Signal Relays by SYNsCON

DS HIGHLY SENSITIVE 1500 V FCC SURGE WITHSTANDING MINIATURE RELAY FEATURES

9.9 .390

35.24 1.387

9.8 .386

9.9 .390

20 .787

9.8 .386 15 .590

DS4E

DS RELAYS

9.9 .390 9.8 .386

DS2E DS1E

mm inch

• High sensitivity: 200 mW pick-up power 100 mW pick-up power types available • Latching types available • High switching capacity: 60 W, 125 V A • High breakdown voltage: 1,500 V FCC surge between open contacts 1,000 V AC between open contacts • DIP-1C type can be used with 14 pin IC socket 2C type can be used with 16 pin IC socket, 4C type can be used with 2 sets of 14 pin IC sockets • Gold-cap silver palladium types available for 2 Form C type • Bifurcated contacts are standard

SPECIFICATIONS Contact

Characteristics (at 20°C 68°F)

Arrangement 1 Form C, 2 Form C, 4 Form C Initial contact resistance, max. 50 mΩ (By voltage drop 6 V DC 1 A) Contact material Gold-clad silver Max. switching power 60 W, 125 VA Max. switching voltage 220 V DC, 250 V AC Rating (resistive) Max. switching current 2 A DC, AC Max. carrying current 3 A DC, AC Mechanical 108 Expected (at 600 cpm) (1 Form C 2 coil latching type: 107) life (min. operations) Electrical 5×105 2 A 30 VDC resistive * Gold capped silver-palladium contact also available for 2 Form C 10 operations at 0.1 A 50 V DC resistive 7

Coil (polarized) (at 20°C 68°F) Single side stable

Minimum operating power

Approx. 200 mW

Nominal operating power

Approx. 400 mW

M 1 coil Minimum set and reset power type latching Nominal set and reset power Minimum set and reset power 2 coil latching Nominal set and reset power Single Minimum operating power side Nominal operating power stable S 1 coil Minimum set and reset power type latching Nominal set and reset power Minimum set and reset power 2 coil latching Nominal set and reset power

Approx. 90 mW Approx. 180 mW Approx. 180 mW Approx. 360 mW Approx. 100 mW (128 mW)* Approx. 200 mW Approx. 45 mW (58 mW)* Approx. 90 mW Approx. 90 mW (115 mW)* Approx. 180 mW

Max. operating speed Initial insulation resistance*1 Type of relay Initial Between open contacts breakdown Between contacts sets voltage*2 Between contacts and coil FCC surge voltage between contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Set time*3 (at nominal voltage) Reset time*3 (at nominal voltage) Temperature rise (at nominal voltage, Contact current: 2A) Shock resistance

Functional*4 Destructive*5 Functional*6

Vibration resistance Destructive Conditions for operation, Ambient temp. transport and storage*7 (Not freezing and condensHumidity ing at low temperature)

Unit weight

* For 1 Form C high sensitive types.

1 Form C 2 Form C 4 Form C

20 cpm at rated load 50 cps at low level load Min. 100 MΩ (at 500 V DC) (DS1-S type) (Other types) 500 Vrms 1,000 Vrms — 1,000 Vrms 1,000 Vrms 1,500 Vrms 1,500 V (Expect DS1-S type) Approx. 3 ms Approx. 2 ms Approx. 3 ms Approx. 3 ms Max. 65°C 1C, 2C:Min. 490 m/s2 {50 G} 4C:Min. 294 m/s2 {30 G} Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm –40°C to +70°C –40°F to +158°F 5 to 85% R.H. Approx. 3.2g .11oz Approx. 4g .14oz Approx. 7g .25oz

Remarks FCC (Federal Communication Commission) requests following standard as Breakdown Voltage specification.

1500V 750V

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10 mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

10 µs 160 µs

DS TYPICAL APPLICATIONS

ORDERING INFORMATION

• Telecommunication equipment • Office equipment • Computer peripherals • Security equipment • Measuring instrumentation

Ex DS Contact arrangement 1: 1 Form C 2: 2 Form C 4: 4 Form C

Classification of type E: Amber sealed type

Sensitivity M: 400 mW nominal operating power S: 200 mW nominal operating power

DC 48 V

Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching

Coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V

*Reverse polarity types available (add suffix-R). Standard packing: Carton: 50 pcs.; Case: 500 pcs.

TYPES Single side stable Nominal Voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48

M (400 mW) type

S (200 mW) type

1 Form C DS1E-M-DC1.5V DS1E-M-DC3V DS1E-M-DC5V DS1E-M-DC6V DS1E-M-DC9V DS1E-M-DC12V DS1E-M-DC24V DS1E-M-DC48V DS1E-S-DC1.5V DS1E-S-DC3V DS1E-S-DC5V DS1E-S-DC6V DS1E-S-DC9V DS1E-S-DC12V DS1E-S-DC24V DS1E-S-DC48V

Part No. 2 Form C DS2E-M-DC1.5V DS2E-M-DC3V DS2E-M-DC5V DS2E-M-DC6V DS2E-M-DC9V DS2E-M-DC12V DS2E-M-DC24V DS2E-M-DC48V DS2E-S-DC1.5V DS2E-S-DC3V DS2E-S-DC5V DS2E-S-DC6V DS2E-S-DC9V DS2E-S-DC12V DS2E-S-DC24V DS2E-S-DC48V

4 Form C DS4E-M-DC1.5V DS4E-M-DC3V DS4E-M-DC5V DS4E-M-DC6V DS4E-M-DC9V DS4E-M-DC12V DS4E-M-DC24V DS4E-M-DC48V DS4E-S-DC1.5V DS4E-S-DC3V DS4E-S-DC5V DS4E-S-DC6V DS4E-S-DC9V DS4E-S-DC12V DS4E-S-DC24V DS4E-S-DC48V

1 Form C DS1E-ML-DC1.5V DS1E-ML-DC3V DS1E-ML-DC5V DS1E-ML-DC6V DS1E-ML-DC9V DS1E-ML-DC12V DS1E-ML-DC24V DS1E-ML-DC48V DS1E-SL-DC1.5V DS1E-SL-DC3V DS1E-SL-DC5V DS1E-SL-DC6V DS1E-SL-DC9V DS1E-SL-DC12V DS1E-SL-DC24V DS1E-SL-DC48V

Part No. 2 Form C DS2E-ML-DC1.5V DS2E-ML-DC3V DS2E-ML-DC5V DS2E-ML-DC6V DS2E-ML-DC9V DS2E-ML-DC12V DS2E-ML-DC24V DS2E-ML-DC48V DS2E-SL-DC1.5V DS2E-SL-DC3V DS2E-SL-DC5V DS2E-SL-DC6V DS2E-SL-DC9V DS2E-SL-DC12V DS2E-SL-DC24V DS2E-SL-DC48V

4 Form C DS4E-ML-DC1.5V DS4E-ML-DC3V DS4E-ML-DC5V DS4E-ML-DC6V DS4E-ML-DC9V DS4E-ML-DC12V DS4E-ML-DC24V DS4E-ML-DC48V DS4E-SL-DC1.5V DS4E-SL-DC3V DS4E-SL-DC5V DS4E-SL-DC6V DS4E-SL-DC9V DS4E-SL-DC12V DS4E-SL-DC24V DS4E-SL-DC48V

1 Form C DS1E-ML2-DC1.5V DS1E-ML2-DC3V DS1E-ML2-DC5V DS1E-ML2-DC6V DS1E-ML2-DC9V DS1E-ML2-DC12V DS1E-ML2-DC24V DS1E-ML2-DC48V DS1E-SL2-DC1.5V DS1E-SL2-DC3V DS1E-SL2-DC5V DS1E-SL2-DC6V DS1E-SL2-DC9V DS1E-SL2-DC12V DS1E-SL2-DC24V DS1E-SL2-DC48V

Part No. 2 Form C DS2E-ML2-DC1.5V DS2E-ML2-DC3V DS2E-ML2-DC5V DS2E-ML2-DC6V DS2E-ML2-DC9V DS2E-ML2-DC12V DS2E-ML2-DC24V DS2E-ML2-DC48V DS2E-SL2-DC1.5V DS2E-SL2-DC3V DS2E-SL2-DC5V DS2E-SL2-DC6V DS2E-SL2-DC9V DS2E-SL2-DC12V DS2E-SL2-DC24V DS2E-SL2-DC48V

4 Form C DS4E-ML2-DC1.5V DS4E-ML2-DC3V DS4E-ML2-DC5V DS4E-ML2-DC6V DS4E-ML2-DC9V DS4E-ML2-DC12V DS4E-ML2-DC24V DS4E-ML2-DC48V DS4E-SL2-DC1.5V DS4E-SL2-DC3V DS4E-SL2-DC5V DS4E-SL2-DC6V DS4E-SL2-DC9V DS4E-SL2-DC12V DS4E-SL2-DC24V DS4E-SL2-DC48V

1 coil latching Nominal Voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48

M (180 mW) type

S (90 mW) type

2 coil latching Nominal Voltage, V DC

M (360 mW) type

S (180 mW) type

1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48

Notes: 1. Reverse polarity types available (add suffix-R). 2. Standard packing: carton: 50 pcs.; case: 500 pcs.

DS COIL DATA (at 20°C 68°F) Single side stable Nominal voltage, V DC

M type

S type

1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48

Pick-up voltage, V DC (max.) 1 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.2 2.4 4.0 4.8 7.2 9.6 19.2 38.4

2, 4 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6

Drop-out voltage, V DC (min.) 0.15 0.3 0.5 0.6 0.9 1.2 2.4 4.8 0.15 0.3 0.5 0.6 0.9 1.2 2.4 4.8

Coil resistance, Ω (±10%) 5.63 22.5 62.5 90 203 360 1440 5760 11.3 45 125 180 405 720 2880 11520

Maximum allowable, V DC (at 50°C 122°F) 1 Form C 2, 4 Form C 1.8 2.25 3.6 4.5 6 7.5 7.2 9 10.8 13.5 14.4 18 28.8 36 57.6 72 2.4 3 4.8 6 8.0 10 9.6 12 14.4 18 19.2 24 38.4 48 76.8 96

1 coil latching Nominal voltage, V DC 1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48

M type

S type

Reset Set, V DC (max.) 1 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.2 2.4 4.0 4.8 7.2 9.6 19.2 38.4

Coil resistance, Ω (±10%)

2, 4 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6

12.5 50 139 200 450 800 3200 12800 25 100 278 400 900 1600 6400 25600

Maximum allowable, V DC (at 50°C 122°F) 1 Form C 2, 4 Form C 1.8 2.25 3.6 4.5 6 7.5 7.2 9 10.8 13.5 14.4 18 28.8 36 57.6 72 2.4 3 4.8 6 8.0 10 9.6 12 14.4 18 19.2 24 38.4 48 76.8 96

2 coil latching Nominal voltage, V DC

M type

S type

1.5 3 5 6 9 12 24 48 1.5 3 5 6 9 12 24 48

Reset Set, V DC (max.) 1 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.2 2.4 4.0 4.8 7.2 9.6 19.2 38.4

2,4 Form C 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6

Coil resistance, Ω (±10%) Coil l

Coil ll 6.25 25 69.4 100 225 400 1600 6400 12.5 50 139 200 450 800 3200 12800

Maximum allowable, V DC (at 50°C 122°F) 1 Form C 2,4 Form C 1.8 2.25 3.6 4.5 6 7.5 7.2 9 10.8 13.5 14.4 18 28.8 36 57.6 72 2.4 3 4.8 6 8.0 10 9.6 12 14.4 18 19.2 24 38.4 48 76.8 96

DS DIMENSIONS

mm inch

1 Form C

PC board pattern (Copper-side view) Single side stable, 1 coil latching 2 coil latching

Single side stable, 1 coil latching, 2 coil latching 15 .590

15 .590

5-0.9 dia 5-.035 dia

9.9 .390

9.3 9.9 .366 .340

2.54 .100 0.6 .024

3.4 .134 5.08 .200

7.62 .300

0.6 .024

5.08 .200

7.62 .300

6-0.9 dia 6-.035 dia

2.54 .100

7.62 .300

5.6 .221

0.6 .024

2.54 .100

Tolerance: ±0.1 ±.004

7.62 .300

General tolerance: ±0.3 ±.012

Schematic (Bottom view) Single side stable Deenergized condition 1 +

1 coil latching 1 –

6 –

2 coil latching

6 +

1 +

3 –

6 +

SET RST

SET RST 12 10

N.O. N.C. COM 12 10 7 • A polarity bar showing the relay direction can replace the schematic.

SET RST 12 10

COM 7

Diagram shows the “reset” position when terminals 1 and 6 are energized. Energize with reverse polarity to transfer contacts.

2 Form C

COM 7

Diagram shows the “reset” position when terminals 3 and 6 are energized. Energize terminals 1 and 3 to transfer contacts.

PC board pattern (Copper-side view) Single side stable, 1 coil latching 2 coil latching

Single side stable, 1 coil latching, 2 coil latching

8-0.9 dia 8-.035 dia

9.9 .390

20 .787

20 .787 9.3 9.9 .366 .340

2.54 .100 0.6 .024

3.4 .134 5.08 5.08 .200 .200

0.6 .024

0.6 .024 7.62 .300

5.08 5.08 5.08 .200 .200 .200 2.54 .100

10-0.9 dia 10-.035 dia

2.54 .100

7.62 .300

2.54 .100

7.62 .300

matching 16 pin IC socket

5.6 .221

Tolerance: ±0.1 ±.004

7.62 .300

General tolerance: ±0.3 ±.012

16 –

N.O. N.C. COM + 8 6 4 1 • A polarity bar showing the relay direction can replace the schematic.

2 coil latching

9 11 13 SET RST COM

16 +

9 11 13 15 16 SET RST COM – –

SET RST COM 8 6 4

– 1

SET RST COM + + 8 6 4 2 1

Diagram shows the “reset” position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts.

Set

9 11 13 N.O. N.C. COM

1 coil latching

Reset

Schematic (Bottom view) Single side stable Deenergized condition

Diagram shows the “reset” position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts.

DS 4 Form C

mm inch

Single side stable, 1 coil latching, 2 coil latching 35.24 1.387

35.24 1.387

9.9 .390

9.3 9.9 .366 .340

0.6 .024

3.4 .134 5.08 5.08 .200 .200

7.62 .300

5.08 5.08 5.08 .200 .200 .200

0.6 .024

5.08 5.08 5.08 5.08 5.08 5.08 .200 .200 .200 2.54.200 .200 .200 .100

0.6 .024

5.6 .221 7.62 .300

General tolerance: ±0.3 ±.012

PC board pattern (Copper-side view) Single side stable, 1 coil latching 14-0.9 dia 14-.035 dia 2.54 .100

2 coil latching 16-0.9 dia 16-.035 dia

2.54 .100

7.62 .300

2.54 .100

7.62 .300

2.54 × 2 2.54 × 2 2.54 × 3 2.54 × 2 2.54 × 2 2.54 × 2 .100 × 2 .100 × 2 .100 × 3 .100 × 2 .100 × 2 .100 × 2

2.54 × 2 2.54 × 2 2.54 × 2 2.54 2.54 × 2 2.54 × 2 2.54 × 2 .100 × 2 .100 × 2 .100 × 2 .100 .100 × 2 .100 × 2 .100 × 2

Tolerance: ±0.1 ±.004

N.O. N.C. COM + COM N.C. N.O. 8 6 4 1 3 5 7 • A polarity bar showing the relay direction can replace the schematic.

2 coil latching

9 11 13 16 14 12 10 SET RST COM + COM RST SET

9 11 13 1516 14 12 10 SET RST COM – – COM RST SET

SET RST COM – COM RST SET 8 6 4 1 3 5 7

SET RST COM + + COM RST SET 8 6 4 2 1 3 5 7

Set

9 11 13 16 14 12 10 N.O. N.C. COM – COM N.C. N.O.

1 coil latching

Reset

Schematic (Bottom view) Single side stable Deenergized condition

Diagram shows the “reset” position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts.

Diagram shows the “reset” position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts.

2. Life curve (Resistive load)

3. Contact reliability for AC loads

REFERENCE DATA 1. Maximum switching capacity

10V

2.0 1.0 0.5

100mA 1A Switching current

1 2 Switching current, A

0.1

VA C 125V AC Weibull probability data

0.2 10mV 10µA

250

5.0 125 V DC

0.5A

10.0

0.3A

100

70.0 50.0 30.0

0.5

No. of operations, ×104

100V

30 V DC

99.9 99.0 95.0

1 A 2 A 12 50V 5V A C AC

1,000

1,000V

Contact voltage

F(t), %

Sample: DS2E-M-DC24V 10 pcs. Cycle rate: 20 cpm. Detection level: 200 mΩ

10 100 No. of operations, ×104

1,000

DS 4-(1). Coil termperature rise (2 Form C single side stable type)

4-(2). Coil tempeature rise (4 Form C single side stable type)

4-(3). Coil temperature rise (2 Form C 2 coil latching type)

Point measured: Inside the coil Ambient temperature: 18° to 19°C 64° to 66°F

Point measured: Inside the coil Ambient temperature: 17° to 18°C 63° to 64°F

Point measured: Inside the coil Ambient temperature: 20° to 21°C 68° to 70°F

0A 40 30

Temperature rise, °C

50 3A

2A 30 0A

110 Coil applied voltage, %V

100

110 Coil applied voltage, %V

Point measured: Inside the coil Ambient temperature: 20°C 68°F

Test condition: Without diode connected to coil in parallel 4

2A 40 0A 30 20 Reset coil Set coil

100

6-(2). Influence of adjacent mounting (2 Form C) 10

Pick-up voltage

–10

10 0

Drop-out voltage

OFF

Release time (mean) 1

110 Coil applied voltage, %V

Pick-up voltage

(1) (2) (3) OFF

OFF

0 –10

Drop-out voltage

0 –10

5 10 .197 .394 Inter-relay distance , mm inch

OFF

(1) (2) (3)

OFF

20 0 OFF

OFF

–20

OFF

Drop-out voltage

20 0 –20

–60 –80

–80 5 10 .197 .394 Inter-relay distance , mm inch

–60 –10

–40 ON

(1) (2) (3)

OFF

Pick-up voltage

–40 ON

100 120 Coil applied voltage, %

OFF

0 ON

100

6-(3). Influence of adjacent mounting (4 Form C)

(1) (2) (3) OFF

Operate time (mean)

110 Coil applied voltage, %V

Rate of change, %

Operate and release time, ms

Reset coil Set coil

6-(1). Influence of adjacent mounting (1 Form C)

Rate of change, %

100

5. Operate and release time characteristics (2 Form C single side stable type)

Temperature rise, °C

0A 30 20

4-(4). Coil temperature rise (4 Form C 2 coil latching type)

Rate of change, %

2A 40

Rate of change, %

Temperature rise, °C

10 20 .394 .787 Inter-relay distance , mm inch

For Cautions for Use, see Relay Technical Information

10 20 .394 .787 Inter-relay distance , mm inch

DS2Y

DS2Y RELAYS

MINIATURE RELAY

20 .787

FEATURES

9.9 .390

• 2 Form C contact • High sensitivity-200 mW nominal operating power • High breakdown voltage 1500 V FCC surge between open contacts • DIP-2C type matching 16 pin IC socket • Sealed construction

9.3 .366

mm inch

SPECIFICATIONS Contact

Characteristics (at 20°C 68°F)

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Max. switching power Max. switching voltage Rating (resistive) Max. switching current Max. carrying current Mechanical Expected life (min. 1 A 30 V DC operations) Electrical 2 A 30 V DC

2 Form C

Initial insulation resistance*1 Between open contacts Initial breakdown Between contact sets voltage*2 Between contact and coil FCC surge voltage between contacts and coil Operate time*3 (at nominal voltage)

50 mΩ Gold-clad sliver 60 W, 62.5 VA 220 V DC, 250 V AC 2A 3A 1×108

2 coil latching

Minimum operating power Nominal operating power Minimum set and reset power Nominal set and reset power

1,500 V

Release time*3 (at nominal voltage) Set time*3 (latching) (at nominal voltage) Reset time*3 (latching) (at nominal voltage)

5×105 1×105

Temperature rise

Coil (polarized) (at 20°C 68°F) Single side stable

Min. 100 MΩ (at 500 V DC) 750 Vrms 1,000 Vrms 1,000 Vrms

Approx. 98 mW (147 mW: 48 V) Approx. 200 mW (300 mW: 48 V) Approx. 88 mW (177 mW: 48 V) Approx. 180 mW (360 mW: 48 V)

Functional*6 Vibration resistance Destructive Conditions for operation, Ambient transport and storage*7 temp. (Not freezing and condensHumidity ing at low temperature) Unit weight

Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms, detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

Functional*4 Destructive*5

Shock resistance

Approx. 4 ms Approx. 3 ms Approx. 3 ms Approx. 3 ms Max. 65°C with nominal voltage across coil and at nominal switching capacity Min. 490 m/s2 {50 G} Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm –40°C to +70°C –40°F to +158°F 5 to 85% R.H. Approx. 4 g .14 oz

FCC (Federal Communication Commission) requests following standard as Breakdown Voltage specification.

1500V 750V 10 µs 160 µs

TYPICAL APPLICATIONS • Telecommunication equipment • Office equipment • Computer peripherals • Security alarm systems • Medical equipment

ORDERING INFORMATION Ex DS2Y-S Operating function Nil: Single side stable L2: 2 coil latching

DC12 V Coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V

R Polarity Nil: Standard polarity R: Reverse polarity

DS2Y TYPES AND COIL DATA (at 20°C 68°F) Single side stable Nominal voltage, V DC 1.5 3 5 6 9 12 24 48

Pick-up voltage, V DC (max.) 1.05 2.10 3.5 4.2 6.3 8.4 16.8 33.6

Part No. DS2Y-S-DC1.5V DS2Y-S-DC3V DS2Y-S-DC5V DS2Y-S-DC6V DS2Y-S-DC9V DS2Y-S-DC12V DS2Y-S-DC24V DS2Y-S-DC48V

Drop-out voltage, V DC (min.) 0.15 0.3 0.5 0.6 0.9 1.2 2.4 4.8

Nominal operating current mA (±10%) 132.7 66.7 40 33.3 22.2 16.7 8.3 6.3

Nominal operating power mW 200 200 200 200 200 200 200 300

Maximum allowable voltage, V DC (at 50°C 122°F) 3 6 10 12 18 24 48 86

Nominal operating power, mW Set Reset 180 180 180 180 180 180 180 180 180 180 180 180 180 180 360 360

Maximum allowable voltage, V DC (at 50°C 122°F)

Coil resistance, Ω (±10%) 11.3 45 125 180 405 720 2,880 7,680

(Note) Standard packing: Carton: 50 pcs. Case: 500 pcs.

2 coil latching Nominal voltage, V DC

Part No.

Reset set, V DC (max.)

1.5 3 5 6 9 12 24 48

DS2Y-SL2-DC1.5V DS2Y-SL2-DC3V DS2Y-SL2-DC5V DS2Y-SL2-DC6V DS2Y-SL2-DC9V DS2Y-SL2-DC12V DS2Y-SL2-DC24V DS2Y-SL2-DC48V

1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6

Nominal operating current mA (±10%) Set Reset 120 120 60 60 36 36 30 30 20 20 15 15 7.5 7.5 7.5 7.5

Coil resistance, Ω (±10%) Set Reset 12.5 12.5 50 50 139 139 200 200 450 450 800 800 3,200 3,200 6,400 6,400

3 6 10 12 18 24 48 72

(Note) Standard packing: Carton: 50 pcs. Case: 500 pcs.

DIMENSIONS

mm inch

Single side stable

PC board pattern (Copper-side view) 9.9 .390

20 .787

2.54 .100 9.3 .366

5.08 5.08 .200 .200

7.62 .300

2.0 .078 0.6 .024

5.6 .220 7.62 .300

9 11 13 N.O. N.C. COM

16 –

N.O. N.C. COM 8 6 4

+ 1

2.54 .100

0.6 .024

Schematic (Bottom view) (Deenergized position)

8-0.9 dia 8-.035 dia

3.4 .134

7.62 .300

0.3 .012

matching 16 pin IC socket

Tolerance: ±0.1 ±.004

Direction indication*

*A polarity bar shows the relay direction.

General tolerance: ±0.3 ±.012

PC board pattern (Copper-side view)

(Reset position)

10-0.9 dia 10-.035 dia

9.9 .390

2.54 .100 9.3 .366

2.54 .100

0.6 .024

5.08 5.08 5.08 .200 .200 .200 2.54 .100

2.0 .078 0.6 .024

0.6 .024 5.6 .220 7.62 .300

3.4 .134 0.3 .012

9 11 13 SET RST COM

7.62 .300 SET RST COM 8 6 4

matching 16 pin IC socket

Tolerance: ±0.1 ±.004

General tolerance: ±0.3 ±.012

15 16 – –

Reset

20 .787

Schematic (Bottom view)

Set

2 coil latching

+ + 2 1

Direction indication*

*A polarity bar shows the relay direction. Diagram shows the “reset” position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts.

DS2Y REFERENCE DATA 1. Maximum switching capacity

2-(1) Coil temperature rise (Single side stable)

2-(2) Coil temperature rise 2 coil latching

Tested sample: DS2Y-S-DC12V, 5 pcs. Measured portion: Inside the coil Ambient temperature: 21°C to 25°C 70°F to 77°F

Tested sample: DS2Y-SL2-DC12V, 5 pcs. Measured portion: Inside the coil Ambient temperature: 21°C to 25°C 70°F to 77°F

1,000 V

Temperature rise, °C

100 V

10 V

100 mA

Tested sample: DS2Y-S-DC12V, 10 pcs. Ambient temperature: 20°C 68°F

Time, ms

Mean value Mean value

80 100 120 Coil applied voltage, %V

30 2A 0A

110 Coil applied voltage, %V

100

110 Coil applied voltage, %V

4-(1) Influence of adjacent mounting

4-(2) Influence of adjacent mounting

Tested sample: DS2Y-S-DC12V, 10 pcs. Ambient temperature: 20°C 68°F

TEST METHOD 1. Apply nominal voltage to No. (1) and (3) DS2Y relays. 2. Measure pick-up voltage and drop-out voltage of No. (2) relay when inter-relay distance ( ) changes.

(1) OFF

(2)

(3) OFF

8 ON

Pick-up voltage 6 OFF

OFF

4 Drop-out voltage

100

Operate time Release time

1A Switching current

3. Operate/release time for single side stable (Without diode)

Pick-up/Drop-out voltage, V

10 mA 10 µA

Pick-up/Drop-out voltage, V

Contact voltage

Temperature rise, °C

Set coil Reset coil

10 (1) OFF

(2)

Pick-up voltage

OFF

4 Drop-out voltage 2

5 10 15 .197 .394 .591 Inter-relay distance, mm inch

(3) OFF

For Cautions for Use, see Relay Technical Information

5 10 15 .197 .394 .591 Inter-relay distance, mm inch

GN (AGN)

TESTING

ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY

GN RELAYS (AGN)

FEATURES 5.70±0.3 .224±.012

10.60±0.3 .417±.012

9.00±0.3 .354±.012

10.60±0.3 .417±.012

5.70±0.3 .224±.012 Max.10.00 .394

mm inch

• Compact slim body saves space Thanks to the small surface area of 5.7 mm × 10.6 mm .224 inch × .417 inch and low height of 9.0 mm .354 inch, the packaging density can be increased to allow for much smaller designs. • Outstanding surge resistance. Surge withstand between open contacts: 1,500 V 10×160 µs (FCC part 68) Surge withstand between contacts and coil: 2,500 V 2×10 µs (Telcordia) • The use of twin crossbar contacts ensures high contact reliability. AgPd contact is used because of its good sulfide resistance. Adopting low-gas molding material. Coil assembly molding technology which avoids generating volatile gas from coil.

• Increased packaging density Due to highly efficient magnetic circuit design, leakage flux is reduced and changes in electrical characteristics from components being mounted closetogether are minimized. This all means a packaging density higher than ever before. • Nominal operating power: 140 mW • Outstanding vibration and shock resistance. Functional shock resistance: 750 m/s2 {75G} Destructive shock resistance: 1,000 m/s2 {100G} Functional vibration resistance: 10 to 55 Hz (at double amplitude of 3.3 mm .130 inch) Destructive vibration resistance: 10 to 55 Hz (at double amplitude of 5 mm .197 inch)

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A ) Contact material

Rating

Nominal operating power

Expected life (min. operations)

Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Min. switching capacity ❇1 Single side stable 1 coil latching Mechanical (at 180 cpm) 1 A 30 V DC resistive Electrical (at 20 cpm) 0.3 A 125 V AC resistive

2 Form C 100 mΩ Stationary: AgPd+Au clad Movable: AgPd 1 A 30 V DC 0.3 A 125 V AC 30 W, 37.5 V A 110 V DC, 125 V AC 1A 10 µA 10 mV DC 140mW (1.5 to 12 V DC) 230mW (24 V DC) 100mW (1.5 to 12 V DC) 120mW (24 V DC) 5 × 107 105 105

Remarks: * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 Detection current: 10mA. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10µs. 6 * Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10µs. *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

Initial insulation resistance*1 Min. 1,000MΩ (at 500V DC) Between open contacts 750 Vrms for 1min. Initial breakdown Between contact sets 1,000 Vrms for 1min. voltage*2 Between contacts and coil 1,500 Vrms for 1min. Between open contacts 1,500 V (FCC Part 68) Initial surge (10×160 µs) voltage Between contacts and coil 2,500 V (Telcordia) (2×10 µs) Max. 4 ms (Approx. 2 ms) Operate time [Set time]*3 (at 20°C) [Max. 4 ms (Approx. 2 ms)] Release time (without diode) Max. 4 ms (Approx. 1 ms) [Reset time]*3 (at 20°C) [Max. 4 ms (Approx. 2 ms)] Temperature rise*4 (at 20°C) Max. 50°C Functional*5 Min. 750 m/s2{75G] Shock resistance Destructive*6 Min. 1,000 m/s2{100G] 10 to 55 Hz at double Functional*7 amplitude of 3.3 mm Vibration resistance 10 to 55 Hz at double Destructive amplitude of 5 mm Ambient –40°C to 85°C Conditions for temperature ❇2 –40°F to 185°F operation, transport and storage*8 (Not freezing and Humidity 5 to 85% R.H. condensing at low temperature) Unit weight Approx. 1 g .035 oz Notes: ❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. ❇2 The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40° to +158°F.

GN (AGN) TYPICAL APPLICATIONS • Home appliances, and audio/visual equipment • Automotive equipment • Medical equipment

• Communications (XDSL, Transmission) • Measurement • Security

ORDERING INFORMATION Ex. AGN Contact arrangement Operating function 2: 2 Form C

0: Single side stable 1: 1 coil latching

Type of operation

Terminal shape

0: Standard type (B.B.M.)

Nil: Standard PC board terminal A: Surface-mount terminal A type S: Surface-mount terminal S type

Packing style

Coil voltage (DC) 1H: 1.5V 03 : 3V 4H: 4.5V 06 : 6V

09 : 9V 12 : 12V 24 : 24V

Nil: Tube packing Z: Tape and reel packing (picked from 5/6/7/8 pin side)

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. Suffix “X” instead of “Z”.

TYPES AND COIL DATA (at 20°C 68°F) (1) Standard PC board terminal Part No. Operating Function

Standard PC board terminal AGN2001H AGN20003 AGN2004H AGN20006 AGN20009 AGN20012 AGN20024

Single side stable

Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 4.5 6.75 9 18

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.6 0.9 1.2 2.4

Coil Rating, V DC

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

1.5 3 4.5 6 9 12 24

1.13 2.25 3.38 4.5 6.75 9 18

Coil Rating, V DC 1.5 3 4.5 6 9 12 24

Part No. Operating Function

Standard PC board terminal

1 coil latching

AGN2101H AGN21003 AGN2104H AGN21006 AGN21009 AGN21012 AGN21024

Nominal operating current, mA (±10%) 93.8 46.7 31 23.3 15.5 11.7 9.6 Nominal operating current, mA (±10%) 66.7 33.3 22.2 16.7 11.1 8.3 5.0

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

16 64.2 145 257 579 1,028 2,504

140 140 140 140 140 140 230

2.25 4.5 6.75 9 13.5 18 28.8

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

22.5 90 202.5 360 810 1,440 4,800

100 100 100 100 100 100 120

2.25 4.5 6.75 9 13.5 18 36

1) Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

(2) Surface-mount terminal Part No. Operating Function

Single side stable

Tube packing

Tape and reel packing

AGN200❍1H AGN200❍03 AGN200❍4H AGN200❍06 AGN200❍09 AGN200❍12 AGN200❍24

AGN200❍1HZ AGN200❍03Z AGN200❍4HZ AGN200❍06Z AGN200❍09Z AGN200❍12Z AGN200❍24Z

Coil Rating, V DC

Pick-up voltage, V DC (max.) (initial)

Drop-out voltage, V DC (min.) (initial)

1.5 3 4.5 6 9 12 24

1.13 2.25 3.38 4.5 6.75 9 18

0.15 0.3 0.45 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 93.8 46.7 31 23.3 15.5 11.7 9.6

❍: For each surface-mounted terminal variation, input the following letter. A type: A, S type: S 1) Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. Tape and reel: 500 pcs.; Case: 1,000 pcs. 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

Coil resistance, Ω (±10%) 16 64.2 145 257 579 1,028 2,504

Nominal operating power, mW 140 140 140 140 140 140 230

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 28.8

GN (AGN) Part No. Operating Function

1 coil latching

Tube packing

Tape and reel packing

AGN210❍1H AGN210❍03 AGN210❍4H AGN210❍06 AGN210❍09 AGN210❍12 AGN210❍24

AGN210❍1HZ AGN210❍03Z AGN210❍4HZ AGN210❍06Z AGN210❍09Z AGN210❍12Z AGN210❍24Z

Coil Rating, V DC

Set voltage, V DC (max.) (initial)

1.5 3 4.5 6 9 12 24

1.13 2.25 3.38 4.5 6.75 9 18

Reset voltage, V DC (max.) (initial) 1.13 2.25 3.38 4.5 6.75 9 18

Nominal operating current, mA (±10%) 66.7 33.3 22.2 16.7 11.1 8.3 5.0

Coil resistance, Ω (±10%) 22.5 90 202.5 360 810 1,440 4,800

Nominal operating power, mW 100 100 100 100 100 100 120

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 36

DIMENSIONS

mm inch

1. PC board terminal

PC board pattern 5.70±0.3 .224±.012

10.60±0.3 .417±.012

7.60 .299 3.20 .126

(0.50) 9.00±0.3 (.020) .354±.012 3.50±0.3 .138±.012

0.40±0.1 .016±.004 (1.50) (.059)

3.20±0.15 .126±.006

2. Surface-mount terminal

2 3 4

7 6 5

Direction indication

Suggested mounting pad

0.40±0.1 .016±.004 (1.50) (.059)

3.10 .122

7.40±0.3 .291±.012

0.80 .031

7 6 5

2 3 4

Direction indication

Tolerance: ±0.1 ±.004 Suggested mounting pad

5.70±0.3 .224±.012

10.60±0.3 .417±.012

1) S type 0.25±0.1 .010±.004 0.40±0.1 .016±.004 (1.50) (.059)

2.20 .087

3.20 .126 2.25 .089

(0.50) 9.00±0.3 (.020) .354±.012 Max. 10.00 .394

4.45 .175

3.20±0.15 .126±.006

2.20±0.15 .087±.006 3.20±0.15 .126±.006

0.80 .031

Tolerance: ±0.1 ±.004

5.70±0.3 .224±.012

REFERENCE DATA 1. Max. switching capacity

2. Life curve

1.0

0.3

No. of operations, × 104

Switching current, A

100 DC resistive load AC resistive load

50 40 30 DC 30V resistive load 20

AC 125V resistive load

100 Contact voltage, V

0.2

0.4

0.6

2 3 4

7 6 5

Direction indication

0.8

1 coil latching (Reset condition) 8

7 6 5

2 3 4

5.30 .209

3.20±0.15 .126±.006

2.20±0.15 .087±.006 3.20±0.15 .126±.006

Schematic (Top view) Single side stable (Deenergized condition)

2.20 .087

3.20 .126

(0.50) 9.00±0.3 (.020) .354±.012 Max. 10.00 .394

0.25±0.1 .010±.004

1 coil latching (Reset condition)

Tolerance: ±0.1 ±.004

5.70±0.3 .224±.012

10.60±0.3 .417±.012

1) A type

3.20 .126

2.20 8-0.85 dia. .087 8-.033 dia

0.25±0.1 .010±.004

2.20±0.15 .087±.006 3.20±0.15 .126±.006

Schematic (Bottom view) Single side stable (Deenergized condition)

1.0

1.2

Switching current, A

Direction indication

GN (AGN) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Orientation (indicates PIN No.1)stripe

Stopper (green)

Stopper (red)

2) Tape and reel packing (A type) (1)-1 Tape dimensions

2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 4.9 N {500gf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less C

mm inch

Relay polarity bar (Z type)

4.00 .157 2.00 .079

1.50 +0.1 0 dia .059 +.004 dia 0

0.40 .016

11.50 .453 1.75 .069

24.00±0.3 .945±.012

11.10 .437

10.70±0.2 .421±.008

2.00dia .079dia

GN relays

16.00 .630

8.00 .315

Tape coming out direction General tolerance ±0.1 mm .004 inch

; ; ; ;;

;;

Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided.

(S type) (1)-2 Tape dimensions Relay polarity bar (Z type) 1.50 +0.1 0 dia

.059 +.004 dia 0

2.00 .079

4.00 2.0dia .157 .079dia 1.75 .069

10.70±0.2 .421±.008 0.40 .016

11.50 .453 24.00±0.3 .945±.012 11.10 .437

GN relays

16.00 .630

6.3 .248

Tape coming out direction General tolerance ±0.1 mm .004 inch

(2) Dimensions of plastic peel mm inch 21±0.8 dia. .827±.031 dia.

2.0±0.5 .079±.020 100±1 dia. 3.937±.039 dia. 370±2 dia. 14.567±.079 dia. 13±0.2 dia. .512±.008 dia. 24.4 +2 0 .961 +.079 0

2.0±0.2 .079±.008

For Cautions for Use, see Relay Technical Information

GQ (AGQ)

TESTING

ULTRA-SMALL PACKAGE FLAT POLARIZED RELAY

GQ RELAYS (AGQ)

FEATURES 7.20±0.3 .283±.012

10.60±0.3 .417±.012

5.20±0.2 .205±.008

10.60±0.3 .417±.012

7.20±0.3 .283±.012 Max.5.40 .213

mm inch

• Compact flat body saves space With a small footprint of 10.6 mm (L) × 7.2 mm (W) .417 inch (L) × .283 inch (W) for space savings, it also has a very short height of 5.2 mm .205 inch. (Standard PC board type.) • Outstanding surge resistance. Surge withstand between open contacts: 1,500 V 10×160 µs (FCC part 68) Surge withstand between contacts and coil: 2,500 V 2×10 µs (Telcordia) • The use of twin crossbar contacts ensures high contact reliability. AgPd contact is used because of its good sulfide resistance. Adopting low-gas molding material. Coil assembly molding technology which avoids generating volatile gas from coil.

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A ) Contact material

Rating

Nominal operating power

Expected life (min. operations)

Remarks: * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 Detection current: 10mA. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *5 Half-wave pulse of sine wave: 6 ms;detection time: 10µs. 6 * Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10µs. *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

Initial insulation resistance*1 Min. 1,000MΩ (at 500V DC) Between open contacts 750 Vrms for 1min. Initial breakdown Between contact sets 1,000 Vrms for 1min. voltage*2 Between contacts and coil 1,500 Vrms for 1min. Between open contacts 1,500 V(FCC Part 68) Initial surge (10×160 µs) voltage Between contacts and coil 2,500 V(Telcordia) (2×10 µs) Max. 4 ms (Approx. 2 ms) Operate time [Set time]*3 (at 20°C) [Max. 4 ms (Approx. 2 ms)] Release time (without diode) Max. 4 ms (Approx. 1 ms) [Reset time]*3 (at 20°C) [Max. 4 ms (Approx. 2 ms)] Temperature rise*4 (at 20°C) Max. 50°C Functional*5 Min. 750 m/s2{75G] Shock resistance Destructive*6 Min. 1,000 m/s2{100G] 10 to 55 Hz at double Functional*7 amplitude of 3.3 mm Vibration resistance 10 to 55 Hz at double Destructive amplitude of 5 mm Ambient –40°C to 85°C Conditions for temperature ❇2 –40°F to 185°F operation, transport and storage*8 (Not freezing and Humidity 5 to 85% R.H. condensing at low temperature) Unit weight Approx. 1 g .035 oz Notes: ❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. ❇2 The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40° to +158°F.

GQ (AGQ) TYPICAL APPLICATIONS • Home appliances, and audio/visual equipment • Automotive equipment • Medical equipment

• Communications (XDSL, Transmission) • Measurement • Security

ORDERING INFORMATION Ex. AGQ Contact arrangement Operating function 2: 2 Form C

0: Single side stable 1: 1 coil latching

Type of operation

Terminal shape

0: Standard type (B.B.M.)

Nil: Standard PC board terminal A: Surface-mount terminal A type S: Surface-mount terminal S type

Packing style

Coil voltage (DC) 1H: 1.5V 03 : 3V 4H: 4.5V 06 : 6V

09 : 9V 12 : 12V 24 : 24V

Nil: Tube packing Z: Tape and reel packing (picked from 5/6/7/8 pin side)

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. Suffix “X” instead of “Z”.

TYPES AND COIL DATA (at 20°C 68°F) (1) Standard PC board terminal Part No. Operating Function

Single side stable

Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 4.5 6.75 9 18

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.6 0.9 1.2 2.4

Coil Rating, V DC

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

1.5 3 4.5 6 9 12 24

1.13 2.25 3.38 4.5 6.75 9 18

Coil Rating, V DC

Standard PC board terminal AGQ2001H AGQ20003 AGQ2004H AGQ20006 AGQ20009 AGQ20012 AGQ20024

1.5 3 4.5 6 9 12 24

Part No. Operating Function

1 coil latching

Standard PC board terminal AGQ2101H AGQ21003 AGQ2104H AGQ21006 AGQ21009 AGQ21012 AGQ21024

Nominal operating current, mA (±10%) 93.8 46.7 31 23.3 15.5 11.7 9.6 Nominal operating current, mA (±10%) 66.7 33.3 22.2 16.7 11.1 8.3 5.0

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

16 64.2 145 257 579 1,028 2,504

140 140 140 140 140 140 230

2.25 4.5 6.75 9 13.5 18 28.8

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

22.5 90 202.5 360 810 1,440 4,800

100 100 100 100 100 100 120

2.25 4.5 6.75 9 13.5 18 36

1) Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

(2) Surface-mount terminal Part No. Operating Function

Single side stable

Tube packing

Tape and reel packing

AGQ200❍1H AGQ200❍03 AGQ200❍4H AGQ200❍06 AGQ200❍09 AGQ200❍12 AGQ200❍24

AGQ200❍1HZ AGQ200❍03Z AGQ200❍4HZ AGQ200❍06Z AGQ200❍09Z AGQ200❍12Z AGQ200❍24Z

Coil Rating, V DC

Pick-up voltage, V DC (max.) (initial)

Drop-out voltage, V DC (min.) (initial)

1.5 3 4.5 6 9 12 24

1.13 2.25 3.38 4.5 6.75 9 18

0.15 0.3 0.45 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 93.8 46.7 31 23.3 15.5 11.7 9.6

❍: For each surface-mounted terminal variation, input the following letter. A type: A, S type: S 1) Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. Tape and reel: 900 pcs.; Case: 1,800 pcs. 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

Coil resistance, Ω (±10%) 16 64.2 145 257 579 1,028 2,504

Nominal operating power, mW 140 140 140 140 140 140 230

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 28.8

GQ (AGQ) Part No. Operating Function

1 coil latching

Tube packing

Tape and reel packing

AGQ210❍1H AGQ210❍03 AGQ210❍4H AGQ210❍06 AGQ210❍09 AGQ210❍12 AGQ210❍24

AGQ210❍1HZ AGQ210❍03Z AGQ210❍4HZ AGQ210❍06Z AGQ210❍09Z AGQ210❍12Z AGQ210❍24Z

Coil Rating, V DC

Set voltage, V DC (max.) (initial)

1.5 3 4.5 6 9 12 24

1.13 2.25 3.38 4.5 6.75 9 18

Reset voltage, V DC (max.) (initial) 1.13 2.25 3.38 4.5 6.75 9 18

Nominal operating current, mA (±10%) 66.7 33.3 22.2 16.7 11.1 8.3 5.0

Coil resistance, Ω (±10%) 22.5 90 202.5 360 810 1,440 4,800

Nominal operating power, mW 100 100 100 100 100 100 120

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 36

DIMENSIONS

mm inch

1. PC board terminal

PC board pattern 10.60±0.3 .417±.012

7.20±0.3 .283±.012

5.20±0.2 .205±.008

2.20 .087 3.20 .126

0.40±0.1 .016±.004 3.20±0.15 .126±.006

2.20 .087

8-0.85 dia. 8-.033 dia.

7.20±0.3 .283±.012

10.60±0.3 .417±.012

2.20 .087 2.20 .087

3.20 .126

0.40±0.1 .016±.004 3.20±0.15 .126±.006

2.20±0.15 .087±.006 2.20±0.15 .087±.006

0.20±0.1 .008±.004

2.66 6.74 .105 .265

5.08±0.15 .200±.006 8.40±0.3 .331±.012

7 6 5

2 3 4

Direction indication

0.80 .031

Single side stable/ 1 coil latching

1) S type 7.20±0.3 .283±.012

10.60±0.3 .417±.012

0.40±0.1 .016±.004 3.20±0.15 .126±.006

2.20 .087 2.20 .087

3.20 .126 0.20±0.1 .008±.004 5.08±0.15 .200±.006

2.20±0.15 .087±.006 2.20±0.15 .087±.006

2.06 .081

6.14 .242

0.80 .031

7.20±0.3 .283±.012

Tolerance: ±0.1 ±.004

REFERENCE DATA 1. Max. switching capacity

2. Life curve

0.3

No. of operations, × 104

Switching current, A

100 DC resistive load AC resistive load

50 40 30 DC 30V resistive load 20

AC 125V resistive load

100 Contact voltage, V

2 3 4

7 6 5

Direction indication

Schematic (Top view) Single side stable (Deenergized condition)

Suggested mounting pad

7 6 5

Suggested mounting pad

1) A type

1.0

Direction indication

Single side stable/ 1 coil latching

Max. 5.40 .213

2 3 4

Tolerance: ±0.1 ±.004

2. Surface-mount terminal

Max. 5.40 .213

1 coil latching (Reset condition)

5.08 .200

0.20±0.1 .008±.004 5.08±0.15 .200±.006

2.20±0.15 .087±.006 3.50±0.3 2.20±0.15 .138±.012 .087±.006

Schematic (Bottom view) Single side stable (Deenergized condition)

0.2

0.4

0.6

0.8

1.0

1.2

Switching current, A

1 coil latcing (Reset condition) 8

7 6 5

2 3 4

Direction indication

GQ (AGQ) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Orientation (indicates PIN No.1)stripe

Stopper (green)

Stopper (red)

2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A : 9.8 N {1 kgf} or less Chucking pressure in the direction B : 9.8 N {1 kgf} or less Chucking pressure in the direction C : 9.8 N {1 kgf} or less

Stopper (green)

Stopper (red)

2) Tape and reel packing (A type) (1)-1 Tape dimensions mm inch Relay polarity bar (Z type)

1.50 +0.1 0 dia. .059 +.003 .0 dia.

2.00dia. 4.00 .079dia. .157 1.75 .069

2.0 .079

; ; ;;

Orientation (indicates PIN No.1)stripe

Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be also avoided.

Max. 6.55 .256 0.40 .016

11.5 .453 24.0±0.3 .945±.012 11.1 .437 12.0 .472

GQ relays

9.0 .354

Tape coming out direction General tolerance ±0.1 mm .004 inch

(S type) (1)-2 Tape dimensions Relay polarity bar (Z type)

1.50 +0.1 0 dia. .059 +.003 .0 dia. 2.0 .079

4.0 2.00dia. .157 .079dia. 1.75 .069

Max. 6.55 .256 0.40 .016

11.5 .453

24.0±0.3 .945±.012

11.1 .437

GQ relays

12.0 .472

7.8 .307

Tape coming out direction General tolerance ±0.1 mm .004 inch

(2) Dimensions of plastic peel mm inch 21±0.8 dia. .827±.031 dia. 2.0±0.5 .079±.020 100±1 dia. 3.937±.039 dia. 330±2 dia. 12.992±.079 dia. 24.4 +20 13±0.2 dia. .961 +.079 0 .512±.008 dia.

2.0±0.2 .079±.008

For Cautions for Use, see Relay Technical Information

COST SAVING SUBMINIATURE PC BOARD RELAYS 14.0 .551

14.2 .559

26.5 1.043

26.3 1.035 16.9 .665

17.7 .697

HA-RELAYS

FEATURES • Compact construction • Sensitive - very low operating power • Soldering flux inflow prevented by molded construction • Contact capacity - 3 A 250 V AC, 30 V DC • Simple mechanism for stable quality - only 9 pieceparts • Amber sealed types available

HAE Amber Relays mm inch

SPECIFICATIONS HA1 Standard type Contacts

HA1E Amber sealed type Contacts

Arrangement

1 Form C

Contact material Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Max. switching power Rating (resistive Max. switching voltage load) Max. switching current Mechanical Expected life (min. Electrical 3 A 250 V AC operations) (resistive) 3 A 30 V DC

Silver-nickel 50 mΩ 750 VA, 90 W 250 V AC, 30 V DC 3A 107 105 5×105

Coil (AC) 0.58 VA, (DC) 230 mW (AC) 0.9 VA, (DC) 360 mW

Characteristics

50 mΩ 500 VA, 90 W 250 V AC, 30 V DC 2 A AC, 3A DC 107 105 2×105

Minimum operating power Nominal operating power

(AC) 0.58 VA, (DC) 230 mW (AC) 0.9 VA, (DC) 360 mW

Characteristics

Maximum operating speed Initial insulation resistance*1 (at 25°C, 50% R.H.) Initial Between open contacts breakdown 2 Between contacts and coil voltage* Operate time*3 (at nominal voltage) (at 20°C) Release time (without diode)*3 (at nominal voltage)(at 20°C) Temperature rise (at 20°C) Functional Destructive Functional Vibration resistance Destructive Conditions for operation, transport and storage*4 (Not freezing and condensing at low temperature) Unit weight Remarks

1 Form C Gold-clad over silver-nickel

Coil

Minimum operating power Nominal operating power

Shock resistance

Arrangement Contact material Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Max. switching power Rating (resistive Max. switching voltage load) Max. switching current Mechanical Expected life (min. Electrical 2 A 250 V AC operations) (resistive) 3 A 30 V DC

20 cpm Min. 100 MΩ at 500 V DC 750 Vrms for 1 min. 1,500 Vrms for 1 min. Approx. 6 ms (AC), Approx. 5 ms (DC) Approx. 6 ms (AC), Approx. 3 ms (DC) Max. (AC) 60°C, (DC) 40°C with nominal coil voltage and at 3A switching current 98 m/s2 {10G} 980 m/s2 {100G} 10 to 55Hz at double amplitude of 1mm 10 to 55Hz at switching of 2mm

Ambient temp.

–40°C to +50°C –40°F to +122°F

Humidity

5 to 85%R.H. Approx. 15 g .53 oz

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Intial breakdown voltage" section *2 Detection current: 10 mA

Functional Destructive Functional

Vibration resistance Destructive Conditions for operation, transport and storage*4 (Not freezing and condensing at low temperature) Unit weight

Ambient temp.

–40°C to +50°C –40°F to +122°F

Humidity

5 to 85%R.H. Approx. 15 g.53 oz

*3 Excluding contact bounce time *4 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.

HA TYPICAL APPLICATIONS

ORDERING INFORMATION Ex.

Office machines, electrical home appliances, load management equipment.

DC6V

Contact arrangement

Type classification

Coil voltage

1: 1 Form C

Nil: Dust cover type E: Amber sealed type

DC 5, 6, 9, 12, 24 V AC 6, 12, 24, 48, 115V

Notes: 1. For UL/CSA recognized types, add suffix UL/CSA. (Notes) 2. Standard packing Carton: 100 pcs., Case: 500 pcs. or 2,000 pcs.

TYPES AND COIL DATA (at 20°C 68°F) Part No.

Nominal voltage

Pick-up voltage, (max.)

Drop-out voltage, (min.)

* Nominal operating current, mA

Nominal operating power

Coil resistance, Ω (±10%)

Maximum allowable voltage

6 V AC

4.8 V AC

1.2 V AC

150

0.9 VA

—

6.6 V AC

12 V AC

9.6 V AC

2.4 V AC

0.9 VA

—

13.2 V AC

24 V AC

19.2 V AC

4.8 V AC

0.9 VA

—

26.4 V AC

48 V AC

38.4 V AC

9.6 V AC

0.9 VA

—

52.8 V AC

115 V AC

92.0 V AC

23.0 V AC

0.9 VA

—

126.5 V AC

5 V DC

4.0 V DC

0.5 V DC

360 mW

6.0 V DC

6 V DC

4.8 V DC

0.6 V DC

360 mW

100

7.2 V DC

9 V DC

7.2 V DC

0.9 V DC

360 mW

225

10.8 V DC

12 V DC

9.6 V DC

1.2 V DC

360 mW

400

14.4 V DC

24 V DC

19.2 V DC

2.4 V DC

360 mW

1,600

28.8 V DC

HA1-AC6V HA1E-AC6V HA1-AC12V HA1E-AC12V HA1-AC24V HA1E-AC24V HA1-AC48V HA1E-AC48V HA1-AC115V HA1E-AC115V HA1-DC5V HA1E-DC5V HA1-DC6V HA1E-DC6V HA1-DC9V HA1E-DC9V HA1-DC12V HA1E-DC12V HA1-DC24V HA1E-DC24V

Note: The range of coil current — AC type: ±15% at 60 Hz, DC type: ±10% at 20°C 68°F coil temperature.

DIMENSIONS

mm inch PC board pattern (Copper-side view)

HA1

HA1E

HA1 1 Relay outline

16.4 .646

5-1.2 dia. 5-.047 dia. 1.34 .053

17.7 .697

0.5 .020 4 .157 0.6 dia. .024 dia.

3.2 .126 26.3 1.035

9.1 .358 4 .157 0.8 .031 1.3 .051

0.6 dia. .024 dia.

6.5 .256 11.6 .457 14 .551

0.6 dia. .024 dia.

0.9 dia. .035 dia.

19.1 .752 24.2 .953

General tolerance: ±0.5 ±.020

9.0 .354

4.8 .189

17 .669

HA1E

26.6 1.047 6.5 .256 11.5 .453 14.2 .559

3.9 .154

0.8 .031 1.5 .059

0.5 4.8 .020 .189

0.6 dia. .024 dia.

General tolerance: ±0.5 ±.004

14.0 .551

2.54×2 .100×2

2.54×7 .100×7 26.3 1.035 Relay outline

5-1.2 dia. 5-.047 dia. 1.5 .059

2.54×2 .100×2

2.54×7 .100×7 26.5 1.043

Tolerance: ±0.1 ±.004 Schematic (Bottom view) 1

5 4

6.5 .256

6.5 .256 14.2 .559

0.9 dia. .035 dia.

19.2 .756 24.3 .957

HA REFERENCE DATA 1.-(1) Coil temperature rise (AC PC board type)

1.-(2) Coil temperature rise (DC PC board type)

Point measured: Inside the coil

50 50 Hz 3 A

50 Hz deactivated

50 60 Hz 3 A 40

60 Hz deactivated

Temperature rise, °C

Contact activated: 3 A

30 Contact activated: 0 A

20 10

100 110 Coil applied voltage, %V

100 120 150 Coil applied voltage, %V

Operate and release time Sample: HA1-DC12V

Sample: HA1-AC115V Operate time Release time

Operate time Release time 20

15 Max. x

Min. Max. x Min.

5 0

100

120

Coil applied voltage, %V

Time, ms

Max. x

Min. 10 Max. x Min.

5 0

100

120

Coil applied voltage, %V

For Cautions for Use, see Relay Technical Information.

210

HY NON-POLARIZED 1 FORM C RELAY

FEATURES

7.4 .291

12 .472

HY RELAYS

• High sensitivity: 150 mW/200 mW • A wide range of ambient temperature: –40°C to +70°C –40°F to +158°F • Sealed construction • Rating: 1 A 30 V DC

10.1 .398

mm inch

SPECIFICATIONS Contact

Characteristics (at 25°C 77°F, 50% Relative humidity)

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Max. switching power Rating Max. switching voltage (resistive) Max. switching current Max. carrying current Mechanical (at 180 cpm) Expected life Electrical (at 20 cpm) (min. operations) 1 A 30 V DC

1 Form C

Max. operating speed Between contacts Initial insulation Between contact and resistance*1 coil

100 mΩ Gold-clad silver 1 A 30 V DC 30 W 60 V DC 1A 2A 107

Between open contacts Between contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Temperature rise at nominal voltage Contact carrying current 1 A at 20°C Functional*4 Shock resistance Destructive*5

Initial breakdown voltage*2

105

Coil Nominal operating power

Standard type High sensitivity type

200 mW 150 mW

1,000 Vrms Max. 5 ms (approx. 2 ms) Max. 4 ms (approx. 1 ms) Max. 50°C

Humidity

5 to 85% R.H.

Destructive Conditions for operation, transport and storage*7 (Not freezing and condensing at low temperature) Unit weight

500 Vrms

Ambient temp.

Vibration resistance

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

Min. 100 MΩ at 500 V DC

Min. 98 m/s2 (10 G) Min. 980 m/s2 (100 G) 58.8 m/s2 {6 G}, 10 to 55 Hz at double amplitude of 1 mm 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm –40°C to +70°C –40°F to +158°F

Functional*6

Remarks

20 cpm (at nominal voltage) Min. 100 MΩ at 500 V DC

1.8 g .063 oz

TYPICAL APPLICATIONS • Low-voltage signal switching and motor control of small home appliances such as portable video tape recorders and audio devices.

• Automotive: Switching to small motor 1) Automirrow controller 2)Retractable head light controller • Push button device: Dial pulsing

• Operating of dish-control motors for PCs and word processors

ORDERING INFORMATION Ex. HY

Contact arrangement

Sensitivity

Coil voltage (DC)

1: 1 Form C

Nil: High sensitivity 150 mW Z: Standard 200 mW

1.5, 3, 4.5, 5, 6, 9, 12, 24 V

HY TYPES AND COIL DATA (at 20°C 68°F) 200 mW Standard type Part No.

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

HY1Z-1.5V HY1Z-3V HY1Z-4.5V HY1Z-5V HY1Z-6V HY1Z-9V HY1Z-12V HY1Z-24V

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.375 3.75 4.5 6.75 9 18

Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Coil resistance, Ω (±10%) 11.25 45 101.2 125 180 405 720 2,880

Nominal operating current, mA 133.3 66.7 44.5 40 33.3 22.2 16.7 8.3

Nominal operating power, mW 200 200 200 200 200 200 200 200

Max. allowable voltage, V DC (at 70°C 158°F) 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Nominal operating current, mA 100 50 33.3 30.1 25 16.7 12.5 6.25

Nominal operating power, mW 150 150 150 150 150 150 150 150

Max. allowable voltage, V DC (at 70°C 158°F) 2.1 4.2 6.3 7 8.4 12.6 16.8 33.6

150 mW High sensitivity type Part No.

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.375 3.75 4.5 6.75 9 18

HY1-1.5V HY1-3V HY1-4.5V HY1-5V HY1-6V HY1-9V HY1-12V HY1-24V

Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Coil resistance, Ω (±10%) 15 60 135 166 240 540 960 3,840

DIMENSIONS

mm inch PC board pattern (Copper-side view) 2.54 .100

7.62 .300

(0.82) (.032)

12 .462

7.4 .291

10.1 .398

6-1 dia. 6-.039 dia.

5.08 .200

0.5 .020

2.54 .100

3.5 .138 0.5 .020

5.08 .200

0.25 .010

2.54 .100

0.4 dia. .016 dia. 2.54 .100

0.25 .010

7.62 .300

Schematic (Bottom view) N.C.

(0.82) (.032)

COM

N.O.

General tolerance: ±0.3 ±.012

Tolerance: ±0.1 ±.004

REFERENCE DATA 1. Maximum switching power

2. Life curve

3. Mechanical life

5.0

2.0

300 200

30 V DC resistive load

100 Life, ×104

Contact current, A

DC resistive AC resistive

1.0

50 30 20 10

0.5

100 V AC resistive load

0.2

Ratio against the rated voltage, %V

Tested sample: HY1Z-12V, 10 pcs. Ambient temperature: 20°C to 25°C 68°F to 77°F 100 90 80 70 Pick-up voltage

Max.

Min.

40 Drop-out voltage

Max.

20 Min.

10 0.1 10

60 100 300 Contact voltage, V

0.2

0.4

0.6 0.8 1.0 1.2 1.4 Switching current, A

100 1,000 2,000 No. of operations, ×104

HY 4. Electrical life Change of pick-up and drop-out voltage

N.C. side: 3 pcs. N.O. side: 3 pcs.

90 Pick-up voltage

80 70

Max.

60 Min.

50 40

Drop-out voltage

Max.

Min.

10 4 No. of operations, ×10

5-(1). Coil temperature rise (150 mW high sensitivity type)

5-(2). Coil temperature rise (200 mW Standard type)

Tested sample: HY1-9V, 5 pcs. Ambient temperature:24°C 75°F

Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 23°C 74°F

60 50

40 30

Coil temperature rise, °C

100

Coil temperature rise, °C

100

Min. 20

40 30

120 140 160 180 Coil applied voltage, %V

10 20 No. of operations, × 104

Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 25°C 77°F

6. Operate/release time characteristics

100

10 80

Max.

10 0

100

120 140 160 180 Coil applied voltage, %V

Operate/release time, ms

Circuit:

Change of contact resistance

100 Contact resistance, mΩ

Ratio against the rated voltage, %V

Tested sample: HY1-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 30 cpm

Operate time 2

Release time

100 120 Coil applied voltage, %V

7. Distribution of pick-up and drop-out voltages

8. Distribution of contact resistance

9. Malfunction shock

Tested sample: HY1-12V, 50 pcs. Ambient temperature: 23°C 74°F

Tested sample: HY1-12V, 50 pcs. N.C. side N.O. side

Tested sample: HY1Z-12V, 6 pcs.

30 Drop-out voltage

20 Pick-up voltage 15

Y Z X X’ Z’ 980m/s 2 Y Y’ 980m/s 2 X

980m/s 2 Z’

Z 980m/s 2

980m/s 2 X’

980m/s 2 Y’ 30

40 Contact resistance mΩ

NOTE Soldering and cleaning HY relays have the sealed construction. It is possible to do automatic soldering and automatic cleaning, but avoid the ultrasonic cleaning.

Deenergized condition Energized condition

10 20 30 40 50 60 70 80 90 100 Pick-up/drop-out voltage, V

N.C. side N.O. side

Quantity

Max. x Min. Max. x Min.

For cleaning, it is recommended that a fluorinated hydrocarbon or other alcoholic solvent be used.

For Cautions for Use, see Relay Technical Information

CSA pending

NF-RELAYS

FLATPACK RELAY

FEATURES 30.2 1.189

1. Flatpack 2. Long seller

20.0 .787 10.8 .425

mm inch

SPECIFICATIONS Characteristics (at 25°C 77°F, 50% R.H. seal level)

Contacts Arrangement

2 Form C, 4 Form C 50 mΩ 25 mΩ Gold-clad silver Gold-clad silver 60 W 100 VA 220 V AC, DC 2A 108

Max. Typical Movable contact Stationary contact Max. switching power Max. switching voltage Max. switching current Mechanical

Initial contact resistance (By voltage drop 6 V DC 1 A) Contact material Rating, (resistive load)

Expected life (min. operations) 1].

Electrical (Resistive)

2 A 30 V DC 1 A 30 V DC 0.5 A 30 V DC

2 × 105 106 107

MBB types available: 2MBB & 4MBB (See next page for contact positions.)

Max. operating speed Initial insulation resistance*1 Contact/Contact Electrostatic Contact/Coil capacitance Contact/Ground Between open contacts Initial Between contact sets breakdown Between live parts and ground voltage*2 Between contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Contact bounce

Coil Nominal operating power, at 25°C

2C 4C

Approx. 300 mW Approx. 480 mW Approx. 1 W at 40°C 104°F

Max. operating power for continuous duty

Shock resistance

Functional*

In de-energized condition In energized condition

Destructive*5

Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10 mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.

Vibration resistance

Functional*6

In de-energized condition

In energized condition Destructive Conditions for operation, Ambient temp. transport and storage*7 (Not freezing and condensHumidity ing at low temperature) 2C Unit weight 4C

TYPICAL APPLICATIONS NF relays are widely acceptable in applications where small size and high sensitivity are required. Such applications include: Electronic equipment, Household applications,

Alarm systems, Office machines, Communication equipment, Measuring equipment, Remote control systems, General control circuits, Machine tools, Industrial machinery, etc.

50 cps 1,000 MΩ at 500 V DC Approx. 4 pF Approx. 7 pF Approx. 6 pF 750 Vrms 1,000 Vrms 1,000 Vrms 1,000 Vrms Max. 15 ms (Approx. 10 ms) Max. 10 ms (Approx. 3 ms) Approx. 1.5 ms Min. 29.4 m/s2 {3 G} (In contact direction) Min. 98 m/s2 {10 G} (perpendicular to contact) Min. 196 m/s2 {20 G} Min. 980 m/s2 {100 G} 29.4 m/s2 {3 G}, 10 to 55 Hz at double amplitude of 0.5 mm (in contact direction) 98 m/s2 {10 G}10 to 55 Hz at double amplitude of 1.6 mm (perpendicular to contact) 117.6 m/s2 {12 G}10 to 55 Hz at double amplitude of 2 mm 196 m/s2 {20 G}, 10 to 55 Hz at double amplitude of 3.3 mm –40°C to + 65°C –40°F to +149°F 5 to 85%R.H. Approx. 14 g .49 oz Approx. 15.5 g .55 oz

NF ORDERING INFORMATION Ex. NF

48V

Contact arrangement

Type classification

MBB function

Coil voltage (DC)

Contact metarial

2: 2 Form C 4: 4 Form C

EB: Standard

Nil: Form C type 2M: 2MBB (2 Form D) 4M: 4MBB (4 Form D)

5, 6, 12, 24, 48 V

Nil: Gold-clad silver 1: Gold-cap over silver palladium

(Notes) 1. For VDE recognized types, add suffix VDE. (Notes) 2. For UL/CSA recognized type, add suffix-A, as NF2EB-12V-A whose ground terminal is cut off. (Notes) 3. Standard packing Carton: 20 pcs.; Case: 200 pcs.

TYPES AND COIL DATA (at 25°C 77°F) Part No.

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

Max. allowable voltage, V DC (at 40°C)

Coil resistance,* Ω

NF2EB-5V NF2EB-6V NF2EB-12V NF2EB-24V NF2EB-48V NF4EB-5V NF4EB-6V NF4EB-12V NF4EB-24V NF4EB-48V

5 6 12 24 48 5 6 12 24 48

4.0 4.8 9.6 19.2 38.4 4.0 4.8 9.6 19.2 38.4

0.5 0.6 1.2 2.4 4.8 0.5 0.6 1.2 2.4 4.8

8.7 10.5 21 42 84 7 8.5 17.0 34 68

90 137 500 2,000 7,000 53 90 330 1,200 4,200

*Less than 1,000 Ω: ±10% *More than 1,000 Ω: ±15% Inductance, H Nominal operating power, Armarure mW Open Close 278 0.071 0.071 260 0.093 0.094 290 0.338 0.344 290 1.29 1.31 330 4.12 4.18 472 0.029 0.029 400 0.070 0.071 440 0.22 0.23 480 0.77 0.79 550 2.22 2.25

DIMENSIONS

mm inch

2 Form C

PC board pattern (Copper-side view)

10.8±0.3 .425±.012 0.3 .012

1.13 .044

3.3 .130

N.O. N.C. Ground terminal

Common terminal Coil terminal

1.13 .044

6 3

(2.54) (.100)

5.1±0.2 .2±.008

7 4

8 5

13 20 .512 .787

Resin rise max. 0.5 max. .020

1.3 +0 –0.3 .051 DIA. +0 –.012

4.9 .193

4-0.8 dia. .031 dia. Stand-off

Schematic

30.2 1.189 20.6 .811

4.9 .193

Terminal dimensions (except soldering) Width: 0.8 .031 Thickness: 0.3 .012

Relay outline

(2.54) (.100) 12.7±0.2 7.6±0.2 .5±.008 7.6±0.2 .3±.008 .3±.008

MBB contact position NF2-2M: terminal 6-7-8, 3-4-5

4 Form C PC board pattern (Copper-side view) 1.3 +0 –0.3 .051 DIA. +0 –.012

1.13 .044

2.1 .083

4 10 7 13

1.13 .044

N.O. N.C. Ground terminal

Common terminal Coil terminal

(2.54) (.100)

5.1±0.2 .2±.008

9 6

5 13.6 24.6 .535 .969

Resin rise max. 0.5 max. .020 3.3 .130

11 8

4-0.8 dia. .031 dia. Stand-off

Schematic

30.2 1.189 20.6 .811

10.8±0.3 .425±.012 0.3 .012

2.1 .083 Terminal dimensions (except soldering) Width: 0.8 .031 Thickness: 0.3 .012 MBB contact position NF4-2M: terminals 6-7-8, 9-10-11 NF4-2M: terminals 6-7-8, 3-4-5, 12-13-14, 9-10-11

General tolerance: ±0.5 ±.020 (Except for the cover height)

Relay outline

(2.54) (.100) 12.7±0.2 7.6±0.2 .5±.008 7.6±0.2 .3±.008 .3±.008

NF REFERENCE DATA 1. Life curve

2. Coil temperature rise (resistance method)

3. H2S gas test Gas density: 2 to 5 ppm Temperature: 40°C Humidity: 90%

Coil temperature rise, °C

1,000

30 V DC Resistive

100

50Ω Contact resistance

No. of operations, ×104

100Ω

10Ω 5Ω 1Ω

500mΩ 20

Sealed NFEB relay

100mΩ 50mΩ

10 0.5

1.5

0.2 0.4 0.6 0.8 1.0 1.2 1.4

2.5

Load current, A

4. Contact reliability Test conditions:

5. High temperature test Test conditions:

1. Contact current/voltage: 10 µA 100 mV 1 kHz 2. Cycle rate 20 cps. 3. Miscontact detection level: 1 mW (= 100 Ω) 4. Detection method: Observation of all changeover contacts

Ambient temperature: 80°C ±2°C

Test method:

Test result:

1. All contacts were switched for 100 operations on 2 A 30 V DC resistive load. 2. Samples then were exposed to 80°C temperature for 5,000 hours, continuous 3. Contact resistance was measured with HewlettPackard testing equipment.

Amber relays showed a stable spread of contact resistance within the initially specified 50 mΩ after 5,000 hours exposure.

70 Contact resistance, mΩ

F(t)(%) 99.9 99.0 95.0 90.0 80.0 60.0 70.0 50.0 40.0 30.0 25.0 20.0 15.0 10.0 5.0 4.0 3.0 2.0 1.5 1.0 0.5 0.4 0.3 0.2 0.15 0.1 0.1

20 50 100 200 1,000 500 2,000 Exposure time, hrs

Operating power, W

60 50 40 N.C. contacts 30 20

N.O. contacts

Max. Min. Max. Min.

10 0.5 1.0 5.0 10.0 50 100 No. of operations, ×106

100 200 300 400 500 1,000 5,000 3,000 Exposure, hrs.

Test result: m = 1.5 µ = 21.2 × 106 95% confidence level = 3.1 × 106 17 contacts out of 20 achieved 10 million no miscontact operations.

NOTES 1. Prevention of vibration and shock To reduce the likelihood of vibration and shock, we recommend that you install so that the contact action is not in the direction of gravity. Top Common terminal Coil terminal

NC terminal

NO terminal Bottom

For Cautions for Use, see Relay Technical Information. 200

6PDT FLATPACK 2AMP DIL RELAY

NL-RELAYS

FEATURES 32.4 1.276

• Space saving dimensions — 25.4 mm × 32.4 mm × 10.9 mm 1.000 inch× 1.276 inch× 0.429 inch • Latching types available • Low operating power — 400 mW (single side stable) Transistor compatible • High breakdown voltage for transient protection — 1,000 Vrms between open contacts, contact sets, and 1,500 V FCC surge between open contacts • Soldering flux inflow completely prevented

25.4 1.000 10.9 .429

NLE Amber Relays

mm inch

SPECIFICATIONS Contacts

Characteristics

Arrangement**1 Contact material Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Rating (resistive)

Expected life (min. operations)

5×105 106

Minimum set and reset power Nominal set and reset power

Max. 15 ms (Approx. 10 ms) Max. 10 ms (Approx. 5 ms)

Ambient temp.

Max. 65°C with nominal coil voltage and at switching current 2 A Min. 147 m/s2 {15 G} Min. 980 m/s2 {100 G} 58.8 m/s2 {6 G}, 10 to 55 Hz at double amplitude of 1 mm 117.6 m/ s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm –40°C to +55°C –40°F to +131°F

Humidity

5 to 85% R.H.

Temperature rise Functional*4 Destructive*5

Shock resistance

Coil (polarized) (at 25°C 77°F) Nominal operating power

2,000 Vrms

Release time (without diode)*3 (at nominal voltage)

**1 MBB contact types also available: 2 MBB, 4 MBB & 6 MBB **2 Gold capped silver-palladium contact also available

Minimum operating power

1,000 Vrms

Breakdown voltage*2

2 A 30 V DC 60 VA, 60 W 125 V AC, 30 V DC 2A 5×107

2 A 30 V DC 0.6 A 100 V DC

50 cps Min. 100 MΩ at 500 V DC

Between open contacts, contact sets Between contacts and coil Operate time*3 (at nominal voltage)

100 mΩ

Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Mechanical Electrical (resistive)

Maximum operating speed Initial insulation resistance*1

6 Form C gold-clad silver**2

Functional*6

Approx. 460 mW up to 60 V DC: Approx. 720 mW 110 V DC: Approx. 900 mW Approx. 1,000 mW Approx. 1,600 mW

Vibration resistance Destructive Conditions for operation, transport and storage*7 (Not freezing and condensing at low temperature) Unit weight

Approx. 17 g.60 oz

TYPICAL APPLICATIONS Telecommunications, security equipment, detection systems.

ORDERING INFORMATION Ex.

Contact arrangement 6: 6 Form C

Classification of type

MBB function

EB: Amber sealed type Nil: 6 Form C

DC48V

Operating function

Coil voltage

Contact material

Nil: Single side Nil: stable L2: 2 coil latching

DC: 5, 6, 12, 24, 48, 60, 110 V

Nil: Gold-clad silver

1: Gold-cap over 1: silver palladium

NL TYPES AND COIL DATA (at 20°C 68°F) Single side stable

2 coil latching Coil voltage, V DC

Part No.

Pick-up (max.)

NL6EBX-DC5V NL6EBX-DC6V NL6EBX-DC12V NL6EBX-DC24V NL6EBX-DC48V NL6EBX-DC60V NL6EBX-DC110V

4.0 4.8 9.6 19.2 38.4 48 88

Coil voltage,* V DC

Nominal Coil operating resistance, Drop-out Maximum power, (min.) allowable Ω (±10%) mW 0.5 6.0 34.7 0.6 7.2 50 1.2 14.4 200 720 2.4 28.8 800 4.8 57.6 3,200 6.0 72 5,000 11.0 132 13,467 898

Part No. NL6EBX-L2-DC5V NL6EBX-L2-DC6V NL6EBX-L2-DC12V NL6EBX-L2-DC24V NL6EBX-L2-DC48V NL6EBX-L2-DC60V NL6EBX-L2-DC110V

Set (max.)

Reset (max.)

4.0 4.8 9.6 19.2 38.4 48 88

Nominal Coil operating resistance, Maximum power, allowable Ω (±10%) mW 5.5 15.6 6.6 22.5 13.2 90 1,600** 26.4 360 52.8 1,440 66 2,250 121 7,563

* See NOTE 2 ** Two coil latching series are for intermittent operation only. Power should be applied to coil continuously for no more than two minutes.

DIMENSIONS

mm inch

Single side stable

2 coil latching PC board pattern (Bottom view)

2.54 2.54 .100 5.08 .100 .200

2.54 .100 11 12 13 14 15 16

25.4 1.000

2.54 .100 11 12 13 14 15 16

2.54×11 .100×11

10 9 8

3.5 .138

10.9 .429

2.54 .100

17 18 19 20 21 22

27.94 1.100

32.4 1.276

PC board pattern (Bottom view)

2.54 2.54 .100 5.08 .100 .200

25.4 1.000

10 9 8 7 6

10.9 .429

5 4 3 2 1

22-1.2 DIA HOLES 22-.047 DIA HOLES

Schematic (Top view)

16 15 14 13 12 11

5.08 2.54 .200 2.54 .100 .100

2.54 5.08 2.54 .100 .200 .100

3.5 .138

32.4 1.276

Schematic (Top view) 22 21 20 19 18 17

2.54×11 .100×11

27.94 1.100

3 2 1

20-1.2 DIA HOLES 20-.047 DIA HOLES

2.54 .100

17 18 19 20 21 22

9 10

22 21 20 19 18 17

16 15 14 13 12 11

9 10

General tolerance: ±0.3 ±.012

REFERENCE DATA 1. Electrical life (2 A 30 V DC resistive load)

2. Coil temperature rise

Pick-up voltage Max. Min.

Drop-out voltage Max. Min.

100

No. of operations, ×104

N.C. contact N.O. contact

70 Max. Max.

60 50 40

Min.

30 20

Temperature rise, °C

Contact resistance, mΩ

Pick-up/drop-out voltage, V

2 A carrying

50 No load

10 0

100

No. of operations, ×104

100

110 Coil applied voltage,%V

NOTES On two coil latching relays 1. To maintain insulation between coils, terminals 6 and 7 should be connected to provide common return. 6

Latch coil 5

Latch switch

2. Two coil latching relays are for intermittent operation only. Power should be applied to coils for no more than two minutes; continuous operation may burn out the coils.

3. Position of MBB contacts 2M (2 Form D 4 Form C): 1-21-22, 10-11-12 4M (4 Form D 2 Form C): 1-21-22, 2-20-18, 9-13-15, 10-11-12

Reset coil 4

Reset switch

LONG LIFE RELAY

CSA

pending

NR-RELAYS

FEATURES 20 .787

• Sealed construction for automatic wave soldering and cleaning • Latching types available • High sensitivity — TTL direct drive possible • High speed — Up to 500 cycle/sec. operations • Wide switching range and high welding resistance Gold cobalt (AuCo) contact permits • Wider switching range from low level up to high current: 10 µA to 1 A • Higher sticking resistance to inrush current • Stable contact resistance from initial stage throughout life

10 .394 10 .394

mm inch

SPECIFICATIONS Characteristics (at 25°C 77°F)

Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Initial contact pressure Contact material Sealed type ContactMagnetically Contact sealed type Sealed type N.O. Magnetically Electrostatic contact-coil sealed type capacitance Sealed type N.C. contact-coil Magnetically sealed type

1 Form C 60 mΩ Approx. 5 g .18 oz Gold cobalt 3 pF 4 pF 4 pF 5 pF 5 pF 6 pF 1A 20 VDC, 0.3A 110 VAC

Nominal switching capacity

Rating (resistive)

Expected life (min. operations)

Max. switching power Max. switching voltage Max. switching current Min. switching power Mechanical (at 500 cps.) 1 A 20 V DC/ 0.3 A 110 V AC 0.5 A 30 V DC/ 0.1 A 110 V AC 0.25 A 30 V DC/ 0.25 A 30 V AC Electrical (resistive) 0.2 A 24 V DC/ 0.2 A 24 V AC 0.1 A 12 V DC/ 0.1 A 12 V AC 0.1 A 9 V DC/ 0.1 A 9 V AC

33 VA, 20 W 110 V AC, 30 V DC AC 0.3 A, DC 1 A Approx. 100 mV 10µA 109 106 (at 1 cps.) 3×106 (at 2 cps.) 5×106 (at 5 cps.) 107 (at 25 cps.) 5×107 (at 50 cps.) 108 (at 100 cps.)

Coil (polarized) (at 25°C 77°F) Minimum operting power

Nominal operating power

Single side stable 1 coil latching 2 coil latching Single side stable 1 coil latching 2 coil latching

72 to 133 mW 41 to 45 mW 72 to 107 mW 147 to 300 mW 74 to 153 mW 147 to 331 mW

Max. operating speed Initial insulation resistance*1

500 cps. (mechanical) Min. 1000 MΩ at 500 V DC*2

Between live parts and ground Initial Between open breakdown contact voltage*3 Between contact and coil Operate time*4 (at nominal voltage) Release time (without diode)*4 (at nominal voltage) Contact Single side stable bounce 1-coil /2-coil latching time Temperature rise Shock resistance

Vibration resistance

Functional*5 Destructive*6 Functional*7 Destructive

1,000 Vrms 350 Vrms (500 V DC) 1,000 Vrms Max. 3 ms (Approx. 1 ms) Max. 2 ms (Approx. 0.5 ms) Approx. 0.5 ms Approx. 0.3 ms Max. 35°C at 0.5 W operating power Max. 65°C at 1 W operating power Min. 980 m/s2 {100 G} Min. 980 m/s2 {100 G} 98 m/s2 {10 G}, 10 to 55 Hz at double amplitude of 1.6 mm*8 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm

Conditions for opera- Ambient tion, transport and temp. storage*9 (Not freezing and condensing Humidity at low temperature) Unit weight

–55°C to +65°C*10 –67°F to +149°F 5 to 85% R.H. Approx. 7 g .25 oz

Remarks * *1 *2 *3 *4 *5 *6 *7 *8

*9 *10

Specifications will vary with foreign standards certification ratings. Measurement at same location as "Initial breakdown voltage" section Min. 500MΩ at 100 V DC between coils of 2 coil latching type Detection current: 10mA, Except for between coils of 2 coil latching type Excluding contact bounce time Half-wave pulse of sine wave: 6ms; detection time: 10µs Half-wave pulse of sine wave: 6ms Detection time: 10µs Although NR relays are rated at 10 G/55 cps. vibration resistance, they will withstand up to 60 G/2,000 cps., provided they receive additional support such as anchoring to the PC board with epoxy resin. Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT Total temperature (ambient temperature plus temperature rise in coil) should not exceed 90°C 194°F for single side stable, and 105°C 221°F for latching relays. See Reference Data for determination of coil voltage versus temperature.

NR TYPICAL APPLICATIONS Telecommunications equipment, alarm devices, machine tools, NC machines, automatic warehouse control, conveyors, air-conditioners, pressing machines, tex-

tile machinery, elevators, control panels, pin-board programmers, parking meters, industrial robots, detectors, annunciators, optical instruments, business machines,

time recorders, cash registers, copiers, vending machines, medical equipment.

ORDERING INFORMATION EX. NR-

12V

Types of case

Operating function

Coil voltage (DC)

H: Sealed S: Magnetically sealed

Nil: Single side stable L: 1 coil latching L2: 2 coil latching

5, 6, 12, 24, 42 V

(Notes) 1. Power types and 1 Form A types are available on request. (Notes) 2. For UL/CSA recognized types, delete “N” at head portion of part No. and add suffix UL/CSA, when ordering. Ex. RSD-12V UL/CSA (Notes) 3. Standard packing Carton: 50 pcs., Case: 500 pcs.

TYPES AND COIL DATA (at 25°C 77°F) Single side stable (NR-SD) Nominal coil voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage V DC (min.)

5 6 12 24 42

3.5 4.7 9.3 16 28

0.5 0.6 1.2 2.4 4.2

Maximum allowable voltage, V DC (40°C 104°F) 13 14 28 42 85

Coil resistance, Ω (±10%)

Nominal operating power, mW

Inductance, Henrys

170 220 890 2,000 8,000

147 164 162 288 221

0.050 0.075 0.3 0.66 2.7

1 coil latching (NR-SLD) Nominal coil voltage, V DC

Pick-up voltage, V DC (max.)

Maximum allowable voltage, V DC (40°C 104°F)

Coil resistance, Ω (±10%)

Nominal operating power, mW

Inductance, Henrys

5 6 12 24 42

3.5 4.3 8.0 17 23

18 20 30 75 110

340 450 1,500 6,000 12,000

74 80 96 96 147

0.12 0.16 0.66 2.4 3.9

Nominal coil voltage, V DC

Pick-up voltage, V DC (max.)

Maximum allowable voltage, V DC (40°C 104°F)

Nominal operating power, mW

Inductance, Henrys

5 6 12 24 42

3.5 4.3 8.0 17.0 23.0

13.0 14.0 26.0 50.0 75.0

Coil resistance, Ω (±10%) Set coil Reset coil 170 170 225 225 650 650 2,700 2,700 5,500 5,500

147 160 230 213 321

0.024 0.04 0.14 0.35 0.8

2 coil latching (NR-SL2D)

(Note) Maximum allowable operating power: 1000 mW at 25°C 77°F.

DIMENSIONS

mm inch

20 .787

10 .394

5 10 .394

2.54 .100

3 .118

2.54 5.1 5.1 5.1 .100 .201 .201 .201

5.1 .201

Terminal No. 1, 7

4 3 2.54

3.5 .138

Terminal dimensions (Except soldering)

Ground terminal

.100

2 1.3 DIA. .051 DIA.

4 2, 3, 5, 6, ground terminal

Thickness Width 0.5 0.6 .020 .024 0.3 0.7 .012 .028 0.5 DIA. .020 DIA.

Soldering: 0.3 .012 max.

General tolerance: ±0.5 ±.020

Tolerance: ±0.2 ±.008

NR DIFFERENCES BETWEEN NR RELAYS AND REED RELAYS "Getter" holes are formed on both pole shoes to obtain uniform contact resistance throughout life. Film-forming phenomena on contacts is thus fully prevented.

NR relays

Reed relays

1 Form C 20 W (high contact pressure) Single side stable Latching Yes

1 Form A or 1 Form B 5 to 15 W

Structure

Contact arrangement Contact capacity Operating function "Getter" hole

Single side stable No

REFERENCE DATA 1.-(2) Contact reliability TEST CONDITION

Test sample: NR-SD-24V 54 pcs. Circuits: (A) Following figure with diode (B) Following figure without diode

Stop

Start R0 24 V DC

R54

R0 R1

R1 R2

R52

R53

R53 R54

Item to be checked: Detect with the circuit stopped Circuits: (A) Diode provided: The circuit does not stop throughout 100 million times. (B) Diode not provided: λ60 = 2.5 × 10-8 times

2. Coil temperature rise (under saturated condition)

Sample: NR-SD-24V, 10 pcs. Contact voltage: 100 mV Contact current: 10µA Cycle rate: 50 cps. Detection level: 100 Ω Testing operation: 3×107 m = 1.9 σ = 2.5×107 µ = 4.7×107 95% reliability limit: 1.15×107 (Mean time between failure)

100 Coil temperature rise, °C

1.-(1) Contact reliability

F(t)(%) 99.9 99.0 95.0

90 80 70 60 50

Magnetically sealed type

40 Plastic sealed type

30 20 10 250

70.0 50.0 30.0

500

750

1,000 1,250

Operating power, mW

10.0 5.0 2.0 1.0 0.5 0.2 0.1

1 No. of operations, ×10

5 10 (WEIBULL)

3.-(2) Operate time including bounce time (2 coil latching)

4. Release time including bounce time (Single side stable)

3.0

2.5

2.0 1.5 Max.

1.0

Release time, ms

3.0

Operate time, ms

3.-(1) Operate time including bounce time (Single side stable)

2.0 1.5

2.0 1.5 1.0

1.0

Max.

x Min.

0.5 0

100

140

180

Max.

0.5

220

Coil applied voltage, %V

100

140

x Min. 180

0.5 x Min. 220

Coil applied voltage, %V

100

140

180

220

Coil applied voltage, %V

NR 5.-(1) Leaving at high temperature (Change of pick-up and drop-out voltages)

5.-(2) Leaving at high temperature (Change of contact resistance)

Tested sample: NR-SD-24V, 30 pcs. Condition: Deenergized leaving at 90°C 194°F (constant temperature)

SG(Signal generator)

1,000

B N.O.

Pick-up voltage

Max.

14 12

Min.

8 Drop out voltage

Max.

N.C. side contact N.O. side contact

N.C.

100

Min. Min.

4 Min.

1,000 Time, hr

100

1,500

1,000

–100 –50

10,000

7. Contact sticking resistance TEST CONDITION

100

Frequency, MHz

Time, hr

8. Distribution of contact resistance TEST RESULT

The purpose of this test was to confirm contact sticking resistance and contact stability against coil ripples. Tested Sample: NR-SD-24V, 10 pcs. Test method: Following coil ripples were applied. Test period: 500 hours 24 V DC 100 Hz 7 V DC

Tested sample: NR-SD-24V (WG type) 105 pcs.

No occurance of sticking was observed. Contact resistance: Fig. 1 NR-SD-24V: 29 mΩ to 30.4 mΩ Contact resistance mΩ

500

50Ω

Max.

x 2

50Ω

Isolation loss between A and B is measured.

Max.

x = 24.2 mΩ 3σ = 9.27 mΩ 50

100 Quantity

500

Isolation, dB

Contact resistance, mΩ

Voltage, V

6. High frequency characteristics Tested sample: NR-SD-24V Tested condition:

50 Max. x Min.

40 30 20

10 100 1,000 Energization time, Hr Fig. 1

In actual application, above coil ripples should be avoided and use of a capacitor in the circuit is recommended to keep the ripple factor below 5%.

9.-(1) Rate of change in pick-up and drop-out voltage (Single side stable)

9.-(2) Rate of change in pick-up voltage (2 coil latching)

Contact resistance, mΩ

10.-(1) Mechanical life (Change of pick-up and drop-out V) Tested Sample: NR-SD-24V, 10 pcs. Operation frequency: 500 cps

140 120 Pick-up voltage

100 80

160 140 120 100 Pick-up voltage

20 –40 –20 0 20 40 60 80 100 –30 –10 10 30 50 70 90 Ambient temperature, °C

Tested Sample: NR-SD-24V, 10 pcs. Operation frequency: 500 cps

Tested sample: NR-SD-24V, 10 pcs.

10.0 5.0

50 40

Max.

30 Min.

20 10

2.0 1.0 0.5 0.2 0.1

1,000

10,000

No. of operations, ×104

100,000

Drop-out Voltage 5

Max.

1,000

η: 1.85×106 µ: 1.65×106 σ: 5.64×104 (Weibull probability paper) 1

10,000

100,000

No. of operations, ×104

Contact resistance, mΩ

Min.

Tested Sample: NR-SD-24V, 10 pcs. Load: 60 mA 24 V DC resistive load Frequency: 50 cps

70.0 50.0 30.0

Max.

11.-(2) Electrical life

F(t)(%) 99.9 99.0 95.0

N.C. side N.O. side

Pick-up Voltage

–40 –20 0 20 40 60 80 100 –30 –10 10 30 50 70 90 Ambient temperature, °C

11.-(1) Electrical life (1 A 20 V DC resistive load)

Min.

10.-(2) Mechanical life (Change of contact resistance)

Pick-up/drop-out Voltage, V

180

Drop-out voltage

160

Rate of change, %

180

No. of operations, ×104

N.C. side N.O. side 150

100

1,000

No. of operations, ×104

1,0000

NR 11.-(3) Electrical life

11.-(4)Electrical life (327 mA 24 V DC relay coil load)

Tested Sample: NR-SD-12V, 10 pcs. Load: 54 mA 12 V DC inductive load with diode protection (4 relay coils in parallel of NR-SD-12V) Frequency: 50 cps

Tested sample: NR-SD-24V, 5 pcs. Condition: HP2-DC24×6 pcs. in parallel, diode protector provided NR relay contact

Max.

24 V DC

L1 12

Max. x Min.

8 Drop-out voltage Max. x Min.

Min. 1,000

10,000

No. of operations, ×10

100

200

Max. x

Min. 200

300

No. of operations, ×104

14. Influence of adjacent mounting

TEST RESULT Contact resistance: Fig. 1 All samples were measured less than 100 mΩ in contact resistance throughout this test.

mm inch

Distance 0 5 10 15 (0) (.197) (.394) (.591) Type Magnetically ±5% ±1% 0 0 shielded type Sealed type — ±10% ±6% ±2% 15. Resistive load test TEST CONDITION Tested Sample: NR-SD-24V, 10 pcs. Load: 1 A 20 V DC Resistive Cycle rate: 1.4 cps. Contact resistance in life test

100

Hour

500

N.C. N.O.

100 80

Max.

60 40

Max. Min.

20 10

1,000 2,000 100 Exposure time, hr

Contact resistance, mΩ

Thermal EMF, µV

100

Tested Sample: NR-SD-24V, 30 pcs. Ambient temperature: 80°C 176°F Humidity: less than 50% R.H. Exposure time: 2,000 hours with relays deenergized.

200

300

13. High temperature test TEST CONDITION

Tested Sample: NR-SD-12V, 5 pcs. Coil applied V: 12 V DC Ambient atmosphere: 25°C 77°F, 60% RH

L1~L6: HP2-DC24V × 6 pcs. in parallel Diode protector provided

100

No. of operations, ×104

12. Thermal electro motive force

Pick-up voltage Contact resistance, mΩ

100

Pick-up/drop-out voltage, V

Contact resistance, mΩ

1,000

N.C. N.O.

Max.

100

Max. Mean value of N.O. Mean value of N.C. Min. Min.

20 1

No. of operations, ×106

APPLICATION HINTS Contact protection circuit When using NR relays in inductive load circuits, a contact protection circuit is recommended. Examples: CR

CR Relay contact

Diode

r r

L c

L : Inductive load

1. r = more than 20 to 30 ohms 2. In an AC circuit impedance of L is to be somewhat smaller than impedance of r and c.

Can be used for both AC and DC circuits. Use 500 to 1000 ohms for r and 0.1 µF to 0.2 µF 200 V for c in a general 12 to 24 V load circuit.

For DC circuits only.

NR The following is life data under our HP2 relay load. Contact voltage 6 V DC 12 V DC 24 V DC 100 V DC 24 V DC 100 V DC 200 V DC

Contact current 232 mA 106 mA 54 mA 15 mA 80 mA 20 mA 10 mA

Contact protection circuit 0.2 µF + 1kΩ or diode 0.2 µF + 1kΩ or diode 0.1 µF + 1kΩ or diode 0.1 µF + 1kΩ or diode 0.2 µF + 1kΩ 0.1 µF + 1kΩ or varistor 0.1 µF + 1kΩ

Operating speed 2 op./s 2 op./s 2 op./s 2 op./s 2 op./s 2 op./s 2 op./s

Expected life, min. op. 3×107 3×107 3×107 2×107 3×107 2×107 2×107

(Notes) 1. When inrush current occurs in the capacitor load circuit or incandescent lamp load circuit, reduce it to less than 5 A. Electrical life of "AuCo" contact types is 10,000 operations in a 5 A inrush current circuit. 2. When 5 A to 10 A inrush current occurs in the capacitor load circuit or incandescent lamp load circuit, the use of power types is recommended.

2 coil latching types A) The circuit at right is recommended when using one coil for latching and the other coil for reset. NR relays are sensitive enough to be operated by the discharge of energy accumulated in the inner-coil capacitance. The use of a diode of over 200 V breakdown will prevent misoperation from this source. In order to maintain the insulation between the two coils, connection of the terminal No. 3 and No. 6 or the terminal No. 2 and No. 5 is recommended, as shown in the right figure.

Rectifiers should be inserted in this circuit when the nominal coil voltage of the NR relay is more than 24 V DC. B) No damage will occur to the coil of either the one or two coil latching types even if the operating voltage is as much as 2 or 3 times the nominal coil voltage. C) If separate pulses are applied to each coil of the 2 coil latching types, the first pulse will operate when the pulses are of equal voltage. When voltages differ the higher voltage will cause operation provided the voltage difference is greater

than the measured pick-up voltage. Voltage difference on the coils will reduce contact pressure proportionately. Continuous bias voltage after an operating pulse lowers contact pressure and vibration resistance.

Ripple factor Coils should be operated on pure DC. Rectified AC may cause changes in the

pick-up/drop-out characteristics because of the ripple factor. Use of a capacitor in

the circuit is recommended to keep the ripple factor below 5%.

Pulsating component

coil bias voltage

coil

To calculate the ripple factor

R : relay Ripple factor (%) = R

E min. E max. E mean

DC component

capacitor (ripple filter)

E max. – E min. × 100% E mean

E max. = max. value of pulsating component E min. = min. value of pulsating component E mean - average value DC component

When designing NR relay circuits Care should be taken when designing relay circuits since the response of the relay is so fast that bouncing or chattering from conventional relays in the circuit may cause false operation.

When using long lead wires When long wires (as long as 100 m or more) are to be used, the use of resistance (10 to 50 Ω) in series with the contact is required in order to eliminate the effect of the possible inrush current due to the stray capacitance existing between the two wires or between the wire and ground.

(Equivalent circuit) Contact of NR relay

10 to 50 Ω

Lead wire (100 to 300 m)

Energy accumulated in static capacitance

NR AC operation of latching relays When using circuits such as those at the right, avoid continued or extended latching or resetting power input.

Latching switch

Reset switch

Latching switch

Reset switch

1 coil bistable type

Capacitor discharge operation of latching types When operating latching types by discharge of a capacitor, more reliable operation can be expected if the time to reach pick-up voltage is greater than 2 ms at 5 to 10 ÂľF: (24 V type).

2 coil bistable type

(V)

Specified Pick - up voltage

NR relay coil

SW t more than 2 ms

NR relay contact

Flicker circuit

Automatic coil circuit interruption Misoperation may occur in self-operated cutoff circuits such as shown at right. This can be avoided by adding a resistor and capacitor and increasing the pick-up voltage to above that specified. In a timer circuit, step-pulse voltage from PUT (Programmable Unijunction Transistor) or SBS (Silicon Bilateral Switch) is recommended. Residual voltage When single side stable types or latching types are driven by transistor or UJT, residual voltage is sometimes applied to the

Coil voltage wave form

NR relay contact NR relay coil

T (Time)

coils and decreases contact pressure at N.O. side even if the transistor or UJT are in OFF condition. As a result, characteris-

Short circuit prevention between N.C. and N.O. The separation of loads or insertion of a resistor for circuit protection are recommended for the circuits where large current flows due to arcing. (See Fig. 1).

NR relay coil

tics of relays may be harmed. Design your circuits in principle to make such residual voltage zero.

Load separation

Load N.C.

Load

COM

N.C. COM

N.O.

Load Fig. 1

NR ACCESSORIES

mm inch

PC board terminal sockets (with hold-down clip) PC board pattern (Copper-side view) 10 .394

0.3 .012

9.9 .390 6.15 .242

20.9 .823 E 3

R-PS

5.0 .197

8-1.5 to 1.6 dia. 8-.059 to .063 dia.

2.4 .094 2.7 .106 7.4 .291

5 4.4 .173

Terminal width: 1.3 .051 Terminal thickness: 1.2 .047 General tolerance: ±0.5 ±.020

Tolerance: ±0.2 ±.008

For Cautions for Use, see Relay Technical Information.

119

SX (ASX) TESTING

HIGH SENSIBILITY RELAY WITH GUARANTEED LOW LEVEL SWITCHING CAPACITY

15.0 .591

FEATURES

7.4 .291 8.2 .323

15.0 .591

SX RELAYS (ASX)

7.4 .291 Max. 10.0 .394

1. High contact reliability over a long life has been made possible for low level loads. Using a low level load (1 mV 10µA to 10 V 10 mA) 107 operations were achieved with a static contact resistance of Max. 100 mΩ (voltage drop of 20 mV, 1 mA, 1 kHz) and a dynamic contact resistance of Max. 1 Ω (Measurement delay 10 ms, voltage drop of 20 mV, 1 mA, 1 kHz).

2. High sensibility of 50 mW By using the highly efficient polar magnetic circuit “seesaw balance armature mechanism”, a rated power consumption of 50 mW (for single side stable type) has been achieved. 3. Low thermal electromotive force Reducing the heat from the coil enables a thermal electromotive force of 3 µV or less.

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement Static contact resistance (During initial and electric life tests)*1 (By voltage drop of 20 mV 1 mA [1kHz]) Dynamic contact resistance (During initial and electric life tests)*1 (By voltage drop of 20 mV 1 mA[1 kHz], Measurement delay 10 ms after applying nominal coil voltage) Contact material Nominal switching capacity (resistive load) Max. switching power Rating Max. switching voltage Max. switching current Min. switching capacity**1 Single side stable Nominal operating power

1 coil latching 2 coil latching

Thermal electromotive force, max. (at nominal voltage applied to the coil**2) Mechanical (at 750 cpm) Expected life (min. Electrical (at 750 cpm) operations) (10 mA 10 V DC resistive load)

2 Form C Max. 100 mΩ

Max. 1 Ω

Gold-clad silver alloy 10 mA 10 VDC 0.1 W 10 VDC 10 mA DC 10 µA 1 mVDC 50mW (1.5 to 12 V DC) 70mW (24 V DC) 35mW (1.5 to 12 V DC) 50mW (24 V DC) 70mW (1.5 to 12 V DC) 150mW (24 V DC) 3 µV 5 × 107 107

Notes: **1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. 2 ** For single side stable only.

Initial insulation resistance*2 Initial breakdown voltage*3

Between open contacts Between contact sets Between contact and coil

Operate time [Set time]*4 (at 20°C) Release time (without diode) [Reset time]*4 (at 20°C) Temperature rise*5 (at 20°C) Functional*6 Shock resistance Destructive*7 Functional*8 Vibration resistance Destructive Conditions for operation, transport and storage*9 (Not freezing and condensing at low temperature) Unit weight

Ambient temperature Humidity

Min. 10,000MΩ (at 500V DC) 750 Vrms for 1min. 1,000 Vrms for 1min. 1,000 Vrms for 1min. Max. 5 ms (Approx. 3 ms) [Max. 5 ms (Approx. 3 ms)] Max. 5 ms (Approx. 1.5 ms) [Max. 5 ms (Approx. 3 ms)] Max. 50°C Min. 750 m/s2{75G] Min. 1,000 m/s2{100G] 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm –40°C to 70°C –40°F to 158°F 5 to 85% R.H. Approx. 2 g .071 oz

Remarks: * Specifications will vary with foreign standards certification ratings. *1 By nominal switching capacity: No. of operations: 107 *2 Measurement at same location as "Initial breakdown voltage" section. *3 Detection current: 10mA. *4 Nominal voltage applied to the coil, excluding contact bounce time. *5 By resistive method, nominal voltage applied to the coil; contact carrying current: 10mA. *6 Half-wave pulse of sine wave: 6 ms; detection time: 10µs. 7 * Half-wave pulse of sine wave: 6 ms. *8 Detection time: 10µs. *9 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

TYPICAL APPLICATIONS This relay will be used for the small load for measuring instruments or others where a stable contact resistance is required.

SX (ASX) ORDERING INFORMATION Ex. ASX

Type of operation

Contact arrangement Operating function 2: 2 Form C

0: Single side stable 1: 1 coil latching 2: 2 coil latching

0: Standard type (B.B.M.)

Terminal shape

Coil voltage (DC)

Nil: Standard PC board terminal A: Surface-mount terminal

1H: 1.5V 03 : 3V 4H: 4.5V 06 : 6V

09 : 9V 12 : 12V 24 : 24V

Packing style Nil: Tube packing Z: Tape and reel packing (piked from 8/9/10/12 pin side)

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available. Suffix “X” instead of “Z”.

TYPES AND COIL DATA (at 20°C 68°F) (1) Standard PC board terminal 1) Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. Single side stable Part No. Standard PC board terminal ASX2001H ASX20003 ASX2004H ASX20006 ASX20009 ASX20012 ASX20024

Coil Rating, V DC

Pick-up voltage, V DC (max.) (initial)

1.5 3 4.5 6 9 12 24

1.2 2.4 3.6 4.8 7.2 9.6 19.2

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.6 0.9 1.2 2.4

Coil Rating, V DC

Set voltage, V DC (max.) (initial)

1.5 3 4.5 6 9 12 24

Coil Rating, V DC

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

33.3 16.7 11.1 8.3 5.6 4.2 2.9

45 180 405 720 1,620 2,880 8,229

50 50 50 50 50 50 70

2.25 4.5 6.75 9 13.5 18 36

Reset voltage, V DC (max.) (initial)

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

1.2 2.4 3.6 4.8 7.2 9.6 19.2

23.3 11.7 7.8 5.8 3.9 2.9 2.1

64.3 257 579 1,029 2,314 4,114 11,520

35 35 35 35 35 35 50

2.25 4.5 6.75 9 13.5 18 36

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

1.2 2.4 3.6 4.8 7.2 9.6 19.2

1 coil latching Part No. Standard PC board terminal ASX2101H ASX21003 ASX2104H ASX21006 ASX21009 ASX21012 ASX21024

2 coil latching Part No. Standard PC board terminal ASX2201H ASX22003 ASX2204H ASX22006 ASX22009 ASX22012 ASX22024

1.5 3 4.5 6 9 12 24

Nominal operating current, mA (±10%) Reset Set coil coil 46.7 46.7 23.3 23.3 15.6 15.6 11.7 11.7 7.8 7.8 5.8 5.8 6.3 6.3

Coil resistance, Ω (±10%) Set coil 32.1 129 289 514 1,157 2,057 3,840

Reset coil 32.1 129 289 514 1,157 2,057 3,840

Nominal operating power, mW Reset Set coil coil 70 70 70 70 70 70 70 70 70 70 70 70 150 150

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 36

SX (ASX) (2) Surface-mount terminal 1) Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Tape and reel: 500 pcs.; Case: 1,000 pcs. 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. Single side stable Part No. Tube packing

Tape and reel packing

ASX200A1H ASX200A03 ASX200A4H ASX200A06 ASX200A09 ASX200A12 ASX200A24

ASX200A1HZ ASX200A03Z ASX200A4HZ ASX200A06Z ASX200A09Z ASX200A12Z ASX200A24Z

Pick-up voltage, V DC (max.) (initial) 1.2 2.4 3.6 4.8 7.2 9.6 19.2

Coil Rating, V DC 1.5 3 4.5 6 9 12 24

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 33.3 16.7 11.1 8.3 5.6 4.2 2.9

Reset voltage, V DC (max.) (initial) 1.2 2.4 3.6 4.8 7.2 9.6 19.2

Nominal operating current, mA (±10%) 23.3 11.7 7.8 5.8 3.9 2.9 2.1

Coil resistance, Ω (±10%) 45 180 405 720 1,620 2,880 8,229

Nominal operating power, mW 50 50 50 50 50 50 70

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 36

Nominal operating power, mW 35 35 35 35 35 35 50

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 36

1 coil latching type Part No. Tube packing

Tape and reel packing

ASX210A1H ASX210A03 ASX210A4H ASX210A06 ASX210A09 ASX210A12 ASX210A24

ASX210A1HZ ASX210A03Z ASX210A4HZ ASX210A06Z ASX210A09Z ASX210A12Z ASX210A24Z

Coil Rating, V DC

Set voltage, V DC (max.) (initial)

1.5 3 4.5 6 9 12 24

1.2 2.4 3.6 4.8 7.2 9.6 19.2

Coil resistance, Ω (±10%) 64.3 257 579 1,029 2,314 4,114 11,520

2 coil latching type Part No.

Tube packing ASX220A1H ASX220A03 ASX220A4H ASX220A06 ASX220A09 ASX220A12 ASX220A24

Coil Rating, V DC

Tape and reel packing ASX220A1HZ ASX220A03Z ASX220A4HZ ASX220A06Z ASX220A09Z ASX220A12Z ASX220A24Z

1.5 3 4.5 6 9 12 24

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

1.2 2.4 3.6 4.8 7.2 9.6 19.2

Nominal operating current, mA (±10%) Set Reset coil coil 46.7 46.7 23.3 23.3 15.6 15.6 11.7 11.7 7.8 7.8 5.8 5.8 6.3 6.3

Coil resistance, Ω (±10%) Set coil 32.1 129 289 514 1,157 2,057 3,840

Reset coil 32.1 129 289 514 1,157 2,057 3,840

Nominal operating power, mW Set Reset coil coil 70 70 70 70 70 70 70 70 70 70 70 70 150 150

Max. allowable voltage, V DC 2.25 4.5 6.75 9 13.5 18 36

DIMENSIONS

mm inch

1. PC board terminal

PC board pattern

Single side stable/ 1 coil latching

Single side stable (Deenergized condition)

7.4 .291

15.0 .591

2.54 .100

0.65 8.2 .026 .323

0.5 .020 1.15 .045

5.08 .200

2.54 .100

3.5 .138

Schematic (Bottom view)

10.16 .400

3 4 5

10 9 8

1 coil latching (Reset condition)

2 coil latching

0.25 .010

8-1.0 dia. 8-.039 dia.

5.08 .200

7.4 .291 2.54 .100

0.65 8.2 .026 .323 0.5 .020 1.15 .045

5.08 .200

2.54 .100

3.5 .138

General tolerance: ±0.3 ±.012

3 4 5

10 9 8

5.08 .200 Direction indication

Direction indication

2 coil latching (Reset condition) 15.0 .591

12.7 .500 5.08 .200

0.25 .010 5.08 .200

10-1.0 dia. 10-.039 dia.

Tolerance: ±0.1 ±.004

3 4 5 6

10 9 8 7

Direction indication

SX (ASX) 2. Surface-mount terminal

mm inch Suggested mounting pad 15.0 .591

7.4 .291

Single side stable/ 1 coil latching 0.5 .020 1.15 .045

5.08 .200

5.08 .200 1.0 .039

; ;;;;;;;;;;;;; ;;;;;;;;; ;;;;;;;; ;;;;;; ;

8.2 .323

Max.10.0 .394

0.65 .026 2.54 .100

Schematic (Top view) Single side stable (Deenergized condition)

0.25 .010

5.08 .200

10 9 8

3 4 5

10 9 8

3 4 5

2.54 .100

7.24 .285

3.16 .124

9.4±0.5 .370±.020

1 coil latching (Reset condition)

Direction indication

2 coil latching (Reset condition) 15.0 .591

7.4 .291

0.5 .020 1.15 .045

5.08 .200

Max.10.0 .394

0.65 .026 2.54 .100

1.0 .039 0.25 .010

5.08 .200

7.24 .285

3.16 .124

9.4±0.5 .370±.020

General tolerance: ±0.3 ±.012

10 9 8 7

3 4 5 6

2.54 .100

;;;;;;;; ;;;;;;;;;;; ;;;; ;;;;;;;;;;;;;;;; ;;

8.2 .323

2 coil latching

Direction indication

Tolerance: ±0.1 ±.004

REFERENCE DATA 2-(1). Change in dynamic contact resistance (10 mA 10 V DC resistive load)

2-(2). Change in dynamic contact resistance (10 µA 1 mV DC resistive load)

Tested: ASX20012, Quantity: n=10 Operating frequency: 750 cpm Measured condition: 10 ms after applying nominal coil voltage, using voltage drop of 20 mV, 1 mA, 1 kHz.

10mA

1.0

0.9

Contact resistance, Ω

Contact current

1. Switching capacity range

0.8 0.7 0.6 0.5 0.4 0.3

10V Contact voltage

Max. Min. 1,000

3-(2). Change in static contact resistance (10 µA 1 mV DC resistive load)

Tested: ASX20012, Quantity: n=10 Operating frequency: 750 cpm

0.4

0.1 0

100 N.C. side contact N.O. side contact

90 80 70 60 50

Max. Min. Max. Min.

40 30

Contact resistance, mΩ

100 Contact resistance, mΩ

0.5

No. of operations, × 104

3-(1). Change in static contact resistance (10 mA 10 V DC resistive load)

80 70 60 50

30 20 10

1,000 No. of operations, × 104

Max. Min. Max. Min.

10 0

N.C. side contact N.O. side contact

0.6

0.2

0.1 1mV

0.7

0.3

0.2 10µA

0.8

1,000

2,000

No. of operations, × 104

Max. Min. 1,000 2,000 4 No. of operations, × 10

SX (ASX) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.

;;

Orientation (indicates PIN No.1)stripe

Stopper (gray)

Stopper (green)

2) Tape and reel packing (1) Tape dimensions Relay polarity bar (Z type) 1.50 +0.1 0

dia. .059 +.003 .0 dia.

0.40±0.1 .016±.004

mm inch

4.0±0.1 .157±.004

1.75±0.1 .069±.004 2.0±0.1 .079±.004 15.5±0.1 .610±.004

Max. 20.0 .787

10.8±0.2 .425±.008

SX relays

16.0±0.1 .630±.004

10.0±0.1 .394±.004

24.0±0.3 .945±.012

11.5±0.1 .453±.004

Tape coming out direction

General tolerance ±0.1 mm .004 inch

(2) Dimensions of plastic reel

mm inch

21±0.8 dia. .827±.031 dia.

2.0±0.5 .079±.020 100±1 dia. 3.937±.039 dia. 370±2 dia. 14.567±.079 dia. 13±0.2 dia. .512±.008 dia. 24.4 +2 0 .961 +.079 0

2.0±0.2 .079±.008

For Cautions for Use, see Relay Technical Information

TK TESTING

ULTRA LOW PROFILE 2 A POLARIZED RELAY

10.6 .417

TK RELAYS

FEATURES

9.0 .354

• Low profile 4 mm .157 inch height • High contact capacity: 2 A • Surge withstand voltage between contact and coil: 2,500 V (Telcordia)

4.0 .157

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity (resistive load) Max. Switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1

1 Form C 50 mΩ Gold-clad silver alloy 2 A 30 V DC 60 W 220 V DC 2A 10 µA 10 mV DC 140 mW (1.5 to 12 V DC) 270 mW (24 V DC) 100 mW (1.5 to 12 V DC) 150 mW (24 V DC) 200 mW (1.5 to 9 V DC) 250 mW (12 V DC) 400 mW (24 V DC) 108 (Single side stable) 5 ×107 (1 or 2 coil latching)

Single side stable Nominal operating power

1 coil latching 2 coil latching

Expected life (min. operations)

Mechanical (at 180 cpm) Electrical (at 20 cpm)

Initial insulation resistance*1 Between open Initial contacts breakdown Between contact and voltage coil FCC surge voltage between open contacts (10×160 µs) Surge voltage between contacts and coil (2×10 µs) [Telcordia] Temperature rise*2 (at 20°C)

2 A 30 V DC resistive

Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) Functional*5 Shock resistance Destructive*6 Vibration resistance Conditions for operation, transport and storage*8 (Not freezing and condensing at low Unit weight

105

Note: ❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC])

Remarks

Functional*7 Destructive Ambient temperature*9 Humidity

ORDERING INFORMATION 1

1,500 V 2,500 V Max. 50°C Max. 3 ms (Approx. 1.5 ms) [Max. 3 ms (Approx. 1 ms)] Max. 2 ms (Approx. 1 ms) [Max. 3 ms (Approx. 1 ms)] Min. 750 m/s2 {75 G} Min. 1,000 m/s2 {100 G} 196 m/s2 {20G}, 10 to 55 Hz at double amplitude of 3.3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +85°C –40°F to +185°F 5 to 85% R.H. Approx. 1 g .035 oz.

*7 Detection time: 10 µs. *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT *9 The maximum ambient temperature allows for coil temperature rise at maximum allowable coil voltage. As for the applicable range of continuous carrying current against temperature, please refer to “Maximum value of continuous carrying current” chart.

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 2 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. 4 * Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms.

EX. TK

Min. 1,000 MΩ (at 500 V DC) 750 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA)

12V

Contact arrangement

Operating function

Terminal shape

Coil voltage (DC)

1: 1 Form C

Nil: Single side stable L: 1 coil latching L2: 2 coil latching

Nil: Standard PC board terminal H: Self-clinching terminal

1.5, 3, 4.5, 5, 6, 9, 12, 24V

TK TYPES AND COIL DATA (at 20°C 68°F) 1. Single side stable Part No.

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.38 3.75 4.5 6.75 9 18

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.38 3.75 4.5 6.75 9 18

Self-clinching terminal

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

TK1-L2-H-1.5 V TK1-L2-H-3 V TK1-L2-H-4.5 V TK1-L2-H-5 V TK1-L2-H-6 V TK1-L2-H-9 V TK1-L2-H-12 V TK1-L2-H-24 V

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.38 3.75 4.5 6.75 9 18

Standard PC board terminal TK1-1.5 V TK1-3 V TK1-4.5 V TK1-5 V TK1-6 V TK1-9 V TK1-12 V TK1-24 V

Self-clinching terminal TK1-H-1.5 V TK1-H-3 V TK1-H-4.5 V TK1-H-5 V TK1-H-6 V TK1-H-9 V TK1-H-12 V TK1-H-24 V

Nominal operating current, mA (±10%) 93.8 46.7 31.1 28.1 23.3 15.5 11.7 11.3

Coil resistance, Ω (±10%) 16 64.3 145 178 257 579 1,028 2,133

Nominal operating power, mW 140 140 140 140 140 140 140 270

Max. allowable voltage, V DC 2.25 4.5 6.7 7.5 9 13.5 18 28.8

Nominal operating power, mW 100 100 100 100 100 100 100 150

Max. allowable voltage, V DC 2.25 4.5 6.7 7.5 9 13.5 18 28.8

Nominal operating power, mW 200 200 200 200 200 200 250 400

Max. allowable voltage, V DC 2.25 4.5 6.7 7.5 9 13.5 14.4 26.4

2. 1 Coil latching Part No. Standard PC board terminal TK1-L-1.5 V TK1-L-3 V TK1-L-4.5 V TK1-L-5 V TK1-L-6 V TK1-L-9 V TK1-L-12 V TK1-L-24 V

Self-clinching terminal TK1-L-H-1.5 V TK1-L-H-3 V TK1-L-H-4.5 V TK1-L-H-5 V TK1-L-H-6 V TK1-L-H-9 V TK1-L-H-12 V TK1-L-H-24 V

Nominal operating current, mA (±10%) 66.7 33.3 22.2 20 16.7 11.1 8.3 6.3

Coil resistance, Ω (±10%) 22.5 90 202.5 250 360 810 1,440 3,840

3. 2 Coil latching Part No. Standard PC board terminal TK1-L2-1.5 V TK1-L2-3 V TK1-L2-4.5 V TK1-L2-5 V TK1-L2-6 V TK1-L2-9 V TK1-L2-12 V TK1-L2-24 V

Nominal operating current, mA (±10%) 133.9 66.7 44.5 40 33.3 22.2 20.8 16.7

Coil resistance, Ω (±10%) 11.2 45 101.2 125 180 405 576 1,440

Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case; 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

DIMENSIONS

mm inch

Standard PC board terminal 10.6 .417

PC board pattern (Copper-side view) 2.54 2.54 .100 .100

9 .354

4 3.75 .157 .148 3.5 .138

0.5 .020

0.25 .010 2.54 .100

7.62 .300

1 +

2.54 .100

Schematic (Bottom view) • Single side stable • 1-coil latching (Deenergized condition) (Reset condition)

4 3.75 .157 .148 0.5 .020

6-1.0 dia. holes 6-.040 dia. holes

9 .354

10.6 .417

0.25 .010 2.54 .100

2.54 .100 7.62 .300 +

2.54 .100

0.25 .010

Self-clinching terminal

3.5 .138

3 −

−

Tolerance: ±0.1 ±.004

• 2-coil latching (Reset condition)

1 +

2 −

3 +

0.25 .010 7.62 .300

General tolerance: ±0.3 ±.012

6 5 4 Direction indication*

*Orientation stripe located on top of relay.

TK REFERENCE DATA 1. Maximum value of continuous carrying current

2. Maximum switching capacity

3. Life curve

3.0 2

100 No. of operations, ×104

Switching current, A

Continuous carrying current, A

Test conditions: Coil applied voltage: 110% of rated voltage Continuous carrying current: 1,000 hours

2.0 DC load

1.0

0.5 0.4 0.3

30 V DC resistive 10

0.2

20 30

50 60 70 80 85 90 Ambient temperature, °C

50 100 200 300 Switching voltage, V

4. Mechanical life

5. Electrical life (DC load)

Tested sample: TK1-12V, 8 pcs. Switching frequency: 30 Hz

Tested sample: TK1-12V, 10 pcs. Condition: 2 A 30 V DC resistive load, 20 cpm Ratio against the rated voltage, %V

Ratio against the rated voltage, %V

90 Pick-up voltage

Max.

Circuit

70 Min.

50 40

30 V DC

Drop-out voltage

Max. Min.

10 0

100 90 80

Pick-up voltage

Max.

70 60

Min.

50 40

Drop-out voltage

Max.

30 20

Min.

–

100 1,000 10,000 No. of operations, ×104

Change of contact resistance

2 Switching current, A

Change of pick-up and drop-out voltage

100

No. of operations, ×104

6. Coil temperature rise Tested sample: TK1-12V, 6 pcs. Measured portion: Inside the coil Carrying current: 0 A, 1 A, 2 A Ambient temperature: 25°C 77°F

Ambient temperature: 70°C 158°F

80 70 60 50 40 30

Max. Min.

20 10 0

40 30

60 50

30 20

10 0

80 90 100 110 120 130 140 150 Coil applied voltage, %V

0A 1A 2A

No . of operations, ×104

0A 1A 2A

Temperature rise, °C

90 Temperature rise, °C

Contact resistance, mΩ

100

80 90 100 110 120 130 140 150 Coil applied voltage, %V

7. Operate/release time characteristics

8. Distribution of pick-up and drop-out voltage

Tested sample: TK1-5 V, 50 pcs.

Tested sample: TK1-5V, 50 pcs.

Release time Max. Max. Min. Min. Operate time

4 30 3

Quantity

Operate/release time, ms

Drop-out voltage 4

90 100 110 120 Coil applied voltage, %V

Pick-up voltage

Operate time

Release time 0

Max. Max. Min. Min.

90 100 110 120 Coil applied voltage, %V

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

TK 10. Ambient temperature characteristics

11. Distribution of contact resistance

Tested sample: TK1-L2-12V, 50 pcs.

Tested sample: TK1-12V, 5 pcs.

Tested sample TK1-5V, 50 pcs. (50×2 contacts)

Set voltage Reset voltage

Quantity

Drop-out voltage − x − x Pick-up voltage

30 20 10

0 –40 –20

Quantity

;; ;; ;; ;; ;;; ;;; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ;;;;;;;;;;;;;;;;;;; ;;; ; ;;; ; ;;; ; ; ;

Variation ratio, %

9. Distribution of set and reset voltage

20 40

60 80 Ambient –10 temperature, °C

–20

–30 –40

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

12 16 20 24 28 32 36 40 Contact resistance. mΩ

12. Distribution of operate/release bounce time

13.-(1) High-frequency characteristics

Tested sample: TK1-5V, 50 pcs.

Isolation characteristics

Isolation, dB

30 Quantity

Quantity

100

50 10

10 N.O. N.C.

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Operate bounce time, ms

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Release bounce time, ms

100 Frequency,MHz

1,000

13.-(3) High-frequency characteristics

14. Malfunctional shock

Insertion loss characteristics

V.S.W.R.

Tested sample: TK1-12V, 6 pcs. (single side stable); TK1-L2-12V, 6 pcs. (latching)

3.0

1.6

2.8

1.4

2.6

1.2

N.O.

1.0 0.8

Z Y , Y

2.4

Deenergized condition (Reset state) Energized condition (Set state) Z 980m/s2

980m/s2 Y

X 980m/s2

2.2 2.0

1.6

100 Frequency,MHz

1,000

15.-(1) Influence of adjacent mounting

Pick-up voltage 5

0 –5

N.C. 0

0.5 Frequency,GHz

15.-(2) Influence of adjacent mounting

OFF OFF

–5 OFF

5 .197 Inter-relay distance

Pick-up voltage

0 ON

–5

OFF

Drop-out voltage

0 OFF

–5 OFF

0 , mm inch

15.-(3) Influence of adjacent mounting

Pick-up voltage

–5

Rate of change, %

Drop-out voltage

980m/s2

1.0

Z 980m/s2

1.4 1.2

196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 ,

Rate of change, %

0.2

N.O.

5 .197 Inter-relay distance

Rate of change, %

N.C.

0.4

Rate of change, %

,Z XX

1.8

0.6

Rate of change, %

V.S.W.R.

1.8

Rate of change, %

Insertion loss, dB

13.-(2) High-frequency characteristics

Drop-out voltage OFF

OFF

–5

OFF OFF

0 , mm inch

5 .197 Inter-relay distance

, mm inch

458 Ω

0.08 µF

48 V DC –

Wire spring relay

5 4 458 Ω

Change of contact resistance

100

Pick-up voltage

Max. Min.

60 50 40 30

Drop-out voltage

Contact resistance, mΩ

Circuit

Change of pick-up and drop-out voltage

Ratio against the rated voltage, %V

16. Actual load test (35 mA 48 V DC wire spring relay load)

Max. Min.

20 10 0

N.C. N.O.

80 70 60 50 Max.

40 30

Max. Min. Min.

20 10

20 30 40 No. of operations,×104

For Cautions for Use, see Relay Technical Information

20 30 40 No. of operations,×104

SLIM POLARIZED RELAY

FEATURES

5.6 .220

14 .551

TN RELAYS • Surge voltage withstand: 1500 V FCC Part 68 • Self-clinching terminal also available

• Small header area makes higher density mounting possible • High sensitivity: 140 mW nominal operating power (single side stable 3-12 V type)

9.8 .386

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A)

2 Form C 60 mΩ

Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1 Single side stable Nominal operating power

1 coil latching 2 coil latching

Expected life (min. operations)

Mechanical (at 180 cpm) 1 A 30 V DC resistive load Electrical (at 20 cpm) 0.5 A 125 V AC resistive load

Gold-clad silver 1 A 30 V DC, 0.5 A 125 V AC 30 W, 62.5 VA 110 V DC,125 V AC 1A 10 µA 10 mV DC 140 mW (3 to 12 V DC) 200 mW (24 V DC) 300 mW (48 V DC) 100 mW (3 to 12 V DC) 150 mW (24 V DC) 200 mW (3 to 12 V DC) 300 mW (24 V DC) 108 2 × 105 105

Note: ❇1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC])

Initial insulation resistance*1 Between open contacts Initial Between contact and breakdown coil voltage Between contact sets

Min. 1,000 MΩ (at 500 V DC) 750 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA)

FCC surge voltage between open contacts Temperature rise*2 (at 20°C) Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight

Ambient temperature Humidity

1,500 V

Max. 3 [Max. 3 Max. 3 [Max. 3

Max. 50°C ms (Approx. 2 ms (Approx. 2 ms (Approx. 1 ms (Approx. 2

ms) ms)] ms) ms)]

Min. 490 m/s2 {50G} Min. 980 m/s2 {100G} 176.4 m/s2 {18G}, 10 to 55 Hz at double amplitude of 3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +70°C –40°F to +158°F 5 to 85% R.H. Approx. 1.5 g .053 oz

*5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs. *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT .

ORDERING INFORMATION Ex. TN

12V

Contact arrangement

Operating function

Terminal shape

Coil voltage(DC)

2: 2 Form C

Nil: Single side stable L: 1 coil latching L2: 2 coil latching

Nil: Standard PC board terminal H: Self-clinching terminal

3,4.5,5,6,9,12, 24,48*V

*48 V coil type: Single side stable only Note: AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TN2–12V–3. All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

TN TYPES AND COIL DATA (at 20°C 68°F) 1. Single side stable Part No.

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

3 4.5 5 6 9 12 24 48

2.25 3.38 3.75 4.5 6.75 9 18 36

0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

Self-clinching terminal

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

TN2-L2-H-3 V TN2-L2-H-4.5 V TN2-L2-H-5 V TN2-L2-H-6 V TN2-L2-H-9 V TN2-L2-H-12 V TN2-L2-H-24 V

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

Standard PC board terminal TN2-3 V TN2-4.5 V TN2-5 V TN2-6 V TN2-9 V TN2-12 V TN2-24 V TN2-48 V

Self-clinching terminal TN2-H-3 V TN2-H-4.5 V TN2-H-5 V TN2-H-6 V TN2-H-9 V TN2-H-12 V TN2-H-24 V TN2-H-48 V

Nominal operating current, mA (±10%) 46.7 31.1 28.1 23.3 15.5 11.7 8.3 6.25

Coil resistance, Ω (±10%) 64.3 145 178 257 579 1,028 2,880 7,680

Nominal operating power, mW 140 140 140 140 140 140 200 300

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 57.6

Nominal operating power, mW 100 100 100 100 100 100 150

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

Nominal operating power, mW 200 200 200 200 200 200 300

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 28.8

2. 1 Coil latching Part No. Standard PC board terminal TN2-L-3 V TN2-L-4.5 V TN2-L-5 V TN2-L-6 V TN2-L-9 V TN2-L-12 V TN2-L-24 V

Self-clinching terminal TN2-L-H-3 V TN2-L-H-4.5 V TN2-L-H-5 V TN2-L-H-6 V TN2-L-H-9 V TN2-L-H-12 V TN2-L-H-24 V

Nominal operating current, mA (±10%) 33.3 22.2 20 16.7 11.1 8.3 6.3

Coil resistance, Ω (±10%) 90 202.5 250 360 810 1,440 3,840

3. 2 Coil latching Part No. Standard PC board terminal TN2-L2-3 V TN2-L2-4.5 V TN2-L2-5 V TN2-L2-6 V TN2-L2-9 V TN2-L2-12 V TN2-L2-24 V

Nominal operating current, mA (±10%) 66.7 44.4 40 33.3 22.2 16.7 12.5

Coil resistance, Ω (±10%) 45 101.2 125 180 405 720 1,920

Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 3. In case of 5 V drive circuit, it is recommended to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix "–3" like TN2-12V-3.

DIMENSIONS

mm inch

Standard PC board terminal 14 551

PC board pattern (Copper-side view)

5.6 .220

10.16 .400 2.54 .100

9.5 9.8.374 .386

2.54 .100

3.5 .138 2.54 .100

0.5 .020

1.385 .055

Tolerance: ±0.1 ±.004

2.54 .100

Schematic (Bottom view) • Single side stable • 1-coil latching (Deenergized condition) (Reset condition)

Self-clinching terminal 14 551

10-1.0 dia. hole 10-.039 dia. hole

0.25 .010

5.6 .220

9.5 9.8.374 .386

1 2 3 4 5

3.5 .138 2.54 .100

0.5 .020

1.385 .055

0.25 .010 2.54 .100

10 9 8 7 6 Direction indication*

• 2-coil latching (Reset condition) 1 2 3 4 5

10 9 8 7 6 Direction indication*

*Orientation stripe located on top of relay

TN REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life Ratio against the rated voltage, %V

DC load (cosϕ=1) AC load (cosϕ=1)

No. of operations, ×104

Switching current, A

Tested sample: TN2-12V, 10 pcs.

30 V DC resistive load

100

1.0

0.5 0.4

125 V AC resistive load 10

0.3

100

0.2

90 80 70

Pick-up voltage

Max.

Min.

40 30

Drop-out voltage Max.

Min.

10 30

100 Switching voltage,V

200

1.0 0.5 Switching current, A

100 1,000 No. of operations, ×104

10,000

4. Electrical life (DC load)

5. Coil temperature rise

Tested sample: TN2-12V, 10 pcs. Condition: 1 A 30 V DC resistive load, 20 cpm

Tested sample: TN2-12V Point measured: Inside the coil Ambient temperature: Room temperature (25° to 26°C), 70°C (77° to 79°F), 158°F

Change of contact resistance

100

90 Pick-up voltage

Max.

70 60

Min.

50 40

Drop-out voltage Max.

70 60 50 40

Terminal No.2–3–4 Terminal No.7–8–9

10 15 No. of operations, ×104

40 30 20 10

10 5

Min.

Carrying current 0 A (Room temp.) 1 A (Room temp.) 0 A (70°C) 1 A (70°C)

30 20

Temperature rise, °C

Contact resistance,mΩ

Ratio against the rated voltage %V

Change of pick-up and drop-out voltage

10 15 No.of operations, ×104

90 100 110 120 130 140 150 Coil applied voltage, %V

6. Operate/release time characteristics

7. Set/reset time characteristics

8. Distribution of pick-up and drop-out voltages

Tested sample: TN2-12V, 5 pcs.

Tested sample: TN2-L2-12V, 5 pcs.

Tested sample: TN2-12V, 40 pcs.

30 Set time

3 Operate time

Max. Min. Max. Min.

1 Release time 0

;;;;; ;;;;;;;; ;; ;; ;

9. Distribution of set and reset voltage Tested sample: TN2-L2-12V, 32 pcs.

Quantity

Max. Min.

90 100 110 120 Coil applied voltage, %V

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

10. Ambient temperature characteristics

11. Distribution of contact resistance

Tested sample: TN2-12V, 5 pcs.

Tested sample: TN2-12V, 38 pcs. (38×4 contacts) 40

x Variation ratio, %

Reset voltage

Drop-out voltage

Set voltage

90 100 110 120 Coil applied voltage, %V

Pick-up voltage Quantity

Reset time

1 2 3 4 5

Drop-out voltage

30 30 20

10 Pick-up voltage –40 –20 –10 0 Ambient 20 40 60 80 temperature, °C –10

Quantity

Set and reset time, ms

Operate and release time, ms

Terminal No. 7,8,9 Side

6 7 8 9 10

Terminal No. 2,3,4 side

–20 –30

–40

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

40 50 Contact resistance,mΩ

TN 12-(1). Malfunctional shock (single side stable)

12-(2). Malfunctional shock (latching)

Tested sample: TN2-12V, 6 pcs.

Tested sample: TN2-L2-12V, 6 pcs.

, Z

X X

Y 980m/s2

, X 980m/s2

, Z 980m/s2

Z 980m/s2

, X 980m/s2

, Z 980m/s2

2 980m/s , Y

Pick-up voltage

13-(2). Influence of adjacent mounting Rate of change, %

13-(1). Influence of adjacent mounting Rate of change, %

Deenergized condition Energized condition

X 980m/s2

Z 980m/s2

980m/s2

, Z

Deenergized condition Energized condition

0 –10

–10 ON

Rate of change, %

ON OFF

OFF

10 Drop-out voltage 0 OFF

–10 0

5 .197 Inter-relay distance

Pick-up voltage 0

OFF

20 Drop-out voltage 10 OFF

0 0

5 .197 Inter-relay distance

, mm inch

14. Actual load test (35 mA 48 V DC wire spring relay load)

Circuit 500Ω 48 V DC

0.1 µF 0.1 µF

3 2 500Ω

Wire spring relay Circuit diagram

Change of contact resistance

100

80 Pick-up voltage

Max.

Min.

50 40

Drop-out voltage

Max.

Min.

Contact resistance, mΩ

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

70 60 50 Terminal No. 2–3

Max. Min.

30 20 10

10 0

20 30 40 No. of operations,×104

20 30 40 No. of operations, ×104

15-(1). High-frequency characteristics

15-(2). High-frequency characteristics

15-(3). High-frequency characteristics

Tested sample: TN2-xxV Isolation characteristics

Tested sample: TN2-xxV Insertion loss characteristics

Tested sample: TN2-xxV V.S.W.R. 2.2

Terminal No. 7–8–9

50 Terminal No. 2–3–4

2.1

1.4

2.0

1.2

1.9

1.0 Terminal No. 2–3–4 0.6

1.4

1.5 Terminal No. 2-3-4

1.3

0.4

1000

1.7 1.6

Terminal No. 7-8-9

1.2

0.2 100 Frequency, MHz

1.8

0.8

Terminal No. 7–8–9

V.S.W.R.

Insertion loss, dB

Isolation, dB

1.6

100

1.1 10

100 Frequency, MHz

1000

1.0

100 Frequency, MHz

1000

TQ TESTING

LOW PROFILE 2 FORM C RELAY

TQ RELAYS

FEATURES 26.7 1.051

9 .354 5+0.4 –0.2 .197+.016 –.008

9 .354

14 .551

5+0.4 –0.2 .197+.016 –.008

mm inch

• High sensitivity: 2 Form C: 140 mW power consumption (single side stable type) 4 Form C: 280 mW power consumption (single side stable type) • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic washing • Self-clinching terminal also available • M.B.B. contact types available

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1

Single side stable

Nominal operating 1 coil latching power

2 coil latching Mechanical (at 180 cpm) Expected 1 A 30 V DC life (min. Electrical (at 20 cpm) resistive opera(1 A 30 V DC 0.5 A 125 V AC tions) resistive) resistive

Standard (B.B.M) type 2 Form C 4 Form C

M.B.B.type 2 Form D

Initial insulation resistance*1 Between open contacts

50 mΩ Gold-clad silver 1 A 30 V DC 1 A 30 V 0.5 A 125 V AC DC 30 W, 62.5 V A

30 W

110 V DC, 125 V AC 110 V DC 1A 10 µA 10 mV DC 140 mW (3 to 12 V DC) 280 mW 200 mW (3 to 24 V DC) 200 mW 400 mW (24 V DC) (48 V DC) 300 mW (48 V DC) 100 mW (3 to 12 V DC) 200 mW — 150 mW (24 V DC) 200 mW (3 to 12 V DC) 400 mW — 300 mW (24 V DC) 108 107 2×105

105

—

Note:

Initial breakdown voltage

Between contact and coil Between contact sets FCC surge voltage between open contacts Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) M.B.B. time*8 Temperature rise*2 (at 20°C) Functional*5 Shock resistance Destructive*6 Vibration resistance

Functional*7 Destructive

Conditions for Ambient operation, transtemperature port and storage*9 (Not freezing and condensing at low Humidity temperature) 2 Form C: Unit weight 4 Form C:

Standard M.B.B.type (B.B.M) type Min. 1,000 MΩ (at 500 V DC) 750 Vrms for 1 min. 300 Vrms for 1 min. (Detection current: (Detection current: 10 mA) 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 V Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)] Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)] — Min. 10 µs. Max. 50°C Min. 490 m/s2 {50G} Min. 980 m/s2 {100G} 176.4 m/s2 {18G}, 10 to 55 Hz at double amplitude of 3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +70°C –40°C to +50°C –40°F to +158°F –40°F to +122°F 5 to 85% R.H. Approx. 1.5 g .053 oz Approx. 3 g .106 oz. —

❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC])

Remarks

*8 M.B.B. time:

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs.

Min. 10 µs

Measuring condition 500 Ω 5 V DC

*9 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

TQ ORDERING INFORMATION EX. TQ Contact arrangement 2: 2 Form C 4: 4 Form C

Operating function

Terminal shape

3V MBB function

Nil: Standard PC board Nil: Single side stable Nil: Standard L: 1 coil latching terminal (B.B.M.) type H: Self-clinching terminal L2: 2 coil latching 2M: 2M.B.B. type

Coil voltage (DC) 3, 4.5, 5, 6, 9, 12, 24, 48* V

*48 V coil type: Single side stable only Notes: 1. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3. 2. M.B.B. contact types are available only for TQ2 type.

TYPES AND COIL DATA (at 20°C 68°F) 1. Standard (B.B.M.) type 2 Form C type 1. Single side stable Part No. Standard PC board terminal TQ2-3 V TQ2-4.5 V TQ2-5 V TQ2-6 V TQ2-9 V TQ2-12 V TQ2-24 V TQ2-48 V

Self-clinching terminal TQ2H-3 V TQ2H-4.5 V TQ2H-5 V TQ2H-6 V TQ2H-9 V TQ2H-12 V TQ2H-24 V TQ2H-48 V

Nominal operating current, mA (±10%) 46.7 31.1 28.1 23.3 15.5 11.7 8.3 6.25

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24 48

2.25 3.38 3.75 4.5 6.75 9 18 36

0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

66.7 44.4 40 33.3 22.2 16.7 12.5

45 101.2 125 180 405 720 1,920

64.3 144.6 178 257 579 1,028 2,880 7,680

Nominal operating power, mW 140 140 140 140 140 140 200 300

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 57.6

Nominal operating power, mW 100 100 100 100 100 100 150

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

Nominal operating power, mW 200 200 200 200 200 200 300

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 28.8

2. 1 Coil latching Part No. Standard PC board terminal TQ2-L-3 V TQ2-L-4.5 V TQ2-L-5 V TQ2-L-6 V TQ2-L-9 V TQ2-L-12 V TQ2-L-24 V

Self-clinching terminal TQ2H-L-3 V TQ2H-L-4.5 V TQ2H-L-5 V TQ2H-L-6 V TQ2H-L-9 V TQ2H-L-12 V TQ2H-L-24 V

Nominal operating current, mA (±10%) 33.3 22.2 20 16.7 11.1 8.3 6.3

Coil resistance, Ω (±10%) 90 202.5 250 360 810 1,440 3,840

3. 2 Coil latching Part No. Standard PC board terminal TQ2-L2-3 V TQ2-L2-4.5 V TQ2-L2-5 V TQ2-L2-6 V TQ2-L2-9 V TQ2-L2-12 V TQ2-L2-24 V

Self-clinching terminal TQ2H-L2-3 V TQ2H-L2-4.5 V TQ2H-L2-5 V TQ2H-L2-6 V TQ2H-L2-9 V TQ2H-L2-12 V TQ2H-L2-24 V

Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.

TQ 4 Form C type 1. Single side stable Part No. Standard PC board terminal TQ4-3 V TQ4-4.5 V TQ4-5 V TQ4-6 V TQ4-9 V TQ4-12 V TQ4-24 V TQ4-48 V

Self-clinching terminal TQ4H-3 V TQ4H-4.5 V TQ4H-5 V TQ4H-6 V TQ4H-9 V TQ4H-12 V TQ4H-24 V TQ4H-48 V

Nominal operating current, mA (±10%) 93.8 62.2 56.2 46.5 31.1 23.3 11.7 8.3

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24 48

2.25 3.38 3.75 4.5 6.75 9 18 36

0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

133 88.9 80 66.6 44.4 33.3 16.7

22.5 50.6 62.5 90 202.5 360 1,440

32 72.3 89 129 289 514 2,056 5,760

Nominal operating power, mW 280 280 280 280 280 280 280 400

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 57.6

Nominal operating power, mW 200 200 200 200 200 200 200

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

Nominal operating power, mW 400 400 400 400 400 400 400

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

2. 1 Coil latching Part No. Standard PC board terminal TQ4-L-3 V TQ4-L-4.5 V TQ4-L-5 V TQ4-L-6 V TQ4-L-9 V TQ4-L-12 V TQ4-L-24 V

Self-clinching terminal TQ4H-L-3 V TQ4H-L-4.5 V TQ4H-L-5 V TQ4H-L-6 V TQ4H-L-9 V TQ4H-L-12 V TQ4H-L-24 V

Nominal operating current, mA (±10%) 66.6 44.4 40 33.3 22.2 16.7 8.3

Coil resistance, Ω (±10%) 45 101.2 125 180 405 720 2,880

3. 2 Coil latching Part No. Standard PC board terminal TQ4-L2-3 V TQ4-L2-4.5 V TQ4-L2-5 V TQ4-L2-6 V TQ4-L2-9 V TQ4-L2-12 V TQ4-L2-24 V

Self-clinching terminal TQ4H-L2-3 V TQ4H-L2-4.5 V TQ4H-L2-5 V TQ4H-L2-6 V TQ4H-L2-9 V TQ4H-L2-12 V TQ4H-L2-24 V

Notes: 1. Specified value of the pick-up, drop-out, voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 25 pcs.; Case: 500 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. 1 coil latching and 2 coil latching types are also available by request. Please consult us for details. 5. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.

2. M.B.B. type Single side stable Part No. Standard PC board terminal TQ2-2M-3 V TQ2-2M-4.5 V TQ2-2M-5 V TQ2-2M-6 V TQ2-2M-9 V TQ2-2M-12 V TQ2-2M-24 V

Self-clinching terminal

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

TQ2H-2M-3 V TQ2H-2M-4.5 V TQ2H-2M-5 V TQ2H-2M-6 V TQ2H-2M-9 V TQ2H-2M-12 V TQ2H-2M-24 V

3 4.5 5 6 9 12 24

2.4 3.6 4 4.8 7.2 9.6 19.2

0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 66.7 44.4 40 33.3 22.2 16.7 8.3

Coil resistance, Ω (±10%) 45 101 125 180 405 720 2,880

Nominal operating power, mW 200 200 200 200 200 200 200

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.

TQ DIMENSIONS

mm inch

1) 2 Form C, 2 Form D Standard PC board terminal 4.75 .187

14 .551

PC board pattern (Copper-side view)

9 .354

10.16 .400

2.54 .100

10-1.0 dia. 10-.039 dia

5 +0.4 −0.2 .197 +.016 −.008

2.54 .100 7.62 .300

3.5 .138 0.25 .010

2.54 .100

0.5 .020

0.25 .010

7.62 .300

Tolerance: ±0.1 ±.004

Self-clinching terminal 4.75 .187

14 .551

Schematic (Bottom view) • Single side stable • 1-coil latching (Deenergized condition) (Reset condition)

9 .354

5 +0.4 −0.2 .197 +.016 −.008

3.5 .138 0.25 .010

2.54 .100

0.5 .020

0.25 .010

7.62 .300

−

• 2-coil latching (Reset condition)

10 9

Direction indication*

10 9

Direction indication*

− −

+ 10 9

Direction indication*

*Orientation stripe typical-located on top of relay

General tolerance: ±0.3 ±.012

2) 4 Form C Standard PC board terminal 26.7 1.051

4.75 .187

PC board pattern (Copper-side view)

9 .354

5 +0.4 −0.2 .197 +.016 −.008

22.86 .900 2.54 .100

5.08 .200

16-1.0 dia. 16-.039 dia

3.5 .138 0.25 .010

5.08 .200

0.5 .020

2.54 .100

7.62 .300

2.54 .100 7.62 .300

0.25 .010

Tolerance: ±0.1 ±.004

Self-clinching terminal 26.7 1.051

4.75 .187 5 .197

Schematic (Bottom view) • Single side stable • 1-coil latching (Deenergized condition) (Reset condition)

9 .354

+0.4 −0.2 +.016 −.008

3.5 .138 0.25 .010

5.08 .200

0.5 .020

2.54 .100

7.62 .300

0.25 .010

3 4 5 6 7 8 10

181716 151413 11

Direction indication*

−

3 4 5 6 7 8 10

181716 151413 11

Direction indication*

• 2-coil latching (Reset condition) 1

3 4 5 6 7 8 10

−

+ 20

181716 151413 11

−

Direction indication*

*Orientation stripe typical-located on top of relay

General tolerance: ±0.3 ±.012

REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life

1.0

0.5 0.4 0.3

30 V DC resistive load 100

125 V AC resistive load 10

0.2

100 200 Switching voltage,V

0.5 1.0 Switching current, A

Ratio against the rated voltage, %V

DC load (cosϕ=1) AC load (cosϕ=1)

No. of operations, ×104

Switching current, A

Tested sample: TQ2-12V, 10 pcs. 100 90 80

Pick-up voltage Max. Min.

70 60 50 40 Drop-out voltage

Max.

20 Min.

10 0

100 1,000 10,000 No. of operations, ×104

TQ 4.-(1) Electrical life (DC load)

4.-(2) Electrical life (AC load)

Tested sample: TQ2-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 20 cpm

Tested sample: TQ2-12V, 6 pcs. Condition: 0.5 A 125 V AC resistive load, 20 cpm

Change of contact resistance 100

Pick-up voltage

Max.

Min.

60 50 40

Drop-out voltage Max.

30 20

80 70 60 50

Max.

40 Min.

Min.

10 0

10 15 No. of operations, ×104

Change of contact resistance

10 15 No. of operations, ×104

50 40

Max.

Min.

50 40

Drop-out voltage

60 50

1A 0A

Max.

30 Min.

20 10 0

Nominal coil voltage 3 to 12 V DC type 24 V DC type

Max.

5 No. of operations, ×104

Tested sample: TQ4-12V Measured portion: Inside the coil Ambient temperature: 30°C 86°F

Temperature rise, C°

Pick-up voltage

5.-(2) Coil temperature rise (4C)

Tested sample: TQ2-12V Measured portion: Inside the coil Ambient temperature: 30°C 86°F

90 80

5.-(1) Coil temperature rise (2C)

100 Contact resistance, mΩ

100

70 Temperature rise, C°

Change of pick-up and drop-out voltage Ratio against the rated voltage, %V

100 Contact resistance, mΩ

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

60 50 1A

20 10 0

5 No. of operations, ×104

100 110 120 130 140 150 Coil applied voltage, %V

6.-(1) Operate/release time characteristics

6.-(2) Operate/release time characteristics

7. Distribution of pick-up and drop-out voltages

Tested sample: TQ2-12V, 10 pcs.

Tested sample: TQ4-12V, 10 pcs.

Tested sample: TQ2-12V, 50 pcs.

4 3 Operate time 2 Max. Min. Max. Min.

Release time

30 Pick-up voltage Drop-out voltage

5 4

3 Operate time 2

1 Release time

90 100 110 120 Coil applied voltage, %V

Quantity

Operate/release time, ms

Max. Min. Max. Min.

90 100 110 120 Coil applied voltage, %V

0 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

9. Ambient temperature characteristics

10. Distribution of contact resistance

Tested sample: TQ2-L2-12V, 35 pcs.

Tested sample: TQ2-12V, 5 pcs.

Tested sample: TQ2-12V, 30 pcs. (30×4 contacts)

;yy;y;y;y;y; y;y;y;y;y;y; ;yy;y; y; y; y; y;

30 Set voltage

Drop-out voltage

–40 –20

− x − x

;y;y;y;y;y;y ;y;y;y;y;;yy;y;;yy

Quantity

Reset voltage

Pick-up voltage 20 40 60 80 Ambient temperature,°C –20

30 Quantity

Variation ratio,%

8. Distribution of set and reset voltage

10 –40

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

40 50 Contact resistance, mΩ

TQ 11.-(1) High-frequency characteristics

11.-(2) High-frequency characteristics

11.-(3) High-frequency characteristics

Isolation characteristics

Insertion loss characteristics

V.S.W.R. 3.0

100 Frequency,MHz

2.4 V.S.W.R.

100

2.6

1.0 0.8

1.4

0.2

1.2

1,000

100 Frequency,MHz

Tested sample: TQ2-L-12V, 6 pcs.

Y 980m/s

Deenergized condition Energized condition Z 980m/s2

X 980m/s2

980m/s2 , Z

Z Y, Y

196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y

,Z XX

Y 980m/s2

Reset state Set state Z 980m/s2

X 980m/s2

196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y

980m/s2 , Z

980m/s2 , X

1.0

1,000

12.-(2) Malfunctional shock (latching)

1.8 1.6

Tested sample: TQ2-12V, 6 pcs.

,Z XX

2.0

0.4

12.-(1) Malfunctional shock (single side stable)

Z Y, Y

2.2

0.6

980m/s2 , X

13.-(3) Influence of adjacent mounting

Pick-up voltage

0 –10 ON OFF OFF

Drop-out voltage

0 OFF

–10 0

13.-(2) Influence of adjacent mounting

0.5 Frequency,GHz

13.-(1) Influence of adjacent mounting

Rate of change, % Rate of change, %

Insertion loss, dB

Isolation, dB

2.8

5 .197 Inter-relay distance

, mm inch

14.-(1) Contact reliability (1 mA 5 V DC resistive load)

Pick-up voltage

0 ON

–10

Drop-out voltage

OFF

0 OFF

–10 OFF

5 .197 Inter-relay distance

Pick-up voltage

F(t), % 99.9 99.0 95.0

–10

70.0 50.0 30.0 ON

10.0 5.0

Drop-out voltage OFF

2.0 1.0 0.5

OFF OFF

–10

, mm inch

5 .197 Inter-relay distance

15. Actual load test (35 mA 48 V DC wire spring relay load)

Tested sample: TQ2-12V Condition: Detection level 100 Ω

Circuit

100

Change of pick-up and drop-out voltage

F(t), % 99.9 99.0 95.0

100

20Hz

70.0 50.0 30.0 500Ω 10.0 5.0

0.2 0.1 1.0

10 No. of operations, ×106

, mm inch

14.-(2) Contact reliability (100 µA 5 V DC resistive load)

2.0 1.0 0.5

m=2.15 µ=2.7×107 95% reliability limit = 7.6×106 (Weibull probability paper)

0.2 0.1 1.0

OFF

m=1.4 µ=16.4×107 95% reliability limit = 19.5×106 (Weibull probability paper) 10 No. of operations, ×107

100

48 V DC

500Ω

Ratio against the rated voltage, %V

Rate of change, % Rate of change, %

Tested sample: TQ2-12V Condition: Detection level 10 W

90 80 Pick-up voltage

Max. Min.

60 50 40 30

Drop-out voltage Max. Min.

20 10 0

Wire spring relay Circuit diagram

20 30 40 No. of operations, ×104

TQ 16. 0.1 A 53 V DC resistive load test Change of pick-up and drop-out voltage

Change of contact resistance 100

70 60 50 40

Max.

Min.

20 10 0

20 30 40 No. of operations, ×104

100

90 80

Pick-up voltage Max. Min.

70 60 50 40 30

Drop-out voltage

Max. Min.

10 0

Contact resistance, mΩ

Ratio against the rated voltage, %V

100

90 Contact resistance, mΩ

Change of contact resistance

500

1,000

1,500

2,000

No. of operations, ×104

17.-(1) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs. Terminal Nos. 2-3-4: ON

Terminal Nos. 2-3-4: OFF

− x:105.6 µs 3σn-1: 163.8 µs Min.: 23 µs Max.:243 µs

60 50

50 41

30 20

− x:71.6 µs 3σn-1: 127.1 µs Min.: 17 µs Max.:187 µs

26 19

4 100 150 200 250 300 µs min. ~

100 150 200 250 300 350 µs max.

100 150 200 250 300 µs min.

10 ~

17.-(2) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs. Terminal Nos. 7-8-9: ON

Terminal Nos. 7-8-9: OFF

− x:115.6 µs 3σn-1: 167.3 µs Min.:35 µs Max.:254 µs

60 50

35 31

11 10

100 150 200 250 300 µs min.

100 150 200 250 300 350 µs max.

100 150 200 250 300 µs min.

10 ~

30 20

− x:80.7 µs 3σn-1: 156.7 µs Min.: 29 µs Max.:298 µs

For Cautions for Use, see Relay Technical Information

90 80 70 60

Max.

50 40 30

Min.

20 10 0

500

1,000 1,500 2,000 No. of operations, ×104

TQ SMD

TESTING

LOW-PROFILE SURFACE-MOUNT RELAY

TQ SMD RELAYS

FEATURES 14 .551

9 .354 5.6 .220

mm inch

• Low-profile: 6 mm .236 inch (Tape height: max. 6.5 mm .256 inch) • Tape and reel package is available as standard packing style • Surge withstand between contacts and coil: 2,500 V • Breakdown voltage between contacts and coil: 1,500 V • Capacity: 2 A • High sensitivity: 2 Form C; 140 mW power consumption (Single side stable type)

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1 Single side stable Nominal operating power

1 coil latching 2 coil latching

Expected life (min. operations)

Mechanical (at 180 cpm) 2 A 30 V DC resistive Electrical 1 A 30 V DC (at 20 cpm) resistive 0.5 A 125 V AC resistive

2 Form C 75 mΩ Gold-clad silver alloy 2 A 30 V DC, 0.5 A 125 V AC 60 W, 62.5 VA 220 V DC, 125 V AC 2A 10 µA 10 mV DC 140 mW (1.5 to 12 V DC) 200 mW (24 V DC) 300 mW (48 V DC) 70 mW (1.5 to 12 V DC) 100 mW (24 V DC) 140 mW (1.5 to 12 V DC) 200 mW (24 V DC) 108

Initial insulation resistance*1 Between open contacts Initial breakdown Between contact sets voltage Between contact and coil Between open contacts Initial surge (10×160 µs) voltage Between contacts and coil (2×10 µs) Temperature rise*2 (at 20°C) Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) Functional*5 Shock resistance Destructive*6 Functional*7

105 Vibration resistance

Destructive

2×105 105

Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight

Ambient temperature Humidity

Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 2 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 V (FCC Part 68) 2,500 V (Telcordia) Max. 50°C Max. 4 ms (Approx. 2 ms) [Max. 4 ms (Approx. 2 ms)] Max. 4 ms (Approx. 1 ms) [Max. 4 ms (Approx. 2 ms)] Min. 750 m/s2 {75 G} Min. 1,000 m/s2 {100 G} 200 m/s2 {20G}, 10 to 55 Hz at double amplitude of 3.3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +85°C*3 –40°F to +185°F 5 to 85% R.H. Approx. 2 g .071 oz

TQ SMD ORDERING INFORMATION Ex. TQ Contact arrangement 2: 2 Form C

–

Surface-mount availability SA: Standard surface-mount SA: terminal type SL : High connection reliability SA: surface-mount terminal type SS: Space saving surfaceSA: mount terminal type

–

Operating function

Coil voltage (DC)

Nil: Single side stable L: 1 coil latching L2: 2 coil latching

1.5, 3, 4.5, 5, 6, 9, 12, 24, 48* V

Packing style Nil: Tube packing Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side)

*48 V coil type: Single side stable only Notes: 1. Tape and reel (picked from 1/2/3/4/5-pin side) is also available by request. Part No. suffix “-X” is needed when ordering. (ex.) TQ2SA-3V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.

TYPES 1. Single side stable Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.5 3 4.5 5 6 9 12 24 48

1.13 2.25 3.38 3.75 4.5 6.75 9 18 36

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

1.5 3 4.5 5 6 9 12 24

1.13 2.25 3.38 3.75 4.5 6.75 9 18

Part No.

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

TQ2S❍-L2-1.5 V TQ2S❍-L2-3 V TQ2S❍-L2-4.5 V TQ2S❍-L2-5 V TQ2S❍-L2-6 V TQ2S❍-L2-9 V TQ2S❍-L2-12 V TQ2S❍-L2-24 V

1.5 3 4.5 5 6 9 12 24

1.13 2.25 3.38 3.75 4.5 6.75 9 18

Part No. TQ2S❍-1.5 V TQ2S❍-3 V TQ2S❍-4.5 V TQ2S❍-5 V TQ2S❍-6 V TQ2S❍-9 V TQ2S❍-12 V TQ2S❍-24 V TQ2S❍-48 V

Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3 6.3

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

16 64.3 145 178 257 579 1,028 2,880 7,680

140 140 140 140 140 140 140 200 300

2.2 4.5 6.7 7.5 9 13.5 18 36 57.6

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

32 128.6 289.3 357 514 1,157 2,057 5,760

70 70 70 70 70 70 70 100

2.2 4.5 6.7 7.5 9 13.5 18 36

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

16 64.3 145 178 257 579 1,028 2,880

140 140 140 140 140 140 140 200

2.2 4.5 6.7 7.5 9 13.5 18 36

2. 1 coil latching Part No. TQ2S❍-L-1.5 V TQ2S❍-L-3 V TQ2S❍-L-4.5 V TQ2S❍-L-5 V TQ2S❍-L-6 V TQ2S❍-L-9 V TQ2S❍-L-12 V TQ2S❍-L-24 V

Nominal operating current, mA (±10%) 46.9 23.3 15.6 14 11.7 7.8 5.8 4.2

3. 2 coil latching Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3

❍: For each surface-mounted terminal variation, input the following letter. SA type: A, SL type: L, SS type: S Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. Tape and reel: 500 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

TQ SMD DIMENSIONS

mm inch

SA type 9 .354

14 .551

2.54 .100

0.5 .020

0.25 .010

4.9 .193

5.6 .220

Recommendable mounting pad (Top view) SA type 1 .039

7.62 .300 11.5±0.5 .453±.020

0.2 .008

Schematic (Top view) •Single side stable (Deenergized condition) −

10 9

2.54 .100

2 .079

2.94 .116

9.56 .376

SL type

Direction indication* *Orientation stripe located on top of relay.

9 .354

14 .551

0.25 .010

4.9 .193

Max. 7.5 .295 2.54 .100

0.3 .012

For glue-pad

•1-coil latching (Reset condition)

14 .551

SL type 7.62 .300 11.5±0.5 .453±.020

0.5 .020

1 .039

2.54 .100

9.56 .376

*Orientation stripe located on top of relay.

SS type

7.62 .300 9.3±0.5 ±.020

0.5 .020

•2-coil latching (Reset condition)

0.25 .010

4.9 .193

Max. 7.5 .295

Direction indication*

9 .354

14 .551

−

2.54 .100

2.94 .116

SS type

10 9

1 .039

General tolerance: ±0.3 ±.012

10 9

2.54 .100

−

1.84 .072

8.46 .333

−

Direction indication* *Orientation stripe located on top of relay.

Tolerance: ±0.1 ±.004

REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life (mounting by IRS method)

Ratio against the rated voltage, %V

Tested sample: TQ2SA-12V, 10 pcs.

No. of operations, × 104

Switching current, A

3.0 2.0

100

DC resistive load

1.0 AC resistive load

0.5 0.4 0.3

50 30

125V AC resistive load

30V DC resistive load

20 10

0.2

100 90 80 Pick-up voltage

Max.

Min.

50 40 Drop-out voltage

Max.

20 Min.

10 0

20 30

50 100 200 300 Contact voltage, V

1.0 2.0 Switching current, A

IRS 1

10 100 1,000 10,000 4 No. of operations, ×10

4.-(2) Electrical life (0.5 A 125 V AC resistive load)

Tested sample: TQ2SA-12V, 6 pcs. Operating frequency: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method)

Tested sample: TQ2SA-12V, 6 pcs Operating frequency: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method)

Change of contact resistance (mounting by IRS method) 100

80 Pick-up voltage

70 60

Max. Min.

50 40

Drop-out voltage

30 Max.

Min.

10 0

IRS 1

3 4 5 6 7 8 9 10 No. of operations, ×104

100

80 70 60 50

Max.

40 Min.

30 20

90 80 Pick-up voltage

70 60

Max. Min.

50 40

Drop-out voltage

Max.

Min.

10 0

Ratio against the rated voltage, %V

100

Contact resistance, mΩ

Ratio against the rated voltage, %V

4.-(1) Electrical life (2 A 30 V DC resistive load)

IRS 1

3 4 5 6 7 8 9 10 No. of operations, ×104

IRS 1

3 4 5 6 7 8 9 10 No. of operations, ×104

TQ SMD Change of contact resistance (mounting by IRS method)

5. Coil temperature rise

6. Operate/release time

Tested sample: TQ2SA-12V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F

Tested sample: TQ2SA-12V, 6 pcs.

100

70 60 50

Max.

40 Min.

Coil voltage DC 12V type DC 48V type

50 2A

30 20

Operate and release time, ms

Temperature rise, °C

Contact resistance, mΩ

IRS 1

No. of operations, ×10

9 10

4 Max. Min.

2 Max. Min.

Operate time Release time

100 110 120 130 140 150 Coil applied voltage, %V

90 100 110 120 Coil applied voltage, %V

8. Distribution of set and reset voltage

9. Ambient temperature characteristics

Tested sample: TQ2SA-12V, 50 pcs.

Tested sample: TQ2SA-L-12V, 30 pcs.

Tested sample: TQ2SA-12V, 5 pcs.

Set voltage Reset voltage

; @ @ ; @ ; ; @; @; @; @; @; @; @

Quantity

–40 –20

; ; ;;;;; ;;;;;

;;;;; ;;;;;; ; ;

; @; @; @; @; @; @; @ ; @ @ ; @ ; Drop-out voltage

;;

Quantity

;;

30 Pick-up voltage

Rate of change, %

7. Distribution of pick-up and drop out voltage

Pick-up voltage x

Drop-out voltage 20 40 60 80 Ambient temperature, °C –20

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

–40

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

10. Distribution of contact resistance

11.-(1) High-frequency characteristics

11.-(2) High-frequency characteristics

Tested sample: TQ2SA-5V, 30 pcs. (30 × 4 contacts)

Isolation characteristics

Insertion loss characteristics

50 10 9 8 7 6

1 2 3 4 5

Isolation, dB

Terminal Nos. 2-3, 8-9

;

Quantity

(TOP VIEW)

;;;;;;;; ;;;;;; 30

Insertion loass, dB

;;;;;;;; ;;; Terminal Nos. 3-4, 7-8

;;;

– +

100

0.4 0.2 10

30 40 50 Contact resistance, mΩ

100 Frequency, MHz

1,000

12.-(2) Malfunctional shock (latching)

Tested sample: TQ2SA-12V, 6 pcs

Tested sample: TQ2SA-L2-12V, 6 pcs.

Z X

X' Y 1000m/s 2

Deenergized condition Energized condition

Z' Y Y'

Z X

X' Y 1000m/s 2

Reset condition Set condition

X 1000m/s2

Z' 1000m/s 2

X 1000m/s2

Z' 1000m/s 2

1000m/s 2 Z

1000m/s 2 X'

1000m/s 2 Z

1000m/s 2 X'

1000m/s 2 Y'

0.8 0.6

12.-(1) Malfunctional shock (single side stable)

Z' Y Y'

1.0

1000m/s 2 Y'

100 Frequency, MHz

1,000

TQ SMD Tested sample: TQ2SA-12V, 6 pcs.

0 ON

–10

OFF OFF

10 Drop-out voltage 0

OFF

–10 0

10 Pick-up voltage 0

ON –10 ON

Rate of change, %

ON Pick-up voltage

Rate of change, %

13.-(3) Influence of adjacent mounting

Tested sample: TQ2SA-12V, 6 pcs. Rate of change, %

13.-(2) Influence of adjacent mounting

Tested sample: TQ2SA-12V, 5 pcs. Rate of change, %

13.-(1) Influence of adjacent mounting

OFF

10 Drop-out voltage

OFF –10 OFF 0

1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch

ON Pick-up voltage

–10

ON ON

OFF

Drop-out voltage OFF

–10

OFF

1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch

OFF 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch

14. Pulse dialing test

458 Ω

+ 0.08 µF 48 V DC

0.08 µF

TQ-SMD 3 relay 2

–

458 Ω Wire spring relay

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage (mounting by IRS method)

Change of contact resistance (mounting by IRS method)

100

80 Pick-up voltage

Max.

Min.

50 40

Drop-out voltage

Max.

Min.

Contact resistance, mΩ

Tested sample: TQ2SA-12V, 6 pcs. (35 mA 48 V DC wire spring relay load) Circuit

80 70 60 50 40

Max.

Min.

20 10

10 0

20 30 40 No. of operations, ×104

IRS

20 30 40 No. of operations, ×104

; ; ;;

IRS

NOTES

1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.

2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type

(2) Dimensions of plastic reel

mm inch

±0.8

21 .827 ±.031

mm inch

Orientation (indicates PIN No.1)stripe

0.4 ±0.1 .016 ±.004

Stopper (gray)

Relay polarity bar 4.0 ±0.1 .157 ±.004 (Z type) 1.75 ±0.1 1.5 +0.1 0 dia. ±.004 .059 +.004 dia. 0 2.0 ±0.1 .069 .079 ±.004

2.0 ±0.5 .079 ±.020

11.5 .453 14.6±0.1 .575±.004

Stopper (green)

6.3 ±0.2 .248 ±.008

2.0 .079

TQ-SMD relays

+0.1 0 +.004 0

dia. 16.0±0.1 12.3 ±0.1 dia. .630±.004 .484 ±.004

24.0 ±0.3 .945 ±.012

Tape coming out direction

mm inch

0.4 .016

Relay polarity bar (Z type) 1.5 +0.1 0 dia. .059 +.004 dia. 0

4.0 .157

±0.1 ±.004

1.75 ±0.1 ±.004 2.0 ±0.1 .069 .079 ±.004

11.5 ±0.1 .453 ±.004 14.6±0.1 .575±.004

7.8 ±0.2 .307 ±.008

TQ-SMD relays

Note) *SS type

2.0 +0.1 0 dia. 16.0 ±0.1 12.3 ±0.1 24.0 ±0.3 .079 +.004 dia. .630±.004 .484 ±.004 .945 ±.012 0 ±0.1 (10.1 Tape coming out direction .398 ±.004)*

330 ±2 dia. 12.992 ±.079 dia.

13 ±0.2 .512 ±.008

24.4+20 .961+.079 0

(ii) SL, SS type

±0.1 ±.004

100 ±1 dia. 3.937 ±.039 dia.

±0.1 ±.004

2.0±0.2 .079±.008

TESTING

2 A CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE 15 .591

7.4 .291 8.2 .323

15 .591

7.4 .291 8.4 .331

mm inch

TX RELAYS

FEATURES • Breakdown voltage between contacts and coil: 2,000 V • Surge withstand between contacts and coil: 2,500 V • High contact capacity: 2 A 30 V DC • Surface-mount type available

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1 Nominal operating power

Single side stable

Expected life (min. operations)

2 A 30 V DC resistive Electrical (at 20 cpm) 1 A 30 V DC resistive

1 coil latching 2 coil latching Mechanical (at 180 cpm)

2 Form C 100 mΩ Gold-clad silver alloy 2 A 30 V DC 60 W 220 V DC 2A 10 µA 10 mV DC 140 mW (1.5 to 24 V DC) 270 mW (48 V DC) 100 mW (1.5 to 24 V DC) 200 mW (1.5 to 24 V DC) 108 105 5×105

Notes: ❇1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC]) ❇2The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40°C to +158°F.

Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 2 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. 4 * Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs. *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.

Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 2,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 V (FCC Part 68) 2,500 V (Telcordia) Max. 50°C

Max. 4 ms (Approx. 2 ms) Operate time [Set time]*3 (at 20°C) [Max. 4 ms (Approx. 2 ms)] Max. 4 ms (Approx. 1 ms) Release time [Reset time]*4 (at 20°C) [Max. 4 ms (Approx. 2 ms)] Min. 750 m/s2 {75 G} Functional*5 Shock resistance Destructive*6 Min. 1,000 m/s2 {100 G} 196 m/s2 {20 G}, 10 to 55 Hz Functional*7 at double amplitude of 3.3 mm Vibration resistance 294 m/s2 {30G}, 10 to 55 Hz Destructive at double amplitude of 5 mm –40°C to +85°C (up to 24 V coil) Conditions for operation, transport and Ambient tem- –40°F to +185°F (up to 24 V coil) perature ❇2 –40°C to +70°C (48 V coil) storage*8 (Not freezing and –40°F to +158°F (48 V coil) condensing at low Humidity 5 to 85% R.H. temperature) Unit weight Approx. 2 g .071 oz

TX ORDERING INFORMATION Ex. TX Contact arrangement

Surface-mount availability

–

Operating function Terminal shape

Nil: Standard PC board terminal type or Nil: self-clinching terminal type SA: Standard surface-mount terminal type SL : High connection reliability surface-mount SL : terminal type SS: Space saving surface-mount terminal type

–

Coil voltage (DC)

Packing style

Nil: Standard PC 1.5, 3, 4.5, 5, 6, Nil: Tube packing board terminal or 9, 12, 24, 48* V Z: Tape and reel surface-mount packing(picked terminal from the 8/9/10/12 H: Self-clinching -pin side terminal Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number suffix “-X” is *48 V coil type: Single side stable only 2: 2 Form C

Nil: Single side Nil: stable L: 1 coil latching L2: 2 coil latching

needed when ordering. (ex.) TX2SA-3 V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.

TYPES AND COIL DATA (at 20°C 68°F) 1) Standard PC board terminal type and self-clinching terminal type 1. Single side stable Part No. Standard PC board terminal TX2-1.5 V TX2-3 V TX2-4.5 V TX2-5 V TX2-6 V TX2-9 V TX2-12 V TX2-24 V TX2-48 V

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.5 3 4.5 5 6 9 12 24 48

1.13 2.25 3.38 3.75 4.5 6.75 9 18 36

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

1.5 3 4.5 5 6 9 12 24

1.13 2.25 3.38 3.75 4.5 6.75 9 18

Self-clinching terminal

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

TX2-L2-H-1.5 V TX2-L2-H-3 V TX2-L2-H-4.5 V TX2-L2-H-5 V TX2-L2-H-6 V TX2-L2-H-9 V TX2-L2-H-12 V TX2-L2-H-24 V

1.5 3 4.5 5 6 9 12 24

1.13 2.25 3.38 3.75 4.5 6.75 9 18

Self-clinching terminal TX2-H-1.5 V TX2-H-3 V TX2-H-4.5 V TX2-H-5 V TX2-H-6 V TX2-H-9 V TX2-H-12 V TX2-H-24 V TX2-H-48 V

Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 5.8 5.6

Coil resistance, Ω (±10%) 16 64.3 145 178 257 579 1,028 4,114 8,533

Nominal operating power, mW 140 140 140 140 140 140 140 140 270

Max. allowable voltage, V DC 2.2 4.5 6.7 7.5 9 13.5 18 36 57.6

Nominal operating power, mW 100 100 100 100 100 100 100 100

Max. allowable voltage, V DC 2.2 4.5 6.7 7.5 9 13.5 18 36

Nominal operating power, mW 200 200 200 200 200 200 200 200

Max. allowable voltage, V DC 2.2 4.5 6.7 7.5 9 13.5 18 36

2. 1 Coil latching Part No. Standard PC board terminal TX2-L-1.5 V TX2-L-3 V TX2-L-4.5 V TX2-L-5 V TX2-L-6 V TX2-L-9 V TX2-L-12 V TX2-L-24 V

Self-clinching terminal TX2-L-H-1.5 V TX2-L-H-3 V TX2-L-H-4.5 V TX2-L-H-5 V TX2-L-H-6 V TX2-L-H-9 V TX2-L-H-12 V TX2-L-H-24 V

Nominal operating current, mA (±10%) 66.7 33.3 22.2 20 16.7 11.1 8.3 4.2

Coil resistance, Ω (±10%) 22.5 90 202.5 250 360 810 1,440 5,760

3. 2 Coil latching Part No. Standard PC board terminal TX2-L2-1.5 V TX2-L2-3 V TX2-L2-4.5 V TX2-L2-5 V TX2-L2-6 V TX2-L2-9 V TX2-L2-12 V TX2-L2-24 V Notes:

1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

Nominal operating current, mA (±10%) 133.9 66.7 44.5 40 33.3 22.2 16.7 8.3

Coil resistance, Ω (±10%) 11.2 45 101.2 125 180 405 720 2,880

2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

TX 2) Surface-mount terminal type 1. Single side stable Part No. TX2S❍-1.5 V TX2S❍-3 V TX2S❍-4.5 V TX2S❍-5 V TX2S❍-6 V TX2S❍-9 V TX2S❍-12 V TX2S❍-24 V TX2S❍-48 V

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.5 3 4.5 5 6 9 12 24 48

1.13 2.25 3.38 3.75 4.5 6.75 9 18 36

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

1.5 3 4.5 5 6 9 12 24

1.13 2.25 3.38 3.75 4.5 6.75 9 18

Nominal voltage, V DC 1.5 3 4.5 5 6 9 12 24

Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 5.8 5.6

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

16 64.3 145 178 257 579 1,028 4,114 8,533

140 140 140 140 140 140 140 140 270

2.2 4.5 6.7 7.5 9 13.5 18 36 57.6

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

1.13 2.25 3.38 3.75 4.5 6.75 9 18

66.7 33.3 22.2 20 16.7 11.1 8.3 4.2

22.5 90 202.5 250 360 810 1,440 5,760

100 100 100 100 100 100 100 100

2.2 4.5 6.7 7.5 9 13.5 18 36

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

1.13 2.25 3.38 3.75 4.5 6.75 9 18

133.9 66.7 44.5 40 33.3 22.2 16.7 8.3

11.2 45 101.2 125 180 405 720 2,880

200 200 200 200 200 200 200 200

2.2 4.5 6.7 7.5 9 13.5 18 36

2. 1 coil latching Part No. TX2S❍-L-1.5 V TX2S❍-L-3 V TX2S❍-L-4.5 V TX2S❍-L-5 V TX2S❍-L-6 V TX2S❍-L-9 V TX2S❍-L-12 V TX2S❍-L-24 V

3. 2 coil latching Part No. TX2S❍-L2-1.5 V TX2S❍-L2-3 V TX2S❍-L2-4.5 V TX2S❍-L2-5 V TX2S❍-L2-6 V TX2S❍-L2-9 V TX2S❍-L2-12 V TX2S❍-L2-24 V

❍: For each surface-mounted terminal variation, input the following letter. SA type: A , SL type: L , SS type: S

Notes: 1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. 3. Tape and reel packing is also available for surface-mount type by request. Part number suffix "-X" or "-Z" is needed when ordering. In this case, "X" or "Z" are not marked on the relay. Quantity in tape and reel: 500 pcs. • TX2SA-L-3V-Z (ex.) • TX2SA-3V-X Picked from the 1/3/4/5-pin side Picked from the 8/9/10/12-pin side 4. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

TX DIMENSIONS

mm inch

1. Single side stable and 1 coil latching type 15 Standard PC board terminal .591

PC board pattern (Copper-side view)

7.4 .291

0.65 8.2 .026 .323

0.5 .020 1.15 .045

Self clinching terminal

2.54 .100

3.5 .138 5.08 .200

5.08 .200

2.54 .100

Schematic (Bottom view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

10.16 .400

0.25 .010

5.08 .200

–

8-1.0 dia 8-.039 dia

15 .591

7.4 .291

3 4 5

10 9 8

– +

Direction indication*

Tolerance: ±0.1 ±.004

3 4 5

10 9 8

Direction indication*

*Orientation stripe located on top of relay.

0.65 8.2 .026 .323

0.5 .020 1.15 .045

3.5 .138 5.08 .200

5.08 .200

2.54 .100

0.25 .010

General tolerance: ±0.3 ±.012

Surface-mount terminal SA type

1 5.08 .039 .200

15 .591

7.4 .291 8.2 .323

0.5 .020 5.08 .200

0.65 2.54 .026 .100

0.5 .020 5.08 .200

SS type

5.08 .200

1 5.08 .039 .200

Max. 10.0 .390 5.08 .200

Self clinching terminal

3 4 5

10 9 8

3 4 5

–

+ Direction indication

Direction indication

2.54 .100

6.24 .246

0.25 .010

7.4±0.5 .291±.020

15 .591

Tolerance: ±0.1 ±.004 PC board pattern (Copper side view)

7.4 .291

12.7 .500

2.54 .100

3.5 .138 5.08 .200

2.54 .100

2.16 .085

0.65 8.2 .026 .323

0.5 .020 1.15 .045

10 9 8

7.24 .285

7.4 .291

0.65 2.54 .026 .100

3.16 .124

General tolerance: ±0.3 ±.012

2. Coil latching type Standard PC board terminal

For glue-pad

15 .591

5.08 0.25 .200 9.4±0.5 .010 .370±.020

8.2 .323 0.5 .020

0.3 .012

1 5.08 .039 .200

Max. 10.0 .390

15 .591

–

7.24 .285

7.4 .291

0.65 2.54 .026 .100

Schematic (Top view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

1.6 .0.63

3.16 .124

5.08 .200 0.25 9.4±0.5 .010 .370±.020

8.2 .323

2.54 .100

8.4 .331

15 .591

SL type

Suggested mounting pad (Top view)

5.08 .200

2.54 .100

15 .591

5.08 .200

0.25 .010 10-1.0 dia 10-.039 dia

7.4 .291

Schematic (Bottom view) 2 coil latching (Reset condition) 1

3 4 5 6

–

10 9 8 7

Direction indication*

Tolerance: ±0.1 ±.004

0.65 8.2 .026 .323

0.5 .020 1.15 .045

3.5 .138 5.08 .200

5.08 .200

2.54 .100

0.25 .010

General tolerance: ±0.3 ±.012

Surface-mount terminal SA type

Suggested mounting pad (Top view) 15 .591 8.2 .323 0.5 .020 5.08 .200

5.08 .200 0.25 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

0.5 .020 5.08 .200

SS type

0.65 2.54 .026 .100

For glue-pad

2.54 .100

3.16 .124 7.24 .285

7.4 .291 8.2 .323

5.08 .200

15 .591

5.08 0.25 .200 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

1 5.08 .039 .200

Max. 10.0 .390

2.54 .100

2.16 .085 5.08 .200

6.24 .285 0.25 .010

7.4±0.5 .291±.020

General tolerance: ±0.3 ±.012

Schematic (Top view) 2 coil latching (Reset condition) 12

Tolerance: ±0.1 ±.004

10 9 8

+ + 1

0.3 .012 1 5.08 .039 .200

Max. 10.0 .390

15 .591

0.5 .020

1.6 .0.63 7.24 .285

7.4 .291 8.2 .323

2.54 .100

3.16 .124

8.4 .331

15 .591

SL type

1 5.08 .039 .200

7.4 .291

– – 3

4 5

Direction indication

TX REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life

Ratio against the rated voltage, %V

Tested sample: TX2-5V, 10 pcs. Operating frequency: 180 cpm 3.0 100 No. of operations ×104

Switching current, A

2.0 DC resistive load

1.0

0.5 0.4 0.3

50 30V DC resistive load

30 20 10

0.2

100 90 80

Pick-up voltage

Max.

Min.

50 40 30

Drop-out voltage

Max. Min.

10 0

20 30

50 100 200 300 Contact voltage, V

1.0 2.0 Switching current, A

100 1,000 No. of operations, ×104

10,000

4. Electrical life

5-(1). Coil temperature rise

Tested sample: TX2-5V, 6 pcs. Operating frequency: 20 cpm

Tested sample: TX2-5V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F, 85°C 185°F

Change of contact resistance 100

Pick-up voltage

Max.

Min.

50 40

Drop-out voltage

Max.

30 20

80 70 60 50 40

Max.

Min.

+25°C +77°F +85°C +185°F

60 50 40 30

2A 2A

0A 0A

20 Min.

4 5 6 7 8 9 No. of operations, ×104

10 0

4 5 6 7 8 9 4 No. of operations, ×10

5-(2). Coil temperature rise

6-(1). Operate and release time (with diode)

Tested sample: TX2-48V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F

Tested sample: TX2-5V, 10 pcs.

+25°C +77°F +70°C +158°F

60 50

2A 0A

Max.

Min.

Max. Min.

100 110 120 130 140 150 No. of operations, ×104

120 130 140 150 No. of operate, ×104

5 Operate time Release time

100 110

6-(2). Operate and release time (without diode)

5 Operate and release time, ms

Operate and release time, ms

Temperature rise, °C

100

Contact resistance, mΩ

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

Operate time Release time

Max. Min.

2 Max. Min. 1

90 100 110 120 Coil applied voltage, %V

8. Distribution of set and reset voltage

9. Ambient temperature characteristics

Tested sample: TX2-5V, 50 pcs.

Tested sample: TX2-L2-12V, 30 pcs.

Tested sample: TX2-5V, 5 pcs.

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

Rate of change, %

Quantity

Drop-out voltage 20

Set voltage Reset voltage

Pick-up voltage

;;;;;;; ;;;;;;

Quantity

; ; ; ; ;;;;;;;;;; ;;;;;

7. Distribution of pick-up and drop-out voltage

10 –40 –20 5

Pick-up voltage 20 40 60 80 Ambient temperature, °C –20

–40 0

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

Drop-out voltage x x

TX 10. Distribution of contact resistance

11-(1). High frequency characteristics

11-(2). High frequency characteristics

Tested sample: TX2-5V, 30 pcs. (30 × 4 contacts)

Tested sample: TX2-12V, 2 pcs. Isolation characteristics

Tested sample: TX2-12V, 2 pcs. Insertion loss characteristics

3 4 5

10 9 8

15 10 5

0 20

Terminal Nos. 3-4, 9-10

100

0.4 0.2 10

30 40 50 Contact resistance, mΩ

100 Frequency, MHz

1,000

12-(2). Malfunctional shock (latching)

Tested sample: TX2-5V, 6 pcs

Tested sample: TX2-L2-12V, 6 pcs.

Z XX'

Y 1000m/s 2

Deenergized condition Energized condition

Z' Y Y'

Z XX'

X 1000m/s2

Z 1000m/s2

1000m/s 2 Z'

1000m/s2 X'

1000m/s 2 Z'

1000m/s2 X'

0 –5

OFF OFF Drop-out voltage

–5

OFF 2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

1,000

13-(3). Influence of adjacent mounting

Rate of change, %

Rate of change, % Rate of change, %

13-(2). Influence of adjacent mounting

Pick-up voltage

100 Frequency, MHz

1000m/s 2 Y'

13-(1). Influence of adjacent mounting

Reset state Set state

Z 1000m/s2

1000m/s 2 Y'

Y 1000m/s 2

X 1000m/s2

0.8 0.6

12-(1). Malfunctional shock (single side stable)

Z' Y Y'

1.0

5 Pick-up voltage 0

–5

Rate of change, %

Insertion loss, dB

(BOTTOM VIEW) Isolation, dB

Quantity

;;;;;;; ; ;;;;;;;;;

;;;;;;;;;; ; ;;;;;;;;

35 Terminal Nos. 4-5, 8-9

OFF

5 Drop-out voltage 0

OFF –5 OFF 0

, mm inch

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

5 Pick-up voltage

–5

ON ON

5 0

OFF Drop-out voltage OFF

–5

OFF OFF 0

, mm inch

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

, mm inch

14. Pulse dialing test

Circuit

458 Ω

0.08 µF 48V DC

–

0.08 µF

458 Ω Wire spring relay

4 3

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

Change of contact resistance 100

100

90 80

Pick-up voltage

Max. Min.

60 50 40 Drop-out voltage

30 20

Contact resistance, mΩ

Tested sample: TX2-5V, 6 pcs. (35 mA 48 V DC wire spring relay load)

Max. Min.

70 60 50

Max.

40 Min.

30 20 10

10 0

20 30 40 4 No. of operation, ×10

Note: Data of surface-mount type are the same as those of PC board terminal type.

20 30 40 No. of operations, ×104

TX Notes 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.

2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type

(2) Dimensions of plastic reel mm inch 21 ±0.6 dia. .827 ±.024 dia.

mm inch 2.0 ±0.5 .079 ±.020

Orientation (indicates PIN No.1)stripe +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

1.75 .069

4.0 .157

0.4 .016

100 ±1 dia. 3.937 ±.039 dia.

C A

Stopper (gray)

Stopper (green)

11.5 .453

D 16.0 10.0 .394 .630

TX/TX-D/TX-S -SMD relays

15.5 .610

24.0 ±0.3 ±0.2 .945 ±.012 9.2±.008 .362

Tape coming out direction

(ii) SL type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

1.75 .069

4.0 .157

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630

10.0 .394 Tape coming out direction

24.0 ±0.3 .945 ±.012

10.8±0.2 .425±.008

(iii) SS type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

2.2 dia. .087 dia. 4.0 1.75 .157 .069

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630 Tape coming out direction

8.0 24.0 ±0.3 ±.012 .315 .945 10.8±0.2 .425±.008

For Cautions for Use, see Relay Technical Information.

370 ±2 dia. 14.567 ±.079 dia. ±0.5

13 dia. .512 ±.020 dia. 24.4+20 .961+.079 0

2.0±0.2 .079±.008

TX-D TESTING

HIGH INSULATION RELAYS (Conforming to the supplementary insulation class of EN Standards (EN41003))

TX-D RELAYS

FEATURES 15 .591

8.2 .323 15 .591

• 2,000 V breakdown voltage between contact and coil. • Outstanding surge resistance. Surge withstand between open contacts: 1,500 V 10×160 µsec. (FCC part 68) Surge withstand between contact and coil: 2,500 V 2×10 µsec. (Telcordia) • High contact capacity: 2 A 30 V DC (Standard type) • M.B.B. type available • The use of gold-clad twin crossbar contacts ensures high contact reliability.

• Approved to the supplementary insulation class in the EN standards (EN41003). The insulation distance between the contact and coil meet the supplementary insulation class of the EN41003 standards as required for equipment connected to the telephone lines in Europe. Satisfies the following conditions: • Clearances: 2.0 mm .079 inch or more • Creepage distance: 2.5 mm .098 inch or more

7.4 .291

7.4 .291 8.4 .333

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Min. switching capacity ❇1 Rating

Nominal operating power

Single side stable

1 coil latching

Mechanical (at 180 cpm) Expected life (min. operations) Electrical (at 20 cpm)

Standard (B.B.M) type 2 Form C

M.B.B.type 2 Form D

100 mΩ Gold-clad silver 2 A 30 V DC 60 W

1 A 30 V DC 30 W

220 V DC 110 V DC 2A 1A 10 µA 10 mV DC 200 mW 250 mW (1.5 to 12 V DC) (1.5 to 12 V DC) 230 mW 270 mW (24 V DC) (24 V DC) 150 mW (1.5 to 12 V DC) — 170 mW (24 V DC) 107 108 105 (2 A 30 V DC resistive), 105 (1 A 30 V DC resistive) 5 ×105 (1 A 30 V DC resistive)

Notes: ❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC]) ❇2 The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40°C to +158°F.

Initial insulation resistance*1 Between open contacts Initial breakBetween contact down and coil voltage*2 Between contact sets Between contacts, Initial 10 ×160 µs surge Between contact voltage and coil, 2×10 µs Temperature rise (at 20°C) Operate time [Set time]*5 (at 20°C)

Release time [Reset time]*6 (at 20°C) M.B.B. time*12 Shock resistance Vibration resistance

Functional Destructive*9 Functional*10 Destructive

Conditions for operation, transport and storage*11 (Not freezing and condensing at low temperature) Unit weight

Standard (B.B.M) type M.B.B.type Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min.

500 Vrms for 1 min.

2,000 Vrms for 1 min. 1,000 Vrms for 1 min. 1,500 V [FCC Part 68]

–

2,500 V [Telcordia] Max. 50°C*4 Max. 50°C*3 Max. 4 ms (Approx. 2 ms) Max. 4 ms [Max. 4 ms (Approx. 2 ms) (Approx. 2 ms)] Max. 4 ms (Approx. 1 ms) Max. 4 ms [Max. 4 ms (Approx. 1 ms) (Approx. 2 ms)] — Min. 10 µs Min. 750 m/s2 {75 G}*7 Min. 500 m/s2 {50 G}*8 Min. 1,000 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm

Ambient temp. ❇2

–40°C to +85°C –40°F to +185°F

Humidity

5 to 85%R.H. Approx. 2 g .071 oz.

Remarks * *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 *11

Specifications will vary with foreign standards certification ratings. Measurement at same location as “Initial breakdown voltage” section. Detection current: 10 mA By resistive method; nominal voltage applied to the coil; contact carrying current: 2 A. By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A. Nominal voltage applied to the coil, excluding contact bounce time. Nominal voltage applied to the coil, excluding contact bounce time without diode. Half-wave pulse of sine wave: 6 ms.; detection time: 10 µs. Half-wave pulse of sine wave: 11 ms.; detection time: 10 µs. Half-wave pulse of sine wave: 6 ms. Detection time: 10 µs. Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

*12 M.B.B. time:

Min. 10 µs × Measuring condition

500 Ω 5 V DC

TX-D TYPICAL APPLICATIONS • Home appliances, and audio/visual equipment • Automotive equipment • Medical equipment

• Communications (XDSL, Transmission) • Measurement • Security

ORDERING INFORMATION 1) Standard (B.B.M.)type Ex. TXD

Contact arrangement

Surface-mount availability

2: 2 Form C

–

Operating function

Nil: Standard PC board terminal or Nil: Single side self-clinching terminal stable SA: Standard surface-mount terminal L: 1 coil latching SL: High connection reliability surface-mount terminal type SS: Space saving surface-mount terminal type

2) M.B.B.type

Ex. TXD

Contact arrangement 2: 2 Form D

Surface-mount availability

–

Terminal shape Nil: Standard PC board terminal or surfacemount type H: Self-clinching terminal

Operating function

–

Terminal shape

Nil: Standard PC board terminal or 2M: 2 M.B.B. type Nil: Standard PC self-clinching terminal board terminal SA: Standard surface-mount terminal or surfaceSL: High connection reliability surface-mount mount type terminal type H: Self- clinching SS: Space saving surface-mount terminal type terminal

4.5V

–

Coil voltage (DC)

Packing style

1.5, 3, 4.5, 5, 6, 9, 12, 24 V

4.5V

–

Coil voltage (DC) 1.5, 3, 4.5, 5, 6, 9, 12, 24 V

Nil: Tube packing Z: Tape and reel packing (Picked from the 8/9/ 10/12-pin side)

Packing style Nil: Tube packing Z: Tape and reel packing (Picked from the 8/9/ 10/12-pin side)

Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number. suffix “-X” is needed when ordering. (ex.) TXD2SA-3V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.

TYPES AND COIL DATA (at 20°C 68°F) 1. Standard (B.B.M.) type (1) Standard PC board terminal and self-clinching terminal 1. Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. V DC Standard PC board terminal TXD2-1.5V TXD2-3V TXD2-4.5V TXD2-5V TXD2-6V TXD2-9V TXD2-12V TXD2-24V

Self-clinching terminal TXD2-H-1.5V TXD2-H-3V TXD2-H-4.5V TXD2-H-5V TXD2-H-6V TXD2-H-9V TXD2-H-12V TXD2-H-24V

Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 132.7 66.7 44.4 40.0 33.3 22.2 16.7 9.6

Reset voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Nominal operating current, mA (±10%) 100.0 50.0 33.3 30.0 25.0 16.7 12.5 7.1

Coil resistance, Ω (±10%) 11 45 101 125 180 405 720 2,504

Nominal operating power, mW 200 200 200 200 200 200 200 230

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Nominal operating power, mW 150 150 150 150 150 150 150 170

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

2. 1 coil latching Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Standard PC board terminal TXD2-L-1.5V TXD2-L-3V TXD2-L-4.5V TXD2-L-5V TXD2-L-6V TXD2-L-9V TXD2-L-12V TXD2-L-24V

Self-clinching terminal TXD2-L-H-1.5V TXD2-L-H-3V TXD2-L-H-4.5V TXD2-L-H-5V TXD2-L-H-6V TXD2-L-H-9V TXD2-L-H-12V TXD2-L-H-24V

Set voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Coil resistance, Ω (±10%) 15 60 135 166 240 540 960 3,388

Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

TX-D (2) Surface-mount terminal 1. Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Tape and reel packing

Tube packing TXD2S❍-1.5V TXD2S❍-3V TXD2S❍-4.5V TXD2S❍-5V TXD2S❍-6V TXD2S❍-9V TXD2S❍-12V TXD2S❍-24V

TXD2S❍-1.5V-Z TXD2S❍-3V-Z TXD2S❍-4.5V-Z TXD2S❍-5V-Z TXD2S❍-6V-Z TXD2S❍-9V-Z TXD2S❍-12V-Z TXD2S❍-24V-Z

Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 132.7 66.7 44.4 40.0 33.3 22.2 16.7 9.6

Reset voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Nominal operating current, mA (±10%) 100.0 50.0 33.3 30.0 25.0 16.7 12.5 7.1

Coil resistance, Ω (±10%) 11 45 101 125 180 405 720 2,504

Nominal operating power, mW 200 200 200 200 200 200 200 230

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Nominal operating power, mW 150 150 150 150 150 150 150 170

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

2. 1 coil latching Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Tape and reel packing

Tube packing TXD2S❍-L-1.5V TXD2S❍-L-3V TXD2S❍-L-4.5V TXD2S❍-L-5V TXD2S❍-L-6V TXD2S❍-L-9V TXD2S❍-L-12V TXD2S❍-L-24V

TXD2S❍-L-1.5V-Z TXD2S❍-L-3V-Z TXD2S❍-L-4.5V-Z TXD2S❍-L-5V-Z TXD2S❍-L-6V-Z TXD2S❍-L-9V-Z TXD2S❍-L-12V-Z TXD2S❍-L-24V-Z

Set voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Coil resistance, Ω (±10%) 15 60 135 166 240 540 960 3,388

❍: For each surface-mounted terminal variation, input the following letter. SA type: A , SL type: L , SS type: S Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available. 2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

2. M.B.B. Type (1) Standard PC board terminal and self-clinching terminal Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Standard PC board terminal TXD2-2M-1.5V TXD2-2M-3V TXD2-2M-4.5V TXD2-2M-5V TXD2-2M-6V TXD2-2M-9V TXD2-2M-12V TXD2-2M-24V

Self-clinching terminal TXD2-2M-H-1.5V TXD2-2M-H-3V TXD2-2M-H-4.5V TXD2-2M-H-5V TXD2-2M-H-6V TXD2-2M-H-9V TXD2-2M-H-12V TXD2-2M-H-24V

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.13 2.25 3.38 3.75 4.5 6.75 9 18

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

1.13 2.25 3.38 3.75 4.5 6.75 9 18

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 166.7 83.3 55.6 50.0 41.7 27.8 20.8 11.3

Coil resistance, Ω (±10%) 9 36 81 100 144 324 576 2,133

Nominal operating power, mW 250 250 250 250 250 250 250 270

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Nominal operating power, mW 250 250 250 250 250 250 250 270

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.

(2) Surface-mount terminal Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Tube packing TXD2S❍-2M-1.5V TXD2S❍-2M-3V TXD2S❍-2M-4.5V TXD2S❍-2M-5V TXD2S❍-2M-6 TXD2S❍-2M-9 TXD2S❍-2M-12 TXD2S❍-2M-24

Tape and reel packing TXD2S❍-2M-1.5V-Z TXD2S❍-2M-3V-Z TXD2S❍-2M-4.5V-Z TXD2S❍-2M-5V-Z TXD2S❍-2M-6V-Z TXD2S❍-2M-9V-Z TXD2S❍-2M-12V-Z TXD2S❍-2M-24V-Z

Nominal operating current, mA (±10%) 166.7 83.3 55.6 50.0 41.7 27.8 20.8 11.3

Coil resistance, Ω (±10%) 9 36 81 100 144 324 576 2,133

TX-D DIMENSIONS

mm inch

1. Standard PC board terminal and self-clinching terminal Standard PC board terminal

15 .591

7.4 .291

PC board pattern (Copper side view)

2.54 .100

0.65 8.2 .026 .323

10.16 .400

5.08 .200

+ 5.08 .200

3.5 .138

0.5 .020 1.15 .045

Schematic (Bottom view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

5.08 .200

2.54 .100

0.25 .010

–

8-1.0 dia 8-.039 dia

15 .591

3 4 5

10 9 8

Direction indication*

Tolerance: ±0.1 ±.004

Self clinching terminal

– +

3 4 5

10 9 8

Direction indication*

*Orientation stride located on top of relay.

7.4 .291 0.65 8.2 .026 .323 3.5 .138

0.5 .020 1.15 .045

5.08 .200

2.54 .100

0.25 .010

General tolerance: ±0.3 ±.012

2. Surface-mount terminal SA type

Suggested mounting pad (Top view) 15 .591 8.2 .323

0.5 .020 5.08 .200

Max. 10.0 .390

0.5 .020 5.08 .200

15 .591

1 5.08 .039 .200

Max. 10.0 .390

10 9 8

–

+ 1

4 5

Direction indication

For glue-pad

2.54 .100

7.24 .285

1 5.08 .039 .200

2.54 .100

2.16 .085 5.08 0.25 .200 7.4±0.5 .010 .291±.020

0.65 2.54 .026 .100

10 9 8

3.16 .124

7.4 .291 8.2 .323

Direction indication

5.08 0.25 .200 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

15 .591

SS type

0.3 .012

7.4 .291 8.2 .323

–

1.6 .0.63 7.24 .285

5.08 .200 0.25 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

2.54 .100

3.16 .124

8.4 .331

15 .591

SL type

1 5.08 .039 .200

7.4 .291

Schematic (Top view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

General tolerance: ±0.3 ±.012

6.24 .246

Tolerance: ±0.1 ±.004

REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life

2.0 DC resistive load

1.0

0.5 0.4 0.3

No. of operations ×104

Switching current, A

3.0 100 50 30 20

30V DC resistive load

0.2

Ratio against the rated voltage, %V

Tested sample: TXD2-5V, 10 pcs. Operating frequency: 180 cpm 100 90 Pick-up voltage

Max.

70 60

Min.

50 Drop-out voltage

Max.

Min.

20 10

20 30

50 100 200 300 Contact voltage, V

1.0 2.0 Switching current, A

100 1000 No. of operations, ×104

10000

TX-D 4. Electrical life (2 A 30 V DC resistive load)

5-(1). Coil temperature rise

Tested sample: TXD2-5V, 6 pcs. Operating frequency: 20 cpm

Tested sample: TXD2-5V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F

Change of contact resistance 100

90 Pick-up voltage

Max.

Min.

60 50 Drop-out voltage

Max.

30 20

80 70 60

40 Min.

30 20

Min.

+25°C +77°F +70°C +158°F

60 50 40 2A 30

0A 0A

10 2

4 6 8 No. of operations, ×104

Tested sample: TXD2-24V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F

50 40

2A 2A

0A 0A

4 6 8 No. of operations, ×104

100

Tested sample: TXD2-5V, 10 pcs.

Tested sample: TXD2-5V, 10 pcs. 5

5 Operate time Release time 4

Max. Min.

100

110 120 Coil applied voltage, %V

Operate time Release time 4

Max. Min.

2 Max. Min.

10 0

110 120 Coil applied voltage, %V

6-(2). Operate/release time characteristics (without diode)

Operate and release time, ms

+25°C +77°F +70°C +158°F

6-(1). Operate/release time characteristics (with diode)

70 60

Operate and release time, ms

5-(2). Coil temperature rise

Temperature rise, °C

Max.

10 0

Temperature rise, °C

100 Contact resistance, mΩ

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

100

110

120

Coil applied voltage, %V

90 100 110 120 Coil applied voltage, %V

8. Distribution of set and reset voltage

9. Ambient temperature characteristics

Tested sample: TXD2-5V, 50 pcs.

Tested sample: TXD2-L-12V, 30 pcs.

Tested sample: TXD2-5V, 5 pcs. Set voltage Reset voltage

35 Pick-up voltage 15 Drop-out voltage

Quantity

30 25 20

15 5

10 5 0

Variation ratio, %

;;;;;;;;;;;;; ;;;;;;;;; ;; ; ;; ;; ;; ;; ;

7. Distribution of pick-up and drop-out voltage

–40 –20

40 x 20

Drop-out voltage x Pick-up voltage 20 40 60 80 Ambient temperature, °C –20

–40

0 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

10. Distribution of contact resistance

11-(1). High-frequency characteristics

11-(2). High-frequency characteristics

Tested sample: TXD2-5V, 30 pcs. (30 × 4 contacts)

Isolation characteristics Tested sample: TXD2-12V, 2 pcs.

Insertion loss characteristics Tested sample: TXD2-12V, 2 pcs.

25 20 15

Insertion loss, dB

; ; ; ; ; ;;;;;;

Quantity

Terminal Nos. 3-4, 9-10

;;;; ;;;;;;

Terminal Nos. 4-5, 8-9

Isolation, dB

100

0.4

30 40 50 Contact resistance, mΩ

0.8 0.6

1.0

0.2 0

100 Frequency, MHz

1,000

100 Frequency, MHz

1,000

TX-D 12-(1). Malfunctional shock (single side stable)

12-(2). Malfunctional shock (latching)

Tested sample: TXD2-5V, 6 pcs

Tested sample: TXD2-L-12V, 6 pcs. Deenergized condition Energized condition

Z XX' Y 1000m/s 2

Z' Y Y'

Reset state

Z XX' Y 1000m/s 2

Set state

X 1000m/s 2

Z 1000m/s 2

X 1000m/s 2

Z 1000m/s 2

1000m/s 2 Z'

1000m/s 2 X'

1000m/s 2 Z'

1000m/s 2 X' 1000m/s 2 Y'

1000m/s 2 Y'

Tested sample: TXD2-12V, 6 pcs.

0 –5

OFF OFF

5 Drop-out voltage 0

OFF

–5 0

5 0 Pick-up voltage –5

ON OFF

5 0 Drop-out voltage

OFF

–5 OFF 0

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

Rate of change, %

ON Pick-up voltage

Rate of change, %

13-(3). Influence of adjacent mounting

Tested sample: TXD2-12V, 6 pcs. Rate of change, %

13-(2). Influence of adjacent mounting

Tested sample: TXD2-12V, 6 pcs. Rate of change, %

13-(1). Influence of adjacent mounting

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

Pick-up voltage ON

–5

ON ON

OFF Drop-out voltage

OFF

–5

OFF OFF

, mm inch

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

Change of pick-up and drop-out voltage

Change of contact resistance

, mm inch

Circuit 458 Ω

+ 0.08 µF 48 V DC

–

0.08 µF

4 TXD 3

458 Ω Wire spring relay

100

Pick-up voltage Max. Min.

70 60 50 Drop-out voltage

40 30

Max.

Min.

10 0

Contact resistance, mΩ

Tested sample: TXD2-5V, 6 pcs.

Ratio against the rated voltage, %V

14. Actual load test (35 mA 48 V DC wire spring relay load)

80 70 60 50 40

Max Min.

30 20 10

20 30 40 No. of operation, ×104

15-(1). Distribution of M.B.B. time Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 3-4-5: ON

Terminal No. 3-4-5: OFF

60 300.5 µs x: σn-1: 55.3 µs Min.: 165 µs Max.: 415 µs

50 40 30

298.8 µs x: σn-1: 51.8 µs Min.: 205 µs Max.: 432 µs

50 40 30

22 20

12 7

350

400

450 µs max.

250

300

350

400 µs min.

150

200

250

300

350

400

450 µs max.

300

200

250

150

200

100

150

1 0

400 µs min. ~

350 ~

300 ~

250 ~

200 ~

150 ~

100 ~

20 30 40 No. of operation, ×104

TX-D 15-(2). Distribution of M.B.B. time Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 8-9-10: ON

293.4 µs x: σn-1: 60.4 µs Min.: 155 µs Max.: 445 µs

30 18 10

4 1

200

250

300

350

400

450 µs max.

100

150

200

250

300

350

400 µs min.

150

200

250

300

350

400

450 µs max.

150

400 µs min. ~

350 ~

300 ~

250 ~

200 ~

150 ~

100 ~

281.4 µs x: σn-1: 50.8 µs Min.: 420 µs Max.: 421 µs

Terminal No. 8-9-10: OFF

NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.

2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type

(2) Dimensions of plastic reel mm inch ±0.6

21 dia. .827 ±.024 dia.

mm inch Orientation (indicates PIN No.1)stripe +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

2.0 ±0.5 .079 ±.020

1.75 .069

4.0 .157

0.4 .016

100 ±1 dia. 3.937 ±.039 dia.

C A

Stopper (gray)

Stopper (green)

11.5 .453

D 16.0 10.0 .394 .630

TX/TX-D/TX-S -SMD relays

15.5 .610

24.0 ±0.3 ±0.2 .945 ±.012 9.2±.008 .362

Tape coming out direction

(ii) SL type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

1.75 .069

4.0 .157

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630

10.0 .394 Tape coming out direction

24.0 ±0.3 .945 ±.012

10.8±0.2 .425±.008

(iii) SS type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

4.0 .157

2.2 dia. .087 dia. 1.75 .069

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630 Tape coming out direction

8.0 24.0 ±0.3 ±.012 .315 .945 10.8±0.2 .425±.008

For Cautions for Use, see Relay Technical Information

370 ±2 dia. 14.567 ±.079 dia. 13 ±0.5 dia. .512 ±.020 dia. 24.4+20 .961+.079 0

2.0±0.2 .079±.008

TX-S

TESTING

TX-S RELAYS

SMALL POLARIZED RELAY WITH HIGH SENSITIVITY 50mW

15 .591

FEATURES

7.4 .291 8.2 .323

15 .591

8.4 .331

SA type

mm inch

Outstanding surge resistance Surge withstand between open contacts: 1,500V 10×160µs (FCC part 68) Surge withstand between contacts and coil: 2,500V 2×10µs (Telcordia)

High sensitivity • 50mW nominal operating power (single side stable 1.5-12V) • Useful for electric-power-saving Approx. 0.3µV low thermal electromotive force

7.4 .291

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A ) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1 Single side stable Nominal operating power

1 coil latching 2 coil latching

Expected life (min. operations)

Mechanical (at 180 cpm) Electrical 1 A 30 V DC (at 20 cpm) resistive

2 Form C

Initial insulation resistance*1 Between open contacts Initial breakdown Between contact sets voltage*2 Between contacts and coil Between open contacts Initial surge (10 × 160µs) voltage Between contacts and coil (2 × 10 µs) Operate time [Set time]*3 (at 20°C)(at nominal voltage) Release time (without diode) [Reset time]*3 (at 20°C)(at nominal voltage) Temperature rise*4 (at 20°C) Functional*5 Shock resistance Destructive*6

100 mΩ Gold-clad silver alloy 1 A 30 V DC 30 W (DC) 110 V DC 1A 10 µA 10 mV DC 50 mW (1.5 to 12 V DC) 70 mW (24 V DC) 35 mW (1.5 to 12 V DC) 50 mW (24 V DC) 70 mW (1.5 to 12 V DC) 150 mW (24 V DC) 5×107

Min. 1,000 MW (at 500 V DC) 750 Vrms for 1min. 1,000 Vrms for 1min. 1,800 Vrms for 1min. 1,500V (FCC Part 68) 2,500V (Telcordia) Max. 5 ms (Approx. 3 ms) [Max. 5 ms (Approx. 3 ms)] Max. 5 ms (Approx. 1.5 ms) [Max. 5 ms (Approx. 3 ms)] Max. 50°C Min. 750 m/s2 {75 G} Min. 1,000 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm –40°C to +70°C –40°F to +158°F

Functional*7 Vibration resistance

2×105

Destructive Conditions for operation, Ambient temperature transport and storage*8 (Not freezing and condensing Humidity at low temperature) Unit weight

Remarks * Speci cations will v ary with foreign standards certi cation r atings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 Detection current: 10mA *3 Excluding contact bounce time. *4 By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A.

5 to 85% R.H. Approx. 2 g .071 oz

*5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

TYPICAL APPLICATIONS • Automotive equipment • Medical equipment

• Security • Home appliances, and audio/visual equipment

• Communications (XDSL, Transmission) • Measurement

ORDERING INFORMATION Ex. TXS

Contact arrangement

Surface-mount availability

2: 2 Form C

–

Operating function Terminal shape Nil: Single side Nil: stable L: 1 coil latching L2: 2 coil latching

–

Coil voltage (DC)

Nil: Standard PC 1.5, 3, 4.5, 6, 9, board terminal or 12, 24 V surface-mount terminal H: Self-clinching terminal

Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number suffix “-X” is needed when ordering. (ex.) TXS2SA-3 V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.

Packing style Nil: Tube packing Z: Tape and reel packing(piked from the 8/9/10/12 -pin side

TX-S TYPES AND COIL DATA (at 20°C 68°F) 1) Standard PC board terminal type and self-clinching terminal type Single side stable Part No. Standard PC board terminal TXS2-1.5V TXS2-3V TXS2-4.5V TXS2-6V TXS2-9V TXS2-12V TXS2-24V

Self-clinching terminal TXS2-H-1.5V TXS2-H-3V TXS2-H-4.5V TXS2-H-6V TXS2-H-9V TXS2-H-12V TXS2-H-24V

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.5 3 4.5 6 9 12 24

1.2 2.4 3.6 4.8 7.2 9.6 19.2

0.15 0.3 0.45 0.6 0.9 1.2 2.4

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (Max.)

Nominal operating current, mA (±10%) 33.3 16.7 11.1 8.3 5.6 4.2 2.9

Nominal operating power, mW 50 50 50 50 50 50 70

Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36

64.3 257 579 1,029

Nominal operating power, mW 35 35 35 35

Max. Allowable voltage, V DC 2.2 4.5 6.7 9

35 35 50

13.5 18 36

Nominal operating power, mW 70 70 70 70 70 70 150

Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36

Coil resistance, Ω (±10%) 45 180 405 720 1,620 2,880 8,229

1 coil latching Part No.

TXS2-L-1.5V TXS2-L-3V TXS2-L-4.5V TXS2-L-6V

TXS2-L-H-1.5V TXS2-L-H-3V TXS2-L-H-4.5V TXS2-L-H-6V

1.5 3 4.5 6

1.2 2.4 3.6 4.8

Nominal operating current, mA (±10%) 23.3 11.7 7.8 5.8

TXS2-L-9V TXS2-L-12V TXS2-L-24V

TXS2-L-H-9V TXS2-L-H-12V TXS2-L-H-24V

9 12 24

7.2 9.6 19.2

3.9 2.9 2.1

2,314 4,114 11,520

Self-clinching terminal

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (Max.)

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

TXS2-L2-H-1.5V TXS2-L2-H-3V TXS2-L2-H-4.5V TXS2-L2-H-6V TXS2-L2-H-9V TXS2-L2-H-12V TXS2-L2-H-24V

1.5 3 4.5 6 9 12 24

1.2 2.4 3.6 4.8 7.2 9.6 19.2

46.7 23.3 15.6 11.7 7.8 5.8 6.3

32.1 129 289 514 1,157 2,057 3,840

Standard PC board terminal

Self-clinching terminal

Coil resistance, Ω (±10%)

2 coil latching Part No. Standard PC board terminal TXS2-L2-1.5V TXS2-L2-3V TXS2-L2-4.5V TXS2-L2-6V TXS2-L2-9V TXS2-L2-12V TXS2-L2-24V Notes: 1. Speci ed v alue of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.

2) Surface-mount terminal type Single side stable Part No. TXS2S❍-1.5 V TXS2S❍-3 V TXS2S❍-4.5 V TXS2S❍-6 V TXS2S❍-9 V TXS2S❍-12 V TXS2S❍-24 V

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.5 3 4.5 6 9 12 24

1.2 2.4 3.6 4.8 7.2 9.6 19.2

0.15 0.3 0.45 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 33.3 16.7 11.1 8.3 5.6 4.2 2.9

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. Allowable voltage, V DC

45 180 405 720 1,620 2,880 8,229

50 50 50 50 50 50 70

2.2 4.5 6.7 9 13.5 18 36

TX-S 1 coil latching Part No.

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

TXS2S❍-L-1.5 V TXS2S❍-L-3 V TXS2S❍-L-4.5 V TXS2S❍-L-6 V TXS2S❍-L-9 V TXS2S❍-L-12 V TXS2S❍-L-24 V

1.5 3 4.5 6 9 12 24

1.2 2.4 3.6 4.8 7.2 9.6 19.2

Part No.

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

TXS2S❍-L2-1.5 V TXS2S❍-L2-3 V TXS2S❍-L2-4.5 V TXS2S❍-L2-6 V TXS2S❍-L2-9 V TXS2S❍-L2-12 V TXS2S❍-L2-24 V

1.5 3 4.5 6 9 12 24

1.2 2.4 3.6 4.8 7.2 9.6 19.2

Nominal operating current, mA (±10%) 23.3 11.7 7.8 5.8 3.9 2.9 2.1

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. Allowable voltage, V DC

64.3 257 579 1,029 2,314 4,114 11,520

35 35 35 35 35 35 50

2.2 4.5 6.7 9 13.5 18 36

Coil resistance, Ω (±10%)

Nominal operating power, mW

32.1 129 289 514 1,157 2,057 3,840

70 70 70 70 70 70 150

2 coil latching Nominal operating current, mA (±10%) 46.7 23.3 15.6 11.7 7.8 5.8 6.3

Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36

❍: For each surface-mounted terminal variation, input the following letter. SA type: A, SL type: L, SS type: S

Notes: 1. Speci ed v alue of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 40 pcs. ; Case: 1,000 pcs. 3. Tape and reel packing is also available for surface-mount type by request. Part number suf x "-X" or "-Z" is needed when orde ring. In this case, "X" or "Z" are not marked on the relay. Quantity in tape and reel: 500 pcs. • TXS2SA-L-3V-Z (ex.) • TXS2SA-3V-X Picked from the 1/3/4/5-pin side Picked from the 8/9/10/12-pin side

DIMENSIONS

mm inch

1. Single side stable and 1 coil latching type Standard PC board terminal

15 .591

PC board pattern (Copper-side view) 7.4 .291 2.54 .100

0.65 8.2 .026 .323

0.5 .020 1.15 .045

10.16 .400

5.08 .200

2.54 .100

+ 5.08 .200

3.5 .138 0.25 .010

Schematic (Bottom view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

8-1.0 dia 8-.039 dia

–

15 .591

7.4 .291 0.65 8.2 .026 .323

0.5 .020 1.15 .045

3.5 .138 5.08 .200

2.54 .100

5.08 .200

3 4 5

10 9 8

Direction indication*

Tolerance: ±0.1 ±.004

Self clinching terminal

0.25 .010

General tolerance: ±0.3 ±.012

– +

3 4 5

10 9 8

Direction indication*

*Orientation stripe located on top of relay.

TX-S Surface-mount terminal SA type

mm inch Suggested mounting pad (Top view) 15 .591 8.2 .323 0.5 .020 5.08 .200

0.5 .020 5.08 .200

SS type

15 .591

0.5 .020 5.08 .200

7.4±0.5 .291±.020

Tolerance: ±0.1 ±.004

PC board pattern (Copper side view) 15 .591

7.4 .291

12.7 .500

2.54 .100

0.65 8.2 .026 .323

5.08 .200

3.5 .138 5.08 .200

2.54 .100

0.25 .010

10-1.0 dia 10-.039 dia

Schematic (Bottom view) 2 coil latching (Reset condition) 1

3 4 5 6

–

10 9 8 7

Direction indication*

Tolerance: ±0.1 ±.004

Self clinching terminal

15 .591

7.4 .291 0.65 8.2 .026 .323

0.5 .020 1.15 .045

3.5 .138 5.08 .200

5.08 .200

2.54 .100

0.25 .010

General tolerance: ±0.3 ±.012

Surface-mount terminal SA type

Suggested mounting pad (Top view) 15 .591

5.08 .200

0.5 .020 5.08 .200

SS type

0.65 2.54 .026 .100

5.08 .200

0.65 2.54 .026 .100

For glue-pad

2.54 .100

3.16 .124 7.24 .285

7.4 .291 8.2 .323

15 .591

5.08 0.25 .200 9.4±0.5 .010 .370±.020

15 .591

0.5 .020

1 5.08 .039 .200

Max. 10.0 .390

1 5.08 .039 .200

Max. 10.0 .390

2.54 .100

2.16 .085 5.08 .200

6.24 .285 0.25 .010

7.4±0.5 .291±.020

General tolerance: ±0.3 ±.012

Schematic (Top view) 2 coil latching (Reset condition) 12

Tolerance: ±0.1 ±.004

10 9 8

– –

+ + 1

0.3 .012

7.4 .291 8.2 .323

1.6 .0.63 7.24 .285

5.08 .200 0.25 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

2.54 .100

3.16 .124

8.4 .331

15 .591

SL type

1 5.08 .039 .200

7.4 .291 8.2 .323

0.5 .020

3 4 5

Direction indication

6.24 .246

0.25 .010

2. Coil latching type Standard PC board terminal

5.08 .200

–

2.54 .100

2.16 .085 5.08 .200

General tolerance: ±0.3 ±.012

0.5 .020 1.15 .045

10 9 8

7.24 .285

1 5.08 .039 .200

Max. 10.0 .390

0.65 2.54 .026 .100

3 4 5

3.16 .124

7.4 .291 8.2 .323

2.54 .100

5.08 0.25 .200 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

10 9 8

For glue-pad

15 .591

1 5.08 .039 .200

Max. 10.0 .390

Direction indication

0.3 .012

7.4 .291 8.2 .323

–

1.6 .0.63 7.24 .285

5.08 .200 0.25 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

2.54 .100

3.16 .124

8.4 .331

15 .591

SL type

1 5.08 .039 .200

7.4 .291

Schematic (Top view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

4 5

Direction indication

TX-S REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life

No. of operations ×104

Contact current, A

DC resistive load 1.0

0.5 0.4 0.3

Ratio against the rated voltage, %V

Tested sample: TXS2-4.5V, 10 pcs. Operating frequency: 180 cpm

30V DC resistive load

100

0.2

100 90 80 Pick-up voltage

Max.

Min.

50 40 Drop-out voltage

Max.

Min.

10 30

100 200 Contact voltage, V

0.5

1.0 Switching current, A

100 1,000 5,000 No. of operations, ×104

4. Electrical life (1 A 30 V DC resistive load)

5-(1). Coil temperature rise

Tested sample: TXS2-4.5V, 6 pcs. Operating frequency: 20 cpm

Tested sample: TXS2-4.5V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F

Change of contact resistance 100

80 Pick-up voltage

Max. Min.

60 50 40 30

80 70 60 50

Max.

Max. Min.

1A 1A 0A 0A

Min.

10 0

+25°C +77°F :x +70°C +158°F :x

Drop-out voltage

30 Temperature rise, °C

100 Contact resistance, mΩ

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

10 0

No. of operations, ×10

100 110

120

130

140 150 160

Coil applied voltage, %V

5-(2). Coil temperature rise

6-(1). Operate and release time (with diode)

6-(2). Operate and release time (without diode)

Tested sample: TXS2-24V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F

Tested sample: TXS2-4.5V, 10 pcs.

20 1A 1A 0A 0A

7 Operate time Release time

6 5

Max.

Min.

Max. Min.

2 1

90 100 110

120

130

140 150

Coil applied voltage, %V

Operate time Release time

6 5 4

Max. Min.

3 2 1

160

Operate and release time, ms

+25°C +77°F :x +70°C +158°F :x

Operate and release time, ms

Temperature rise, °C

Max. Min.

100 90 110 120 Coil applied voltage, %V

100

110

120

Coil applied voltage, %V

7. Distribution of pick-up and drop-out voltage

8. Distribution of set and reset voltage

9. Ambient temperature characteristics

Tested sample: TXS2-4.5V, 50 pcs.

Tested sample: TXS2-4.5V 30 pcs.

Tested sample: TXS2-4.5V 5 pcs. Set voltage Reset voltage

45 Drop-out voltage 15

35 30

Pick-up voltage

Quantity

Rate of change, %

–40 –20

20 15

30 20

Pick-up voltage 20 40 60 80 Ambient –10 temperature, °C –20 –30

20 40 60 80 100 Ratio against the rated voltage, %V

100

Ratio against the rated voltage, %V

x x

10 5

Drop-out voltage

TX-S 10. Distribution of contact resistance

11-(1). High frequency characteristics

11-(2). High frequency characteristics

Tested sample: TXS2-4.5V, 50 pcs. (50x4 contacts)

Tested sample: TXS2-4.5V, 2 pcs. Isolation characteristics

Tested sample: TXS2-4.5V, 2 pcs. Insertion loss characteristics

100

3 4 5

10 9 8

(BOTTOM VIEW)

Quantity

70 Terminal No. 4-5, 8-9 60

Terminal No. 3-4, 9-10

Insertion loss, dB

Isolation, dB

100

1.0 0.8

40 50

0.6 0.4

0.2

10 0

20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50

100

1,000

100 Frequency, MHz

Frequency, MHz

Contact resistance, mΩ

12-(1). Malfunctional shock (single side stable)

12-(2). Malfunctional shock (latching)

13. Thermal electromotive force

Tested sample: TXS2-4.5V, 6 pcs.

Tested sample: TXS2-L2-4.5V, 6 pcs.

Tested sample: TXS2-4.5V, 10 pcs.

Y Y’

X’

Deenergized condition Energized condition

Z Z’

1000m/s2 Z 1000m/s2

1000m/s2

1000m/s2 Z’

1000m/s X’

18 16

Z 1000m/s2

1000m/s2

1000m/s2 Z’

Reset state Set state

Y 1000m/s2

Y Y’

X’

1000m/s X’

1000m/s2 Y’

Quantity

Z Z’

1,000

12 10 8

6 4

1000m/s2 Y’

2 0

0.15

0.25

0.35

0.45

0.55

Thermal electromotive force, µV

14-(2). In uence of adjacent mounting

14-(3). In uence of adjacent mounting

Tested sample: TXS2-4.5V, 6 pcs.

10 5 Pick-up voltage

Drop-out voltage

Rate of change, %

0 OFF OFF

–5

OFF

–15

ON 10 ON

5 Pick-up voltage

0 –5

–15

2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance , mm inch

ON 10 ON 5

Pick-up voltage

ON ON

Drop-out voltage OFF –5 OFF

–10

OFF OFF 0

OFF

Drop-out voltage

–10

Rate of change, %

14-(1). In uence of adjacent mounting

–15

2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance , mm inch

OFF 0

OFF 2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance , mm inch

15. Pulse dialing test

0.08 µF DC48V

–

458Ω 0.08 µF

458Ω Wire spring relay

4 3

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

Change of contact resistance

100

90 80

Pick-up voltage Max. Min.

70 60 50 40 Drop-out voltage

Contact resistance, mΩ

Tested sample: TXS2-4.5V, 6 pcs. (35 mA 48V DC wire spring relay load)

Max. Min.

20 10 0

90 80 70 60 50 40

Max.

Min.

20 10

No. of operation, ×10

Note: Data of surface-mount type are the same as those of PC board terminal type.

No. of operation, ×104

TX-S NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the gure belo w.

2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type

(2) Dimensions of plastic reel mm inch ±0.6

21 dia. .827 ±.024 dia.

mm inch Orientation (indicates PIN No.1)stripe +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

2.0 ±0.5 .079 ±.020

1.75 .069

4.0 .157

0.4 .016

100 ±1 dia. 3.937 ±.039 dia.

C A

Stopper (gray)

Stopper (green)

11.5 .453

D 16.0 10.0 .394 .630

TX/TX-D/TX-S -SMD relays

15.5 .610

24.0 ±0.3 ±0.2 .945 ±.012 9.2±.008 .362

Tape coming out direction

(ii) SL type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

1.75 .069

4.0 .157

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630

10.0 .394 Tape coming out direction

24.0 ±0.3 .945 ±.012

10.8±0.2 .425±.008

(iii) SS type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

4.0 .157

2.2 dia. .087 dia. 1.75 .069

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630 Tape coming out direction

8.0 24.0 ±0.3 ±.012 .315 .945 10.8±0.2 .425±.008

370 ±2 dia. 14.567 ±.079 dia. 13 ±0.5 dia. .512 ±.020 dia. 24.4+20 .961+.079 0

2.0±0.2 .079±.008