USER GUIDE
tangraminteriors.com
1
Welcome! Get To Know This Work Point 01/ Desk 02/ Steelcase Karman Chair 03/ Ergonomic Adjustments
2
Operating the Height Adjustable Desk
SIMPLE TOUCH CONTROLLER OPERATING THE CONTROLLER The desk adjusts via the simple touch controller. •
Lift up or press down on the controller to reach the desired desk height.
•
The desk will continue to move up or down until the controller is released or the minimum or maximum height is reached.
Note: The user must continuously lift up or press down the controller in order for the desk to move.
3
Touch Latch Storage Drawers
Tap Here
OPERATING THE STORAGE DRAWERS Your storage drawer operates to open and close with a touch latch mechanism. To best open and close press near the top of the drawer in the center to engage the mechanism.
4
Undermount Touch Light MOTION SENSOR LIGHT SWITCH Wave your hand to turn On and Off
Located Here
Located Here
5
Operating the Steelcase Karman Chair
ORGANIC MOVEMENT
A weight-activated mechanism responds automatically to your body as you sit and change postures in every direction.
4D ARM
PATENTED HYBRID SEAT
The suspension seat with integrated cushioning provides maximum comfort for as long as you sit.
Fully adjustable armrests raise Up and down, pivot in and out and shift in all directions, letting your arms and shoulders fall naturally into place.
LIVE BACK
COMFORT EDGE
The ultra-light frame flexes to eliminate hard edges and pressure points on your legs and body.
LiveBack technology balances body weight, supporting your back and spine while providing responsive, personalized comfort and fit.
COMFORT DIAL
The comfort dial supports four recline positions, letting you dial in the right level of resistance against your back as you recline.
LUMBAR SUPPORT
Opional lumbar support allows you to customize the support for your Lumber region.
6
Optimizing the Ergonomics of Your Work Point HERE ARE SOME TIPS TO HELP BEGIN YOUR WELLBEING JOURNEY.
WHEN SEATING
Seated Ergonomics 1. Back has full contact with the backrest (sit all the way back in chair). 2. Lower back fits into curved lumbar support. 3. Tension is adjusted so backrest reclines easily, yet provides smooth, even support, and encourages postural change. Upper Body Ergonomics 4. Elbows and forearms can rest comfortably on the arms of your chair, without bearing weight. 5. Forearms should be at a 90-110 degree angle to the floor. 6. Wrists should be straight when keying or mousing, not bent up or down.
WHEN STANDING
Monitor Adjustments 7. Top of monitor is at eye level or slightly lower and directly in front of worker so head is not turned. 8. Monitor should be 20” to 30” from the eyes or approximately an arm’s length away. Lower Body Ergonomics 9. Thighs are parallel to the floor. 10. Feet are flat on the floor or on a footrest. 11. Avoid locking knees to help maintain good posture. 12. Feet should be flat on the floor, hip width apart.
7
THANK YOU!
tangraminteriors.com