Easylifter
™
Product Code
062113 rolling Door Opener
Specifications: Motor Specifications Power Supply
230-240VAC
Transformer Voltage Prim 230-240VAC Sec: 24VAC Standby Power Consumption
2.5W
Motor Type
Permanent magnet
Motor Voltage
24 VDC
Motor Power
100W
Motor Output Speed
70rpm
Travel Speed (mm/sec) Open/Close
160 / 160
Soft Start/Soft Stop
No
Manual Release
Integral motor/ clutch type pull/pull
Lockable Engage Disengage No Courtesy Light
Yes (variable)
Light Source
2 x festoon globe - 15W, 24V
Door & Mounting Specifications
The Easylifter™ rolling door opener is one of B&D's openers for the retail market. This product is designed for DIY orientated consumers.
PART NO. 062113
Maximum Lifting Force
300N
Maximum Door Weight
100kg
Recommended Lateral Space Requirements
135mm
Minimum Lateral Space Requirements
85mm
Opener Weight
7.5kg
Weight Bar
2kg metal filled plastic bottle
Transmitter Specifications
Contains 062266
31/4 turns
Maximum Door Size (Area) 15m2
Description:
Easylifter Rolling Door Opener
Maximum Door Travel Limit in Barrel Turns
1 button transmitter
Code Format Fixed Code 3 billion codes Transmission Frequency 433.92MHz Transmitters Shipped with Unit
2
Transmitter (1)Type specification
B&D 1 button (062266)
Transmitter (2)Type specification
B&D 1 button (062266)
Receiver Storage Capacity 10 + 1 dip switch (No. of Transmitters) + 1 keypad See overleaf for continuation of Specifications...
Easylifter
™
Product Code
062113 rolling Door Opener
Optional Accessories & Auxillary Inputs Safety Infra-Red Beam
Yes
Wireless Keypad Transmitter
Yes
Battery Back Up
Yes - available as accessory
Other Features Obstruction Force Margin
Adjustable
Overload Indicator
Yes
Service Indicator
Yes
Mains Failure Indicator
Yes
Obstruction Indicator
Yes
Door Travel Limits Setting
Motor driven
Auto Close
Yes - adjustable
Fig. 1 shows the minimum sideroom that is required. The distance between the edge of the door curtain and the inside of the bracket is 85mm minimum, and the distance between the edge of the door curtain and the outside of the bracket is 135mm minimum. Fig. 2 shows the recommended sideroom. The distance between the edge of the door curtain and the inside of the bracket should be 110mm, and the distance between the edge of the door curtain and the outside of the bracket is 160mm. MINIMUM ROOM MINIMUM SIDE SIDEROOM
FIG.1
RECOMMENDED SIDE SIDEROOM RECOMMENDED ROOM
FIG.2
Warranty Warranty (Years)
1 year parts only
Features: • Suitable for doors up to 15m2. • Strong and reliable DC motor. • 433MHz radio frequency for better reception and less interference. • Easy limits to set up with cams.
Method of operation: Activate the operator by either the door control button, outside key switch or keyless entry system, the remote control transmitter or manually open the door, by pulling the release handle down.
The Easylifter Rolling Garage Door Opener can be installed on the left or right hand side of the door (when looking out from the inside of the garage). If the opener is to be installed on the RIGHT HAND side of the door, then no change needs to be made, as this is the standard factory setup. If LEFT HAND side installation is required, the next step is to move the motor wire connector on the control board. The connector plug has to be removed and reconnected to the LEFT side of the connector (Fig.4). If you have made an error in the selection and wish to install on the RIGHT HAND side, then reconnect the connector plug on the RIGHT side of the connector (Fig.5).
Door type:
FIG.4
Standard residential rolling garage doors.
Installation requirements/ instructions: The door must be well balanced and be in a reasonable operating condition. You should be able to lift the door smoothly and with little resistance. It should stay open around 900mm to 1200mm above the floor. The door should not stick or bind in the guide tracks. The ideal operational effort in raising or lowering the door should not exceed a force of 10kg (22 lbs.). Make sure that all door locks are either removed, or disabled and remove unnecessary accessories.
Connect the middle and left hand side pins for left hand side installation
FIG.5
Connect the middle and right hand side pins for right hand side installation
RP 07/06
Easylifter
™
Product Code
062113 rolling Door Opener
Trouble shooting & maintenance: SYMPTOM
POSSIBLE CAUSE
Door will not operate
Mains power not switched on.
Switch on mains power.
Door is obstructed.
Remove obstruction.
Door is locked or motor jammed.
Unlock door or remove jam.
Door tracks/hardware damaged.
Door requires service/repair by qualified technician.
Adverse weather conditions (wind or cold) causing door to stiffen and become tight in the tracks.
Increase force margin setting. Or re-calculate force margin.
Possible obstruction in the doorway.
Remove obstruction.
Door operates from drive unit (O/S/C) button but not from transmitter *(See note)
Transmitter code not stored in memory.
Code transmitter into openers memory.
Flat Battery.
Replace battery A23 Alkaline 12V.
Door will not open or close fully
Door limits position need to be reset.
Reset limits position.
Courtesy light not working
Globe blown.
Replace globe - festoon type 15W 24V DC.
Door not working with IR Beam installed
Safety infra-red beam or wiring faulty.
Repair safety infra-red beam or replace wiring.
Door starts to close but automatically reverses to open position
Safety infra-red beam not aligned correctly. Safety infra-red beam is obstructed. Door obstructed when closing.
REMEDY
Re-align optics. Remove obstruction from the path of safety infra-red beam. Remove obstruction.
Globe keeps blowing
Incorrect globe voltage - must be 24V DC.
Replace globe - festoon type 15W 24V DC.
Auto close not working
Safety infra-red beam or wiring faulty.
Repair safety infra-red beam or replace wiring.
Safety infra-red beam not aligned correctly. Safety infra-red beam is obstructed. Door obstructed when closing. Auto close time not set.
Re-align optics. Remove obstruction from the path of safety infra-red beam. Remove obstruction. Set auto close time.
*Please Note: Some areas may be prone to excessive radio interference brought on by devices such as cordless telephones, wireless stereo headphones and baby monitors. It is possible that these devices could cause a degree of interference such as to greatly reduce the range of the transmitter. In such an instance please contact your B&D dealer for an alternative frequency replacement kit. As this is not a warrantable situation but an environmental issue charges may apply for the changeover.
Easylifter
™
Product Code
062113 rolling Door Opener
Spare parts list: ITEM NO.
PART NO.
DESCRIPTION
ITEM NO.
PART NO.
DESCRIPTION
1
Limits Assy GDO-4
41
Hex Head Screw M8x25
2
Limits Base
42
Hex Flange HD. Screw M6x16
3
Adjustment Screw Green/Red
43
Pan Serration HD. Screw M4x12
4
Switch Holder Green/Red
44
Taptite Screw 'P' M4x10
5
E Circlip D1500 0040
45
Taptite Screw 'P' Black ZNC M3x16
6
Miniature Microswitch
46
Button HD. Screw W/Washer M6x16
7
Disengagement Spring
47
Pan HD. Screw M3x10
8
Motor Base
48
Hex Flange Nut M6
9
Cam
49
Retaining Ring STW 45
10
Disengagement Lever
50
E Circlip D1500 0080
11
Disengagement Shaft
51
Hex Nut M4
12
Cam Spring
53
Clamp Washer
13
Limits Cam Guide
54
Special Washer
14
Limit Cam Green-Limit Cam Red
55
Flat Washer I.D.5
15
Plastic Base
56
Hex Nut W/Int Tooth Washer M5
16
Clamp
57
Identity Label
17
Gear Motor Assy 710-2
58
Warning Label
18
Worm Shaft 2
60
Pinion 122523
19
Gear 1
60A
Self Lock Ext Washer 706-2
20
Limits Shaft
61
Cable Clamp ACC-2.5 (5/16")
21
Board Support
62
Microswitch CX Harness
22
Helical Gear 2610
63
Power Cord 1.5m W2PIN+1 Ring
23
Internal Gear
64
Logo Label Left
24
Main Cover
65
Cord Label
25
Light Diffuser
66
Taptite Screw 'P' M3.5x10
26
Board Cover
67
Taptite Screw 'P' M4x6
27
Control Board CB-7 V-4.01
68
Hex Head Screw M6x55
28
Worm Support
69
Spring Washer M6
29
Limits Bush
70
Washer Rubber 58.8x8.8x1
30
Controls Label
71
Washer Cup 55.5x7.2Hx1T
31
Logo Label Right
72
Hex Nut M6
32
Clamp Assy GDO-4
73
Sel-Lok Spring Pin f2.5x14
33
E Ring M8
74
Sensor Disc
34
Capacitor Polyfilm 0.1 UF x 2 275 VAC
75
Sensor Assy
35
Disengagement Cap
76
Gearbox Cover 7
36
Separated HD. Screw W/Washer M4x12
77
Helical Gear 6510-3 CX Assy
Transformer 100VA-05544 TDB-100-03
78
Globe 24V/15W 15x44
Transformer TDB-100-03 Kit
80
Transmitter GB PTX-4
38
Terminal Block 500/02DS 2 POS
83
Alkaline Battery A23 12V
39
Cord Grip Gromet SB-6R-3
37 37A
See next page for spare parts diagram...
RP 07/06
Easylifter
™
Product Code
062113 rolling Door Opener
Spare parts:
Easylifter
™
Product Code
062113 rolling Door Opener
Notes:
RP 07/06