3 minute read

PRESSURE’S ON

Next Article
END-TO-END

END-TO-END

Standards remain one of the most predominant challenges in additive manufacturing (AM), particularly in those highly regulated industries the technology best serves. Speaking to TCT Magazine last year with regards to the energy sector, Shell’s 3D Printing Technology Manager Angeline Goh shared how organizations responsible for setting international standards and legislation are “still playing catch up” when it comes to AM parts, but a recent milestone with LRQA (formerly Lloyd's Register) could help to speed things along.

The oil and gas giant recently worked with the global assurance provider to successfully certify a 3D printed pressure vessel in accordance with the European Pressure Equipment Directive (PED). The project, a fi rst for the industry, underwent four stages over four years starting with the design, through to facility qualifi cation and printing, defi ning acceptance criteria, and culminating last year with testing and inspection.

To date, standards and legislation for AM pressure retaining parts have been lacking, and the need for regulations has generally prevented 3D printed pressure equipment from being permitted. The goal behind this project was to create a proof point that could inform the energy industry’s trust in AM for future applications. It also emphasizes the “just-in-time as opposed to just-incase” method of part sourcing Goh also spoke about last year as Shell explores alternatives to the purchasing and storing of spares.

The vessel has been designed for pressures up to 220 bar and was manufactured at Shell’s Energy Transition Campus in Amsterdam using Powder Bed Fusion. While this CE stamp represents a signifi cant breakthrough for the energy sector, in a more recent Q&A with TCT, Goh says there’s still a way to go.

Goh said: “The knowledge and data that we have gained in this process is valuable for engaging with standards bodies and improving the sector’s trust in additive manufacturing. It will allow us, eventually, to further increase the scope of our inventory for just in time manufacture instead of stocking, as well as increase our scope in novel design and applications critical to our asset’s eff orts to reduce operational emissions of greenhouse gases.”

Shell shared the three main challenges that arose during this project. The fi rst was primary material approval, which meant printing test specimens alongside the pressure vessel to test and approve material properties before formal approval through the Particular Material Appraisal (PMA) process.

Goh explained: “Unlike material bought in batches, tested upfront, with 3D printing, the part is created as the material is printed. Therefore, the formed material must be certifi ed after the pressure vessel is already produced.”

They also had to defi ne inspection protocols that would catch defects caused by AM’s own “unique fl aws.” This included printing a dummy vessel featuring deliberate defects and using a range of CT scanning, dye penetrant testing and other non-destructive techniques to observe hard to detect fl aws. Due to those unique defects, the usual acceptance criteria for welded pressure vessels was deemed unsuitable by the certifi er so the team had to model intentional fl aws on the vessel's performance to help defi ne maximum acceptable defects.

“The sector is still lacking general acceptance criteria for defects in 3D printed pressure vessels,” Goh elaborated. “It took a lot of R&D time and eff ort from Shell and LRQA to be confi dent with the fi nal product. Still, more data must be collected and shared by part producers for standards setting bodies to defi ne general acceptance criteria for defects in 3D printed pressure vessels which can be adopted by certifi ers in Europe and globally.”

Data from this project can be utilized to support eff orts to defi ne standards for 3D printed pressure vessels under the EN 13445 - Unfi red Pressure Vessels standard. Shell is now exploring the use of printing pressure-retaining parts for its own experimental installation, focusing on R&D and design and process optimization “to improve the economy of printing critical parts, rather than large scale manufacturing.” However, while the company says it will have more projects to showcase in the coming months, there are no immediate plans to get more parts certifi ed. For now, more data, and sharing of that data, is required.

Goh concluded: “We hope other companies, research institutes and companies who have invested in similar research also see the value of sharing their learnings with standard setting bodies.”

WORDS: Laura Griffiths

SHOWN:

3D PRINTED PRESSURE VESSEL CERTIFIED IN ACCORDANCE WITH THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE (CREDIT: SHELL)

This article is from: