Narrow in proďŹ le, but big in effect
NisTech Hybrid-Pro 600
55
B
AS
approved
in accordance with TL Mobile Protective Devices 97 and EN 1317-2
t te 37 1 0 st n o 2
E
CertiďŹ ed safety - T3/W2
Hybrid-Pro 600
The portable concrete wall
Why a new generation of mobile protective devices? Almost everyone is familiar with this situation: There’s a lot of traffic on the motorway and one truck after the other is queuing up in the right lane. Then you get to a construction site with narrow lanes. The left lane is suddenly too narrow for a car with a total width of more than two metres, a criteria that most vehicles meet nowadays.
2m
2,1m
2m
2,1m
The driver becomes uncertain or even fearful, because he feels trapped between the truck on the right side and the wide protective wall on the other.
This situation can quickly result in an accident. Because the width of the lanes is defined only a narrower protective wall can create more space and thus more safety. German lawmakers are attempting to keep up with this in future by revising related regulations and reducing the approved width to 30 cm - a challenge that NisTech has successfully met with the Hybrid-Pro 600.
RSA derzeit - Baubreite 500 mm
The specified lane width of 2.1 m refers to the width of the protective wall.
The width without base plate is only 12 cm.
Nistech Steel-Pro 500 - Baubreite 295 mm
2
Innovatively designed, developed in line with the market, successfully tested - the new Hybrid-Pro 600 Technical data Hybrid-Pro 600 Collision test Acceptance test
TB 21+ TB 41
TB 11 + TB 42
Containment level
T3
H1
Test length
180 m
144 m
Ground anchoring
no
yes (one-sided anchoring)
Test conditions Impact test
Type of vehicle
Gross vehicle weight
Impact angle
Impact speed
TB 21 / TB 41
Passenger car/truck
1,3 t / 10 t
8°/ 8°
80 km/h / 70 km/h
TB 11 / TB 42
Passenger car/truck
0,9 t / 10 t
20°/ 15°
100 km/h / 70 km/h
Working widths pursuant to DIN-EN 1317-2 and TL Mobile Protective Devices (BASt) Containment level
Dynamic deflection
Construction width
range of effect (sum, sp. 2+3)
ASI value
T1
0,1 m
0,3 m
0,4 m W1
0,4 (A)
T3
0,4 m
0,3 m
0,7 m W2
0,4 (A)
Working width acc. to DIN EN 1317-2: H1
1,3 m
0,3 m
1,6 m W5
1,6 (C)
BASt Test no. 2T1+T3: 2013 7E 55 BASt Test no. reflecting device: V4-64/2010
3
Easy handling, fast and safe to set up
Time is safety – the sooner a protective barrier can be in place, the safer the hazardous workplace.
4
One truck (40 t) can transport up to 10 Hybrid-Pro 600 barriers to their place of deployment.
The barriers may be offloaded and placed in position safely and quickly using special lifting gear (spreader bar).
Rope slings or eye bolts are screwed into the threads provided for offloading and installation and hooked into the spreader bar.
Fast and safe unloading and installing is ensured.
Set up well thought out down to the smallest details
Special lifting gear (spreader bar) lifts the Hybrid-Pro 600 from the transport vehicle onto the road...
... for easy positioning by the installation team.
A guide ensures that the Hybrid-Pro 600 elements are quick and easy to assemble. Due to identical design of the ends‌
The main components are connected using a rod/hole system and connecting element.
The connecting element is to this end placed on the butt joint of the main elements, form-fit...
...alignment can be ignored.
...and connected using two force-locking bolts.
5
Technical details Wall element, side view (12 m | 6 m | 3 m)
12 m
0,61 m
3m
Wall element, top view
12 m
Anchoring element, side view
Expansion element, side view
0,61 m
0,61 m
variable from 2,5 to 3,5 m
0,89 m
Anchoring element, top view
Expansion element, top view 0,295 m variable from 2,5 to 3,5 m
0,89 m
Anchoring element
Expansion element
Length
0,89 m
Length
variable 2,5 to 3,5 m
Height
0,61 m
Height
0,61 m
Weight
90 KG
Weight
320 KG
6
The expansion element should be built in every 1000 m, or after 83 x 12 m elements.
Wall element, side view (12 m | 6 m | 3 m) 0,61 m
Length
12 m
6m
3m
Height
0,61 m
0,61 m
0,61 m
Weight
2,3 t
1,3 t
0,7 t
0,61 m
6m
Wall element, top view (12 m | 6 m | 3 m) 0,295 m
Width
0,12 m
with footplate
0,295 m rubberised
Lowering element 1:5, side view
0,61 m
Lowering element 1:5
1:16
Length
3,5 m
8,5 m
Height
0,61 m
0,61 m
Weight
0,6 t
1,2 t
3,5 m
Lowering element 1:16, side view
0,61 m 8,5 m
Individual adapter A
Individual adapter A, side view
0,61 m
Length
1,4 m
Height
0,61 m
Weight
70 KG
1,4 m
7
Friedrichstädter Chaussee 4 | 25832 Tönning | Germany
Tel: +49 (0) 4861-612-0 | Fax: +49 (0) 4861-612-169 | E-Mail: info@nistech.eu | www.nistech.eu
06/14 · 20140602 // 147511 // tangram-werbeagentur.de
NisTech GmbH