product spotlight FEBRUARY - MAY 2022
Specialist Tool Solutions
Induction Heater Deluxe Kit
960400SP
Three
ARRAN YEAR W
TY
NOW WITH
3 YEAR WARRANTY!
£715.00
1 KILOWATT INPUT 1 KILOWATT OUTPUT
Applications Include: ABS Sensors Brake Bleeder Nuts Exhaust System Heat Treating Inline Connectors Metal Fabrication
• • • • • •
• • • • • • •
O2 / DPF Sensors Truck Bed Bolts Body Panel Dents Tie Rod / Ball Joint Ends Suspension Components Steering Components U-Bolts
Generates ‘Invisible Heat’ to release corroded and thread locked metal components without the danger of an open flame Angled design with trigger Fault override delay Coil Twist Lock™ User controlled LED light switch LED usage indicator Fan operation enhancements
• • •
The Deluxe kit includes a removable tray with eleven labelled coils; including nine interchangeable pre-formed coils to heat fasteners up to 1 1/2” in diameter and are a variety of lengths from 4” – 10” long, the flexible Bearing Buddy for wrapping around inline and asymmetrical objects and the straight heat resistant U-Form coil for DIY winding. Standard kit also available as part number 96040000
SP 12V Induction Heater +
• • • •
9602012V
• • •
SP 110V Induction Heater +
96021100
12V / 70AMP / 840WATT
Completely portable - works with any 12v battery pack or 12v battery Bright led lamp illuminates work surface Durable reinforced thermal plastic housing with slip resistant grenade style grip Thermal overload protection
£710.00
• • •
Reverse polarity protection Over voltage protection Includes 3 x coil attachments
• • • • •
960260SP
Includes features as per SP Induction Heater + Includes full CE certification Includes rope, u-form & pre-formed coil
Kit Contents:
• • • •
Use three / four windings of coil for maximum performance 762mm length
NEW!
19mm Thin Wall Coil 21mm Thin Wall Coil 22mm Thin Wall Coil 25mm Thin Wall Coil
STORAGE TUBE
NEW!
96017000 £169.95
•
Kit Contents:
•
INCLUDES
Essential Coil Kit
£19.95 The heat resistant mat helps extend the life of the rope coils by preventing abrasion and overheating of the coil 152 x 305mm
NEW!
£129.95
Set of three highly adaptable coil allows user to shape to suit
96028000
For site work, construction and factory maintenance users Time saving tool ideal for use in all environments and makes the completion of on-site risk assessments far easier
96016000
£103.95
Heat Resistant Insulation Mat
£755.00
Thin Wall Coil Pack
SP Rope Coil Set - x3
• • •
UK/EU: 110V/6 AMP/1000 WATT
• •
2 x 22mm, 2 x 19mm, 1 x 25mm pre-formed coils 1 x 22mm, 1 x 22mm LCK, 1 x 25mm long pre-formed coils
INCLUDES STORAGE TUBE
NEW!
1500kg Mobile Double Scissor Lift Table For EV Batteries
• • • • •
GO1480
1500KG RATING
Easy to use, safe and ergonomic - ideal for lifting electric-car batteries as well as lifting and moving motors & automatic gearboxes Powered by compressed air, the table allows convenient battery installation or removal, thanks to the sliding cover that can be opened High ground clearance for use with all workshop cranes on the market Easy to manoeuvre and tilt with straight forward operations The top table is extendable and tiltable with a mechanical screw, featuring M12 threaded holes for mounting all types of supports or fixings such as; special hooks & brackets, plastic caps and protective mats Specifications: Total weight - 400 Kg Max. lifting capacity - 1500 Kg Lifting height - 560/ Lifting/lowering time - 60 s 1800 mm Power supply - 6/8 bar
• • • • •
• •
Mechanical Lowering Safety with Rack is useful for maintenance; it only lowers when the operator presses the button and locks automatically when not in use Suitable for all types of battery and other automotive components up to 1500 kg
£5395.00
Comprehensive EV Battery Maintenance Table
92971000
The Comprehensive EV Battery Maintenance Table is designed to meet the needs of removing electric batteries from vehicles in a safe and secure manner
• • • • • • •
Full tilting capacity with three locking positions - providing a stable platform for maintenance and repair activities Includes 4 x tall pins, 4 x rising plates and 4 x sets of pegs in 4 sizes (4 pegs per set) to secure the battery to the table for safe workshop transportation and tilting suitable for all shapes and sizes of battery Can be mounted onto an existing hydraulic table, otherwise it can be supplied as part of the package (contact Sykes-Pickavant’s customer service team or your local distributor for further details) Tilt function allows for bleeding of the battery and space saving storage when not in use Four central lifting pads provide safe and easy battery removal as well as smooth installation back into the vehicle Can also be used for engine / gearbox removal UK Patent pending
£2895.00 Heavy Duty Workshop Presses
Battery Powered Wheel Lifters
• • •
Push button on handle for easy one handed operation Powered by two 12 V 12 Ah batteries with LED charge indicators Four swivel wheels for easy movement of the trolley and low centre of gravity for stability against tipping
•
Special handle shape provides a convenient point of grip and minimum interference during the mounting/ dismounting operation of the tyres
• • • • • •
34196000 60KG OPTION Maximum Capacity: 60kg Max. wheel hub height: 1450mm Vertical Acceleration: 0.10 - 0.14 m/s
• • •
Run: 1180mm Base Width: 725mm Base Depth: 720mm
34196500 100KG OPTION Maximum Capacity: 100kg Max. wheel hub height: 1790mm Travel Speed - 120 m/s
• • •
£5499.00
Run: 1290mm Base Width: 980mm Base Depth: 850mm
Manual Wheel Lifter
34195500
£2295.00
35KG £1499.00
Operated using battery powered or pneumatic screwdriver with 1/2” square socket Features four swivel wheels and special handle shape as with the battery powered options
• •
• • • •
Lowering of the base bracket allows for easy wheel loading Max. Capacity - 35kg Max. Wheel Hub Height - 1200mm Max. Screwdriver Speed - 2000rpm Working Temperature - -5°C; +45°C
• • •
Run - 950mm Base Width - 840mm Base Depth - 770mm
Range of heavy-duty presses rated from 60 - 100 tonne featuring: Fast and safe adjustment of the press table height Hard chrome piston with 300mm of stroke TY Pressure gauge Moveable cylinder ARRAN YEAR W Three Two V-blocks Wide insertion width
• • • •
• •
Hand / Foot Operated
• • • •
Air assisted dual operation via foot pump or pump handle Air connection fitted with water separator Fast and safe adjustment of the press table height, using a braked winch Fast air return
Part no.
Rating
Working Area H x W (mm)
Price
53416000
60T
760 x 1005
£3899.00
53417000
70T
760 x 1005
£3999.00
53411000
100T
915 x 1035
£5499.00
Electro-Hydraulic
• • •
90° hinged pump unit enables easier insertion of longer work-pieces Multi-adjustable pressure valve Fast and safe adjustment of the press table height, using a braked winch
Part no.
Rating
Working Area H x W (mm)
Acting Cylinder
Price
53426000
60T
760 x 1000
Single
£4899.00
53426600
60T
760 x 1005
Double
£5199.00
53421000
100T
915 x 1035
Double
£7499.00
Ecomax Dual Service Equipment
53407500
£2349.95
A 6 in 1 cleaning system that removes problematic deposits from combustion chambers, injectors, throttle body, inlet valves, EGR, manifolds and DPF. Effective cleaning for petrol and diesel engines, eliminating the need for injector removal. The Injector Max system cleans and restores original fuel flow, allowing maximum fuel efficiency Features: Dual Tank – Avoids cross contamination of fluids Robust and reliable workshop quality machine Air operated and simple to use Universal fitting kit Suitable for petrol and diesel engines Fluids premixed and ready to use After Service Benefits Cleans DPF and Catalytic filters on vehicles Reduces exhaust emissions Restores fuel economy and engine performance
• • • • • • • • • • • • • • • •
Soap-based treatment designed to breakdown soot and ash particles restoring flow to a particulate filter. Recommended for use when a DPF has become completely blocked and is unable to trigger its own active regeneration Features:
• • • •
• •
Removes carbon deposits Cleans injectors
Low Voltage Operation - works off the vehicle’s battery when the engine is running
£3695.00
Easy to use - no or little disassembly of the engine required Low maintenance made in the UK ARRANTY TWO YEAR W Fixed HHO supply Two year warranty
“THE RESULTS SPEAK FOR THEMSELVES” CAN HELP TO REDUCE EMISSION LEVELS TO CONFORM WITH THE LATEST MOT REGULATIONS
Replacement Fluid
• •
£9.95
53400400
Replacement Fluid for 53400300 Carbon Tec HHO Supplied in 350ml bottle
Premium ATF Machine
• • • • •
350820SP
Automatic Operation - via control panel with large LCD colour screen Zero Cross-Contamination - cleans the circuit with just 1 litre of oil and prevents cross-contamination between different ATF oils Automatic Recirculation Function - prevents any overpressure related damage Automatic ATF Temperature Measurement - allows for flushing to start automatically when oil conditions are ideal Automatic Flow Direction provided by the pressure sensors
Reduces soot and exhaust gas emissions Maintains higher engine performance
£38.95
No DPF removal necessary Lower maintenance cost Time and labour savings
6PC ALSO AVAILABLE
534044-06 £233.70
80L Air Operated Oil Extractors
53380000
Features: Carbon steel reservoir Epoxy coated finish Pneumatic umatic emptying
• • • • • • • • • •
53380500
£435.00
Drain bowl with drain filter grid
£339.00
Pneumatic Oil Extractor for fast recovery of engine oil from any vehicle Extraction takes place from the engine sump with oil at 66° C Includes six probes for extraction Visual indicator ndicator of oil for ease of use Includes pressure safety valve set at 7.2 bar
53380500 includes 10l plastic viewer with ‘Stop Ring’ mechanism to ensure bowl cannot fall onto the viewer
• • •
Includes 3 adaptors for models with integrated suction tubes; Mercedes Volkswagen
•
BMW
Adaptor Kit 1
35083000 Applications Include: GM, Fiat, Ford, Jeep, Chrysler, Saab, Mercedes, BMW, Jaguar, Volvo, Land Rover, VW, Rover, Opel, Alfa Romeo*
£635.00 Adaptor Kit 2
35083100
£3395.00
TWIN PUMP MODEL - FASTER FLUSHING
Improves fuel economy
• • •
Promotes efficient engine operation with a cleaner engine Hydrogen runs into the combustion engine’s air inlet system whilst running Portable machine - enables use away from the normal garage environment
MADE IN THE UK
Restores flow to completely blocked DPF
Benefits:
53400300
Carbon Tec HHO
53404400
DPF Restore
REQUIRES ADAPTOR KIT
Applications Include: Volvo, PSA Group, Renault, Jeep, Mitsubishi, GM, Suzuki, Toyota, Saab, Mercedes, Ssangyong, Audi, VW, BMW, Jaguar, Nissan, Daihatsu, Suzuki, Fiat, Lancia, Ford, Porsche, Alfa Romeo, Cadillac, Land Rover, Chrysler* *Model restrictions apply, see website for full application list
£685.00
Portable 4 & 5 Gas Analysers
• • • • • • • • •
INCLUDES FREE 32425000 INFRA-RED PRINTER WORTH £349.95
Measures gasses to class 1 accuracy Suitable for Petrol and LPG vehicles
SPECIAL Class 1 MOT Approved 4 & 5 Gas Analysers ONLY 1.1KG O F F E R ! •• Does not require daily reconfiguration Ideal for both static and dynamic testing
• • • • • •
Ideal for both static and dynamic testing fault diagnosis, tuning, pre-MOT testing Provides Lambda / AFR measurement and corrected CO
Multi-lingual - English, French, German, Italian, Spanish as standard
Internal memory – stores 250 test results automatic and manual recording options
Infra-Red Gas Bench measures the three IR gases (CO, HC, CO2)
Pump speed control Bluetooth connectivity to PC (additional software required)
O2 & NOX are measured using electrochemical sensors Test results can be recorded manually or automatically at timed intervals; internal memory stores up to 250 test results
Free analytical software available Includes printer and AC & 12v chargers Part no.
Gas No.
325200SP
4
325232SP
5
PC compatible (with optional software) Long life internal battery - up to 8 hours between recharges - via mains or 12v (dependent on use)
Price
Part no.
Gas No.
CO, HC, CO2, O2
£1969.00
32424000
4
CO, HC, CO2, O2
£2100.00
CO, HC, CO2, O2, NOX
£2375.00
32424200
5
CO, HC, CO2, O2, NOX
£2496.00
Measures
Measures
Price
• •
Provides Lambda / AFR measurement, and corrected CO Fast warm-up - 150 secs.
69070000
Locking Lug Nut Remover Kit
THE ONLY KIT THAT REMOVES ALL LOCKING LUG NUTS The ultimate tool to remove the most difficult locking lug nuts in the quickest and safest way
• • • • • • •
Designed to accommodate even the newest locking lug nuts featuring complex designs and harder material
Ideal for use in place of lost or damaged locking wheel nut keys Professional kit : made of solid material that can work on the hardest lug nuts Very easy and quick to use : approx. 4 to 8 minutes per wheel Universal: Works on all types of sockets from any brand Works on all modern cars with oddly shaped lug nuts
£325.00
Also works on damaged lug nuts EASY EXTRACTION PROCESS
APPROXIMATELY 4 - 8 MINUTES PER WHEEL! Lithium Powered Cordless Soldering Iron
• • • • • • • •
SPEEDLINE5001
•
30W Soldering Iron with 35 minute warm up time & 35 minute run time, heats up in 10 - 15 seconds Lithium Battery = 500-700 charge cycles, can also be used connected to mains Cordless operation with no gas required, housing remains at safe working temperature
£93.95
Ergonomic and solid case, sliding “start – stop” button + push button to activate heating LED light 2200 mAh 3.7V rechargeable lithium-ion battery supply Also Includes: 3 x ¼-turn tips: Universal tip, fine-pointed tip and tip for heat-shrink sheath
•
•
•
•
•
Thermal protective Ø 1.0mm wire Micro-USB charging cable cap and circuit breaker Cleaning sponge Iron rest
Vibro-Impact® Air Hammer
• • • • • •
• • • • • • •
341300SP
Override Mode to start engine without any battery mounted Glow Plug Mode for cold start of diesel engine
LIFETIME CASE & 12 MONTH
Illuminated negative clamp
Expected Life Cycle : 10,000 cycles or 10 years
Pro Charge 12/24
£359.95
Built in shock absorber Low vibration for user comfort Includes: Ball Joint Separator Insert / Tie-Rod Separator Insert / 1/2” Square Drive Insert / Hammer Insert with Storage Bracket
£425.00
Reverse polarity protection Digital volt / charging level indicator
£329.00
A unique concept to aid the removal of seized suspension parts Controlled application of force via an air powered impact hammer
5KG
12v 1300 amp lightweight, compact & powerful UltraLithium Booster Pack with backup lithium battery Brand new market leading technology: Quickly jump start from a discharged booster pack Operating Temperature Range: -40°C +65°C
899040SP
90206000
Allows the operator to control and gradually increase the force being applied
Ultra-Lithium Battery Booster
ULTRA HARD DRILL BITS
25AMP 12 / 24V
LITHIUM BATTERY WARRANTY
25 amp electronic charger with digital display
•
Suitable for all types of lead batteries; Wet, Gel, AGM, MF, VRLA, etc. Specifications: Power Supply - 220 - 240V Frequency - 50-60H Rated Current - 5 - 12.5 - 25A Charging / Testing Stages - 9 Battery Voltage - 12 - 24V Capacity - 5Ah - 550Ah Show Room Function - 13.8V IP Rating - IP20 Size - 260 x 130 x 75mm Weight - 2.5Kg
• • • • • • • • • •
Mechanical Puller & Separator Kit - Panel
Hydraulic Internal Extractor, Puller & Separator Kit - Panel
• • •
08490500
19310500
• • • •
For removing bearings and gears where access behind components is too restricted to use standard pullers Slide Hammer with 7 split collet internal extractors Supplied with metal display panel
£829.95
Includes: 15000000 1 x Hydraulic Ram With Nose Piece
• • • • • • • • • • • •
£449.95 Makes 9 mechanical 2 or 3 leg pullers and 1 separator Supplied with metal display panel Thin jaws enable access where clearance behind component is limited Double ended legs for internal and external use
Includes:
19311200 1 x Twin Beam 08601400 2 x Legs 75mm - Thin Jaw 09500000 1 x Separator 10-55mm 09510000 1 x Separator 20-105mm 09311500 2 x Main Rods 09311900 4 x Extension Rods 09312300 2 x Extension Rods 5 inch 08542100 1 x Slide Hammer 6 x Split Collet Extractors 6.5 - 38mm (No. - 00, 0, 1, 2, 3, 4, 5) 09582000 1 x Adaptor 09400000 1 x Pulling Unit
Part No.
External Spread Min - Max mm
Internal Reach Min - Max mm
External Reach Max mm
19310500
10 - 105
6.5 - 38
876
• • • • • • • • • • • •
08271100 1 x Forcing Screw 08281100 1 x Forcing Screw 08271200 1 x Twin Head 08271300 1 x Triple Head 08281200 1 x Twin Beam 08281300 1 x Triple Beam 08271400 3 x Leg Assembly - Reversible 08281400 3 x Leg Assembly - Reversible 09500000 1 x Separator 10-55mm 08601400 2 x Leg 75mm - Thin Jaw 09301200 1 x Twin Beam 09301500 2 x Main Rod
02870000
Internal / External Circlip Tool Provides safe and stable service of extra large circlips
• • • •
Bent 72 degrees: 3mm, 3.8mm, 4.6mm
• • • •
£177.95
Packaged in black blow-molded case
NEW!
Mechanical Nut Splitters
55
£82.95
Improved nut placement and perpendicular chisel position allows for an easy nut split without damage to the thread Part no.
Nut Diameter
Thread
Max Torque
Dimensions
Price
03360500
4 - 17mm
Up to M10
38 Nm
M14 x 1.5 x 47mm
£49.95
03360600
8 - 24mm
M5 - M16
50 Nm
M14 x 1.5 x 47mm
£59.95
03360700
19 - 36mm
M12 - M24
190 Nm
M18 x 1.5 x 50mm
£89.95
£425.00
85MM TRAVEL Measurable 8 tonnes of pressure capacity 85mm of travel allows for reduced setting operations and saves time 4 x faster output operation than standard 1500 Series ram Removable handle can be rotated 360°
Compatible with the 1500 Series Puller Range where the 8 Tonne Hydraulic Ram is used
Supplied with 4 pairs of inter-changeable tips: 2.29mm / 3.00mm / 3.91mm / 4.32mm diameter
13115000
Forged Reversible jaws - can be used internally or externally
Reach mm
Min Spread for Ext Applications
Max Spread for Ext Applications
Min Spread for Int Applications
Max Spread for Int Applications
100mm
35mm
135mm
100mm
175mm
£79.95
Thread Restorers
• •
For repairing damaged threads where a conventional die cannot be used Provides eight pitch sizes of thread form Part no.
Thread Form
Pitch Sizes
01560000
BSW / BSF
11, 12, 14, 16, 18, 20, 22, 26
01560100
SAE / UNF
11, 12, 13, 14, 16, 18, 20, 24
01560200
METRIC
0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00
01560300
BSP
11, 12, 14, 16, 19, 20, 22, 28
6 - 16MM Dowel Pin Puller Set
•
Integrated pressure relief control valve opens at 8 tonnes and cannot be overloaded Oil hydraulics work in any position - even upside down Features piston with spring return
Universal Circlip Tool T-Bar handle with screw action for precise control Use for internal & external applications
Reversible Twin Leg Mechanical Puller
Features a flat upper piece instead of a rounded design to ensure that the nut does not rotate while splitting
8 Tonne Extra Travel Ram
• • • • • • • •
External Spread Max mm
140
70MM SPREAD
Tip kit contains durable alloy colour coded tips and hex key
150000XT
Reach Max mm
140
02830000
Compound screw lever for easy installation and removal of large circlips Tip Sizes: Bent 20 degrees: 3mm, 3.8mm, 4.6mm
• •
Spread Max mm
Circlip Tool With Peg Set
90MM SPREAD
• •
Part No. 08490500
•
£27.95
09600000
Design reduces possibility of damage to stud threads and Prevents shearing or damaging stud/ work piece by avoiding bottoming or shouldering studs 6 collet sizes; 6mm, 8mm, 10mm, 12mm, 14mm & 16mm
£169.95
Ford Injector Ecoblue Removal Set
GO434
£659.00
For the quick and safe removal of hubs, compact hubs and bearings without locking ring
•
Set of special tools to remove the injector on Ford vehicles
• • •
Provides removal of highly blocked injectors in a professional, safe and fast way Complete non-seized injectors can be removed using the fork and reused as required
Includes tools for extraction of injectors in single parts if broken Applications: Ford 2.0 ecoblue TDCI 2016-, Ford Galaxy, S-max, Mondeo, Focus C-Max, Transit and Custom 2018- etc.
•
Brake Pipe Flaring Tool Master Kit - Imperial & Metric
02700800
• •
£580.00
£369.00
All components available individually
• • •
07670000
Measures 200 - 400mm brake discs Provides access and reach through obstructions to give an accurate diameter measurement of the brake disc Easily order correct sized brake discs first time and eliminate the trial & error of ordering multiple sizes as shown on applications
£79.95 Diesel Injector Seat Cleaner Set
• • •
01750000
Helps to avoid blow-back due to poorly seated injectors
FlowStop Universal Flow Stop Kit is a reusable system to keep fluids in and dirt & dust out of maintenance systems; for a clean and safe workshop environment
Includes:
• • •
4 x Micro plugs - 1 - 10mm 4 x Standard plugs - 5 - 22mm 2 x XL Plugs - 13 - 42mm
• • • • • • •
CAPACITY
Suitable for gearboxes, automatic transmissions and DSGs as well as differential gears etc. The front & rear supports and arms, which can be adjusted in distance and tilt angle, provide a secure grip during application and removal
The support is applied to the gearbox which can be tilted forwards/ backwards and right/left, always ensuring a secure grip Includes adaptor for hydraulic gearbox lifter piston rod Ø30mm Specifications: Weight: 12 kg Assembly: Ø 40 mm Max. load bearing capacity: 150 kg Forwards/backwards tilt: ±35° Length/width: 490 mm/460 mm Left/right tilt: ±5°
• • •
NEW!
Stub Axle Lifter
GO366
Allows the suspension axle to be raised and lowered to the required position using a hydraulic jack The universal wheel hub holder is V-shaped and therefore can be fixed on the bolts of all hubs, designed to be coupled with the bolts that secure the wheels The kit includes the adaptors for hydraulic pit jacks piston rod Ø 25 and 30mm Specifications:
• •
£106.95
•
150KG
•
Set of 5 Diesel Injector Seat Cleaners, comes with centring pilot and T-Handle Clean injector seats when changing or reconditioning diesel injectors
FlowStop - Heavy Duty Universal Flow Stop Kit
£835.00
NEW!
GO925
Unique ‘Dial-a-Size’ Turret design Lever cam operation for quick flaring Automatic punch extraction from flare Screw clamp for accurate die alignment Variety of kits available to suit requirements
Brake Disc Measuring Tool
The tool can be easily assembled in different configurations according to the characteristics of the hub or hub and bearing to be removed The set includes ncludes 3 different pairs of support feet, a sturdy bar support and a spindle with bearing, all components capable of guaranteeing a high thrust force The set is an excellent addition to the GO015 wheel bearing extraction set
Gearbox & Automatic Transmission Support
‘270’ Series Brake Pipe Flaring Tool Kit SAE Single & Double Flares: 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single Flares: 4.75mm Bench Mounted Produces both Convex and Double Lap flares to SAE and DIN standards
• • • • • • • • • •
GO046
Hub Extractor Set
70300000 £39.95
• • • • • • •
UNIVERSAL
330 kg - Max Load FOR CARS & LCVS M16 - Max Thread Total length: 225 mm
Assembly: Ø40mm Tilt angle: ± 46 ° (forwards & backwards) Applications: Disassembly and assembly of the upright and the support joint or trapezoid of the suspension cross arm Load bearing test according to manufacturer specifications to highlight noise
£238.00
HGV Split Bush Kit - Master
18797000
£799.95
Universal wheel HUB extractor
For the removal and installation of split / spring eye bushes on HGV vehicles Uses a unique clamping system and a series of shells for a range of bush sizes from 56mm Dia to 75mm Dia. When used with a hydraulic pump (20017000) the kit allows the operator to work in a limited access environment and so reduce the amount of disassembly work required
• • •
21027500
HGV Hub Puller Kit
Comprehensive kit includes clamp assembly, 9 x shells - 56mm / 58mm / 60mm / 63mm / 65mm / 66mm / 68mm / 70mm / 75mm plus hydraulic components
• •
Variable for pitch circle diameter up to 445mm
£519.95
To suit wheel stud sizes commonly found on DAF, MAN, MERC, RENAULT, SCANIA & VOLVO models Contains 5 x thread adaptor pairs: M18 x P1.5 x 65mm/L M20 x P1.5 x 65mm/L M22 x P1.5 x 65mm/L
• • • • •
7/8” - 11 BSF 7/8” - 14 UNF
08799000
SAF Pivot Bush Tool SAF Pivot Bush Installation and Removal Tool
• • • •
For use on SAF Axle Pivot Eye Bush for “IU” or “IO” IDP Intradisc Plus & Integral Axles The 3D bush is an integral component that is pressed into the suspension arm to absorb wheel, side tilt and braking forces for greatly increased handling and stability
£579.00
Mercedes-Benz Vito Rear Gen 2 Bearing Kit
08122500
ON VEHICLE SOLUTION
£379.95
• • • • •
Mercedes-Benz Vito W639 model specific Accommodates the larger 92mm bearing, which is required for this application Can be completed without the removal of the ABS sensor which can otherwise become damaged in the removal process Includes a large finely threaded spindle which eliminates the need for hydraulics whilst helping the bearing alignment for installation Manufacturer’s Bearing Reference: 713667980
Applications: Viano (W639) 2003 onwards
• • •
OEM References: OE-6393340006
Vito Mixto (W639) 2003 onwards Vito Minibus (W639) 2003 onwards
• • •
OE-639 981 04 27 S1 OE-A6399810427
• • •
OE-6399810427 OE-A6393340006
Inner Bearing Replacement Kit - XL
• • • • •
OE-A6399810427S1
XL Cooling System Pressure Test Kit
331400V2 Includes:
•
High capacity metal bodied hand pump
Additional Pressure Caps available - refer to applications guide
• • Applications Include: Bova, Case, Caterpillar, County, DAF, Dart, David Brown, Denis, Deutz-Fahr, ERF, Fendt, Ford, Iveco, JCB, John Deere, Komatsu, Leyland Marshall, MAN, Massey Ferguson, MercedesBenz, Neoplan, New Holland, Optare, Renault, Scania, Volvo construction and agricultural vehicles
£1149.00
Universally applicable to cars and vans as well as for bearing rings in general (e.g. gears etc.)
231009SP
Ø60 80MM
£1245.00
Capable of multiple starts of over 28L diesel engines - Suitable for hauliers, plant, CV & PSV workshops and many others who need to rely on their booster pack this winter Features portable wheeled design to easily move the pack around your workshop without worrying about injury 2000/1000 Cranking Amps – enough to start 28L diesel engines from completely flat Curved clamps with LED in negative clamp
S
Quick-Connect Hose Assembly Dual Gauge measures both p.s.i (0-35) and bar (0-2.5)
To remove the bearing inner rings which usually remain on the wheel hub when changing the wheel bearings New design for large bearing rings, which can’t be removed with the kit GO020 Unique gripper principle is effective even when the bearing ring is flush with the hub The bearing ring is held firmly on the entire circumference and removed without tilting
AFET
FI
Y
•
10 x Reservoir & Radiator Pressure Caps
GO025
CT Pro Booster 2000/1000A
•
£309.95
• • • •
4.177.3028.00 3D pivot bush
Easily remove and install SAF pivot bushes with the aid of an impact wrench No separate tool needed for removal of the old bushes
ARRANTY TWO YEAR W
RST
PORTABLE DESIGN
LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY* *See Website for Terms & Conditions
Rail Type Pit Bridge with Handrail
51060500 £699.00
Safety pit bridge suitable for pits with rail guides
Specifications: Adjustable Width - 870 - 1150mm
• • • • •
• •
Loading Capacity 400kg Weight - 45kg (less handrails)
• • •
Non-slip grating Adjustable width suits nearly all pit distances
21200000
Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied
Jaw Throat Width: 36mm Jaw Throat Depth: 50mm
Unbreakable Vice Fixed Base
20880000
Proven solution for seized / fused inner wheels Safe and secure way to remove the wheel No damage to hub or wheel studs Pulls inner and outer wheels on twin or single wheel hubs, designed specifically for 10 stud 22.5” HGV wheels Suitable for steel wheels, optional soft coated hook set available for alloy wheels (available to purchase separately)
MODELS AVAILABLE
£2849.95 S
Particularly useful for removal of HGV suspension King Pins Includes 5 extractor (pushing) pins for those hard to reach applications Auto-Grip collar and adaptor for quick change of pins Supplied in steel storage case
AFET
FI
Y
•
£159.95
4”, 6” & 8”
20T Hydraulic Cylinder and Pump Stand alone portable press frame kit for pin pushing applications
HGV Hydraulic Wheel Puller
• • • •
08070000
Can be upgraded to hydraulic power (use 08075000 Upgrade Kit) Specifications: Jaw Opening: 70mm
20 Tonne Loadstar “Plus” Press Frame - Complete Kit
• • • •• • •
Ball Joint Separator - HGV
RST
12 TONNE
£2995.00
High quality, heavy duty construction provides years of trouble free use CNC machined components for excellent fit and durability Hardened and tempered finely ground jaws for superior grip Scratch resistant hammered blue finish
Size
Price
53320400
4”
£68.95
53320600
6”
£109.95
53320800
8”
£159.95
*Excluding Jaws & Handle - consumables available to purchase separately
Oil Extractor with Under-Vehicle Tray
53380400
• • •
120L
Pneumatic equipment for fast recovery of engine oil from any vehicle Carbon Steel Reservoir Epoxy Coated Finish
£849.00
Pneumatic Extraction Drain plug for cleaning and internal inspection Metal drip tray with drain filter grid Includes 6 probes
Specifications:
53438000
Part no.
GUARANTEED UNBREAKABLE*
• • • • • • •
TROLLEY INCLUDED
10 Tonne Air Hydraulic Trolley Jack
• • • •
Tray - 51l Air Inlet Connection - 1/4” Air Consumption - 200 l/min
• • • •
Noise level - <80 (dB) Weight - 83kg Reservoir Operating Pressure - 4 bar Capacity - 120l
DUAL POSITION TRAY Motorq Heavy Duty Split Torque Wrench
80250000 £529.00
70MM EXTENSION
£1599.00 PLUS DELIVERY
• • • • • •
Air hydraulic jack. Silent air pump. Less than 70 dB Rubber coated, ergonomically designed handle for operator comfort Safety lowering control valve for safe lowering even under maximum load Silent wheels and easy manoeuvring Min. height 150 mm Long reach chassis improves access to lifting points deep under vehicles
300 - 1000 NM Split Torque Design - The new generation design can be split into two parts for easy and economic storage and shipping Specifications:
• • • • •
3/4” push thru sq dr Length: 1554mm Supplied in blow moulded box 300 - 1000 N.m / 200 - 750 lbf.ft Weight: 7.9kg
www.sykes-pickavant.com 01543 679900 Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 31ST MAY 2022 - REF: SP122GBP COPYRIGHT 2022 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED
Distributor Stamp: