

12.0

19.30

T773 D0408 HSSE TiCN

N Multi Coolant Groove Form C / 2.5 x P 6HX

Item # T773 0503 T773 0604 T773 0804 T773 0805 T773 1005 T773 1006 T773 1205 T773 1206 T773 1207 T773 1405 T773 1406 T773 1407 T773 1605 T773 1607 T773 1807 T773 2007

Reamers 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

• • • •

•

T773

• • • •

Tech Info

294

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps Metric Fine, Forming, NH

Carbide Drills

• SPM for superior performance • Suitable for materials with restricted ductility • Application specific geometry for harder materials (GGV) • Through or blind holes • Depths up to 2 x d1

HSS Drills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 485  d2

drill ø

5.5

9.55

5.5

9.40

11.55

11.40

11.30

13.55

13.40

13.30

15.30

17.30

Form C / 2.5 x P 6HX

Item # T834 1005 T834 1006 T834 1205 T834 1206 T834 1207 T834 1405 T834 1406 T834 1407 T834 1607 T834 1807

Pitch

Multi-Coolant Groove

DIN Taps

l2 10 13 14 14 14 16 16 16 16 20

TiN NH

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

• • • •

• •

• • • • • • • •

T834

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

1005 1006 1205 1206 1207 1405 1406 1407 1607 1807

PM-HSS Co

Carbide Endmills

90 MF 10 x 1 MF 10 x 1.25 100 100 MF 12 x 1 MF 12 x 1.25 100 MF 12 x 1.5 100 100 MF 14 x 1 MF 14 x 1.25 100 MF 14 x 1.5 100 MF 16 x 1.5 100 MF 18 x 1.5 110

Size Ref.

T834 D0408

Tool Holding

ISO Taps

DIN Maschi metrici, Rullare, NH • SPM per prestazioni superiori • Ideale per materiali con ristretta duttilità • Geometria specifica dedicata a materiali temprati (GGV) • Fori ciechi & passanti • Profondità fino a 2 x d1

295

Back to index Contents

DIN Taps UNC, Straight Flute, GG

Carbide Drills

• Use in grey cast iron (GG), brittle plastics, hard bronzes to a hardness of 850 N/mm² • Through or blind holes • Suitable for machine operations • Depths up to approx. 3 x d1 Tarauds DIN UNC, Goujure Droite, Type GG • Récommandé pour les fontes grises (GG), les plastiques et bronzes durs jusqu’à 850 N/mm² • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi UNC, Elica dritta, GG • Ideale per ghisa grigia (GG), plastiche fragili, bronzo indurito fino a una durezza di 850 N/mm² • Fori ciechi & passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

ISO Taps

Machos DIN UNC, Ranuras Rectas, GG • Para uso en fundición gris (GG), plasticos, bronces duros hasta 850N/mm² • Agujeros pasantes y ciegos • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  Size Ref.

UNC

DIN Taps

Carbide Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

T302

T303

D0402

D0408

HSSE

Ni + Blu

TiCN

Low Relief

Form C / 2.5 x P

2BX

drill ø

Item #

45 50 56 56 56 63 70 80 80 90 100

9 9 11 11 13 13 16 19 19 22 22

10 10 18 18 19 19 20 29 30 34 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 7.0

5 5 6 6 6 6 8 8 8 9 10

4 4 4 4 4 4 4 4 4 4 4

1.85 2.1 2.3 2.6 2.8 3.4 3.8 4.5 5.1 6.6 8.0

• • • • • • • • T302 0635 T302 0794 T302 0953

• • • • • • • • • • •

drill ø

Item #

100 110 110 110 125 140 160

24 28 30 32 34 34 38

8.0 9.0 11.0 12.0 14.0 18.0 18.0

6.2 7.0 9.0 9.0 11.0 14.5 14.5

8 10 12 12 14 17 17

4 4 4 4 4 4 4

9.4 10.8 12.2 13.5 16.5 19.5 22.2

• T302 1270 • T302 1588 T302 1905 • T302 2540

• • • • • • •

TPI 56 48 40 40 32 32 24 24 20 18 16

TPI

7/16 1/2 9/16 5/8 3/4 7/8 1

14 13 12 11 10 9 8

HSS Endmills

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

Tech Info

ISO VDI 3323

M 8

T302 T303 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

296

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • •

Reamers

1111 1270 1429 1588 1905 2223 2540

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

Size Ref.

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Gun, N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1 Tarauds DIN UNC, Gun, type N • Utilisation générale dans les aciers jusqu’à 1000 N/mm² • Trous débouchants • Profonceur jusqu’à 3 x d1

HSS Drills

DIN Maschi UNC, Gun, N • Maschio universale per materiali fino a circa 1000N/mm² • Fori passanti • Ideale per operazioni su macchine CN • Profondità fino a circa 3 x d1

T166

T167

D0402

D0406

HSSE

Brt

Blu

TiN

Form B / 4.5 x P

drill ø

Item #

56 48 40 40 32 32 24 24 20 18 16

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

45 50 56 56 56 63 70 80 80 90 100

9 9 11 11 13 13 16 19 19 22 22

10 10 18 18 19 19 20 29 30 34 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 7.0

5 5 6 6 6 6 8 8 8 9 10

2 2 2 3 3 3 3 3 3 3 3

1.85 2.1 2.3 2.6 2.8 3.4 3.8 4.5 5.1 6.6 8.0

T164 0218 T164 0251 T164 0284 T164 0318 T164 0351 T164 0417 T164 0483 T164 0549 T164 0635 T164 0794 T164 0953

• • • • • • • • • • •

T166 0218 T166 0251 T166 0284 T166 0318 T166 0351 T166 0417 T166 0483 T166 0549 T166 0635 T166 0794 T166 0953

T167 0218 T167 0251 T167 0284 T167 0318 T167 0351 T167 0417 T167 0483 T167 0549 T167 0635 T167 0794 T167 0953

Size Ref.

TPI

drill ø

Item #

7/16 1/2 9/16 5/8 3/4 7/8 1

14 13 12 11 10 9 8

100 110 110 110 125 140 160

24 28 30 32 34 34 38

8.0 9.0 11.0 12.0 14.0 18.0 18.0

6.2 7.0 9.0 9.0 11.0 14.5 14.5

8 10 12 12 14 17 17

3 3 3 3 4 4 4

9.4 10.8 12.2 13.5 16.5 19.5 22.2

T164 T164 1111 T164 1270 T164 1429 T164 1588 T164 1905 T164 2223 T164 2540

T165 • • • • • • •

T166 T166 1111 T166 1270 T166 1429 T166 1588 T166 1905 T166 2223 T166 2540

T167 T167 1111 T167 1270 T167 1429 T167 1588 T167 1905 T167 2223 T167 2540

TPI

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

T164 T165 T166 T167

Tech Info

ISO VDI 3323

• •

1111 1270 1429 1588 1905 2223 2540

Reamers

HSS Endmills

Size Ref.

UNC

T165 D0402

DIN Taps

Vc Page #: 483 

T164 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Entrada Corregida, N • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

• Optimal • Effective

297

Back to index Contents

DIN Taps UNC, Gun, Black Magic

Carbide Drills

Machos DIN UNC, Entrada Corregida, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

HSS Drills

Tarauds DIN UNC, Gun, type N • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

watch the video

ISO Taps

DIN Maschi UNC, Gun, Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori passanti fino 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

UNC

DIN Taps

0218 0284 0351 0417 0483 0635

TPI

drill ø

#2 #4 #6 #8 # 10 1/4

56 40 32 32 24 20

2.8

2.1

1.85

3.5

2.1

2.35

2.7

2.85

4.5

2.7

3.50

3.0

3.90

5.5

5.10

TPI

PM-HSSE V3 HARDLUBE

UNI Special Relief Form B / 4.5 x P 2BX

Item # T693 0218 T693 0284 T693 0351 T693 0417 T693 0483 T693 0635

Carbide Endmills

T693 D0410

HSS Endmills 5/16 3/8 1/2 5/8

18 16 13 11

drill ø

Item #

4.9

6.60

100

5.5

8.00

110

10.80

110

13.50

T693 0794 T693 0953 T693 1270 T693 1588

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

•

T693

• •

Tech Info

ISO VDI 3323

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • •

0794 0953 1270 1588

• • • •

Reamers

298

Size Ref.

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Gun, VA

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN UNC, Gun, type VA • Recommandés pour les inox et métaux à copeaux longs • Convient aux matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi UNC, Gun, VA • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

HSSE

Blu

TiCN

Special Relief

Form B / 4.5 x P

Item #

Item # • • • • T171 0351 T171 0417 T171 0483 • T171 0635 T171 0794 T171 0953

drill ø

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

56 48 40 40 32 32 24 24 20 18 16

2.8

2.1

1.85

2.8

2.1

3.5

2.7

2.3

3.5

2.7

2.6

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

6.0

4.9

4.5

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

8.0

• • • • T170 0351 T170 0417 T170 0483 • T170 0635 T170 0794 T170 0953

Size Ref.

TPI

drill ø

Item #

14 13 12 11 10 9 8

l1 100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

11.0

9.0

12.2

110

12.0

9.0

13.5

125

14.0.

11.0

16.5

140

18.0

14.5

19.5

160

18.0

14.5

22.2

T170 1111 T170 1270 T170 1429 T170 1588 T170 1905 T170 2223 T170 2540

T171 1111 T171 1270 T171 1429 T171 1588 T171 1905 T171 2223 T171 2540

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • • • • •

•

• • • •

• • • • • • • •

T170 T171

Reamers Tech Info

ISO VDI 3323

•

7/16 1/2 9/16 5/8 3/4 7/8 1

• • • • • •

1111 1270 1429 1588 1905 2223 2540

HSS Endmills

TPI

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

Size Ref.

UNC

T171 D0408

DIN Taps

Vc Page #: 483 

T170 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Entrada Corregida, VA • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

• Optimal • Effective

299

Back to index Contents

DIN Taps UNC, Gun, VA PM

Carbide Drills

• PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Through holes up to 3 x d1 Tarauds DIN UNC, Gun, type VA-PM • PM-HSSE V3 pour de meilleures performances • Recommandé pour les inox et les aciers haute résistance • Convient aux matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi UNC, Gun, VA PM • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori passanti fino 3 x d1

ISO Taps

Machos DIN UNC, Entrada Corregida, VA PM • PM-HSSE V3 para un mayor rendimiento • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

UNC

DIN Taps

0218 0284 0351 0417 0483 0635

TPI

drill ø

56 40 32 32 24 20

2.8

2.1

1.85

3.5

2.7

2.35

3.0

2.85

4.5

3.4

3.50

4.9

3.90

5.5

5.10

TPI

PM-HSSE V3 TiCN

VA PM Special Relief Form B / 4.5 x P 2BX

Item # T697 0218 T697 0284 T697 0351 T697 0417 T697 0483 T697 0635

Carbide Endmills

d1 #2 #4 #6 #8 # 10 1/4

T697 D0408

HSS Endmills l1

drill ø

Item #

4.9

6.60

100

5.5

8.00

110

10.80

110

13.50

T697 0794 T697 0953 T697 1270 T697 1588

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • •

•

T697

• •

Tech Info

ISO VDI 3323

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

18 16 13 11

•

5/16 3/8 1/2 5/8

• • • • • •

0794 0953 1270 1588

• • • •

Reamers

300

Size Ref.

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Gun, NH

Carbide Drills

• Use in harder short chipping materials up to 42 HRC • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1 Tarauds DIN UNC, Gun, type NH • Convient aux matériaux jusqu’à 42 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

301 HSS Drills

DIN Maschi UNC, Gun, NH • Maschio per materiali a truciolo corto temprati a 42 HRC • Fori passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

TPI

drill ø

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

56 48 40 40 32 32 24 24 20 18 16

2.8

2.1

1.85

2.8

2.1

3.5

2.7

2.3

3.5

2.7

2.6

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

6.0

4.9

4.5

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

8.0

PM-HSSE V3

Blu

TiAlN

Form B / 4.5 x P

Item #

• • • • • • • • T168 0635 T168 0794 T168 0953

• • • • • • • • T169 0635 T169 0794 T169 0953

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

•

• • • • • •

T168 T169

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

PM-HSSE V3

UNC

Size Ref.

T169 D0410

DIN Taps

Vc Page #: 483 

T168 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Entrada Corregida, NH • Uso en aceros hasta 42 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

• Optimal • Effective

301

Back to index Contents

DIN Taps UNC, Gun, NH

Carbide Drills

• Use in harder short chipping materials up to 42 HRC • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

DIN Maschi UNC, Gun, NH • Maschio per materiali a truciolo corto temprati a 42 HRC • Fori passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

Tarauds DIN UNC, Gun, type NH • Convient aux matériaux jusqu’à 42 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

Machos DIN UNC, Entrada Corregida, NH • Uso en aceros hasta 42 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

UNC

DIN Taps

Carbide Endmills

1111 1270 1429 1588 1905 2223 2540

TPI

drill ø

14 13 12 11 10 9 8

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

11.0

9.0

12.2

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

160

18.0

14.5

22.2

T169 D0410

PM-HSSE V3

Blu

TiAlN

Form B / 4.5 x P

Item #

• T168 1270 • T168 1588 T168 1905 • T168 2540

• T169 1270 • T169 1588 T169 1905 • T169 2540

HSS Endmills

d1 7/16 1/2 9/16 5/8 3/4 7/8* 1*

T168 D0402

Reamers 7

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

302

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

•

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

T168 T169

• • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Gun, H

Carbide Drills

• Use in harder materials up to 45 HRC • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1 Tarauds DIN UNC, Gun, type H • Convient aux matériaux jusqu’à 45 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi UNC, Gun, H • Maschio per materiali temprati fino a 45 HRC • Fori passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

drill ø

2.8

2.1

1.85

2.8

2.1

3.5

2.7

2.3

3.5

2.7

2.6

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

6.0

4.9

4.5

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

8.0

TPI 56 48 40 40 32 32 24 24 20 18 16

PM-HSS Co

Blu

TiCN

Low Relief

Form C / 3 x P

2BX

Item #

• • • • • • • • T172 0635 T172 0794 T172 0953

• • • • • • • • T666 0635 T666 0794 T666 0953

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • •

• •

•

• • • • • • • • • • • • • •

• • • • • •

• •

T172 T666

• • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

PM-HSS Co

UNC

Size Ref.

T666 D0408

DIN Taps

Vc Page #: 483 

T172 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Entrada Corregida, H • Uso en aceros hasta 45 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

• Optimal • Effective

303

Back to index Contents

DIN Taps UNC, Gun, H

Carbide Drills

• Use in harder materials up to 45 HRC • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

DIN Maschi UNC, Gun, H • Maschio per materiali temprati fino a 45 HRC • Fori passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

Tarauds DIN UNC, Gun, type H • Convient aux matériaux jusqu’à 45 HRC • Trous débouchants • Profondeur jusqu’à 3 x d1

Machos DIN UNC, Entrada Corregida, H • Uso en aceros hasta 45 HRC • Agujeros pasantes • Profundidades de hasta 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

UNC

DIN Taps

Carbide Endmills

drill ø

14 13 12 11 10 9 8 7

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

11.0

9.0

12.2

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

160

18.0

14.5

22.2

180

22.0

18.0

25.0

TPI

1111 7/16 1270 1/2 1429 9/16 1588 5/8 1905 3/4 2223 7/8* 1* 2540 2858 1.1/8*

T172

T666

D0402

D0408

PM-HSS Co

Blu

TiCN

Low Relief

Form C / 3 x P

2BX

Item #

T172 1111 T172 1270 T172 1429 T172 1588 T172 1905 T172 2223 T172 2540 T172 2858

T666 1111 T666 1270 T666 1429 T666 1588 T666 1905 T666 2223 T666 2540 T666 2858

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

304

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • •

• •

•

• • • • • • • • • • • • • •

• • • • • •

• • • •

T172 T666

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Spiral Flute, R15 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1

HSS Drills

Tarauds DIN UNC, Hélice 15°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 1.5 x d1 DIN Maschi UNC, Tagliente a Elica, R15 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Ideale per operazioni su macchine CN • Profondità fino a circa 1,5 x d1

HSSE

Brt

TiN

Brt

R15

Form C / 2.5 x P

TPI

drill ø

Item #

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

56 48 40 40 32 32 24 24 20 18 16

2.8

2.1

1.85

2.8

2.1

3.5

2.7

2.3

3.5

2.7

2.6

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

6.0

4.9

4.5

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

8.0

• • • • • • • • • • •

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • • • • • • • • • •

T255 T256 T257

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

T257 D0402

UNC

Size Ref.

T256 D0406

DIN Taps

Vc Page #: 482 

T255 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Helicoidal R15, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 1.5 x d1

305

Back to index Contents

DIN Taps UNC, Spiral Flute, R15 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1 Tarauds DIN UNC, Hélice 15°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 1.5 x d1

HSS Drills

DIN Maschi UNC, Tagliente a Elica, R15 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Ideale per operazioni su macchine CN • Profondità fino a circa 1,5 x d1

ISO Taps

Machos DIN UNC, Helicoidal R15, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 1.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

UNC

DIN Taps

Carbide Endmills

1111 1270 1429 1588 1905 2223 2540

T255

T256

T257

D0402

D0406

D0402

HSSE

Brt

TiN

Brt

R15

Form C / 2.5 x P

TPI

drill ø

Item #

14 13 12 11 10 9 8

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

11.0

9.0

12.2

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

160

18.0

14.5

22.2

• • • • • • •

HSS Endmills

d1 7/16 1/2 9/16 5/8 3/4 7/8 1

Reamers 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

• • •

T255 T256 T257

• • • • • • • • • • • • • • • • • • • •

Tech Info

306

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Spiral Flute, R40 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

HSS Drills

Tarauds DIN UNC, Hélice 40°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1 • Diamètre de queue et carré suivant DIN371 DIN Maschi UNC, Tagliente a Elica, R40 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Ideale per operazioni su macchine CN • Profondità fino a circa 1,5 x d1

T273 D0406

HSSE

Brt

Blu

TiN

R40

Form C / 2.5 x P

TPI

drill ø

Item #

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

56 48 40 40 32 32 24 24 20 18 16

2.8

2.1

1.85

2.8

2.1

3.5

2.7

2.3

3.5

2.7

2.6

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

6.0

4.9

4.5

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

8.0

T258 0218 • T258 0284 T258 0318 T258 0351 T258 0417 T258 0483 T258 0549 T258 0635 T258 0794 T258 0953

• • • • • • • • • • •

T260 0218 T260 0251 T260 0284 T260 0318 T260 0351 T260 0417 T260 0483 T260 0549 T260 0635 T260 0794 T260 0953

T273 0218 T273 0251 T273 0284 T273 0318 T273 0351 T273 0417 T273 0483 T273 0549 T273 0635 T273 0794 T273 0953

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • •

T258 T259 T260 T273

• • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

T260 D0402

UNC

Size Ref.

T259 D0402

DIN Taps

Vc Page #: 482 

T258 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

• Optimal • Effective

307

Back to index Contents

DIN Taps UNC, Spiral Flute, R40 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

HSS Drills

ISO Taps

Machos DIN UNC, Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

UNC

DIN Taps

Carbide Endmills

1111 1270 1429 1588 1905 2223 2540

T258

T259

T260

T273

D0402

D0406

HSSE

Brt

Blu

TiN

R40

Form C / 2.5 x P

TPI

drill ø

Item #

14 13 12 11 10 9 8

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

11.0

9.0

12.2

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

18.0

14.5

22.2

• • • • • • •

T260 1111 T260 1270 T260 1429 T260 1588 T260 1905 T260 2223 T260 2540

T273 1111 T273 1270 T273 1429 T273 1588 T273 1905 T273 2223

160

T258 1111 T258 1270 T258 1429 T258 1588 T258 1905 T258 2223 T258 2540

HSS Endmills

d1 7/16 1/2 9/16 5/8 3/4 7/8 1

Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • •

T258 T259 T260 T273

• • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

308

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Spiral Flute, R50 Black Magic

Carbide Drills

Machos DIN UNC, Helicoidal R50, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

watch the video

HSS Drills

Tarauds DIN UNC, Hélice 50°, Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

ISO Taps

DIN Maschi UNC, Tagliente a Elica, R50 Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori passanti fino 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

Vc Page #: 482 

T691 D0410 PM-HSSE V3 HARDLUBE

UNI R50 Form C / 2.5 x P 2BX

TPI

drill ø

0218 0284 0351 0417 0483 0635

#2 #4 #6 #8 # 10 1/4

56 40 32 32 24 20

2.8

2.1

1.85

3.5

2.7

2.35

2.85

4.5

3.4

3.50

4.9

3.90

5.5

5.10

T691 0218 T691 0284 T691 0351 T691 0417 T691 0483 T691 0635

Size Ref.

TPI

drill ø

Item #

5/16 3/8 1/2 5/8

18 16 13 11

4.9

6.60

100

5.5

8.00

110

10.80

110

13.50

T691 0794 T691 0953 T691 1270 T691 1588

UNC

DIN Taps

Item #

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

•

• •

• • • •

T691

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Reamers Tech Info

ISO VDI 3323

• • • • • • • • • • • • •

0794 0953 1270 1588

HSS Endmills

Carbide Endmills

Size Ref.

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

309

Back to index Contents

DIN Taps UNC, Spiral Flute, R45 VA DH

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Blind holes • Suitable for synchronous tapping in machine operations • Depths up to approx. 3 x d1 Tarauds DIN UNC, Hélice 45°, type VA-DH • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • Trous borgnes • Peut etre utilisé sur machines synchro adaptées • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi UNC, Tagliente a Elica, R45 VA DH • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori ciechi • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 3 x d1

ISO Taps

Machos DIN UNC, Helicoidal R45, VA DH • Adecuado para roscado sincronizado en agujeros profundos • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

UNC

DIN Taps

Carbide Endmills

56 48 40 40 32 32 24 24 20 18 16

Size Ref.

TPI

HSSE

Blu

TiCN

VA DH

R45

Form C / 2.5 x P

drill ø

Item #

9 9 5 6 6 7 8 10 10 13 15

10 10 18 18 19 19 20 29 30 34 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 7.0

5 5 6 6 6 6 8 8 8 9 10

2 2 2 3 3 3 3 3 3 3 3

1.85 2.1 2.3 2.6 2.8 3.4 3.8 4.5 5.1 6.6 8.0

• • T261 0284 • T261 0351 T261 0417 T261 0483 • T261 0635 T261 0794 T261 0953

T262 0218 • T262 0284 • T262 0351 T262 0417 T262 0483 • T262 0635 T262 0794 T262 0953

drill ø

Item #

3 3 3 3 4 4 4

9.4 10.8 12.2 13.5 16.5 19.5 22.2

T261 1111 T261 1270 • T261 1588 T261 1905 T261 2223 T261 2540

T262 1111 T262 1270 • T262 1588 T262 1905 T262 2223 T262 2540

HSS Endmills

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

T262 D0408

45 50 56 56 56 63 70 80 80 90 100

TPI

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

T261 D0402

P 7

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

310

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

8 10 12 12 14 17 17

•

6.2 7.0 9.0 9.0 11.0 14.5 14.5

• • • • • •

• •

•

T261 T262

8.0 9.0 11.0 12.0 14.0 18.0 18.0

•

ISO VDI 3323

• • • • •

Tech Info

14 13 12 11 10 9 8

15 18 20 20 25 28 32

• • • •

7/16 1/2 9/16 5/8 3/4 7/8 1

• • • • • • •

Reamers

1111 1270 1429 1588 1905 2223 2540

100 110 110 110 125 140 160

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Spiral Flute, R50 VA PM

Carbide Drills

• PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Blind holes up to 3 x d1 • Suitable for synchronous tapping in machine operations

HSS Drills

Tarauds DIN UNC, Hélice 50°, type VA-PM • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • PM-HSSE V3 pour plus de résistance que la série VA sandard • Trous borgnes • Peut etre utilisé sur les machines synchro adaptées • Profondeur jusqu’à 3 x d1 DIN Maschi UNC, Tagliente a Elica, R50 VA PM • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi fino 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

ISO Taps

Machos DIN UNC, Helicoidal R50, VA PM • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos profundos • Profundidad hasta 3 x d1

Vc Page #: 482  TPI

drill ø

56 40 32 32 24 20

2.8

2.1

1.85

3.5

2.7

2.35

3.0

2.85

4.5

4.3

3.50

4.9

3.90

5.5

5.10

TPI

R50 Form C / 2.5 x P 2BX

Item # T695 0218 T695 0284 T695 0351 T695 0417 T695 0483 T695 0635

UNC

d1 #2 #4 #6 #8 # 10 1/4

TiCN

VA PM

drill ø

Item #

4.9

6.60

100

5.5

8.00

110

10.80

110

13.50

T695 0794 T695 0953 T695 1270 T695 1588

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • •

•

• • •

• • • •

T695

•

ISO VDI 3323

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Reamers

l2 13

Tech Info

l1 90

•

18 16 13 11

•

5/16 3/8 1/2 5/8

•

0794 0953 1270 1588

• • • • • •

Size Ref.

HSS Endmills

Carbide Endmills

0218 0284 0351 0417 0483 0635

PM-HSSE V3

DIN Taps

Size Ref.

T695 D0408

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

311

Back to index Contents

DIN Taps 8UN, Spiral Flute, R40 VA

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Blind holes • Suitable for synchronous tapping in machine operations • Depths up to approx. 2.5 x d1 Tarauds DIN UNC, Hélice 40°, type VA • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • Trous borgnes • Peut etre utilisé sur machines synchro adaptées • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi 8UN, Tagliente a Elica, R40 VA • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori ciechi • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 2,5 x d1

ISO Taps

Machos DIN UN, Helicoidal R50, VA • Uso en aceros inoxidables y aceros de alta resistencia de hasta 1000N/mm² • Agujeros ciegos • Adecuado para roscado sincronizado. • Profundidad hasta 2.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

2858 3175 3493 3810 4128 4445 4763 5080

TPI

drill ø

1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

8 8 8 8 8 8 8 8

180

22.0

18.0

25.5

180

22.0

18.0

28.5

200

28.0

22.0

31.75

200

28.0

22.0

35.0

200

32.0

24.0

38.0

220

36.0

29.0

41.5

250

40.0

32.0

44.5

250

40.0

32.0

47.5

T263

T264

D0402

D0408

HSSE

Brt

TiCN

R40

Form C / 2.5 x P

Item #

T263 2858 T263 3175 T263 3493 T263 3810 T263 4128 T263 4445 T263 4763 T263 5080

T264 2858 T264 3175 T264 3493 T264 3810 T264 4128 T264 4445 T264 4763 T264 5080

HSS Endmills Reamers M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

312

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• •

• • • • • • • •

• • • • • •

• •

• • • • • •

T263 T264

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Spiral Flute, R40 NH

Carbide Drills

• Use in harder materials up to 42 HRC • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1 Tarauds DIN UNC, Hélice 40°, type NH • Convient aux matériaux jusqu’à 42 HRC • Trous débouchants • Profondeur jusqu’à 2.5 x d1

HSS Drills

DIN Maschi UNC, Tagliente a Elica, R40 NH • Maschio per materiali temprati fino a 42 HRC • Fori ciechi • Adatto per operazioni su macchina CN • Profondità fino a circa 2,5 x d1

TPI

drill ø

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

56 48 40 40 32 32 24 24 20 18 16

2.8

2.1

1.85

2.8

2.1

3.5

2.7

2.3

3.5

2.7

2.6

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

6.0

4.9

4.5

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

8.0

PM-HSSE V3

Blu

TiAlN

R40

Form C / 2.5 x P

Item #

• • • • • • • • T266 0635 T266 0794 T266 0953

• • • • • • • • T267 0635 T267 0794 T267 0953

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

• • • • • •

T266 T267

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

PM-HSSE V3

UNC

Size Ref.

T267 D0410

DIN Taps

Vc Page #: 482 

T266 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Helicoidal R40, NH • Uso en aceros de viruta corta, hasta 42 HRC • Agujeros ciegos • Profundidades de hasta 2,5 x d1

• Optimal • Effective

313

Back to index Contents

DIN Taps UNC, Spiral Flute, R40 NH

Carbide Drills

• Use in harder materials up to 42 HRC • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

HSS Drills

DIN Maschi UNC, Tagliente a Elica, R40 NH • Maschio per materiali temprati fino a 42 HRC • Fori ciechi • Adatto per operazioni su macchina CN • Profondità fino a circa 2,5 x d1

Tarauds DIN UNC, Hélice 40°, type NH • Convient aux matériaux jusqu’à 42 HRC • Trous débouchants • Profondeur jusqu’à 2.5 x d1

Machos DIN UNC, Helicoidal R40, NH • Uso en aceros de viruta corta, hasta 42 HRC • Agujeros ciegos • Profundidades de hasta 2,5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

UNC

DIN Taps

Carbide Endmills

1111 1270 1429 1588 1905 2223 2540

drill ø

14 13 12 11 10 9 8

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

11.0

9.0

12.2

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

160

18.0

14.5

22.2

TPI

7/16 1/2 9/16 5/8 3/4 7/8* 1*

T266

T267

D0402

D0410

PM-HSSE V3

Blu

TiAlN

R40

Form C / 2.5 x P

Item #

• T266 1270 • T266 1588 T266 1905 • T266 2540

• T267 1270 T267 1429 T267 1588 T267 1905 • T267 2540

HSS Endmills Reamers 3

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

314

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

T266 T267

• • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps UNC, Spiral Flute, R15 H

Carbide Drills

• Use in harder materials up to 45 HRC • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1 Tarauds DIN UNC, Hélice 15°, type H • Convient aux matériaux jusqu’à 45 HRC • Trous débouchants • Profondeur jusqu’à 1.5x d1

HSS Drills

DIN Maschi UNC, Tagliente a Elica, R15 H • Maschio per materiali temprati fino a 45 HRC • Fori ciechi • Adatto per operazioni su macchina CN • Profondità fino a circa 1,5 x d1

TPI

drill ø

#2 #3 #4 #5 #6 #8 #10 #12 1/4 5/16 3/8

56 48 40 40 32 32 24 24 20 18 16

2.8

2.1

1.85

2.8

2.1

3.5

2.7

2.3

3.5

2.7

2.6

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

6.0

4.9

4.5

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

8.0

PM-HSS Co

Blu

TiCN

R15

Form C / 3 x P

2BX

Item #

• • • • • • • • T265 0635 T265 0794 T265 0953

• • • • • • • • T667 0635 T667 0794 T667 0953

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • •

• •

•

• • • • • • • • • • • • • •

• • • • •

• •

T265 T667

• • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

PM-HSS Co

UNC

Size Ref.

T667 D0408

DIN Taps

Vc Page #: 483 

T265 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNC, Helicoidal R15, H • Uso en aceros de viruta corta, hasta 45 HRC • Agujeros ciegos • Profundidades de hasta 1,5 x d1

• Optimal • Effective

315

Back to index Contents

DIN Taps UNC, Spiral Flute, R15 H

Carbide Drills

• Use in harder materials up to 45 HRC • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1

HSS Drills

DIN Maschi UNC, Tagliente a Elica, R15 H • Maschio per materiali temprati fino a 45 HRC • Fori ciechi • Adatto per operazioni su macchina CN • Profondità fino a circa 1,5 x d1

Tarauds DIN UNC, Hélice 15°, type H • Convient aux matériaux jusqu’à 45 HRC • Trous débouchants • Profondeur jusqu’à 1.5x d1

Machos DIN UNC, Helicoidal R15, H • Uso en aceros de viruta corta, hasta 45 HRC • Agujeros ciegos • Profundidades de hasta 1,5 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

UNC

DIN Taps

Carbide Endmills

1111 7/16 1270 1/2 1429 9/16 1588 5/8 1905 3/4 2223 7/8* 1* 2540 2858 1.1/8*

drill ø

14 13 12 11 10 9 8 7

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

11.0

9.0

12.2

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

160

18.0

14.5

22.2

180

22.0

18.0

25.0

T667 D0408

PM-HSS Co

Blu

TiCN

R15

Form C / 3 x P

2BX

Item #

T265 1111 T265 1270 T265 1429 T265 1588 T265 1905 T265 2223 T265 2540 T265 2858

T667 1111 T667 1270 T667 1429 T667 1588 T667 1905 T667 2223 T667 2540 T667 2858

HSS Endmills

TPI

T265 D0402

Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

316

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * HSSE > 3/4

• •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • •

• •

•

• • • • • • • • • • • • • •

• • • • •

• • • •

T265 T667

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps UNJ, Spiral Flute, R15 Ti

Tarauds DIN UNJ, Hélice 15°, type Ti • Recommandé pour les bases Titanes • Géométrie de coupe unique pour une bonne évacuation copeaux • Microfinition optimisée pour une fiabilité de processus optimale et une excellente qualité de filetage • Trous borgnes jusqu’à 1.5 x d1

Carbide Drills

Machos DIN UNJ, Helicoidal R15, Ti • Para aleaciones con base de titanio • Geometría de corte única para una extración de virutas altamente eficiente • Optimizado para micro-acabado una confiabilidad óptima del proceso y una excelente calidad de rosca • Agujeros ciegos hasta 1.5 x d1

HSS Drills

TiCN

Ti R15 Form C / 3 x P

Item #

#4 #6 #8 #10 1/4 5/16 3/8 1/2

40 32 32 24 20 18 16 13

3.5

2.7

4.0

3.0

4.5

3.4

6.0

4.9

7.0

5.5

8.0

6.2

100

10.0

7.0

110

9.0

7.0

T790 0284 T790 0351 T790 0417 T790 0483 T790 0635 T790 0794 T790 0953 T790 1270

7.0

5.5

28 24 24 13

8.0

6.2

100

10.0

7.0

110

9.0

7.0

T791 T791 0635 T791 0794 T791 0953 T791 1270

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Available on request as special manufacture. Subject to lead time & MOQ.

• • • • • • • • • •

• •

T790 T791

• •

ISO VDI 3323

Tech Info

Reamers

1/4 5/16 3/8 1/2

UNJ

Carbide Endmills

DIN Taps

3BX

TPI

UNJF

0635 0794 0953 1270

PM-HSS Co

UNJC

0284 0351 0417 0483 0635 0794 0953 1270

D0408

HSS Endmills

Vc Page #: 483  Size Ref.

T790

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi UNJ, Tagliente a Elica, R15 Ti • Per leghe a base di Titanio • Unica geometria di del tagliente per un efficiente evaquazione truciolo • Processo di micro finitura del tagliente ottimazzata per ottenere un risultato di eccellente qualità • Fori ciechi fino a circa 1,5 x d1

• Optimal • Effective

317

Back to index Contents

DIN Taps UNJ, Spiral Flute, L12 Ti

Carbide Drills

Machos DIN UNJ, Helicoidal, L12 Ti • Para aleaciones con base de titanio • Geometría de corte única para una extración de virutas altamente eficiente • Optimizado para micro-acabado una confiabilidad óptima del proceso y una excelente calidad de rosca • Agujeros ciegos hasta 1.5 x d1

HSS Drills

Tarauds DIN UNJ, Hélice à gauche 12°, type Ti • Recommandé pour les bases Titanes • Géométrie de coupe unique pour une bonne évacuation copeaux • Microfinition optimisée pour une fiabilité de processus optimale et une excellente qualité de filetage • Trous débouchants jusqu’à 1.5 x d1 DIN Maschi UNJ, Tagliente a Elica, L12 Ti • Per leghe a base di Titanio • Unica geometria di del tagliente per un efficiente evaquazione truciolo • Processo di micro finitura del tagliente ottimazzata per ottenere un risultato di eccellente qualità • Fori ciechi fino a circa 1,5 x d1

ISO Taps Tool Holding Vc Page #: 483 

HSS Endmills Reamers

drill ø

0284 0351 0417 0483 0635 0794 0953 1111 1270 1588 1905 2223 2540

#4 #6 #8 #10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1

40 32 32 24 20 18 16 14 13 11 10 9 8

3.5

2.7

2.3

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

160

22.0

18.0

22.2

4.9

3.8

5.5

5.1

6.2

6.6

100

6.2

9.4

110

10.8

110

12.2

110

13.5

125

16.5

140

14.5

19.5

160

22.2

UNJF

0483 0635 0794 0953 1111 1270 1429 1588 1905 2223 2540

#10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

32 28 24 24 20 20 18 18 16 14 12

Tech Info

ISO VDI 3323

T786 T787

M 8

PM-HSS Co TiCN

Ti L12 Form B / 4.5 x P 3BX

Item # T786 0284 T786 0351 T786 0417 T786 0483 T786 0635 T786 0794 T786 0953 T786 1111 T786 1270 T786 1588 T786 1905 T786 2223 T786 2540 T787 T787 0483 T787 0635 T787 0794 T787 0953 T787 1111 T787 1270 T787 1429 T787 1588 T787 1905 T787 2223 T787 2540 N

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

318

D0408

S Titanium & Super Alloys H Hard Materials

*Available on request as special manufacture. Subject to lead time & MOQ.

• • • • • • • • • •

Carbide Endmills

TPI

• •

UNJ

DIN Taps

UNJC

• •

Size Ref.

T786

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

• Optimal • Effective

Contents

Back to index

DIN Taps UNJ, Spiral Flute, R10 Ni

Carbide Drills

• For Nickel alloys / age-hardened super alloys >1150M/mm² • Reinforced cutting geometry • Blind or through holes • Depths up to approx. 1.5 x d1 Tarauds DIN UNJ, Hélice 10°, type Ni • Recommandé pour les bases Nickel >1150N/mm² • Géométrie de coupe renforcée • Trous borgnes et débouchants • Profondeur jusqu’à 1.5 x d1

HSS Drills

319

DIN Maschi UNJ, Tagliente a Elica, R10 Ni • Ideale per leghe Nickel / Super leghe invecchiate >1150/mm² • Geometria del tagliente rinforzata • Fori ciechi & passanti • Profondità fino a circa 1,5 x d1

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  d2

drill ø

0284 0351 0417 0483 0635 0794 0953 1111 1270 1588 1905 2223 2540

#4 #6 #8 #10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1

40 32 32 24 20 18 16 14 13 11 10 9 8

3.5

2.7

2.3

4.0

3.0

2.8

4.5

3.4

6.0

4.9

3.8

7.0

5.5

5.1

8.0

6.2

6.6

100

10.0

7.0

100

8.0

6.2

9.4

110

9.0

7.0

10.8

110

12.0

9.0

13.5

125

14.0

11.0

16.5

140

18.0

14.5

19.5

160

22.0

18.0

22.2

4.9

3.8

5.5

5.1

6.2

6.6

100

6.2

9.4

110

10.8

110

12.2

110

13.5

125

16.5

140

14.5

19.5

160

22.2

UNJF

0483 0635 0794 0953 1111 1270 1429 1588 1905 2223 2540

#10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

32 28 24 24 20 20 18 18 16 14 12

ISO VDI 3323

M 8

Item # T794 0284 T794 0351 T794 0417 T794 0483 T794 0635 T794 0794 T794 0953 T794 1111 T794 1270 T794 1588 T794 1905 T794 2223 T794 2540 T795 T795 0483 T795 0635 T795 0794 T795 0953 T795 1111 T795 1270 T795 1429 T795 1588 T795 1905 T795 2223 T795 2540 N

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • •

T794 T795 S Titanium & Super Alloys H Hard Materials

*Available on request as special manufacture. Subject to lead time & MOQ.

UNJ

3BX

DIN Taps

Form C / 3 x P

Carbide Endmills

Ni R10

HSS Endmills

TPI

TiCN

Reamers

UNJC

PM-HSS Co

Tech Info

Size Ref.

†

T794 D0408

Tool Holding

ISO Taps

Machos DIN UNJ, Helicoidal R10, Ni • Para aleaciones de níquel y súper aleaciones endurecidas > 1150N/mm² • Geometría de corte reforzada • Agujeros ciegos o pasantes • Profundidades hasta 1.5 x d1

• Optimal • Effective

319

Back to index Contents

DIN Taps UNF, Gun, N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1 Tarauds DIN UNF, Gun, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi UNF, Gun, N • Maschio universale per materiali fino a circa 1000N/mm² • Fori passanti • Ideale per operazioni su macchine CN • Profondità fino a circa 3 x d1

ISO Taps

Machos DIN UNF, Entrada Corregida, N • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Application Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

UNF

DIN Taps

Carbide Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

TPI

T702

T175

D0402

D0406

HSSE

Brt

Blue

TiN

Form B / 4.5 x P

Form C / 2.5 x P

Form B / 4.5 x P

drill ø

Item #

9 9 11 11 13 13 16 19 19 22 20

18 18 20 21 25 30 30 35 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 8.0

5 5 6 6 6 6 8 8 8 9 11

2 2 2 3 3 3 3 3 3 3 3

1.9 2.1 2.35 2.65 2.9 3.5 4.1 4.6 5.5 6.9 8.5

T173 0218 • T173 0284 • T173 0351 T173 0417 T173 0483 • T173 0635 T173 0794 T173 0953

• • • • • • • • • • •

T702 0218 • T702 0284 • T702 0351 T702 0417 T702 0483 • T702 0635 T702 0794 T702 0953

T175 0218 • T175 0284 T175 0318 T175 0351 T175 0417 T175 0483 • T175 0635 T175 0794 T175 0953

drill ø

Item #

3 3 3 3 4 4 4

9.8 11.5 12.8 14.5 17.5 20.5 23.5

T173 1111 T173 1270 T173 1429 T173 1588 T173 1905 T173 2223 T173 2540

Item # • • • • • • •

T175 1111 T175 1270 T175 1429 T175 1588 T175 1905 T175 2223 T175 2540

HSS Endmills

64 56 48 44 40 36 32 28 28 24 24

T174 D0402

45 50 56 56 56 63 70 80 80 90 100

TPI

#2 #3 #4 #5 #6 #8 #10 #12 1/4 5/16 3/8

T173 D0402

100 110 110 110 125 140 160

8.0 9.0 11.0 12.0 14.0 18.0 18.0

6.2 7.0 9.0 9.0 11.0 14.5 14.5 M

8 10 12 12 14 17 17 K

Item #

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

T173 T174 T702 T175

ISO VDI 3323

24 28 32 32 34 34 38

• • • •

Tech Info

20 20 18 18 16 14 12

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • •

7/16 1/2 9/16 5/8 3/4 7/8 1

• • • • • • • • • • • • • • • • • • • • • • • • • •

Reamers

320

1111 1270 1429 1588 1905 2223 2540

• •

Size Ref.

• Optimal • Effective

Contents

Back to index

DIN Taps UNF, Gun, Black Magic

Carbide Drills

Machos DIN UNF, Entrada Corregida, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

• Universal high performance tapping • PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Suitable for synchronous tapping in machine operations • Through holes up to 3 x d1

watch the video

HSS Drills

Tarauds DIN UNF, Gun, Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  TPI

drill ø

48 44 40 36 32 28

3.5

2.7

2.35

3.5

2.7

2.65

4.0

3.0

2.9

4.5

3.4

3.5

6.0

4.9

4.1

7.0

5.5

TPI

UNI Special Relief Form B / 4.5 x P 2BX

Item # T694 0284 • T694 0351 T694 0417 T694 0483 T694 0635

UNF

d1 #4 #5 #6 #8 # 10 1/4

HARDLUBE

5/16 3/8 1/2 5/8

24 24 20 18

drill ø

Item #

4.9

6.90

T694 0794 T694 0953 T694 1270 T694 1588

5.5

8.50

11.50

100

14.50

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

•

• •

• • • •

T694

l2 22

100

ISO VDI 3323

l1 90

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Tech Info

0794 0953 1270 1588

• • • • • • • • • • • • • •

Size Ref.

Reamers

HSS Endmills

Carbide Endmills

0284 0318 0351 0417 0483 0635

PM-HSSE V3

DIN Taps

Size Ref.

T694 D0410

Tool Holding

ISO Taps

DIN Maschi UNF, Gun, Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Adatto per maschiatura sincronizzata su macchina CN • Fori passanti fino 3 x d1

321

Back to index Contents

DIN Taps UNF, Gun, VA

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1 Tarauds DIN UNF, Gun, type VA • Use in stainless steels and high strength steels up to 1000N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

DIN Maschi UNF, Gun, VA • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

ISO Taps

Machos DIN UNF, Entrada Corregida, VA • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

UNF

DIN Taps

Carbide Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

TPI

HSSE

Blu

TiCN

Special Relief

Form B / 4.5 x P

Item #

• • T176 0284 • T176 0351 T176 0417 T176 0483 • T176 0635 T176 0794 T176 0953

• • • • • • T177 0483 • T177 0635 T177 0794 T177 0953

drill ø

9 9 11 11 13 13 16 19 19 22 20

18 18 20 21 25 30 30 35 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 8.0

5 5 6 6 6 6 8 8 8 9 11

2 2 2 3 3 3 3 3 3 3 3

1.9 2.1 2.35 2.65 2.9 3.5 4.1 4.6 5.5 6.9 8.5

drill ø

Item #

3 3 3 3 4 4 4

9.8 11.5 12.8 14.5 17.5 20.5 23.5

T176 1111 T176 1270 T176 1429 T176 1588 T176 1905 T176 2223 T176 2540

T177 1111 T177 1270 T177 1429 T177 1588 T177 1905 T177 2223 T177 2540

HSS Endmills

64 56 48 44 40 36 32 28 28 24 24

T177 D0408

45 50 56 56 56 63 70 80 80 90 100

TPI

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

T176 D0402

8.0 9.0 11.0 12.0 14.0 18.0 18.0

M 8

8 10 12 12 14 17 17 K

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

322

6.2 7.0 9.0 9.0 11.0 14.5 14.5

• • • • • • • • •

•

T176 T177

24 28 32 32 34 34 38

ISO VDI 3323

• • • •

Tech Info

100 110 110 110 125 140 160

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

20 20 18 18 16 14 12

•

7/16 1/2 9/16 5/8 3/4 7/8 1

• • • • • • • •

Reamers

1111 1270 1429 1588 1905 2223 2540

• • • • • •

Size Ref.

• Optimal • Effective

Contents

Back to index

DIN Taps UNF, Gun, VA PM

Carbide Drills

• PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Through holes up to 3 x d1

HSS Drills

Tarauds DIN UNF, Gun, type VA-PM • PM-HSSE V3 pour de meilleures performances • Recommandé pour les inox et les aciers haute résistance • Convient aux matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi UNF, Gun, VA PM • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori passante fino 3 x d1

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483 

TiCN

VA PM Special Relief Form B / 4.5 x P 2BX

TPI

drill ø

#4 #6 #8 # 10 1/4

48 40 36 32 28

3.5

2.7

2.35

4.0

3.0

2.9

4.5

3.4

3.5

6.0

4.9

4.1

7.0

5.5

TPI

drill ø

Item #

5/16 3/8 1/2 5/8

24 24 20 18

4.9

6.90

T698 0794 T698 0953 T698 1270 T698 1588

Item #

UNF

T698 0284 T698 0351 T698 0417 T698 0483 T698 0635

5.5

8.50

11.50

100

14.50

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

• • • • •

• •

• • • •

T698

•

ISO VDI 3323

• Optimal • Effective

Tech Info

90 100

•

0794 0953 1270 1588

• • • • • •

Size Ref.

Reamers

HSS Endmills

Carbide Endmills

0284 0351 0417 0483 0635

PM-HSSE V3

DIN Taps

Size Ref.

T698 D0408

Tool Holding

ISO Taps

• Machos DIN UNF, Entrada Corregida, VA PM • PM-HSSE V3 para un mayor rendimiento • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

323

Back to index Contents

DIN Taps UNF, Spiral Flute, R15 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1 Tarauds DIN UNF, Hélice 15°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 1.5 x d1

HSS Drills

DIN Maschi UNF, Tagliente a Elica, R15 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Ideale per operazioni su macchine CN • Profondità fino a circa 1,5 x d1

ISO Taps

Machos DIN UNF, Helicoidal R15, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 1.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

UNF

DIN Taps

Carbide Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

TPI

Brt

N R15 Form C / 2.5 x P 2B

drill ø

9 9 5 6 6 7 8 10 10 13 15

18 18 20 21 25 30 30 35 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 8.0

5 5 6 6 6 6 8 8 8 9 11

2 2 2 3 3 3 3 3 3 3 3

1.9 2.1 2.35 2.65 2.9 3.5 4.1 4.6 5.5 6.9 8.5

• • • • • • • • • • •

drill ø

3 3 3 3 4 4 4

9.8 11.5 12.8 14.5 17.5 20.5 23.5

Item # • • • • • • •

Item #

HSS Endmills

64 56 48 44 40 36 32 28 28 24 24

HSSE

45 50 56 56 56 63 70 80 80 90 100

TPI

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

T274 D0402

8.0 9.0 11.0 12.0 14.0 18.0 18.0

P 1

6.2 7.0 9.0 9.0 11.0 14.5 14.5

8 10 12 12 14 17 17

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

T274

15 18 20 20 25 28 32

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

ISO VDI 3323

• •

Tech Info

100 110 110 110 125 140 160

• • • • • •

20 20 18 18 16 14 12

•

7/16 1/2 9/16 5/8 3/4 7/8 1

• • • •

Reamers

324

1111 1270 1429 1588 1905 2223 2540

•

Size Ref.

• Optimal • Effective

Contents

Back to index

DIN Taps UNF, Spiral Flute, R40 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

HSS Drills

Tarauds DIN UNF, Hélice 40°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1 • Diamètre de queue et carré suivant DIN371 DIN Maschi UNF, Tagliente a Elica, R40 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Ideale per operazioni su macchine CN • Profondità fino a circa 1,5 x d1

64 56 48 44 40 36 32 28 28 24 24

TPI

Blu

R40

Form C / 2.5 x P

Item #

• • T275 0284 T275 0318 T275 0351 T275 0417 T275 0483 T275 0549 T275 0635 T275 0794 T275 0953

• • • • T701 0351 T701 0417 T701 0483 • T701 0635 T701 0794 T701 0953

drill ø

45 50 56 56 56 63 70 80 80 90 100

9 9 5 6 6 7 8 10 10 13 15

18 18 20 21 25 30 30 35 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 8.0

5 5 6 6 6 6 8 8 8 9 11

2 2 2 3 3 3 3 3 3 3 3

1.9 2.1 2.35 2.65 2.9 3.5 4.1 4.6 5.5 6.9 8.5

drill ø

Item #

3 3 3 3 4 4 4

9.8 11.5 12.8 14.5 17.5 20.5 23.5

T275 1111 T275 1270 T275 1429 T275 1588 T275 1905 T275 2223 T275 2540

T701 1111 • • • • • •

TPI

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

HSSE

Brt

100 110 110 110 125 140 160

8.0 9.0 11.0 12.0 14.0 18.0 18.0

6.2 7.0 9.0 9.0 11.0 14.5 14.5

8 10 12 12 14 17 17

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • •

•

• •

• • • •

• • • • • • • •

T275 T701

ISO VDI 3323

15 18 20 20 25 28 32

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

Tech Info

20 20 18 18 16 14 12

• •

7/16 1/2 9/16 5/8 3/4 7/8 1

• • • • • • • •

1111 1270 1429 1588 1905 2223 2540

• •

Size Ref.

Reamers

HSS Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

HSSE

UNF

Size Ref.

T701 D0402

DIN Taps

Vc Page #: 482 

T275 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNF, Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

• Optimal • Effective

325

Back to index Contents

DIN Taps UNF, Spiral Flute, R50 Black Magic

Carbide Drills

Machos DIN UNF, Helicoidal R50, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

HSS Drills

Tarauds DIN UNF, Hélice 50°, Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

watch the video

DIN Maschi UNF, Tagliente a Elica, R50 Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Adatto per maschiatura sincronizzata su macchina CN • Fori ciechi fino 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482 

T692 D0410 PM-HSSE V3 HARDLUBE

UNI R50 Form B / 4.5 x P 2BX

TPI

drill ø

0284 0351 0417 0483 0635

#4 #6 #8 # 10 1/4

48 40 36 32 28

3.5

2.7

2.40

2.95

4.5

3.4

3.50

4.9

4.10

5.5

5.50

T692 0284 T692 0351 T692 0417 T692 0483 T692 0635

Size Ref.

TPI

drill ø

Item #

5/16 3/8 1/2 5/8

24 24 20 18

4.9

6.90

5.5

8.50

100

11.50

100

14.50

T692 0794 T692 0953 T692 1270 T692 1588

Size Ref.

Item #

UNF

DIN Taps

Carbide Endmills 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • •

• • • •

•

Tech Info

T692

• •

Reamers

ISO VDI 3323

• • • •

HSS Endmills

326

0794 0953 1270 1588

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

DIN Taps UNF, Spiral Flute, R45 VA DH

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Blind holes • Suitable for synchronous tapping in machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN UNF, Hélice 45°, type VA-DH • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • Trous borgnes • Peut etre utilisé sur machines synchro adaptées • Profondeur jusqu’à 3 x d1 DIN Maschi UNF, Tagliente a Elica, R45 VA DH • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori ciechi • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 3 x d1

64 56 48 44 40 36 32 28 28 24 24

TPI

TiCN

VA DH

R45

Form C / 2.5 x P

Item #

• • • • T276 0351 T276 0417 T276 0483 • T276 0635 T276 0794 T276 0953

• • • • • • • • T277 0635 T277 0794 T277 0953

drill ø

45 50 56 56 56 63 70 80 80 90 100

9 9 5 6 6 7 8 10 10 13 15

18 18 20 21 25 30 30 35 35

2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 7.0 8.0 10.0

2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 5.5 6.2 8.0

5 5 6 6 6 6 8 8 8 9 11

2 2 2 3 3 3 3 3 3 3 3

1.9 2.1 2.35 2.65 2.9 3.5 4.1 4.6 5.5 6.9 8.5

drill ø

Item #

3 3 3 3 4 4 4

9.8 11.5 12.8 14.5 17.5 20.5 23.5

T276 1111 T276 1270 • T276 1588 T276 1905 T276 2223 T276 2540

T277 1111 T277 1270 • T277 1588 T277 1905 T277 2223 T277 2540

TPI

#2 #3 #4 #5 #6 #8 # 10 # 12 1/4 5/16 3/8

HSSE

Blu

8.0 9.0 11.0 12.0 14.0 18.0 18.0

P 7

6.2 7.0 9.0 9.0 11.0 14.5 14.5 M

8 10 12 12 14 17 17 K

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • •

• •

•

• • • • •

• • • • • • •

T276 T277

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

Tech Info

ISO VDI 3323

15 18 20 20 25 28 32

•

100 110 110 110 125 140 160

•

20 20 18 18 16 14 12

•

7/16 1/2 9/16 5/8 3/4 7/8 1

•

1429 1270 1429 1588 1905 2223 2540

• • • •

Size Ref.

Reamers

HSS Endmills

0218 0251 0284 0318 0351 0417 0483 0549 0635 0794 0953

HSSE

UNF

Size Ref.

T277 D0408

DIN Taps

Vc Page #: 482 

T276 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN UNF, Helicoidal R45, VA DH • Adecuado para roscado sincronizado en agujeros profundos • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos • Profundidades hasta 3 x d1.

• Optimal • Effective

327

Back to index Contents

DIN Taps UNF, Spiral, R50 VA PM

Carbide Drills

• PM-HSSE V3 offers superior tool life • Use in stainless steels and high strength steels up to 850N/mm² • Blind holes up to 3 x d1 • Suitable for synchronous tapping in machine operations

HSS Drills

Tarauds DIN UNF, Hélice 50°, type VA-PM • Recommandé pour les inox et aciers alliés jusqu’à 850N/mm² • PM-HSSE V3 pour plus de résistance que la série VA sandard • Trous borgnes • Peut etre utilisé sur les machines synchro adaptées • Profondeur jusqu’à 3 x d1 DIN Maschi UNF, Tagliente a Elica, R50 VA PM • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Fori ciechi fino 3 x d1 • Adatto per maschiatura sincronizzata su macchina CN

ISO Taps

Machos DIN UNF, Helicoidal R50, VA PM • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros ciegos profundos • Profundidad hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482 

T696 D0408 PM-HSSE V3 TiCN

VA PM R50 Form C / 2.5 x P 2BX

TPI

drill ø

0284 0351 0417 0483 0635

#4 #6 #8 # 10 1/4

48 40 36 32 28

3.5

2.7

2.35

4.0

3.0

2.9

4.5

3.4

3.5

6.0

4.9

4.1

7.0

5.5

T696 0284 T696 0351 T696 0417 T696 0483 T696 0635

Size Ref.

TPI

drill ø

Item #

4.9

6.90

5.5

8.50

100

11.50

100

14.50

T696 0794 T696 0953 T696 1270 T696 1588

Size Ref.

Item #

UNF

DIN Taps

Carbide Endmills HSS Endmills 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • •

•

T696

• • •

Tech Info

ISO VDI 3323

•

24 24 20 18

• • • • • •

5/16 3/8 1/2 5/8

• • • •

Reamers

328

0794 0953 1270 1588

• Optimal • Effective

Contents

Back to index

DIN Taps G (BSPF), Straight Flute, N

Carbide Drills

• General Purpose use in materials up to approx. 1000 N/mm² • Through & blind holes • Suitable for machine operations • Depths up to approx. 1 x d1

HSS Drills

Tarauds DIN G (BSPF), Goujure Droite, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Pour trous borgnes et débouchants • Profondeur jusqu’à 1 x d1 DIN Maschi G (BSPF), Elica dritta, N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi & passanti • Ideale per operazioni su macchine CN • Profondità fino a circa 1 x d1

TPI

drill ø

28 19 19 14 14 14 14 11 11 11 11 11 11 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

170

28.0

22.0

35.5

170

32.0

24.0

39.5

180

36.0

29.0

42.0

190

36.0

29.0

45.5

190

40.0

32.0

51.0

220

45.0

35.0

57.0

HSSE

Brt

TiN

Form C / 2.5 x P

ISO 228

Item #

T304 0973 T304 1316 T304 1666 T304 2096 T304 2291 T304 2644 T304 3020 T304 3325 T304 3790 T304 4191 • T304 4780 • •

T305 0973 T305 1316 T305 1666 T305 2096 T305 2291 T305 2644 T305 3020 T305 3325 • • • • • •

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • •

• • • • • • • •

• • • • • • • • • • • • • • • •

T304 T305

• •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0973 1316 1666 2096 2291 2644 3020 3325 3790 4191 4432 4780 5375 5961

HSSE

d1 G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1 G 1-1/8 G 1-1/4 G 1-3/8 G 1-1/2 G 1-3/4 G2

Size Ref.

T305 D0406

DIN Taps

Vc Page #: 484 

T304 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN G (BSPF), Ranuras Rectas, N • Uso general, Adecuado para materiales de hasta 1000N/mm² • Agujeros pasantes y ciegos • Profundidades hasta 1 x d1

• Optimal • Effective

329

Back to index Contents

DIN Taps G (BSPF), Straight Flute, GG

Carbide Drills

• Use in grey cast iron (GG), brittle plastics, hard bronzes to a hardness of 850 N/mm² • Through & blind holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN G (BSPF), Goujure Droite, type GG • Récommandé pour les fontes grises (GG), les plastiques et bronzes durs jusqu’à 850 N/mm² • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi G (BSPF), Elica dritta, GG • Ideale per ghisa grigia (GG), plastiche fragili, bronzo indurito fino a una durezza di 850 N/mm² • Fori ciechi & passanti • Adatto per operazioni su macchina CN • Profondità fino a circa 3 x d1

ISO Taps

Machos DIN G (BSPF), Ranuras Rectas, GG • HSSE, para uso en fundición gris (GG) • VHM, para uso en Al> 10% Si y fundición (GGG) • Agujeros pasantes y ciegos • Profundidades de hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  Size Ref.

DIN Taps

Carbide Endmills

0973 1316 1666 2096 2291 2644 3020 3325

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

T306

T307

D0402

D0408

HSSE

Ni + Blu

TiCN

Low Relief

Form C / 2.5 x P

ISO 228

Item #

T306 0973 T306 1316 T306 1666 T306 2096 T306 2291 T306 2644 T306 3020 T306 3325

T307 0973 T307 1316 T307 1666 T307 2096 T307 2291 T307 2644 T307 3020 T307 3325

HSS Endmills Reamers 2

M 8

T306 T307 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

330

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps G (BSPF), Gun, N

Carbide Drills

• General Purpose use in materials up to approx. 1000 N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN G (BSPF), Gun, type N • Utilisations générales • Convient aux matériaux jusqu’à 1000N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi G (BSPF), Gun, N • Maschio universale per materiali fino a circa 1000N/mm² • Fori passanti • Ideale per operazioni su macchine CN • Profondità fino a circa 3 x d1

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

D0406

HSSE

Brt

Blu

TiN

Form B / 4.5 x P

ISO 228

Item #

T178 0973 T178 1316 T178 1666 T178 2096 T178 2291 T178 2644 T178 3020 T178 3325

T179 0973

T180 0973 T180 1316 T180 1666 T180 2096 T180 2291 T180 2644 T180 3020 T180 3325

T179 2291

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals * Not available once current stock is depleted

S Titanium & Super Alloys H Hard Materials

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • • • • • • • • • • • • • • • • • •

T178 T179 T180

• • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0973 1316 1666 2096 2291 2644 3020 3325

T180

D0402

Size Ref.

T179*

DIN Taps

Vc Page #: 483 

T178 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN G (BSPF), Entrada Corregida, N • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes • Profundidades hasta 3 x d1

• Optimal • Effective

331

Back to index Contents

DIN Taps G (BSPF), Gun, Black Magic

Carbide Drills

HSS Drills

Tarauds DIN G (BSPF), Gun, type Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

Machos DIN G (BSPF), Entrada Corregida, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

watch the video

DIN Maschi G (BSPF), Gun, Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Adatto per maschiatura sincronizzata su macchina CN • Fori passanti fino 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

0973 1316 1666 2096 2291 2644 3020 3325

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

T700 D0410 PM-HSSE V3 HARDLUBE

UNI Special Relief Form B / 4.5 x P ISO 228

Item # T700 0973 T700 1316 T700 1666 T700 2096 T700 2291 T700 2644 T700 3020 T700 3325

HSS Endmills Reamers 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • •

• • • •

•

• •

T700

• • • •

Tech Info

332

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

DIN Taps G (BSPF), Gun, VA

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN G (BSPF), Gun, type VA • Use in stainless steels and high strength steels up to 1000N/mm² • Through holes • Suitable for machine operations • Depths up to approx. 3 x d1 DIN Maschi G (BSPF), Gun, VA • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori passanti • Adatto per operazioni su macchine CN • Profondità fino a circa 3 x d1

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

HSSE

Blu

TiCN

Special Relief

Form B / 4.5 x P

ISO 228

Item #

T181 0973 T181 1316 T181 1666 T181 2096 T181 2291 T181 2644 T181 3020 T181 3325

T182 0973 T182 1316 T182 1666 T182 2096 T182 2291 T182 2644 T182 3020 T182 3325

P 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • •

•

• • • • • •

• • • • • • • • •

• • • •

• • • • • • • •

T181 T182

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0973 1316 1666 2096 2291 2644 3020 3325

HSSE

Size Ref.

T182 D0408

DIN Taps

Vc Page #: 483 

T181 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN G (BSPF), Entrada Corregida, VA • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1.

• Optimal • Effective

333

Back to index Contents

DIN Taps G (BSPF), Gun, VA PM

Carbide Drills

Machos DIN G (BSPF), Entrada Corregida, VA PM • PM-HSSE V3 para un mayor rendimiento • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros Pasantes • Profundidades hasta 3 x d1

HSS Drills

Tarauds DIN G (BSPF), Gun, type VA-PM • PM-HSSE V3 pour de meilleures performances • Recommandé pour les inox et les aciers haute résistance • Convient aux matériaux jusqu’à 850N/mm² • Trous débouchants • Profondeur jusqu’à 3 x d1 DIN Maschi G (BSPF), Gun, VA PM • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • PM-HSSE V3 offre una durezza tagliente maggione della serie VA • Fori passanti • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 483  Size Ref.

DIN Taps

Carbide Endmills

0973 1316 1666 2096 2291 2644 3020 3325

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

T349

T350

D0402

D0408

PM-HSSE V3

Blu

TiCN

VA PM

Special Relief

Form B / 4.5 x P

ISO 228

Item #

T349 0973 T349 1316 T349 1666 T349 2096 T349 2291 T349 2644 T349 3020 T349 3325

T350 0973 T350 1316 T350 1666 T350 2096 T350 2291 T350 2644 T350 3020 T350 3325

HSS Endmills Reamers 7

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

334

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • •

•

• • • • • •

• • • • • • • • •

• •

• • • •

T349 T350

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps G (BSPF), Spiral Flute, R15N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1

HSS Drills

Tarauds DIN G (BSPF), Hélice 15°, type N • General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 1.5 x d1 DIN Maschi G (BSPF), Tagliente a Elica, R15N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Adatto per operazioni su macchine CN • Profondità fino a circa 1,5 x d1

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

HSSE

Brt

TiN

R15

Form C / 2.5 x P

ISO 228

Item #

T278 0973 T278 1316 T278 1666 T278 2096 T278 2291 T278 2644 T278 3020 T278 3325

T279 0973 T279 1316 T279 1666 T279 2096 T279 2291 T279 2644 T279 3020 T279 3325

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • • • •

T278 T279

• •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0973 1316 1666 2096 2291 2644 3020 3325

HSSE

Size Ref.

T279 D0406

DIN Taps

Vc Page #: 482 

T278 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

Machos DIN G (BSPF), Helicoidal R15, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 1.5 x d1

• Optimal • Effective

335

Back to index Contents

DIN Taps G (BSPF), Spiral Flute, R40 N

Carbide Drills

• General purpose use, materials up to approx. 1000 N/mm² • Blind holes • Suitable for machine operations • Depths up to approx. 2.5 x d1

HSS Drills

Tarauds DIN G (BSPF), Hélice 40°, type N • Utilisations générales • Convient au matériaux jusqu’à 1000N/mm² • Trous borgnes • Profondeu jusqu’à 2.5 x d1 • Diamètre de queue et carré suivant DIN371 DIN Maschi G (BSPF),Tagliente a Elica, R40 N • Maschio universale per materiali fino a circa 1000N/mm² • Fori ciechi • Adatto per operazioni su macchine CN • Profondità fino a circa 2,5 x d1

ISO Taps

Machos DIN G (BSPF), Helicoidal R40, N • Uso general • Adecuado para materiales de hasta 1000N/mm² • Agujeros ciegos • Profundidades hasta 2.5 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

0973 1316 1666 2096 2291 2644 3020 3325 3790 4191 4432 4780

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1 G 1-1/8 G 1-1/4 G 1-3/8 G 1-1/2

28 19 19 14 14 14 14 11 11 11 11 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

170

28.0

22.0

35.5

170

32.0

24.0

39.5

180

36.0

29.0

42.0

190

36.0

29.0

45.5

T281

T282

T283

D0402

D0406

HSSE

Brt

Blu

TiN

R40

Form C / 2.5 x P

ISO 228

Item #

T281 0973 T281 1316 T281 1666 T281 2096 T281 2291 T281 2644 T281 3020 T281 3325 • • • •

T282 0973 T282 1316 T282 1666 T282 2096 T282 2291 T282 2644 T282 3020 T282 3325 • • • •

T283 0973 T283 1316 T283 1666 T283 2096 T283 2291 T283 2644 T283 3020 T283 3325 • • • •

HSS Endmills Reamers 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • •

T281 T282 T283

• • • • • • • • • • • • • • • • • • • •

Tech Info

336

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

watch the video

HSS Drills

Tarauds DIN G (BSPF), Hélice 50°, Black Magic • Pour taraudage haute performance universel • PM-HSSE V3 pour une meilleure durée de vie • Convient aux inox et aciers jusqu’à 850N/mm² • Trous borgnes jusqu’à 3 x d1 • Peut etre ulitiser comme taraud Synchro sur machines adaptées

Machos DIN G (BSPF), Helicoidal R50, Black Magic • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros pasantes hasta 3 x d1 • Adecuado para roscado sincronizado

Carbide Drills

DIN Taps G (BSPF), Spiral Flute, R50 Black Magic

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  l1

drill ø

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

R50 Form C / 2.5 x P ISO 228

Item # T699 0973 T699 1316 T699 1666 T699 2096 T699 2291 T699 2644 T699 3020 T699 3325

TPI

UNI

DIN Taps

d1 G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

HARDLUBE

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • •

• • • •

• •

• • • •

T699

•

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0973 1316 1666 2096 2291 2644 3020 3325

PM-HSSE V3

Carbide Endmills

Size Ref.

T699 D0410

Tool Holding

ISO Taps

DIN Maschi G (BSPF), Tagliente a Elica, R50 Black Magic • Maschio universale ad alte prestazioni • PM-HSSE V3 offre una vita utensile superiore • Ideale per acciai inossidabili e accia ad alta resistenza fino a 850N/mm² • Adatto per maschiatura sincronizzata su macchina CN • Fori ciechi fino 3 x d1

337

Back to index Contents

DIN Taps G (BSPF), Spiral Flute, R45 VA

Carbide Drills

• Use in stainless steels and high strength steels up to 1000N/mm² • Blind holes • Suitable for synchronous tapping in machine operations • Depths up to approx. 3 x d1 Tarauds DIN G (BSPF), Hélice 45°, type VA • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • Trous borgnes • Peut etre utilisé sur machines synchro adaptées • Profondeur jusqu’à 3 x d1

HSS Drills

DIN Maschi G (BSPF),Tagliente a Elica, R45 VA • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • Fori ciechi • Adatto per maschiatura sincronizzata su macchina CN • Profondità fino a circa 3 x d1

ISO Taps

Machos DIN G (BSPF), Helicoidal R45, VA DH • Adecuado para roscado sincronizado en agujeros profundos • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos • Profundidades hasta 3 x d1

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 482  Size Ref.

DIN Taps

Carbide Endmills

0973 1316 1666 2096 2291 2644 3020 3325

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

T284

T285

D0402

D0408

HSSE

Blu

TiCN

R45

Form C / 2.5 x P

ISO 228

Item #

T284 0973 T284 1316 T284 1666 T284 2096 T284 2291 T284 2644 T284 3020 T284 3325

T285 0973 T285 1316 T285 1666 T285 2096 T285 2291 T285 2644 T285 3020 T285 3325

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

338

S Titanium & Super Alloys H Hard Materials

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•

• • • •

• • • • • •

• •

•

• • • • •

T284 T285

• • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

DIN Taps G (BSPF), Spiral Flute, R50 VA PM Machos DIN G (BSPF), Helicoidal R50, VA PM • Roscado universal de alto rendimiento • PM-HSSE V3 para una mayor vida útil de la herramienta • Uso en aceros inoxidables y aceros de alta resistencia hasta 850N/mm² • Agujeros ciegos profundos • Profundidad hasta 3 x d1

• Use in stainless steels and high strength steels up to 1000N/mm² • PM-HSSE V3 offers higher edge hardness than standard VA series • Blind holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN G (BSPF), Hélice 50°, type VA-PM • Recommandé pour les inox et aciers alliés jusqu’à 1000N/mm² • PM-HSSE V3 pour plus de résistance que la série VA sandard • Trous borgnes • Peut etre utilisé sur les machines synchro adaptées • Profondeur jusqu’à 3 x d1

Carbide Drills

Contents

Back to index

TPI

drill ø

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

8.8

100

11.0

9.0

11.8

100

12.0

9.0

15.3

125

16.0

12.0

19.0

125

18.0

14.5

21.0

140

20.0

16.0

24.5

150

22.0

18.0

28.5

160

25.0

20.0

31.0

PM-HSSE V3

Blu

TiCN

VA PM

R50

Form C / 2.5 x P

ISO 228

Item #

T351 0973 T351 1316 T351 1666 T351 2096 T351 2291 T351 2644 T351 3020 T351 3325

T352 0973 T352 1316 T352 1666 T352 2096 T352 2291 T352 2644 T352 3020 T352 3325

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • •

• •

• • • • •

• • • • • • •

T351 T352

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

0973 1316 1666 2096 2291 2644 3020 3325

PM-HSSE V3

Size Ref.

T352 D0408

DIN Taps

Vc Page #: 482 

T351 D0402

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Tool Holding

ISO Taps

DIN Maschi G (BSPF), Tagliente a Elica, R50 VA PM • Maschio per acciai inossidabili e acciai ad alta resistenza fino a 1000N/mm² • PM-HSSE V3 offre una durezza tagliente maggione della serie VA • Fori ciechi • Adatto per operazioni su macchine CN • Profondità fino a circa 3 x d1

• Optimal • Effective

339

Back to index Contents

DIN Taps G (BSPF), Forming, Multi Coolant Groove

Carbide Drills

Machos DIN G (BSPF), Laminación, con ranuras de refrigeración • Adecuado para materiales con >10% de elongación • Agujeros pasantes o ciegos • Profundidades hasta 3 x d1

• For cold forming of threads in materials with good flow characteristics • Brt - For non-ferrous materials • TiCN - Suitable for abrasive and difficult materials • Through or blind holes • Suitable for machine operations • Depths up to approx. 3 x d1

HSS Drills

Tarauds DIN G (BSPF) par déformation, avec rainures de lubrification • Convient aux matériaux avec une élasticité de mini >10% • Trous borgnes et débouchants • Profondeur jusqu’à 3 x d1 • Brt pour les non-ferreux • TiCN pour les matériaux difficiles et abrasifs DIN Maschi G (BSPF), Rullare, Multi Scarichi refrigerazione • Maschio a rullare per materiali di buona elasticità • Brt - materiali non ferrosi • TiCN - Ideale per materiali difficili e abrasivi • Fori ciechi & passanti • Adatto per operazioni su macchine CN • Profondità fino a circa 3 x d1

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 485  Size Ref.

DIN Taps

Carbide Endmills

0973 1316 1666 2096 2291 2644 3020 3325

drill ø

TPI

G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1

28 19 19 14 14 14 14 11

7.0

5.5

9.25

100

11.0

9.0

12.5

100

12.0

9.0

16.0

125

16.0

12.0

20.0

125

18.0

14.5

22.0

140

20.0

16.0

25.5

150

22.0

18.0

29.25

160

25.0

20.0

32.0

T361

T363

D0402

D0408

HSSE

Brt

TiCN

Multi Groove

Form C / 2.5 x P

ISO 228 X

Item #

T361 0973 T361 1316 T361 1666 T361 2096 T361 2291 T361 2644 • •

T363 0973 T363 1316 T363 1666 T363 2096 T363 2291 T363 2644 • •

HSS Endmills Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

340

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • •

• •

T361 T363

• • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

DIN Taps NPT, Straight Flute, UNI

Carbide Drills

• Universal use • Suitable for materials up to 1000N/mm² • Through or blind holes Tarauds DIN NPT, Goujure Droite, type UNI • Applications universelles • Convient aux matériaux jusqu’à 1000N/mm² • Trous borgnes et débouchants

HSS Drills

DIN Maschi NPT, Elica dritta, UNI • Uso universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  l1

drill ø

90 100 100 125 140 160 170

20 22 22 25 28 30 30

7.0 11.0 12.0 16.0 20.0 25.0 32.0

5.5 9.0 9.0 12.0 16.0 20.0 24.0

8 12 12 15 19 23 27

4 4 4 4 4 5 5

8.2 10.8 14.0 17.5 23.0 28.5 37.0

TPI

Brt

UNI 1:16 Taper Form C / 2.5 x P ANSI B1.20.1

Item #

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • •

•

• • • • • •

• • • • • • • •

T308

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Carbide Endmills

T308 1029 T308 1372 T308 1716 T308 2134 T308 2667 T308 3340 •

NPT

1029 1/8 27 1372 1/4 18 1716 3/8 18 2134 1/2 14 2667 3/4 14 1 11.5 3340 4216 1-1/4 11.5

HSSE

DIN Taps

Size Ref.

T308 D0402

Tool Holding

ISO Taps

Machos DIN NPT, Ranuras rectas, UNI • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes o ciegos

341

Back to index Contents

DIN Taps RC (BSPT), Straight Flute, UNI

Carbide Drills

HSS Drills

DIN Maschi NPT, Elica dritta, UNI • Uso universale • Ideale per materiali fino a 1000N/mm² • Fori ciechi & passanti Machos DIN NPT, Ranuras rectas, UNI • Uso general • Adecuado para materiales hasta 1000N/mm² • Agujeros pasantes o ciegos

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Chamfer Limit & Nut Tolerance

Vc Page #: 484  Size Ref.

NPT

DIN Taps

0973 1316 1666 2096 2644 3325

TPI

drill ø

28 19 19 14 14 11

90 100 100 125 140 160

15 22 22 28 28 32

7.0 11.0 12.0 16.0 20.0 25.0

5.5 9.0 9.0 12.0 16.0 20.0

8 12 12 15 19 23

4 4 4 4 4 5

8.4 10.8 14.5 18.0 23.0 29.0

HSSE TiCN

UNI 1:16 Taper Form C / 2.5 x P ANSI B1.20.1

Item # T808 0973 T808 1316 T808 1666 T808 2096 T808 2644 T808 3325

Carbide Endmills

d1 1/8 1/4 3/8 1/2 3/4 1

T808 D0408

HSS Endmills Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • •

• • • • • •

•

• • • • • •

•

T808

• • • • • • • •

Tech Info

342

ISO VDI 3323

• Optimal • Effective

CARBIDE ENDMILLS

• High performance solutions for slotting, finishing, roughing and profiling • Micro and ultra fine grain type carbides • General purpose and application specific geometries

Contents

Endmills Carbide Finder Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

Page

350

351

353

354

355

356

357

E600

E603

E608

E511

E515

E610

E611

E519

TiAlN

VHM Brt N

VHM TiAlN N DIN 6527K h6

VHM TiAlN N DIN 6527L h6

• • • • • • • • • • • • • • • • • • • • • •

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

HSS Drills ISO Taps

Catalogue Code E502 Type of Cut: Slotting • Finishing Universal Roughing Profiling Material VHM Surface Finish TiAlN N Sutton Designation Standard DIN 6527K h6 Shank Tolerance

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers Tech Info

344

VDI^ 3323

Material

Condition

•

Brt

VHM N h6

•

• • •

Brt

• • •

VHM N h6

TiAlN

• • •

VHM TiAlN W DIN 6527K h6

N/mm2 440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 610 880 570 840 460 780 210

• • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • • • • •

• • • •

• •

• • • • • •

•

• • •

360 270 320 460 390 320 360

680 950 840 1180 1080

• • • • • • • • • • • •

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

• Optimal • Effective

•

• • • •

• • • • • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • •

Contents 359

360

361

362

363

364

365

366

367

368

369

E523

E527

E601

E604

E532

E635

E637

E609

E547

E450

E452

E454

E602

E605

E551

E553

• •

•

• •

•

TiAlN N DIN 6527K h6

Brt

TiAlN

Brt

N WN DIN 6527L h6

Brt

VHM

VHM N h6

VHM

TiAlN N DIN 6527L h6 VDI^

• • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

• • • • • • •

• • • • • • • • • • •

• •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • •

• • • • • • • • • • • • • •

• • • • • • • • • • •

•

• • • • • • • •

•

• • • • • • • • • • •

• • • • • •

• • • • • • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

• • • • • • •

• • • • • • • • • • •

• •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO Taps

TiAlN N h6

VHM TiAlN

ISO

Tool Holding

TiAlN N h6

VHM Brt N h6

DIN Taps

TiAlN

VHM-ULTRA VHM-ULTRA

Carbide Endmills

N h6

VHM TiAlN N h6

HSS Endmills

Brt

VHM

Slotting Finishing Universal Roughing Profiling

Reamers

VHM VHM TiAlN TiAlN W N DIN 6527L DIN 6527K h6 h6

•

Tech Info

• • •

HSS Drills

Carbide Drills

358

345

Contents

Endmills Carbide Finder 370

371

372

390

391

392

393

394

396

Catalogue Code E555 Type of Cut: Slotting Finishing Universal Roughing Profiling • Material VHM-ULTRA Surface Finish AlCrN N Sutton Designation Standard h6 Shank Tolerance

E606

E607

E557

E422

E424

E533

E535

E559

E426

• •

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

Page

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

HSS Drills ISO Taps ISO

VDI^ 3323

Material

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers Tech Info

346

Condition

~ 0.15 %C

125

• Brt

VHM N h6

•

VHM-ULTRA VHM-ULTRA

• • •

VHM-ULTRA AlCrN UNI UNI DIN 6527L DIN 6527K h5

VHM-ULTRA AlCrN UNI DIN 6527L h6

VHM-ULTRA

TiAlN

AlCrN N h6

AlCrN UNI DIN 6527K h5

AlCrN UNI DIN 6527L h5

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • •

• • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • •

• • •

• • • • • •

•

• • • • • • • • • • • • • •

• •

N/mm2

360

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

680

•

• • • • • •

•

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 610 880 570 840 460 780 210 360 270 320 460 390 320

950 840 1180

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

• Optimal • Effective

•

• • •

• •

Contents 398

399

400

401

373

377

379

381

385

387

388

389

E430

E545

E549

E440

E442

E580

E581

E582

E598

E650

E456

E457

E458

•

VHM TiAlN N h6

VDI^

• • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • •

• • • • • •

• • •

• • • • •

• • • • • •

• • • • • • • • • • • • • •

•

• •

• • • • • • • •

•

• • • • • •

• •

• • • • •

•

• •

• • • • •

• • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • •

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO Taps

•

VHM TiSiN

ISO

Tool Holding

•

VHM-ULTRA AlCrN UNI h5

DIN Taps

•

Slotting Finishing Universal Roughing Profiling

Carbide Endmills

VHM-ULTRA AlCrN UNI DIN 6527L h6

• • •

HSS Endmills

AlCrN UNI h5

• •

• • •

Reamers

VHM-ULTRA

• •

Tech Info

• • •

• •

HSS Drills

Carbide Drills

397

347

Contents

Endmills Carbide Finder Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

403

404

405

406

407

408

409

410

411

412

E444

E310

E400

E402

E408

E480

E478

E446

E410

E459

E462

• •

•

VHM Brt Al h6

VHM Brt Al

Page 402

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

HSS Drills ISO Taps

Catalogue Code Type of Cut: Slotting Finishing Universal Roughing Profiling Material Surface Finish Sutton Designation Standard Shank Tolerance

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers Tech Info

348

VDI^ 3323

Material

Condition

•

VHM-ULTRA CrN Al DIN 6527L DIN 6527L h6 h5

•

VHM-ULTRA

CrN Al h5

• • •

VHM-ULTRA Brt Al DIN 6527L h5

• • •

VHM Brt Al DIN 6527L

• • •

•

VHM-ULTRA HELICA VA DIN 6527L h5 h6 h6

N/mm2 440 640 840 910 1010 610 930 1010 1180 680 1100

• • • • •

680 810 610 840 840 610

• • • • •

• • • • • • • •

• • • • •

• • • • • • • •

• •

880 570 840 460 780 210 360 270 320 460 390 320 360

680 950 840 1180 1080

• • • • • • •

• • • • • • • •

• • • • • • • • •

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) nealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

• Optimal • Effective

Contents

•

• VHM-ULTRA AlCrN AlCrN VA-R NH DIN 6527L DIN 6527L h6 h5

VHM-ULTRA

AlCrN NH DIN 6527L h6

•

E564

•

VHM-ULTRA AlCrN NH DIN 6527L h6

E566

•

E568

E464

E466

E468

E470

E476

E477

E472

E474

E486

E487

•

• •

VHM-ULTRA Aldura VH DIN 6527L h6

VHM-ULTRA AlNova Ti DIN 6527L h6

VHM-ULTRA AlNova Ti-3XL Ti-4XL h6

VHM-ULTRA Xceed Ni DIN 6527L h6

E481

•

VHM-ULTRA VHM-ULTRA Xceed Xceed Ni-3XL Ni-4XL UNI h6 h5

Slotting Finishing Universal Roughing Profiling

VDI^

• • • • • • • • • • • • • • • •

• • • • •

• • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • •

• • • • • •

•

• •

• • • • • • •

• •

3323

• • • • • • • • • • • • • • • • •

• • • •

•

• •

•

• •

•

• •

• • • •

• •

•

• • • • • • • • •

• • •

•

• • • • • •

•

• • • • • •

• • • • • • • • • • •

• • • • •

• • • • • • • • • • •

• • • • •

• • • • • • • • • • •

• • • • •

• • • • • • • • • • •

• • • • •

• • • • • • • •

• • • • • • • • • • •

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO Taps

•

E562

ISO

Tool Holding

E543

DIN Taps

E436

Carbide Endmills

E434

HSS Endmills

E432

Reamers

•

Tech Info

E488

HSS Drills

Carbide Drills

413 414 415 416 417 418 419 421 422 423 424 425 426 427 428 429 430 431 432 433

349

Back to index Contents

Slot Drills Carbide, 2 Flute, R30 N, DIN6527K

Carbide Drills

• For precision milling of slots & cavities • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life Fraise à rainurer 2 dents carbure, R30N, DIN6527K • Pour le fraisage de rainures et de poches • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie

HSS Drills

Frese metallo duro, 2 Taglienti, R30 N, DIN6527K • Fresatura di cave ad alta precisione • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 2 ranuras, R30 N, DIN6527K • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 486  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

0200 0300 0400 0500 0600 0800 1000 1200 1600 2000

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

E502

E503

B0210

VHM

TiAlN

R30

Item #

E502 0200 E502 0300 E502 0400 E502 0500 E502 0600 E502 0800 E502 1000 E502 1200 E502 1600 E502 2000

E503 0200 E503 0300 E503 0400 E503 0500 E503 0600 E503 0800 E503 1000 E503 1200 E503 1600 E503 2000

HSS Endmills Reamers 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E502 / E503

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

Tech Info

350

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Slot Drills Carbide, 2 Flute, R30 N, Regular • For precision milling of slots & cavities • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life

HSS Drills

Fraise à rainurer 2 dents carbure, R30N • Pour le fraisage de rainures et de poches • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, 2 Taglienti, R30 N, Media • Fresatura di cave ad alta precisione • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 2 ranuras, R30 N, Regular • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

0100 0150 0200 0250 0300 0350 0400 0450 0500 0600 0700 0800 0900 1000 1100 1200 1400 1600 1800 2000 2500

VHM

Brt

TiAlN

R30

Item #

4.5

9.5

100

E600 0100 E600 0150 E600 0200 E600 0250 E600 0300 E600 0350 E600 0400 E600 0450 E600 0500 E600 0600 E600 0700 E600 0800 E600 0900 E600 1000 E600 1100 E600 1200 E600 1400 E600 1600 E600 1800 E600 2000 E600 2500

E603 0100 E603 0150 E603 0200 E603 0250 E603 0300 E603 0350 E603 0400 E603 0450 E603 0500 E603 0600 E603 0700 E603 0800 E603 0900 E603 1000 E603 1100 E603 1200 E603 1400 E603 1600 E603 1800 E603 2000 E603 2500

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • •

E600 E603

• • • •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

Tech Info

Reamers

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 25.0

VHM

DIN Taps

Size Ref.

E603 B0214

Carbide Endmills

Vc Page #: 486 

E600 B0212

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

• Optimal • Effective

351

Back to index Contents

Slot Drills Carbide, 2 Flute, R30 N, DIN6527L

Carbide Drills

• For precision milling of slots & cavities • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life Fraise à rainurer 2 dents carbure, R30N, DIN6527L • Pour le fraisage de rainures et de poches • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie

352

HSS Drills

Frese metallo duro, 2 Taglienti, R30 N, DIN6527L • Fresatura di cave ad alta precisione • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 2 ranuras, R30 N, DIN6527L • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

12º

Tool Holding Vc Page #: 486  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills HSS Endmills

0200 0300 0350 0400 0450 0500 0600 0700 0800 0900 1000 1200 1400 1600 1800 2000

E507

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

2.0 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 18.0 20.0

B0210 VHM TiAlN

N R30 HB h6

Item #

104

E507 0200 E507 0300 • E507 0400 • E507 0500 E507 0600 E507 0700 E507 0800 E507 0900 E507 1000 E507 1200 E507 1400 E507 1600 E507 1800 E507 2000

Reamers 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • • • • • • • •

• • • • • •

E507

• • • • • • • • • • • • • •

Tech Info

352

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 2 Flute, R30 N, Extra Long • For precision milling of slots & cavities • Suitable for materials up to 1600 N/mm² Fraise à rainurer 2 dents carbure, R30N, Extra Longue • Pour le fraisage de poches et finition • Convient au matériaux jusqu’à 1600 N/mm²

HSS Drills

Frese metallo duro, 2 Taglienti, R30 N, Extra Lunga • Fresatura di cave molto profonde • Ideale per materiali fino a 1600 N/mm²

ISO Taps

Fresas de MD, 2 ranuras, R30 N, Extra Larga • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm²

Size Ref.

0300 0400 0500 0600 0800 1000 1200 1600 2000

100

100 100

Brt

N R30 HA h6

Item #

100

150

E608 0300 E608 0400 E608 0500 E608 0600 E608 0800 E608 1000 E608 1200 E608 1600 E608 2000

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • •

•

• •

•

• •

• • • •

E608

•

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

VHM

DIN Taps

Vc Page #: 486 

E608 B0212

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

353

Back to index Contents

Endmills Carbide, 3 Flute, R30 N, DIN6527K

Carbide Drills

• Universal use for slotting and finishing with the one tool • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life Fraise à rainurer 3 dents carbure, R30N, DIN6527K • Pour le fraisage de rainures, de poches et finition • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie

HSS Drills

Frese metallo duro, 3 Taglienti, R30 N, DIN6527K • Fresa universale per cave e lavorazioni di finitura • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 3 ranuras, R30 N, DIN6527K • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 486 

DIN Taps

Size Ref.

d1 (h10)

Carbide Endmills

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

VHM

TiAlN

R30

HB h6

Item #

E511 0300 E511 0400 E511 0500 E511 0600 E511 0800 E511 1000 E511 1200 • E511 1600 • E511 2000

E512 0300 E512 0400 E512 0500 E512 0600 E512 0800 E512 1000 E512 1200 • E512 1600 • E512 2000

d2 6

E512 B0210

E511 B0210

HSS Endmills Reamers 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E511 / E512

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

Tech Info

354

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 3 Flute, R30 N, DIN6527L • Universal use for slotting and finishing with the one tool • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life

HSS Drills

Fraise à rainurer 3 dents carbure, R30N, DIN6527L • Pour le fraisage de rainures, de poches et finition • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, 3 Taglienti, R30 N, DIN6527L • Fresa universale per cave e lavorazioni di finitura • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

Size Ref.

d1 (h10)

0300 0350 0400 0450 0500 0600 0700 0800 0900 1000 1200 1400 1600 1800 2000

VHM

TiAlN

R30

Item #

104

E515 0300 • E515 0400 • E515 0500 E515 0600 E515 0700 E515 0800 E515 0900 E515 1000 E515 1200 E515 1400 E515 1600 E515 1800 E515 2000

E516 0300 • E516 0400 • E516 0500 E516 0600 E516 0700 E516 0800 E516 0900 E516 1000 E516 1200 E516 1400 E516 1600 E516 1800 E516 2000

P 1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • •

E515 / E516

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • • • • • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 18.0 20.0

E516 B0210

DIN Taps

Vc Page #: 486 

E515 B0210

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

HSS Endmills

ISO Taps

Fresas de MD, 3 ranuras, R30 N, DIN6527L • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

355

Back to index Contents

Endmills Carbide, 3 Flute, R30 N, Regular

Carbide Drills

• For precision milling of slots & cavities • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life Fraise à rainurer 3 dents carbure, R30N • Pour le fraisage de rainures et de poches • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie

HSS Drills

Frese metallo duro, 3 Taglienti, R30 N, Media • Fresatura di cave ad alta precisione • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 3 ranuras, R30 N, Regular • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

12º

Tool Holding

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 487  Size Ref.

DIN Taps

Carbide Endmills HSS Endmills

0100 0150 0200 0250 0300 0350 0400 0450 0500 0600 0700 0800 0900 1000 1100 1200 1400 1600 1800 2000 2500

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 25.0

E610

E611

B0212

B0214

VHM

Brt

TiAlN

R30

Item #

4.5

9.5

100

E610 0100 E610 0150 E610 0200 E610 0250 E610 0300 E610 0350 E610 0400 E610 0450 E610 0500 E610 0600 E610 0700 E610 0800 E610 0900 E610 1000 E610 1100 E610 1200 E610 1400 E610 1600 E610 1800 E610 2000 E610 2500

E611 0100 E611 0150 E611 0200 E611 0250 E611 0300 E611 0350 E611 0400 E611 0450 E611 0500 E611 0600 E611 0700 E611 0800 E611 0900 E611 1000 E611 1100 E611 1200 E611 1400 E611 1600 E611 1800 E611 2000 E611 2500

Reamers E610 E611

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

356

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 3 Flute, R45 W, DIN6527K • Universal use for slotting and finishing with the one tool • Suitable for materials up to 45 HRC, SOFT MATERIALS • TiAlN for longer tool life

HSS Drills

Fraise à rainurer 3 dents carbure, R45 W, DIN6527K • Pour le fraisage de rainures, de poches et finition • Convient au matériaux aciers doux et non-ferreux • Brt pour les non-ferreux • TiAlN pour une meilleure durée de vie Frese metallo duro, 3 Taglienti, R45 W, DIN6527K • Fresa universale per cave e lavorazioni di finitura • Ideale per materiali fino a 45 HRC • TiAlN per Ottimizzare vita utensile

Vc Page #: 487  Size Ref.

d1 (e8)

0300 0400 0500 0600 0800 1000 1200 1600 2000

E520 B0210

VHM

TiAlN

R45

Item #

E519 0300 E519 0400 E519 0500 E519 0600 E519 0800 E519 1000 E519 1200 E519 1600 E519 2000

E520 0300 E520 0400 E520 0500 E520 0600 E520 0800 E520 1000 E520 1200 E520 1600 E520 2000

P 1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • •

E519 / E520

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

E519 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

Carbide Endmills

ISO Taps

Fresas de MD, 3 ranuras, R45 W, DIN6527K • Para ranurado y acabado con una herramienta • Geometría optimizada para materiales blandos • Brt para materiales no férricos • TiAlN para una mayor vida útil de la herramienta

357

Back to index Contents

Endmills Carbide, 3 Flute, R45 W, DIN6527L

Carbide Drills

Fresas de MD, 3 ranuras, R45 W, DIN6527L • Para ranurado y acabado con una herramienta • Geometría optimizada para materiales blandos • Brt para materiales no férricos • TiAlN para una mayor vida útil de la herramienta

• Universal use for slotting and finishing with the one tool • Optimised geometry for soft materials • Brt for non-ferrous materials • TiAlN for longer tool life

HSS Drills

Fraise à rainurer 3 dents carbure, R45 W, DIN6527L • Pour le fraisage de rainures, de poches et finition • Convient au matériaux aciers doux et non-ferreux • Brt pour les non-ferreux • TiAlN pour une meilleure durée de vie Frese metallo duro, 3 Taglienti, R45 W, DIN6527L • Fresa universale per cave e lavorazioni di finitura • Geometria tagliente ottimizzate per materiali morbidi • Brt per materiali non ferrosi • TiAlN per Ottimizzare vita utensile

ISO Taps

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 487  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills

0300 0400 0500 0600 0800 1000 1200 1600 2000

3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

E523

E524

B0210

VHM

TiAlN

R45

Item #

104

E523 0300 E523 0400 E523 0500 E523 0600 E523 0800 E523 1000 E523 1200 E523 1600 E523 2000

E524 0300 E524 0400 E524 0500 E524 0600 E524 0800 E524 1000 E524 1200 E524 1600 E524 2000

HSS Endmills Reamers 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E523 / E524

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • •

Tech Info

358

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 4 Flute, R30 N, DIN6527K • For precision finish milling applications • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life

HSS Drills

Fraise 4 dents carbure, R30N, DIN6527K • Pour le fraisage de rainures, de poches et finition • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, 4 Taglienti, R30 N, DIN6527K • Fresa ideale per lavorazioni di finitura • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 4 ranuras, R30 N, DIN6527K • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

Size Ref.

d1 (h10)

0300 0400 0500 0600 0800 1000 1200 1600 2000

VHM

TiAlN

R30

Item #

E527 0300 E527 0400 E527 0500 E527 0600 E527 0800 E527 1000 E527 1200 E527 1600 E527 2000

E528 0300 E528 0400 E528 0500 E528 0600 E528 0800 E528 1000 E528 1200 E528 1600 E528 2000

P 1

M 8

• • • • • • • • • • • • • • • • • • • • • •

E527 / E528

P Steel M Stainless Steel

Cast Iron

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

E528 B0210

DIN Taps

Vc Page #: 487 

E527 B0210

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

359

Back to index Contents

Endmills Carbide, 4 Flute, R30 N, Regular

Carbide Drills

• For precision finish milling applications • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life Fraise 4 dents carbure, R30N • Pour le fraisage de rainures, de poches et finition • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie

HSS Drills

Frese metallo duro, 4 Taglienti, R30 N, Media • Fresa ideale per lavorazioni di finitura • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 4 ranuras, R30 N, Regular • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 487  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills HSS Endmills

0100 0150 0200 0250 0300 0350 0400 0450 0500 0600 0700 0800 0900 1000 1100 1200 1400 1600 1800 2000 2500

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 25.0

E601

E604

B0212

B0214

VHM

Brt

TiAlN

R30

Item #

4.5

9.5

100

E601 0100 E601 0150 E601 0200 E601 0250 E601 0300 E601 0350 E601 0400 E601 0450 E601 0500 E601 0600 E601 0700 E601 0800 E601 0900 E601 1000 E601 1100 E601 1200 E601 1400 E601 1600 E601 1800 E601 2000 E601 2500

E604 0100 E604 0150 E604 0200 E604 0250 E604 0300 E604 0350 E604 0400 E604 0450 E604 0500 E604 0600 E604 0700 E604 0800 E604 0900 E604 1000 E604 1100 E604 1200 E604 1400 E604 1600 E604 1800 E604 2000 E604 2500

Reamers 3

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

360

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • •

• • • •

E601 E604

• • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 4 Flute, R30 N, DIN6527L • For precision finish milling applications • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life

HSS Drills

Fraise 4 dents carbure, R30N, DIN6527L • Pour le fraisage de rainures, de poches et finition • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, 4 Taglienti, R30 N, DIN6527L • Fresa ideale per lavorazioni di finitura • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 4 ranuras, R30 N, DIN6527L • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

12º

Tool Holding

N R30 HB h6

Item #

104

E532 0500 E532 0600 E532 0700 E532 0800 E532 0900 E532 1000 E532 1200 E532 1400 E532 1600 E532 1800 E532 2000

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • •

• • • •

• • • • • • • • • • • • • • • • • • • • • •

E532

• • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

5.0 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 18.0 20.0

VHM TiAlN

DIN Taps

d1 (h10)

0500 0600 0700 0800 0900 1000 1200 1400 1600 1800 2000

B0210

Carbide Endmills

Vc Page #: 487  Size Ref.

E532

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

361

Back to index Contents

Endmills Carbide, 4 Flute, R35/38, Regular

Carbide Drills

• 35/38° variable flute helix for chatter free milling • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life Fraise 4 dents carbure, R35°/38°, Régulières • Hélice variable 35/38° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1600N/mm² • TiAlN pour une meilleure durée de vie

HSS Drills

Frese metallo duro, 4 Taglienti, R35°/38°, Media • Elica tagliente variabile 35/38° per lavorazioni senza vibrazioni • Adatta per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 4 ranuras, R35°/38°, Regular • Hélice de ranura variable 35/38° para fresado sin vibraciones • Adecuado para materiales hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

45º

6º

Tool Holding

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 488  Size Ref.

DIN Taps

Carbide Endmills

0300 0400 0500 0600 0800 1000 1200 1400 1600 2000

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 20.0

E635

E636

B0214

VHM-ULTRA

TiAlN

R35/38

Item #

2.8

3.7

4.6

5.5

7.5

9.5

11.2

13.0

15.0

104

19.0

E635 0300 E635 0400 E635 0500 E635 0600 E635 0800 E635 1000 E635 1200 • E635 1600 E635 2000

E636 0300 E636 0400 E636 0500 E636 0600 E636 0800 E636 1000 E636 1200 E636 1400 E636 1600 E636 2000

HSS Endmills Reamers P 7

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•• ••

••

•• •• •• •• •• ••

•• •• ••

••

•• •• •• •• •• •• •• •• •• •• ••

E635 E636

•• •• •• •• •• •• •• •• •• •• •• •• ••

Tech Info

362

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 4 Flute, R35/38, Extra Long • For precision finish milling applications • Suitable for materials up to 1300 N/mm² • TiAlN for longer tool life

HSS Drills

Fraise 4 dents carbure, R35/38, Extra Longue • Pour le fraisage de rainures, de poches et finition • Convient au matériaux jusqu’à 1300 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, 4 Taglienti, R35/38, Extra Lunga • Fresa ideale per lavorazioni di finitura • Ideale per materiali fino a 1300 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD, 4 ranuras, R35/38, Extra Larga • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1300 N/mm² • TiAlN para una mayor vida útil de la herramienta

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 487  Size Ref.

d1 (h10)

0600 0800 1000 1200 1600 2000

E638 B0214

VHM-ULTRA

TiAlN

R35/38

Item #

100

150

E637 0600 E637 0800 E637 1000 E637 1200 E637 1600 E637 2000

E638 0600 E638 0800 E638 1000 E638 1200 E638 1600 E638 2000

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E637 E638

• • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

Carbide Endmills

6.0 8.0 10.0 12.0 16.0 20.0

E637 B0214

Tool Holding

6º

DIN Taps

45º

• Optimal • Effective

363

Back to index Contents

Endmills Carbide, 4 Flute, R30 N, Extra Long

Carbide Drills

• For precision finish milling applications • Suitable for materials up to 1600 N/mm² Fraise 4 dents carbure, R30N, Extra Longue • Pour le fraisage de poches et finition • Convient au matériaux jusqu’à 1300 N/mm²

HSS Drills

Frese metallo duro, 4 Taglienti, R30 N, Extra Lunga • Fresa ideale per lavorazioni di finitura • Ideale per materiali fino a 1600 N/mm² Fresas de MD, 2 ranuras, R30 N, Extra Larga • Para fresado de precisión de ranuras • Adecuado para materiales de hasta 1600 N/mm²

ISO Taps

12º

Tool Holding Vc Page #: 488  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

0300 0400 0500 0600 0800 1000 1200 1600 2000

E609

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

B0212 VHM Brt

N R30 HA h6

Item #

100

150

E609 0300 E609 0400 E609 0500 E609 0600 E609 0800 E609 1000 E609 1200 E609 1600 E609 2000

HSS Endmills Reamers 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • • • • •

E609

• • • • • • • • • • • • •

Tech Info

364

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Roughers Carbide, NR (normal), R30 N, DIN6527L

Carbide Drills

Fresas Desbaste, NR (normal), R30 N, DIN6527L • Para aplicaciones de desbaste • La geometría NR permite grandes pasadas • Adecuado para materiales de hasta 1200 N/mm² • TiAlN para una mayor vida útil de la herramienta

• For roughing applications • NR geometry allows for heavy cuts • Suitable for materials up to 1600 N/mm² • TiAlN for longer tool life

HSS Drills

Fraise ravageuse carbure, profil NR (normal) R30°, Type N, Din 6527L • Pour les applications d’ ébauche • Convient aux matériaux jusqu’à 1600N/mm² • Revêtement TiAlN pour une meilleure durée de vie • Brise-copeaux (NR) pour les coupes difficiles

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 488  Size Ref.

d1 (js14)

0400 0500 0600 0800 1000 1200 1600 2000

E548 B0210

VHM

TiAlN

R30 NR

Item #

104

E547 0400 E547 0500 E547 0600 E547 0800 E547 1000 E547 1200 E547 1600 E547 2000

E548 0400 E548 0500 E548 0600 E548 0800 E548 1000 E548 1200 E548 1600 E548 2000

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

E547 E548

• •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

Tech Info

Reamers

HSS Endmills

4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

E547 B0210

Tool Holding

8º

DIN Taps

45º

Carbide Endmills

ISO Taps

Frese metallo duro rompi triciolo, NR (normal), R30 N, DIN6527L • Fresa ideale per lavorazioni di sgrossatura • Geometria NR permette lavorazioni gravose • Ideale per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

• Optimal • Effective

365

Back to index Contents

Roughers Carbide, HR (fine), R20 WN, DIN6527L

Carbide Drills

Fresas Desbaste, HR (fino), R20 WN, DIN6527L • Para aplicaciones de desbaste • La geometría HR permite mayores pasadas en materiales más duros • Adecuado para materiales de hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

• For roughing applications • HR geometry allows for heavier cuts in harder materials • Suitable for materials up to 1200 N/mm² • TiAlN for longer tool life

HSS Drills

Fraise carbure, Ebauche, profil HR, R20 WN, DIN 6527L • Pour les applications d’échauche • Brises copeaux HR pour les gros enlèvements dans les matériaux durs • Convient aux matériaux jusqu’à 1200 N/mm² • Revêtement TiAlN pour une meilleure durée de vie Frese metallo duro rompi triciolo, HR (fine), R20 WN, DIN6527L • Fresa ideale per lavorazioni di sgrossatura • Geometria HR permette lavorazioni gravose su materiali di difficile lavorabilità • Ideale per materiali fino a 1200 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps HR

8º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 488  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

0600 0800 1000 1200 1400 1600 1800 2000

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E450

E451

B0210

VHM

TiAlN

R20 HR

Item #

104

E450 0600 E450 0800 E450 1000 E450 1200 • E450 1600 • E450 2000

E451 0600 E451 0800 E451 1000 E451 1200 • E451 1600 • E451 2000

HSS Endmills Reamers 5

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

366

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

• •

E450 E451

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Slot Drills Carbide, Ballnose, 2 Flute, R30 N, DIN6527K • For profiling of contour milling applications • Suitable for materials up to 1600N/mm² • TiAlN for longer tool life

HSS Drills

Fraise à rainurer 2 dents carbure, Hémisphérique, R30N, DIN6527K • Pour le fraisage de formes et de poches • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, Sferiche, 2 Taglienti, R30 N, DIN6527K • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

E454

E455

B0210

VHM

Brt

TiAlN

R30

Item #

E452 0300 E452 0400 E452 0500 E452 0600 E452 0800 E452 1000 E452 1200 • E452 1600 • E452 2000

E453 0300 E453 0400 E453 0500 E453 0600 E453 0800 E453 1000 E453 1200 • E453 1600 • E453 2000

E454 0300 E454 0400 E454 0500 E454 0600 E454 0800 E454 1000 E454 1200 • E454 1600 • E454 2000

E455 0300 E455 0400 E455 0500 E455 0600 E455 0800 E455 1000 E455 1200 • E455 1600 • E455 2000

P 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E452 / E453 E454 / E455

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E453 B0208

DIN Taps

d1 (h10)

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

E452 B0208

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

Vc Page #: 488  Size Ref.

ISO Taps

Fresas de MD esféricas, 2 ranuras, R30 N, DIN6527K • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

• Optimal • Effective

367

Back to index Contents

Slot Drills Carbide, Ballnose, 2 Flute, R30 N, Regular

Carbide Drills

• For profile & contour milling applications • Suitable for materials up to 1600N/mm² • TiAlN for longer tool life Fraise à rainurer 2 dents carbure, Hémisphérique, R30N • Pour le fraisage de formes et de poches • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie

HSS Drills

Frese metallo duro, Sferiche, 2 Taglienti, R30 N, Media • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD esféricas, 2 ranuras, R30 N, Regular • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 489  Size Ref.

DIN Taps

Carbide Endmills HSS Endmills

0100 0150 0200 0250 0300 0350 0400 0500 0600 0700 0800 0900 1000 1100 1200 1400 1600 1800 2000 2500

1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 25.0

E602

E605

B0212

B0214

VHM

Brt

TiAlN

R30

Item #

4.5

9.5

E602 0100 E602 0150 E602 0200 E602 0250 E602 0300

E605 0100 E605 0150 E605 0200 E605 0250 E605 0300 E605 0350 E605 0400 E605 0500 E605 0600 E605 0700 E605 0800 E605 0900 E605 1000 E605 1100 E605 1200 E605 1400 E605 1600 E605 1800 E605 2000 E605 2500

100

E602 0400 E602 0500 E602 0600 E602 0700 E602 0800 E602 0900 E602 1000 E602 1200 E602 1600 E602 2000

Reamers 3

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

368

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • •

• • • •

E602 E605

• • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Carbide Drills

Slot Drills Carbide, Ballnose, 2 Flute, R30 N, DIN6527L • For profile & contour milling applications • Suitable for materials up to 1600N/mm² • TiAlN for longer tool life

HSS Drills

Fraise à rainurer 2 dents carbure, Hémisphérique, R30N, DIN6527L • Pour le fraisage de formes et de poches • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, Sferiche, 2 Taglienti, R30 N, DIN6527L • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

E554 B0210

VHM

Brt

TiAlN

R30

Item #

E551 0200 E551 0300 E551 0400 E551 0500 E551 0600 E551 0800 E551 1000 E551 1200

E553 0200 E553 0300 E553 0400 E553 0500 E553 0600 E553 0800 E553 1000 E553 1200

E554 0200 E554 0300 E554 0400 E554 0500 E554 0600 E554 0800 E554 1000 E554 1200

P 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E551 E553 / E554

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys

Hard Materials

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0

E553 B0210

DIN Taps

d1 (h10)

0200 0300 0400 0500 0600 0800 1000 1200

E551 B0208

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

Vc Page #: 489  Size Ref.

ISO Taps

Fresas de MD esféricas, 2 ranuras, R30 N, DIN6527L • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

• Optimal • Effective

369

Back to index Contents

Slot Drills Carbide, Ballnose, 2 Flute, R30 N, Long Reach

Carbide Drills

Fresas de MD eféricas, 2 ranuras, R30 N, Larga • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • For profile & contour milling in long reach applications • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

Fraise à rainurer 2 dents carbure, Hémisphérique, R30N, Longue • Pour le fraisage de formes et de poches profondes • Convient au matériaux jusqu’à 1600 N/mm² • AlCrN et VHM-ULTRA pour une meilleure durée de vie Frese metallo duro, Sferiche, 2 Taglienti, R30 N, Lunga Portata • VHM-ULTRA, grado di metallo duro per alte prestazione • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

ISO Taps

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 489  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

0200 0300 0400 0500 0600 0800 1000 1200

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0

E555

E556

B0210

VHM-ULTRA

AlCrN

R30

Item #

100

110

E555 0200 E555 0300 E555 0400 E555 0500 E555 0600 E555 0800 E555 1000 E555 1200

E556 0200 E556 0300 E556 0400 E556 0500 E556 0600 E556 0800 E556 1000 E556 1200

HSS Endmills Reamers 5

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

370

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• •

• • • • • • • • • • • •

• •

E555 E556

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, Ballnose, 4 Flute, R30 N, Regular • For profile & contour milling applications • Suitable for materials up to 1600N/mm² • TiAlN for longer tool life

HSS Drills

Fraise 4 dents carbure, Hémisphérique, R30N • Pour le fraisage de rainures, de poches et finition • Convient au matériaux jusqu’à 1600 N/mm² • TiAlN pour une meilleure durée de vie Frese metallo duro, Sferiche, 4 Taglienti, R30 N, Media • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps

Fresas de MD esféricas, 4 ranuras, R30 N, Regular • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

d1 (h10)

0100 0150 0200 0250 0300 0350 0400 0450 0500 0600 0700 0800 0900 1000 1100 1200 1400 1600 1800 2000 2500

VHM

Brt

TiAlN

R30

Item #

38 38 38 38 38 50 50 50 50 50 63 63 75 75 75 75 89 89 100 100 100

4 4.5 6 9.5 12 12 14 16 16 19 19 20 22 22 25 25 32 32 38 38 38

3 3 3 3 3 4 4 6 6 6 8 8 10 10 12 12 14 16 18 20 25

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

E606 0100 E606 0150 E606 0200 E606 0250 E606 0300

E607 0100 E607 0150 E607 0200 E607 0250 E607 0300 E607 0350 E607 0400 E607 0450 E607 0500 E607 0600 E607 0700 E607 0800

E606 0400 E606 0500 E606 0600 E606 0800 E606 1000 E606 1200 E606 1600 E606 2000

E607 1000 E607 1100 E607 1200 E607 1400 E607 1600 E607 1800 E607 2000 E607 2500

ISO

E606 E607

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

VDI 3323

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

Tech Info

Reamers

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 25.0

VHM

DIN Taps

Size Ref.

E607 B0214

Carbide Endmills

Vc Page #: 489 

E606 B0208

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

12º

• Optimal • Effective

371

Back to index Contents

Endmills Carbide, Ballnose, 4 Flute, R30 N, Long Reach

Carbide Drills

Fresas de MD eféricas, 4 ranuras, R30 N, Larga • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • TiAlN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • For profile & contour milling in long reach applications • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

Fraise 4 dents carbure, Hémisphérique, R30N, Long • Pour le fraisage de formes et de poches profondes • Convient au matériaux jusqu’à 1600 N/mm² • AlCrN et VHM-ULTRA pour une meilleure durée de vie Frese metallo duro, Sferiche, 4 Taglienti, R30 N, Lunga Portata • VHM-ULTRA, grado di metallo duro per alte prestazione • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

ISO Taps

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 489  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

0200 0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000 2500

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

E557

E558

B0210

VHM-ULTRA

AlCrN

R30

Item #

100

110

140

160

182

E557 0200 E557 0300 E557 0400 E557 0500 E557 0600 E557 0800 E557 1000 E557 1200 E557 1400 E557 1600 E557 1800 E557 2000 E557 2500

E558 0200 E558 0300 E558 0400 E558 0500 E558 0600 E558 0800 E558 1000 E558 1200 E558 1400 E558 1600 E558 1800 E558 2000 E558 2500

HSS Endmills Reamers 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E557 E558 Steel

M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• •

• • • • • • • • • • • •

• •

Tech Info

372

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, Micro, 2 Flute, R40 NH Long Reach • For precision milling of cavities • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining Micro-fraise 2 dents • Pour le Micro-Fraisage de poches, de rainures et gravage • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

HSS Drills

watch the video

Frese metallo duro, Micro, 2 Taglienti, Lunga Portata • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

ISO Taps

Fresas de MD micro, 2 ranuras, Larga • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

0.4

0.5

0.6

0.7

0.8

Item #

0.2

0.5

0.16

0.2

0.16

0.2

1.5

0.16

0.4

0.26

0.4

0.26

0.4

0.26

0.4

0.37

0.4

0.37

0.6

0.37

0.6

0.37

0.7

0.45

0.7

0.45

0.7

0.45

0.7

0.45

0.9

0.55

0.9

0.55

0.9

0.55

0.9

0.55

0.9

0.55

0.65

1.2

0.75

1.2

0.75

1.2

0.75

1.2

0.75

1.2

0.75

E580 0021 E580 0022 E580 0023 E580 0031 E580 0032 E580 0033 E580 0041 E580 0042 E580 0043 E580 0044 E580 0051 E580 0052 E580 0053 E580 0054 E580 0060 E580 0061 E580 0062 E580 0063 E580 0064 E580 0070 E580 0072 E580 0073 E580 0074 E580 0081 E580 0082 E580 0083 E580 0084 E580 0085

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• •

•

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• Optimal • Effective

DIN Taps

•

E580

ISO VDI 3323

Carbide Endmills

0.3

• •

0.2

•

0021 0022 0023 0031 0032 0033 0041 0042 0043 0044 0051 0052 0053 0054 0060 0061 0062 0063 0064 0070 0072 0073 0074 0081 0082 0083 0084 0085

NH R40

• •

d1 *

VHM TiSiN

HSS Endmills

Vc Page #: 498 

B0218

Reamers

Size Ref.

E580

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

10-12º

Tech Info

373

Back to index

Micro-fraise 2 dents • Pour le Micro-Fraisage de poches, de rainures et gravage • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

watch the video

ISO Taps

Fresas de MD micro, 2 ranuras, Larga • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

10-12º

Tool Holding

Vc Page #: 498  Size Ref.

0.9 1

1.2

1.5

Tech Info

Item #

1.4

0.75

1.4

0.75

1.4

0.85

1.4

0.85

1.5

0.95

1.5

0.95

1.5

0.95

1.5

0.95

1.5

0.95

1.5

0.95

1.8

1.15

1.8

1.15

1.8

1.15

1.8

1.15

2.1

1.35

2.1

1.35

2.1

1.35

2.1

1.35

2.1

1.35

2.1

1.35

2.3

1.45

2.3

1.45

2.3

1.45

2.3

1.45

2.3

1.45

2.3

1.45

2.3

1.45

2.3

1.45

E580 0092 E580 0093 E580 0094 E580 0096 E580 0101 E580 0102 E580 0103 E580 0104 E580 0105 E580 0106 E580 0121 E580 0122 E580 0123 E580 0124 E580 0141 E580 0142 E580 0143 E580 0144 E580 0145 E580 0146 E580 0151 E580 0152 E580 0153 E580 0154 E580 0155 E580 0156 E580 0157 E580 0158

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• •

Reamers

E580

ISO VDI 3323

NH R40

•

HSS Endmills

1.4

VHM TiSiN

•

Carbide Endmills

0092 0093 0094 0096 0101 0102 0103 0104 0105 0106 0121 0122 0123 0124 0141 0142 0143 0144 0145 0146 0151 0152 0153 0154 0155 0156 0157 0158

B0218

•

DIN Taps

374

d1 *

E580

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• •

HSS Drills

Frese metallo duro, Micro, 2 Taglienti, Lunga Portata • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

•

Carbide Drills

• For precision milling of cavities • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining

• •

Contents

Endmills Carbide, Micro, 2 Flute, Long Reach

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, Micro, 2 Flute, Long Reach • For precision milling of cavities • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining Micro-fraise 2 dents • Pour le Micro-Fraisage de poches, de rainures et gravage • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

HSS Drills

watch the video

Frese metallo duro, Micro, 2 Taglienti, Lunga Portata • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

ISO Taps

Fresas de MD micro, 2 ranuras, Larga • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

2.5

Item #

2.4

1.55

2.4

1.55

2.4

1.55

2.4

1.55

2.4

1.55

2.4

1.55

2.4

1.55

2.4

1.55

2.7

1.75

2.7

1.75

2.7

1.75

2.7

1.75

2.7

1.75

2.7

1.75

2.7

1.75

2.7

1.75

3.0

1.95

3.0

1.95

3.0

1.95

3.0

1.95

3.0

1.95

3.0

1.95

3.0

1.95

3.7

2.40

3.7

2.40

E580 0161 E580 0162 E580 0163 E580 0164 E580 0165 E580 0166 E580 0167 E580 0168 E580 0181 E580 0182 E580 0183 E580 0184 E580 0185 E580 0186 E580 0187 E580 0188 E580 0201 E580 0202 E580 0203 E580 0204 E580 0205 E580 0206 E580 0207 E580 0208 E580 0209 E580 0210 E580 0251 E580 0252

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• •

•

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• Optimal • Effective

DIN Taps

•

E580

ISO VDI 3323

Carbide Endmills

1.8

• •

1.6

•

0161 0162 0163 0164 0165 0166 0167 0168 0181 0182 0183 0184 0185 0186 0187 0188 0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 0251 0252

NH R40

• •

d1 *

VHM TiSiN

HSS Endmills

Vc Page #: 498 

B0218

Reamers

Size Ref.

E580

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

10-12º

Tech Info

375

Back to index Contents

Endmills Carbide, Micro, 2 Flute, Long Reach

Carbide Drills

• For precision milling of cavities • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining Micro-fraise 2 dents • Pour le Micro-Fraisage de poches, de rainures et gravage • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

watch the video

HSS Drills

Frese metallo duro, Micro, 2 Taglienti, Lunga Portata • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

ISO Taps

Fresas de MD micro, 2 ranuras, Larga • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

10-12º

Tool Holding

Vc Page #: 498  Size Ref.

DIN Taps

d1 *

Carbide Endmills HSS Endmills

0253 0254 0255 0256 0257 0258 0259 0301 0302 0303 0304 0305 0306 0307 0308 0401 0402 0403 0404 0405 0406

E580

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

B0218 VHM TiSiN

NH R40 HA h6

Item #

3.7

2.40

3.7

2.40

3.7

2.40

3.7

2.40

3.7

2.40

3.7

2.40

3.7

2.40

4.5

2.85

4.5

2.85

4.5

2.85

4.5

2.85

4.5

2.85

4.5

2.85

4.5

2.85

4.5

2.85

4.5

3.85

4.5

3.85

4.5

3.85

4.5

3.85

4.5

3.85

4.5

3.85

E580 0253 E580 0254 E580 0255 E580 0256 E580 0257 E580 0258 E580 0259 E580 0301 E580 0302 E580 0303 E580 0304 E580 0305 E580 0306 E580 0307 E580 0308 E580 0401 E580 0402 E580 0403 E580 0404 E580 0405 E580 0406

Reamers 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• •

•

• •

•

E580

•

Tech Info

376

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, Micro, 2 Flute, Corner Rad • For precision milling of cavities • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining Micro-fraise 2 dents, Torique • Pour le Micro-Fraisage de poches • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

HSS Drills

watch the video

Frese metallo duro, Micro, 2 Taglienti, Toriche • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

ISO Taps

Fresas de MD micro, 2 ranuras, Tórica • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

0.4 0.5

0.6 0.8

1.2

1.5

rad†

Item #

0.3

0.5

0.16

0.02

0.3

0.16

0.02

0.3

1.5

0.16

0.02

0.6

0.37

0.03

0.6

0.37

0.03

0.7

0.45

0.05

0.7

0.45

0.05

0.7

0.45

0.05

0.9

0.55

0.05

0.9

0.55

0.05

1.2

0.75

0.08

1.2

0.75

0.08

1.2

0.75

0.08

1.5

0.95

0.1

1.5

0.95

0.1

1.5

0.95

0.1

1.5

0.95

0.1

1.5

0.95

0.1

1.8

1.15

0.1

1.8

1.15

0.1

1.8

1.15

0.1

2.3

1.45

0.15

2.3

1.45

0.15

2.3

1.45

0.15

2.3

1.45

0.15

2.3

1.45

0.15

3.0

1.95

0.2

3.0

1.95

0.2

E581 0021 E581 0022 E581 0023 E581 0041 E581 0042 E581 0051 E581 0052 E581 0053 E581 0061 E581 0062 E581 0081 E581 0082 E581 0083 E581 0101 E581 0102 E581 0103 E581 0104 E581 0105 E581 0121 E581 0122 E581 0123 E581 0151 E581 0152 E581 0153 E581 0154 E581 0155 E581 0201 E581 0202

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• •

•

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

†

Radius tolerance: Rad = +-0.01

• Optimal • Effective

DIN Taps

•

E581

ISO VDI 3323

• •

0.2

•

0021 0022 0023 0041 0042 0051 0052 0053 0061 0062 0081 0082 0083 0101 0102 0103 0104 0105 0121 0122 0123 0151 0152 0153 0154 0155 0201 0202

NH R40

• •

d1 *

VHM TiSiN

Carbide Endmills

Vc Page #: 498 

B0218

HSS Endmills

Size Ref.

E581

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

Reamers

10-12º

Tech Info

377

Back to index Contents

Endmills Carbide, Micro, 2 Flute, Corner Rad

Carbide Drills

• For precision milling of cavities • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining Micro-fraise 2 dents, Torique • Pour le Micro-Fraisage de poches • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

watch the video

HSS Drills

Frese metallo duro, Micro, 2 Taglienti, Toriche • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

ISO Taps

Fresas de MD micro, 2 ranuras, Tórica • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

10-12º

Tool Holding

Vc Page #: 498  Size Ref.

DIN Taps

d1 *

Carbide Endmills

0203 0204 0205 0206 0207 0251 0252 0301 0302 0303

2.5 3

E581

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

B0218 VHM TiSiN

NH R40 HA h6

rad†

Item #

3.0

1.95

0.2

3.0

1.95

0.2

3.0

1.95

0.2

3.0

1.95

0.2

3.0

1.95

0.2

3.7

2.40

0.3

3.7

2.40

0.3

4.5

2.95

0.3

4.5

2.95

0.3

4.5

2.95

0.3

E581 0203 E581 0204 E581 0205 E581 0206 E581 0207 E581 0251 E581 0252 E581 0301 E581 0302 E581 0303

HSS Endmills Reamers 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

†

Radius tolerance: Rad = +-0.01

• •

•

• •

•

E581

•

Tech Info

378

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, Micro, Ballnose, 2 Flute, Long Reach • For profile & contour milling applications • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining Fraise à rainurer 2 dents carbure, Hémisphérique, R30N, Longue • Pour le Micro-Fraisage de poches et super finition • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

HSS Drills

watch the video

Frese metallo duro, Micro, Sferiche, 2 Taglienti, Lunga Portata • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

ISO Taps

Fresas de MD micro, eféricas, 2 ranuras, Larga • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

0.5

0.6

0.8

rad†

Item #

0.2

0.5

0.15

0.1

0.2

0.15

0.1

0.2

1.5

0.15

0.1

0.3

0.25

0.15

0.3

0.25

0.15

0.3

0.25

0.15

0.4

0.35

0.2

0.4

0.35

0.2

0.4

0.35

0.2

0.4

0.35

0.2

0.4

0.35

0.2

0.4

0.45

0.25

0.4

0.45

0.25

0.4

0.45

0.25

0.4

0.45

0.25

0.4

0.45

0.25

0.4

0.45

0.25

0.5

0.55

0.3

0.5

0.55

0.3

0.5

0.55

0.3

0.5

0.55

0.3

0.5

0.55

0.3

0.5

0.55

0.3

0.6

0.75

0.4

0.6

0.75

0.4

0.6

0.75

0.4

0.8

0.95

0.5

0.8

0.95

0.5

E582 0021 E582 0022 E582 0023 E582 0031 E582 0032 E582 0033 E582 0040 E582 0041 E582 0042 E582 0043 E582 0044 E582 0051 E582 0052 E582 0053 E582 0054 E582 0055 E582 0056 E582 0061 E582 0062 E582 0063 E582 0064 E582 0065 E582 0066 E582 0081 E582 0082 E582 0083 E582 0101 E582 0102

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• •

•

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

†

Radius tolerance: Rad = +-0.01

• Optimal • Effective

DIN Taps

•

E582

ISO VDI 3323

Carbide Endmills

0.4

HSS Endmills

0.3

• •

0.2

NH R30

•

0021 0022 0023 0031 0032 0033 0040 0041 0042 0043 0044 0051 0052 0053 0054 0055 0056 0061 0062 0063 0064 0065 0066 0081 0082 0083 0101 0102

VHM TiSiN

• •

d1 *

B0218

Reamers

Vc Page #: 499  Size Ref.

E582

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

10-12º

Tech Info

379

Back to index Contents

Endmills Carbide, Micro, Ballnose, 2 Flute, Long Reach

Carbide Drills

• For profile & contour milling applications • Suitable for materials up to 35-52 HRC • TiSiN for high speed machining

HSS Drills

Fraise à rainurer 2 dents carbure, Hémisphérique, R30N, Longue • Pour le Micro-Fraisage de poches et super finition • Convient aux matériaux de 35-52 HRC • Revëtement TiSiN, résistant à la haute vitesse

watch the video

Frese metallo duro, Micro, Sferiche, 2 Taglienti, Lunga Portata • Fresatura cave di precisione • Ideale per materiali fino a 32-45 HRC • TiSiN per Lavorazioni ad alto avanzamento

ISO Taps

Fresas de MD micro, eféricas, 2 ranuras, Larga • Para ranurado de precisión • Adecuado para materiales entre 35-52 HRC • TiSiN para mecanizado de alta velocidad

10-12º

Tool Holding Vc Page #: 499  Size Ref.

DIN Taps

d1 *

Carbide Endmills HSS Endmills

0103 0104 0105 0106 0107 0121 0123 0122 0151 0152 0153 0154 0201 0202 0203 0204 0205 0206 0301 0302 0303 0304

E582

Catalogue Code Discount Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

1.2

1.5

50 50

B0218 VHM TiSiN

NH R30 HA h6

rad†

Item #

0.8

0.95

0.5

0.8

0.95

0.5

0.8

0.95

0.5

0.8

0.95

0.5

0.8

0.95

0.5

1.0

1.15

0.6

1.0

1.15

0.6

1.0

1.15

0.6

1.2

1.45

0.75

1.2

1.45

0.75

1.2

1.45

0.75

1.2

1.45

0.75

1.6

1.95

1.0

1.6

1.95

1.0

1.6

1.95

1.0

1.6

1.95

1.0

1.6

1.95

1.0

1.6

1.95

1.0

2.4

2.85

1.5

2.4

2.85

1.5

2.4

2.85

1.5

2.4

2.85

1.5

E582 0103 E582 0104 E582 0105 E582 0106 E582 0107 E582 0121 E582 0123 E582 0122 E582 0151 E582 0152 E582 0153 E582 0154 E582 0201 E582 0202 E582 0203 E582 0204 E582 0205 E582 0206 E582 0301 E582 0302 E582 0303 E582 0304

Reamers 7

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

†

Radius tolerance: Rad = +-0.01

• •

•

• •

•

E582

•

Tech Info

380

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, Hi-Feed Micro, 4 Flute, Corner Rad

watch the video

HSS Drills

Fraise 4 dents carbure, Hi-Feed, Torique • Fraise grande avance • Revêtement TiSiN pour une meilleure durée de vie • Convient aux matériaux de 35 to 68HRC

Carbide Drills

Fresas de MD alto avance, micro, 4 ranuras, Tórica • Aumento de avance • Recubrimiento resistente para una larga vida útil de la herramienta • Diseño de hélice variable para mecanizado sin vibraciones • Material de la máquina entre 35 - 68HRC

• Increased feedrates • Tough coating for long tool life • Variable helix design for chatter-free machining • Machine Material 35 to 68HRC

ISO Taps

Frese metallo duro, Hi-Feed Micro, 4 Taglienti, Toriche • Lavorazione ad alti avanzamenti • Rivestimento resistente per una lunga vita utensile • Tagliente a elica variabile per lavorazioni prive di vibrazioni • Adatta per materiali da 35 a 68HRC

rad†

Item #

0.1

0.2

0.3

1.5

0.1

1.5

0.1

1.5

0.1

1.5

0.1

1.5

0.1

1.5

0.2

1.5

0.2

1.5

0.2

E598 0102 E598 0103 E598 0104 E598 0105 E598 0106 E598 0107 E598 0108 E598 0110 E598 0112 E598 0113 E598 0114 E598 0115 E598 0116 E598 0117 E598 0118 E598 0120 E598 0122 E598 0123 E598 0124 E598 0126 E598 0152 E598 0153 E598 0154 E598 0155 E598 0157 E598 0159 E598 0160 E598 0161

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• Optimal • Effective

DIN Taps

• • • • • •

• •

E598

ISO VDI 3323

• • • • •

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

•

0102 0103 0104 0105 0106 0107 0108 0110 0112 0113 0114 0115 0116 0117 0118 0120 0122 0123 0124 0126 0152 0153 0154 0155 0157 0159 0160 0161

• • • • •

d1 *

• •

Size Ref.

N R40

Carbide Endmills

Vc Page #: 497 

VHM TiSiN

HSS Endmills

E598 B0218

Reamers

Catalogue Code Product Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

0º

Tech Info

381

Back to index Contents

Endmills Carbide, Hi-Feed Micro, 4 Flute, Corner Rad

Carbide Drills

• Increased feedrates • Tough coating for long tool life • Variable helix design for chatter-free machining • Machine Material 35 to 68HRC

HSS Drills

Fraise 4 dents carbure, Hi-Feed, Torique • Fraise grande avance • Revêtement TiSiN pour une meilleure durée de vie • Convient aux matériaux de 35 to 68HRC

watch the video

ISO Taps

0º

Tool Holding

Catalogue Code Product Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 497  d3

rad†

Item #

1.5

0.2

1.5

0.2

1.5

0.2

1.5

0.2

1.5

0.2

1.5

0.3

1.5

0.3

1.5

0.3

0.2

0.3

0.5

E598 0162 E598 0163 E598 0164 E598 0166 E598 0167 E598 0169 E598 0170 E598 0172 E598 0202 E598 0203 E598 0204 E598 0205 E598 0206 E598 0207 E598 0209 E598 0210 E598 0212 E598 0213 E598 0215 E598 0216 E598 0218 E598 0220 E598 0221 E598 0222 E598 0223 E598 0225 E598 0227 E598 0228

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• • • • •

Tech Info

•

Reamers

E598

ISO VDI 3323

N R40

• •

HSS Endmills

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

VHM TiSiN

• • • • • •

Carbide Endmills

0162 0163 0164 0166 0167 0169 0170 0172 0202 0203 0204 0205 0206 0207 0209 0210 0212 0213 0215 0216 0218 0220 0221 0222 0223 0225 0227 0228

• •

DIN Taps

382

d1 *

• • • • •

Size Ref.

E598 B0218

• Optimal • Effective

Contents

Back to index

Endmills Carbide, Hi-Feed Micro, 4 Flute, Corner Rad

watch the video

HSS Drills

Fraise 4 dents carbure, Hi-Feed, Torique • Fraise grande avance • Revêtement TiSiN pour une meilleure durée de vie • Convient aux matériaux de 35 to 68HRC

Carbide Drills

• Increased feedrates • Tough coating for long tool life • Variable helix design for chatter-free machining • Machine Material 35 to 68HRC

ISO Taps

rad†

Item #

2.5

0.3

2.5

0.3

2.5

0.3

2.5

0.3

2.5

0.3

2.5

0.3

2.5

0.3

2.5

0.3

2.5

0.3

2.5

0.5

2.5

0.5

2.5

0.5

2.5

0.5

2.5

0.5

2.5

0.5

0.2

0.3

E598 0252 E598 0253 E598 0254 E598 0255 E598 0256 E598 0258 E598 0259 E598 0260 E598 0262 E598 0264 E598 0265 E598 0266 E598 0268 E598 0269 E598 0271 E598 0303 E598 0304 E598 0305 E598 0306 E598 0308 E598 0309 E598 0310 E598 0312 E598 0314 E598 0315 E598 0316 E598 0317 E598 0319

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• •

• • • • • •

• •

E598

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• Optimal • Effective

DIN Taps

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 3 3 3 3

• • • • •

0252 0253 0254 0255 0256 0258 0259 0260 0262 0264 0265 0266 0268 0269 0271 0303 0304 0305 0306 0308 0309 0310 0312 0314 0315 0316 0317 0319

•

d1 *

• • • • •

Size Ref.

N R40

Carbide Endmills

Vc Page #: 497 

VHM TiSiN

HSS Endmills

E598 B0218

Reamers

Catalogue Code Product Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

0º

Tech Info

383

Back to index Contents

Endmills Carbide, Hi-Feed Micro, 4 Flute, Corner Rad

Carbide Drills

• Increased feedrates • Tough coating for long tool life • Variable helix design for chatter-free machining • Machine Material 35 to 68HRC

HSS Drills

Fraise 4 dents carbure, Hi-Feed, Torique • Fraise grande avance • Revêtement TiSiN pour une meilleure durée de vie • Convient aux matériaux de 35 to 68HRC

watch the video

ISO Taps

0º

Tool Holding

Catalogue Code Product Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 497  d3

rad†

Item #

0.3

0.5

0.3

0.5

E598 0320 E598 0321 E598 0323 E598 0325 E598 0326 E598 0327 E598 0328 E598 0330 E598 0331 E598 0332 E598 0334 E598 0402 E598 0403 E598 0404 E598 0406 E598 0407 E598 0408 E598 0410 E598 0411 E598 0412 E598 0414 E598 0415 E598 0416

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• • • • •

Tech Info

•

Reamers

E598

ISO VDI 3323

N R40

• •

HSS Endmills

3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4

VHM TiSiN

• • • • • •

Carbide Endmills

0320 0321 0323 0325 0326 0327 0328 0330 0331 0332 0334 0402 0403 0404 0406 0407 0408 0410 0411 0412 0414 0415 0416

• •

DIN Taps

384

d1 *

• • • • •

Size Ref.

E598 B0218

• Optimal • Effective

Contents

Back to index

Endmills Carbide, Hi-Feed, 4 Flute, Corner Rad

Carbide Drills

Fresas de MD alto avance, 4 ranuras, Tórica • Aumento de avance • Recubrimiento resistente para una larga vida útil de la herramienta • Diseño de hélice variable para mecanizado sin vibraciones • Material de la máquina entre 35 - 68HRC

• Increased feedrates • Tough coating for long tool life • Variable helix design for chatter-free machining • Machine Material 35 to 68HRC

HSS Drills

Fraise 4 dents carbure, Hi-Feed, Torique • Fraise grande avance • Revêtement TiSiN pour une meilleure durée de vie • Convient aux matériaux de 35 to 68HRC

ISO Taps

Frese metallo duro, Hi-Feed, 4 Taglienti, Toriche • Lavorazione ad alti avanzamenti • Rivestimento resistente per una lunga vita utensile • Tagliente a elica variabile per lavorazioni prive di vibrazioni • Adatta per materiali da 35 a 68HRC

Vc Page #: 496  Size Ref.

d1 *

0201 0202 0301 0302 0401 0402 0601 0602 0603

VHM TiSiN N R40 HA h6

rad†

Item #

0.3

0.5

0.3

0.5

0.3

0.5

0.3

0.5

1.0

E650 0201 E650 0202 E650 0301 E650 0302 E650 0401 E650 0402 E650 0601 E650 0602 E650 0603

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.237.337.437.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • •

• •

E650

• • • • • •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

2 2 3 3 4 4 6 6 6

E650 B0218

DIN Taps

Catalogue Code Product Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

0º

Carbide Endmills

385

Back to index Contents

Endmills Carbide, 6 Flute, Corner Rad

Carbide Drills

• Increased feedrates • Tough coating for long tool life • Variable helix design for chatter-free machining • Machine Material 35 to 68HRC

HSS Drills

Fraise 4 dents carbure, Hi-Feed, Torique • Fraise grande avance • Revêtement TiSiN pour une meilleure durée de vie • Convient aux matériaux de 35 to 68HRC Frese metallo duro, Hi-Feed, 4 Taglienti, Toriche • Lavorazione ad alti avanzamenti • Rivestimento resistente per una lunga vita utensile • Tagliente a elica variabile per lavorazioni prive di vibrazioni • Adatta per materiali da 35 a 68HRC

ISO Taps

0º

Tool Holding

Catalogue Code Product Group Material Surface Finish Application Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 496  Size Ref.

DIN Taps

d1 *

Carbide Endmills

0801 0802 0803 0804 1001 1002 1003 1004 1201 1202 1203 1204

8 8 8 8 10 10 10 10 12 12 12 12

E650 B0218 VHM TiSiN N R40 HA h6

rad†

Item #

0.3

0.5

1.0

2.0

0.3

0.5

1.0

2.0

0.3

0.5

1.0

2.0

E650 0801 E650 0802 E650 0803 E650 0804 E650 1001 E650 1002 E650 1003 E650 1004 E650 1201 E650 1202 E650 1203 E650 1204

HSS Endmills Reamers 3

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

*Cutting Ø tolerance: d 1 < 0.7 = 0 / -0.012 d1 > 0.7 = 0 / -0.020

386

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.237.337.437.5 38.1 38.2 39.1 39.2 40 41

• • • •

• • • • • •

E650

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, Chamfer, 4 Flute 90°

Carbide Drills

Fresas de MD, Avellanado, 4 ranuras 90° • Para biselar y desbarbar bordes de componentes • Ranuras rectas para un corte suave • Forma 90° • TiAiN para una mayor vida útil de la herramienta

• For chamfering & deburring component edges • Straight flute for smooth cutting • 90° form • TiAiN for longer tool life

HSS Drills

Fraise 4 dents carbure, à chanfreiner 90° • Pour le chrafreinage et cassage d’angles • Goujures droites, coupe douce • Angle 90° • Revêtement TiAiN pour une meilleure durée de vie

ISO Taps

Frese metallo duro, Svasatori, 4 Taglienti 90° • Fresatura di smussi e sbavature • Tagliente dritto e liscio • Inclinazione tagliente 90° • TiAlN per Ottimizzare vita utensile

0º

Vc Page #: 491  Size Ref.

0600 0800 1000 1200

Tool Holding

VHM TiAlN

N 90° HA h6

Item #

1.2

1.6

2.0

2.4

E456 0600 E456 0800 E456 1000 E456 1200

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • • • • • • • • • • • • •

E456

• • • • • • • • • • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Carbide Endmills

2.4 3.2 4.0 4.8

E456 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

387

Back to index Contents

Endmills Carbide, Chamfer, 4 Flute 60°

Carbide Drills

Fresas de MD, Avellanado, 4 ranuras 60° • Para biselar y desbarbar bordes de componentes • Ranuras rectas para un corte suave • Forma 60° • TiAiN para una mayor vida útil de la herramienta

• For chamfering & deburring component edges • Straight flute for smooth cutting • 60° form • TiAiN for longer tool life

HSS Drills

Fraise 4 dents carbure, à chanfreiner 60° • Pour le chrafreinage et cassage d’angles • Goujures droites, coupe douce • Angle 60° • Revêtement TiAiN pour une meilleure durée de vie Frese metallo duro, Svasatori, 4 Taglienti 60° • Fresatura di smussi e sbavature • Tagliente dritto e liscio • Inclinazione tagliente 60° • TiAlN per Ottimizzare vita utensile

ISO Taps

0º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

60º

Vc Page #: 491  Size Ref.

DIN Taps

0600 0800 1000 1200

3.8 5.5 6.9 8.3

E457 B0210 VHM TiAlN

N 60° HA h6

Item #

1.2

1.6

2.0

2.4

E457 0600 E457 0800 E457 1000 E457 1200

Carbide Endmills HSS Endmills Reamers 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • • • •

E457

• • • • • • • • • • • • • • • • • • • • • •

Tech Info

388

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, Chamfer, 4 Flute, Corner Rad

Carbide Drills

Fresas de MD, Avellanado, 4 ranuras, Tórica • Para biselar y desbarbar bordes de componentes • Ranuras rectas para un corte suave • Radio para redondear esquinas • TiAiN para una mayor vida útil de la herramienta

• For chamfering & deburring component edges • Straight flute for smooth cutting • Radius for corner rounding • TiAiN for longer tool life

HSS Drills

Fraise 4 dents carbure, à rayons • Pour le chrafreinage et cassage d’angles • Goujures droites, coupe douce • Rayons suivant diamètres • Revêtement TiAiN pour une meilleure durée de vie

ISO Taps

Frese metallo duro, Svasatori, 4 Taglienti, Toriche • Fresatura di smussi e sbavature • Tagliente dritto e liscio • Affilatura concava del tagliente per angoli raggiati • TiAlN per Ottimizzare vita utensile

0º

rad

0605 0610 0815 0820 1025 1030 1235 1240

0.5 1 1.5 2 2.5 3 3.5 4

Tool Holding

N Rad HA h6

Item #

5.0

4.0

5.0

4.0

5.0

4.0

5.0

4.0

E458 0605 E458 0610 E458 0815 E458 0820 E458 1025 E458 1030 E458 1235 E458 1240

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • • • • • • • • • • • • •

E458

• • • • • • • • • • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Size Ref.

VHM TiAlN

DIN Taps

Vc Page #: 491 

E458 B0210

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

RAD

389

Back to index Contents

Endmills Carbide, 3 Flute, R38/37/39 UNI, DIN 6527K, Harmony

Carbide Drills

Fresas de MD, 3 ranuras, R38/37/39 UNI, DIN6527K, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Uso universal para ranurado y acabado con una herramienta • Hélice de ranura variable 38/37/39° para fresado sin vibraciones • Adecuado para materiales hasta 1600 N/mm²

• VHM-ULTRA grade of carbide for high performance • Universal use for slotting & finishing with the one tool • 38/37/39° variable flute helix for chatter free milling • Suitable for materials up to 1600 N/mm²

HSS Drills

Fraise 3 dents carbure, R35°/38° UNI, DIN6527l, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Pour le rainurage et la finition • Hélice variable 38°/37°/39° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1600N/mm² Frese metallo duro, 3 Taglienti, R38/37/39 UNI, DIN 6527K, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Fresa universale per cave e lavorazioni di finitura • Elica tagliente variabile 38/37/39° per lavorazioni senza vibrazioni • Adatta per materiali fino a 1600 N/mm²

ISO Taps

6º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 489  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills

0300 0350 0400 0450 0500 0550 0600 0800 1000 1200 1400 1600 1800 2000

3.0 3.5 4.0 4.5 5.0 5.5 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E422

E423

B0210

VHM-ULTRA

AlCrN

UNI

R38/37/39

Item #

3.8

4.3

4.8

5.3

5.7

7.6

9.5

11.5

13.5

15.5

17.5

19.5

E422 0300 E422 0350 E422 0400 E422 0450 E422 0500 E422 0550 E422 0600 E422 0800 E422 1000 E422 1200 E422 1400 E422 1600 E422 1800 E422 2000

E423 0300 E423 0350 E423 0400 E423 0450 E423 0500 E423 0550 E423 0600 E423 0800 E423 1000 E423 1200 E423 1400 E423 1600 E423 1800 E423 2000

HSS Endmills Reamers 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

E422 E423

• • • • • • • • • • • • • • • • • • • • • •

Tech Info

390

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 3 Flute, R38/37/39 UNI, DIN6527L, Harmony

HSS Drills

Carbide Drills

Fresas de MD, 3 ranuras, R38/37/39 UNI, DIN6527L, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Uso universal para ranurado y acabado con una herramienta • Hélice de ranura variable 38/37/39° para fresado sin vibraciones • Adecuado para materiales hasta 1600 N/mm² • AlCrN para una mayor vida útil de la herramienta

ISO Taps

Frese metallo duro, 3 Taglienti, R38/37/39 UNI, DIN6527L, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Fresa universale per cave e lavorazioni di finitura • Elica tagliente variabile 38/37/39° per lavorazioni senza vibrazioni • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

Vc Page #: 489  Size Ref.

d1 (e8)

0300 0350 0400 0450 0500 0550 0600 0800 1000 1200 1400 1600 1800 2000

E425 B0210

VHM-ULTRA

AlCrN

UNI

R38/37/39

Item #

2.8

3.3

3.8

4.3

4.8

5.3

5.7

7.6

9.5

11.5

13.5

15.5

17.5

104

19.5

E424 0300 E424 0350 E424 0400 E424 0450 E424 0500 E424 0550 E424 0600 E424 0800 E424 1000 E424 1200 E424 1400 E424 1600 E424 1800 E424 2000

E425 0300 E425 0350 E425 0400 E425 0450 E425 0500 E425 0550 E425 0600 E425 0800 E425 1000 E425 1200 E425 1400 E425 1600 E425 1800 E425 2000

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

E424 E425

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

3.0 3.5 4.0 4.5 5.0 5.5 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E424 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

6º

Carbide Endmills

• Optimal • Effective

391

Back to index Contents

Endmills Carbide, 4 Flute, R35/38 UNI, DIN6527K, Harmony

Carbide Drills

Fresas de MD, 4 ranuras, R35/38 UNI, DIN6527K, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Hélice de ranura variable 35/38° para fresado sin vibraciones • Adecuado para materiales hasta 1600 N/mm² • AlCrN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • 35/38° variable flute helix for chatter free milling • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

Fraise 4 dents carbure, R35°/38° UNI, DIN6527K, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 35/38° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1600N/mm² • Revêtement AlCrN pour une meilleure durée de vie Frese metallo duro, 4 Taglienti, R35/38 UNI, DIN6527K, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 35/38° per lavorazioni senza vibrazioni • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

ISO Taps

45º

6º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 490  Size Ref.

DIN Taps

d1 (h9)

0600 0800 1000 1200 1600 2000

6.0 8.0 10.0 12.0 16.0 20.0

E533

E534

B0210

VHM-ULTRA

AlCrN

UNI

R35/38

Item #

5.5

7.5

9.5

11.2

15.0

19.0

E533 0600 E533 0800 E533 1000 E533 1200 E533 1600 E533 2000

E534 0600 E534 0800 E534 1000 E534 1200 E534 1600 E534 2000

Carbide Endmills HSS Endmills Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

392

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • • •

• •

• • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • • • • •

E533 E534

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 4 Flute, R35/38 UNI, DIN6527L, Harmony

Fraise 4 dents carbure, R35°/38° UNI, DIN6527l, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 35/38° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1600N/mm² • Revêtement AlCrN pour une meilleure durée de vie

Carbide Drills

Fresas de MD, 4 ranuras, R35/38 UNI, DIN6527L, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Hélice de ranura variable 35/38° para fresado sin vibraciones • Adecuado para materiales hasta 1600 N/mm² • AlCrN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • 35/38° variable flute helix for chatter free milling • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

watch the video

ISO Taps

Frese metallo duro, 4 Taglienti, R35/38 UNI, DIN6527L, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 35/38° per lavorazioni senza vibrazioni • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

Vc Page #: 490  Size Ref.

2.8

Cnr Chamf 0.04/0.08

3.7

0.04/0.08

4.6

0.08/0.12

5.5

0.08/0.12

7.5

0.08/0.12

9.5

0.15/0.25

11.2

0.15/0.25

13.0

0.25/0.35

15.0

0.25/0.35

17.0

0.25/0.35

104

19.0

0.25/0.35

120

24.0

0.40/0.50

d1 (e8)

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000 2500

E536 B0210

VHM-ULTRA

AlCrN

UNI

R35/38

Item #

E535 0300 E535 0400 E535 0500 E535 0600 E535 0800 E535 1000 E535 1200 E535 1400 E535 1600 E535 1800 E535 2000 E535 2500

E536 0300 E536 0400 E536 0500 E536 0600 E536 0800 E536 1000 E536 1200 E536 1400 E536 1600 E536 1800 E536 2000 E536 2500

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• •

• • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E535 E536

• • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

E535 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

6º

Carbide Endmills

45º

• Optimal • Effective

393

Back to index

watch the video

6º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 490  3.0 4.0

5.0

Carbide Endmills

6.0

8.0

HSS Endmills

10.0

12.0

Reamers

16.0

Tech Info

E559 E560

VHM-ULTRA

AlCrN

UNI

R35/38

rad

Item #

3.7

0.3

3.7

0.5

3.7

0.3

3.7

0.5

3.7

1.0

4.6

0.3

4.6

0.5

4.6

1.0

5.5

0.3

5.5

0.5

5.5

1.0

7.5

0.3

7.5

0.5

7.5

1.0

7.5

1.5

7.5

2.0

9.5

0.3

9.5

0.5

9.5

1.0

9.5

1.5

9.5

2.0

11.2

0.3

11.2

0.5

11.2

1.0

11.2

1.5

11.2

2.0

11.2

3.0

15.0

0.5

E559 0303 E559 0305 E559 0403 E559 0405 E559 0410 E559 0503 E559 0505 E559 0510 E559 0603 E559 0605 E559 0610 E559 0803 E559 0805 E559 0810 E559 0815 E559 0820 E559 1003 E559 1005 E559 1010 E559 1015 E559 1020 E559 1203 E559 1205 E559 1210 E559 1215 E559 1220 E559 1230 E559 1605

E560 0303 E560 0305 E560 0403 E560 0405 E560 0410 E560 0503 E560 0505 E560 0510 E560 0603 E560 0605 E560 0610 E560 0803 E560 0805 E560 0810 E560 0815 E560 0820 E560 1003 E560 1005 E560 1010 E560 1015 E560 1020 E560 1203 E560 1205 E560 1210 E560 1215 E560 1220 E560 1230 E560 1605

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

394

VHM-ULTRA

ISO VDI 3323

E560 B0210

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

DIN Taps

d1 (h10)

0303 0305 0403 0405 0410 0503 0505 0510 0603 0605 0610 0803 0805 0810 0815 0820 1003 1005 1010 1015 1020 1203 1205 1210 1215 1220 1230 1605

• • • • • • • • • • • • • • • • • • • •

Size Ref.

E559 B0210

S Titanium & Super Alloys H Hard Materials

• • • •

ISO Taps

Frese metallo duro, 4 Taglienti, R35/38 UNI, Toriche, DIN6527L, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Fresa ideale per lavorazioni di finitura • Adatta per materiali fino a 1300 N/mm² • AlCrN per Ottimizzare vita utensile

• •

HSS Drills

Fraise 4 dents carbure, R35°/38° UNI, Torique, DIN6527L, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 35/38° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1300N/mm² • Revêtement AlCrN pour une meilleure durée de vie

• • • • • • • • • • • •

Carbide Drills

Fresas de MD, 4 ranuras, R35/38 UNI, Tórica, DIN6527L, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Para fresado de precisión de ranuras • Adecuado para materiales hasta 1300 N/mm² • AlCrN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • For precision finishing applications • Ideally suited to materials up to 1300 N/mm² • AlCrN for longer tool life

• • • • • •

Contents

Endmills Carbide, 4 Flute, R35/38 UNI, Cnr Rad, DIN6527L, Harmony

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 4 Flute, R35/38 UNI, Cnr Rad, DIN6527L, Harmony

HSS Drills

Carbide Drills

• VHM-ULTRA grade of carbide for high performance • For precision finishing applications • Ideally suited to materials up to 1300 N/mm² • AlCrN for longer tool life

ISO Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 490  Size Ref.

d1 (h10)

1610 1615 1620 1630 2005 2010 2015 2020 2030

E560 B0210

VHM-ULTRA

AlCrN

UNI

R35/38

rad

Item #

15.0

1.0

15.0

1.5

15.0

2.0

15.0

3.0

104

19.0

0.5

104

19.0

1.0

104

19.0

1.5

104

19.0

2.0

104

19.0

3.0

E559 1610 E559 1615 E559 1620 E559 1630 E559 2005 E559 2010 E559 2015 E559 2020 E559 2030

E560 1610 E560 1615 E560 1620 E560 1630 E560 2005 E560 2010 E560 2015 E560 2020 E560 2030

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• •

• • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E559 E560

• • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

20.0

E559 B0210

Tool Holding

6º

DIN Taps

Carbide Endmills

• Optimal • Effective

395

Back to index Contents

Endmills Carbide, 4 Flute, R45/44 UNI, DIN6527L, Harmony

Carbide Drills

Fresas de MD, 4 ranuras, R45/44 UNI, Tórica, DIN6527L, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Hélice de ranura variable 45/44° para fresado sin vibraciones • Adecuado para materiales hasta 1300 N/mm² • AlCrN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • 45/44° variable flute helix for chatter free milling • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

Fraise 4 dents carbure, R45°/44° UNI, DIN6527K, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 45°/44° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1600N/mm² • Revêtement AlCrN pour une meilleure durée de vie Frese metallo duro, 4 Taglienti, R45/44 UNI, DIN6527L, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 44/45° per lavorazioni senza vibrazioni • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

ISO Taps

45º

6º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 490  Size Ref.

DIN Taps Carbide Endmills HSS Endmills

0300 0350 0400 0450 0500 0550 0600 0800 1000 1200 1400 1600 1800 2000 2500

E426

E427

B0210

VHM-ULTRA

AlCrN

UNI

R45/44

d1 (e8)

Item #

3.0 3.5 4.0 4.5 5.0 5.5 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

2.8

3.3

3.8

4.3

4.8

5.3

5.7

7.6

9.5

11.5

13.5

15.5

17.5

104

19.5

120

24.0

E426 0300 E426 0350 E426 0400 E426 0450 E426 0500 E426 0550 E426 0600 E426 0800 E426 1000 E426 1200 E426 1400 E426 1600 E426 1800 E426 2000 E426 2500

E427 0300 E427 0350 E427 0400 E427 0450 E427 0500 E427 0550 E427 0600 E427 0800 E427 1000 E427 1200 E427 1400 E427 1600 E427 1800 E427 2000 E427 2500

Reamers 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

E426 E427

• • • • • • • • • • • • • • • • • • • • • •

Tech Info

396

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 4 Flute, R45/44 UNI, Cnr Rad, Long Reach, Harmony

HSS Drills

Fraise 4 dents carbure, R45°/44° UNI, Torique, Longue HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 45°/44° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1300N/mm² • Revêtement AlCrN pour une meilleure durée de vie

Carbide Drills

• VHM-ULTRA grade of carbide for high performance • 45/44° variable flute helix for chatter free milling • Suitable for materials up to 1300 N/mm² • AlCrN for longer tool life

ISO Taps

Frese metallo duro, 4 Taglienti, R45/44 UNI, Toriche, Lunga Portata, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 44/45° per lavorazioni senza vibrazioni • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

Size Ref.

d1 (e8)

0403 0405 0603 0605 0610 0615 0803 0805 0810 0815 1005 1010 1015 1020 1205 1210 1215 1220 1610 1620 1630 1640

VHM-ULTRA

AlCrN

UNI

R45/44

rad

Item #

3.6

0.3

3.6

0.5

5.4

0.3

5.4

0.5

5.4

1.0

5.4

1.5

7.2

0.3

7.2

0.5

7.2

1.0

7.2

1.5

9.0

0.5

9.0

1.0

9.0

1.5

9.0

2.0

11.0

0.5

11.0

1.0

11.0

1.5

11.0

2.0

108

15.0

1.0

108

15.0

2.0

108

15.0

3.0

108

15.0

4.0

E430 0403 E430 0405 E430 0603 E430 0605 E430 0610 E430 0615 E430 0803 E430 0805 E430 0810 E430 0815 E430 1005 E430 1010 E430 1015 E430 1020 E430 1205 E430 1210 E430 1215 E430 1220 E430 1610 E430 1620 E430 1630 E430 1640

E431 0403 E431 0405 E431 0603 E431 0605 E431 0610 E431 0615 E431 0803 E431 0805 E431 0810 E431 0815 E431 1005 E431 1010 E431 1015 E431 1020 E431 1205 E431 1210 E431 1215 E431 1220 E431 1610 E431 1620 E431 1630 E431 1640

4.0 6.0

8.0

10.0

12.0

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

E430 E431

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

16.0

E431 B0210

DIN Taps

Vc Page #: 490 

E430 B0210

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

6º

HSS Endmills

• Optimal • Effective

397

Back to index Contents

Roughers Carbide, STF, R45 UNI, DIN6527L, Harmony

Carbide Drills

Fresas de MD, Desbaste, STF, R45 UNI, DIN6527L, Harmony • Para aplicaciones de acabado y semi desbaste • Adecuado para materiales de hasta 1600 N/mm² • Diseño de ranura desigual con forma de diente especial (STF), produce un excelente acabado superficial • Elimina el uso de fresas de acabado en muchos casos

• For finishing & semi-roughing applications • Suitable for materials up to 1400 N/mm² • Unequal flute design with Special Tooth Form (STF) • Eliminates the use of finishing Endmills in many cases

HSS Drills

Fraise d’ébauche carbure, Profil STF, R45°, UNI, DIN 6527L, HARMONY • Pour la finition et la semie-ébauche • Micro brise-copeaux (STF) pour une excellente évacation dans les matériaux tendres • Convient aux matériaux jusqu’à 1400N/mm²

ISO Taps

Frese metallo duro, STF, R45 UNI, DIN6527L, Harmony • Ideale per applicazioni di finitura e semi sgrossatura • Adatta per materiali fino a 1400 N/mm² • Speciale profilo tagliente con sezioni interrotte per controllo truciolo e eccellente finitura • Evita l’uso di frese di finitura in molti casi

Tool Holding

STF

398

45º

8º

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 491 

Carbide Endmills

Size Ref.

d1 (e8)

HSS Endmills

0400 0500 0600 0800 1000 1200 1600 2000

4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

E545

E546*

B0210

VHM-ULTRA

AlCrN

UNI

R45

Item #

3.7

4.6

5.5

7.5

9.5

11.2

15.0

104

19.0

E545 0400 E545 0500 E545 0600 E545 0800 E545 1000 E545 1200 E545 1600 E545 2000

E546 0400 E546 0500 E546 0600 E546 0800 E546 1000 E546 1200 E546 1600 E546 2000

Reamers 3

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

398

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

* Not available once current stock is depleted

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • •

• • • • • •

E545 E546

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Roughers Carbide, HRS, R45 UNI, DIN6527L Harmony

Fraise d’ébauche carbure, Profil HRS, R45°, UNI, DIN 6527L, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Brise-copeaux (HRS) pour dans les matériaux à coupeaux longs • Convient aux matériaux jusqu’à 1600N/mm² • Revêtement AlCrN pour une meilleure durée de vie

399

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 491  Size Ref.

d1 (h10)

0400 0500 0600 0800 1000 1200 1400 1600 1800 2000 2500

E550 B0210

VHM-ULTRA

AlCrN

UNI

R45 HRS

Item #

3.7

4.6

5.5

7.5

9.5

11.2

E549 0400 E549 0500 E549 0600 E549 0800 E549 1000 E549 1200

13.5

15.5

17.5

104

19.0

120

24.5

E550 0400 E550 0500 E550 0600 E550 0800 E550 1000 E550 1200 E550 1400 E550 1600 E550 1800 E550 2000 E550 2500

E549 1600 E549 1800 E549 2000 E549 2500

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E549 E550

• • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

E549 B0210

DIN Taps

5º

Carbide Endmills

45º

Tool Holding

ISO Taps

Frese metallo duro rompitruciolo, HRS, R45 UNI, DIN6527L Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Geometria HR permette lavorazioni gravose su materiali di difficile lavorabilità • Ideale per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

HRS

Carbide Drills

Fresas de MD, Desbaste, HRS, R45 UNI, DIN6527L, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Adecuado para materiales de hasta 1600 N/mm² • Diseño de ranura (HRS), para gran desbaste en materiales de viruta corta y larga • AlCrN para una mayor vida útil de la herramienta

HSS Drills

• VHM-ULTRA grade of carbide for high performance • HRS geometry allows for heavy cuts in short & long chipping materials • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

• Optimal • Effective

399

Back to index Contents

Slot Drills Carbide, Ballnose, 2 Flute, R30 UNI, Long Reach

Carbide Drills

Fresas de MD, Esféricas, 2 ranuras, R30 UNI, Larga • Grado de MD, VHM-ULTRA para alto rendimiento • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • AlCrN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • For profile & contour milling in long reach applications • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

Fraise à rainurer 2 dents carbure, Hémisphérique, R30°N • VHM-ULTRA grade of carbide for high performance • For profile & contour milling in long reach applications • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life Frese metallo duro, Sferiche, 2 Taglienti, R30 UNI, Lunga Portata • VHM-ULTRA, grado di metallo duro per alte prestazione • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

ISO Taps

6º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 491  Size Ref.

DIN Taps

d1(e8)

Carbide Endmills

0200 0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E440

E441

B0210

VHM-ULTRA

AlCrN

UNI

R30

Item #

7.0

1.9

9.5

2.8

12.0

3.8

14.5

4.8

17.0

5.7

22.0

7.6

100

27.0

9.5

120

32.0

11.5

120

37.0

13.5

140

42.0

15.5

140

47.0

17.5

160

52.0

19.5

E440 0200 E440 0300 E440 0400 E440 0500 E440 0600 E440 0800 E440 1000 E440 1200 E440 1400 E440 1600 E440 1800 E440 2000

E441 0200 E441 0300 E441 0400 E441 0500 E441 0600 E441 0800 E441 1000 E441 1200 E441 1400 E441 1600 E441 1800 E441 2000

HSS Endmills Reamers 5

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

400

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • •

E440 E441

• • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, Ballnose, 4 Flute, R30 UNI, Long Reach

Carbide Drills

Fresas de MD, Esféricas, 4 ranuras, R30 UNI, Larga • Grado de MD, VHM-ULTRA para alto rendimiento • Para fresado de perfiles y contornos en aplicaciones de largo alcance • Adecuado para materiales hasta 1600 N/mm² • AlCrN para una mayor vida útil de la herramienta

• VHM-ULTRA grade of carbide for high performance • For profile & contour milling in long reach applications • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

ISO Taps

Frese metallo duro, Sferiche, 4 Taglienti, R30 UNI, Lunga Portata • VHM-ULTRA, grado di metallo duro per alte prestazione • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

Vc Page #: 491  Size Ref.

d1 (e8)

0200 0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

E443 B0210

VHM-ULTRA

AlCrN

UNI

R30

Item #

7.0

1.9

9.5

2.8

12.0

3.8

14.5

4.8

17.0

5.7

22.0

7.6

100

27.0

9.5

120

32.0

11.5

120

37.0

13.5

140

42.0

15.5

140

47.0

17.5

160

52.0

19.5

E442 0200 E442 0300 E442 0400 E442 0500 E442 0600 E442 0800 E442 1000 E442 1200 E442 1400 E442 1600 E442 1800 E442 2000

E443 0200 E443 0300 E443 0400 E443 0500 E443 0600 E443 0800 E443 1000 E443 1200 E443 1400 E443 1600 • •

P 5

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

• • • • • •

E442 E443

• • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E442 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

6º

Carbide Endmills

• Optimal • Effective

401

Back to index Contents

Endmills Carbide, 1 Flute, R30 Al, Short

Carbide Drills

Fresas de MD, 1 ranura, R30 Al, Corta • Para aleaciones de aluminio no ferrosos, como láminas y perfiles de aluminio, latón y bronce • La ranura única y grande proporciona la máxima evacuación de viruta cuando se trabaja a altas RPM y velocidades de avance • Corte central para perforaciones o rampas rectas • Adecuado para usar en husillos de alta velocidad y husillos neumáticos, para recortar plásticos y materiales similares

• For non ferrous aluminium alloys such as aluminium sheet & extrusions, brass & bronze • Large single flute provides maximum chip evacuation when ran at high RPM & feed rates • Centre cutting for straight plunging or ramping • Suitable for use in hi speed routers & air tools for trimming plastics and similar materials

HSS Drills

Fraise 1 dent carbure, R30° AL, courte • Recommandé pour l’aluminum en feuille et extrusion, les bronzes et plastiques • Grosse goujure pour une évacuation maximale pendant les utilisations à haute vitesses • Coupe au centre pour les opérations de plongées ou ramping, utilisation sous AIR recommandée pour les plastiques

ISO Taps

Frese metallo duro, 1 Taglienti, R30 Al, Corte • Ideale per material non ferrosi, leghe di alluminio, lamiere di alluminio & fusioni, ottone e bronzo • Ampio vano truciolo in un unico tagliente consentendo al massimo l’evaquoazione truciolo riferito ad alti avanzanzameneti • Tagliente al centro per consentire applicazione forante • Ideale per essere applicate su utensili pneumatici utili per taglio di aterie plastiche e similari

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 491  Size Ref.

DIN Taps

d1(h10)

Carbide Endmills

0300 0400 0500 0600 0800 1000 1200

3.0 4.0 5.0 6.0 8.0 10.0 12.0

20º

E444 B0208 VHM Brt

Al R30 HA h6

Item #

E444 0300 E444 0400 E444 0500 E444 0600 E444 0800 E444 1000 E444 1200

HSS Endmills Reamers 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E444 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • •

Tech Info

402

ISO VDI 3323

• Optimal • Effective

Slot Drills Carbide, 2 Flute, R40 AlCarb, DIN6527L Fresas de MD, 2 ranuras, R40 Al, DIN6527L • Para fresado de precisión de ranuras y cavidades • Geometría optimizada para aluminio y materiales no ferrosos • Se pueden lograr altas velocidades de corte y altas velocidades de avance • Eliminación de virutas altamente eficiente

• For precision milling of slots & cavities • Optimised geometry for aluminiums & non-ferrous materials • High speed & high feed rates can be achieved • Highly efficient chip disposal

HSS Drills

Fraise 2 dents carbure, R30° AL, courte • Pour le fraisage de rainures, de poches dans les aluminiums et non-ferreux • Utilisable en haute vitesse • Evacuation copeaux optimale

Carbide Drills

Contents

Back to index

ISO Taps

Frese metallo duro, 2 Taglienti, R40 AlCarb, DIN6527L • Fresa universale per cave e lavorazioni di finitura • Geometria tagliente ottimizzata per materiali non ferrosi & alluminio • Supporta alti avanzamenti e alte velocità di taglio • Elevata evaquazione truciolo

Size Ref.

d1 (h10)

0200 0300 0350 0400 0450 0500 0600 0700 0800 0900 1000 1200 1400 1600 1800 2000

Brt

Al R40 HA h6

chamf

Item #

0.05

0.06

0.07

0.08

0.09

0.10

0.12

0.14

0.16

0.18

104

0.20

E310 0200 E310 0300 • E310 0400 • E310 0500 E310 0600 • E310 0800 • E310 1000 E310 1200 • E310 1600 • E310 2000

ISO VDI 3323

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • •

E310 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Tech Info

Reamers

2.0 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 18.0 20.0

VHM

DIN Taps

Vc Page #: 491 

E310 B0208

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

15º

HSS Endmills

45º+

403

Back to index Contents

Endmills Carbide, 3 Flute, R45/46/44 AI, DIN6527L, Harmony

Carbide Drills

Fresas de MD, 3 ranuras, R45/46/44 Al, DIN6527L, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Hélice de ranura variable 45/46/44° para fresado sin vibraciones • Geometría optimizada para materiales blandos • CrN para cobres y materiales no ferrosos

• VHM-ULTRA grade of carbide for high performance • 45/46/44° variable flute helix for chatter free milling • Optimised geometry for soft materials • CrN for copper and non-ferrous materials

HSS Drills

Fraise 3 dents carbure, R45°/46°/44° AL, DIN6527L HARMONY • Carbure VHM Ultra pour une meilleure performance • Hélice variable 45°/46°/44° pour la suppression des vibrations • Géométrie optimisée pour les matériaux légers • Revêtement CrN pour les cuivres et non-ferreux

ISO Taps

Frese metallo duro, 3 Taglienti, R45/46/44 AI, DIN6527L, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 45/46/44° per lavorazioni senza vibrazioni • Geometria ottimizzata per materiali morbidi • CrN specifico per le lavorazioni di rame e materiali non ferrosi

15º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 491  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills

0600 0800 1000 1200 1400 1600 1800 2000 2500

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

E400

E401

B0210

VHM-ULTRA

CrN

R45/46/44

rad

Item #

0.2

0.3

0.4

0.5

104

0.6

120

0.6

E400 0600 E400 0800 E400 1000 E400 1200 E400 1400 E400 1600 E400 1800 E400 2000 E400 2500

E401 0600 E401 0800 E401 1000 E401 1200 E401 1400 E401 1600 E401 1800 E401 2000 E401 2500

HSS Endmills Reamers 1

M 8

E400 E401 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

404

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 3 Flute, R45/46/44 Al, Long Reach, Harmony

HSS Drills

Carbide Drills

Fresas de MD, 3 ranuras, R45/46/44 Al, Larga, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Hélice de ranura variable 45/46/44° para fresado sin vibraciones • Geometría optimizada para materiales blandos • CrN para cobres y materiales no ferrosos

• VHM-ULTRA grade of carbide for high performance • 45/46/44° variable flute helix for chatter free milling • Optimised geometry for soft materials • CrN for copper and non-ferrous materials

ISO Taps

Frese metallo duro, 3 Taglienti, R45/46/44 Al, Lunga Portata, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 45/46/44° per lavorazioni senza vibrazioni • Geometria ottimizzata per materiali morbidi • CrN specifico per le lavorazioni di rame e materiali non ferrosi

Vc Page #: 492  Size Ref.

d1 (k10)

0600 0800 1000 1200 1400 1600 1800 2000 2500

E403 B0210

VHM-ULTRA

CrN

R45/46/44

rad

Item #

5.0

0.2

7.0

0.2

9.0

0.3

11.0

0.4

E402 0600 E402 0800 E402 1000 E402 1200 E402 1400 E402 1600 E402 1800 E402 2000 E402 2500

E403 1000 E403 1200 E403 1400 E403 1600 E403 1800 E403 2000 E403 2500

13.0

0.4

108

15.0

0.5

108

17.0

0.5

126

19.0

0.6

150

24.0

0.6

ISO VDI 3323

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • • • • • •

E402 E403

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

Tech Info

Reamers

HSS Endmills

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

E402 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

15º

Carbide Endmills

• Optimal • Effective

405

Back to index Contents

Endmills Carbide, Ballnose, 3 Flute, R45/46/44 AI, Long Reach, Harmony

Carbide Drills

• VHM-ULTRA grade of carbide for high performance • 45/46/44° variable flute helix for chatter free milling • Optimised geometry for soft materials • CrN for copper and non-ferrous materials

HSS Drills

Fraise 3 dents carbure, Hémisphérique, R45°/46°/44° Longue, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Pour le fraisage de formes et de poches profondes • Hélice variable 45°/46°/44° pour la suppression des vibrations • Géométrie optimisée et revêtement CrN pour les non-ferreux et cuivres

Fresas de MD, Esférica, 3 ranuras, R45/46/44 Al, Larga, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Hélice de ranura variable 45/46/44° para fresado sin vibraciones • Geometría optimizada para materiales blandos • CrN para cobres y materiales no ferrosos

ISO Taps

Frese metallo duro, Sferiche, 3 Taglienti, R45/46/44 AI, Lunga Portata, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 45/46/44° per lavorazioni senza vibrazioni • Geometria ottimizzata per materiali morbidi • CrN specifico per le lavorazioni di rame e materiali non ferrosi

15º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 493  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills

0600 0800 1000 1200 1400 1600 1800 2000 2500

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

E408

E409

B0210

VHM-ULTRA

CrN

R45/46/44

Item #

108

126

150

E408 0600 E408 0800 E408 1000 E408 1200 E408 1400 E408 1600 E408 1800 E408 2000 E408 2500

E409 0600 E409 0800 E409 1000 E409 1200 E409 1400 E409 1600 E409 1800 E409 2000 E409 2500

HSS Endmills Reamers 1

M 8

E408 E409 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

406

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 3 Flute, R45/46/44 AI, DIN6527L, Harmony • VHM-ULTRA grade of carbide for high performance • 45/46/44° variable flute helix for chatter free milling • Optimised geometry for soft materials

HSS Drills

Fraise 3 dents carbure, R45°/46°/44° AL, Longue HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 45°/46°/44° pour la suppression des vibrations • Géométrie optimisée les non-ferreux et cuivres Frese metallo duro, 3 Taglienti, R45/46/44 Al, Lunga Portata, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Elica tagliente variabile 45/46/44° per lavorazioni senza vibrazioni • Geometria ottimizzata per materiali morbidi

ISO Taps

Vc Page #: 492  Size Ref.

d1 (e8)

0300 0400 0500 0600 0800 1000 1200 1600 2000

VHM-ULTRA Brt

Al R45/46/44 HA h5

Chamfer

Item #

2.8

0.08/0.12 x 45°

3.7

0.08/0.12 x 45°

4.6

0.08/0.12 x 45°

5.1

0.08/0.12 x 45°

7.1

0.08/0.12 x 45°

9.1

0.15/0.25 x 45°

11.1

0.15/0.25 x 45°

14.8

0.25/0.35 x 45°

104

18.5

0.25/0.35 x 45°

E480 0300 E480 0400 E480 0500 E480 0600 E480 0800 E480 1000 E480 1200 E480 1600 E480 2000

P 1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E480 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0

E480 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

15º

Carbide Endmills

45º

407

Back to index Contents

Endmills Carbide, 3 Flute, R45/46/44 AI, Rad, DIN6527L, Harmony

Carbide Drills

• VHM-ULTRA grade of carbide for high performance • 45/46/44° variable flute helix for chatter free milling • Optimised geometry for soft materials Fraise 3 dents carbure, R45°/46°/44° AL, Longue HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 45°/46°/44° pour la suppression des vibrations • Géométrie optimisée les non-ferreux et cuivres

HSS Drills

ISO Taps

15º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 492  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills

1210 1225 1230 1240 1610 1625 1630 1640 2010 2025 2030 2040

12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 20.0 20.0 20.0 20.0

E478 B0210 VHM-ULTRA Brt

Al R45/46/44 HA h5

rad

Item #

11.1

2.5

11.1

14.8

2.5

14.8

104

18.5

104

18.5

2.5

104

18.5

104

18.5

E478 1210 E478 1225 E478 1230 E478 1240 E478 1610 E478 1625 E478 1630 E478 1640 E478 2010 E478 2025 E478 2030 E478 2040

HSS Endmills Reamers 1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E478 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • •

Tech Info

408

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Contents

Back to index

Roughers Carbide, NR (normal), R25 Al, DIN 6527L

Carbide Drills

Fresas Desbaste, NR (normal), R25 Al, DIN6527L • Para aplicaciones de desbaste • La geometría NR permite grandes pasadas • Adecuado para materiales no ferrosos y aluminio aleado • Ángulo de corte positivo, para materiales de viruta larga

• For roughing applications • NR geometry allows for heavy cuts • For soft non ferrous aluminium alloys • High rake angle for long chipping materials

HSS Drills

Fraise d’ébauche, Profil NR, R25° AL, DIN 6527L • Carbure VHM-ULTRA pour une meilleure performance • Hélice variable 45°/46°/44° pour la suppression des vibrations • Géométrie optimisée et revêtement CrN pour les non-ferreux et cuivres

ISO Taps

Frese metallo duro rompitruciolo, NR (normal), R25 Al, DIN 6527L • Fresa ideale per lavorazioni di sgrossatura • Geometria NR permette lavorazioni gravose • Ideale per materiali morbidi o non ferrosi • Elevato angolo di spoglia per lavorazione di meteriale con difficile truciolabilità

Vc Page #: 492  Size Ref.

d1 (h10)

0600 0800 1000 1200 1400 1600 1800 2000

E447 B0208

VHM

Brt

R25 NR

Item #

104

E446 0600 E446 0800 E446 1000 E446 1200 • E446 1600 • E446 2000

E447 0600 E447 0800 E447 1000 E447 1200 • E447 1600 • E447 2000

P 1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • •

E446 E447

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E446 B0208

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

15º

Carbide Endmills

• Optimal • Effective

409

Back to index Contents

Endmills Carbide, 3 Flute, R55/54/56 VA, DIN6527L, Harmony

Carbide Drills

• VHM-ULTRA grade of carbide for high performance • Optimised geometry for stainless steels • 55/54/56° variable flute helix for chatter free milling • Universal use for slotting and finishing with the one tool • Helica for superior wear resistance in stainless steel

HSS Drills

Fraise 3 dents carbure, R55°/54°/56° VA, DIN6527L HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Recommandé pour les inox • Hélice variable 55°/54°/56° pour la suppression des vibrations • Revêtement HELICA pour une meilleure durée de vie

Fresas de MD, 3 Ranuras, R55/54/56 VA, DIN6527L, Harmony • Grado de MD, VHM-ULTRA para alto rendimiento • Geometría optimizada para aceros inoxidables • 55/54/56° hélice de ranura variable para fresado sin vibraciones • Uso universal para ranurado y acabado con una herramienta • Helica para una resistencia al desgaste superior, en acero inoxidable

ISO Taps

Frese metallo duro, 3 Taglienti, R55/54/56 VA, DIN6527L, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Geometria ottimizzata per acciai inossidabili • Elica tagliente variabile 55/54/64° per lavorazioni senza vibrazioni • Fresa universale per lavorazioni di cave e finitura di precisione • Helica per consentire una resistenza all’usura superiore su acciai inossidabili

12º

45º Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 493  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E410

E411

B0210

VHM-ULTRA

HELICA

R55/54/56

Item #

2.8

3.8

4.8

5.7

7.6

9.5

11.5

13.5

15.5

17.5

104

19.5

E410 0300 E410 0400 E410 0500 E410 0600 E410 0800 E410 1000 E410 1200 E410 1400 E410 1600 E410 1800 E410 2000

E411 0300 E411 0400 E411 0500 E411 0600 E411 0800 E411 1000 E411 1200 E411 1400 E411 1600 E411 1800 E411 2000

HSS Endmills Reamers 4

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

410

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • •

• • • •

E410 E411

• • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, 4 Flute, R40/42 VA, DIN6527L, Harmony • Excellent solution for stainless steels tough materials • Optimised geometry with variable helix design ensures high productivity • Suitable for universal applications with the one tool Fraise 4 dents carbure, R40°/42° VA, DIN6527L, HARMONY • Excellente sollution pour les inox et certains Super Alliages • Hélice variable 40°/42° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1600N/mm²

HSS Drills

watch the video

Frese metallo duro, 4 Taglienti, R40/42 VA, DIN6527L, Harmony • Eccellente soluzione per lavorazioni di acciai inossidalibi & super leghe • Geometria tagliente variabile, ottimizzata per consentire alta produttività • ideale per esecuzione di cave, contornature e finiture precise con un unico utensile

Tool Holding

Vc Page #: 493  Size Ref.

d1 (e8)

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

E460 B0210

VHM-ULTRA

HELICA

R40/42

Item #

2.8

3.8

4.8

5.7

7.6

9.5

11.5

13.5

15.5

17.5

104

19.5

E459 0300 E459 0400 E459 0500 E459 0600 E459 0800 E459 1000 E459 1200 E459 1400 E459 1600 E459 1800 E459 2000

E460 0300 E460 0400 E460 0500 E460 0600 E460 0800 E460 1000 E460 1200 E460 1400 E460 1600 E460 1800 E460 2000

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

E459 E460

• • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E459 B0210

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

DIN Taps

12º

HSS Endmills

45º

ISO Taps

Fresas de MD, 4 Ranuras, R40/42 VA, DIN6527L, Harmony • Excelente solución para aceros inoxidables y materiales difíciles, como súper aleaciónes • La geometría optimizada con diseño de hélice variable garantiza una alta productividad • Adecuado para aplicaciones de ranurado, corte lateral y acabado con una herramienta

• Optimal • Effective

411

Back to index

Fraise 4 dents carbure, R40°/42° VA, Torique, DIN6527L, HARMONY • Excellente sollution pour les inox et certains Super Alliages • Hélice variable 40°/42° pour la suppression des vibrations • Convient aux matériaux jusqu’à 1600N/mm²

watch the video

HSS Drills

Frese metallo duro, 4 Taglienti, R40/42 VA, Toriche, DIN6527L, Harmony • Eccellente soluzione per lavorazioni di acciai inossidalibi & super leghe • Geometria tagliente variabile, ottimizzata per consentire alta produttività • ideale per esecuzione di cave, contornature e finiture precise con un unico utensile

ISO Taps

Fresas de MD, 4 Ranuras, R40/42 VA, Tórica, DIN6527L, Harmony • Excelente solución para aceros inoxidables y materiales difíciles, como súper aleaciónes • La geometría optimizada con diseño de hélice variable garantiza una alta productividad • Adecuado para aplicaciones de ranurado, corte lateral y acabado con una herramienta

12º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 493  6.0 8.0

Carbide Endmills

10.0

12.0

HSS Endmills

16.0

Reamers

20.0

Tech Info

E462 E463

HELICA

R40/42

rad

Item #

21 21 21 27 27 27 27 27 32 32 32 32 32 38 38 38 38 38 38 44 44 44 44 44 44 44 54 54 54 54 54 54

6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 12 16 16 16 16 16 16 16 20 20 20 20 20 20

5.5 5.5 5.5 7.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 9.5 9.5 11.2 11.2 11.2 11.2 11.2 11.2 15.0 15.0 15.0 15.0 15.0 15.0 15.0 19.0 19.0 19.0 19.0 19.0 19.0

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

0.3 0.5 1.0 0.3 0.5 1.0 1.5 2.0 0.3 0.5 1.0 1.5 2.0 0.3 0.5 1.0 1.5 2.0 3.0 0.5 1.0 1.5 2.0 2.5 3.0 4.0 0.5 1.0 1.5 2.0 3.0 4.0

E462 0603 E462 0605 E462 0610 E462 0803 E462 0805 E462 0810 E462 0815 E462 0820 E462 1003 E462 1005 E462 1010 E462 1015 E462 1020 E462 1203 E462 1205 E462 1210 E462 1215 E462 1220 E462 1230 E462 1605 E462 1610 E462 1615 E462 1620 E462 1625 E462 1630 E462 1640 E462 2005 E462 2010 E462 2015 E462 2020 E462 2030 E462 2040

E463 0603 E463 0605 E463 0610 E463 0803 E463 0805 E463 0810 E463 0815 E463 0820 E463 1003 E463 1005 E463 1010 E463 1015 E463 1020 E463 1203 E463 1205 E463 1210 E463 1215 E463 1220 E463 1230 E463 1605 E463 1610 E463 1615 E463 1620

M 8

E463 1630 E463 1640 E463 2005 E463 2010 E463 2015 E463 2020 E463 2030 E463 2040

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

412

VHM-ULTRA

HELICA

13 13 13 19 19 19 19 19 22 22 22 22 22 26 26 26 26 26 26 32 32 32 32 32 32 32 38 38 38 38 38 38

P 1

VHM-ULTRA

ISO VDI 3323

E463 B0210

57 57 57 63 63 63 63 63 72 72 72 72 72 83 83 83 83 83 83 92 92 92 92 92 92 92 104 104 104 104 104 104

• • • • • • • • • • • • • • • • • • • • • •

DIN Taps

d1 (e8)

0603 0605 0610 0803 0805 0810 0815 0820 1003 1005 1010 1015 1020 1203 1205 1210 1215 1220 1230 1605 1610 1615 1620 1625 1630 1640 2005 2010 2015 2020 2030 2040

• • • • • • • • • • • • • • • •

Size Ref.

E462 B0210

S Titanium & Super Alloys H Hard Materials

• • • •

Carbide Drills

• Excellent solution for stainless steels tough materials • Optimised geometry with variable helix design ensures high productivity • Suitable for universal applications with the one tool

• • • • • • • • • • • • • • • •

Contents

Endmills Carbide, 4 Flute, R40/42 VA, Cnr Rad, DIN6527L, Harmony

• Optimal • Effective

VA-R • Variable Helix minimises vibrations for stable machining • Heavy duty core structure, enables highest metal removal rates • Sinusoidal profile provides easy evacuation in heavy cutting •A lCrN coating provides outstanding heat resistance & minimises tool wear • Necked for extra reach

Fresa de desbaste en Carburo, R39/41 VA-R, DIN6527L Harmony • La Hélice Variable minimiza la vibración para un mecanizado estable • Núcleo reforzado para evitar flexión, permite volumenes alto de arranque de viruta • Perfil sinusoidal que permite una fácil evacuación en corte pesado • Filo con mircogeometría para una mayor estabilidad

HSS Drills

Fraise d'ébauche carbure hélice variable R39/41 VA-R DIN6527L Harmony • Hélice variable pour la suppression des vibrations • Structure renforcé pour le gros débit copeaux • Profil sinusiodal pour une évacuation parfaite des copeaux • Revêtement AlCrN pour une meilleure résistance • Micro protection d'arete pour une meilleure stabilité

45º

0400 0500 0600 0800 1000 1200 1600 2000 2500

AlCrN

VA-R R39/41 HA h6

Item #

3.8

4.8

5.8

7.6

9.5

11.5

15.5

104

19.5

121

24.5

E488 0400 E488 0500 E488 0600 E488 0800 E488 1000 E488 1200 E488 1600 E488 2000 E488 2500

P 2

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • •

E488

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 25.0

VHM-ULTRA

DIN Taps

d1 (e8)

B0210

Carbide Endmills

Vc Page #: 493  Size Ref.

E488

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

ISO Taps

Sgrossatura Metallo duro, R39/41 VA-R DIN6527L Harmony • Elica variabile per minimizzare le vibrazioni e avere una lavorazione stabile • Nocciolo fresa irrobustito, adatto per i più alti volumi di asportazione truciolo • Profilo sinusoidale per fornire una facile evquazione truciolo nelle alte asportazioni • Micro protezione dello spigolo tagliente per aumentarne stabilità AlCrN per Ottimizzare vita utensile HRS

Carbide Drills

Roughers Carbide, R39/41 VA-R, DIN6527L, Harmony

Contents

Back to index

413

Back to index Contents

Endmills Carbide, 6-8 Flute, R50/35 NH, DIN6527L, Harmony

Carbide Drills

Fresas de MD, 6-8 ranuras, R50/35 NH, DIN6527L, Harmony • Grado de carburo VHM-ULTRA para alto rendimiento • Para aplicaciones de super acabado • Hélice de ranura variable de 50/35° para fresado sin vibraciones • Geometría optimizada para materiales de viruta corta hasta 48HrC • AlCrN para una mayor vida de la herramienta

• VHM-ULTRA grade of carbide for high performance • For super fine finishing applications • 50/35° variable flute helix for chatter free milling • Suitable for hard, short chipping materials up to 48 HRC • AlCrN for longer tool life

HSS Drills

Fraise carbure Multi-Dents, R50°/35° NH, DIN6527L, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Pour la super finition • Hélice variable 50°/35° pour la suppression des vibrations • Convient pour les matériaux à copeaux courts jusqu’à 48 HRC • AlCrN pour une meilleure durée de vie

ISO Taps

Frese metallo duro, 6-8 Taglienti, R50/35 NH, DIN6527L, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Fresa specifica per finiture ad altissima precisione • Elica tagliente variabile 50/35° per lavorazioni senza vibrazioni • Ideale per materiale duri, con truciolo corto fino a 48 HRC • AlCrN per Ottimizzare vita utensile

6º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 493  Size Ref.

DIN Taps Carbide Endmills

0600 0800 1000 1200 1400 1600 1800 2000 2500

E432

E433

B0210

VHM-ULTRA

AlCrN

R50/35

d1 (e8)

Item #

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

104

120

E432 0600 E432 0800 E432 1000 E432 1200 E432 1400 E432 1600 E432 1800 E432 2000 E432 2500

E433 0600 E433 0800 E433 1000 E433 1200 E433 1400 E433 1600 E433 1800 E433 2000 E433 2500

HSS Endmills Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

414

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • •

• • • •

• •

• • • • • • • • • • • •

E432 E433

• • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 6-8 Flute, R50/35 NH, Extra Long, Harmony

Carbide Drills HSS Drills

6º

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 493  Size Ref.

d1 (e8)

0600 0800 1000 1200 1600 2000 2500

E435 B0210

VHM-ULTRA

AlCrN

R50/35

Item #

108

126

150

E434 0600 E434 0800 E434 1000 E434 1200 E434 1600 E434 2000 E434 2500

E435 0600 E435 0800 E435 1000 E435 1200 E435 1600 E435 2000 E435 2500

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • •

• • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • •

E434 E435

• • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

6.0 8.0 10.0 12.0 16.0 20.0 25.0

E434 B0210

Tool Holding

ISO Taps

Frese metallo duro, 6-8 Taglienti, R50/35 NH, Extra Lunga, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Fresa specifica per finiture ad altissima precisione • Elica tagliente variabile 50/35° per lavorazioni senza vibrazioni • Ideale per materiale duri, con truciolo corto fino a 48 HRC • AlCrN per Ottimizzare vita utensile

DIN Taps

Fraise carbure Multi-Dents, R50°/35° NH,Extra-Longue, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Pour la super finition • Hélice variable 50°/35° pour la suppression des vibrations • Convient pour les matériaux à copeaux courts jusqu’à 48 HRC • AlCrN pour une meilleure durée de vie

Fresas de MD, 6-8 ranuras, R50/35 NH, Extra Larga, Harmony • Grado de carburo VHM-ULTRA para alto rendimiento • Para aplicaciones de super acabado • Hélice de ranura variable de 50/35° para fresado sin vibraciones • Geometría optimizada para materiales de viruta corta hasta 48HrC • AlCrN para una mayor vida de la herramienta

Carbide Endmills

• Optimal • Effective

415

Back to index Contents

Endmills Carbide, 6-8 Flute, R50/35 NH, Cnr Rad, Long Reach, Harmony

Carbide Drills

Fresas de MD, 6-8 ranuras, R50/35 NH, Tórica, Larga, Harmony • Grado de carburo VHM-ULTRA para alto rendimiento • Para aplicaciones de super acabado • Hélice de ranura variable de 50/35° para fresado sin vibraciones • Geometría optimizada para materiales de viruta corta hasta 48HrC • AlCrN para una mayor vida de la herramienta

HSS Drills

Fraise carbure Multi-Dents, R50°/35° NH, Torique, Extra-Longue, HARMONY • Carbure VHM-ULTRA pour une meilleure performance • Pour la super finition • Hélice variable 50°/35° pour la suppression des vibrations • Convient pour les matériaux à copeaux courts jusqu’à 48 HRC • AlCrN pour une meilleure durée de vie

ISO Taps

Frese metallo duro, 6-8 Taglienti, R50/35 NH, Toriche, Lunga Portata, Harmony • VHM-ULTRA, grado di metallo duro per alte prestazione • Fresa specifica per finiture ad altissima precisione • Elica tagliente variabile 50/35° per lavorazioni senza vibrazioni • Ideale per materiale duri, con truciolo corto fino a 48 HRC • AlCrN per Ottimizzare vita utensile

6º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 493  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills HSS Endmills

0605 0610 0805 0810 1005 1010 1015 1020 1205 1210 1215 1220 1605 1610 1615 1620 2005 2010 2015 2020

VHM-ULTRA

AlCrN

R50/35

rad

Item #

0.5

1.0

0.5

1.0

0.5

1.0

1.5

2.0

0.5

1.0

1.5

2.0

108

0.5

108

1.0

108

1.5

108

2.0

126

0.5

126

1.0

126

1.5

126

2.0

E436 0605 E436 0610 E436 0805 E436 0810 E436 1005 E436 1010 E436 1015 E436 1020 E436 1205 E436 1210 E436 1215 E436 1220 E436 1605 E436 1610 E436 1615 E436 1620 E436 2005 E436 2010 E436 2015 E436 2020

E437 0605 E437 0610 E437 0805 E437 0810 E437 1005 E437 1010 E437 1015 E437 1020 E437 1205 E437 1210 E437 1215 E437 1220 E437 1605 E437 1610 E437 1615 E437 1620 E437 2005 E437 2010 E437 2015 E437 2020

8.0 10.0

12.0

20.0

E437 B0210

6.0

16.0

E436 B0210

Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

416

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• • • •

• • • • • • • • • • • • • •

• • • •

• •

• • • • • • • • • • • •

E436 E437

• • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 6-8 Flute, R45 NH, DIN6527L, Harmony

HSS Drills

Fraise carbure Multi-Dents, R45° NH, DIN6527L, HARMONY • Pour la super finition • Convient pour les matériaux jusqu’à 56 HRC • Multi-dents avec un noyeau renforcé • AlCrN pour une meilleure durée de vie

Carbide Drills

Fresas de MD, 6-8 ranuras, R45 NH, DIN6527L, Harmony • Para aplicaciones de acabado súper fino • Adecuado para diversos materiales hasta 56HrC • El diseño de múltiples ranuras y núcleo robusto, permite altas velocidades de avance • AlCrN para una mayor vida útil de la herramienta

• For super fine finishing applications • Suitable for various materials up to 56 HRC • Multi-flute & heavy core design enable high feed rates • AlCrN for longer tool life

ISO Taps

Frese metallo duro, 6-8 Taglienti, R45 NH, DIN6527L, Harmony • Fresa specifica per finiture ad altissima precisione • Ideale per vari materiali duri fino a 56 HRC • Multi tagliente con nocciolo fresa rinforzato per consentire alti avanzamenti • AlCrN per Ottimizzare vita utensile

Vc Page #: 493  Size Ref.

d1 (h10)

0600 0800 1000 1200 1600 2000

E544 B0210

VHM-ULTRA

AlCrN

R45

Item #

5.5

7.5

9.5

11.2

15.0

104

19.0

E543 0600 E543 0800 E543 1000 E543 1200 E543 1600 E543 2000

E544 0600 E544 0800 E544 1000 E544 1200 E544 1600 E544 2000

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• •

• • • • • • • •

• •

E543 E544

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

Carbide Endmills

6.0 8.0 10.0 12.0 16.0 20.0

E543 B0210

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

10º

• Optimal • Effective

417

Back to index Contents

Endmills Carbide, 4 Flute, R50 NH, DIN6527L, Harmony DUO

Carbide Drills

Fresas de MD, 4 Ranuras, R50 NH, DIN6527L, Harmony DUO • Doble núcleo escalonado para una estabilidad óptima • Diseño ideal para fresado con sistemas MQL y HSC • Adecuado para materiales hasta 48 HRC • AlCrN para una mayor vida útil de la herramienta

• Dual stepped core for optimal stability • Ideal design for pocket milling in MQL & HSC • Suitable for materials up to 48 HRC • AlCrN for longer tool life

HSS Drills

Fraise 4 dents carbure, R50° NH, DIN6527L, HARMONY DUO • Double goujures • Ideale pour les ébauches de poches en MQL & HSC • Convient aux matériaux jusqu’à 48 HRC et les super alliages • Revêtement AlCrN pour une meilleure durée de vie

watch the video

Frese metallo duro, 4 Taglienti, R50 NH, DIN6527L, Harmony DUO • Doppio gradino al nocciolo per un ottima stabilità durante la lavorazione • Progettata per la formazione di tasche con strategia MQL & HSC • Ideale per materiale duri fino a 48 HRC • AlCrN per Ottimizzare vita utensile

ISO Taps

45º Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 494  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

0600 0800 1000 1200 1400 1600 2000

6.0 8.0 10.0 12.0 14.0 16.0 20.0

E562

E563

B0210

VHM-ULTRA

AlCrN

R50

Item #

5.5

7.5

9.5

11.2

13.0

15.0

104

19.0

E562 0600 E562 0800 E562 1000 E562 1200 E562 1400 E562 1600 E562 2000

E563 0600 E563 0800 E563 1000 E563 1200 E563 1400 E563 1600 E563 2000

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

418

S Titanium & Super Alloys H Hard Materials

• •

• • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

• •

• • • •

• •

• • • •

E562 E563

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Fraise 4 dents carbure, R50° NH, Torique, DIN6527L, HARMONY DUO • Carbure VHM-ULTRA pour une meilleure performance • Double goujures • Ideale pour les ébauches de poches en MQL & HSC • Convient aux matériaux jusqu’à 48 HRC et les super alliages • Revêtement AlCrN pour une meilleure durée de vie

Fresas de MD, 4 Ranuras, R50 NH, Tórica, DIN6527L, Harmony DUO • Grado de MD, VHM-ULTRA para alto rendimiento • Doble núcleo escalonado para una estabilidad óptima • Diseño ideal para fresado con sistemas MQL y HSC • Adecuado para materiales hasta 48 HRC • AlCrN para una mayor vida útil de la herramienta

watch the video

HSS Drills

• VHM-ULTRA grade of carbide for high performance • Dual stepped core for optimal stability • Ideal design for pocket milling in MQL & HSC • Suitable for materials up to 48 HRC • AlCrN for longer tool life

Carbide Drills

Endmills Carbide, 4 Flute, R50 NH, Cnr Rad, DIN6527L, Harmony DUO

ISO Taps

Frese metallo duro, 4 Taglienti, R50 NH, Toriche, DIN6527L, Harmony DUO • VHM-ULTRA, grado di metallo duro per alte prestazione • Doppio gradino al nocciolo per un ottima stabilità durante la lavorazione • Progettata per la formazione di tasche con strategia MQL & HSC • Ideale per materiale duri fino a 48 HRC • AlCrN per Ottimizzare vita utensile

rad

Item #

5.5

0.3

5.5

0.5

5.5

1.0

7.5

0.3

7.5

0.5

7.5

1.0

7.5

1.5

7.5

2.0

9.5

0.3

9.5

0.5

9.5

1.0

9.5

1.5

9.5

2.0

11.2

0.3

11.2

0.5

11.2

1.0

11.2

1.5

11.2

2.0

11.2

2.5

11.2

3.0

11.2

4.0

13.0

0.3

13.0

0.5

13.0

1.0

13.0

1.5

13.0

2.0

13.0

3.0

15.0

0.5

E564 0603 E564 0605 E564 0610 E564 0803 E564 0805 E564 0810 E564 0815 E564 0820 E564 1003 E564 1005 E564 1010 E564 1015 E564 1020 E564 1203 E564 1205 E564 1210 E564 1215 E564 1220 E564 1225 E564 1230 E564 1240 E564 1403 E564 1405 E564 1410 E564 1415 E564 1420 E564 1430 E564 1605

E565 0603 E565 0605 E565 0610 E565 0803 E565 0805 E565 0810 E565 0815 E565 0820 E565 1003 E565 1005 E565 1010 E565 1015 E565 1020 E565 1203 E565 1205 E565 1210 E565 1215 E565 1220 • E565 1230 • E565 1403 E565 1405 E565 1410 E565 1415 E565 1420 E565 1430 E565 1605

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • •

16.0

• • • •

14.0

• •

12.0

• •

10.0

DIN Taps

Carbide Endmills

R50

HSS Endmills

R50

• •

E564 E565

AlCrN

8.0

VHM-ULTRA

AlCrN

6.0

ISO VDI 3323

VHM-ULTRA

d1 (h10)

• •

0603 0605 0610 0803 0805 0810 0815 0820 1003 1005 1010 1015 1020 1203 1205 1210 1215 1220 1225 1230 1240 1403 1405 1410 1415 1420 1430 1605

• • • •

Size Ref.

E565 B0210

Reamers

Vc Page #: 494 

E564 B0210

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

• Optimal • Effective

419

Back to index Contents

Endmills Carbide, 4 Flute, R50 NH, Cnr Rad, DIN6527L, Harmony DUO

Carbide Drills

HSS Drills

ISO Taps

r Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 494  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

1610 1615 1620 1625 1630 1640 2005 2010 2015 2020 2025 2030 2040

20.0

E564

E565

B0210

VHM-ULTRA

AlCrN

R50

rad

Item #

15.0

1.0

15.0

1.5

15.0

2.0

15.0

2.5

15.0

3.0

15.0

4.0

104

19.0

0.5

104

19.0

1.0

104

19.0

1.5

104

19.0

2.0

104

19.0

2.5

104

19.0

3.0

104

19.0

4.0

E564 1610 E564 1615 E564 1620 E564 1625 E564 1630 E564 1640 E564 2005 E564 2010 E564 2015 E564 2020 E564 2025 E564 2030 E564 2040

E565 1610 E565 1615 E565 1620 • E565 1630 E565 1640 E565 2005 E565 2010 E565 2015 E565 2020 • E565 2030 E565 2040

HSS Endmills Reamers M

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

420

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• •

• • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • •

• •

• • • •

• •

• • • •

E564 E565

• •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 4 Flute, R50 VH, DIN6527L, Harmony DUO

Fraise 4 dents carbure, R50° VH, DIN6527L, HARMONY DUO • Double goujures • Ideale pour les opérations de fraisage difficiles • Convient aux matériaux jusqu’à 63 HRC • Revêtement Aldura pour une meilleure durée de vie

Carbide Drills

Fresas de MD, 4 Ranuras, R50 VH, DIN6527L, Harmony DUO • Doble núcleo escalonado para una resistencia óptima • Diseño ideal para mecanizado duro • Adecuado para materiales hasta 63HrC • Aldura para una mayor vida útil de la herramienta

• Dual stepped core for optimal strength • Ideal design for hard machining • Suitable for materials up to 63 HRC • Aldura for longer tool life

HSS Drills

watch the video

ISO Taps

Frese metallo duro, 4 Taglienti, R50 VH, DIN6527L, Harmony DUO • Doppio gradino al nocciolo per un ottima stabilità durante la lavorazione • Progettata per lavorazioni gravose • Ideale per materiali fino a 63 HRC • Aldura per Ottimizzare vita utensile

Size Ref.

d1 (h10)

0600 0800 1000 1200 1400 1600 2000

VHM-ULTRA

Aldura

R50

Item #

5.5

7.5

9.5

11.2

13.0

15.0

104

19.0

E566 0600 E566 0800 E566 1000 E566 1200 E566 1400 E566 1600 E566 2000

E567 0600 E567 0800 E567 1000 E567 1200 E567 1400 E567 1600 E567 2000

P 1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • •

E566 E567 S Titanium & Super Alloys H Hard Materials

• •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

6.0 8.0 10.0 12.0 14.0 16.0 20.0

E567 B0210

DIN Taps

Vc Page #: 494 

E566 B0210

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

45º

• Optimal • Effective

421

Back to index Contents

Endmills Carbide, 4 Flute, R50 VH, Cnr Rad, DIN6527L, Harmony DUO

Carbide Drills

• VHM-ULTRA grade of carbide for high performance • Dual stepped core for optimal strength • Ideal design for hard machining • Suitable for materials up to 63 HRC • Aldura for longer tool life

HSS Drills

Fraise 4 dents carbure, R50° NH, Torique, DIN6527L, HARMONY DUO • Carbure VHM-ULTRA pour une meilleure performance • Double goujures • Ideale pour les opérations de fraisage difficiles • Convient aux matériaux jusqu’à 63 HRC • Revêtement Aldura pour une meilleure durée de vie

ISO Taps

Frese metallo duro, 4 Taglienti, R50 VH, Toriche, DIN6527L, Harmony DUO • VHM-ULTRA, grado di metallo duro per alte prestazione • Doppio gradino al nocciolo per un ottima stabilità durante la lavorazione • Progettata per lavorazioni gravose • Ideale per materiali fino a 63 HRC • Aldura per Ottimizzare vita utensile

Fresas de MD, 4 Ranuras, R50 VH, Tórica, DIN6527L, Harmony DUO • Grado de MD, VHM-ULTRA para alto rendimiento • Doble núcleo escalonado para una resistencia óptima • Diseño ideal para mecanizado duro • Adecuado para materiales hasta 63HrC • Aldura para una mayor vida útil de la herramienta

r Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 494  Size Ref.

DIN Taps

d1 (h10)

Carbide Endmills

0610 0820 1020 1230 1430 1640 2040

6.0 8.0 10.0 12.0 14.0 16.0 20.0

E568

E569

B0210

VHM-ULTRA

Aldura

R50

rad

Item #

5.5

1.0

7.5

2.0

9.5

2.0

11.2

3.0

13.0

3.0

15.0

4.0

104

19.0

4.0

E568 0610 E568 0820 E568 1020 E568 1230 E568 1430 E568 1640 E568 2040

E569 0610 E569 0820 E569 1020 E569 1230 E569 1430 E569 1640 E569 2040

HSS Endmills Reamers 2

M 8

E568 E569 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

422

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• •

• • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Endmills Carbide, 5 Flute, R40/42Ti, DIN6527L, Harmony Fresas de MD, 5 Ranuras, R40/42 Ti, DIN6527L, Harmony • Filo facetado para aplicaciones de acabado • Optimizado para una mayor vida útil de la herramienta en aleaciones de titanio • Diseño de hélice variable para suprimir vivraciones • Núcleo cónico para aumentar la rigidez • AlNova para una excelente resistencia a la oxidación y dureza en caliente

• Square end for finishing applications • Optimised for longer tool life in Titanium Alloys • Variable helix design to suppress vibration • Web taper to increase rigidity • AlNova for outstanding oxidation resistance and hot hardness

HSS Drills

Fraise 5 dents carbure, R40°/42° Ti, DIN6527L, HARMONY • Optimisée pour le Titane • Hélice variable pour supprimer les vibrations • Taillage conique pour conserver la rigidité • Revêtement AlNova pour une bonne résistance à l’oxidation et à la haute vitesse

Vc Page #: 494  d1 (e8)

0600 0800 1000 1200 1600 2000 2500

E465 B0210

VHM-ULTRA

AlNova

R40/42

Item #

5.7

7.6

9.5

11.5

15.5

104

19.5

125

E464 0600 E464 0800 E464 2000 E464 1200 E464 1600 E464 2000 E464 2500

E465 1200 E465 1600 E465 2000

ISO VDI 3323

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • •

E464 E465 S Titanium & Super Alloys H Hard Materials

Tech Info

Reamers

HSS Endmills

6.0 8.0 10.0 12.0 16.0 20.0 25.0

E464 B0210

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

DIN Taps

2º

Carbide Endmills

ISO Taps

Frese metallo duro, 5 Taglienti, R40/42Ti, DIN6527L, Harmony • Fresa a spigolo vivo per lavorazioni di finitura • Ottimizzata per una vita utensile maggiore su leghe di Titanio • Elica variabile per eliminare le vibrazioni • Web rastremato per aumetare rigidità • AlNova per un eccezionale resistenza all’ossidazione e alle alte temperature

Size Ref.

Carbide Drills

Contents

Back to index

• Optimal • Effective

423

Back to index

Carbide Drills HSS Drills

Fraise 5 dents carbure, R40°/42° Ti, Torique, DIN6527L, HARMONY • Optimisée pour le Titane • Hélice variable pour supprimer les vibrations, Torique • Taillage conique pour conserver la rigidité • Revêtement AlNova pour une bonne résistance à l’oxidation et à la haute vitesse

ISO Taps

Frese metallo duro, 5 Taglienti, R40/42Ti, Toriche, DIN6527L, Harmony • Fresa torica il cui raggio di testa viene interamente rettificato in un unica volta senza riprese • Ottimizzata per una vita utensile maggiore su leghe di Titanio • Elica variabile per eliminare le vibrazioni • Web rastremato per aumetare rigidità • AlNova per un eccezionale resistenza all’ossidazione e alle alte temperature

Tool Holding

2º

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 494  Size Ref.

d1 (e8)

Carbide Endmills HSS Endmills Reamers

0605 0610 0805 0810 1005 1010 1210 1225 1240 1610 1625 1630 1640 2010 2025 2030 2040 2050 2060 2510 2525 2530 2540 2550 2560

Tech Info

Item #

5.5

0.5

5.5

1.0

7.5

0.5

7.5

1.0

9.5

0.5

9.5

1.0

11.2

1.0

11.2

2.5

11.2

4.0

1.0

2.5

E466 0605 E466 0610 E466 0805 E466 0810 E466 1005 E466 1010 E466 1210 E466 1225 E466 1240 E466 1610 E466 1625

3.0

4.0

104

1.0

104

2.5

104

3.0

104

4.0

104

5.0

104

6.0

120

1.0

120

2.5

120

3.0

120

4.0

120

5.0

120

6.0

P 4

R40/42

rad

16.0

R40/42

12.0

AlNova

10.0

VHM-ULTRA

AlNova

ISO VDI 3323

VHM-ULTRA

8.0

25.0

E467 B0210

6.0

20.0

E466 B0210

M 8

E467 1210 E467 1225 E467 1240 E467 1610 E467 1625 E467 1630 E467 1640 E467 2010 E467 2025

E466 1640 E466 2010 E466 2025 E466 2030 E466 2040 E466 2050 E466 2060 E466 2510 E466 2525 E466 2530 E466 2540 E466 2550 E466 2560 N

E467 2040 E467 2050 E467 2060

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E466 E467 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

424

Fresas de MD, 5 Ranuras, R40/42 Ti, Tórica, DIN6527L, Harmony • Filo facetado para aplicaciones de acabado • Optimizado para una mayor vida útil de la herramienta en aleaciones de titanio • Diseño de hélice variable para suprimir vivraciones • Núcleo cónico para aumentar la rigidez • AlNova para una excelente resistencia a la oxidación y dureza en caliente

• Unique corner radius grind for added strength • Optimised for longer tool life in Titanium Alloys • Variable helix design to suppress vibration • AlNova for outstanding oxidation resistance and hot hardness

• • • • • • • • • • • •

Contents

Endmills Carbide, 5 Flute, R40/42Ti, Cnr Rad, DIN6527L, Harmony

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

Endmills Carbide, 6 Flute, R40/42Ti, DIN6527L, Harmony Endmills Carbide, 6 Flute, R40/42Ti, DIN6527L, Harmony • Filo facetado para aplicaciones de acabado • Optimizado para una mayor vida útil de la herramienta en aleaciones de titanio • Diseño de hélice variable para suprimir vivraciones • Núcleo cónico para aumentar la rigidez • AlNova para una excelente resistencia a la oxidación y dureza en caliente

HSS Drills

Fraise 6 dents carbure, R40°/42° Ti, DIN6527L, HARMONY • Optimisée pour le Titane • Hélice variable pour supprimer les vibrations • Taillage conique pour conserver la rigidité • Revêtement AlNova pour une bonne résistance à l’oxidation et à la haute vitesse

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 494  d1 (e8)

1200 1600 2000

E469 B0210

VHM-ULTRA

AlNova

R40/42

Item #

11.5

15.5

104

19.5

E468 1200 E468 1600 E468 2000

E469 1200 E469 1600 E469 2000

ISO VDI 3323

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

• • • • • • • • • • • •

E468 E469 S Titanium & Super Alloys H Hard Materials

Tech Info

Reamers

HSS Endmills

Carbide Endmills

12.0 16.0 20.0

E468 B0210

Tool Holding

2º

DIN Taps

ISO Taps

Frese metallo duro, 6 Taglienti, R40/42Ti, DIN6527L, Harmony • Fresa a spigolo vivo per lavorazioni di finitura • Ottimizzata per una vita utensile maggiore su leghe di Titanio • Elica variabile per eliminare le vibrazioni • Web rastremato per aumetare rigidità • AlNova per un eccezionale resistenza all’ossidazione e alle alte temperature

Size Ref.

Carbide Drills

Contents

Back to index

• Optimal • Effective

425

Back to index Contents

Endmills Carbide, 6 Flute, R40/42Ti, Cnr Rad, DIN6527L, Harmony

Carbide Drills

Fresas de MD, 6 Ranuras, R40/42Ti, Tórica, DIN6527L, Harmony • Rectificado único del radio de la esquina para mayor resistencia • Optimizado para una mayor vida útil de la herramienta en aleaciones de titanio • Diseño de hélice variable para suprimir vivraciones • AlNova para una excelente resistencia a la oxidación y dureza en caliente

HSS Drills

Fraise 6 dents carbure, R40°/42° Ti, Torique, DIN6527L, HARMONY • Optimisée pour le Titane • Hélice variable pour supprimer les vibrations, Torique • Revêtement AlNova pour une bonne résistance à l’oxidation et à la haute vitesse

ISO Taps

Frese metallo duro, 6 Taglienti, R40/42Ti, Toriche, DIN6527L, Harmony • Fresa torica il cui raggio di testa viene interamente rettificato in un unica volta senza riprese • Ottimizzata per una vita utensile maggiore su leghe di Titanio • Elica variabile per eliminare le vibrazioni • AlNova per un eccezionale resistenza all’ossidazione e alle alte temperature

Tool Holding

2º

DIN Taps

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 494  Size Ref.

d1 (e8)

Carbide Endmills HSS Endmills

1210 1225 1240 1610 1625 1630 1640 2010 2025 2030 2040 2050 2060

12.0

E471 B0210

VHM-ULTRA

AlNova

R40/42

rad

Item #

E470 1210 E470 1225 E470 1240 E470 1610 E470 1625 E470 1630 E470 1640 E470 2010 E470 2025 E470 2030 E470 2040 E470 2050 E470 2060

E471 1210 E471 1225 E471 1240 E471 1610 E471 1625 • E471 1640 E471 2010 E471 2025 • E471 2040 E471 2050 E471 2060

11.5

1.0

11.5

2.5

11.5

4.0

15.5

1.0

15.5

2.5

15.5

3.0

15.5

4.0

104

19.5

1.0

104

19.5

2.5

104

19.5

3.0

104

19.5

4.0

104

19.5

5.0

104

19.5

6.0

16.0

20.0

E470 B0210

Reamers 1

M 8

E470 E471 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

426

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • •

Tech Info

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 5 Flute, R40/42 Ti, Extra Long

HSS Drills

Fraise 5 dents carbure, R40°/42° Ti, longue HARMONY • Optimisée pour le Titane, en fraisage trocoïdale, dynamique, de poche et finition • Hélice variable pour supprimer les vibrations • Taillage conique pour conserver la rigidité • Revêtement AlNova pour une bonne résistance à l’oxidation et à la haute vitesse • Carbure VHM-ULTRA

Carbide Drills

Frese metallo duro, 5 Taglienti, R40/42 Ti, Extra Lunga • Design ottimizzato per lavorazioni con strategie di trocoidale e HSM su leghe di Titanio • Ideale per fresare tasche molto profonde con pareti tipicamente molto sottili • Elica variabile per eliminare le vibrazioni • AlNova per un eccezionale resistenza all’ossidazione e alle alte temperature

• Optimised design for trochoidal and HSM milling strategies in titanium alloys • For extra deep pocket milling in typically thin wall components • Variable helix design to suppress vibration • AlNova for outstanding oxidation resistance and hot hardness

ISO Taps

Fresas de MD, 5 Ranuras, R40/42 Ti, Extra Larga • Diseño optimizado para fresado trocoidal y HSM en aleaciones de titanio • Para fresado profundo en componentes de paredes delgadas • Diseño de hélice variable para suprimir vivraciones • AlNova para una excelente resistencia a la oxidación y dureza en caliente

2º

Vc Page #: 495  z

10 10 10 10 12 12 12 12 12 12 12 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20

9.5

2.5

9.5

11.5

1.5

11.5

2.5

11.5

105

15.5

105

15.5

105

15.5

1.5

105

15.5

105

15.5

2.5

105

15.5

105

15.5

140

19.5

140

19.5

140

19.5

1.5

140

19.5

140

19.5

2.5

140

19.5

140

19.5

140

19.5

140

19.5

ISO VDI 3323

E476

P 7

rad

E476 1000 E476 1020 E476 1025 E476 1040 E476 1200 E476 1210 E476 1215 E476 1220 E476 1225 E476 1230 E476 1240 E476 1600 E476 1610 E476 1615 E476 1620 E476 1625 E476 1630 E476 1640 E476 2000 E476 2010 E476 2015 E476 2020 E476 2025 E476 2030 E476 2040 E476 2050 E476 2060 N

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

DIN Taps

Carbide Endmills

R40/42

HSS Endmills

AlNova

Ti-3XL

Reamers

VHM-ULTRA

Tech Info

B0210

• • • • • •

1000 1020 1025 1040 1200 1210 1215 1220 1225 1230 1240 1600 1610 1615 1620 1625 1630 1640 2000 2010 2015 2020 2025 2030 2040 2050 2060

d1 (e8)

SUTTON STD - 3XL

•

Size Ref.

E476

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Tool Holding

427

Back to index Contents

Endmills Carbide, 5 Flute, R40/42 Ti, Extra Long

Carbide Drills

HSS Drills

ISO Taps

2º

Tool Holding Vc Page #: 495 

Carbide Endmills HSS Endmills Reamers

10 10 10 10 12 12 12 12 12 12 12 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20

9.5

110

110 110

Tech Info

E477

VHM-ULTRA AlNova

Ti-4XL R40/42 HA h6

rad

Item #

9.5

2.5

9.5

11.5

1.5

11.5

110

11.5

2.5

110

11.5

110

11.5

130

15.5

130

15.5

130

15.5

1.5

130

15.5

130

15.5

2.5

130

15.5

130

15.5

160

100

19.5

160

100

19.5

160

100

19.5

1.5

160

100

19.5

160

100

19.5

2.5

160

100

19.5

160

100

19.5

160

100

19.5

160

100

19.5

E477 1000 E477 1020 E477 1025 E477 1040 E477 1200 E477 1210 E477 1215 E477 1220 E477 1225 E477 1230 E477 1240 E477 1600 E477 1610 E477 1615 E477 1620 E477 1625 E477 1630 E477 1640 E477 2000 E477 2010 E477 2015 E477 2020 E477 2025 E477 2030 E477 2040 E477 2050 E477 2060

ISO VDI 3323

B0210

P 7

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • •

DIN Taps

428

1000 1020 1025 1040 1200 1210 1215 1220 1225 1230 1240 1600 1610 1615 1620 1625 1630 1640 2000 2010 2015 2020 2025 2030 2040 2050 2060

d1 (e8)

SUTTON STD - 4XL

•

Size Ref.

E477

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

• Optimal • Effective

Endmills Carbide, 5 Flute, R40/42 Ni, DIN6527L, Harmony

12º

HSS Drills ISO Taps

Frese metallo duro, 5 Taglienti, R40/42 Ni, Toriche, DIN6527L, Harmony • Fresa torica il cui raggio di testa viene interamente rettificato in un unica volta senza riprese • Ottimizzata per una vita utensile maggiore su leghe di inconel, acciaio inossidabile • Elica variabile per eliminare le vibrazioni • Web rastremato per aumetare rigidità • Xceed per un eccezionale resistenza all’ossidazione e alle alte temperature

45º Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 500  Size Ref.

d1 (e8)

0600 0800 1000 1200 1600 2000

E473 B0210

VHM-ULTRA

Xceed

R40/42

rad

Item #

E472 0600 E472 0800 E472 1000 E472 1200 E472 1600 E472 2000

E473 0600 E473 0800 E473 1000 E473 1200 E473 1600 E473 2000

chf

5.7

0.20

7.6

0.20

9.5

0.25

11.5

0.25

15.5

0.35

104

19.5

0.35

P 7

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

•• •• •• •• •• •• •• •• •• •• ••

E472 E473

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•• •• •• •• ••

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Carbide Endmills

6.0 8.0 10.0 12.0 16.0 20.0

E472 B0210

Tool Holding

Fraise 5 dents carbure, R40°/42° Ni, DIN6527L, HARMONY, Torique • Optimisée pour les bases Nickel, Duplex et Super-Duplex • Hélice variable pour supprimer les vibrations • Convient pour les applications de contournage, rainurage et trocoidale • Revêtement Xceed pour une bonne résistance à l’oxidation et à les hautes températures

Fresas de MD, 5 Ranuras, R40/42 Ni, DIN6527L, Harmony • Filo facetado para aplicaciones de acabado • Optimizado para una mayor vida útil de la herramienta en aleaciones de inconel, acero inoxidable • Diseño de hélice variable para suprimir vivraciones • Núcleo cónico para aumentar la rigidez • Xceed para una excelente resistencia a la oxidación y dureza en caliente

DIN Taps

Carbide Drills

Contents

Back to index

429

Back to index Contents

Endmills Carbide, 5 Flute, R40/42 Ni, Cnr Rad, DIN6527L, Harmony

Carbide Drills

HSS Drills

ISO Taps

12º

Tool Holding

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 500  Size Ref.

DIN Taps

d1 (e8)

Carbide Endmills HSS Endmills

0605 0610 0805 0810 1005 1010 1210 1215 1225 1240 1610 1615 1625 1640 2010 2015 2025 2040

E475 B0210

VHM-ULTRA

Xceed

R40/42

chf

rad

Item #

5.7

0.5

5.7

1.0

7.6

0.5

7.6

1.0

9.5

0.5

9.5

1.0

11.5

1.0

11.5

1.5

11.5

2.5

11.5

4.0

15.5

1.0

15.5

1.5

15.5

2.5

15.5

4.0

104

19.5

1.0

104

19.5

1.5

104

19.5

2.5

104

19.5

4.0

E474 0605 E474 0610 E474 0805 E474 0810 E474 1005 E474 1010 E474 1210 E474 1215 E474 1225 E474 1240 E474 1610 E474 1615 E474 1625 E474 1640 E474 2010 E474 2015 E474 2025 E474 2040

E475 0605 E475 0610 E475 0805 E475 0810 E475 1005 E475 1010 E475 1210 E475 1215 E475 1225 E475 1240 E475 1610 E475 1615 E475 1625 E475 1640 E475 2010 E475 2015 E475 2025 E475 2040

6.0 8.0

10.0 12.0

16.0

20.0

E474 B0210

Reamers 2

P 7

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•• •• •• •• ••

E474 E475

•• •• •• •• •• •• •• •• •• •• ••

Tech Info

430

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills Carbide, 7 Flute, R40/42 Ni, Extra Long

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance z

10 10 10 10 12 12 12 12 12 12 12 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20

2.5

11.5

1.5

11.5

2.5

11.5

105

15.5

105

15.5

105

15.5

1.5

105

15.5

105

15.5

2.5

105

15.5

105

15.5

140

19.5

140

19.5

140

19.5

1.5

140

19.5

140

19.5

2.5

140

19.5

140

19.5

140

19.5

ISO

E486

P 7

rad

E486 1000 E486 1020 E486 1025 E486 1040 E486 1200 E486 1210 E486 1215 E486 1220 E486 1225 E486 1230 E486 1240 E486 1600 E486 1610 E486 1615 E486 1620 E486 1625 E486 1630 E486 1640 E486 2000 E486 2010 E486 2015 E486 2020 E486 2025 E486 2030 E486 2040 E486 2050 N

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • •

VDI 3323

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

DIN Taps

Carbide Endmills

R40/42

HSS Endmills

Xceed

Ni-3XL

Reamers

VHM-ULTRA

Tech Info

E486 B0210

• • • • •

1000 1020 1025 1040 1200 1210 1215 1220 1225 1230 1240 1600 1610 1615 1620 1625 1630 1640 2000 2010 2015 2020 2025 2030 2040 2050

d1 (e8)

SUTTON STD - 3XL

HSS Drills

12º

Vc Page #: 501  Size Ref.

ISO Taps

Fresas de MD, 7 Ranuras, R40/42 Ni, DIN6527L, Harmony • Filo facetado para aplicaciones de acabado • Optimizado para una mayor vida útil de la herramienta en aleaciones de inconel, acero inoxidable • Diseño de hélice variable para suprimir vivraciones • Núcleo cónico para aumentar la rigidez • Xceed para una excelente resistencia a la oxidación y dureza en caliente

Tool Holding

Fraise 7 dents carbure, R40°/42° Ni, DIN6527L, HARMONY, Torique • Optimisée pour les bases Nickel, Duplex et Super-Duplex • Hélice variable pour supprimer les vibrations • Convient pour les applications de contournage, rainurage et trocoidale • Revêtement Xceed pour une bonne résistance à l’oxidation et à les hautes températures

Carbide Drills

Frese metallo duro, 7 Taglienti, R40/42 Ni, Toriche, DIN6527L, Harmony • Fresa torica il cui raggio di testa viene interamente rettificato in un unica volta senza riprese • Ottimizzata per una vita utensile maggiore su leghe di inconel, acciaio inossidabile • Elica variabile per eliminare le vibrazioni • Web rastremato per aumetare rigidità • Xceed per un eccezionale resistenza all’ossidazione e alle alte temperature

431

Back to index

Carbide Drills HSS Drills

Frese metallo duro, 9 Taglienti, R40/42 Ni, Toriche, DIN6527L, Harmony • Fresa torica il cui raggio di testa viene interamente rettificato in un unica volta senza riprese • Ottimizzata per una vita utensile maggiore su leghe di inconel, acciaio inossidabile • Elica variabile per eliminare le vibrazioni • Web rastremato per aumetare rigidità • Xceed per un eccezionale resistenza all’ossidazione e alle alte temperature

• Excellent solution for stainless steels and super alloy • Optimised geometry with variable helix design • Suitable for slotting, side cutting and finishing • XCeed for outstanding oxidation resistance and hot hardness Fraise 9 dents carbure, R40°/42° Ni, DIN6527L, HARMONY, Torique • Optimisée pour les bases Nickel, Duplex et Super-Duplex • Hélice variable pour supprimer les vibrations • Convient pour les applications de contournage, rainurage et trocoidale • Revêtement Xceed pour une bonne résistance à l’oxidation et à les hautes températures

ISO Taps

Fresas de MD, 9 Ranuras, R40/42 Ni, DIN6527L, Harmony • Filo facetado para aplicaciones de acabado • Optimizado para una mayor vida útil de la herramienta en aleaciones de inconel, acero inoxidable • Diseño de hélice variable para suprimir vivraciones • Núcleo cónico para aumentar la rigidez • Xceed para una excelente resistencia a la oxidación y dureza en caliente

12º

Tool Holding

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Vc Page #: 501  Size Ref.

Carbide Endmills HSS Endmills Reamers

10 10 10 10 12 12 12 12 12 12 12 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20

9.5

110

110 110

Tech Info

E487

Xceed

Ni-4XL R40/42 HA h6

Item #

9.5

2.5

9.5

11.5

1.5

11.5

110

11.5

2.5

110

11.5

110

11.5

130

15.5

130

15.5

130

15.5

1.5

130

15.5

130

15.5

2.5

130

15.5

130

15.5

160

100

19.5

160

100

19.5

160

100

19.5

1.5

160

100

19.5

160

100

19.5

2.5

160

100

19.5

160

100

19.5

160

100

19.5

E487 1000 E487 1020 E487 1025 E487 1040 E487 1200 E487 1210 E487 1215 E487 1220 E487 1225 E487 1230 E487 1240 E487 1600 E487 1610 E487 1615 E487 1620 E487 1625 E487 1630 E487 1640 E487 2000 E487 2010 E487 2015 E487 2020 E487 2025 E487 2030 E487 2040 E487 2050

ISO VDI 3323

VHM-ULTRA

rad

SUTTON STD - 4XL

P 7

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • •

DIN Taps

432

1000 1020 1025 1040 1200 1210 1215 1220 1225 1230 1240 1600 1610 1615 1620 1625 1630 1640 2000 2010 2015 2020 2025 2030 2040 2050

d1 (e8)

E487 B0210

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • •

Contents

Endmills Carbide, 9 Flute, R40/42 Ni, Extra Long

• Optimal • Effective

Contents

Back to index

Carbide Drills

Endmills Carbide, Ballnose, 4 Flute, R30 TiNiVA, Long Reach • VHM-ULTRA grade of carbide for high performance • For profile & contour milling in long reach applications • Suitable for materials up to 1600 N/mm² • AlCrN for longer tool life

HSS Drills

Fraise 4 dents carbure, R30° UNI, Longue • Pour le fraisage de formes et de poches profondes • Convient au matériaux jusqu’à 1600 N/mm² • AlCrN et VHM-ULTRA pour une meilleure durée de vie Frese metallo duro, Sferiche, 4 Taglienti, R30 UNI, Lunga Portata • VHM-ULTRA, grado di metallo duro per alte prestazione • Ideale per lavorazioni di contornatura e profilatura • Adatta per materiali fino a 1600 N/mm² • AlCrN per Ottimizzare vita utensile

6º

Vc Page #: 495 

0500 0600 0800 1000 1200 1600

2.0 3.0 4.0

7.0

1.9

3°

30°

9.5

24.6

2.8

3°

30°

12.0

25.3

3.8

3°

30°

5.0

14.5

4.8

3°

6.0 8.0 10.0 12.0 16.0

17.0

5.7

22.0

7.6

100

27.0

9.5

120

32.0

11.5

140

42.0

15.5

TYPE 2 TYPE 3

Type 1: 2.0 - 4.0mm

Xceed

TiNiVA

Tool Holding

VHM-ULTRA

R30 HA h5

Item #

Angle 1 Angle 2

E481 0200 E481 0300 E481 0400

DIN Taps

0200 0300 0400

d1 (e8)

TYPE 1

B0210

E481 0500 E481 0600 E481 0800 E481 1000 E481 1200 E481 1600 Type 2: 5.0mm

30°

3°

HSS Endmills

Size Ref.

E481

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 6535) Shank Tolerance

Carbide Endmills

ISO Taps

P 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• • • • • • • • • • •

• • •

E481

• • • • •

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

Type 3: 6.0 - 16.0mm

433

5-Axis Taper Barrel

Lens

Oval

Ball Nose Endmill

5 Axis - Oval Endmill

Optimise your 5-Axis Machining • Up to 90% cycle time savings over Ball Nose Endmills • Ideal for finishing of 3D surfaces and Hybrid CNC-3D printing application • Less than 10μm profile deviation for high workpiece accuracy • Customised solutions available

HSS ENDMILLS

• Solutions for slotting, finishing, roughing and profiling • 8% Co & PM grades of HSS • Short and long series • General purpose and application specific geometries

Contents

Endmills HSS Finder Page

438

439

440

441

Catalogue Code Type of Cut: Slotting Finishing Universal Roughing Profiling Material Surface Finish Sutton Designation Standard Shank Tolerance

E179

E180

E183

E184

E191

E192

E201

E202

• •

HSS Co.8 Brt

HSS Co.8 TiAlN

• • • • • • • •

• • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• • •

Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

Sutton N VA GG AI W Ti Ni H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

HSS Drills ISO Taps ISO

VDI^ 3323

Material

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills Reamers Tech Info

436

Condition

~ 0.15 %C

125

•

Brt

•

HSS Co.8 TiAlN N DIN 327 h6

Brt

•

HSS Co.8 TiAlN N DIN 844L h6

HSS Co.8 TiAlN N DIN 844K h6

Brt

N DIN 844K h6

N/mm2 440 640 840 910 1010 610 930 1010 1180 680 1100

• • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

680 810 610

•

840 840 610 880 570 840 460 780 210 360 270 320 460 390 320 360

•

• • • • • • • • • • • • • • • • •

•

• • • • •

• • • • • •

•

• • • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

• • •

• • • • • • • • • •

950 840 1180 1080

1350

• • •

• • • • • • • • • • •

680

•

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

• Optimal • Effective

•

Contents 442

443

444

445

446

447

E205

E206

E146

E147

E151

E123

E124

E251

E255

E252

• •

•

SPM AlCrN VA DIN 844K h6

SPM AlCrN VA DIN 844L h6

SPM

TiAlN

W DIN 844L h6

VDI^

• • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• • •

•

• • • • • • • •

• • •

• • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

•

• • • • • • • •

•

• • • • •

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • •

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO Taps

Brt

ISO

Tool Holding

NR DIN 844L h6

SPM TiAlN UNI DIN 844K h6

DIN Taps

TiCN

Carbide Endmills

HSS Co.8

HSS Endmills

Brt

Slotting Finishing Universal Roughing Profiling

Reamers

HSS Co.8 TiAlN N DIN 844L h6

• • •

Tech Info

Brt

• • •

HSS Drills

Carbide Drills

442

437

Back to index Contents

Slot Drills 2 Flute, R30 N, Stub

Carbide Drills

Fresas, 2 ranuras, R30 N, Corta • Para fresado de precisión de ranuras y cavidades • Adecuado para materiales hasta 1000 N/mm² • Para aceros blandos y materiales no ferrosos. • TiAlN para una mayor vida útil de la herramienta

• For precision milling of slots & cavities • Suitable for materials up to 1000 N/mm² • For soft steels & non-ferrous material • TiAlN for longer tool life

HSS Drills

Fraises 2 dents, R30° • Pour la réalisation de rainures et de poches • Convient aux matériaux jusqu’à 1000 N/mm² • Pour aciers doux et non-ferreux • Revêtement TiAlN pour une meilleure durée de vie Frese Metallo Duro 2 Taglienti, R30 N, Corta • Fresatura di cave ad alta precisione • Ideale per materiali fino a 1000 N/mm² • Geometria ottimizzata per materiali morbidi & non ferrosi • TiAlN per Ottimizzare vita utensile

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Vc Page #: 502  l2

Carbide Endmills HSS Endmills Reamers

47 47 48 49 49 50 51 51 52 52 52 60 60 60 61 61 61 61 63 70 73 73 73 73 79 79 88 88 88 102 102 102 112 130

3 3 4 5 5 6 7 7 8 8 8 10 10 10 11 11 11 11 13 13 16 16 16 16 19 19 22 22 22 26 26 26 32 38

6 6 6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 12 12 12 12 12 16 16 20 20 20 25 25 25 32 32

Tech Info

HSS Co.8

Brt

TiAlN

R30

Item #

E179 0100 E179 0150 E179 0200 E179 0250 E179 0300 E179 0350 E179 0400 E179 0450 E179 0500 E179 0550 E179 0600 E179 0650 E179 0700 E179 0750 E179 0800 E179 0850 E179 0900 E179 0950 E179 1000 E179 1100 E179 1200 E179 1300 E179 1400 E179 1500 E179 1600 E179 1800 E179 2000 E179 2200

E181 0100 E181 0150 E181 0200 E181 0250 E181 0300 E181 0350 E181 0400 E181 0450 E181 0500 E181 0550 E181 0600 E181 0650 E181 0700 E181 0750 E181 0800 E181 0850 E181 0900 E181 0950 E181 1000 E181 1100 E181 1200 E181 1300 E181 1400 E181 1500 E181 1600 E181 1800 E181 2000 E181 2200 E181 2300 E181 2400 E181 2500 • • •

E180 0100 E180 0150 E180 0200 E180 0250 E180 0300 E180 0350 E180 0400 E180 0450 E180 0500 E180 0550 E180 0600 E180 0650 E180 0700 E180 0750 E180 0800 E180 0850 E180 0900 E180 0950 E180 1000 E180 1100 E180 1200 E180 1300 E180 1400 E180 1500 E180 1600 E180 1800 E180 2000

E182 0100 E182 0150 E182 0200 E182 0250 E182 0300 E182 0350 E182 0400 E182 0450 E182 0500 E182 0550 E182 0600 E182 0650 E182 0700 E182 0750 E182 0800 E182 0850 E182 0900 E182 0950 E182 1000 E182 1100 E182 1200 E182 1300 E182 1400 E182 1500 E182 1600 E182 1800 E182 2000 E182 2200 E182 2300 E182 2400 E182 2500 • • •

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E179 / E181 E180 / E182

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

438

HSS Co.8

Brt

M 8

HSS Co.8

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

ISO VDI 3323

E182 B0608

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 11.0 12.0 13.0 14.0 15.0 16.0 18.0 20.0 22.0 23.0 24.0 25.0 30.0 32.0 40.0

E180 B0608

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

DIN Taps

d1 (e8)

0100 0150 0200 0250 0300 0350 0400 0450 0500 0550 0600 0650 0700 0750 0800 0850 0900 0950 1000 1100 1200 1300 1400 1500 1600 1800 2000 2200 2300 2400 2500 3000 3200 4000

E181 B0606

• •

Size Ref.

E179 B0606

• Optimal • Effective

Contents

Back to index

Slot Drills 2 Flute, R30 N, Long

Carbide Drills

Fresas, 2 ranuras, R30 N, Larga • Para fresado de precisión de ranuras y cavidades • Adecuado para materiales hasta 1000 N/mm² • Para aceros blandos y materiales no ferrosos. • TiAlN para una mayor vida útil de la herramienta

• For long-reach slotting applications • Suitable for materials up to 1000 N/mm² • For soft steels & non-ferrous material • TiAlN for longer tool life

HSS Drills

Fraises 2 dents, R30°, Longue • Pour la réalisation de rainures et de poches • Convient aux matériaux jusqu’à 1000 N/mm² • Pour aciers doux et non-ferreux • Revêtement TiAlN pour une meilleure durée de vie

ISO Taps

Frese Metallo Duro 2 Taglienti, R30 N, Lunga • Fresatura di cave molto profonde • Ideale per materiali fino a 1000 N/mm² • Geometria ottimizzata per materiali morbidi & non ferrosi • TiAlN per Ottimizzare vita utensile

HSS Co.8

TiAlN

R30

Item #

10 12 12 15 19 19 24 24 24 30 30 30 38 38 38 38 45 45 53 53 53 53 63 63 75 75 75 90 90 90 106 125

6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 12 12 12 12 12 16 16 20 20 20 25 25 25 32 40

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

E183 0200 E183 0250 E183 0300 E183 0350 E183 0400 E183 0450 E183 0500 E183 0550 E183 0600 E183 0650 E183 0700 E183 0750 E183 0800 E183 0850 E183 0900 E183 0950 E183 1000 E183 1100 E183 1200 E183 1300 E183 1400 E183 1500 E183 1600 E183 1800 E183 2000

E185 0200 E185 0250 E185 0300 E185 0350 E185 0400 E185 0450 E185 0500 E185 0550 E185 0600 E185 0650 E185 0700 E185 0750 E185 0800 E185 0850 E185 0900 E185 0950 E185 1000 E185 1100 E185 1200 E185 1300 E185 1400 E185 1500 E185 1600 E185 1800 E185 2000 E185 2200 E185 2300 E185 2400 E185 2500 • • •

E184 0200 E184 0250 E184 0300 E184 0350 E184 0400 E184 0450 E184 0500 E184 0550 E184 0600 E184 0650 E184 0700 E184 0750 E184 0800 E184 0850 E184 0900 E184 0950 E184 1000 E184 1100 E184 1200 E184 1300 E184 1400 E184 1500 E184 1600 E184 1800 E184 2000

E186 0200 E186 0250 E186 0300 E186 0350 E186 0400 E186 0450 E186 0500 E186 0550 E186 0600 E186 0650 E186 0700 E186 0750 E186 0800 E186 0850 E186 0900 E186 0950 E186 1000 E186 1100 E186 1200 E186 1300 E186 1400 E186 1500 E186 1600 E186 1800 E186 2000 E186 2200 E186 2300 E186 2400 E186 2500 • • •

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • • • • • • • • • • • • • • •

E183 / E185 E184 / E186

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

DIN Taps

HSS Co.8

Brt

Carbide Endmills

HSS Co.8

Brt

HSS Endmills

HSS Co.8

P 1

E186 B0608

54 56 56 59 63 63 68 68 68 80 80 80 88 88 88 88 95 102 110 110 110 110 123 123 141 141 141 166 166 166 186 217

ISO VDI 3323

E184 B0608

• •

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 11.0 12.0 13.0 14.0 15.0 16.0 18.0 20.0 22.0 23.0 24.0 25.0 30.0 32.0 40.0

E185 B0606

• • • • • • • • • • •

d1 (e8)

0200 0250 0300 0350 0400 0450 0500 0550 0600 0650 0700 0750 0800 0850 0900 0950 1000 1100 1200 1300 1400 1500 1600 1800 2000 2200 2300 2400 2500 3000 3200 4000

• •

Size Ref.

E183 B0606

Reamers

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Tool Holding

Tech Info

• Optimal • Effective

439

Back to index

Carbide Drills

• For precision milling applications • Suitable for materials up to 1000 N/mm² • TiCN for longer tool life

HSS Drills

Frese Metallo Duro 4 Taglienti, R30 N, Media • Fresatura di cave ad alta precisione • Ideale per materiali fino a 1000 N/mm² • TiCN per Ottimizzare vita utensile

Fraises 4 dents, R30° • Pour les opérations de finitions et de précision • Convient aux matériaux jusqu’à 1000 N/mm² • TiCN pour une meilleure durée de vie

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Vc Page #: 502  Size Ref.

Carbide Endmills HSS Endmills Reamers

2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 21.0 22.0 25.0 28.0 30.0 32.0 35.0 36.0 38.0 40.0 42.0 45.0 50.0

Tech Info

HSS Co.8

Brt

TiAlN

R30

Item #

7 8 8 11 13 13 16 19 19 22 22 26 26 26 26 32 32 32 38 38 45 45 45 45 53 53 53 63 63 63 63 75

6 6 6 6 6 6 10 10 10 10 12 12 12 12 12 16 16 16 20 20 20 25 25 25 32 32 32 40 40 40 40 40*

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6

E191 0200 E191 0250 E191 0300 E191 0400 E191 0500 E191 0600 E191 0700 E191 0800 E191 0900 E191 1000 E191 1100 E191 1200 E191 1300 E191 1400 E191 1500 E191 1600 E191 1700 E191 1800 E191 2000 • •

E193 0200 E193 0250 E193 0300 E193 0400 E193 0500 E193 0600 E193 0700 E193 0800 E193 0900 E193 1000 E193 1100 E193 1200 E193 1300 E193 1400 E193 1500 E193 1600 E193 1700 E193 1800 E193 2000 E193 2100 E193 2200 E193 2500 E193 2800 E193 3000 E193 3200 E193 3500 E193 3600 E193 3800 E193 4000 E193 4200 E193 4500 E193 5000

E192 0200 E192 0250 E192 0300 E192 0400 E192 0500 E192 0600 E192 0700 E192 0800 E192 0900 E192 1000 E192 1100 E192 1200 E192 1300 E192 1400 E192 1500 E192 1600 E192 1700 E192 1800 E192 2000 E192 2100 E192 2200

E194 0200 E194 0250 E194 0300 E194 0400 E194 0500 E194 0600 E194 0700 E194 0800 E194 0900 E194 1000 E194 1100 E194 1200 E194 1300 E194 1400 E194 1500 E194 1600 E194 1700 E194 1800 E194 2000 E194 2100 E194 2200 E194 2500 E194 2800 E194 3000 E194 3200 E194 3500 E194 3600 E194 3800 E194 4000 E194 4200 E194 4500 E194 5000

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E191 / E193 E192 / E194

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

440

E194 B0608

P 1

E192 B0608

51 52 52 55 57 57 66 69 69 72 79 83 83 83 83 92 92 92 104 104 121 121 121 133 133 133 133 155 155 155 155 177

ISO VDI 3323

E193 B0606

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

DIN Taps

d1 (k10)

0200 0250 0300 0400 0500 0600 0700 0800 0900 1000 1100 1200 1300 1400 1500 1600 1700 1800 2000 2100 2200 2500 2800 3000 3200 3500 3600 3800 4000 4200 4500 5000

E191 B0606

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time. * Shank size not to DIN

•

ISO Taps

Fresas, 4 ranuras, R30 N, Regular • Para aplicaciones de fresado • Adecuado para materiales hasta 1000 N/mm² • TiCN para una mayor vida útil de la herramienta

• •

Contents

Endmills 4 Flute, R30 N, Regular

• Optimal • Effective

Contents

Back to index

Roughers NF (semi roughing), R30 N, Regular

HSS Drills

Fraises de semi-ébauche profil plat NF, R30° • Pour les opérations de semi-ébauches • Géométie NF permettant une surface finie propre • Convient aux matériaux jusqu’à 1100N/mm² • Revêtement TiAlN pour une meilleure durée de vie

Carbide Drills

Fresas Desbaste NF (semi), R30 N, Regular • Para aplicaciones de desbaste • La geometría NF permite cortes pesados, con un buen acabado superficial • Adecuado para materiales hasta 1100 N/mm² • TiAlN para una mayor vida útil de la herramienta

• For roughing applications • NF geometry allows for heavy cuts, with a good surface finish • Suitable for materials up to 1100 N/mm² • TiAlN for longer tool life

ISO Taps

Rompi Truciolo NF (Semi Sgrossatura), R30 N, Media • Fresa ideale per lavorazioni di sgrossatura • Geometria NF permette lavorazioni gravose mantenendo una buona superficie • Ideale per materiali fino a 1100 N/mm² • TiAlN per Ottimizzare vita utensile

Vc Page #: 503  Size Ref.

d1 (js14)

0600 0800 1000 1200 1400 1600 1800 2000 2200 2500 3000 3200 3600 4000

E202 B0404

HSS Co.8

Brt

TiAlN

R30 NF

Item #

104

121

133

155

E201 0600 E201 0800 E201 1000 E201 1200 E201 1400 E201 1600 E201 1800 E201 2000 E201 2200 E201 2500 E201 3000 E201 3200 E201 3600 E201 4000

E202 0600 E202 0800 E202 1000 E202 1200 E202 1400 E202 1600 E202 1800 E202 2000 E202 2200 E202 2500 E202 3000 E202 3200 E202 3600 E202 4000

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E201 E202

• • • • • •

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 25.0 30.0 32.0 36.0 40.0

E201 B0402

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Tool Holding

45º

Carbide Endmills

• Optimal • Effective

441

Back to index Contents

Roughers NF (semi roughing), R30 N, Long

Carbide Drills

Fresas Desbaste NF (semi), R30 N, Larga • Para aplicaciones de desbaste • La geometría NF permite cortes pesados, con un buen acabado superficial • Adecuado para materiales hasta 1100 N/mm² • TiAlN para una mayor vida útil de la herramienta

• For roughing applications • NF geometry allows for heavy cuts, with a good surface finish • Suitable for materials up to 1100 N/mm² • TiAlN for longer tool life

HSS Drills

Fraises de semi-ébauche profil plat NF, R30°, Longue • Pour les opérations de semi-ébauches • Géométie NF permettant une surface finie propre • Convient aux matériaux jusqu’à 1100N/mm² • Revêtement TiAlN pour une meilleure durée de vie Rompi Truciolo NF (Semi Sgrossatura), R30 N, Lunga • Fresa ideale per lavorazioni di sgrossatura • Geometria NF permette lavorazioni gravose mantenendo una buona superficie • Ideale per materiali fino a 1100 N/mm² • TiAlN per Ottimizzare vita utensile

ISO Taps NF

45º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Vc Page #: 503  Size Ref.

DIN Taps

d1 (js14)

Carbide Endmills

0600 0800 1000 1200 1400 1600 1800 2000 2200 2500 3000 3200 3600 4000

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 25.0 30.0 32.0 36.0 40.0

E205

E206

B0402

B0404

HSS Co.8

Brt

TiAlN

R30 NF

Item #

• • E205 1000 E205 1200 E205 1400 E205 1600 E205 1800 E205 2000 E205 2200 E205 2500 E205 3000 E205 3200 E205 3600 E205 4000

• • E206 1000 E206 1200 E206 1400 E206 1600 E206 1800 E206 2000 E206 2200 E206 2500 E206 3000 E206 3200 E206 3600 E206 4000

110

123

141

166

186

106

186

106

217

125

HSS Endmills Reamers 4

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

442

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

•

• • • • • • • • • • •

• • • • •

E205 E206

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Roughers NR (normal), R30 NR, Long

Carbide Drills

Fresas Desbaste NR (normal), R30 N, Larga • Para aplicaciones de desbaste • La geometría NR permite cortes pesados • Adecuado para materiales hasta 1000 N/mm² • TiCN para una mayor vida útil de la herramienta

• For roughing applications • NR geometry allows for heavy cuts • Suitable for materials up to 1000 N/mm² • TiCN for longer tool life

HSS Drills

Fraises d’ébauche profil NR, R30°, Longue • Pour les opérations de d’ébauches • Géométie NR pour les coupes difficiles • Convient aux matériaux jusqu’à 1100N/mm² • Revêtement TiCN pour une meilleure durée de vie

ISO Taps

Rompi Truciolo NR (Normale), R30 NR, Lunga • Fresa ideale per lavorazioni di sgrossatura • Geometria NR permette lavorazioni gravose • Ideale per materiali fino a 1000 N/mm² • TiCN per Ottimizzare vita utensile

Vc Page #: 503  Size Ref.

d1 (js14)

0600 0800 1000 1200 1600 1800 2000 2200 2500 3000

E148*

E147

B0402

B0404

HSS Co.8

E149* B0404

HSS Co.8

HSS Co.8 TiCN

Brt

TiCN

R30 NR (coarse pitch)

Item #

110

123

E148 0600 E148 0800 E148 1000 E148 1200 E148 1600

141

166

E147 0600 E147 0800 E147 1000 E147 1200 E147 1600 E147 1800 E147 2000 E147 2200 E147 2500 E147 3000

E149 0600 E149 0800 E149 1000 E149 1200 E149 1600

123

E146 0600 E146 0800 E146 1000 E146 1200 E146 1600 E146 1800 E146 2000 E146 2200 E146 2500 E146 3000

E148 2000 E148 2500 E148 3000

E149 2000 E149 2500 E149 3000

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

E146 / E148 E147 / E149

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals * Not available once current stock is depleted.

S Titanium & Super Alloys H Hard Materials

• •

• • • • • • • •

•

ISO VDI 3323

Tech Info

Reamers

HSS Endmills

6 8 10 12 16 18 20 22 25 30

E146 B0402

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Tool Holding

45º

Carbide Endmills

• Optimal • Effective

443

Back to index Contents

Roughers HRS (fine), R45 UNI, Regular

Carbide Drills

Fresas Desbaste HRS (fino), R45 UNI, Regular • SPM ofrece un rendimiento superior • Para aplicaciones de desbaste • La geometría HRS permite cortes pesados, en materiales de viruta corta y larga • TiAlN para una mayor vida útil de la herramienta

• SPM offers superior performance • For roughing applications • HRS geometry allows for heavy cuts in short & long chipping materials • TiAlN for longer tool life

HSS Drills

Fraises d’ébauche profil fin HRS , R45°, UNI • SPM pour une meilleure performance • Pour les opérations d’ébauches • Géométrie HRS pour les matériaux tendres à copeaux longs • Revêtement TiAlN pour une meilleure durée de vie

ISO Taps

Rompi Truciolo HRS (Fine), R45 UNI, Media • SPM offre una prestazione superiore • Fresa ideale per lavorazioni di sgrossatura • Geometria HRS permette lavorazioni gravose su materiale da truciolo corto & lungo • TiAlN per Ottimizzare vita utensile

HRS

45º

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Vc Page #: 503  Size Ref.

DIN Taps

d1 (js14)

Carbide Endmills

0400 0500 0600 0700 0800 0900 1000 1200 1400 1600 1800 2000 2500

4.0 5.0 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0

E151 B0408 SPM TiAlN

UNI R45 HRS B h6

Item #

104

121

E151 0400 E151 0500 E151 0600 E151 0700 E151 0800 E151 0900 E151 1000 E151 1200 E151 1400 E151 1600 E151 1800 E151 2000 E151 2500

HSS Endmills Reamers 3

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• •

E151

• • • • • • • • • • • • • • • • • • • • • •

Tech Info

444

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Endmills 3 Flute, R40 W, Long

HSS Drills

Fraises 3 dents, R40°, W, Long • SPM pour une meilleure performance • Pour la réalisation de rainures & finition avec le même outil • Géométrie optimisée pour les matériaux tendres • Brt pour les non-ferreux • Revêtement TiAlN pour une meilleure durée de vie

Fresas, 3 ranuras, R40 W, Larga • SPM ofrece un rendimiento superior • Uso universal para aplicaciones de ranurado y acabado con una herramienta • Geometría optimizada para materiales blandos • Brt para materiales no ferrosos • TiAlN para una mayor vida útil de la herramienta

Carbide Drills

• SPM offers superior performance • Universal use for slotting & finishing applications, with one tool • Optimised geometry for soft materials • Brt for non ferrous materials • TiAlN for longer tool life

d1 (e8)

0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

B0612

SPM

Brt

TiAlN

R40

Item #

110

123

141

E123 0300 E123 0400 E123 0500 E123 0600 E123 0800 E123 1000 E123 1200 E123 1400 E123 1600 E123 1800 E123 2000

E124 0300 E124 0400 E124 0500 E124 0600 E124 0800 E124 1000 E124 1200 E124 1400 E124 1600 E124 1800 E124 2000

P 1

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

E123 E124 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals * Not available once current stock is depleted.

• • • • • • • • • • • • • • •

ISO VDI 3323

S Titanium & Super Alloys H Hard Materials

Tech Info

Reamers

HSS Endmills

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

E124*

B0610

DIN Taps

Size Ref.

E123*

Carbide Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Tool Holding

ISO Taps

Frese Metallo Duro 3 Taglienti, R40 W, Lunga • SPM offre una prestazione superiore • Fresa universale per cave e lavorazioni di finitura • Geometria tagliente ottimizzate per materiali morbidi • Brt per materiali non ferrosi • TiAlN per Ottimizzare vita utensile

• Optimal • Effective

445

Back to index Contents

Roughers SPM, R30 VA-R, Regular

Carbide Drills

Fresas Desbaste SPM, R30 VA-R, Regular • HSS-SPM • La geometría HR única ofrece un rendimiento estable en materiales difíciles de mecanizar para aplicaciones de desbaste • Ideal para la extracción de viruta de gran volumen

• HSS-SPM • Unique HR geometry offers stable performance in difficult to machine materials for roughing applications • Ideal for large volume metal removal

HSS Drills

Fraises d’ébauche SPM, R30° VA-R • SPM pour une meilleure performance. • Géométie unique HR pour meilleure stabilité pendant l’usinage dans les matériaux difficiles et super-alliages • Adapté aux gros volumes copeaux • Revêtement AlCrN pour une meilleure durée de vie Rompi Truciolo SPM, R30 VA-R, Media • HSS-SPM • Geometria HR unica nell’offrire prestazioni stabili nelle operazioni di sgrossatura • Ideale per alti volumi di asportazione truciolo

ISO Taps HR

45º

Tool Holding

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Vc Page #: 503  l2

6.0 8.0 10.0 10.0 10.0 12.0

57 69

16.0

20.0

25.0

Reamers

30.0 32.0 32.0

Tech Info

E251 E255

104

121

133

ISO VDI 3323

R30 VA-R

R30 VA-R Corner Rad B h6

Item #

E251 0600 E251 0800 E251 1000

•

E255 1025 E255 1040

•

E255 1225 E255 1240

•

E251 1600 E251 1605

•

E255 1625 E255 1640

2.5 4

•

E251 2000 E251 2005

•

E255 2025 E255 2040 E255 2050 E255 2060

2.5 4 5 6

• • •

•

E251 2500

•

E255 2525 E255 2540 E255 2550 E255 2560 E255 3040

2.5 4 5 6 4

• • • •

E251 3200

•

E255 3240

4 N

•

E251 1200 2.5 4

•

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

446

SPM AlCrN

2.5 4

M 8

SPM AlCrN

rad

• • • • • • • • • •

HSS Endmills

0600 0800 1000 1025 1040 1200 1225 1240 1600 1605 1625 1640 2000 2005 2025 2040 2050 2060 2500 2525 2540 2550 2560 3040 3200 3240

• •

Carbide Endmills

• • • • • • • • • • • • • • • •

DIN Taps

d1 (js14)

DIN 844K

E255 B0408

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • • • • • • • • • • • • • • • • • • • •

Size Ref.

E251 B0408

• Optimal • Effective

Contents

Back to index

Roughers SPM, R30 VA-R, Long

Carbide Drills

Fresas Desbaste SPM, R30 VA-R, Larga • HSS-SPM • La geometría HR única ofrece un rendimiento estable en materiales difíciles de mecanizar para aplicaciones de desbaste • Ideal para la extracción de viruta de gran volumen

• HSS-SPM • Unique HR geometry offers stable performance in difficult to machine materials for roughing applications • Ideal for large volume metal removal

HSS Drills

Fraises d’ébauche SPM, R30° VA-R, Long • SPM pour une meilleure performance. • Géométie unique HR pour meilleure stabilité pendant l’usinage dans les matériaux difficiles et super-alliages • Adapté aux gros volumes copeaux • Revêtement AlCrN pour une meilleure durée de vie

ISO Taps

Rompi Truciolo SPM, R30 VA-R, Lunga • HSS-SPM • Geometria HR unica nell’offrire prestazioni stabili nelle operazioni di sgrossatura • Ideale per alti volumi di asportazione truciolo

Vc Page #: 503  Size Ref.

d1 (js14)

6.0 8.0 10.0 12.0 16.0 20.0 25.0

68 88

DIN 844L

B0408 SPM AlCrN

VA R30 VA-R B h6

Item #

E252 0600 E252 0800 E252 1000 E252 1200 E252 1600 E252 2000 E252 2500

110

123

141

166

P 4

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Available on request as special manufacture. Subject to lead time.

• • • • • • • • • • • •

• • • • •

• • • • • • • •

E252

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

0600 0800 1000 1200 1600 2000 2500

E252

Catalogue Code Product Group Material Surface Finish Sutton Designation Geometry Shank Form (DIN 1835) Shank Tolerance

Tool Holding

DIN Taps

45º

Carbide Endmills

447

REAMERS • Hand • Machine (Morse Taper & Chucking) • Bridge • Taper Pin • Morse Taper Socket • Taper Pipe • Adjustable

AVAILABLE IN MULTIPLE LANGUAGES L100 V3EN

L100 V2NL

L100 V2FR

L100 V2DE

Engineers Black Book The Ultimate Reference Book is here… The easy to use pocket-size reference tools containing a wealth of detailed and updated information for the industry and trade. The Black Book series includes the Engineer and Fastener editions. The high quality matt laminated grease proof page ensures long life and glare-free reading. It is wire bound to ensure the book stays flat on workbench when you are reading. The book also comes with a FREE set of bookmarking tabs (Engineer), and thread pitch identification gauge (Fastener). Black Books are the ultimate reference books for engineers, trades people, apprentices, machine shops, tool rooms, technical colleges and purchasing officers.

• Tables • Standards • Illustrations • Conversion factors • Lubricants-coolants • Tolerances • Weights of metal • Geometrical construction • Formulae • Engineering drawing standards • Tapping drill sizes • Speeds & feeds • Equivalent charts • Sharpening information

Contents Sutton N VA GG AI W Ti Ni H

Page

452

455

459

461

462

463

464

R101 HSS Brt N

R102 HSS Co Brt N

R106 HSS Brt Roughing – L7

R107 HSS Brt Finishing – L7

R108 HSS Brt

L10

R105 HSS Brt N – L7

R109 TCA Brt N – Straight

HSS Drills N/mm2 440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 610 880 570 840 460 780 210 360 270 320 460 390 320 360

• • • • • • • •

• • • •

•

• • • • • • • • • • • • •

•

• • •

•

680 950

•

Tool Holding

Condition

– L15

DIN Taps

Material

Tapered Pipe

•

• • • •

•

Carbide Endmills

3323

L10

DIN 212 / ISO 521

HSS Endmills

VDI^

DIN 208

840 1180 1080

Reamers

ISO

R100 Catalogue Code HSS Material Brt Surface Finish N Sutton Designation / ISO Standard DIN 206 236 L10 Geometry

ISO Taps

^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue.

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)

• Optimal • Effective

Tech Info

Material Group Steel Stainless Steel Cast Iron Non-Ferrous Metals, Aluminiums & Coppers Titaniums & Super Alloys Hard Materials (≥ 45 HRC)

UNI

ISO VDI P A M R K F N N S S H H

Carbide Drills

Reamers Finder

451

Back to index Contents

Reamers Hand

Carbide Drills

• For use by hand with suitable wrench • Suitable for tool rooms & workshop use • Produces clean, accurate holes, to a H7 tolerance Alésoirs à main • Pour utilisation universelle à main • Tolérance H7

HSS Drills

Alesatori a Mano • Per uso manuale con propria chiave di trascinamento • Ideale per uso in Tool rooms & reparto produttivo • Produce fori puliti e precisi, a una tolleranza H7 Escariadores Manuales • Para usar a mano con llave adecuada • Adecuado para mantenimiento y uso en talleres • Produce agujeros de precisión, hasta tolerancia H7

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64

17/64 9/32 19/64 5/16

11/32

Tech Info

R100

Item #

R100 0300 R100 0318 R100 0350 R100 0357 R100 0397 R100 0400 R100 0437 R100 0450 R100 0476 R100 0500 R100 0516 R100 0550 R100 0556 R100 0595 R100 0600 R100 0635 R100 0650 R100 0675 R100 0700 R100 0714 R100 0750 R100 0754 R100 0794 R100 0800 R100 0833 R100 0850 R100 0873 R100 0900

100

107

115

124

M 8

N L10

ISO VDI 3323

Brt

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

Reamers

21/64

HSS

•

HSS Endmills

1/4

B0302

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

Carbide Endmills

3.000 3.175 3.500 3.572 3.969 4.000 4.366 4.500 4.762 5.000 5.159 5.500 5.556 5.953 6.000 6.350 6.500 6.747 7.000 7.144 7.500 7.541 7.938 8.000 8.334 8.500 8.731 9.000

• • • • • • • •

DIN Taps

452

0300 0318 0350 0357 0397 0400 0437 0450 0476 0500 0516 0550 0556 0595 0600 0635 0650 0675 0700 0714 0750 0754 0794 0800 0833 0850 0873 0900

• • •

Size Ref.

R100

• Optimal • Effective

Contents

Back to index

Carbide Drills

Reamers Hand • For use by hand with suitable wrench • Suitable for tool rooms & workshop use • Produces clean, accurate holes, to a H7 tolerance Alésoirs à main • Pour utilisation universelle à main • Tolérance H7

HSS Drills

Alesatori a Mano • Per uso manuale con propria chiave di trascinamento • Ideale per uso in Tool rooms & reparto produttivo • Produce fori puliti e precisi, a una tolleranza H7

ISO Taps

Escariadores Manuales • Para usar a mano con llave adecuada • Adecuado para mantenimiento y uso en talleres • Produce agujeros de precisión, hasta tolerancia H7

13/32

7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64

9/16 37/64 19/32 39/64

Item #

124

133

142

152

163

175

R100 0913 R100 0950 R100 0953 R100 0992 R100 1000 R100 1032 R100 1050 R100 1100 R100 1111 R100 1150 R100 1151 R100 1191 R100 1200 R100 1230 R100 1250 R100 1270 R100 1300 R100 1310 R100 1349 R100 1389 R100 1350 R100 1400 R100 1429 R100 1450 R100 1468 R100 1500 R100 1508 R100 1548

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

•

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

DIN Taps

l2 62

•

• • • • • • • •

R100

l1 124

ISO VDI 3323

N L10

Carbide Endmills

3/8 25/64

Brt

HSS Endmills

23/64

HSS

Reamers

9.128 9.500 9.525 9.922 10.000 10.319 10.500 11.000 11.112 11.500 11.509 11.906 12.000 12.303 12.500 12.700 13.000 13.097 13.494 13.891 13.500 14.000 14.288 14.500 14.684 15.000 15.081 15.478

B0302

•

0913 0950 0953 0992 1000 1032 1050 1100 1111 1150 1151 1191 1200 1230 1250 1270 1300 1310 1349 1389 1350 1400 1429 1450 1468 1500 1508 1548

• • •

Size Ref.

R100

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

Tool Holding

453

Back to index Contents

Reamers Hand

Carbide Drills

HSS Drills

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry 5/8 41/64 21/32 43/64 11/16 23/32 3/4 25/32 13/16

7/8 29/32 15/16 31/32

Tech Info

R100

Item #

175

188

201

100

10 10

R100 1588 R100 1600 R100 1627 R100 1667 R100 1700 R100 1707 R100 1746 R100 1800 R100 1826 R100 1900 R100 1905 R100 1984 R100 2000 R100 2064 R100 2100 R100 2143 R100 2200 R100 2223 R100 2300 R100 2302 R100 2381 R100 2400 R100 2461 R100 2500 R100 2540

201

100

201

100

201

100

201

100

215

107

215

107

215

107

215

107

215

107

231

115

231

115

231

115

231

115

231

115

M 8

N L10

ISO VDI 3323

Brt

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

Reamers

HSS

175

•

HSS Endmills

27/32

B0302

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

Carbide Endmills

15.875 16.000 16.272 16.669 17.000 17.066 17.463 18.000 18.256 19.000 19.050 19.844 20.000 20.638 21.000 21.431 22.000 22.225 23.000 23.019 23.813 24.000 24.606 25.000 25.400

• • • • • • • •

DIN Taps

454

1588 1600 1627 1667 1700 1707 1746 1800 1826 1900 1905 1984 2000 2064 2100 2143 2200 2223 2300 2302 2381 2400 2461 2500 2540

• • •

Size Ref.

R100

• Optimal • Effective

Contents

Back to index

Carbide Drills

Reamers Machine • Machine use • Suitable for tool rooms & workshop use • Produces clean, accurate holes, to a H7 tolerance Alésoirs machine cône morse • Pour utilisation universelle sur machines • Tolérance H7

HSS Drills

Alesatori Macchina • Adatto a operazioni su macchine CN • Ideale per uso in Tool rooms & reparto produttivo • Produce fori puliti e precisi, a una tolleranza H7

ISO Taps

Escariadores Cono Morse • Para usar a máquina • Adecuado para mantenimiento y uso en talleres • Produce agujeros de precisión, hasta tolerancia H7

17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32

MT #

Item #

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

R101 0600 R101 0635 R101 0650 R101 0675 R101 0700 R101 0714 R101 0750 R101 0754 R101 0794 R101 0800 R101 0833 R101 0850 R101 0873 R101 0900 R101 0913 R101 0950 R101 0953 R101 0992 R101 1000 R101 1032 R101 1050 R101 1072 R101 1100 R101 1111 R101 1150 R101 1151 R101 1191 R101 1200

144

150

156

162

168

175

182

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

•

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

DIN Taps

l2 26

•

• • • • • • • •

R101

l1 138

ISO VDI 3323

N L10

Carbide Endmills

1/4

Brt

HSS Endmills

HSS

Reamers

6.000 6.350 6.500 6.747 7.000 7.144 7.500 7.541 7.938 8.000 8.334 8.500 8.731 9.000 9.128 9.500 9.525 9.922 10.000 10.319 10.500 10.716 11.000 11.112 11.500 11.509 11.906 12.000

B0302

•

0600 0635 0650 0675 0700 0714 0750 0754 0794 0800 0833 0850 0873 0900 0913 0950 0953 0992 1000 1032 1050 1072 1100 1111 1150 1151 1191 1200

• • •

Size Ref.

R101

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

Tool Holding

455

Back to index Contents

Reamers Machine

Carbide Drills

• Machine use • Suitable for tool rooms & workshop use • Produces clean, accurate holes, to a H7 tolerance Alésoirs machine cône morse • Pour utilisation universelle sur machines • Tolérance H7

HSS Drills

Alesatori Macchina • Adatto a operazioni su macchine CN • Ideale per uso in Tool rooms & reparto produttivo • Produce fori puliti e precisi, a una tolleranza H7 Escariadores Cono Morse • Para usar a máquina • Adecuado para mantenimiento y uso en talleres • Produce agujeros de precisión, hasta tolerancia H7

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

1/2 33/64 17/32 35/64 9/16 37/64 19/32

41/64 21/32

45/64 23/32

Tech Info

R101

MT #

Item #

182

1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

R101 1230 R101 1250 R101 1270 R101 1300 R101 1310 R101 1349 R101 1350 R101 1389 R101 1400 R101 1429 R101 1450 R101 1468 R101 1500 R101 1508 R101 1550 R101 1548 R101 1588 R101 1600 R101 1627 R101 1650 R101 1667 R101 1700 R101 1707 R101 1746 R101 1750 R101 1786 R101 1800 R101 1826

182

189

204

210

214

219

M 8

N L10

ISO VDI 3323

Brt

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

Reamers

43/64 11/16

HSS

182

•

HSS Endmills

39/64 5/8

B0302

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

31/64

•

Carbide Endmills

12.303 12.500 12.700 13.000 13.097 13.494 13.500 13.891 14.000 14.288 14.500 14.684 15.000 15.081 15.500 15.478 15.875 16.000 16.272 16.500 16.669 17.000 17.066 17.463 17.500 17.859 18.000 18.256

• • • • • • • •

DIN Taps

456

1230 1250 1270 1300 1310 1349 1350 1389 1400 1429 1450 1468 1500 1508 1550 1548 1588 1600 1627 1650 1667 1700 1707 1746 1750 1786 1800 1826

• • •

Size Ref.

R101

• Optimal • Effective

Contents

Back to index

Carbide Drills

HSS Drills

Alesatori Macchina • Adatto a operazioni su macchine CN • Ideale per uso in Tool rooms & reparto produttivo • Produce fori puliti e precisi, a una tolleranza H7

ISO Taps

Escariadores Cono Morse • Para usar a máquina • Adecuado para mantenimiento y uso en talleres • Produce agujeros de precisión, hasta tolerancia H7

13/16 27/32

7/8

29/32 15/16

31/32 1

1-1/16

MT #

Item #

223

228

232

237

241

237

241

268

273

277

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3

R101 1850 R101 1900 R101 1905 R101 1950 R101 2000 R101 2050 R101 2064 R101 2100 R101 2143 R101 2150 R101 2200 R101 2223 R101 2250 R101 2300 R101 2302 R101 2350 R101 2381 R101 2400 R101 2450 R101 2461 R101 2500 R101 2540 R101 2550 R101 2600 R101 2650 R101 2699 R101 2700 R101 2750

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

•

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

DIN Taps

l2 58

•

• • • • • • • •

R101

l1 223

ISO VDI 3323

N L10

Carbide Endmills

3/4

Brt

HSS Endmills

HSS

Reamers

18.500 19.000 19.050 19.500 20.000 20.500 20.638 21.000 21.431 21.500 22.000 22.225 22.500 23.000 23.019 23.500 23.813 24.000 24.500 24.606 25.000 25.400 25.500 26.000 26.500 26.987 27.000 27.500

B0302

•

1850 1900 1905 1950 2000 2050 2064 2100 2143 2150 2200 2223 2250 2300 2302 2350 2381 2400 2450 2461 2500 2540 2550 2600 2650 2699 2700 2750

• • •

Size Ref.

R101

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

Tool Holding

457

Back to index Contents

Reamers Machine

Carbide Drills

HSS Drills

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

1-1/8

1-3/16

1-1/4

1-5/16

1-7/16

1-1/2

Tech Info

R101

MT #

Item #

281

285

290

317

321

325

329

333

336

344

3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

R101 2800 R101 2850 R101 2858 R101 2900 R101 2950 R101 3000 R101 3016 R101 3050 R101 3100 R101 3150 R101 3175 R101 3200 R101 3300 R101 3334 R101 3400 R101 3493 R101 3500 R101 3600 R101 3651 R101 3700 R101 3800 R101 3810 R101 3900 R101 4000 R101 4128 R101 4445 R101 4763 R101 5080

M 8

N L10

ISO VDI 3323

Brt

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

Reamers

1-5/8 1-3/4 1-7/8 2

HSS

277

•

HSS Endmills

1-3/8

B0302

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

Carbide Endmills

28.000 28.500 28.575 29.000 29.500 30.000 30.162 30.500 31.000 31.500 31.750 32.000 33.000 33.338 34.000 34.925 35.000 36.000 36.512 37.000 38.000 38.100 39.000 40.000 41.275 44.450 47.625 50.800

• • • • • • • •

DIN Taps

458

2800 2850 2858 2900 2950 3000 3016 3050 3100 3150 3175 3200 3300 3334 3400 3493 3500 3600 3651 3700 3800 3810 3900 4000 4128 4445 4763 5080

• • •

Size Ref.

R101

• Optimal • Effective

Contents

Back to index

Carbide Drills

Reamers Chucking • Machine use • Suitable for tool rooms & workshop use • Produces clean, accurate holes, to a H7 tolerance Alésoirs à machine queue cylindrique • Pour utilisation universelle sur machines • Tolérance H7

HSS Drills

Alesatori Mandrino • Adatto a operazioni su macchine CN • Ideale per uso in Tool rooms & reparto produttivo • Produce fori puliti e precisi, a una tolleranza H7

ISO Taps

Escaradores Máquina • Para usar a máquina • Adecuado para mantenimiento y uso en talleres • Produce agujeros de precisión, hasta tolerancia H7

9/64 5/32

3/16 13/64 15/64 1/4

5/16

3/8

Item #

2.0

2.5

3.0

3.2

3.5

3.6

4.0

4.5

5.0

5.6

101

6.3

101

6.3

109

7.1

109

7.1

117

8.0

117

8.0

117

8.0

125

9.0

125

9.0

133

10.0

133

10.0

133

10.0

142

10.0

R102 0200 R102 0250 R102 0300 R102 0318 R102 0350 R102 0357 R102 0397 R102 0400 R102 0450 R102 0476 R102 0500 R102 0516 R102 0550 R102 0595 R102 0600 R102 0635 R102 0650 R102 0700 R102 0750 R102 0794 R102 0800 R102 0850 R102 0900 R102 0950 R102 0953 R102 1000 R102 1050 R102 1100

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

• • • • • • • • • • • • •

•

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

• Optimal • Effective

DIN Taps

•

• • • • • • • •

R102

l2 11

ISO VDI 3323

l1 49

Carbide Endmills

1/8

N L10

HSS Endmills

Brt

Reamers

2.000 2.500 3.000 3.175 3.500 3.572 3.969 4.000 4.500 4.762 5.000 5.159 5.500 5.953 6.000 6.350 6.500 7.000 7.500 7.938 8.000 8.500 9.000 9.500 9.525 10.000 10.500 11.000

B0302 HSS Co

•

0200 0250 0300 0318 0350 0357 0397 0400 0450 0476 0500 0516 0550 0595 0600 0635 0650 0700 0750 0794 0800 0850 0900 0950 0953 1000 1050 1100

• • •

Size Ref.

R102

Tech Info

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

Tool Holding

459

Back to index Contents

Reamers Chucking

Carbide Drills

• Machine use • Suitable for tool rooms & workshop use • Produces clean, accurate holes, to a H7 tolerance Alésoirs à machine queue cylindrique • Pour utilisation universelle sur machines • Tolérance H7

HSS Drills

Alesatori Mandrino • Adatto a operazioni su macchine CN • Ideale per uso in Tool rooms & reparto produttivo • Produce fori puliti e precisi, a una tolleranza H7 Escaradores Máquina • Para usar a máquina • Adecuado para mantenimiento y uso en talleres • Produce agujeros de precisión, hasta tolerancia H7

ISO Taps

Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry Size Ref.

DIN Taps

Carbide Endmills

1111 1150 1200 1250 1270 1300 1350 1400 1429 1450 1500 1550 1588 1600

7/16

11.112 11.500 12.000 12.500 12.700 13.000 13.500 14.000 14.288 14.500 15.000 15.500 15.875 16.000

1/2

9/16

5/8

R102 B0302 HSS Co Brt

N L10

Item #

142

10.0

142

10.0

151

10.0

151

10.0

151

10.0

151

10.0

160

12.5

160

12.5

162

12.5

162

12.5

162

12.5

170

12.5

170

12.5

170

12.5

R102 1111 R102 1150 R102 1200 R102 1250 R102 1270 R102 1300 R102 1350 R102 1400 R102 1429 R102 1450 R102 1500 R102 1550 R102 1588 R102 1600

HSS Endmills Reamers 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

*Not available once current stock is depleted

S Titanium & Super Alloys H Hard Materials

•

• • •

• • • • • • • • • • • • •

•

R102

• • • • • • • •

Tech Info

460

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Reamers Taper Pin • For use by hand with suitable wrench • For opening out parallel holes to suit 1:48 taper pins Alésoirs à main conique en pouce • Pour utilisation universelle à main, en reprise de trous • Conicité 1:48

HSS Drills

• Alesatori Conico • Per uso manuale con propria chiave di trascinamento • Ideale per allargare conicamente 1:48 un foro già esistente

Series

3/32

#5/0 #4/0 #3/0 #2/0 #0 #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11

7/64 1/8 9/64 5/32 11/64 3/16 7/32 1/4 9/32 11/32 13/32 1/2 9/16 3/4

Brt

N L7

Item #

1.75

3.0

2.41

2.23

3.0

2.89

2.56

3.5

3.29

2.89

4.0

3.68

3.22

4.5

4.10

3.70

5.0

4.64

4.11

5.5

5.19

R105 0238 R105 0278 R105 0318 R105 0357 R105 0397 R105 0437 R105 0476 R105 0556 R105 0635 R105 0714 R105 0873 R105 1032 R105 1270 R105 1429 R105 1905 R105 2223

4.64

6.0

5.85

105

5.28

6.5

6.63

115

6.09

6.5

7.72

130

7.08

7.5

9.00

155

115

8.40

9.0

10.80

175

135

10.11

11.0

12.92

205

155

12.24

14.5

15.47

230

180

14.75

16.0

18.50

285

210

17.93

19.0

22.31

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • •

• • • • • • • • • • • • •

•

• • • • • • • •

R105

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

7/8

HSS

DIN Taps

BS Size

0238 0278 0318 0357 0397 0437 0476 0556 0635 0714 0873 1032 1270 1429 1905 2223

B0302

Carbide Endmills

Size Ref.

R105

HSS Endmills

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

Tool Holding

ISO Taps

Escaradores Cónicos Guias • Para usar a mano con llave adecuada • Para abrir agujeros cónicos de 1:48

461

Back to index Contents

Reamers Morse Taper Socket

Carbide Drills

Escaradores Cónicos Manuales • Para usar a mano con llave adecuada • Adecuado para salas mantenimiento y uso en talleres • Más Basto, abre agujeros existentes • Acabado, para ser utilizado después del desbaste para medida final

• For use by hand with suitable wrench • Suitable for tool rooms & workshop use • Rougher, opens out existing parallel holes • Finishing, to be used after rougher for final sizing

HSS Drills

Alésoirs à main conique pour cônes morse • Pour utilisation universelle à main • Recommandé pour l’ébauche dans les matériaux difficiles ou en reprise de trous existants en mauvaise état. Alesatori Presa Morse • Per uso manuale con propria chiave di trascinamento • Ideale per uso in Tool rooms & reparto produttivo • Sgrossatura, allarga fori già esistenti • Finitura,può essere usato per finire fori già sgrossati

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

DIN Taps

Size Ref.

MT #

0000 0001 0002 0003 0004 0005

0 1 2 3 4 5

R106

R107

B0302

HSS

Brt

Roughing

Finishing

Item #

6.59

8.72

9.24

9.63

11.90

12.52

114

14.79

16.65

18.27

140

19.98

22.22

24.44

175

117

26.14

25.40

31.90

216

152

37.69

34.92

45.27

6 6 6 8 8 10

R106 0000 R106 0001 R106 0002 R106 0003 R106 0004 R106 0005

R107 0000 R107 0001 R107 0002 R107 0003 R107 0004 R107 0005

Carbide Endmills

l1 83

HSS Endmills Reamers 6

M 8

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

462

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

S Titanium & Super Alloys H Hard Materials

• •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• •

R106 R107

• • • • • • • • • • • • • • • •

Tech Info

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Carbide Drills

Reamers Taper Pipe • For use by hand with suitable wrench • Suitable for tool rooms & workshop use • Used prior to tapping tapered thread forms 1:16 taper (BSPT, NPT) • Prolongs tap life, especially in tough materials

HSS Drills

Alésoirs à main conique BSPT/NPT • Pour utilisation universelle à main • Recommandé avant taraudage des filetages BSPT & NPT pour prolonger la durée de vie Alesatori Tubo Conico • Per uso manuale con propria chiave di trascinamento • Ideale per uso in Tool rooms & reparto produttivo • Preparatore al foro conico 1:16 pre filettatura (BSPT,NPT) • Aumenta la durata del maschio, specialmente su materiali difficili

Size

0803 1031 1372 1689 2225 2802 3668 4277 5484

1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

Tool Holding

B0302 HSS Brt

Tapered Pipe L15

Item #

8.00

8.97

10.31

10.00

11.50

13.72

12.50

15.63

16.89

16.00

18.52

R108 0803 R108 1031 R108 1372 R108 1689 R108 2225 R108 2802 R108 3668 R108 4277 R108 5484

22.25

20.00

24.00

28.00

110

25.00

30.08

36.58

119

31.50

38.83

42.77

125

35.50

15.08

54.84

140

40.00

57.40

P 6

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • •

• • • • • • • • • • • • •

•

• • • • • • • •

R108

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

HSS Endmills

Size Ref.

R108

DIN Taps

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

Carbide Endmills

ISO Taps

Escaradores Cónicos Roscas • Para usar a mano con llave adecuada • Adecuado para mantenimiento y uso en talleres • Se usa antes de hacer roscas cónicas 1:16 conicidad (BSPT, NPT) • Prolonga la vida útil del macho, especialmente en materiales resistentes

463

Back to index Contents

Reamers Adjustable

Carbide Drills

• For use by hand with suitable wrench • General purpose • Adjustable size range • TCA (Tungsten Chrome Alloy)

Escaradores Ajustables • Para usar a mano con llave adecuada • Uso general • Rango de medida, ajustable • TCA (aleaciones de tungsteno y cromo)

HSS Drills

Alésoirs réglable • Pour utilisation universelle à main • Ajustable par plage de diamètres • TCA (Alliage de Chrome Tungstène) Alesatori Regolabili • Per uso manuale con propria chiave di trascinamento • Uso generico • Dimensione del tagliente regolabile • TCA (Lega di Cromo Tungsteno)

ISO Taps Tool Holding

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

R109

R110

R111

R112

B0304

TCA

Brt

Reamer

Blade Sets

Pilots

Nuts

DIN Taps Carbide Endmills HSS Endmills

Size Ref.

Size

Range (mm)

Range (inch)

Item #

0635 0715 0795 0870 0950 1025 1100 1200 1350 1500 1675 1825 1975 2150 2375 2700 3025 3425 3800 4600 5600 6975

MA8 MA7 MA6 MA5 MA4 MA3 MA2 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO

6.35–7.15

1/4–9/32

R109 0635 R109 0715 R109 0795 R109 0870 R109 0950 R109 1025 R109 1100 R109 1200 R109 1350 R109 1500 R109 1675 R109 1825 R109 1975 R109 2150 R109 2375 R109 2700 R109 3025 R109 3425 R109 3800 R109 4600 R109 5600 R109 6975

R110 1200 R110 1350 R110 1500 R110 1675 R110 1825 R110 1975 R110 2150 R110 2375 R110 2700 R110 3025 R110 3425 R110 3800 R110 4600 R110 5600 R110 6975

R111 1200 R111 1350 R111 1500 R111 1675 R111 1825 R111 1975 R111 2150 R111 2375 R111 2700 R111 3025 R111 3425 R111 3800

R112 1200 R112 1350 R112 1500 R112 1675 R112 1825 R112 1975 R112 2150 R112 2375 R112 2700 R112 3025 R112 3425 R112 3800 R112 4600 R112 5600 R112 6975

7.15–7.95

9/32–5/16

7.95–8.70

5/16–11/32

8.70–9.50

11/32–3/8

9.50–10.25

3/8–13/32

10.25–11.00

13/32–7/16

11.00–12.00

7/16–15/32

12.00–13.50

15/32–17/32

13.50–15.00

17/32–19/32

15.00–16.75

19/32–21/32

16.75–18.25

21/32–23/32

18.25–19.75

23/32–25/32

19.75–21.50

25/32–27/32

21.50–23.75

27/32–15/16

23.75–27.00

15/16–1-1/16

27.00–30.25

1-1/16–1-3/16

30.25–34.25

1-3/16–1-11/32

34.25–38.00

1-11/32–1-1/2

38.00–46.00

1-1/2–1-13/16

46.00–56.00

1-13/16–2-7/32

56.00–69.75

2-7/32–2-3/4

69.75–85.00

2-3/4–3-11/32

Reamers M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • •

•

R109

• • • •

Tech Info

464

ISO VDI 3323

• Optimal • Effective

Contents

Back to index

Reamers Adjustable

Carbide Drills

Escaradores Ajustables • Para usar a mano con llave adecuada • Uso general • Rango de medida, ajustable • TCA (aleaciones de tungsteno y cromo)

• For use by hand with suitable wrench • General purpose • Adjustable size range • TCA (Tungsten Chrome Alloy)

HSS Drills

Alésoirs réglable • Pour utilisation universelle à main • Ajustable par plage de diamètres • TCA (Alliage de Chrome Tungstène)

Range (mm)

R110

R111

R112

B0304

TCA

Brt

Reamer

Blade Sets

Pilots

Nuts

Range (inch)

Item #

Adjustable Reamer Set

M1 M2P M3 M6 M8

DIN Taps

Size

R109

Pieces

MA4 to ME (Reamers Only)

MA to MH (Reamers & Pilots)

MA4 to MH (Reamers Only)

MA8 to MK (Reamers Only)

MA to MI (Reamers Only)

R109 M1 R109 M2P R109 M3 R109 M6 R109 M8

Adjustable Reamer Pilot Set

MA1

Carbide Endmills

Size Ref.

Catalogue Code Discount Group Material Surface Finish Sutton Designation Geometry

Tool Holding

ISO Taps

Alesatori Regolabili • Per uso manuale con propria chiave di trascinamento • Uso generico • Dimensione del tagliente regolabile • TCA (Lega di Cromo Tungsteno)

R111 MA1

HSS Endmills

MA to MI (Pilots Only)

R109 M8

M 8

9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals

S Titanium & Super Alloys H Hard Materials

•

• • • •

•

• • • •

R109

•

ISO VDI 3323

• Optimal • Effective

Tech Info

Reamers

R111 MA1

465

TECHNICAL INFORMATION • Engineering Black Book • Material Grades • Cutting Data • Troubleshooting

Contents

Technical Information Index

Carbide Drills

Contents

Page

HSS Drills ISO Taps

General

Endmills

Coatings & surface finishes.................................................................................. 508 Conversion tables - metric/imperial................................................................. 510 Useful tables - Tensile Strength vs Hardness (≈)......................................... 512 Manufacturing tolerances..................................................................................... 512 Materials - Tool......................................................................................................... 509 Materials - Workpiece............................................................................................ 472

Endmill terminology................................................................................................ 532 Climb & conventional milling............................................................................... 532 Endmill types............................................................................................................. 533 Speeds & feeds - Carbide...................................................................................................................... 486 - HSS............................................................................................................................. 502

Shank designs - Carbide tools........................................................................................................... 514 - HSS tools.................................................................................................................. 513

Troubleshooting - Endmills................................................................................... 506

Drills

Tool Holding

Drill point types......................................................................................................... 515 Drill terminology....................................................................................................... 515 Drill tolerances........................................................................................................... 515 Hints on use and maintenance........................................................................... 516 Speeds & feeds - Carbide...................................................................................................................... 476 - HSS............................................................................................................................. 478 Troubleshooting - Drills.......................................................................................... 504 Taps

DIN Taps Carbide Endmills

Chamfer type/length............................................................................................... 518 Construction dimensions/designs..................................................................... 518 Fluteless taps - Benefits & features.............................................................................................. 524 - Tapping drill chart.................................................................................................. 525 Lubricants................................................................................................................... 521 Speeds & feeds......................................................................................................... 482 Tap geometry............................................................................................................. 520 Tap hole types........................................................................................................... 519 Tap types..................................................................................................................... 519

HSS Endmills

Tap terminology........................................................................................................ 517 Tapping drill................................................................................................................ 521 Tapping drill formula............................................................................................... 521 Tapping drill size chart............................................................................................ 522 Tapping information................................................................................................ 521 Thread systems - ISO Metric................................................................................................................ 526 - Unified....................................................................................................................... 529 - Whitworth................................................................................................................ 530 - ISO Pipe.................................................................................................................... 531 Troubleshooting - Taps........................................................................................... 505

Reamers Tech Info

468

Contents

Literature Black Books................................................................................................................ 469 Reamers Hints on use .............................................................................................................. 534 Tolerances................................................................................................................... 534 Troubleshooting - Reamers.................................................................................. 507 Enquiry forms for special tools HSS Drills..................................................................................................................... 536 Carbide drills............................................................................................................... 537 Endmills....................................................................................................................... 538 Taps............................................................................................................................... 535

Contents Carbide Drills

Literature Black Books

The ultimate reference book - Matt laminated grease proof pages - Wire bound to stay flat on workbench when reading - Ideal for engineers, trades people, apprentices, machine shops, tool rooms, technical colleges

L100

L200

Discount Group

Z0502

Item #

Size Ref. Description

Edition

Pages

Language

Merchandiser

Item #

V2EN V2DK V2NL V2FI V2FR V2DE

Engineers Black Book Engineers Black Book Engineers Black Book Engineers Black Book Engineers Black Book Engineers Black Book

#3 #2 #2 #2 #2 #2

164

English

499999803

164

Danish

L100 V3EN L100 V2DK L100 V2NL L100 V2FI L100 V2FR L100 V2DE

V1EN

Fastener Black Book

164

Dutch

164

Finnish

499999798

French

499999797

164

German

499999797

248

English

499999803

L200 V1EN

Carbide Endmills

DIN Taps

164

ISO Taps

Catalogue Code

Tool Holding

Fastener Black Book • Screw thread fundamentals • Standards • Thread classes • Thread terminology • Grades • Heat treatment • Materials & coatings • Failures & corrosion • Fastener strengths & markings • Tolerances • Material selection • Hydrogen embrittlement • Screw thread profiles • Torque control • Galling • Dimensional Specifications DIN / ISO / ANSI • Platings • Elevated temperature effects

HSS Drills

Engineers Black Book • Tables • Standards • Illustrations • Grinding wheels • Conversion factors • Tapers • Lubricants-coolants • Spur gear calculations • Hardening & tempering • G Codes • Geometrical construction • Formulae • Engineering drawing standards • Plastics • Tolerances • Bolts & nuts • Tungsten carbide • Keys & keyways • Weights of metal • Tapping drill sizes • Speeds & feeds • Equivalent charts • Sharpening information

BONUS: Thread pitch identification gauge

499999803 - Merchandiser (books sold separately)

Tech Info

Reamers

HSS Endmills

BONUS: Bookmarking tabs

469

Contents Carbide Drills HSS Drills ISO Taps Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

470

Cutting Lubricants Venom

Venom Endurance+ Cutting Fluid Venom Endurance+ Cutting Fluid is a highly efficient cutting and lubricating fluid. Formulated to increase tool life and enhance cutting performance in a broad range of metals including carbon steel, aluminium alloys, copper, brass, bronze and stainless steel. Mild clinging action helps fluid adhere to the tool and part when vertical work is required. Features • Reduces torque and friction • Extends tool life • Improves surface finish • Accurate thread quality • Environmentally friendly mineral oil base with 10% organic coconut oil. Free from Trichloroethane – low odour

Fluide de coupe Venom Endurance + Le fluide de coupe Venom Endurance + est un lubrification de coupe très efficaces Fluide. Formulé pour augmenter la durée de vie des outils et améliorer les performances de coupe dans un large panel de métaux, les aciers carbone, alliages d’aluminium, cuivres, laitons, bronzes et aciers inoxydable. Une légère action d’accrochage aide le fluide à adhérer à l’outil et à la pièce lors d’un travail vertical. Fonctionnalités • Réduit le couple et la friction • Prolonge la durée de vie de l’outil • Améliore la finition de l’état de surface • Huile minérale écologique avec 10% d’huile de coco biologique. Sans trichloroéthane - une faible odeur

Venom Fluido da Taglio Venom Endurance + Cutting Fluid è un fluido lubrificante da taglio altamente efficiente. Formulato per aumentare la durata dell’utensile e migliorare le prestazioni di taglio in a un’ampia gamma di metalli, compreso acciaio al carbonio, leghe di alluminio, rame, ottone, bronzo e acciaio inossidabile. Una leggera azione aderente aiuta il fluido ad aderire sul tagliente e sul materiale da tagliare, quando si lavora in verticale è obbligatorio. Caratteristiche • Riduce la coppia e l’attrito • Allunga la vita dell’utensile • Migliora la finitura superficiale • Accurata qualità del filetto • Olio minerale ecologico base con il 10% di olio di cocco biologico Senza tricloroetano - odore debole

Fluido De Corte Venom Endurance + Cutting es un fluido líquido de corte y lubricación de alta eficiencia. Adecuado para aumentar la vida útil de la herramienta y mejorar el rendimiento de corte en una amplia gama de metales, incluido el carbono acero, aleaciones de aluminio, cobre, latón, bronce y acero inoxidable. La acción de adherencia suave ayuda a que el líquido se adhiera a la herramienta y a la pieza cuando se trabaja en vertical es necesario. Características • Reduce el par y la fricción • Alarga la vida de la herramienta • Mejora el acabado superficial • Calidad de hilo mas precisa • Aceite mineral ecológico base con un 10% de aceite de coco orgánico. Libre de tricloroetano - poco olor

Venom Extreme Power Cutting Paste Formulated for superior tool life and cutting performance in carbon steel, aluminium alloys, copper, bronze, stainless steel, nickels, titaniums and other super alloys. Venom Extreme Power Cutting Paste is a high performance low melting point lubricant specifically designed to adhere to the cutting edges, even when using additional coolants. Features • Low melting point – adheres to cutting edge for greater tool protection • Not affected by coolant • Lowest torque required for higher performance • Reduced friction for extremely high quality surface finish

Venom, pate de taraudage Formulé pour une meilleure durée de vie et performance dans les aciers carbone, alliages aluminium, cuivres, bronzes, inox, titanes, inconels et les super alloys. Pâte de coupe. Le lubrifiant Venom Extreme Power a un point de fusion bas, il est conçu pour adhérer sur l’arêtes de coupe, même lors de l’utilisation liquides de refroidissement supplémentaires. Fonctionnalités • Bas point de fusion - adhère sur l’arete de coupe pour une meilleur protection d’outil • Non affecté par le liquide de refroidissement • Efforts de coupe réduit • Couple et friction réduits, meilleur état de surface

Venom Pasta da Taglio Formulato per una superiore durata utensile e prestazione di taglio su acciai al carbonio,leghe di Alluminio,rame, bronzo,acciaio inossidabile, leghe a base nickel, titanio e tutte le super leghe. La Pasta da taglio Venom Extreme Power Cutting è un lubrificante studiato appositamente per aderire ai bordi del tagliente utensile consentendo di mantenere basso il punto di fusione durante alte prestazioni,anche quando si utilizzano refrigeranti aggiuntivi. Caratteristiche • Basso punto di fusione - aderisce al tagliente per una maggiore protezione dell’utensile • Compatibile con l’utilizzo di altri refrigeranti • Riduce gli sforzi per prestazioni più elevate e durature • Attrito ridotto estremamente garantendo finitura superficiale di alta qualità

Pasta De Corte Formula para una vida útil y rendimiento de corte superior en acero al carbono, aleaciones de aluminio, cobre, bronce, acero inoxidable, níquel, titanio y otras superaleaciones. La pasta de corte Venom Extreme Power tiene un punto de fusión bajo de alto rendimiento lubricante diseñado específicamente para adherirse a los filos de corte, incluso cuando se utiliza refrigerantes adicionales. Caratteristiche • Punto de fusión bajo: se adhiere al filo para mayor proteccion de la herramienta • No se ve afectado por el refrigerante • El par más bajo requerido para mayor rendimiento • Fricción reducida para un acabado superficial de alta calidad

Contents Carbide Drills

Cutting Lubricants Venom

Suitable Applications Cutting, drilling, tapping, milling, broaching, reaming, threading, sawing, boring, turning and holesaw cutting.

HSS Drills

Applications appropriées Perçage, taraudage, fraisage, brochage, alésage, filetage, sciage, alésage et découpage à la scie cloche. Adatto ad Applicazioni di Taglio, foratura, maschiatura, fresatura, brocciatura, alesatura, filettatura, sbavature, tornitura, sega e sega a tazza taglio

M800 0400

M800 0250

Taladrar, roscar, fresar, brochado, escariado, roscado, serrado, torneado y corte con sierra de corona

Catalogue Code Discount Group

250ml 400g

M800 0250 M800 0400

Tests indicate Sutton Tools Venom requires less torque – it performed up to 30% better than its competitors

200

75 0

Aluminium

Carbon Steel

100 0

100

Aluminium

Tests were conducted using a M6 forming tap in carbon steel and aluminium. The results clearly indicate less torque* was required using Sutton Tools Venom Cutting Fluid & Paste compared with leading brands on the market. *Less torque indicates improved performance.

Carbon Steel Venom Competitor X Competitor Y Competitor Z

Carbide Endmills

200

HSS Endmills

150

VENOM

300

VENOM

300

VENOM

225

Torque (Ncm)

400

DIN Taps

TEST 2 – CUTTING FLUID 400

VENOM

TEST 1 – CUTTING PASTE 300

Reamers

Venom Cutting Fluid Venom Cutting Paste

Tech Info

0250 0400

Z1006

Item #

Tool Holding

Size Ref. Description

M800

ISO Taps

Aplicaciones adecuadas

471

Contents

Application Guide Material Workpiece

Carbide Drills

Material Group ISO

HSS Drills ISO Taps Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

472

WKR

DIN

AFNOR

UNI

UNE

JIS

VDI^ 3323

Germany

U.K.

France

Italy

Spain

Sweden

Japan

1.0402

C 22

050 A 20

CC20

C 20 , C 21

F.112

1450

1.0715

9 SMn 28

230 M 07

1912

1.0722

10 SPb 20

1.0736

9 SMn 36

1.0737

9 SMnPb 36

1.0401

C 15

1.0718

9 SMnPb 28

1.1141

Ck 15

080 M 15

32C

XC12 , XC15 , XC18

C15

1.1170

28 Mn 6

150 M 28

14A

20M5

C 28 Mn

2/3

1.0501

C 35

060 A 35

CC35

C 35

2/3

1.0503

C 45

080 M 46

CC45

2/3

1.1191

Ck 45

080 M 46

2/3

1.0726

35 S 20

212 M 36

35 MF 4

2/3

1.1157

40 Mn 4

150 M 36

35 M 5

2/3

1.1167

36 Mn 5

150 M 36

4/5

1.0535

C 55

070 M 55

4/5

1.0601

C 60

080 A 62

4/5

1.1203

Ck 55

070 M 55

4/5

1.1221

Ck 60

080 A 62

4/5

1.1545

C 105 W1

BW 1A

4/5

1.1274

Ck 101

060 A 96

5/9

1.5120

38 MnSi 4

6/7

1.6657

10 NiCrMo 13-4

832 M 13

6/7

1.5423

16 Mo 5

1503-245420

6/7

1.7131

16 MnCr 5

527 M 17

6/7

1.5622

14 Ni 6

6/7

1.5415

15 Mo 3

1501-240

6/7

1.5752

14 NiCr 14

655 M 13

6/7

1.6587

17 CrNiMo 6

820 A 16

6/7

1.7262

15 CrMo 5

6/7

1.7335

13 CrMo 4-4

6/7

1.7380

10 CrMo 9-10

6/7

1.7715

14 MoV 6-3

1501-620 Gr. 27 1501-622 Gr. 31, 45 1503-660440

6/7

1.7015

10 Cr 3

523 M 15

6/8

1.7033

34 Cr 4

530 A 32

6/8

1.7218

25 CrMo 4

1717 CDS 110

6/8

1.6523

21 NiCrMo 2

805 M 20

6/9

1.7220

34 CrMo 4

708 A 37

6/9

1.7225

42 CrMo 4

708 M 40

6/9

1.8509

41 CrAIMo 7

905 M 39

6/9

1.0961

60 SiCr 7

6/9

1.2067

100 Cr 6

6/9

1.2419

105 WCr 6

6/9

1.2542

45 WCrV 7

6/9

1.2713

55 NiCrMoV 6

6/9

1.7035

41 Cr 4

6/9

1.7176

6/9

1.6546

6/9

1.6511

36 CrNiMo 4

816 M 40

110

40 NCD 3

38 NiCrMo 4 (KB)

6/9

1.6582

34 CrNiMo 6

817 M 40

35 NCD 6

35 NiCrMo 6 (KW)

2541

6/9

1.7361

32 CrMo 12

722 M 24

40B

30 CD 12

32 CrMo 12

2240

6/9

1.8159

50 CrV 4

735 A 50

50 CV 4

6/9

1.8523

39 CrMoV 13-9

897 M 39

40C

240 M 07

080 M 15

S250

CF 9 SMn 28

11SMn28

CF 10 SPb 20

10SPb20

11 L 08

S300

CF 9 SMn 36

12SMN35

1215, G 12150

S300Pb

CF 9 SMnPb 36

12SMnP35

1926

CC12

C16

F.111

1350

S 15 CK

1015, G 10170

S250Pb

CF 9 SMnPb 28

11SMnPb28

1914

SUM 22 L

12 L 13, G 12134

S15C

1015, G 10170

41B

SCMn 1

1330

1550

S 35 C

1035, G 10350

C 45

F.114

1650

S45C

1045, G 10430

C 45

F.1140

1672

S48C

1045, G 10420

F.210.G

1957

F.411

2120

SMn438(H)

F.1150

1655

S 55 C

1055

S 58 C

1060, G 10600

1140, G 11400 1039, G10390

C 50

1655

S 55 C

1055

XC 60

C 60

F.1150

1665; 1678

S 58 C

1060, G 10640

C 100 KU

F.5118

1880

SK 3

W 110, T 72301

F.5117

1870

SUP 4

1095, G 10950

SB 450 M

4520, G 45200

SCR 415

5115, G 51170

15 NiCrMo 13

14NiCrMo131

16 Mo 5

16Mo5

16 MC 5

16 MnCr 5

F.1516

16 N 6

14 Ni 6

15Ni6

15 D 3

16 Mo 3

16Mo3

2511

A350LF5 2912

12 NC 15

A204GrA SNC 815 (H)

3310, 3415, 9314, G 33106

18 NiCrMo 7

12 CD 4

12 CrMo 4

12CrMo4

2216

15 CD 3.5

14 CrMo 4 5

14CrMo45

2216

A 182-F11, F12

10 CD 9.10

12 CrMo 9 10

F.155

2218

A 182-F22, J 21890

SCr 415 (H)

5015, G 50150

SCr 430 (H)

5132, G 51320

2225

SCM 420, SCM 430

4130, G 41300

2506

SNCM 220 (H)

8620, G 86170

35 CrMo 4

2234

SCM 432, SCCrM 3

4135, 4137, G 41350

2244

SCM 440 (H) 4140, 4142, G 41400

32 C 4

34 Cr 4 (KB)

25 CD 4 S

25 CrMo 4 (KB)

F.1251

20 NCD 2

20 NiCrMo 2

F.1522

35 CD 4 42 CD 4

42 CrMo 4

40 CAD 6.12

41 CrAlMo 7

60 SC 7

60 SiCr 8

SACM 645

A355GrA, K 24065 9262

BL 3

L 3, T 61203 105 WC 13

BS 1

107 WCr 5 KU

2140

45 WCrV 8 KU

2710

55 NCDV 7 530 M 40

55 Cr 3

527 A 60

40 NiCrMo 2-2

311-Type 7

42 C 4

F.520.S 41 Cr 4

55 C 3

55 Cr 3

40 NCD 2

40 NiCrMo 2 (KB)

51 CrV 4

2253

SKS 31 S 1, T 41901 SKT 4

L 6, T 61206

SCr 440 (H)

5140, G 51400

SUP 9 (A)

5155, G 51550

SNCM 240

8740, G 87400 9840, G 98400

SNCM 447

4340

51CrV4

2230

SUP 10

6145, 6150

X 100 CrMoV 5 1 KU

F.5227

2260

SKD 12

A 2, T 30102

F.5213

2312

SKD 2

36 CrMoV 13 9

6/9

1.8161

58 CrV 4

10 /11

1.5680

12 Ni 19

10 /11

1.2363

X100 CrMoV 5-1

10 /11

1.2436

X210 CrW 12

X 215 CrW 12 1 KU

10 /11

1.2601

X165 CrMoV 12

X 165 CrMoW 12 KU

10 /11

1.3343

S 6-5-2

BM 2

Z 85 WDCV 06.05.04.02

HS 6-5-2

10 /11

1.2344

X40 CrMoV 5-1

BH 13

Z 40 CDV 5

X 40 CrMo 5 1 1 KU

Z 18 N 5 BA 2

1335, G 13350

XC 55

12 C 3

362

12 L 14, G 12144

C 60

18 NCD 6

18B

1213, G 12130

CC 55

36C

36A

1370

SUM 22

F.113

C 55

43D

USA 1020, G 10200

10PbF2

40 M 5 43D

AISI / SAE / UNS

Z 100 CDV 5

2515

2310

F.5318

2722

SKH 51

M 2, T 11302

2242

SKD 61

H 13, T 20813

AFNOR

UNI

UNE

JIS

Germany

U.K.

France

Italy

Spain

Sweden

Japan

USA

10 /11

1.2581

X30 WCrV 9-3

BH 21

Z 30 WCV 9

X 30 WCrV 9 3 KU

SKD 5

H 21, T 20821

10 /11

1.2080

X210 Cr 12

BD 3

Z 200 C 12

X 210 Cr 13 KU

SKD 1

D 3, T 30403

10 /11

1.3243

S 6-5-2-5

BM 35

HS 6-5-2-5

SKH 55

M35

10 /11

1.3348

S 2-9-2

10 /11

1.3255

S 18-1-2-5

BT 4

10 /11

1.3355

S 18-0-1

BT 1

Z 85 WDKCV 06.05.05.04.02 Z 100 DCWV 09.04.02.02 Z 80 WKCV 18.05.04.0 Z 80 WCV 18.04.01

10 /11

1.4718

X45 CrSi 9-3

401 S 45

12 /13

1.4104

X12 CrMoS 17

12 /13

1.4000

X6 Cr 13

12 /13

1.4016

X6 Cr 17

430 S 15

12 /13

1.4113

X6 CrMo 17

434 S 17

12 /13

1.4006

X12 Cr 13

410 S 21

12 /13

1.4001

X7 Cr 14

12 /13

1.4871

X53 CrMnNiN 21-9

349 S 52

12 /13

1.4034

X46 Cr 13

420 S 45

56D

Z 40 C 14

X 40 Cr 14

F.3405

2304

SUS 420J2

12 /13

1.4057

X19 CrNi 17-2

431 S 29

Z 15 CN 16.02

X 16 CrNi 16

F.3427

2321

SUS 431

431, S 43100

12 /13

1.4313

X3 CrNi 13-4

425 C 11

Z 5 CN 13.4

X 6 CrNi 13 04

2385

SCS 5

CA 6-NM, J 91540

12 /13

1.4027

G-X20Cr14

420 C 24

14.1

1.4436

X3 CrNiMo 17-13-3

316 S 33

Z 6 CND 18.12.03

X 5 CrNiMo 17 13 2

2343

SUS 316

316, S 31600

14.1

1.4310

X10 CrNi 18-8

301 S 21

Z 12 CN 17.07

X2CrNi18 07

F.3517

2331

SUS 301

301, S 30100

14.1

1.4401

X5 CrNiMo 17-12-2

316 S 31

Z 6 CND 17.11

X 5 CrNiMo 17 12

F.3543

2347

SUS 316

316, S 31600

14.1

1.4429

X2CrNiMoN 17-13-3

316 S 62

2375

SUS 316 LN

316 LN, S 31653

SUS 303

303, S 30300 304 , 304 H, S 30400

HS 18-0-1

SKH 2

T 1, T 12001

SUH 1

HNV 3, S 65007

T 4, T 12004

Z 45 CS 9

X 45 CrSi 8

420 S 37

Z 10 CF 17

X 10 CrS 17

F.3117

2383

SUS 430 F

430 F, S 43020

403 S 17

Z 6 C 13

X 6 Cr 13

F.3110

2301

SUS 403

403, S 40300

Z 8 C 17

X 8 Cr 17

F.3113

2320

SUS 430

430, S 43000

Z 8 CD 17.01

X 8 CrMo 17

Z10 C 13

X 12 Cr 13

56A

F.3401

2302

F.8401 Z 52 CMN 21.09 X 53 CrMnNiN 21 9

56B

58J

Z 20 C 13 M

SUS 434

434, S 43400

SUS 410

410 S, S 41000

SUS 429

429

SUH 35

EV 8, S 63008

SCS 2

Z 2 CND 17.13 X 2 CrNiMoN 17 13 3 Az

X6 CrNiMoNb 18-12

1.4305

X10 CrNiS 18-10

303 S 21

58M

14.1

1.4301

X5 CrNi 18-10

304 S 15

58E

14.1

1.4571

X6 CrNiMoTi17-12-2

320 S 31

58J

14.1

1.4311

X2 CrNiN 18 10

304 S 62

Z 2 CN 18 .10

14.1

1.4308

G-X6CrNi 18-9

304 C 15

14.1

1.4408

G-X6CrNiMo 18-10

316 C 16

14.1

1.4581

G-X5CrNiMoNb 18

318 C 17

Z 4 CNDNb 18.12GX5CrNiMoNb19 11 2

14.2

1.4845

X12 CrNi 25-21

310 S 24

Z 12 CN 25.20

14.2

1.4878

X12 CrNiTi 18-9

321 S 51

14.2

1.4541

X14 CrNiTi 18-10

321 S 12

14.2

1.4550

X6 CrNiNb 18-10

347 S 17

14.3

1.4545

X5CrNiCuNb15-5-4

14.3

1.4542

X5CrNiCuNb16-4

X 6 CrNiMoNb 17 13

58E

58B 58F

180, 200/220, 220, Grade180, Grade260

Z 10 CNF 18.09

318

X 10 CrNi 18 09

F.3508

2346

Z 6 CN 18.09

X 5 CrNi 18 11

F.3504

2332 , 2333

SUS 304

Z 6 CNT 17.12

X 6 CrNiMoTi 17 12

F.3535

2350

SUS 316 Ti

316 Ti, S 31635

X2CrNiN18 10

F.3541

2371

SUS 304 LN

304 LN, S 30453

2333

SCS 13

CF-8, J 92590

2343

SCS 14

CF-8M, J 92900

F.331

2361

SUH 310; SUS 310 S

F.3523

2337

SUS 321

321 321 H, S 32100

Z 6 CN 18.10 M

X 6 CrNi 25 20

Z6CNT18.12B

SCS 22

Z 6 CNT 18.10

X 6 CrNiTi 18 11

F.3523

2337

SUS 321

Z 6 CNNb 18.10

X 6 CrNiNb 18 11

F.3524

2338

SUS 347

310 S

347, S 34700

EZ5CNU15-05

S15500, 15-5 PH

Z6CNU17-04

S17400, 17-4 PH; 630

FGL200, Ft20D

G 20

FG20

120

FC200

0110-00

FC100

FG 15

0115-00

FC150

200/225, 25B, 30, 30B

0.6010

GG-10

FT 10 D

G10

0.6015

GG 15

Grade 150

FT 15 D

G 15

0.6660

GGL-NiCr202

L-NiCuCr202

L-NC 202

0.7040

GGG 40

SNG 420/12

FCS 400-12

GS400-12

FGE 38-17

0717-02

FCD400

60-40-18

0.6030

GG30

Grade 300

Ft 30 D

G30

FG30

01 30-00

FC300

300/325, 40B, 45/50, 45B

0.6035

GG-35

GRADE 350

Ft35D

G 35

FG 35

135

FC350

0.6040

GG40

GRADE400

Ft 40 D

0.7070

GGG-70

SNG700/2

100

EN-JS1070

FGS 700-2

0.7033

GGG35.3

0.7043

GGG-40.3

370/7

EN-JS1025

FGS 370/17

0.7050

GGG50

SNG500/7

EN-JS1050

FGS 500/7

0523-00

GGG 70

0.7652

GGG-NiMn 13 7

S-NiMn 137

S-Mn 137

0.7660

GGG-NiCr 20 2

Grade S6

S-NC 202

0.6025

GG25

Grade260

0.7060

GGG60

SNG600/3

0.8055

GTW55

0.8135

GTS-35-10

B 340/2

Mn 35-10

0.8145

GTS-45-06

P 440/7

Mn 450-6

GTS-35

B 340/12 8 290/6

MN 32-8

GTS-35

B340/12

MN 35-10

EN-JS1060

GGG 50

FGE50-7

FCD700, FCD700-2

100-70-03 Ni-ResistD-5B, S-NiCr35-3

0717-15

FCD400-18L

60/40/18

0727-02

FCD500, FCD500-7

65-45-12, 70-50-05, 80-55-06 A43D2, Ni-ResistD-2, S-NiCr20-2

0772-00

Ft 25 D

G25

FG25

0717-12

FGS600-3

G 25

FG 25

07 32-03

FC250

100-70-03, 80-55-06, 80-60-03

0727-03

FCD600

A48 40 B

A48-50 A48-60 B

07 17-15

07 37-01

NO 25 B A436 Type 2

140 GGG 70

GTS 35 0852-00

Tool Holding

1.4583

GG 20

M 7, T 11307

HSS Drills

SKH 3

ISO Taps

HS 2-9-2 HS 18-1-1-5

14.1

0.6020

2782

HS 2-9-2 HS 18-1-1-5

14.1

15 /16

2723

DIN Taps

HS 6-5-2-5

AISI / SAE / UNS

Carbide Drills

Contents K

Germany

Carbide Endmills

DIN

3323

HSS Endmills

WKR

VDI^

250/275, 35, 35B, 40

810 0815-00

A220-40010

0810-00

32510

GMN 45

Reamers

ISO

Tech Info

Material Group

473

Contents

Application Guide Material Workpiece

Carbide Drills

Material Group ISO

HSS Drills

WKR

DIN

AFNOR

UNI

UNE

JIS

AISI / SAE / UNS

VDI^ 3323

Germany

U.K.

France

Italy

Spain

Sweden

Japan

USA

0.8035

GTM-35

W340/3

MB35-7

814

AC4A

0.8040

GTW-40

W410/4

MB40-10

08 15

FCMW330

0.8045

0.8065

GTMW-65

0.8155

GTS-55-04

P 510/4

Mn 550-4

0.8165

GTS-65-02

P 570/3

Mn 650-3

0.8170

GTS-70-02

P 690/2

Mn 700-2

GTS-45

P440/7

GTS-65

P 570/3

GTM 35

ISO Taps

3.0205

3.0255

3.3315

AIMg1

3.0505

AlMn0.5Mg0.5

3.0275

Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

474

GTM 40 GTM 45

GMN 55, 65 20 Mn 7

MP 60-3

A220-50005 0854-00

C 36; C 38

0854-00 F.1515-20 Mn 6 1572

70003 FCMP490

90001

SMnC 420

400 10

S 35 C

70003

FCMP540

1000

08 52 AI99.5

A59050C

Al99.7

4508, 9001-3, P-Al99.7

1070A

Al99.7

1070, A1070

1070A

3.0285

Al99.8

1080A

4590, 9001-4, P-Al99.8

1080A, 1080A

3.1325

AlCuMg 1

2017A

P-AlCu4MgMnSi

2017

A92017

3.1655

AICuSiPb

3.2315

AlMgSi1

3.4345

AIZnMgCuO,5

L 86

AZ 4 GU/9051

3.1305

AlCuMg0.5

L86

A-U2G2117

P-AlCu2.5MgSi

2117

3.0517

AlMnCu

3.2381

G-AISi 10 Mg

G-AlSi9Mg

A-S10G

AlSi10Mg

AC4A, ADC3

A03590

3.2382

GD-AISi10Mg

811-04

ADC3

3.2581

G-AISi12

3.3561

G-AIMg 5

3.5101

G-MgZn4sE1Zr1

MAG 5

3.5103

MgSE3Zn27r1

MAG 6

3.5812

G-MgAI8Zn1

NMAG 1

AZ 81

3.5912

G-MgAI9Zn1

MAG 7

AZ 91

3.3549

AlMg5Mn

3.3555

AlMg5

3.3547

AlMg4.5, AlMg4.5Mn

5083

23-24

3.2383

G-AISi0Mg(Cu)

LM9

LM20

Al99.5

7050

G-AlSi13CuMn

AlSi12Cu

5183

EZ 33

P-AlMg4.4

AlMg4.5Mn

A356-72 4244

LM 6

4261

23-24

G-AlSi 12 (Cu)

LM 20

23-24

GD-AlSi12 LM24

2.1871

G-AICu 4 TiMg

3.1754

G-AICu5Ni1,5

3.2163

G-AISi9Cu3

3.2371

G-AISi 7 Mg

3.2373

G-AISI9MGWA

3.5106

G-MgAg3SE2Zr1

mag 12

G-ALMG5

LM5

A95083 A360.2

NF A32-201

LM25

5082

4253

G-AlSi12

GD-AlSi8Cu3

A04130

ZE 41 G-TR3Z2

23-24

AC3A AC7A, ADC5, Al-Mg6

2789;1973

23-24

A-S12U

P-Al99.5

Al99

L31/34/36

23-24 N

GMB40 GMB45

852

A5052

356.1 A413.2

4260

ADC12

A413.1

4247

A6061

A413.0

4250

A7075

A380.1

ADC10 A-S7G

4251

A-SU12

4252

AC4CH

4218 B

C4BS

SC64D QE 22 GD-AISI12

2.1090

G-CuSn 7 5 pb

2.1096

G-CuSn5ZnPb

2.1098

G-CuSn 2 Znpb

2.1182

G-CuPb15Sn

2.0240

CuZn 15

2.0321

CuZn 37

2.0590

G-CuZn40Fe

2.0592

G-CuZn 35 AI 1

U-Z 36 N 3

HTB 1

C 86500

2.1293

CuCrZr

CC 102

U-Cr 0.8 Zr

C 18200

2.0060

E-Cu57

2.0375

CuZn36Pb3

2.0966

CuAI 10 Ni 5 Fe 4

Ca 104

U-A 10 N

2.0975

G-CuAI 10 Ni

2.1050

G-CuSn 10

CT1

2.1052

G-CuSn 12

pb 2

2.1292

G-CuCrF 35

CC1-FF

2.4764

CoCr20W15Ni

U-E 7 Z 5 pb 4

C93200

LG 2

c 83600 C 83600

LB1

U-pb 15 E 8

cz 108

CuZn 36, CuZn 37

C23000 C 2700

C27200

C 63000 B-148-52 c 90700

UE 12 P

C 90800 C 81500

Contents BS

AFNOR

UNI

UNE

JIS

Germany

U.K.

France

Italy

Spain

Sweden

Japan

1.4558

X 2 NiCrAITi 32 20

NA 15

1.4562

X 1 NiCrMoCu 32 28 7

1.4563

X 1 NiCrMoCuN 31 27 4

1.4864

X 12 NiCrSi 36 16

NA 17

1.4865

G-X40NiCrSi38 18

330 C 40

1.4958

X 5 NiCrAITi 31 20

2.4668

NiCr19NbMo

NC20K14

1.4977

X 40 CoCrNi 20 20

Z 42 CNKDWNb

2.4360

NiCu30Fe

2.4603

2.4610

NiMo16cR16Ti

2.4630

NiCr20Ti

2.4642

NiC29Fe

2.4856

NiCr22Mo9Nb

2.4858

2.4375

USA N 08800 N 08031

NA 13

Z 12 NCS 35.16 XG50NiCr39 19

N 08028 SUH 330

INCOLOY DS,, N08330

SCH15

N 08004 AMS 5544

NU 30

HSS Drills

2584

Monel 400

NC22FeD

5390A

HR 5,203-4

NC 20 T

Nimonic 75 lnconel 690

NA 21

NC 22 FeDNb

INCONEL 625, N 26625

NiCr21Mo

NA 16

NC 21 Fe DU

lncoloy 825

NiCu30 Al

NA 18

NU 30 AT

Monel k-500

2.4631

NiCr20TiAI

Hr40;601, NA 20

2.4668

NiCr19FeNbMo

2.4694

NiCr16fE7TiAl

2.4955

NiFe25Cr20NbTi

NC20TA

N 07080

NC 19 Fe Nb

lnconel 718

ISO Taps

Hastelloy C-4 Nnc 30 Fe

2.4668

NiCr19Fe19NbMo

HR8

NC19eNB

2 4670

S-NiCr13A16MoNb

3146-3

NC12AD

5391

2.4662

NiFe35Cr14MoTi

ZSNCDT42

5660

2.4964

5383

CoCr20W15Ni

KC20WN

5537C

C0Cr22W14Ni

KC22WN

AMS 5772

NC 15 TNb A

Tool Holding

lnconel

AISI / SAE / UNS

Carbide Drills

DIN

3323

N07725, Inconel 725 2.4669

NiCr15Fe7TiAl

2.4685

G-NiMo28

2.4810

G-NiMo30

2.4973

NiCr19Co11MoTi

3.7115

TiAl5Sn2

3.7025

Ti 1

2 TA 1

3.7225

Ti 1 pd

TP 1

2 4674

NiCo15Cr10MoAITi

3.7124

TiCu2

3.7145

TiAl6Sn2Zr4Mo2Si

3.7165

TiAl6V4

3.7185

TiAl4Mo4Sn2

3.7195

lnconel X-750 Hastelloy B Hastelloy C

NC19KDT

AMS 5399

DIN Taps

R 50250 R 52250

2 TA 21-24 R 54620 TA 10-13;TA 28 TA 45-51; TA 57

T-A 6 V

TiAl 3 V 2.5

TiAl4Mo4Sn4Si0.5

TiAl5Sn2.5

TA14/17

T-A5E

AMS R54520

TiAl6V4

TA10-13/TA28

T-A6V

AMS R56400

TiAl6V4ELI

TA11 BW 1A

1.1545

C 105 W1

1.2762

75 CrMoNiW 6 7

1.4125

X105 CrMo 17

1.6746

32 nIcRmO 14 5

0.9620

G-X 260 NiCr 4 2

Grade 2 A

0.9625

G-X 330 Ni Cr 4 2

Grade 2 B

0.9630

G-X 300 CrNiSi 9 5 2

0.9640

G-X 300 CrMoNi 15 2 1

0.9650

G-X 260 Cr 27

Grade 3 D

0.9655

G-X 300 CrNMo 27 1

Grade 3 E

1.2419

105 WCr 6

105WC 13

1.4841

X15 CrNiSi 25 20

314 S31

0.9635

G-X 300 CrMo 15 3

0.9645

G-X 260 CrMoNi 20 2 1

AMS R56401 Y1 105

C 100 KU

F-5118

Z 100 CD 17 832 M 31

1880

SK 3

W1 440C

Carbide Endmills

AMS 5397

HSS Endmills

WKR

VDI^

35 NCD 14 0512-00

Ni- Hard 2 Ni- Hard 1

0513-00

Ni-Hard 4 A 532 lll A 25% Cr A 532 lll A 25% Cr

Reamers

ISO

0466-00 Z 15 CNS 25-20

310 107 WCr 5 KU

Tech Info

Material Group

475

Contents

Application Guide Speeds & Feeds - Carbide Drills 3×�

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO

ISO Taps P

Tool Holding M

DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

476

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Geometry Drilling Depth Condition

~ 0.15 %C A 125 1 Steel - Non-alloy, ~ 0.45 %C A 190 2 cast & free cutting QT 250 3 ~ 0.75 %C A 270 4 QT 300 5 A 180 6 Steel - Low alloy & cast QT 275 7 < 5% of alloying elements QT 300 8 QT 350 9 A 200 10 Steel - High alloy, cast & tool HT 325 11 Ferritic / Martensitic A 200 12 Steel - Corrosion Martensitic QT 240 13 resistant & cast Austenitic AH 180 14.1 Stainless Steel Duplex 250 14.2 Precipitation Hardening 250 14.3 Ferritic / Pearlitic 180 15 Cast Iron - Grey (GG) Pearlitic 260 16 Ferritic 160 17 Cast Iron - Nodular Pearlitic 250 18 (GGG) Ferritic 130 19 Cast Iron - Malleable Pearlitic 230 20 60 21 Aluminum & Magnesium Non Heat Treatable Heat Treatable AH 100 22 - wrought alloy 75 23 Aluminum & Magnesium Non Heat Treatable Heat Treatable AH 90 24 - cast alloy ≤12% Si 130 25 Al & Mg - cast alloy >12% Si Non Heat Treatable Free cutting, Pb > 1% 110 26 Copper & Cu alloys Brass (CuZn, CuSnZn) 90 27 (Brass/Bronze) Bronze (CuSn) 100 28 29 Non-metallic - Thermosetting & fiber-reinforced plastics 30 Non-metallic - Hard rubber, wood etc. Fe based A 200 31 High temp. alloys AH 280 32 Ni / Co based A 250 33 AH 350 34 C 320 35 CP Titanium 400 MPa 36 Titanium & Ti alloys Alpha alloys 860 MPa 37.1 Alpha / Beta A 960 MPa 37.2 alloys AH 1170 MPa 37.3 Beta alloys A 830 MPa 37.4 AH 1400 MPa 37.5 HT 45 HRC 38.1 Hardened steel HT 55 HRC 38.2 HT 58 HRC 39.1 HT 62 HRC 39.2 Chilled C 400 40 Cast Iron HT 55 HRC 41

D323

VHM AlCrN N

R30

≤ 3xØ

D329

R30 - IK

D356 VHM HELICA VA R30 - IK ≤ 3xØ

D300

D306

D304

TiCN GG/H Straight Flute ≤ 3xØ

Brt

VHM

Brt

TiCN

NH R15 ≤ 3xØ

N/mm2

Feed #

440

130

130-180

640

130

110-160

840

110

110-160

100

910

110

110-160

100

1010

70-100

610

110

110-160

930

110-160

1010

70-100

1180

680

90-120

1100

680

40-50

810

40-50

610

50-70

840

40-60

840

40-50

610

150

100

880

120

570

100

840

100

460

100

780

100

210

300-400

100-160

140-200

360

300-400

100-160

140-200

270

220-320

100

100-160

140-200

320

220-320

100

100-160

140-200

460

200

200-280

100

100-160

140-200

390

200

100

100-160

140-200

320

200

100

100-160

140-200

360

200

100-160

140-200

50-280

680

30-40

950

30-40

840

30-40

1180

1080

30-40

50-70

40-60

30-50

40-60

30-50

120

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) Bold = Optimal | Regular = Effective

Notes on Drilling

D310

VHM

1. Step feeding or pecking is required for drilling greater than 3 x Ø. 2. W hen drilling cast surface & black (ie: not machined surface), reduce drilling speed by 20%. 3. For optimal positional accuracy and hole size, the use of spot drills is recommended prior to drilling desired hole, refer to our standard range (D175). 4. F or hole depths greater than 7 x Ø, pre-drill initially to pilot start for more accurate hole position and eliminate drill wandering. The pilot can be drilled with short rigid drill, approx. 3 x Ø in depth and reduced feed to ensure accurate pilot hole.

Contents 8×�

12 × � 15 × � 20 × � 30 × �

NC SPOTTING

D358 VHM

D335 VHM

D371

R30 - IK

VA R30 - IK ≤ 5xØ

N R30 - IK ≤ 8xØ

≤ 12xØ

Vc Feed # Vc Feed # Vc Feed # Vc Feed #

D355 Brt

Perturua Tip

N R30 - IK ≤ 15xØ ≤ 20xØ

≤ 30xØ

VHM NC 90° -

D364

D365

AlCrN

Brt

VHM

AlCrN NC 142° -

Vc Feed # Vc Feed # Vc Feed # Vc Feed # VDI^ ISO 3323

Feed #

130

130-180

100

130

110-160

100

110

110-160

110

110-160

70-100

110

110-160

90-120

30-50

40-50

50-70

40-60

30-50

150

120

100

300-400

100

200

100

300-400

100

200

100

220-320

100

180

220-320

180

250

200-280

180

250

130

250

150

250

200

120

30-40

25-35

30-40

50-70

40-60

30-50

40-60

30-50

120

Ø 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 25.0

0.020 0.030 0.040 0.045 0.055 0.070 0.085 0.095 0.125 0.15 0.18

0.025 0.035 0.045 0.055 0.065 0.085 0.105 0.120 0.15 0.18 0.22

0.030 0.045 0.060 0.070 0.080 0.105 0.125 0.15 0.19 0.23 0.27

Feed Table (f) (mm/rev) Feed # 4 5 6 7

0.040 0.055 0.075 0.090 0.100 0.130 0.16 0.18 0.23 0.28 0.33

0.050 0.070 0.090 0.110 0.125 0.16 0.19 0.23 0.29 0.34 0.41

0.060 0.090 0.115 0.135 0.16 0.20 0.24 0.28 0.36 0.42 0.50

0.075 0.110 0.140 0.17 0.19 0.25 0.30 0.34 0.44 0.52 0.60

Use the Item # to return to product page

D366

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO Taps

D375

Tool Holding

D373

DIN Taps

≤ 5xØ

AlCrN

VHM

Carbide Endmills

R30

HELICA

D372

HSS Endmills

D332

VHM AlCrN N

Reamers

D326

METRIC DRILLS (mm size) 8

0.095 0.135 0.18 0.21 0.24 0.31 0.37 0.42 0.54 0.64 0.74

0.120 0.17 0.22 0.26 0.30 0.38 0.46 0.52 0.66 0.80 0.90

0.15 0.21 0.27 0.32 0.37 0.47 0.56 0.64 0.82 0.98 1.10

Ø n vc f vf

= nominal tap size (mm) = spindle speed (RPM) = cutting speed (m/min) = feed (mm/rev) = feed rate (mm/min)

vc × 1000 Ø×π

vc Ø

vc =

nxØ×π 1000

nxØ 318

vf =

fxn

x 318

Tech Info

D368 VHM Brt N R25 ≤ 5xØ

HSS Drills

Carbide Drills

5×�

477

Contents

Application Guide Speeds & Feeds - HSS Drills STUB

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO

ISO Taps P

Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

478

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Geometry Drilling Depth Condition

D186 D100 HSS Blu N R30

D151 HSS Co TiAlN NH R40

≤ 3xØ

D177 HSS Co TiAlN WN R35

≤ 3xØ

D155 SPM TiAlN UNI R40

≤ 3xØ

D153 HSS Co TiAlN VA R40

≤ 3xØ

N/mm2

Feed #

440

Feed # 6

640

840

910

1010

610

5 4

930

1010

1180

680

1100

680

810

610

840

5 4

840

610

880

570

840

460

780

210

112

360

112

270

320

460

390

320

360

680

950

840

1180

1080

1350

3 3

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) Bold = Optimal | Regular = Effective

Notes on Drilling

Contents ≤ 5xØ

D165 HSS Co

D168 SPM

D182 HSS Co

Hard Materials R25

NH R40

WN R35

UNI R40

NH R40 - IK

Colour Tempered

TiAlN

≤ 5xØ

TiAlN

≤ 5xØ

TiAlN

≤ 5xØ

D180 HSS

D169 HSS Co

VA R40

TiAlN Tip

≤ 5xØ

TiAlN

≤ 3xØ

≤ 5xØ

Feed # VDI^ 3323

Feed #

112

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 25.0 32.0 38.0 45.0 52.0 63.0

0.020 0.030 0.040 0.045 0.055 0.070 0.085 0.095 0.125 0.15 0.18 0.23 0.26 0.30 0.33 0.39

Feed Table (f) (mm/rev) Feed # 4 5 6 7

0.025 0.035 0.045 0.055 0.065 0.085 0.105 0.120 0.15 0.18 0.22 0.27 0.32 0.36 0.40 0.47

0.030 0.045 0.060 0.070 0.080 0.105 0.125 0.15 0.19 0.23 0.27 0.33 0.38 0.43 0.48 0.56

0.040 0.055 0.075 0.090 0.100 0.130 0.16 0.18 0.23 0.28 0.33 0.41 0.46 0.52 0.58 0.67

0.050 0.070 0.090 0.110 0.125 0.16 0.19 0.23 0.29 0.34 0.41 0.50 0.56 0.64 0.70 0.80

0.060 0.090 0.115 0.135 0.16 0.20 0.24 0.28 0.36 0.42 0.50 0.60 0.68 0.76 0.84 0.96

0.075 0.110 0.140 0.17 0.19 0.25 0.30 0.34 0.44 0.52 0.60 0.74 0.82 0.92 1.00 1.14

0.095 0.135 0.18 0.21 0.24 0.31 0.37 0.42 0.54 0.64 0.74 0.88 1.00 1.10 1.20 1.35

0.120 0.17 0.22 0.26 0.30 0.38 0.46 0.52 0.66 0.80 0.90 1.10 1.20 1.35 1.45 1.65

METRIC DRILLS (mm size)

0.15 0.21 0.27 0.32 0.37 0.47 0.56 0.64 0.82 0.98 1.10 1.30 1.45 1.60 1.75 1.95

ISO

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

Use the Item # to return to product page

ISO Taps

TiAlN Tip

D163 HSS Co

Tool Holding

TiN

N R30

D109 HSS Co

DIN Taps

D179

Carbide Endmills

Blu

D103

HSS Endmills

Brt

HSS

Reamers

D102

Ø n vc f vf

= nominal tap size (mm) = spindle speed (RPM) = cutting speed (m/min) = feed (mm/rev) = feed rate (mm/min)

vc × 1000 Ø×π

vc Ø

vc =

nxØ×π 1000

nxØ 318

vf =

fxn

x 318

Tech Info

D101

HSS Drills

Carbide Drills

JOBBER

479

Contents

Application Guide Speeds & Feeds - HSS Drills LONG SERIES

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

EXTRA LENGTH

TAPER SHANK

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO

ISO Taps Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

480

VDI^

N/mm2

D171 HSS Co

D194 HSS Co

D195 HSS Co

D196 HSS Co

N R30

NH R40

NH R40 ≤ 10xØ

NH R40 ≤ 12xØ

NH R40 ≤ 14xØ

Blu

TiAlN

≤ 7xØ

Feed #

TiAlN

D141 HSS Co

D115 HSS

D140 HSS

Tough Mat R30 ≤ 5xØ

N R30 ≤ 5xØ

N R30 ≤ 8xØ

Colour Temp

Blu

Feed #

Notes on Drilling

Condition

D113 HSS

~ 0.15 %C A 125 440 16 5 30 5 1 Steel - Non-alloy, ~ 0.45 %C A 190 640 13 5 16 5 2 cast & free cutting QT 250 840 10 5 16 5 3 ~ 0.75 %C A 270 910 10 5 16 5 4 QT 300 1010 10 4 5 A 180 610 10 5 16 5 6 Steel - Low alloy & cast QT 275 930 10 4 16 4 P 7 < 5% of alloying elements QT 300 1010 10 4 8 QT 350 1180 8 4 9 A 200 680 10 5 10 4 10 Steel - High alloy, cast & tool HT 325 1100 8 4 11 Ferritic / Martensitic A 200 680 10 4 12 Steel - Corrosion Martensitic QT 240 810 8 4 13 resistant & cast Austenitic AH 180 610 7 4 10 4 14.1 Stainless Steel Duplex 250 840 M 14.2 Precipitation Hardening 250 840 10 4 14.3 Ferritic / Pearlitic 180 610 16 6 19 6 15 Cast Iron - Grey (GG) Pearlitic 260 880 13 5 16 5 16 Ferritic 160 570 13 6 16 6 17 Cast Iron - Nodular K Pearlitic 250 840 13 6 16 6 18 (GGG) Ferritic 130 460 13 6 16 6 19 Cast Iron - Malleable Pearlitic 230 780 13 6 16 6 20 60 210 20 5 21 Aluminum & Magnesium Non Heat Treatable Heat Treatable AH 100 360 20 5 22 - wrought alloy 75 270 26 5 23 Aluminum & Magnesium Non Heat Treatable Heat Treatable AH 90 320 26 5 24 - cast alloy ≤12% Si 130 460 18 5 25 Al & Mg - cast alloy >12% Si Non Heat Treatable N Free cutting, Pb > 1% 110 390 38 5 26 Copper & Cu alloys Brass (CuZn, CuSnZn) 90 320 26 5 27 (Brass/Bronze) Bronze (CuSn) 100 360 28 40 4 29 Non-metallic - Thermosetting & fiber-reinforced plastics 30 Non-metallic - Hard rubber, wood etc. Fe based A 200 680 31 High temp. alloys AH 280 950 32 Ni / Co based A 250 840 33 AH 350 1180 34 C 320 1080 35 CP Titanium 400 MPa 36 Titanium & Ti alloys S Alpha alloys 860 MPa 37.1 Alpha / Beta A 960 MPa 37.2 alloys AH 1170 MPa 37.3 Beta alloys A 830 MPa 37.4 AH 1400 MPa 37.5 HT 45 HRC 38.1 Hardened steel HT 55 HRC 38.2 HT 58 HRC 39.1 H HT 62 HRC 39.2 Chilled C 400 1350 13 5 16 5 40 Cast Iron HT 55 HRC 41 Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) Bold = Optimal | Regular = Effective

3323

Material

Catalogue Code Material Surface Finish Sutton Designation Geometry Drilling Depth

4 -

Contents NC SPOTTING

COUNTERBORES & COUNTERSINKS

90° -

Brt

N -

Feed #

VDI^

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 25.0 32.0 38.0 45.0 52.0 63.0

0.020 0.030 0.040 0.045 0.055 0.070 0.085 0.095 0.125 0.15 0.18 0.23 0.26 0.30 0.33 0.39

0.025 0.035 0.045 0.055 0.065 0.085 0.105 0.120 0.15 0.18 0.22 0.27 0.32 0.36 0.40 0.47

0.030 0.045 0.060 0.070 0.080 0.105 0.125 0.15 0.19 0.23 0.27 0.33 0.38 0.43 0.48 0.56

Feed Table (f) (mm/rev) Feed # 5 6 7

0.040 0.055 0.075 0.090 0.100 0.130 0.16 0.18 0.23 0.28 0.33 0.41 0.46 0.52 0.58 0.67

0.050 0.070 0.090 0.110 0.125 0.16 0.19 0.23 0.29 0.34 0.41 0.50 0.56 0.64 0.70 0.80

0.060 0.090 0.115 0.135 0.16 0.20 0.24 0.28 0.36 0.42 0.50 0.60 0.68 0.76 0.84 0.96

0.075 0.110 0.140 0.17 0.19 0.25 0.30 0.34 0.44 0.52 0.60 0.74 0.82 0.92 1.00 1.14

0.095 0.135 0.18 0.21 0.24 0.31 0.37 0.42 0.54 0.64 0.74 0.88 1.00 1.10 1.20 1.35

0.120 0.17 0.22 0.26 0.30 0.38 0.46 0.52 0.66 0.80 0.90 1.10 1.20 1.35 1.45 1.65

ISO

METRIC DRILLS (mm size)

0.15 0.21 0.27 0.32 0.37 0.47 0.56 0.64 0.82 0.98 1.10 1.30 1.45 1.60 1.75 1.95

3323

ISO Taps

TiAlN UNI

Use the Item # to return to product page

Tool Holding

C100 HSS Co

DIN Taps

Brt

120°

C108

HSS Co

Carbide Endmills

90°

C107

HSS Endmills

D176

HSS Co TiN N

Reamers

D175

Ø n vc f vf

= nominal tap size (mm) = spindle speed (RPM) = cutting speed (m/min) = feed (mm/rev) = feed rate (mm/min)

vc × 1000 Ø×π

vc Ø

vc =

nxØ×π 1000

nxØ 318

vf =

fxn

x 318

Tech Info

D120 D188 HSS Blu N R30 ≤ 5xØ

HSS Drills

Carbide Drills

REDUCED SHANK

481

Contents

Application Guide Speeds & Feeds - Taps FOR TAPPING BLIND HOLES

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material

Catalogue Code M T183 T187 T189 T684 T231 T233 T235 T237 T241 T239 T197 T201 T205 T207 T221 T227 T229 MF T243 T244 T245 T247 T248 T686 T703 T249 T251 T250 T252 T655 T254 UNC T255 T256 T258 T260 T273 T691 T261 T262 T695 T266 T267 UNF T274 T275 T701 T692 T276 T277 T696 G (BSPF) T278 T279 T281 T282 T283 T699 T284 T285 T351 T352 PM-HSSE HSSE HSSE HSSE HSSE HSSE PM-HSSE V3 PM-HSSE V3 Material HSSE V3 TiAlN TiCN Blu Surface Finish Brt TiN Brt Blu TiN Hardlube Brt CrN Ni Blu TiN CrN Blu TiCN Blu Sutton Designation N N UNI Al W Cu VA DH VA PM NH R45 R45 R45 R50 Geometry R15 R40 R50 R45 2 Flute IK R40 IK Thread Depth ≤ 1.5xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ ≤ 2.5xØ Condition

N/mm2

Vc (m/min)

440

640

840

910

1010

610

930

1010

1180

680

1100

680

810

610

840

610

880

570

840

460

780

210

360

270

320

460

390

320

360

680

950

840

1180

1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) Bold = Optimal | Regular = Effective

Tech Info

482

Notes on Tapping 1. The speeds listed above are a recommendation only, and are based on depth of thread listed, speeds can be adjusted on application. As a general rule; -If hole depth required is less than above mentioned = increase speed -If hole depth required is more than above mentioned = reduce speed 2. Taps must be driven by the square to eliminate slippage, eg, ER-GB collets (square drive). 3. When using spiral flute taps with length compensation tapping attachment, it is recommended to short pitch the feed 95%, to eliminate tap cutting oversize, eg. M6x1 @ 1000RPM, Feed rate= 950mm/min.

Contents FOR TAPPING THROUGH HOLES

T209 T211 T213 T215 T217 T707 T265 T667 T790 T794 T791 T795

T100 T102 T104 T687 T122 T124 T126 T128 T130 T110 T112 T114 T116 T118 T650 T120 T134 T140 T142 T144 T146 T148 T152 T217 T154 T156 T157 T689 T158 T161 T159 T160 T654 T163 T710 T784 T792 T164 T166 T167 T693 T170 T171 T697 T168 T169 T172 T666 T786 T794 T173 T702 T175 T694 T176 T177 T698 T787 T795 T178 T179 T180 T700 T181 T182 T349 T350

Interrupted Threads

Ti Ni L12 R10 ≤ 3xØ

UNI

≤ 3xØ

VA PM

≤ 3xØ

Vc (m/min) -

≤ 3xØ

VA DH

≤ 3xØ

PM-HSS Co TiCN

VDI^

Vc (m/min) -

3323

Ø P n vc vf vr

= nominal tap size (mm) = thread pitch (mm) = spindle speed (RPM) = cutting speed (m/min) = feed rate (mm/min) = feed rate per rev (mm/rev)

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

ISO Taps

≤ 1.5xØ

PM-HSS Co Blu TiCN

Tool Holding

PM-HSSE V3 PM-HSSE V3 TiAlN Blu TiCN Blu

DIN Taps

R15 R10

HSSE PM-HSSE V3 Blu TiCN Blu TiCN

Carbide Endmills

PM-HSSE HSSE HSSE HSSE HSSE V3 Blu TiN Hardlube Ni Blu CrN Brt TiN

HSS Endmills

R15

Brt

Reamers

PM-HSS Co TiCN

METRIC TAPS (mm size) n=

vc × 1000 Ø×π

vc Ø

vc =

nxØ×π 1000

nxØ 318

vf =

x 318

Tech Info

Blu

Use the Item # to return to product page

HSS Drills

Carbide Drills

BLIND HOLES

nxP

483

Contents

Application Guide Speeds & Feeds - Taps FOR TAPPING BLIND / THROUGH HOLES

Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material Steel - Non-alloy, cast & free cutting

Catalogue Code M MF UNC UNF G (BSPF) Material Surface Finish Sutton Designation Geometry Thread Depth Condition A

HB 125

~ 0.15 %C 1 ~ 0.45 %C A 190 2 QT 250 3 ~ 0.75 %C A 270 4 QT 300 5 A 180 6 Steel - Low alloy & cast QT 275 7 < 5% of alloying elements QT 300 8 QT 350 9 A 200 10 Steel - High alloy, cast & tool HT 325 11 Ferritic / Martensitic A 200 12 Steel - Corrosion Martensitic QT 240 13 resistant & cast Austenitic AH 180 14.1 Stainless Steel Duplex 250 14.2 Precipitation Hardening 250 14.3 Ferritic / Pearlitic 180 15 Cast Iron - Grey (GG) Pearlitic 260 16 Ferritic 160 17 Cast Iron - Nodular Pearlitic 250 18 (GGG) Ferritic 130 19 Cast Iron - Malleable Pearlitic 230 20 60 21 Aluminum & Magnesium Non Heat Treatable Heat Treatable AH 100 22 - wrought alloy 75 23 Aluminum & Magnesium Non Heat Treatable Heat Treatable AH 90 24 - cast alloy ≤12% Si 130 25 Al & Mg - cast alloy >12% Si Non Heat Treatable Free cutting, Pb > 1% 110 26 Copper & Cu alloys Brass (CuZn, CuSnZn) 90 27 (Brass/Bronze) Bronze (CuSn) 100 28 29 Non-metallic - Thermosetting & fiber-reinforced plastics 30 Non-metallic - Hard rubber, wood etc. Fe based A 200 31 High temp. alloys AH 280 32 Ni / Co based A 250 33 AH 350 34 C 320 35 CP Titanium 400 MPa 36 Titanium & Ti alloys Alpha alloys 860 MPa 37.1 Alpha / Beta A 960 MPa 37.2 alloys AH 1170 MPa 37.3 Beta alloys A 830 MPa 37.4 AH 1400 MPa 37.5 HT 45 HRC 38.1 Hardened steel HT 55 HRC 38.2 HT 58 HRC 39.1 HT 62 HRC 39.2 Chilled C 400 40 Cast Iron HT 55 HRC 41

T286 T298

T288 T299

T290 T300 T302

T292 T301 T303

T304 T305 HSSE Brt TiN N

T306 T307 HSSE Blu TiCN GG

≤ 1.5xØ

≤ 3xØ

Low Relief

T670 T743

T741 T744

VHM TiCN GG Low Relief

≤ 3xØ

T335 T668

T357 T669

HSSE TiCN DC

IK Vc (m/min)

≤ 3xØ

T294 T343

SPM VHM TiCN XH VH

T308 T808 HSSE Brt TiCN UNI

≤ 1.5xØ

Special Relief

N/mm2 440

640

840

910

1010

610

930

1010

1180

680

1100

680

810

610

840

610

880

570

840

460

780

210

360

270

320

460

390

320

360

680

950

840

1180

1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) Bold = Optimal | Regular = Effective

Tech Info

484

T296 T345

Contents SYNCHRO TAPPING

Multi-Coolant Multi-Coolant Groove Multi-Coolant Groove Groove

≤ 3xØ

Vc (m/min) 18

T682

T377 T379 T373 T375 T365 T367 T369 T371 T381 T383 T754 T756 T758 T760 T762 T764 T766 T768 T770 T772

PM-HSS Co

VHM TiCN N

PM-HSSE V3 TiCN

TiN NH

PM-HSSE V3 TiCN

PM-HSSE V3 CrN

Use the Item # to return to product page

PM-HSSE V3 TiN

High Speed Cutting High Speed Cutting High Speed Cutting High Speed Cutting High Speed Cutting

R50

R50 IK

L20

Multi-Coolant Groove

≤ 3xØ

≤ 2xØ

L20 IK

R45

R45 IK

≤ 2xØ

Vc (m/min)

≤ 2xØ

IK VDI^

Ø P n vc vf vr

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

ISO Taps

SPM TiAlN UNI

T331 T834

Tool Holding

≤ 3xØ

HSSE CrN Cu

T327

DIN Taps

No Groove

T325

Carbide Endmills

TiN

T361 T363 HSSE Brt TiCN N

T329

HSS Endmills

HSSE

T319 T773

Reamers

Brt

T313

METRIC TAPS (mm size)

= nominal tap size (mm) = thread pitch (mm) = spindle speed (RPM) = cutting speed (m/min) = feed rate (mm/min) = feed rate per rev (mm/rev)

vc × 1000 Ø×π

vc Ø

vc =

nxØ×π 1000

nxØ 318

vf =

x 318

Tech Info

T309

HSS Drills

Carbide Drills

THREAD FORMING

nxP

485

Contents

Application Guide Speeds & Feeds - Carbide Endmills Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Type of Cut: Slotting Finishing Universal Roughing Profiling  ap × Ø  ae × Ø Condition

E600

VHM

Brt

•

E603

TiAlN

E502 VHM TiAlN

•

0.75 1.0

HT (Hardened & Tempered), QT (Quenched & Tempered)

Tech Info

486

Notes on Milling 1. A bove values are guidelines for the size and type of cut nominated. 2. For long series tools, reduce speed by 40% and feed by 20%.

2 3 4 5 6 8 10 12 16 20 25

E511 VHM TiAlN N

•

0.75 1.0

•

0.75 1.0

0.5 1.0

E515

• 1.5 0.2

VHM TiAlN N

•

• 1.5 0.2

0.5 1.0

Feed #

E611

1.5 0.2

• 1.5 0.2

N/mm2

Feed #

440

100

144

125

180

640

100

144

125

180

840

100

Feed #

910

100

1010

100

610

100

144

125

180

930

100

1010

100

1180

680

100

1100

680

810

14 14

610

840

14 14

610

112

100

140

880

112

100

140

570

112

100

140

840

112

100

140

460

100

780

100

210

360

270

320

460

390

320

360

680

950

840

1180

1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), Bold = Optimal | Regular = Effective

E507 VHM TiAlN

Feed Table (fz) (mm/tooth) Feed # 8

0.001 0.002 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.010 0.011 0.013 0.014 0.016 0.018 0.020 0.022 0.024 0.026 0.030 0.002 0.003 0.004 0.005 0.006 0.008 0.009 0.010 0.012 0.014 0.016 0.018 0.020 0.023 0.025 0.028 0.032 0.034 0.038 0.042 0.004 0.005 0.006 0.007 0.009 0.010 0.012 0.014 0.016 0.018 0.021 0.023 0.026 0.030 0.032 0.036 0.040 0.044 0.045 0.050 0.005 0.006 0.008 0.009 0.011 0.013 0.015 0.017 0.020 0.023 0.025 0.030 0.032 0.036 0.040 0.044 0.050 0.055 0.060 0.065 0.006 0.008 0.009 0.011 0.013 0.016 0.018 0.021 0.024 0.028 0.030 0.034 0.038 0.042 0.045 0.050 0.055 0.060 0.070 0.075 0.010 0.012 0.014 0.017 0.019 0.022 0.025 0.028 0.032 0.036 0.040 0.045 0.050 0.055 0.060 0.065 0.075 0.080 0.085 0.095 0.013 0.015 0.018 0.021 0.024 0.028 0.032 0.036 0.040 0.045 0.050 0.055 0.060 0.070 0.075 0.085 0.090 0.100 0.11 0.12 0.016 0.019 0.022 0.026 0.030 0.034 0.038 0.044 0.050 0.055 0.060 0.065 0.075 0.080 0.090 0.100 0.11 0.12 0.13 0.14 0.020 0.024 0.028 0.034 0.038 0.044 0.050 0.055 0.060 0.070 0.080 0.085 0.095 0.11 0.12 0.13 0.14 0.16 0.17 0.18 0.022 0.028 0.032 0.038 0.044 0.050 0.060 0.065 0.075 0.085 0.095 0.11 0.12 0.13 0.15 0.16 0.18 0.19 0.21 0.23 0.025 0.032 0.038 0.045 0.055 0.060 0.070 0.080 0.090 0.10 0.12 0.13 0.15 0.16 0.18 0.20 0.22 0.24 0.26 0.29

Contents Vc

1.5 0.2

1.75 1.75 0.5 0.5

•

1.75 1.75 0.2 0.2

Slotting Finishing • Universal Roughing Profiling 1.75 1.75  ap 0.5 0.2  ae

•

6.0 6.0 0.05 0.1

Feed #

100

144

100

180

100

144

100

180

100

120

100

200

100

144

100

180

120

100

120

100

112

140

112

140

112

140

112

140

100

260

150

260

150

260

150

260

150

260

150

190

120

190

120

190

120

100

Ø n vc fz vf z Q ap ae

= nominal tool diameter (mm) = Spindel speed (RPM) = Cutting speed (m/min) = Feed rate per tooth (mm/tooth) = Feed rate (mm/min) = No. cutting edges = Metal removal rate (cm3/min) = Cutting depth (mm) = Cutting width (mm)

200

100

200

120

100

60 60

200

120

200

120

50 50

Feed #

1.75 1.75 0.5 0.5

•

1.5 0.2

•

100

Feed #

1.0 1.0

•

Use the Item # to return to product page

VDI^

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

HSS Drills

Carbide Drills 0.25 0.75 0.75 1.0 0.2 0.2

•

TiAlN

E532 VHM TiAlN N

ISO Taps

Feed #

•

Brt

E637 VHM-ULTRA TiAlN N

Tool Holding

1.5 0.2

•

E604

VHM

DIN Taps

•

E601

Carbide Endmills

1.5 0.2

•

E527 VHM TiAlN N

HSS Endmills

0.5 1.0

•

E523 VHM TiAlN W

Reamers

•

E519 VHM TiAlN W

METRIC ENDMILLS (mm size) n=

vc × 1000 Ø×π

vc Ø

x 318

nxØ×π nxØ 1000 318 Vf fz = z x n vf = fz x z x n vc =

ap x ae × vf 1000

Tech Info

E610 VHM Brt N

487

Contents

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Type of Cut: Slotting Finishing Universal Roughing Profiling  ap × Ø  ae × Ø Condition

E635 VHM-ULTRA TiAlN N

E609 VHM Brt N

•

HT (Hardened & Tempered), QT (Quenched & Tempered)

Tech Info

488

Notes on Milling 1. A bove values are guidelines for the size and type of cut nominated. 2. For long series tools, reduce speed by 40% and feed by 20%.

2 3 4 5 6 8 10 12 16 20 25

•

1.5 0.5

Feed #

E452 VHM Brt N

•

0.05 0.1 Feed #

E450 VHM TiAlN WN

0.75 1.0

1.0 0.4

•

E454 VHM TiAlN N

•

1.0 0.4

•

0.025 0.05

Feed #

0.025 0.05

N/mm2

Feed #

440

210

180

80-140

110-200

640

210

180

80-140

110-200

840

175

100

45-100

60-145

910

175

100

45-100

60-145

1010

175

100

60-145

610

210

180

80-140

110-200

930

175

100

45-100

60-145

1010

175

100

60-145

1180

120

45-95

680

175

100

45-100

60-145

1100

120

45-95

680

810

610

40-60

55-90

840

40-60

55-90

840

610

150

140

70-100

95-145

880

150

140

70-100

95-145

570

150

140

70-100

95-145

840

150

140

70-100

95-145

460

110

100

55-80

80-110

780

110

100

55-80

80-110

210

200

100

300

360

200

100

300

270

200

100

300

320

200

100

300

460

200

100

300

390

320

200

360

680

950

840

1180

1080

120

100

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), Bold = Optimal | Regular = Effective

E547 VHM TiAlN N

Feed Table (fz) (mm/tooth) Feed # 8

Contents Carbide Drills

• •

•

0.025 0.05

•

0.025 0.05

•

0.025 0.05

•

0.025 0.05

•

0.025 0.05

•

0.025 0.05

•

E424 VHM-ULTRA AlCrN UNI

Use the Item # to return to product page

•

Slotting Finishing Universal • • Roughing Profiling 0.25 1.0 1.0  ap 1.0 0.1 0.4  ae

•

0.25 1.0 1.0 1.0 0.25 0.4

VDI^

Feed #

80-140

110-200

100-175

140-250

210

11 210

80-140

110-200

100-175

140-250

210

11 210

45-100

60-145

55-125

75-180

175

11 175

45-100

60-145

55-125

75-180

175

11 175

60-145

55-125

75-180

175

11 175

80-140

110-200

100-175

140-250

210

11 210

45-100

60-145

55-125

75-180

175

11 175

60-145

55-125

75-180

175

11 175

Feed #

3323

45-95

40-85

60-120

120

11 120

45-100

60-145

55-125

75-180

175

11 175

45-95

40-85

60-120

120

11 120

50-75

70-110

40-70

60-100

40-60

55-90

50-75

70-110

40-60

55-90

50-75

70-110

40-70

60-100

70-100

95-145

85-125

120-180

150

11 150

70-100

95-145

85-125

120-180

150

11 150

70-100

95-145

85-125

120-180

150

11 150

70-100

95-145

85-125

120-180

150

11 150

55-80

80-110

70-100

100-140

110

11 110

55-80

80-110

70-100

100-140

110

11 110

150-450

120-350

40-90

60-200

80-120

120

11 120

120

11 120

100

11 100

70-100

120

11 120

100

11 100

Ø n vc fz vf z Q ap ae

HSS Drills

E422 VHM-ULTRA AlCrN UNI

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO Taps

E557 VHM-ULTRA AlCrN N

ISO

Tool Holding

TiAlN

E607 VHM TiAlN N

DIN Taps

Brt

E555 VHM-ULTRA AlCrN N

Carbide Endmills

E553

VHM

HSS Endmills

E551

Reamers

E605 VHM TiAlN N

METRIC ENDMILLS (mm size)

= nominal tool diameter (mm) = Spindle speed (RPM) = Cutting speed (m/min) = Feed rate per tooth (mm/tooth) = Feed rate (mm/min) = No. cutting edges = Metal removal rate (cm3/min) = Cutting depth (mm) = Cutting width (mm)

vc × 1000 Ø×π

vc Ø

x 318

nxØ×π nxØ 1000 318 Vf fz = z x n vf = fz x z x n vc =

ap x ae × vf 1000

Tech Info

E602 VHM Brt N

489

Contents

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Type of Cut: Slotting Finishing Universal Roughing Profiling  ap × Ø  ae × Ø Condition

E533 VHM-ULTRA AlCrN UNI

E535 VHM-ULTRA AlCrN UNI

E559 VHM-ULTRA AlCrN UNI

E426 VHM-ULTRA AlCrN UNI

•

0.25 1.0 1.0 0.25 Feed #

1.5 0.1 Vc

HT (Hardened & Tempered), QT (Quenched & Tempered)

Tech Info

490

Notes on Milling 1. A bove values are guidelines for the size and type of cut nominated. 2. For long series tools, reduce speed by 40% and feed by 20%.

2 3 4 5 6 8 10 12 16 20 25

1.5 0.4

1.5 0.1

Feed #

• 1.5 0.4

Feed #

•

1.0 0.2

1.0 0.4

•

0.25 1.0 1.0 0.2

• 1.0 0.3

N/mm2

440

210

640

210

Feed #

840

175

910

175

1010

175

610

210

930

175

1010

175

1180

120

680

175

1100

120

680

810

610

840

610

150

11 11

880

150

570

150

840

150

460

110

780

110

210

200

360

200

270

200

320

200

460

200

390

320

200

360

680 950

840

1180

1080

120

100

120

100

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), Bold = Optimal | Regular = Effective

•

E430 VHM-ULTRA AlCrN UNI

Feed Table (fz) (mm/tooth) Feed # 8

Contents Carbide Drills

•

0.1 0.05

•

1.0 1.0

E400 VHM-ULTRA CrN Al

1.5 0.2

•

• 1.5 0.2

Feed #

•

1.0 1.0

1.5 0.2

VDI^

Feed #

180

100

175

100

175

100

175

100

180

100

175

100

175

100

2.0 0.4

Feed #

1.5 1.0

Slotting Finishing Universal • Roughing Profiling 2.0  ap 0.6  ae

180

1.5 0.2

•

Use the Item # to return to product page

Feed # -

3323

120

100

175

100

120

140

150

140

150

140

150

140

150

140

100

110

100

110

100

220

200

220

200

220

200

220

200

220

200

160

500

160

500

160

500

120

100

Ø n vc fz vf z Q ap ae

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

HSS Drills

•

E310 VHM Brt Al

ISO Taps

•

E444 VHM Brt Al

Tool Holding

•

1.5 0.4

E458

DIN Taps

1.5 0.4

E457 VHM TiAlN N

Carbide Endmills

1.75 1.75 0.3 0.3

•

E456

HSS Endmills

•

E440 E442 VHM-ULTRA AlCrN UNI

Reamers

•

E549 VHM-ULTRA AlCrN UNI

METRIC ENDMILLS (mm size)

vc × 1000 Ø×π

vc Ø

x 318

nxØ×π nxØ 1000 318 Vf fz = z x n vf = fz x z x n vc =

ap x ae × vf 1000

Tech Info

E545 VHM-ULTRA AlCrN UNI

491

Contents

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Type of Cut: Slotting Finishing Universal Roughing Profiling  ap × Ø  ae × Ø Condition

E402 VHM-ULTRA CrN Al

E478 VHM-ULTRA Brt Al

•

• 1.5 1.0

2.0 0.4

•

• 2.0 0.6

Feed #

1.5 1.0 Vc

HT (Hardened & Tempered), QT (Quenched & Tempered)

Tech Info

492

Notes on Milling 1. A bove values are guidelines for the size and type of cut nominated. 2. For long series tools, reduce speed by 40% and feed by 20%.

2 3 4 5 6 8 10 12 16 20 25

•

2.0 0.4

E446 VHM Brt Al

2.0 0.6

Feed #

1.5 1.0 Vc

2.0 0.4

•

• 2.0 0.6

1.25 1.0

Feed #

2.0 0.4

• 2.0 0.4

N/mm2

440

640

Feed #

840

910

1010

610

930

1010

1180

680

1100

680

810

610

840

610

880

570

840

460

780

210

200

220

360

200

220

270

200

220

320

200

220

460

200

220

390

500

350

160

320

500

350

160

360

500

350

160

680

950

840

1180

1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), Bold = Optimal | Regular = Effective

E480 VHM-ULTRA Brt Al

Feed Table (fz) (mm/tooth) Feed # 8

Contents Feed #

1.0 1.0 Vc

1.0 0.3

Feed #

1.0 1.0 Vc

•

2.0 0.05

2.0 0.06

Slotting Finishing Universal Roughing Profiling 1.75  ap 0.05  ae

•

1.0 0.3

Feed #

100

150

210

100

150

210

100

150

175

100

150

175

100

150

175

100

210

100

150

210

175

100

175

100

120

175

100

150

175

100

120

100

150

120

100

150

100

120

100

150

120

100

150

140

150

140

150

140

150

140

110

100

110

100

200

500

200

500

200

500

200

120

100

120

100

Ø n vc fz vf z Q ap ae

HSS Drills

Carbide Drills 2.3 0.4

•

Use the Item # to return to product page

VDI^

3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

ISO Taps

•

E543 VHM-ULTRA AlCrN NH

Tool Holding

Feed #

2.3 0.2

•

E432 E436 VHM-ULTRA AlCrN NH

DIN Taps

0.25 1.0

0.1 0.05

•

E488 VHM-ULTRA AlCrN VA-R

Carbide Endmills

•

E462 VHM-ULTRA HELICA VA

HSS Endmills

0.1 0.1

•

E459 VHM-ULTRA HELICA VA

Reamers

•

E410 VHM-ULTRA HELICA VA

METRIC ENDMILLS (mm size)

vc × 1000 Ø×π

vc Ø

x 318

nxØ×π nxØ 1000 318 Vf fz = z x n vf = fz x z x n vc =

ap x ae × vf 1000

Tech Info

E408 VHM-ULTRA CrN Al

493

Contents

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Type of Cut: Slotting Finishing Universal Roughing Profiling  ap × Ø  ae × Ø Condition

E562 E564 VHM-ULTRA AlCrN NH

E566 E568 VHM-ULTRA Aldura VH

•

0.5 1.0

•

1.0 0.4

1.0 0.05

Feed #

HT (Hardened & Tempered), QT (Quenched & Tempered)

Tech Info

494

Notes on Milling 1. A bove values are guidelines for the size and type of cut nominated. 2. For long series tools, reduce speed by 40% and feed by 20%.

2 3 4 5 6 8 10 12 16 20 25

E468 E470 VHM-ULTRA AlNova Ti

•

• 1.5 0.05 Feed #

•

1.5 0.05

1.0 0.2

N/mm2

Feed #

440

640

Feed #

840

910

1010

175

610

930

1010

175

1180

120

680

1100

120

680

810

100

610

840

120

840

100

610

880

150

570

840

150

460

780

210

360

270

320

460

390

320

360

680

950

840

1180

1080

14 14

1350

120

140

Condition: A (Annealed), AH (Age Hardened), C (Cast), Bold = Optimal | Regular = Effective

E464 E466 VHM-ULTRA AlNova Ti

Feed Table (fz) (mm/tooth) Feed # 8

Contents Vc

Feed #

175

18 18

120

175

120

18 18

HSS Drills

Carbide Drills 3323

•

4.0 0.2

VDI^

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41 Ø n vc fz vf z Q ap ae

ISO

Tool Holding

4.0 0.05

DIN Taps

3.0 0.2

ISO Taps

0.1 0.05

•

Carbide Endmills

•

Slotting Finishing Universal Roughing Profiling  ap  ae

HSS Endmills

•

Use the Item # to return to product page

Reamers

•

3.0 0.05

E481 VHM-ULTRA Xceed UNI

E477

VHM-ULTRA AlNova Ti-4XL

METRIC ENDMILLS (mm size)

vc × 1000 Ø×π

vc Ø

x 318

nxØ×π nxØ 1000 318 Vf fz = z x n vf = fz x z x n vc =

ap x ae × vf 1000

Tech Info

E476

VHM-ULTRA AlNova Ti-3XL

495

Contents

Application Guide Speeds & Feeds - Micro Carbide Endmills Use the Item #  to return to product page

Carbide Drills

E650 Carbide, 6 Flute, over 6mm

E650 Carbide, 4 Flute, up to 6mm

Application Notes:

Tool Holder

• Above conditions based on 5xØ overhang

Ø n vc Fz vf ap ae

• For 6xØ overhang, reduce ap by 10%

HSS Drills

• For 8xØ overhang, reduce ap by 25% • For 10xØ overhang, reduce ap by 50% • F or plunge in Z-Axis direction or ramping

Overhang

at 1° incline, reduce feed rate between

LEGEND

= nominal tool diameter (mm) = Spindle speed (RPM-1) = Cutting speed (m/min) = Feed rate per tooth (mm/tooth) = Feed rate (mm/min) = Cutting depth (mm) = Cutting width (mm)

60% to 70%

ISO Taps Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

496

ISO

VDI

35 ≤ HRC ≤ 45

45 ≤ HRC ≤ 52

≥ 52 - 68 HRC

Pre-hardened Steel

Hardened Steel

Material

ae x Ø

ap x Ø

0.31

0.05

14300

2150

12700

1910

11100

1670

0.31

0.05

9500

2280

8500

2040

7400

1780

0.31

0.05

7200

2880

6400

2560

5600

2240

0.31

0.05

4800

2220

4200

1940

3700

1710

0.31

0.05

3600

4050

3200

3600

2800

3150

0.31

0.05

2900

3520

2500

3040

2200

2670

0.31

0.05

2400

3130

2100

2740

1900

2480

Contents

Application Guide Speeds & Feeds - Micro Carbide Endmills

Carbide Drills

Use the Item #  to return to product page

E598 Carbide, Micro, 4 Flute, Long Reach, Corner Rad Application Notes: • Above conditions based on 5xØ overhang

Ø n vc Fz vf ap ae

• For 6xØ overhang, reduce ap by 10% • For 8xØ overhang, reduce ap by 25% • For 10xØ overhang, reduce ap by 50% Overhang

• For plunge in Z-Axis direction or ramping at 1° incline, reduce feed rate between

LEGEND

= nominal tool diameter (mm) = Spindle speed (RPM-1) = Cutting speed (m/min) = Feed rate per tooth (mm/tooth) = Feed rate (mm/min) = Cutting depth (mm) = Cutting width (mm)

HSS Drills

Tool Holder

45 ≤ HRC ≤ 52

≥ 52 - 68 HRC

Pre-hardened Steel

Hardened Steel

Material

Ø 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4

ap 0.030 0.019 0.019 0.012 0.012 0.010 0.007 0.005 0.052 0.048 0.048 0.036 0.024 0.064 0.056 0.044 0.032 0.032 0.032 0.030 0.028 0.020 0.014 0.077 0.072 0.067 0.062 0.058 0.053 0.048 0.036 0.024 0.072 0.064 0.056 0.048 0.040 0.040 0.040 0.036 0.032 0.184 0.164 0.144 0.136 0.120 0.104

Vc 96 78 69 61 54 54 54 41 106 101 81 72 63 123 112 102 91 86 81 75 70 70 67 119 114 108 104 98 93 88 86 84 128 128 128 128 128 115 104 92 81 147 134 121 109 99 88

Fz 0.020 0.020 0.020 0.020 0.016 0.015 0.015 0.015 0.022 0.022 0.022 0.020 0.017 0.042 0.042 0.040 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.050 0.047 0.065 0.065 0.065 0.062 0.058 0.054

n 30600 24800 22000 19300 17100 17100 17100 12900 22500 21400 17100 15200 13300 19600 17900 16200 14500 13700 12900 12000 11200 11200 10700 15100 14500 13800 13200 12500 11900 11200 11000 10700 13600 13600 13600 13600 13600 12200 11000 9800 8600 11700 10700 9600 8700 7900 7000

Vf 2480 2000 1780 1560 1080 1040 1000 750 2000 1900 1520 1220 920 3310 3010 2600 2190 2070 1950 1830 1710 1710 1620 2290 2190 2100 2000 1900 1800 1710 1660 1620 2860 2860 2860 2860 2860 2570 2320 1970 1620 3060 2780 2510 2170 1830 1500

ap 0.025 0.016 0.016 0.010 0.010 0.008 0.006 0.004 0.042 0.039 0.039 0.029 0.020 0.052 0.046 0.036 0.026 0.026 0.026 0.025 0.023 0.016 0.011 0.062 0.059 0.055 0.051 0.047 0.043 0.039 0.029 0.020 0.059 0.052 0.046 0.039 0.033 0.033 0.033 0.029 0.026 0.150 0.133 0.117 0.111 0.098 0.085

Vc 85 69 61 53 47 47 47 36 94 89 71 63 56 109 99 90 80 75 71 67 62 62 59 104 101 96 91 87 82 78 76 74 113 113 113 113 113 100 91 81 72 131 117 103 96 87 78

Fz 0.018 0.018 0.018 0.018 0.016 0.015 0.013 0.013 0.019 0.019 0.019 0.018 0.017 0.034 0.034 0.034 0.034 0.034 0.034 0.032 0.030 0.030 0.030 0.034 0.034 0.033 0.033 0.032 0.031 0.030 0.030 0.030 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.041 0.038 0.052 0.052 0.052 0.049 0.046 0.043

n 27000 21900 19400 17000 15100 15100 15100 11300 20000 18900 15100 13400 11800 17300 15800 14300 12800 12000 11300 10600 9900 9900 9400 13300 12800 12200 11600 11100 10500 9900 9700 9400 12000 12000 12000 12000 12000 10600 9700 8600 7600 10400 9300 8200 7600 6900 6200

Vf 1940 1570 1400 1220 950 880 810 610 1550 1470 1170 990 810 2340 2120 1920 1720 1620 1530 1370 1200 1200 1140 1820 1720 1620 1510 1410 1310 1200 1170 1140 2020 2020 2020 2020 2020 1790 1640 1400 1160 2160 1940 1720 1500 1280 1060

ap 0.023 0.014 0.014 0.009 0.009 0.007 0.005 0.004 0.039 0.036 0.036 0.027 0.018 0.048 0.042 0.033 0.024 0.024 0.024 0.023 0.021 0.015 0.010 0.058 0.054 0.050 0.047 0.043 0.040 0.036 0.027 0.018 0.054 0.048 0.042 0.036 0.030 0.030 0.030 0.027 0.024 0.138 0.123 0.108 0.102 0.090 0.078

Vc 79 64 57 50 44 44 44 33 87 83 66 59 52 102 92 84 75 70 67 62 58 58 55 97 93 90 85 81 77 73 71 69 106 106 106 106 106 95 86 76 67 122 109 98 89 80 73

Fz 0.016 0.016 0.016 0.016 0.013 0.012 0.011 0.011 0.017 0.017 0.017 0.016 0.015 0.029 0.029 0.03 0.029 0.03 0.029 0.028 0.026 0.026 0.026 0.03 0.029 0.029 0.028 0.028 0.027 0.026 0.027 0.026 0.037 0.037 0.037 0.037 0.037 0.037 0.037 0.035 0.033 0.045 0.046 0.046 0.044 0.041 0.037

n 25200 20400 18100 15900 14100 14100 14100 10600 18500 17600 14100 12500 11000 16200 14700 13300 11900 11200 10600 9900 9300 9300 8800 12400 11900 11400 10800 10300 9800 9300 9000 8800 11200 11200 11200 11200 11200 10100 9100 8100 7100 9700 8700 7800 7100 6400 5800

Vf 1590 1280 1140 1000 760 700 630 480 1270 1210 970 810 640 1910 1730 1570 1400 1330 1250 1110 980 980 930 1490 1400 1320 1230 1150 1070 980 960 930 1650 1650 1650 1650 1650 1490 1340 1140 930 1760 1590 1420 1240 1050 860

Tool Holding

35 ≤ HRC ≤ 45

DIN Taps

VDI

Carbide Endmills

HSS Endmills

Reamers

Tech Info

ISO

ISO Taps

60% to 70%

497

Contents

Application Guide Speeds & Feeds - Micro Carbide Endmills Use the Item #  to return to product page

Carbide Drills

E580 Carbide, Micro, 2 Flute, Long Reach, Sq End

E581 Carbide, Micro, 2 Flute, Corner Rad

Application Notes:

Tool Holder

• Above conditions based on 5xØ overhang

Ø n vc Fz vf ap ae

• For 6xØ overhang, reduce ap by 10%

HSS Drills

• For 8xØ overhang, reduce ap by 25% • For 10xØ overhang, reduce ap by 50% • F or plunge in Z-Axis direction or ramping

Overhang

at 1° incline, reduce feed rate between

LEGEND

= nominal tool diameter (mm) = Spindle speed (RPM-1) = Cutting speed (m/min) = Feed rate per tooth (mm/tooth) = Feed rate (mm/min) = Cutting depth (mm) = Cutting width (mm)

60% to 70%

ISO Taps Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

498

ISO

VDI

5, 8, 9, 10, 11

14.2, 14.3

34, 35, 37.3, 37.5

38.1

Steel - Low alloy & cast Steel - High alloy, cast & tool

Stainless Steel

High temp. alloys Titanium & Ti alloys

Hardened Steel

Material

ae x Ø

0.2

0.5

1.0

0.028 25 0.003 40000 240 0.028 25 0.003 40000 240 0.028 25 0.003 40000 240 0.040 25 0.003 40000 240

0.2

1.0

0.011 23 0.003 37400 210 0.011 23 0.003 37400 210 0.011 23 0.003 37400 210 0.016 23 0.003 37400 210

0.2

1.5

1.0

0.008 22 0.003 34800 182 0.008 22 0.003 34800 182 0.008 22 0.003 34800 182 0.011 22 0.003 34800 182

0.4

1.0

0.022 47 0.004 37400 280 0.022 47 0.004 37400 280 0.022 47 0.004 37400 280 0.032 47 0.004 37400 280

0.4

1.0

0.011 37 0.003 29600 175 0.011 37 0.003 29600 175 0.011 37 0.003 29600 175 0.016 37 0.003 29600 175

0.5

1.0

0.035 62 0.007 39099 513 0.035 62 0.007 39099 513 0.035 62 0.007 39099 513 0.050 63 0.004 40000 320

0.5

1.0

0.018 50 0.005 31474 332 0.018 50 0.005 31474 332 0.018 50 0.005 31474 332 0.025 51 0.003 32200 207

0.5

1.0

0.012 42 0.004 26391 234 0.012 42 0.004 26391 234 0.012 42 0.004 26391 234 0.017 43 0.003 27000 146

0.6

1.0

0.028 59 0.007 31246 423 0.028 59 0.007 31246 423 0.028 59 0.007 31246 423 0.040 63 0.007 33554 443

0.6

1.0

0.017 50 0.006 26577 306 0.017 50 0.006 26577 306 0.017 50 0.006 26577 306 0.024 54 0.006 28540 321

0.8

1.0

0.045 65 0.007 26042 410 0.045 65 0.007 26042 410 0.045 65 0.007 26042 410 0.064 75 0.007 29762 466

0.8

1.0

0.032 61 0.007 24231 355 0.032 61 0.007 24231 355 0.032 61 0.007 24231 355 0.046 70 0.007 27693 404

0.8

1.0

0.022 52 0.006 20610 257 0.022 52 0.006 20610 257 0.022 52 0.006 20610 257 0.032 59 0.006 23555 292

1.0

0.047 61 0.008 19385 337 0.047 61 0.008 19385 337 0.047 61 0.008 19385 337 0.067 70 0.008 22155 383

1.0

0.035 56 0.008 17937 289 0.035 56 0.008 17937 289 0.035 56 0.008 17937 289 0.050 64 0.008 20499 328

1.0

0.028 52 0.007 16489 244 0.028 52 0.007 16489 244 0.028 52 0.007 16489 244 0.040 59 0.007 18844 277

1.0

0.023 47 0.006 15040 203 0.023 47 0.006 15040 203 0.023 47 0.006 15040 203 0.033 54 0.006 17189 231

1.0

0.018 38 0.005 12144 132 0.018 38 0.005 12144 132 0.018 38 0.005 12144 132 0.025 44 0.005 13878 150

1.2

1.0

0.067 65 0.010 17361 357 0.067 65 0.010 17361 357 0.067 65 0.010 17361 357 0.096 75 0.010 19841 406

1.2

1.0

0.042 56 0.008 14947 265 0.042 56 0.008 14947 265 0.042 56 0.008 14947 265 0.060 64 0.008 17083 301

1.2

1.0

0.034 52 0.008 13740 224 0.034 52 0.008 13740 224 0.034 52 0.008 13740 224 0.048 59 0.008 15703 254

1.5

1.0

0.105 70 0.013 14855 391 0.105 70 0.013 14855 391 0.105 70 0.013 14855 391 0.150 80 0.013 16977 444

1.5

1.0

0.084 65 0.012 13889 341 0.084 65 0.012 13889 341 0.084 65 0.012 13889 341 0.120 75 0.012 15873 388

1.5

1.0

0.053 56 0.010 11958 253 0.053 56 0.010 11958 253 0.053 56 0.010 11958 253 0.075 64 0.010 13666 287

1.5

1.0

0.042 52 0.009 10992 214 0.042 52 0.009 10992 214 0.042 52 0.009 10992 214 0.060 59 0.009 12563 243

1.5

1.0

0.032 47 0.008 10027 178 0.032 47 0.008 10027 178 0.032 47 0.008 10027 178 0.046 54 0.008 11459 202

2.0

1.0

0.187 70 0.015 11141 350 0.187 70 0.015 11141 350 0.187 70 0.015 11141 350 0.267 80 0.015 12733 398

2.0

1.0

0.140 70 0.015 11141 350 0.140 70 0.015 11141 350 0.140 70 0.015 11141 350 0.200 80 0.015 12733 398

2.0

1.0

0.112 65 0.014 10416 306 0.112 65 0.014 10416 306 0.112 65 0.014 10416 306 0.160 75 0.014 11905 348

2.0

1.0

0.093 61 0.013 9692

265 0.093 61 0.013 9692

265 0.133 70 0.013 11077 301

2.0

1.0

0.070 56 0.012 8968

227 0.070 56 0.012 8968

227 0.100 64 0.012 10250 258

2.0

1.0

0.056 52 0.011 8244

192 0.056 52 0.011 8244

192 0.080 59 0.011 9422

218

2.0

1.0

0.047 47 0.010 7520

159 0.047 47 0.010 7520

159 0.067 54 0.010 8594

181

2.5

1.0

0.233 70 0.018 8913

336 0.233 70 0.018 8913

336 0.333 80 0.018 10186 382

2.5

1.0

0.175 70 0.018 8913

336 0.175 70 0.018 8913

336 0.250 80 0.018 10186 382

3.0

1.0

0.168 65 0.020 6944

285 0.168 65 0.020 6944

285 0.240 75 0.020 7936

325

3.0

1.0

0.140 61 0.018 6461

247 0.140 61 0.018 6461

247 0.200 70 0.018 7385

281

3.0

1.0

0.105 56 0.017 5979

212 0.105 56 0.017 5979

212 0.150 64 0.017 6833

241

Contents

Application Guide Speeds & Feeds - Micro Carbide Endmills

Carbide Drills

Use the Item #  to return to product page

E582 Carbide, Micro, 2 Flute, Long Reach, Ballnose Application Notes: • Above conditions based on 5xØ overhang

Ø n vc Fz vf ap ae

• For 6xØ overhang, reduce ap by 10% • For 8xØ overhang, reduce ap by 25% • For 10xØ overhang, reduce ap by 50% Overhang

• For plunge in Z-Axis direction or ramping at 1° incline, reduce feed rate between

LEGEND

= nominal tool diameter (mm) = Spindle speed (RPM-1) = Cutting speed (m/min) = Feed rate per tooth (mm/tooth) = Feed rate (mm/min) = Cutting depth (mm) = Cutting width (mm)

HSS Drills

Tool Holder

Stainless Steel

High temp. alloys Titanium & Ti alloys

Hardened Steel

ae x Ø ap x Ø

0.003 40000

240

0.003 40000

240

0.003 40000

240

0.003 40000

240

0.2

0.5

0.05

0.20

0.2

0.05

0.20

0.003 40000

240

0.003 40000

240

0.003 40000

240

0.003 40000

240

0.2

1.5

0.05

0.15

0.002 34000

144

0.002 34000

144

0.002 34000

144

0.002 34000

144

0.4

0.05

0.20

0.004 40000

320

0.004 40000

320

0.004 40000

320

0.004 40000

320

0.4

0.02

0.10

0.003 28000

160

0.003 28000

160

0.003 28000

160

0.003 28000

160

0.5

0.05

0.20

0.006 39099

433

0.006 39099

433

0.006 39099

433

0.004 40000

320

0.5

0.02

0.10

0.004 27369

217

0.004 27369

217

0.004 27369

217

0.003 28000

160

0.6

0.05

0.20

0.006 35916

448

0.006 35916

448

0.006 35916

448

0.006 38568

469

0.6

0.05

0.15

0.004 30528

269

0.004 30528

269

0.004 30528

269

0.004 32783

281

0.6

0.02

0.10

0.004 25141

224

0.004 25141

224

0.004 25141

224

0.004 26998

234

0.6

0.02

0.10

0.004 25141

224

0.004 25141

224

0.004 25141

224

0.004 26998

234

0.8

0.05

0.20

0.007 27852

406

0.007 27852

406

0.007 27852

406

0.007 31831

462

0.8

0.05

0.15

0.005 23674

244

0.005 23674

244

0.005 23674

244

0.005 27056

277

0.8

0.02

0.10

0.005 19496

203

0.005 19496

203

0.005 19496

203

0.005 22282

231

1.0

0.05

0.20

0.009 22282

395

0.009 22282

395

0.009 22282

395

0.009 25465

449

1.0

0.05

0.15

0.006 18940

237

0.006 18940

237

0.006 18940

237

0.006 21645

269

1.0

0.05

0.15

0.006 18940

237

0.006 18940

237

0.006 18940

237

0.006 21645

269

1.0

0.02

0.10

0.006 15597

197

0.006 15597

197

0.006 15597

197

0.006 17826

224

1.0

0.02

0.10

0.006 15597

197

0.006 15597

197

0.006 15597

197

0.006 17826

224

1.0

0.02

0.10

0.006 15597

197

0.006 15597

197

0.006 15597

197

0.006 17826

224

1.0

0.02

0.10

0.006 13369

158

0.006 13369

158

0.006 13369

158

0.006 15279

179

1.2

0.05

0.15

0.006 15783

210

0.006 15783

210

0.006 15783

210

0.006 18037

239

1.2

0.05

0.15

0.006 15783

210

0.006 15783

210

0.006 15783

210

0.006 18037

239

1.2

0.02

0.10

0.006 12998

175

0.006 12998

175

0.006 12998

175

0.006 14854

199

2.0

0.05

0.20

0.014 11141

315

0.014 11141

315

0.014 11141

315

0.014 12733

359

2.0

0.05

0.20

0.014 11141

315

0.014 11141

315

0.014 11141

315

0.014 12733

359

2.0

0.05

0.15

0.010

9469

189

0.010

9469

189

0.010

9469

189

0.010 10823

215

2.0

0.05

0.15

0.010

9469

189

0.010

9469

189

0.010

9469

189

0.010 10823

215

2.0

0.02

0.10

0.010

7798

158

0.010

7798

158

0.010

7798

158

0.010

179

8913

2.0

0.02

0.10

0.010

7798

158

0.010

7798

158

0.010

7798

158

0.010

8913

179

3.0

0.05

0.20

0.019

7427

289

0.019

7427

289

0.019

7427

289

0.019

8488

328

3.0

0.05

0.20

0.019

7427

289

0.019

7427

289

0.019

7427

289

0.019

8488

328

3.0

0.05

0.15

0.013

6313

173

0.013

6313

173

0.013

6313

173

0.013

7215

197

3.0

0.02

0.10

0.013

5199

144

0.013

5199

144

0.013

5199

144

0.013

5942

164

Tool Holding

Steel - Low alloy & cast Steel - High alloy, cast & tool

Material

DIN Taps

H 38.1

Carbide Endmills

S 34, 35, 37.3, 37.5

HSS Endmills

M 14.2, 14.3

Reamers

P 5, 8, 9, 10, 11

Tech Info

ISO VDI

ISO Taps

60% to 70%

499

Contents

Application Guide Dynamic & Trochoidal Cutting parameters Use the Item #  to return to product page

Carbide Drills

E472 -E475 Carbide, 5 Flute, R40/42 Ni, DIN6527L, Harmony

ROUGHING ISO

HSS Drills

ISO Taps

VDI^ 3323

Material

Condition

~ 0.15 %C A 1 A 2 Steel - Non-alloy, ~ 0.45 %C QT 3 cast & free cutting A 4 ~ 0.75 %C QT 5 A 6 QT 7 Steel - Low alloy & cast QT 8 < 5% of alloying elements QT 9 A 10 Steel - High alloy, cast & tool HT 11 A 12 Steel - Corrosion Ferritic / Martensitic Martensitic QT 13 resistant & cast Austenitic AH 14.1 Duplex 14.2 Stainless Steel Precipitation Hardening 14.3 A 31 Fe based AH 32 A 33 High temp. alloys Ni / Co based AH 34 C 35

N/mm2

125 190 250 270 300 180 275 300 350 200 325 200 240 180 250 250 200 280 250 350 320

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 680 950 840 1180 1080

Common Grades 1020, S1214L 1045 1055, 1060 4140, 4340

A2, H13 (SKD61), D2 SS430, 431, 440C 303, 304, 316 321, 341 15-5Ph, 17-4Ph Inconel 625 Inconel 718 Inconel 718

Tool Recommended Vc (m/ min) Engagement Angle ae 270 270 270 270 210 270 270 210 210 270 210 210 210 150 100 100 60 50 50 40 30

53°

0.2x d1

46°

0.15 x d1

37°

0.1 x d1

31°

0.08 x d1

Max

6mm

8mm

10mm

12mm

16mm

20mm

0.044 0.044 0.044 0.044 0.042 0.044 0.044 0.042 0.042 0.044 0.042 0.042 0.042 0.039 0.048 0.048 0.045 0.045 0.045 0.045 0.045

0.070 0.070 0.070 0.070 0.063 0.070 0.070 0.063 0.063 0.070 0.063 0.063 0.063 0.054 0.063 0.063 0.060 0.060 0.060 0.060 0.060

0.088 0.088 0.088 0.088 0.081 0.088 0.088 0.081 0.081 0.088 0.081 0.081 0.081 0.066 0.081 0.081 0.075 0.075 0.075 0.075 0.075

0.106 0.106 0.106 0.106 0.096 0.106 0.106 0.096 0.096 0.106 0.096 0.096 0.096 0.081 0.096 0.096 0.090 0.090 0.090 0.090 0.090

0.140 0.140 0.140 0.140 0.129 0.140 0.140 0.129 0.129 0.140 0.129 0.129 0.129 0.105 0.129 0.129 0.120 0.120 0.120 0.120 0.120

0.176 0.176 0.176 0.176 0.159 0.176 0.176 0.159 0.159 0.176 0.159 0.159 0.159 0.132 0.162 0.162 0.150 0.150 0.150 0.150 0.150

UNIVERSAL ISO

Tool Holding

DIN Taps

VDI^ 3323

Material

Condition

N/mm2

125 190 250 270 300 180 275 300 350 200 325 200 240 180 250 250 200 280 250 350 320

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 680 950 840 1180 1080

Common Grades 1020, S1214L 1045 1055, 1060 4140, 4340

A2, H13 (SKD61), D2 SS430, 431, 440C 303, 304, 316 321, 341 15-5Ph, 17-4Ph Inconel 625 Inconel 718 Inconel 718

Tool Recommended Vc (m/ min) Engagement Angle ae 290 290 290 290 230 290 290 230 230 290 230 230 230 170 110 110 60 50 50 40 30

46°

0.15x d1

37°

0.10 x d1

31°

0.08 x d1

26°

0.05 x d1

Max

6mm

8mm

10mm

12mm

16mm

20mm

0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.048 0.054 0.054 0.045 0.045 0.045 0.045 0.045

0.084 0.084 0.084 0.084 0.075 0.084 0.084 0.075 0.075 0.084 0.075 0.075 0.075 0.063 0.069 0.069 0.060 0.060 0.060 0.060 0.060

0.105 0.105 0.105 0.105 0.096 0.105 0.105 0.096 0.096 0.105 0.096 0.096 0.096 0.081 0.087 0.087 0.075 0.075 0.075 0.075 0.075

0.126 0.126 0.126 0.126 0.114 0.126 0.126 0.114 0.114 0.126 0.114 0.114 0.114 0.096 0.105 0.105 0.090 0.090 0.090 0.090 0.090

0.168 0.168 0.168 0.168 0.153 0.168 0.168 0.153 0.153 0.168 0.153 0.153 0.153 0.129 0.141 0.141 0.120 0.120 0.120 0.120 0.120

0.210 0.210 0.210 0.210 0.189 0.210 0.210 0.189 0.189 0.210 0.189 0.189 0.189 0.162 0.174 0.174 0.150 0.150 0.150 0.150 0.150

FINISHING Carbide Endmills

ISO

HSS Endmills

Reamers Tech Info

500

VDI^ 3323

Material

Condition

N/mm2

125 190 250 270 300 180 275 300 350 200 325 200 240 180 250 250 200 280 250 350 320

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 680 950 840 1180 1080

Common Grades 1020, S1214L 1045 1055, 1060 4140, 4340

A2, H13 (SKD61), D2 SS430, 431, 440C 303, 304, 316 321, 341 15-5Ph, 17-4Ph Inconel 625 Inconel 718 Inconel 718

Guide to the cutting conditions AM programming software is required to control the cycle/toolpaths, C with different information needed to suit the various conditions, such as material type. T hese cutting conditions are a guide for Dynamic & Trochoidal applications & will vary subject to the users own machine conditions & set-up variables. Careful consideration has been given to chip loads based on the step over (ae) size of cut to ensure chip thinning is eliminated, with deflection kept to a minimum.

Tool Recommended Vc (m/ min) Engagement Angle ae 300 300 300 300 250 300 300 250 250 300 250 250 250 170 120 120 70 60 60 50 40

18°

0.02x d1

18°

0.02 x d1

11°

0.01 x d1

11°

0.01 x d1

Max

6mm

8mm

10mm

12mm

16mm

20mm

0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.030 0.039 0.039 0.033 0.033 0.033 0.033 0.033

0.063 0.063 0.063 0.063 0.057 0.063 0.063 0.057 0.057 0.063 0.057 0.057 0.057 0.039 0.051 0.051 0.042 0.042 0.042 0.042 0.042

0.078 0.078 0.078 0.078 0.069 0.078 0.078 0.069 0.069 0.078 0.069 0.069 0.069 0.048 0.063 0.063 0.054 0.054 0.054 0.054 0.054

0.093 0.093 0.093 0.093 0.084 0.093 0.093 0.084 0.084 0.093 0.084 0.084 0.084 0.060 0.075 0.075 0.066 0.066 0.066 0.066 0.066

0.123 0.123 0.123 0.123 0.111 0.123 0.123 0.111 0.111 0.123 0.111 0.111 0.111 0.078 0.102 0.102 0.087 0.087 0.087 0.087 0.087

0.153 0.153 0.153 0.153 0.141 0.153 0.153 0.141 0.141 0.153 0.141 0.141 0.141 0.099 0.126 0.126 0.108 0.108 0.108 0.108 0.108

Workpiece Material • L OW MACHINABILITY / HARDER TO MACHINE = increase in process reliability •H IGH MACHINABILITY / EASY TO MACHINE = increase in productivity Machine Size • L arger Machines = high spindle torque, stable feed, ideal for medium & larger tools • S maller Machines = higher spindle speed, shorter acceleration & deceleration, ideal for small to medium tools

3323

Material

Condition

N/mm2

125 190 250 270 300 180 275 300 350 200 325 200 240 180 250 250 200 280 250 350 320

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 680 950 840 1180 1080

Common Grades 1020, S1214L 1045 1055, 1060 4140, 4340

A2, H13 (SKD61), D2 SS430, 431, 440C 303, 304, 316 321, 341 15-5Ph, 17-4Ph Inconel 625 Inconel 718 Inconel 718

Tool Recommended Vc (m/ min) Engagement Angle ae 270 270 270 270 210 270 270 210 210 270 210 210 210 150 100 100 60 50 50 40 30

53°

0.2x d1

46°

0.15 x d1

37°

0.1 x d1

31°

0.08 x d1

Max

Contents

6mm

8mm

10mm

12mm

16mm

20mm

0.044 0.044 0.044 0.044 0.042 0.044 0.044 0.042 0.042 0.044 0.042 0.042 0.042 0.039 0.048 0.048 0.045 0.045 0.045 0.045 0.045

0.070 0.070 0.070 0.070 0.063 0.070 0.070 0.063 0.063 0.070 0.063 0.063 0.063 0.054 0.063 0.063 0.060 0.060 0.060 0.060 0.060

0.088 0.088 0.088 0.088 0.081 0.088 0.088 0.081 0.081 0.088 0.081 0.081 0.081 0.066 0.081 0.081 0.075 0.075 0.075 0.075 0.075

0.106 0.106 0.106 0.106 0.096 0.106 0.106 0.096 0.096 0.106 0.096 0.096 0.096 0.081 0.096 0.096 0.090 0.090 0.090 0.090 0.090

0.140 0.140 0.140 0.140 0.129 0.140 0.140 0.129 0.129 0.140 0.129 0.129 0.129 0.105 0.129 0.129 0.120 0.120 0.120 0.120 0.120

0.176 0.176 0.176 0.176 0.159 0.176 0.176 0.159 0.159 0.176 0.159 0.159 0.159 0.132 0.162 0.162 0.150 0.150 0.150 0.150 0.150

UNIVERSAL ISO

VDI^ 3323

Material

Condition

N/mm2

125 190 250 270 300 180 275 300 350 200 325 200 240 180 250 250 200 280 250 350 320

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 680 950 840 1180 1080

Common Grades 1020, S1214L 1045 1055, 1060 4140, 4340

A2, H13 (SKD61), D2 SS430, 431, 440C 303, 304, 316 321, 341 15-5Ph, 17-4Ph Inconel 625 Inconel 718 Inconel 718

Tool Recommended Vc (m/ min) Engagement Angle ae 300 300 300 300 250 300 300 250 250 300 250 250 250 170 120 120 70 60 60 50 40

46°

0.15x d1

37°

0.10 x d1

31°

0.08 x d1

26°

0.05 x d1

Max

6mm

8mm

10mm

12mm

16mm

20mm

0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.048 0.054 0.054 0.045 0.045 0.045 0.045 0.045

0.084 0.084 0.084 0.084 0.075 0.084 0.084 0.075 0.075 0.084 0.075 0.075 0.075 0.063 0.069 0.069 0.060 0.060 0.060 0.060 0.060

0.105 0.105 0.105 0.105 0.096 0.105 0.105 0.096 0.096 0.105 0.096 0.096 0.096 0.081 0.087 0.087 0.075 0.075 0.075 0.075 0.075

0.126 0.126 0.126 0.126 0.114 0.126 0.126 0.114 0.114 0.126 0.114 0.114 0.114 0.096 0.105 0.105 0.090 0.090 0.090 0.090 0.090

0.168 0.168 0.168 0.168 0.153 0.168 0.168 0.153 0.153 0.168 0.153 0.153 0.153 0.129 0.141 0.141 0.120 0.120 0.120 0.120 0.120

0.210 0.210 0.210 0.210 0.189 0.210 0.210 0.189 0.189 0.210 0.189 0.189 0.189 0.162 0.174 0.174 0.150 0.150 0.150 0.150 0.150

Carbide Drills

VDI^

HSS Drills

ISO

ISO Taps

ROUGHING

Tool Holding

E486 & E487 Carbide, 7 & 9 Flute, R40/42 Ni, Extra Long

DIN Taps

Use the Item #  to return to product page

Material

Condition

N/mm2

125 190 250 270 300 180 275 300 350 200 325 200 240 180 250 250 200 280 250 350 320

440 640 840 910 1010 610 930 1010 1180 680 1100 680 810 610 840 840 680 950 840 1180 1080

Common Grades 1020, S1214L 1045 1055, 1060 4140, 4340

A2, H13 (SKD61), D2 SS430, 431, 440C 303, 304, 316 321, 341 15-5Ph, 17-4Ph Inconel 625 Inconel 718 Inconel 718

Tool Recommended Vc (m/ min) Engagement Angle ae 300 300 300 300 250 300 300 250 250 300 250 250 250 170 120 120 70 60 60 50 40

18°

0.02x d1

18°

0.02 x d1

11°

0.01 x d1

11°

0.01 x d1

Max

6mm

8mm

10mm

12mm

16mm

20mm

0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.030 0.039 0.039 0.033 0.033 0.033 0.033 0.033

0.063 0.063 0.063 0.063 0.057 0.063 0.063 0.057 0.057 0.063 0.057 0.057 0.057 0.039 0.051 0.051 0.042 0.042 0.042 0.042 0.042

0.078 0.078 0.078 0.078 0.069 0.078 0.078 0.069 0.069 0.078 0.069 0.069 0.069 0.048 0.063 0.063 0.054 0.054 0.054 0.054 0.054

0.093 0.093 0.093 0.093 0.084 0.093 0.093 0.084 0.084 0.093 0.084 0.084 0.084 0.060 0.075 0.075 0.066 0.066 0.066 0.066 0.066

0.123 0.123 0.123 0.123 0.111 0.123 0.123 0.111 0.111 0.123 0.111 0.111 0.111 0.078 0.102 0.102 0.087 0.087 0.087 0.087 0.087

0.153 0.153 0.153 0.153 0.141 0.153 0.153 0.141 0.141 0.153 0.141 0.141 0.141 0.099 0.126 0.126 0.108 0.108 0.108 0.108 0.108

Workpiece Clamping

Tool engagement angle

• S table = optimised metal removal rate can be achieved •U nstable = reduce feed for increased process reliability

• For Concave milling paths, engagement angle increases, therefore tool stress increases - ae & fz must be reduced by 20% • 9 0° Corner radius milling paths = tool radius, conditions affected dramatically – vc & fz must be reduced by 70%. • 9 0° Corner radius milling paths < tool radius, condition is stable ae & fz must be reduced by 30% • For Convex milling paths, engagement angle decreases, therefore tool stress decreases - ae & fz can be increased.

Tool Clamping •H A shank style = higher concentricity aids in longer tool life, but with increased pull out in extremely tough materials when heavy cuts are taken. •H B shank style = lower concentricity but eliminates pull out, ideal for larger machines & tool diameters.

HSS Endmills

3323

Reamers

VDI^

Tech Info

ISO

Carbide Endmills

FINISHING

501

Contents

Application Guide Speeds & feeds - HSS Endmills Material Group Sutton Steel N Stainless Steel VA Cast Iron GG Non-Ferrous Metals, Aluminiums & Coppers AI W Titaniums & Super Alloys Ti Ni Hard Materials (≥ 45 HRC) H

UNI

Carbide Drills

ISO VDI P A M R K F N N S S H H

^ VDI 3323 material groups can also be determined by referring to the workpiece material cross reference listing. Refer to main index of this section.

HSS Drills

Use the Item # to return to product page 

ISO Taps

ISO

Tool Holding

DIN Taps

Carbide Endmills

HSS Endmills

Reamers

VDI^ 3323

Material

Catalogue Code Material Surface Finish Sutton Designation Geometry Type of Cut: Slotting Finishing Universal Roughing Profiling  ap × Ø  ae × Ø

Condition

E179 HSS Co.8 Brt N R30

E180 HSS Co.8 TiAlN N R30

•

N/mm2 440

Vc 30

640 840 910

•

0.5 1.0

Feed # 6

Vc 36

•

0.5 1.0

Feed # 6

Vc 40

HT (Hardened & Tempered), QT (Quenched & Tempered)

Tech Info

502

Notes on Milling 1. A bove values are guidelines for the size and type of cut nominated. 2. For long series tools, reduce speed by 40% and feed by 20%.

2 3 4 5 6 8 10 12 16 20 25

E192 HSS Co.8 TiAlN N R30

•

1.5 0.1

Feed # 4

Vc 40

1.5 0.1

Feed # 5

Vc 50

•

1.5 0.1

1.5 0.25

Feed # 4

Vc 40

Feed # 5

1010

610

930

1010

1180

680

1100

680

810

610

840

3 3

840

610

880

570

840

460

780

210

360

270

320

460

390

320

360

680

950

840

1180

1080

1350

Condition: A (Annealed), AH (Age Hardened), C (Cast), Bold = Optimal | Regular = Effective

E191 HSS Co.8 Brt N R30

Feed Table (fz) (mm/tooth) Feed # 8

Contents 40

TiAlN N R30 NF (Long)

Brt NR R30 NR (Long)

•

1.5 0.25

Feed # 9

Vc 40

Feed # 9

Vc 50

Feed # 9

Vc 30

E252 SPM AlCrN VA R30 VA-R (Long)

•

1.5 0.25

1.0 0.5

Feed # 5

Vc 40

Feed # 5

Vc 70

Feed # 6

Vc 40

Feed # 4

Vc 40

Feed # 4

Ø n vc fz vf z Q ap ae

Use the Item # to return to product page

Slotting Finishing Universal Roughing Profiling  ap  ae

VDI^ 3323

1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41

ISO

HSS Drills

Carbide Drills Vc 50

E251 E255 SPM AlCrN VA R30 VA-R

ISO Taps

1.5 0.25

Feed # 9

Brt N R30 NF (Long)

E147

Tool Holding

•

TiCN NR R30 NR (Long)

E151 SPM TiAlN UNI R45 HRS

HSS Co.8

DIN Taps

Vc 40

E146

Carbide Endmills

TiAlN N R30 NF

Brt N R30 NF

E206

HSS Co.8

HSS Endmills

E205

Reamers

E202

HSS Co.8

METRIC ENDMILLS (mm size)

vc × 1000 Ø×π

vc Ø

x 318

nxØ×π nxØ 1000 318 Vf fz = z x n vf = fz x z x n vc =

ap x ae × vf 1000

Tech Info

E201

503

Contents

Application Guide Troubleshooting - HSS Drills

Carbide Drills Code

HSS Drills ISO Taps Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

504

Problem

Breaking of drill

Outer corner breaks down

Cutting edges chip

Drill splits up centre

Drill will not enter work

Hole rough

Hole oversize

Tang breaks 2

• • • • • • • • • • • • • • • • • • • • • •

• •

•

Possible Reason

Solution

Dull point

Sharpen

Drill has front taper due to wearing

Sharpen

Insufficient lip clearance on point

Grind correctly

Lip clearance too great

Regrind to correct clearance angle

Drill in incorrectly point ground

Regrind correctly

Flutes clogged with chips

Remove drill from hole and to clear flutes

Spring or backlash in drill press, fixture or work

Check each item for rigidity and alignment

Feed too heavy

Reduce Feed

Cutting speed too high

Reduce speed

Dry cutting, no lubricant at cutting edges

Apply cutting fluid

Drill web (core) diameter too big

Thin web to original size

Fixture/Clamping not rigid

Secure job firmly

Unequal angle or uneven length of cutting edges

Regrind to same lip lengths and angles

Spindle run-out/Loose spindle

Check machine

Bad fit between shank taper & socket. The drive & alignment is controlled by the taper fit

Remove dirt, nicks or burrs, or replace worn socket

Contents Carbide Drills

Application Guide Troubleshooting - Taps

Axial miscutting of thread

Thread is undersize

Thread has bellmouthed entry

Thread surface is rough and unclean

Low tool life

Partial or complete tap breakage on FORWARD or BACKWARD movement 6

• • • • • • • • •

Solution

Wrong tap, cutting geometry of the tap is not suitable for this operation

Use correct tap for the material group (see Expert Tool System, at www.suttontools.com) Tap hole diameter should be in accordance to DIN336 or respective standard. For cold forming taps, a special hole diameter is needed. a) check workpiece clamping b) check machine settings a) use mechanical feed b) use tap holder with length compensation a) use a new tap b) improve and check lubrication c) remove cold welding area from tap d) use tap with surface treatment or coatings a) use mechanical feed b) use tap that has better guiding characteristics a) improve lubrication b) lower speed a) use tap with different flute form b) use coated taps c) use tap set Make sure that the coolant is correct and that the supply is sufficient Spiral fluted taps should only be lightly pushed into the tap hole until it begins to cut. The tap holder should immediately begin to apply tension to the tap. Spiral pointed taps and even left hand spiral flute taps must have a stronger pressure until they begin to cut. The tap holder should immediately begin to apply pressure to the tap (pushing force)

Tap hole diameter is undersize Misalignment - tap hole position, or angle is not correct The axial machine spindle movement is not free and easy Cold welding on the thread flanks of the tap Poor guidance of the tap because of little thread depth

• • • • • •

•

Speed is too high Chip clogging The lubrication wrong, additives or the coolant supply is not sufficient Spiral fluted taps are over pressured in the initial cutting phase (retracting pulling force)

• •

Possible reason

Spiral pointed taps (gun taps) are not receiving enough pressure in the initial cutting phase

• •

Tolerance on the tap is not identical to the tolerance on the drawing or on the gauge Wrong initial cutting pressure has been used or the machine spindle is not moving along its axis free and easy Tap is over loaded, either from coarse pitch and/or tough material

• • •

Cold welding, material build-up (pick-up)

• • • • •

Hardened walls in drilled hole

Over loading of teeth in the chamfer area

ISO Taps

Tool Holding

DIN Taps

Carbide Endmills

HSS Drills

Thread is oversize

Use a tap which has a correct tolerance a) use mechanical feed b) use tap holder with length compensation Use set of taps a) improve coolant supply, use taps with surface treatments or coatings b) check if surface treatment is correct for this application a) use drill best suited to material being drilled b) use new drill or boring tool c) resharpen drilling or boring tools d) if possible, heat treatment and coatings should only be made after threading a) use a longer chamfer (check if the tap hole is blind hole or through) b) use increased number of teeth in the chamfer area by selecting tap with increased number of flutes

Tap hole chamfer is missing or wrong

Countersink tap hole chamfer with correct angle

Tap crashed against the bottom of tap hole

Use tap holder with length compensation and over load clutch

HSS Endmills

• • • • • • • • •

Reamers

Problem

Tech Info

Code

505

Contents

Application Guide Troubleshooting - Endmills

Carbide Drills HSS Drills ISO Taps 1

Tool Holding DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

506

Code

Problem

Possible Reason

Poor workpiece finish

Cutting edge wear, cutter radial run-out

Splintering of workpiece edge

Unsuitable cutting conditions, unsuitable shape of cutting edge

Non-parallel or uneven surface

Low stiffness of the cutter or of the workpiece (loose)

Extreme flank wear

Extreme crater wear

Breaks and shelling due to thermal shock

Formation of built-up edges

Poor chip clearance, chip blockage

Lack of Rigidity

Difficult cutting conditions, clamping of the workpiece

End mill cutter breaks

Unsuitable cutting conditions, flute length of the cutter

•

• •

• • • • • • •

• •

• • • • • • • • • •

• • • • • • • • •

Unsuitable cutting conditions, unsuitable shape of cutting edge

• •

Solution increase cutting speed

•

• • • • • • • • • • • • • • • • • • •

reduce cutting speed increase feed rate reduce feed rate reduce cutting depth change cutter diameter and cut width check use of cooling lubricant, flush swarf away increase clearance angle (Radial relief) increase wedge angle (Rake angle) increase number of teeth

• • • •

reduce number of teeth select larger chip space (Cutter) change shape of minor cutting edge cutter - change radial run-out

• • •

change cutter stiffness, flue length (l/D ratio) select machine with higher power and stiffness

Contents Carbide Drills

Application Guide Troubleshooting - Reamers

Breakage

Excessive wear

Chattering

Poor surface finish

clean spindle

Misalignment of two or more parts of the set-up. This condition can cause a bell-mouthed hole

align holes or use bridge style reamer

Too fast or too slow speeds

adjust

Too much or too little feed

adjust

Wrong type of coolant

refer to lubricant supplier’s literature

No lubricant between guide bushing and reamer

apply

Lack of lubricant

increase

Bottoming in blind holes

reduce depth travel of reamer

Lack of sufficient stock to ream

drill smaller hole

Too much stock to ream

drill larger hole

Entering work too fast

slow down the approach feed, until all cutting edges are located in the hole

Badly drilled holes – too rough, tapered or bell-mouthed. Bellmouthed holes may cause the reamer to wedge rather than cut

replace drill

Oversize or undersize bushings

use suitable bush

Lack of rigidity in machine or work holder

improve rigidity

Improperly designed reamer for the job

use a different reamer

ISO Taps

Dirt or burrs in spindle or socket in which reamer is held

Tool Holding

Solution

DIN Taps

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Possible reason

Carbide Endmills

HSS Endmills

Reamers

HSS Drills

Problem

Tech Info

Code

507

Contents

Technical Information Coatings & Surface Finish

Carbide Drills HSS Drills

Trade Name

Coating

Coating Structure

Microhardness

Thermal Stability

Alcrona (AlCrN)

Aluminium Chromium Nitride

Coeff. of Friction vs Steel

Mono Layer

3200 HV

0.35

up to 2012°F

Blue - Grey • Hardened steels up to 54 HRC

Aldura

TiAlN + AlCrN

Multi Layer

3300 HV

<0.4

>1100°C

Blue - Grey

• High speed machining • Suitable for minimum quantity lubrication (MQL) and dry machining • Machining of hardened steels (>60HRC) • Ideal for carbide tools

AlNova

Alcrona based

Multi Layer

3200 HV

0.35

>1100°C

Light Grey

• Even high thermal stresses hardly effect the superior hardness of the coating • I ts high hot hardness results in excellent abrasion resistance even at high cutting speeds

Application and Benefits • L ow alloy steels and high tensile steels • Ideal for carbide tools

ISO Taps

• For ferrous metals • Prevents chip build-up on the cutting edges, Blue - Black especially in low carbon steels • Oxide layer protects surface • Good carrier of lubricants

Tool Holding

Blu

Steam Oxide

0.8 – 1.0

Brt

0.8 – 1.0

CrN

Chromium Nitride

Gradient Coating

1750 HV

0.5

up to 1292°F

Silver - Grey • Excellent corrosion resistance

Titanium Futura Nano Aluminium (TiAlN) Nitride

Nano Layer

3300 HV

0.3 – 0.35

up to 1652°F

ifficult to machine materials, such as stainless steel Violet - Grey •• D Higher speeds and feeds

Hardlube DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

508

Colour

TiAlN + WC/C

Nano Layer

3000 HV

0.15 – 0.20

up to 1472°F

• For general purpose applications • Cutting and forming of copper, nickel, and monel metal • Enhanced thermal stability and oxidation resistance • L ow internal stress of coating results in excellent adhesion under high loads • A brasive materials – cast iron and heat treated steel • Reduces or eliminates use of coolants

Dark Grey

• E xcellent friction and lubricating properties of the coating provide optimal chip flow • Tapping and drilling of hard to machine materials • Suitable for minimum quantity lubrication (MQL) and dry machining • L onger tool life • Higher cutting speeds and feeds • Superb chip evacuation • Greater number of regrinds • Improved drill hole quality • Excellent performance in abrasive material

Helica

Alcrona based

Multi Layer

3000 HV

0.25

up to 1100°C

Copper

Plasma Nitride

0.8 – 1.0

Pertura

AlTiN

Nano Layer

3300 HV

0.3

1000 deg C

• Increases surface hardness • Better lubricant carrying properties • A brasive materials – cast iron and aluminium alloys • Versatile application in high end drilling

tool lifetimes Aubergine - •• High Trouble-free chip transport Grey • Reduction of cutting forces

• Extremely high service life, even with deep-hole and dry drilling • High performance applications

up to 752°F

to machine materials Blue - Grey •• Difficult brasive materials - cast iron and aluminium alloys A

up to 1112°F

range of materials Gold - Yellow •• Wide 3 to 8 times longer tool life than uncoated tools

TiCN

Titanium Carbonitride

Gradient Coating

3000 HV

TiN

Titanium Nitride

Mono Layer

2300 HV

TiSiN

TiSi based

Multi Layer

3600 HV

0.3

<1200°C

Copper

• Suitable for high speed (wet / dry) and hard machining for difficult materials above 52 HRC. • Suitable for high speed machining with hardened steels above 60 HRC to maximum of 63 HRC • Vc and Vf = +50%

Xceed

AlTiN

Nano Layer

3300 HV

0.4

up to 900°C

Blue - Grey

• Hard materials • Difficult to machine materials, eg. Ti alloys, Inconel • High speeds and feeds • Dry or MQL machining • Machining of hardened steels (>52HRC)

0.4

Latest advances in thin film coatings to optimise your machining application

• Adhesive materials - copper and copper based alloys • General purpose use

• Higher tool speeds and feeds than uncoated tools

Contents Carbide Drills

Technical Information Materials - Tool

Standard tool material for most common applications

Used for the manufacturing of cutting tools such as twist drills, endmills and taps.

5% cobalt grade of high speed steel

High-heat resistance, especially suited for roughing or when coolant insufficient

Cobalt alloyed, tungsten-molybdenum high speed steel possessing high hardness, excellent cutting properties, high-red hardness and good toughness.

8% cobalt grade of high speed steel

Increased heat resistance and hardness, suitable for difficult-to-machine materials

Available for applications that require a strong resistance to softening at elevated cutting temperatures. The ability of the steel to maintain its “redhot hardness” is provided by the addition of cobalt. The high hot hardness is required for machining difficult materials such as nickel-base, titanium and highly alloyed steel.

HSSE

Premium grade of high speed steel

Wide range of machine taps

Vanadium grade gives high wear resistance and toughness for most tapping applications.

PM-HSSE V3

Powdered metallurgy vanadium grade of high speed steel

Materials with hardness up to 40 HRC Difficult-to-machine materials eg. stainless steels

PM-HSS V3 for higher performance tools, incorporates very fine and uniform grain structure allowing a high hardness to be achieved, whilst maintaining good toughness.

Powdered metallurgy - 8% Cobalt grade of high speed steel

Materials with hardness up to 45 HRC

The addition of cobalt provides this material with the ability to maintain its strength and hardness level when exposed to extremely high cutting temperatures. This makes PM-HSS Co suitable for heavy duty tapping, in materials such as high alloyed steels to non-ferrous metals like Ni-base alloys & Ti-alloys.

Powdered metallurgy - 11% Cobalt grade of high speed steel

Special applications, requiring very high edge hardness. Cutting tools with the appropriate geometry can be applied to workpiece materials with hardness up to 55 HRC

An excellent bridge material between high speed steel and carbide. SPM offers very high red hardness, wear resistance and the highest compressive strength of any high speed steel.

VHM

Sub-micron grade of solid Carbide (ISO K15-K30)

Tapping hardened steel

Ultra fine grain type (0.8µm) with maximum toughness & high hardness, therefore especially recommended for rotating tools to machine hardened parts.

VHM

Sub-micron grade of solid Carbide (ISO K40)

Sutton standard grade for endmills & drills

Ultra fine grain type (0.6µm) offers the ideal combination of hardness & toughness for high performance drilling & general milling applications

VHM-ULTRA

Sub-micron grade of solid Carbide (ISO K40-K50)

High performance grade for endmills

Ultra fine grain type (0.5µm) offers the best wear resistance for high performance milling applications.

HSS Co

HSSE Co 8%

PM-HSS Co

SPM

ISO Taps

Conventional high speed steel

HSS

HSS Drills

Description

Tool Holding

Application

DIN Taps

Type

Carbide Endmills

Abbreviations

Tech Info

Reamers

HSS Endmills

Computer controlled vacuum heat treatment ensures consistent high quality

509

Contents

Technical Information Conversion Tables

Carbide Drills HSS Drills ISO Taps

Metric Imperial

Inch

0.010 0.100 0.150

0.0059

1.191

0.160

0.0063

1.321

0.0520

0.170

0.0067

1.397

0.0550

0.180

0.0071

1.500

0.0591

0.190

0.0075

1.511

0.0595

0.200

0.0079

1.588

0.210

0.0083

1.613

0.0635

0.220

0.0087

1.702

0.0670

0.230

0.0091

1.778

0.240

0.0094

1.854

0.254

0.0100

1.900

0.0748

0.270

0.0106

1.930

0.280

0.0110

1.984

Metric Imperial

Inch

Gauge

0.0004

1.092

0.0430

0.0039

1.181

0.0465

3/64

1/16

3.912

0.1540

3.969

5/32

0.1563 22

0.1590

0.1610

4.100

0.1614

0.0700

4.200

0.1654

0.0730

4.216

0.1660

4.300

0.1693

0.0781

Tool Holding

0.0810

2.083

0.0820

0.0130

2.184

0.343

0.0135

0.368

0.0145

1/64

4.089

2.057

0.330

0.1535

4.039

0.0125

0.1520

3.900

0.0625

0.0120

0.317

0.1496

3.861

0.1575

0.0787

0.305

3.800

0.1570

0.0785

0.0118

Gauge

4.000

1.994

0.0114

Inch

3.988

0.0760 5/64

Metric Imperial

0.0469

2.000

0.290 0.300

4.305 4.366

0.1695 11/64

19 18

0.1719 17

4.394

0.1730

4.400

0.1732

4.496

0.1770

4.500

0.1772

0.0860

4.572

0.1800

2.261

0.0890

4.600

0.1811

2.375

0.0935

4.623

0.1820

4.700

0.1850

3/32

0.0938

16 15

0.0156

2.381

0.400

0.0157

2.438

0.0960

4.762

0.406

0.0160

2.489

0.0980

4.800

0.1890

2.500

0.0984

4.851

0.1910

2.527

0.0995

4.900

0.1929

0.397

DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

510

Gauge

3/16

0.1875

0.457

0.0180

0.500

0.0197

0.508

0.0200

2.578

0.1015

4.915

0.1935

0.533

0.0210

2.642

0.1040

4.978

0.1960

0.572

0.0225

2.705

0.1065

5.000

0.1969

0.600

0.0236

5.055

0.1990

0.610

0.0240

2.794

0.1100

5.100

0.2008

0.635

0.0250

2.819

0.1110

5.105

0.660

0.0260

2.870

0.1130

5.159

0.700

0.0276

2.946

0.1160

5.182

0.2040

0.711

0.0280

3.000

0.1181

5.200

0.2047

0.742

0.0292

3.048

0.1200

5.220

0.2055

0.787

0.0310

3.100

0.1220

5.300

0.2087

1/32

2.778

7/64

1/8

0.1094

0.2010 13/64

0.0313

3.175

0.1250

5.309

0.2090

0.0315

3.200

0.1260

5.400

0.2126

0.813

0.0320

3.264

0.1285

5.410

0.2130

0.838

0.0330

3.300

0.1299

5.500

0.889

0.0350

3.400

0.1339

5.556

0.900

0.0354

3.454

0.1360

0.914

0.0360

3.500

0.1378

0.940

0.0370

3.569

0.1405

0.965

0.0380

3.572

0.991

0.0390

3.600

1.000

0.0394

3.658

0.1440

1.016

0.0400

3.700

0.1457

1.041

0.0410

3.734

0.1470

5.953

1.067

0.0420

3.797

0.1495

6.000

9/64

5 4 3

0.2188 0.2205

5.613

0.2210

5.700

0.2244

0.1406

5.791

0.2280

0.1417

5.800

0.2283

5.900

0.2323

0.2165 7/32

5.600

0.2031

0.800

0.794

5.944

0.2340 15/64

0.2344 0.2362

2 1

0.2441

6.248

0.2460

6.300

0.2480

6.350

1/4

0.2500

C D E

Contents 0.3504

15.500

0.3543

15.875

9.093

0.3580

9.100

0.3583

16.272

23/64

0.3594

16.500

0.3622

16.669

9.300

0.3661

17.000

0.6693 0.6719 0.6875

0.3740

17.500

9.400

6.528

0.2570

9.500

6.600

0.2598

6.629

0.2610

6.700

17.859

0.3750 V

0.6890 45/64

18.000

9.576

0.3770

0.2638

9.600

0.3780

18.256

0.2656

9.700

0.3819

18.500

9.800

0.3858

18.653

0.6563

11/16

0.2559

17/64

0.6496 21/32

17.462

6.500

6.747

0.6406

0.3701

0.3680

3/8

0.6299 41/64

43/64

9.347

9.525

0.6250

17.066

0.2520

0.6102 5/8

16.000

9.200

9.128

6.400

0.7031 0.7087

23/32

0.7188 0.7283

47/64

0.7344

6.756

0.2660

6.800

0.2677

9.804

0.3860

6.900

0.2717

9.900

0.3898

19.050

3/4

0.7500

6.909

0.2720

0.3906

19.447

49/64

0.7656

7.000

0.2756

10.000

0.3937

19.500

7.036

0.2770

10.084

0.3970

7.100

0.2795

10.200

0.4016

7.137

0.2810

10.262

0.4040

9/32

I J K

9.922

25/64

13/32

19.000

19.844

20.241

7.200

0.2835

10.490

0.4130

7.300

0.2874

10.500

0.4134

21.000

7.366

0.2900

7.400

0.2913

7.493

0.2950

7.500

0.2953

11.112

0.2969

7.600

0.2992

7.671

0.3020

7.700

0.3031

11.800

7.800

0.3071

11.906

7.900

0.3110 0.3125

7.541

7.938

19/64

5/16

0.4063 Z

20.638

0.7969 0.8071

13/16

0.8125 0.8268

21.034

53/64

0.8281

0.4252

21.431

27/32

0.8438

11.000

0.4331

21.500

0.4375

21.828

11.200

0.4409

22.000

11.500

0.4528

22.225

0.4531

22.500

0.4646

22.622

0.4688

23.000

12.000

0.4724

23.019

29/32

0.9063

12.200

0.4803

23.416

59/64

0.9219

0.4844

23.500

0.4921

23.812

0.5000

24.000

11.509

7/16

29/64 15/32

31/64

0.3150

8.026

0.3160

8.100

0.3189

12.700

8.200

0.3228

12.800

0.5039

24.209

8.204

0.3230

13.000

0.5118

24.500

12.303

0.7874 51/64

0.4219

8.000

0.7813

10.800

10.716

27/64

0.7677 25/32

20.500

10.319

0.7480

20.000

0.2813

7.144

12.500 1/2

0.8465 55/64

0.8594 0.8661

7/8

0.8750 0.8858

57/64

0.8906 0.9055

0.9252 15/16

0.9375 0.9449

61/64

0.9531 0.9646

0.3268

13.097

33/64

0.5156

24.606

0.3281

13.494

17/32

0.5313

25.000

8.400

0.3307

13.500

0.5315

25.003

63/64

0.9844

8.433

0.3320

0.5469

25.400

1.0000

8.500

0.3346

14.000

8.600

0.3386

14.288

8.611

0.3390

8.700

0.3425

14.684

0.3438

15.000

8.800

0.3465

15.081

19/32

0.5938

8.839

0.3480

15.478

39/64

0.6094

8.300 8.334

8.731

21/64

11/32

13.891

35/64

0.5512 9/16

14.500

0.5625

Gauge

HSS Drills

0.2420

6.200

8.900 9.000

Inch

ISO Taps

6.147

Metric Imperial

Tool Holding

0.2402

Gauge

DIN Taps

0.2380

6.100

Inch

31/32

Carbide Endmills

6.045

Metric Imperial

HSS Endmills

Gauge

0.9688 0.9843

Reamers

Inch

0.5709 37/64

0.5781 0.5906

Tech Info

Metric Imperial

Carbide Drills

Technical Information Conversion Tables

511

Contents

Technical Information Useful Tables

Carbide Drills

Tensile Strength vs Hardness (≈) Tensile Strength N/mm

Tons/Inch

Brinell [HB]

Rockwell [HRC (HRB)]

HSS Drills

400

40.8

26.0

119

69 HRB

450

45.9

29.0

133

75 HRB

500

50.1

32.4

149

81 HRB

550

56.0

35.6

163

85.5 HRB

600

61.0

38.9

178

89 HRB

650

66.2

42.1

193

92 HRB

700

71.4

45.3

208

95 HRB

ISO Taps Tool Holding DIN Taps

750

76.5

48.5

221

97 HRB

800

81.6

51.8

238

22 HRC

850

86.7

55.1

252

25 HRC

900

91.8

58.3

266

27 HRC

1000

102.0

64.7

296

31 HRC

1100

112.2

71.2

325

35 HRC

1200

122.4

77.7

354

38 HRC

1300

132.6

84.1

383

41 HRC

1400

142.8

90.5

408

44 HRC

1500

152.9

97.0

444

47 HRC

1600

163.1

103.5

461

49 HRC

1700

173.3

109.9

477

50 HRC

1800

183.5

116.4

514

52 HRC

1900

193.7

122.9

549

54 HRC

2000

203.9

129.3

584

56 HRC

2100

214.1

135.8

607

57 HRC

2200

224.3

142.2

622

58 HRC

2300

233.1

148.7

653

60 HRC

Carbide Endmills

Conversion of values depends on the actual alloy content; this chart therefore indicates a general conversion only.

Manufacturing Tolerances

HSS Endmills

Nominal Diameter in mm above

up to and including

3 6 10

Reamers

18 30 50

Tech Info

512

Hardness

Kg/mm

6 10 18 30 50 80 120

Tolerance Grade in Microns e8

1 Micron = 0.001mm h10

js12

js14

k10

m7 +12

-14

+50

+125

+14

+25

+40

-18

-4

-6

-10

-14

-25

-40

-50

-125

-20

+60

+150

+18

+30

+48

+16

-38

-5

-8

-12

-18

-30

-48

-60

-150

-25

+75

+180

+22

+36

+58

+21

-47

-6

-9

-15

-22

-36

-58

-75

-180

-32

+90

+215

+27

+43

+70

+25

-59

-8

-11

-18

-27

-43

-70

-90

-215

-40

+105

+260

+33

+52

+84

+29

-73

-9

-13

-21

-33

-52

-84

-105

-260

-50

+125

+310

+39

+62

+100

+34

-89

-11

-16

-25

-39

-62

-100

-125

-310

-60

+150

+370

+46

+74

+120

+41

-106

-13

-19

-30

-46

-74

-120

-150

-370

+11

-72

+175

+435

+54

+87

+140

+48

-126

-15

-22

-35

-54

-87

-140

-175

-435

+13

Conversion: 1 micron equals .00004 inches

Contents Carbide Drills

Technical Information Shank Designs - HSS

High Speed Steel Straight Shanks DIN 1835 d1 h6

l1 +2 -0

d1 h6

l1 +2 -0

HSS Drills

Form A (plain)

chamfer

Form B (with drive flat) h13

l1 +2 -0

l2 +1 -0

4.2

4.8

5.5

6.6

8.4

22.5

10.4

14.2

18.2

47.8

60.8

centre hole

chamfer

DIN Taps

centre hole Carbide Endmills

c1 0 -1

chamfer

Form D (screwed shank) l1 +2 -0

l3 +1 -0

d2 1.27 / 20TPI

5.9

9.9

11.9

15.9

19.9

24.9

31.9

1.27 / 20TPI

Reamers

HSS Endmills

b1 +0.05 -0

thread undercut or thread runout released

centering hole

thread profile DIN ISO 228 Whitworth Form

Tech Info

Tool Holding

ISO Taps

centre hole

513

Form HA (plain) HSS Drills

l1 +2 -0

d1 h6

l1 +2 -0

ISO Taps

d1 h6

chamfer

Tool Holding

Form HB (with drive flat) h6

b1 +0.05 -0

c1 0 -1

DIN Taps Carbide Endmills

h11

l1 +2 -0

l2 +1 -0

4.2

5.1

5.5

6.9

8.5

22.5

10.4

22.5

12.7

14.2

1.27 / 20TPI

16.2

18.2

1.27 / 20TPI

6mm to 20mm = One Drive Flat 25mm & 32mm = Two Drive Flats

chamfer

Form HE (with whistle notch flat) d1

HSS Endmills Reamers Tech Info

514

DIN6535

h6 6

h11 4.3

5.1

l1 +2 0

l4 0 -1

5.5

6.9

7.1

8.5

8.2

10.4

22.5

8.1

12.7

22.5

10.1

14.2

10.8

16.2

11.4

18.2

13.6

9.3

24.1

15.5

9.3

31.2

6mm to 20mm = One Drive Flat 25mm & 32mm = Two Drive Flats

l5 6

47º 2º

43º

(b2)

d1 chamfer Chamfer

(b3 )

(h3)

Carbide Drills

Carbide Straight Shanks

Contents

Technical Information Shank Designs - Carbide

Other dimensions and date as for figure 4

Contents Carbide Drills

Drill Definitions

drill diameter point angle clearance diameter

lip relief angle neck

chisel edge angle

helix angle

shank diameter lip

flute length shank length

margin lip

body

chisel edge

width of land

web

ISO Taps

tang

tang drive

HSS Drills

fluted land

overall length

Tool Holding

*Drills manufactured to ANSI B94-11. The overall length and flute length are measured to the corner of the outer lip.

Drill Point Types (DIN1412) Type B thinned chisel edge with corrected cutting lips

Type D point ground for cast iron

Type E brad point

Type C split point

Carbide Endmills

DIN Taps

Type A WEBchisel THINNED thinned edge

Diameter Tolerance h8 (mm)

Over

Inclusive

Plus (+)

Minus (-)

0.20

3.00

0.000

0.014

0.000

0.008

3.00

6.00

0.000

0.018

0.002

0.008

6.00

10.00

0.000

0.022

0.002

0.009

10.00

18.00

0.000

0.027

0.003

0.011

18.00

30.00

0.000

0.033

0.004

0.015

30.00

50.00

0.000

0.039

0.004

0.015

† The Drill diameter usually reduces towards the shank end; tolerance per 10mm of flute length.

Back Taper (mm) (Tapering of Diameter)†

Reamers

Drill Diameter at Point (mm)

HSS Endmills

Drill Tolerances DIN / ISO 286, Part 2

Tech Info

DNED

Technical Information Drill Terminology

515

Contents

Technical Information Hints on Use & Maintenance

Carbide Drills

Web Thinning

HSS Drills

On most drills the web increases in thickness towards the shank with the result that, as the drill is shortened by repeated sharpening, the chisel edge will become wider. As the chisel edge does not cut but forces the metal out of the way, too wide a chisel edge will result in more pressure required for penetration, leading to greater heat generation and a resultant loss of life. hold HOLDoriginal ORIGINAL THICKNESS thickness

ISO Taps

Cutting Fluids Tool Holding

The use of cutting fluids is an advantage in most drilling operations and an essential in some. The two main functions of the cutting fluid are lubrication and cooling. The purpose of lubrication is to reduce friction by lubricating the surfaces tool and work, to facilitate easier sliding of the chips up the flute and to prevent the chips welding to the cutting edges. In production work, particularly when drilling deep holes, the cooling action of the fluid is often more important than the lubrication. Overheating will shorten the life of the drill. Intermittent feed on deep holes, where possible, not only clears the chips but permits more effective cooling.

Speeds

DIN Taps

The speed of a drill is the rate at which the periphery of the drill moves in relation to the work being drilled. As a rule, with a drill working within its speed range for a specific material, more holes between sharpenings will be achieved if the speed is reduced and less holes if the speed is increased. Thus, for each production run, a speed must be established which will result in the highest rate of production without excessive breakdown time or drill usage. The factors governing speed are: component material, hardness of material, depth of hole, quality required, condition of drilling machine, efficiency of cutting fluid.

Feeds The feed of the drill is governed by the drill size and the component material. As with speeds, an increase in feed will lessen the number of holes produced sharpening but it is essential that a constant feed be maintained. If a drill is allowed to dwell, breakdown of the cutting edges will result.

Carbide Endmills HSS Endmills Reamers Tech Info

516

Small Drill Feeds and Speeds

Breakdown of small drills can most often be attributed to two faults: speed too high and feed too low. A feed which will produce CHIPS not POWDER, coupled with a speed compatible with the strength of the drill is essential for small hole drilling. Feeds must be based on thickness of chip, not mm/min, and speeds adjusted accordingly. EXAMPLE: A 1mm drill is to operate at a feed of 0.013mm /rev, drilling steel. While the material may permit a speed of 30m/min or 9,500 RPM it is obvious that the drill could not withstand a load of 0.013mm feed at this speed; a penetration rate of 124mm/min. The correct procedure is to retain the feed but reduce the speed to obtain a penetration within the capacity of the strength of the drill.

Deep Hole Drilling

When drilling deep holes, speeds and feeds should be reduced as follows:

Depth of hole

Reduction percent % Speed

Feed

3 times drill diameter

4 times drill diameter

5 times drill diameter

35 to 40

6 to 8 times drill diameter

Contents Carbide Drills

Technical Information Tap Terminology

overall length length of shank

length of square

threaded length chamfer pitch lead length

HSS Drills

Tap Definitions

lead angle square size minor diameter

root

pitch diameter

major diameter

ISO Taps

shank diameter

crest front flank

rear flank included angle of thread

width of land

shear angle

Tool Holding

semi-angle of thread

cutting face

web diameter

DIN Taps

Gun nose (spiral point)

concentric land

Section A-A

Eccentric threads (relieved to cutting edge)

Con-eccentric threads (relieved to a land)

land

tangential hook chordal hook angle

heel

negative rake angle Negative rake

positive rake angle Radial rake

Positive rake

Hook

Reamers

Cutting Faces

radial relief

Tech Info

Concentric threads (no radial relief)

radial relief

HSS Endmills

Thread Relief Types

Carbide Endmills

flute

517

Contents

Technical Information Taps

Carbide Drills

Construction dimensions / designs

Style 1 d2

Style HSS Drills

Short Machine & Hand Taps

Standard

ISO 529 JIS (J TYPE)

Style 2 d2

DIN371 l2

ISO Taps

l Machine Nut Taps l1

Style 2

l Pipe Taps 3

Tool Holding DIN Taps Carbide Endmills

Style 5

Style 4 Style 2

l2 l2

sq sq

l1l1

d2d2

l2 l2

Style 6 Style 4

dd2 2

Table below is in accordance with ISO8830 / DIN2197 sq

Terminology

Style 6 Style 4

Form

HSS Endmills

6 to 8

d2 d2

l2l2

INTERMEDIATE Style 5

sq Number of threads on lead

TAPER

l1l1

sq sq

l2l2

Chamfer angle (≈)

ll Type of flute 1

Style 5

5° l3

Hand or d2 straight flutes

8°

Hand or straight

Style 5

sq sq

4 Lobel

Main area of application

Reamers

1.5 to 2

sq l1

INTERMEDIATE

Style 6

Tech Info

* Use of this type is not recommended

Hand or straight flutes

lIllustration 1

Style 6

Generally for through holes

Blind holes with very short thread runout

3.5 to 5

10°

Straight, with spiral point

Through holes in medium & long chipping materials

2 to 3

15°

Spiral fluted

Generally for blind holes

BOTTOMING l

23°

Short through holes

Style 6 d2

3 Lobe sq sq

ll11

3 Lobe

3.5 to 5

BOTTOMING

d2 d2

ll2 2

sq sq

l1 l1

sq sq

l1 l1

sq sq

4 Lob

dd2 2

d d2

Style 3 Chamfer Type / Length l2 l2

l2 l2

3 Lobe

sq sq

l1 l1

Style 6 Style 4

dd2 2

l1 l1

dd2 2

Style 5 Style 3 l3 4 Lobe

3 Lobe

sq sq

l2 l2

sq sq

Style 5 Style 3 l3

l2 l2

Style 4 Style 2

l1l1

l2l2

Style24 Style

ll11

l2l2

d d2 2

sq sq

ll22

Style 3 Style 1

d2 d2

Style 3 1 Rc(BSPT), G (BSPF), RpStyle (BSPPL) - ISO2284 Standard NPT, NPTF, NPSF - ANSI B949 Standard dd

Tap Styles

Style 3 Style 1

ANSI sqB949 Standard l

DIN374 / DIN376 /Style DIN5156 2

Reduced Shank Taps Style 1

Style 1

Reinforced Shank Taps

518

Illustration

sq l1

4 Lob

Contents Carbide Drills

Technical Information Taps

Tap Types - Helix direction/ Helical pitch / Fluteless The helix angle depends primarily upon the hole form, eg. Through hole , blind hole, deep blind hole, etc., but the material, eg short chips, long chips, also has a strong influence on the direction of the helix. The following basic forms have derived during the development of taps:

Illustration

1 Straight Flutes (Hand) - Suitable for through or blind holes. The flutes only have room for a small amount of chips. The chips are not transported axially. Therefore, it is not advisable to cut deep through or blind holes (except in short chipping materials), with this type.

HSS Drills

Description

2 Straight Flutes with (Gun) – Suitable for through holes, the gun point curls the chip forward ahead of the tap & out of the hole. Therefore, chip clogging is avoided and coolant can flow without problems.

< 1.5xD

ISO Taps

3 Spiral Flutes (LH Spiral, right hand cutting) – Suitable for interrupted through holes, where cross-holes exist. The direction of the flutes, curls & transports the chips forward of the tap, similar to Gun taps (also, opposite to RH spiral flutes). However, in applications where another hole intersects with the tapped hole, the helical flutes maintain the pitching of the thread.

1.5 x D in depth. This particular tap design has no advantages for soft, and long chipping materials, especially D over 1.5 x d1 in depth. Due to the slow helix angle not transporting the chips well, clogging is possible. 5 40° to 50° Spiral Flutes (RH Spiral) – Suitable for blind holes, best suited to long chipping materials,

the high helix angle & the direction of the flutes, curls & transports the chips back out of the hole. This particular tap style is required to cut on reversal; therefore flute rake is required on the both front & back flute faces. D

> 1.5xD < 1.5xD

6 Thredflo/Roll taps (fluteless) - Suitable for blind & through holes. This type of tap internally rolls a thread, therefore displacing the metal rather than cutting, like the above mentioned styles. Due to torque generated when producing roll threads, much higher machine power is required. Roll threads also produce D much stronger threads than cut threads, as the grain structure of the thread remains uniform through the thread form profile. Note! Tapping drill size is not the same as a cut thread tap. D

DIN Taps

The above basic tool types are available in different variations, which have been designed & developed in respect to the specific materials and working conditions.

Tool Holding

4 15° Spiral Flutes (RH Spiral) – Suitable for blind holes, best suited to tough short chipping materials, up to

> 1.5xD

< 1.5xD

Tap Hole Types Through Holes 1

Upto up to1xD 1xD (eg. nut) (e.g. nutter)

< 1.5xD

Carbide Endmills

thread exits one-sided

HSS Endmills

> 1.5xD

thread exits Thread exit one-sided one side

Blind HolesD 4

D D

> 1.5xD

Reamers

Upto 1xD (eg. nut)

For blind holes, there are generally two thread runout forms used at the bottom of the tap hole. One form has a recessed diameter at the bottom of D the hole, and the other form has a standard runout. Other types of holes are D respective to construction designs, eg. D

thread exits one-sided

Upto 1xD (eg. nut)

a) The bore is smaller than the tap hole diameter (typical for pipes) b) As step hole, where the following diameter (second step), is smaller than the tap hole diameter. D

Tech Info

thread exits one-sided

519

Contents

Technical Information Tap Geometry

Carbide Drills

Geometry Sutton Designation

HSS Drills ISO Taps Tool Holding

Tap geometry

Surface

For cast iron – iron is a very abrasive material, therefore to increase tool life the taps are always surface treated or coated to resist the abrasion. The thread limit for this range is 6HX, which is high limit of the 6H tolerance allowing for longer wear life.

Straight flutes with low rake angle

TiCN Plasma Nitride Ni

For normal, general purpose type materials – suited to a wide range of materials, with normal rakes & relief’s. This is existing geometry that Sutton Tools has historically manufactured.

Normal rake angle & normal thread relief

Bright Blu TiN

UNI

For normal, general purpose type materials – suited to a wide range of materials, with normal rakes & high relief’s. However tap material is powder metal high speed steel (PMHSS), which due to its finer grain structure than that of conventional HSS, higher hardness can be achieved with excellent toughness, along with TiAlN surface coating allowing for better tool life than normal taps.

Normal rake angle & high thread relief

Bright TiAlN

For stainless and tough steels – to avoid clogging in tough, long chipping materials such as stainless steel, it is essential that the chip flows continuously in an axial direction. Best suited to rigid tapping applications due to high thread relief. TiCN & TiN coating has proven to be best suited for these materials.

High rake angle & thread relief

TiCN Blu

VAPM

For stainless and tough steels – geometry similar to VA range, however tap material is powder metal high speed steel (PMHSS), which due to its finer grain structure than that of conventional HSS, higher hardness can be achieved with excellent toughness, allowing for better tool life than VA taps.

High rake angle & thread relief

TiCN

For hard materials forming short chips – the low rakes & relief’s combined with a hard surface coating, allow excellent tool life.

Low rake angle & thread relief

TiCN

For soft materials – due to the very high rake angle with a low thread relief, allows for excellent chip flow & gauging in soft materials.

High rake angle & low thread relief

Bright CrN

For malleable aluminium with long chips – to avoid clogging when threading in aluminium which forms long chips, it is essential that the chip flows continuously in an axial direction. Generally these taps have 1 less flute than normal taps & therefore have larger flute space, which more adequate for large volumes of chips to help avoid clogging.

High rake angle, high helix, 2 flutes, low thread relief

Bright Plasma Nitride

DIN Taps Carbide Endmills HSS Endmills Reamers Tech Info

520

Description

Contents

Recommendation: Better results can sometimes be obtained by the use of one of the many modified or specialised lubricants recommended by cutting oil specialists. The general principle is to have more EP (Extreme Pressure) additives added with the degree of difficulty, usually hardness increase. Oils stick, and improve frictional properties essential in tapping tough applications. Application: Proper application of the lubricant is just as important as the type used. To be effective, ample quantities of lubricant must reach the chamfer or cutting portion of the tap during the entire tapping operation. In many cases, the lubricant must also aid in controlling or disposing of the chips. Flow: The flow of lubricant should be directed into the hole rather than at the tap and should have sufficient pressure to wash the chips away from the hole as much as possible. Also, if the flow is not continuous, it should start before the tap enters the hole and continue until the tap is completely reversed out of the hole. In this way, ample oil is provided at the start of the cut and loose chips will be suspended in the oil so that they do not interfere with the tap backing out of the hole. On machines where the work revolves and the tap is stationary, it is desirable to use several streams of lubricant on opposite sides of the tap, especially on horizontal tapping. Cleanliness: Tapping lubricants must always be clean. If filter equipment is not used, the lubricant must be replaced periodically to eliminate fine chips, grit and foreign matter that accumulate in the tank. Also, it is very important that the piping and tank are thoroughly flushed and cleaned before filling with new lubricant. The dilution of lubricants often changes during use so that additions may be necessary to maintain the recommended proportion of active materials.

ISO Taps

Use: Use of a suitable lubricant or cutting compound is necessary on most tapping operations. The type of lubricant as well as the method of application is often of extreme importance and can be responsible for the success or failure of a tapping operation.

Tool Holding

Lubricants

HSS Drills

Carbide Drills

Technical Information Tapping Information

Tapping drill formula The correct size of drill to give the desired percentage of thread can be calculated by using the following formula:

Thread Type

Formula

Example

Metric (ISO)

Drill Size = Nom, Tap Dia, in mm – Pitch

M6 × 1 = 5.00mm drill

Carbide Endmills

Warning: When drilling holes in materials which tend to work harden, care is needed to ensure the drills are sharp otherwise tap life is decreased.

HSS Endmills

The tapping drill hole diameter should be drilled as large as possible, within the respective fitting just under the upper permissible dimension of the tolerance. If the tapping drill hole diameter is too small, then this will cause the thread root diameter (minor diameter) to cut the material. This should be avoided, because the small chips which derive from the root of thread, clog the normal chip flow and rip pieces of material out of the finished thread. Consequently, the tap is overloaded and often breaks because of the high torque. Another problem which occurs in certain materials due to thread root diameter cutting, is when a chip-bulge has been formed around the root radius. The minor diameter of the tap is clogged with small chips, which leads to a clamping of the tool teeth are ripped out, which leads to tool breakage. It is therefore, necessary that the material which is to be tapped, be taken into account when determining the tap hole diameter. Typical materials which do not squeeze or clamp are iron, brass and bronze and materials which squeeze are steels, steel castings and malleable steels. The tap cuts more economically, when the tap drill hole diameter is within the upper range of the permissible tolerance.

DIN Taps

Tapping drill

Whitworth Form Threads (inch calculation)

1.28 Drill Size = Nom, Tap Dia, – ––– × % of thread depth TPI

1.28 75 Drill Size = 0.250 – ––– × ––– = 0.250 – 0.048 20 100 Therefore Drill Size = 0.202 Nearest Standard Drill = 5.1mm = 0.2007 inch

Reamers

1/4 BSW 75% thread required:

Unified Form Threads (inch calculation)

1.30 Drill Size = Nom, Tap Dia, – ––– × % of thread depth TPI

1.30 75 Drill Size = 0.250 – ––– × ––– = 0.250 – 0.049 20 100 Therefore Drill Size = 0.201 Nearest Standard Drill = 5.1mm = 0.2007 inch

Tech Info

1/4 UNC 75% thread required:

521

Contents

Technical Information Tapping Drill Size Chart

Carbide Drills

All sizes are “suggested sizes” only and may be varied to suit individual requirements M ISO Metric Coarse (60°)

HSS Drills

Tap Size

ISO Taps Tool Holding

M1.6 M2 M2.5 M3 M3.5 M4 M4.5 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M42 M45 M48 M52 M56

Pitch mm 0.35 0.4 0.45 0.5 0.6 0.7 0.75 0.8 1.0 1.25 1.5 1.75 2.0 2.0 2.5 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.5 4.5 5.0 5.0 5.5

Tapping Drill mm 1.25 1.6 2.05 2.5 2.9 3.3 3.7 4.2 5.0 6.8 8.5 10.2 12.0 14.0 15.5 17.5 19.5 21.0 24.0 26.5 29.5 32.0 37.5 40.5 43.0 47.0 50.5

DIN Taps

MF ISO Metric Fine (60°) Tap Size

Carbide Endmills HSS Endmills

M4 M5 M6 M8 M10** M10 M12** M12 M14** M14 M16* M18** M20* M22 M24 M25* M32* M40* M50*

Pitch mm 0.5 0.5 0.75 1.0 1.0 1.25 1.25 1.5 1.25 1.5 1.5 1.5 1.5 1.5 2.0 1.5 1.5 1.5 1.5

Tapping Drill mm 3.5 4.5 5.3 7.0 9.0 8.8 10.8 10.5 12.8 12.5 14.5 16.5 18.5 20.5 22.0 23.5 30.5 38.5 48.5

*Metric Conduit **Spark Plug

Reamers Tech Info

522

8UN (8 TPI) Unified National Form (60°) Tap Size

1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

T.P.I. 8 8 8 8 8 8 8 8

Tapping Drill mm 25.5 28.5 31.75 35.0 38.0 41.5 44.5 47.5

UNC Unified National Coarse (60°) Tap Size

#2 (0.086) #3 (0.099) #4 (0.112) #5 (0.125) #6 (0.138) #8 (0.164) #10 (0.190) #12 (0.216) 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2

T.P.I. 56 48 40 40 32 32 24 24 20 18 16 14 13 12 11 10 9 8 7 7 6 6 5 4.5

Tapping Drill mm 1.85 2.1 2.3 2.6 2.8 3.4 3.8 4.5 5.1 6.6 8.0 9.4 10.8 12.2 13.5 16.5 19.5 22.2 25.0 28.0 31.0 34.0 39.5 45.0

UNF Unified National Fine (60°) Tap Size

#3 (0.099) #4 (0.112) #5 (0.125) #6 (0.138) #8 (0.164) #10 (0.190) #12 (0.216) 3/16* 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1* 1-1/8 1-1/4 1-3/8 1-1/2

T.P.I. 56 48 44 40 36 32 28 32 28 24 24 20 20 18 18 16 14 12 14 12 12 12 12

Tapping Drill mm 2.1 2.35 2.65 2.9 3.5 4.1 4.6 4.0 5.5 6.9 8.5 9.8 11.5 12.8 14.5 17.5 20.5 23.5 24.0 26.5 29.5 33.01 36.0

*UNS

UNEF Unified National Form (60°) Tap Size

1/4 5/16 3/8 1/2 5/8 3/4 1

T.P.I. 32 32 32 28 24 20 20

Tapping Drill mm 5.6 7.2 8.8 11.8 14.75 18 24.2

BSW British Standard Whitworth (55°) Tap Size

1/16* 3/32* 1/8 5/32* 3/16 7/32* 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 2

T.P.I. 60 48 40 32 24 24 20 18 16 14 12 12 11 10 9 8 7 7 6 5 4-1/2

Tapping Drill mm 1.2 1.85 2.55 3.2 3.7 4.5 5.1 6.5 7.9 9.3 10.5 12.1 13.5 16.25 19.25 22.0 24.75 28.0 33.5 39.0 44.5

*WHIT. Form

BSF British Standard Fine (55°) Tap Size

3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4

T.P.I. 32 28 26 22 20 18 16 16 14 14 12 11 10 9 9 8 7

Tapping Drill mm 4.0 4.6 5.3 6.8 8.3 9.8 11.0 12.7 14.0 15.5 16.75 19.75 22.75 25.5 28.5 34.5 41.0

BSB British Standard Brass (55°) Tap Size

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

T.P.I. 26 26 26 26 26 26 26 26 26 26

Tapping Drill mm 5.2 6.8 8.4 10.0 11.6 13.2 14.8 18.0 20.8 24.3

G (BSPF) ISO G Parallel Series (55°) Tap Size

T.P.I.

G 1/16 G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1 G 1-1/4 G 1-1/2 G 1-3/4 G2 G 2-1/2

28 28 19 19 14 14 14 14 11 11 11 11 11 11

Tapping Drill mm 6.8 8.8 11.8 15.3 19.0 21.0 24.5 28.5 31.0 39.5 45.5 51.5 57.5 72.5

Rp (BSPPL) Sealing pipe thread parallel (55°)

Metric coarse M1

0.25

0.9

M1.1

0.25

1.0

M1.2

0.25

1.1

M1.4

0.3

1.28

M1.6

0.35

1.45

M1.7

0.35

1.55

M1.8

0.35

1.65

M2.0

0.40

1.8

M2.2

0.45

2.0

M2.3

0.4

2.1

M2.5

0.45

2.3

M2.6

0.45

2.4

0.5

2.8

M3.5

0.6

3.2

0.7

3.7

0.8

4.6

1.0

5.5

1.25

7.4

M10

1.5

9.3

M12

1.75

11.2

BSW

1/8

2.9

5/32

3.6

3/16

4.3

1/4

5.8

5/16

7.3

3/8

8.8

NPT-NPTF* National Pipe Taper 1:16 (60°)

Tap Size

T.P.I.

Tapping Drill mm

Tap Size

T.P.I.

Drill Only*

Drill & Reamer

Rp 1/8 Rp 1/4 Rp 3/8 Rp 1/2 Rp 3/4 Rp 1 Rp 1-1/4 Rp 1-1/2 Rp 2

28 19 19 14 14 11 11 11 11

8.6 11.5 15.0 18.5 24.0 30.2 39.0 45.0 56.4

1/16

6.3

6.0

1/8

8.5

8.2

1/4

11.0

10.8

3/8

14.5

14.0

1/2

18.0

17.5

3/4

23.0

11-1/2

29.0

28.5

1-1/4

11-1/2

37.5

37.0

1-1/2

11-1/2

43.5

11-1/2

55.5

55.0

Pg Steel conduit (80°) Tap Size

T.P.I.

Tapping Drill mm

Pg7 Pg9 Pg11 Pg13.5 Pg16 Pg21

20 18 18 18 18 15

11.3 13.9 17.3 19.1 21.2 26.8

NPSF National Pipe Straight (60°) Tap Size

T.P.I.

Tapping Drill mm

1/8

8.6

1/4

11.3

3/8

14.5

1/2

18.0

* Taper pipe threads of improved quality are obtained when taper is pre-formed using Sutton Tools Taper Pipe Reamers.

#1 (0.073) #2 (0.086) #3 (0.099) #4 (0.112) #5 (0.125) #6 (0.138) #8 (0.164) #10 (0.190) #12 (0.216) 1/4 5/16 3/8 7/16 1/2 #1 (0.073) #2 (0.086) #3 (0.099) #4 (0.112) #5 (0.125) #6 (0.138) #8 (0.164) #10 (0.190) #12 (0.216) 1/4 5/16 3/8 7/16 1/2 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1

UNC

Contents

Tapping Drill mm

64 56 48 40 40 32 32 24 24 20 18 16 14 13

1.7 2.0 2.3 2.6 2.9 3.2 3.8 4.4 5.0 5.8 7.3 8.8 10.2 11.7

72 64 56 48 44 40 36 32 28 28 24 24 20 20

1.7 2.0 2.3 2.6 2.9 3.2 3.9 4.5 5.1 6.0 7.5 9.0 10.6 12.1

28 19 19 14 14 14 14 11

9.25 12.5 16.0 20.0 22.0 25.5 29.25 32.0

UNF

G (BSPF)

BA (47.5°) Tap Size

Pitch mm

Tapping Drill mm

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 0.9 0.81 0.73 0.66 0.59 0.53 0.48 0.43 0.39 0.35 0.31 0.28 0.25 0.23 0.21 0.19

5.1 4.5 4.0 3.4 3.0 2.65 2.3 2.05 1.8 1.55 1.4 1.2 1.05 0.98 0.8 0.7 0.6

Carbide Drills

6.2 8.4 10.8 14.5 18.0 23.0 29.0 38.0 44.0 55.0

T.P.I.

HSS Drills

6.4 8.4 11.2 14.75 18.25 23.75 30.0 38.5 44.5 56.0

Tap Size

ISO Taps

28 28 19 19 14 14 11 11 11 11

Tapping Drill mm

T.P.I.

Tool Holding

Rc 1/16 Rc 1/8 Rc 1/4 Rc 3/8 Rc 1/2 Rc 3/4 Rc 1 Rc 1-1/4 Rc 1-1/2 Rc 2

Tap Size

DIN Taps

Drill & Reamer

Carbide Endmills

Drill Only*

HSS Endmills

T.P.I.

Thread forming (Fluteless taps)

Reamers

Tap Size

Thread forming (Fluteless taps)

Tech Info

Rc (BSPT)* ISO Rc Taper Series 1:16 (55°)

Contents

Technical Information Fluteless Taps

Carbide Drills

Fluteless taps Fluteless taps do not cut threads in the same manner as conventional taps – but actually FORM and FLOW the threads with an absence of chips. Used under suitable conditions, these taps produce threads with a high degree of finish not possible with ordinary taps. Ductile materials are most appropriate for forming of threads and must have a minimum 10% elongation.

HSS Drills

Benefits of thread forming

What's New?

• •

Figure 4. New polygon profile

Higher speeds and tool life Reduced possibility of breakage due to no cutting edges and robust tool construction

Figure 5. New radiused blend on polygon profile

Figure 1.

No chips produced

Figure 6. T hread profile with radius crest

Figure 2.

Higher tensile strength threads produced due to grain structure following the thread form

Figure 7. Polished tool surface, surface finish

Figure 3. For use in through and blind holes applications

ISO Taps

Figure 1.

Figure 4.

Figure 2. Formed Thread

Figure 5.

Cut Thread

Figure 3.

Tool Holding

Figure 6.

Figure 7.

DIN Taps

Suitable for wide range materials

-Low carbon steels -Leaded steels -Austenitic stainless steels -Alloy steels; typically up to 1200 N/mm2, (36 Rc) with a minimum 10% elongation

-Aluminium die castings alloys (low silicon, 10% max;) -Wrought aluminium alloys (Ductile) -Zinc die casting alloys -Copper and copper alloys

Carbide Endmills

Percentage of thread required Because the thread produced by a fluteless tap is substantially stronger than a conventional thread, greater tool life and efficiency may be obtained when forming up to 65% thread. Threads may be formed up to 80% of depth, but tool life will be reduced and work clamping pressure necessarily increased. Greater tapping speeds allow the metal to flow far more readily, so 60 feet per minute minimum may be used as a guide, but this could increase with the type of material being tapped. A depth of 65% is recommended for the ductile materials mentioned, but this percentage will be reduced for less ductile materials to maintain all-round efficiency.

Tapping drill formula for fluteless taps HSS Endmills

Refer Tapping Drill Size Chart for recommended sizes (Suitable for Unified, Whitworth and Metric sizes only). The formula to calculate the theoretical hole size for a required percentage of thread is:

Formula

Example Drill size for 65% of thread in a M6 x 1.0 threaded hole would be:

Drill size = nominal thread dia. (in mm)– (0.007 x % of thread x pitch)

Drill size = 6 – (0.007 x 65 x 1.0 (pitch)) = 5.54mm (Use 5.50mm drill (Stockable drill) = 71%)

Reamers Tech Info

524

It is to be noted that the drill size for fluteless tapping is always larger than the P.D. of the thread. A drill size equal to the P.D. of the thread would produce 100% of thread, but this is NOT recommended. As the additional driving torque is only up to 50% increase, any conventional driving equipment using the square as a drive is suitable for fluteless tapping.

Lubrication

Countersinking

In general it is best to use a good cutting oil or lubricant rather than a coolant for fluteless tapping. Sulphur base and mineral oils, along with most friction reducing lubricants recommended for use in cold extrusion or metal drawing, have proven best for this work. Make sure lubricant is clean, free from chips swarf and filings in suspension, which produce a poor finish and jamming, sometimes breakage – extra filtration may be required.

Because the fluteless tap displaces metal, some metal will be displaced above the mouth of the hole during tapping, countersink or chamfer the hole prior to tapping will reduce the extrusion within the countersink and not interfere with the mating part.

Contents Carbide Drills

Technical Information Tapping Drill Size Chart (Fluteless)

(Fluteless) Roll Taps:

0.25

0.90

M1.1

0.25

1.00

M1.2

0.25

1.10

M1.4

0.3

1.25

M1.6

0.35

1.45

M1.7

0.35

1.55

M1.8

0.35

1.65

M2.0

0.4

1.80

M2.2

0.45

2.00

M2.3

0.4

2.10

M2.5

0.45

2.30

M2.6

0.45

2.40

M3.0

0.5

2.75

Tapping Drill mm

1/8

3.60

4.30

3.70

3.80

3/16 #10

4.30

1/4

5.80

5/16

7.30

8.80

0.8

4.60

1.0

5.55

1.25

7.40

3/8 M10

3.10

5/32 0.7

2.90

3.20

1.50

Carbide Endmills

0.6

Tapping Drill mm

HSS Endmills

M3.5

T.P.I.

ISO Taps

M1.0

T.P.I.

9.30

Reamers

M/C Screw Gauge

Tool Holding

Tapping Drill mm

Fraction

BSW

DIN Taps

Pitch mm

Metric

UNC

HSS Drills

ISO Coarse

Tech Info

Thread Size

525

Contents

Technical Information Thread Forms Components & Tap Limits

Carbide Drills

Thread Systems

HSS Drills ISO Taps

The ISO standard is the international standard intended to be adopted throughout the world to unify and rationalise screw threads at an international level. The ISO standard recognises two groups of screw threads, (a) ISO metric, a complete thread system in metric units and (b) ISO inch Unified which is covered by British Standard BS 1580 and American Standard ANSI – B1-1 – Unified screw thread systems. The Whitworth and BA screw threads are obsolete but still widely used during the period of transition. All measurements must have a controlling point or base from which to start. In the case of a screw thread, this control point is called BASIC or theoretically correct size, which is calculated on the basis of a full thread form. Thus, on a given screw thread, we have the Basic Major Diameter, the Basic Pitch Diameter, and the Basic Minor Diameter. The Basic Profile is the profile to which the deviations, which define the limits of the external and internal threads, are applied. While it is impossible in practice to form screw threads to their precise theoretical or BASIC sizes, it is possible and practical to establish limits to which the deviation must not exceed. These are called the “Maximum” and “Minimum” Limits. If the product is no smaller than the “Minimum Limit” and no larger than the “Maximum Limit”, then it is within the size limits required. This difference between the Maximum and Minimum Limits is the TOLERANCE. In actual practice, the Basic size is not necessarily between Maximum and Minimum Limits. In most cases, the Basic Size is one of the Limits. In general, tolerances for internal threads will be above Basic and for external threads, below Basic.

Basic Profile for ISO Inch (Unified) and ISO Metric

Tool Holding

The basic form is derived from an equilateral triangle which is truncated 1/8 of the height at the major diameter and 1/4 of the height at the minor diameter. The corresponding flats have a width of P/8 and P/4 respectively. Figure 1. In practice major diameter clearance is provided by the tap beyond the P/8 flat on internal threads and beyond the P/4 flat on external threads. These clearances are usually rounded.

ISO Metric Tolerance Positions Three tolerance positions are standardised for bolts and two for nuts. These are designated e, g and h for bolts and G and H for nuts. As in the ISO System for limits and fits, small letters are used to designate tolerance positions for bolts and capital letters are used for nut tolerance positions. Also the letters h and H are used for tolerance positions having the maximum metal limit coincided with the basic size, i.e., with a fundamental deviation of zero. Figure 2.

DIN Taps

ISO Metric Tolerance Grades

Carbide Endmills

Figure 1

A series of tolerance grades designated 4, 5, 6, 7 and 8 for nut pitch diameters. An extended series of tolerance grades, designated 3, 4, 5, 6, 7,8 and 9, for bolt pitch diameters. An important factor here is that for the same tolerance grade the nut pitch diameter tolerance is 1.32 x the corresponding bolt pitch diameter tolerance. Size and recommendations of fits can be obtained from the Australian Standards AS 1275 or AS 1721. Figure 2 PP

PP —— 88

major dia.

nut

HSS Endmills

H— H — 88

pitch dia.

33 —— HH 88

3030 6060

PP —— 22

Reamers

minor dia. 9090

PP —— 44

axis of screw thread H H= =0,86603P 0,86603P

Tech Info

526

H— H — 44

H— H= =0,21651P 0,21651P — 44 H— H= =0,10825P 0,10825P — 88

3— 3H H= =0,32476P 0,32476P — 88 5— 5H H= =0,54127P 0,54127P — 88

55 —— HH HH 88

8G 8G 8H 8H 7G 7G 7H 7H 6G 6G 6H 6H 5G 5G 5H 5H 4H 4H

fundamental deviation

basic pitch diameter

bolt

3h3h4h4h 5h5h 6h6h 7h7h

5g5g6g6g 7g7g 8g8g 9g9g

6e6e 7e7e

fundamental deviation

Contents Carbide Drills

Technical Information Thread Limits

Metric Taps; Comparison Tap Limits & Product Classes and Grades

JIS 2

Upper Deviation

Old/JIS Product

Class

Tolerance

µm

ISO Tap Grade

Recommended Limit

Tap Limits

Microns µm

µm

M1.0

x 0.25

ISO 1

+ 6 / 17

+ 10 / 25

M1.1

x 0.25

ISO 1

+ 6 / 17

+ 10 / 25

x 0.25

ISO 1

+ 6 / 17

+ 10 / 25

x 0.3

ISO 1

+ 6 / 18

+ 10 / 25

M1.6

x 0.35

ISO 1

+ 7 / 20

+ 10 / 25

+ 25 /40

M1.7

x 0.35

ISO 2

+ 20 / 34

+ 10 / 25

+ 25 /40

M1.8

x 0.35

ISO 2

+ 20 / 34

+ 10 / 25

+ 25 /40

M2.0

x 0.4

ISO 2

+ 21 / 36

+ 10 / 25

+ 25 /40

M2.2

x 0.45

ISO 2

+ 23 / 38

+ 10 / 25

+ 25 /40

M2.3

x 0.4

ISO 2

+ 21 / 36

+ 10 / 25

+ 25 /40

M2.5

x 0.45

ISO 2

+ 23 / 38

+ 10 / 25

+ 25 /40

M2.6

x 0.45

ISO 2

+ 23 / 38

+ 10 / 25

+ 25 /40

M3.0

x 0.5

100

ISO 2

+ 24 / 40

+ 10 / 25

+ 25 /40

M3.5

x 0.6

112

ISO 2

+ 27 / 45

+ 10 / 25

+ 25 /40

M4.0

x 0.7

118

ISO 2

+ 29 / 48

+ 20 /40

x 0.8

125

ISO 2

+ 30 / 50

+ 20 /40

x 1.0

150

120

ISO 2

+ 35 / 59

+ 20 /40

x 1.0

150

120

ISO 2

+ 35 / 59

+ 20 /40

x 1.25

160

130

ISO 2

+ 38 / 63

+ 20 /40

+ 40 / 60

M10

x 1.5

180

140

ISO 2

+ 42 / 70

+ 20 /40

+ 40 / 60

M12

x 1.75

200

160

ISO 2

+ 48 / 80

+ 40 / 60

+ 60 / 80

M14

x 2.0

212

170

ISO 2

+ 51 / 85

+ 40 / 60

+ 60 / 80

DIN Taps

Tool Holding

ISO Taps

M1.2 M1.4

HSS Drills

Pitch

ISO Tolerance

M16

x 2.0

212

170

ISO 2

+ 51/ 85

+ 40 / 60

+ 60 / 80

M18

x 2.5

224

190

ISO 2

+ 54 / 90

+ 40 / 60

+ 60 / 80

M20

x 2.5

224

190

ISO 2

+ 54 / 90

+ 40 / 60

+ 60 / 80

M22

x 2.5

224

190

ISO 2

+ 54 / 90

+ 40 / 60

+ 60 / 80

M24

x 3.0

265

200

ISO 2

+ 64 / 106

+ 40 / 60

+ 60 / 80

Carbide Endmills

Tap Size

Tap Limits

HSS Endmills

Product Tolerance

Tech Info

Reamers

P limits; they stock the smaller P limit for SP Taps, and the larger P limit for PO taps. Where there is only the one “P” limit; it is the same limit for both SP & PO Taps

527

Contents

Technical Information ISO Metric Tap Class & Tolerance

Carbide Drills The ISO metric system of tap tolerances comprises three classes of tap sizes which are calculated from the Grade 5 nut tolerance, irrespective of the nut grade to be cut as follows:

ISO, Class 1 – Class 2 – Class 3 HSS Drills ISO Taps

The tolerances of these three classes are determined in terms of a tolerance unit t, the value of which is equal to the pitch tolerance value TD2 grade 5 of nut (extrapolated up to pitch 0.2mm): t = TD2 grade 5 The value of the tap pitch diameter tolerance is the same for all three classes 1, 2 and 3: it is equal to 20% of t. The position of the tolerance of the tap with respect to the basic pitch diameter results from the lower deviation the values of which are (see Figure 3): for tap class 1: + 0.1 t for tap class 2: + 0.3 t for tap class 3: + 0.5 t

Choice of tolerance class of the tap with respect to the class of thread to be produced. Unless otherwise specified, the taps of classes 1 to 3 will generally be used for the manufacture of nuts of the following classes: ISO, Class 1: for nuts of limits 4H and 5H ISO, Class 2: for nuts of limits 6H and 5G ISO, Class 3: for nuts of limits 7H – 8H and 6G.

Figure 3

Tool Holding

nut limits

7H 6H

DIN Taps

ISO tap classes

Class 3

Carbide Endmills HSS Endmills Reamers Tech Info

528

pitch diameter of basic profile

Class 2 Class 1 0.1 t

0.7 t 0.3 t

0.5 t

Contents

This system is well known. It has now been accepted by ISO as the recommended tolerance for ISO inch threads down to 0.06 inch nominal diameter. The arrangement of the allowance and the various classes of pitch diameter tolerance for a normal length of engagement of the mating threads is shown in this diagram. The pitch diameter tolerance for Class 2A bolts is shown as 100 units, and the fundamental deviation and other tolerances are shown as percentages of the Class 2A tolerance. Figure 4. Figure 4

HSS Drills

Carbide Drills

Technical Information Unified Screw Thread Tolerancing System

class 1B nut

195 130

97.5

basic pitch diameter

ISO Taps

class 2B

class 3B

75 100

150

class 2A

bolt

class 1A

Tool Holding

class 3A

GH Limits for JIS Roll Taps GH Limits are applied to JIS Metric and Unified Thredflo Tap Threads due to market demands in the JIS standard.

GH12

+0.0055 –

GH11

+0.0050 –

GH10

+0.0045 –

GH9

+0.0040 –

GH5

+0.0020 –

GH4

+0.0015 – +0.0005 – 0–

GH Limits: S teps of 0.0005" at 12.7 µm

GH3

+0.0010 –

– +114

– +77

GH6

+0.0025 –

– +127

– +89

GH7

+0.0030 –

– +140

– +101

GH8

+0.0035 –

Micron µm

– +64 – +51 – +39 – +26

GH2

– +13

GH1

HSS Endmills

+0.0060 –

–0

Reamers

Inch

Carbide Endmills

This system provides for a range of pitch diameters for each size of tap: the height limit of pitch diameters being the basic pitch diameter plus increments or units of .0005". It is designated by the letter “GH” followed by a numeral indicating the number or units applying to the particular “GH” size. The tap manufacturer’s tolerance is applied as minus. This is the limit which will normally be supplied. Alternative “GH” limits other than those shown in the price list can be made to special order.

DIN Taps

Unified Taps The “GH” System

For Sutton Tools Metric (mm) Roll / Fluteless Taps (Limit same as the “RH” & “G” Limits) GH Limits: Steps of 0.0127 mm N = GH number

GH LIMITS

Upper limit: 0.0005" x N Lower limit: (0.0005" x N) – 0.0005

Tech Info

basic pitch dia.

529

Contents

Technical Information British Standard Threads

Carbide Drills

Basic Profile for Whitworth (BSW, BSF and WHIT.) Thread forms Figure 5

British Standard Whitworth Form H — 6

HSS Drills

The sides of the thread form an angle of 55° with one another, and the top and bottom of the full triangle are truncated one-sixth of the height. The actual depth of the thread is equal to two-thirds of the height of the generating triangle and is equal to 0.6403 times the pitch. The crests and roots are rounded to a radius of 0.137329 times the pitch. Figure 5.

h 27.5º r

ISO Taps

55º H — 6 Pitch P H = 0.160082P H = 0.96049P — 6

Tool Holding

Fig 5

2 H = 0.640327P h =— 3

r = 0.137329P

The Whitworth Screw Thread Tolerance System Figure 6

DIN Taps

nut

medium class

basic pitch

100

diameter

66 2/3

normal class

150

150 100

150

Carbide Endmills

3/4" dia. and under

bolt

normal class

over 3/4" dia.

150

150 3/4" dia. and under

over 3/4" dia.

fundamental deviation (allowance) close class

medium class

free class

Pitch diameter tolerance zones of recommended combinations of classes of bolts and nuts having Whitworth screw threads. Figure 6.

HSS Endmills

British Tap Size Zone Limits

Figure 7

Reamers

British Standard Zone 3 and Zone 4 limits are normally applied to Whitworth and BA taps. The values for position and tolerances are formulated and must be obtained from the standard’s tables. The accompanying chart shows the zone limits relationship for ground threads. Figure 7.

Zone 4

Zone 2

Tech Info

530

Zone 1

basic pitch diameter

Zone 3

Contents

The International Standard Pipe Tap Thread System (ISO) has been derived from the original Whitworth gas and water pipe tap threads, formerly known as BSPF (Fastening) and BSPT (Taper), these systems have been so widely used throughout Europe and the United Kingdom that they have been metricated, whilst still retaining the Whitworth thread form. These popular thread systems are the basis for the ISO parallel “G” series and the taper “R” series, these systems are endorsed and in agreement with the current British and Australian standards. For comparison, the pitch diameter tolerance zones are given for both the parallel and taper systems.

ISO Taps

“G” Fastening Parallel Pipe Threads – ISO 228, AS1722 PT2 and BS2779. This parallel thread system has only one positive internal thread tolerance and two classes of external tolerances. This series constitutes a fine series of fastening connecting pipe threads for general engineering purposes, the assembly tolerances on these threads are such as to make them unsuitable for pressure tight seal by the threads themselves. For the conveying of fluids, the seal may be produced by gaskets, flanges, or “O” rings etc.

INTERNAL

THREAD internal thread

basic pitch BASIC PITCH diameter DIAMETER

“R” Sealing Taper Pipe Threads – ISO 7, AS1722 PT1 and BS21. The taper rate is 1-16 on diameter. This series is for tubes and fittings where pressure tight joints are made by threads, these threads therefore must have a full form profile (no truncations). TAPER PARALLEL The series include a taper external thread (R) for assembly with either taper internal (Rc) or parallel internal (Rp) threads. The Rp series has a unilateral tolerance (+/–) which normally requires a special below basic low limit tap, to allow for sizing deviations at the start of the internal thread, the size is gauged at this position, with an Rc taper gauge. The low limit Rp tap size, allows a minimum accommodation length to be machined, with an equivalent material saving possible.RC R RP

taper

parallel

TAPER

PARALLEL

MAXIMUM INTERNAL PITCH DIAMETER

MINIMUM INTERNAL RP PITCH DIAMETER maximum

basic pitch BASIC PITCH diameter DIAMETER (at gauge gauge plane) (at plane)

MAXIMUM internal INTERNAL pitch PITCH diameter DIAMETER minimum internal MINIMUM INTERNAL pitch diameter PITCH DIAMETER

Carbide Endmills

BASIC PITCH DIAMETER

HSS Endmills

EXTERNAL THREAD

DIN Taps

Reamers

Tech Info

EXTERNAL INTERNAL THREAD THREAD external thread

GB Tool Holding

BASIC PITCH DIAMETER (at gauge plane) RC

HSS Drills

Carbide Drills

Technical Information ISO Pipe Tap Thread Systems

531

Contents

Technical Information Endmill Terminology

Carbide Drills

Endmill Definitions overall length

HSS Drills

shank length

flute length cutting length

For shank styles refer page 513

shank diameter

end teeth relief angle

cutting diameter

ISO Taps rake

Tool Holding

peripheral relief angle flute core

DIN Taps

Center cutting endmill raised land width

Carbide Endmills

Conventional milling versus climb milling

Conventional milling. Point A become work hardened material to be removed by the cutting depth next tooth (feed per tooth)

A milling cutter can cut in two directions, sometimes known as climb or conventional.

HSS Endmills

Conventional milling: The depth of the cut starts at zero thickness, and increases up to the maximum. The cut is so light at the beginning that the tool does not cut, but slides across the surface of the material, until sufficient pressure is built up and the tooth suddenly bites and begins to cut. This deforms the material (at point A on the diagram, left), work hardening it, and dulling the tool. The sliding and biting behaviour leaves a poor finish on the material.

material feed

A A

Chip formation during climb milling cutting depth (feed per tooth)

Reamers Tech Info

532

Climb milling: Each tooth engages the material at a definite point, and the width of the cut starts at the maximum and decreases to zero. The chips are disposed behind the cutter, leading to easier swarf removal. The tooth does not rub on the material, and so tool life may be longer. However, climb milling can apply larger loads to the machine, and so is not recommended for older milling machines, or machines which are not in good condition. This type of milling is used predominantly on mills with a backlash eliminator.

cutter rotation

material feed

Contents Carbide Drills

Technical Information Endmills - Types

Optimised geometry for Austenitic Stainless Steels & other long chipping materials up to 1000 N/mm2

AI & CU

For slotting wrought aluminium alloys with efficient chip evacuation, due to high relief angles and 40° spiral

Normal Roughing Form - general purpose

Semi Roughing Form - Ideally suited to soft, long chipping materials.

Coarse Form - ideally suited to soft, non-ferrous materials.

Fine Pitch Roughing Form - ideally suited to hard, short chipping materials

HRS

Special Fine Pitch Roughing Form - Universal use

Wave Form - ideally suited to titanium & nickel alloys

STF

Special tooth form - Semi Roughing Form, ideally suited to materials up to 1400 N/mm2

HSS Drills

ISO Taps

Slotting & Finishing - Use in soft materials, quick spiral 45° up to 600 N/mm2

Tool Holding

DIN Taps

Finishing Form

Illustration

Carbide Endmills

Application

HSS Endmills

Description

Tech Info

Reamers

Type

533

Contents

Technical Information Reamers

Carbide Drills

Hints on use Feeds HSS Drills

In reaming, feeds are usually much higher than those used for drilling. The amount per feed may vary with the material, but a good starting point would be between 0.038mm and 0.10mm per flute per revolution. Too low a feed may result in glazing, excessive wear, and occasionally chatter. Too high a feed tends to reduce the accuracy of the hole and may lower the quality of the finish. The basic idea is to use as high a feed as possible and still produce the required accuracy and finish.

ISO Taps

Stock to be removed

Tool Holding

For the same reason, insufficient stock for reaming may result in a burnishing rather than a cutting action. It is very difficult to generalise on this phase as it is closely tied with the type of material the finish required, depth of hole, and chip capacity of the reamer. For machine reaming 0.20mm for a 6mm hole, 0.30mm for a 12mm hole, and 0.50mm for a 50mm hole, would be a typical starting point guide. For hand reaming, stock allowances are much smaller, partly because of the difficulty in hand forcing the reamer through greater stock. A common allowance is 0.08mm to 0.13mm.

Speeds The most efficient speed for machine reaming is closely tied in with the type of material being reamed, the rigidity of the set-up, and the tolerance or finish required. Quite often the best speed is found to lie around two-thirds the speed used for drilling the same material.

DIN Taps

A lack of rigidity in the set-up may necessitate slower speeds, while occasionally a very compact, rigid operation may permit still higher speeds. When close tolerances and fine finish are required it is usually found necessary to finish the reamer at considerably lower speeds.

Carbide Endmills

In general, reamers do not work well when they chatter. Consequently, one primary consideration in selecting a speed is to stay low enough to eliminate chatter. Other ways of reducing chatter will be considered later, but this one rule holds: SPEEDS MUST NOT BE SO HIGH AS TO PERMIT CHATTER.

m/min Aluminium and its alloys �� 20 – 35 Brass and Bronze, ordinary �� 20 – 35 Bronze, high tensile �� 18 – 22 Monel Metal �� 8 – 12 Cast Iron, soft �� 22 – 35 Cast iron, hard �� 18 – 22 Cast Iron, chilled �� 7 – 10 Malleable Iron �� 18 – 20 Steel, Annealed ��13 – 18 Steel, Alloy ��12 – 13 Steel, Alloy 300-400 Brinell �� 7 – 10 Stainless Steel �� 5 – 12

Chatter The presence of chatter while reaming has a very bad effect on reamer life and on the finish of the hole. Chatter may be the result of several causes, some of which are listed: 1. Excessive speed. 2. Too much clearance on reamer. 3. Lack of rigidity in jig or machine. 4. Insecure holding of work. 5. Excessive overhang of reamer in spindle. 6. Excessive looseness in floating holder. 7. Too light a feed. Correcting the cause can materially increase both reamer life and the quality of the reamed holes.

Coolants for Reaming In reaming, the emphasis is usually on finish and a lubricant is normally chosen for this purpose rather than for cooling. Quite often this means a straight cutting oil.

Limit of tolerance on cutting diameter The tolerance on the cutting diameter measured immediately behind the bevel or taper lead for parallel reamers listed is M6 as specified in BS122-PT2-1964. It is not practicable to standardise reamer limits to suit each grade of hole and the limits chosen are intended to produce H7 holes.

Nominal Diameter Range

HSS Endmills Reamers Tech Info

534

The following charts gives recommended surface meter per minute values which may be used as a basis from which to start.

Inch

Cutting Edge Diameter mm

Inch

Over

Up to and including

Over

Up to and including

High +

Low +

High +

Low +

0.0394

0.1181

0.0004

0.0001

0.009

0.002

0.1181

0.2362

0.0005

0.0002

0.012

0.004

0.2362

0.3937

0.0006

0.0002

0.015

0.006

0.3937

0.7087

0.0007

0.0003

0.018

0.007

0.7087

1.1181

0.0008

0.0003

0.021

0.008

1.1811

1.9085

0.0010

0.0004

0.025

0.009

1.9085

3.1496

0.0012

0.0004

0.030

0.011

Special Sales T: (61 3) 9280 0800 F: (61 3) 9464 0015 E: specsales@sutton.com.au

APPLICATION TAP - SPECIAL ENQUIRY Customer No.:

New Customer

Order No. |

Company:

Contact:

Address:

Phone:

State / Province:

Fax:

Country:

Email:

Tap Details Tool Material

Thread Cutting Thread Forming

HSS HSSE PM-HSSE V3 PM-HSS Co SPM VHM

NB: If special thread form, please supply details on separate drawing.

Machine Details

Component: ________________________________

Machine Type:

Material Group: _______________________________

CNC Semi Auto Manual

Material Grade: _______________________________

Machine Direction:

Characteristics of Material:

Vertical Horizontal Oblique

Long Chipping

Hole Type: Through Hole

Blind Hole

Tapping Hole Size: ___________

Drilled

Work Piece Holder: Cast

Manufacturer: ___________ ____________________ Dimensions: ___________ Tolerance: ____________ Product No: ___________ Speed: ______________

Workpiece Details

Short Chipping

Existing Method

Uncoated Steam Oxide TiN TiAlN TiCN other ______________

Coating

Punched

________________________________

Stationary Rotating

Size: ________________ Thread Limit: __________

Hole Depth:

Quantity:

Basic Geometry

d1 __________________ d2 __________________ I1 __________________ I2 __________________ I3 __________________ I4 __________________ sq a/f _________________

Coolant: Neat Oil Mist / Dry Emulsion >5% Emulsion >10%

Feed: CNC Mechanical Pneumatic Hydraulic Manual

Tapping Attachment: Tapping Chuck Tension Compression Tapping Attachment Tapping Chuck (rigid) Collet Chuck (length

compensating)

Please copy and fax to our Special Sales Dept. on (61 3) 9464 0015

Item # 499980185B

Drawing / Notes

Special Sales T: (61 3) 9280 0800 F: (61 3) 9464 0015 E: specsales@sutton.com.au

APPLICATION HSS DRILLS - SPECIAL ENQUIRY Customer No.:

New Customer

Order No. |

Company:

Contact:

Address:

Phone:

State / Province:

Fax:

Country:

Email:

Drill Details

Quantity:

Basic Geometry

Tool Material:

Tool Type:

HSS HSSE PM-HSSE V3 other _____________________________________

Drill Step Drill Countersinks Subland Drills Core Drills Centre Drills

Plus Coating:

Total Length (mm): _____________________________ Number of Steps: Without With __________________________________ steps

 Yes  No

TiN TiCN TiAIN Steam Oxide other _____________________________________

Plus Internal Cooling:

 Yes  No

Step Diameter (mm): d1_________________

d2 __________________

d3_________________

d4 __________________

d5_________________

d6 __________________

Point Design

Shank Design:

Point Geometry: Relieved Cone For Grey Cast Iron Centre Point Facet Point Grind other _____________________________________

Special Point Grind, Form:

Spiral:

Reinforced Without Flat With Flat Parallel Straight Shank Morse Taper other _____________________________________

Please copy and fax to our Special Sales Dept. on (61 3) 9464 0015

Item # 499980185A

Drawing / Notes

Special Sales T: (61 3) 9280 0800 F: (61 3) 9464 0015 E: specsales@sutton.com.au

APPLICATION CARBIDE DRILL - SPECIAL ENQUIRY Order No. |

Company:

Contact:

Address:

Phone:

State / Province:

Fax:

Country:

Email:

Quantity:

Quantity: l1

l1 l2 d1

l3 l 3 l2 l

l3 l2

l1 l 1

l3 l 3 l2 l

d1 d1

(specify if known)

d2 d2

d1 d1

d2 d2

(specify if known) (4 – 20mm)

(3 – 20mm)

Shank-Ø d2

(DIN 6535)

Shank length l3

(DIN 6535)

Drilling depth l3

(maximum 7 x D)

Flute length l2

(9.5 – 155mm)

Total length l1

(60 – 205mm)

120°

130°

140°

120°

Uncoated TiN TiCN

140°

TiAN

(specify if known)

Uncoated TiN TiCN

AlCrN

l4 d2

l3 l 3 l2 l

l4 d1

l4 l 4 d2

Quantity: l

l3 l2

d12

l3 l 3 l2 l

l1 l 1 d3

d3 d3

l1 l 1

Quantity: l l d12

d1 d2

SOLID CARBIDE STEP DRILL

TiAN

d3 d3

Surface finish/coating Cost per tool

130°

(specify if known)

d1 d2

Point angle Point geometry

Carbide grade

(specify if known)

Step-Ø d1

(4 – 20mm)

(3 – 20mm)

Body-Ø d2

(4 – 20mm)

(3 – 20mm)

Shank-Ø d3

(DIN 6535)

Shank length l3

(DIN 6535)

Shank form

(DIN 6535)

Step length l4

(3 – 100mm)

Drilling depth l3

(maximum 7 x D)

Flute length l2

(9.5 – 155mm)

Total length l1

(60 – 205mm)

Point angle

120°

130°

140°

120°

130°

140°

Step angle

60°

90°

120°

60°

90°

120°

Point geometry

(specify if known)

Uncoated TiN TiCN

Surface finish/coating Cost per tool

TiAN

(specify if known)

Uncoated TiN TiCN

AlCrN $

Please copy and fax to our Special Sales Dept. on (61 3) 9464 0015

TiAN

AlCrN

Item # 499980185C

Shank form

l3 l2 d1

l3 l1 l 1

Norm-Ø d1

WITHOUT Internal Cooling

Carbide grade

WITH Internal Cooling

SOLID CARBIDE DRILL WITHOUT STEP

New Customer

Customer No.:

Special Sales T: (61 3) 9280 0800 F: (61 3) 9464 0015 E: specsales@sutton.com.au

APPLICATION MILLING - SPECIAL ENQUIRY Customer No.:

New Customer

Order No. |

Company:

Contact:

Address:

Phone:

State / Province:

Fax:

Country:

Email:

Endmill Details

Range

Norm-Ø d2

(3 – 20mm)

Shank-Ø d2 to DIN 6535

(4 – 20mm)

Shank length l3 to DIN 6535

l1 Ø 3 – 10mm

(28 – 100mm)

from Ø 10 – 20mm

(56 – 150mm)

l2 Ø 3 – 10mm

(3 – 40mm)

from Ø 10 – 20mm

(10 – 65mm)

w2 Ø 3 – 6mm

(20o – 45o)

from Ø 6 – 20mm

(20o – 55o)

Helix angle No. of cutting edges

 Yes  No

Plus Internal Cooling

Cutting length

Quantity:

Basic Geometry

Total length

(Ø 4 – 20mm)

 Yes  No

Plus Coating TiN

TiCN

TiAN

Tool Material

AlCrN

Specify grade (if known)

Carbide PM-HSSE HSS-Co HSS

Ø 3 – 6mm

(2 – 4mm)

from Ø 6 – 20mm

Detail Regarding Application

(2 – 6mm)

from Ø 16 – 20mm

Range of applications

(2 – 8mm)

Material description Material hardness

Shank Design Straight Shank (DIN 6535)

Slotting Finishing

Finishing endmills (Ø 3 – 20mm)

Roughing endmills (Ø 6 – 20mm)

with Chip Breaker

Fine

Coarse

(N/mm2 or HRC)

Application types Roughing

Peripheral Geometry

(Ø 4 – 20mm)

Slotting

Roughing

Finishing

Copy milling

Drawing / Notes

Face Geometry Point angle ws

(180º + 5º)

Cutting to Centre

Yes

Corner Preparation Sharp edge Corner protection

mm x 45º (Ø 0.03 – 1.5mm )

Corner radius

mm x d1 (Ø 0.3 – 2/3mm)

Sharp edge

Yes

Corner protection

Corner radius

Ballnose

Please copy and fax to our Special Sales Dept. on (61 3) 9464 0015

Item # 499980185D

Ballnose

Regrinding Service… Reduce your production costs Sutton Tools continue to reinvest to provide a ‘complete’ range in cutting tool products and services. Our regrinding service returns tools to ‘as new’ condition. Quality is guaranteed from the CNC grinding machines which are operated by highly experienced personnel, using advanced technology. A full regrinding service is offered in Europe. HSS and carbide tooling can be reconditioned by our highly experienced personnel, with reproducible, high quality results, every time. We regrind HSS Powdered Metallurgy and grades of Solid Carbide, complemented by fifth generation thin film coatings. Sutton Tools Recoating Service In Europe we provide a full regrinding service for Sutton Tools distributors. Using world-leading technology, coatings are available to solve a wide range of problems relating to friction and wear, thereby improving tool performance and increasing tool life, up to 300-1000% compared to uncoated.

Send & Return Service Sutton Tools re-sharpening boxes will be provided for safe shipment of your tools for servicing. Simply fill in the request form, and we will return the tools to ‘as new’ condition as instructed. Contact us for your Sutton Tools re-sharpening box and request form.

Sutton Tools Pty Ltd ABN 12 004 175 731

Global Offices Australasia Australia (Head Office) • New Zealand Europe France • Germany • Italy • The Netherlands www.suttontools.com

499980054_0421

The Netherlands Bruijellestraat 4, 5048 Ae Tilburg, Nederland T+31 13 220 1480 F +31 13 220 1481 E suttontools.eu@sutton.com.au

9 311963 452586

Australia (Head Office) 378 Settlement Road, Thomastown 3074, Victoria Australia T +61 3 9280 0800 F +61 3 9464 0015