931 29
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING
BAGGER-STYLE FRAME •The closest frame to stock made in the aftermarket industry •Designed to accept all OEM parts without any modifications needed •Handcrafted using the highest-quality CNC’d and laser-cut components, allowing the builder a painless bike build •The strength and quality of this frame makes it like no other in the industry •Features stock rake and stock stretch •Accepts a 130-150mm rear tire, or 200mm tire with any 200mm kit for a stock frame •Main frame rails are 11/8” tubing •Use with any Evolution or Twin Cam FLT drivetrain •Rear motor mounts are CNC-machined •Accepts stock gas tank, fenders, seat, axle, covers and accessories; stock pivot shaft and components; stock front end; stock battery box; stock or Chopper Guys custom billet swingarm; or 200mm wide tire kit for a stock frame PART # •Made in the U.S.A. 0501-0049 NOTE: Swingarm not included, see page 934 for custom billet swingarm.
DESCRIPTION Bagger-style frame
SUG. RETAIL $2,967.95
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE FAT GUY 200MM TIRE BAGGER PLATE FRAMES FRAME KIT •Run 200mm tire on all bagger models TIRES, •CNC-machined, lasered and formed components TUBES & •Features a 30° rake WHEELS •1” extended, billet steel swingarm, accepts 1” axle •Lowered 1” to provide a lower center of gravity for weight ratio HARDWARE, •Symmetrically widened for balance CHEMICALS •Accepts stock or custom Evolution or Twin Cam FLT style motor, transmission, front end assembly and gas tank & TOOLS •Made in the U.S.A. NOTE: Swingarm bushing kit PART #1302-0167, COVERS, sold separately. PART # DESCRIPTION SECURITY NOTE: Transmission not included. 0501-0050 200mm tire bagger frame kit & GENERAL NOTE: Minor gas tank modifications required.
932
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $3,333.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE
FAT GUY RIGID BOBBER FRAME •Lightweight construction •CNC billet construction of frame components •Accept stock FXST/FLST-style oil tank and rear caliper •Has 0” stretch at the backbone with a 30° rake in the neck •Accepts chain or OEM drive belt set-up •Made in the U.S.A.
SEATS & SISSY BARS EXHAUST
NOTE: Rigid frames will accept Evo and Shovelhead engines, or Panheads with upper mount modifications. PART # 0501-0048
DESCRIPTION Bobber 130 Rigid frame
FUEL/AIR SYSTEMS
SUG. RETAIL $1,662.95
ENGINE 0501-0025
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
0501-0027
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
TWIN CAM FXR-STYLE FRAME KITS •Main frame rails are 11/4” tubing with a 21/2” square backbone •Feature a 28° rake and 1” backbone stretch •Will work with Twin Cam “A” motor and FLT complete drivetrain •Forward or mid control mounts included, along with a battery box cover •Wide-tire kit will accept up to a 180mm tire with stock 11/2” belt •Wide-tire and standard-width kits accept stock-length front ends, stock fuel tanks and most FXR stock components •Wide-tire frame is symmetrically widened with engine offset 5/8” to the left; requires custom seat •Standard-width frames available in kit or frame-only versions •Kits include custom billet swingarm, pivot shaft and axle with hardware (unless otherwise noted) •All are rubber mounted •Made in the U.S.A. PART # DESCRIPTION SUG.RETAIL WIDE-TIRE FRAME KIT 0501-0025 Twin Cam FXR frame kit w/ billet swingarm $2,500.95
CABLES BRAKES
PART # DESCRIPTION STANDARD-WIDTH FRAME KITS 0501-0027 Twin Cam FXR frame only (no swingarm)
240 FXR DROP SEAT FRAME KITS •The first frame kit of its kind! •Set up to run Twin Cam “A” or Evolution drivetrains with a 240 wide tire and dropped seat •Features include a 21/2” square backbone, side rails that have been lowered 2”, 11/4” frame rails, dual swingarm shock mounts and a billet swingarm •Add stock or aftermarket FXR model components •Has both forward and mid control mounts •Accept custom side covers, stock oil tanks and stock or aftermarket gas tanks •CNC-milled mounts and brackets are precision formed •28° rake •1/2” offset chain drive kit required •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0501-0059 240 FXR Twin Cam frame kit $2,767.95
All part numbers in BOLD MAGENTA are new for 2010.
SUG.RETAIL $1,662.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
933
SECTION
17
WINDSHIELDS TOURING PRO-STREET DROP-SEAT FXR FRAME KIT
LUGGAGE
•The frame dedicated to those who live in the fast lane •Includes a 30° rake, 3” lowered neck height, 2” backbone stretch and a drop-seat •Frame rails are 11/4”, .120 wall with a 21/2” square, .120 wall Pro-Street backbone •Precision formed and CNC-milled mounts and brackets with forward and mid-control mounts •Accepts Twin Cam “A” or Evolution FXR/FLT drivetrains •Accepts Buell or any 29”-30” long front end •Kit also includes billet swingarm, pivot shaft and axle kit (pivot shaft is 3/4” and axle is 1”) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0501-0066 FXR Pro Street $2,764.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
DS-111115
TRANSMISSION & DRIVELINE 0501-0024
GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS
DS-111127
FXR FRAME KITS •Rubber mount like stock •Stronger and lighter than stock •Kit includes a rear axle •Frame weighs 50 lb. and swingarm weighs 15 lb. •Pro-Street frame will accept a 180 series rear tire with a stock 11/2” rear belt •Pro-Street specs – 2” stretch, 33° rake, 5/8” offset •The standard FXR frame has 1” stretch, 28° rake •Accepts stock FXR accessories •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-111115 Wide FXR Pro-Street w/ billet swingarm $2,500.95 0501-0024 Standard FXR frame w/ billet swingarm 2,166.95 DS-111127 Standard FXR frame only 1,662.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1302-0167 FOOTRESTS & LICENSE PLATE FRAMES TIRES, 1301-0058 TUBES & WHEELS CUSTOM SWINGARM HARDWARE, •CNC-machined billet steel FXR BRAKE ADAPTER •Brake adapter required to mount OEM CHEMICALS •More rigid than a stock swingarm; improves handling brake caliper on Chopper Guys FXR steel Chopper Guys Bagger-style frame (PART #0501-0049) and 82-01 OEM FLHT/FLHX/FLHR/FLTR frames & TOOLS •Fits billet swingarm •Accepts stock pivot shaft and components; 1” axle not included •Made in the U.S.A. COVERS, •Made in the U.S.A. DESCRIPTION SUG. RETAIL DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL PART # SECURITY PART # For 88-94 FXR $42.95 $847.95 1302-0167 Bushing kit $285.95 DS-111167 & GENERAL 1301-0058 Custom swingarm
934
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
WINDSHIELDS TOURING LUGGAGE DRESSER FRAME •OEM-style 98-06 Dresser frame with 26° rake •Accepts Twin Cam 88 and Evo-style engines with matching FLT/FLHT transmissions •Accepts stock sheet metal, forks, swingarm and suspension •Made in the U.S.A. PART # DESCRIPTION 0501-0063 98-06 Dresser-style frame
2406-2610
SEATS & SISSY BARS SUG. RETAIL $2,103.95
EXHAUST FUEL/AIR SYSTEMS
2406-2612
ENGINE TRANSMISSION & DRIVELINE
2005-2610
0912-2610
XL RIGID FRAMES •Available in three styles for use with 86-03 XL motors •PART #2406-2610 has 0” stretch and 30° rake; uses stock length XL front fork (31”), accepts a flat-side Fat Bob gas tank and uses a 5” or 6” rear fender •PART #2406-2611 has a 2” stretch in the backbone and 4” stretch in the down tubes with a 40° rake; requires a 12”-over (39”) front fork, does not have fuel tank mounts and uses a 5” or 6” rear fender •PART #2406-2612 has a 3” stretch in the backbone and 6” stretch in the down tubes with a 40° rake; requires 15”-over (42”) front fork, does not have fuel tank mounts and uses a 5” or 6” fender •Frames are all 1” tubing and include a 3/4” rear axle •Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive •Use PM or GMA rigid rear brake caliper kits •Will also accept XL forward controls or stock mid-controls and most exhaust systems •Frames will require neck post bearing cups, oil tank and battery box (must be purchased separately) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL XL FRAMES ACCESSORIES 2406-2610 0” stretch frame $993.95 2005-2610 Raw oil tank $149.95 2406-2611 2”/4” stretch frame 1,176.95 0912-2610 Battery box 56.95 2406-2612 3”/6” stretch frame 1,176.95
0501-0060
BIG TWIN BOBBER STYLE RIGID FRAMES
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
0501-0055
•Made with 11/4” DOM tubing (.120” wall thickness) •Features 0” stretch in backbone and down tubes; 30° rake •Designed with an hourglass style neck with internal fork stop •Includes CNC OEM styled axle adjusters plates, neck gussets, motor mounts and transmission mounting brackets •Can be run with 4- or 5-speed transmissions •Frames will accept all Big Twin style motors except Twin Cam •Will accept direct exchange of FXST/FLST components; some welding will be required •PART #0501-0055 will accept 130-series tire with a belt drive or a 180-series tire with a chain drive •PART #0501-0060 will accept 180-series tire with a belt drive or a 200-series tire with a chain drive •PART #0501-0067 will accept 180-series tire with a belt drive or a 180-series with a belt drive or a 200-series with a chain drive NOTE: Will require a 86-99 FXST/FLST length rear axle and axle adjusters with coarse thread. PART # DESCRIPTION SUG. RETAIL 0501-0055 Big Twin bobber style frame $1,333.95 0501-0060 Big Twin bobber 200 style frame 1,333.95 0501-0067 Rigid wishbone frame 1,539.95
GASKETS & SEALS
0501-0067
All part numbers in BOLD MAGENTA are new for 2010.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
935
SECTION
17
WINDSHIELDS 0503-0047
TOURING LUGGAGE SEATS & SISSY BARS EXHAUST
DS-111055
FUEL/AIR SYSTEMS DS-111061
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES
SOFTAIL WIDE DRIVE KITS •Available in two styles: one style keeps the transmission in the center of the bike (stock location), and the other offsets the transmission; offset versions are available in a hidden-axle or open-axle design •Come in two sizes: for use with 200mm tires or 240mm tires •Wide drive kits require an experienced mechanic to install them; installation of kits that keep the transmission in the stock location requires the disassembly of the transmission to replace the main shaft and 5th gear (mainshaft and 5th gear included) •Require the removal of the cast fender strut ears; maintain stock ride height •Wide drive kits for 00-07 models include swingarm, 3/4” axle, fender struts, spacers, front pulley, all required hardware and instructions •Wide drive kits for 88-99 models include swingarm, 3/4” axle, fender struts, transmission offset mount, shaft extensions, spacers and other required hardware and instructions •200mm kits require a 11/8” belt and a 9” fender; the 240mm kits use a 11/8” belt (07 models use a 20mm belt), require offset 8.5” wheel and require a 101/2” fender (sold separately)
DS-111056
NOTE: Stock calipers on 88-99 applications will not clear rim; require custom calipers. NOTE: Installation of Wide Drive kits requires a trained technician.
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
936
KITS WITH TRANSMISSION IN STOCK LOCATION PART # DESCRIPTION HIDDEN-AXLE DESIGN 0503-0047 For 07 FLST, FXST, 240mm tire DS-111061 For 00-05 FXST, 00-06 FLST, 200mm tire DS-111062 For 00-06 FXST, FLST, 240mm tire
SUG. RETAIL $3,475.95 3,626.95 3,626.95
KITS WITH TRANSMISSION OFFSET PART # DESCRIPTION OPEN-AXLE DESIGN DS-111055 For 88-99 FXST, DS-111057 For 88-99 FXST, HIDDEN-AXLE DESIGN DS-111056 For 88-99 FXST, DS-111058 For 88-99 FXST,
SUG. RETAIL FLST, 200mm tire FLST, 240mm tire
$2,311.95 2,355.95
FLST, 200mm tire FLST, 240mm tire
2,311.95 2,355.95
240MM SOFTAIL WIDE DRIVE KITS WITHOUT STRUTS •Kits include wide swingarm, 3/4” axle, axle covers, shaft extensions, transmission mount (for 90-99 only), spacers and required hardware •Does not include rear fender struts; designed for use with RSD Vintage Rear Fender Kit, PART #1401-0178, or custom 101/2” rear fender and custom struts •Installation requires the removal of stock fender struts •Requires the use of a 11/8” or narrower rear belt PART # 0503-0044 0503-0045
DESCRIPTION For 00-06 FXST, FLST models For 90-99 FXST, FLST models
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $3,368.95 3,368.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 0503-0057
EXHAUST
0503-0058
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 0503-0059
0503-0021
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS
0431-0317
3501-0358
CABLES 200MM WIDE DRIVE KITS FOR DRESSERS •A revolutionary customization for Dressers; makes a Dresser look unlike any other bike on the road •The easiest way to install a wide drive; bolt-on kit requires no modification •Allows owner to retain saddlebags and stock exhaust; tourpak and backrest will require OEM detachable docking hardware to properly mount 1401-0188 •Kit includes a wide swingarm with a 1” rear axle, rear fender, fender strut covers, saddlebag support, billet aluminum primary spacers, transmission components, shaft extension and all necessary brackets and hardware; 07-08 kits do not require replacing the transmission shaft, gear, belt or pulley •Accepts 16” x 5.5” or 18” x 5.5” rear wheels and most tires up to 200mm wide •97-06 models require a 11/8” belt and rear pulley •Models with 18” rear use OEM brake caliper; models with 16” rear require a smaller custom brake caliper •Installation of tourpak or backrest will require OEM detachable docking hardware and docking kit PART #3550-0075 (sold separately) •Air valve relocation bracket relocates the air fill valve for the rear suspension when using Wide Drive kit; available separately
BRAKES TANKS & OIL FILTERS 1401-0189
DASHES & GAUGES
1401-0190
NOTE: Installation of Wide Drive kits requires a trained technician. PART # DESCRIPTION WIDE DRIVE KITS 0503-00571 For 07-08 FLHT, FLHR and FLTR models, OEM-style fender 0503-00581 For 07-08 FLHT, FLHR and FLTR models, custom-style fender with taillight assembly 0503-00591 For 07-08 FLHT, FLHR and FLTR models, smooth-style fender 0503-0021 For 02-06 FLHT, FLHR and FLTR models, OEM-style fender ACCESSORIES 3501-0358 Saddlebag relocation kit for 07-08 FLHT, FLHR and FLTR models 0431-0317 Air valve relocation bracket for 97-08 FLHT, FLHR and FLTR models REAR FENDERS FOR 97-06 FLHT, FLHR, FLTR 1401-0188 Repl. OEM-style fender 1401-0189 Optional smooth-style fender 1401-0190 Optional custom-style fender w/ taillight assembly 1
Requires saddlebag relocation kit, PART #3501-0358, in order to reuse stock saddlebags.
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $3,520.95 4,142.95 3,520.95 5,457.95 500.95 47.95 796.95 796.95 1,502.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
937
SECTION
17
WINDSHIELDS 1401-0187 1401-0185
TOURING
1401-0186
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
WIDE FENDER KITS FOR DRESSERS •The easiest way to install a wide fender; bolt-on kit requires no modification •Allows owner to retain stock saddlebags and exhaust •Kits include one-piece, 14-gauge steel wide fender, fender strut covers, frame extension, support bracket and all necessary hardware PART # DESCRIPTION •Accept tires up to 200mm with a wide swingarm conversion FOR 97-07 FLHT, FLHR, FLTR or 180mm tires with a chain drive conversion 1401-0185 OEM, taillight cutout •Three styles available 1401-0186 Smooth, no taillight cutout •Installation of tourpak and backrest will require OEM detachable 1401-0187 Custom w/ taillight assembly docking hardware and docking kit PART #3550-0075 (sold separately)
TRANSMISSION & DRIVELINE
SUG. RETAIL $1,395.95 1,395.95 2,115.95
DOCKING KIT FOR WIDE FENDERS •Allows use of OEM mounting brackets for tourpaks and backrests on Custom Valley wide fenders for Dressers •Stainless steel construction PART # DESCRIPTION SUG. RETAIL 3550-0075 Docking kit $369.95
GASKETS & SEALS ELECTRICAL 2406-1536
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
938
240MM WIDE DRIVE KITS FOR DYNA GLIDE •With these kits you can install a 240mm tire on a Dyna Glide and still keep everything in the center of the bike •96-05 kits include swingarm, 3/4” axle, fender struts, shaft extensions, spacers and all required hardware and instructions; 06-09 kits include swingarm, 1” axle, fender struts, spacers and all required hardware and instructions (requires the removal of the cast fender strut ears) •Installation requires the disassembly of the transmission to replace the main shaft (96-05 only) and frame modifications; the 240mm kits require some clearancing on the inner primary •Will require the use of a custom wide rear fender (sold separately) NOTE: Installation of Wide Drive kits requires a trained technician. PART # 0503-0060 2406-1536 2406-1535 2406-1534
DESCRIPTION 06-09 Dyna Glide; 02-05 Dyna Glide; 00-01 Dyna Glide; 96-99 Dyna Glide;
requires requires requires requires
a a a a
20mm wide belt 11/8” wide belt 11/8” wide belt 11/8” wide belt
SUG. RETAIL $3,475.95 3,733.95 3,733.95 3,733.95
200MM WIDE DRIVE KIT FOR FXR •With these kits you can install a 200mm tire using a 11/8” rear belt and still keep everything in the center of the bike •Kits include swingarm, 1” axle, billet aluminum primary spacer with hardware, all necessary transmission parts, shaft extension for compensating sprocket, starter with hardware and etailed instructions •Will require the use of a custom wide rear fender (sold separately) NOTE: Installation of Wide Drive kits requires a trained technician. PART # 0503-0043
All part numbers in BOLD MAGENTA are new for 2010.
DESCRIPTION For 90-94 FXR
SUG. RETAIL $3,733.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE 0503-0082
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 0503-0075
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING 2030-0307
1501-0249
CABLES
BAGGER MO’TIRE 180 REAR TIRE KIT •The ultimate MO (MakeOver) for a bagger allows the use of a 180 rear tire while using an OEM belt; riders get the cleanliness and reliability of a belt drive without a lot of the work required with other 3516-0058 wide tire kits, as it does not require swingarm replacement or disassembly of the transmission •Kits include stretched fender, Curvaceous upper filler panels (lower filler panels must be purchased separately), pulleys, all necessary mounting hardware and gaskets (08 kits do not include pulleys or gaskets, not required). There is no need for an extended main shaft or offset primary; just quick, easy installation with the use of Klock Werks Signature E-coated, predrilled, stamped steel fender and fillers •Kits are available in 6” or 2” stretch (over stock length) with or without frenched license plate pocket •Detachable 180 tire kits are for use with detachable Tour-pak® and feature slotted fillers and require the use of Tour-Pak® Rack •Chrome rack with logo accepts OEM Tour-Pak® and Klock Werks Passenger Backrest •Made in the U.S.A. NOTE: Kit requires purchase of Drag Specialties belt PART #1204-0061 H-D OEM belt part #40024-07 for 97-06 models and also requires purchase of an 18” x 5.5” rear wheel with a 3.485” pulley side hub. PART # FOR 08 FLHT, 0503-0082 0503-0078 0503-0084 0503-0080 0503-0081 0503-0077 0503-0083 0503-0079 FOR 07 FLHT, 0503-0074 0503-0070 0503-0076 0503-0072 0503-0073 0503-0069 0503-0075 0503-0071
DESCRIPTION SUG. RETAIL FLHR, FLTR W/ STOCK 6-SPEED AND CUSH DRIVE 6” stretch, frenched license; detachable $1,584.95 6” stretch, frenched license; non-detachable 1,584.95 6” stretch, smooth; detachable 1,584.95 6” stretch, smooth; non-detachable 1,584.95 2” stretch, frenched license; detachable 1,584.95 2” stretch, frenched license; non-detachable 1,584.95 2” stretch, smooth; detachable 1,584.95 2” stretch, smooth; non-detachable 1,584.95 FLHR, FLTR W/ STOCK 6-SPEED OR 97-07 W/ S&S 6-SPEED 6” stretch, frenched license; detachable 1,884.95 6” stretch, frenched license; non-detachable 1,884.95 6” stretch, smooth; detachable 1,884.95 6” stretch, smooth; non-detachable 1,884.95 2” stretch, frenched license; detachable 1,884.95 2” stretch, frenched license; non-detachable 1,884.95 2” stretch, smooth; detachable 1,884.95 2” stretch, smooth; non-detachable 1,884.95
HANDLEBARS, CONTROLS & MIRRORS
PART # DESCRIPTION SUG. RETAIL FOR 97-06 FLT, FLHT, FLHR, FLTR W/ STOCK 5-SPEED OR BAKER DD6 0503-0066 6” stretch, frenched license; detachable $1,884.95 0503-0062 6” stretch, frenched license; non-detachable 1,884.95 0503-0068 6” stretch, smooth; detachable 1,884.95 0503-0064 6” stretch, smooth; non-detachable 1,884.95 0503-0065 2” stretch, frenched license; detachable 1,884.95 0503-0061 2” stretch, frenched license; non-detachable 1,884.95 0503-0067 2” stretch, smooth; detachable 1,884.95 0503-0063 2” stretch, smooth; non-detachable 1,884.95 FRENCHED LICENSE PLATES 2030-0307 Chrome lighted 199.95 2030-0308 Chrome non-lighted 99.95 2030-0309 Raw non-lighted 59.95 ACCESSORIES 1501-02491, 2 Detachable passenger backrest 229.95 3516-00581 Detachable Tour-Pak® Rack 299.95 1 2
Requires the use of OEM camlocks to properly mount. Accepts OEM backrest pads.
All part numbers in BOLD MAGENTA are new for 2010.
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
939
SECTION
17 TXR STABILIZERS
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
•CNC-machined from 6061 T-6 aluminum •Improve handling by triangulating motor and transmission in the chassis to eliminate frame wobble at high speeds and while cornering •Adjustable intermediate member with integrated patented Gooden-Tite polyurethane and aluminum isolator bushings •Open plate design with ventilating air scoops to assist in transmission cooling •Easy bolt-up installation •Available in black anodized or polished finish •Include stainless steel hardware and Heim joints •Made in the U.S.A. PART # DESCRIPTION FOR 93-08 FLT, FLHT, FLHR, FLTR, FLHX MODELS 1111-0001 Black anodized 1111-0003 Polished
1111-0001 1111-0003
1111-0007 SUG. RETAIL $399.95 449.95
PART # DESCRIPTION SUG. RETAIL FOR 93-08 FLT, FLHT, FLHR, FLTR, FLHX MODELS WITH BAKER PLUS ONE OIL PAN OR CUSTOM CYCLE ENGINEERING FINNED OIL PAN 1111-0007 Black anodized $347.95 1111-0008 Polished 398.95
DXR STABILIZERS •CNC-machined from 6061 T-6 aluminum •Improve handling by triangulating motor and transmission in the chassis to eliminate frame wobble at high speeds and while cornering •Adjustable intermediate member with integrated patented Gooden-Tite polyurethane and aluminum isolator bushings •Open plate design with ventilating air scoops to assist in transmission cooling PART # •Easy bolt-up installation FOR 06-10 DYNA MODELS •Available in black anodized or polished finish •Include stainless steel hardware and Heim joints 1111-0009 1111-0010 •Made in the U.S.A.
1111-0009 DESCRIPTION Black anodized Polished
SUG. RETAIL $399.95 449.95
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
ULTRA RIDE STABILIZING SYSTEM TOURING LINK •The answer to the handling challenges faced by most touring models has arrived •Helps stabilize the chassis by keeping the motor/swingarm assembly aligned with chassis without causing unnecessary vibration to the rider •Ground clearance will not be affected •Easy to install •Made in the U.S.A. PART # 1111-0006
DESCRIPTION 93-08 FL models (all)
SUG. RETAIL $199.95
•Dramatically frees your bike from that “loose” feeling and high-speed wobbles that can plague the bike at speed •System connects the powertrain to the frame by adding stabilizing links •Allows the drivetrain to move freely in a forward motion, but eliminates side-to-side movement •Cut pattern on rear mount plate allows unrestricted air to circulate 0933-0047 around the oil bag •Mount brackets manufactured from 6061-T6 billet aluminum, PART # DESCRIPTION SUG. RETAIL all mounting hardware and FOR 93-08 FLHT/FLTR/FLHR/FLHX turnbuckles are 0933-0047 Brushed aluminum $399.95 stainless steel 0933-0049 Black 399.95 •Made in the U.S.A.
Swingarm not included
FRAMES, SUSPENSION 1302-0208 & FENDERS 1302-0207 1302-0257 FOOTRESTS SWINGARM CONVERSION RETROFIT KITS & LICENSE •Replaces stock Cleve Bloc style swingarm bushings with 1302-0258 spherical bearings PLATE FRAMES •Dramatically changes handling and tracking of SWINGARM RETROFIT Dresser models TIRES, •Retrofits the improved swingarm from 02-08 Touring •Spherical bearings greatly reduce the stiction at the models to a 84-01 Touring models TUBES & swingarm pivot, which provides a quicker reaction time to WHEELS •No need to alter transmission housing harsh road conditions •Will require the purchase of a 02-08 style OEM swingarm •Negates any lateral and torsional movement in the swingarm HARDWARE, with bearings, rear caliper, 1” diameter rear axle and 1” rear •Made in the U.S.A. wheel bearings CHEMICALS •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL & TOOLS PART # DESCRIPTION SUG. RETAIL FOR 84-01 FLT/FXR MODELS 1302-0207 Swingarm conversion retrofit kit $283.95 COVERS, FOR 80-84 FLT/FLHT/FLHS Swingarm conversion retrofit kit Retrofit kit $255.95 1302-0208 SECURITY 1302-0257 w/ pivot shaft 345.95 Retrofit kit w/ pivot shaft 296.95 & GENERAL 1302-0258
940
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
0215-0205
WINDSHIELDS DS-540795
TOURING SWINGARM BEARINGS, RACES, BUSHINGS
1302-0084
1302-0001
SWINGARM BEARING KITS •Individual bearing kits that include required bearings, seals, spacers and lock tabs PART # 1302-0091 1302-0084 1302-0001
DESCRIPTION For 00-10 Softail models; repl. OEM #s 9270A, 11282 For 84-99 Softail models; repl. OEM #s 9076, 11158 For 85-86 FX/FXWG models (except Softail, FXR/FLT)
SUG. RETAIL $41.95 44.95 25.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
TRANSMISSION & DRIVELINE
•Kit includes pivot shaft, two bushings, two chrome spacers, chrome nut and washer PART # DESCRIPTION SUG. RETAIL 0309-2250 For 00-07 FXST/FLST; repl. OEM #s 47610-00, 48048-00 and 48049-00 $46.95
•Eliminates the nut-bolt and cotter key look with a flush-mount swing-arm bolt •Includes shaft with peaked, polished stainless steel end caps
LUGGAGE
ENGINE
SWINGARM PIVOT SHAFT KIT
SOFTAIL FLUSH-MOUNT SWING-ARM PIVOT SHAFT
PART # 1302-0166
•Bearings, bushings or races for various H-D models 0502-0194 •Sold as a set or individually •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL DS-540795 Bearing w/ race for 85-86 FX/FXWG (set); repl. OEM #s 9033 and 9052 $12.95 DS-540796 Bearing only for 85-86 FX/FXWG (ea.) 7.95 DS-540797 Race only for 85-86 FX/FXWG (ea.) 5.95 0215-0205 Bearing w/ race for 85-86 FX/FXWG (set); repl. OEM #s 9033 and 9052 10.95 0502-0194 Right bearing and race for 86-99 XL; also fits left swingarm bearing and race for 91-05 Dyna Glide; repl. OEM #47082-81 (set) 7.95 0502-0195 Left bushing for 86-03 XL; repl. OEM #47083-81 (ea.) 5.95
DESCRIPTION SUG. RETAIL For 00-07 FXST/FLST; repl. OEM #47610-00 $112.95
GASKETS & SEALS ELECTRICAL
1302-0259
LIGHTING
1302-0278
SWINGARM PIVOT SHAFTS 1302-0279
SWINGARM PIVOT SHAFTS •Stronger and more rigid than stock •Has a memory which helps prevent bending and twisting by highpowered motors •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1302-0278 For 02-10 FLT/FLHT; repl. OEM #47505-02 $72.95 1302-0279 For 84-94, 99-00 FXR; repl. OEM #47492-89A 77.95
SOFTAIL SWINGARM AXIS TUBE BOLT KIT •Kit contains two chrome-plated 3/4”-16 x 3” grade 8 hex bolts and two chrome washers •Made in the U.S.A. PART # DESCRIPTION DS-190901 For 84-99 Softail
SUG. RETAIL $26.95
1303-0076
•Each part has a 12-point head on both ends for a symmetrical look and performance •Special 12-point nuts without a flange have been CNC-machined for each application; CNC-machined and hand-polished flange washers replace the factory-stamped washers for a precision look •Nut end is mirror-polished •Made from 630 stainless steel with a tensile strength of 170,000 psi (15% stronger than GR8) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1302-0260 For 08-10 FXST/FLST $149.95 1302-0259 For 00-07 FXST/FLST $149.95
HANDLEBARS, CONTROLS & MIRRORS
SWINGARM PIVOT BOLT SET
TANKS & OIL FILTERS
•Socket cap fasteners made from stainless steel with a polished finish •Manufactured from only the best materials that are certified SDF (Seamless and Defect Free), heat treated to a minimum of 180,000 psi (20% stronger than GR8) and then the threads are rolled to a UNJ3A spec •Made in the U.S.A. PART # DESCRIPTION 1302-0168 For 84-99 Softail models
SOCKET-HEAD SWINGARM END CAP BOLT KITS
•Chrome-plated, CNC-machined T-6 billet aluminum •Available in smooth or ball-milled design •Include mounting hardware •Made in the U.S.A. PART # DESCRIPTION FOR 84-94/99-00 FXR 1303-0076 Smooth 2406-8768 Ball-milled
SUG. RETAIL $102.95 102.95
•Chrome finish •Sold in 4-pk. DS-190123 •Made in the U.S.A. PART # DESCRIPTION FOR FXR OR FLT; REPL. OEM #S 4729 AND 3782 7/16” -14 x 11/4” w/ center cap plugs; DS-190121 repl. OEM #67830-59 7/16” -20 x 11/4” DS-190123
All part numbers in BOLD MAGENTA are new for 2010.
BRAKES
DASHES & GAUGES
SUG. RETAIL $62.95
2406-8768
SWINGARM PIVOT BLOCKS
CABLES
DS-190121
SUG. RETAIL
$12.95 10.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
941
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS
SWINGARM PIVOT COVERS
SWINGARM MOUNT
•Chrome-plated domed covers with a smooth finish •Easy installation with setscrews •Sold in pairs •Made in the U.S.A.
•Meets or exceeds OEM specifications •Sold each PART # 0933-00531
1
DESCRIPTION For 86-08 FLT, 86-94 FXR; repl. OEM #47564-86B
SUG. RETAIL
1303-0025
PART # DESCRIPTION SUG. RETAIL 2401-0120 For 00-07 FXST/FLST (except FLSTF/FXSTD/FLSTN) $30.95
$19.95
Will fit 85 models that have been updated with OEM swingarm pivot update kit.
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
1303-0044
SWINGARM PIVOT BOLT COVERS •Quality chrome-plated billet aluminum construction •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 00-07 FXST/FLST (EXCEPT FXSTD, FLSTF, FLSTN) 1303-0044 Warrior $59.95 1303-0045 Smooth 59.95 1303-0046 Milled 59.95 1303-0047 Crusader Maltese cross 59.95
HEADLIGHT VISOR HOLE PLUG/SWINGARM PIVOT CAP
1303-0047 PART # DESCRIPTION SUG. RETAIL FOR 04-07 XL 1303-0094 Warrior $56.95 1303-0091 Nasty 56.95 1303-0093 Milled 56.95 1303-0092 Crusader Maltese cross 56.95
•Chrome-plated cap plugs the headlight mounting hole on 86-06 XL and 84-06 FX headlight visors •Also for dressing up 82-94 FXR swingarm pivots •Made in the U.S.A.; sold each PART # DS-190982
DS-240019
HANDLEBARS, CONTROLS & MIRRORS •Clean, no-spring look in a bolt-on version •Completely smooth, chrome-plated design •Made in the U.S.A. PART # 0502-0078
DESCRIPTION For 84-99 Big Twin
DESCRIPTION Repl. OEM #s 67865-89 and 67830-59
SUG. RETAIL $4.95
0510-0108
1” LOWERED KICKSTANDS
BOLT-ON SPRINGLESS KICKSTAND
BRAKES
•Die-cast, chromed and securely held in place by a setscrew •Add a clean look SUG. PART # DESCRIPTION RETAIL 1303-0026 For 00-07 Softail models $17.95 1303-0025 For 84-99 Softail models 13.95
1303-0046
1303-0045
LIGHTING
CABLES
SWINGARM PIVOT BOLT COVERS
SUG. RETAIL $174.95
1902-0039
•Chrome-plated forged steel •1” shorter than stock kickstand •Mounts to stock mount and accepts stock spring PART # DESCRIPTION DS-240019 For 89-06 FXST and FLST models 0510-0108 For 90-10 FXD models
SUG. RETAIL $79.95 79.95
DS-233677
TANKS & OIL FILTERS
0510-0038
DASHES & GAUGES DS-233675 FRAMES, SUSPENSION CHROME & FENDERS KICKSTAND KITS 1902-0038 •Complete kit includes 1902-0037 FOOTRESTS 1902-0036 a one-piece polished chrome mount with & LICENSE spring tab, kickstand, leg stop, spring and nut PLATE FRAMES CHROME TELESCOPIC KICKSTAND •Mounting repair kit available; includes •Telescopic design allows adjustment of 1” mount, spring, leg stop and nut TIRES, •Mounting brackets are machined from stainless steel •Mounting bracket only may be to eliminate chrome wear in contact area TUBES & purchased separately ball-bearing design return spring for positive feel and clean look WHEELS •Hidden •Works great for bikes that have been lowered PART # DESCRIPTION DS-233677 Complete kickstand kit for 85-86 FXST, FX models HARDWARE, •Made in the U.S.A. DESCRIPTION SUG. RETAIL 0510-0038 Complete kickstand kit for 89-99 Softail models CHEMICALS PART # 1902-0036 Front mount, 84-99 FXST models, (standard length) & TOOLS 4-speed FX models $199.95 0510-0039 Complete kickstand kit for 89-99 Softail models Rear mount, 84-99 FXST (drilling required) 199.95 (1” under stock length) COVERS, 1902-0037 Rear mount, 00-10 FXST models 199.95 DS-233675 Kickstand mounting repair kit for PART #DS-233677 SECURITY 1902-0038 Rear mount, all FXR models 199.95 DS-233676 Repl. mounting bracket only; repl. OEM #50041-80A & GENERAL 1902-0039
942
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $65.95 62.95 62.95 22.95 16.95
SECTION DS-240055
DS-240054
DS-240044
DS-240045
17
WINDSHIELDS TOURING LUGGAGE
DS-240043
CHROME KICKSTANDS •High-strength steel kickstands with a brilliant chrome finish •Replaces OEM kickstands perfectly •Overstock kickstand lengths are for bikes with longer suspension than stock •Understock kickstands are for bikes with lowered suspension PART # DESCRIPTION SUG. RETAIL FOR 89-06 FXST, FLST AND 84-00 FLT DS-2400551 Stock length for 89-06 FXST and FLST models; repl. OEM #50087-89A (11” L) $46.95 Stock length for 84-00 FLT models; repl. OEM DS-2400541 #50075-83/50075-91A (11” L) 46.95 FOR 85-86 BIG TWIN AND 84-88 FXST, FLST Stock length; repl. OEM #50061-36E (101/2” L) 42.95 DS-2400441 0510-00611 Stock length, round (101/2” L) 58.95 0510-0062 1” over stock length, round 58.95 DS-2400502 1” over stock length, OEM style 47.95 DS-2400452 1” under stock length, custom round 81.95 FOR 84-94 FXR MODELS DS-2400433 Stock length for 84-90 FXR, FXRS and FXLR; 31.95 repl. OEM #50031-84A (123/4” L)
DS-240205
SEATS & SISSY BARS
0510-0078
EXHAUST
0510-0079 PART # FOR 86-10 XL 0510-0078 0510-0079 DS-2400011 DS-240003 1
2
3
DESCRIPTION SUG. RETAIL MODELS For 04-10 models, stock length $49.95 For 04-10 models, 1” shorter than stock length 49.95 For 86-88 models that have been lowered 2” (7” L) 52.95 Fits 92-03 Hugger and 97-99 1200 Custom; 52.95 repl. OEM #50072-92 (81/4” L)
Big Twin, Softail, FLT and XL kickstands are measured from the first bend at the top to the first bend at the bottom of the kickstand. Kickstands that are shorter than stock length are for bikes that have been lowered. Kickstands that are longer than stock length are for bikes with 4-6” longer fork tubes with no change in rake. FXR kickstands are measured from the center of the mounting hole to the first bend at the bottom of the kickstand.
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
DS-233678 DS-240330
ELECTRICAL LIGHTING
DS-240004
DS-240201
DS-240210
DS-233679
HANDLEBARS, CONTROLS & MIRRORS
CHROMED KICKSTAND COMPONENTS •For various Big Twin models PART # DS-240004 DS-240201 DS-240210 DS-240205
DESCRIPTION SUG. RETAIL Kickstand mounting support for 85-99 FXST, FLST models; repl. OEM #50018-85 $16.95 Kickstand mounting support for 84-85 FX, FXST, FXWG (except FXR, FXRS); repl. OEM #50014-74 16.95 Kickstand leg stop for 84-87 FX, FXST, FXWG; repl. OEM #50028-74 7.95 Kickstand spring plate for 84-90 FX, FXST, FXWG; repl. OEM #s 50036-36, 50028-74A 8.95
CHROME KICKSTAND SPRINGS
CABLES
•Available for a wide selection of Big Twin and XL models •Springs are measured from hook to hook; sold each PART # DS-240330 DS-233678 DS-233679
DESCRIPTION For 84-90 FLT, FLHT; 84-90 FXR, FXRS, FXRT; repl. OEM #50011-30 (3.4”) For 91-06 FXST/FLST, 85-98 FLT, 91-10 XL and 95-06 Buell; repl. OEM #50005-85A (3.7”) 86-90 XL; repl. OEM #41836-84 (3.9”)
SUG. RETAIL $3.95 4.95 4.95
TANKS & OIL FILTERS DASHES & GAUGES
UNIVERSAL KICKSTAND MOUNT •CNC-machined from billet steel •Can be welded to any 11/8” diameter tubing •Accepts 52-E84 XL-style kickstands •Made in the U.S.A. PART # DS-111000
BRAKES
DESCRIPTION Universal kickstand mount
SUG. RETAIL $61.95
KICKSTAND WEDGES •4° and 8° kickstand wedges for 84-08 FL models •The 4° wedge allows for a kickstand adjustment when using a 16”, 18” or 21” front wheel and prevents the bike from leaning to the left while utilizing the stock kickstand 0510-0112 •The 8° wedge maintains the stock upright position when using a 23” front wheel with no kickstand modifications required •The 8° also works for a 21” wheel with extended forks •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0510-0112 4° $59.95 0510-0113 8° 59.95
KICKSTAND WEDGE KIT •This kit, designed by Don Hotop, allows you to change the angle of your kickstand at the frame, rather than heating and bending your chrome kickstand to work for lowered bikes •Maintains the original angle of the foot board •6061 billet aluminum construction •Includes both fine- and coarse-thread bolts for early and late models and installation instructions PART # 0510-0028
DESCRIPTION 84-06 FLT, FLHT, FLHS and FLHR models lowered up to 2”
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $43.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
943
SECTION
17
WINDSHIELDS KICKSTAND WEDGE
TOURING
•Aluminum wedge changes the angle of the kickstand so it does not have to be bent •For lowered models only •Sold each •Made in the U.S.A.
6° ANGLE KICKSTAND WEDGE
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
•Plate enables a 6° lean angle adjustment (up or down) on side stands with mounting holes 17/16” apart •CNC-machined from billet with a polished, PART # DESCRIPTION chromed finish 0510-0040 Kickstand wedge •Made in the U.S.A.
SUG. RETAIL $14.95
EASY FIND KICKSTAND EXTENSION
•For use on lowered bikes •Allows you to adjust the angle of your kickstand quickly and easily •Sold each PART # 0510-0090
DESCRIPTION For 84-99 Big Twin (except FL)
SUG. RETAIL $23.95
DS-240021 DS-240022
•Chrome extension makes hard-to-reach kickstands easier to operate •Comes with hardware PART # DS-240021 DS-240022
DESCRIPTION For 86-06 FXST, FLST (except 05-06 FLSTN), 84-06 FLT, FLHR and FLTR models For 93-05 FXD models
SUG. RETAIL $29.95 29.95
easy reach •Comes with rubber bumper, mounting hardware and instructions
NOTE: Kickstand sold separately.
ADJUSTABLE KICKSTAND STOP
NOTE: Must drill 1/4” hole in kickstand. PART # DS-240015
LIGHTING
SUG. RETAIL $22.95
NOTE: Drilling required.
TRANSMISSION KICKSTAND EXTENSION & DRIVELINE •Chrome extension for
ELECTRICAL
DESCRIPTION For 84-99 Big Twin models
KICKSTAND ANGLE PLATE
ENGINE
GASKETS & SEALS
PART # DS-240202
DESCRIPTION For 84-08 FLT/FLHT/FLHR/FLTR and 86-06 Softail models (except 05-06 FLSTN); repl. OEM #50055-90
SUG. RETAIL
$19.95
•Adjustable kickstand stop protects the primary case from the kickstand •Eliminates the need for the glue-on rubber pad •Nylon tip screw with jam nut provides adjustment for proper kickstand position •Made from 5/16” thick high-strength steel PART # DESCRIPTION DS-240212 For all 89-99 Softail models w/ stock kickstand bracket OEM #50018-85
HANDLEBARS, CONTROLS & MIRRORS
SUG. RETAIL $12.95
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
KICKSTAND EXTENSION
KICKSTAND BUMPER
•Made of highly polished stainless steel •Attaches to the stock kickstand and is adjustable to extend outward from 13/4” to 23/4” •Works great with stock covers for easier accessibility of stock kickstands and necessary when using oversized primary covers such as the Barnett billet aluminum cover •Installation is easy without drilling holes •Made in the U.S.A. SUG.
•Rubber bumpers •Sold each to consumer; sold to dealer in 5-pack
PART # DESCRIPTION 0710-0039 For 86-06 FLT/FLHT models and 84-94 FXR models
FRAMES, KICKSTAND SUSPENSION BOOT •Distributes your bike’s & FENDERS weight and prevents sinking into hot asphalt, dirt or grass FOOTRESTS •Sold in pack of 12 & LICENSE PART # DESCRIPTION PLATE FRAMES 0510-0034 Kickstand boot TIRES, TUBES & WHEELS HARDWARE, KICKSTAND BUMPERS CHEMICALS •Easy attachment with double-backed & TOOLS adhesive (included) DS-375631 DESCRIPTION COVERS, PART # SECURITY DS-173388 Genuine James kickstand bumpers (10-pk.) & GENERAL DS-375631 Kickstand bumpers (6-pk.)
944
PART # DS-240008
DESCRIPTION For 89-06 FXST, 95-04 FXDS- Convertible, FXDX, FXDXT 86-00 XL; repl. OEM #62123-66
SUG. RETAIL $1.95 (ea.)
RETAIL $38.95
SUG. RETAIL $7.95 (ea.)
DS-375641
DS-375642
FRAME-MOUNT KICKSTAND BUMPERS •Rubber kickstand bumpers clip to the round frame tubes under the primary cover •Great for custom applications •Sold each PART # DS-375641 SUG. RETAIL $1.95 (ea.) 1.25 (ea.)
DS-375642
DESCRIPTION 11/8” bumper for 91-01 Dyna Glide (except FXDS-CON); repl. OEM #50054-90 1” bumper for 85-00 FLT/FLHT models; repl. OEM #50059-85
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $4.95 4.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE CRUZ COVERS
0520-0785
•Molded polyurethane covers replace OEM parts •Left side features molded bottle-holder that accepts 20 oz. torpedo-style bottles and most 16 oz. bottles; right side covers the starter and wiring •Built-in air deflectors keep engine heat off of the rider’s legs •Ready for paint with PART # minimal prep work •Install easily without tools 0504-0094 •Made in the U.S.A.
DS-373760
CUSTOM SIDE COVER SETS
DESCRIPTION For 95-07 FLT models
SUG. RETAIL $199.95
CHROME SIDE COVERS •Impressively chromed steel side covers are designed to replace the stock black covers •Sold in pairs PART # DESCRIPTION SUG. RETAIL DS-373675 For 84-94/99-00 FXR models $76.95
•Adds a “beefier” look while providing more area to continue your paint scheme •Made of perfectly formed ABS plastic •Covers are designed to mount to rear side panels PART # DESCRIPTION 0520-0786 For 09-10 FLHT/FLHR/FLTR/FLHX 0520-0785 For 97-08 FLT/FLHT/FLHR/FLTR/FLHX DS-373760 For 93-96 FLT/FLHT/FLHR
EXHAUST FUEL/AIR SYSTEMS SUG. RETAIL $199.95 199.95 149.95
•ABS plastic comes ready to sand and paint •Completely cover the triangle portion of the frame •Sold in pairs •Made in the U.S.A. DESCRIPTION For 84-94/99-00 FXR models
SUG. RETAIL $89.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
0504-0002
BEHIND THE ENGINE FILLER PANEL FRAME COVER
CABLES BRAKES
•Show-chromed cover fills the “black hole” behind the rear cylinder and the starter motor •Also hides the gap between the y-frame member •No drilling or modifications required for cruise-control equipped models DESCRIPTION For 97-07 FLHT/FLHR/FLTR models
SWINGARM COVERS/PHANTOM COVERS KIT SUG. RETAIL $104.95
•Easy-to-install chrome covers offer an alternative to downtime and plating •Lighted and unlighted versions available •Both kits include four covers for tube section of swingarm, two upper swingarm covers, two Phantom covers and all necessary hardware •Lighted covers have single-function LEDs that can be wired as auxiliary lights, turn signals or brake lights NOTE: LEDs are not DOT approved.
0520-0404
TRANSMISSION & DRIVELINE
ELECTRICAL
1303-0038
PART # 0504-0111
ENGINE
GASKETS & SEALS
CUSTOM SIDE COVERS
PART # DS-373676
SEATS & SISSY BARS
0520-0784
SIDE COVERS •Stamped-steel construction •Polished and chrome-plated •Replace stock painted covers in minutes; no drilling required •Sold each PART # DESCRIPTION SUG. RETAIL FOR 04-10 XL MODELS 0520-0404 Right side $87.95 0520-0784 Left side 84.95
NOTE: Kit will fit FLSTF, FXSTD or FLSTN models only if stock over-under shotgun exhaust has been replaced with a staggered dual or 2-into-1 system. PART # DESCRIPTION SUG. RETAIL KITS WITH LED PHANTOM COVERS 1303-0086 For 08-10 FXST/FLST (except FLSTF, FLSTN) $199.95 1303-0110 For 06-07 FXST, FXSTB, FXSTC, FXSTS, 07 FLSTF 199.95 0504-0002 For 00-07 FXTSD models 199.95 0504-0018 For 00-05 FXST, 00-07 FLST (except 07 FLSTF, FXSTD and FLSTN) 199.95 1303-0031 For 86-99 Softail 199.95 KITS WITHOUT LED PHANTOM COVERS 1303-0087 For 08-10 FXST/FLST (except FLSTF, FLSTN) 159.95 1303-0038 For 00-05 FXST, 00-07 FLST (except 07 FLSTF, FXSTD and FLSTN) 169.95 1303-0077 For 86-99 FXST 169.95
All part numbers in BOLD MAGENTA are new for 2010.
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
945
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
1303-0033
1303-0032
SWINGARM COVER SET
CHROME SWINGARM COVERS
•Intended for riders who already have Küryakyn’s Phantom Covers or other axle cover kit •Set includes a pair of sleek upper swingarm covers and four easy-to-install covers for the tubular sections of the swingarm NOTE: In some applications there may be a small gap between the tubular swingarm covers and the axle cover.
•Two-piece design for simple, quick installation •Covers all visible parts of the swingarm, even the axles •Sold as a set
PART # 1303-0032 1303-0033
PART # 1303-0088
DESCRIPTION For 00-05 FXST, 00-07 FLST (except FLSTF, FXSTD, FLSTN) For 86-99 Softail
SUG. RETAIL $136.95 129.95
SUG. RETAIL $199.95
DESCRIPTION For 06-10 FXD/FXDWG
0504-0077
GASKETS & SEALS ELECTRICAL LIGHTING 0502-0310
0502-0312
HANDLEBARS, DELUXE NECK COVER KIT CONTROLS •Add brilliance to a dull area with these smooth, quickly installed covers that shroud the neck and extend down the frame & MIRRORS •Cover is enlarged enough on the right side to accommodate the in-line cruise control pull-off switch found on all Road King 02-05 models CABLES BRAKES
•Deluxe kit also includes two snap-on down tube pieces that add coverage almost all the way down to the floorboard mounts •Easy to install PART # 0502-0310 0502-0312
0504-0003
DESCRIPTION For 09-10 FLHT/FLHR/FLTR/FLHX For 08 FLHT/FLHR/FLTR/FLHX
SUG. RETAIL $199.95 199.95
0504-0029
PART # 0504-0077
DESCRIPTION For 95-05 FLT, FLHT, FLTR, FLHR models
SUG. RETAIL $169.95
0504-0029 0504-0029
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
946
NECK COVERS •Chrome-plated, die-cast construction 0504-0158 •Covers the ugly stock welds on frame •Two-piece construction for easy installation •Wiring modifications required on models using the plug-in-style ignition modules that mount on the frame neck
0504-0108
PART # 0502-0311 0504-0003 0504-0109 0504-0029 0504-0108 0504-0158
DESCRIPTION For 07-10 FLSTC, FLSTN, FLSTF For 00-08 FXST (except FXSTD) For 00-07 FXSTD For 00-06 FLSTC, FLSTF and 05-06 FLSTN For 86-99 FLSTC, FLSTF, FLSTN (does not fit FLSTS) For 06-10 Dyna (except FXDWG)
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $79.95 94.95 94.95 84.95 89.95 146.95
NECK COVER SET •Cover up those unsightly stock welds without the hassle and expense of molding and painting •Made of perfectly formed ABS plastic and comes ready to paint •Designed to mount to neck area •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL DS-373759 For 93-07 FLT/ FLHT/FLHR $79.95
SECTION 0504-0159
0504-0078
0502-0074
17
0502-0074
WINDSHIELDS TOURING LUGGAGE
DOWN TUBE COVERS
0502-0075
•The easy way to add a touch of chrome to the front frame down tubes •Simple snap-on installation •Sold as a set PART # 0504-0159 0504-0078 0504-0112
DESCRIPTION For 92-99 FXST/FLST For 00-06 FXST/FLST For 07-10 FXST/FLST
SEATS & SISSY BARS
MID-FRAME COVERS SUG. RETAIL $59.95 59.95 59.95
PART # 0502-0074 0502-0075
0502-0313
EXHAUST
•Quick, easy way to conceal top frame tubes on Softails •Steel construction with chrome-plated, creamy smooth finish •Tuck in behind fender struts and slip up under the fuel tank •Sold in pairs DESCRIPTION For 00-07 FXST/FLST (except FXSTD) For 00-07 FXSTD
FUEL/AIR SYSTEMS SUG. RETAIL $94.95 94.95
ENGINE TRANSMISSION & DRIVELINE
LOWER FRAME COVER 0502-0314
0502-0313
PART # 0504-0079
0504-0030
ELECTRICAL LIGHTING
DESCRIPTION For 95-07 Softail models
SUG. RETAIL $39.95
LOWER FRONT FRAME COVER
MID-FRAME COVERS •Chrome-plated steel covers create a beautiful highlight •Conceal frame welds for a smooth, seamless look •Install in just minutes •Sold in pairs PART # 0502-0314 0502-0313 0504-0030
GASKETS & SEALS
•Eye-catching and easy to install •Fits below Küryakyn’s Boomerang frame cover on the left side of the bike •Not for use with models that have cross-over exhaust •Sold each
DESCRIPTION For 09-10 FLHT/FLHR/FLTR/FLHX models For 08 FLHT/FLHR/FLTR/FLHX models For 97-07 FLHT/FLTR/FLHR models
SUG. RETAIL $119.95 103.95 104.95
•Shrouds the kickstand assembly, front engine stabilizer and footboard mount with beautiful chrome
CABLES
PART # DESCRIPTION SUG. RETAIL 0504-0113 For 91-08 FLT, FLHT, FLHR, FLHX and FLTR w/o fairing lowers $69.95
BRAKES TANKS & OIL FILTERS
DS-280303
DASHES & GAUGES
FENDER-TOSADDLEBAG FILLER PANELS WITH LEDS
RIGHT REAR LOWER FRAME COVER •Stamped chrome lower frame cover bridges the gap between the OEM side cover and the passenger floorboard •Covers up the exposed frame tubes and rubber isolation mount •Sold each PART # 0504-0119
DESCRIPTION For 07-08 FLHT/FLHR/FLTR
SUG. RETAIL $69.95
HANDLEBARS, CONTROLS & MIRRORS
•Panels feature dual-function LEDs •Available with chrome or raw finish •Mount to OEM fender brace •LEDs are not DOT approved; recommended for off-road or show use only •Use of LEDs as marker lights requires a load equalizer (PART #DS-272236 or BLLE02) •Will not work with most bag guards •Made in the U.S.A.
DS-280304
PART # DESCRIPTION SUG. RETAIL FOR 93-08 FLT, FLHT, FLTR AND FLHR (EXCEPT FLHX, FLHRCI, FLHRS/SI) DS-280303 Chrome filler panels (pr.) $327.95 DS-280304 Raw filler panels (pr.) 308.95
All part numbers in BOLD MAGENTA are new for 2010.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
947
SECTION
17 0504-0182
WINDSHIELDS
DS-720121
TOURING LUGGAGE SEATS & SISSY BARS EXHAUST
DS-720129
ONE-PIECE FILLERS •Constructed from 16-gauge steel and E-coated for rust and corrosion resistance and are designed to fill the void between the fender and saddlebags; a minor detail that makes a major impact •Bolts directly to existing mounting locations; works with OEM detachable mounting kits •LED auxiliary light cutouts are laser cut for precision fit; oval cutout for cateye/oval LEDs measures 1.875” L x 1” W and round cutout’s diameter is 1.625”; LEDs sold separately, see LIGHTING SECTION •All are sold in pairs and include all necessary hardware and instructions to install them •Made in the U.S.A.
FUEL/AIR SYSTEMS ENGINE TRANSMISSION FENDER-TO-SADDLEBAG COVERS & DRIVELINE •These covers fill the empty space between GASKETS & SEALS ELECTRICAL LIGHTING
the rear fender and OEM saddlebags; without saddlebag guards •Mount to OEM rear fender braces •Provides additional surfaces to mount marker lights or turn signals •Available in a chrome or raw finish •Made in the U.S.A.
PART # DESCRIPTION FOR 09-10 FLHT, FLHR, FLTR MODELS 0504-0180 No cutouts 0504-0182 W/ round LED cutout 0504-0181 W/ horizontal cateye/oval LED cutout 0504-0183 W/ vertical cateye/oval LED cutout
SUG. RETAIL $379.95 399.95 399.95 399.95
NOTE: Not for use with detachable hardware. PART # DESCRIPTION SUG. RETAIL FOR 93-08 FLT, FLHT, FLTR AND FLHR MODELS (EXCEPT FLHX, FLHRCI, FLHRS, SI) WITHOUT SADDLEBAG GUARDS DS-720121 Chrome covers $139.95 DS-720129 Raw covers 59.95
HANDLEBARS, CONTROLS & MIRRORS 0504-0080
CABLES BRAKES TANKS & OIL FILTERS 0504-0081
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, FLT FILLER PANELS TUBES & •Designed for FLT Baggers with hard bags WHEELS •Fiberglass construction HARDWARE, with gray gel coat finish not work with CHEMICALS •Will detachable accessories & TOOLS •Made in the U.S.A. COVERS, NOTE: Custom installation and some modifications are necessary. DESCRIPTION SUG. RETAIL SECURITY PART # $249.95 & GENERAL 0504-0028 For 95-08 FLT, FLHT, FLTR, FLHR (except FLHX)
948
CURVACEOUS UPPER FILLERS •Accent the line of your fender and hide clutter for a custom look •Steel construction with E-coating, ready to color match paint •Upper fillers mate up to the stock fender/lower filler on Street Glides •Requires removal of stock license plate mount bar •Two versions – smooth for models with or without detachable backrests; slotted for models with detachable TourPak® •Must remove stock license plate mount bar •Made in the U.S.A. NOTE: Can also be used on 95-08 FLT, FLHT, FLHR and FLTR models when used in conjunction with Klock Werks lower filler panels PART # FOR 06-08 FLHX 0504-0080 0504-0081
DESCRIPTION Smooth fillers for use w/ or w/o detachable backrest Slotted fillers for use w/ detachable tour rack pack
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL
$169.95 169.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS Before Fillers
A. Detachable Style Stock-length/+2” Fender Stock-length saddlebags
B.
Smooth Style Stretched rear fender Doublecut saddlebag extensions
C.
D.
Smooth Style Smooth Style Stretched rear fender Stretched rear fender Stock length saddlebags Fullback saddlebag extensions
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
LOWER FILLERS •Constructed from 16-gauge steel and E-coated for rust and corrosion resistance and are designed to fill the void between the lower fender and saddlebags; A minor detail that makes a major impact! Smooth Style •The only steel fillers designed to be used with or without detachables •Detachable style is for use with OEM detachable accessories (available separately) OEM Leather Saddlebags •Great to use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area •LED auxiliary light cutouts are laser cut for precision fit; oval cutout for cateye/oval LEDs measures 1.875” L x 1” W and round cutout’s diameter is 1.625”; LEDs sold separately •Fillers are available in Standard for stock bags; Extended and Extended Plus for use with Klock Werks Benchmark rear fenders and OEM or Klock Werks saddlebags extensions (and rolled Bottom fillers match the look of the bags and serve to line up the fullback bag extensions and Klock Werks stretched fender) •All are sold in pairs and include all necessary hardware and instructions to install them •Made in the U.S.A.
E.
FOR 93-08 FLT, FLHT, FLHR, FLTR MODELS A. FOR USE WITH STOCK-LENGTH FENDER OR KLOCK WERKS +2” FENDERS AND STOCK-LENGTH HARD SADDLEBAGS PART # DESCRIPTION SUG. RETAIL STOCK - SMOOTH STYLE 0504-0090 No LED cutout $99.95 0504-0128 W/ round LED cutout 129.95 0504-0129 W/ horizontal cateye/oval LED cutout 129.95 0504-0130 W/ vertical cateye/oval LED cutout 129.95 STOCK - DETACHABLE STYLE 0504-0091 No LED cutout 99.95 0504-0131 W/ round LED cutout 129.95 0504-0132 W/ horizontal cateye/oval LED cutout 129.95 0504-0133 W/ vertical cateye/oval LED cutout 129.95
B. FOR USE WITH KLOCK WERKS 6” STRETCHED REAR FENDERS AND KLOCK WERKS DOUBLE CUT SADDLEBAG EXTENSIONS PART # DESCRIPTION SUG. RETAIL CONTOUR PLUS - SMOOTH STYLE 0504-0150 No LED cutout $129.95 0504-0151 W/ round LED cutout 129.95 0504-0152 W/ horizontal cateye/oval LED cutout 129.95 0504-0153 W/ vertical cateye/oval LED cutout 129.95 CONTOUR PLUS - DETACHABLE STYLE 0504-0154 No LED cutout 129.95 0504-0155 W/ round LED cutout 129.95 0504-0156 W/ horizontal cateye/oval LED cutout 129.95 0504-0157 W/ vertical cateye/oval LED cutout 129.95
C. FOR USE WITH KLOCK WERKS 6” STRETCHED REAR FENDERS AND STOCK-LENGTH HARD SADDLEBAGS PART # DESCRIPTION SUG. RETAIL CONTOUR - SMOOTH STYLE 0504-0142 No LED cutout $129.95 0504-0143 W/ round LED cutout 129.95 0504-0144 W/ horizontal cateye/oval LED cutout 129.95 0504-0145 W/ vertical cateye/oval LED cutout 129.95 CONTOUR - DETACHABLE STYLE 0504-0146 No LED cutout 129.95 0504-0147 W/ round LED cutout 129.95 0504-0148 W/ horizontal cateye/oval LED cutout 129.95 0504-0149 W/ vertical cateye/oval LED cutout 129.95
D. FOR USE WITH KLOCK WERKS 6” STRETCHED REAR FENDERS AND KLOCK WERKS FULLBACK SADDLEBAG EXTENSIONS PART # DESCRIPTION SUG. RETAIL FULLBACK - SMOOTH STYLE 0504-0134 No LED cutout $129.95 0504-0135 W/ round LED cutout 129.95 0504-0136 W/ horizontal cateye/oval LED cutout 129.95 0504-0137 W/ vertical cateye/oval LED cutout 129.95 FULLBACK - DETACHABLE STYLE 0504-0138 No LED cutout 129.95 0504-0139 W/ round LED cutout 129.95 0504-0140 W/ horizontal cateye/oval LED cutout 129.95 0504-0141 W/ vertical cateye/oval LED cutout 129.95
E. ROLLED BOTTOM FILLER FOR 99-08 FLHRC WITH OEM LEATHER SADDLEBAGS PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION LEATHER - SMOOTH STYLE LEATHER - DETACHABLE STYLE 0504-0120 No cutouts $129.95 0504-0124 No cutouts 0504-0121 W/ round LED cutout 129.95 0504-0125 W/ round LED cutout 0504-0122 W/ horizontal cateye/oval LED cutout 129.95 0504-0126 W/ horizontal cateye/oval LED cutout 0504-0123 W/ vertical cateye/oval LED cutout 129.95 0504-0127 W/ vertical cateye/oval LED cutout
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $129.95 129.95 129.95 129.95
GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
949
SECTION
17
WINDSHIELDS 1405-0091
TOURING LUGGAGE
1405-0121
SEATS & SISSY BARS EXHAUST EXTENDED REAR FENDER COVER
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
•Designed to work with Cycle Visions Extended Saddlebags PART #s 3501-0544 and 3501-0545; sold separately •Fiberglass construction with a recess for Cycle Visions Eliminator Taillight, PART #2010-0662; sold separately •Requires cutting of stock rear fender and purchasing a rear fender brace, PART #1421-0005 or 1421-0006 •Made in the U.S.A. NOTE: Fender cover has no cut-outs for exhaust. PART # DESCRIPTION 1401-0287 For 97-08 FLHT, FLHR, FLHX, FLTR models
SUG. RETAIL $399.95
GASKETS & SEALS ELECTRICAL
DS-720227
BAGGER REAR FENDER COVER/
HANDLEBARS, SADDLEBAG EXTENSION KIT CONTROLS •Developed to fit directly over existing rear fender; & MIRRORS some modification is required
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•Heavy 18-gauge raw steel construction •Designed to fill in and extend the rear of the fender for a street glide look •Extends the fender 4” over OEM •Requires custom mounting; no hardware is included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1405-0121 For 09-10 FLHT/FLHR/FLTR models with hard bags and a 180 rear tire (except 10 FLTRX) $298.95 1405-0091 For 96-07 FLTR/FLHR/FLHT models w/ OEM hard 298.95 bags and OEM 7 1/4” rear fender
CHROME FRAME SIDE COVERS
LIGHTING
CABLES
REAR FENDER EXTENSION AND FILLER PANEL
•Fender cover cleans up that ugly gap between fender and factory saddlebags •Saddlebag extensions can be bolted on, or for custom applications they can be fiberglassed to existing saddlebags •Kit includes one fiberglass fender cover, two fiberglass saddlebag extensions and all necessary mounting hardware •Components are available separately •Parts require finishing and painting •Made in the U.S.A. PART # DS-720227 DS-720229 DS-720240
DESCRIPTION SUG. RETAIL Kit for 97-08 FLT and FLHR models (except FLHX/FLHRS/FLHRCI) $527.95 Fender cover only, 97-08 FLT and FLHR models 339.95 Saddlebag extensions only (pr.) 339.95
•These are the genuine rear frame side covers •Highly polished, then chrome-plated to add a unique, clean look to the right and left rear frame castings •Left side cover has two additional holes at the bottom that allow secure mounting and prevent any rattling PART # DESCRIPTION SUG. RETAIL DS-380511 For 86-99 FXST and FLST $53.95
ENGINE TURNED DESIGN FRAME INSERTS •Unique, eyecatching design •Four-piece set held in place with self-adhesive backs •Made in the U.S.A. PART # 1902-8001
DESCRIPTION For 84-07 FXST/FLST models (except 00-07 FXSTD, FLSTF, 05-07 FLSTN)
DS-380513 DS-373977 FRAMES, SUSPENSION & FENDERS FOOTRESTS BOOMERANG & LICENSE FRAME COVERS chrome PLATE FRAMES •High-quality metal covers TIRES, •Wrap around the front and rear edges TUBES & of the frame for FRAME INSERTS WHEELS complete coverage •Four-piece chrome steel insert set dresses up for use with passenger floorboards any Softail frame HARDWARE, •Not •Fit belt drive Softail models •Held securely in place by special adhesive tape CHEMICALS R.O.C. Design Patent #37113, U.S. Patent #349,266 •Fits neatly into the recessed area of all & TOOLS PART # frame sections DESCRIPTION SUG. RETAIL DESCRIPTION For 00-07 FXSTD w/ low exhaust $104.95 PART # COVERS, 1906-0001 For 00-07 FLSTF 104.95 DS-380510 For 84-07 Softail models (except SECURITY DS-373977 00-07 FLSTF/FXSTD, 05-07 FLSTN) For 86-99 FXST, FXSTS, FLST models 104.95 & GENERAL DS-380513
950
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $104.95
SUG. RETAIL $15.95
SECTION
17
WINDSHIELDS
DS-222998
TOURING CUSTOM TOP TREES •Chrome-plated billet aluminum •Allows the use of most handlebars or risers with the standard 3.5” bolt center •Made in the U.S.A. PART # DS-222998 DS-333998
DESCRIPTION For 88-06 FXSTS For 97-03 FLSTS, 05-07 FLSTSC
LUGGAGE
SUG. RETAIL $179.95 179.95
SEATS & SISSY BARS
DS-222926
CHROME 41MM WIDE GLIDE-STYLE TRIPLE TREES
EXHAUST
•Available in radius smooth design •Features cam locks that secure the fork assembly in the trees and a new adjustable headlight mount •Includes top and bottom aluminum trees, steering stem and Allen top bolt, headlight mount and necessary hardware •Neck bearings, races, dust shields, bearing cups (if used) and fork stop must be purchased separately •Made in the U.S.A. PART # DESCRIPTION DS-222036 For 84-99 Wide Glide-style 41mm forks
FUEL/AIR SYSTEMS
DS-222949
“MASSIVE GLIDE” TREES
SUG. RETAIL $498.95
•This innovative chrome triple tree set from Ness creates the illusion of an inverted fork using your stock fork legs •Chrome-plated tree assembly •Comes complete with trees, covers, stem, headlight mount and all necessary hardware •Made in the U.S.A. PART # DESCRIPTION FOR 84-99 WIDE GLIDE WITH 41MM FORKS DS-222926 Grooved DS-222949 Radius
ENGINE
SUG. RETAIL $1,049.95 1,049.95
41MM WIDE GLIDE TRIPLE TREES
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
•Billet aluminum construction •Raked trees feature a flush top design that eliminates fork tube nuts •Come in smooth or ball-milled finish •Raked triple trees designed for custom frames with a 38° or more rake; not designed for stock V-Twin applications •Trees accept Pro-One fork stop kits PART #DS-222842 or DS-221926 (sold separately) •Available in chrome and black anodized finish; 106210 with or without integral turn signals •Made in the U.S.A.
0408-0096
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
0408-0102
CABLES
NOTE: No fork locking capabilities. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications. Not recommended for use on rubber mounted chassis.
BRAKES
FOR 84-10 FXST/FLST AND CUSTOM APPLICATIONS PART # CHROME 106210 106270 106500 106560 106800 106860 2040-0005
DESCRIPTION
SUG. RETAIL
3° rake, smooth 3° rake, smooth w/ turn signals 5° rake, smooth 5° rake, smooth w/ turn signals 7° rake, smooth 7° rake, smooth w/ turn signals Repl. amber lens (pr.)
$543.95 568.95 543.95 568.95 543.95 568.95 7.95
PART # DESCRIPTION BLACK ANODIZED 0408-0088 0° rake, smooth 0408-0090 0° rake, smooth w/signals 0408-0096 3° rake, smooth 0408-0098 3° rake, smooth w/ turn signals 0408-0100 5° rake, smooth 0408-0102 5° rake, smooth w/ turn signals 0408-0104 7° rake, smooth 2040-0005 Repl. amber lens (pr.)
41MM RAKED TRIPLE TREES •CNC-machined from billet aluminum •Feature 3° rake •Made in the U.S.A. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometery must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications. PART # DESCRIPTION SUG. RETAIL FOR 86-10 FLST, FLSTC, FLSTF WITH STOCK TINS AND NACELLE 0408-0238 Smooth chrome $649.95 0408-0239 Finned black 799.95 0408-0240 Finned chrome 799.95
0408-0238
All part numbers in BOLD MAGENTA are new for 2010.
0408-0239
SUG. RETAIL $479.95 505.95 543.95 568.95 543.95 568.95 543.95 7.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
951
SECTION
17
WINDSHIELDS 2406-5415
TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
0408-0281
DS-222530
DS-222230
41MM TRIPLE TREES •Chrome-plated, CNC-machined billet aluminum •Stem threads into underside of top triple tree for cleaner look •Available in a smooth or radius groove design •Made in the U.S.A. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications. PART # DESCRIPTION FOR 84-10 FXST, FXWG AND CUSTOM APPLICATIONS 2406-7417 7° Elite smooth; chrome 2406-5415 5° Elite smooth; chrome 0408-0281 5° Elite smooth; night series DS-222530 0° Elite; chrome
SUG. RETAIL $598.95 598.95 598.95 514.95
PART # DESCRIPTION FOR 84-10 FXST, FXWG AND CUSTOM APPLICATIONS (CONT) DS-222230 7° Elite; chrome DS-222231 5° Elite; chrome FOR 93-05 FXDWG 2406-5416 5° Elite smooth; chrome
SUG. RETAIL $598.95 598.95 598.95
0408-0219
GASKETS & SEALS 0408-0259
ELECTRICAL LIGHTING GOTHIC 41MM
ELITE 49MM TRIPLE TREES
•Unique design features a fork stem that threads in from the bottom and hidden stainless steel fork tube caps for a clean, uncluttered top tree •External fork stops included •Lower tree is also drilled and tapped for an optional internal fork stop •5° rake styles •All hardware is stainless steel •Made in the U.S.A.
NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications.
HANDLEBARS, TRIPLE TREE CONTROLS •Manufactured from billet with a & MIRRORS aluminum chrome-plated finish CABLES BRAKES TANKS & OIL FILTERS
NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications.
DASHES & GAUGES
PART # 0408-0109
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
952
DESCRIPTION For 84-10 FXST, FXWG and custom applications; 5° rake
SUG. RETAIL $722.95
•Manufactured from billet aluminum •Available with 3° and 5° rake •Bottom headlight mount •Has fork lock capability •All hardware is stainless steel •Available with a chrome-plated or Night Series finish •Made in the U.S.A.
PART # DESCRIPTION FOR 06-10 FXD MODELS 0408-0219 3° rake, mid glide; chrome 0408-0259 3° rake, mid glide; night series 0408-0220 5° rake, mid glide; chrome 0408-0260 5° rake, mid glide; night series FOR 06-10 FXDWG MODELS 0408-0221 3° rake, wide glide; chrome 0408-0223 5° rake, wide glide; chrome
SUG. RETAIL $640.95 640.95 640.95 640.95 640.95 640.95
49MM WIDE GLIDE TRIPLE TREES 0408-0213
•Precision machined from 6061 T-6 aluminum •For use in custom applications when installing a complete OEM 49mm front end assembly on a 84-10 FXST or custom style frame •Available in chrome or polished finish •Made in the U.S.A. by Custom Cycle Engineering PART # 0408-0213 0408-0214
DESCRIPTION 49mm Wide Glide polished triple tree 49mm Wide Glide chrome triple tree
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $773.95 610.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
CHROMED ALUMINUM TRIPLE TREES
NOTE: Does not include stem nut, stem nut washer or fork pinch bolts.
•Precision-machined from 6061 T-6 aluminum, polished, then chrome-plated for a show-quality finish •Include a fork stem bolt and washer, internal fork stop kit, stem nut cover and all necessary hardware •Headlight mounting bracket must be ordered separately; see page 954 •Made in the U.S.A. by Custom Cycle Engineering
PART # DESCRIPTION SUG. RETAIL 1809-2150 FXSTD triple tree; repl. OEM #s 45769-00, 45475-00 $336.95
PART # DS-222942
FXSTD-STYLE TRIPLE TREE •Chrome tree includes upper and lower trees and fork stem •Accepts 41mm fork legs and has lock capability
DESCRIPTION For 84-99 FXST, FXWG
TRANSMISSION & DRIVELINE SUG. RETAIL $561.95
GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
DS-222038
BRAKES TANKS & OIL FILTERS DASHES & GAUGES CHROME 39MM CONVERSION KITS
DS-222939
CHROME FL-STYLE TRIPLE TREE •Forged steel construction and highly chromed •A distinctive addition to any Harley Big Twin model with FXST, FXWG and FL fork tubes (41mm) NOTE: These do not allow fork-lock capability. PART # DS-222939
DESCRIPTION Smooth style
SUG. RETAIL $269.95
•Available in Wide Glide and Mid-Glide styles •Feature smooth radius design •Conversion kits include top and bottom aluminum trees, steering DS-222957 stem, top bolt, headlight mount, axle, axle spacer, disc spacer and fender spacers •Cam locks secure the fork assembly in the radius design trees •Radius trees include an adjustable-style headlight mount •Made in the U.S.A. NOTE: For dual-disc models you must order disc spacer. PART # DESCRIPTION FOR 87-99 WIDE GLIDE DS-222039 Radius smooth triple trees DS-222958 Disc spacer for dual-disc application (1.440”) FOR 87-99 MID-GLIDE DS-222038 Radius smooth triple trees DS-222957 Disc spacer for dual-disc application (.718”)
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $629.95 84.95 629.95 79.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
953
SECTION
17
WINDSHIELDS TOURING 0408-0208
LUGGAGE
0408-0209
SEATS & SISSY BARS DS-222828
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING
49MM WIDE GLIDE TRIPLE TREE CONVERSION KITS •Precision-machined from 6061 T-6 aluminum, polished, then chromeplated for a show-quality finish •Include triple trees, a fork stem bolt and washer, internal fork stop kit, stem nut cover, axle, disc spacer and all necessary hardware •Headlight mounting bracket must be ordered separately •Made in the U.S.A. by Custom Cycle Engineering PART # 0408-0208 0408-0209 0408-0210 0408-0211 0408-0212 0408-0282
HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION 49mm conversion 49mm conversion 49mm conversion 49mm conversion 49mm conversion 49mm conversion
for for for for for for
91-99 00-03 04-05 88-94 00-03 06-10
SUG. RETAIL $765.95 765.95 765.95 765.95 765.95 765.95
Dyna Glide Dyna Glide Dyna Glide FXR, 88-99 XL XL FXD
•Truly unique looks – turns any 87-03 narrow glide front end DS-222834 DS-280291 into a mid-glide front end, which is between a narrow glide and a Wide Glide •Precision machined from 6061 T-6 aluminum, polished, then chrome-plated for a show-quality finish •Include an Internal Fork Stop system that fits stock Harley or any other aftermarket frame; also include neck stem, top nut cover, axle, axle spacer and rotor spacer •PART #DS-222828 comes equipped with external locking device •For models with dual-disc applications, order an extra disc spacer; sold separately •Made in the U.S.A. by Custom Cycle Engineering SUG. PART # DESCRIPTION RETAIL DS-222518 39mm mid-glide kit for 00-03 Dyna Glide models $704.95 DS-222829 39mm mid-glide kit for 91-99 Dyna Glide models 704.95 DS-222517 39mm mid-glide kit for 00-03 FXR and 00-03 XL models 704.95 DS-222828 39mm mid-glide kit for 87-94 FXR and 88-99 XL models 704.95 DS-222997 Disc spacer for 39mm 87-99 dual-disc applications (.940”) 85.95 DS-280291 Stock narrow glide headlight/visor mount brackets for rubber-mount risers 49.95 DS-222834 Fender spacers for 39mm forks .95” wide 59.95
DS-223010
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
954
39MM BILLET ALUMINUM WIDE GLIDE TRIPLE TREE CONVERSION KITS •Precision chrome-plated 6061 T-6 billet aluminum triple trees •Kit includes triple trees with internal fork stop, axle, axle spacer, rotor spacer and stem nut •Made in the U.S.A. by Custom Cycle Engineering PART # DS-222516 DS-222902 DS-222515 DS-223010 DS-222502 DS-222941 DS-285008 DS-285009 DS-222908
CHROMED ALUMINUM MID-GLIDE CONVERSION KITS
DS-285008
DS-285009
INDICATOR LIGHT PANEL
DESCRIPTION For 00-03 Dyna Glide models For 91-99 Dyna Glide models For 00-03 FXR and XL models For 87-94 FXR and 88-99 XL models Disc spacer for 00-03 dual-disc applications (1.440”) Disc spacer for 87-99 dual-disc applications (1.440”) Short bottom-mount headlight bracket Long bottom-mount headlight bracket Fender spacers for 39mm Wide Glide fork kits
SUG. RETAIL $704.95 704.95 704.95 704.95 85.95 85.95 53.95 53.95 59.95
•Chrome panel encapsulates the stock indicator lights •Allows for a neat and functional method of mounting indicator lights •Polarizing plate is provided for those lights with symbols •Fits neatly into the oval hole on Custom Cycle Engineering’s top triple trees •Made in U.S.A. by Custom Cycle Engineering PART # DS-222836
DESCRIPTION For PART #s DS-223010, DS-222828 and DS-222829
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $76.95
SECTION
17
WINDSHIELDS 39MM TRIPLE TREE CONVERSION KITS
2406-3906 2406-2046
TOURING
•Chrome-plated CNC-machined T-6 billet aluminum with Elite, Elite smooth, Smooth and Gothic design •Available with standard (0°), 3° or 5° rake triple trees with top OEM style or bottom headlight mount style •Kits include upper and lower trees, stem with nut, fork stop, axle with spacers, fender and rotor spacers •Accept stock fork assembly, front fender, front wheel and headlight •Neck post bearings and races are not included •Include a single disc spacer •Made in the U.S.A.
0408-0150
LUGGAGE SEATS & SISSY BARS EXHAUST
NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications.
FUEL/AIR SYSTEMS
2406-2053
TOP HEADLIGHT MOUNT STYLE ELITE STYLE PART # DESCRIPTION FOR 04-05 FXD 0408-0057 0° rake, Wide Glide FOR 00-03 FXD 2406-3906 0° rake, Wide Glide 2406-2412 3° rake, Wide Glide FOR 08-10 XL 0408-0277 0° rake, Wide Glide 0408-0272 3° rake, Wide Glide FOR 04-07 XL 0408-0081 3° rake, Wide Glide FOR 00-03 XL 2406-2414 3° rake, Wide Glide FOR 87-99 XL, 87-94, 99 FXR 2406-3903 0° rake, Wide Glide
SUG. RETAIL $823.95 823.95 842.95 823.95 842.95 842.95 842.95 823.95
ELITE SMOOTH STYLE PART # DESCRIPTION FOR 04-05 FXD 0408-0070 3° rake, Wide Glide FOR 91-99 FXD 2406-2405 3° rake, Wide Glide FOR 08-10 XL 0408-0262 3° rake, Mid Glide 0408-0274 3° rake, Wide Glide FOR 04-07 XL 0408-0080 3° rake, Mid Glide 0408-0082 3° rake, Wide Glide FOR 00-03 XL 2406-2415 3° rake, Wide Glide FOR 87-99 XL, 87-94, 99 FXR 2406-2403 3° rake, Mid Glide 2406-2407 3° rake, Wide Glide
SUG. RETAIL $842.95 842.95
SMOOTH STYLE PART # DESCRIPTION FOR 04-05 FXD 0408-0058 0° rake, Wide Glide FOR 04-07 XL 0408-0074 0° rake, Wide Glide
SUG. RETAIL $823.95 823.95
842.95 842.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
842.95 842.95
ELECTRICAL
842.95 842.95 842.95
LIGHTING
BOTTOM HEADLIGHT MOUNT STYLE ELITE STYLE PART # DESCRIPTION SUG. RETAIL FOR 00-03 FXD 2406-2053 3° rake, Wide Glide $842.95 FOR 08-10 XL 0408-0276 0° rake, Wide Glide 823.95 0408-0271 3° rake, Wide Glide 842.95 FOR 04-07 XL 0408-0085 3° rake, Wide Glide 842.95 FOR 87-99 XL, 87-94, 99 FXR 2406-2047 3° rake, Wide Glide 842.95
ELITE SMOOTH STYLE PART # DESCRIPTION SUG. RETAIL FOR 00-03 XL 2406-2054 3° rake, Wide Glide $842.95 FOR 87-99 XL, 87-94, 99 FXR 2406-2042 3° rake, Mid Glide 842.95 2406-2046 3° rake, Wide Glide 842.95 SMOOTH STYLE PART # FOR 08-10 XL 0408-0264 0408-0261 0408-0278 0408-0273 FOR 04-07 XL 0408-0084 0408-0086
PART # DESCRIPTION DISC SPACERS FOR DUAL-DISC APPLICATIONS DS-222167 For 00-03 Wide Glide (1.405”) DS-222170 For 87-99 Wide Glide (1.405”)
DESCRIPTION 0° 3° 0° 3°
rake, rake, rake, rake,
SUG. RETAIL
Mid Glide Mid Glide Wide Glide Wide Glide
$823.95 842.95 823.95 846.95
3° rake, Mid Glide 3° rake, Wide Glide
842.95 846.95
SUG. RETAIL $109.95 109.95
GOTHIC STYLE PART # DESCRIPTION SUG. RETAIL FOR 04-05 DYNA 0408-0150 5° rake, Wide Glide $869.95 FOR 08 XL 0408-0265 0° rake, Mid Glide 869.95 0408-0263 3° rake, Mid Glide 869.95 0408-0266 5° rake, Mid Glide 869.95 0408-0279 0° rake, Wide Glide 869.95 0408-0275 3° rake, Wide Glide 869.95 0408-0280 5° rake, Wide Glide 869.95 FOR 04-07 XL 0408-0129 5° rake, Mid Glide 869.95 0408-0141 3° rake, Wide Glide 869.95 0408-0147 5° rake, Wide Glide 869.95 FOR 00-03 XL 0408-0128 5° rake, Mid Glide 869.95
PART # DESCRIPTION DISC SPACERS FOR DUAL-DISC APPLICATIONS (CONT) DS-222168 For 00-03 Mid Glide (.707”) DS-222169 For 87-99 Mid Glide (.707”)
49MM WIDE-GLIDE CONVERSION KITS •Manufactured from billet aluminum •Available with 3° and 5° rake •Include triple trees, rotor spacer, fender spacers, axle spacers, axle and instructions •Available with a chrome-plated or Night Series finish •Made in the U.S.A. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications. PART # DESCRIPTION FOR 08-10 FXD MODELS 0408-0267 3° rake; chrome 0408-0268 3° rake; night series 0408-0269 5° rake; chrome 0408-0270 5° rake; night series
SUG. RETAIL $846.95 846.95 846.95 846.95
PART # DESCRIPTION FOR 06-07 FXD MODELS 0408-0222 3° rake; chrome 0408-0224 5° rake; chrome
SUG. RETAIL $846.95 846.95
All part numbers in BOLD MAGENTA are new for 2010.
0408-0224
SUG. RETAIL $109.95 109.95
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
955
SECTION
17
WINDSHIELDS 1809-8001
TOURING 1809-8002
39MM CHROME STEEL WIDE GLIDE-STYLE SEATS & TRIPLE TREE KITS SISSY BARS CONVERSION •Converts 39mm narrow
LUGGAGE
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
DS-222964
glide to Wide Glide width on single-disc Dyna Glide, FXR and XL models DS-222943 •Fork tubes are clamped through the upper and lower trees with pinch bolts •Top tree accommodates the stock handlebar dampers; lower tree locks the front fork assembly to the frame •Kits include chromed steel upper and lower trees, fork stops, one aluminum disc spacer (1.440”), 10 socket head screws, axle spacers, one axle and a crown or top nut •Made in the U.S.A. by Custom Cycle Engineering PART # DS-222943 DS-222951 DS-222944
DESCRIPTION Wide Glide kit for single disc 87-99 FXR and XL Wide Glide kit for single disc 91-99 Dyna Glide Chrome headlight mount brackets to mount OEM headlight/visor to PART #s DS-222943/DS-222951
DS-222932
DS-222933
SUG. RETAIL $47.95 47.95
DS-222842
HANDLEBARS, CONTROLS & MIRRORS
DASHES & GAUGES
71.95
•Forks stops available for narrow FX, XL or split tanks •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION DS-222932 Narrow DS-222933 Split
LIGHTING
TANKS & OIL FILTERS
SUG. RETAIL $663.95 663.95
•Allow the use of narrow glide 19” or 21” wheel (found on FX, FXR, FXD and XL models) to be installed in a 41mm Wide Glide front end •Include aluminum disc spacer (second spacer for dual disc available), socket head screws, axle spacer and axle •Spacer and axle are cadmium plated; disc spacer is chrome plated •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1809-8001 Conversion kit for 00-06 single disc (except 04-06 FXD models) $177.95 1809-8002 .8750” disc spacer (required for dual-disc applications on 00-06 models) 85.95 DS-222964 Conversion kit for 84-99 single disc 177.95 DS-222963 1.050” spacer (required for dual-disc applications on 84-99 applications) 85.95
FORK STOPS FOR WIDE GLIDE
ELECTRICAL
BRAKES
DS-222944
NOTE: Lower tree is drilled to accept bottom-mount headlight mount.
GASKETS & SEALS
CABLES
NARROW-TO-WIDE GLIDE CONVERSION KITS
FORK STOP KITS •Work on all Pro-One triple trees and many others •Installation on other trees may require some drilling •Available in two styles •Made in the U.S.A. PART # FOR 84-88 BIG TWIN MODELS DS-222842 FOR 89-99 FXST/FLST AND 93-95 DS-221926
UNIVERSAL FORK STOP DS-221926 DESCRIPTION Hide-Away fork stop kit FXDWG MODELS Internal fork stop kit
SUG. RETAIL $116.95 88.95
•Polished stainless steel construction •Has two pinch-type stops on a horseshoe bracket that bolts to the lower triple tree •For custom applications •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-222968 Fork stop $59.95
FRAMES, SUSPENSION & FENDERS STEERING STEM 22-1032 FOOTRESTS BEARINGS AND KITS •PART #22-10320 neck post bearing & LICENSE and race complete replacement set 0410-0090 PLATE FRAMES (includes two bearings, two races and two dust seals) TIRES, •Neck post bearing/race set and TUBES & neck post bearing also WHEELS available individually PART # DESCRIPTION SUG. RETAIL HARDWARE, CHROME ADJUSTABLE FOR 85 FX; 85-86 FXWG; 84-10 FXST, FLST; 86-10 XL, 84-94 FXR; 91-10 DYNA GLIDE, CHEMICALS STEERING STOP from billet aluminum, chrome finish 84-10 FLT, FLHT, FLTR, FLHR AND 02-10 V-ROD & TOOLS •Machined •Made in the U.S.A. 22-1032 Neck post bearing and race set; repl. OEM #s 48300-60 bearing and 48315-60 race $22.95 DESCRIPTION SUG. RETAIL COVERS, PART # 0410-0090 Bearing and race set 9.95 SECURITY DS-222874 For most 84-99 Neck post bearing only; repl. OEM #48300-60 (ea.) 6.95 Wide Glide models $62.95 0410-0091 & GENERAL
956
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
NECK POST BEARING AND RACES •Genuine Timken® brand •Sold individually for various H-D models •Made in the U.S.A. PART # DESCRIPTION FOR 85 FX; 85-86 FXWG; 84-10 FXST, FLST; 86-10 XL, 84-94 FXR; 91-10 DYNA GLIDE, 84-10 FLT, FLHT, FLTR, FLHR AND 02-10 V-ROD DS-222700 Timken bearing and race set DS-222855 Neck post bearing only; repl. OEM #48300-60 (ea.) DS-222860 Race only; repl. OEM #48315-60 (ea.)
WINDSHIELDS SUG. RETAIL
TOURING $13.95 10.95 5.95
LUGGAGE SEATS & SISSY BARS
1305-0700
DS-222777
DS-222800
STEERING STEM BEARING ADJUSTING NUTS •Adjusting nuts are available in a chrome finish with dust cover or a zinc finish without a dust cover
NECK POST BEARING CUPS •Chrome Timken-type bearing cups •Cups sold in pair, races sold each
NECK POST BEARING KIT •Includes two Timken neck post bearings, two chromed bearing cups and two chromed dust covers SUG. PART # DESCRIPTION RETAIL 0410-0018 For 85 FX; 85-86 FXWG; 84-88 FXST and FLST models $104.95
PART # DESCRIPTION SUG. RETAIL FOR 85 FX, 85-86 FXWG AND 84-88 FXST/FLST 1305-0700 Chrome bearing cups w/ races installed (pr.) $44.95 DS-222800 Chrome bearing cups w/o races installed (pr.) 27.95 DS-222860 Race (ea.) 5.95
PART # DESCRIPTION SUG. RETAIL FOR 84-10 BIG TWIN AND 00-10 FXST/00-05 FXDWG MODELS DS-222776 Chrome nut w/ dust cover; repl. OEM #48330-86A (ea.) $19.95 DS-222777 Zinc nut w/o dust cover; repl. OEM #48332-48B/C (ea.) 8.95
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING
2401-0117
STEM BOLT KIT
FORK STEM DUST COVERS •Upper and lower set of zinc-plated dust covers •For use with Timken bearings •Sold in pairs
STEM NUT LOCK WASHERS •Stem nut lock washers for triple trees; replaces OEM #45717-63 •Sold in 10-pk. •Made in the U.S.A. PART # DS-222158
DESCRIPTION For 84-10 Wide Glide models
SUG. RETAIL $17.95
PART # DESCRIPTION DS-222961 For 84-10 Big Twin (except 06-10 Dyna Glide) models; repl. OEM #s 48361-80/48365-48A
2401-0118
SUG. RETAIL
$6.95
•Zinc-plated stem bolt with washer •Chrome-plated stem cap available separately •Made in the U.S.A.
SUG. PART # DESCRIPTION RETAIL FOR 89-10 FLST, FXR, FXD AND XL MODELS 2401-0117 Stem bolt and washer kit; repl. OEM #4453 / 6655 $9.95 2401-0118 Chrome plated stem cap 9.95
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
0410-1008 0410-1009
0410-0110
STEERING STEM BOLT AND TRIM COLLAR FOR XL, FXD AND FXR MODELS
STEM NUTS
•Replace that crude “hardware store” look on your Sportster with one of these steering bolt and trim washer kits •Features a high-strength alloy Allen head cap screw surrounded by a CNC-machined billet aluminum trim collar •Available in your choices of black and clear anodized, or chrome finishes •The black or clear units look great with black triple trees •Our chrome plated version looks great on polished or PART # DESCRIPTION SUG. RETAIL chrome triple trees FOR 87-10 FXD, FXR AND XL MODELS •Installs in minutes 0410-0108 Black anodized $39.95 with a 1/2” 0410-0109 Chrome-plated 42.95 Allen wrench 0410-0110 Clear anodized 39.95 •Made in the U.S.A.
•Chrome-plated replacement stem nuts for a variety of stock and custom front ends and triple trees •Sold individually SUG. PART # DESCRIPTION RETAIL FOR 85-10 FL, 85-86 FXWG, 84-10 FXST/FXSTC, 93-08 FXDWG DS-193009 Acorn nut; (repl. OEM #45718-60) $131.95 FOR 85 FX, 85-87 FXR/FXRS/FXRT AND 85-87 XL DS-193619 Hex nut; (repl. OEM #45718-71) 23.95
All part numbers in BOLD MAGENTA are new for 2010.
STEERING STEM BOLT COVER •Billet aluminum construction with a chome-plated finish •Fits over steering stem bolt •Sold each SUG. PART # DESCRIPTION RETAIL 0410-0100 For 87-10 XL, FXD and FXR models w/ 39mm forks $9.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
957
SECTION
17 CHROME FORK
WINDSHIELDS STEM NUT CAP
•Sold separately •Replaces OEM #45670-80 •Made in the U.S.A.
TOURING
PART # 1913-3001
DESCRIPTION Most 84-10 Wide Glides
SUG. RETAIL $13.95
0410-0092
0410-0093
0410-0094
0410-0095
FORK STEM CAP NUTS •Quality billet aluminum construction •Chrome-plated •Sold each •Made in the U.S.A. PART # DESCRIPTION FOR 84-10 WIDE GLIDE MODELS (EXCEPT 06-10 FXDWG) 0410-0092 Warrior 0410-0093 Speed mill 0410-0094 Reflections 0410-0095 Nasty
DS-222911
DS-222910
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING
DS-222898
SUG. RETAIL $39.95 39.95 39.95 39.95
CHROME FORK SLIDER COVERS
CHROME FORK TINS AND SLIDER COVERS
•Sold in pairs
•High-quality chromed reproduction fork tins •Slider covers can also be purchased separately
NOTE: Bottom portion of slider covers may need to be formed slightly to clear lower legs and fender.
NOTE: Models equipped with front passing lights may need a hole drilled in the rear panel for on/off switch.
PART # DS-222937
NOTE: Always check slider covers for proper clearance.
DESCRIPTION Std. (61/2”) for 84-88 FLT, FLHT models; repl. OEM #45964-49
NOTE: Bottom area of slider covers may need to be formed slightly to clear lower legs and fender. PART # DESCRIPTION SUG. RETAIL FOR ALL 86-08 FLST MODELS DS-222910 3-piece fork tins; repl. OEM #67808-86, 67816-86, 67820-86 $92.95 DS-222911 5-piece fork tins; repl. OEM #67808-86, 67816-86, 67820-86, 45964-86 124.95 DS-222898 Chrome slider covers; repl. OEM #45964-86 (pr.) 38.95
SUG. RETAIL $39.95
0411-0003
0411-0004
HANDLEBARS, CONTROLS & MIRRORS
0411-0001
RETRO FORK BOOT COVERS
CABLES 0411-0002
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
FORK BELLOWS •CNC-machined from billet aluminum •Sold in pairs •Made in the U.S.A. NOTE: When installing on FLST models or other models with a custom front fender, check fender clearance before operating the motorcycle. PART # DESCRIPTION SUG. RETAIL FOR 84-10 FLT, FLHT AND 86-10 FLST MODELS 0411-0001 Black $299.95 0411-0002 Chrome 299.95 0411-0009 Black diamond-edge 399.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS WIND & LICENSE GUARDS PLATE FRAMES •Chrome plated •Mount easily to front TIRES, fork brackets TUBES & wind away WHEELS •Deflect from legs and feet HARDWARE, •Made in the U.S.A. CHEMICALS DESCRIPTION & TOOLS PART # 0412-0097 For 84-10 FLHT/FLHR/FLHS; repl. OEM #58121-85B COVERS, Not for models equipped with fairing SECURITY & GENERAL lowers or lighted fork slide kit.
SUG. RETAIL
1
1
958
0411-0009
$60.95
•Replaces OEM lower fork leg covers •Machined from forged 6061 T-6 billet aluminum •Available in chrome, black anodize and black anodize with diamond cut edges PART # DESCRIPTION FOR 86-10 FLST/C/N, FLHR, FLTR, FLT AND 90-10 FLSTF 0411-0003 Chrome 0411-0004 Black 0411-0007 Black diamond cut FOR 86-10 FLHT AND 06-10 FLHX 0411-0005 Chrome 0411-0006 Black 0411-0008 Black diamond cut
0411-0007 SUG. RETAIL $219.95 219.95 299.95 219.95 219.95 299.95
FRONT FORK AIR BAFFLE
CHROME LOWER TRIPLE TREE COVER
•Chrome-plated stamped steel •Designed to deflect the elements away from the driver PART # DESCRIPTION SUG. RETAIL DS-222979 For 84-10 FLT and FLHT; repl. OEM #58520-79B $21.95
•Used to cover up the casting on the lower triple tree PART # DESCRIPTION SUG. RETAIL DS-222139 For 85-99 FXWG, FXST/C; repl. OEM #s 67773-80 and 67773-80A $21.95
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
WINDSHIELDS TOURING LUGGAGE
CUSTOM WIDE SPRINGER FRONT FORKS •Classic springer looks with quality second to none from the premier springer manufacturer •Wide springer without shock features mounting points for dual disc brakes; no front fender mounting points •Wide springer with shock has a front fender mount similar to the 88-92 FXSTS •Distance between rear legs is 85/16”; outside width is 91/2” •Forks come assembled and include fork neck, top nut, crown nut, riser-style top clamp and inner springs •Both springers use standard 1” neck bearings •Require use of the Paughco axle, available separately; fork recommended for 21” wheels only •Require 1/2-20 riser stud/bolt NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25” stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of an FXSTS springer fork would be +3” over stock (28” total).
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE P-181-ST
P-S181-ST
TRANSMISSION & DRIVELINE
P-181-3
FOR ALL 84-10 36-10 BIG TWINS (EXCEPT FLT, FLHT, FLHR, FLTR, 04-10 04-07 FXD/FXDWG) AND ALL 86-03 82-03 XL MODELS PART # DESCRIPTION WIDE SPRINGER W/O SHOCK P-181-ST Standard; 25” L P-181-3 +3” over stock; 28” L
SUG. RETAIL $1,384.95 1,384.95
PART # DESCRIPTION WIDE SPRINGER W/ SHOCK P-S181-ST Standard; 25” L P-S181-3 +3” over stock; 28” L
SUG. RETAIL $1,619.95 1,619.95
PART # AXLES P-186B1 P-186A1
DESCRIPTION 3/4” 3/4”
axle kit; OEM brake axle kit; PM brake
SUG. RETAIL
GASKETS & SEALS
$97.95 97.95
ELECTRICAL 1809-2610
1809-2613
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
1809-2619
BRAKES TANKS & OIL FILTERS 1809-2612
DASHES & GAUGES NARROW SPRINGER FORKS WITH TAPERED REAR OVAL LEGS
1809-2617
•Forks come complete with axle, axle spacers, top nut, crown nut and top triple tree (for stock-style handlebar risers) •Do not include shocks or fender mounts •Available in three lengths: 30”, 33” and 36” •Made in the U.S.A.
TAPERED LEG WIDE SPRINGER FRONT FORKS •Feature a tapered leg design like that found on the new-style OEM springer •Springer forks come in seven lengths and do not have a shock or fender mounts •The 42”, 45” and 48” springers have a built-in 3° rake so you have less front-end flop •Each fork includes an axle, axle spacers, top nut, crown nut and top triple tree (for stock-style handlebar risers) •Made in the U.S.A.
NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot.
NOTE: Overall length is measured from the top of the top clamp to the center of the rear leg pivot.
NOTE: For use with a narrow glide wheel assembly only. PART # DESCRIPTION SUG. RETAIL FOR 84-10 FXST, FLST, 84-94 FXR, 86-03 XL AND MOST CUSTOM FRAMES THAT USE A 1” NECK BEARING 1809-2618 30” springer fork $2,311.95 1809-2619 33” springer fork 2,376.95 1809-2620 36” springer fork 2,439.95
PART # DESCRIPTION FOR 84-10 FXST, FLST, 84-94 FXR, 86-03 XL AND MOST CUSTOM FRAMES THAT USE A 1” NECK BEARING 1809-2610 27” springer 1809-2612 33” springer 1809-2613 36” springer 1809-2614 39” springer
SUG. RETAIL
$2,248.95 2,376.95 2,440.95 2,504.95
SUG. PART # DESCRIPTION RETAIL FOR 84-10 FXST, FLST, 84-94 FXR, 86-03 XL AND MOST CUSTOM FRAMES THAT USE A 1” NECK BEARING (CONT) 1809-2615 42” springer with 3° rake $2,568.95 1809-2616 45” springer with 3° rake 2,632.95 1809-2617 48” springer with 3° rake 2,696.95
All part numbers in BOLD MAGENTA are new for 2010.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
959
SECTION
17
WINDSHIELDS TOURING
LOWER LEG ACCENTS •Quick, easy way to add a beautiful chrome finish on lower fork legs (fender bosses down) and brake caliper brackets •Does not require the front end to be dismantled for installation •Stamped steel construction with a durable chrome finish •Sold as a complete kit
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
DS-219881
FORK SKINS™ •An economical way to chrome the front fork lower legs •Include a fork brace for superior handling •Easy installation; no disassembly required PART # DESCRIPTION SINGLE-DISC APPLICATIONS DS-219884 For 00-06 FXST, 00-05 FXDWG 41mm forks (except FXSTD) DS-219886 For 00-07 39mm forks DS-219881 For 88-99 39mm forks
0403-0017
SUG. RETAIL
$199.95 199.95 199.95
TRANSMISSION & DRIVELINE
PART # 0403-0017 0403-0018
DESCRIPTION For 00-07 FLHT/FLHR/FLTR and FLHX For 08-10 FLHT/FLHR/FLTR and FLHX (do not include caliper covers)
SUG. RETAIL $279.95 199.95
FORK SLIDER DRAIN SCREWS •Chrome-plated button head Allen screws with copper compression washers •Made in the U.S.A.
GASKETS & SEALS
PART # 2401-0115 2401-0116
2401-0115
DESCRIPTION For 84-10 FX, FXR and XL models For 84-10 FXWG, FLT and Softail
SUG. RETAIL $4.95 5.95
ELECTRICAL LIGHTING
2401-0393
41MM FORK LEG ASSEMBLY REBUILD KIT
CABLES
•Complete kit, includes all parts needed for a complete rebuild of one set of 41mm front fork leg assemblies •Kit includes: two fork boots, two oil seal caps, two oil seal retaining rings, two fork O-ring caps, four damper tube seal rings, two fork slider washers, two lower fork tube bushings, two fork slider oil seals, two fork slider upper bushings, two dust seals, two fork tube cap O-rings and two oil seal retaining rings
BRAKES
PART # DESCRIPTION SUG. RETAIL 0403-0022 For 86-10 FLST, 84-10 FXST, 93-05 FXDWG, 85-86 FXWG, 84-01, 06-10 $59.95 FLT, FLHT, FLHX, FLTR, 94-10 FLHR
HANDLEBARS, CONTROLS & MIRRORS
TANKS & OIL FILTERS
2401-0394
•Kits include chrome button screws and seal washers PART # 2401-0392 2401-0393 2401-0394
DESCRIPTION For 84-10 FXWG, FLT, Softail; repl. OEM #45790-80C For 84-10 FX, FXR and XL models; repl. OEM #45790-80BH For 94-05 Dyna and 99-00 FXR; repl. OEM #45790-80CS
SUG. RETAIL $5.95 3.95 3.95
DS-190710
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS DS-190713 FOOTRESTS & LICENSE FORK DRAIN PLUGS PLATE FRAMES •Sold in pairs (Allen-head kits include Allen wrench) TIRES, •Made in the U.S.A. SUG. TUBES & PART # DESCRIPTION RETAIL WHEELS FOR 84-10 W/ 41MM TUBES; HARDWARE, REPL. OEM #45858-77 CHEMICALS DS-190710 Polished, Allen-head $5.95 4.95 & TOOLS 2401-0291 Chrome, Allen-head 2401-0292 Chrome, button-head 5.95 COVERS, FOR 84-10 W/ 39MM TUBES SECURITY (EXCEPT XL1200S); REPL. OEM #45790-80 2.95 & GENERAL DS-190713 Chrome, Allen-head
960
FORK DRAIN SCREW KITS
1809-0028 1809-0035
HARD CHROME FORK TUBE ASSEMBLIES •Assemblies come complete with fork tubes, springs, damping rods, bushings, clips, seals, slider tube caps, fork tube plugs and O-rings •Available in a wide range of lengths for virtually any custom application •Sold in pairs •Made in the U.S.A. NOTE: Customer must install fork oil. PART # DESCRIPTION SUG. RETAIL FOR 86-99 FLST/F/N, L85-99 FXST/C, L85-86 FXWG, 93-99 FXDWG AND L84-96 FLT MODELS 0404-0031 22.25” $252.95 1809-0028 24.25” (OEM length) 265.95 1809-0029 26.25” 277.95 1809-0030 28.25” 290.95 1809-0031 30.25” 310.95
PART # DESCRIPTION FOR 86-99 FLST/F/N, L85-99 FXST/C, L85-86 FXWG, 93-99 FXDWG AND L84-96 FLT MODELS (CONT) 1809-0032 32.25” 1809-0033 34.25” 1809-0034 36.25” 1809-0035 38.25”
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL
$335.95 366.95 385.95 398.95
SECTION
17
WINDSHIELDS FXSTD-STYLE FRONT FORK ASSEMBLY
41MM DEUCE-STYLE FORK LEG ASSEMBLIES
NOTE: Do not come with fork oil. PART # 1809-2160
TOURING
•Stock-length fork assembly includes chrome triple trees, chrome fork legs with satin fork tubes, all internal components and axle with spacer •Triple trees accept FXSTD risers or standard risers when used with riser inserts PART #DS-289290 •For use with 00-06 single-disc-style brake
•Complete assemblies include stock-length fork tubes, chrome lower legs, dust covers, bushings, springs, damper tubes and seals •Lower legs have vertical fender mounting holes •Accept 00-06 style single-disc brake •Sold in pairs
DESCRIPTION 41mm 00-06 Deuce-style fork leg assemblies; repl. OEM #s 46064-00 and 46066-00
SUG. RETAIL $586.95
LUGGAGE SEATS & SISSY BARS
NOTE: Fork assembly does not include fork oil, top tree nut and washer (use PART #DS-189813) or fork pinch bolts. SUG. PART # DESCRIPTION RETAIL 1809-2140 00-06 FXSTD fork assembly; repl. OEM #45343-00 $864.95
EXHAUST FUEL/AIR SYSTEMS
0403-0023
KING LOUIE 41MM LOWER LEGS •Feature hidden axle and removable front caliper and fender mounts •Made from T-6 aluminum •Available in chrome or gloss black powder coat finish •Optional billet aluminum cow bells available separately •Made in the U.S.A.
ENGINE TRANSMISSION & DRIVELINE 0412-0179
NOTE: Work with stock cow bells (fork slider covers). PART # DESCRIPTION SUG. RETAIL FOR 00-06 FXST, 00-05 FXDWG (ALL EXCEPT FXSTD) 0403-0023 Chrome $699.95 0403-0024 Black 699.95 FOR 00-06 FLST/FLSTF/FLSTC/FLSTN 0403-0027 Chrome 699.95 0403-0028 Black 699.95
ELECTRICAL LIGHTING
0403-0033
HOT LEGS FORK LEG SETS
GASKETS & SEALS
PART # DESCRIPTION SUG. RETAIL FOR 00-07 FLHT/FLHR 0403-0025 Chrome $699.95 0403-0026 Black 699.95 OPTIONAL BILLET ALUMINUM COW BELLS 0412-0179 Chrome 199.95 0412-0180 Black 199.95
0403-0034
HANDLEBARS, CONTROLS & MIRRORS
•Tapered billet machined design with hidden axle drastically cleans up front end of FLT •Offered in Smooth and Deep Cut designs in either chrome or black anodize •Easily convertible to single-disc applications (block-off kit sold separately) •Combine with a set of Ness fork boots for the complete look
CABLES BRAKES SINGLE-DISC BLOCK-OFF PLATE KITS
HOT LEGS FORK LEG SETS PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLHX, FLTR 0403-0029 Smooth, chrome 0403-0030 Smooth, black 0403-0033 Deep Cut, chrome 0403-0034 Deep Cut, black
SUG. RETAIL $549.95 549.95 549.95 549.95
PART # DESCRIPTION SUG. RETAIL FOR 00-07 FLT, FLHT, FLHR, FLHX, FLTR 0403-0031 Smooth, chrome $549.95 0403-0032 Smooth, black 549.95 0403-0035 Deep Cut, chrome 549.95 0403-0036 Deep Cut, black 549.95
PART # 0403-0037 0403-0038
DESCRIPTION Chrome Black
SUG. RETAIL $49.95 49.95
STOCK LENGTH BILLET LOWER FORK LEGS •Include removable caliper brackets for single- and dual-caliper applications (except Missile and Rocket style legs) •Accept stock or custom calipers using 11.5” rotors (calipers not included) •Feature hidden billet aluminum fender supports •Available in black anodized or chrome finish; Missile and Rocket styles only available in chrome •Made in the U.S.A.
114020
0403-0007
0403-0008
0403-0005
FOR 84-99 FXST, 93-99 FXDWG AND 85-86 FXWG PART # CHROME 114020 0403-0007
DESCRIPTION Smooth, round Missile-style
SUG. RETAIL $757.95 757.95
PART # DESCRIPTION CHROME (CONT) 0403-0008 Rocket-style
SUG. RETAIL $757.95
PART # BLACK 0403-0005
All part numbers in BOLD MAGENTA are new for 2010.
DESCRIPTION Smooth, round
SUG. RETAIL $757.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
961
SECTION
17
CHROME FORK TUBES WINDSHIELDS HARD •Finish is electrolyzed for increased hardness of 55-60 Rockwell
TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
0404-0049
•Increased hardness for better long lasting corrosion resistance •Smoother finish creates less drag and seal wear •Not as bright of finish as chrome, but more durable •Check length before ordering •Sold in pairs •Lengths given for OEM replacements may not be the exact OEM length •Made in the U.S.A.
41MM
39MM
PART # DESCRIPTION SUG. RETAIL FOR 00-10 FLSTC/F, FXST (EXCEPT FXCW/FXCWC), 00-05 FXDWG, 97-01 FLT, 97-10 FLHR AND 06-10 FLHT/FLHX/FLTRMODELS 0404-0070 20.25” $367.95 0404-0071 22.25” 371.95 0404-0072 24.25” 375.95 0404-0073 26.25” 379.95 0404-0074 28.25” 383.95 0404-0075 30.25” 387.95 FOR 86-99 FLST/F/N, L84-99 FXST/C, 85-86 FXWG, 93-99 FXDWG, L84-96 FLT AND FLHT 0404-0076 20.50” 367.95 0404-0077 22.25” 371.95 0404-0060 24.25” 375.95 0404-0061 26.25” 379.95 0404-0062 28.25” 383.95 0404-0063 30.25” 387.95
PART # DESCRIPTION FOR 87-94 FXR, 91-05 FXDL, FXD AND 87-07 XL MODELS (EXCEPT 1200S, 00-05 FXDX/FXDXT) 0404-0069 22.25” 0404-0064 24.25” 0404-0065 26.25” 0404-0066 28.25” 0404-0067 30.25” 0404-0068 32.25”
TRANSMISSION & DRIVELINE
SUG. RETAIL
$375.95 379.95 383.95 387.95 393.95 397.95
49MM PART # FOR 06-10 FXD/FXDWG 0404-0049 0404-0050 0404-0051 0404-0052 0404-0053 0404-0054 0404-0055 0404-0056 0404-0057
DESCRIPTION
SUG. RETAIL
23.50” 25.50” 27.50” 29.50” 31.50” 33.50” 35.50” 37.50” 29.50”
$375.95 379.95 383.95 387.95 394.95 398.95 402.95 408.95 412.95
GASKETS & SEALS ELECTRICAL 0404-0033
LIGHTING HANDLEBARS, CONTROLS & MIRRORS SHOW CHROME FORK TUBES
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
962
•Designed to fit a wide variety of models •Sold in pairs •Lengths given for OEM replacements may not be the exact OEM length •Made in the U.S.A.
DS-221425 DS-221420
DS-221471
35MM PART # DESCRIPTION FOR 84-86 FXRS; 86 FXR; 85 FXSB, FXE/F; 86-87 XL MODELS DS-221420 23.50” (Repl. OEM # 45407-83 FXE/F, FXR/S, XL) DS-221421 25.50” (Repl. OEM # 45392-83 FXSB, FXRT) DS221422 27.50” DS-220126 29.50”
41MM SUG. RETAIL
$181.95 185.95 189.95 194.95
39MM PART # DESCRIPTION FOR 87-94 FXR, 91-05 FXDL, FXD AND 87-07 XL MODELS (EXCEPT 1200S, 00-05 FXDX/FXDXT) DS-221470 22.25” DS-221471 24.25” (Repl. OEM #45360-90 FXR, XL) DS-221472 26.25” DS-221473 28.25” DS-220123 30.25” DS-220124 32.25” DS-220125 34.25”
DS-221472
SUG. RETAIL
$187.95 191.95 196.95 200.95 206.95 210.95 214.95
41MM (CONT) SUG. RETAIL
PART # DESCRIPTION FOR 00-10 FLSTC/F, FXST (EXCEPT FXCW/ FXCWC), 00-05 FXDWG, 97-01 FLT, 97-10 FLHR AND 06-10 FLHT/FLHX/FLTR MODELS DS-220109 20.25” (Repl. OEM # 45890-97 FLT/FLHT) $179.95 DS-220115 22.25” (Repl. OEM # 45930-00 FLST/C/F) 183.95 DS-220111 24.25” (Repl. OEM # 45417-00 FXST/C, FXDWG) 187.95 DS-220112 26.25” 191.95 DS-220113 28.25” 196.95 DS-220114 30.25” 200.95 DS-220119 32.25” 206.95 DS-220120 34.25” 210.95 DS-220121 36.25” 214.95 DS-220122 38.25” 222.95 FOR 86-99 FLST/F/N, L84-99 FXST/C, 85-86 FXWG, 93-99 FXDWG, 85-96 FLT AND FLHT DS-221425 20.25” (Repl. OEM # 45827-84 FLT, FLHT) 179.95 DS-221426 22.25” (Repl. OEM # 45930-86 FLST/C/F/N)) 183.95 DS-221427 24.25” (Repl. OEM #4541784 FXST/C, FXWG, FXDWG) 187.95
PART # DESCRIPTION FOR 86-99 FLST/F/N, L84-99 FXST/C, 85-86 FXWG, 93-99 FXDWG, 85-96 FLT AND FLHT (CONT) DS-221428 26.25” DS-221429 28.25” DS-221435 30.25” DS-221436 32.25” DS-221437 34.25”
SUG. RETAIL
$191.95 196.95 200.95 204.95 210.95
49MM PART # DESCRIPTION FOR 06-10 FXD/FXDWG 0404-0033 23.50” 0404-0034 25.50” (Repl. OEM# 46605-06 FXD) 0404-0035 27.50” (Repl. OEM# 46617-06 FXDWG) 0404-0036 29.50” 0404-0037 31.50” 0404-0038 33.50” 0404-0039 35.50” 0404-0040 37.50” 0404-0041 39.50”
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $187.95 191.95 196.95 200.95 206.95 210.95 214.95 218.95 222.95
SECTION
17
FORK SPRINGS •High-quality, high-performance replacement fork springs •A Progressive Suspension rate spring has the advantage of a rising rate resistance to compression 0405-0070 •The benefit of this is that the spring can be soft enough at the start of the travel to offer a “plush” ride, yet firm enough at the end of the travel to soak up the big bumps •Spring rates have been chosen to reduce front end drive during braking, yet still provide excellent ride comfort •Sold in pairs •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL DS-222040 For 84-87 FXRT; 84-87 FXR, FXRS; 85-86 FXRD; 0405-0064 For 04-10 XL $91.95 85-86 FX, FXE, FXS, FXSB; 86-87 XR (35mm) $91.95 DS-222056 For 87-94 FXLR; 88-94 FXR, FXRS; 88-03 XL (39mm) 11-1525 For 02-10 VRSCA/B/D, 06-10 FXD, 08-10 FXCW/C 91.95 (not 92-03 Hugger) 91.95 DS-222057 For 87-93 FXRS-SP; 88-93 FXRT; 91-05 Dyna Glide DS-222045 For 95-05 FXD, 92-03 XL Hugger (39mm) 91.95 (not FXDWG, FXD, FXDX) (39mm) 91.95 0405-0070 For 02-05 FLHT, FLTR (fairing models with cartridge fork) 91.95 DS-2220481 For 84-10 FXST, FXSTD, FLST, FLSTF; 93-06 FXDWG; 84-01 FLT, 1 For 02-05 touring models with cartridge fork, use PART #0405-0070. FLHT, FLTR; 06-10 FLHT, FLHX, FLTR; 94-10 FLHR (41mm) 91.95
FORK TUNING KITS
DESCRIPTION For 02-10 VRSCA/B/D (49mm) For 84-10 FLST/C, FXST/C, 00-07 FXSTD and 93-05 FXDWG (41mm)
ENGINE PART # 0405-0176
129.95
0405-0179 0405-0177
DESCRIPTION For 84-01 FLT, FLHT, FLTR, 06-10 FLHT, FLHX, FLTR, 94-10 FLHR (41mm) For 06-10 FXD (49mm) For 91-92 FXD, 93-05 FXDL (39mm)
SUG. RETAIL $129.95 159.95 129.95
PART # DESCRIPTION 97-02 BUELL M2 CYCLONE FRSP-S373285 .85 kg/mm spring FRSP-S373290 .90 kg/mm spring FRSP-S373295 .95 kg/mm spring FRSP-S373210 1.0 kg/mm spring 96-98 BUELL S1 LIGHTNING, 95-96 S2 THUNDERBOLT, 00-01 S3 THUNDERBOLT AND 97-98 THUNDERBOLT FRSP-S353480 .80 kg/mm spring FRSP-S353485 .85 kg/mm spring FRSP-S353490 .90 kg/mm spring FRSP-S353495 .95 kg/mm spring
SUG. RETAIL $109.95 109.95 109.95 109.95
•Race Tech complete front-end suspension kits improve comfort and performance of damping rod forks •More than just fork lowering kits, these come with Race Tech Gold Valve cartridge fork emulators and high-performance springs •Also include hardware to lower bike 1” or 2”
1
PART # DESCRIPTION SUG. RETAIL 93-05 FXD, 05 FXDC, 93-05 FXDL, 94-98 FXDS, 87-94 FXR, FXLR, FXRSP, 88-10 XL (EXCEPT 1200S) (39MM FORKS) FLEKS3580 W/ .80 kg/mm spring $259.95 FLEKS3585 W/ .85 kg/mm spring 259.95 FLEKS3590 W/ .90 kg/mm spring 259.95 0416-0045 W/ .95 kg/mm spring 259.95 02-10 VRSCA/B/D, 06-10 FXDL (49MM FORKS) 0416-0013 W/ .6-1.1 kg/mm progressive spring 259.95
279.95
Includes Gold Valve assembly for cartridge leg and Gold Valve Emulator for damping leg.
All part numbers in BOLD MAGENTA are new for 2010.
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES
109.95 109.95 109.95 109.95
COMPLETE FRONT END SUSPENSION KITS
$259.95 259.95 259.95 259.95 259.95
GASKETS & SEALS
LIGHTING
0416-0013
SUG. RETAIL
TRANSMISSION & DRIVELINE
ELECTRICAL
FLEKS3580
PART # DESCRIPTION 84-10 FLST, FXST, 93-05 FXDWG, 85-86 FXWG, 84-01 FLT, FLHT, FLTR, 94-10 FLHR, 06-10 FLHT, FLTR, FLHX (41MM FORKS) FLEKS3880 W/ .80 kg/mm spring FLEKS3885 W/ .85 kg/mm spring FLEKS3890 W/ .90 kg/mm spring 0416-0047 W/ .95 kg/mm spring 0416-0046 W/ 1.0 kg/mm spring 02-05 FLT, FLHT, FLTR 0416-00111 W/ .95 kg/mm spring
SEATS & SISSY BARS
DS-221549
0405-0176
FORK SPRINGS
0416-0011
LUGGAGE
FUEL/AIR SYSTEMS
SUG. RETAIL $159.95
•Accuracy and performance •Accurate rates within 2% •Chrome silicon, high stiffness-to-mass ratio, shot-peened, heat-treated and preset •Choose from varying spring rates to suit your riding needs PART # DESCRIPTION SUG. RETAIL 84-10 FLST, FXST, 93-05 FXDWG, 85-86 FXWG, 84-01 FLT, FLHT, 94-10 FLHR, 06-10 FLHT, FLHR, FLHX, FLTR (41MM) FRSP-S323480 .80kg/mm spring $109.95 FRSP-S323485 .85kg/mm spring 109.95 FRSP-S323490 .90kg/mm spring 109.95 FRSP-S323495 .95kg/mm spring 109.95 FRSPS323410 1.00kg/mm spring 109.95 93-05 FXD, 94-05 FXDS, 99-05 FXDX, 87-94 FXR, FXLR, FXRSP, 88-10 XL1200/C/S, 88-10 XL883/C/HUGGER (39MM) FRSPS293880 .80kg/mm spring 109.95 FRSPS293885 .85kg/mm spring 109.95 FRSPS293890 .90kg/mm spring 109.95 06-10 FXD, 10 FXDWG, 02-10 VRSCA/B (49MM) 0405-0259 W/ .6-1.1 kg/mm progressive spring 109.95 99 BUELL X1, 99-01 S3T THUNDERBOLT FRSP-S362785 .85 kg/mm spring 109.95 FRSP-S362790 .90 kg/mm spring 109.95 FRSP-S362795 .95 kg/mm spring 109.95
TOURING
EXHAUST
•Adjustable dual-rate fork springs provide a soft initial ride and then crossover to a firmer, higher rate for potholes and other large bumps •Each set consists of a long spring, a short spring, pre-load spacer material (in most cases), separating washers and three different metal spacers that determine the crossover from soft to firm •Changing the metal spacers allows for differences in rider weight, style, conditions and personal preferences •The perfect complement to Works Performance rear shocks •Sold in pairs •Made in the U.S.A. PART # 0405-0178 DS-221549
WINDSHIELDS
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
963
SECTION
17
WINDSHIELDS TOURING PS-01559
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
FORK LOWERING KIT
MONOTUBE FORK CARTRIDGE KIT •Converts dual damper rod and damper rod/cartridge forks (02-05 models) to high-performance cartridge forks •Contains a pair of high-performance, gas-charged mono-tube fork cartridges •Improves resistance to front brake dive, front end stability, cornering and bottoming control •Direct internal component replacement •No modification for forks required •Made in the U.S.A. PART # 0414-0370
DESCRIPTION For 97-10 FLT/FLHT/FLHR/FLHX/FLTR models
SUG. RETAIL $339.95
•Lowering kit utilizes Progressive Suspension’s experience and knowledge to provide exact model applications •Progressively wound for more comfort and control over a variety of road surfaces •Lowers forks up to 2” •Kit comes complete with springs, spacers and installation instructions •Made in the U.S.A. PART # 10-1565 PS-01561 PS-01560
PS-01559
GASKETS & SEALS
0416-0018
0416-0034
DESCRIPTION For 02-10 VRSCA/B/D (lowers 1”) For 84-01, 06-10 FLHT, FLT, FLHR, FLTR; 85-86 FXWG; 84-10 FXST, FLST; 93-05 FXDWG (41mm) For 87-94 FXLR; 88-94 FXR, FXRS; 87-94 FXR-SP/ CONV.; 88-92 FXRT; 91-92 FXDB/C; 93-99 FXDL (except FXDX); 94-00 FXDS-CONV; 88-10 XL (except 1200S) (39mm) For 86-87 Sportster; 82-87 FXR, FXRS; 84-87 FXRT and 85-86 FX (35mm) For 06-10 FXD
SUG. RETAIL $117.95 117.95
117.95 117.95 117.95
DS-221441
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS DROP-IN & MIRRORS FRONT FORK LOWERING SYSTEM
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•Transforms a time-consuming installation process into a quick and simple job •Lowers front end of your bike up to 2” without disassembling the forks •Entire procedure can be accomplished with basic tools •Made in the U.S.A. PART # 0416-0034 0416-0035 0416-0036 0416-0037 0416-0038
DESCRIPTION For 88-10 XL For 91-05 FXD (except FXDWG) For 06-10 FXD, 08-10 FXCW/C For 84-10 FXST/FLST, 84-10 FLHT/FLT (non-cartridge models) For 02-05 FLHT/FLTR (cartridge equipped fork models)
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES FORK TIRES, LOWERING KIT TUBES & •The quickest and easiest way to lower WHEELS front forks by 11/2” HARDWARE, •Comes with two CHEMICALS chrome compression springs, spring spacers and bushings & TOOLS •Made in the U.S.A. DESCRIPTION COVERS, PART # For 89-06 FXSTS models SECURITY DS-221458 Disassembly tool & GENERAL 3805-0075
964
SUG. RETAIL $129.95 129.95 129.95 129.95 84.95
LOWBOY FORK LOWERING KITS •This is how you get the look most everybody wants •Lower the forks up to 2” •Come with two rebound springs and two 30.5mm o.d. progressively wound fork springs plus instructions •Easy installation •Made in the U.S.A. PART # DS-2214401
DS-221441
SUG. RETAIL $149.95 34.95
DS-221442 1
DESCRIPTION SUG. RETAIL For 84-10 FXST, 93-05 FXDWG; 86-10 FLST; 84-86 FXWG; 94-10 FLHR; 84-01, 06-10 FLHT/FLTR, FLT (41mm tubes) $99.95 For 87-94 FXRS-SP, FXLR; 88-94 FXR, FXRS, FXRT; 91-05 FXD (except FXDX) ; 88-10 XL 1200 (39mm tubes) (except 1200S) 99.95 For 85-87 FXSB, FXR, FXRS; 84-86 FXRT, FXRD; 86-87 XLH 883, 1000, 1100 (35mm tubes) 99.95
Lowers FLT/FLHT 1”.
All part numbers in BOLD MAGENTA are new for 2010.
SECTION DROP-IN FORK CARTRIDGES WITH DUALRATE FORK SPRINGS
0416-0027
PART # DESCRIPTION FOR 84-10 FLT/FLHT 0405-0285 Tuneable for all weights and FOR 96-05 FXD 0405-0284 Tuneable for all weights and FOR 06-10 FXD 0405-0285 Tuneable for all weights and FOR 87-94 FXRS 0405-0283 Tuneable for all weights and 0405-0284 Tuneable for sport riding FOR 84-99 FXST/FXSTC 0405-0285 Tuneable for all weights and FOR 91-10 FXDWG/FXDL 0405-0285 Tuneable for all weights and FOR 84-10 FLST/FLSTC 0405-0285 Tuneable for all weights and FOR 00-10 FXST/FXSTD 0405-0285 Tuneable for all weights and FOR 88-10 XLH 883,1200 0405-0283 Tuneable for all weights and 0405-0284 Tuneable for sport riding
DS-222183 DS-222184
SUG. RETAIL riding styles
$369.95
riding styles
369.95
riding styles
369.95
riding styles
riding styles
369.95 369.95 369.95
riding styles
369.95
riding styles
369.95
riding styles
369.95
riding styles
369.95 369.95
TOURING LUGGAGE SEATS & SISSY BARS FRONT FORK LOWERING KITS •Everything you need to lower the front end of your motorcycle •Kits include all necessary installation hardware and instructions •PART #0416-0026 lowers front forks 11/4” – 2” (kit only lowers FLT/FLHT model front forks 1”) •PART #0416-0027 lowers front forks 1” – 2” PART # DESCRIPTION 0416-0026 For 84-10 FXST, 93-05 FXDWG; 86-10 FLST; 85-86 FXWG; 94-10 FLHR; 84-01/06-10 FLHT, FLT w/ 41mm forks 0416-0027 For 87-94 FXRS-SP, FXLR; 88-94 FXR, FXRS, FXRT; 91-05 FXD (except FXDX); 88-03 XL 883/1200 (except 00-03 XL1200S) w/ 39mm forks
EXHAUST FUEL/AIR SYSTEMS SUG. RETAIL
99.95
ELECTRICAL LIGHTING
DS-222184
FITMENT For 00-10 FXST For 00-10 FLST For 97-01 FLHT, 06-10 FLHT/FLTR, 97-10 FLHR For 84-99 FXST For 86-99 FLST For 91-05 FXDL For 94-05 FXDS For 94-05 FXD For 97-03 XL
INCHES LOWERED 2.5” 2.0” 1.5” 2.5” 2.0” 2.75” 2.75” 2.0” 2.0”
TRANSMISSION & DRIVELINE GASKETS & SEALS
GOLD VALVE CARTRIDGE FORK EMULATORS
DS-222182
ENGINE
$99.95
DS-222183
CUSTOM FORK DAMPERS FOR LOWERED APPLICATIONS
PART # DS-222182
WINDSHIELDS
0416-0026
•Self-contained damper units are designed to be used in conjunction with the stock 0405-0283 damper rods •Simple installation: simply pull the fork caps and drop in the entire assembly •Adjustable for anti-dive, ratetransition and spring preload •Can be set up for stock ride height or lowered (except FXR models) •Rebuildable •Sold in pairs •Made in the U.S.A.
•Simplify lowering front end of motorcycle •Dampers are shortened and drilled for a factory quality ride •Use stock fork springs •Sold in pairs •Made in the U.S.A.
17
SUG. RETAIL $54.95
54.95 54.95
•Make damping rod forks perform like well-tuned cartridge forks •Tunable valves sit on top of damping rods; held in place by the main springs •Typical road race track tests show an improvement of 2 seconds per lap •Simple to install and tuneable for all conditions and rider preferences PART # DESCRIPTION SUG. RETAIL FEGV-S3802 For 84-10 FLST, FXST (41mm forks) $159.95 FEGV-S3802 For 84-01, 06-10 FLT, FLHT, FLTR, FLHX, 84-01 FLT, FLHT, FLTR, 94-10 FLHR (41mm forks) 159.95 0450-0112 For 06-10 FXD, FXDF, FXDB, FXDL (49mm forks) 169.95 FEGV-S3501 For 93-05 FXD, 94-98 FXDS (39mm forks) 169.95 0450-0112 For 06-10 FXDWG (49mm forks) 169.95 FEGV-S3802 For 93-05 FXDWG, 85-86 FXWG (41mm forks) 159.95 FEGV-S3501 For 87-94, 99 FXR, FXLR, FXRSP (39mm forks) 169.95 FEGV-S3501 For 88-10 XL (except 97-03 XL 1200S) (39mm forks) 169.95 0450-0112 For 02-10 VRSC V-Rod (except VRSCR Street Rod) (49mm forks) 169.95 FEGV-S3001 For all 35mm forks 159.95
GOLD VALVE™ FORK KITS •The ultimate front end should feel controlled and not dive excessively; firm with a plush ride •Gold Valve fork kits give that plush-yet-firm ride by improving the flow area in the piston, which transfers control of the damping to the valving shims •Include “Fork Maintenance and Gold Valve Installation” video to facilitate installation PART # DESCRIPTION FOR CARTRIDGE FORKS FMGV-S2043 For 99-05 FXDX, 99-05 FXDS, 97-03 XL 1200S FMGV-S2043 For 99 Buell X1, 97-98 and 00-01 M2 Cyclone, 01 S1 Lightning, 00-01 S3 Thunderbolt, 99-01 S3T Thunderbolt
SUG. RETAIL $169.95 169.95
All part numbers in BOLD MAGENTA are new for 2010.
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
965
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS FORK DAMPER RODS EXHAUST FUEL/AIR SYSTEMS
DAMPER TUBE ASSEMBLIES
•Stock Sportster and FXR forks lack rebound damping; Progressive’s replacement damper rods combat the problem •Combine them with Progressive Suspension fork springs for a dramatic improvement •Sold in pairs •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL DS-222052 All 39mm XL (except 92-03 Hugger) and 87-94 FXRT, FXRS-SP, FXRS-CON (will not fit Dyna Glide); repl. OEM #45925-88 $122.95
•Damper tube assemblies meet or exceed OEM specifications •Designed to fit many Showa front forks •Sold each; two required to rebuild or assemble a front end SUG. PART # DESCRIPTION RETAIL DS-222044 For 84-99 FXST, 85-86 FXWG, 93-99 FXDWG models; repl. OEM #45418-84 $23.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
•Sold each
ELECTRICAL
FORK LEG LOWER STOP
FRONT FORK DAMPER TUBE MOUNTING KIT
41MM DAMPER SPRING PART # DESCRIPTION DS-222186 For 91-02 FXDWG, 84-99 FXST, FXSTC, FXWG, and FLT; repl. OEM #45855-77
SUG. RETAIL
•Precision machined for an exact fit
•Kit includes two socket-head bolts and two copper washers •Made in the U.S.A. PART # DS-222051
$5.95
PART # DS-222773
DESCRIPTION SUG. RETAIL For 84-10 Showa front ends; repl. OEM #45405-75A $5.95
DESCRIPTION For all models w/ Wide Glide Showa forks from 85-99; repl. OEM #45834-77 (ea.)
SUG. RETAIL
$8.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS DS-222030
DS-222031
CABLES
DS-222028 DS-222029
BRAKES DS-222126 DS-222125
TANKS & OIL FILTERS FORK SLIDER BUSHINGS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
966
•Replace OEM bushings •Sold in pairs •Made in Japan NOTE: Bushings and seals should be replaced whenever the front forks are disassembled. PART # DESCRIPTION SUG. RETAIL FOR 84-10 FXST/C, 93-05 FXDWG, 86-10 FLST AND 84-10 FLHT MODELS (41MM) DS-222030 Fork tube bushings; repl. OEM #45940-84 (.588” wide) $8.95 DS-222031 Lower fork leg bushings; repl. OEM #45866-84 (.778” wide) 8.95 FOR 91-05 DYNA GLIDE (EXCEPT FXDWG), 87-94 FXR AND 88-10 XL MODELS (39MM) DS-222028 Fork tube bushings; repl. OEM #45461-87 (.588” wide) 8.95 DS-222029 Lower fork leg bushings; repl. OEM #45465-87 (.778” wide) 8.95 FOR 84-87 FXR AND 86-87 XL MODELS (35 MM) DS-222125 Fork tube bushings; repl. OEM #45413-84 (.588” wide) 8.95 DS-222126 Lower fork leg bushings; repl. OEM #45416-84 (.588” wide) 8.95
SUPER SLICK FORK BUSHINGS •Revolutionary low-friction design ensures high-quality suspension performance •Constructed of FEP and tin composite, these Teflon (PTFE) coated bushings have the lowest friction properties available •Inner bushings mount on the inner (chrome) fork tube and have Teflon on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have Teflon on the inside of the bushing •Sold in pairs PART # DESCRIPTION FOR 99-01 BUELL S3T THUNDERBOLT (41MM) FMBI41201P Inner bushing (20mm wide) FMBO41202P Outer bushing (20mm wide) FOR 00-01 BUELL M2 CYCLONE (41MM) FMBI41201P Inner bushing (20mm wide) FMBO41152P Outer bushing (15mm wide) FOR 99 BUELL X1 (43MM) FMBI43201P Inner bushing (20mm wide) FMBO43152P Outer bushing (15mm wide)
SUG. RETAIL $24.95 22.95 24.95 22.95 19.95 22.95
FORK SLIDER BOTTOM CAP STUD WITH NUT •Package of two PART # DS-189814
DESCRIPTION For 84-07 Showa/Kayaba forks; repl. OEM #45998-73
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $8.95
SECTION CHROME FORK TUBE PLUGS AND CAPS CHROME FORK TUBE CAPS
•Sold in pairs
PART # DESCRIPTION SUG. RETAIL DS-222785 Fork tube caps for 85 FX; 84-86 FXR, FXRS; E86 XL (fine thread); repl. OEM #45993-73 (pr.) $19.95
PART # DS-222774
DS-222775
•CNC-machined from billet aluminum •Sold in pairs •Made in the U.S.A. PART # 0409-0012
WINDSHIELDS DS-222775
DS-222774
SUG. DESCRIPTION RETAIL Upper fork tube plugs for all 84-99 Showa Wide Glide forks (except 84 and later FLT, FLHT, FLHS and FL models w/ adjustable forks); repl. OEM #45838-77 $27.95 Slider tube caps for all 84-10 FXST/FLST, FXWG, 93-05 Dyna Wide Glide and 85-86 FXWG models; repl. OEM #45419-80 17.95
CHROME BILLET FORK TUBE NUT COVERS
SPIKED FORK CAPS
DESCRIPTION For 80-10 FXWG, FXST/FLST and 93-05 FXDWG
SUG. RETAIL $99.95
17
TOURING LUGGAGE SEATS & SISSY BARS
•Smooth design to match OEM stem nut cover •Sold in pairs •Made in the U.S.A.
EXHAUST
PART # DESCRIPTION SUG. RETAIL DS-222149 For 87-10 fork tube nuts (except 06-10 Dyna Glide) $49.95
FUEL/AIR SYSTEMS ENGINE
CUSTOM BILLET FORK BOOTS 41MM FORK TUBE COVERS •Chrome 6061 T-6 billet aluminum •Fit between the upper and lower triple trees on raked Accutronix trees •Made in the U.S.A.; sold in pairs PART # 0412-0061
DESCRIPTION For 5°/7° raked triple trees, gothic
SUG. RETAIL $94.95
TRANSMISSION & DRIVELINE
•Exclusive slash-cut design gives you a new, bold look •Made from 6061 T-6 billet aluminum and chrome-plated •41mm boots have internal O-rings to keep water out •Attach firmly with included setscrew •Sold in pairs •Made in the U.S.A. PART # DS-222821
GASKETS & SEALS
DESCRIPTION For 84-10 FXST, 93-05 FXDWG and 85-86 FXWG models
SUG. RETAIL $99.95
ELECTRICAL LIGHTING
DS-222812
HANDLEBARS, CONTROLS & MIRRORS
CUSTOM BILLET FORK BOOTS 0412-0062
•Chrome billet aluminum fork boots add a touch of class to the tops of your fork sliders •Available in two styles to fit 41mm fork sliders •Attach firmly with a setscrew •Sold in pairs •Made in the U.S.A.
0412-0063
BILLET FORK SLIDER COLLARS •Cover the stock dust covers •CNC-machined from billet aluminum and chrome-plated •Installation requires removal of fork legs •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 41MM WIDE GLIDE FRONT ENDS 0412-0062 Ball-milled 0412-0063 Smooth
SUG. RETAIL $87.95 87.95
CABLES DS-222813
PART # DESCRIPTION FOR 84-10 FXST/C, 93-05 FXDWG AND 85-86 FXWG DS-222812 Ball-milled DS-222813 Smooth
SUG. RETAIL $66.95 66.95
DS-219995
PART # 200
DESCRIPTION Fork guards
FORK BOOTS
FORK BOOT COVERS
•Protect fork seals from road hazards including bugs, dirt, rocks, etc. •Neoprene guards are stretchy and durable; fit nearly all motorcycle forks •Machine-washable •Hook-and-loop fasteners for easy installation •Available in black only •Sold in pairs •Made in the U.S.A.
•Aluminum construction with chrome-plated finish •Sold in pairs PART # DS-219995
0406-0017
SUG. RETAIL $17.95
DESCRIPTION For 39mm forks on 88-94 FXR, 88-10 XL; 91-05 FXD; repl. OEM #46002-87 For 49mm forks on 06-10 FXD/FXDWG, 02-10 VRSC models (billet machined)
TANKS & OIL FILTERS DASHES & GAUGES
DS-240341
FORK GUARDS
BRAKES
SUG. RETAIL
$14.95
39.95
•Keep dirt and dust out of the fork seals to ensure long fork life •Black molded rubber fork boots replace worn stock boots; sold in pairs SUG. PART # DESCRIPTION RETAIL DS-240341 For 84-10 FXST, 93-05 FXDWG and 85-86 FXWG; repl. OEM #45420-80 $6.95 DS-240350 For 86-87 FX, XL (Showa); repl. OEM #45404-75 5.95
All part numbers in BOLD MAGENTA are new for 2010.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
967
SECTION
17 0415-0004
WINDSHIELDS 0415-0003
TOURING DS-222709
LUGGAGE 0415-0012
0415-0013
SEATS & FRONT FORK BRACES SISSY BARS TRACKER •Designed to replace front fender EXHAUST FUEL/AIR SYSTEMS ENGINE
DS-222706
•Practically eliminates front fork flex •Stamped RSD logo copper badge riveted to top •Chrome hardware included •Made in the U.S.A. PART # DESCRIPTION FOR 84-10 FXST/FLST, 93-05 FXDWG W/ 21” WHEELS (EXCEPT FXSTD, FXCW, FXCWC) 0415-0012 Chrome 0415-0013 Black FOR 88-05 FXR/FXD, 88-10 XL W/ 19”/21” WHEELS 0415-0015 Chrome 0415-0014 Black
SUG. RETAIL
$149.95 129.95 149.95 129.95
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING
CHROME-PLATED FORK BRACE •Quality hardened steel construction •1” billet aluminum spacers •Fits 21” wheels •Made in the U.S.A. PART # DESCRIPTION 0415-0002 For 41mm Wide Glide w/ horizontal mounting holes on fork legs
TANKS & OIL FILTERS
DS-222706 DS-222707
DASHES & GAUGES
SUG. RETAIL $263.95 263.95 263.95 242.95 242.95 242.95 242.95
DS-222098 DS-222098
$225.95
FORK BRACES
DESCRIPTION For FXWG, FXST, FXDWG and FXSTD models
SUG. RETAIL $171.95
•High-quality, chrome-plated, die-cast aluminum fork braces •Clamps to the lower fork leg below the dust cap •Total adjustability prevents binding that may occur with one-piece 0415-0005 fork braces PART # DESCRIPTION SUG. RETAIL DS-222098 For all 84-10 FXST, FXWG and 93-05 FXDWG models except FXSTD (not for use w/ shrouded forks) $156.95 0415-0005 For 00-07 FXSTD 169.95
DS-221906 DS-221906
DS-222118
FRAMES, CUSTOM BILLET SUSPENSION 39MM FORK BRACES & FENDERS •Machined from 6061 T-6 billet aluminum FOOTRESTS •Choose from natural satin, & LICENSE anodized black or chrome finish PLATE FRAMES •Extremely lightweight, only 14.5 oz.; excellent rigidity and strength TIRES, •Bolts to lower fork legs adjustable to compensate for any TUBES & •Totally manufacturing inconsistencies in fork assembly WHEELS •Stainless steel hardware HARDWARE, •Made in the U.S.A. ALL 88-05 FXR, FXD AND 88-10 XL MODELS CHEMICALS FOR WITH 39MM NARROW GLIDE SHOWA FORKS & TOOLS PART # DESCRIPTION Satin COVERS, DS-222118 Anodized black SECURITY DS-222119 Chrome & GENERAL DS-222120
968
DESCRIPTION 49mm for 06-10 FXD 49mm for 06-08 FXDWG, 08-10 FXDF 41mm FXSTD 41mm Wide Glide (except FXSTD, 07-10 FXSTC) 39mm Wide Glide conversion kit (97/8” center-to-center) 39mm mid glide 39mm narrow glide
SUG. RETAIL
•As in the good old days with extended front tubes, the need for a tweek bar is here again •Vast improvement over the tweek bars used back in the 60s and 70s •Feature lightening holes with a compound arc for added strength and great looks •Bolts directly to the fork tubes •Made in the U.S.A. PART # 2406-8002
DS-222707
•Manufactured from a solid piece of 6061 T-6 aluminum, then chrome-plated •Designed with a compound arch for greater torsional stiffness, which means not only less deflection and twisting but more fender clearance •Bolts to lower fork legs, which enables the use of dust covers, no need to disassemble the front fork •Made in the U.S.A. by Custom Cycle Engineering
2406-8001
TWEEK BAR
BRAKES
CHROME BILLET ALUMINUM FORK TRUSSES
PART # 0415-0003 0415-0004 DS-222709 DS-222705
HANDLEBARS, CONTROLS 41MM CHROME & MIRRORS WIDE GLIDE CABLES
DS-222705 2406-8001
DS-222119
DS-221908 DS-221908 DS-222120
STEERING DAMPER KITS •Seven-position hydraulic steering dampers •Fully adjustable; allows full-fork movement from stop-to-stop •Dampen unwanted fork oscillations (speed wobble) •Include required mounting hardware and instructions for installation
SUG. RETAIL $119.95 124.95 134.95
PART # DS-221906 DS-221907 DS-221908 DS-221909 DS-221910
DESCRIPTION For 00-10 FXST models For 86-99 FXST models For L88-03 XL models (w/ 39mm forks) For 91-05 FXD For 93-05 FXDWG models
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $224.95 224.95 224.95 224.95 249.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE 614-1101-001
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
DRAG SPECIALTIES SHOCK ABSORBERS •Shock bodies are steel construction with multi-stage velocity-sensitive hydraulic dampers •Feature progressive rate springs that provide a softer initial response, but resist bottoming better than stock springs •Improved damping rates for a more controlled ride with no wallowing •Adjustable spring pre-load •Chrome-plated covers and springs for style •Custom lengths available for stock ride height or a lowered, custom look •Manufactured to Drag Specialties specifications by Progressive Suspension •Sold in pairs •Made in the U.S.A. NOTE: Lowering the motorcycle will reduce ground and cornering clearance. NOTE: When installing replacement shocks on 86-03 XL models, it may be necessary to modify or space the chain guard/belt guard to allow proper shock clearance. NOTE: Heavy Duty Applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time.
TRANSMISSION & DRIVELINE GASKETS & SEALS To use the 11” shocks on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. Then install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.
ELECTRICAL LIGHTING
STANDARD APPLICATION For 91-10 Dyna Glide (except 00-05 FXDX/FXDXT) For 06-10 FLT/FLHT/FLHR/FLTR For 84-05 FLT/FLHT/FLHR/FLTR For 84-94 FXR For 04-10 XL For 86-03 XL For 88-03 XLH 883/1200
11.0” 614-1101-001 1310-0227 1310-0377 1310-0227 1310-0227
11.5” 1310-0381 614-1150-001 614-1150-001 1310-0381 614-1150-001 614-1150-001
12.0” 614-1201-001 -
12.5” 1310-0387 614-1250-002 614-1250-001 1310-0385 614-1250-001 614-1250-001
13.0” 1310-0602 614-1300-002 614-1300-001 1310-0388 614-1300-001 614-1300-001
SUG. RETAIL $224.95 224.95 224.95 224.95 224.95 224.95 224.95
HEAVY DUTY FITS MODEL For 91-10 Dyna Glide (except 00-05 FXDX/FXDXT) For 06-10 FLT/FLHT/FLHR/FLTR For 84-05 FLT/FLHT/FLHR/FLTR For 84-94 FXR For 04-10 XL For 86-03 XL For 88-03 XLH 883/1200
11.0” 1310-0380 1310-0378 1310-0379 1310-0378 1310-0378
11.5” 1310-0383 1310-0382 1310-0382 1310-0383 1310-0382 1310-0382
12.0” 1310-0384 -
12.5” 1310-0601 1310-0386 614-1250-002 1310-0387 614-1250-002 614-1250-002
13.0” 1310-0603 1310-0389 614-1300-002 1310-0390 614-1300-002 614-1300-002
SUG. RETAIL $224.95 224.95 224.95 224.95 224.95 224.95 224.95
1310-0586
SLAMMER SHOCKS •Made famous by the Burly Slammer Suspension Kit but now available on their own •Stubby 10.5” eye-to-eye measurement •Are preload adjustable to tune to rider weight •Available in black or chrome •Made in the U.S.A. DESCRIPTION CHROME BLACK SUG. RETAIL DYNA GLIDE For 91-10 FXD 1310-0590 1310-0591 $199.95 XL For 88-03 XL 1310-0586 1310-0587 199.95 For 04-10 XL 1310-0588 1310-0589 199.95
All part numbers in BOLD MAGENTA are new for 2010.
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
1310-0587
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
969
SECTION
17
WINDSHIELDS TOURING
Chrome/Polished
LUGGAGE Black
SEATS & SISSY BARS EXHAUST 430 SERIES SHOCKS
FUEL/AIR SYSTEMS
•Get the best in class dampening performance with this high-pressure gas mono tube shock •Gas and oil separated with a divider piston •Fade-free in any type of conditions •Features disk valves for quick and consistent damping •Threaded preload adjuster allows for fine tuning with a simple twist of the cap •Can be mounted with the preload adjuster at the top or bottom •Includes a durable “Nitro-Steel” piston shaft •Available in a chrome or black finish •Made in the U.S.A.
ENGINE TRANSMISSION & DRIVELINE
NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.
GASKETS & SEALS
NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering. NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing.
ELECTRICAL
NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of the catalog.
HEAVY-DUTY 430 SERIES SHOCKS
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
APPLICATION FLT/FLHT 06-10 FLT/FLHT/FLHR/FLTR 84-05 FLT/FLHT/FLHR/FLTR FXD 91-10 FXD (except 00-05 FXDX, FXDXT) FXR 87-94 FXR, 99-10 FXR
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
970
XL 04-10 XL 86-03 XL
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
SUG. RETAIL
CHR BLK CHR BLK
-
1310-0498 1310-0499 1310-0282 1310-0283
1310-0500 1310-0501 1310-0290 1310-0291
1310-0562 1310-0561 1310-0532 1310-0531
1310-0564 1310-0563 1310-0534 1310-0533
CHR BLK
1310-0288 1310-0289
-
1310-0542 1310-0541
1310-0544 1310-0543
-
544.95 494.95
CHR BLK
1310-0536 1310-0535
1310-0282 1310-0283
1310-0290 1310-0291
1310-0526 1310-0525
1310-0528 1310-0527
544.95 494.95
CHR BLK CHR BLK
1310-0558 1310-0557 1310-0536 1310-0535
1310-0413 1310-0414 1310-0282 1310-0283
1310-0415 1310-0416 1310-0290 1310-0291
1310-0552 1310-0551 1310-0526 1310-0525
1310-0554 1310-0553 1310-0528 1310-0527
544.95 494.95 544.95 494.95
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
CHR BLK CHR BLK
-
1310-0496 1310-0497 1310-0280 1310-0281
1310-0566 1310-0565 1310-0546 1310-0545
1310-0568 1310-0567 1310-0526 1310-0525
1310-0570 1310-0569 1310-0528 1310-0527
CHR BLK
1310-0286 1310-0287
-
1310-0538 1310-0537
1310-0540 1310-0539
-
544.95 494.95
CHR BLK
1310-0278 1310-0279
1310-0280 1310-0281
1310-0546 1310-0545
1310-0284 1310-0285
1310-0530 1310-0529
544.95 494.95
CHR
1310-0292
-
1310-0293
-
-
544.95
CHR BLK CHR BLK
1310-0409 1310-0410 1310-0278 1310-0279
1310-0411 1310-0412 1310-0280 1310-0281
1310-0560 1310-0559 1310-0546 1310-0545
1310-0417 1310-0418 1310-0284 1310-0285
1310-0556 1310-0555 1310-0530 1310-0529
544.95 494.95 544.95 494.95
CHR BLK
-
-
1310-0548 1310-0547
1310-0550 1310-0549
-
544.95 494.95
$544.95 494.95 544.95 494.95
STANDARD 430 SERIES SHOCKS APPLICATION FLT/FLHT 06-10 FLT/FLHT/FLHR/FLTR 84-05 FLT/FLHT/FLHR/FLTR FXD 91-10 FXD (except 00-05 FXDX, FXDXT) FXR 91-94, 99-00 FXR FX/FXWG 4-SPEED 73-86 FX/FL XL 04-10 XL 86-03 XL V-ROD 02-10 VRSC/A/AW/D/X
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $544.95 494.95 544.95 494.95
SECTION
17
WINDSHIELDS 412 SERIES SHOCKS •Manufactured from the finest materials available •Designed specifically for Harley models •412 Series steel spring shocks are nitrogen gas-charged with multi-stage automatic valving and an adjustable spring preload; proven under extensive testing; easily installed; available in all black or with chromed springs and end caps (shock cartridge is not chrome) •Available in standard shocks for the average single rider or heavy-duty shocks better fitted for the touring rider carrying passengers or a body weight of 225 lb. and up •Shock absorbers carry a one-year limited warranty; shock springs have lifetime warranties •Optional shock lights available, see page 663 •TUV approved •Made in the U.S.A.
TOURING LUGGAGE
Black
Chrome
With chrome covers
NOTE: All shocks are measured center-of-eyelet to center-of-eyelet. NOTE: CHR denotes chrome shock part numbers; BLK denotes black shock part numbers.
SEATS & SISSY BARS EXHAUST
NOTE: When installing shocks on 84-10 XL models, it may be necessary to modify or space the chain/belt guard to allow proper clearance. NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering. NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering.
FUEL/AIR SYSTEMS
NOTE: For OEM shock lengths, see Quick Reference Guide in the back of the catalog. NOTE: Some or all shocks listed have TUV approval. Refer to most recent TUV certificate for current listing.
HEAVY-DUTY 412 SERIES SHOCKS APPLICATION V-ROD 02-10 VRSCA/B/D/W FLT, FLHT 06-10 FLT, FLHT, FLHR, FLTR 84-05 FLT, FLHT, FLHR, FLTR DYNA 91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/o cover 91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover FXR 88-94 FXR models XL 04-10 XL 86-03 XL 1
COLOR
11.0”
11.5”
12.0”
12.5”
12.6”
13.0”
13.5”
SUG. RETAIL
CHR BLK
-
-
-
PS412-4054C PS412-4054B
-
PS412-4055C -
-
CHR BLK CHR BLK
-
1310-0480 1310-0481 PS4011C -
1310-0482 1310-0483 PS412-4050C PS4050B
1310-0484 1310-0485 PS4124019C PS4124019B
-
1310-0486 1310-0487 PS4020B
PS4021C -
299.95 299.95 299.95 299.95
CHR BLK CHR
PS4045C1 DS-3100441 PS4047C1
-
PS4044C DS-310068 PS4046C
-
PS4048C PS4048B -
-
-
299.95 299.95 358.95
CHR BLK
PS4022C PS4022B
PS4011C -
PS412-4050C PS4050B
PS4001C PS4001B
-
PS4002C PS4002B
PS4003C PS4003B
299.95 299.95
CHR BLK CHR BLK
1310-0395 1310-0396 PS4022C PS4022B
1310-0399 1310-0400 PS4011C -
1310-0403 1310-0404 PS412-4050C PS4050B
1310-0407 1310-0408 PS4001C PS4001B
-
PS4002C PS4002B
PS4003C PS4003B
299.95 299.95 299.95 299.95
Fender on FXDWG must be modified – see diagram.
STANDARD 412 SERIES SHOCKS APPLICATION V-ROD 02-10 VRSCA/B/D/W FLT, FLHT 06-10 FLT, FLHT, FLHR, FLTR 84-05 FLT, FLHT, FLHR, FLTR DYNA 91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/o cover 91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover FXR 87-94 FXR models FX, FXWG 4-SPEED 85-86 FX, FXWG w/o cover 85-86 FX, FXWG w/ cover XL 04-10 XL 86-03 XL 1
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
13.5”
14.25”
CHR BLK
-
-
PS412-4051C PS412-4051B
-
-
-
-
$299.95 299.95
CHR BLK CHR BLK
-
1310-0472 1310-0473 DS-310033 DS-310034
1310-0474 1310-0475 PS4049C PS4049B
1310-0476 1310-0477 -
1310-0478 1310-0479 PS4002C PS4002B
PS4003C PS4003B
-
299.95 299.95 299.95 299.95
CHR BLK CHR
DS-3100611 DS-3100261 DS-3100281
-
DS-310060 DS-310053 DS-310036
DS-310038 -
-
-
-
299.95 299.95 358.95
CHR BLK
DS-310093 DS-310092
DS-310033 DS-310034
-
DS-222000 DS-222010
DS-222001 DS-222011
DS-222002 DS-222012
DS-310059 DS-310057
299.95 299.95
CHR CHR
DS-222013 -
-
DS-222004 DS-310089
-
-
-
-
299.95 358.95
CHR BLK CHR BLK
1310-0393 1310-0394 DS-310093 DS-310092
1310-0397 1310-0398 DS-310033 DS-310034
1310-0401 1310-0402 PS4049C PS4049B
1310-0405 1310-0406 DS-222000 DS-222010
DS-222001 DS-222011
DS-222002 DS-222012
DS-310059 DS-310057
299.95 299.95 299.95 299.95
Fender on FXDWG must be modified – see diagram.
To use the 11” or 11.5” 412 shock on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.
All part numbers in BOLD MAGENTA are new for 2010.
ENGINE
$299.95 299.95
SUG. RETAIL
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
971
SECTION
17 Chrome flame with chrome springs
WINDSHIELDS TOURING 812 SERIES SHOCKS
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
•Manufactured from the finest materials available •812 Series steel spring shocks are nitrogen gas-charged with multi-stage automatic valving and an adjustable spring preload; proven under extensive testing; easily installed; available in chromed springs and end caps •Available in standard shocks for the average single rider or heavy-duty shocks better fitted for the touring rider carrying passengers or a body weight of 225 lb. and up •Styled covers can be turned in any direction to achieve a unique custom look •Optional shock lights available, see page 663 •TUV approved •Made in the U.S.A.
Vintage
Baloney cut Double cut
Chrome flame with black springs
NOTE: All shocks are measured center of eyelet to center of eyelet. NOTE: When installing shocks on 86-10 XL models, it may be necessary to modify or space the chain/belt guard to allow proper clearance.
TRANSMISSION & DRIVELINE
NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering. NOTE: A shock which is slightly shorter than stock may slightly alter the head angle and provide somewhat slower steering. NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing. NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of catalog.
GASKETS & SEALS
HEAVY-DUTY 812 SERIES SHOCKS APPLICATION FLT, FLHT 84-10 FLT/FLHT/FLHR/FLTR
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS
FXD 91-10 FXD (except 00-05 FXDX, FXDXT)
XL 04-10 XL
CABLES 91-03 XL
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
972
COVER STYLE
11.0”
11.5”
12.0”
Baloney Cut Double Cut Chrome Flame w/ chrome springs Chrome Flame w/ black springs
-
1310-0210 1310-0220 -
1310-0216 1310-0226 1310-0274 1310-0275
$439.95 439.95 439.95 439.95
Baloney Cut Double Cut Chrome Flame w/ chrome springs Chrome Flame w/ black springs Vintage
1310-0215 1310-0225 1310-0272 1310-0273 1310-0297
-
1310-0460 1310-0461 1310-0462 1310-0463 1310-0464
439.95 439.95 439.95 439.95 439.95
Baloney Cut Double Cut Chrome Flame Chrome Flame Baloney Cut Double Cut Chrome Flame Chrome Flame
1310-0465 1310-0466 1310-0467 1310-0468 1310-0451 1310-0452 1310-0453 1310-0454
1310-0429 1310-0428 1310-0430 1310-0431 1310-0210 1310-0220 1310-0266 1310-0267
1310-0433 1310-0432 1310-0434 1310-0435 1310-0216 1310-0226 -
439.95 439.95 439.95 439.95 439.95 439.95 439.95 439.95
w/ chrome springs w/ black springs
w/ chrome springs w/ black springs
SUG. RETAIL
STANDARD 812 SERIES SHOCKS APPLICATION FLT, FLHT 84-10 FLT/FLHT/FLHR/FLTR FXD 91-10 FXD (except 95-05 FXDX, FXDXT)
FX/FXWG 4-SPEED 85-86 FX/FXWG
XL 04-10 XL
91-03 XL
COVER STYLE
11.0”
11.5”
12.0”
12.5”
Baloney Cut Double Cut
-
1310-0208 1310-0218
-
-
$439.95 439.95
Baloney Cut Double Cut Chrome Flame w/ chrome springs Chrome Flame w/ black springs Vintage
1310-0214 1310-0224 1310-0270 1310-0271 1310-0295
-
1310-0455 1310-0456 1310-0457 1310-0458 1310-0459
-
439.95 439.95 439.95 439.95 439.95
Baloney Cut Double Cut Chrome Flame w/ chrome springs Vintage
1310-0212 1310-0222 1310-0276 1310-0296
-
1310-0211 1310-0221 1310-0277 1310-0294
-
439.95 439.95 439.95 439.95
Baloney cut Double Cut Chrome Flame Chrome Flame Vintage Baloney Cut Double Cut Chrome Flame Chrome Flame Vintage
1310-0421 1310-0420 1310-0422 1310-0423 1310-0419 1310-0207 1310-0217 1310-0262 1310-0263 1310-0298
1310-0425 1310-0424 1310-0426 1310-0427 1310-0208 1310-0218 1310-0264 1310-0265 -
-
1310-0437 1310-0436 1310-0438 1310-0439 1310-0209 1310-0219 1310-0268 1310-0269 -
439.95 439.95 439.95 439.95 439.95 439.95 439.95 439.95 439.95 439.95
w/ chrome springs w/ black springs
w/ chrome springs w/ black springs
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL
SECTION Chrome
Black
17
WINDSHIELDS
440 IAS SERIES SHOCKS •High-pressure gas-charged for consistent damping performance •Patented Inertia Active System (IAS) damping for unsurpassed handling and comfort •Top mount threaded preload adjuster allows for fine tuning with a simple twist of the cap •Feature two independent rebound damping circuits •Available in chrome billet aluminum end caps with chrome springs or black anodized end caps with powder coated black springs •Heavy duty applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time •Inertia valve determines whether the soft (wheel) circuit or the firm (chassis) circuit is utilized to optimize both handling and comfort automatically •All three damping circuits, compression, as well as soft and firm rebound are also velocity sensitive •TUV approved •Made in the U.S.A.
TOURING LUGGAGE SEATS & SISSY BARS EXHAUST
NOTE: CHR = Chrome covers/chrome springs BLK = Black covers/black springs NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.
FUEL/AIR SYSTEMS
NOTE: A shock which is slightly shorter than stock may slightly alter the head angle and provide somewhat slower steering.
To use the 11” or 11.5” 412 shock on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.
NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of catalog.
84-05 FLT/FLHT/FLHR/FLTR FXD 91-09 FXD/FXDWG models FXR 84-94 FXR/FXRS/FXRT/FXLR XL 04-10 XL 86-03 XL 1 2
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
13.5”
SUG. RETAIL
CHR
-
-
-
-
1310-0261
-
CHR BLK CHR BLK
-
1310-0506 1310-0507 1310-0306 440-4011B
1310-0508 1310-0509 1310-0315 440-4050B
1310-0307 440-4019B 1310-0307 440-4019B
1310-0308 440-4020B 1310-0308 440-4020B
1310-0257 440-4021B 1310-0257 440-4021B
645.95 589.95 645.95 589.95
CHR BLK
-
1310-03181, 2 440-4053B1, 2
1310-02581 440-4044B1
1310-03131 440-4048B1
1310-03161 -
1310-03121 -
645.95 589.95
CHR BLK
1310-0309 440-4022B
1310-0306 440-4011B
1310-0315 440-4050B
-
-
-
645.95 589.95
CHR BLK CHR BLK
1310-0442 1310-0443 1310-0309 440-4022B
1310-0446 1310-0447 1310-0306 440-4011B
1310-0315 440-4050B
-
-
-
645.95 589.95 645.95 589.95
$645.95
STANDARD 440 SERIES SHOCKS
FLT/FLHT 06-10 FLT/FLHT/FLHR/FLTR 84-05 FLT/FLHT/FLHR/FLTR FXD 91-10 FXD/FXDWG models FXR 84-94 FXR/FXRS/FXRT/FXLR FX/FXWG 4-SPEED 85-86 FX/FXWG XL 04-10 XL 86-03 XL
2 3
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES
00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks. Fender on FXDWG must be modified – see diagram above.
APPLICATION V-ROD 02-10 VRSCA/B/D/W
1
TRANSMISSION & DRIVELINE GASKETS & SEALS
HEAVY-DUTY 440 SERIES SHOCKS APPLICATION V-ROD 02-10 VRSCA/B/D/W FLT/FLHT 06-10 FLT/FLHT/FLHR/FLTR
ENGINE
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
13.5”
CHR BLK
-
-
1310-0259 440-4054B
-
1310-0260 -
-
CHR BLK CHR BLK
-
1310-0502 1310-0503 1310-0303 440-4006B
1310-0504 1310-0505 1310-0314 440-4049B
1310-0299 440-4001B1 1310-0299 440-4001B
1310-0300 440-4002B 1310-0300 440-4002B
1310-0301 1310-0301 -
645.95 589.95 645.95 589.95
CHR BLK
-
1310-03172, 3 440-4052B2, 3
1310-03102 -
1310-03112 -
-
-
645.95 589.95
CHR BLK
1310-0302 440-4005B
1310-0303 440-4006B
1310-0314 440-4049B
-
1310-0304 -
1310-0305 -
645.95 589.95
CHR
-
1310-03182
1310-0258
-
-
-
645.95
CHR BLK CHR BLK
1310-0440 1310-0441 1310-0302 440-4005B
1310-0444 1310-0445 1310-0303 440-4006B
1310-0314 440-4049B
-
1310-0304 -
1310-0305 -
645.95 589.95 645.95 589.95
SUG. RETAIL $590.95. 00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks. Fender on FXDWG must be modified – see diagram above.
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $645.95 589.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
973
SECTION
17
WINDSHIELDS TOURING
940 ULTRA TOURING SHOCKS •Designed to provide a comfortable ride at 1” lowered stance •Built around Progressive Suspensions IAS series technology which separates wheel movement from chassis movement •Utilizes all the suspension travel provided by these 13” eye-to-eye units •Unique Ultra Touring spring combination delivers a lower ride height while riding and while on the side-stand •Adjust spring pre-load by hand with threaded adjusters (does not require special tools) •High-pressure gas charged for consistent performance •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1310-0571 For 84-10 FLT/FLHT/FLHR/FLTR models $699.95
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 418 SERIES SHOCKS
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS
•Aluminum body twin shocks •Five-position, externally adjustable rebound damping range allows you to dial in the ride you want •Four-position, easily adjusted spring preload cam lets you adjust for different load and ride characteristics •Gas charged for fade-free operation To use the 11” or 11.5” 440, 418 shock •Available in standard shocks for the average single on FXDWG models, the fender must be rider or heavy-duty shocks better fitted for the modified as follows: When the shock touring rider carrying passengers or a body weight is compressed, the belt guard will hit of 225 lb. and up the fender edge (see Figure 1). Trim •Velocity-sensitive, multistage internal damping the fender as shown in figure 1 inset. gives a consistent ride and handling over a variety After the fender is trimmed, install of road surfaces •The body is machined from aircraft-quality aluminum, one shock with springs removed and compress shock to verify that belt clear anodized for an attractive and durable finish guard clearance is sufficient. •Double-walled construction (steel inner wall) for excellent durability •Chromoly 4130 steel shaft, hard-chromed and precision-ground for strength and durability •Complete shock assemblies include chrome or black springs •Sold in pairs •TUV approved •Made in the U.S.A.
Chrome
Black
NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering. NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering. NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of catalog. NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing.
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
HEAVY-DUTY 418 SERIES SHOCKS APPLICATION V-ROD 02-10 VRSCA/B/D FLT/FLHT 84-05 FLT/FLHT/FLHR/FLTR DYNA GLIDE 91-10 FXD, FXDWG FXR, XL 84-94 FXR, 86-10 XL 1
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
974
2
SPRING COLOR
11.5”
12.0”
12.5”
13.0”
CHR
-
-
PS4821C
-
$598.95
CHR BLK
PS4811C PS4811B
PS4814C PS4814B
-
-
598.95 598.95
CHR BLK
PS4845C1, -
PS4844C2 PS4844B2
-
-
598.95 598.95
CHR BLK
PS4811C PS4811B
PS4814C PS4814B
-
PS4816C PS4816B
598.95 598.95
2
SUG. RETAIL
Fender on FXDWG must be modified – see diagram above. 00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.
STANDARD 418 SERIES SHOCKS APPLICATION FLT/FLHT 06-10 FLT/FLHT/FLHR/FLTR 84-05 FLT/FLHT/FLHR/FLTR DYNA GLIDE 91-10 FXD/FXDWG FX/FXWG 4-SPEED 85-86 FX/FXWG FXR, XL 84-94 FXR, 86-10 XL 1 2
SPRING COLOR
11.5”
12.0”
12.5”
13.0”
13.5”
CHR BLK CHR BLK
1310-0488 1310-0489 DS-222017 -
1310-0490 1310-0491 PS4812C PS4812B
-
PS4816C PS4816B
-
$598.95 598.95 598.95 598.95
CHR BLK
DS-2220201, -
PS4836C2 PS4836B2
DS-2220212 -
-
-
598.95 598.95
CHR
PS4839C
PS4813C
-
-
-
598.95
CHR BLK
DS-222017 -
PS4812C PS4812B
DS-222018 -
PS4815C -
DS-222019 -
598.95 598.95
2
Fender on FXDWG must be modified – see diagram above. 00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL
SECTION Street Tracker
Steel Tracker
Street Tracker
17
Black Tracker
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
STREET TRACKER, STEEL TRACKER AND BLACK TRACKER SHOCK ABSORBERS 1/2”
•Feature hard-chrome high-tensile steel shafts and billet aluminum components with computer-calibrated check ball, spring and orifice damping system 3 •Chromed-steel hydraulic tube with 1 /8” damping piston and billet aluminum end caps •Select units feature ARS (adjustable-rate suspension), which allows the rider to increase or decrease the load-carrying capacity of the shocks up to 50% without changing the pre-load of the springs •Steel Tracker shocks are available with two load-carrying capacities: 400-lb. and 500-lb. rider and passenger total weight •Available with chrome or back springs •Made in the U.S.A. STREET TRACKER (WITH CHROME SPRINGS) PART # DESCRIPTION FOR 02-10 VRSCA/B/D 1310-0012 12” L dual-rate (1.6” lower than stock) 1310-0011 13” L (stock length) dual-rate FOR 91-10 DYNA DS-310000 11.6” L single-rate 1310-0075 12.6” L (stock length) dual-rate w/ ARS DS-310002 12.6” L (stock length) single-rate FOR 94-05 FXD-CONV. DS-310021 13” L (stock length) dual-rate FOR 87-94 FXR DS-310078 12” L single-rate DS-310077 13” L (stock length) single-rate FOR 04-10 883/1200 XLH 1310-0078 11.00” L single-rate (100-160 lb. rider) 1310-0077 11.75” L single-rate (175-225 lb. rider) 1310-0076 13.25” L (stock length) dual-rate (175-225 lb. rider) FOR 88-03 XL DS-310023 12.5” L dual-rate; chrome spring STEEL TRACKER (WITH BLACK SPRINGS) PART # DESCRIPTION FOR 94-10 FLT/FLHT DS-310067 12” L dual-rate w/ ARS (400 lb. total weight) DS-310076 12” L dual-rate w/ ARS (500 lb. total weight)
SUG. RETAIL $519.95 565.95 519.95 699.95 519.95 565.95 519.95 519.95 519.95 519.95 565.95 565.95
SUG. RETAIL $565.95 565.95
422 SERIES SHOCKS
TRANSMISSION & DRIVELINE GASKETS & SEALS
BLACK TRACKER (WITH BLACK SPRINGS) PART # DESCRIPTION SUG. RETAIL FOR 02-10 VRSCA/B/D 1310-0574 12” L dual-rate (1.6” lower than stock) $464.95 1310-0573 13” L (stock length) dual-rate 519.95 FOR 91-10 DYNA 1310-0575 11.6” L single-rate 464.95 1310-0576 12.6” L (stock length) single-rate 464.95 FOR 94-05 FXD-CONV. 1310-0577 13” L (stock length) dual-rate 519.95 FOR 87-94 FXR 1310-0585 12” L single-rate 464.95 1310-0584 13” L (stock length) single-rate 464.95 FOR 04-10 883/1200 XLH 1310-0583 11.00” L single-rate (100-160 lb. rider) 464.95 1310-0582 11.75” L single-rate (175-225 lb. rider) 464.95 1310-0581 13.25” L (stock length) dual-rate (175-225 lb. rider) 519.95 FOR 88-03 XL 1310-0580 11.75” L single-rate; black 464.95 1310-0579 12.5” L dual-rate 519.95 1310-0578 13.75” L (stock length) dual-rate 519.95
PART # DESCRIPTION FOR 94-10 FLT/FLHT (CONT) DS-310095 13” L dual-rate w/ ARS (400 lb. total weight) DS-310037 13” L dual-rate w/ ARS (500 lb. total weight)
1310-0204
•Fully adjustable for ride height and spring preload •Makes tuning the bike’s suspension for the rider and his or her riding style easy •Shocks feature a show chrome cover •Pair of progressive-rate coil springs and purpose-designed monotube dampers provide superior suspension performance •Dampers feature a nitrogen charge that eliminates internal oil cavitation and helps create a consistent ride while resisting heatinduced fade •Shocks can be adjusted up to 2” lower than stock •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1310-0205 00-10 FXST/FLST, 08-10 FXCW $499.95 1310-0204 89-99 FXST/FLST 599.95
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $565.95 565.95
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
975
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST 1310-0194
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
1310-0195
DRAG SPECIALTIES ADJUSTABLE SHOCKS FOR FXST/FLST •Shock length can be adjusted to be the same as stock, or up to 2” lower to achieve just the right look or seat height •Fully adjustable spring pre-load •Improved multi-stage, velocity-sensitive internal valving with hydraulic anti-bottoming for a comfortable, jolt-free ride •Freon-gas cell used for fade-free shock operation •Double-walled construction for extra durability •Available with a chrome finish for a custom look PART # DESCRIPTION •Manufactured to Drag Specialties specifications 1310-0194 For 00-10 FXST/FLST, 08-10 FXCW/C models by Progressive Suspension 1310-0195 For 89-99 FXST/FLST models •Sold in pairs 1310-0229 For 84-88 FXST/FLST models •Made in the U.S.A.
SUG. RETAIL $465.95 565.95 565.95
GASKETS & SEALS ELECTRICAL ADJUSTABLE SHOCK ABSORBERS
LIGHTING
•High-performance shock will improve the handling of your Buell •Feature chrome body with remote reservoir and single-rate spring •Measure the existing shock from mounting eye to mounting eye to obtain the correct length replacement shock •Made in the U.S.A.
HANDLEBARS, CONTROLS & MIRRORS CABLES DS-310154
PART # DESCRIPTION SUG. RETAIL FOR ALL 94-02 BUELL MODELS (175-225-LB. RIDER) DS-310154 16.5” L w/ adjustable pre-load $699.95 DS-310153 16.5” L w/ adjustable pre-load, rebound damping and compression damping 905.95 DS-310157 14.8” L w/ adjustable pre-load 699.95 DS-310156 14.8” L w/ adjustable pre-load, rebound damping and compression damping 905.95
BRAKES DS-310080
DS-310079
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE ADJUSTABLE SHOCKS PLATE FRAMES •Available in chrome/polished aluminum finish or black wrinkle/black anodized finish TIRES, •Feature a large 113/16” diameter damping piston TUBES & •Adjustable, which allows lowering the bike up to 13/4” WHEELS •Heavy-duty shocks available for riders 250+ lb. HARDWARE, •Rebuildable; made in the U.S.A. DESCRIPTION CHEMICALS PART # FOR 00-10 FXST, FLST & TOOLS DS-310084 Standard, chrome Heavy-duty, chrome COVERS, 1310-0081 Standard, black SECURITY DS-310085 Heavy-duty, black & GENERAL 1310-0082
976
SUG. RETAIL $699.95 699.95 595.95 595.95
PART # DESCRIPTION FOR 84-99 FXST, FLST DS-310079 Standard, chrome 1310-0079 Heavy-duty, chrome DS-310080 Standard, black 1310-0080 Heavy-duty, black
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $699.95 699.95 595.95 595.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE AIR LOGIC LEVELING SUSPENSION KIT •Included electronic sensor automatically controls the air pressure in the Airide springs to achieve proper ride height depending on the weight of the rider/riders and cargo, eliminating over or under inflation of air bags due to operator error, and the distraction of adjusting a manual switch while riding •Features Firestone Airide springs for proper expansion and strength •Bilstein gas shocks specifically valved for the FLT models •On-board air compressor included •CNC-machined aluminum shock mount and bag mount •Spherical bearings in top shock mounts •All necessary hardware, air lines and mounting brackets included •Made in the U.S.A. PART # 1310-0376
DESCRIPTION For 86-08 FLT, FLHT, FLHR and FLTR
SUG. RETAIL $1,778.95
1310-0524 1310-0523
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
AIR OVER GAS PERFORMANCE SHOCK KITS •High-quality air-ride system specifically designed for H-D Touring models •Chrome Bilstein shocks custom valved with top mounted heavy-duty spherical bearings •Chromed CNC-machined billet aluminum top shock cover adds a custom finished look •Shocks are Firestone factory wrapped with an air ride purpose-built Firestone air bag •Air bags are specifically developed for air ride suspensions taking into consideration the use of proper expansion and strength characteristics •Compressor kit mounts out of sight with custom bracket and easy plug-n-play wiring harness •PART #1310-0523 includes two Bilstein shocks with Firestone air bags designed for use with existing OEM airlines and complete installation instructions •PART #1310-0524 includes two Bilstein shocks with Firestone air bags, Alloy Arts air compressor kit (PART #1304-0294), custom wire harness with micro toggle switch, pressure gauge, all hardware/brackets, airlines needed and complete installation instructions •PART #1304-0294 is just the manual-adjust compressor kit only; includes a high-quality air compressor, all mounting brackets and hardware, as well as complete wiring harness, micro toggle switch, pressure gauge and complete instructions •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 86-10 FLT, FLHT, FLHR, FLHX, FLTR MODELS 1310-0523 Performance shock kit w/o compressor $799.95 1310-0524 Performance shock kit w/ compressor 1,499.95 1304-0294 Compressor kit only 497.95
All part numbers in BOLD MAGENTA are new for 2010.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
977
SECTION
17
WINDSHIELDS TOURING AIR DRAGGER AIR SHOCKS
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
•Adjustable ride height air shocks •Air adjustable shock length can lower the bike up to 2” •Designed to be easily connected to the stock air lines found on most touring models •Optional air line kit available for simple installation on models without OEM air shocks •Integrated air and coil shock •Multi-stage velocity sensitive damping •Connection kit required for 84-96 FLT/FLHT models, sold separately •Optional, easy to install compressor sold separately •Made in the U.S.A.
1304-0222
1310-0448
NOTE: Some or all shocks listed have TUV approval. Refer to most recent TUV certificate for current listing. PART # DESCRIPTION 1310-0448 84-10 FLT/FLHT Air Dragger shocks 1304-0211 84-96 FLT/FLHT Air line 1304-0222 Optional compressor
SUG. RETAIL $499.95 37.95 459.95
722-1002 1304-0214
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
AIRTAIL SHOCKS AND COMPRESSOR KIT •The Airtail system uses one shock similar to the current FXST/FLST shocks while the other uses dual air chambers •One chamber is for bottoming control – regardless of passenger or solo rider this raises bike to keep from bottoming when loaded •Second chamber is filled to lower the bike to desired height; with first chamber still filled there are no worries about bottoming-out •Shocks come standard with a manual fill system; optional on-board air compressor gives you maximum adjustability and on-the-fly suspension control •Combine this with the on-board compressor and you can adjust every aspect of your shocks with the touch of a button •Shock absorbers sold in pairs •Made in the U.S.A. NOTE: Not for use on FXCW and FXCWC models. NOTE: It is not recommended that bike be lowered more than 2”.
BRAKES TANKS & OIL FILTERS
PART # DESCRIPTION SHOCK ABSORBERS FOR FXST/FLST 722-1002 00-10 FXST/FLSTN 722-1001 89-99 FXST/FLST COMPRESSOR KIT (INCLUDES ON-BOARD COMPRESSOR AND MANUAL CONTROL SWITCH) 1304-0214 07-10 FXST/FLSTN 30-5101 00-06 FXST/FLST 30-5100 89-99 FXST/FLST
SUG. RETAIL $822.95 822.95 751.95 751.95 751.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
978
AIR TRACKER SHOCKS •150-450 lb. adjustment range for rider and load allows for dialing in of riding comfort and performance •High-pressure, gas-charged, 7075 T-6 aluminum shock delivers superior ride quality •Corrosion-resistant, stainless steel pressure cylinder takes the place of springs and adds a smooth, uncluttered look •Designed for easy fill-up from garage or gas station air; units typically require only 50 to 90 psi •Sold in pairs •Made in the U.S.A.
1310-0592
PART # DESCRIPTION FOR 02-06 VRSC, 07-10 VRSCD 1310-0592 12.00” L 1310-0595 12.50” L 1310-0598 13.00” L FOR 84-10 FLT, FLHT, FLHR 1310-0594 12.00” L 1310-0597 12.50” L 1310-0600 13.00” L
SUG. RETAIL $499.95 499.95 499.95 499.95 499.95 499.95
PART # FOR 91-10 DYNA 1310-0592 1310-0595 1310-0598 FOR 88-94 FXR 1310-0594 1310-0597 1310-0600
DESCRIPTION
SUG. RETAIL
12.00” L 12.50” L 13.00” L
$499.95 499.95 499.95
12.00” L 12.50” L 13.00” L
499.95 499.95 499.95
PART # FOR 91-10 XL 1310-0594 1310-0597 1310-0600
All part numbers in BOLD MAGENTA are new for 2010.
DESCRIPTION 12.00” L 12.50” L 13.00” L
SUG. RETAIL $499.95 499.95 499.95
SECTION
17
WINDSHIELDS TOURING 1311-0094 1311-0093
LUGGAGE SEATS & SISSY BARS
FL108 AIR SUSPENSION •Designed for ride quality; no bottoming-out under any load condition •Exclusive Gates™ Kevlar® air spring technology •Compressor mounts between frame rails •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •Spherical bearings in shocks eliminate shock binding •Suspension system installs in stock location; no modifications necessary •Color-coded plug-and-play wiring for quick and easy installation •System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability •Adjustable from stock height (13”) down 23/4” PART # DESCRIPTION •Optional chrome handlebar mounted switch available separately (PART #0616-0039) •Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately FOR 08-10 FLHT, FLHR, FLTR 1311-0093 Black •Made in the U.S.A. 1311-0094 Chrome NOTE: Not recommended for FLHX, FLHRS models.
1311-0095
EXHAUST FUEL/AIR SYSTEMS ENGINE SUG. RETAIL $1,599.95 1,599.95
TRANSMISSION & DRIVELINE GASKETS & SEALS
1311-0091
ELECTRICAL 1311-0092
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
1311-0096
BRAKES TANKS & OIL FILTERS FL708 AIR SUSPENSION •Designed for ride quality; no bottoming-out under any load condition •Exclusive Gates™ Kevlar® air spring technology •Compressor mounts between frame rails •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •Spherical bearings in shocks eliminate shock binding •Suspension system installs in stock location; no modifications necessary •Color-coded plug-and-play wiring for quick and easy installation •System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability •Adjustable from stock height (13”) down 13/4” •Optional chrome handlebar mounted switch available separately (PART #0616-0039) •Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately •Made in the U.S.A. NOTE: Not recommended for FLHX, FLHRS models. PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLHX, FLTR LO-PRO EQUIPPED MODELS (EXCEPT FLHRSE) 1311-0095 Black 1311-0096 Chrome
SUG. RETAIL
$1,599.95 1,599.95
XL1/XL786 AIR SUSPENSION •Exclusive Kevlar® air spring technology •Best ride quality; no bottoming-out under any weight or road condition •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •CNC-machined from 6061 T-6 and 2011 aluminum •Suspension system installs in stock location; no modifications necessary •Downward adjustable 21/2” from 12” •Color-coded plug-and-play wiring for quick and easy installation •Systems include rider-friendly black handlebar switch for easy “on the go” adjustability, on-board air compressor, solenoid valve and necessary hardware •Performance and quality proven under extensive testing since 1998 •Optional chrome handlebar mount switch assembly available separately (PART #0616-0039) •Made in the U.S.A. PART # DESCRIPTION FOR 04-10 XL MODELS (XL1 SERIES) 1311-0091 Black 1311-0092 Chrome FOR 86-03 XL MODELS (XL786 SERIES) 1311-0097 Black 1311-0098 Chrome
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $1,599.95 1,599.95 1,599.95 1,599.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
979
SECTION
17
WINDSHIELDS TOURING 1311-0070 2404-1001
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
L1/D1/V1 AIR SUSPENSION •Designed for ride quality; no bottoming-out under any load condition •Exclusive Gates™ Kevlar® air spring technology •Compressor mounts between frame rails •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •Spherical bearings in shocks eliminate shock binding •Suspension system installs in stock location; no modifications necessary •Color-coded plug-and-play wiring for quick and easy installation •System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability •L1 and D1 adjust from stock height (13”) down 31/4”; V1 adjusts from stock height (13”) down 21/2” •Optional chrome handlebar mounted switch available separately (PART #0616-0039) •Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately for L1 •Made in the U.S.A. NOTE: Not recommended for FLHX, FLHRS models. PART # DESCRIPTION FOR 99-07 FLT, FLHT, FLHR, FLTR (L1 CT SERIES) 2404-1001 Chrome 1311-0070 Black FOR 85-98 FLT, FLHT, FLHR, FLTR (L1 CE SERIES) 2404-1000 Chrome
SUG. RETAIL $1,599.95 1,599.95 1,599.95
PART # DESCRIPTION FOR 99-10 FXD MODELS (D1 SERIES) 7807-0027 Chrome 1311-0069 Black FOR 02-10 VRSCA/B/D V-ROD MODELS (V1 SERIES) 7807-0026 Chrome 1311-0071 Black
SUG. RETAIL $1,599.95 1,599.95 1,599.95 1,599.95
LIGHTING 1311-0076
HANDLEBARS, CONTROLS & MIRRORS
1311-0075
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
980
L7 AIR SUSPENSION •Replaces the OEM accessory Low Touring shocks •Works great in conjunction with the OEM accessory front end lowering kits •Exclusive Kevlar® air spring technology •Best ride quality; no bottoming-out under any weight or road condition •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •CNC-machined from 6061 T-6 and 2011 aluminum •Suspension system installs in stock location; no modifications necessary •Systems include rider-friendly black handlebar switch for easy “on the go” adjustability, on-board air compressor, solenoid valve and necessary hardware •Measures 9.5” compressed, 12” extended •Color-coded plug-and-play wiring for quick and easy installation •Optional chrome handlebar mount switch assembly available separately (PART #0616-0039) PART # DESCRIPTION SUG. RETAIL •Optional fairing mounted gauge and bezel for FLHT FOR 86-07 FLT, FLHT, FLHR, FLHX, FLTR LO-PRO EQUIPPED MODELS (EXCEPT FLHRSE) and FLTR models also available separately; see below 1311-0075 Black $1,599.95 •Made in the U.S.A. 1311-0076 Chrome 1,599.95 NOTE: Not recommended for FLHRS, FLHX models.
2212-0179
FAIRING MOUNTED GAUGES •Made from 6061 billet aluminum •Features a black or white face with Legend logo •Push-to-connect fitting •0-300 psi full sweep air pressure gauge •Fits into accessory gauge port on FLHT fairings; replaces air temperature gauge on FLTR fairings
2212-0289
PART # 2212-0179 2212-0289
DESCRIPTION W/ black face W/ white face
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $135.95 134.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE LTR1 HD-B AIR SUSPENSION
SEATS & SISSY BARS
•Designed for ride quality; no bottoming-out under any load condition •Exclusive Gates™ Kevlar® air spring technology •Spherical bearings in shocks eliminate shock binding •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •Suspension system installs in stock location; no modifications necessary •Color-coded plug-and-play wiring for quick and easy installation •System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability •Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately •Made in the U.S.A. PART # 1311-0077
EXHAUST
DESCRIPTION For 99-07 Lehman Touring Trikes
SUG. RETAIL $1,599.95
FUEL/AIR SYSTEMS ENGINE
1311-0063 1311-0047
TRANSMISSION & DRIVELINE
1311-0046 1311-0064
GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1311-0068
CABLES BRAKES
L3/L9 COMPACT-STYLE AIR SUSPENSION
L2/L8 AIR SUSPENSION •Designed for ride quality; no bottoming-out under any load condition •Exclusive Gates™ Kevlar® air spring technology •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •Suspension system installs in stock location; no modifications necessary •Color-coded plug-and-play wiring for quick and easy installation •System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability •Adjustable from stock height down 3” •System includes universal two way micro toggle switch •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR 00-09 FXST/FLST (L2) FOR 89-99 FXST/FLST (L8) 1311-0063 Machined $1,170.95 1311-0066 Machined $1,170.95 1311-0064 Black 1,199.95 1311-0067 Black 1,199.95 1311-0065 Chrome 1,285.95 1311-0068 Chrome 1,285.95
•More compact than the L2/L8 models •Designed for ride quality; no bottoming-out under any load condition •Exclusive Gates™ Kevlar® air spring technology •Deflective disc dampening offers a smooth ride and eliminates annoying pogo •Suspension system installs in stock location; no modifications necessary •Color-coded plug-and-play wiring for quick and easy installation •System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability •Adjustable from stock height down 23/4” •Optional chrome handlebar mounted switch available separately (PART #0616-0039) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 00-10 FXST/FLST (L3) 1311-0046 Chrome $1,799.95 1311-0045 Black 1,599.95 FOR 89-99 FXST/FLST (L9) 1311-0048 Chrome 1,799.95 1311-0047 Black 1,599.95
CHROME HANDLEBAR MOUNT SWITCH ASSEMBLY •Optional 1” handlebar switch assembly updates the black switch assembly that comes with the shocks •Works with all Legend suspension systems except the L2 and L8 Softail systems •Made in the U.S.A. PART # DESCRIPTION 0616-0039 Switch assembly
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $161.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
981
SECTION
17
WINDSHIELDS 1311-0060
TOURING LUGGAGE
Shown fully lowered
SEATS & SISSY BARS EXHAUST Shown fully raised
FUEL/AIR SYSTEMS
1304-0084 GP-0-100
AIRTAIL™ I.A.S. SHOCKS AND COMPRESSOR KIT
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
•Integrated air and coil shock absorber •Uses a linear rate coil combined with dual-chamber air shocks for a smooth ride and ultimate suspension control •Inertia Active System (I.A.S.) with Inertia Valve technology separates wheel movement from chassis movement •One air chamber for bottoming control and adjusting suspension for the bike’s load •The second air chamber adjusts ride height •Shocks come standard with a manual fill system for use with a hand pump PART # DESCRIPTION PART #GP-0-100 (sold separately) 84-10 FLT/FLHT/FLHR/FLTR •Optional on-board air compressor kit for Dressers gives you maximum adjustability 1311-0060 Airtail shocks and on-the-fly suspension control 84-07 FLT/FLHT/FLHR/FLTR MODELS •Compressor kit fits 84-07 models only, sold separately 1304-0084 Airtail compressor kit •Compressor kit is now compatible with models equipped with cruise control HAND PUMP FOR MANUAL FILL •Shock absorbers sold in pairs GP-0-100 0-100 PSI hand pump •Made in the U.S.A.
ELECTRICAL
SUG. RETAIL $999.95 734.95 49.95
Shown fully lowered
LIGHTING AIRTAIL™ I.A.S. SHOCKS
HANDLEBARS, CONTROLS & MIRRORS
•Integrated air and coil shock absorber •Uses a linear rate coil combined with dual-chamber air shocks for a smooth ride and ultimate suspension control •Inertia Active System (I.A.S.) with Inertia Valve technology separates wheel movement from chassis movement •One air chamber for bottoming control and adjusting suspension for the bike’s load •The second air chamber adjusts ride height •Shocks come standard with a manual fill system for use with a hand pump PART #GP-0-100 (sold separately) •Shock absorbers sold in pairs •Made in the U.S.A.
1311-0061
CABLES BRAKES GP-0-100
TANKS & OIL FILTERS DASHES & GAUGES
Shown fully raised
PART # 1311-0061 GP-0-100
DESCRIPTION 91-10 Dyna 0-100 PSI hand pump
SUG. RETAIL $1,318.95 49.95
1311-0053 1311-0054
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, FULLY-ADJUSTABLE REAR AIR SHOCKS TUBES & •The latest advance in rear air shocks from Works Performance come complete with air-spring and damper unit with internal spring, WHEELS •Systems compressor pump, stainless-steel-sheathed hoses, wiring, fittings, switches and relays HARDWARE, •Fully adjustable over a range of up to 500 lb., down to the lightest rider feature allows the rider to run the shocks at full length and travel while riding, yet lower the bike for cruising or when parked CHEMICALS •Air •Also designed to “run flat” in an emergency, which means that should an air line failure occur, the bike can still be ridden at a reduced speed, & TOOLS plus the system deflates slowly to allow the rider time to safely react •Black housing with polished billet compressor brackets and switch mount PART # DESCRIPTION SUG. RETAIL COVERS, •Adjusts to lower bike 13/4” 1311-0054 For 00-10 FXST, FLST $1,499.95 SECURITY •Sold in pairs 1311-0053 For 89-99 FXST, FLST $1,499.95 & GENERAL •Made in the U.S.A.
982
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
WINDSHIELDS TOURING
413 SERIES 15” SHOCKS 416 SERIES AIR SHOCKS •Manufactured from the finest materials available •Designed specifically for Harley models •416 series air shocks have air adjustability to allow fine tuning for safety and heavy loads, plus multistage automatic valving adjusts for all conditions; brushed aluminum with clear anodized finish •TUV approved •Made in the U.S.A. APPLICATION LENGTH PART # For 84-10 FLT, FLHT, FLHS, FLHR, FLTR 12.5” DS-222005 13” DS-2220061 For 84-86 FXR, 86-10 XL models 12.5” DS-222005 13.5” DS-222007 1
SUG. RETAIL $399.95 399.95 399.95 399.95
02-05 FLHR recommended shock is slightly longer than stock. This may alter the head angle slightly and provide somewhat quicker steering.
•Progressive puts its expertise to work for high-performance applications •Longer than stock for increased travel and ground clearance •Freon-cell gas system for fade resistance and superior damping characteristics •Proper rates provide stability •Sold in pairs •TUV approved •Made in the U.S.A. PART # DESCRIPTION DS-310063 For 84-10 XL
LUGGAGE SEATS & SISSY BARS SUG. RETAIL $277.95
FUEL/AIR SYSTEMS REPLACEMENT SPRINGS FOR PROGRESSIVE SUSPENSION 12- AND 412-SERIES SHOCKS
DS-222014
ENGINE DS-310030
•Various rates allow fine-tuning for specific needs •Choice of highly chromed and black springs •Sold in pairs •Made in the U.S.A.
12 SERIES 11.5” SHOCKS WITHOUT SPRINGS •Gas-charged with fade-free damping and consistent operation •Automatic, six-stage damping adjusts to a variety of conditions •Special cams allow easy preload adjustment •Springs sold separately; available in a variety of rates; PART #s DS-222014-16 and DS-310030-32 are recommended •TUV approved •Made in the U.S.A. NOTE: All shocks are measured center-of-eyelet to center-of-eyelet. PART # DESCRIPTION SUG. RETAIL DS-310049 For 86-03 XL, 84-94 FXR, 84-10 FLT/FLHT/FLHR/FLTR $202.95
EXHAUST
TRANSMISSION & DRIVELINE
NOTE: These springs must be ordered when ordering 12-series shocks. However, they can be used as replacements for the 412-series shocks. PART # DESCRIPTION SUG. RETAIL DS-2220141 70-120 psi chrome springs (std. spring on chrome 4000 series shocks) $92.95 DS-3100301 70-120 psi black springs (std. spring on black 4000 series shocks) 76.95 92.95 DS-2220151 95-140 psi chrome springs DS-3100311 95-140 psi black springs 76.95 DS-2220161 105-150 psi chrome springs 92.95 DS-3100321 105-150 psi black springs 76.95 DS-310035 125-170 psi black springs 76.95 PS-1370C 90-130 psi chrome spring for 11.5” shocks only 92.95 PS-1370B 90-130 psi black spring for 11.5” shocks only 76.95 PS-1375C 115-155 psi chrome springs for 11” and 11.5” shocks only 92.95 1
These springs will not fit shock PART #s DS-222003, DS-222009 or DS-310087.
GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES
GOLD VALVE SHOCK KIT •Bolt-on shock valving for riders serious about suspension performance •Improve control, traction, plushness and resistance to bottoming •Any qualified mechanic can install them PART # DESCRIPTION SMGV-S4001 For 99 X1 models (40mm x 12mm)
TANKS & OIL FILTERS
FRONT SHOCK
SUG. RETAIL $169.95
•Chrome replacement shock for all OEM Springer forks •Features plush damping with more ride control •Made in the U.S.A. PART # DESCRIPTION DS-310094 For 88-06 FXSTS, 97-03 FLSTS, 05-07 FLSTSC and 08-10 FLSTSB models
SUG. RETAIL $199.95
BIG SHOCK SPRINGS
31 SERIES SPRINGER DAMPER •Velocity-sensitive damping provides superior damping performance •Attractive chrome finish •Dual-wall construction for extra durability •Made in the U.S.A. PART # DESCRIPTION DS-311001 For 97-10 FLSTS, 05-10 FLSTSC/FLSTSB 88-10 FXSTS Springer models
SUG. RETAIL $184.95
•Ideal for lowered Softails •Stronger than stock springs; prevent bottoming out •Big Red springs are recommended for solo riders; rated for 1200 psi •Big Blue springs are recommended if occasionally carrying a passenger or the rider weight is 220-290 lb.; rated for 1300 psi 1312-0131 •Big Gray springs are for lowered machines that often carry passengers or the rider weight is 300+ lb.; rated for 1400 psi •Fit OEM and Progressive Suspension shock absorbers PART # DESCRIPTION SUG. RETAIL FOR 89-07 FXST 1312-0131 Big Red shock springs $149.95 1312-0132 Big Blue shock springs 149.95 1312-0133 Big Gray shock springs 149.95
All part numbers in BOLD MAGENTA are new for 2010.
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
983
SECTION
17 DS-222180
WINDSHIELDS TOURING
1304-0165 1310-0391
LUGGAGE
COMPLETE LOWERING KITS •Lowers the front and rear using one kit •Kit includes shortened dampers, rear shock adjusters and a shortened chrome kickstand •Uses OEM front springs
SEATS & SISSY BARS
NOTE: Ground clearance and tire clearance must be checked when installing these kits.
EXHAUST
1310-0392
PART #
DESCRIPTION
DS-222180
For 00-06 FXST/FLST exc. Springer and Deuce (lowers FXST front 21/2”, FLST front 2”, back 11/2”) For 07-08 FLHT, FLTR
1304-0165
FUEL/AIR SYSTEMS
SUG. RETAIL $178.95 241.95
1304-0168
DS-221800
ENGINE REAR ADJUSTABLE LOWERING KITS •Gives bike a sleek, low profile •Lower from 1-2” •Each kit includes mounting hardware or is designed to use factory hardware •Made in the U.S.A.
TRANSMISSION & DRIVELINE GASKETS & SEALS
NOTE: Check all clearances prior to riding. PART #
DESCRIPTION
DS-221800
For 00-10 FXST/FLST (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC) For 89-99 FXST/FLST
SLAMMER KITS
ELECTRICAL LIGHTING
•Complete lowering kit includes shocks with chrome springs and covers (unless noted) and fork springs •Easy to install fork springs that do not require the removal of forks •Drop-in fork springs lower front end up to 2” •Shocks lower rear up to 21/2” •Made in the U.S.A. NOTE: Not for 1200S models.
HANDLEBARS, CONTROLS & MIRRORS CABLES
PART #
FITS MODEL
1310-0391 1310-0392 1310-05721 1310-0469 1310-0470 1310-0471
For 88-03 XL For 04-10 XL For 04-10 XL For 91-05 FXD (except FXDWG) For 06-10 FXD For 84-10 FLT/FLHT/FLHR/FLTR w/o cartridge style forks
1
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
SUG. RETAIL $299.95 299.95 299.95 299.95 299.95 299.95
1304-0168
DS-305050 •Adjustable from stock height to 2” lower than stock •Kits for early 84-88 will only fit Progressive FXST/FLST shocks •Kits for late 89-99 FXST/FLST will fit both the stock shocks and Progressive FXST/FLST shocks •Made in the U.S.A. PART #
DESCRIPTION
DS-305050
Chrome, all 00-10 FXST/FLST OEM shocks only (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW/FXCWC) Chrome, 89-99 OEM and Progressive shocks
SUG. RETAIL $128.95 128.95
1304-0210
ADJUSTABLE REAR LOWERING KIT
1304-0076 1304-0075
•Made from 1144 stress-proof steel 1304-0149 •Zinc-plated finish •Lowers the rear of the motorcycle up to a full 2” lower than stock •Accepts all factory mounting hardware PART #
DESCRIPTION
1304-0210 1304-0149
For 88-99 FXST, FLST models For 00-10 FXST, FLST models (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW/C)
SUG. RETAIL $94.95
REAR ADJUSTABLE LOWERING KITS •Reduces height as much as two inches •Once installed, look and feel of the bike DESCRIPTION SUG. RETAIL can be customized PART # 1304-0076 For 00-10 FXST, FLST models (except to rider’s 08-10 FXCW/C, 05-10 FLSTN, 07 FXSTD) $55.95 preference 74.95 •Made in the U.S.A. 1304-0075 For 89-99 FXST, FLST models
54.95 FRAMES, SUSPENSION & FENDERS SHOCK LOWERING KITS DS-221900 •Lower the rear of any FXST/FLST FOOTRESTS •Available in standard and adjustable height versions & LICENSE •Standard kits have four machined spacers and a special PLATE FRAMES shock disassembly tool for 84-88 models, two new shock end rods and six special nylon washers for 89-99 models TIRES, •Adjustable kits are fully DS-221901 DS-221902 DS-310083 adjustable without TUBES & DS-310075 DESCRIPTION having to remove shock PART # WHEELS STANDARD KITS mounting bolts DS-221902 For 00-10 FXST, FLST (1” lower) (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC) HARDWARE, and feature a sealing DS-310075 For 89-99 FXST, FLST (1 / ” lower) design to protect the CHEMICALS heim bearings from ADJUSTABLE RIDE HEIGHT KITS DS-221900 For 00-10 FXST, FLST (0” to 1 / ” lower) (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC); chrome/gold anodized finish & TOOLS the elements DS-221901 For 00-10 FXST, FLST (0” to 1 / ” lower) (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC); silver zinc finish •Both come with COVERS, DS-310083 For 89-99 FXST, FLST (up to 2” lower); chrome finish instructions for DS-310072 For 89-99 FXST and FLST (up to 2” lower); standard finish SECURITY easy installation DS-310071 For 84-88 FXST and FLST (up to 2” lower); standard finish & GENERAL •Made in the U.S.A. 1
4
1 1
984
$69.95 104.95
FXST/FLST LOWERING KITS
DS-305046
Black shock springs and covers.
SUG. RETAIL
4 4
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $72.95 79.95 109.95 99.95 129.95 99.95 99.95
SECTION 1304-0299
1304-0301
17
1304-0300
WINDSHIELDS TOURING LUGGAGE 1304-0221 1304-0207 1304-0206
EXHAUST
1304-0298
LOWERING KITS
SEATS & SISSY BARS
•All kits are CNC-machined from 6061 billet aluminum unless noted in chart •Black anodized or chrome finish •Come complete with all necessary mounting hardware and instructions •FXD kits not for use with FXDB, FXDL, FXDS, FXDXT
FUEL/AIR SYSTEMS
NOTE: Rear lowering kits are not to be used in conjunction with “shorty” or “low-profile” shocks. NOTE: Check all clearances before operating.
ENGINE
NOTE: Not for use on Hugger, 883/1200C/883L/1200L/1200N models. PART # CHROME 1304-0301 1304-0298 1304-0299 1304-0300 BLACK 1304-0221 1304-0207 1304-0208 1304-0150 1304-0151 1304-0153 1304-0206 1304-0209 1304-0277
DESCRIPTION
SUG. RETAIL
1304-0209 For For For For
02-10 95-05 06-10 05-10
FLHT/FLHR/FLTR (except FLHRS, FLHRC) (steel construction) - 1” drop Dyna Glide - 1.5” drop Dyna Glide - 1” drop XL - 1” drop
$109.95 109.95 109.95 109.95
For For For For For For For For For
02-10 FLHT/FLHR/FLTR (except FLHRS, FLHRC) (steel construction) - 1” drop 97-01 FLT, FLHT, FLHR, FLTR - 1” drop 85-96 FLT, FLHT, FLHR - 1.5” drop (steel construction) 95-05 Dyna Glide - 1.5” drop 06-10 Dyna Glide - 1” drop 05-10 XL - 1” drop 00-04 XL - 1” drop L89-99 XL - 1” drop 02-10 V-Rod
104.95 94.95 94.95 104.95 104.95 104.95 94.95 94.95 94.95
DS-221454
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING
1304-0277
HANDLEBARS, CONTROLS & MIRRORS
DS-221462
CABLES BRAKES DS-221455
TANKS & OIL FILTERS
DS-221443
REAR LOWERING KITS •Kits are available in chrome and powder-coat black steel •Simple bolt-on installation; comes with mounting hardware •Designed for OEM and most aftermarket stock length shocks •97-10 FLHT models are lowered approximately 1”; 85-96 FLHT, FLT models are lowered approximately 1.5” using OEM air shocks (not for FLHX, FLHRCI, FLHRS/SI models) •91-10 FXD models are lowered approximately 1” (not for FXDB, FXDL, FXDS, FXDXT) •86-10 XL models are lowered approximately 1”; wheel travel is reduced 1/2” for stock (not for Hugger and 883 or 1200 Custom Deluxe, 883L, 1200L, 1200N, XL50) •87-94 FXR models are lowered approximately 2” (not for FXRT, FXRP) •Made in the U.S.A.
DASHES & GAUGES
DS-221468
NOTE: Rear lowering kits are not to be used in conjunction with “shorty” shocks or “low-profile” shocks. NOTE: Fender-to-belt and tire clearance must be checked along with frame and exhaust clearance. Saddlebags may require spacing. PART # CHROME DS-221476 DS-221454 1304-0103 1304-0111 DS-221905 DS-221455
DESCRIPTION For For For For For For
97-01 FLHT/FLHR/FLTR 85-96 FLT/FLHT/FLHR 06-10 FXD 05-10 XL 00-03 XL L89-99 XL
SUG. RETAIL $124.95 104.95 124.95 119.95 94.95 94.95
PART # BLACK 1304-0341 1304-0091 DS-221475 DS-221443 1304-0102 DS-221903
DESCRIPTION For For For For For For
09-10 02-08 97-01 85-96 06-10 00-01
FLHT/FLHR/FLTR FLHT/FLHR/FLTR FLHT/FLHR/FLTR FLT/FLHT/FLHR FXD FXD
SUG. RETAIL $119.95 98.95 104.95 104.95 119.95 119.95
DS-221446 PART # DESCRIPTION BLACK (CONT) DS-221462 For 91-99 FXD 1304-0110 For 05-10 XL DS-221468 For 00-03 XL DS-221446 For L89-99 XL
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $109.95 109.95 79.95 79.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
985
SECTION
17 1304-0204
WINDSHIELDS 1304-0171
TOURING LUGGAGE
1304-0172
1304-0170
1304-0340
STANDARD DROP REAR LOWERING KITS
SEATS & SISSY BARS EXHAUST
•Gives your bike a sleek, low profile •Finished in black or polished to match factory swingarm •Lowers approximately 1” •Each kit includes required mounting hardware or is designed to use factory hardware •Made in the U.S.A.
REAR SHOCK LOWERING BRACKET KIT
NOTE: Check all clearances prior to riding. NOTE: Not for use on Hugger 883/1200C, 883L/1200L, 1200N models.
FUEL/AIR SYSTEMS ENGINE
PART # 1304-0170 1304-0179 1304-0172 1304-0173 1304-0171
DESCRIPTION For 91-99 Dyna models (except FXDWG) For 02-10 FLT, FLHT models For 02-10 V-Rod models w/ 180mm rear tire only (except Screamin’ Eagle) For 00-03 XL For 89-99 XL
SUG. RETAIL $115.95 169.95 104.95 108.95 108.95
•Makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with its lower center of gravity •Lowers your bike 1” leaving adequate room for stock tire-to-fender clearance; designed to retain the use of the stock rubber shock boot •CNC-machined from billet steel with a black finish •Easy to install in approximately 30 minutes with common tools, and includes instructions and hardware •Made in the U.S.A. NOTE: Saddlebag modification necessary for installation on FLHRC models. PART # 1304-0204 1304-0340
DESCRIPTION For 02-10 FLHT, FLHR, FLHX, FLTR (except FLHRC/FLHRS) For 97-01 FLHR, FLHT, FLTR models
SUG. RETAIL $132.95 122.95
TRANSMISSION & DRIVELINE 440 RETRO FIT COVER KIT GASKETS & SEALS ELECTRICAL
•Update the look of your 440 series shocks with this stylish cover kit •Available in chrome •Sold in pairs •Made in the U.S.A. PART # 1320-0008
DESCRIPTION Chrome
SUG. RETAIL $124.95
CHROMED SHOCK TOP STUD COVERS
DS-310012
PART # DS-310012
SUG. RETAIL
DS-310011
DESCRIPTION For 84-94 FXR except FXRT, 86-90 XL; repl. OEM #54707-88A (pr.) For 85 FX; 85-86 FXWG; repl. OEM #54704-65 (pr.)
PS-5027C
DS-310124
LIGHTING CHROME SHOCK HANDLEBARS, COVER KITS FOR CONTROLS PROGRESSIVE SHOCKS
& MIRRORS CABLES BRAKES
TANKS & OIL FILTERS DASHES & GAUGES
10.95
DS-310125
PS-5028C
•Available for Progressive 412 series shocks on various H-D models •Sold in pairs •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL PS-5028C Top covers for 11” Progressive shocks (DS-222013) on 85-86 FX, 85-86 FXWG; and 11” Progressive shocks (DS-310061) on 91-10 Dyna Glide models $86.95 PS-5029C Top covers for 12” Progressive shocks (DS-222004) on 85-86 FX, 85-86 FXWG; and 12” Progressive shocks (DS-310060) on 91-10 Dyna Glide models 81.95 PS-5027C Top and bottom covers for 11” Progressive shocks (DS-310092) on 84-10 FLT, 84-94 FXR and 86-10 XL models 97.95
SOFTAIL SHOCK MOUNTING KITS •PART #DS-310124 includes two chrome shoulder bolts, four washers and two nylock nuts •PART #DS-310125 includes four chrome shoulder bolts and washers •Made in the U.S.A. PART # DS-310124 DS-310125
DESCRIPTION For 00-09 Softail models For 84-99 Softail models
SUG. RETAIL $17.95 21.95
2401-0183
DS-310182 DS-310186
FRAMES, SUSPENSION & FENDERS DS-175032 FOOTRESTS & LICENSE SHOCK STUDS PLATE FRAMES •Zinc-plated studs are available in upper and lower styles •Nylock nuts are cadmium-plated and cup washers are chrome-plated TIRES, are sold separately TUBES & •Studs •Made in the U.S.A. WHEELS PART # DESCRIPTION HARDWARE, UPPER SHOCK STUDS For 85-86 Big Twin CHEMICALS DS-310182 NUTS AND WASHERS & TOOLS 5/8”-18 thin nylock nuts (2-pk.) DS-175032 Cup washers 3/8” i.d. (10-pk.) COVERS, DS-310186 Cup washers 5/8” i.d. (10-pk.) SECURITY DS-310187 Cup washers 1/2” i.d. (10-pk.) & GENERAL DS-310188
986
$11.95
POLISHED STAINLESS STEEL SHOCK BOLT KITS •Polished to a mirror finish •Made in the U.S.A. PART # DESCRIPTION 2401-0182 For 00-10 Softail models 2401-0183 For 84-99 Softail models
SUG. RETAIL $26.95 46.95
SUG. RETAIL $15.95 2.95 2.95 2.95 2.95
THIN NYLOCK SHOCK STUD NUTS •Zinc-plated, 5/8”-18 thread •Sold in 2-packs •Made in the U.S.A. PART # DESCRIPTION 5/8”-18 thin nylock nuts DS-175032
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $2.95
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS Thickster
EXHAUST Wrapper
Uncut
FUEL/AIR SYSTEMS ENGINE Slicer
TRANSMISSION & DRIVELINE GASKETS & SEALS
Swoop
TIRE HUGGER SERIES FRONT FENDERS
Tude
ELECTRICAL
•Fenders are thick enough to add rigidity to the front end by acting like a fork brace but can still be cut or shaped enough for an even more Kustom appearance •All fenders come predrilled and E-coated and are stamped, not spun, for the ultimate smooth long-lasting fender Level •16”, 17” and 18” fenders measure 6.25” outside width and will accommodate up to a 140 series tire •21” styles measure 5.875” outside width and will fit the current 120/21 series tires on 31/2” wide rims •21” Skinny measure 4.5” outside width and will fit models listed with the stock narrow rim and a tire up to 100/100-21 •Installation requires use of Klock Werks Tire Hugger Front Fender Mounting Blocks, available separately •Made in the U.S.A.
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
NOTE: The uncut style is drilled but needs to be cut for clearance on the rotors and brakes. Make it Kustom!
PART # 16”/17”/18” 1401-0212 1401-0216 1401-0220 1401-0224 1401-0228 1401-0232 1401-0236
DESCRIPTION FRONT WHEEL Thickster Uncut Slicer Wrapper Swoop Tude Level
SUG. RETAIL $249.95 249.95 249.95 249.95 249.95 249.95 249.95
CABLES
FOR 84-10 FXST/ FXSTB/ FXSTI/ FXSTBI, 93-05 FXDWG AND CUSTOM APPLICATIONS
FOR 84-10 FLT, FLHT, FLHX, FLHR, FLTR MODELS PART # DESCRIPTION 21” FRONT WHEEL 1401-0213 Thickster 1401-0217 Uncut 1401-0221 Slicer 1401-0225 Wrapper 1401-0229 Swoop 1401-0233 Tude 1401-0237 Level
SUG. RETAIL $249.95 249.95 249.95 249.95 249.95 249.95 249.95
SUG. RETAIL
PART # DESCRIPTION 16”/18” FRONT WHEELS 1401-0210 Thickster 1401-0214 Uncut 1401-0218 Slicer 1401-0222 Wrapper 1401-0226 Swoop 1401-0230 Tude 1401-0234 Level
$249.95 249.95 249.95 249.95 249.95 249.95 249.95
PART # DESCRIPTION 21” FRONT WHEEL 1401-0211 Thickster 1401-0215 Uncut 1401-0219 Slicer 1401-0223 Wrapper 1401-0227 Swoop 1401-0231 Tude 1401-0235 Level
SUG. RETAIL $249.95 249.95 249.95 249.95 249.95 249.95 249.95
FOR 86-10 FLST (ALL EXCEPT SPRINGER) PART # DESCRIPTION 16”/18” FRONT WHEELS 1401-0258 Thickster 1401-0257 Uncut 1401-0259 Slicer 1401-0260 Wrapper 1401-0263 Swoop
SUG. RETAIL $249.95 249.95 249.95 249.95 249.95
PART # DESCRIPTION 16”/18” FRONT WHEELS (CONT) 1401-0262 Tude 1401-0261 Level 21” FRONT WHEEL 1401-0265 Thickster 1401-0264 Uncut
SUG. RETAIL $249.95 249.95 249.95 249.95
PART # DESCRIPTION 21” FRONT WHEEL (CONT) 1401-0266 Slicer 1401-0267 Wrapper 1401-0270 Swoop 1401-0269 Tude 1401-0268 Level
SKINNY FOR 84-10 FXST/ FXSTB/ FXSTI/ FXSTBI, 93-05 FXDWG AND CUSTOM APPLICATIONS WITH UP TO 100/100 SERIES TIRES (NARROW STYLE) PART # 21” FRONT WHEEL 1401-0282 1401-0280 1401-0281
DESCRIPTION Slicer Wrapper Level
SUG. RETAIL $249.95 249.95 249.95
All part numbers in BOLD MAGENTA are new for 2010.
1401-0281
SUG. RETAIL $249.95 249.95 249.95 249.95 249.95
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
987
SECTION
17
WINDSHIELDS
1401-0196 1401-0197
TOURING LUGGAGE SEATS & SISSY BARS 1401-0194
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS
WFB™ BENCHMARK FRONT FENDERS
1401-0195
•Stamped from 14-gauge U.S. steel, these 61/2” wide fenders are E-coated to prevent rust and corrosion with the lowest paint prep in the industry •Fenders are predrilled to fit 16”, 17” or 18”, or for a very radically Kustom look, 21” front wheels •Rivetless smooth sides and an extended 1.5” rear tail; fenders are a great match for any rear fender and add a clean yet dramatic flow to your stock FL •The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work •Installation requires use of Klock Blocks front fender mounting blocks available separately, PART #s 1410-0022 and 1410-0023 •The Benchmark fenders can be paired with the WFB™ rear fender to complete the Klock Werks Kustom look •Made in the U.S.A. PART # DESCRIPTION FOR 83-10 FLT, FLHT, FLHX, FLHR, FLTR MODELS 1401-0196 For 16”/17”/18” front wheel 1401-0194 For 21” front wheel
SUG. RETAIL $249.95 249.95
BENCHMARK FRONT FENDERS FOR SOFTAILS •Stamped from 14-gauge U.S. steel, these 61/2” wide fenders are E-coated to prevent rust and corrosion with the lowest paint prep in the industry •Fenders are predrilled to fit 16”/18”, or 21” front wheels •May also be used in a variety of custom applications •The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work •No mounting blocks required •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-10 FXST/FLST MODELS (EXCEPT FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS 1401-0197 16” or 18” front wheel $249.95 1401-0195 21” front wheel 249.95
CUSTOM REPLACEMENT FRONT FENDERS •5.5” and 6.5” wide, heavy-gauge 16-gauge steel construction •Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork •Comes predrilled for easy installation •Require spacers •PART #1401-0284 designed with clearance for brake lines •Handmade in the U.S.A.
1401-0139 1401-0243
1401-0284
NOTE: All measurements are approximate. PART # DESCRIPTION FOR 94-10 FLT, FLHT, FLHR, FLTR MODELS 1401-0243 51/2” W for 21” front wheel 1401-0139 61/2” W for 16” or 18” front wheel
SUG. RETAIL $224.95 239.95
PART # DESCRIPTION FOR 94-10 FLT, FLHT, FLHR, FLTR MODELS (CONT) 1401-0284 61/2” W for 16” or 18” front wheel (w/ brake line clearance) 1401-0205 61/2” W for 21” front wheel
DASHES & GAUGES
1401-0170
FRAMES, SUSPENSION & FENDERS FOOTRESTS FRONT FENDERS directly to Softail fender mounts (67/8” wide) & LICENSE •Bolts with no spacers required PLATE FRAMES •Predrilled, horizontal bolt patttern fenders fit a 90/90 tire with a 21” wheel TIRES, •4.5” •5.5” fenders fit a 120/70 tire with a 21” wheel; unless noted TUBES & •Made in the U.S.A. WHEELS FOR 84-10 FXST/FLST (EXCEPT FXSTD, SPRINGERS) DESCRIPTION SUG. RETAIL PART # DESCRIPTION HARDWARE, PART # 5.5” WIDE CHEMICALS 4.5” WIDE Long, flared $229.95 1401-0173 Long, flared & TOOLS 1401-0170 1401-0171 Short, flared 229.95 1401-0174 Short, flared Pointed, flared 229.95 1401-0175 Pointed, flared COVERS, 1401-0172 1401-0206 Long, flared SECURITY For 23” wheel. & GENERAL 1
$229.95 229.95 229.95 229.95
1
988
All part numbers in BOLD MAGENTA are new for 2010.
$239.95 239.95
1401-0171
1401-0172 SUG. RETAIL
SUG. RETAIL
SECTION Long O.C.F.
17
WINDSHIELDS
Stubby
TOURING Long O.C.F.
LUGGAGE SEATS & SISSY BARS Rambler 1401-0150
Gambler
EXHAUST FUEL/AIR SYSTEMS
Rambler 1925-0003
ENGINE Maverick Outlaw
Stinger
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
Longshot
LIGHTING
Cobra 1925-0002
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES CUSTOM FRONT FENDERS •Heavy-gauge steel construction •Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork •Comes undrilled (unless noted) so you can position it to look and work best for your application •Handmade in the U.S.A.
TANKS & OIL FILTERS DASHES & GAUGES
Cobra DS-380469
NOTE: All measurements are approximate. PART # DESCRIPTION SUG. RETAIL 4.5” WIDE FENDERS 1401-0001 Long O.C.F.; 21” wheels $229.95 4.75” WIDE FENDERS 1401-0283 Long O.C.F.; 19” wheels 229.95 1925-2757 Rambler; 19” wheels 229.95 1925-2753 Rambler; 21” wheels 229.95 DS-380278 Duster; 19”/21” wheels 229.95 DS-380279 Maverick; 19”/21” wheels 229.95 DS-380334 Gambler; 19/21” wheels 229.95 DS-380041 Outlaw; 19”/21” wheels 229.95 DS-380474 Stinger; 21” wheels 239.95 DS-380370 Longshot; 19” wheels 239.95 DS-380473 Longshot; 21” wheels 239.95 5.5” WIDE FENDER 1401-0148 Long O.C.F.; 21” wheels; 433/8” L x 133/4” radius 229.95
PART # DESCRIPTION SUG. RETAIL 5.5” WIDE FENDER (CONT) 1401-0244 Long O.C.F.; 21” wheels; $224.95 45” L x 141/4” radius DS-380489 Stubby; 3” x 21” wheels 239.95 DS-380490 Rambler; 3” x 21” wheels 239.95 DS-380491 Gambler; 3” x 21” wheels 239.95 6.25” WIDE FENDERS (16” WHEELS) 1401-0155 Long O.C.F. 229.95 1925-2754 Stubby 229.95 1925-2755 Rambler 229.95 DS-380276 Duster, 361/2” L 229.95 3 DS-380369 Stinger, 32 /4” L 239.95 DS-380372 Longshot, 361/2” L 239.95 6.25” WIDE FENDERS (18” WHEELS) 1401-0149 Stubby 229.95
PART # DESCRIPTION SUG. RETAIL 6.25” WIDE FENDERS (18” WHEELS) (CONT) 1401-0150 Rambler $229.95 1401-0151 Longshot 229.95 1401-0153 Stinger 229.95 1401-0154 Long O.C.F. 229.95 6.25” WIDE PREDRILLED FENDER FOR FXSTD 1925-0002 Cobra 229.95 1925-0003 Rambler 229.95 6.75” WIDE PREDRILLED FENDER FOR WIDE GLIDE DS-380469 Cobra; 21” wheels 228.95 1
Not for use with OEM frames; requires frames with at least 2” stretch.
All part numbers in BOLD MAGENTA are new for 2010.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
989
SECTION
17
WINDSHIELDS DS-393492
TOURING LUGGAGE
1925-6789
SEATS & SISSY BARS EXHAUST
DS-393493
FUEL/AIR SYSTEMS 1401-0191
ENGINE TRANSMISSION FRONT FENDERS & DRIVELINE •Raw stamped-steel-construction fender maintains a low-tire profile and comes complete with chrome mounts •Attach with OEM hardware
GASKETS & SEALS
PART # 1925-6789 DS-393492
DESCRIPTION For 00-07 FXSTD (repl. OEM #59876-00) For 84-10 FXST, 85-86 FXWG models; repl. OEM #59924-80A
SUG. RETAIL $59.95
PART # 1401-0191 DS-393493
DESCRIPTION For 93-06 FXSTS; repl. OEM #59176-96A For 88-92 FXSTS; repl. OEM #59176-88
SUG. RETAIL $64.95 40.95
47.95
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS
STEEL FRONT FENDER
XLX-STYLE FRONT FENDER
•No rivet, smooth sided steel construction •Designed to fit FLSTF front ends with 16” wheels •Will also fit FLT/FLHT models if used in conjunction with PART # DS-222128 or DS-222129 fender to fork adapters PART # 1401-0043
DESCRIPTION For 90-99 FLSTF models (exc. Springer)
•Steel construction with chromed side braces PART # DS-393482 SUG. RETAIL $122.95
DESCRIPTION For 85 FX, 84-94 FXR, 91-05 Dyna and 86-10 XL Narrow Glide front ends w/ 18” or 19” front tires
SUG. RETAIL
$47.95
DS-380038
DASHES & GAUGES DS-222940 FRAMES, SUSPENSION & FENDERS FOOTRESTS DS-380066 & LICENSE PLATE FRAMES TIRES, FRONT FENDER TUBES & •Original-style fender DS-380031 Chrome fender brackets must WHEELS NOTE: be ordered separately. QUICKBOB® STEEL FRONT FENDER DESCRIPTION SUG. RETAIL HARDWARE, PART # •Yesterday’s style and Drag Specialties quality steel CHEMICALS DS-380038 For 85 FX, 84-94, 99 FXR, 91-05 FXD and 86-10 XL models; construction combine to create a nostalgic look may be used on FXST and FXWG models by using fender & TOOLS PART # DESCRIPTION SUG. RETAIL mounting kit PART #DS-222940; repl. OEM # 59007-73B $61.95 DS-380066 61/2” Quickbob fender for 24.95 COVERS, DS-380031 Mount brackets for fender (pr.) 85-86 FXWG, 84-10 FXST and SECURITY DS-222940 Fender mounting kit for use on 84-10 FXST, 93-05 FXDWG $175.95 93-05 FXDWG and 85-86 FXWG 15.95 & GENERAL
990
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS
CLASSIC STRETCHED FRONT FENDER FOR 23S
•Designed by McKay’s Cycle Creations •High-strength composite glass construction is lighter and stronger than fiberglass •Perfectly straight sidewalls
•High quality pressure-formed front fender •Styled in the classic Bagger look with a 4” stretch on the rear for that slammed hot-rod look •Fenders are 3D molded and hand finished; requires no special mounting blocks or holes to be drilled before installation •Made in the U.S.A.
PART # 8638
PART # 1401-0295
CANADIAN FRONT FENDER
DESCRIPTION For Wide Glide front ends w/ 16” wheels
SUG. RETAIL $228.95
DESCRIPTION For 86-10 FLT/FLHT/FLHR/FLTR/FLHX w/ a 23” dia. front wheel
EXHAUST FUEL/AIR SYSTEMS SUG. RETAIL
ENGINE
$494.95
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1401-0254
THICKY STRETCHED FRONT FENDER FOR 23” WHEELS
LIGHTING
•High quality, pressure-formed front fender lets you run a 23” front wheel on your bagger •Fender has contemporary Pro Street style with a full tire-wrap hugging profile •Requires the use of fender spacer PART #s 1410-0039 or 1410-0040 for installation •Made in the U.S.A. PART # 1401-0296
DESCRIPTION For 86-10 FLT/FLHT/FLHR/FLTR/FLHX when using a 23” dia. front wheel
HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL $479.95
THICKY FRONT FENDERS •Premium 12-gauge steel construction, raw finish •Heavy sidewalls for full-tire coverage •Added surface area allows for more elaborate custom paint designs •Requires custom mounting and a fender mount spacer kit, sold separately •Made in the U.S.A. PART # 1401-0254 1401-0255
DESCRIPTION For 16”/18” wheels, 4.75” wide For 21” wheel, 4.75” wide
SUG. RETAIL $299.95 299.95
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
1401-0147 1401-0146
CUSTOM FRONT FENDER BLANKS DEI 21” FRONT FENDER •Radically-shaped fender is a great way to upgrade the look of your ride •12-gauge steel construction, raw finish •Designed to fit 21” tires •Measures approximately 4.75” wide •Requires custom mounting •Made in the U.S.A. PART # 1401-0253
DESCRIPTION DEI fender for 21” wheels
SUG. RETAIL $299.95
•Heavy-gauge steel construction •Sized large enough to cut out your own style •Comes undrilled so you can position it to look and work best for your application •Handmade in the U.S.A. NOTE: All measurements are approximate. PART # 1401-0146 1401-0147
All part numbers in BOLD MAGENTA are new for 2010.
DESCRIPTION 5.5” W 6.5” W
SUG. RETAIL $182.95 182.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
991
SECTION
17
WINDSHIELDS
1401-0209
TOURING 1401-0245
LUGGAGE 21” FRONT FENDERS
SEATS & SISSY BARS
•Composite and fiberglass construction •Lightweight yet durable •Fit tires with a 21” wheel •Made in the U.S.A.
EXHAUST
PART # FOR FLHT/FLHR 1401-0209 1401-0245
FUEL/AIR SYSTEMS
DESCRIPTION MODELS Fits 120/70 tire Fits 90/90 tire
SUG. RETAIL $222.95 214.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS “BIG WHEELER” FRONT FENDER CABLES BRAKES TANKS & OIL FILTERS
DS-380256
DS-380258
FRONTDRAGGER FENDERS
•Great style pre-drilled fiberglass fender dramatically improves the front end of your bike •A must when using the 21” x 3.50” wheel •Direct replacement fender for 00-10 FLT models PART # DESCRIPTION SUG. RETAIL 1401-0273 For 00-10 FLT models and 87-99 FLT models w/ 21” x 3.50” tire $224.95
•Very popular fiberglass fender design that matches the Taildragger fenders •Available for Wide Glide and narrow glide applications •Made in the U.S.A. NOTE: All fenders must be prefitted before painting. PART # DESCRIPTION FOR USE WITH 19” OR 21” FRONT WHEELS DS-380258 43/4” W, for most narrow glide applications FOR USE WITH 16”, 17” OR 18” FRONT WHEELS DS-380256 63/4” W, for most Wide Glide applications DS-380257 61/4” W, for FLST applications
SUG. RETAIL $161.95 224.95 224.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES LEGACY FRONT FENDER fender designed to match TIRES, •Dynamic Legacy rear fenders TUBES & •Measures 61/2” W WHEELS •Made in the U.S.A. WIDESPORT FRONT FENDER CAFE-STYLE FRONT FENDER NOTE: For use with stretched frames only. •Sleek, ABS plastic fender is cleaner looking •Created by Arlen Ness HARDWARE, NOTE: Fenders may vary up to 1/4” W. and lighter than the Fat Boy fender •Sleek design made of durable ABS plastic CHEMICALS •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL •Easy to install and ready for primer and paint & TOOLS •Made in the U.S.A. SUG. DS-380263 For use w/ any DESCRIPTION RETAIL PART # DESCRIPTION SUG. RETAIL PART # Wide Glide front COVERS, end using a 16”, 17” DS-380037 For Wide Glide using 16” DS-380048 For most narrow SECURITY or 18” wheel $239.95 or 18” front wheels $79.95 glide-type front ends $59.95 & GENERAL
992
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
WINDSHIELDS FAT ROD FRONT FENDER •Fiberglass construction •Bagger-style design •Matching rear fender, (PART #1401-0045) available separately •Made in the U.S.A. PART # 1401-0044
DESCRIPTION For 02-06 V-Rod
TOURING LUGGAGE SUG. RETAIL $299.95
SEATS & SISSY BARS EXHAUST 1925-8639
FUEL/AIR SYSTEMS ENGINE
DS-380091
DS-380090
TRANSMISSION & DRIVELINE GASKETS & SEALS
1401-0207
ELECTRICAL
DS-380475
1401-0015 1401-0130
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 8625
BRAKES
1401-0182 1401-0183
TANKS & OIL FILTERS
8614
DASHES & GAUGES FRONT FENDERS •Made from new space-age materials that are lighter and stronger than fiberglass •Not predrilled, allows custom positioning •Prime and paint with minimal prep •Made in the U.S.A.
1401-0208 1401-0131
PART # DESCRIPTION NARROW GLIDE 1925-8639 Dominator (51/4” W 18”/19”) 1401-0207 StreetSweeper (4.5” W 18”/19” wheels 100/90 tire) DS-380090 Skirted LoBoy (4.5” W 19” wheels 100/90 tire) DS-380091 Loboy® (4.5” W 19” wheels 100/90 tire) 1401-0130 Hugger (4.5” W 19” wheels 100/90 tire) WIDE GLIDE 1401-0015 Dominator (7” W 21” wheels 90/90 tire)
SUG. RETAIL $186.95 228.95 162.95 162.95 175.95 175.95
PART # WIDE GLIDE 1401-0016 DS-380475 1401-0183 1401-0182 8625 8614 1401-0131 1401-0208
DESCRIPTION (CONT) Dominator (7” W 21” wheels 120/70 tire) Loboy Sweeper (6.5” W 16” wheels) Loboy Sweeper FL w/ ears (6.5” W 16” wheels) Loboy® (6.5” W 16” wheels) StreetSweeper (6.5” W 16” wheels) Smooth Sport (6.5” W 16” wheels) Hugger (6.5” W 16” wheels) Hugger FL w/ ears (8.5” W 16”/18” wheels)
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $175.95 231.95 230.95 175.95 299.95 161.95 199.95 200.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
993
SECTION
17
WINDSHIELDS POLISHED FENDER ADAPTERS
TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
•Polished billet aluminum with blind hole design; hides all mounting hardware •Designed to mount any FXST/FLST (except Springer) front fender to an FLT- or FLHT-style front fork •Adapter measures 35/8” L x 15/8” H x 3/4” W PART # 1410-0002 •Made in the U.S.A.
FENDER-TO-FORK ADAPTER FOR 21” WHEEL •Chromed aluminum adapters allow custom front fender installation •Designed to work with RWD 51/2” wide undrilled fender for 3” x 21” wheels •1/4” diameter, 21/2” on-center blind hole fender mounts •5/16” diameter, 3” on-center fork leg mount holes •Measure 1.250” thick •Made in the U.S.A. PART # 1410-0021
DESCRIPTION For 84-10 FLT models
DESCRIPTION SUG. RETAIL Fender adapters (pr.) $108.95
SUG. RETAIL $92.95
DS-222128
1410-0025
1410-0026
ENGINE TRANSMISSION & DRIVELINE
FRONT FENDER ADAPTERS •CNC-machined billet aluminum construction •Relocates stock fender when converting to 21” front wheel •Available in chrome or black finish •3” on-center mounting holes •Hidden mounting design •.750” thick x 13.5 L x 5.25” H •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 86-10 FLT, FLHT, FLHR, FLTR AND CUSTOM TOURING MODELS 1410-0025 Chrome $399.95 1410-0026 Black 399.95
GASKETS & SEALS DS-222129
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS ADAPTERS & MIRRORS FENDER-TO-FORK •Adapt FLSTF front fender to any 84-10 FLT or FLHT style fork using CABLES BRAKES TANKS & OIL FILTERS
a 16” wheel •Work with FLSTF fender PART #1401-0043 •Can also be used in many custom applications •Adapters measure 311/16” L x 111/16” W, 3/4” thickness •Top holes are 5/16” with 23/4” centers, bottom holes are also 5/16” with 3” centers •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-222128 Chrome $74.95 DS-222129 Raw 64.95
994
1410-0019
BILLET FENDER ADAPTERS •Chrome billet spacers •PART #1410-0018 is used when adapting a narrow-glide fender to a 41mm wide-glide front fork; measures 1.125” thick, 2.75” on-center blind holes and 2.6” on-center mounting holes •PART #1410-0019 is used to adapt a Deuce front fender to a Wide Glide fork; measures .875” thick, 2.6” on-center horizontal holes and 2.75” on-center vertical holes •Mounting hardware included •Sold in pairs •Made in the U.S.A. by Custom Cycle Engineering PART # DESCRIPTION SUG. RETAIL 1410-0018 Narrow-glide fender to mid-glide front end $100.95 1410-0019 Deuce fender to Wide Glide front end 118.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1410-0039 FOOTRESTS & LICENSE PLATE FRAMES 1410-0040 FENDER SPACER KITS TIRES, •Billet aluminum construction TUBES & •Make installing fenders fast and easy WHEELS •Feature Domino styling on one side and smooth styling on the other for a choice of custom looks HARDWARE, •Spacers are 3.5” L x 1” W’; 3” on-center holes CHEMICALS •Sold in pairs in the U.S.A. & TOOLS •Made PART # DESCRIPTION COVERS, FOR 84-10 FLT, FLHT, FLHR, FLTR, FLHX Satin SECURITY 1410-0039 Black powdercoat & GENERAL 1410-0040
1410-0018
CHROME FRONT FENDER SPACER KIT
SUG. RETAIL $77.95 87.95
•For FXSTD models when using a Paul Yaffe Original front fender • Includes four spacers, two measuring 1” and two measuring 13/16” •Made in the U.S.A. PART # DESCRIPTION 1410-0013 For 00-07 FXSTD Deuce
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $99.95
SECTION
17
WINDSHIELDS TOURING
WFB BENCHMARK BAGGER FRONT FENDER BLOCKS 1410-0022
•Machined from billet aluminum and available in a chrome or raw finish •Less is more in this minimalist part that provides perfect spacing for your Road King, Road Glide, Street Glide or Ultra project •Besides being used with Klock Werks’ Benchmark Front Fenders, they can be used for a variety of custom applications •The spacers are 0.750” thick and hole spacing is 3” on center to fit FLT or FLHT style forks •Sold in pairs •Made in the U.S.A.
LUGGAGE SEATS & SISSY BARS
NOTE: Will not fit Perse front forks. PART # DESCRIPTION FOR 85-10 FLT, FLHT, FLHR, FLTR, FLHX MODELS 1410-0022 Chrome finish 1410-0023 Raw finish
SUG. RETAIL
EXHAUST
$79.95 69.95
FUEL/AIR SYSTEMS
1410-0027
ENGINE 1410-0028
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING 1410-0032
HANDLEBARS, CONTROLS & MIRRORS
1410-0031
CABLES BRAKES 1410-0045
TANKS & OIL FILTERS
TIRE HUGGER FRONT FENDER MOUNTING BLOCKS •Use with Klock Werks’ front fenders, or they can also be used for a variety of custom applications •Machined from billet aluminum and are available in a chrome or raw finish •FLT/FLHT spacers measure 5/8” tall by 35/8” long and have 3” on-center holes. Spacers for 21” tires are 1” wide; spacers for 16”/18” tires are 7/8” wide •FLST spacers measure 5/8” tall by 3” long and have 23/4” on-center holes. Spacers for 21” tires are 3/8” wide; spacers for 16”/18” tires are 1/8” wide •FXST/FXDWG spacers measure 5/8” tall by 3” long and have 23/4” on-center holes. Spacers for 21” tires are 1/2” wide; spacers for 16”/18” tires are 1/4” wide •FXST/FXDWG Skinny 21” fender spacers measure 5/8” tall by 3” long and have 23/4” on-center holes and are 11/4” wide •All are sold in pairs •Made in the U.S.A. NOTE: Will not fit Perse front forks. PART # DESCRIPTION FOR 83-10 FLT, FLHT, FLHR, FLTR, FLHX MODELS 1410-0029 16”/17”/18” chrome finish 1410-0030 16”/17”/18” raw finish 1410-0027 21” chrome finish 1410-0028 21” raw finish
SUG. RETAIL $79.95 69.95 79.95 69.95
PART # DESCRIPTION SUG. RETAIL FOR 84-10 FXST, 93-05 FXDWG MODELS (EXCEPT FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS 1410-0041 16”/18” chrome finish $79.95 1410-0042 16”/18” raw finish 69.95 1410-0043 21” chrome finish 79.95 1410-0044 21” raw finish 69.95
PART # DESCRIPTION FOR 86-10 FLST (EXCEPT SPRINGER) 1410-0033 16”/18” chrome finish 1410-0034 16”/18” raw finish 1410-0031 21” chrome finish 1410-0032 21” raw finish
SUG. RETAIL $79.95 69.95 79.95 69.95
PART # DESCRIPTION SUG. RETAIL SKINNY FOR 84-10 FXST, 93-05 FXDWG MODELS (EXCEPT FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS WITH UP TO 100/100 SERIES TIRES (NARROW STYLE) 1410-0045 21” chrome finish $79.95 1410-0046 21” raw finish 69.95
All part numbers in BOLD MAGENTA are new for 2010.
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
995
SECTION
17 1410-0016
WINDSHIELDS
FRONT FENDER SPACERS •Billet front fender spacers with brilliant chrome finish •Spacers accept 5/16” bolts and have 23/4” on-center holes •Sold in pairs •Made in the U.S.A.
TOURING 1410-0014
LUGGAGE
PART # 1410-0014 1410-0015
DESCRIPTION 11/4” W x 4” L x 3/8” T 11/4” W x 4” L x 1/4” T
SUG. RETAIL $61.95 55.95
PART # 1410-0016 1410-0017
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
DESCRIPTION W x 31/2” L x 1” T 3/4” W x 31/2” L x 3/4” T 3/4”
SUG. RETAIL $61.95 55.95
1410-0036
ELITE CHROME FENDER SPACERS
CHROME FENDER SPACERS 2406-4145
•Billet fender spacers allow the mounting of a narrow glide fender to a Wide Glide front end (except FLT/FLHT) •Spacers accept 5/16” bolts •Have 2.750” on-center holes •Sold in pairs; made in the U.S.A. PART # 2406-4143 2406-4145
DESCRIPTION 41mm Wide Glide (1.00”) 41mm Wide Glide (1.25”)
SUG. RETAIL $107.95 107.95
•Billet fender spacers for mounting a Wide Glide front fenders •Spacers accept 5/16” bolts with 3” on-center holes •1.25” spacers can be used with custom 21” fenders •Sold in pairs •Made in the U.S.A. PART # FOR 84-10 FLT/FLHT 1410-0036 1410-0037 1410-0038
DESCRIPTION Elite (.6875”) Elite (1.25”) Smooth (1.25”)
SUG. RETAIL $107.95 107.95 73.95
GASKETS & SEALS ECONOMY
SLOTTED FRONT FENDER SPACERS
ELECTRICAL FENDER
SPACERS
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
•Billet 1” fender spacers allow the mounting of a narrow glide fender to a Mid Glide or Wide Glide 41mm front end (except FLT/FLHT) •Accept 5/16” bolts with 23/4” on-center holes •Sold in pairs; made in the U.S.A. PART # 1410-0012
DESCRIPTION Economy fender spacer
SUG. RETAIL $71.95
•Chrome-plated, CNC-machined T-6 aluminum •Allow easy adapting of fender to forks •Spacers accept 5/16” bolts and have 23/4” on-center holes •Made in the U.S.A. •Sold in pairs PART # DESCRIPTION 7805-7807 For 41mm Wide-Glide (except FLT/FLHT); 1.250”
SUG. RETAIL $72.95
CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
FRONT FENDER BRACKETS •Brackets with rivets; sold in pairs PART #
DESCRIPTION
SUG. RETAIL
FRAMES, DS-380031 For mounting original-style fenders on 85 FX; also fits 84-94, 99 FXR, 86-10 XL and 91-05 FXD models $24.95 SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES FENDER TIRES, MOUNT KIT TUBES & FRONT •Everything needed to mount a stock WHEELS FENDER RIVETS FX-, FXE- or XL-style 1/4” x 5/16” •Heavy-duty HARDWARE, stainless steel rivets front fender onto 83 FX models after the CHEMICALS •Sold in packs of 25 front end has been converted to Wide Glide-style & TOOLS PART # DESCRIPTION SUG. RETAIL •Designed for use with our Wide Glide style conversion kits DS-222916 •Spacers measure 11/2” L x 3/4” diameter with 5/16” hole COVERS, DS-380034 For our FX- and XL-style front fender, PART # DESCRIPTION SUG. RETAIL PART #s DS-380038; repl. stock rivets on SECURITY 85 FX 84-94 FXRS and FXRT models $16.95 DS-222940 For Wide Glide-style front ends $15.95 & GENERAL
996
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
WINDSHIELDS TOURING 2030-0231
REAR FENDERS FOR SOFTAILS
LUGGAGE
•Available in either 4” stretch for dramatic styling or stock length for the rider who wants to clean up the back of the bike •Predrilled to match stock mounting locations and stamped in 14-gauge US steel •Finished with an E-coating to prevent rust and corrosion •Available with or without a frenched license plate pocket •Made in the U.S.A.
1401-0246
SEATS & SISSY BARS EXHAUST
NOTE: The 4” stretch is predrilled to accept FLSTC-style taillights and turn signals. PART # DESCRIPTION FOR 00-05 FXST/00-10 FLST (EXCEPT FXSTD, 07-10 FLSTF, 08-10 FLSTSB) (7.125” WIDE) 1401-0246 4” stretch; frenched plate pocket 1401-0248 4” stretch; smooth 1401-0250 4” stretch; stocker 1401-0247 stock length; frenched plate pocket
SUG. RETAIL
$429.95 389.95 429.95 429.95
PART # DESCRIPTION FOR 00-05 FXST/00-10 FLST (EXCEPT FXSTD, 07-10 FLSTF, 08-10 FLSTSB) (7.125” WIDE) (CONT) 1401-0249 stock length; smooth 2030-0229 License frame, chrome lighted 2030-0230 License frame, chrome 2030-0231 License frame, raw
SUG. RETAIL
$389.95 199.95 59.95 99.95
1401-0251
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
BUILDERS SERIES 4” STRETCHED REAR FENDERS •These fenders are the exact same quality and dimensions as Klock Werks standard fender but without the mounting holes •Result yields a smooth finish while minimizing work needed for bodywork •Stamped with 14-gauge US steel and E-Coated to prevent rust and corrosion •Available with or without frenched license plate pocket PART # DESCRIPTION SUG. RETAIL FOR 00-05 FXST/00-10 FLST (EXCEPT FXSTD, 07-10 FLSTF, 08-10 FLSTSB) (7.125” WIDE) 1401-0251 4” stretch; frenched plate pocket $429.95 1401-0252 4” stretch; smooth 389.95 2030-0229 License frame, chrome lighted 199.95 2030-0230 License frame, chrome 59.95 2030-0231 License frame, raw 99.95
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
1401-0238 1401-0279 1401-0239
STRETCHED BENCHMARK REAR FENDERS •Fender is available in either 4” stretch for dynamic styling or 2” stretch for the rider who simply wants to clean up the back of their bike •Predrilled to match stock mounting locations and stamped with 14-gauge steel •Finished with an E-coating to prevent rust and corrosion 1401-0278 •All are available with or without frenched license plate pocket; 4” stretch also available with horizontal or vertical light cutout PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL FOR 09-10 FLHT, FLHX, FLHR, FLTR MODELS (8.625” WIDE) FOR 97-08 FLT, FLHT, FLHX, FLHR, FLTR MODELS (7.125” WIDE) 1401-0277 4” stretch w/ frenched plate pocket $429.95 1401-0238 2” stretch w/ frenched plate pocket $449.95 1401-0278 4” stretch w/ frenched plate pocket and 1401-0239 2” stretch smooth 399.95 horizontal taillight cutout 469.95 LICENSE PLATE FRAMES 1401-0279 4” stretch w/ frenched plate pocket and 2030-0229 Chrome lighted 199.95 vertical taillight cutout 469.95 2030-0230 Chrome 59.95 1401-0274 4” stretch smooth 409.95 2030-0231 Raw 99.95 1401-0275 4” stretch smooth w/ horizontal taillight cutout 449.95 1401-0276 4” stretch smooth w/ vertical taillight cutout 449.95
All part numbers in BOLD MAGENTA are new for 2010.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
997
SECTION
17
WINDSHIELDS
1401-0193
TOURING
1401-0193
LUGGAGE SEATS & SISSY BARS 2030-0229
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
2030-0231
WFB™ BENCHMARK 6” STRETCHED REAR FENDERS •Stamped from 14-gauge U.S. steel, these fenders are E-coated to prevent rust and corrosion •Deep-draw stamping technology ensures a consistent flawless finish while minimizing body work •Standard rear fenders for 97-08 touring models are 6” longer than a stock rear touring fender and are a direct replacement •Fenders for Rolling Thunder, Daytec, and Chopper Guys 200 tire Bagger frames can also be used in custom applications 1401-0201 •Fenders for touring models mount in the stock location using all stock mounting hardware; all mounting holes are located and laser pre-cut to simplify the installation process •License frames will perfectly fit stretched fenders listed or can be used in custom applications, include mounting hardware and accept most 4” x 7” license plates. •All fenders and frames are made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR 97-08 FLT, FLHT, FLHX, FLHR, FLTR MODELS FOR ROLLING THUNDER, DAYTEC, AND CHOPPER (7.125” WIDE) GUYS 200 TIRE BAGGER FRAMES (8.625” WIDE) 1401-0192 Fender, smooth style $389.95 1401-0201 Fender, smooth style $389.95 1401-0193 Fender, frenched style 429.95 1401-0202 Fender frenched style 429.95 2030-0229 License frame, chrome lighted 199.95 2030-0246 License frame, chrome lighted 199.95 2030-0231 License frame, chrome 99.95 2030-0248 License frame, chrome 99.95 2030-0230 License frame, raw 59.95 2030-0247 License frame, raw 59.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
1401-0198
1401-0291 1401-0178
BRAKES
TRACKER REAR FENDER CONVERSION KITS
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION VINTAGE REAR FENDER CONVERSION KITS & FENDERS •Fender inspired by the Softail conversion Roland Sands Design created and dubbed El Borracho •Designed to be used on OEM frames over any rear wide swingarm kit FOOTRESTS •Kits include chrome billet fender struts and steel fender & LICENSE •200mm fender measures approximately 9” W fender measures approximately 10.5” W PLATE FRAMES •240mm •Matching seat kit, gas tank kit and handlebars sold separately mounting hardware included TIRES, •All •Made in the U.S.A. TUBES & NOTE: Requires the fender supports to be cut off of 90-07 stock chassis. WHEELS PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL FOR 90-07 SOFTAIL W/ 200MM REAR TIRE (CONT) HARDWARE, FOR 08-10 FXST/FLST W/ 200MM REAR TIRE Fender kit $899.95 1411-0014 Fender struts only $828.95 CHEMICALS 1401-0271 Fender only 231.95 FOR 90-07 SOFTAIL W/ 240MM REAR TIRE & TOOLS 1401-0200 1411-0028 Fender struts only 828.95 1401-0178 Fender kit 799.95 COVERS, FOR 90-07 SOFTAIL W/ 200MM REAR TIRE 1401-0199 Fender only 238.95 Fender kit 899.95 1411-0013 Fender struts only 659.95 SECURITY 1401-0198 Fender only 231.95 & GENERAL 1401-0200
998
•Designed to be used on OEM frames over any rear wide swingarm kit •9” W fender is constructed from 1018 steel and is available in raw finish only •Struts are made from 3/8î thick 1018 steel and available in chrome or black powdercoat finish •Available with RSD 200mm rear fender or struts available separately for use with many other custom fenders •All necessary hardware included •Made in the U.S.A. NOTE: Requires the fender supports to be cut off 99-07 stock chassis. SUG. PART # DESCRIPTION RETAIL FOR 08-10 FXST/FLST W/ 200MM REAR TIRE 1401-0291 Fender kit with chrome struts $599.95 1401-0292 Fender kit with black struts 599.95 1411-0031 Chrome fender struts only 399.95 1411-0032 Black fender struts only 399.95 FOR 90-07 SOFTAIL W/ 200MM REAR TIRE 1401-0289 Fender kit with chrome struts 599.95 1401-0290 Fender kit with black struts 599.95 1411-0029 Chrome fender struts only 399.95 1411-0030 Black fender struts only 399.95
All part numbers in BOLD MAGENTA are new for 2010.
SECTION
17
WINDSHIELDS Racer
Cruiser
Duster
TOURING LUGGAGE SEATS & SISSY BARS EXHAUST
Maverick
Gambler
Longshot
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
Midway Pro Street
ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
2000R
BRAKES 9000R Left side
TANKS & OIL FILTERS
CUSTOM REAR FENDERS •Heavy-gauge steel construction; available in seven popular widths •Swingarm fender features wiring tubes •Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork •Fenders come undrilled so you can position them to look and work best for your application •Handmade in the U.S.A. STYLE 7.25” WIDE 8.5” WIDE 9” WIDE 10.5” WIDE 11” WIDE FOR SWINGARM FRAMES Racer DS-380620 Cruiser 1401-0242 DS-3804681 DS-3804671 DS-380619 Duster DS-380327 DS-380323 Maverick DS-380328 Gambler DS-380332 DS-380331 DS-380330 7807-00801 DS-3806152 Longshot DS-380357 DS-380358 DS-380359 DS-3806182 Midway DS-380470 Pro Street 1401-0003 1401-0004 FOR RIGID FRAMES 2000R (left-side drive) DS-380309 2000R-RSD (right-side drive) 9000R (left-side drive) DS-380624 DS-380625 DS-380621 1 2
SUG. RETAIL $394.95. SUG. RETAIL $359.95.
All part numbers in BOLD MAGENTA are new for 2010.
DASHES & GAUGES
13” WIDE
LENGTH
-
303/4”
SUG. RETAIL
431/2” 451/4” 341/4” 34” 421/2” 375/8” 31”
$393.95 393.95 314.95 299.95 314.95 314.95 324.95 338.95
1401-0110 -
371/2” 371/2” 371/2”
349.95 384.95 349.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
999
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS
CUSTOM STRUTLESS PRO-STREET REAR FENDERS •Internal strut design eliminates external struts •Heavy-gauge steel construction ensures strength, straightness and a flawless finish •Inspected personally by a master fender builder •Available without taillight •For custom applications only (not recommended for OEM frames) •Made in the U.S.A. PART # DESCRIPTION NOTE: Requires welding a mounting plate FOR CUSTOM APPLICATIONS (included) to the frame before installing DS-380486 9” wide the fender.
DS-380486
DS-380487
SUG. RETAIL $589.95
PART # DESCRIPTION SUG. RETAIL FOR CUSTOM APPLICATIONS (CONT) DS-380487 11” wide $589.95
EXHAUST 1401-0163
1401-0134
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS
1401-0136
STRUTLESS REAR FENDERS •Internal strut design eliminates external struts •Heavy-gauge steel construction, 9” wide, ensures strength and a flawless finish •Available with or without taillight •Requires the removal of stock framehorns •Made in the U.S.A. NOTE: Fenders have cut-out for electrical box. PART # DESCRIPTION FOR 00-05 FXST/FLST 1401-0163 Longshot 1401-0134 Pro Street 1401-0136 Pro Street w/taillight and license plate kit
SUG. RETAIL $614.95 594.95 954.95
PART # DESCRIPTION FOR 86-99 FXST/FLST 1401-0135 Pro Street
SUG. RETAIL $594.95
1401-0176
CABLES 1401-0285
BRAKES TANKS & OIL FILTERS OEM-STYLE REAR FENDERS
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1000
1401-0177
•Heavy-gauge steel construction 1401-0240 •Predrilled; no spacers required •Softail fenders available in standard and Long styles; feature flat mounting surface for the electronic panel; also available with RWD LED Cat Eye/License Plate/Turn Signal Kit recessed into fender •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR 06-10 FXST MODELS (WITH 200 TIRE) FOR 06-10 FXST MODELS (WITH 200 TIRE) (CONT) 1401-0176 91/2” W fender only $338.95 1401-0286 91/2” W Long fender w/ taillight and license plate kit $649.95 1401-0285 91/2” W Long fender only 338.95 FOR 97-08 FLT, FLHT, FLHR, FLTR MODELS (WITH 180 TIRE) 1401-0177 91/2” W fender w/ taillight and license plate kit 649.95 1401-0240 81/4” W fender only 409.95
DS-380032
DS-270120
CUSTOM QUICKBOB® REAR FENDER •Wide Glide-style with a raw steel finish •Accepts stock fender struts and hardware •Optional chrome license/taillight bracket, sold separately PART # DESCRIPTION FOR 85 FX (EXCEPT FXWG, FXST AND FXR) DS-380032 Quickbob fender DS-270120 Chrome taillight/ license plate bracket only
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $99.95 45.95
SECTION
17
WINDSHIELDS TOURING
DS-393496
LUGGAGE SEATS & SISSY BARS DS-393497
FAT BOB-STYLE REAR FENDERS
EXHAUST
•Universal custom fenders with left-hand or right-hand chain cutaway •Each measures 38” L x 7” W x 51/2” D and has a raw steel finish PART # DS-393496 DS-393497
DESCRIPTION For left-hand chain For right-hand chain
SUG. RETAIL $81.95 81.95
FUEL/AIR SYSTEMS REAR FENDER •Uses stock mounts and has a raw steel finish •Original-style fender with taillight mounting holes PART # DS-380043
DESCRIPTION For 85 FX models (except FXWG, FXR and FXST)
ENGINE
SUG. RETAIL
$82.95
TRANSMISSION & DRIVELINE GASKETS & SEALS
DS-380067 DS-380058
ELECTRICAL REAR FENDERS •Steel construction •Available in a smooth style with no taillight mount/ license plate mount holes or a stock style with taillight/license plate mount holes •Fender-mounting holes are drilled for easy installation •Also fits FXST models if a full fender is desired PART # FOR 86-97 FLST/FLSTC DS-380058 DS-380067
LIGHTING REAR FENDER
DESCRIPTION MODELS Stock-style fender; repl. OEM #59144-87A Smooth-style fender
SUG. RETAIL $129.95 129.95
•An exact steel replacement for the fender found on 90-95 FLSTF models PART # DS-380068
DSECRIPTION For 90-95 FLSTF; repl. OEM #59596-89
SUG. RETAIL $122.95
HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS
REAR FENDER
REAR FENDER
•Steel construction •Pre-drilled for easy installation and accepts the OEM taillight assembly or Drag Specialties taillight assembly PART #DS-272026 •Direct replacement for stock rear fender •Measures approximately 71/4” wide
•Raw, stamped-steel construction •Pre-drilled for easy installation and accepts all the OEM components and taillight assembly •Direct replacement for stock rear fender •Measures approximately 9-1/2” wide
PART # DS-380064
DESCRIPTION For 84-96 FXST models; repl. OEM #59914-86A
SUG. RETAIL $92.95
PART # 1401-0256
DESCRIPTION For 06-10 FXST, FXSTB, FXSTS, FXSTC, FLSTSB; repl. OEM #59914-06
REAR FENDER •Raw steel finish •Includes fender support and two wire retention brackets PART # DESCRIPTION 1401-0272 For 04-10 XL; repl. OEM #59847-04, 59673-04
SUG. RETAIL $135.95
All part numbers in BOLD MAGENTA are new for 2010.
DASHES & GAUGES
SUG. RETAIL $189.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1001
SECTION
17
WINDSHIELDS
1401-0041 1401-0042
TOURING LUGGAGE SEATS & FAT BOB REAR FENDER steel finish, approx. 6” wide SISSY BARS •Raw on the inside EXHAUST FUEL/AIR SYSTEMS
6” FLAT REAR FENDER
•Available pre-drilled for OEM fender struts or undrilled for custom applications •Includes taillight/license mount PART # DESCRIPTION 1401-0041 OEM pre-drilled for 94-03 XL models 1401-0042 Custom undrilled for 94-03 XL models
•16-gauge, deep-drawn steel with a raw finish •Each is 41” L x 11/4” D •Fender bracket not included SUG. RETAIL $149.95 149.95
PART # DS-393500
DESCRIPTION 6” flat rear fender, bobbed
SUG. RETAIL $59.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL DS-380125
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
STEEL FLAT FENDERS
FAT ROD REAR FENDER
•Heavy 16-gauge steel construction, 42” long •Available in 71/2”, 81/2”, 9” and 10” widths •Made in the U.S.A. PART # DS-380125 DS-380126 DS-380128 1925-2610
DESCRIPTION 7 1/2” wide 8 1/2” wide 9” wide 10” wide
SUG. RETAIL $60.95 60.95 60.95 60.95
•Fiberglass construction •Features a recess for Cycle Visions’ Eliminator taillight assembly (PART #2010-0007), not included •Matching front fender (PART #1401-0044), available separately •Made in the U.S.A. PART # 1401-0045
DESCRIPTION For 02-06 VRSCA/B/D
DS-380250
SUG. RETAIL $359.95
DS-380252
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE LEGACY™ PLATE FRAMES REAR FENDER •Dynamic fiberglass fender from TIRES, Arlen Ness TUBES & •Measures approximately TRIMMED TAILDRAGGER™ REAR FENDERS 4” longer than the stock FLSTC WHEELS •One of the most popular and recognized fiberglass fenders of the ‘90s fender at the rear and has •Available in two different widths for custom applications HARDWARE, longer skirting for a dressy look •Made in the U.S.A. match to the Legacy™ front fender CHEMICALS •Perfect PART #DS-380263 NOTE: Fenders may vary up to 1/4” in width. & TOOLS •Made in the U.S.A. PART # DESCRIPTION DS-380250 For FXR and Softail, 7” W COVERS, NOTE: Fenders may vary up to 1/4” in width. DESCRIPTION SUG. RETAIL DS-380251 For custom applications, 8” W SECURITY PART # $239.95 DS-380252 71/2” W For custom applications, 81/2” W & GENERAL DS-380261
1002
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $224.95 224.95 224.95
SECTION
17
WINDSHIELDS CHUPA FRENCHED SMOOTH REAR FENDER KIT
TOURING
•Transform the look of your bike with this complete kit •Requires no modifications to install, truly a bolt-on one piece custom fender •8” stretch fender is made from highpressure composite and hand-finished •Steel plate formed into each fender for custom seat mounting •Wedgy Bag lights are frenched in to each filler panel; lights have run/brake/turn functions •License plate is frenched in and lit with a hidden LED light •Complete kit includes 8” stretched fender, two Wedgy lights and chrome stealth license plate frame with LED license light •Made in the U.S.A. PART # 1401-0293
CHUPA SMOOTH REAR FENDER
DESCRIPTION For 09-10 FLHT/FLHR/FLTR/FLHX
SUG. RETAIL $1,374.95
LUGGAGE
•A true bolt-on custom fender; requires no modifications to install •8” stretch rear fender features 3D side wall filler panels for a wild look •Fender is made from highpressure composite and finished by hand •Steel plate formed into fender for custom seat mounting •Made in the U.S.A. PART # DESCRIPTION 1401-0294 For 09-10 FLHT/FLHR/FLTR/FLHX
SEATS & SISSY BARS EXHAUST
SUG. RETAIL $714.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
DS-380479 8620
GASKETS & SEALS
UNIVERSAL REAR FENDERS •Made from space-age materials that are lighter and stronger than fiberglass •Not pre-drilled — you can position them wherever you want •Glassed-in convoluted tubing makes it simple and easy to wire the taillight •Ready for primer and paint with minimal preparation •Made in the U.S.A. PART # DS-380479 DS-380482 DS-380476
DESCRIPTION 71/4” Loboy 9” Loboy 71/4” Loboy StreetSweeper
DS-380476
ELECTRICAL SUG. RETAIL $228.95 242.95 283.95
PART # DS-380478 8620
DESCRIPTION 9” Loboy StreetSweeper 71/4” StreetSweeper
1401-0179
SUG. RETAIL $321.95 387.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
1401-0018
1401-0023
CABLES
1401-0020
BRAKES 1401-0022
TANKS & OIL FILTERS DASHES & GAUGES DS-380481
MODEL-SPECIFIC CUSTOM REAR FENDERS •Made from space-age materials that are lighter and stronger than fiberglass •Not predrilled — you can position them wherever you want •Glassed-in convoluted tubing makes it simple and easy to wire the taillight •Ready for primer and paint with minimal preparation •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 97-05 FLT MODELS 1401-0179 71/4” Loboy Sweeper $285.95 FOR 00-05 FXST AND 00-09 FLST MODELS (EXCEPT FXSTD, 07-09 FLSTF) 1401-0022 71/4” Loboy Sweeper w/ ECM cutout 285.95 1401-0020 71/4” Loboy Classic w/ ECM cutout 232.95 1401-0018 71/4” StreetSweeper w/ ECM cutout 354.95 1401-0023 71/4” Dominator w/ ECM cutout 193.95
DS-380480
PART # DESCRIPTION FOR 91-01 DYNA MODELS DS-380480 63/4” Loboy FOR 94-03 XL MODELS DS-380481 63/4” Loboy
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $234.95 228.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1003
SECTION
17
WINDSHIELDS TOURING
1401-0142
1401-0141 1401-0140
LUGGAGE SEATS & SISSY BARS CUSTOM REAR FENDER BLANKS EXHAUST
•Heavy-gauge steel construction •Available in three widths •Large enough to cut out custom style •Handmade in the U.S.A.
FUEL/AIR SYSTEMS
PART # DESCRIPTION FOR SWINGARM FRAMES 1401-0140 9” wide 1401-0141 11” wide
1401-0143
SUG. RETAIL $269.95 269.95
1401-0144
SUG. RETAIL
PART # DESCRIPTION FOR SWINGARM FRAMES (CONT) 1401-0142 13” wide; 143/4” radius 1401-0241 13” wide; 16” radius
$339.95 319.95
SUG. RETAIL
PART # DESCRIPTION FOR RIGID FRAMES 1401-0143 11” wide 1401-0144 13” wide
$294.95 339.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
POLISHED ALUMINUM SWINGARM ROCK GUARDS •Available in three widths: 5”, 63/16” and 93/8” •Measure 12” long •Fit most aftermarket Softail-style swingarm frames •Made in the U.S.A.
REAR FENDER ROCK GUARD •Made from high-quality stainless steel •Available in a polished finish •Made in the U.S.A. PART # DS-240093
LIGHTING
DESCRIPTION For 84-99 FXST/ FLST models
SUG. RETAIL $33.95
PART # 1925-2611 1925-2612
HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION 5” x 12” 63/16” x 12”
1925-2612
1925-2611 SUG. RETAIL $52.95 66.95
1925-2613 PART # 1925-2613
DESCRIPTION 93/8” x 12”
SUG. RETAIL $77.95
DS-264049 DS-264052
1411-0024
CABLES BRAKES
DS-264072 1925-6989
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1004
1411-0020 DS-264071
REPLACEMENT REAR FENDER STRUTS •Beautifully chromed or raw finish rear fender struts; available in a smooth or stock replacement style; sold in pairs STOCK-STYLE FENDER STRUTS PART # DESCRIPTION CHROME 1411-0017 For 00-07 FLSTC/S, 07 FLSTN; repl. OEM #S 59954-03, 59955-03 1411-0024 For 06-07 FXST (except FXSTD) 1411-0016 For 00-05 FXST (except FXSTD), 05-06 FLSTN, 00-06 FLSTF; repl. OEM #s 59964-03, 59969-03 DS-264049 4-hole for 86-99 FXST/FLST w/o turn signals mounted to fender struts; repl. OEM #s 59964-86, 59969-86 1411-0019 For 85-86 FXWG; repl. OEM #59961-80, 59960-80 DS-264052 For 85 FX; repl. OEM #59928-73, 59686-78 1411-0020 For 04-10 XL 1925-6989 For 94-03 XL; repl. OEM #59896-94, 59897-94 DS-264072 For 86-89 XL; repl. OEM #59950-81 RAW 1411-0021 For 00-05 FXST (except FXSTD), 05-06 FLSTN, 00-06 FLSTF; repl. OEM #s 59964-03, 59969-03 1411-0022 For 00-07 FLSTC/S, 07 FLSTN; repl. OEM #S 59954-03, 59955-03 1411-0026 For 06-07 FXST (except FXSTD); repl. OEM #60143-06A, 60146-06A
1411-0025 DS-264057
SUG. RETAIL $114.95 124.95
DS-264055
114.95 114.95 79.95 79.95 79.95 56.95 79.95
99.95 99.95 99.95
SMOOTH CUSTOM FENDER STRUTS PART # DESCRIPTION CHROME 1411-0025 For 06-07 FXST (except FXSTD) 1411-0018 For 00-05 FXST/FLST DS-264071 For 86-99 FXST/FLST DS-264057 For 85-86 FXWG DS-264055 For 85 FX RAW 1411-0027 For 06-07 FXST (except FXSTD) 1411-0023 For 00-05 FXST/FLST
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $124.95 114.95 109.95 79.95 79.95 99.95 99.95
SECTION
17
DS-264006
WINDSHIELDS
CURVED BILLET FENDER STRUTS
STEEL FENDER STRUTS
•For Chopper Guys FXST/FLST-style frames without OEM-style strut mounts •5/8” solid raw steel; studs and nuts included •Made in the U.S.A.
•Designed for custom Softail frames without OEM-style strut mounts •Made from 1/2” thick cold-rolled raw steel with 17/8” offset •Supplied with bushings for either 3/8” or 1/2” mounting holes •Available in stock height or 2” lower height •Made in the U.S.A.
PART # DESCRIPTION DS-264003 Fat Guy curved billet struts for 81/2” - 9” fenders
SUG. RETAIL $379.95
TOURING DS-264007
LUGGAGE
NOTE: 2” lower fender rails may change seat-to-fender contour. PART # DESCRIPTION SUG. RETAIL FOR 81/2” - 9” FENDERS DS-264006 Lowered (2”) fender struts $379.95 DS-264007 Stock-style fender struts 379.95
REAR FENDER STRUTS •Made from billet aluminum with a machine finish •For stock or custom FXR frames PART # DESCRIPTION SUG. RETAIL •Sold in pairs 1411-0033 For 87-94, 99-00 FXR models $399.95 •Made in the U.S.A.
RIGID FENDER SUPPORTS
DS-111205
•For Chopper Guys 250mm Rigid frames and other custom applications •Bolt-on style with fender mounting holes •Made in the U.S.A. PART # DS-111205 1411-0015
PART # DS-190935
PART # DS-189800
DESCRIPTION Button-head fender rail kit
GASKETS & SEALS ELECTRICAL LIGHTING
DESCRIPTION For 84-99 FXST models
SUG. RETAIL $65.95
SUG. RETAIL $16.95
•Comes complete with chrome bolts, nuts and acorns
HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION For 85 FX
SUG. RETAIL $18.95
BRAKES
SUPERSPORT REAR FENDER KIT •The simplest way to rid your bike of the bulky rear fender assembly •Bolt-on installation •Kits utilize stock turn signals •Manufactured from lightweight 5052 aluminum plate that is precisely bent to exacting tolerances •Up to 1 lb. lighter than stock •Give your machine that “tail-high” style of a true AMA Supersport racebike PART # DESCRIPTION •Satin black powdercoat 2030-0360 For 08-10 finish for lasting beauty Buell 1125R •Made in the U.S.A.
TANKS & OIL FILTERS DASHES & GAUGES SUG. RETAIL
1405-0117
CHROME LOWER FRONT FENDER TRIM
FRONT FENDER SKIRTS •Steel construction, polished and chrome plated •Available in plain chrome or flame style
•Perfectly matches the contour of the OEM front fenders •Highly polished and chrome plated •Includes mounting hardware PART # DS-380094
TRANSMISSION & DRIVELINE
CABLES
FENDER RAIL MOUNTING KIT PART # DS-190890
•Triangulated and attaches to frame with bung for additional strength •Features a built-in belt guard •Designed for custom rigid frames with 130-240mm tires PART # DESCRIPTION SUG. RETAIL •Sold in pairs 1413-0010 Rigid fender struts $124.95 •Made in the U.S.A.
•Pasties kit for mounting fender to struts •Includes chrome socket head bolts, special nuts, flat washers, wrench and Pasties, 6061 billet aluminum chrome covers •Made in the U.S.A. by Custom Cycle Engineering
BUTTON-HEAD FENDER RAIL BOLT KIT •Used for mounting fender rails to Chopper Guys Softail-style frames •Kit includes six 1/2”-13 x 1” button-head bolts and six A/N washers •Made in the U.S.A.
ENGINE
CUSTOM FENDER STRUT MOUNTING KIT
DESCRIPTION SUG. RETAIL Rigid fender supports (pr.) $122.95 Bones Rigid fender struts (pr.) 132.95
EXHAUST FUEL/AIR SYSTEMS
DUAL SUPPORT RIGID FENDER STRUTS
1411-0015
SEATS & SISSY BARS
DESCRIPTION For 87-10 FLT and FLHT; repl. the satin-finished aluminum OEM trim #s 59233-76, 59231-86
SUG. RETAIL $24.95
PART # DESCRIPTION SUG. RETAIL FOR 84-10 FLT, FLHT 1405-0117 Chrome $39.95 1405-0118 Flame $42.95
All part numbers in BOLD MAGENTA are new for 2010.
1405-0118
$68.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1005
SECTION
17
WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS
1405-0103
1405-0104
FENDER TIP ACCENTS •Chrome complement to the clean fender look on the Touring models •Quick, simple installation with double-sided adhesive •Sold each
1405-0102
INNER FENDER ACCENT
NOTE: Not for use on models with existing fender trim. PART # DESCRIPTION SUG. RETAIL FOR FLHR, FLHX, FLTR, FLHRSE AND FLHTCUSE (EXCEPT 07 FLHRSE) 1405-0103 Rear fender accent (except 09-10 models) $32.95 1405-0104 Front fender accent (leading edge) 32.95
EXHAUST
1405-0101
1405-0094
1412-0001
1412-0004
•Stamped steel insert is chrome-plated •Covers up the plain black inner fender/splash guard •Installs easily with double-sided adhesive •Sold each or in pairs depending on application, see chart PART # DESCRIPTION 1405-0094 For 00-05 FXST, 00-06 FLST (except 04 FXSTDSE, FLSTFSE) (pr.) 1405-0101 For 07 FXSTD, FLSTN, FLSTC, FXSTS (ea.) 1405-0102 For 08-10 FXST/FLST models
SUG. RETAIL $104.95 59.95 119.95
FUEL/AIR SYSTEMS FENDER TIPS
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
•Great way to cover dinged fender ends •Easy installation: requires no drilling or tools •Fit most OEM fenders
WILD BOAR FENDER ORNAMENT
NOTE: Tip for narrow tire fender will not fit “full coverage” or skirted fenders. PART # DESCRIPTION SUG. RETAIL 1412-0001 Narrow tire front fender (leading edge) $29.95 1412-0002 FLSTF front fender (leading edge) 29.95 1412-0003 FLSTF front fender (trailing edge) 29.95 1412-0004 FLSTF rear fender 29.95
DS-287553
DS-287556
DS-287552
DS-287555
•Make a real statement with this fender ornament •Features illuminating red eyes •Two-piece construction allows easy installation and bulb replacement •Requires 12V power source •Fits most any fender PART # DESCRIPTION SUG. RETAIL DS-111220 Wild boar fender ornament $49.95
ELECTRICAL EAGLE HEAD FRONT FENDER ORNAMENTS
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•Die-cast eagle fender ornaments in two different sizes •Small measures approximately 11/2” tall; large is approximately 21/2” tall •Available as all-chrome or chrome with gold beak, plus some with eyes that light up •Fit most front fenders; include gasket and mounting hardware •Sold individually SUG. PART # DESCRIPTION RETAIL DS-287556 Small chrome eagle head (gold eyes) $23.95 DS-287555 Small chrome eagle head w/ lights (red eyes) 27.95 DS-287554 Repl. bulb w/ wires for DS-287555 2.35 DS-287553 Large chrome eagle head w/ lights (amber eyes) 52.95 DS-287552 Large chrome/gold eagle head w/ lights (amber eyes) 65.95 A72-BP Repl. bulb for DS-287553/552 1.95
SKULL HEAD FRONT FENDER ORNAMENTS •Unique skull head ornaments available with or without illuminated eyes •Fit most front fenders PART # DS-287531 DS-287533 DS-287554
DESCRIPTION Skull head fender ornament Skull head w/ illuminated eyes, chrome Repl. bulb w/ wires for DS-287533
DS-287531 SUG. RETAIL $33.95 32.95 2.35
1421-0006
1421-0005
DELUXE REAR MUD FLAP WITH LIGHTS •Injection-molded with a chrome-plated, steel light backing plate insert, chrome mounting strip and two mini Baron® Custom Accents marking lights •Grilles sold separately NOTE: Will fit with trailer hitch PART #DS-720554. PART # DESCRIPTION DS-393740 Mud flap w/ lights DS-719974 Lens grilles (pr.)
SADDLEBAG-TO-FENDER SUPPORT BRACKET DS-393740 SUG. RETAIL $84.95 11.95
•Bracket eliminates unsightly OEM bracket on FLTR/FLHRCI/FLHRS models •Can be used when removing rear bumper and rail on FLT/FLHT models •Installs easily using OEM hardware •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-08 FLT MODELS; REPL. OEM #91140-98/04 1421-0005 Chrome $54.95 1421-0006 Black 39.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE DS-393703 DS-393702 PLATE FRAMES DS-393701 MUD FLAPS 7808-1080 7808-1079 1 TIRES, •Constructed of durable /8” rubber in a variety of styles TUBES & •Available 1420-0045 •Include mounting hardware DS-393704 WHEELS •Made in the U.S.A. DS-393698 1420-0046 DS-393760 SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL PART # DESCRIPTION HARDWARE, 1 1 91/2” W X 61/2” H (CONT) 101/2” W X 8” H (CONT) CHEMICALS 9 /2” W X 6 /2” H 7808-1080 Studded w/ conchos $21.95 DS-393702 Plain $9.95 DS-393701 Plain & TOOLS DS-393704 Studded w/ diamond center 20.95 1420-0045 POW-MIA 14.95 1420-0046 POW-MIA 1 17.95 10 /2” W X 8” H COVERS, DS-393703 Studded w/ plain center Nylon-reinforced rubber. 7808-1079 Studded w/ conchos 23.95 SECURITY DS-393760 Studded w/ reflectors and fringe 31.95 DS-393698 Studded w/ diamond center 19.95 & GENERAL 1
1
1006
All part numbers in BOLD MAGENTA are new for 2010.
SUG. RETAIL $12.95 19.95