Phototriac Coupler (APT12❍❍W) VDE
Please contact us about VDE certified products.
Phototriac Coupler Wide Terminal Type (IEC compliant reinforced insulation)
Phototriac Coupler (APT12❍❍W)
FEATURES
1
2
ZC Zero-cross circuit
4 1
4
3 2
3
1
6 1
2
2
3
ZC Zero-cross circuit
6
4 3
4
1. Distance between input and output terminals is 10.16 mm .400 inch. (IEC335 standard of min. 8 mm .315 inch maintained.) 2. Only ours handles both 100 and 200 V AC loads This relay handles both voltages in a single product it is not necessary for users that use both types to manage separate part numbers. 3. I/O isolation resistance of 5,000 V AC realized! 4. Two types available: Zero-cross type and Non zero-cross type 5. Two package design available: DIP type and SMD type
6. Pin No. 5 is completely molded for high resistance against extraneous noise.
TYPICAL APPLICATIONS 1. Triac driver for SSRs 2. Heater control for copiers and other products 3. Industrial equipment such as NC machines, chip mounters, Robotics and so on 4. Control of heated-water motors and ush v alve for personal hygiene systems 5. AC fan-motor controls of air conditioner
TYPES Output rating* Type
Part No.
Repetitive ON-state peak RMS OFF-state current voltage
Package size
Type
Through hole terminal
Surface-mount terminal
Tube packing style
Tape and reel packing style
APT1211WAY APT1211W APT1211WA (Picked from the 1/4-pin side) DIP4pin APT1221WAY Non APT1221W APT1221WA (Picked from the zero-cross 1/4-pin side) APT1212WAY Zero-cross APT1212W APT1212WA (Picked from the 1/6-pin side) DIP6pin APT1222WAY Non APT1222W APT1222WA (Picked from the zero-cross 1/6-pin side) Zero-cross
AC type
600 V
100 mA
Packing quantity
Tube
APT1211WAW (Picked from the [DIP4pin] 2/3-pin side) 1 tube contains APT1221WAW 100 pcs. (Picked from the 1 batch contains 2/3-pin side) 1,000 pcs. [DIP6pin] APT1212WAW (Picked from the 1 tube contains 50 pcs. 3/4-pin side) APT1222WAW 1 batch contains 500 pcs. (Picked from the 3/4-pin side)
Tape and reel
[DIP4pin] [DIP6pin] 1,000 pcs.
Note: For space reasons the initial letters “APT” of the product number for the DIP 4-pin type, the letter “WA”, which indicates the SMD terminal shape for the DIP 4-pin and 6-pin types, and the package type indications “Y” and “W” have been omitted from the product label. (Example: The label for product number APT1221WAY is 1221.) * Repetitive peak OFF-state voltage and surge on current express the peak AC.
RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current Input LED reverse voltage Peak forward current Repetitive peak OFF-state voltage Output ON-state RMS current* Non-repetitive surge current Total power dissipation I/O isolation voltage Temperature limits
Symbol APT1211W(A) APT1221W(A) APT1212W(A) APT1222W(A) Remarks IF 50 mA VR 6V IFP 1A f = 100 Hz, Duty Ratio = 0.1% VDRM
600 V
IT(RMS) ITSM PT Viso
0.1 A 1.2 A 500 mW 5,000 V AC
Operating
Topr
–40°C to +100°C –40°F to +212°F
Storage
Tstg
–40°C to +125°C –40°F to +257°F
* Do not exceed 50 mA of ON state RMS current in case of following load voltage condition. APT1211W, APT1221W: more than 100 V AC; APT1212W, APT1222W: more than 120 V AC
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AC In one cycle at 60Hz
Non-condensing at low temperatures
Phototriac Coupler (APT12❍❍W) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item
Symbol
Typical LED dropout voltage Maximum Typical LED reverse current Maximum Typical Peak OFF-state current Maximum Typical Peak On-state voltage Maximum Typical Holding current Maximum Critical rate of rise of Minimum OFF-state voltage
Input
Output
Transfer characteristics
VF IR IDRM VTM IH
APT1211W(A), APT1212W(A) APT1221W(A), APT1222W(A) 1.18 V 1.3 V — 10 µA — 1 µA 1.3 V 2.5 V 0.3 mA 3.5 mA
dv/dt
500 V/µs
Trigger LED current* Maximum
IFT
10 mA
Zero-cross voltage** Maximum
VZC
Turn on time***
Maximum
TON
100 µs
I/O capacitance
Maximum
Ciso
1.5 pF
I/O resistance
Minimum
Riso
50 GΩ
50 V
Condition IF = 10 mA VR = 6 V IF = 0 mA VDRM = 600 V IF = 10 mA ITM = 0.05 A
VDRM = 600 V ×1/M2 VD = 6 V RL = 100 Ω IF = 10 mA IF = 20 mA VD = 6 V RL = 100 Ω f = 1 MHz VB = 0 500 V DC
—
*Recommended LED current IF = 20mA **Applicable part numbers: APT1211W and APT1212W. ***Turn on time
Input
90% Output Ton
DIMENSIONS
mm inch PC board pattern (BOTTOM VIEW)
Max. 10° 6.4 ±0.05 .252±.002
10.16±0.5 .400±.020
4-0.8 dia. 4-.031 dia.
2.54 .100
Max. 10° 2.7±0.05 .106±.002
4.78 ±0.05 1.88 ±.002
6.4 .252
10.16 .400
0.2 .008 0.33 .013
3.0 .118
2.54 .100
0.47 .019 0.47 .019 1.0 .039
Tolerance: ±0.1 ±.004 2.54 .100
Terminal thickness: 0.25 .010 General tolerance: ±0.1 ±.004
Max. 10°
Recommended mounting pad (TOP VIEW)
Max. 12.0 10.16±0.5 Max. .472 .400±.020
6.4 ±0.05 .252±.002
4.78±0.05 .188±.002
2.7±0.05 .106±.002
10.8 .425
0.75 .030
±0.2
0.2 .008±.008 2.54 .100
Terminal thickness: 0.25 .010 General tolerance: ±0.1 ±.004
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
1.9 .075
1.5 .059
2.54 .100
Tolerance: ±0.1 ±.004
Phototriac Coupler (APT12❍❍W) mm inch PC board pattern (BOTTOM VIEW)
MAX. 10° 6.4±0.05 .252±.002
10.16±0.5 .400±.020
5-0.8 dia. 5-.031 dia.
5.08 .200 2.54 .100
MAX. 10° 3.4 .134
8.8±0.05 .346±.002
6.4 .252
2.54 .100
3.0 .118
10.16 .400
Tolerance: ±0.1 ±.004 0.47 0.47 0.47 .019 .019 .019 1.25 1.25 .049 1.25 .049 .049 2.54 2.54 .100 .100
Terminal thickness: 0.25 .010 General tolerance: ±0.1 ±.004 Recommended mounting pad (TOP VIEW)
Max. 10°
6.4±0.05 .252±.002
Max. 12.0 10.16±0.5 Max. .472 .400±.020
10.8 .425 0.75 .030 3.4 .134
8.8±0.05 .346±.002
1.9 .075
1.5 .059
2.54 2.54 .100 .100
Tolerance: ±0.1 ±.004 3.4 .134 0.2±0.2 .008±.008 0.47 .019 1.25 .049
0.47 .019 1.25 .049 2.54 2.54 .100 .100
0.47 .019 1.25 .049
Terminal thickness: 0.25 .010 General tolerance: ±0.1 ±.004
SCHEMATIC AND WIRING DIAGRAMS Notes: E1: Power source at input side; IF: Trigger LED forward current; VL: Load voltage; IL: Load current; Output con gur ation
Schematic
1
2
Load
Wiring diagram
4
ZC Zero-cross circuit
3
1
4
2
3
4
External Triac
E1 IF
1
4
2
3
1
6
IL
VL (AC)
IL
External Triac
1a
AC
2 3
ZC Zero-cross circuit
1
4 E1
IF
6
6
6
3
3
VL (AC)
4
IL 4
External Triac
2
External Triac
2 IL
1
VL (AC)
3
4
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
VL (AC)
Phototriac Coupler (APT12❍❍W) REFERENCE DATA
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.