LUCERA

Page 1

The LUCERATM event pole range was developed to provide extreme flexibility in illuminating of modern urban spaces that can flow through exterior environments providing illumination for safety, efficiency and versatility. The LUCERATM range is a fully customizable modular system in height, optical distribution and adjustability.

Overall Height Range

Customizable modular system

This minimal square form factor is available in 2 pole heights, 1 bollard, and 7 luminaire assembly options. LUCERATM is a completely customizable modular system with both fixed and adjustable positions, 9 optical distributions including Types I–VS for path and street lighting illumination, 4 static color temperatures or Tunable White and RGBW dynamic lighting, and 6 standard finishes.

The optical system features a double sided chamfered edge with inset luminaires in fixed or adjustable optics.

Consult factory for other configurations.

Pole

H. 16.4ft

Wind Resistance

factory for higher

rating options.

Bollard

Luminaire Assembly

LED Colors

White

LUCERATM4
2700K 3000K 3500K 4000K Tunable
RGBW
H. 11.5ft
18.7ft – 20.8ft 13.8ft – 15.9ft
140mph 125mph Consult
wind
5.9in2
Height of Bollard H. 3.28ft
Fixed Type I Type II Type III Type IV Type V Adjustable SP 15° NFL 29° FL 36° MWFL 44°
Targetti
LUCERATM76

Configurations

the wide variation of luminaire assemblies and pole height options, the

to any surrounding

makes it possible to

Pole Height

Height

Profile

Profile

Targetti LUCERATM98 13.8ft 14.1ft 14.6ft 15.0ft 15.4ft 15.9ft 11.5ft 5.9in2 4 2+2 2 Bollard 6 2+4 4+42+6 3.28ft 8 5.9in2 18.7ft 19.0ft 19.6ft 20.4ft 20.0ft 20.8ft 16.4 ft 4 2+2 6 2+4 4+42+68 Pole
Pole
With
LUCERATM range
easily adapt
environment.
Pole

Adjustable optics

When there are specific design needs, LUCERATM is the ideal solution due to its ability to conform to both general lighting as well as specialty accent lighting.

Luminaire Assembly Options

One of the largest advantages to the adjustable LUCERATM version is its optical versatility within the 7 luminaire assembly options and flexibility with multiple projector optics. This allows for different beam angles depending on the needs of the surrounding environments.

Every pole can be equipped with 4, 6 or 8 total projectors positioned on two axes or on all 4 axes for maximum project flexibility.

Targetti LUCERATM1110
Four projectors on the same axis 4 Six projectors on the same axis Two projectors on one axis and two on the other 62+2 Two projectors on one axis and six on the other 2+6 Four projectors on one axis and four projectors on the other 4+4 Eight projectors on the same axis Two projectors on one axis and four on the other 82+4

Horizontal pan rotation

Maximum Flexibility

Every luminaire has the ability to be shifted to either side of the pole and rotated by 359° vertical tilt rotation with variable luminaire positions, flush or extracted.

In addition, each luminaire optic can be externally rotated by +/-20° horizontal pan rotation for ultimate flexibility.

can be shifted from

side to the other and aim locked into position

Vertical tilt rotation

Targetti LUCERATM13 A1 A2
The luminaire
one
359° +/- 20° Beam optics SP (15°) NFL (29°) FL (36°) MWFL (44°) The luminaire assembly is equipped with pairs of projectors available in 4 different beam optics. 4 A1 – A2 +20° +20°
Targetti
LUCERATM1514

Application Environments

Targetti LUCERATM1716 Landscape Trees and Pathways Performance Stage and Area Lighting 6 projectors 14.6ft Overall Height 4+4 projectors 20.8ft Overall Height The flexibillity LUCERATM offers makes it easy to conform to a variety of different architectural environments.
Sculptural Accent and Ambience Streetscape Pedestrian and Facade Entertainment Color Changing Feature Lighting 6 projectors 19.6ft Overall Height 4+4 projectors 15.9ft Overall Height 4+4 projectors 20.8ft Overall Height

Fixed optics

The LUCERATM range of fixed optics are factory set luminaire positions designed to deliver specific IES Type distributions, optimizing on center spacing and footcandle requirements.

Type III

Asymmetrical bat wing distribution

This type of distribution is used in areas where it is important to push the light in both depth and width, typically finding use in applications such as plazas or courtyards. The optical system has a 40° beam opening, ideal for lighting wide areas up to 2.75 times the installation height. In a single pole configuratoin, the 11.5ft pole has a distribution of 31.5ft and a 16.4ft pole has a distribution of 45ft.

There are five projector assemblies available.

Type distributions based on 4000K.

Illumination [fc]

1.9

Type I

Fixed distribution

2 + 6 Luminaires

This distribution is the ideal choice for applications such as walkways, paths or footpaths. The optical system has a 15°+15° beam opening that makes it suitable for lighting paths that have a width of up to 2 times the installation height of the light units.

Type II

Slightly asymmetrical Fixed distribution

2 + 6 Luminaires

Ideal for wide walkways, access roads, ramps or any other area that requires long and narrow lighting. The optical system has a 25° beam opening, ideal for lighting areas up to 4 times the width of the installation height and 1.75 times the depth. In a single pole configuratoin, the 11.5ft pole has a distribution of 46ft and a 16.4ft pole has a distribution of 65ft.

Avg 3.2fc Uniformity 4:1 Pole Height: 16.4ft Overall Height: 20.8ft

65ft

Avg 3.1fc Uniformity 4:1 Pole Height: 16.4ft Overall Height: 20.8ft

65ft

Type IV

Semicircular distribution

The marked asymmetrical optic has a 60° beam opening, making it the most suitable solution for lighting both horizontal planes like parking areas, as well as vertical surfaces like building facades. It is ideal to light areas up to 2.75 times the installation height. In a single pole configuration, the 11.5ft pole has a distribution of 31.5ft and a 16.4ft pole has a distribution of 43ft.

Avg 2.9fc Uniformity 2.75:1 Pole Height: 16.4ft Overall Height: 20.8ft

Type VS Spherical distribution

A spherical 360° distribution that has equal illumination on all sides. A single 11.5ft pole has a 34.5ft diameter distribution and a 16.4ft pole has a 49ft diameter distribution.

Avg 3.3fc Uniformity 2.75:1 Pole Height: 16.4ft Overall Height: 20.8ft

43ft

Avg 2.5fc Uniformity 3:1 Pole Height: 16.4ft Overall Height: 20.8ft

Targetti LUCERATM1918
1.4 2.3 2.8
49ft
45ft
2
+ 6 Luminaires
2
+ 6 Luminaires
4
+ 4 Luminaires

LUCERATM

Fixed optics

Guide

Select the color temperature for the fixed luminaires

LUCERA BOLLARD Select optic and color temperature

Other color temperature options available consult factory.

Beam optics

Asymmetrical

Select the color temperature for adjustable or bollard luminaires

Adjustable optics

Beam optics

Targetti LUCERATM2120 1 2 H 11.5ft H 16.4ft 3 SP ( 15°) NFL ( 29°) FL 36°) MWFL ( 44°) SP ( 15°) NFL 29°) FL ( 36°) MWFL 44°) Tunable white 2700K 3000K 3500K 4000K 2700K 3000K 3500K 4000K RGBW *Select the pole Select between a fixed or adjustable optical system
OR
Type I Linear 4 Four projectors on the same axis 6 Six projectors on the same axis 2+4 Two projectors on an axis and four on the other Type II Asymmetrical linear Type III
bat wing Height 2+2 Two projectors on an axis and two on the other
Specification
2+6 Two projectors on an axis and six on the other 4+4 Four projectors on an axis and four on the other Type IV Front asymmetrical Type V Circular
8 Eight projectors on the same axis

Optional Pole Accessories

Targetti LUCERATM2322
Break Away Banner Arm Photocell Motion Sensor Speaker Decorative Base Cover Camera
Targetti 24

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.