industrial brochure
JULY - OCTOBER 2021
Specialist Tool Solutions
new Self-Centring Pullers new
New Mechanical Pullers 2 Jaw Mechanical Pullers
The jaws are connected by a self-centring mechanism for simultaneous movement, improving the placement of the puller on the work piece if in an unsuitable position. The device has safety in mind by preventing the jaws opening past the recommended opening distance. When a puller is opened beyond this distance, the work piece may be released or the puller could become broken.
•• • •
REVERSIBLE JAWS FOR INTERNAL & EXTERNAL PULLING
•
2 Jaw Mechanical Pullers with forged jaws PART NO.
EXTERNAL PULLING MIN - MAX
REACH
INTERNAL PULLING - MIN - MAX
WIDTH
TONNE
WEIGHT
External 2/3 jaw puller Forged jaws Self-centring closure system Jaw opening limiting safety feature
LIST PRICE
PART NO.
REACH
SPREAD
TONNE
WEIGHT
LIST PRICE
105mm
110mm
1T
1kg
£139.00
13110000
100mm
30 - 95mm
92 - 130mm
134mm
3T
1.1kg
£73.53
13010000
13115000
100mm
35 - 135mm
100 - 175mm
176mm
3T
1.3kg
£76.75
13040000
185mm
175mm
4T
2.5kg
£169.00
225mm
240mm
7T
6.5kg
£249.00
13120000
150mm
40 - 165mm
130 - 225mm
223mm
7T
3.3kg
£118.75
13070000
13125000
155mm
35 - 190mm
135 - 250mm
250mm
7T
3.4kg
£123.75
13100000
410mm
360mm
10T
14.5kg
£469.00
13130000
205mm
50 - 240mm
175 - 325mm
325mm
12T
7.5kg
£194.05
13105000
490mm
405mm
10T
16kg
£519.00
Industrial Extraction & Installation Solutions
new new
Bearing Installation Kits
• • • •
FOR USE WITH A SOFT HAMMER
Suitable for use on bearings, bushes and nylon seals etc. with various types of profile Features Ø25mm / Ø38mm / Ø60mm mounting tube Includes a range of aluminium adaptors for full face support, preventing damage and premature failure Supplied in foam & plastic case
•
For the extraction of tapped dowels from their location holes Kit includes Slide Hammer & Adaptors PART NO.
COVERAGE
PRICE
09590000
M4 - M10
£149.00
09595000
M6 - M20
£239.00
Coverage for larger bearings found on engines, gearboxes and industrial machinery
PART NO.
COVERAGE
PRICE
09580600
57 - 75mm
£295.00
09580700
74 - 100mm
£345.00
09580800
57 - 100mm
£419.00
Bearing Extractors Compatible with kits above and slide hammers with M16 x 2mm fittings
PART NO.
COVERAGE
PRICE
09660000
26 – 47mm
£189.00
PART NO.
COVERAGE
PRICE
09660100
42 – 72mm
£219.00
09582100
57 - 75mm
£159.00
09660200
62 – 100mm
£419.00
09582200
74 - 100mm
£195.00
Threaded Stud Extractors
•
Bearing Extractor Kits
new
Hydraulic Puller & Separator Kit
• • • • • •
15520000
Makes 4 different twin/triple leg pullers, plus bearing separator kit Supplied in metal case Puller Spread Min - Max: 50-150mm Puller Reach Max: 150mm External Spread Min - Max: 20-105mm External Reach Max: 876mm
£429.95
Multipull® Blind Housing Bearing Remover Kit
1500 Series 8 Tonne Hydraulic Ram
• • • • •
150000V2 £94.50
New Design includes pre-loading 30mm hex, 2” extension and foam cut out for storage Standard power unit for SP hydraulic pulling options and can also be used with many alternative SP puller applications e.g. 3 leg pullers, ball joint pullers, hub pullers, suspension bush removers etc. Can achieve up to 4 tonnes of mechanical force prior to hydraulic operation Diameter - 1 1/2” Thread - 16tpi Whitworth
1800 Series 12 Tonne Hydraulic Ram
• • • • •
• • • • • • • • •
Diameter - 1 1/2” Thread - 16tpi Whitworth
• • •
REVERSIBLE LEGS
Reach: 295 - 340mm
• • • •
Min Spread: 20mm Max Spread: 95mm Adaptor Dia.: 5.5-8mm Puller Reach: 125mm
Suitable for use with air tools
02870000
2 and 3 way options 360 degree swivel hose coupling for optimum access
• • •
In-built safety valve to prevent overloading 12T Hydraulic Ram and Pump Puller supplied in sturdy plastic storage case
9MM - 90MM SPREAD
£174.95
• • •
08540300
3 straight legs, 3 cranked reversible legs for internal and external pulling 4 split collet internal extractors Adjustable cone ensures positive location, minimising risk of slippage Cranked Leg Style
• • •
External Spread External Spread Min - Max: 66-105mm Min - Max: 66-105mm Internal Spread Internal Spread Min - Max: 23-83mm Min - Max: 23-70mm External Reach Max: 75mm
Use 1 or 2
Setting Sleeves
• •
External Reach Max: 65mm
Internal Spread Min - Max: 10-30mm Thread size - ½” x 20 UNF
20101200
£1099.95
20 Tonne Loadstar “Plus” Press Frame Complete Kit
212050V2 SPECIAL VERSION FOR OPTARE BUSES
•
• • •
Pump supplied in steel storage case Spread 485mm Reach 305mm
£329.00
LARGER SIZES ALSO AVAILABLE
Lightweight aluminium hydraulic pump included Selection of ram extension rods supplied to increase stroke
new
Slide Hammer Puller Kit - Combi Pull & Split Collets Extractor
Self centring self locking puller legs i.e. grip increases as load increases Easy one man operation
£127.95
Split Collets
Spread: 0mm 400mm
Loadstar Puller 12 Tonne
• • • • •
Supplied in blow moulded case with foam
Straight Leg Style
Includes two pairs of setting sleeves for equal pulling length Internal / external reversible legs - can also be used for internal applications
3 kits cover a wide range of ISO bearings. (To identify kit for bearings without an ISO reference, refer to puller spread and adaptor diameter)
• • • •
Can achieve up to 4 tonnes of mechanical force prior to hydraulic operation
N.B. Due to the thread being the same as the 1500 series ram it can be used with our hydraulic puller range but all of the components in that range are rated at 10T and so if you chose to use this ram it is at your own risk and Sykes-Pickavant cannot be held responsible for any accidents or component damage
• •
Stabilisers reduce sideways movement and self-centre the puller
Provides safe and stable service of extra large circlips Compound screw lever for easy installation and removal of large circlips Tip Sizes: Bent 20 degrees: 3mm, 3.8mm, 4.6mm Bent 72 degrees: 3mm, 3.8mm, 4.6mm Tip kit contains durable alloy colour coded tips and hex key Packaged in black blow-molded case
Standard power unit for SP suspension products and is 50% more powerful than the original SP1500 Series 8 tonne ram, creating reliable power for tough applications
£425.00
Positive seating allows even tension on inner and outer bearing rings, reducing resistance
• •
New Design includes pre-loading 30mm hex, 2” extension and foam cut out for storage
17700000
These special pullers will remove blind housing bearings without the need to dismantle machinery or remove the running shaft
Internal / External Circlip Tool
180000V2 £119.95
Large Universal Internal / External Puller
09800000
• • • • • •
Includes additional pins for use with ‘Optare’ Buses 2011- fitted with albion axles (Pin Ref: R1800058) 20T Hydraulic Cylinder and Pump Stand alone portable press frame kit for pin pushing applications Particularly useful for removal of HGV suspension King Pins Includes x 7 extractor (pushing) pins for those hard to reach applications Auto-Grip collar and adaptor for quick change of pins Supplied in steel storage case
£2595.00
Unbreakable Vice - Fixed Base
PART NO.
PRICE
4”, 6” & 8”
SIZE (INCH)
53320400
4”
£64.50
MODELS AVAILABLE
53320600
6”
£106.95
*Excluding jaws & handle - replacements available
53320800
8”
£149.75
GUARANTEED
UNBREAKABLE*
new Magnetic Jaws PART NO.
TYPE
SIZE
53341000
Polyurethane Cross Serrated
100mm
53341500
Polyurethane Cross Serrated
150mm
53351000
Polyurethane Grooved
100mm
53351500
Polyurethane Grooved
150mm
53301000
Neutral
100mm
PRICE
PART NO.
TYPE
CNC machined components for excellent fit and durability Hardened and tempered finely ground jaws for superior grip Scratch resistant hammered blue finish
£26.90
53331500
£30.90
53331800
£26.90 £30.30
PRICE
Prism / Vee Pipe
150mm
£32.90
Prism / Vee Pipe
180mm
£33.90
53321000
Fibre Covered
100mm
£26.90
53321500
Fibre Covered
150mm
£30.90
£24.40
53321800
Fibre Covered
180mm
£30.90
Neutral
Prism / Vee Pipe
Fibre
Rubber
53301500
Neutral
150mm
£26.90
53311000
Rubber Covered
100mm
£26.90
53301800
Neutral
180mm
£28.90
53311500
Rubber Covered
150mm
£30.90
53331000
Prism / Vee Pipe
100mm
£29.90
53318000
Rubber Covered
180mm
£30.90
01800000
Screw Extractor Set
For repairing damaged threads where a conventional die cannot be used Provides eight pitch sizes of thread form
PART NO.
THREAD FORM
PITCH SIZES
PRICE
01560000
BSW / BSF
11, 12, 14, 16, 18, 20, 22, 26
£25.95
01560100
SAE / UNF
11, 12, 13, 14, 16, 18, 20, 24
£25.95
01560200
METRIC
0.75, 1, 1, 1.50, 1.75, 2, 2.50, 3
£25.95
01560300
BSP
11, 12, 14, 16, 19, 20, 22, 28
£25.95
960400SP
Straight Fluted Extractor Set
• •
£103.95
For the removal of broken studs 6 - 12mm diameter
Broken stud is drilled & an extractor is used to remove the remains of the stud
Contains: 5 x Drill Bits, 10 x Drill Guides & 5 x Extractor Assemblies
Hydraulic Nut Splitters
• •
Removes seized nuts without damaging threads Allen key hex drive
031600V2
033600V2
£199.95 37MM NUT CAPACITY
Universal FlowStop Range FlowStop Universal Flow Stop Kit is a reusable system to keep fluids in and dirt & dust out of maintenance systems; maintaining a clean and safe workshop environment
• • •
Angled design with trigger Coil Twist Lock™
The rubber material is silicone free and highly resistant to many chemicals, acids and other aggressive fluids Suitable for non-pressurised systems only Temperature Range: -25°C to +90°C
Ideal for use on Hydraulic Hoses, Liquid Lines & Cooling Systems
Includes:
£23.95
70200000
Fault override delay TWO YEAR WARRA
NTY
1 Kilowatt Input 1 Kilowatt Output
Industrial ‘Motorq’ Torque Wrenches
• •
6 x Micro plugs - 1 - 10mm 4 x Standard plugs - 5 - 22mm
70300000
Includes:
• • •
The New Generation Industrial ‘Motorq’ Torque Wrench can be split into two parts for easy and economic storage and transportation and are supplied in a blow-moulded case
NO TOOLS REQUIRED
FlowStop Kits
LED usage indicator
Fan operation enhancements
Grooved
Aluminium
22MM NUT CAPACITY
Generates ‘Invisible Heat’ to release corroded and thread locked metal components without the danger of an open flame
User controlled LED light switch
Cross Serated
£99.95
£695.00
INCLUDES 11 COILS
Polyurethane
SIZE
Induction Heater Deluxe Kit
• • • • • •
High quality, heavy duty construction provides years of trouble free use
Universal jaws for use with any vice with the corresponding jaw size
Thread Restorers
• •
• • • •
£38.95
4 x Micro plugs - 1 - 10mm 4 x Standard plugs - 5 - 22mm 2 x XL Plugs - 13 - 42mm
XL Individual Flowstops Ideal for Large Heavy Duty Applications Including HGV Hoses
70400000
£41.95 PART NO.
MODEL
SQUARE DRIVE
80240000
‘Motorq’ 400
CALIBRATED RANGE
LENGTH (MM)
WEIGHT (KG)
LIST PRICE
150 - 600
1319
7.3
£479.00
N·M
LBF·FT
3/4” push thru
200 - 800
80250000
‘Motorq’ 500
3/4” push thru
300 - 1000
200 - 750
1554
7.9
£489.00
80250500
‘Motorq’ 500
Stepped 3/4” To 1”
300 - 1000
200 - 750
1554
7.9
£495.00
35 - 80MM
70500000
£59.95 60 - 130MM
Standard 330ml can shown for scale purposes
15T, 20T, 30T & 50T RATED MODELS AVAILABLE
‘Silver Series’ Hydraulic Workshop Presses
• • • •
Range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm return system & V blocks
N.B. A standard delivery charge of £49 will apply within the UK with extra charges applicable for delivery outside of the UK. Contact Customer Services for further details.
Manufactured in the EU Two speed pump
• • • • • • •
HAND/FOOT OPERATED ELECTRO-HYDRAULIC
60 - 100 TONNE Range of heavy-duty presses rated from 60 - 100 tonne featuring:
ANT Y AR WARR Three YE
Moveable cylinder
• • • •
Fully adjustable horizontal ram movement Piston over-travel limit stop Delivered ready for use
HEIGHT (MM)
RATING
WIDTH (MM)
DEPTH (MM)
BED DEPTH (MM)
Winch for table*
WEIGHT (KG)
PRICE
53436000
15T
1930
920
650
170
85 - 950
150
£689.00
53436200
20T
2030
940
650
180
65 - 1030
165
£810.00
53436400
30T
2060
1120
650
200
115 - 1020
230
£1250.00
53436500
50T
2290
1220
650
210
70 - 1065
370
£1975.00
Electro-Hyrdraulic Workshop Presses
Air assisted dual operation via foot pump or pump handle Air connection fitted with water separator Fast and safe adjustment of the press table height, using a braked winch Wide insertion width 300mm stroke Fast air return Pressure gauge
• • •
Two V-blocks Hard chrome piston Movable cylinder
• • • • • •
90° hinged pump unit enables easier insertion of longer work-pieces Multi-adjustable pressure valve Fast and safe adjustment of the press table height, using a braked winch Wide insertion width 300mm stroke Pressure gauge
• • •
Two V-blocks Hard Chrome Piston Movable cylinder
PART NO.
OPERATION
RATING
WORKING AREA HXW
ACTING CYLINDER
PRICE
53416000
Hand/Foot
60T
760 x 1005mm
N/A
£3299.00
53417000
Hand/Foot
70T
760 x 1005mm
N/A
£3399.00
53411000
Hand/Foot
100T
915 x 1035mm
N/A
£4499.00
53426000
Electro-Hydraulic
60T
760 x 1000mm
Single
£4299.00
53426600
Electro-Hydraulic
70T
730 x 1005mm
Double
£4799.00
53421000
Electro-Hydraulic
100T
915 x 1035mm
Double
£6499.00
Single Acting Cylinder: One-way pressing action for where heavy tooling is not to be mounted on the piston
N.B. Delivery details available on request from Customer Services on 01543 679900 or sales@sykes-pickavant.com
15530500
15510500
•
£484.50
•
V blocks
RANGE
Comprehensive Hydraulic Puller / Separator / Extractor Kit
Hydraulic Twin / Triple Leg Puller Kit
Overload safety valve
*For models 53436400 & 53436500
Double Acting Cylinder: Featuring both pressing and pulling facilities, flange supplied for fitting of tooling
Hard chrome piston with 300mm of stroke
• • •
Pressure gauge
Hand / Foot Operated Workshop Presses
Heavy Duty Workshop Presses
• • •
Automatic arm return
PART NO.
PEDAL KIT AVAILABLE
Fast and safe adjustment of the press table height
Heavy duty steel frame
Makes 8 different twin/triple leg pullers
• SEE WEBSITE FOR
MORE OPTIONS Standard Leg
£1199.00 Combines p/n 15510500 and 19310500 to make the most comprehensive set of pulling, separating and extracting options available Ideal workshop set for applications where a wide variety of pulling and extracting problems are likely to be encountered on a daily basis
Standard Leg
KIT CONTENTS
KIT CONTENTS
Part No.
Puller Spread Min - Max mm
Puller Reach Max mm
Ram Extension mm
Part No.
Puller Spread Min - Max mm
Puller Reach Max mm
Ram Extension mm
External Spread Min - Max mm
Internal Reach Min - Max mm
External Reach Max mm
15510500
50 - 250
250
50 / 100 / 150
15530500
50 - 250
250
50 / 100 / 150
10 - 105
6.5 - 38
876
www.sykes-pickavant.com 01543 679900 Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 31ST OCTOBER 2021 - REF: SP221GBP COPYRIGHT 2021 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED
Distributor Stamp: