Panasonic TQ Relays

TQ TESTING

LOW PROFILE 2 FORM C RELAY

TQ RELAYS

FEATURES 26.7 1.051

9 .354 5+0.4 –0.2 .197+.016 –.008

9 .354

14 .551

5+0.4 –0.2 .197+.016 –.008

mm inch

• High sensitivity: 2 Form C: 140 mW power consumption (single side stable type) 4 Form C: 280 mW power consumption (single side stable type) • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic washing • Self-clinching terminal also available • M.B.B. contact types available

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max.

(By voltage drop 6 V DC 1A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1

Single side stable

Nominal operating 1 coil latching power

2 coil latching Mechanical (at 180 cpm) Expected 1 A 30 V DC life (min. Electrical (at 20 cpm) resistive opera(1 A 30 V DC 0.5 A 125 V AC tions) resistive) resistive

Standard (B.B.M) type 2 Form C 4 Form C

M.B.B.type 2 Form D

Initial insulation resistance*1 Between open contacts

50 mΩ Gold-clad silver 1 A 30 V DC 1 A 30 V 0.5 A 125 V AC DC 30 W, 62.5 V A

30 W

110 V DC, 125 V AC 110 V DC 1A 10 µA 10 mV DC 140 mW (3 to 12 V DC) 280 mW 200 mW (3 to 24 V DC) 200 mW 400 mW (24 V DC) (48 V DC) 300 mW (48 V DC) 100 mW (3 to 12 V DC) 200 mW — 150 mW (24 V DC) 200 mW (3 to 12 V DC) 400 mW — 300 mW (24 V DC) 108 107 2×105

105

105

—

Note:

Initial breakdown voltage

Between contact and coil Between contact sets FCC surge voltage between open contacts Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) M.B.B. time*8 Temperature rise*2 (at 20°C) Functional*5 Shock resistance Destructive*6 Vibration resistance

Functional*7 Destructive

Conditions for Ambient operation, transtemperature port and storage*9 (Not freezing and condensing at low Humidity temperature) 2 Form C: Unit weight 4 Form C:

Standard M.B.B.type (B.B.M) type Min. 1,000 MΩ (at 500 V DC) 750 Vrms for 1 min. 300 Vrms for 1 min.

(Detection current: (Detection current: 10 mA) 10 mA) 1,000 Vrms for 1 min.

(Detection current: 10 mA) 1,000 Vrms for 1 min.

(Detection current: 10 mA) 1,500 V Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)] Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)] — Min. 10 µs.

Max. 50°C Min. 490 m/s2 {50G} Min. 980 m/s2 {100G} 176.4 m/s2 {18G}, 10 to 55 Hz at double amplitude of 3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +70°C –40°C to +50°C –40°F to +158°F –40°F to +122°F 5 to 85% R.H. Approx. 1.5 g .053 oz Approx. 3 g .106 oz.

—

❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC])

Remarks

*8 M.B.B. time:

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs.

Min. 10 µs

Measuring condition 500 Ω 5 V DC

*9 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

TQ ORDERING INFORMATION EX. TQ Contact arrangement 2: 2 Form C 4: 4 Form C

2

H

L2

2M

Operating function

Terminal shape

3V MBB function

Nil: Standard PC board Nil: Single side stable Nil: Standard L: 1 coil latching terminal (B.B.M.) type H: Self-clinching terminal L2: 2 coil latching 2M: 2M.B.B. type

Coil voltage (DC) 3, 4.5, 5, 6, 9, 12, 24, 48* V

*48 V coil type: Single side stable only Notes: 1. AgPd stationary contact types available for high resistance against contact sticking.

When ordering, please add suffix “–3” like TQ2-12V-3.

2. M.B.B. contact types are available only for TQ2 type.

TYPES AND COIL DATA (at 20°C 68°F) 1. Standard (B.B.M.) type 2 Form C type 1. Single side stable Part No. Standard PC board terminal TQ2-3 V TQ2-4.5 V TQ2-5 V TQ2-6 V TQ2-9 V TQ2-12 V TQ2-24 V TQ2-48 V

Self-clinching terminal TQ2H-3 V TQ2H-4.5 V TQ2H-5 V TQ2H-6 V TQ2H-9 V TQ2H-12 V TQ2H-24 V TQ2H-48 V

Nominal operating current, mA (±10%) 46.7 31.1 28.1 23.3 15.5 11.7 8.3 6.25

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24 48

2.25 3.38 3.75 4.5 6.75 9 18 36

0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

2.25 3.38 3.75 4.5 6.75 9 18

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

2.25 3.38 3.75 4.5 6.75 9 18

66.7 44.4 40 33.3 22.2 16.7 12.5

45 101.2 125 180 405 720 1,920

64.3 144.6 178 257 579 1,028 2,880 7,680

Nominal operating power, mW 140 140 140 140 140 140 200 300

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 57.6

Nominal operating power, mW 100 100 100 100 100 100 150

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

Nominal operating power, mW 200 200 200 200 200 200 300

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 28.8

2. 1 Coil latching Part No. Standard PC board terminal TQ2-L-3 V TQ2-L-4.5 V TQ2-L-5 V TQ2-L-6 V TQ2-L-9 V TQ2-L-12 V TQ2-L-24 V

Self-clinching terminal TQ2H-L-3 V TQ2H-L-4.5 V TQ2H-L-5 V TQ2H-L-6 V TQ2H-L-9 V TQ2H-L-12 V TQ2H-L-24 V

Nominal operating current, mA (±10%) 33.3 22.2 20 16.7 11.1 8.3 6.3

Coil resistance, Ω (±10%) 90 202.5 250 360 810 1,440 3,840

3. 2 Coil latching Part No. Standard PC board terminal TQ2-L2-3 V TQ2-L2-4.5 V TQ2-L2-5 V TQ2-L2-6 V TQ2-L2-9 V TQ2-L2-12 V TQ2-L2-24 V

Self-clinching terminal TQ2H-L2-3 V TQ2H-L2-4.5 V TQ2H-L2-5 V TQ2H-L2-6 V TQ2H-L2-9 V TQ2H-L2-12 V TQ2H-L2-24 V

Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.

3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay.

4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

TQ 4 Form C type 1. Single side stable Part No. Standard PC board terminal TQ4-3 V TQ4-4.5 V TQ4-5 V TQ4-6 V TQ4-9 V TQ4-12 V TQ4-24 V TQ4-48 V

Self-clinching terminal TQ4H-3 V TQ4H-4.5 V TQ4H-5 V TQ4H-6 V TQ4H-9 V TQ4H-12 V TQ4H-24 V TQ4H-48 V

Nominal operating current, mA (±10%) 93.8 62.2 56.2 46.5 31.1 23.3 11.7 8.3

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24 48

2.25 3.38 3.75 4.5 6.75 9 18 36

0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

2.25 3.38 3.75 4.5 6.75 9 18

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

Nominal operating current, mA (±10%)

Coil resistance, Ω (±10%)

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

2.25 3.38 3.75 4.5 6.75 9 18

133 88.9 80 66.6 44.4 33.3 16.7

22.5 50.6 62.5 90 202.5 360 1,440

32 72.3 89 129 289 514 2,056 5,760

Nominal operating power, mW 280 280 280 280 280 280 280 400

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 57.6

Nominal operating power, mW 200 200 200 200 200 200 200

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

Nominal operating power, mW 400 400 400 400 400 400 400

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

2. 1 Coil latching Part No. Standard PC board terminal TQ4-L-3 V TQ4-L-4.5 V TQ4-L-5 V TQ4-L-6 V TQ4-L-9 V TQ4-L-12 V TQ4-L-24 V

Self-clinching terminal TQ4H-L-3 V TQ4H-L-4.5 V TQ4H-L-5 V TQ4H-L-6 V TQ4H-L-9 V TQ4H-L-12 V TQ4H-L-24 V

Nominal operating current, mA (±10%) 66.6 44.4 40 33.3 22.2 16.7 8.3

Coil resistance, Ω (±10%) 45 101.2 125 180 405 720 2,880

3. 2 Coil latching Part No. Standard PC board terminal TQ4-L2-3 V TQ4-L2-4.5 V TQ4-L2-5 V TQ4-L2-6 V TQ4-L2-9 V TQ4-L2-12 V TQ4-L2-24 V

Self-clinching terminal TQ4H-L2-3 V TQ4H-L2-4.5 V TQ4H-L2-5 V TQ4H-L2-6 V TQ4H-L2-9 V TQ4H-L2-12 V TQ4H-L2-24 V

Notes: 1. Specified value of the pick-up, drop-out, voltage is with the condition of square wave coil pulse.

2. Standard packing: Tube: 25 pcs.; Case: 500 pcs.

3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay.

4. 1 coil latching and 2 coil latching types are also available by request. Please consult us for details.

5. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.

2. M.B.B. type Single side stable Part No. Standard PC board terminal TQ2-2M-3 V TQ2-2M-4.5 V TQ2-2M-5 V TQ2-2M-6 V TQ2-2M-9 V TQ2-2M-12 V TQ2-2M-24 V

Self-clinching terminal

Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

TQ2H-2M-3 V TQ2H-2M-4.5 V TQ2H-2M-5 V TQ2H-2M-6 V TQ2H-2M-9 V TQ2H-2M-12 V TQ2H-2M-24 V

3 4.5 5 6 9 12 24

2.4 3.6 4 4.8 7.2 9.6 19.2

0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 66.7 44.4 40 33.3 22.2 16.7 8.3

Coil resistance, Ω (±10%) 45 101 125 180 405 720 2,880

Nominal operating power, mW 200 200 200 200 200 200 200

Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36

Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.

3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay.

4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3.

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

TQ DIMENSIONS

mm inch

1) 2 Form C, 2 Form D Standard PC board terminal 4.75 .187

14 .551

PC board pattern (Copper-side view)

9 .354

10.16 .400

2.54 .100

10-1.0 dia.

10-.039 dia

5 +0.4 −0.2 .197 +.016 −.008

2.54 .100 7.62 .300

3.5 .138 0.25 .010

2.54 .100

0.5 .020

0.25 .010

7.62 .300

Tolerance: ±0.1 ±.004

Self-clinching terminal 4.75 .187

14 .551

Schematic (Bottom view) • Single side stable • 1-coil latching (Deenergized condition) (Reset condition)

9 .354

5 +0.4 −0.2 .197 +.016 −.008

1

+

3.5 .138 0.25 .010

2.54 .100

0.5 .020

0.25 .010

7.62 .300

2

3

4

5

−

−

1

2

3

4

• 2-coil latching (Reset condition)

5

1

8

7

6

10 9

Direction indication*

3

4

8

7

6

10 9

Direction indication*

5

− −

+

+ 10 9

2

+

8

7

6

Direction indication*

*Orientation stripe typical-located on top of relay

General tolerance: ±0.3 ±.012

2) 4 Form C Standard PC board terminal 26.7 1.051

4.75 .187

PC board pattern (Copper-side view)

9 .354

5 +0.4 −0.2 .197 +.016 −.008

22.86 .900 2.54 .100

5.08 .200

16-1.0 dia.

16-.039 dia

3.5 .138 0.25 .010

5.08 .200

0.5 .020

2.54 .100

7.62 .300

2.54 .100 7.62 .300

0.25 .010

Tolerance: ±0.1 ±.004

Self-clinching terminal 26.7 1.051

4.75 .187 5 .197

Schematic (Bottom view) • Single side stable • 1-coil latching (Deenergized condition) (Reset condition)

9 .354

+0.4 −0.2 +.016 −.008

+

3.5 .138 0.25 .010

5.08 .200

0.5 .020

2.54 .100

7.62 .300

0.25 .010

1

3 4 5 6 7 8 10

20

181716 151413 11

Direction indication*

−

−

1

3 4 5 6 7 8 10

20

181716 151413 11

Direction indication*

+

• 2-coil latching (Reset condition) 1

3 4 5 6 7 8 10

−

+ 20

181716 151413 11

−

+

Direction indication*

*Orientation stripe typical-located on top of relay

General tolerance: ±0.3 ±.012

REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life

1.0

0.5 0.4 0.3

30 V DC resistive load 100

125 V AC resistive load 10

0.2

30

100 200 Switching voltage,V

0

0.5 1.0 Switching current, A

Ratio against the rated voltage, %V

DC load (cosϕ=1) AC load (cosϕ=1)

No. of operations, ×104

Switching current, A

Tested sample: TQ2-12V, 10 pcs.

100 90 80

Pick-up voltage Max. Min.

70 60 50 40 Drop-out voltage

30

Max.

20 Min.

10 0

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

10

100 1,000 10,000 No. of operations, ×104

TQ 4.-(1) Electrical life (DC load)

4.-(2) Electrical life (AC load)

Tested sample: TQ2-12V, 6 pcs.

Condition: 1 A 30 V DC resistive load, 20 cpm

Tested sample: TQ2-12V, 6 pcs.

Condition: 0.5 A 125 V AC resistive load, 20 cpm

Change of contact resistance 100

90

90

Pick-up voltage

Max.

70

Min.

60 50 40

Drop-out voltage Max.

30 20

80 70 60 50

Max.

40 Min.

30

Min.

20

10

10 0

5

10 15 No. of operations, ×104

20

Change of contact resistance

0

5

10 15 No. of operations, ×104

50 40

Max.

30

Min.

Min.

50 40

Drop-out voltage

60 50

1A

40

1A 0A

30

Max.

30 Min.

20 10 0

20

Nominal coil voltage 3 to 12 V DC type 24 V DC type

Max.

60

5 No. of operations, ×104

Tested sample: TQ4-12V Measured portion: Inside the coil Ambient temperature: 30°C 86°F

Temperature rise, C°

60

Pick-up voltage

70

5.-(2) Coil temperature rise (4C)

70

70

80

Tested sample: TQ2-12V Measured portion: Inside the coil Ambient temperature: 30°C 86°F

90 80

90

5.-(1) Coil temperature rise (2C)

100 Contact resistance, mΩ

100

10

70 Temperature rise, C°

80

Change of pick-up and drop-out voltage Ratio against the rated voltage, %V

100 Contact resistance, mΩ

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

60 50 1A

40

0A

30

20

20

10

10

20 10 0

5 No. of operations, ×104

0

10

0

100 110 120 130 140 150 Coil applied voltage, %V

100 110 120 130 140 150 Coil applied voltage, %V

6.-(1) Operate/release time characteristics

6.-(2) Operate/release time characteristics

7. Distribution of pick-up and drop-out voltages

Tested sample: TQ2-12V, 10 pcs.

Tested sample: TQ4-12V, 10 pcs.

Tested sample: TQ2-12V, 50 pcs.

6

4 3 Operate time 2 Max. Min. Max. Min.

Release time

1

30 Pick-up voltage Drop-out voltage

5 4

20

3 Operate time 2

10

1 Release time

0

80

0

90 100 110 120 Coil applied voltage, %V

Quantity

5

Operate/release time, ms

Operate/release time, ms

6

80

Max. Min. Max. Min.

90 100 110 120 Coil applied voltage, %V

0 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

9. Ambient temperature characteristics

10. Distribution of contact resistance

Tested sample: TQ2-L2-12V, 35 pcs.

Tested sample: TQ2-12V, 5 pcs.

Tested sample: TQ2-12V, 30 pcs. (30×4 contacts)

;yy;y;y;y;y; y;y;y;y;y;y; ;yy;y; y; y; y; y;

30 Set voltage

20

10

0

40

Drop-out voltage

–40 –20

0

− x − x

20

;y;y;y;y;y;y ;y;y;y;y;;yy;y;;yy

Quantity

Reset voltage

40

Pick-up voltage 20 40 60 80 Ambient temperature,°C –20

30 Quantity

Variation ratio,%

8. Distribution of set and reset voltage

20

10 –40

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

0

30

40 50 Contact resistance, mΩ

TQ 11.-(1) High-frequency characteristics

11.-(2) High-frequency characteristics

11.-(3) High-frequency characteristics

Isolation characteristics

Insertion loss characteristics

V.S.W.R. 3.0

50

10

100 Frequency,MHz

2.4 V.S.W.R.

100

2.6

1.0 0.8

1.4

0.2

1.2

0

1,000

10

100 Frequency,MHz

Tested sample: TQ2-L-12V, 6 pcs.

Y 980m/s

2

Deenergized condition Energized condition Z 980m/s2

X 980m/s2

980m/s2 , Z

Z Y, Y

196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y

,Z XX

,

Y 980m/s2

Reset state Set state Z 980m/s2

X 980m/s2

196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y

980m/s2 , Z

980m/s2 , X

1.0

1,000

12.-(2) Malfunctional shock (latching)

,

1.8 1.6

Tested sample: TQ2-12V, 6 pcs.

,Z XX

2.0

0.4

12.-(1) Malfunctional shock (single side stable)

Z Y, Y

2.2

0.6

980m/s2 , X

0

10

13.-(3) Influence of adjacent mounting

1

Pick-up voltage

ON

ON

0 –10 ON OFF OFF

10

Drop-out voltage

0 OFF

–10 0

13.-(2) Influence of adjacent mounting

0.5 Frequency,GHz

13.-(1) Influence of adjacent mounting

Rate of change, % Rate of change, %

Insertion loss, dB

Isolation, dB

2.8

5 .197 Inter-relay distance

, mm inch

14.-(1) Contact reliability (1 mA 5 V DC resistive load)

Pick-up voltage

ON

0 ON

–10

ON

10

Drop-out voltage

OFF

0 OFF

–10 OFF

0

5 .197 Inter-relay distance

10

Pick-up voltage

F(t), % 99.9 99.0 95.0

ON

0

ON

–10

ON

70.0 50.0 30.0 ON

10

10.0 5.0

Drop-out voltage OFF

0

2.0 1.0 0.5

OFF OFF

–10

, mm inch

5 .197 Inter-relay distance

15. Actual load test (35 mA 48 V DC wire spring relay load)

Tested sample: TQ2-12V Condition: Detection level 100 Ω

Circuit

100

Change of pick-up and drop-out voltage

F(t), % 99.9 99.0 95.0

100

20Hz

70.0 50.0 30.0 500Ω 10.0 5.0

0.2 0.1 1.0

10 No. of operations, ×106

, mm inch

14.-(2) Contact reliability (100 µA 5 V DC resistive load)

2.0 1.0 0.5

m=2.15 µ=2.7×107 95% reliability limit = 7.6×106 (Weibull probability paper)

0.2 0.1 1.0

OFF

0

m=1.4 µ=16.4×107 95% reliability limit = 19.5×106 (Weibull probability paper) 10 No. of operations, ×107

100

48 V DC

500Ω

Ratio against the rated voltage, %V

10

Rate of change, % Rate of change, %

Rate of change, % Rate of change, %

Tested sample: TQ2-12V Condition: Detection level 10 W

90 80 Pick-up voltage

70

Max. Min.

60 50 40 30

Drop-out voltage Max. Min.

20 10 0

Wire spring relay Circuit diagram

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

10

20 30 40 No. of operations, ×104

50

TQ 16. 0.1 A 53 V DC resistive load test Change of pick-up and drop-out voltage

Change of contact resistance 100

70 60 50 40

Max.

30

Min.

20 10 0

10

20 30 40 No. of operations, ×104

100

90 80

Pick-up voltage Max. Min.

70 60 50 40 30

Drop-out voltage

20

Max. Min.

10 0

50

Contact resistance, mΩ

80

Ratio against the rated voltage, %V

100

90 Contact resistance, mΩ

Change of contact resistance

500

1,000

1,500

2,000

No. of operations, ×104

17.-(1) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs.

Terminal Nos. 2-3-4: ON

Terminal Nos. 2-3-4: OFF

− x:105.6 µs 3σn-1: 163.8 µs Min.: 23 µs Max.:243 µs

60 50

50 41

40

40

30 20

− x:71.6 µs 3σn-1: 127.1 µs Min.: 17 µs Max.:187 µs

60

30

26 19

19

27

20

17

10

10

10

7

4 100 150 200 250 300 µs min. ~

~

~

100 150 200 250 300 350 µs max.

~

50

50

~

10

~

0

~

~

~

~

100 150 200 250 300 350 µs max.

~

50

~

50

~

100 150 200 250 300 µs min.

10 ~

0

17.-(2) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs.

Terminal Nos. 7-8-9: ON

Terminal Nos. 7-8-9: OFF

− x:115.6 µs 3σn-1: 167.3 µs Min.:35 µs Max.:254 µs

60 50

50

40

40

35 31

30

30

21

20

15

12

11 10

4

2

1

2

100 150 200 250 300 µs min.

100 150 200 250 300 350 µs max.

~

50

50

~

10

~

~

~

~

~

~

100 150 200 250 300 350 µs max.

~

50

50

0

~

100 150 200 250 300 µs min.

10 ~

0

~

6

~

10

~

30 20

− x:80.7 µs 3σn-1: 156.7 µs Min.: 29 µs Max.:298 µs

60

For Cautions for Use, see Relay Technical Information

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

90 80 70 60

Max.

50 40 30

Min.

20 10 0

500

1,000 1,500 2,000 No. of operations, ×104