I N F I N I T Y® K A P P A® S P E A K E R S Looking for a more moving audio experience? Take Infinity® car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition’s. So expect extreme output from us. But be prepared for accuracy and detail that may surprise you. The Kappa line of premium loudspeakers – which incorporates the very best in high-end design and proven technology – has long been one of the world’s most recognized and admired.
multielements New Kappa loudspeakers take car audio speaker technology to a whole new level with features such as Plus One® (patent pending) cones; true-four-ohm topology; UniPivot™ (patent no. 6,002,780) edge-driven tweeters; and industry-leading mounting systems, including Intermount III (patent no. 6,505,705) and I-Mount™ (patent no. 5,859,917), and the Starfish™ tweeter-mounting adapter. With all this technology in a single speaker series, it’s no wonder our competitors are scrambling to keep up. For years, the design of upscale car audio speakers has been loosely based on the design of at-home speaker systems, where amplifiers are big and power is plentiful. The audio systems in new cars are different. Almost all new systems include two-ohm speakers and small, efficient amplifiers or head units designed to drive them. Replacing those two-ohm factory speakers with four-ohm models cuts the available power in half, and that’s no upgrade. Kappa speakers are optimized for these new systems and work beautifully with old-school aftermarket gear, too.
3 2 . 9 cf
42.9i
52.9i
62.9i
3-1/2" Two-Way Loudspeaker Plus One® (patent pending) woven-glass-fiber woofer cone
4" Two-Way Loudspeaker
5-1/4" Two-Way Loudspeaker
6-1/2" Two-Way Loudspeaker
Plus One (patent pending) woven-glass-fiber woofer cone
Plus One (patent pending) woven-glass-fiber woofer cone
Plus One® (patent pending) woven-glass-fiber woofer cone
MMD®-dome tweeter
Edge-driven MMD®-dome tweeter
True 4-ohm
True 4-ohm
Edge-driven MMD®-dome tweeter with UniPivot™ (patent no. 6,002,780)
Edge-driven MMD®-dome tweeter with UniPivot™ (patent no. 6,002,780)
Direct-connect crossover dongle
®
®
Direct-connect crossover dongle
True 4-ohm
True 4-ohm
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Direct-connect crossover dongle
Direct-connect crossover dongle
Sensitivity: 92dB
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Tweeter-level adjustment on tweeter
Frequency response: 85Hz – 25kHz
Sensitivity: 93dB
Impedance: 2 ohms
Power handling, RMS: 35 watts
Frequency response: 75Hz – 25kHz
Sensitivity: 94dB
Intermount III (patent no. 6,505,705) woofer mounting system
Power handling, Peak: 105 watts
Power handling, RMS: 50 watts
Frequency response: 55Hz – 25kHz
Impedance: 2 ohms
Power handling, Peak: 150 watts
Power handling, RMS: 55 watts
Sensitivity: 95dB
Power handling, Peak: 165 watts
Frequency response: 45Hz – 25kHz Power handling, RMS: 75 watts Power handling, Peak: 225 watts
multielements
62.9is
63.9i
652.9i
6-1/2" Two-Way Shallow Mount Loudspeaker
6-1/2" Three-Way Loudspeaker
165mm Two-Way Loudspeaker
Plus One (patent pending) woven-glass-fiber woofer cone
Plus One® (patent pending) woven-glass-fiber woofer cone
MMD®-dome midrange and UHF tweeter
Plus One® (patent pending) woven-glass-fiber woofer cone
®
Edge-driven MMD®-dome tweeter
Direct-connect crossover dongle
Edge-driven MMD®-dome tweeter with UniPivot™ (patent no. 6,002,780)
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Intermount III (patent no. 6,505,705) woofer mounting system
Sensitivity: 95dB
Impedance: 2 ohms
Frequency response: 45Hz – 30kHz
Sensitivity: 95dB
Power handling, RMS: 75 watts
Frequency response: 45Hz – 25kHz
Power handling, Peak: 225 watts
Power handling, RMS: 75 watts
Impedance: 2 ohms Sensitivity: 94dB Frequency response: 45Hz – 25kHz
Power handling, Peak: 225 watts
Power handling, RMS: 65 watts Power handling, Peak: 195 watts
Installation of Kappa speakers is easy, thanks to a new crossover dongle, that is permanently connected to the speaker’s terminals at the factory. No special tools or U N I PI V OT
connectors are required to connect standard Kappa speakers to the car’s wiring. Additionally, Kappa speakers
TO ENSURE PROPER IMAGING
include frames designed to fit most factory speaker locations without modification. Kappa Series Speakers also include Plus One cone
TWEETER LEVEL CONTROL
technology, which delivers a cone with more surface area than competing models of the same size. This increase can be as much as 30%, depending on the individual speaker model. The benefit is increased bass output and increased efficiency.
multielements
692.9i
693.9i
4 6 2 . 9 cf p
6 8 2 . 9 cf
6" x 9" Two-Way Loudspeaker
6" x 9" Three-Way Loudspeaker
4" x 6" Two-Way Plate Loudspeaker
6" x 8"/5" x 7" Two-Way Loudspeaker
Plus One® (patent pending) woven-glass-fiber woofer cone
Plus One® (patent pending) woven-glass-fiber woofer cone
Plus One® (patent pending) woven-glass-fiber woofer cone
Plus One® (patent pending) woven-glass-fiber woofer cone
Edge-driven MMD®-dome tweeter with UniPivot™ (patent no. 6,002,780)
MMD®-dome midrange and UHF tweeter
Edge-driven MMD®-dome tweeter
Direct-connect crossover dongle
Direct-connect crossover dongle
Edge-driven MMD®-dome tweeter with UniPivot™ (patent no. 6,002,780)
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Tweeter-level adjustment on tweeter
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Impedance: 2 ohms
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Impedance: 2 ohms
Sensitivity: 96dB
Sensitivity: 94dB
Impedance: 2 ohms
Sensitivity: 96dB
Frequency response: 35Hz – 30kHz
Frequency response: 75Hz – 25kHz
Sensitivity: 94dB
Frequency response: 35Hz – 25kHz
Power handling, RMS: 110 watts
Power handling, RMS: 60 watts
Frequency response: 40Hz – 25kHz
Power handling, RMS: 110 watts
Power handling, Peak: 330 watts
Power handling, Peak: 180 watts
Power handling, RMS: 100 watts
Power handling, Peak: 330 watts
Power handling, Peak: 300 watts
All Kappa Series speakers are “true
Other features – An ultra-wideband
four-ohm” – they include reduced
UHF soft-dome tweeter is used on the
voice-coil impedance designed to
component systems for accurate music
extract the most power possible from
reproduction from 25kHz up to 35kHz.
all amplifiers engineered to drive loads of four ohms or less. Many factory-installed systems incorporate two-ohm speakers and include amplifiers designed to drive those loads. Replacing those reducedimpedance speakers with four-ohm models is hardly an upgrade, since the power output from the amplifier will be reduced. True-four-ohm addresses this as well.
Edge-driven-MMD® dome tweeters are used. These are not commonly used W-domes, but fully edge-driven-dome tweeters like those found in better home-audio speakers. The benefit is increased power handling and reduced distortion at high output levels. A new ceramic woofer motor with a much longer voice coil for drastically reduced distortion at high listening levels (up to 15dB less!) is used. This results in a much tighter and better sounding bass.
component
systems
5 0 . 9 cs
6 0 . 9 cs
6 8 0 . 9 cs
10 . 9 t
5-1/4" Two-Way Component System
6-1/2" Two-Way Component System
6" x 8"/5" x 7" Two-Way Component System
1" Textile Tweeter
Plus One® (patent pending) woven-glass-fiber woofer cone
Plus One® (patent pending) woven-glass-fiber woofer cone
Plus One® (patent pending) woven-glass-fiber woofer cone
I-Mount™ (patent no. 5,859,917) tweeter kit with Starfish™ OEM adapter
Edge-driven MMD®-dome tweeter
Edge-driven MMD®-dome tweeter
Edge-driven MMD®-dome tweeter
Outboard passive crossover with air core inductors and poly caps
Outboard passive crossover with air core inductors and poly caps
Outboard passive crossover with air core inductors and poly caps
Outboard passive crossover with air core inductors and poly caps
I-Mount™ (patent no. 5,859,917) tweeter kit with Starfish™ OEM adapter
I-Mount™ (patent no. 5,859,917) tweeter kit with Starfish™ OEM adapter
I-Mount™ (patent no. 5,859,917) tweeter kit with Starfish™ OEM adapter
Tweeter-level adjustment
Tweeter-level adjustment
Impedance: 2 ohms
Intermount III (patent no. 6,505,705) woofer-mounting system
Sensitivity: 93dB
Tweeter-level adjustment
Sensitivity: 93dB
Frequency response: 55Hz – 25kHz
Impedance: 2 ohms
Frequency response: 45Hz – 25kHz
Power handling, RMS: 85 watts
Sensitivity: 95dB
Power handling, RMS: 90 watts
Power handling, Peak: 255 watts
Frequency response: 45Hz – 25kHz
Power handling, Peak: 270 watts
Impedance: 2 ohms
Edge-driven motor structure
Impedance: 2 ohms Sensitivity: 93dB Frequency response: 2.5Hz – 25kHz Power handling, RMS: 50 watts Power handling, Peak: 150 watts with supplied crossover
Power handling, RMS: 90 watts Power handling, Peak: 270 watts
250 Crossways 250 Crossways Park Park DriveDrive Woodbury, Woodbury, NY 11797 NY 11797 USA USA 516.674.4INF 516.674.4INF (4463) (4463) Fax 516.682.3556 Fax 516.682.3556 www.infinitysystems.com www.infinitysystems.com
© 2008 © Harman 2008 Harman International International Industries, Industries, Incorporated. Incorporated. Infinity, Infinity, Kappa Kappa, Series, Plus Plus One, One, MMD and and MMDCMMD are trademarks are trademarks All rights All rights reserved. reserved. Part No. Part INFBASSLINKPI3-08 No. INFKAPPASPKPI3-08 of Harman of Harman International International Industries, Industries, Incorporated, Incorporated, registered Features, Features, specifications specifications and appearance and appearance are subject are subject to change to changein theregistered United States in the and/or United other States countries. and/or other T-Pole countries. Motor, without without notice. notice. Designed, Designed, editededited and digitally and digitally produced produced by theby the I-Mount, I-Mount, SLI, UniPivot, UniPivotEMIT, and Starfish, Starfish BassLink are trademarks T and of Harman Harman Consumer Consumer GroupGroup Marketing Marketing & Design & Design Center, Center, Woodbury, Woodbury, NY. NY. MultiMount Harman areInternational trademarks of Industries, Harman International Incorporated. Industries, Incorporated.