Bahco tööriistade kampaania 2016 Taivoster Auto-Industry

The best of

Pakkumine kehtib kuni 31. detsember 2016

2016

TOOL STORAGE

XL 6 DRAWER TROLLEY, 188 TOOLS 1ST DRAWER • • •

4TH DRAWER

Ratchet comb.spanner (8, 9, 10, 11, 12, 13, 14, 17, 19) Combination wrench (6, 7, 8 ,9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24) Hand hacksaw

• •

-29%

• • •

1470KXL6CBK-FF2

2029,80 995,00 €€ 2857,40

• • • • • •

• • • • •

2ND DRAWER •

•

•

Bits set 31 pcs (ph,pz,torx,hex,sl) Bit holder 1/4” impact 1/4” hex Tek scrwd flat through (5.5 x 100, 6.5 x 125, 8 x 150, 1x 100) Ergo screwdriver (8 x4x100, 1x 5.5x100) Ergo screwdriver iec (0.4x 2.5x75, 0.6 x 3.5x100) Ergo screwdriver (1.2 x 6.5x125) Ergo screwdriver (pz0 x 60, pz1x75, pz2 x100, pz3 x150) Black square 250 mm 9” torpedo aluminum level Scriber carg.tungsten 5 m tape 25 mm stainless

• • • • •

5TH DRAWER • • • • • •

3RD DRAWER • • • • • • • • • •

• •

Ergo slip joint plier Side cutter 2101g-160ip Ergo side cutter hd21hdg-180ip Snipe nose cutting 160 Snipe nose bent g 160 Adjustable wrench 9070 6“ Adjustable wrench 9031 8” Adjustable wrench 9072 10“ Ergo screwdiver (PH0 x 60, PH1x75, PH2 x100, PH3 x150) Ergo screwdriver TX (10 x75, 15x100, 20 x100, 25x125)

8” hand,with handle,cut• 18” hand,with handle,cut 1 • 8” 1/2” 8” 1/2” round,with handle,cut 1 round,with handle,c • 8” 8” round,with handle,cut 1 round,with handle,cut 1 • pack 8“ thin millsaw,1re,single 8“ thin millsaw,1re,single pa • 8” 3 8” 3 square,with handle,cut 1 square,with handle,cut • Nylon Nylon faced hammer h/met 45 mm faced hammer h/met Screw.dr set hex 1,5-10• Screw.dr set hex 1,5-10 • Centre punch Centre punch • Drift punch (2,4,6) Drift punch (2,4,6) • Cotter pin punch (2,3,4,5,6 Cotter pin punch (2,3,4,5,6,8) • Circlip plier Circlip plier • 2800-180, 2800-180, 2890-180, 2900-180, 2990-180 2890-180, 2900

• • • • •

5TH DRAWER

Ratchet 1/2”, slim head•72t Ratchet 1/2”, slim head 72t 1/2” extension bar 125 •mm, 1/2”250 extension mm bar 125 mm Socket 1/2”(8, 9, 10, 11,• 12, Socket 13, 14, 1/2”(8, 15, 16, 9, 10, 11, 12 17, 18, 19, 21, 22, 23, 24)17, 18, 19, 21, 22, 23, 24) Window clicker torque •wrench Window clicker torque wren • Universal joint Universal joint • Torx socket 1/2” (t20,t25,t3 Torx socket 1/2” (t20,t25,t30,t40) • Hex socket driver 1/2“ (5,6, Hex socket driver 1/2“ (5,6,7,8,10) Ratchet 1/4”, slim head•72t Ratchet 1/4”, slim head 72t • Wobble Wobble extension 1/4”-50 mm,150 extension mm 1/4”-50 m • Smooth universal joint-1/4’’ Smooth universal joint-1/4’’ • Socket 1/4” (4,5,6,7,8,9,10,1 Socket 1/4” (4,5,6,7,8,9,10,11,12,13,14) Socket 1/4” (3,4,5,6,8) • Socket 1/4” (3,4,5,6,8) • Bit adaptor ¼” 50 mm retai Bit adaptor ¼” 50 mm retail

-37% 1470K7FFAUTO

2244 € € 1.100,00 3550,20

7 DRAWER TROLLEY, 109 TOOLS • • • • • • • • • •

2

Combination wrench 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32 mm Magnetic dish Hacksaw frames Side cutter 160 mm Snipe nose cutting 160 mm Carpenters knife Flexible pick up Combination plier 180 mm Minihacksaw frames Multi-purpose snip

• • • • • • • • •

Ring wrench 6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22, 21-23, 24-27, 25-28, 30-32 mm Hacksaw frame 319 Cotter pin punch 2, 3, 4, 5, 6, 8 mm Center punch 120 mm Flat chisel 175 mm 4040 m-10-11 flex head spanner 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22, 21-23 mm German din-hammer 400 gr Plastic hammer Telescopic mirror

WWW.TAIVOSTER.EE info@taivoster.ee

•

• • • •

59S/31-1 PZ1, PZ2 (x3),• PZ3; 59S/31-1 PH1, PZ1, PH2 PZ2 (x3), (x3), PH3;PZ3; PH1, PH2G (x2); T10, T15 (x3), PH2G T20 (x3), (x2); T25 T10, (x2), T15 T27, (x3), T20 (x3), T T30. SL: 3, 4.5, T30. SL: 3, 4.5, 5.5 mm; HEX: 3 mm, 4,• 5,5.5 6 mm. mm; 1/4 HEX: “ Magnetic 3 mm, 4, 5, 6 mm. 1/ bit holder. bit holder.

• 6700SM 6700SM SOCKET 1/4 4, 4.5, 5, 5.5, SOCKET 6, 7, 8, 8, 1/410, 4, 4.5, 5, 5.5 11, 12,13,14 mm 11, 12,13,14 mm • 6950 6950 ratchet 1/4, pear type 72tratchet 1/4, pear type 72t • 6954 t-handle 6954 t-handle

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

TOOL STORAGE

5 DRAWER TROLLEY, 145 TOOLS • • • • • • • • • • • • • • • • • •

-35%

-34%

1470K5BLACKFF2

1470K5FF2

918 €€ 450,00

918 €€ 450,00

1411,20

1387,90

• • • • • • •

Combination wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm Adjustable wrench 8” Snipe nose plier 160 mm Slip joint plier 250 mm Side cutter 160 mm Socket set 1/2” + ratchet 1/2” ERGO screwdriver (0.5x 3 x 60, 0.6 x 3.5x75, 8 x4x100, 1x 5.5x100, 1.2 x 6.5x125, 1.2 x 8 x125) ERGO screwdriver (PH1x75, PH2 x100) ERGO screwdriver (PZ1x75,PZ2 x100) ERGO screwdriver (TX10x 65, TX15x70, TX20 x 80, TX25x 80, TX30 x100) Socket set 1/4“ Ratcheting bit screwdriver Stubby ratcheting screwdriver Bit set 31pcs Power socket holder 1/4” Bit adaptor 1/4” Offset long series ball end hexagon key set Hacksaw frame 3 hand files 10T/”, 8” 3 m measuring tape Nylon tip mallet German DIN hammer Utility wire brush 9 mm snap off blade knife 109 mm snap off blades

5 DRAWER TROLLEY, 185 TOOLS • • • • • • • • • • • • •

-27% 1470K5BLACKFF3 1470K5BLACKFF3

• • • •

Combination wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm Adjustable wrench 8” Snipe nose plier 160 mm Slip joint plier 250 mm Side cutter 160 mm Socket set 1/2” + ratchet 1/2” ERGO screwdriver (0.5x 3 x 60, 0.6 x 3.5x75, 8 x4x100, 1x 5.5x100, 1.2 x 6.5x125, 1.2 x 8 x125) ERGO screwdriver (PH1x75, PH2 x100) ERGO screwdriver (PZ1x75,PZ2 x100) ERGO screwdriver (TX10x 65, TX15x70, TX20 x 80, TX25x 80, TX30 x100) Socket set 1/4“+ ratchet 1/4” Ratcheting bit screwdriver Stubby ratcheting screwdriver Bit set 31 pcs Power socket holder 1/4” Bit adaptor 1/4” Offset long series ball end hexagon key set

• • • • • • • • • • • • • • •

3/8” hex sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22mm 3/8” deep hex sockets: 10, 11, 12, 13, 14, 15, 17, 18, 19, 20, 22mm 3/8” ratchet quick release, 60 teeth/6° action angle 3/8” extension bars 75mm, 150mm 3/8” universal joint 3/8” x 1/4” bit holder 3/8” spark plug Sockets hex: 16 mm (5/8”), 21 mm (13/16”) 1/4” spinner with 2-component handle 1/4” x 1/4” bit holder 1/4” bits: slotted 4, 5.5, 7 mm 1/4” bits: PH 1, 2, 3 2 pcs 1/4” bits: PZ 1, 2 1/4” bits: Hex 2.5, 3, 4, 5, 6, 7, 8 mm 1/4” bits: Torx® T10, T15, T20, T25, T30, T40 1/2” deep sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21mm 1/4” deep sockets4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm

1071 € 525,00 1458,60

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

3

TOOL STORAGE

TOOL COMPOSITION FOR 5 DRAWERS, 196 TOOLS • • • • • • • • • • • • • • •

Double end box spanner 6-7, 8-9, 10-11, 12-13, 1415, 16-17, 18-19, 20-22, 21-23, 24-27, 30-32 mm Combination wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 mm Flex head wrench 10-11, 12-13, 14-15, 16-17,18-19, 21-23 mm Socket 1/2” 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,27, 30, 32 mm Socket deep 1/2” 13, 16, 17, 18, 19, 21, 22, 24,27, 30, 32 mm Socket driver 1/2”, hex 5, 6, 8, 10, 12, 14 Breaker bar 400 mm 1/2” Sliding t-handle 1/2” Extension bar 1/2”-75 mm, 125 mm Universal joint 1/2” Reversible ratchet 1/2” Socket 1/4” 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm Breaker bar 1/4” T-handle 1/4” Extension bar 1/4“-50 mm, 150 mm

• •

• • • • • • • • • • • • •

Universal joint 1/4“ Bit set pz1, pz2 (x3), pz3; ph1, ph2 (x3), ph3; ph2g(x2); t10, t15 (x3), t20 (x3), t25 (x2), t27, t30. sl: 3, 4.5, 5.5 mm; hex: 3 mm, 4, 5, 6 mm. 1/4 “ magnetic bit holder.

Pear type ratchet 1/4“ Centre punch 120 mm Cotter pin punch 2, 3, 4, 5, 6, 8 mm ERGO screwdriver 8x175, 6,5x150, 5,5x125, 4x100, 3,5x75 ERGO screwdriver PH1x100, PH2 x 125 ERGO screwdriver T10 x75, T-15x100, T-20 x100, T-25x125, T-27x125, T-30 x150,T-40 x150 Bit holder 1/4” Flat stubby 6,5x 25 Screwdriver PH2 x 25 Combination plier 180 mm Snipe nose cutting 200 mm Snipe nose bent 200 mm Circlip plier 2900-180, 2890-180, 2990-180, 2800-180

• • • • • • • • • • • • •

Slip joint plier 250 mm • Slip joint plier 250 mm • Univ,locking Univ,locking curved plier 250 mm curved plier 250 mm Side cutter 160 mm • Side cutter 160 mm • Ball pein hammer Ball pein hammer • Plastic hammer Plastic hammer Feeler gauge 0,05-1 20• blade Feeler gauge 0,05-1 20 blade • Universal two-arm puller Universal two-arm puller • Stainless Stainless steel carpenter knife steel carpenter knife • 3 m tape measure 16 mm 3 m tape measure 16 mm • Electrician’s Electrician’s scissors 127 mm scissors 127 mm • Adjustable Adjustable wrench 8070 6” wrench 8070 6” Black keys sets for hex•screws, Black keys longsets ball end for hex 1.5,screws, lon 2, 2.5, 3, 4, 5, 6, 8, 10 2, 2.5, 3, 4, 5, 6, 8, 10 Black keys sets for torx• screws, Black keys longsets ball for endtorx 9, screws, lon 10, 15, 20, 25, 27, 30, 40 10, 15, 20, 25, 27, 30, 40

-41% FF1ASET-AUTO1 FF1ASET-AUTO1

1621,80 795,00 €€ 2742,20

TOOL COMPOSITION FOR 4 DRAWERS, 168 TOOLS •

•

• • • • • • • • •

Double end box spanner 6-7, 8-9, 10-11, 12-13, 1415, 16-17, 18-19, 20-22, 21-23, 24-27, 30-32 mm Socket 1/2” 10, 12, 13, 14, 15, 16, 17, 18, 19, 20,21, 22, 23, 24, 27, 30, 32 mm T-handle 1/2” Extension 1/2” – 75 mm, 125 mm Universal joint 1/2” Ratchet 1/2”, slim head 72t Socket 1/4” 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,13 mm T-handle 1/4” Extension 1/4” 50 mm, 150 mm Universal joint Bits set: pz1, pz2 (x3), pz3; ph1, ph2 (x3), ph3; ph2g(x2); t10, t15 (x3), t20 (x3), t25 (x2), t27, t30. sl: 3, 4.5,5.5 mm; hex: 3 mm, 4, 5, 6 mm. 1/4 “ magnetic bit holder. ratchet 1/4”, slim head 72t

• • •

• •

• • • • • • • • •

Centre punch 120 mm Cotter pin punch 2, 3, 4, 5, 6, 8 mm ERGO screwdriver 8 x175, 6,5x 150, 5,5x125, 4x100, 3,5x75 ERGO screwdriver PH1x 100, PH2 x 125 ERGO screwdriver T10 x75, T-15x100, T-20 x100, T-25x125, T-27x125, T-30 x150, T-40 x150 Screwdriver ergo 1/4” bit holder Flat stubby 1,2 x 6,5x 25 Screwdriver PH2 x 25 Combination plier 180 mm Snipe nose cutting 200 mm Slip joint plier 250 mm Universal locking curved plier 250 mm Side cutter 160 mm Ball pein hammer

• • • •

•

• Plastic hammer Plastic hammer • 3 m tape measure 16 mm 3 m tape measure 16 mm • Electrician’s Electrician’s scissors 127 mm scissors 127 mm Black keys sets for hex•screws, Black keys longsets ball end for hex 1.5,screws, lon 2, 2.5, 3, 4, 5, 6, 8, 10 2, 2.5, 3, 4, 5, 6, 8, 10 Black keys sets for torx• screws, Black keys longsets ball for endtorx 9, screws, lon 10, 15, 20, 25, 27, 30, 40 10, 15, 20, 25, 27, 30, 40

-42% FF1ASET-AUTO2 FF1ASET-AUTO2

1122 €€ 550,00 1937,80

4

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

TOOL STORAGE

TOOL COMPOSITION FOR 3 DRAWERS, 140 TOOLS •

•

Combination wrench 6, 7, 8, 9, 10, 11, 12, 13, 14,

ph2g(x2); t10, t15 (x3), t20 (x3), t25 (x2), t27, t30.

•

Snipe nose cutting 200 mm

15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 mm

sl: 3, 4.5, 5.5 mm; hex: 3 mm, 4, 5, 6 mm. 1/4 “

•

Slip joint plier 250 mm

Socket 1/2” 10, 12, 13, 14, 15, 16, 17, 18, 19,

magnetic bit holder.

•

Universal locking curved plier 250 mm

20,21, 22, 23, 24, 27, 30, 32 mm

•

Ratchet 1/4”, slim head 72t

•

Side cutter 160 mm

•

T-handle 1/2”

•

Centre punch 120 mm

•

Ball pein hammer

•

Extension bar 1/2”-75 mm, 125 mm

•

Cotter pin punch 2, 3, 4, 5, 6, 8 mm

•

Plastic hammer

•

Universal joint 1/2”

•

ERGO screwdriver 8 x 175, 6,5x150, 5,5 x125,

•

3m tape measure 16 mm

•

Ratchet 1/2”, slim head 72t

4x100, 3,5x75

•

Electrician’s scissors 127 mm

•

Socket 1/4” 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,

•

ERGO screwdriver PH1x100, PH2 x125

•

Black keys sets for hex screws, long ball end 1.5,

13 mm

•

ERGO screwdriver T10 x 75, T-15 x100, T-20 x100, T-25x125, T-27x125, T-30 x150, T-40 x 150

•

T-handle 1/4”

•

Extension 1/4” 50 mm, 150 mm

•

Flat stubby 1,2 x 6,5 x 25

•

Universal joint 1/4”

•

Stubby PH2 x 25

•

Bit set pz1, pz2 (x3), pz3; ph1, ph2 (x3), ph3;

•

Combination plier 180 mm

2, 2.5, 3, 4, 5, 6, 8, 10 •

Black keys sets for torx screws, long ball end 9, 10, 15, 20, 25, 27, 30, 40

-49% FF1ASET-AUTO3 FF1ASET-AUTO3

714 €€ 350,00 1400,70

-23%

-23%

-23%

-23%

1470K5BLACK

1470K5BLUE 1470K5BLUE

1470K5RED

1470K5

411,10 225,00 €

411,10 225,00 €

411,10 225,00 €

391,30 225,00 €

532,00

532,00

532,00

506,40

5 DRAWER TROLLEY •

Large capacity heavy duty construction trolley

•

2 fixed and 2 swivel with brake

•

Double wall frame protects the slides and drawers from shocks/crashes

•

Drawers internal dimensions:

•

(1 x) 543 x 445 x 53 mm

•

(2 x) 543 x 445 x 118 mm

•

(2 x) 543 x 445 x 184 mm

• •

Click/detent closing system of drawers

•

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

5

TOOL STORAGE -25%

1475K8PSP

1009,80 495,00 €€ 1345,30

8 DRAWER TROLLEY •

• • •

• • • •

1470KC3 1470KC3

148,50 75,00 €€ 192,10

-23% 1495CD60W

689,90 375,00 € 892,80

Scratch resistant paint Big capacity heavy duty construction trolley Double wall frame protects the slides and drawers from shocks/crashes

• •

-23%

Lock & Go! latching system prevents drawers’ opening when moving the trolley

•

2 fixed and 2 swivel with brake Drawers internal dimensions: (6 x) 543 x 445 x 53 mm (1 x) 543 x 445 x 118 mm (1 x) 543 x 445 x 184 mm

3 TRAYS ROLL CART • •

Large capacity trays for storing both small and bulky objects Aluminum U shape structure

• • •

2 swiveling , 2 swiveling with brake Internal dimensions of the trays: 750 x 425 x 77 mm

2 DOORS CABINET ON WHEELS • • • • • • •

Compact heavy duty structure assembly on a reinforced roll cart 4 swivelling wheels (2 with brakes) make its transport easy Additional handle outside the cabinet 180º doors opening for full access to the inside Built in practical full opening drawer 525 x 200 x 65 mm Panel with square 10 x 10 mm pattern in front and sides Round lock system with 2 keys included

-23%

-23%

1495WBAH15TD 1495WBAH15TD

1495K5WB15TD 1495K5WB15TD

633,50 €€ 350,00

995,5 € 550,00

819,80

WORKBENCH ADJUSTABLE HEIGHT • • • •

6

1500 x 750 x AH MDF top Feet can be adjusted for reaching the desire height Minimum height 850 mm, maximum height 1100 mm Load capacity: 1,5 T

1288,30

WORKBENCH 5 DRAWERS • • • •

WWW.TAIVOSTER.EE info@taivoster.ee

Heavy duty construction workbench 1.500 x 750 x 40 mm MDF working surface The drawer tower can be assembly in any of the sides Load capacity: 1,5 T

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

AUTO

-39%

-45%

BLE300

BLE301

91,80€€ 45,00

71,40€€ 35,00 130.,40

150,50

LOW PROFILE CREEPER

CUSHIONED STOOL WITH STORAGE • •

Flexible seat height from 435 mm to 555 mm Seat load capacity: 136 kg

• • • • •

Adjustable header with three positions Capacity: 136 kg Low height: 120 mm Hanger at the back for easy storage in the garage Four PVC wheels, with 75 mm diameter, 25 mm width and steerable 360º

BOOSTERS -46%

-32%

BBA1224-1700 BBA1224-1700

BBA12-800 BBL12-800

601,80 295,00 €€

336,60 165,00 € 493,60

1117,90

•

• • •

To start diesel engines up to 480 HP without battery at 12 V and up to impressive 1.500 HP diesel engines without battery at 24 V Immediately powerful: at 12 V: 1700 CA, at 24 V: 900 CA Electronic fuse check system Cable length: 1,85 m

• • • •

•

• • • • •

BBC420 BBC420

397,80 195,00 € 587,30

-32%

BBC620 BBC620

561 €€ 275,00

Lithium battery: lasting three times longer Improved safety Less than half of the weight An 1 Ah electronic charger inside the housing. The charging status is indicated with green (the booster is fully charged), red (charging ongoing) and red (error)

To charge batteries and to crank vehicles with slightly discharged batteries.

For 12 V and 24 V vehicles Cranking Amps at 12 V 400 for BBC420, 570 for BBC620 Features overload and reverse polarity protections .

Charge it via 230 V power supply. Always charge it 100% before using it as a starter.

-33%

840,00

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

7

AUTO

BH6FC1000 BH6FC1000

438,60€€ 215,00

-40%

728,80

FOLDABLE CRANE 1T •

Foldable body and 4 fixed positions of the lifting arm: 1.000, 750, 500 and 250 kg

BH715 BH715

714 €€ 350,00

% -47

BH720 BH720

1326 € 650,00

15 T 15T

•

•

Robust welded frame with rounded shapes Large manometer for easy reading at eyes level Sliding piston

BH11500 BH11500

265,20 130,00 €€ 564,50

BH12000 BH12000

265,20 130,00 €€ 458,60

BH13000 BH13000

265,20 130,00 €

Increased safety due: “Dead man” safety mechanism

•

Overload valve

•

Swivel safety hook

20 T 20T

2032,70

1338,60

PRESS •

% -35

•

• • • •

Two V-blocks included Auto-centering pins for the table Double speed pump Robust and stable feet

-79%

%

-53 1.5T 1.5T

% -42

BH13000L BH13000L

BH

265,20 395,00 €

395

1253,80

22T T

3 T LONG CHASSIS HIGH ELEVATION TROLLEY JACK

%

-25 33T T

353,70

•

Designed for lifting four-wheel drive vehicles, vans, agricultural

•

tractors, mini-buses and camping cars

•

Entry height: 130 mm Max. Elevation: 800 mm

•

Long chassis 1270 mm allows long reach under the car

•

Dual pistons decrease the number of necessary strokes by 50%

EXTRA LOW JACKS • • •

Rubber saddle included protecting all surface and prevents slipping Safety pressure valve preventing overloading Safety lowering valve ensures safe lowering even at maximum load

SCISSOR JACK 4T- 5T

3T TROLLEY JACK •

Nylon wheels

•

Rubber saddle

•

Safety pressure and lowering valve

BH1EU3000

153 € 75,00

•

For agricultural and industrial vehicules

•

2 positions

•

4T over the scissor with minimum (65 mm) and maximum (406 mm) height

•

5T over the cilinder with minimum (350 mm) and maximum (710 mm) height

-47%

287,00

8

BH1S45 BH1S45

438,60 €€ 215,00

-38%

709,10

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

AUTO

BH33000 BH33000

1,5 T ALUMINUM JACK •

High Capacity

•

Low entry level height

•

Aluminium wheels

•

Low weight

•

Quick approach system

•

Handy

39,80€€ 19,50 65,20

BH36000 BH36000

71,40€€ 35,00

%

-39 3T 3T each each

%

-43 6T 6T each each

125,50

BH1A1500 BH1A1500

-39%

234,60 115,00 €

JACK STAND PAIR •

386,00

• •

Closure with security system Extra long feet for more stability Sold in set of 2

5T LONG FRAME JACK

5 0 0 kg TRANSMISSION JACK

•

Minimum height: 150 mm

•

Minimum height: 1175 mm

•

Maximum height: 570 mm

•

Maximum height: 2040 mm

BH15000A

BH5SP500QA BH5SP500QA

561 €€ 275,00

260,10 €€ 127,50

892,60

424,80

-37%

-39%

BH8AC3-1500 BH8AC3-1500

1326 € 650,00

-40%

2074,50

BH8AC1-500 BH8AC1-500

-36%

121,40 59,50 €€ 200,70

1,5T WHEEL DOLLY •

•

For mounting and dismounting wheels from 1 up to 2,4 meters diameter in heavy vehicules Eight large ball bearing rollers 76mm diameter and 735 mm long allowing to lift wheel up to 1,10 meter width

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

ENGINE SUPPORT BAR • • •

To easily lift and move engines out of the engine bay Width adjustable up to 1700 mm ensures a wide area of usage Suitable for all cars including big SUV’s

9

AUTO

BPHRC815 BPHRC815

193,80 95,00 €€

88

401,40

%

GEARED ENGINE STAND 450 kg

-40

BPHRC1015 BPHRC1015

214,20 €€ 105,00

-31%

275,40 135,00 €

mm mm

326,80

3T

BH8AC2-450 BH8AC2-450

%

-41

10 10

•

mm mm

Designed for easy direct engine maintenance

359,40

•

Features a unique 63:1 gear ratio for optimal safety

AIR HOSE REEL

•

•

To store air hose and transport compressed air

•

145º swivel steel bracket

•

ON-OFF spring for latching system

•

100% PU hose for easy cleaning and longer duration of the reel

•

Speed control adaptor BPHRSC can be attached as an option

Swivel wheels with brakes

BOD8901 BOD8901

336,60 €€ 165,00

-31%

489,20

BOD8902 BOD8902 BUCPE

459 €€ 225,00

-32%

459 €€ 225,00

689,90

678,30

OIL DRAINER AND CHANGER 90 L

EXHAUST FUME EXTRACTOR

• •

•

•

•

pressure

• Suction Suction air pressure: 7-8 bars/100air pressure: 7

115 psi

Big wheels and comfortable handle to carry it in an easy way

•

• 6 mm 6 mm probe and 8 bars/115 PSIprobe air and 8 ba

pressure

Adjustable tube height to match many different vehicles

•

Suction speed: 1,5 to 2• liters Suction per speed: 1,5 to

minute with oil at 70°-80°C minute with with oil at 70°-8

Foldable, for easy storage, occupying very small space

•

Used to drain waste oil •from Used engines, to drain waste o

gear boxes and differentials gear boxes and differe

To extract the fumes from the vehicle and lead them outside

•

-33%

•

115 psi

Maxi draining pressure:• 1bar/14.5psi Maxi draining pressure

Pressure range: 5-8 BAR, recommended air supply: 190 L/min

•

Accessories available

29-B

16,20 7,95 € €

BE64350 BE64350

-37%

45,90€€ 22,50 74,00

25,80

WHEEL WRENCHES

10

-38%

CHAIN OIL FILTER WRENCH

•

Heavy duty four way rim

•

Provides maximum power, removing the most stuck filters

•

17, 19, 21 mm / 25, 27, 32 mm

•

PVC handle for a more comfortable grip

•

1/2” drive

•

Possibility to work in all directions

•

Size: 350mm

•

Diameter Range: 60 mm - 105 mm

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

AUTO

BBR320 BBR320

60,20€€ 29,50

•

To push and turn brake pistons

•

Works in both directions: left and right

•

3/8” square drive

%

-39

BP219 BP219

•

BP255

9,20€€ 4,50 14,40

32,60

%

•

Bowl capacity: 200 cc, Tº range: -5ºC60ºC Filters the air to avoid damages caused by dust Regulates desired pressure between 1 and 8.5 bar Automatically lubricates the air to ensure correct operation and longer lifetime of the air tools

207,00

20,30 9,95 €€ -36

%•

-33

137,70 67,50 €€

BPH1010 BPH1010

13,30 6,50 € € 21,70

•

94,10

BRAKE CALIPER WIND BACK AIR TOOL

BP218

1/2” FILTER REGULATOR LUBRICATOR UNIT

-36%

%

-38

10 MM AIR SPIRAL HOSE

AIR BLOW GUN •

Meets OSHA requirements

•

Brass inlet

BS10 BS10

1479 € 725,00

-36%

2320,70

BMMTRMS1 BMMTRMS1

112,20 55,00 €€

AIR SPRING COMPRESSOR

-44%

201,50

MULTIMETER •

•

Capacity: 670 kg at 6 bar

•

Jaws separation: 380 mm

•

Spare air output

•

BS10AC1 is an optional moving stand to be used with BS10

It’s the perfect solution, easy and safe to use when measuring voltage, amperage, frequency, resistance, capacitance, continuity, polarity and temperature.

•

USB connection to PC.

•

Inner battery level indicator.

•

Auto ranging mode i.e. no need to adjust manually any ranges.

•

AC and DC measurement up to 1,000 V.

•

Class 600 V-CATIV and 1,000 V-CATIII.

•

6,000 counts high LCD resolution display.

•

Temperature measurement from -55C° to + 1,000°C.

•

True RMS feature giving precise AC measurement.

BBR110

71,40 €€ 35,00

BS10MEC

887,40 €€ 435,00 1442,60

SPRING COMPRESSOR MACHINE MECHANICAL TYPE •

•

used with an impact wrench or ratchet for

10 LED lamp scale

compressing the springs •

DOT 5.1 •

Heavy duty structure including a safety system

•

brake fluid by the integrated •

Same principal but works with a screw that has a 1/2” impact socket on the top to be

BRAKE FLUID TESTER, HUMIDITY CHECK Measures the humidity of the

The mechanical version of the Bahco air spring compressor

-37%

112,90

•

-38%

CAN bus compatible

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

•

The spring adaptor option BS10AC2 can also be used

11

AUTO

HEADLIGHT TESTER DUAL LASER •

LASER THERMOMETER

•

Non-contact infrared thermometer with a laser pointer for checking temperatures of engine, coolant, AC, exhaust, machinery parts, electric boards, heaters etc.

Temperature range: -50ºC +550ºC Accuracy: ±1.5% or ±1.5 ºC Distance spot ratio: 12:1 Resolution: 0.1ºC Response time: 500 ms

•

Wave length: 8-14 µm

•

For regulating the lamps of all types of vehicules

•

Standard et XENON

•

Adjustable height

• • •

BLBT100 BLBT100

•

-39%

805,80 €€ 395,00 1310,90

-24% BLT550

56,10€€ 27,50 74,30

-38% BE5200

%

-39

BH8PR4000 BH8PR4000

224,40 €€ 110,00

153 € 75,00

4T 4T

247,40

%

370,10

-41

BH8PR10000

357 €€ 175,00

10T 10T

ENGINE OIL PRESSURE TESTER •

608,40

•

PORTABLE RAM SETS

Contents:

•

Portable hydraulic equipment for straightening of rams

•

Quick click assembling system for easier and faster operation

The sets include: -Hand pump -Hose -Cylinder ram -Spreader ram -Rubber head

Quick and accurate system, Covers 90% of the car makes

-Rubber faced flat base -90° V-base -Male thread adaptor -A wide selection of extension tubes

-Serrated saddle -Diameter of hose connector: 1/4”

-Pressure tester hose and gauge with BAR [0-10] and PSI [0-150] -90º adaptor -Engine oil pressure quick test clamp [BE530001] -SAE adaptors [black finished] 1/2“ x 20 UNF, 3/8“ x 20 UNF , 1/4“ x 18 NPT, 1/8“ x 27 NPT ,R 1/8” DIN -Metric adaptors [chrome finished] M10 x P1,0,M12 x P1,5, M14 x P1,5

-38% BE5400P BE5400P

112,20 55,00 €€

-38%

179,70

BE210

1009,80 495,00 €€

DIGITAL PETROL ENGINE COMPRESSOR TESTER

1618,20

VIDEOSCOPE

•

Inspect pipes, cylinder heads, ventilation systems and much more.

•

•

The narrow camera lens cable gives access to almost all hard to reach

•

areas

Contents:

•

Thanks to the digital zoom you can detect the smallest details

•

Easily transfer videos and pictures to a computer or display them on a TV

•

Mirror pictures directly in the device

•

High resolution 3.5” colour LCD screen , 4 powerful LEDs, 850 LUX (at 10

-Flexible hose (300 mm) with spring load quick connection and dual M14/ M18 adaptor -Straight and angle rubber sealed pressure pieces -Adaptors for different spark plug thread sizes -M1 x 1.0 m, M12 x 1.25 m, M14 x 1.25 m -An assortment of o-rings -One 9V 6LR61 battery

cm) with a stepless light regulation

12

Measure the pressure at the combustion chamber of the petrol engine Can display readings in BAR 0-21, PSI 0-30 and KPA 0-2068 Possibility to store six compression readings

•

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

POWER TOOLS

NEW COMPOSITE PNEUMATIC IMPACT WRENCHES, NOW MORE POWERFUL AND FASTER!!

BPC813 BPC813

IMPACT WRENCHES

147,90 72,50 €€ % --3349%

BPC816 BPC816

153 €€ 75,00

BPC817 BPC817

367,20 €€ 180,00

230,60

178,50 87,50 €€

3/4” IMPACT WRENCH

%

-36

BPC814 BPC814

153 € 75,00 230,60

279,20

1/2” IMPACT WRENCH

1/2” MINI IMPACT WRENCH

• • • • •

224,50

1/2’’ MICRO IMPACT WRENCH

% 39% --34

BP814A

443,00

1/2’’ ANGLE IMPACT WRENCH

-43%

BPM915

BP900L

306 €€ 150,00

601,80 €€ 295,00

460,60

1053,70

Twin hammer mechanism Rubber grip One-hand operation power regulator Fast forward/reverse valve Air exhaust in handle Rubber boot included

BP821

% --3339%

295,80€€ 145,00

-34%

1/2” MAGNESIUM IMPACT WRENCH •

% 39% --36

576,50

3/8” IMPACT WRENCH BPC815 BPC815

% --3349%

1” MAGNESIUM IMPACT WRENCH • • • • •

% 39% --39

Impact wrench 1” long anvil Twin hammer mechanism Power regulator Support handle included 6” anvil (BP900L)

BP926

132,60 65,00 €€

% --3395%

316,20 €€ 155,00 483,50

218,30

1/2” AIR RATCHET HIGH PRECISION DRILL 13 MM

• • • • •

Rubber grip Power regulator Swivel connection Swivelling air exhaust

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

• • •

Top mounted forward / reverse switch Internal ball bearing construction Supplied with integrated support handle and drill container

13

POWER TOOLS BP827

% --3392%

• • • • •

255 € 125,00

278,50

448,20

7” ANGLE POLISHER

Composite motor housing Two speed trigger External adjustable clutch design Forward: Adjustable torque Reverse: Full torque

• • • •

% --3598%

520,20 255,00 €

With With memory memory

1481,50

1/2” METALLIC ELECTRONIC TORQUE ANGLE WRENCH 17-340 NM • • • • • • • •

Accuracy ±2% CW, ±3% CCW Visual, audio and vibration signal Supplied with reversible QR ratchet head 40 teeth / 9º action Data and set value retention during battery exchange Up to 10 presets Units in Nm, Kg.cm., dNm, Lbf.ft., Lbf.in.

Counter Programmable recalibration warning TAWM12340 has all the features of TAW12340 plus memory

• • • •

Rubber grip Power regulator Safety trigger Spindle lock

% 39% --4312

TAM12340 TAM12340

% 39% --4332

TAWM12340 TAWM12340

846,60 € 415,00

1237,10

•

Rubber grip Power regulator Safety trigger Spindle lock

TORQUE WRENCHES

TAW12340 TAW12340

•

BP809 BP809

188,70 92,50 €€

1/4” AIR SCREWDRIVER

% 39% --43

295,80 145,00 €€ 502,90

1/2” ELECTRONIC TORQUE AND ANGLE MEASURING ADAPTOR 17-340 NM •

Accuracy ± 4% , angle •range Accuracy 0-999º ± 4% , angle range 0-999º

• •

•

Automatic shut off

•

•

Automatic shut off

•

•

•

•

Peak and track modes • Peak and track modes

•

•

TORQUE WRENCHES WITH SCALE •

capacity of 1500 readings and up to 50 presets!!

•

•

Accuracy ± 3%

•

32 teeth/11.25° action ISO 6789

•

DTC12340 DTC12340

% --343952%

571,20 €€ 280,00 1032,40

1/2” DIGITAL TORQUE CHECKER 34-340 Nm • • •

• • •

Torque accuracy: ± 1% CW and CCW Units of torque: Nm, ft.lb., in.lb.

Three “AA ” Alkaline cells for battery power included Track, peak and first peak modes of operation Traceability from 10% to 100% of full scale.

Exercise drive for warming up mechanical wrenches

7451-20

147,90 72,50 €€

218,50

222,40

3/8” 2-20 Nm 7451-100 7451-100

3/8” 10-60 Nm

158,10 77,50 €€

229,40

231,30

7851-200 7851-200

163,20 80,00 €€ 1/2” 20-200 Nm

% 39% --342

72,

3/8” 1

% 39% --32785

7851-100 7851-100

153 € 75,00 3/8” 10-100 Nm

WWW.TAIVOSTER.EE info@taivoster.ee

% 39% --332

% --33492%74

7451-60

137,70 67,50 €€

249,00

14

% --33792%

1/2” 10-100 Nm

77,

1/2” 10

% 39% --332785

7851-340 7851-340

183,60 90,00 €€ 276,00

1/2” 70-340 Nm WRENCH

90,

1/2” 70 WR

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

WRENCHES

ADJUST 9031/29

% --3394%

39,80 €€ 19,50

51 €€ 25,00 82,50

60,70

TWINPACK 9031, 9029, BLACK FINISH ADJUSTABLE WRENCH, BIG OPENING

TRIPLEPACK 8070, 8071, 8072 •

• •

•

•

• •

170, 218 mm High performance alloy steel, black fi nish, precision-hardened and anticorrosion treated Comfortable non slip thermoplastic grip handle Scale in mm for pre adjusting and accurate measurement Head combines slimness with strength Left going screw

ADJUST ADJUST 3-90 3-90

•

• •

•

% 39% --37

19,40 9,50 €€

96,90

21,40€€ 10,50

6”, 8”, 10”

with the lightweight, slip free handle Improved access in confined spaces with

•

the slim 15° angled jaws.

•

9570

20,30 9,95 €€ 30,50

•

Side nut operating system

•

High performance alloy steel, black finish, precision hardened and anticorrosion treated

•

Head angle 15º provides better accessibility

•

Comfortable non slip thermoplastic grip handle

•

Left reading, measurement scale in mm

218 mm mm

BLACK FINISH ADJUSTABLE WRENCH, BIG OPENING

Maximum comfort with minimum effort

BLACK FINISH ADJUSTABLE WRENCHES, HEAVY DUTY

% 39% --32

31,60

Ultimate strength through precision

due to the ergonomic design. Better grip •

170 170 mm mm

9031

hardening and high performance alloy steel •

% 39% --33

29,10

TRIPLEPACK 9070, 9071, 9072 •

6”, 8”, 10” Ultimate strength through precision hardening and high performance alloy steel Wide handle for comfort in use Improved access in confined spaces with the slim 15° angled jaws Accurate jaw movement

9029

61,20€€ 30,00

•

% 39% --38

ADJUST ADJUST33

9571

22,40 €€ 11,00 33,20

9572

28,50 €€ 13,95 43,10

9573

38,80 €€ 19,00

% 39% --33

•

• •

High performance alloy steel, black finish, precision-hardened and anti-corrosion treated Comfortable non slip thermoplastic grip handle Scale in mm for pre adjusting and accurate measurement Head combines slimness with strength Left going screw

6” 6”

% 39% --32

9873

51 €€ 25,00

8” 8”

% 39% --34 10 ” 10”

% --3398% 12 ” 12”

% 39% --41

86,80

PLUMBER’S SET 2 PIECES •

Adjustable wrench 9072P 10” slip joint plier 8224, 250 mm

•

Packed in environmentally friendly corrugated cardboard

62,60

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

15

WRENCHES 111M/SH5

5

pieces pieces

% --3297%

27,50€€ 13,50 37,50

•

8, 10, 13, 17, 19 mm

% --2379%

111M/SH8

88

pieces pieces

50 €€ 24,50 68,10

•

COMBINATION WRENCH SET, METRIC

-43%

8, 10, 12, 13, 14, 17, 19, 22 mm

% 39% --37

111M/SH12 111M/SH12

12 12

pieces pieces

60,20€€ 29,50

COMBINATION WRENCH SET, METRIC •

95,80

•

8, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19 mm

6, 8, 9, 10, 13, 14, 15, 17, 19, 22, 24, 27, 30, 32 mm

111M/14T

14 14

pieces pieces

86,70€€ 42,50

111

42,

151,10

-22% 6M/SH8 6M/SH8

-35%

46,80€€ 22,95

1320RM/SH8 1320RM/SH8

88

pieces pieces

60,40

122,40 60,00 €€

SET OF DOUBLE OPEN END WRENCHES, METRIC

189,20 DYNAMIC-DRIVETM

RATCHETING RING WRENCH SET •

•

6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19 mm

6

6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22 mm

% 39% --43

1RM/SH6 pieces pieces

88

pieces pieces

60,20€€ 29,50 106,40

•

8, 10, 12, 13, 14, 17 mm

DYNAMIC-DRIVETM

RATCHET COMBINATION SPANNER SET

16

% 39% --43

1RM/SH12 1RM/SH12

12

pieces pieces

153 € 75,00 268,30

•

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm

DYNAMIC-DRIVETM

RATCHET COMBINATION WRENCHES • •

8, 10, 11, 12, 13, 14, 17, 19 mm Flexible head

WWW.TAIVOSTER.EE info@taivoster.ee

-45% 88

pieces pieces

41RM/SH8

41R

101 € 49,50

49,

184,70

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

WRENCHES -28%

DOUBLE HEAD SOCKET WRENCH SET, METRIC

2M/8T 2M/8T

88

pieces pieces

76,50€€ 37,50 106,50

DYNAMIC-DRIVETM

% --3379%

27M/8T

71,40€€ 35,00

DOUBLE END DEEP OFFSET RING WRENCH SET, METRIC •

27M/12T

141,80 69,50 €€

8

pieces pieces

113,70

•

6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22 mm

% --3399% 12

pieces pieces

230,60

6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22 mm

•

6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22, 21-23, 24-26, 25-28, 30-32 mm

DYNAMIC-DRIVETM

DYNAMIC-DRIVETM

DYNAMIC-DRIVETM

DOUBLE HEAD SOCKET WRENCH SET 28M/8 28M/8

76,50€€ 37,50

% --3392%

113,30

16, 17, 18,• 8, 10, 11, 13, 16, 17, 18, 19 mm

28M/12 28M/12

107,10 52,50 €€

88

pieces pieces

% 39% --34

158,10 77,50 €€

12 12

pieces pieces

162,70 •

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

28M/15 28M/15

% 39% --36

91,80 €€ 45,00

15 15

pieces pieces

245,80 •

29M/10

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm

% 39% --34 10 10

pieces pieces

138,40

DOUBLE HEAD SOCKET WRENCH SET •

8, 10, 11, 12, 13, 14, 16, 17, 18, 19 mm

17

SCREWDRIVERS AND BITS % 39% --44

BE-9874 BE-9874

BE-9881 BE-9881

17,30 8,50 €€

25,50€€ 12,50

31,20

ERGO™ SCREWDRIVER SET, 4 PIECES •

Slotted: 0.5x 3 x125, 0.8 x4x100

•

Pozidriv: PZ1x75, PZ2 x100

•

Phillips:PH1x75, PH2 x100

BE-9882S BE-9882S

27,50 €€ 13,50

% --3497%

28,50€ € 13,95 53,60

51,70

INSULATED ERGO™ SCREWDRIVERS SET, 5 PIECES

INSULATED ERGO™ SCREWDRIVERS SET, 5 PIECES

Slotted: 0.5x 3 x 100, 0.8 x 4x 100,

•

1x 5.5 x 125 •

Slotted:1x 5.5x100, 1.2 x 6.5x125, 0.5x 3 x 60, 0.8 x4x100

% --3497%

BE-9881S

48,50

ERGO™ SCREWDRIVER SET, 6 PIECES

•

•

% 39% --47

Slotted: 0.5x 3 x100, 0.8 x4x100, 1x 5.5x125

Phillips: PH1x 80, PH2 x100

•

Pozidriv: PZ1x 80, PZ2 x100

% --3397%

BE-8572 BE-8572

39,80€€ 19,50

BE-9881i BE-9881i

% 39% --40

30,60€€ 15,00

63,40

50,70

ERGO™ SCREWDRIVER WITH INTERCHANGEABLE BLADES SET, 8 PIECES • •

18

for easy and safety lock)

ERGO™ STAINLESS STEEL SCREWDRIVER SET, 6 PIECES

•

Easy to choose the right tip, with the colour-coded handle

•

Hexagonal blades of 100 mm. Phosphate finish

•

Slotted: 0.5x 3 x 60, 0.8 x4x100, 1x5.5x125, 1.2 x 6.5x150

•

Presented in atractive pouch with 6 blades. Hung belt pouch

•

Phillips: PH1x75, PH2 x100

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

B219.007 B219.007

% 39% --42

B219.017 B219.017

34,70

BAHCOFIT SCREWDRIVER SET, 7 PIECES •

Pozidriv: PZ1x100, PZ2 x125

•

TORX®: T15x100, T20 x 100,

33,30

BAHCOFIT SCREWDRIVER SET, 7 PIECES •

Slotted: 1x 5.5x 125, 1.2 x 6.5 x 150, 1.6 x 8 x150, 0.6 x 3.5x100, 0.8 x4x100

T25x125, T30 x150

•

Phillips: PH1x100, PH2 x 125

% 39% --40

B219.026 B219.026

15,30 7,50 € €

% --3493%

15,80 7,75 € €

25,60

27,60

BAHCOFIT SCREWDRIVER SET, 5 PIECES •

% --3399%

20,30 9,95 € €

20,30 9,95 € €

B219.025 B219.025

AUTO& INDUSTRY

SCREWDRIVERS AND BITS

BAHCOFIT SCREWDRIVER SET, 6 PIECES

TORX : T10 x75, T15x100,

•

Slotted: 0.5 x 3 x75, 0.8 x4x100

T20 x 100, T25x125, T30 x150

•

Phillips: PH1x100, PH2 x125

•

Pozidriv: PZ1x100, PZ2 x125

Small finger marks on both sides of the neck for precision application

Black tip: provides precise tip

High performance alloy steel

Code laser marked on the blade

Soft, high-friction material with ridged surface for comfortable grip and maximum friction even when the hand is oily

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

Indelible symbol tip.

Easy to choose the right tip

Rounded end allows you to apply force without hurting the palm of your hand

2-component handle with more than 75% of rubber material

Vertical grooves for comfortable grip and maximum friction; anti-slip

Size laser marking

Can be hung

19

SCREWDRIVERS AND BITS % --3499%

B219.035 B219.035

B220.002

16,30€ € 8,00

7,70€€ 3,75

31,70

BAHCOFIT SCREWDRIVER SET, 5 PIECES •

% --3396%

11,90

BAHCOFIT 2 PIECES INSULATED TWINPACK

TORX® Tamper: TR10 x 75,

•

Slotted: 0.5 x 3 x100

•

Slotted: 0.5 x 3 x100

TR15x100, TR20 x100, TR25x 125,

•

Phillips: PH1x 80

•

Phillips: PH1x 80

TR30 x150

% 39% --37

B220.015 B220.015

19,40 9,50 € €

18,90 9,25 €€

30,90

30,00

BAHCOFIT INSULATED SET, 5 PIECES •

Slotted: 0.6 x 3.5x 100, 0.8 x4 x100,

BAHCOFIT INSULATED SET, 5 PIECES •

1.2 x 6.5x125 •

20

% --3397%

B220.005

• xSlotted: Slotted: 0.5 x 3 x100, 0.8 4 x100 x0.5 x 3 x100, 0

1x 5.5 x125

Pozidriv: PZ1x 80, PZ2 x 100

WWW.TAIVOSTER.EE info@taivoster.ee

•

1x 5.5 x125

• Phillips: PH1x 80, PH2 Phillips: PH1x 80, PH2 x100

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

BE-7675 BE-7675

% --3492%

BE-9575 BE-9575

44,20

OFFSET SCREWDRIVER SET TORX PLUS ® BLACK, 8 PIECES

33,30

OFFSET TORX ® KEY SET, BLACK, 8 PIECES •

All sizes marked on the holder for easy selection

•

% 39% --39

20,30€ € 9,95

25,50€€ 12,50

•

AUTO& INDUSTRY

SCREWDRIVERS AND BITS

All sizes marked on the holder for an easy selection

•

T9, T10, T15, T20, T25, T27, T30, T40

T9, T10, T15, T20, T25, T27, T30, T40

BE-9770i BE-9770i

% 39% --41

BE-9770 BE-9770

20,30 9,95 € €

14,20€ € 6,95

34,40

22,40

OFFSET LONG SERIES BALL END HEXAGON KEY SET, METRIC, INOX, 9 PIECES •

% --3397%

1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm

OFFSET LONG SERIES BALL END HEXAGON KEY SET, METRIC, BLACK FINISH, 9 PIECES •

All sizes branded onto the lid for an easy selection

•

59S/31-1 59S/31-1

1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm

% 39% --34

706-1

28,50€€ 13,95

13,80 6,75 € €

46,20

21,00

BIT SET, 31 PIECES •

release bit holder •

Drive: 1/4” DIN 3126-C6.3, ISO

PRECISION SCREWDRIVERS, SET 6 PIECES •

Material: High performance alloy

Slotted: 1.5x 50, 2 x 50, 2.5 x 50, 3 x 50

1173 •

% 39% --38

•

Phillips: PH0 x 50, PH1x75

steel, zinc phosphate

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

21

SCREWDRIVERS AND BITS % --3398%

7823

% 39% --38

808061

61,10€€ 29,95

44,80€€ 21,95

99,00

71,80

BIT ASSORTMENT PHILLIPS, SLOTTED, HEX AND TORX ® SCREWS, 23 PIECES

1000 V RATCHETING SCREWDRIVER WITH INTERCHANGEABLE BLADES SET, 6 PIECES

•

•

•

•

1 impact driver, 1/2” square drive

•

1 bit holding adapter for screwdriver bits, 5/16” hexagon and 1/2”

Smooth ratcheting stroke, three position ratchet mechanism: forward, reverse and neutral

3 slotted bits, 5/16” hexagon drive (size 8, 10, 12 mm) •

For work on live equipment, up to 1000 V

•

Safe way to release the blade by pushing the top end button

8 TORX bits, 5/16” hexagon drive (size T20, T25, T27, T30, T40, T45,

•

Interchangeable insulated blades of 100 mm

T50, T55

•

Presented in atractive pouch with 6 blades. Hung belt pouch

•

Retail packaging: transparent plastic tube (PVC) with hanging hole

• • •

48 teeth ratcheting screwdriver which permits smooth operation and minimum rotation arc to catch the next pawl tooth

•

square drive •

Handle: 2-component handle with soft, high friction-material with ridged surface for comfortable grip

Content:

®

903T-2 903T-2

% 39% --38

903T-1

% 39% --40

40,70€€ 19,95

38,70€€ 18,95

67,70

62,50

TORX® T-HANDLE SET, 6 PIECES •

TORX®: T10, T15, T20, T25, T30, T40

HEXAGONAL T-HANDLE SET, 6 PIECES •

3 x100, 4x150, 5x150, •6 x3 200, x100, 4x150, 5x 8 x 200, 10 x 200 mm

22

WWW.TAIVOSTER.EE info@taivoster.ee

8 x 200, 10 x 200 m

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

8223

ø 37 mm

27,50 €€ 13,50 39,50

8224

ø 45 mm

29,60 €€ 14,50 45,40

8225

ø 55 mm

35,70 €€ 17,50 63,50

8226

ø 67 mm

AUTO& INDUSTRY

PLIERS % --3390%

% --3395% % --3494%

% --3379%

2101G-125 2101G-125

16,30 8,00 € €

125 mm

22,00

2101G-140 2101G-140

16,80€ € 8,25

140 mm

23,30

2101G-160 2101G-160

17,30€ € 8,50

160 mm

23,80

2101G-180 2101G-180

% --3298% % --2379% % --3309%

17,60€ € 8,65

180 mm

44,90 €€ 22,00

% 39% --26

25,20

70,70

SLIP JOINT PLIERS

SIDE CUTTING PLIERS

•

Black finish, anti-corrosion treated, high performance alloy steel

•

Black finish, anti-corrosion treated, high performance alloy steel

•

Hardened jaws

•

The cutting radius progresses along the edge to cut hard material

•

Teeth designed to ensure grip

•

close to the joint and soft material at the tip

•

Jaws for flat and pipe shape gripping

•

Greater leverage and increased cutting capacity

•

Single thumb button adjustment

•

Round shaped jaws for improved accessibility in confined spaces

•

2628G-160 2628 G-160

160 mm

16,30 8,00 € € 21,50

2628G-180 2628 G-180

180 mm

2628G-200 2628 G-200

2430G-140 2430 G-140

21,40

% 39% --24

2430G-160 2430 G-160

160 mm

24340G-200 2430 G-200

% 39% --35

17,90€ € 8,75

200 mm

24,70

COMBINATION PLIERS

% --3299%

16,30€ € 8,00 22,90

% 39% --26

18,40 9,00 € €

% 39% --26

15,80€ € 7,75

140 mm

17,30 8,50 € € 22,90

200 mm

% --3294%

27,60

SNIPE NOSE PLIERS

•

Black finish, anti-corrosion treated, high performance alloy steel

•

Black finish, anti-corrosion treated , high performance alloy steel

•

Edges specially designed to cut harder material

•

Slim semicircular shaped and serrated jaws

•

Round shaped jaws give improved accessibility in confined spaces

•

Sharp edges for cutting softer material

•

Greater leverage and increased cutting capacity

•

Tips give a good grip and improved accessibility in confined spaces

•

Equipped with a return spring featuring an on/off function

•

Equipped with a return spring featuring an on/off function

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

23

PLIERS 2427G-160 2427 G-160

160 mm

18,40 9,00 € € 25,70

2427G-200 2427 G-200

200 mm

% --3299% % --3392%

31,60€€ 15,50 45,90

20,90€€ 10,25 30,90

9%

-3

POWER CUTTER •

SNIPE NOSE PLIERS, BENT TIP 45°

With centric precision cutting edges

•

•

Black finish, anti-corrosion treated, high performance alloy steel

•

Superior grip

•

Slim semicircular shaped and serrated jaws

•

Forged with cutting edges for piano, hard and soft wire

Sharp edges for cutting softer material

•

Exceptional cutting performance with minimum effort

•

Tips give a good grip and improved accessibility in confined spaces

•

Precision cutting edges additionally induction hardened 63-64 HRC

•

Equipped with a return spring featuring an on/off function

•

28-29/S4 28-29/S4

% --3299%

69,40 €€ 34,00

-%2973%

97,50

CIRCLIP PLIER SET • • •

Circlip pliers set in a cardboard box 2800-180: Internal straight tip, Ø19-60 mm 2890-180: Internal bent tip, Ø19-60 mm

• •

24

% --3391%

1520G 1520G

-%2963%

2800-180 2800-180

16,30 8,00 €€

17,30 8,50 €€

22,30

23,40

2900-180 2900-180

2990-180 2990-180

18,40 9,00 € €

18,40 9,00 € €

24,70

WWW.TAIVOSTER.EE info@taivoster.ee

2890-180 2890-180

% --2369% % --3295%

24,60

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

SOCKETS

-39%

-45%

S290

S460

67,30€€ 33,00

45,90€€ 22,50

121,40

75,70

DYNAMIC-DRIVETM

DYNAMIC-DRIVETM

1/4” SOCKET SET, 29 PIECES • •

1/4” SOCKET SET, 46 PIECES •

High performance alloy steel, matt finish Case: High Density Polythene (HDPE)

•

High performance alloy steel, matt finish Case: High Density Polythene (HDPE)

Contents:

Contents:

-12 pcs 1/4” hex sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm -1 pc 1/4” ratchet quick release, 60 teeth/6° action angle -3 pcs 1/4” socket drivers: PH 1, 2, 3 -5 pcs 1/4” socket drivers: Hex 3, 4, 5, 6, 8 mm -1 pc 1/4” extension bar 50 mm 2” -1 pc 1/4” extension bar 150 mm/6” -1 pc 1/4” sliding T-bar 100 mm/4” -1 pc 1/4” universal joint -1 pc 1/4” spinner with 2-components handle -2 pcs removable three section plastic box with lid

-12 pcs 1/4” hex sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm -1 pc 1/4” ratchet quick release, 60 teeth/ 6° action angle -4 pcs 1/4” socket drivers: PH 1, 2, 3, 4 -3 pcs 1/4” socket drivers: slotted 4, 5.5, 7 mm -6 pcs 1/4” socket drivers: Hex 3, 4, 5, 6, 8, 10 mm -7 pcs 1/4” socket drivers: T 8, 10, 15, 20, 25, 27, 30 -3 pcs 1/4” TORX® Sockets: E 6, 7, 8 -1 pc 1/4” spinner Disc -2 pcs 1/4” extension bars 2” & 4” -1 pc 1/4” sliding T-bar -1 pc 1/4” universal joint -1 pc 1/4” spinner with two component handle -1 pc 1/4” flexible extension bar 6” -3 pcs L-Keys: Hex 1.5, 2, 2.5 mm -3 pcs Removable three section plastic box with lid

-39% S1612L

45,90€€ 22,50

-42%

75,10

S240 S240

1/2” DEEP SOCKET SET, 12 PIECES • •

85,70€€ 42,00

High performance alloy steel ,matt finish Case: ABS

146,80

Contents: 12 pcs: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 mm DYNAMIC-DRIVETM

1/2” DEEP HEXAGON SOCKET SET, METRIC, 14 PIECES •

•

•

DD/S14

78,50€€ 38,50 127,50

•

• DYNAMIC-DRIVETM

1/2” deep impact sockets 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27 mm High performance alloy steel, black finish To be used with machines For maximum safety, use clamping springs Case with 2-component handle.

Removable plastic box

KÕIK HINNAD-38% SISALDAVAD KÄIBEMAKSU 20%

1/2” SOCKET SET, 24 PIECES • •

High performance alloy steel, matt finish Case: High Density Polythene (HDPE)

Contents: -18 pcs 1/2” hex sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32 mm -1 pc 1/2” ratchet quick release, 60 teeth/6° action angle -1 pc 1/2” universal joint -1 pc 1/2” T-adapter -1 pc 1/2” breaker bar with 2-components handle,10” -1 pc removable three section plastic box with lid

25

SOCKETS

-34% S81MIX

-28%

168,30 82,50 €€

S560 S560

96,90€€ 47,50

1/2” AND 1/4” SOCKET SET WITH OTHER TOOLS, 81 PIECES

133,70

DYNAMIC-DRIVETM

•

1/4” AND 1/2” SOCKETS SET, 56 PIECES • •

DYNAMIC-DRIVETM

253,60

High performance alloy steel, matt finish Case: High Density Polythene (HDPE)

•

High performance alloy• steel, High performance matt finish alloy st • Case:(HDPE) Case: High Density Polythene High Density Polyth

Contents:

Contents: -12 pcs 1/4” bi-hex sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm -10 pcs 1/4” bi-hex deep sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm -13 pcs 1/2” bi-hex sockets: 10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30, 32 mm - 3 pcs 5/16” bits TORX® T 45, 50, 55 - 2 pc 1/4” magnetic adaptor - 2 pcs 1/4” extension bars 50 mm/2” & 100 mm/4” - 1 pc 1/4” sliding T-bar 100 mm/4” - 1 pc 1/4” universal joint - 1 pc 1/4” spinner with 2-component handle - 1 pc 1/4” bit holder - 1 pc 1/4” bit adaptor - 2 pcs 1/2” extension bars 125 mm / 5” & 250 mm /10” - 1 pc 1/2” universal joint - 1 pc 1/2” spark plug socket hex 21 mm (13/16”) - 1 pc 1/2” T-adapter - 3 pcs L-Keys hex 1.5, 2, 2.5 mm - 1 pc 1/4” ratchet, 72 teeth/5° action angle, quick release, slim head - 1 pc 1/2” ratchet, 72 teeth/5° action angle, quick release, slim head

-10 pcs 1/4”hex sockets: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm -15 pcs 1/2”hex sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm -2 pcs 1/4” extension bars 50 mm / 2” & 150 mm / 6” -1 pc 1/4” sliding T-bar 100 mm / 4” -1 pc 1/4” universal joint -2 pcs 1/2” extension bars 125 mm/5” & 250 mm /10” -1 pc 1/2” universal joint -1 pc 1/4” ratchet, 60 teeth/6° action angle, quick release -1 pc 1/2” ratchet, 60 teeth/6° action angle, quick release -30 pcs 1/4” bits + 1 pc 1/4” bit holder in a practical removable case -12 pcs combination wrenches 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm

-35% S530T S530T

127,50 62,50 €€ -34%

195,70

S140T S140T

47,90€€ 23,50

PASS THROUGH PASS SOCKET THROUGH SET, 53 SOCKET PIECESSET, 53 P • •

73,20

High performance alloy• steel, High matt performance chrome plated alloy steel, matt chrome plated • Case:(HDPE) Case: High Density Polythene High Density Polythene (HDPE)

Contents:

PASS THROUGH SOCKET SET, 14 PIECES • •

High performance alloy steel, matt finish Case: High Density Polythene (HDPE)

Contents: - 12 pcs pass-through sockets: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24 mm - 1 pc pass-through ratchet with flexible head, 72 teeth/5° action - 1 pc pass-through extension bar, 75 mm

26

- 13 pcs pass-through sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm - 1 pc pass-through ratchet with flexible head, 72 teeth/5° action angle - 1 pc pass-through extension bar, 75 mm E20, E22 ® Tamper: TR-40, -

®

Tamper: TR-20, TR-25,

TR-27, TR-30 -

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

SOCKETS

-27%

-27%

K8901M/8

K8906M/8

132,60 65,00 €€

214,20 €€ 105,00

181,00

294,90

3/4” IMPACT SOCKET SET, METRIC • • • •

3/4” DEEP IMPACT SOCKET SET, METRIC

High performance alloy steel, black finish To be used with machines For maximum safety, use clamping springs In metal-sheet box

•

High performance alloy steel, black finish

•

To be used with machines

•

For maximum safety, use clamping springs

•

In metal-sheet box

-37%

-41%

BWSS12P3 BWSS12P3

27,50€€ 13,50

BWSS12P5 BWSS12P5

45,90€€ 22,50

DYNAMIC-DRIVETM

44,00

DYNAMIC-DRIVETM

77,80

3 WHEEL SOCKETS

5 WHEEL SOCKET SET

•

HEX sockets

•

HEX sockets

•

17, 19, 21 mm

•

17, 19, 21, 22, 24 mm

•

1/2” drive

•

1/2” drive

MEASURING

MTS-5-25 MTS-5-25

-40%

16,10 8,00 € €

1547

20,80

7,10€€ 3,50

MTS-8-25 MTS-8-25

19,80€€ 10,00

11,90

% --3293% 5m

% --2339% 8m

25,70

PROFESSIONAL FEELER GAUGES

MEASURING TAPE

•

Professional feeler gauge for adjusting governor gap

•

•

Includes 20 blades in sizes 0,05 mm to 1,00 mm

• • • • •

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

Available in metric only or metric/imperial (-E for M/I) Tapes are Class II Stainless steel blade with rust resistance coating Easy to read nylon coated blade with reverse blade printing Automatic blade lock Magnetic tip

27

LIGHTING

-36%

-34%

BLS68

62,20€€ 30,50

BLX128

97,20

127,50 62,50 €€

CORDLESS WORK LAMP

194,40

CORDLESS UNDER BONNET LAMP •

128 SMD LED lamp

•

1.8 m retractable holder

•

Shadow free

•

Battery charge indicator on charger

•

360º rotational hook

•

360º rotational hook

•

Shadow free

•

Shadow free

•

• on Battery charge indicator Battery charger charge indicator on charger

-23%

-37%

BLTFC1

BLTS10

47 €€ 26,00

36,70€€ 18,00

60,80

58,50

ALUMINIUM FLEX LAMP AND TORCH

SLIM AND LIGHT LAMP AND TORCH

•

Compact and light

•

• 10LED 10 SMD LED lamp, 1 SMD SMDtorch LED lamp, 1 SMD LED torch

•

1 COB LED lamp, 1 SMD LED torch, 180-220

•

• Extra Extra thin, ultra light, ideal in confined thin, ultra areas light, ideal in confined areas

lumens

•

• The The lamp can work at 50% oflamp the power can work and at then 50% lasts of the longer power and then lasts long

Flex and turn! 120º flex handle, 180º rotational head

•

Equipped with magnet •and Equipped cord with magnet and cord

•

Magnet on the base

•

• Regular and mini USB charger Regular and mini USB charger

•

360º rotational hook

•

• on Battery charge indicator Battery lampcharge indicator on lamp

•

Battery charge indicator on charger

•

-36% -23%

BLTS6I

96,90 €€ 47,50

BLTS7P

26,80€€ 15,00

152,10

34,70

INDUCTION CHARGING TORCH LAMP Powerful 6 SMD lamp, 1 SMD LED torch

•

Strong and durable, impact resistant

•

• 7 7 SMD LED lamp,1 SMD LED SMD torch LED lamp,1 SMD LED torch

•

Rotational hook

•

• light Extra compact and ultra Extra compact and ultra light

•

Induction charging base, equipped with holes to

•

Equipped with magnet •and Equipped clip with magnet and clip

hang it on a rack

•

Regular and micro USB• charger Regular and micro USB charger

Battery charge indicator on lamp

•

• Battery charge indicator Battery charge indicator

•

28

POCKET LAMP AND TORCH

•

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

AUTO& INDUSTRY

CUTTING TOOLS

-23%

302-35 302-35

20,30€€ 11,95

-45%

26,30

317

TUBE CUTTER

10,10€ € 4,95

•

Tube cutter for 8 to 35 mm pipes

•

For copper, bronze, aluminium, and steel tubes

•

Comfortable TPE covered knob with an extra spare wheel attached

•

Heavy knob allow fast adjustment

•

Spare wheel available, code 302-35-95

18,40

HACKSAW FRAME •

A comfortable hacksaw frame for all-round use, slim design improves access in confined spaces and makes storage easy

•

Special grip at the front provides good support for the guiding hand for superb performance

-36% •

1-476-04-3-2

Alternative 90° blade mounting for flush cutting ®

•

bi-metal blade 24 TPI for excellent cutting performance

32,60€€ 16,00 51,10

FILE SET OF SIX FILES •

Type of cut: 3 = Smooth

•

Square file, warding file, round file, three square file, half round file and flat file

•

All 100 mm long

3906-250-18-5P 3906-250-18-5P

5

pieces

% --3590%

6 €€ 2,95 11,90

HAND HACKSAW BLADES -23%

•

shatterproof Bi-Metal blade •

3834-SET-72 3834-SET-72

79,70€€ 45,00 103,20

HOLESAW SET •

The virtually unbreakable and

With a blade back of strong, flexible

•

L 250 T/” 18

3906-300-18-5P 3906-300-18-5P

5

pieces

11,90

•

L 300 T/” 14

alloyed super high speed steel Combines extreme cutting performance and wear resistance with a high degree of flexibility

3906-300-14-5P 3906-300-14-5P

5

pieces

6 €€ 2,95

L 300 T/” 18

3906-300-24-5P 3906-300-24-5P

Sandflex Bi-metal holesaw set consisting of popular sizes within the installation industry

% --3590%

11,90

•

®

engineering industry, water and sanitation industry and the electric

6 €€ 2,95

spring steel and a tooth line in high-

•

% --3590%

5

pieces

% 39% --50

6 €€ 2,95 11,90

Contents:

•

L 300 T/” 24

- 19, 22, 29, 35, 44, 51, 64 Ø - 38 mm depth - Arbors 14-30, 32-100

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

29

KNIVES -29%

-35%

KE18-01 KE18-01

KB18-01 KB18-01

5,10€€ 2,50

8,10€ € 3,95

7,80

11,40

ERGO 18 MM SNAP OFF KNIFE •

18 MM SNAP OFF KNIFE

Easy blade change

•

Comfortable TPR grip

•

-33%

-27%

KBRU-01 KBRU-01

KBSU-01 KBSU-01

10,10€ € 4,95

12,10€ € 5,95

15,20

16,60

RETRACTABLE UTILITY KNIFE

SPORTS UTILITY KNIFE •

Locking mechfor anism when blade is being used

•

Thumb rest comfort

• • • •

Comfortable TPR grip

-41% -26%

MTT151 MTT151

22,30€€ 10,95

2444

37,90

6,50€ € 3,20

MULTITOOL

8,80

KNIFE

•

Heavy duty aluminium body

•

Anodized finish in orange

•

Robust knife with a solid stainless steel blade for multipurpose use

•

18 versatile functions

•

2-component handle for comfort in use and a safe grip

•

Rust resistant stainless steel blades

•

Overall product length 220 mm, blade length 102 mm

•

Hard durable canvas storage pouch with belt loop

•

30

WWW.TAIVOSTER.EE info@taivoster.ee

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus, Tartu

-37

%

134,90

-32%

22,40

361-14 361-14

14”

STILLSON PIPE WRENCH

16,20 7,95 € € 24,80

%

•

Self clamping one-hand

361-18 361-18

18”

-40

91,80 €€ 45,00

14,20€ € 6,95

%

-36

400.003.030 400.003.030

361-12 361-12

12”

-35

AUTO& INDUSTRY

VARIOUS

•

22,30€€ 10,95

•

%

WAD PUNCH SET, 16 PIECES

•

361-24 361-24

24”

Body in traditional forged steel, anti-corrosion treated

34,80 •

33,70€€ 16,50

•

US Norm GGG-W-651, Type I

leather, cardboard, rubber, fibre, plastic and lead

Class B •

56,00

Nose diameters: 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16

•

UNE 16554

mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 28 mm and 30 mm

-51

%

-35

%

391,90

71,40€€ 95,00

TABLE VICE

109,50

BENCH VICES, ROUND GUIDE High grade cast steel

•

Heavy duty. Interchangeable jaws

•

Oversized anvil

•

Laminated spindle thread

•

Smooth operation

Material: High grade cast steel It can be easily fixed to a table

QUICK CLAMP

•

One piece forged hammer for extra resistance at work

•

Bimaterial handle grip directly injected on forged hammer increases safety

Has a force of 200 kg

•

•

at work

Replaceable gripping pads with 2 different compounds

•

Variable speed trigger mechanism that increases power as the head

•

450 gr

Round guide table vice

•

•

•

ERGO™ HAMMER

%

•

•

•

-27

193,80 35,00 €€

63 mm

601001250 834V-2

125 mm

834V-2 601001250

The long, curvy rubber grip provides for a variety of grip positions

529-16-L

24,40€€ 11,95 33,30

-27

% 570 gr

529-20-L 529-20-L

26,40€€ 12,95 36,00

KÕIK HINNAD SISALDAVAD KÄIBEMAKSU 20%

makes contact with the work piece

-29

% 300 mm

QCB-300

18,30 8,95 € € 25,60

-26

% 450 mm

QCB-450 QCB-450

20,30€ € 9,95 27,30

31

“Bahco: manufacturers of handtools since 1866” DISTRIBUTOR

TAIVOSTER BALTIC OÜ Turu 45b, 2. korrus 50704, Tartu tel: 53470805 ww w.bahco.com

www.taivoster.ee