Panasonic TXD Relays by SYNsCON

TX-D TESTING

HIGH INSULATION RELAYS (Conforming to the supplementary insulation class of EN Standards (EN41003))

TX-D RELAYS

FEATURES 15 .591

8.2 .323 15 .591

• 2,000 V breakdown voltage between contact and coil. • Outstanding surge resistance. Surge withstand between open contacts: 1,500 V 10×160 µsec. (FCC part 68) Surge withstand between contact and coil: 2,500 V 2×10 µsec. (Telcordia) • High contact capacity: 2 A 30 V DC (Standard type) • M.B.B. type available • The use of gold-clad twin crossbar contacts ensures high contact reliability.

• Approved to the supplementary insulation class in the EN standards (EN41003). The insulation distance between the contact and coil meet the supplementary insulation class of the EN41003 standards as required for equipment connected to the telephone lines in Europe. Satisfies the following conditions: • Clearances: 2.0 mm .079 inch or more • Creepage distance: 2.5 mm .098 inch or more

7.4 .291

7.4 .291 8.4 .333

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Min. switching capacity ❇1 Rating

Nominal operating power

Single side stable

1 coil latching

Mechanical (at 180 cpm) Expected life (min. operations) Electrical (at 20 cpm)

Standard (B.B.M) type 2 Form C

M.B.B.type 2 Form D

100 mΩ Gold-clad silver 2 A 30 V DC 60 W

1 A 30 V DC 30 W

220 V DC 110 V DC 2A 1A 10 µA 10 mV DC 200 mW 250 mW (1.5 to 12 V DC) (1.5 to 12 V DC) 230 mW 270 mW (24 V DC) (24 V DC) 150 mW (1.5 to 12 V DC) — 170 mW (24 V DC) 107 108 105 (2 A 30 V DC resistive), 105 (1 A 30 V DC resistive) 5 ×105 (1 A 30 V DC resistive)

Notes: ❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC]) ❇2 The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40°C to +158°F.

Initial insulation resistance*1 Between open contacts Initial breakBetween contact down and coil voltage*2 Between contact sets Between contacts, Initial 10 ×160 µs surge Between contact voltage and coil, 2×10 µs Temperature rise (at 20°C) Operate time [Set time]*5 (at 20°C)

Release time [Reset time]*6 (at 20°C) M.B.B. time*12 Shock resistance Vibration resistance

Functional Destructive*9 Functional*10 Destructive

Conditions for operation, transport and storage*11 (Not freezing and condensing at low temperature) Unit weight

Standard (B.B.M) type M.B.B.type Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min.

500 Vrms for 1 min.

2,000 Vrms for 1 min. 1,000 Vrms for 1 min. 1,500 V [FCC Part 68]

–

2,500 V [Telcordia] Max. 50°C*4 Max. 50°C*3 Max. 4 ms (Approx. 2 ms) Max. 4 ms [Max. 4 ms (Approx. 2 ms) (Approx. 2 ms)] Max. 4 ms (Approx. 1 ms) Max. 4 ms [Max. 4 ms (Approx. 1 ms) (Approx. 2 ms)] — Min. 10 µs Min. 750 m/s2 {75 G}*7 Min. 500 m/s2 {50 G}*8 Min. 1,000 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm

Ambient temp. ❇2

–40°C to +85°C –40°F to +185°F

Humidity

5 to 85%R.H. Approx. 2 g .071 oz.

Remarks * *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 *11

Specifications will vary with foreign standards certification ratings. Measurement at same location as “Initial breakdown voltage” section. Detection current: 10 mA By resistive method; nominal voltage applied to the coil; contact carrying current: 2 A. By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A. Nominal voltage applied to the coil, excluding contact bounce time. Nominal voltage applied to the coil, excluding contact bounce time without diode. Half-wave pulse of sine wave: 6 ms.; detection time: 10 µs. Half-wave pulse of sine wave: 11 ms.; detection time: 10 µs. Half-wave pulse of sine wave: 6 ms. Detection time: 10 µs. Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

*12 M.B.B. time:

Min. 10 µs × Measuring condition

500 Ω 5 V DC

TX-D TYPICAL APPLICATIONS • Home appliances, and audio/visual equipment • Automotive equipment • Medical equipment

• Communications (XDSL, Transmission) • Measurement • Security

ORDERING INFORMATION 1) Standard (B.B.M.)type Ex. TXD

Contact arrangement

Surface-mount availability

2: 2 Form C

–

Operating function

Nil: Standard PC board terminal or Nil: Single side self-clinching terminal stable SA: Standard surface-mount terminal L: 1 coil latching SL: High connection reliability surface-mount terminal type SS: Space saving surface-mount terminal type

2) M.B.B.type

Ex. TXD

Contact arrangement 2: 2 Form D

Surface-mount availability

–

Terminal shape Nil: Standard PC board terminal or surfacemount type H: Self-clinching terminal

Operating function

–

Terminal shape

Nil: Standard PC board terminal or 2M: 2 M.B.B. type Nil: Standard PC self-clinching terminal board terminal SA: Standard surface-mount terminal or surfaceSL: High connection reliability surface-mount mount type terminal type H: Self- clinching SS: Space saving surface-mount terminal type terminal

4.5V

–

Coil voltage (DC)

Packing style

1.5, 3, 4.5, 5, 6, 9, 12, 24 V

4.5V

–

Coil voltage (DC) 1.5, 3, 4.5, 5, 6, 9, 12, 24 V

Nil: Tube packing Z: Tape and reel packing (Picked from the 8/9/ 10/12-pin side)

Packing style Nil: Tube packing Z: Tape and reel packing (Picked from the 8/9/ 10/12-pin side)

Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number. suffix “-X” is needed when ordering. (ex.) TXD2SA-3V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.

TYPES AND COIL DATA (at 20°C 68°F) 1. Standard (B.B.M.) type (1) Standard PC board terminal and self-clinching terminal 1. Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. V DC Standard PC board terminal TXD2-1.5V TXD2-3V TXD2-4.5V TXD2-5V TXD2-6V TXD2-9V TXD2-12V TXD2-24V

Self-clinching terminal TXD2-H-1.5V TXD2-H-3V TXD2-H-4.5V TXD2-H-5V TXD2-H-6V TXD2-H-9V TXD2-H-12V TXD2-H-24V

Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 132.7 66.7 44.4 40.0 33.3 22.2 16.7 9.6

Reset voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Nominal operating current, mA (±10%) 100.0 50.0 33.3 30.0 25.0 16.7 12.5 7.1

Coil resistance, Ω (±10%) 11 45 101 125 180 405 720 2,504

Nominal operating power, mW 200 200 200 200 200 200 200 230

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Nominal operating power, mW 150 150 150 150 150 150 150 170

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

2. 1 coil latching Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Standard PC board terminal TXD2-L-1.5V TXD2-L-3V TXD2-L-4.5V TXD2-L-5V TXD2-L-6V TXD2-L-9V TXD2-L-12V TXD2-L-24V

Self-clinching terminal TXD2-L-H-1.5V TXD2-L-H-3V TXD2-L-H-4.5V TXD2-L-H-5V TXD2-L-H-6V TXD2-L-H-9V TXD2-L-H-12V TXD2-L-H-24V

Set voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Coil resistance, Ω (±10%) 15 60 135 166 240 540 960 3,388

Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

TX-D (2) Surface-mount terminal 1. Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Tape and reel packing

Tube packing TXD2S❍-1.5V TXD2S❍-3V TXD2S❍-4.5V TXD2S❍-5V TXD2S❍-6V TXD2S❍-9V TXD2S❍-12V TXD2S❍-24V

TXD2S❍-1.5V-Z TXD2S❍-3V-Z TXD2S❍-4.5V-Z TXD2S❍-5V-Z TXD2S❍-6V-Z TXD2S❍-9V-Z TXD2S❍-12V-Z TXD2S❍-24V-Z

Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 132.7 66.7 44.4 40.0 33.3 22.2 16.7 9.6

Reset voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Nominal operating current, mA (±10%) 100.0 50.0 33.3 30.0 25.0 16.7 12.5 7.1

Coil resistance, Ω (±10%) 11 45 101 125 180 405 720 2,504

Nominal operating power, mW 200 200 200 200 200 200 200 230

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Nominal operating power, mW 150 150 150 150 150 150 150 170

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

2. 1 coil latching Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Tape and reel packing

Tube packing TXD2S❍-L-1.5V TXD2S❍-L-3V TXD2S❍-L-4.5V TXD2S❍-L-5V TXD2S❍-L-6V TXD2S❍-L-9V TXD2S❍-L-12V TXD2S❍-L-24V

TXD2S❍-L-1.5V-Z TXD2S❍-L-3V-Z TXD2S❍-L-4.5V-Z TXD2S❍-L-5V-Z TXD2S❍-L-6V-Z TXD2S❍-L-9V-Z TXD2S❍-L-12V-Z TXD2S❍-L-24V-Z

Set voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18

Coil resistance, Ω (±10%) 15 60 135 166 240 540 960 3,388

❍: For each surface-mounted terminal variation, input the following letter. SA type: A , SL type: L , SS type: S Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available. 2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

2. M.B.B. Type (1) Standard PC board terminal and self-clinching terminal Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Standard PC board terminal TXD2-2M-1.5V TXD2-2M-3V TXD2-2M-4.5V TXD2-2M-5V TXD2-2M-6V TXD2-2M-9V TXD2-2M-12V TXD2-2M-24V

Self-clinching terminal TXD2-2M-H-1.5V TXD2-2M-H-3V TXD2-2M-H-4.5V TXD2-2M-H-5V TXD2-2M-H-6V TXD2-2M-H-9V TXD2-2M-H-12V TXD2-2M-H-24V

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.13 2.25 3.38 3.75 4.5 6.75 9 18

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Set voltage, V DC (max.)

Reset voltage, V DC (min.)

1.13 2.25 3.38 3.75 4.5 6.75 9 18

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Nominal operating current, mA (±10%) 166.7 83.3 55.6 50.0 41.7 27.8 20.8 11.3

Coil resistance, Ω (±10%) 9 36 81 100 144 324 576 2,133

Nominal operating power, mW 250 250 250 250 250 250 250 270

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Nominal operating power, mW 250 250 250 250 250 250 250 270

Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8

Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.

(2) Surface-mount terminal Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24

Part No. Tube packing TXD2S❍-2M-1.5V TXD2S❍-2M-3V TXD2S❍-2M-4.5V TXD2S❍-2M-5V TXD2S❍-2M-6 TXD2S❍-2M-9 TXD2S❍-2M-12 TXD2S❍-2M-24

Tape and reel packing TXD2S❍-2M-1.5V-Z TXD2S❍-2M-3V-Z TXD2S❍-2M-4.5V-Z TXD2S❍-2M-5V-Z TXD2S❍-2M-6V-Z TXD2S❍-2M-9V-Z TXD2S❍-2M-12V-Z TXD2S❍-2M-24V-Z

Nominal operating current, mA (±10%) 166.7 83.3 55.6 50.0 41.7 27.8 20.8 11.3

Coil resistance, Ω (±10%) 9 36 81 100 144 324 576 2,133

TX-D DIMENSIONS

mm inch

1. Standard PC board terminal and self-clinching terminal Standard PC board terminal

15 .591

7.4 .291

PC board pattern (Copper side view)

2.54 .100

0.65 8.2 .026 .323

10.16 .400

5.08 .200

+ 5.08 .200

3.5 .138

0.5 .020 1.15 .045

Schematic (Bottom view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

5.08 .200

2.54 .100

0.25 .010

–

8-1.0 dia 8-.039 dia

15 .591

3 4 5

10 9 8

Direction indication*

Tolerance: ±0.1 ±.004

Self clinching terminal

– +

3 4 5

10 9 8

Direction indication*

*Orientation stride located on top of relay.

7.4 .291 0.65 8.2 .026 .323 3.5 .138

0.5 .020 1.15 .045

5.08 .200

2.54 .100

0.25 .010

General tolerance: ±0.3 ±.012

2. Surface-mount terminal SA type

Suggested mounting pad (Top view) 15 .591 8.2 .323

0.5 .020 5.08 .200

Max. 10.0 .390

0.5 .020 5.08 .200

15 .591

1 5.08 .039 .200

Max. 10.0 .390

10 9 8

–

+ 1

4 5

Direction indication

For glue-pad

2.54 .100

7.24 .285

1 5.08 .039 .200

2.54 .100

2.16 .085 5.08 0.25 .200 7.4±0.5 .010 .291±.020

0.65 2.54 .026 .100

10 9 8

3.16 .124

7.4 .291 8.2 .323

Direction indication

5.08 0.25 .200 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

15 .591

SS type

0.3 .012

7.4 .291 8.2 .323

–

1.6 .0.63 7.24 .285

5.08 .200 0.25 9.4±0.5 .010 .370±.020

0.65 2.54 .026 .100

2.54 .100

3.16 .124

8.4 .331

15 .591

SL type

1 5.08 .039 .200

7.4 .291

Schematic (Top view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)

General tolerance: ±0.3 ±.012

6.24 .246

Tolerance: ±0.1 ±.004

REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life

2.0 DC resistive load

1.0

0.5 0.4 0.3

No. of operations ×104

Switching current, A

3.0 100 50 30 20

30V DC resistive load

0.2

Ratio against the rated voltage, %V

Tested sample: TXD2-5V, 10 pcs. Operating frequency: 180 cpm 100 90 Pick-up voltage

Max.

70 60

Min.

50 Drop-out voltage

Max.

Min.

20 10

20 30

50 100 200 300 Contact voltage, V

1.0 2.0 Switching current, A

100 1000 No. of operations, ×104

10000

TX-D 4. Electrical life (2 A 30 V DC resistive load)

5-(1). Coil temperature rise

Tested sample: TXD2-5V, 6 pcs. Operating frequency: 20 cpm

Tested sample: TXD2-5V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F

Change of contact resistance 100

90 Pick-up voltage

Max.

Min.

60 50 Drop-out voltage

Max.

30 20

80 70 60

40 Min.

30 20

Min.

+25°C +77°F +70°C +158°F

60 50 40 2A 30

0A 0A

10 2

4 6 8 No. of operations, ×104

Tested sample: TXD2-24V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F

50 40

2A 2A

0A 0A

4 6 8 No. of operations, ×104

100

Tested sample: TXD2-5V, 10 pcs.

Tested sample: TXD2-5V, 10 pcs. 5

5 Operate time Release time 4

Max. Min.

100

110 120 Coil applied voltage, %V

Operate time Release time 4

Max. Min.

2 Max. Min.

10 0

110 120 Coil applied voltage, %V

6-(2). Operate/release time characteristics (without diode)

Operate and release time, ms

+25°C +77°F +70°C +158°F

6-(1). Operate/release time characteristics (with diode)

70 60

Operate and release time, ms

5-(2). Coil temperature rise

Temperature rise, °C

Max.

10 0

Temperature rise, °C

100 Contact resistance, mΩ

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage

100

110

120

Coil applied voltage, %V

90 100 110 120 Coil applied voltage, %V

8. Distribution of set and reset voltage

9. Ambient temperature characteristics

Tested sample: TXD2-5V, 50 pcs.

Tested sample: TXD2-L-12V, 30 pcs.

Tested sample: TXD2-5V, 5 pcs. Set voltage Reset voltage

35 Pick-up voltage 15 Drop-out voltage

Quantity

30 25 20

15 5

10 5 0

Variation ratio, %

;;;;;;;;;;;;; ;;;;;;;;; ;; ; ;; ;; ;; ;; ;

7. Distribution of pick-up and drop-out voltage

–40 –20

40 x 20

Drop-out voltage x Pick-up voltage 20 40 60 80 Ambient temperature, °C –20

–40

0 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

10. Distribution of contact resistance

11-(1). High-frequency characteristics

11-(2). High-frequency characteristics

Tested sample: TXD2-5V, 30 pcs. (30 × 4 contacts)

Isolation characteristics Tested sample: TXD2-12V, 2 pcs.

Insertion loss characteristics Tested sample: TXD2-12V, 2 pcs.

25 20 15

Insertion loss, dB

; ; ; ; ; ;;;;;;

Quantity

Terminal Nos. 3-4, 9-10

;;;; ;;;;;;

Terminal Nos. 4-5, 8-9

Isolation, dB

100

0.4

30 40 50 Contact resistance, mΩ

0.8 0.6

1.0

0.2 0

100 Frequency, MHz

1,000

100 Frequency, MHz

1,000

TX-D 12-(1). Malfunctional shock (single side stable)

12-(2). Malfunctional shock (latching)

Tested sample: TXD2-5V, 6 pcs

Tested sample: TXD2-L-12V, 6 pcs. Deenergized condition Energized condition

Z XX' Y 1000m/s 2

Z' Y Y'

Reset state

Z XX' Y 1000m/s 2

Set state

X 1000m/s 2

Z 1000m/s 2

X 1000m/s 2

Z 1000m/s 2

1000m/s 2 Z'

1000m/s 2 X'

1000m/s 2 Z'

1000m/s 2 X' 1000m/s 2 Y'

1000m/s 2 Y'

Tested sample: TXD2-12V, 6 pcs.

0 –5

OFF OFF

5 Drop-out voltage 0

OFF

–5 0

5 0 Pick-up voltage –5

ON OFF

5 0 Drop-out voltage

OFF

–5 OFF 0

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

Rate of change, %

ON Pick-up voltage

Rate of change, %

13-(3). Influence of adjacent mounting

Tested sample: TXD2-12V, 6 pcs. Rate of change, %

13-(2). Influence of adjacent mounting

Tested sample: TXD2-12V, 6 pcs. Rate of change, %

13-(1). Influence of adjacent mounting

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

Pick-up voltage ON

–5

ON ON

OFF Drop-out voltage

OFF

–5

OFF OFF

, mm inch

2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance

Change of pick-up and drop-out voltage

Change of contact resistance

, mm inch

Circuit 458 Ω

+ 0.08 µF 48 V DC

–

0.08 µF

4 TXD 3

458 Ω Wire spring relay

100

Pick-up voltage Max. Min.

70 60 50 Drop-out voltage

40 30

Max.

Min.

10 0

Contact resistance, mΩ

Tested sample: TXD2-5V, 6 pcs.

Ratio against the rated voltage, %V

14. Actual load test (35 mA 48 V DC wire spring relay load)

80 70 60 50 40

Max Min.

30 20 10

20 30 40 No. of operation, ×104

15-(1). Distribution of M.B.B. time Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 3-4-5: ON

Terminal No. 3-4-5: OFF

60 300.5 µs x: σn-1: 55.3 µs Min.: 165 µs Max.: 415 µs

50 40 30

298.8 µs x: σn-1: 51.8 µs Min.: 205 µs Max.: 432 µs

50 40 30

22 20

12 7

350

400

450 µs max.

250

300

350

400 µs min.

150

200

250

300

350

400

450 µs max.

300

200

250

150

200

100

150

1 0

400 µs min. ~

350 ~

300 ~

250 ~

200 ~

150 ~

100 ~

20 30 40 No. of operation, ×104

TX-D 15-(2). Distribution of M.B.B. time Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 8-9-10: ON

293.4 µs x: σn-1: 60.4 µs Min.: 155 µs Max.: 445 µs

30 18 10

4 1

200

250

300

350

400

450 µs max.

100

150

200

250

300

350

400 µs min.

150

200

250

300

350

400

450 µs max.

150

400 µs min. ~

350 ~

300 ~

250 ~

200 ~

150 ~

100 ~

281.4 µs x: σn-1: 50.8 µs Min.: 420 µs Max.: 421 µs

Terminal No. 8-9-10: OFF

NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.

2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type

(2) Dimensions of plastic reel mm inch ±0.6

21 dia. .827 ±.024 dia.

mm inch Orientation (indicates PIN No.1)stripe +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

2.0 ±0.5 .079 ±.020

1.75 .069

4.0 .157

0.4 .016

100 ±1 dia. 3.937 ±.039 dia.

C A

Stopper (gray)

Stopper (green)

11.5 .453

D 16.0 10.0 .394 .630

TX/TX-D/TX-S -SMD relays

15.5 .610

24.0 ±0.3 ±0.2 .945 ±.012 9.2±.008 .362

Tape coming out direction

(ii) SL type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

1.75 .069

4.0 .157

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630

10.0 .394 Tape coming out direction

24.0 ±0.3 .945 ±.012

10.8±0.2 .425±.008

(iii) SS type mm inch +0.1 0 dia. Relay polarity bar 1.5 +.004 .059 0 dia. 2.0 (Z type) .079

4.0 .157

2.2 dia. .087 dia. 1.75 .069

0.4 .016

11.5 .453 15.5 .610

TX/TX-D/TX-S -SMD relays

16.0 .630 Tape coming out direction

8.0 24.0 ±0.3 ±.012 .315 .945 10.8±0.2 .425±.008

For Cautions for Use, see Relay Technical Information

370 ±2 dia. 14.567 ±.079 dia. 13 ±0.5 dia. .512 ±.020 dia. 24.4+20 .961+.079 0

2.0±0.2 .079±.008