In order to deliver such extraordinarily high power, the power supply stage features 8 toroidal transformers, 28 - 3300 uF 105° Low ESR primary capacitors for a total of 92400 uF; 32 - 160 A TO247 Mosfets and 22 - 820 uF secondary capacitors capable of 200 V.
Direct CurrentÂŽ, 4 - 1/0 AWG cables terminated with ring terminals on the supply side and secured to the amplifier with 4 - 2,5 mm thick copper buss bars connected directly to the printed circuit board, providing the ability to transfer power between battery and amplifier with very low contact resistance.
The output stage, settable in bridged or stereo mode, features 20 - 190 A / 360 V impulsive current Mosfets: robust power and thermal dissipation without compromise.
Hertz SPL Stack SystemÂŽ stacks multiple amplifiers thanks to the 6 supplied 2 mm robust iron Brackets. The threaded mounting points on the heatsink let your SPL power plant grow without limits.
The innovative RMA (Removable Moving Assembly) provides the ability to replace the entire mobile assembly in few seconds, without removing the speaker from its mounting position, choosing the one configuration appropriate to your needs. The available mobile assemblies differ in the typology of the spiders, cone material and voice coil impedance.
Large triple magnet, for perfect control under high power, very high excursion conditions for top SPL performance.
Double Symmetrical Spiders system, it allows unprecedented control even under extreme excursions of the mobile assembly.
Aluminium voice coil wound on four layer former, for unheard of thermal and mechanical capacity.
Power transfer is carried out through screw terminals that accept high current cables to 8 AWG.
Back Vented Spider Support, for perfect symmetry under high excursion while providing increased thermal dissipation. Internally reinforced basket, protected from abrasions with high resistance paint.
Mille :: :::: ::::: : :: :::: :::: ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 04 Hi-Power :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 10 Hi-Energy ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 14 Energy-Power :::::::::::::::::::::::::::::::::::::::::::::::::::::: 20 Energy :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 24 Dieci ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 30 Space ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 34 SPL Monster / SPL Show ::::::::::::::::::::::::::::::::::::: 38
QUALITY STANDARDS In order to achieve the high quality standards of Hertz, we are not satisfied with testing a sampling of each production lot: every component withstands the most rigorous and exacting computerized quality control process, supervised by qualified technicians. ISO 9001:2000 certification guarantees maximum quality for maximum satisfaction.
TRADITION
INNOVATION
The constant evolution of our know-how enriches our most precious human resource: experience. Our deep knowledge of in-vehicle acoustics and in design and production procedures maintains the reference level of all Hertz products. Always.
The Hertz Team contributes considerably to the development and progress of hi-fidelity mobile audio. Their research and development program is cutting-edge, with continuous innovation a standard practice. V-Cone®, Tetolon Fiber®, Rotary High Frequency Contour®, Symmetrical Field Engine®… along with HP Manager ®, HP LINK 2®. The responsibility of being a leader.
HGR 250 HGR 300 HGR 380
87
1
HP MANAGERTM - Digital Management - is a microprocessor based system that monitors and controls the amplifier and audio system status showing this information through a cool blue LCD display.
3 HP IN dual input option offers wide interfacing possibilities: traditional pre-amplified RCA inputs and Speaker-In (OEM sources) through removable connectors. ARTTM function provides automatic turn on and off if a remote signal is not available.
2 D-CLASS technology, used in HP 1 D and HP 1 KD, is based on 120kHz sampling frequency circuitry and high power output stages realized with several TO 247- 380W MOSFETs to provide bursting dynamics and controls of multi-driver subwoofer sections.
4
10/ 11
HP LINK & HP LINK 2 TM provide the ability to link respectively two HP 1 D to achieve up to 4000W(RMS) and two HP 1 KD to get the unparalleled power of 6600W (RMS) for the ultimate performance in SPL competitions!
THE HP AMPLIFIERS PROJECT HAS BEEN DEVELOPED TO ENSURE FUNCTIONALITY AND FLEXIBILITY, HIGHLIGHTING THE HI-TECH CHARACTER. HP MANAGERTM, D-CLASS, HP LINK,… HP LINE PROVIDES A FULL SET OF INNOVATIONS OFFERING YOU THE OPPORTUNITY TO EXPERIENCE THE THRILL OF HIGH QUALITY SOUND IN THE MOBILE ENVIRONMENT.
1
2
3
4
TETOLON® SOFT DOME Maximum stiffness and the right linearity for flat, smooth frequency response even beyond damping eliminating rear wave reflections. the audible range.
1
RADIAL VENTING SYSTEM The cooling system limits OVER-SIZED REN® NEODYMIUM Small and powerful 4 2 motor structure with copper-covered pole, for maximum linearity compression and increases mobile voice coil thermal capacity, enhancing dynamics and power handling. and energy. “V” CONE The exponential profile gets very close to AERODYNAMIC DIE-CAST ALUMINIUM BASKET 5 It reduces back wave reflections and provides high mechanical the perfect one, providing exceptional dispersion. 3
14 / 15
HI-ENERGY, THE HERTZ BEST-SELLER LINE, OFFERS UNIQUE PERFORMANCE FOR A WIDE VARIETY OF APPLICATIONS. A TOP-OF-THE-LINE SOUND IN ANY CONDITION, CUTTING-EDGE TECHNOLOGY AND VERY EASY TO INSTALL. SOUND AND PERFORMANCES AT THEIR BEST.
1
2
3
4
5
HSK 130
HSK 165
2 WAY SYSTEM
2 WAY SYSTEM
200 W
250 W
INCLUDED
INCLUDED
HV 130 HV 165 HV 165L INCLUDED
HSK 163 3 WAY SYSTEM 300 W
Technical Specifications
HSK 130 HSK 165 HSK 163
16/17
Size mm (inch) Woofer
Midrange
Tweeter
HV 130
HT 25
130 (5”1/4)
25 (1”)
HV 165
HT 25
165 (6”1/2)
25 (1”)
HV 165L
165 (6”1/2)
HL 70
70 (3”)
HT 25
25 (1”)
Power Handling watt
Peak
Cont. program
Imp. ohm
Freq. Resp.
Sensitivity dB/SPL
Crossover Included
Component Adjustment
Hz
200
100
4
60 - 22k
91
3,5kHz - 12/12dB Oct.
Tweeter: +2, 0, -2 dB
250
125
4
50 - 22k
92
3,3kHz - 12/12dB Oct.
Tweeter: +2, 0, -2 dB
300
150
4
40 - 22k
92
500Hz - 6/6 dB Oct. 4,5kHz - 6/12 dB Oct.
Tw: +2, 0, -2 dB Mid: +2, 0, -2 dB
HGR 250 HGR 300 HGR 380
HCX 690
HCX 130 2 WAY COAX
3 WAY COAX
260 W
140 W
HCX 165 2 WAY COAX 200 W
HCX 130 HCX 165
THREE DIFFERENT TYPES OF MOUNTING FOR ANY GRILLE
ROTARY HIGH FREQUENCY CONTOUR
Technical Specifications
Size mm (inch) Woofer Tweeter
Supertweeter
Peak
Power Handling watt Imp.
Freq. Resp. Sens. Hz
dB / SPL
Magnet
20 (3/4”)
260
130
4
32 - 23k
94
High density flux ferrite Woofer, Neodymium REN® Tweeter/Supertweeter
Cont. program
ohm
HCX 690
6”x9”
28 (1”)
HCX 130
130 (5”1/4)
20 (3/4”)
140
70
4
60 - 22k
91
HCX 165
165 (6”1/2) 20 (3/4”)
200
100
4
50 - 22k
92
High density flux ferrite Woofer, Neodymium REN® Tweeter
Woofer / Cone
Tweeter / Dome
Damped Mesh Fibre
Tetolon fiber®
HT 20
HT 25 TWEETER
TWEETER
100 W
120 W
MOUNTING ACCESSORIES PROVIDED WITH HT 20, HT 25, HSK 130, HSK 165, HSK 163
HL 70 HV 165L
HL 70
HV 165L
CONE MIDRANGE
WOOFER
100 W
Technical Specifications
200 W
Size
Power Handling watt
HT 20
20 (3/4”)
100 @ 3.0 kHz - 12 dB Oct.
HT 25
25 (1”)
HL 70
70 (3”)
HV 165L
mm (inch)
165 (6”1/2)
Imp.
Sensitivity
dB/SPL
4
1,9k - 22k
91
180 @ 2.5 kHz - 12 dB Oct.
4
1,6k - 22k
92
100
4
200 - 14k
92
200
Cont. program
50 100
ohm
Freq. Resp.
Hz
Peak
4
40 - 5 k
92
Magnet
Dome / Cone
Tetolon fiber® Neodymium REN® Damped Mesh Fibre High density flux ferrite
Non pressed paper with cotton fiber
20 / 21
1/3
EP 5
EP 4
630 W
380 W
MAX POWER 1260 W
MAX POWER 760 W
4 CHANNEL AB CLASS AMPLIFIER
5 CHANNEL AB CLASS AMPLIFIER
Technical Specifications Channel mode Power (RMS) @ 14.4V watt @ 4Ω watt Bridge @ 4Ω watt @ 2Ω watt @ 1Ω watt @ 4/2Ω EP LINK watt @ 4Ω EP LINK watt @ 2Ω
Crossover
EP 5
EP 4
EP 2
EP 1 D
EP 2 X
5-3
4-3-2
2-1
1
2
4-3-2
60W x 4 +160W x 1 190W x 2 + 160W x 1 95W x 4 + 250W x 1
60W x 4 190W x 2 95W x 4
60W x 2 190W x 1 95W x 2
400W x 1
220W x 2 700W x 1 350W x 2
100W x 4 320W x 2 160W x 4
190Wx2(4Ω) + 250Wx1(2Ω) 95Wx2(2Ω) + 190Wx1(4Ω)
750W x 1 1000W x 1
EP 4 X
160Wx2(2Ω) + 320Wx1(4Ω)
1500W x 1 1700W x 1 Yes Yes 40 ÷ 400Hz @ 12 dB 10 ÷ 50Hz @ 24 dB 40 ÷ 400Hz @ 12 dB 40 ÷ 400Hz @ 12 dB 25 ÷ 250Hz @ 24 dB 40 ÷ 400Hz @ 12 dB 0 ÷ +12dB @ 45Hz 0 ÷ +12dB @ 45Hz 0 ÷ +12dB @ 45Hz
Yes (A/B) A/B:40 ÷ 150Hz @ 12 dB C:40 ÷ 150Hz @ 24 dB
Yes A/B:40 ÷ 400Hz @ 12 dB A/B:40 ÷ 400Hz @ 12 dB B:0 ÷ +12dB @ 45Hz
0.09 (A/B) 0.09 (C)
0.08
0.05
98dB (A/B) - 102dB (C)
98 dB
100 dB
100 (A/B) 200 (C)
130
130
240 x 450 x 54 9”15/32 x 17”23/32 x 2”5/32
240 x 350 x 54 9”15/32 x 13”25/32 x 2”5/32
4 Ω,≤ 1%THD+N,14.4V
60Wx4Ch + 160Wx1Ch
60Wx4Ch
60Wx2Ch
400Wx1Ch
220Wx2Ch
100Wx4Ch
S/N Ratio
60W Channels: 80dBA 160W Channels: 80dBA
80 dBA
81 dBA
75 dBA
77 dBA
76 dBA
Bypass Hi-pass Hz Lo-pass Hz Boost Hz
THD @ 4 Ohm 1kHz% 100Hz%
S/N Ratio dBA weighed @ 1V
Damping Factor 1kHz @ 4Ω 100Hz @ 4Ω
Size mm inch
RMS Power
Ref. 1W Output
22 / 23
0.15 100 dB
100
Yes A/B:40 ÷ 400Hz @ 12 dB A/B:40 ÷ 400Hz @ 12 dB B:0 ÷ +12dB @ 45Hz
0.05
0.08
100 dB
98 dB
130
130
240 x 230 x 54 240 x 450 x 54 240 x 350 x 54 9”15/32 x 9”1/16 x 2”5/32 9”15/32 x 13”25/32 x 2”5/32 9”15/32 x 17”23/32 x 2”5/32
240 x 500 x 54 9”15/32 x 19”31/32 x 2”5/32
EP 2
EP 1 D
190 W
1000 W
MAX POWER 380 W
MAX POWER 2000 W
2 CHANNEL AB CLASS AMPLIFIER
EP 2 X
MONO D-CLASS AMPLIFIER
EP 4 X
2 CHANNEL AB CLASS AMPLIFIER
4 CHANNEL AB CLASS AMPLIFIER
700 W
640 W
MAX POWER 1400 W
MAX POWER 1280 W
RVC Sub A OPTIONAL
1 V-CONE The exponential profile gets very close to the perfect one, providing exceptional dispersion.
4
2 ULTRA FLAT Small size and shallow depth for installations without limits.
5
NEODYMIUM REN速 Small and powerful motor structure with copper-covered pole, for maximum linearity and energy. 3
24 / 25
NON-PRESSED PAPER V-CONE on the EV 165 L, for the best energy trasfer at low end and mid frequencies.
RHFC 速 TWEETER Provides the ability of orienting tweeter direction according to the listening point, for the benefit of the high frequencies.
IDEAL TO UPGRADE FACTORY OEM SYSTEMS, THE ENERGY LOUDSPEAKERS PROVIDE POWERFUL AND HI-FIDELITY SOUND REPRODUCTION, THANKS TO THE EXCELLENT TIMBER BALANCE AND ADD TO THIS, UNIQUE VERSATILITY. THE ENERGY LINE INCLUDES 26 COMPONENTS FOR A PRODUCT RANGE PERFECT FOR ANY LISTENING AND INSTALLATION NEED.
1
2
3
4
5
26 /27
Technical Specifications
Speaker Size
Power Handling Imp. Freq. watt ohm Resp. Peak
Cont. progr.
EBX 200 R
200 (8”)
500
250
4
30 - 400
91
EBX 250 R
250 (10”)
700
350
4
28 - 300
93
EBX 300 R
300 (12”)
1000
500
4
25 - 250
94
mm (inch)
Hz
Sens.
BxLxH
dB/SPL mm/inch
Magnet Cone
390 x 310 x 288 Single 15”3/8 x 12”1/4 x 11”3/8 magnet, high 465 x 365 x 338 18”5/16 x 14”3/8 x 13”5/16 density flux 545 x 387 x 400 ferrite 21”1/2 x 15”1/4 x 15”3/4
Waterrepellent pressed paper
ECX 87
ECX 100
ECX 130
ECX 165
60 W
80 WATTS
100 W
140 W
2 WAY COAX
2 WAY COAX
2 WAY COAX
2 WAY COAX
INCLUDED
ECX 570
ECX 690
140 W
200 W
2 WAY COAX
Technical Specifications
3 WAY COAX
Size mm (inch) Woofer
Tweeter
ECX 690
6”x9”
40 (11/2”)
ECX 87
87 (3”1/2)
ECX 100
Power Handling watt
Supertweeter Peak
Imp.
ohm
Freq. Resp. Hz
dB / SPL
Sensitivity
200
100
4
40 - 23k
95
15 (19/32”)
60
30
4
120 - 21k
87
100 (4”)
20 (3/4”)
80
40
4
70 - 23k
88
ECX 130
130 (5”1/4)
20 (3/4”)
100
50
4
65 - 23k
91
ECX 165
165 (6”1/2)
20 (3/4”)
140
70
4
60 - 23k
93
ECX 570
5”x7”
20 (3/4”)
140
70
4
60 - 23k
93
28 / 29
15 (19/32”)
Cont. program
Magnet
Woofer / Cone
Tweeter / Dome
High density flux ferrite
Waterrepellent Tetolon fiber® paper
ECX ECX ECX ECX
100 130 165 570
ET 20
EM 100 CONE MIDRANGE
TWEETER 100 W
EV 130 WOOFER
150 W
EV 165 WOOFER 140 W
160 W
MOUNTING ACCESSORIES PROVIDED WITH ESK 130, ESK 165, ESK 165L, ESK 570, ESK 163L
ET 20
EM 100
EM 100 EV 130 EV165 EV 165 L
EV 165 L WOOFER 140 W
Technical Specifications
Size
mm (inch)
Power Handling
watt
Peak
Cont. program
Imp.
Freq. Resp.
Sensitivity
4
2k - 23k
91
ohm
Hz
dB/SPL
ET 20
20 (3/4”)
EM 100
100 (4”)
150
75
4
400 - 14,5k
90
EV 130
130 (5”1/4)
100
50
4
65 - 8k
91
100 W @ 3,5 kHz - 12 dB Oct.
EV 165
165 (6”1/2)
140
70
4
60 - 8k
93
EV 165L
165 (6”1/2)
140
70
4
50 - 6k
92
Magnet
Neodymium REN
Cone Tetolon fiber®
Water-repellent paper High density flux ferrite Water-repellent non pressed paper
DIECI LOUDSPEAKERS OFFER ADVANCED TECHNOLOGY FOR A POWERFUL SOUND. THEIR EFFICIENCY MAKES THEM EASY TO BE DRIVEN EVEN AT LOW POWERS. DIECI LINE HAS GIVEN LIFE TO A NEW REFERENCE WITHIN THE VALUE-ORIENTED MARKET.
1 V-CONE The exponential profile gets very close to the perfect one, providing exceptional dispersion.
RUBBER COVER Silicon rubber protection of the powerful motor assembly.
2
MYLAR DOME Together with REN速 Neodymium motor, ferrofluid cooling, and housing with unique design: a high efficiency, with very good off-axis response. 3
30 / 31
1
2
3
SYSTEM DSK 130 2 WAY SYSTEM
DCX 690 3 WAY COAXIAL
DSK 165 2 WAY SYSTEM
120 W
160 W
180 W
INCLUDED
DCX 100 2 WAY COAXIAL
DCX 130 2 WAY COAXIAL
60 W
Technical Specifications
INCLUDED
DCX 165 2 WAY COAXIAL
80 W
Size mm (inch) Woofer Tweeter
Supertweeter
Power Handling watt Peak
Cont. program
120
60
160
80
120 W
Imp.
ohm
Freq. Resp. Sensitivity
60 - 21k
91
3,5KHz - 6/12dB Oct.
4
50 - 21k
93
3,5KHz - 6/12dB Oct.
15 (19/32”)
DSK 165
DV 165
165 (6”1/2)
DT 16
15 (19/32”)
DCX 690
6”x 9”
60 (2” )
180
90
4
45 - 22k
95
DCX 100
100 (4”)
15 (19/32”)
60
30
4
70 - 21k
90
DCX 130
130 (5”1/4)
15 (19/32”)
80
40
4
60 - 21k
91
DCX 165
165 (6” )
15 (19/32”)
120
60
4
60 - 21k
93
15 (19/32”)
80W@3,5KHz - 12dB Oct.
4
3k - 21k
93
DT 16
32 / 33
1/2
Crossover included
4
130 (5”1/4)
15 (19/32”)
Cone
dB/SPL
DV 130
1/2
Magnet
Hz
DSK 130
DT 16
INCLUDED
High density flux ferrite
Waterrepellent pressed paper
Neodymium
Mylar
3,5KHz - 12dB Oct.
COMP DT 16 TWEETER
DS 300
DS 250
SUBWOOFER
SUBWOOFER
80 W
300 W
300 W
MOUNTING ACCESSORIES PROVIDED WITH DT 16, DSK 130, DSK 165
GRILLE PROVIDED WITH DS 250, DS 300
DT 16
DV 130 DV 165
DBX 250 SUB BOX 300 W
Technical Specifications
mm (inch)
Size
Power Handling watt Peak
Cont. program
ohm
Hz
Freq. Resp.
Sensitivity dB/SPL
mm
DS 250
250 (10”)
300
150
4
32 - 400
90
38
DS 300
300 (12”)
300
150
4
28 - 300
92
38
Technical Specifications
mm (inch)
DBX 250
Imp.
Voice Coil
Magnet
Cone
X-mech
Hight density flux ferrite
Waterrepellent pressed paper
mm
10 10
Speaker Size
Power Handling watt Peak
Cont. program
ohm
Impedance Freq. Resp. Hz
Sensitivity dB/SPL
mm / inch
BxLxH
Magnet
Cone
250 (10”)
300
150
4
32 - 400
90
450 x 257 x 327 17”3/4x10”1/8x12”7/8
Hight density flux ferrite
Water-repellent pressed paper
34 / 35
SPACE K6 2 WAY SYSTEM
SPACE K8 2 WAY SYSTEM
250 W
300 W
INCLUDED
INCLUDED
INCLUDED
INCLUDED
SPACE K6L 2 WAY SYSTEM
2 WAY SYSTEM
200 W
250 W
Technical Specifications
SPACE K6 SPACE K8 SPACE K6L SPACE K8L
36 / 37
SPACE K8L
Size mm (inch) Woofer
Tweeter
SPACE 6
SPACE 1
165 (6”1/2)
28 (1”1/8)
SPACE 8
SPACE 1
200 (8”)
28 (1”1/8)
SPACE 6L
SPACE 1
165 (6” )
28 (1” )
SPACE 8L
SPACE 1
200 (8”)
28 (1”1/8)
1/2
1/8
Power Handling watt Peak
Cont. program
Imp. ohm
Freq. Resp. Hz
250
125
4
45 - 25k
300
150
4
40 - 25k
200
100
4
45 - 25k
250
125
4
40 - 25k
Crossover Included
Component Adjustment
Sound Control
2,8kHz -12/12dB Oct.
Tweeter: +2, 0, -2 dB
BSC®
SPACE 1 TWEETER 180 W
Big Chamber
SPACE K6
SPACE K8L
SPACE K8
SPACE 6
SPACE K6L
SPACE 8
Small Chamber
SPACE 8 WOOFER
Mounting accessories provided with Space 1, Space 6K, Space 8K, Space K6L, Space K8L
260 W
INCLUDED
INCLUDED
SPACE 6 WOOFER 200 W
Technical Specifications
Size
Power Handling watt
mm (inch)
Peak
Cont. program
Imp. ohm
Freq. Resp.
Sensitivity
Hz
dB/SPL
SPACE 1
BIG CHAMBER
28 (1”1/8)
180W@1.8kHz - 12dB Oct
4
950 - 25k
91
SPACE 1
SMALL CHAMBER
28 (1”1/8)
180W@2.0kHz - 12dB Oct
4
1,3k - 25k
91
SPACE 6
165 (6”1/2)
200
100
4
45 - 5,5k
91
SPACE 8
200 (8”)
260
130
4
40 - 4,8k
92
Magnet
Membrane
Tetolon® Neodymium REN®
Waterrepellent paper
Progetto1
18-12-2008
12:01
Pagina 1
SPL MONSTER AND SPL SHOW LINE WERE DESIGNED ACCORDING TO THE SPECIFIC NEEDS OF THOSE TEAMS WHO TAKE PART IN SPL COMPETITIONS AND THAT WANT TO DOMINATE. SUBWOOFERS AND AMPLIFIER FOR THE BEST PERFORMANCE IN ANY APPLICATION.
38 / 39
Progetto1
18-12-2008
12:01
Pagina 2
SPLSUB M 12 UNLIMITED SUBWOOFER
M 15 UNLIMITED SUBWOOFER
8000 W
8000 W
Mobile Group Specifications
MG 12 2x1.2s2 MG 12 2x1.0s2 MG 12 2x1.0s4 MG 12 2x1.5s2 MG 12 2x1.5s4
MG 12 MG 15 MOBILE GROUP
NPP* Mob. Group KEV Mob. Group KEV Mob. Group KEV Mob. Group KEV Mob. Group
MG 15 2x1.2s2 NPP* Mob. Group MG 15 2x1.0s2 KEV Mob. Group MG 15 2x1.0s4 KEV Mob. Group MG 15 2x1.5s2 KEV Mob. Group MG 15 2x1.5s4 KEV Mob. Group
Cone
DSS
Paper Cone
Nominal Impedance X-mech D Xmax Re Ω Ω mm mm mm
Fs Hz
Le Le Vas mH@1kHz mH@10kHz l
Mms Cms BL Qts Qes Qms Spl g mm/N T-m dB
2 spiders
1.2 + 1.2
28
245
10
2,1
39
1,16
0,38
21,70 236,7
0,07 21,58 0,25 0,26 5,08 95
Kevlar sandwich 2 spiders
1.0 + 1.0
25,5
245
7,5
1,9
44
1,00
0,33
16,90 246,2
0,05 19,71 0,30 0,32 5,16 95
Kevlar sandwich 4 spiders
1.0 + 1.0
25,5
245
7,5
1,9
62
1,00
0,33
8,30
261,6
0,03 20,39 0,44 0,48 6,80 94,5
Kevlar sandwich 2 spiders
1.5 + 1.5
26,5
245
8,5
2,8
43
1,30
0,42
19,40 237,8
0,06 23,38 0,30 0,32 5,00 93,5
Kevlar sandwich 4 spiders
1.5 + 1.5
26,5
245
8,5
2,8
63
1,30
0,42
7,90
0,02 23,81 0,49 0,52 6,75 92,5
262,0
2 spiders
1.2 + 1.2
28
320
10
2,1
36
1,14
0,38
61,00 295,3
0,07 21,87 0,28 0,29 5,38 98
Kevlar sandwich 2 spiders
1.0 + 1.0
25,5
320
7,5
1,9
42
1,00
0,33
48,10 268,8
0,05 19,95 0,32 0,35 5,61 98,5
Kevlar sandwich 4 spiders
1.0 + 1.0
25,5
320
7,5
1,9
61
1,00
0,33
20,00 309,7
0,02 20,68 0,49 0,53 6,85 97,5
Kevlar sandwich 2 spiders
1.5 + 1.5
26,5
320
8,5
2,8
43
1,30
0,42
47,10 265,7
0,05 23,36 0,34 0,36 5,23 97
Kevlar sandwich 4 spiders
1.5 + 1.5
26,5
320
8,5
2,8
60
1,30
0,42
21,20 304,7
0,02 24,37 0,49 0,54 6,50 96
Paper Cone
* Factory provided mobile group
Technical Specifications
Size
Power Handling watt Peak
Cont. program
ohm
Imp.
Freq. Resp. Hz
dB/SPL
mm
M 12 UNLIMITED
300 (12”)
8000
2000
1.2+1.2
32 - 1000
95
75
M 15 UNLIMITED
380 (15”)
8000
2000
1.2+1.2
21 - 700
98
75
40 / 41
mm (inch)
Sensitivity
Voice Coil
Magnet
Cone
Double magnet, high density flux ferrite
Non-pressed paper
X-mech mm
28 28
AMP MP 15 K UNLIMITED D-CLASS SPL AMPLIFIER
15000 W
Technical Specifications
MP 15 K UNLIMITED 2-1
Channel mode watt @ 4Ω watt @ 2Ω watt @ 1Ω
Stereo 1000W x 2 2000W x 2 3000W x 2
Bridge 4000W x 1 6000W x 1 8000W x 1
watt @ 4Ω watt @ 2Ω watt @ 1Ω
1500W x 2 2800W x 2 4500W x 2
5600W x 1 9000W x 1 12000W x 1
watt @ 4Ω watt @ 2Ω watt @ 1Ω
1800W x 2 3400W x 2 5500W x 2
6800W x 1 11000W x 1 15000W x 1
watt @ 4Ω watt @ 2Ω watt @ 1Ω
2300W x 2 4400W x 2 6100W x 2
8800W x 1 12000W x 1 15500W x 1
Power (RMS) @ 12V
Power (RMS) @ 14.4V
Power (RMS) @ 16V
Power (RMS) @ 18V
Crossover Lo-pass Hz Subsonic Output Mode Chain Mode
THD @ 4 Ohm 100Hz%
S/N Ratio dBA weighed @ 1V
Damping Factor 100Hz @ 4Ω
Size mm inch
OFF / Lo-pass: 10 ÷ 50 Hz @ 24 dB/Oct. OFF / Hi-pass: 10 ÷ 50 Hz @ 24 dB/Oct. Stereo By-pass / Bridge / L + R Mix Master / Slave 0,15 69 > 950 323 x 830 x 68,5 12”3/4 x 32”11/16 x 2”3/4
BRACKETS INCLUDED
SUB COMP SX 250D
SX 300D
2400 W
3200 W
SUBWOOFER
SUBWOOFER
SX 380D SUBWOOFER 4000 W
HGR 250 HGR 300 HGR 380 OPTIONAL GRILLE
DOUBLE VOICE COIL
Technical Specifications
SX 250D
Size
Power Handling watt Peak
Cont. program
Imp.
Freq. Resp.
Sensitivity dB/SPL
mm
250 (10”)
2400
600
2+2
34 - 800
90,5
65
mm (inch)
ohm
Hz
Voice Coil
SX 300D
300 (12”)
3200
800
2+2
28 - 700
91
65
SX 380D
380 (15”)
4000
1000
2+2
25 - 600
92
65
42 / 43
Magnet
Cone
Triple magnet, high density flux ferrite
Pressed Paper Cone
X-mech mm
23 23 23
In order to deliver such extraordinarily high power, the power supply stage features 8 toroidal transformers, 28 - 3300 uF 105° Low ESR primary capacitors for a total of 92400 uF; 32 - 160 A TO247 Mosfets and 22 - 820 uF secondary capacitors capable of 200 V.
Direct CurrentÂŽ, 4 - 1/0 AWG cables terminated with ring terminals on the supply side and secured to the amplifier with 4 - 2,5 mm thick copper buss bars connected directly to the printed circuit board, providing the ability to transfer power between battery and amplifier with very low contact resistance.
The output stage, settable in bridged or stereo mode, features 20 - 190 A / 360 V impulsive current Mosfets: robust power and thermal dissipation without compromise.
Hertz SPL Stack SystemÂŽ stacks multiple amplifiers thanks to the 6 supplied 2 mm robust iron Brackets. The threaded mounting points on the heatsink let your SPL power plant grow without limits.
The innovative RMA (Removable Moving Assembly) provides the ability to replace the entire mobile assembly in few seconds, without removing the speaker from its mounting position, choosing the one configuration appropriate to your needs. The available mobile assemblies differ in the typology of the spiders, cone material and voice coil impedance.
Large triple magnet, for perfect control under high power, very high excursion conditions for top SPL performance.
Double Symmetrical Spiders system, it allows unprecedented control even under extreme excursions of the mobile assembly.
Aluminium voice coil wound on four layer former, for unheard of thermal and mechanical capacity.
Power transfer is carried out through screw terminals that accept high current cables to 8 AWG.
Back Vented Spider Support, for perfect symmetry under high excursion while providing increased thermal dissipation. Internally reinforced basket, protected from abrasions with high resistance paint.