INOX by S & Y Agencies

F S O A

TRALI US

DU RO CT

Product Information Applications & uses Technical Data Promotional Material

There is no substitute for Quality www.inox-mx3.com

WELCOME TO THE WORLD OF INOX

Since the introduction of INOX-mx3 to the Australian market in 1987 and from the hard struggle in the early years to today where INOX lubricants have now become recognised as the best quality products of their type available on the Australian Market. I have always believed in absolute quality and have strived to do that with the INOX brand of products. INOX Quality Products are formulated, field tested and manufactured to the highest quality standards assuring the user a complete and very satisfying result with their use in the wide and varied applications for these products. The formulation and field testing of INOX products can take several years before they are released for sale. This assures absolute quality and the ability to do the job everytime. I would like to take this opportunity to thank the countless number of people worldwide who have believed in and supported me and INOX products for the last 25 years John Chardon CEO Candan Industries Pty Ltd

INDEX INOX-mx2 Battery Conditioner

3 5

6 7

INOX-mx3 Anti-corrosion, Anti-moisture Lubricant INOX-mx5 Extreme Pressure, Liquid Lubricant with PTFE INOX-mx6 Extreme Pressure, Synthetic Food Grade, No Melt Grease with PTFE INOX mx-7 Extreme Pressure Assembly Lube with PTFE INOX-mx8 Extreme Pressure, High Temperature Grease with PTFE (Includes Wheel Bearing Report)

INOX-mx9 No Chukka Chain Lube with PTFE

9& 10

INOX-mx11 Chain & Brake Clean INOX-mx12 PTFE Supa Glide

LANOX-mx4 Heavy Duty, Anti-corrosion Lubricant with Lanolin

LANOX-mx4 Lanolin Grease TESTIMONIAL - Temora Air Museum (Servicing Warbirds)

TESTIMONIAL - INOX-mx2 Battery Conditioner (Bernie Winn re:- Removal of Lead Sulphation in batteries)

INOX® QUALITY PRODUCTS

There is no substitute for Quality

INOX PRODUCTS

Information, Approvals & Technical Data

BATTERY mx2 CONDITIONER Fo Cars, Motorcycles, Boats, Trucks, Buses, Aviation, For Fa Farm, Earthmoving, Mining, Forklifts, Industrial, Solar and Stationary Batteries

DISSOLVES BATTERY KILLING SULPHATION D BETTER BE AND FASTER COLD MORNING STARTS CONSTANT BRIGHTER LIGHTS RAPID POWER RECOVERY AND RECHARGE R HOLDS CHARGE LONGER BETWEEN USE INCREASES BATTERY EFFICIENCY UP TO 18% INC SIZES: 92ml (single battery), 1, 5 & 20 litre containers. SIZ Approximately 70% of lead-acid batteries over a period of time stop operating because of a build up of lead sulphate (sulphation) on the plates. Charging the battery does not stop this sulphation from happening. INOX mx2 Battery Conditioner can be added at any time during the life cycle of a lead-acid battery, but for the best results and longest life for the battery, it is best to add the INOX-mx2 Battery Conditioner at the start when the battery is brand new. Battery dosage instructions are included in each 92ml box and on the back label of the 1, 5 and 20 litre containers. Golf cart batteries require the following dosages, 6 volt - 60mls per cell, 8 volt - 45mls per cell and 12 volt - 30mls per cell. A single lead-acid battery cell is 2.2 volts but is normally taken as being 2 volts. 2.2 volt cells used in power supply, stationary, traction, solar batteries, etc have a special formula. All measurements and calculations must be done in metric, all measurements must be taken to the outside of the 2.2 volt cell casing. There is a 1000 litres in 1 cubic metre. To work out how much INOX-mx2 Battery Conditioner is needed for each cell: Multiply the width by the length by the depth of a single 2.2 volt cell, divide the answer by 2 and multiple by 3%. EG: A battery bank has 12 cells (like an electric forklift), each cell has a width of 10 cms (.1 of a metre), a length of 12 cms (.12 of a metre) and a depth of 60 cms (.6 of a metre), therefore .1 x .12 x .6 = .0072 divide by 2 = .0036 x .03 (3%) = .000108 (108mls). (.0036 of a metre multiplied by 1000 litres is 3.6 litres per cell and 3% of 3.6 litres is 108mls per 2.2 volt cell).

NB: INOX-mx2 Battery Conditioner is not a cure all, it will not fix mechanically unsound batteries. UP TO 12 MONTHS ADDITIONAL WARRANTY FOR BRAND NEW BATTERIES

When INOX-mx2 Battery Conditioner is added to a new lead-acid battery in the first 2 weeks after purchasing the battery and the completed warranty form is sent to Candan Industries Pty Ltd, there will be an additional full replacement warranty on the battery equal to the battery manufacturer's warranty to maximum of 12 months and will start the day the battery manufacturer's warranty expires.

F.A.Q’s. ON INOX-mx2 BATTERY CONDITIONER

What is INOX-mx2 Battery Conditioner. INOX-mx2 Battery Conditioner is an electro-chemical catalyst that can be added to all lead-acid batteries to increase the performance and life of the battery. What are the benefits of adding INOX-mx2 Battery Conditioner to a battery. It helps stop lead sulphate build up on the plates, increases battery life by up to 2 to 3 times, increases battery efficiency by up to 18%, gives brighter lights, faster starts and recharge. Will INOX-mx2 Battery Conditioner work in older batteries. Providing the older battery has only a sulphation problem and is mechanically sound, it should add another 1 to 2 years life to the battery. NB. There is about a 1 - 2% failure rate when adding INOX-mx2 Battery Conditioner to batteries that are 2 years old or more. What is the INOX-mx2 Battery Conditioners manufacturer's warranty. When INOX-mx2 Battery Conditioner is added to a new battery in the first 2 weeks and the completed warranty form is sent to Candan Industries Pty Ltd, there will be an additional full replacement warranty on the battery equal to the battery manufacturer's warranty to maximum of 12 months and will start the day the battery manufacturer's warranty expires. EG. Battery with 6 months battery manufacturer's warranty gets an additional 6 months with the INOX-mx2 Battery Conditioner (making 12 months warranty in total). 12 months plus 12 months (24 months in total), 24 months plus 12 months (36 months in total), etc.

NB. The INOX-mx2 Battery Conditioner in the 92ml single battery dose for standard batteries up to 100 Amp Hour has the additional warranty only. 3

ANTI-MOISTURE ANTI-CORROSION

mx3 LUBRICANT

THE ONLY LUBRICANT IN THE WORLD WITH THE SPECIAL MX3 ANTI-CORROSION, ANTI-MOISTURE FORMULA

DISPLACES - PENETRATES LUBRICATES - PROTECTS SIZES: 60ml Needle Injector, 100 & 300g Aerosol, 125 ml Pump Pack,5, 20 & 205 litre containers. A 500 ml spray applicator comes with each 5 & 20 litre and 6 with the 205 litre. Screw in taps are supplied with each 20 & 205 litre.

INOX-mx3 contains no silicon, acid, kerosene or dieselene. INOX-mx3 will no harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals INOX-mx3 doesn't dry out, gum up, become gooey or sticky or wash off with water. INOX-mx3 is non-conductive, non-static, non-toxic, non-corrosive and non-staining. APPROVALS NEW ZEALAND: NZFSA Approved C12 (All animal product except dairy) N. A. T. O. Defence Manufacturers Code No. Z5594/5 ( R. A. N. App.) Kosher Certificate K-ID FKD-HCTN Status Pavere

TECHNICAL ASTM 1298 ASTM D97 ASTM D92 DIELECTRIC

DENSITY @15.6 °C POUR POINT FIRE POINT

.850 -13 ° C 204° C > 40

ASTM D1744 ASTM D445

KARL FISHER WATER VISCOSITY @ 40°C @ 100°C

273.2 ppm 10.04 2.54

The applications for INOX-mx3 are too numerous to list here. It is suitable for all industries and is best explained in the following F.A.Q.’s What is INOX-mx3 ? INOX-mx3 is a High Grade anti-corrosion, anti-moisture lubricant. What makes INOX-mx3 different to other WD type sprays ? INOX-mx3 is made using a high grade machine oil base, contains no silicon, acid, kerosene or dieselene, WD type sprays use a kerosene or solvent base. Is INOX-mx3 safe to use ? INOX-mx3 has no toxic additives. It contains no carcinogens, halogens or allogens Why is INOX-mx3 superior ? INOX-mx3 will replace over 14 different products with just one can. What are some of the most common everyday uses for INOX-mx3 ? All domestic type use, Aluminium sliding doors and windows, door locks and hinges, garage roller doors, bicycle chains and cables, skate boards and roller blades, shower screens and curtain tracks, sewing machines, etc. Can INOX-mx3 be used as a polish ? INOX-mx3 is good as furniture polish for polished timber surfaces. INOX-mx3 will clean and polish stainless steel sinks (use a plastic 3m type cleaning pad). INOX-mx3 will clean and polish fibreglass (use towelling or cheese cloth). Why is INOX-mx3 a better lubricant around the home ? INOX-mx3 doesn't gum up, become sticky or gooey, DOESN'T DRY OUT OR WASH OFF WITH WATER. Other WD type sprays because of their solvent base tend to evaporate quickly, where INOX-mx3 because of its lubricating oil base will last much, much longer. INOX-mx3 will keep door locks, hinges, sliding doors and windows, skate boards and roller blades, bike chains, garage roller doors, etc, working like new for months on end. Can INOX-mx3 be used as a penetrant ? INOX-mx3 will readily penetrate the severest of corrosion and free up nuts, bolts, screws, threads, pins, bushes, bearings and parts from rust and corrosion and help keep them in good working order. Why is INOX-mx3 so good on fishing tackle ? INOX-mx3 will keep fishing reels corrosion free and in good working order. INOX-mx3 will not affect fishing lines, protect fishing rods, keeps hooks, swivels and lures corrosion free and in good condition. INOX-mx3 will not dry out or wash off with water. INOX-mx3 WILL NOT TAINT BAIT. Can INOX-mx3 be used on Sporting equipment ? INOX-mx3 sporting applications include pistols, rifles and shotguns, golf clubs and buggies, BMX and motor bikes, Go Karts, boating (both power and sail), off road vehicles. Use INOX-mx3 to clean, lubricate and protect the above. Can INOX-mx3 be used on power and hand tools ? INOX-mx3 will keep all air and electric powered tools clean, corrosion free and well lubricated. INOX-mx3 in the non-aerosol form can be sprayed directly into electric power tools to reduce bearing noise. Keep spanners, wrenches, planes, hammers, saws, etc, clean and in good working order. Use INOX-mx3 on oil stones when sharpening chisels, plane blades and knives.

INOX-mx3 F.A.Q’s continued. Can INOX-mx3 be used around the yard and in the garden ? INOX-mx3 can be used to lubricate and clean wheel barrow wheels, pruning shears, chain saws, garden tools, all lawn mowers and whipper snippers. INOX-mx3 helps stop lawn clippings sticking to the underside of mowers. Use INOX-mx3 to protect and lubricate children's play equipment and swings, pool pumps, gate latches, locks and hinges. Cleans and protects TV and radio antennas. What applications does INOX-mx3 have in Marine ? Use INOX-mx3 to lubricate and protect from corrosion, battery terminals, wiring, switches, lights, bilge pumps, outboard motors, alternators, starter motors, winch and control cables. Helps keep radios, radar, antennas and equipment free from corrosion. Lubricate sail tracks (will not stain sails), sliding hatches, locks & hinges. INOX-mx3 STOPS ELECTROLYSIS. Where can INOX-mx3 be used on cars ? INOX-mx3 lubricates and frees door locks and hinges, control cables and linkages, starts wet motors. Frees up nuts, bolts and parts frozen with rust and corrosion (exhaust manifolds and pipes, suspensions, etc). Cleans and polishes vinyl dashes and upholstery. Spray INOX-mx3 across the front of the vehicle when travelling long distances at night in the country, it will make it easier to remove the bugs and insects next day. Does INOX-mx3 have a commercial application ? INOX-mx3 is used for the repair and servicing of air conditioners, office equipment, ride on mowers, chain saws, welders, woodworking and laminating machines, air and power tools, etc. INOX-mx3 stops computer keyboards from sticking. Keeps electrical and electronic plugs, connectors, micro-switches, terminals, circuits, power boards, solenoids and switch gear free from corrosion and in good working order. Lubricates CPU fans (computers). Does INOX-mx3 have a farming application ? Use INOX-mx3 to lubricate and protect from corrosion, PTO splines and couplings, sprockets, chains, irrigation pump motors, windmill gears and linkages, electrical systems, starter motors, generators, alternators, relays, solenoids, battery terminals, shearing hand pieces, overhead gears and drive shafts, winches and cables. Frees up corrosion and rust frozen parts, track & blade bolts, exhaust systems, nuts, bolts, pins, bushes & pin bearings. Does INOX-mx3 have a transport application ? Use INOX-mx3 to lubricate and protect air brake slack adjusters and linkages, roller doors, side curtain tracks, door locks and hinges, air and electric start motors, wiper motors and linkages, alternators and air horns. Use INOX-mx3 to protect and give longer life to brake, tail & clearance lights, relays, battery terminals, solenoids, wiring, electrical and air hose connectors. Use INOX-mx3 for repair and service work on fuel injectors and pumps. Does INOX-mx3 have an industrial application ? INOX-mx3 is Food Grade approved, the Australian Government Instrument of Approval is freely available on request. Use INOX-mx3 to stop corrosion and give protection to coldroom fan motors, electric forklift systems, switches, relays, solenoids, wiring and motors in high moisture areas. Lubricate and protect pneumatic systems and solenoid valves, factory roller doors, sea container latches and hinges. INOX-mx3 is very good for cutting and milling Aluminium, stops tool chatter. Use INOX-mx3 for tapping and thread cutting. Protects blow moulds, dies and printing plates. THE INOX FINGER TEST This is a very simple test to show the quality and durability of INOX. On the first finger of one hand, spray WD40, CRC5.56, RP7 or any one of the other WD type products and rub the finger and thumb together vigorously. On the first finger of the other hand, spray INOX. Rub the finger and thumb together the same way. After about 20 - 30 seconds the finger that has been sprayed with the WD type spray will start to become dry and lose it's lubricating ability whereas the finger that has been sprayed with INOX will continue to stay wet and slippery.

CAUTION: INOX-mx3 may affect some natural rubber products with continual long term use (refer to LANOX)

FOOD GRADE mx3 FG

LUBRICANT

FOR FOOD & BEVERAGE PROCESSING MACHINERY AND EQUIPMENT INOX-mx3 FG is a specially designed anti-corrosion lubricant for the food and beverage processing and manufacturing industry, complys with all FDA regulations and is NSF listed.

INOX-mx3 FG contains no silicon, acid, kerosene, dieselene or toxic compounds INOX-mx3 FG will not harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals. FOOD GRADE APPROVALS INOX-mx3 FG doesn't dry out, gum up, become gooey or sticky AUSTRALIA: Lubricant (Type A) or wash off with water. USA: NSF Listed H1 #143848 (Aerosol) INOX-mx3 FG is non-toxic, non-static, non-corrosive & #143849 (Liquid) non-conductive and non-staining. SIZES: 300g Aerosol, 5, 20 & 205 litre containers. A 500 ml spray applicator comes with each 5 & 20 litre and 6 with the 205 litre. Screw in taps are supplied with each 20 & 205 litre. TECHNICAL ASTM 1298 ASTM D97 ASTM D92 DIELECTRIC

DENSITY @15.6 °C POUR POINT FIRE POINT

.852 -13°C 204°C > 40

ASTM D1744 ASTM D445

KARL FISHER WATER VISCOSITY @ 40°C @ 100°C

273.2 ppm 10.04 2.54

MX5

Plus

EXTREME PRESSURE FOOD GRADE LUBRICANT QUALITY ANTI-CORROSION PROTECTION IN INOX-mx5 plus has been specially formulated by modifing the origional INOX base formula together with the addition of th the high grade friction modifier Polytetrafluoroethylene (PTFE) th IN INOX-mx5 Plus has been designed for applications where a superior extreme pressure, anti-corrosion, anti- moisture, liquid su lubricant, a high grade penetrating oil or an industrial quality lu machine cutting lubricant is required. INOX mx5 Plus will not harm metal points or surfaces, fibreglass, formica, painted or enamel finishes, plastics or neoprene seals. INOX mx5 Plus will not become tacky, alter surface tolerances, dry out or wash off with water. INOX mx5 Plus is non-toxic, non-corrosive, non-corrosive and non-staining. Polytetrafluoroethylene (PTFE) is premium grade extreme pressure anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced friction environment also lowers operating temperatures. SIZES: 30ml Needle Injector, 300g Aerosol FOOD GRADE APPROVALS 5 & 20 litre Containers Australia: Lubricant (Type A) USA: NSF Certified H1 #143846 (Aerosol) & #143845 (Liquid) USA. Kosher Certificate K-ID DZH-PBQH Status Pavere

TECHNICAL

ASTM 1298 ASTM D97 ASTM D92 DIELECTRIC ASTM D1744

DENSITY @ 15.6°C POUR POINT FIRE POINT KARL FISHER WATER

.865 -13°C 204°C 33 254.4 ppm

ASTM D445 ASTM D2509 ASTM IP239

VISCOSITY @ 40°C @ 100°C Timken, OK load Kg 4 - Ball Weld Test

mx6

10.86 2.74 20 275

FOOD GRADE MACHINERY GREASE

EXTREME PRESSURE HIGH TEMPERATURE (NO MELT) FOOD GRADE MACHINERY GREASE with P T F E

INOX-mx6 is a fully synthetic Extreme Pressure grease formulated to give premium performance and food grade purity. This grease is composed entirely of ingredients which meet the requirements of sectio 178.3570 of the US FDA regulations and have been cleared for use within registered establishments by the US Department of Agriculture and will not deleteriously affect meat products. INOX INOX-mx6 6 is i a smooth th lilight ht b browngrease made from polyalphaolafins and a special bentone thickner.It contains additives to protect against corrosion and oxidation. It has a temperature range of -300C to an extremely high temperature (HAS NO MELTING POINT). It will operate not stop to 2500C all day with short bursts up to 3000C without breaking down. Polytetrafluoroethylene (PTFE) is a premium grade anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced friction environment also lowers operating temperatures. INOX-mx6 WILL NOT AFFECT RUBBER. NB. INOX-mx6 is a premium grade clay based Extreme Pressure grease. Using it with a non-clay based grease can seriously affect it's performance. Before using INOX-mx6 grease, it is advisable to remove any other non-clay based greases by flushing or pushing out the old grease with INOX-mx6 in a grease gun.

INOX-mx6 continued. SIZES: 30g Tube, 375g Tub, 400 & 450g Cartridges, 2.5 kg Pail, 20 &180 kg Drums

FOOD GRADE APPROVALS: AUSTRALIA: Approved LUBRICANT (Type A) USA: NSF Registered H1 #143844 NEW ZEALAND: NZFSA Approved C15 (All animal product except diary).

TECHNICAL

NLGI Appearance Penetration at 25°C Worked, 60 Strokes Dropping Point, °C Lower Operating Opera ating ti g Temp. Temp. °C Te

2 Smooth, light brown 265 mim - 295 max Does not melt -30 0

D.217 D.2265 D.1743

Rust Prevention Rating Timken, OK Load, Kg 4-Ball Weld, Kgf Base Oil, cSt @ 40°C @ 100°C

MX-7

Pass 23 500 46 7.8

D.2509 IP.239 D.445

EXTREME PRESSURE PTFE PASTE

Engine & Cylinder Head Assembly Injection Mould Tool Lubricant Mechanical & Electrical Equipment Assembly Thread & Pipe Anti - Seize Extreme Pressure Anti - Friction Applications

INOX mx-7 is a specially formulated Extreme Pressure Lithium based grease containing a high

percentage of Polytetrafluoroethylene (PTFE) designed for Ultra Extreme Pressure Lubrication applications and where tough Thread Anti-Seize applications are required. INOX mx-7 provides high film strength, protects against start up damage in new and reconditioned machinery

after long down periods before initial startup. INOX mx-7 gives long term lubrication to parts and machinery that are difficult or impossible to lubricate after assembly. INOX mx-7 allows for more even torque pressures and faster breakouts of joints, gaskets and threads. INOX mx-7 contains anti-corrosion additives P.T.F.E. - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures

TECHNICAL

NLGI Lithium Soap, % mass Colour Texture Operating Temp. Range, °C Penetration at 25 °C Worked 60 strokes Dropping Point, °C Oxidation Stability: Pressure Drop at 100 hr, kPa

0 4.7 Light Brown Smooth -20 to 180 D.217 D.2265

370 typical 190

D.942

Rust Test Timken, OK Load, kg 4-Ball EP Weld Point, kgf 4-Ball Wear Scar, mm Base Oil Specification: Viscosity, cSt at 40 °C Teflon (Polytetrafluoroetylene) %wt Solubility in Water

D.1743 D. 2509 D.2596 D.2266

Pass 24 350 0.48

D.445

190 12 < .1 g/l

SIZES: 125gm Tubes & 18 kg Drums

mx8 PTFE

EXTREME PRESSURE GREASE

PREMIUM INDUSTRIAL GRADE EXTREME PRESSURE HIGH TEMPERATURE LITHIUM COMPLEX GREASE with PTFE The extreme pressure and anti-wear properties of INOX-mx8 grease gives long service life under high loading and shock loading conditions from very low to very high temperature environments. These special characters of shear stability, combined with the inclusion of effective rust, oxidation and corrosion inhibitors and tackiness adhesives, ensures this grease to be the preferred recommendation for sealed for life anti-friction bearings. 7

INOX-mx8 continued.

INOX-mx8 has the ability to prevent scuffing and reduce wear under high load and shock load conditions, together with its excellent high shear stability and high temperature operation, makes INOX-mx8 the preferred choice over other E.P. greases. INOX-mx8 resists 'SQUEEZE OUT' from surfaces requiring lubrication under load conditions. INOX-mx8 has excellent resistance to water and water wash out even at elevated temperatures. Effective lubrication is maintained and it also gives protection against corrosion. INOX-mx8 will not thin out because it is shear resistant or thicken because it resists oxidation. P.T.F.E. - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures. SIZES: 300g Aerosol, 400 & 450g Cartridges, 500g Tub, 2.5 kg Pail, 20 & 180 kg Drums

TECHNICAL

NLGI Soap Type Colour Texture Penetration at 250C Worked, 60 Strokes Dropping Point, 0 C Lower Operating Temp. 0C Leakage, Wheel Bearing 65g Packed, 163 0C, g. Water Washout at 80 0C, % Oil Separation 24 hours at 250C kPa

D.2172

I2 Lithium Complex Red Smooth & Tacky 80 min. - 305 max

D.2265

260+ -20

D.1263 D.1264

1.5 3.5

D.1742

Oxidation Stability Pressure drop @ 100 H0ur kPa @ 500 Hour kPa Lubrication Life, Bearing No 204 10000 rpm, 163 0C, Hours Rust Prevention Rating Timken, OK Load,Kg 4-Ball Weld, Kgf 4-Ball Wear Scar, mm Base Oil, cSt @ 40 0C @ 1000C

D.3336 D.3336

15 70

D.3336 D.1743 D.2509 IP.239 D.2266 D.445 D.445

125 Pass 26 575 0.48 190 18.0

MX9

SUPERIOR GRADE HIGH SPEED EXTREME PRESSURE

SIZES: 150g & 300g Aerosol

INOX-mx9 No Chukka Chain Lube with PTFE is a superior grade, high speed, extreme pressure chain lube formulated with special tackifiers to help make it stay on the chain.

INOX-mx9 also contains the extreme pressure friction modifier polytetrafluoroethylene (PTFE) for greater lubrication and reduced wear on the chain, links and sprockets under heavy load conditions. INOX-mx9 also has a very resistance to salt and chemical corrosion and water wash out.

P.T.F.E. - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures

MX11

Readily removes oil, grease and brake fluid without disassembly SIZES: 500g Aerosol & 20 litre

INOX-mx11 CHAIN & BRAKE CLEAN

is a fast acting degreaser for removing brake fluid, oil, grease or oil/grease dirt contaminants from chains and brake assemblies (including linings and pads), clutch plate/pressure plate assemblies before or after disassembly, leaving them bone dry and squeaky clean in a matter of minutes with no residue. In instances where the oil/grease and dirt is caked on, a second application maybe required and at the same time it is advisable to use a firm non-metallic bristled cleaning brush to help loosen any caked on contaminant. It also can be used as a degreaser for all engine & power tranmission parts.

MX12 THE ULTIMATE EXTREME PRESSURE DRY LUBRICANT with PTFE

INOX-mx12 PTFE SUPA GLIDE is a fast drying, resin bonded polytetrafluoroethylene dry film lubricant for the coating of timber, metal, plastic, rubber, glass and most other surfaces. It is designed for low-friction, light load repetitive stresses that allows moving parts to wear longer, work harder and require less maintenance. Has applications where other conventional sintered PTFE coatings cannot be considered.

. .. . .

Excellent lubrication qualities Clean and easy to apply Good surface adhesion sistant surface Inhibits corrosion Doesn't wash off with water Longer wear life than pure PTFE coatings Thin film Cures at room temperature Resists contamination from dirt & dust Life-long lubrication in many applications Coefficient of friction: Film thickness: Service temperature: Intermittent temperature: Chemical resistance:

0.06 to 0.09 (static) 5.1 to 17.8 um ( 0.0002 to 0.0007 inches ) 180 °F ( 82 °C ) 240 °F ( 116 °C ) INOX-mx12 PTFE SUPA GLIDE coatings are moderately resistant to some inorganic corrosives such as sulphuric acid and sodium hydroxide. CAUTION: Contact with organic solvents such as alcohols, esters and keytones should be avoided.

The surface to be coated must be clean, dry and free of any contaminants such as dust, oil, grease or powder. Information on surface preparation for more critical applications is listed below. Once the surface area has been prepared, spray a liberal coating on the area you want to lubricate and then allow time for the carrier and propellant gas to evaporate. Curing times are listed below Before applying INOX-mx12 PTFE SUPA GLIDE, the surfaces sould be clean, dry and free of contaminants such as oil, grease, dust or powder. A light sanding with 120 grit sandpaper or emery cloth followed by a solvent wipe and air dry is usually sufficient. More critical applications requiring optimum adhesion, the following pretreatments are suggested. WOOD STEEL STAINLESS STEEL ALUMINIUM COPPER ALLOYS RUBBER, PLASTICS, GLASS

Sand lightly and wipe clean Degrease or sandblast Degrease or sandblast Degrease, sandblast or anodize Degrease, sandblast and/or acid etch Clean with a solvent that will not affect the substrate

SIZE: 175g Aerosol

INOX-mx12 PTFE SUPA GLIDE will cure at room temperature. Coatings are touch dry in about 5 minutes, dry enough to handle in 20-30 minutes depending on the film thickness. Optimum hardness for the best lubrication performance is 2 hours. You have to allow at least 2 hours from application before use. Overnight curing will give the best long term results.High humidity may increase opacity or blush and exposure to strong sunlight may cause darkening, but these will not affect the coating performance. R

Superior Anti-corrosion Lanolin Grease A QUALITY FOOD GRADE LANOLIN GREASE FOR PROTECTION AGAINST RUST, CORROSION AND MOISTURE IN ALL INDUSTRIES WHERE EXTREME CLIMATIC AND HIGH HUMIDITY CONDITIONS FOOD GRADE APPROVALS

AUSTRALIA: Lubricant 10 (Type A) USA: NSF Registered H1 #1438 KOSHER CERTIFICATE: K-ID HTH-BBQK status Pavere 9

LANOX-mx4 Grease continued.

LANOX-mx4 Grease is a non-toxic, Food Grade Approved Lanolin grease. It is made from a pure high technical grade anhydrous lanolin, food grade approved additives and anti-oxidents. It has been especially designed to remain pliable at very low temperatures with the right amount of gripping tackiness to hang on and still have flexibility for the user. LANOX-mx4 Grease is waterproof, non-conductive and safe to use on all surfaces. It is highly suitable for anti-corrosion, rust proofing and anti-fouling coatings for all metals. LANOX-mx4 Grease is non-carcinogenic, bio-degradable, highly resistant to salt and acid corrosion. LANOX-mx4 Grease is environmentally and user friendly. SIZES: 500g Tub, 2.5kg Pail & 20kg Drum Appearance:

Density: Flash Point: Solubility in water:

Pale tan solid. Has no lanolin odour 48°

Pour Point:

LANOX

.8325g/l 162°C Insoluble

HEAVY DUTYmx4

ANTI-CORROSION LANOLIN LUBRICANT

DESIGNED FOR HEAVY INDUSTRIAL, MINING, FARMING, MARINE, EARTH MOVING AND TRANSPORT TYPE USE AND WHERE EXTREME CLIMATIC AND HIGH HUMIDITY CONDITIONS PREVAIL. SIZES: 300g Aerosol, 5, 20 & 205 litre containers. A 500ml spray applicator comes with each 5 & 20 litre and 6 with the 205 litre. Screw in taps are supplied with each 20 & 205 litre.

Lanolin is a natural wax found in animal wool especially the wool from sheep, commonly referred as 'WOOL FAT' or 'WOOL GREASE', it has wide spread uses, cosmetics, medical, soaps, etc. Down through the centuries the Egyptians, Romans, Vikings, sailors and soldiers alike all used lanolin as a very effective anti-corrosion and waterproofing agent for a variety of metals, materials, timbers, to protect sails, leather, cannons, etc. Although we make INOX-mx3, a quality anti-corrosion lubricant, there are areas where a lanolin based anti-corrosion lubricant like LANOX-mx4 is sometimes better suited for the application. LANOX-mx4 is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and refined pure lanolin base with specialized chemical compounds. LANOX-mx4 contains no silicon, kerosene, acids or dieselene. LANOX-mx4 is harmless to metal points and surfaces, plastics, painted and enamel finishes, fibreglass, formica, rubber or neoprene seals. LANOX-mx4 doesn't become sticky, gooey or gum up. DOESN'T DRY OUT OR WASH OFF WITH WATER LANOX-mx4 is non-conductive, non-static, non-corrosive and non-toxic.

TECHNICAL ASTM D4052 DIELECTRIC ASTM D93 ASTM D97

DENSITY @ 15.6 °C FLASH POINT POUR POINT

.8461 26 179°C -26°C

ASTM D445

VISCOSITY (cSt, 40°C) (cSt, 100°C) SOLUBILITY IN WATER

13 2.4 NEGLIGIBLE

F.A.Q’s ON LANOX-mx4 LUBRICANT. What is LANOX-mx4 ?

LANOX-mx4 is a pure refined Lanolin and machine oil based anti-corrosion, anti-moisture lubricant.

What difference is there between LANOX-mx4 and INOX-mx3 ?

LANOX-mx4 has been designed for a more heavy duty application than the original INOX-mx3, it is not food grade approved like INOX-mx3 because it contains Lanolin, solvents and oil, it has no adverse affect on rubber.

Can I use LANOX-mx4 for applications that I would normally use INOX-mx3 ?

In about 60% of instances LANOX-mx4 and INOX-mx3 will have the same results as both contain no silicon, acids, kerosene or dieselene. They are both top quality lubricants, cutting agents and anti-moisture, anti-corrosion sprays. INOX-mx3 is food grade approved whereas LANOX-mx4 is not.

LANOX-mx4 FAQ’s continued. What are the areas that LANOX-mx4 would be preferred over INOX-mx3 ?

For example LANOX-mx4 is more suitable in certain marine applications such as Anchors, Chains and Shackle Bolts and in the protection of Outboard and Inboard Motors. INOX-mx3 would be best used in areas such as Marine Radios, Sail Tracks (non-staining) and the protection of stainless and aluminium fittings ( good for polishing aluminium and fibreglass). For use in Firearms, LANOX-mx4 is best used for long term storage purposes whereas INOX-mx3 has better applications for the day to day cleaning and lubrication (anti-static) so it doesn't attract dirt and helps clean barrel residues easier.

Does LANOX-mx4 have applications in the Farming Industry ?

Because of it's Lanolin base it has good long term applications in areas such as cutter bars on headers, lawnmowers, linkages, etc to protect against rust and corrosion (spray onto moving parts to give protection during stand down periods). LANOX-mx4 is a good anti-corrosion agent for bare metals in storage, stock crates or as a protectant after welding. LANOX-mx4 is also a good long term lubricant for areas that traditionally receive little maintenance attention (ie. gate hinges, stationary motors, etc).

Does LANOX-mx4 have applications for Earthmoving Equipment ?

LANOX-mx4 can be used as long term lubrication for linkages, cables couplings, etc and for corrosion protection in electrical systems as well as an anti-seize on track bolts and wheel studs.

Can LANOX-mx4 be used as a cutting lubricant ?

Yes, tests conducted prior to it's release found that LANOX-mx4 is an effective cutting, milling, tapping and thread cutting lubricant for a variety of metals. It is especially effective on aluminium

WHEEL BEARING REPORT The photos shown below are of 2 wheel bearings out of the same wheel hub of a rental car from one of Australia’s major car, bus and truck rental companies. Both bearings had been installed in the wheel hub for approximately 12 months before the hub was pulled down for inspection and this is what was found to be the problem. Both bearings are of the same quality standard. Both bearings were disassembled and washed in Perchloroethylene (an evaporating solvent) and allowed to dry and then photographed.

The first bearing was lubricated with a supposedly high quality imported grease from the U.S.A. As you can see from the photo, the bearing spindle has about 80% of the hard cased bearing surface stripped away and the bearing rollers are in not much better shape. CAUSE: The grease used on this bearing was of such poor quality lubrication-wise that it totally failed, causing the bearing to overheat and tear away the hard cased bearing surface and in turn destroying the bearing rollers.

The second bearing was lubricated with INOX-mx8 EP Grease with PTFE. As you can see from the photo, there is absolutely no wear with this bearing, it’s as good as the day it was fitted. NB. Each bearing was treated equally when they were disassembled and were only washed in solvent, allowed to dry and then photographed.