KIM LIGHTING_microemitterledcomp_lit by TAKETEK

MICROEMITTERTM TECHNOLOGY

Ve r

sio n

2. 1

The Next Generation of Outdoor Lighting Advancements in LED Technology.

KIM LIGHTING 1Lenis eumsan esent lutat lam

The Next Generation of Outdoor Lighting

CONTENTS: Glare, no. Brilliant, yes. A Novel Approach to Light Distribution Task Efficacy Thermal Management Lumen Performance Upgradeability The Future is Today WARP9® LED Ordering Info, Specs and Photometry Structural LED Ordering Info, Specs and Photometry The Archetype® LED Ordering Info, Specs and Photometry Era® / Era® Bell/Era® Acorn LED Ordering Info, Specs and Photometry Curvilinear® LED Ordering Info, Specs and Photometry Wall Director® LED Ordering Info, Specs and Photometry PGL7 LED Ordering Info, Specs and Photometry Warranty / Additional LED Products

1 2 3 4 5 6 7 8-13 14-19 20-25 26-31 32-37 38-43 44-49 back cover

Kim Lighting is known throughout the world as the premier designer and manufacturer of quality, high performance, and architecturally relevant outdoor lighting solutions. Kim Lighting is a division of Hubbell Lighting, Inc.

WARP9 LED

Era Acorn LED

Structural LED

The Archetype LED

Curvilinear LED

Wall Director LED

Era LED

Era Bell LED

PGL7 LED

HID to LED Upgrade Kits

Glare, no. Brilliant, yes. LEDs, the key component in solid-state lighting systems, have increased greatly in performance over the past several years. More Lighting Designers, Engineers and Architects are seeking the performance and economic advantages of utilizing these light sources in their design. Unlike the single, centralized point sources employed in traditional lamps, LED diodes function as multiple points of omni-directional light. Rather than manipulating light distribution from flat diode arrays by means of refractors, Kim Lighting takes the approach of precisely aiming individual clusters of diodes installed onto a deck, creating a system of MicroEmitter™ technology. The benefit of this patent pending system includes superior glare control, uniformity of illumination, control of nadir dump (unnecessary light concentration beneath the luminaire), a unique approach to thermal management, and the ability to upgrade LED EmitterDecks over time. This is LED outdoor lighting perfection. This is Kim Lighting.

www.kimlighting.com | KIM LIGHTING 1

A Novel Approach to Light Distribution

Innovative InnovativeTechnology Optical Design

KIM LIGHTING MICROEMITTER MODULE

The patent pending MicroEmitter™ system developed by Kim Lighting opens up new possibilities in light distribution patterns unachievable with traditional reflector and refractor optical systems. The combination of several MicroEmitters within an optical system shapes, points, and tightly controls light toward the desired task. As a result, Kim Lighting’s MicroEmitter optical system has the ability to recreate any pattern of light to suit any application. IES classified distributions (Type I, II, III, IV and V) are achievable as are unique, custom optics specific to the project’s need.

TYPE 1

TYPE II

TYPE IV-NB AVAILABLE FOR WARP9 ONLY.

2 KIM LIGHTING | www.kimlighting.com

TYPE III 2

PATENT PENDING

TYPE IV

TYPE IV - NB1

ONE-WAY IS AVAILABLE AS ONE-WAY LEFT OR ONE-WAY RIGHT DISTRIBUTION.

TYPE V

ONE-WAY2

Task Efficacy

â&#x20AC;&#x153;Bright nadir dump deceives the human eyes such that the dim areas appear dimmer. When the human eye adjusts to uniform environments, subtle dim areas appear brighter.The public will feel safer in a more uniformally lit environment.â&#x20AC;? - Tom Lueken, Product Manager Kim Lighting

Precision Uniformity The MicroEmitter optic harnesses light toward the horizontal plane producing footcandle levels for a safe and evenly lit environment, while reducing nadir dump (unnecessary light concentration beneath the luminaire). Nadir dump results in poor max-to-min ratios and creates energy waste. By re-aiming the nadir energy, MicroEmitter optics produce a more precise placement of light for superior uniformity, improved target coverage, control glare and reduce electrical consumption.

EVEN, UNIFORM DISTRIBUTION

COMPARISON ANALYSIS CATALOG NO.

AR3/120L5K277

AR3/250PMH277

INPUT WATTS

140

291

AVG. FC

2.25

3.82

MAX. FC

3.75

6.30

MIN. FC

1.06

1.35

AVG. TO MIN.

2.12:1

2.83:1

MAX. TO MIN.

3.57:1

4.67:1

Criteria: Type III, mounting height is 20', street width is 35', and spacing is 100'. Luminaires are staggered on each side of the street. Comparison is based on two Archetype product models.

www.kimlighting.com | KIM LIGHTING 3

Thermal Management

Dual Heat Management with Exclusive LifeShield Protection System ®

MicroEmitter™ LED luminaires employ two distinct but complimentary methods to manage the life-limiting heat produced by the LED diode. Both conduction and convection are used to disperse heat, thereby maintaining diode performance and long life. Heat is drawn away from the housing chamber and dispersed into the free air around the luminaire. Additionally, each MicroEmitter module incorporates a solid aluminum heat sink, which is mechanically secured to the EmitterDeck™. The EmitterDeck is composed of a heavy gauge aluminum carrier plate and is affixed directly to the housing to dissipate heat to the outside environment. LIFESHIELD® PROTECTION SYSTEM

AUTOMATIC THERMAL SELF-MONITORING AND ADJUSTMENT Each EmitterDeck incorporates two temperature sensors located at the hottest locations of the back side of the deck. Each sensor sends temperature readings every 30 seconds to Kim Lighting’s exclusive LifeShield Protection System. In extreme conditions, LifeShield detects above tolerance temperature and automatically lowers the current to the MicroEmitters to preserve diode life. Lumen output is restored to full capacity once the temperature is stabilized to within acceptable limits. The LifeShield Protection System provides consistent performance with minimal output reduction in extreme and fluctuating environmental conditions. See page 5 for further details.

4 KIM LIGHTING | www.kimlighting.com

Lumen Performance MicroEmitter LED luminaire’s exclusive LifeShield® Protection System controls lumen depreciation in extreme and fluctuating environments to preserve operational lifespan. Always consult www.kimlighting.com for the most current performance data.

Luminaire Output at Outdoor Ambient Temperatures

Luminaire Lumen Loss by Hours of Operation 110

120

100

% of Rated Luminaire Lumens

Lumen Percentage

L-70

60 50 40 30

Hazardous Thermal Environment

110

90 80

100 Stabilizes Output Due to Exclusive LifeShield Protection System

Hours of Operation 70 10000

20000

30000

40000

50000

60000

70000

80000

90000

100000

Outdoor Temperature at 10°C/50°F. Temperature is based on continual average, annual assumptions.

-20°C -4°F

-10°C 14°F

0°C 32°F

10°C 50°F

20°C 68°F

25°C 77°F

30°C 35°C 86°F 122°F

40°C 95°F

45°C 104°F

50°C 55°C 60°C 122°F 132°F 140°F

65°C 149°F

70°C 158°F

Average Night Time / Outdoor Ambient Temperature

Outdoor Temperature at 40°C/104°F. Temperature is based on continual average, annual assumptions.

Notes: 1. Lumen loss stabilization is a result of Kim Lighting’s MicroEmitter luminaires exclusive LifeShield Protection System and Dual Heat Management System. 2. The LifeShield Protection System will lower the current to the LEDs significantly if the luminaire is exposed to direct heat (sun) or excessive abnormal conditions. 3. Luminaire Lumen Loss assumptions are based on LM-80 results and product testing based upon 5100K CCT, 350mA drive current, 25°C / 77°F lab ambient and cathode temperature at 85°C / 185°F. Assumptions past 6,000 hours are interpolated.

4. Cathode temperature baseline is at 85°C / 185°F. If cathode temperature increases during ambient changes and abnormal environment conditions, % of rated lumens will slightly decrease. 5. Outdoor ambient temperatures are assumed SITU averages by geographic region. 6. As Solid State Lighting technology and thermal managment systems continually advance, lumen loss projections are subject to improvement.

LM-79-2008 Compliance (INDICATES STANDARD IES FORMATTING)

Kim Lighting's photometric data for MicroEmitter LED luminaires are tested to the IESNA LM-79-2008 standard, and Kim Lighting only uses LEDs that are tested to the IESNA LM-80-2008 standard. When evaluating photometric data for LED luminaires, look for a negative one (-1) in the lumen output space of the photometric data file to assure compliance with LM-79-2008. All test reports published in this catalog reflect photometry performed under LM-79-2008 standards.

Actual Test Report

www.kimlighting.com | KIM LIGHTING 5

KIM LIGHTING HONORED WITH SSL PRODUCT INNOVATIONS AWARDS (PIA) Kim received a Gold Award in the area retrofit category for its upgrade kit that easily converts Kim Lighting HID luminaires to LED luminaires in the field.

Upgrade HID to LED

The Archetype HID to LED Upgrade Kit

HID

LED Savings Guide

Most existing Kim Lighting Area/Street installations can now be upgraded to cutting edge LED technology. HID to LED Upgrade Kits are available for a variety of Kim HID luminaires including WARP9®, Archetype®, Structural, Era®, Era® Bell, Era® Acorn, Curvilinear and Wall Director®. They install in minutes providing a value-added upgrade solution. As a Kim Lighting product, the upgrade kit preserves UL listing and manufacture’s warranty… something that third party retrofits cannot do.

Kim Lighting offers an exclusive “plus one” guarantee on any LED housing that is upgraded with a new Kim Lighting LED EmitterDeck. Customers will enjoy an additional 1-year housing warranty, free of charge.1

Kim Lighting’s MicroEmitter-based LED luminaries can also be upgraded to the latest LED technology as it evolves over time. Replacement EmitterDecks featuring the latest LED technology are available exclusively from Kim Lighting. Description

Total Luminaire Wattage1

Energy Savings (Watt)

Energy Savings (Kw)

Savings Per Yr @ 11 Hrs per night @ $0.10 Per Kwh2

LED LUMINAIRE

140

150W Metal Halide

185

.049

$ 58.07

200W Metal Halide

240

100

.104

$ 80.15

250W Metal Halide

291

151

.115

$100.63

150W HPS

188

.052

$ 59.27

200W HPS

240

100

.104

$ 80.15

250W HPS

295

155

.159

$ 102.23

One-year extension includes existing metal housing components. Existing product conditions are taken as the base point. Participation rules apply. See complete warranty provisions for further details.

1 Total luminaire wattage data is based on The Archetype test report. Assumes HID lamp replacement every three years, includes labor and lamp. 6 KIM LIGHTING | www.kimlighting.com

The Future Is Today

ROHS/WEEE COMPLIANT

PRE AND POST RECYCLED MATERIAL

RENEWABLE ENERGY SOURCE COMPATIBILITY

Preserving Resources Kim Lighting is working closely with numerous organizations to develop industry standards assuring the efficiency, dependability and quality of the LED products that are sold to our customers. Kim Lighting is doing its part to limit hazardous waste and utilizing resources to their fullest. MicroEmitter luminaire housings and LED components meet strict US and international environmental protection laws, and are constructed from more than 90% pre and post recycled materials and are entirely lead and mercury free.

RoHS – Identifies product components with restricted use of hazardous substances. Recyclable – Identifies products that use pre and post recycled materials. Renewable – Identifies products that are compatible with renewable energy systems.

www.kimlighting.com | KIM LIGHTING 7

TYPE 1 1

TYPE II

TYPE IV-NB AVAILABLE FOR WARP9 ONLY.

8 KIM LIGHTING | www.kimlighting.com

TYPE III 2

TYPE IV

TYPE IV - NB1

ONE-WAY IS AVAILABLE AS ONE-WAY LEFT OR ONE-WAY RIGHT DISTRIBUTION.

TYPE V

ONE-WAY2

UNIQUE FEATURES: o

Visual Stealth Luminaire

No Backlight Optical System Option

0-10V Dimming Interface Standard

Upgradeable EmitterDeck™

WARP9 LED Upgradeable EmitterDeck

WARP9 LED ®

WARP9 LED is the first Kim Lighting luminaire to employ the patent-pending MicroEmitter™ technology. Combining the robust technology with a rugged, visually stealth housing, an upgradeable LED module, and progressive warranty protection, WARP9 LED is a modern, energy efficient, sustainable LED solution. WARP9 LED comes in two sizes and is available for pole and wall mount configurations.

RELATED PRODUCTS:

GEM Bollard LED

This is LED site lighting perfection. This is Kim Lighting.

Wall Director LED

KIM LIGHTING HONORED WITH SSL PRODUCT INNOVATIONS AWARDS (PIA) Kim’s WARP9 LED received a Platinum Award in the Application category of “most energy efficient use of solid state lighting.” ®

Lightvault LED

www.kimlighting.com | KIM LIGHTING 9

WARP9 LED Ordering Example:

1SA / WP9LE3 / 120L5K240 / SG / A-35 / PRA20-4188SA / SG / VSF-1SA_ 1

1 Mounting 3SY configuration is available for round poles only.

Catalog no. designates fixture and light distribution.

5-12

14 Wall Mount

Plan View: EPA WP9S: EPA WP9L: Cat. No.:

2 Fixture

0.52 0.95 1SA

1.04 1.9 2SB

0.82 1.47 2SL

1.3 2.4 3ST

1.3 2.4 3SY

HOUSING WP9 = WARP9 LED

n/a n/a 1W

Light Distribution

WP9

1.5 2.7 4SC

DRIVER E = Electronic DISTRIBUTION1 1 = Type I 2 = Type II 3 = Type III 4 = Type IV 4NB = Type IV-NB, No Backlight 5 = Type V, Square R = Type R, Right L = Type L, Left 1 All distributions are classified as full cutoff

SIZE S = Small, 60 LEDs, 73W L = Large, 120 LEDs, 140W

Type1

Type II

Type III

Type IV Forward Throw

Type IV-NB No Backlight

Type V Square

Type R Right

Type L Left

3 Electrical Module SOURCE 60L = 60 LEDs, WP9S 120L = 120 LEDs, WP9L COLOR TEMPERATURE 2 3K = 3500K 5K = 5100K 2K = 580nm Amber

4 Finish Super TGIC powder coat paint over titanated zirconium conversion coating.

5 Wall Mounting:

6 Optional Fusing:

10 KIM LIGHTING | www.kimlighting.com

Color: Stealth Gray Cat. No.: SG

Light Gray LG

VOLTAGE 120 = 120V 208 = 208V 240 = 240V 277 = 277V 347 = 347V3 480 = 480V3

Platinum Silver PS

4300K and 6500K are also available on an “Engineered to Order” basis. 3 Due to current unavailability of 347V and 480V drivers, specification of these voltages may feature an integral step-down transformer. Driver compartment door extends down 1" on small housing. See page 22.

White WH

Black BL

Dark Bronze DB

Custom Colors CC Consult your Kim Lighting representative for custom colors.

Cat. No.:

A cast-aluminum mounting plate is mounted to the wall with four bolts (by others). Fixture and arm are mounted to the cast aluminum cover plate before attaching to the wall mounting plate. The fixture-arm-cover plate assembly is hooked to the wall mounting plate and secured with stainless steel screws provided. Field splices are made at the opening in the cover plate. Cover is finished to match arm and fixture color.

High temperature fuse holders factory installed inside the fixture housing. Fuse is included. Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.: SF DF DF SF SF DF

Ordering Information Cat. No.:

7 Optional Photocell:

A-25 Receptacle A-30 - A-35 Button

Receptacle

Two types of photocell controls are available. A receptacle for a NEMA base photocell (by others) is located above the electrical compartment. Also available is an internal photocell with a button sensor on the left side of the fixture. For all multiple-fixture pole mountings with two or three fixtures, one fixture has a receptacle to operate the others.

Button

8 Optional Lexan® Flat Lens:

Cat. No.: LS

Lexan® Lens

9 Optional Tamper-Resistant Latches:

Tamper-Resistant Latch

10 Optional Horizontal Slipfitter Mount:

CAUTION: Use only when risk of vandalism is anticipated to be high. For LED use only. Cat. No.:

Standard die-cast latches are optical cavity and electrical cavity provided with a captive 10-32 stainless steel flat socket-head screw to prevent unauthorized opening. Required only for vandal protection in locations where fixtures may be reached by unauthorized persons.

Cat. No.:

HSF

Replaces standard mounting arm with a slipfitter for mounting to a horizontal pole davit-arm with 2" pipe-size mounting end (2 C " O.D.). Provides ±5° vertical fixture adjustment.

Slipfitter

11 Special Option for Street Lighting: Dimming Controls: 12 Contact factory for further details and current capabilities.

13 Poles:

14 Optional Vertical Slipfitter Mounts:

One-piece flat advanced polycarbonate replaces standard tempered glass lens.

Cat. No.: TB

Terminal Block located inside the fixture electrical compartment. (For Large WARP9 LED only.) TM

WARP9 LED driver features a 0-10V dimming interface on the LifeShield device, allowing 0-100% illumination output when synchronized with a control or dimming system (provided by others). Kim Lighting is working with several control system manufacturers to develop a variety of proven turnkey solutions to meet any application’s need. Kim Lighting will advise availability of complete control packages, and even two-way monitoring systems, once they have been tested and exceed Kim's high quality standards. See Kim Arms and Poles Selection Guide for a complete selection of round and square poles in aluminum and steel.

Round

Square

Cat. No.:

VSF-1SA VSF-2SB VSF-2SL VSF-3ST VSF-3SY VSF-4SC

SVSF-1SA SVSF-2SB SVSF-2SL SVSF-3ST -------------SVSF-4SC

Mounting Configuration 1SA - Single arm mount 2SB - 2 at 180° 2SL - 2 at 90° 3ST - 3 at 90° 3SY - 3 at 120° 45 - 4 at 90°

Allows standard fixture and arm to be mounted to poles having a 2 pipe-size tenon (2C " O.D. x 4K " min. length).

Lexan is a registered trademark owned by GE Advanced Materials www.kimlighting.com | KIM LIGHTING 11

Small Specs WP9SE Small LED 60 LEDs EPA: .52 Maximum Weight: 17 lbs. Maximum System Watts = 73 W

Large Specs WP9LE Large LED 120 LEDs EPA: .95 Maximum Weight: 35 lbs. Maximum System Watts = 140 W

TOP 26I"

4B"

(684 mm)

(105 mm)

8I" (227 mm)

TOP 35B"

5K"

(892 mm)

(140 mm)

10M" (262 mm)

1" 1K" (38 mm)

8I"

(25 mm) 347/480V Driver1

(227 mm)

FRONT

5N" (141 mm)

10M"

1I"

FRONT

SIDE

5I"

(262 mm)

(49 mm)

(151 mm)

SIDE

4G"

5B"

(113 mm)

20"

15"

(508 mm)

(381 mm)

BOTTOM

BOTTOM 1

(130 mm)

Driver compartment door extends down 1" on small housing to accommodate integral step-down transformer on 347V and 480V models (only).

Specifications HOUSING: One-piece die-cast, low copper alloy (<0.6% Cu) aluminum with integral cooling ribs over the electrical compartment. Solid barrier wall separates optical and electrical compartments. A single die-cast aluminum cam-latch provides positive locking and sealing of the optical chamber. A one-piece extruded and vulcanized silicone gasket seals the housing against the lens surface. ELECTRONIC MODULE: One-piece die-cast, low copper alloy (<0.6% Cu) aluminum with integral cooling ribs over exposed bottom surface. Integral hinges and slide latch with stainless steel hardware provides no-tool mounting and removal from housing. Modules include a driver, thermal control device and surge protector. Driver is rated for -40° starting and features a 0-10V dimming interface on the LifeShield® device. All electronic components are UL recognized and mounted directly to the driver tray for maximum heat dissipation. LENS: Clear F" thick tempered glass lens retained by a stainless steel piano hinge and a single die-cast aluminum cam-latch. The edges are camouflaged to conceal the outer portion of the housing. LISTINGS AND RATINGS ETL listed to UL 1598 standards1 1

IP66 Rated

25°C Ambient

Suitable for wet locations Kim Lighting reserves the right to change specifications without notice.

12 KIM LIGHTING | www.kimlighting.com

OPTICAL MODULE: Precision injection molded, high specular reflectors are positioned to achieve directional control toward desired task. Secondary high specular reflector 95% Miro4 panels surround the module to redirect light downward. No fasteners are placed on the reflective surface. The entire assembly fastens to the housing as a one-piece module and features wiring quick-connects for easy upgrading. SUPPORT ARM: Heavy cast, low copper alloy aluminum with stainless steel mounting bolts. A pole reinforcing plate is provided with wire strain relief. Arm is circular cut for specified round pole. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black, Dark Bronze, Stealth Gray, Platinum Silver, or White. Custom colors are available. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury.

Photometry Type III - 120 LED

4 3 2

-3

-2

-1

HO US E

0 ST

UP LIGHT 0 lm. 0% 180°

100°

BACK LIGHT 1383 lm. 18.6%

100°

BVH 90° = 0.7%

FORWARD LIGHT 6049 lm. 81.4% FVH 90° = 2.0%

4 BH 80° = 7.8%

LM-79-2008 Test Results

FH 80° = 32.6%

Report Number KL02038A FM 60° = 38.7%

BM 60° = 7.4%

Mounting Height 20 Feet Light Dist. Type Type III Total Flux

BL 30° = 2.8%

7432 Lm.

FL 30° = 8.2%

System Watts 140W

0°

Type V - 120 LED 2 2

2 HO 1 US E

1 .2

1 2 2

LM-79-2008 Test Results Report Number

KL02041

Mounting Height

20 Feet

Light Dist. Type Total Flux System Watts

Type V

0 ST

UP LIGHT 0 lm. 0% 180°

BACK LIGHT 3602 lm. 50.2%

100°

BVH 90° = 1.6%

100°

FORWARD LIGHT 3572 lm. 49.8% FVH 90° = 1.3%

BH 80° = 20.1%

FH 80° = 19.9%

FM 60° = 23.0%

BM 60° = 23.1%

7174 Lm. 140W

Log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library. For custom optical and color temperature configurations, contact factory.

BL 30° = 5.4%

FL 30° = 5.6%

0°

www.kimlighting.com | KIM LIGHTING 13

TYPE II

14 KIM LIGHTING | www.kimlighting.com

TYPE III

TYPE IV

TYPE V

ONE-WAY RIGHT

ONE-WAY LEFT

UNIQUE FEATURES: o

Architectural Element Options

0-10V Dimming Interface Standard

Upgradeable EmitterDeckâ&#x201E;˘

Optional Support Arms

Structural LED Upgradeable EmitterDeck

Structural LED The elegant form of Structural LED is an orchestrated combination of simple shapes in a dynamic architectural luminaire. The addition of optional structural elements produces a beautiful enhancement to structurally expressive architecture. Structural LED combines state-of-the-art LED performance, materials, and ergonomics to create a low glare and low maintenance lighting solution. Structural LED comes in two sizes, multiple distributions and is available for pole and wall mount configurations.

RELATED PRODUCTS:

CFL LED

This is LED site lighting perfection. This is Kim Lighting. ÂŽ

MiniBounce Bollard LED

TR Truss

TS Single Tension

TD Double Tension

Round Wall Form LED

www.kimlighting.com | KIM LIGHTING 15

STRUCTURAL

Structural LED 1SA / STS3 / 60L5K120 / LG / A-25 / PRA20-4188SA / LG / VSF-1SA_

Ordering Example:

1 1 Mounting 3SY configuration is available for round poles only.

2 Fixture

5-13

Plan View: STS EPA: 1.1 Cat. No. : 1SA

2.2 2SB

1.5 2SL

2.6 3ST

2.6 3SY

2.7 4SC

_ 1W

STL EPA: 2.2 Cat. No. : 1A

4.4 2B

2.8 2L

5.0 3T

5.0 3Y

5.3 4C

_ 1W

DISTRIBUTION 2 = Type II Full Cutoff 3 = Type III Full Cutoff 4 = Type IV Full Cutoff 5 = Type V Square Full Cutoff R = Type R Right Full Cutoff L = Type L Left Full Cutoff

HOUSING ST = Structural

SIZE S = Small, 60 LEDs, 73W L = Large, 120 LEDs, 140W

3 Electrical Module

SOURCE 60L = 60 LEDs, STS 120L = 120 LEDs, STL

COLOR TEMPERATURE1 3K = 3500K 5K = 5100K 2K = 580nm Amber 1

4 Finish Super TGIC powder coat paint over titanated zirconium conversion coating.

5 Wall Mounting:

Cat. No.:

(108.0 mm)

(260.4.mm)

STS Wall Mount

5F"

(131.8 mm)

Wall Embedment Bracket

Optional Photocell Sensor or Receptacle: Receptacle provided for NEMA base photocells (by others).

STL Wall Mount

A-30 to A-35 Sensor for STS only

A25 Receptacle for STL only

4300K and 6500K are also available on an “Engineered to Order” basis

Color: Stealth Gray Light Gray Platinum Silver White Cat. No.: SG LG PS WH

4J"

10J"

Cat. No.: A-30 A-31 A-32 A-33 A-35 A-34 A-25

Cat. No.: CGL

Optional Convex Glass Lens:

VOLTAGE 120 = 120V 208 = 208V 240 = 240V 277 = 277V 347 = 347V2 480 = 480V2

Black BL

Type II

Type III

Type IV

Type V Square

Type R Right

Type L Left

Due to current unavailability of 347V and 480V drivers, specification of these voltages for STS models shall feature an integral step-down transformer.

Dark Bronze Custom Colors DB CC

Consult your Kim Lighting representative for custom colors.

Modified support arm with side access to allow field splices within the arm,for poured concrete walls only. (STS) mounted to wall using one C"-16 external bolt and one C" draw bolt threaded into the wall embedment bracket. (STL) is mounted to wall using C"-16 arm draw bolts threaded into the electro-zinc plated steel wall embedment bracket. Aluminum bearing plate provided to cover junction box, finished to match fixture. Wall embedment bracket (included with wall mounted luminaires) provides C"16 bolt receptacles welded in a galvanized re-bar cage for casting into poured-in-place concrete walls. (STS) Bolt receptacles receive fixture attachment bolts. (STL) Bolt receptacles receive standard draw bolts inside fixture arm, or any C"-16 bolt (by others).

Optional Polycarbonate Lens:

120V 208V 240V 277V 347V 480V

Mounting Configuration 3 – Fixture with Photocell Receptacle s – slave unit(s)

1SA, 1A or 1W 3

s s

2SB or 2B s 3

s 3

2SL or 2L 3ST, 3T, 3SY or 3Y 4SC or 4C

Tempered convex glass lens replaces standard flat lens. NOTE: Brightness control goes from zero uplight to ≤2% uplight

Convex Lens

Wall Mount

Light Distribution

Catalog no. designates fixture and light distribution.

Cat. No.: LS

Flat, polycarbonate Lens replaces standard tempered glass lens.

Polycarbonate Lens

Optional Dimming Controls:

16 KIM LIGHTING | www.kimlighting.com

Structural LED driver driver features a 0-10V dimming interface on the LifeShield device, allowing 0-100% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting is working with several control system manufacturers to develop a variety of proven turnkey solutions to meet any application’s need. Kim Lighting will advise availability of complete control packages, and even two-way monitoring systems, once they have been tested and exceed Kim’s high quality standards.

STRUCTURAL

Ordering Information 10 Optional Vertical Slipfitter Mounts: Mounting Configuration STS

STL

1SA 2SB 2SL 3ST 3SY 4SC

1A 2B 2L 3T 3Y 4C

Single arm mnt. 2 at 180° 2 at 90° 3 at 90° 3 at 120° 4 at 90°

For existing pole installation or for use with poles provided by others.

For Standard Fixtures

NOTE: For Fixtures with Structural Options Only

Cat. No. for 4" Round: STS STL VSF-1SA VSF-1A VSF-2SB VSF-2B VSF-2SL VSF-2L VSF-3ST VSF-3T VSF-3SY VSF-3Y VSF-4SC VSF-4C

Cat. No. for 4" Square: STS STL SVSF-1SA SVSF-1A SVSF-2SB SVSF-2B SVSF-2SL SVSF-2L SVSF-3ST SVSF-3T — — SVSF-4SC SVSF-4C

Cat. No. for 4" Round: STS STL STRF-1SA STRF-1A STRF-2SB STRF-2B STRF-2SL STRF-2L STRF-3ST STRF-3T STRF-3SY STRF-3Y STRF-4C STRF-4C

Cat. No. for 4" Square: STS STL STSF-1SA STSF-1A STSF-2SB STSF-2B STSF-2SL STSF-2L STSF-3ST STSF-3T — — STRF-4SC STSF-4C

Allows fixture, arm, and Structural Option (when applicable) to be mounted to steel poles having a steel 2" pipe-size tenon (2C" O.D. x 4K" min. length). Not available for GS Gusset.

11 Optional Support Arm: NOTE: Refer to Kim Lighting’s

Architectural Arms Catalog for complete details. Optional Support Arm cannot be used with #13 Pole Mounted Structural Option. Refer to Architectural Arms Catalog for wall mounting feature.

Cat. No.:

Swept Solid Arm

Swept Hollow Arm

Upsweep Solid Arm

Upsweep Hollow Arm

Uplift Adjustable Aluminum Arm

STS STL AA02 AA01

STS STL AA04 AA03

STS STL AA06 AA05

STS STL AA08 AA07

STS STL AA10 AA09

Uplift Adjustable Stainless Steel Arm STS AA12

STL AA11

STS 1.3 2.6 1.8 3.1 3.1 3.5

STL 2.6 5.2 3.2 5.8 5.8 6.1

EPA for Fixture and Arm Mounting1: 1SA / 1A 2SB / 2B 2SL / 2L 3ST / 3T 3SY / 3Y 4SC / 4C

STS 1.0 2.0 1.4 2.4 2.4 2.5

STL 2.2 4.4 2.8 5.0 5.0 5.3

STS 0.9 1.8 1.3 2.2 2.2 2.3

STL 1.8 3.6 2.4 4.2 4.2 4.5

STS 1.1 2.2 1.5 2.6 2.6 2.7

STL 2.4 4.8 3.0 5.4 5.4 5.7

STS 1.0 2.0 1.4 2.4 2.4 2.5

STL 1.9 3.8 2.5 4.4 4.4 4.7

STS 1.3 2.6 1.8 3.1 3.1 3.5

STL 2.6 5.2 3.2 5.8 5.8 6.1

See page 20, #1 Mounting for details.

12 Optional Horizontal Slipfitter Mount:

Cat. No.: HSF

Replaces standard mounting arm with a slipfitter for mounting to a horizontal pole davit-arm with 2" pipe-size mounting end (2C" O.D.). Provides ±5° vertical fixture adjustment.

Cat. No.: TB Cat. No.: AF

Terminal Block located inside the fixture electrical compartment. Air Filter to allow ventilation through the optical chamber.

Slipfitter

13 Special Options for Street Lighting: 14 Structural Option: NOTE: For use with Standard Straight Arm Only. Pole Mounted Structural Option cannot be used with #10 Optional Support Arm.

Pole Mounted Structural Options Single Tension Double Tension

Cat. No.: TSP - Rod and clevis painted to match fixture. TSN - Stainless steel rod with nickel plated clevis.

Cat. No.: TDP - Rod and clevis painted to match fixture. TDN - Stainless steel rod with nickel plated clevis.

Wall Mounted Structural Options Single Tension Double Tension

Cat. No.: TSP-W - Rod and clevis painted to match fixture. TSN-W - Stainless steel rod with nickel plated clevis.

15 Poles:

Cat. No.: TDP-W - Rod and clevis painted to match fixture. TDN-W - Stainless steel rod with nickel plated clevis.

Truss

Gusset

Cat. No.: TR

Cat. No.: GS

Truss

Gusset

Cat. No.: TR-W

Cat. No.: GS-W

See Kim Pole Catalog for a complete selection of round and square poles in aluminum or steel.

Lexan is a registered trademark owned by GE Advanced Materials www.kimlighting.com | KIM LIGHTING 17

STRUCTURAL

Specifications STS Small LED 60 LEDs Maximum Weight: 35 Maximum System Watts = 73W

STL Large LED 120 LEDs Maximum Weight: 55 Maximum System Watts = 140 W

TOP

9K"

(177.8 mm)

(241.3 mm)

(152.4 mm)

FRONT

(203.2 mm)

19D"

26"

(489.5 mm)

(660.4 mm)

SIDE

5K"

SIDE

(139.7 mm)

Arm cross-section

26"

19D"

(660.4 mm)

(489.5 mm)

(50.8 mm)

7J"

12"

(184.2 mm)

16"

(304.8 mm)

2J"

(406.4 mm)

(57.2 mm)

Arm cross-section

BOTTOM

Lens shall be clear glass LED reflector module not shown

HOUSING: One-piece die-cast, low copper (<0.6% Cu) aluminum alloy with integral cooling fins on top surfaces above the optical chamber and electrical compartment. A solid barrier wall separates the optical and electrical compartments, with gasketed wire penetrations. A double-thick wall with gussets is provided on the support arm mounting end. All hardware is stainless steel.

OPTICAL MODULE: Precision, replaceable MicroEmitters are positioned to achieve directional control toward desired task. Secondary MicroEmitters surround the module to redirect light downward. No fasteners are placed on the reflective surface. The entire EmitterDeck fastens to the housing as a one-piece module. SUPPORT ARM: One-piece extruded aluminum with internal bolt guides. Luminaire-to-pole attachment is by internal draw bolts, and includes a pole reinforcing plate with wire strain relief. For mounting to round poles, arm is circular cut for precise mating to the pole diameter.

LENS FRAME: One-piece die-cast, low copper (<0.6% Cu) aluminum alloy with a 1” minimum thickness around the gasket flange for rigidity. Integral hinges with stainless steel pins provide no-tool mounting and removal from the housing. Two stainless steel thumblatches are recessed into the front corners, concealed from normal view. Lens frame seals against the housing by a one-piece extruded silicone gasket with vulcanized end closure. Clear F” thick tempered flat glass is retained in the frame by eight clips with full silicone gasketing around the perimeter.

FINISH/COLOR: Finish is super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available.

ELECTRONIC MODULE: All electrical components are UL recognized, mounted on a single plate and factory prewired with quick disconnect plugs. Modules include a driver, thermal control device and surge protector. Driver is rated for -40° starting and features a 0-10V dimming interface on the LifeShield® device.

CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury.

LISTINGS AND RATINGS ETL listed to UL 1598 standards1 1

IP66 Rated

25°C Ambient

Suitable for wet locations Kim Lighting reserves the right to change specifications without notice.

18 KIM LIGHTING | www.kimlighting.com

STRUCTURAL

Photometry Type III - 120 LED

4 3

2 -3 -2 US

-1

0 ST

1 .1

UP LIGHT 0 lm. 0% 180°

100°

BACK LIGHT 1086 lm. 17.4%

FORWARD LIGHT 5149 lm. 82.6%

100°

BVH 90° = 0.7%

FVH 90° = 2.5%

BH 80° = 8.8%

FH 80° = 40.1%

FM 60° = 34.2%

BM 60° = 6.1%

LM-79-2008 Test Results

BL 30° = 1.8%

FL 30° = 5.7%

Report Number KL02057 Mounting Height 20 Feet

0°

Light Dist. Type Type III Total Flux

6235 Lm.

System Watts 140W

Type V - 120 LED 4 3

1 1 .5

UP LIGHT 0 lm. 0% 180°

1 HO

1 2 2

LM-79-2008 Test Results Report Number

KL02052

Mounting Height

20 Feet

Light Dist. Type Total Flux System Watts

Type V 6468 Lm.

BACK LIGHT 3228 lm. 49.9%

100°

BVH 90° = 1.3%

100°

FORWARD LIGHT 3240 lm. 50.1% FVH 90° = 1.7%

BH 80° = 19.9%

FH 80° = 20.1%

FM 60° = 23.3%

BM 60° = 23.6%

4 BL 30° = 5.0%

140W

For complete photometric results on all standard Structural LED offerings, log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library. For custom optical and color temperature configurations, contact factory.

FL 30° = 5.0%

0°

www.kimlighting.com | KIM LIGHTING 19

TYPE II

20 KIM LIGHTING | www.kimlighting.com

TYPE III

TYPE IV

TYPE V

ONE-WAY RIGHT

ONE-WAY LEFT

UNIQUE FEATURES: o

Signature Aesthetic Design

Universally Complements Architectural Styles

0-10V Dimming Interface Standard

Upgradeable EmitterDeck™

The Archetype LED Upgradeable EmitterDeck

The Archetype LED ®

The eclectic shape of The Archetype LED readily adapts to and universally complements contemporary architectural design. Lighting performance, materials, innovative construction, and the latest solid state lighting technology combine to make The Archetype LED the state-of-the-art outdoor lighting luminaire for a broad range of applications. The Archetype LED comes in two sizes and is available for pole and wall mount configurations.

RELATED PRODUCTS:

Wall Director LED

This is LED site lighting perfection. This is Kim Lighting. Compact Flood LED

Site Light Form LED

www.kimlighting.com | KIM LIGHTING 21

The Archetype LED ®

1SA / SAR3 / 60L5K120 / DB / A-25 / PRA20-4188SA / DB

Ordering Example:

1 1 Mounting 3SY configuration is available for round poles only.

5-14

Plan View: SAR EPA: 0.7 Cat. No. : 1SA AR

EPA: 1.2 Cat. No. : 1A

1.4 2SB

1.2 2SL

1.9 3ST

1.9 3SY

2.5 4SC

_ 1W

2.4 2B

2.0 2L

3.2 3T

3.2 3Y

3.9 4C

_ 1W

2 Fixture

Light Distribution

Catalog no. designates fixture and light distribution.

HOUSING SAR = Small, 60 LEDs, 73W AR = Large, 120 LEDs, 140W

DISTRIBUTION 2 = Type II Full Cutoff 3 = Type III Full Cutoff 4 = Type IV Full Cutoff 5 = Type V Square Full Cutoff R = Type R Right Full Cutoff L = Type L Left Full Cutoff

Type II

Type III

Type IV ForwardThrow

Type V Square

Type R Right

Type L Left

3 Electrical Module

SOURCE 60L = 60 LEDs, SAR 120L = 120 LEDs, AR

COLOR TEMPERATURE 3K = 3500K 5K = 5100K 2K = 580nm Amber 1

4 Finish Super TGIC powder coat paint over titanated zirconium conversion coating.

5 Wall Mounting:

Cat. No.:

(108.0 mm)

J-box

10J"

4L"

(260.4.mm)

SAR Wall Mount

5F"

(131.8 mm)

Adapter Plate for SAR

Wall Embedment Bracket (WEB) for AR

Optional Photocell Sensor or Receptacle: Receptacle provided for NEMA base photocells (by others).

AR Wall Mount

A-30 to A-35 Sensor for SAR only

A25 Receptacle for AR only

Optional Dimming Controls:

22 KIM LIGHTING | www.kimlighting.com

4300K and 6500K are also available on an “Engineered to Order” basis

Color: Stealth Gray Light Gray Platinum Silver White Cat. No.: SG LG PS WH

4J"

Wall Mount

VOLTAGE 120 = 120V 208 = 208V 240 = 240V 277 = 277V 347 = 347V2 480 = 480V2

Black BL

Due to current unavailability of 347V and 480V drivers, specification of these voltages shall feature an integral step-down transformer. For SAR models only.

Dark Bronze Custom Colors DB CC

Consult your Kim Lighting representative for custom colors.

SAR Fixture mounts to 3" or 4" junction boxes by a cast aluminum adapter plate with fixture mounting bolts. NOTE: Junction box in wall must provide adequate fixture support. See NEC sections 370-13, 17 and 410-14, 16. Quick-disconnect plug and wiring are provided to allow field connections prior to fixture mounting. AR Fixture mounted to poured concrete walls only. A modified support arm is provided with side access to allow field splices within the arm. A wall embedment bracket (WEB) is provided to accept draw bolts, and a trim plate covers the wall-embedded junction box. All wall mount components are finished to match the fixture. Cat. No.: A-30 A-31 A-32 A-33 A-35 A-34 A-25

120V 208V 240V 277V 347V 480V

Mounting Configuration 3 – Fixture with Photocell Receptacle s – slave unit(s)

1SA, 1A or 1W 3

s s

2SB or 2B s 3

s 3

2SL or 2L 3ST, 3T, 3SY or 3Y 4SC or 4C

The Archetype LED driver features a 0-10V dimming interface on the LifeShield device, allowing 0-100% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting is working with several control system manufacturers to develop a variety of proven turnkey solutions to meet any application’s need. Kim Lighting will advise availability of complete control packages, and even two-way monitoring systems, once they have been tested and exceed Kim’s high quality standards.

Ordering Information 8

Cat. No.: CGL

Optional Convex Glass Lens:

Tempered convex glass lens replaces standard flat lens. NOTE: Brightness control goes from Full Cutoff to Cutoff.

Convex Lens

Optional Polycarbonate Lens:

Cat. No.: LS

Polycarbonate Lens replaces standard tempered glass lens.

Cat. No.: TL

Standard die-cast latch is provided with a captive 10-32 stainless steel flat socket-head screw to prevent unauthorized opening. Required only for vandal protection in locations where fixtures can be reached by unauthorized persons.

Cat. No.: HSF

Replaces standard mounting arm with a slipfitter for mounting to a horizontal pole davit-arm with 2" pipe-size mounting end (2C" O.D.). Provides ±5° vertical fixture adjustment.

Cat. No.: AF Cat. No.: TB

Air Filter to allow ventilation through the optical chamber. Terminal Block located inside the fixture electrical compartment. (AR) only

Polycarbonate Lens

10 Optional TamperResistant Latch: Tamper-Resistant Latch

11 Optional Horizontal Slipfitter Mount: Slipfitter

12 Special Options for Street Lighting:

Terminal Block

Air Filter

13 Optional Vertical Slipfitter Mounts: Mounting Configuration SAR

1SA 2SB 2SL 3ST 3SY 4SC

1A 2B 2L 3T 3Y 4C

Single arm mnt. 2 at 180° 2 at 90° 3 at 90° 3 at 120° 4 at 90°

Pole with 2" pipe-size tenon (by others)

Vertical Slipfitter Mount by Kim

Cat. No. for 4" Round: SAR AR VSF-1SA VSF-1A VSF-2SB VSF-2B VSF-2SL VSF-2L VSF-3ST VSF-3T VSF-3SY VSF-3Y VSF-4C SVSF-4SC

Cat. No. for 4" Square: SAR AR SVSF-1SA SVSF-1A SVSF-2SB SVSF-2B SVSF-2SL SVSF-2L SVSF-3ST SVSF-3T — VSF-4SC SVSF-4C

Allows fixtures, with standard support arm to be mounted to poles having a steel 2" pipe-size tenon (2C" O.D. x 4K" min. length). For existing pole installation or for use with poles provided by others. Note: 3SY available only on round slipfitter.

14 Optional Support Arm: NOTE: Refer to Kim Lighting’s Architectural Arms Catalog for complete details. Refer to Architectural Arms Catalog for wall mounting feature.

Cat. No.:

Swept Solid Arm

Swept Hollow Arm

Upsweep Solid Arm

Upsweep Hollow Arm

Uplift Adjustable Aluminum Arm

SAR AR AA02 AA01

SAR AR AA04 AA03

SAR AR AA06 AA05

SAR AR AA08 AA07

SAR AR AA10 AA09

Uplift Adjustable Stainless Steel Arm SAR AA12

AR AA11

EPA for Fixture and Arm Mounting1: 1SA / 1A 2SB / 2B 2SL / 2L 3ST / 3T 3SY / 3Y 4SC / 4C

15 Poles:

SAR 0.8 1.6 1.3 2.1 2.1 2.7

AR 1.4 2.8 2.2 3.6 3.6 4.3

SAR 0.7 1.4 1.2 1.9 1.9 2.5

AR 1.1 2.2 1.9 3.0 3.0 3.7

SAR 1.0 2.0 1.5 2.5 2.5 3.0

AR 1.7 3.4 2.5 4.2 4.2 4.9

SAR 0.8 1.6 1.3 2.1 2.1 2.7

AR 1.2 2.4 2.0 3.2 3.2 3.9

SAR 1.2 2.4 1.7 2.9 2.9 3.5

AR 1.9 3.8 2.7 4.6 4.6 5.3

SAR 1.2 2.4 1.7 2.9 2.9 3.5

AR 1.9 3.8 2.7 4.6 4.6 5.3

See Kim Pole Catalog for a complete selection of round and square poles in aluminum or steel.

Lexan is a registered trademark owned by GE Advanced Materials

www.kimlighting.com | KIM LIGHTING 23

Specifications SAR Small LED 60 LEDs Maximum Weight: 30 lbs. Maximum System Watts = 73 W

TOP 6" (152 mm)

AR Large LED 120 LEDs Maximum Weight: 50 lbs. Maximum System Watts = 140 W

(127 mm)

TOP 8"

(203 mm)

17B" (435 mm)

FRONT

22K"

FRONT

SIDE

17B"

4J"

(435 mm)

(108 mm)

22K"

12"

(305.mm)

(152.mm)

1L" (45 mm)

Arm cross-section

16" (406 mm)

(51 mm)

BOTTOM

Arm cross-section

Lens shall be clear, tempered glass LED reflector module not shown

BOTTOM Lens shall be clear, tempered glass LED reflector module not shown

HOUSING: One-piece die-cast, low copper (<0.6% Cu) aluminum alloy with integral cooling ribs over the optical chamber and electrical compartment. Solid barrier wall separates optical and electrical compartments. Doublethick wall with gussets on the support-arm mounting end. Housing forms a half cylinder with 55° front face plane providing a recess to allow a flush single-latch detail. All hardware is stainless steel or electro-zinc plated steel. LENS FRAME: One-piece die-cast, low copper (<0.6% Cu) aluminum alloy lens frame with 1” minimum depth around the gasket flange. Integral hinges with stainless steel pins provide no-tool mounting and removal from housing. Single die-cast aluminum cam-latch provides positive locking and sealing of the optical chamber by a one-piece extruded and vulcanized silicone gasket. Clear F” thick tempered glass lens retained by eight steel clips with full silicone gasketing around the perimeter. ELECTRONIC DRIVER MODULE: All electrical components are UL and CSA recognized, mounted on a single plate and factory prewired with quick-disconnect plugs. Electrical module attaches to housing with no-tool hinges and latches, accessible by opening the lens frame only. Drivers are -40°F. starting. Driver features a 0-10V dimming interface on the LifeShieldTM device.

OPTIONAL WALL MOUNTING: Fixture mounted to poured concrete walls only. A modified support arm is provided with side access to allow field splices within the arm. A wall embedment bracket is provided to accept draw bolts, and a trim plate covers the wall-embedded junction box. All wall mount components are finished to match the fixture. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. WARRANTY: Kim Lighting warrants The Archetype LED luminaire to be free from defects in material and workmanhship for (i) a period of five (5) years for metal parts, (ii) a period of ten (10) years for paint finishes, and (iii) a period of six (6) years for LED Light Engines and LED power components, from the date of sale of such goods to the buyer as specified in Kim Lighting shipment documents for each Product. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury.

OPTICAL MODULE: Precision, replaceable MicroEmitters are positioned to achieve directional control toward desired task. The entire EmitterDeck fastens to the housing as a one-piece module. SUPPORT ARM: One-piece extruded aluminum with internal bolt guides and fully radiussed top and bottom. Luminaire-to-pole attachment is by internal draw bolts, and includes a pole reinforcing plate with wire strain relief. Arm is circular cut for specified round pole. 24 KIM LIGHTING | www.kimlighting.com

LISTINGS AND RATINGS ETL listed to UL 1598 standards1 1

IP66 Rated

40°C Ambient

Suitable for wet locations Kim Lighting reserves the right to change specifications without notice.

Photometry Type III - 120 LED

4 3

2 2

-2 -1

0 RE

1 .1

UP LIGHT 0 lm. 0% 180° UH

BACK LIGHT 1086 lm. 17.4%

100°

BVH 90° = 0.7%

FVH 90° = 2.5%

4 BH 80° = 8.8%

LM-79-2008 Test Results

FORWARD LIGHT 5149 lm. 82.6%

FH 80° = 40.1%

Report Number KL02057 FM 60° = 34.2%

BM 60° = 6.1%

Mounting Height 20 Feet Light Dist. Type Type III Total Flux

BL 30° = 1.8%

6235 Lm.

FL 30° = 5.7%

System Watts 140W

0°

Type V - 120 LED 4 3

1 1 .5

UP LIGHT 0 lm. 0% 180°

1 HO

1 2 2

Mounting Height

20 Feet

Light Dist. Type Total Flux System Watts

100°

BVH 90° = 1.3%

3 KL02052

BACK LIGHT 3228 lm. 49.9%

100°

FORWARD LIGHT 3240 lm. 50.1% FVH 90° = 1.7%

3 BH 80° = 19.9%

LM-79-2008 Test Results Report Number

FH 80° = 20.1%

FM 60° = 23.3%

BM 60° = 23.6%

Type V 6468 Lm. 140W

Log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library. For custom optics and color temperature configurations, contact factory.

BL 30° = 5.0%

FL 30° = 5.0%

0°

www.kimlighting.com | KIM LIGHTING 25

Era LED

TYPE 1 1

TYPE II

TYPE III

ONE-WAY IS AVAILABLE AS ONE-WAY LEFT OR ONE-WAY RIGHT DISTRIBUTION.

26 KIM LIGHTING | www.kimlighting.com

TYPE IV

TYPE V

ONE-WAY1

UNIQUE FEATURES: Full Palette of IES Distribution types

Dark Sky Compliant

Heritage Style Family of Luminaires

Upgradeable EmitterDeck™

Era Acorn LED

Era LED Upgradeable EmitterDeck

Era Bell LED

Era , Era Bell & Era Acorn LED ®

Kim brings LED to its Era Family of performance luminaires, expanding them to feature the most current technology in specification-grade outdoor lighting. The family is conceived as a total integration of design and technology.

RELATED PRODUCTS:

Wall Director LED

This family of luminaires is a direct response to the needs of today, engineered with tomorrow’s insight. The Era, Era Bell and Era Acorn product lines are designed to surpass tough demands, such as energy efficiency, glare control, light trespass, aesthetic and structural integrity, all manufactured to Kim’s standards for quality, longevity, and performance. ®

Era Lantern Bollard LED

This is LED site lighting perfection. This is Kim Lighting.

CFL LED

www.kimlighting.comKIM | KIM LIGHTING 27 LIGHTING 1Lenis eumsan esent lutat lam

Era , Era Bell & Era Acorn LED ®

Ordering Example:

1A / RA173 / 60L5K120 / LG / A-30 / HSAS14-534188A - HA01S / LG 1

Mounting:

5-9

11-12

Plan View:

Wall Mount

Cat. No. :

NOTE: 1A, 2B, 3Y, and 4C mounting arms are part of the Pole Assembly or Slipfitter Mount. 1W Wall Mount arm not included and must be ordered separately.

Fixture:

DISTRIBUTION R = Type R Right Full Cutoff 1 = Type I Full Cutoff L = Type L Left Full Cutoff 2 = Type II Full Cutoff 3 = Type III Full Cutoff 4 = Type IV Full Cutoff 5 = Type V Square Full Cutoff

SIZE 17 = 17", 60 LED’s (RA, BE, AE) 21 = 21", 120 LED’s (AE, BE) 25 = 25", 120 LED’s (RA only)

HOUSING RA = Era BE = Era Bell AE = Era Acorn

Catalog no. designates fixture and light distribution.

Light Distribution

Type1

Type II

Type III

1 2

Finish: Super TGIC powder coat paint over titanated zirconium conversion coating.

Type V Square

Type R Right

Type L Left

Electrical Module: SOURCE 60L = 60 LEDs, (RA17, BE17, AE17) 120L= 120 LEDs, (RA25, BE21,AE21)

Type IV Forward Throw

VOLTAGE 120 = 120V 208 = 208V 240 = 240V

COLOR TEMPERATURE 1 3K = 3500K 5K = 5100K 2K = 580nm Amber

277 = 277V 347 = 347V2 480 = 480V2

4300K and 6500K are also available on an “Engineered to Order” basis. Due to current unavailability of 347V and 480V drivers, specification of these voltages shall feature an integral step-down transformer.

Color: Stealth Gray Light Gray Platinum Silver White Cat. No.: SG LG PS WH

Black BL

Dark Bronze Custom Colors Consult your Kim Lighting representative DB CC for custom colors.

Optional Photocell:

Line Volts:

120V

208V

240V

277V

480V

347V

One per fixture required.

Cat. No.:

A-30

A-31

A-32

A-33

A-34

A-35

Photocell

Era

Optional Convex Glass Lens:

Cat. No.: CGL

Era Bell

Era Acorn

Era

Era Bell

The F" thick clear convex tempered glass lens replaces the standard flat glass lens. Provides increased lens presence and provides a subtle improvement in uniformity where pole spacing is extreme. Convex Lens

Optional Polycarbonate Lens:

Cat. No.: LS

One-piece, clear, UV stabilized polycarbonate, fully gasketed, lens replacing the standard tempered glass lens. CAUTION: use only when vandalism is anticipated to be high. Useful life is limited by UV discoloration from sunlight. Polycarbonate Lens

Polycarbonate Lens Era

28 KIM LIGHTING | www.kimlighting.com

Era Bell

Era Acorn

Ordering Information 8

Optional Fusing:

Line Volts:

120V

208V

240V

277V

347V

480V

Cat. No.:

DF Single Fuse

Optional Dimming Controls:

The Era LED driver features a 0-10V dimming interface on the LifeShield® device, allowing 0-100% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting will advise availability of complete control packages, once they have been tested and exceed Kim’s high quality standards.

10 Poles:

Refer to Kim Lighting’s Arms & Poles Selection Guide for ordering and specification information.

11 Optional Support Arm:

NOTE: Wall mount arm is not included and must be ordered separately. Refer to Kim Lighting’s Arms & Poles Selection Guide for details and additional information on arm, tenon and wall mounting.. Ordering example: 1A/RA173/60L5K277/HSAS14-534188A-HA03S

Configuration

Cat. No.:

HA02S/HA02L

HA03S/HA03L

HA11S/HA11L

HA12 S/HA12L

Arm Mount

Tenon Mount

Wall Mount

—

HA31S/HA31L

HA33S/HA33L

HA35S/HA35L

HA37S/HA37L

HA38S/HA38L

Cat. No.: Configuration

HA01S/HA01L

Arm Mount

Tenon Mount

Wall Mount

12 Optional Arm Finial:

Cat. No.: HAF2

Traditional style finial available to close off mounting hub opposite the fixture. Available only on selected Era arms. Refer to Kim Arms & Poles Selection Guide for a complete selection of heritage style finials. Arm Finial

www.kimlighting.comKIM | KIM LIGHTING 29 LIGHTING 1Lenis eumsan esent lutat lam

Specifications ERA® RA17-LED

ERA® BELL BE17-LED

ERA® ACORN AE17-LED

Small Housing, 60 LEDs Maximum System Watts = 73 W

(152 mm)

15C"

16K"

(390 mm)

(391 mm)

(419 mm)

22E" 17"

(582 mm)

17J"

(432 mm)

(438 mm)

17J" (438 mm)

RA25-LED

BE21-LED

AE21-LED

Large Housing, 120 LEDs Maximum System Watts = 140 W

(203 mm)

19M"

22"

(490 mm)

(559 mm)

28H" (728 mm)

21" (533.4 mm)

25"

(635 mm)

21" (533 mm)

HOUSING: (RA) Ballast and Reflector Housings are one-piece die-cast, low copper (<0.6% Cu) aluminum alloy components with integral cooling fins. The Ballast Housing attaches to the Reflector Housing with stainless steel fasteners and is sealed with a silicone gasket. (BE/AE) One-piece, die-cast low copper (<0.6% Cu) aluminum alloy component with integral cooling fins. LENS FRAME AND LENS: (RA) One-piece die-cast, low copper (<0.6% Cu) aluminum alloy. Stainless steel hinges provided for attachment to the Reflector Housing. Stainless steel threaded fasteners provide easy access. The F" thick clear flat or convex tempered glass lens seals against the reflector flange by a one-piece extruded silicone gasket with fused seam, producing a fully sealed optical chamber. (BE/AE) One-piece, die-cast low copper (<0.6% Cu) aluminum alloy. Stainless steel hinges provided for attachment to housing. A single stainless steel thumb latch is provided for toolless entry. For the Era Bell, the 3/16" clear flat lens or convex tempered glass lens (optional polycarbonate) seals against the reflector flange by a one-piece extruded silicone gasket with fused seam, for a fully sealed optical chamber (IP66). For the Era Acorn, the high temperature rated 3/16" thick clear injection molded acrylic acorn enclosure, UV stabilized (optional polycarbonate) seals against the reflector flange by a one-piece extruded silicone gasket with fused seam, for a fully sealed optical chamber (IP66). MOUNTING: Stainless steel bolts are provided to attach the luminaire to the crook arm or swept arm mounting. ELECTRONIC MODULE: All electrical components are UL and CSA recognized, mounted on a single plate and factory prewired with quickdisconnect plugs. Module includes a driver, LifeShield® temperature control device and surge protector. Electrical module attaches to housing with key hole slots, accessible by opening the lens frame and removing optical module. Driver is rated for -40°F starting and has a 0-10V dimming interface on the LifeShield device for multi-level illumination options.

30 KIM LIGHTING | www.kimlighting.com

OPTICAL MODULE: Precision, replaceable MicroEmitter™ reflectors are positioned to achieve directional control toward desired task. The entire EmitterDeck™ mounting assembly fastens to the housing as a one-piece module. FINISH/COLOR: TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. WARRANTY: Kim Lighting warrants Era LED products (“Product(s)”) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of five (5) years for metal parts, (ii) a period of ten (10) years for exterior housing paint finish(s), (iii) a period of six (6) years for LED Light Engines (MicroEmitter reflectors) and, (iv) a period of five (5) years for LED power components (LED Driver, LifeShield temperature control device, surge protector), from the date of sale of such goods to the buyer as specified in Kim Lighting shipment documents for each product. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim Lighting’s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations. CAUTION: Fixtures must be grounded in accordance with national, state and/ or local electrical codes. Failure to do so may result in serious injury. LISTINGS AND RATINGS ETL to UL Standards 1598 & 87501 CE 1

25° C Ambient

Suitable for wet locations Kim Lighting reserves the right to change specifications without notice.

Photometry Era® (RA25) Type III - 120 LED 4 3 2

UP LIGHT 0 lm. 0% 180°

-1

0 ST

2 3

100°

BVH 90° = 0.4%

FORWARD LIGHT 5199 lm. 78.9% FVH 90° = 1.5%

BH 80° = 8.9%

LM-79-2008 Test Results

100°

BACK LIGHT 1390 lm. 21.1%

FH 80° = 36.3%

Report Number 28917 FM 60° = 35.6%

BM 60° = 9.6%

Mounting Height 20 Feet Light Dist. Type Type III Total Flux

BL 30° = 2.2%

6589 Lm.

FL 30° = 5.6%

System Watts 133W

0°

Era® Acorn (AE21) Type V - 120 LED 4 1

3 2

2 .2

HO US E

LM-79-2008 Test Results Report Number

29260

Mounting Height

20 Feet

Light Dist. Type Total Flux System Watts

Type V

1 2 2

BACK LIGHT 3822 lm. 51.2%

UP LIGHT 0 lm. 0% 180° UH

100°

BVH 90° = 2.0%

100°

FORWARD LIGHT 3646 lm. 48.8% FVH 90° = 1.4%

BH 80° = 22.9%

FH 80° = 22.1%

FM 60° = 21.5%

BM 60° = 22.0%

7468 Lm.

BL 30° = 4.2%

FL 30° = 3.8%

133W 0°

Log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library. For custom optics and color temperature configurations, contact factory.

www.kimlighting.comKIM | KIM LIGHTING 31 LIGHTING 1Lenis eumsan esent lutat lam

CURVILINEAR

TYPE 1 1

TYPE II

TYPE III

ONE-WAY IS AVAILABLE AS ONE-WAY LEFT OR ONE-WAY RIGHT DISTRIBUTION.

32 KIM LIGHTING | www.kimlighting.com

TYPE IV

TYPE V

ONE-WAY1

UNIQUE FEATURES: Full Palette of IES Distribution types

Dark Sky Compliant

0-10V Dimming Interface Standard

Upgradeable EmitterDeck™

Curvilinear LED Upgradeable EmitterDeck

Curvilinear LED Kim brings LED to its Curvilinear series of performance luminaires expanding to feature the most current technology in specification-grade outdoor lighting. The Curvilinear LED series is conceived as a total integration of design and technology.

RELATED PRODUCTS:

GEM Bollard LED

This family of luminaires is a direct response to the needs of today, engineered with tomorrow’s insight. The CC/CCS product line is designed to surpass tough demands, such as energy efficiency, glare control, light trespass, aesthetic and structural integrity, all manufactured to Kim’s standards for quality, longevity, and performance. CFL LED

This is LED site lighting perfection. This is Kim Lighting.

Round Wall Form LED

www.kimlighting.comKIM | KIM LIGHTING 33 LIGHTING 1Lenis eumsan esent lutat lam

Curvilinear LED Ordering Example: Shown for Arm Mount

Mounting 3Y configuration is available for round poles only. EPA is for luminaire with standard arm

1A / CC17A3 / 60L5K120 / DB / A-30 / PRA20-4188A /DB 2

5-13

Arm Mount Plan View:

Wall Mount

CC/CCS

Cat. No. : EPA 17" EPA 21"

1A 0.9 1.2

2B 1.8 2.4

2L 1.6 2.2

3T 2.5 3.4

3Y 2.5 3.4

4C 2.8 3.9

1W _ _

Post Top Mount Side View: Cat. No:

CC/CCS

FM Flush Mount

Pole Top Requirements:

PT Post Tenon Mount

17" 3C", 4", 4K" or 5" Dia. 21" 4", 4K", 5", or 6" Dia.

DM Direct Mount

2" Pipe-size Tenon (2C" O.D. x 4L" L 2" Pipe-size Tenon (2C" O.D. x 4L" L)

n/a 3.1" to 3.9" Dia.

17" Post Top Mount EPA is .07. 21" Post Top Mount EPA is 1.0

Fixture Catalog no. designates fixture and light distribution.

CC – 3 horizontal reveals.

Light Distribution DISTRIBUTION 1 = Type I Full Cutoff 2 = Type II Full Cutoff 3 = Type III Full Cutoff 4 = Type IV Full Cutoff 5 = Type V Square Full Cutoff R = Type R Right Full Cutoff L = Type L Left Full Cutoff

HOUSING CC CCS SIZE 17 = 17", 60 LED’s 21 = 21", 120 LED’s A = Arm Mount

CCS – 1 horizontal groove.

Electrical Module for Arm and Post Top Mount:

Finish Super TGIC powder coat paint over titanated zirconium conversion coating.

Wall Mounting for Arm Mount:

COLOR TEMPERATURE 1 3K = 3500K 5K = 5100K 2K = 580nm Amber 4300K and 6500K are also available on an “Engineered to Order” basis

Type V Square

Type R Right

VOLTAGE 120 = 120V 208 = 208V 240 = 240V 277 = 277V 347 = 347V2 480 = 480V2

Color: Stealth Gray Light Gray Platinum Silver White Cat. No.: SG LG PS WH

Cat. No.:

Mounting Plate Cover Plate

Support Arm Access Cover Wall Attachment, J-Box by Others

5K"

4J"

(140 mm)

(108 mm)

(14 mm)

10D"

8L"

(270 mm)

2L"

(70 mm)

(222 mm)

Front

Side

MOUNTING PLATE

34 KIM LIGHTING | www.kimlighting.com

Type II

SOURCE 60L = 60 LEDs, CC17 120L = 120 LEDs, CC21

Type1

Black BL

Type III

Type IV Forward Throw

Type L Left

Due to current unavailability of 347V and 480V drivers, specification of these voltages shall feature an integral step-down transformer.

Dark Bronze Custom Colors Consult your Kim Lighting representative DB CC for custom colors.

A cast mounting plate of 356 alloy, low-copper (<0.6% Cu) aluminum, is mounted to the wall with bolts (by others). Fixture and arm are mounted to a cast 356 alloy aluminum cover plate before attaching to the wall mounting plate. The fixture-arm-cover plate assembly is hooked to the wall mounting plate, and secured with stainless steel screws provided. After mounting to the wall, field splices are made at the opening in the cover plate, then covered by a cast 356 alloy aluminum plate that blends with the cover plate design. Complete fixture-arm-cover plate assembly can therefore be mounted before field splices are made. Cover plate is finished to match arm and fixture powder coat color. CAUTION: Structural integrity of mounting plate attachment to wall is by others.

Ordering Information 6

Optional Photocell for Post Top and Arm Mount:

Photocell

Factory installed photocell in housing with fully gasketed sensor on side wall.

Optional Dimming Controls for Arm and Post Top Mount:

Optional Convex Glass Lens for Post Top and Arm Mount:

Cat. No.:

A-30 A-31 A-32 A-33 A-34 A-35

120V 208V 240V 277V 480V 347V

Optional Polycarbonate Lens for Post Top and Arm Mount:

Polycarbonate Lens

10 Optional Horizontal Slipfitter for Arm Mount: Slipfitter

S – Fixture with Photocell Receptacle s – slave unit(s)

3T or 3Y

Cat. No.: CGL

The F" thick clear convex tempered glass lens replaces the standard flat glass lens. Provides increased lens presence and provides a subtle improvement in uniformity where pole spacing is extreme.

Cat. No.: L17F For 17" L21F For 21"

Clear UV stabilized polycarbonate lens replaces standard flat glass lens, gasketed and integral with lens frame.

Cat. No.: HSF

Replaces standard mounting arm with a slipfitter for mounting to a horizontal pole davit-arm with 2" pipe-size mounting end (2C" O.D.). Provides ±5° vertical fixture adjustment.

CAUTION: Use only when vandalism is anticipated to be high. Useful life is limited by UV discoloration from sunlight.

Three aluminum bands riveted inside the housing reveals. Available in five standard Kim powder coat finishes. Custom colors available.

11 Optional Accent Reveals: For CC series only.

1A or 1W

The Curvilinear LED driver features a 0-10V dimming interface on the LifeShield device, allowing 0-100% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting will advise availability of complete control packages, once they have been tested and exceed Kim’s high quality standards.

Convex Lens

Mounting Configuration

Reveals

Color: Stealth Gray Light Gray Platinum Silver White Black Dark Bronze Custom Colors Consult your Kim Lighting representative Cat. No.: SG-REV LG-REV PS-REV WH-REV BL-REV DB-REV CC-REV for custom colors.

12 Optional Vertical Slipfitter for Arm Mount: Note: 3SY available only on round slipfitter. For existing pole installation or for use with poles provided by others.

Vertical Slipfitter Mount by Kim

Pole with 2" pipe-size tenon (by others)

Mounting Configuration Cat. No. for 4" Round: Cat. No. for 4" Square: 1A - Single arm mnt. VSF-1A SVSF-1A 2B - 2 at 180° VSF-2B SVSF-2B 2L - 2 at 90° VSF-2L SVSF-2L 3T - 3 at 90° VSF-3T SVSF-3T 3Y - 3 at 120° VSF-3Y — 4C - 4 at 90° VSF-4C SVSF-4C Allows fixtures, with standard support arm to be mounted to poles having a steel 2" pipe-size tenon (2C" O.D. x 4K" min. length).

13 Optional Support Arm for Arm Mount:

NOTE: Refer to Kim Lighting’s Arms and Poles Selection Guide for complete details.

14 Poles:

See Kim Lighting’s Arms and Poles Selection Guide for a complete selection of round or square poles in aluminum or steel.

www.kimlighting.comKIM | KIM LIGHTING 35 KIM LIGHTING 11 LIGHTING 1Lenis eumsan esent lutat lam

Specifications CC/CCS17 Small LED 60 LEDs Maximum System Watts = 73 W

CC/CCS21 Large LED 120 LEDs Maximum System Watts = 140 W

(152 mm)

(51 mm)

Arm Section

CC17A

4K"

CC21A 21" DIA.

17" DIA. (431.8 mm)

(533 mm)

(432 mm)

CC21P

(114 mm)

17" DIA.

(203.2 mm)

CC17P

4K"

(114.3 mm)

10"

(254 mm)

CCS21A

CCS17P

(533 mm)

10"

(203 mm)

9K"

(229 mm)

CCS17A

21" DIA.

(241 mm)

5K" DIA.

CCS21P

(139.7 mm)

HOUSING: Spun aluminum. (Rollformed linear reveals; CC: Three equally spaced reveals, K" wide, separated by K" ribs, J" deep. CCS: One J" groove, J" deep.) Sidewalls have a maximum 1° of taper, and are free of welds or fasteners. A rollformed aluminum flange is hemmed into the bottom providing support for the reflector module. An internal aluminum casting provides for mounting of the electrical module and support for the housing hinge. LENS FRAME ASSEMBLY: One-piece cast aluminum lens frame is attached to the housing by a zinc plated cold rolled steel hinge with a stainless steel pin. Closure of the housing is by three self-retained stainless steel screws. A stainless steel self-locking stop arm is provided to hold the housing in the open position while servicing. A F" thick clear flat tempered glass lens is fully gasketed by a one-piece extruded and vulcanized silicone gasket. Lens is retained in the frame by removable zinc plated steel clips. STANDARD ARM MOUNTING: Arm is one-piece extruded aluminum with internal bolt guides and fully radiussed top and bottom. Luminaire-to-pole attachment is by internal draw bolts, and includes a pole reinforcing plate with wire strain relief. Arm is circular cut to mate with specified round pole. POST TOP MOUNT YOKE: Lens frame is supported at four points by two aluminum U-shaped tubular arms cradled in a cast aluminum hub. Arms are welded to the lens frame, and welded to the hub along their longitudinal axis. Hub contains a field-splice compartment, a cast aluminum cover and one of the following pole attachment means: FM - Flush Mounting, PT - Pole Tenon mounting, or DM - Direct Mounting. ELECTRONIC MODULE: All electrical components are UL and CSA recognized, mounted on a single plate and factory prewired with quick-disconnect plugs. Module includes a driver, LifeShield® temperature control device and surge protector. Electrical module attaches to housing with key hole slots, accessible

36 KIM LIGHTING | www.kimlighting.com

6L" DIA. (172 mm)

by opening the lens frame and removing optical module. Driver is rated for -40°F starting and has a 0-10V dimming interface on the LifeShield device for multi-level illumination options. OPTICAL MODULE: Precision, replaceable MicroEmitter™ reflectors are positioned to achieve directional control toward desired task. The entire EmitterDeck™ mounting assembly fastens to the housing as a one-piece module. FINISH/COLOR: Finish is TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. SUPPORT ARM: One-piece extruded aluminum with internal bolt guides and fully radiussed top and bottom. Luminaire-to-pole attachment is by internal draw bolts, and includes a pole reinforcing plate with wire strain relief. Arm is circular cut for specified round pole. OPTIONAL WALL MOUNTING: A cast-aluminum mounting plate is mounted to the wall with four bolts (by others). Fixture and arm are mounted to the cast aluminum cover plate before attaching to the wall mounting plate. The fixturearm-cover plate assembly is hooked to the wall mounting plate and secured with stainless steel screws provided. Field splices are made at the opening in the cover plate. Cover is finished to match arm and fixture color. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. LISTINGS AND RATINGS ETL to UL Standards 1598 & 87501 CE 1

25° C Ambient

Suitable for wet locations Kim Lighting reserves the right to change specifications without notice.

CC21A Photometry

Type III - 120 LED

2 3 2

-2

-1 HO

0 .2

1 2

KL02385 20 Feet

Light Dist. Type

Type III

BACK LIGHT 1386 lm. 20.8%

100°

BVH 90° = 1.0%

FH 80° = 38.7%

FM 60° = 32.7%

BM 60° = 8.6%

Total Flux System Watts

BL 30° = 1.8%

6680 Lm.

FORWARD LIGHT 5294 lm. 79.2% FVH 90° = 3.2%

BH 80° = 9.3%

LM-79-2008 Test Results Report Number

Mounting Height

UP LIGHT 0 lm. 0% 180°

FL 30° = 4.7%

134.5W

0°

Type V - 120 LED 4 3

2 US

1 UH

0 .1

1 2 2

LM-79-2008 Test Results Report Number

ITL67707

Mounting Height

20 Feet

Light Dist. Type Total Flux System Watts

UP LIGHT 0 lm. 0% 180°

BACK LIGHT 3198 lm. 49.5%

100°

BVH 90° = 1.0%

100°

FORWARD LIGHT 3263 lm. 50.5% FVH 90° = 1.1%

BH 80° = 19.5%

FH 80° = 20.5%

FM 60° = 23.7%

BM 60° = 23.7%

Type V 6461 Lm. 124.8W

Log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library. For custom optics and color temperature configurations, contact factory.

BL 30° = 5.3%

FL 30° = 5.2%

0°

www.kimlighting.comKIM | KIM LIGHTING 37 LIGHTING 1Lenis eumsan esent lutat lam

WALL DIRECTOR

TYPE II

38 KIM LIGHTING | www.kimlighting.com

TYPE III

TYPE IV

UNIQUE FEATURES: o

Up and Down Mounting Orientations

Unique 10° Field Adjustable Feature

0-10V Dimming Interface Standard

IP66 Rated

Wall Director LED Upgradeable EmitterDeck

Wall Director LED ®

The Wall Director LED provides an innovative solution to the challenge of lighting ground surfaces, canopies, ceilings, and architectural features from a wall mounted luminaire. Every aspect of its form expresses the functional qualities engineered into the design. Its flowing lines extend from the wall like a sconce, while simple geometry complements the architectural surface. Combined with performance optics, full cutoff (down position only), adjustability and invertible mounting, Wall Director LED embodies the ultimate architectural wall luminaire. Wall Director LED comes in two sizes and is compatible with many dimming systems. This is LED wall mount lighting perfection.This is Kim Lighting.

WALL DIRECTOR was recognized by the IESNA for being the first wall mount luminaire to employ MicroEmitter technology.

RELATED PRODUCTS:

Structural LED

The Archetype LED

CFL LED

www.kimlighting.com | KIM LIGHTING 39

Wall Director LED ®

Ordering Example:

WD14-D3 / 60L5K120 / BL / A-30 1

1 Fixture Catalog no. designates fixture and light distribution.

4-11 Light Distribution

WD14 HOUSING WD14 = Small 60 LEDs WD18 = Large 120 LEDs

2 = Type II 3 = Type III 4 = Type IV

DISTRIBUTION U = Up D = Down

Type II

Type III

Type IV

2 Electrical Module SOURCE 60L = 60 LEDs, WD14 120L = 120 LEDs, WD18 COLOR TEMPERATURE 1 3K = 3500K 5K = 5100K 2K = 580nm Amber 1

3 Finish Super TGIC powder coat paint over titanated zirconium conversion coating.

VOLTAGE 120 = 120V 208 = 208V 240 = 240V 277 = 277V 347 = 347V2 480 = 480V2

Due to current unavailability of 347V and 480V drivers, specification of these voltages may feature an integral step-down transformer. For WD14 only.

4300K and 6500K are also available on an “Engineered to Order” basis

Color: Stealth Gray Light Gray Platinum Silver White Cat. No.: SG LG PS WH

Black BL

Dark Bronze Custom Colors Consult your Kim Lighting representative DB CC for custom colors.

Factory installed inside housing with fully gasketed sensor on side wall..

4 Optional Photocell Control:

Line Volts: Cat. No.:

120V A-30

208V A-31

240V A-32

277V A-33

480V A-34

347V A-35

Photocell Control

Cat. No.: for WD14Cat. No.: for WD18

5 5° Shield

5° Shield

KIM LIGHTING 10 | www.kimlighting.com 40 KIM LIGHTING

Aluminum shield field-attached to lens frame. Maintains a horizontal cutoff fixture edge when the luminaire is tilted 5°. Finished to match the fixture.

Ordering Information 7 Lexan® Enclosure:

Clear flat Lexan® lens enclosure with gasket replaces standard tempered glass lens.

Cat. No.: LS

NOTE: Use only when vandalism is anticipated to be high. Useful life is limited by UV discoloration from sunlight. A program of regular inspection and periodic replacement is highly recommended to maintain optimum fixture performance.

Lexan® lens

8 Lexan® Enclosure:

Cat. No.: SDS14 for WD14 Cat. No.: SDS18 for WD18

11 ga. (.12" dia.) BB Wire, (.75" sq. welded mesh pattern,) WG14 is 11C" x 10J" x 1K" deep. WG18 is 15" x 14K" x 1K" deep. Finish is super TGIC thermoset polyester powder coat paint, over zinc plated wireform. Finished to mach the fixture. NOTE: Only available with flat lens applications.

9 Optional Fusing:

High temperature fuse holders factory installed inside the fixture housing. Fuse is included. Line Volts: Cat. No.:

Single Fuse

Dimming Controls: Contact factory for further details and current capabilities.

120V SF

208V DF

240V DF

277V SF

347V SF

480V DF

Wall Director LED driver features a 0-10V dimming interface on the LifeShield® device, allowing 0-100% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting is working

with several control system manufacturers to develop a variety of proven turnkey solutions to meet any application’s need. Kim Lighting will advise availability of complete control packages, and even two-way monitoring systems, once they have been tested and exceed Kim’s high quality standards.

Surface Conduit Mount

Cat. No.: SCM14U Cat. No.: SCM14D Cat. No.: SCM18

7G" (188.9 mm)

1L"

8O" 1K"

SCM14U for UP fixtures only. SCM14D for DOWN fixtures only. 11H" SCM18 for all fixtures UP and DOWN.

(224.3 mm)

(38.1 mm)

8O"

(44.5 mm)

Cast aluminum junction box and fixture mount for attachment (by others) to existing walls, beams or columns. SCM14 has one L" NPT conduit tap in each side and bottom. SCM18 has one L" NPT conduit tap in each side, top and bottom. Must be securely mounted to wall surface. Finished to match the fixture.

(296.9 mm)

(224.3 mm)

Note: Must be securely mounted to all surface 2O" (72.1 mm)

5" (127.0 mm)

WD14

Lexan is a registered trademark owned by GE Advanced Materials

WD18

KIMLIGHTING LIGHTING 11 www.kimlighting.com | KIM 41

Specifications WD14 Small LED 60 LEDs Maximum Weight: 26 lbs. Maximum System Watts =73W

WD18 Large LED 120 LEDs Maximum Weight: 43 lbs. Maximum System Watts = 140 W

13" (330 mm)

17" (432 mm)

TOP TOP 8L"

7C" (187 mm)

(222 mm)

8E"

6F"

(225 mm)

(157 mm)

11L" (299 mm)

8J"

14D"

(210 mm)

(372 mm)

FRONT 18" (457 mm)

FRONT

4L"DIA. Bolt Circle

7K" (191 mm)

6L" (172 mm)

5J" (133 mm)

3K" DIA. Bolt Circle Mounting Plate Attaches directly to any standard 4" J-box (by others)

4K" (114 mm) To J-box center SIDE

REFLECTOR HOUSING: One-piece die-cast, low copper (<0.6% Cu) aluminum alloy with integral cooling fins. Rotates against ballast housing to provide 10° of adjustment with degree markers cast into the housing. At 0° adjustment, lens is totally concealed from view above horizontal with fixture aimed downward. LENS FRAME: One-piece die-cast, low copper (<0.6% Cu) aluminum alloy with integral hinges and stainless steel pins. Two stainless steel screws secure lens frame to reflector housing with sealing provided by a one-piece extruded and vulcanized silicone gasket for WD18, and tool-less entry to reflector housing for the WD14. Lens is clear flat thick tempered glass sealed to lens frame with a silicone gasket and retainer clips. For up models, lens is mounted flush with frame for water run off, and is silicone sealed. ELECTRONIC MODULE: All eclectrical components are UL reognized, mounted on a single plate and factory prewired with quick disconnect plugs. Modules include a driver, thermal control device and surge protector. Drivers are rated for -40° starting and features a 0-10V dimming interface on the LifeShield® device. OPTICAL MODULE: Precision, replaceable MicroEmitters are positioned to achieve directional control toward desired task. The entire EmitterDeck fastens to the housing as a one-piece module.

7L"

6K"

(197 mm)

(165 mm)

5H" (145 mm)

Mounting Plate must be securely attached to wall outside the J-box perimeter.

6B" (156 mm) to J-box center SIDE

ELECTRICAL COMPONENTS: High power factor ballasts are rigidly mounted inside the housing and are factory prewired with a quickdisconnect plug for mating to the EmitterDeck. MOUNTING PLATE: For WD14 the mounting plate attaches directly to any standard 4” junction box. For WD18 the standard mounting plate is attached to wall (by others) outside the junction box perimeter. All mounting plates are die-cast aluminum with reinforced ribs. Two studs are provided in each plate with flange nuts to allow fixture mounting by keyhole slots. Sealant must be applied (by others) between mounting plate and mounting surface to insure a dry junction box. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. LISTINGS AND RATINGS ETL listed to UL 1598 standards1 1

IP66 Rated

25°C Ambient

Suitable for wet locations Kim Lighting reserves the right to change specifications without notice.

42 KIM LIGHTING | www.kimlighting.com

Photometry Report Number

KL02049

Light Dist. Type

Type 1I

Mounting Height

18 Feet

Lamp Temperature

Max. Candela Plot

WD18E2/L5K

3721 Candela at 67.5° Vertical. 75.0° Horizontal

180° 150°

150°

120°

120 LED

120°

5100K

.2 .1

Total Flux System Watts

5916

90°

140

1200

60° Vertical Plane

60° 2400

Horizontal Cone

3600 30°

30° 0°

WD18E3/L5K Report Number

KL02050

Light Dist. Type

Type 1II

Mounting Height

18 Feet

Max. Candela Plot

3972 Candela at 67.5° Vertical. 65.0° Horizontal 2

180° 150°

150°

1 120°

Lamp Temperature Total Flux System Watts

120°

120 LED

6241

5100K

.5 90°

90°

140

1300

60° Vertical Plane

60°

2600 Horizontal Cone 3900 30°

30° 0°

WD18E4/L5K Report Number

KL02051

Light Dist. Type

Type 1V

Mounting Height

18 Feet

Lamp Temperature Total Flux

Max. Candela Plot 2 180° 150°

150°

120 LED

120°

5100K 5894

90°

System Watts

140 2100

60° Vertical Plane

60° 4200

6300 30°

UP LIGHT 0 lm. 0% 180°

30° 0°

Horizontal Cone

DARK-SKY COMPLIANCE Wall Director LED standard luminaires in the down position meet requirements for applications where light pollution may be a concern. When no tilt option is applied, the Wall Director LED’s standard optical system and flat lens produces zero light above 90°. Log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library. For custom optics and color temperature configurations, contact factory.

BACK LIGHT 338 lm. 5.7%

100°

BVH 90° = 0.2%

BH 80° = 1.4%

BM 60° = 2.8%

BL 30° = 1.3%

100°

FORWARD LIGHT 5556 lm. 94.3% FVH 90° = 1.7%

FH 80° = 41.4%

FM 60° = 42.6%

FL 30° = 8.6%

www.kimlighting.com | KIM LIGHTING 43

KIM LIGHTING HONORED WITH SSL PRODUCT INNOVATIONS AWARDS (PIA) Kim's PGL7 LED received a Platinum Award in the Application category of “best renovation/retrofit using solid state lighting."

TYPE I * *

TYPE I *

AVAILABLE IN NARROW OR WIDE DISTRIBUTION.

44 KIM LIGHTING | www.kimlighting.com

TYPE III *

TYPE V *

ONE-WAY RIGHT *

ONE-WAY LEFT *

UNIQUE FEATURES: o

Smart Control System Options

Fourteen Optical Distribution Patterns for One Housing

Upgradeable EmitterDeck™

0-10V Dimming Interface Standard

North Park Parking Garage - Auburn, AL

PGL7 LED

RELATED PRODUCTS:

Now is the time for PGL7 LED, the newest innovation in parking garage and low level mounting luminaires from Kim Lighting. More than ever, designers are challenged with meeting energy codes and providing safety and security illumination. The answer is PGL7 LED.

WARP9 LED

PGL7 LED is the modern, multi-distribution solid-state luminaire that allows light to be directed where it is needed, thus meeting and exceeding standard application requirements. With Kim Lighting’s PGL7 LED, the future of parking garage and low mounting height solutions has arrived. Structural LED

This is parking structure lighting perfection. This is Kim Lighting.

PGL7 LED was recognized by the IESNA for being the first parkingg garage luminaire to employ MicroEmitter technology.

PGL7 LED was rewarded the New Product winner at MCEE trade show in Montreal ®

Wall Director LED

www.kimlighting.com | KIM LIGHTING 45

Ordering Information Ordering Example:

1 Fixture Catalog No. designates PGL LED fixture with Wide or Narrow optical distribution. Wide

= 70° peak intensity angle Narrow = 57.5° peak intensity angle

PGL71W / 60L3K120 / PS / PB2 1

PGL71W Wide DOWN LIGHT

4-10

PGL71N Narrow DOWN LIGHT

Driving Direction

Type V Square

PGL72W Wide DOWN LIGHT

PGL72N Narrow

Driving Direction

Type I

PGL74W Wide DOWN LIGHT

DOWN LIGHT

Driving Direction

PGL74N Narrow

Driving Direction

PGL73N Narrow

DOWN LIGHT

Driving Direction

PGL73W Wide

Driving Direction

PGL75W Wide

Driving Direction

PGL75N Narrow

DOWN LIGHT

Driving Direction

DOWN LIGHT

Driving Direction

Type III

PGL76W Wide DOWN LIGHT

PGL76N Narrow DOWN LIGHT

Driving Direction

Source indicates the amount of light emitting diodes

Driving Direction

60L

Driving Direction

Cat. No.:

Platinum Silver (standard) PS

4 Optional Lexan Refractor Lens:

VOLTAGE 120 = 120V 208 = 208V 240 = 240V 277 = 277V 347 = 347V 480 = 480V

White

Custom Colors

Cat. No.:

Lexan Refractor

46 KIM LIGHTING | www.kimlighting.com

Driving Direction

120

SOURCE 60L = 60 LED's

Color:

Platinum Silver shall be a Powdura TGIC powder coat paint. All other colors shall be a Super TGIC powder coat paint.

DOWN LIGHT

Type R - One -Way Right

COLOR TEMPERATURE 1 3K = 3500K 5K = 5100K 2K = 580nm amber

3 Finish

PGL77N Narrow

DOWN LIGHT

Type L - One -Way Left

Electrical Module

PGL77W Wide

4300K and 6500K are also available on an ”Engineered to Order” basis

Consult your Kim Lighting Representative for custom colors.

Injection molded UV stabilized Lexan has the same prism design as the standard acrylic. The Lexan refractor lens decreases the luminaire efficiency, and has a different index of refraction than the acrylic material. As a result, moderately altering beam angles and candela.

Cat. No.:

5 Tamper-Resistant Latches:

Stainless steel captive hex socket (Allen) shoulder screws secure latches in locked position.

Tamper-Resistant Latch

High temperature fuse holders factory installed inside the fixture housing. Fuse is included.

6 Fusing: Single Fuse

Line Volts: Cat. No.:

Cat. No.:

Trunnion Mount

10 Smart Control Systems: Contact Kim Lighting Technical Support for technical information and installations.

240V DF

277V SF

347V SF

480V DF

PB2PS

PB2WH

PB2CC

Platinum Silver

White

Custom Color

One-piece cast aluminum fixture mount utilizes the standard Kim speed mount for fixture attachment, and also serves as a junction box for field wire connections. Top of fixture mount casting has K" NPT to receive conduit from ceiling J-box. (Ceiling J-box and conduit to fixture by others.) Upper trunnion section is 1K" aluminum bar with adjustable mounting positions in 1" increments. Suspends fixture from 8K" to 13K" below the ceiling, as measured to the fixture top. Finished to match fixture electrical housing. Cat. No.:

9 Perimeter Shield Lens:

208V DF

Die-Cast aluminum, finished to match the fixture electrical housing. Offset L" NPT pendant entry to balance fixture in free-swinging installation. The Kim Speed Mount is furnished for fixture attachment to the PB2. This option is shipped separate from fixture.

7 Balanced Pendant J-Box and Bird Shroud:

8 Trunnion Mount:

120V SF

Cat. No.: PSL

TB2PS

TB2WH

TB2CC

Platinum Silver

White

Custom Color

The lens rim can be shielded 180Âş to reduce uplight or light trespass illumination by employing a high heat color spray around the house side portion of the lens. NOTE: PGL74W, PGL74N and PGL75W, PGL75N only.

SC1 - Provides the most economical low voltage method of switching lighting levels based on occupancy within a space. SC1 is equipped with a relay and fixed resistor to allow 50% dimming; PGL7 driver is a 0-10V dimming interface. Wire leads extending out the top of the luminaire for twisted pair wiring connection to the occupancy sensor. The occupancy sensor device is a remote install, typically mounted to a j-box. Wire leads exiting the luminaire distance is 8". Junction box and occupancy sensor by others. SC22 - The occupancy sensor device and aluminum enclosure is factory installed onto the electrical housing. SC2 is equipped with a Power Pack, Fixed Resistor and Occupancy Sensor to allow 50% dimming; PGL7 driver is a 0-10V dimming interface. Wire leads extending out the top of the luminaire for twisted pair wiring connection to the occupancy sensor. For master SC2 relay communication, a set of secondary detection wiring extends out the top of the luminaire for satellite relaying, up to 10 units. Occupancy Sensor provided.

SC2 and SC4 occupancy sensor is a product of Hubbell Building Automation, a division of Hubbell Lighting Inc. SC3 and SC4 wireless components are third party products, and will carry the manufacturerâ&#x20AC;&#x2122;s technical support service and warranty policy.

SC33 - Provides an advanced method of switching lighting levels based on occupancy within a space. SC3 is equipped with a Control Module and an Antenna to provide 0-100% dimming; PGL7 driver is a 0-10V dimming interface. An RF relay device is included in the luminaire for wireless communication (by others). For master relaying from occupancy control, connection is twisted pair wiring. The SC3 occupancy sensor can provide satellite relaying up to 300' maximum distance. Wire leads exiting the luminaire distance is 8". Junction box, control panel and occupancy sensor by others. Base station required. SC43 - Provides an advanced method of switching lighting levels based on occupancy within a space. The occupancy sensor device and aluminum enclosure is factory installed onto the electrical housing. SC4 is equipped with a Control Module, Power Pack and an Antenna to provide 0-100% dimming; PGL7 driver is a 0-10V dimming interface. An RF relay device is included in the luminaire for wireless communication. The SC4 can provide satellite relaying up to 300' maximum distance. Occupancy Sensor provided. Control panel by others. Base station required.

www.kimlighting.com | KIM LIGHTING 47

Specifications PGL7 LED 60 Light Emitting Diodes Total Max System Watts = 73W Standard Acrylic Refractor 18" DIA. (457 mm)

(102 mm)

7K"

3K"

(191 mm)

(89 mm)

Balanced Pendant J-Box and Bird Shroud 10" DIA. (254 mm)

4J"

(108 mm)

8J"

(210 mm)

11L"

(299 mm)

Trunnion Mount

OPTIONAL BALANCED PENDANT J-BOX AND BIRD SHROUD (PB2) Pendant installations pose two problems that are solved by this option. First, the luminaire must be balanced to hang straight. Second, the luminaire top should not provide a place for birds to nest. Constructed of die-cast aluminum, the PB2 utilizes the Kim speed mount for rapid fixture mounting and provides an aesthetic and functional solution for pendant installations.

10L" DIA. (273 mm)

8K" to 13K" (216 mm to 343 mm) Adjustable Mounting Position

Smart Control System (SC2, SC4)

3G"

(87 mm)

(127mm)

Specifications SPEED MOUNT Electro-zinc plated steel for mounting to standard 4" junction box or mud-box. Fixture hangs from hooks to free both hands to make field wire connections. Allows tool-free fixture mounting to junction box, with integral anti-theft lock.

DRIVER: All electrical components are UL recognized and mounted directly to the electrical housing for maximum heat dissipation. A step-down transformer within the housing may be used for 347V and 480V systems.

ELECTRICAL HOUSING: Die-cast, low copper (<0.6% Cu) aluminum alloy for direct mounting to the Kim Speed Mount. Wire entries are sealed by a silicone grommet. Integral latches (2) are die-cast aluminum with stainless steel springs and stainless steel hangers for the refractor.

SENSOR (SC2, SC4): The occupancy sensor device and enclosure is factory installed onto the electrical housing. The occupancy sensor (Model No. OMN11RLRP) is a product of Hubbell Building Automation, an affiliate of Hubbell Lighting Inc., and is UL and cUL listed with a 5-year warranty.

REFRACTOR: Standard refractor is one-piece injection molded acrylic, .125" minimum wall thickness. Optional refractor is one-piece injection molded UV stabilized Lexan, .125" minimum wall thickness. The prisms around the perimeter refract the spill light off the MicroEmitters upward to eliminate the cave effect. Refractor attaches to electrical housing with (2) no-tool quick release latches, with one latch captive as a hinge. Perimeter is fully sealed with a one-piece extruded silicone gasket, with the ends fused together to form a continuous piece, sealing the refractor to the electrical housing, and providing an IP66 fixture rating.

FINISH: Standard finish on fixture electrical housing, optional PB2 and TB2, is (PS) Platinum Silver. Platinum Silver shall be a Powdura TGIC powder coat paint. All other colors shall be a Super TGIC powder coat paint. Optional white (WH) and custom colors available.

EMITTER DECK: Precision injection molded, high specular reflectors are positioned to achieve directional control toward desired task. The entire assembly fastens to the housing as a one-piece module and features wiring quick-disconnects for easy upgrading.

48 KIM LIGHTING | www.kimlighting.com

ÂŽ

CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. LISTINGS AND RATINGS ETL listed to UL 1598 standards1 1

IP66 Rated

40Â°C Ambient

Suitable for wet locations Kim Lighting reserves the right to change specifications without notice.

Photometry PGL71W/L5K Report Number Light Dist. Type Mounting Height Lamp Temperature Total Flux

KL02001

Max. Candela Plot 1895 Candela at 72.5° Vertical. 46.5° Horizontal 180°

Wide, Type V

150°

Horizontal Cone

8 Feet

E 120°

60 LED

120°

5100K

4131

Efficacy

73W

E F

630

60°

57 lm/W

Vertical Plane

System Watts

S 90°

Bay Width

60°

1260

1890 30°

30° 0°

PGL71W - Single Row

Bay Width

Mounting Height

50' H – not to scale

55'

RoHS/WEEE Compliant

Mounting Height Lamp Temperature

Uniformity Avg./Min.

Max./Min.

1.60

3.05

5.40

2.40

1.20

1.00

2.18

3.11

5.57

3.70

1.90

1.80

2.94

2.45

4.25

3.40

2.20

1.40

1.20

2.05

2.56

4.38

4.70

3.80

1.30

2.82

3.53

6.75

3.40

3.10

2.40

0.90

0.80

1.87

4.68

9.50

3.40

4.60

3.60

1.50

2.72

4.80

3.00 3.20 2.20 1.10 1.00 1.94 2.77 Made from +90% Recycled Materials

4.71

20'

5.40

3.90

5.20

4.00

30'

3.90

3.50

3.40

20'

3.80

3.40

5.10

30'

3.40

3.00

20'

5.40

3.90

30'

3.80

20'

4.80

30'

3.30

Horizontal Footcandles on Deck B C D E

1537 Candela at 57.5.0° Vertical. 46° Horizontal

KL01736

180° 150°

Light Dist. Type

Maintained Avg./fc

Max. Candela Plot

PGL71N/L5K Report Number

Spacing S

150°

Nar., Type V

8 Feet

120°

Horizontal Cone

C D

120°

60 LED

A B

5100K

90°

F E

Total Flux System Watts Efficacy

4221

Bay Width

510 Vertical Plane

73W

60°

60° 1020

58 lm/W 1530 30°

30° 0°

PGL71N - Single Row

Bay WidthH

50'

Mounting Height

Maintained Avg./fc

Uniformity Avg./Min.

Max./Min.

1.30

2.82

3.53

6.75

.90

.80

1.87

4.68

9.50

1.50

2.72

4.80

1.10

1.00

1.94

2.77

4.71

1.10

1.20

3.20

4.00

9.25

3.30

.80

2.18

3.63

7.67

5.10

4.30

1.40

1.10

3.14

3.49

6.89

2.90

3.10

1.00

2.15

3.07

6.43

Spacing S

Horizontal Footcandles on Deck B C D E

20'

5.40

3.90

4.70

3.80

30'

3.80

3.40

3.10

2.40

20'

4.80

3.40

4.60

3.60

30'

3.30

3.00

3.20

2.20

20'

4.90

7.40

4.70

4.50

30'

3.10

4.60

2.70

20'

4.60

6.20

30'

2.70

4.50

1.30

H – not to scale

55'

For complete photometric results on all standard PGL7 LED offerings, log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library. For custom optical and color temperature configurations, contact factory.

www.kimlighting.com | KIM LIGHTING 49

Additional Kim Lighting Premium LED Families

WARP9® LED

Structural LED

The Archetype® LED

Era® LED

Era® Bell/Era® Acorn LED

SITE / ROADWAY

Curvilinear LED

Wall Director® LED

PGL7 LED

SITE / ROADWAY

WALL MOUNT

PARKING STRUCTURE

LED Compact Floodlight

LED Landscape Collection

Standard LED Limited Warranty When properly installed and under normal conditions of use, Kim Lighting warrants MicroEmitter LED products (“Product(s)”) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of five (5) years for metal parts, (ii) a period of ten (10) years for exterior housing paint finish(s), (iii) a period of six (6) years for LED Light Engines (MicroEmitters) and, (iv) a period of five (5) years for LED power components (LED Driver, LifeShield Device, Surge Protector), from the date of sale of such goods to the buyer as specified in Kim Lighting shipment documents for each Product(s). Occupancy sensors, LED drivers, dimmers and relay wiring components are covered by the manufacturer’s warranty. The buyer agrees to make all claims regarding defects or deficiencies in the Product(s) according to the terms of Kim Lighting’s official warranty. Warranty claims must be made in writing according to Kim Lighting procedures existing at the time of the claim.Valid warranty claims must be made within the warranty period specified herein above, and submitted within thirty (30) days of discovery of the damage or defect. No FIELD labor, repair, DISMANTLE, or installation charges are included with this warranty. Kim Lighting may repair or replace any Product(s) covered by this warranty at its sole discretion and in accordance with its procedure. Any unauthorized return, repair, replacement or modification of the Product(s) shall avoid this warranty. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim Lighting’s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations.

www.kimlighting.com

MAILING ADDRESS P.O. BOX 60080 CITY OF INDUSTRY, CA 91716-0080

BUSINESS ADDRESS 16555 EAST GALE AVENUE CITY OF INDUSTRY, CA 91745 PHONE: 626.968.5666 FAX: 626.369.2695

Printed in U.S.A. Version 2.1 (9/11)

PATENT PENDING BECAUSE OF CONTINUING PRODUCT IMPROVEMENT PROGRAMS, KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. ENTIRE CONTENTS © COPYRIGHT 2011 KIM LIGHTING INC. ALL RIGHTS RESERVED REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION IS STRICTLY PROHIBITED.