2015 CATALOG
BASES BASE (SINGLE DRAWER)
DRAWER BASES 34-½” High x 24” Deep Width options: 12” 15” 18”
1
21” 24” 27” 30”
33” 36” 39” 42”
4 DRAWER BASE
34-½” High x 24” Deep Width options: 12” 15” 18”
4
Notes: - Specify right (R) or left (L) hinge on order for 12”, 15”,18”, 21” and 24” wide cabinets. -39” and 42" wide have a 2" center stile
BASE FULL HEIGHT
34-½” High x 24” Deep Width options: 6” 9” 18” 30” 42”
2
3 DRAWER BASE
34-½” High x 24” Deep Width options: 27”
5
Notes: - Specify right (R) or left (L) hinge on order for 12”, 15”,18”, 21” and 24” wide cabinets. -39” and 42" wide have a 2" center stile
BASE FULL HEIGHT 12" DEEP
34-½” High x 12” Deep Width options:
3 DRAWER POTS/PANS
30” 36”
3
34-½” High x 24” Deep Width options: 30” 36”
6 Notes: -(2) Bottom drawers have wood boxes and undermount soft close as standard for free.
DRAWER BASES
CORNER BASES
(Con’d)
2 DRAWER BASE
34-½” High x 24” Deep Width options:
BASE LAZY SUSAN
12”
7
36” x 36”
10
Notes: -Includes 28” white plastic lazy susan -Knuckle hinge door
Notes: -Can be used for oils and trays or modified into a file drawer (files sit sideways)..
BASE BLIND CORNER
SINK BASES BASE SINK
8
Notes: -24" has 2 doors
FARMHOUSE SINK BASE
9
34-½” High x 24” Deep Width options: 33” 39” Notes: -39" have 2" center stile -Has shelf at bottom of false front. -Fixed shelf. False front 10" tall.
34-½” High x 24” Deep Width options: 39” 42” 45”
34-½” High x 24” Deep Width options: 24” 30” 33” 36”
34-½” High x 24” Deep Width options:
11
Choose right (R) or left (L) hinge side on order form. A left cabinet has the blind side on the left and the door on the right (top picture). Notes: -No accessories are included, -Cabinets are 3" shorter than the nomenclature. -Pull your cabinet 3" away from wall to allow door to open (bottom picture). - 39 cabinet = 11 ⅞” wide door 42 cabinet = 14 ⅞wide door 45 cabinet = 17 ⅞” wide door -Wait until you receive cabinet to confirm clearance for accessories.
12” WALLS 12” WALL
15” WALLS 12” High x 12” Deep Width options: 12” 15” 18” 21” 24”
12
27” 30” 33” 36” 39” 42”
15” WALL
12” 15” 18” 21” 24”
15
Notes: -39" and 42” have 2" center stile. -Install hinge as R or L
12” WALL PREPARED FOR GLASS
12” High x 12” Deep Width options:
Notes: -Interiors finished to match doors -Available in shaker only -Glass not included -Image does not show shaker style -Install hinge as R or L
12” WALL LIFT UP
15” WALL PREPARED FOR GLASS
14
Notes: -Door opens up 90 degrees.
Design Tip:
coming soon...
15” High x 12” Deep Width options: 18” 30”
16
12” High x 12” Deep Width options: 24” 30” 36” 39” 42”
27” 30” 33” 36” 39” 42”
Notes: -39" and 42” have 2" center stile -Install hinge as R or L
18” 30”
13
15” High x 12” Deep Width options:
Notes: -Interiors finished to match doors -Available in shaker only -Glass not included -Image does not show shaker style -Install hinge as R or L
15” WALL LIFT UP
17
15” High x 12” Deep Width options: 24” 30” 36” 39” 42” Notes: -Door opens up 90 degrees
18” WALLS 18” WALL APPLIANCE GARAGE
21” WALLS 18” High x 12” Deep Width options:
21” WALL
24”
18
24” 30” 36” 42”
21 Notes: -Finished on both sides. - Height clearance when door is open is 15.5". Both sides come finished to match doors.
18” WALL MICROWAVE
Notes: -39" and wider have 2" center stile
18” High x 18” Deep Width options:
21” WALL REFRIGERATOR
24” 30”
19
21”High x 12” Deep Width options:
21” High x 24” Deep Width options: 36” 39”
22
18” WALL REFRIGERATOR
Notes: -Opening 28.5" wide by 15.75" tall -Order shelf for microwave ¾” x 28.25 x 18.
18” High x 24” Deep Width options: 36” 39”
20 Notes: -39" and wider have 2" center stile
Notes: -39" and wider have 2" center stile
30” WALLS 30” WALL
39” WALLS 30” High x 12” Deep Width options: 12” 15” 18” 21” 24” 27”
23
30” 33” 36” 39” 42”
39” WALL
12” 15” 18” 21” 24” 27”
26
Notes: -39" and wider have 2" center stile
30” WALL PREPARED FOR GLASS
39” WALL PREPARED FOR GLASS
18” 30”
Notes: -Interiors finished to match doors -Available in shaker only -Glass not included -Image does not show shaker style
Notes: -Interiors finished to match doors -Available in shaker only -Glass not included -Image does not show shaker style
25
30” High x 12” Deep Width options: 12” 24” 30”
39” High x 12” Deep Width options: 18” 30”
27
30” WALL OPEN
30” 33” 36” 39” 42”
Notes: -39" and wider have 2" center stile
30” High x 12” Deep Width options:
24
39” High x 12” Deep Width options:
39” WALL OPEN
28
39” High x 12” Deep Width options: 12” 24 ” 30” Notes: -Finished to match doors
Notes: -Finished to match doors
CORNER WALLS BLIND CORNER
TALLS
27 width x 12” depth Height options:
93” TALL PANTRY
15” 30” 39” Notes: -Choose right (R) or left (L) hinge side on order form. A left cabinet has the blind side on the left and the door on the right (top picture). -No accessories are included, -Cabinets are 3" shorter than the nomenclature. -Pull your cabinet 3" away from wall to allow door to open (bottom picture). - Door is 11.81” wide
29
HINGED CORNER
30
18” 30”
31 Notes: -Shaker style doors have center rail on lower door -(5) adjustable shelves, (1) fixed shelf -There are internal roll-outs available for both cabinets in the add-on’s section
27 width x 12” depth Height options: 30” 39”
93”High x 24” Deep Width options:
93” TALL OVEN
93”High x 24” Deep Width options: 33”
32
Notes: -Door has knuckle hinge -no accessories included
Notes: -Frame has 5” top/bottom rails and 3 1/2” sides.
93” TALL DOUBLE OVEN
93”High x 24” Deep Width options: 33”
33 Notes: -Frame has 5” top/bottom rails and 3 1/2” sides.
FINISHING PIECES 6” x 92” x ¾” 1.5” x 92” x ¾”
MOLDINGS
34
ADD-ON’S
Notes: -Use for crown, light rail, toe kick and fillers -Finished on 1 side & all edges -Grain runs long direction
WALL SIDE PANEL
35 BASE SIDE PANEL
36
40
15” x 42” x ¾” thick Notes: -SIDES OF CABINETS DO NOT MATCH DOORS. Order panels. -Finished on 1 side and all edges. Grain runs long direct.
41
27” x 30” x ¾” thick Notes: -Finished on 1 side and all edges. Grain runs long direct. -Use our molding to wrap around cab. side at toe-kick
EXTRA WALL SHELF
42”width x 12”deep
EXTRA BASE
42” width x 24”deep Notes: -Same finish and interior or cabinets. -Oversized. Cut on site.
SHELF
LOOSE ROLLOUT DRAWERS
42
TALL SIDE PANEL
37
27 x 92” x ¾” thick Notes: -Finished on 1 side and all edges. Grain runs long direct. -Can be split in tall direction to make extra tall wall panels when stacking,
TRASH PULLOUT
43
___” Width x __” Height CUSTOM SIZE PANEL Notes: -Finished on all surfaces.
38
DECORATIVE SHELF
39
-Max size 92”high x 43” wide. -Grain runs with long direction -Use if you want your panels flush with the face of doors. Square Feet = H” x W” / 144
44
48” width x 12” depth x ¾” thick Notes: -Finished on all sides -Shelf supports not provided
Notes: Install on site. Metal sides. ¾” furniture board bottom, front and back. 5 5/16” high.
For 18” wide cabinet Notes: Double bin. White plastic and metal. Does not come with door attachment Fits the 18" wide base cabinet
50' RUBBER STRIP FOR GLASS INSTALLATION
45
Notes: Metal strips to be installed between your oven and the cabinets to either side of it. .
ROUND TABS
46
For 18” wide cabinet or 30” wide cabinet
HEAT SHIELD FOR THERMOFOIL (SET)
Notes:-Same finish and interior or cabinets. -Oversized. Cut on site.
Notes: Cover up shelf holes or screw holes with stickers that match your cabinet interiors.
Leadtime, Delivery and Installation 1. Leadtime and Delivery:
2. Installation :
The leadtime is approximately 6weeks from the when you order. Cabinets are shipped to our partner warehouse in Hayward for pickup. They will contact you when the cabinets arrive to schedule a time for you to pick them up. Please ask Ecohome if you need a referral for a mover with a truck.
Mod cabinets are European frameless construction and may not be suitable for DIY installation. We strongly advise installation by an experienced professional. Installation support is not provided. Resources on how to install frameless cabinets can be found through YouTube and Google.
Cabinetry Specifications 1. Construction type:
6. Doors:
Our cabinets are called European or frameless style which provides 20% more storage than face frame cabinets at the other big box stores. All cabinet part connections use the wooden dowelandglue construction method. Doors add 7/8" thickness to depth of cabinet. Example: 24" deep base cabinet is 24 7/8" deep. Our cabinets have ¾” top and bottom mounting rails to safely attach your cabinets to the wall.
2" Shaker Doors are available in Cherry, Maple and Alder (domestic hardwoods). Center panel of shaker doors is MDF with veneer wood. Drawer are solid wood slab. Slab (flat) doors are available in Thermofoil (PVC) or painted MDF. Thermofoil runs vertically on doors and horizontally on drawers. The backs of thermofoil doors are melamine to coordinate with cabinet interior.
2. Materials:
7. Edge Banding:
Our cabinets are 3/4” high density engineered wood except the back which is 1/4” thick. They are available in White or Light Wood Grain melamine finish.
Our cabinets have durable PVC edgebanding. The open cabinets with finished interiors feature veneer edgebanding.
3. Top Coat:
8. Heat Shields:
Topcoats are one of the larges off gassers in your home. Our topcoat is zero VOC waterborne and Ultraviolet (UV) cured to be one of the best top coats on the market. UV waterborne coatings provide a much harder finish than solvent and oil based coatings. All top coats, stains and paints are water borne and GREENGUARD Certified to be safe.
Heat shields must be installed between cabinetry and heat producing appliances. A pair of Heat Shields are included packed in the Sink Base with each Thermofoil order. Failure to install heat shields where cabinet doors will be exposed to high temperatures voids their warranty.
4. Drawers / Roll outs:
9. Shelves:
Our drawers are soft closing! They are white epoxy coated metal sides with 3/4” melamine engineered wood bottoms and backs. They have a 50 lb capacity and softclose guides. Drawer box used for short drawers is 3 3/8” high. Tall drawer heads 11 7/8” & above as well as the rollouts are 5 7/8” high. Drawer box depth is 19 5/8” . All drawer fronts will be slab (flat) style on shaker orders except for the B12D2.
Shelves are 3/4” thick and match the cabinet interior. Shelves are edge banded with PVC on the face edge. Shelves rest on 5mm metal shelf pins. Shelves in open cabinets with finished interiors have edge banding finished to match. Shelf holes are bored in the cabinet at 32mm 1 1∕4” increments. Wall and tall cabinets have full depth adjustable shelves. Base and vanity cabinets have 14 7/16” deep adjustable shelves.
5. Hinges:
10. Toe Kick:
Our cabinets come standard with soft closing, 110 degree, fully concealed, 6way adjustable, clipdemountable hinges.
Base and tall cabinets include 3/4” sub toe kick dowelled into the cabinet end panels. Toe kick covers are required.
COLOR OPTIONS Thermofoil Slab (flat) door style w/ slab drawer front
Wood
Painted
Maple, Alder, or Cherry
Paint Grade Maple
Shaker door style w/ slab (flat) drawer front
Shaker & Slab door w/ slab (flat) drawer front
Thermofoil Options: Amati PC Amati PD Antique White Antique Gloss Antique Satin Birdseye Natural Gloss Black Claw Black Woodgrain Blanco White Gloss Brushed Aluminum Foil Cool Grey Suedette Driftwood 3 High Gloss Aluma Bronze Italian Zebrano Lausanne E Lausanne PB Matte Black Oak Melinga Grey
Pebble Grey Suedette Portuna 1 Portuna 2 Queenston Oak Samira B Shark Gray Smooth Aluminum Smooth White Stone Grey Suedette Swiss Elm Dark Venus Silver Gloss Wenge Gloss Wenge Matte White White Woodgrain Windsor Mahogany
Maple Stain Options: Amaretto Auburn Autumn Black Burgundy Cafe Caramel Cinnamon Clear Espresso Fruitwood Honey Mocha Natural Nutmeg Pecan Walnut Wild Hone y
Cherry & Alder Stain Options:
Amaretto Auburn Autumn Black Burgundy Cafe Caramel Cinnamon Clear Espresso Fruitwood Honey Mocha Mandarin Natural Nutmeg Pecan Raisin Walnut Wild Honey
Paint Options: Alabaster Antique Basil Black Butterscotch Bright White Cherries Jubilee Cinder Clover Country Pebble Fine Wine Forest Green Goldenrod Indigo Sage Shadow Slate Soft White Sunflower