April 2015 TDMAW Surgeons of Steel

Page 1

April 2015 - Volume 9; Issue 4

SURGEONS of STEEL

In this Issue Charting Progress in Closing Skills Gap Will Your Website Be Labeled “Irrelevant” After April 21st? Proactive Network Security, Backup & Recovery, and More: 6 Factors to Consider to Ensure You’re Protected WMC Tax Policy Agenda


President's Letter

TDMAW was represented at Business Day in Madison 2015, by:(L-R) Kirk Kussman of Aztalan Engineering, Mary Wehrheim of Stanek Tool Corp, Randy Weber of DACO PrecisionTool, Steve Latus of Journeymen Tool & Technologies, Lynn and Ken Mahuta of Mahuta Tool and Brian Nuetzel of Matzel Manufacturing.

April 2015 “Manufacturing Matters”

I

’m happy to hear most TDMAW members that I talk to, continue to be busy. Hopeful-

the future business climate in Wisconsin. He into action for future elections. Last month seven TDMAW members Matters”

at

the

Monona

Terrace

many other people that came from all

Yours truly, — Randy A. Weber

TDMAW Headquarters W175 N11117 Stonewood Drive, Suite 204, Germantown, WI 53022, 262.532.2440 Phone | 262.532.2430 Fax toolmaker@tdmaw.org | www.tdmaw.org

2 | TDMAW HQ 262-532-2440

www.TDMAW.org


2015 Board of Directors President - Randy Weber Daco Precision-Tool 262.626.6591 | randy@daco-precision.com Vice President - Brian Nuetzel Matzel Manufacturing, Inc. 414.466.3800 | Briann@mzmatzel.com Treasurer - Alan Petelinsek Power Test, Inc. 262.252.4301 | alan@pwrtst.com Secretary - Kirk Kussman Aztalan Engineering Inc. 920.648-3411 | kkussman@aztalan.com Chairman of the Board - Steve Latus Journeymen Tool & Technologies, Inc. 414.228.8338 | steve@journeymentool.com

2015 Committee Chairs Advisory Co-Chairs Jim Persik 262.781.3190 | jim@milfab.com Mary Wehrheim 262.786.0120 l mwehrheim@stanektool.com Apprenticeship Co-Chairs Mary Wehrheim 262.786.0120 | mwehrheim@stanektool.com Allen Weiss 262.820.3400 | aweiss@integritywireedm.com Budget Alan Petelinsek 262.252.4301 | alan@pwrtst.com

Save the Dates 2015 May 5th [Tuesday]

Dinner Meeting featuring Federated Insurance & Ma Baensch

Delafield Brewhaus 6:00-8:30 p.m.

June 16th [Tuesday]

June Outing: Annual Golf and Fishing Outing

River Club of Mequon/ Lake Michigan

August 4th [Tuesday]

Summer Outing: Sporting Clays Event and Dinner

Wern Valley Sportsman’s Club

Nov. 10th [Tuesday]

Tool, Die & Machining Expo TBD

CLASSIFIEDS Wisconsin Engraving Company / UNITEX has added two new HAAS VM-2 machining centers to our equipment list. Machines feature 12,000 RPM spindles, 4th axis machining capabilities and 30” x 20” x 20” of travel. Call 262-786-4521 or E-mail: info@wi-engraving.com For Sale: ELB Surface Grinder: Max Length 23 5/8 feet, Max Width 13 3/4 feet, Max height 20". Asking $4,000 or best offer. Please contact Ron Tritz at 262-544-5454 or rontritz@centralmachine.com For Sale: Dual Pallet Horizontal Machining Center: X=26 3/8, Y=13 7/16, Z=13 1/2. Asking $40,000 or best offer. Please contact Ron Tritz at 262-544-5454 or rontritz@centralmachine.com Hypneumat, Inc. has added a new Tsugami M08SY 6-axis turning center to its equipment list. This twin spindle machine is capable of chucking up to 8” diameters and bar feed 2.5” diameters. Machining requests call 414-423-7400 or email johnweber@hypneumat.com.

Business Support Brian Nuetzel 414.466.3800 | Briann@mzmatzel.com Insurance Kirk Kussman 920.648.3411 | kkussman@aztalan.com Legislative Kathy Pfannerstill 262.250.7640 | kathy@toolcraft.com Membership/Programs/Events Randy Weber 262.626.6591 | randy@daco-precision.com Nominating Steve Latus 414.228.8338 | steve@journeymentool.com Promotions Lynn Mahuta 262.502.4100 | lynn@mahutatool.com Scholarship Steve Latus 414.228.8338 | steve@journeymentool.com

2015 Ad Hoc Committee Chairs Communications & Technology Austin Weber 262.626.6591 | austin@daco-precision.com Workforce Development Michael Mallwitz 414.362.7305 | mmallwitz@buschprecision.com

IN THE KNOW Volunteers Needed!

1. Help is needed for the May 9th BotsIQ WI Competition, to be held at WCTC Pewaukee Campus. See details on page 18. Contact Lynn Mahuta to volunteer: (262) 502-4100 or lynn@mahutatool.com. 2. Judges are needed, throughout April, for the SkillsUSA Wisconsin CNC Milling and Automated Manufacturing Technically (AMT) competitions. See details on page 5. Contact Allen Weiss to volunteer: 262-820-3400 or aweiss@integritywireedm.com. 3. Brian Nuetzel, TDMAW Business Support Committee Chair could use 2 or 3 volunteers to join & help him on his committee. The Business Support Committee only meets every other month, unless something urgent is needed. Please contact Brian if you or one of your key employees is interested in helping: (414) 466-3800 or Briann@mzmatzel.com. 4. TDMAW is always looking for more people with new, fresh ideas, so if you know of any members, or potential future members that want to get involved and help in any way, contact TDMAW President, Randy Weber: (262) 626-6591 or randy@daco-precision.com. We could use help on committees, with events, and are looking for those interested in serving on future Boards. Busch Precision will be hosting a Machining & Maintenance Services Expo and Open House on Wednesday, May 6, 2015 to introduce areas of specialty machining and maintenance services that can enhance your quality and production results. Be sure to mark the date on your calendar. The day will be filled with tours, learning sessions, and strategic partner informative sessions. Contact Busch Precision for more information.

toolmaker@TDMAW.org | 3


THE MORRIS ADVANTAGE

World Class Technology and Complete Solutions Morris Midwest brings machine tools, tooling and accessories, and engineering and support services together for you. We source and integrate virtually everything you need to optimize machine tool performance. Our custom turnkey solutions are found in automotive, medical, small engine, agriculture, recreational products, energy and other industries. From highly advanced, automated production cells to single unit installations, our goal is to help you achieve greater productivity, higher quality, and improved profitability. Let us help solve your next manufacturing challenge.

Where Customers Come First

262.251.1771 f 262.251.4026

sales@APQprinting.com APQprinting.com N88W15326 Main Street Menomonee Falls, WI 53051

www.mahutatool.com

To learn more, contact us: 9300 West Heather Ave. Milwaukee, WI 53224 (414) 586-0450 www.morrismidwest.com CNC Short Run Turning Chuck capacity up to 25 ½” diameter x 44” Bar fed capacity to 3 ¼” diameter. Vertical Turning Lathe 40” chuck x 29.5” N118 W19137 Bunsen Drive | Germantown, WI 53022 262-502-4100 | E-Mail: sales@mahutatool.com

4 | TDMAW HQ 262-532-2440

www.TDMAW.org


IN THE KNOW

Help Wanted!

Congratulations to TDMAW Partner, Swick Technologies!

The Waukesha County Business Alliance and BizTimes Media have announced the 2015 Top 10 Businesses of the Year. The annual awards program recognizes companies headquartered in southeastern Wisconsin that have demonstrated consistent financial growth and dedication to good business practices through employee relations, customer-focused commitment and community service involvement. Among the Top 10 Businesses of the Year is TDMAW Partner, Swick Technologies, an IT managed services business.

Consider TDMAW Sponsorship

Your company’s participation in the TDMAW Red, White & Blue Sponsorship program demonstrates to the tool, die & machining community that your company supports Growing Manufacturing in Wisconsin. Sponsorship runs from May 1, 2015 to April 30, 2016 and is a great opportunity to showcase your products, services or organization to a targeted audience of privately held, Wisconsin based manufacturing companies. Benefits include, but are not limited to: recognition at TDMAW meetings and events, complimentary ad space in the Surgeons of Steel magazine and links to your company website from TDMAW.org. Contact TDMAW headquarters for more information TODAY! ToolMaker@tdmaw.org

have to complete their tasks.

SUNDAY

MONDAY

TUESDAY

WEDNESDAY

THURSDAY

FRIDAY

SATURDAY

March 30

March 31

April 1

April 2

April 3

April 4

April 6

April 7

April 8

April 9

April 10

April 11

April 15

April 16

April 17

April 18

Mid-State Tech College CNC 3X 8am-12noon Judge Allen Weiss

WCTC AMT 1X 1pm-5pm Judge TBD

Madison Area Tech College AMT 3X CNC 1X

Judge TBD=To BE Determined

April 5

Moraine Park AMT 1X 8am-12noon Ken Heins

April 12

April 13

April 14

New Richmond HS CNC 1X 1pm-5pm Judge Allen Weiss

8am-12noon Judge Allen Weiss

Germantown HS AMT 1X 1pm-5pm Judge Lynn Mahuta

April 19

April 26

Locations across the Upper Midwest:

Milwaukee Wausau Merrill Minneapolis

April 20

April 21

April 22

April 23

April 24

Watertown HS AMT 1X 8am-12noon Judge TBD CNC 2X 12:30-4:30pm Judge TBD

Oak Creek HS CNC 1X 1pm-5pm Judge TBD

Northeast WI Tech AMT 3X 7:30am-11:30am CNC 3X 10:30am-3:30pm Judge Allen Weiss

Hartford Union HS AMT 1X 8am-12noon Judge Mike Kearney

April 27

April 28

Bonduel HS CNC 3X 7:30am-3:30pm Judge Allen Weiss West Bend HS CNC 1X 8am-12noon Judge Steve Latus Slinger HS AMT 1X 8am-12noon Judge Ken Mahuta

Grade projects

Alliant Energy Center

No test Allowed

April 29

Alliant Energy Center Written Test Room to Follow 9:00am to 10:45am AMT Secondary 10:45am to 12:30pm CNC Secondary and Post-Secondary 12:30pm to 2:15pm AMT Post-Secondary

April 25

Beloit Memorial HS CNC 1X 1pm-5pm Judge TBD

Ashwaubenon HS AMT 1X at NWTC 3:30pm-7:30pm Judge Allen Weiss

April 30

Wed April 29 Alliant Energy Center 8:45am to 3:00pm

Judges #1 Allen Weiss #2 Ken Mahuta #3 Andy Nolen

toolmaker@TDMAW.org | 5


John Hazod President & CEO

Schenck M&A Solutions Advisory with a focus on transactions up to $100MM

t 4BMFT EJWFTUJUVSFT t "DRVJTJUJPOT t $BMDVMBUJPOT PG WBMVF

t 3FDBQJUBMJ[BUJPOT .#0T t 'JOBODJBM EVF EJMJHFODF t 1SFQBSBUJPO GPS TBMF

Contacts:

REDUCE YOUR TOOLING SPEND BY 20% OR MORE WITH AN AUTOCRIB TOOL MANAGEMENT SYSTEM FROM

$PSFZ 7BOEFSQPFM t "OO )BOOB t

schencksc.com/mergeradvisors 4FDVSJUJFT PòFSFE UISPVHI #VSDI $PNQBOZ *OD NFNCFS '*/3" 4J1$ #VSDI $PNQBOZ BOE 4DIFODL . " 4PMVUJPOT BSF OPU BóMJBUFE FOUJUJFT "OO )BOOB BOE $PSFZ 7BOEFSQPFM PG 4DIFODL . " 4PMVUJPOT BSF SFHJTUFSFE JOWFTUNFOU CBOLJOH SFQSFTFOUBUJWFT XJUI #VSDI $PNQBOZ

Innovative tool dispensing solutions giving YOU control, not your supplier. Companies that utilize an AUTOCRIB system typically experience... â—† Reduce Item Usage 20% or more â—† Reduce Inventory Levels â—† Control 2nd & 3rd Shift Tool Usage â—† Reduce Walk-Around / Trip Time â—† Reduce Receiving Costs â—† Eliminate Obsolete Parts â—† Reduced Shipping & Expediting Costs

BELL WELL SALES CO S TOC KIN G DIS TRIBUTOR

Contact your ApTex Salesperson or our VMI Specialists for more info!

Mark Meier

Sandi Melville

414.915.1073 markm@aptexinc.com

414.350.5803 melville@aptexinc.com

262.548.8960 aptexinc.com

W227 N878 Westmound Dr. Waukesha, WI 53187

6 | TDMAW HQ 262-532-2440

Roxanne Mueller

920.366.1362 mueller@aptexinc.com

|

|

www.bellwellsales.com www.TDMAW.org


Charting Progress in Closing Skills Gap Case

in

point, Ashley

Furniture

in part because of a lack of workers. The pursue them. Wisconsin manufacturers now have a reliable pipeline of workers to replace

Wisconsin’s unemployment rate is still

that isn’t the case, at least in some parts the Wisconsin Department of Workforce

WMC will continue to work on

chambers of commerce. its top two priorities.

cooperation

between

In fact, WMC

manufacturers

the economy can’t improve, at least not to its full potential.

Submitted by: By Kurt R. Bauer, President/ CEO, Wisconsin Manufacturers & Commerce – Wisconsin’s Chamber

toolmaker@TDMAW.org | 7


Our waste services include:

UÊÊ->viÊÌÀ> ë ÀÌ]ÊÌÀi>Ì i ÌÊ> `Ê` ë Ã> Ê vÊ >â>À` ÕÃÊyÊÕ `à UÊÊ Là ÀLi ÌÃÊ Ûi Ì ÀÞÊ> `Ê` ë Ã> Ê «À }À> UÊ Õ ÞÊ Vi Ãi`Ê Ê7 ÃV à Ê> `Ê Ã Our fluid services include:

UÊ Õ `Ê > Ìi > ViÊ> `Ê >V iÊV i> } UÊÊ iÌ> Ü À }ÊyÊÕ `ÊV ÃÕ Ì>Ì ]Ê ÌiÃÌ }]Ê> `Ê«À L i ÊÃ Û } UÊÊ ÊvÕ Ê iÊ vÊV > ÌÃ]Ê ÕLÀ V>Ì }Ê Ã]Ê V i> iÀÃÊ> `Ê,*½Ã

Call us for more information: 920-783-6600

ICE TOOLS

A DIVISION OF SUSSEX TOOL & SUPPLY 19967 WEST MAIN STREET LANNON WI 53046 P 262-251-4020 F 262-251-4181 Email : ice@sussextool.com

8 | TDMAW HQ 262-532-2440

www.TDMAW.org


Will Your Website Be Labeled

I completely out of character… they’ve

or be irrelevant.

Dedicated to the art of waterjet cutting We don’t compete with you! No welding, grinding or fabricating Machine capacity of 6 ft. x 12 ft. All work guaranteed

(262) 347-1685 will this huge change

with wKnow your options. this critical conversation with your

Providing Industry with the highest quality products and customer service to meet today’s demanding manufacturing requirements!

Talk to your team.

Start

taking

active

steps

now. » Automation & Machinery » Die / Stamping / Fabrication

» Mold / Tool Room / Maint.

optimum solution for your business’

» Clamping & Fixturing

be a reliable resource. Dee Jensen Cultivate Communications

» Part & Tag Marking

» Laser Marking

www.elsimeth.com 403 S. Hawley Road, Milwaukee, WI 53214 Toll Free: 800.837.9270 | Fax: 414.771.9043

toolmaker@TDMAW.org | 9


Termination, discharge: What are the requirements for notice to employees over the age of 40? Question: We have a current employee who has been

with the company for 8 years in a Director role. We are considering outsourcing the work he does along with all IT work. I know we can go ahead and lay him off due to these business decisions and we would be putting together a separation agreement. My concern is that I read recently that anyone over the age of 40 is to be given the separation agreement at least 21 days in advance of the separation. True? We are concerned because he does have security controls, etc. and if we give him this advance notice - we are not sure what damage he might do to the company.

Response: If an employee is 40 years of age or older,

any separation agreement that seeks to release claims under the Age Discrimination in Employment Act (ADEA) must contain specific language as required by the Older Workers Benefit Protection Act (OWBPA) in order to be a proper, valid and enforceable release (see http://www.eeoc. gov/policy/docs/qanda_severance-agreements.html for specific guidance). You are correct that an employee age 40 and older must be given 21 days to consider a waiver and release agreement, and then an additional seven days once signed (if signed within that time period), to revoke his or her signature and thus the contract itself. There are other requirements that must be satisfied when more than one employee is separating from employment (such as providing information about the ages and positions of employees impacted by a layoff and not impacted by the termination decisions, and a 45-day consideration period), but we assume from the inquiry that only one employee is at issue here (the Director). Note that employers are not required to provide employees under 40 with a specific amount of time to sign a separation agreement and there is no revocation period required in that situation.

Call our

As to your concern regarding providing "advance notice" to the subject employee, the 21-day waiting period is solely for purposes of the employee executing the separation agreement. In other words, the employer does not need to give an employee advanced notice as to his or her last day of work. Indeed, the employer can include in the separation agreement that the last day of work is effective immediately requiring him to return all company property, etc. (assuming employment is at-will and no other contract governs the issue) and the employee could still have the 21-day consideration period to decide whether to accept the terms of the separation agreement (albeit the employee would spend this consideration period at home or away from work as he would no longer be employed). For more information on obligations under the OWBPA in severance agreements, please see http://www.eeoc. gov/policy/docs/qanda_severance-agreements.html and we also recommend that the employer consult with local counsel for guidance in drafting a separation agreement (or to at least review what the employer has endeavored to draft itself) to ensure it meets the employer's objectives while remaining compliant with applicable laws. Š 2014 Advisors Law Group, All Rights Reserved To learn more about the Federated Employment Practices NetworkSM, contact your local Federated Marketing Representative, or visit www.federatedinsurance.com.

! er n t ar p n o i t a i c asso XXX GFEFSBUFEJOTVSBODF DPN

Federated Mutual IOTVSBODF $PNQBOZ r 'FEFSBUFE 4FSWJDF Insurance Company r 'FEFSBUFE -JGF Insurance Company Owatonna, Minnesota 55060 | Phone 507.455.5200 | www.federatedinsurance.com *Not licensed in the states of NH, NJ, and VT. Š 2015 Federated Mutual Insurance Company

10 | TDMAW HQ 262-532-2440

www.TDMAW.org


Federated Insurance Texting + Driving = Danger

AWTTW – A word to the wise

se

Here we go again! phones in vehicles.

BION – Believe it or not Takes Center Stage Tornado Preparedness Safety tips for cell phone use in vehicles Preliminary estimates for 2012 by the National Oceanic Atmospheric Association (NOAA) report more than 900 tornadoes—22 of which were “killer tornadoes.” From droughts to floods to temperature extremes, it seems that weather systems are upside down all over the country. January 2012 was an unusually violent month for severe weather, with more than 70 tornadoes reported. Unfortunately, extreme weather is becoming more commonplace: Over the past three years, the United States has averaged more than 1,300 tornadoes.1 Deaths and property damage from tornadoes are not limited to the most severe storms: 109 people were killed in 2011 by storms rated EF3 or lower.2 So what can we do? In a word, PREPARE! Tornado season lasts from March to August, but tornadoes can occur year-round. More than 80 percent of tornados occur between noon and midnight, and one quarter from p.m. to 6:00 p.m. Tornadoes are most likely to occur between EOMoccur – End of4:00 Message 4:00 p.m. and 9:00 p.m. While tornadoes have been reported in every state, they are most prevalent in the area known as “Tornado Alley,” which includes states located between the Rocky Mountains and Appalachians. Tornado strength is measured on the Enhanced Fujita (EF) Intensity Scale, which correlates damage with wind speed. The scale has six wind-damage levels, as shown on the accompanying chart. Operational EF Scale EF Number 0 1 2 3 4 5

How can you prepare for a tornado? Plan with a PURPOSE Although tornadoes have been reported throughout the United States, some areas are clearly at higher risk than others.

As a leader in supply

3-Second Gust (mph) 65-85 86-110 111-135 136-165 166-200 Over 200

Identify a “safe” room where others can gather during a tornado. In the chain by solutions, wein at MSC Joplin, Missouri, storms of 2011, people survived taking shelter a walk-in cooler. Whatever you designate as your safe believe room, it should be determined in local peoplebefore you need it. Examine your property— both your home and business—and create a plan. A basement location away from all windows is preferable. If there is no local problems. basement, an interior hallway or room on thesolving lowest floor is best. A nearby sturdy building is another option. Once you designate a safe room, consider having it reinforced, if possible, for additional protection.

262.347.0639

|

Pewaukee, WI

mscdirect.com

.

It’s Our Business to Protect Yours® .... ….. ......................

..............................

This publication is intended to provide general recommendations regarding risk prevention. It is not intended to include all steps or processes necessary to adequately protect you, your business, or your customers. You should always consult your personal attorney and insurance advisor for advice unique to you and your business. © 2012 Federated Mutual Insurance Company. All rights reserved. Federated Mutual Insurance Company Federated Service Insurance Company* Federated Life Insurance Company www.federatedinsurance.com *Federated Service Insurance Company is not licensed in the states of NH, NJ, RI, and VT.

toolmaker@TDMAW.org | 11


Proactive Network Security, Backup & Recovery, and More: 6 Factors to Consider to Ensure You’re Protected

T

-

-

happen to me� mentality. -

-

-

when it comes to this approach. Ask any security IT profession-

-

business. -

12 | TDMAW HQ 262-532-2440

www.TDMAW.org


to ensure your company is freely com-

-

with new potential system access points

-

cation security breaches. -

Industry Expertise, Customized Solutions

Accounting // Advisory // Investment Banking Supply Chain // Technology // Managed Services

When it comes to your company’s network -

Call 262.754.9400 or visit www.sikich.com.

network security. With as many options overcome them, the best solution for any company is to choose a comprehensive network security plan that’s custom-built

Submitted by Swick Technoloiges, TDMAW Group Buying Partner

Securities are offered through Sikich Corporate Finance LLC, a registered broker dealer with the Securities Exchange Commission and member of FINRA/SIPC.

Lock it down. When there are wolves at the doorstep of your hen house, you need to shut the door and lock it down. SWICKtech protects your IT infrastructure! Call today and ask us about the TDMAW member specials.

15700 W. Cleveland Ave., New Berlin, WI 53151 414.257.9266 | SWICKtech.com

toolmaker@TDMAW.org | 13


TDMAW Midwinter BASH!

I

for this time of the year. The atmosphere in the private room was also really nice, with

been for me. Submitted by TDMAW President, Randy Weber of DACO Precision-Tool

Scholarship Money Available!

T

fall semester

14 | TDMAW HQ 262-532-2440

www.TDMAW.org


WMC Tax Policy Agenda

Legistative Update

Elimination of Personal Property Tax and Statement of Personal Property/Form M-P

T

It is important to note that the total personal property value

statement of personal property.

FOR ALL OF YOUR MACHINE SHOP’S NEEDS MACHINING & MAINTENANCE SERVICES

ALIGNMENT . BALANCING . BORING . CNC RETROFITTING . MACHINE TOOL REPAIR . MACHINING . MAINTENANCE SERVICES . PRECISION TOOLING . PREVENTATIVE MAINTENANCE . AND MUCH MORE... AUTHORIZED CNC EXPERTS:

Before Mori Seiki Slant Bed Lathe Realignment

After Norton Grinder Machine Rebuild

System Integrator

Solution Partner

toolmaker@TDMAW.org | 15


EMPLOYER BENEFITS: Employer of Record & Payroll Processing covered by WOW WDI!

2015 Summer Internship Program

100% of Workers Compensation covered by WOW WDI!

The Summer Internship Program provides youth between the ages of 16 and 21 in Waukesha, Ozaukee and Washington Counties with paid summer employment. Youth are matched with worksites based upon needs, interests and geographic location. Private and Public Sector businesses are eligible to participate in the 2015 Summer Internship Program. 100% of the wages and Worker’s Compensation insurance is paid by WOW Workforce Development, Inc.

On-the-job training (OJT) incentive opportunities may be available upon successful completion of the internship!

Attention! Seeking all employers and community-based organizations who are interested in providing an internship to a young adult with limited work experience to maximize their employment opportunities through workforce readiness training!

2015 Summer Internship Program Details: Program runs from June 15 - August 21, 2015 Young adults are between the ages of 16-21

Minimal paperwork to complete! Unique opportunity to mentor future leaders within our community!

CONTACT: Lisa Roohr

Interns are paid $8.00/hour

ERU Administrative Assistant

Interns may work up to 240 hours per internship

892 Main Street, Pewaukee T: 262.695.7894

100% of wages are covered by WOW Workforce Development, E: lroohr@wctc.edu Inc. (WOW WDI)

In addition, there is minimal paperwork for employers to complete! Contact Lisa Roohr for more information, lroohr@wctc.edu

VRS or IP Relay

Contact the WOW Workforce Development Employer Relations Unit NOW to learn how you can participate!

FOLLOW US

Help Develop Tomorrow’s Workforce!

facebook.com/WOWWDB twitter.com/WOWWDB wfdc.org

Internships are funded through the US Department of Labor, Workforce Investment Act and Wisconsin’s Division of Vocational Rehabilitation, administered by WOW Workforce Development, Inc., an equal opportunity employer and program provider.

16 | TDMAW HQ 262-532-2440

Eager Engineering Students Seeking Internships NADCA has a resume database of engineering students looking for summer internships on its Web site, and has just added 14 more candidates. Please consider hiring an intern and introducing that student to the world of die casting! Students from universities ranging from University of Maine to California Poly are currently seeking positions. To review the available candidates, visit www.diecasting.org/scholarship/ resumes. Please feel free to contact them directly, and if you hire a student, let us know via intern@diecasting. org, so we can limit their contact information. Students that complete an internship in die casting are eligible to apply for the David Laine Scholarship Program. Additional information about scholarships and hiring interns can be found via: www.diecasting.org/ scholarship.

www.TDMAW.org


APR 2015 — VOL 12 — ISSUE 4

5 Smart Tips To Know Before Moving Your Data To A Cloud-Based Application

TOOL STEEL | HIGH SPEED | ALLOYS | STAINLESS POWDER METALS | GRINDING | BORING

OUR STRENGTH IS

OUR CUSTOMERS

SINCE 1976

1

c

Up! -

2 M

A

-

Cop -

-

-

Rockford, IL | P 815-226-8800 | 800-435-0717

CinTool.com

3 H

A Pl

4 U

A A

o Acc

-

-

-

-

Business Bankers Helping Your Business Succeed.

ppo u

o Do om Hou

p

-

P

Mo

-

John Schmitz

-

Call Us Today To Schedule Your Cloud Readiness Assessment. This service (normally $497) is FREE to you through April 30th!

www.manage-point.com/cloudready Vice President Commercial Loan Officer Waukesha 262.446.8103

citizenbank.com GREENDALE, WISCONSIN USA

CALIBRATION SERVICES Oshkosh, WI (920) 426-5894 foxvalleymetrology.com

ISO/IEC 17025 Accredited On-site/Field Calibration Repair Services Product Sales Hard Gaging Torque Equipment Hand Tools Electronics

FREE ONLINE CALIBRATION MANAGEMENT

Trust Trust Kinetic Kinetic For For All All Your Your

Grinding, Milling, Heat-Treating, Laser-Cutting and Wire EDM Needs • Unparalleled quality and service • Decades of manufacturing experience • Serving the steel, paper, packaging, power generation, machine tool, mold and die, material handling, and food processing industries P.O. Box 200 • Greendale, Wisconsin 53129-0200 USA Phone +1 414-425-8221 • Fax +1 414-425-7927 • knifemaker.com toolmaker@TDMAW.org | 17


Next BotsIQ WI Competition and Your Opportunity to Volunteer, Coming Up on May 9th! The BotsIQ program exposes students and their families to a variety of manufacturing careers. While building their 15 pound robots in preparation for the competition, they are also discovering their attitude and aptitude for advanced manufacturing careers. TDMAW supports BotsIQ WI and invites you to get involved with the May 9th competition, hosted by Waukesha County Technical College, Pewaukee Campus. All are encouraged to come and see the students (you may be hiring in a few years) at work on their creations. Stay for a few battles and then watch them repair the damage. Yu will be impressed, maybe impressed enough to stay for a while or mentor a team!

Interested in volunteering? Contact Lynn Mahuta, of Mahuta Tool for details, lynn@mahutatool.com. Lynn says they will be looking for help with set up on Friday, May 8th, from 2:00 – 4:30 PM, Saturday, May 9th, from 8:00 AM to Noon, Noon to 4:00 PM or come for the whole day! It’s a great way to have some fun and help support the future of Wisconsin manufacturing! BotsIQ WI sponsorship opportunities are also available. See www.TDMAW.org News Alert page for a sponsorship form.

COLUMBIA GRINDING The Flatwork SpecialistsTM

s &LAT (ONING

s $OUBLE $ISC

s ,APPING

s "LANCHARD s $EBURRING

s 3URFACE

ISO 9001 : 2008

414-762-7320 columbiagrinding.com

-

www.manage-point.com 18 | TDMAW HQ 262-532-2440

www.manage-

PH: (414) 456-9837

E: info@manage-point.com www.TDMAW.org


2015

For more information visit tdmaw.org

Partners

Bank—Equipment Loans

Heat Treating ThermTech of Waukesha, Inc.

US Bank

Charles Starck | (920) 791-9089 www.usbank.com

Computer Services for Business

Kirk Springer | (262) 549-1878 www.thermtech.net

Insurance—P&C, Health & Workers Comp Federated Insurance

Swick Technologies

Visit www.federatedinsurance.com for the nearest agent

Gary Swick | (414) 257-9266 www.swicktech.com

Supplies/Full Line

Cutting Tools

E.L Simeth - Milwaukee

Midwest Cutting Tool, Inc. Waukesha

EDM Services

Steve Simeth | (414)771-9270 www.elsimeth.com

Charles Wright / Ronald Abts (262) 896-0883 www.midwestcuttingtools.com

MSC/J&L Metalworking Pewaukee

Sales | (262) 703-4000 www.metalworking.mscdirect.com

K L H Industries, Inc. Germantown

Sussex Tool & Supply - Sussex

Ken Heins | (262) 253-4990 www.klhindustries.com

Sales | (262) 251-4020 www.sussextool.com

Sponsors Accurate Die Design Inc./ Logopress3 Ray Proeber | (262) 938-9316 www.accuratediedesign.com Alro Specialty Metals Wauwatosa Inside Sales | (800) 365-4140 www.alro.com ApTex Waukesha Industrial Peter Delany | (262) 970-4833 www.aptex.biz Bell-Well Sales Co. Tom Schoenecker | (262) 781-3670 www.bellwellsales.com Busch Precision, Inc. Micheal Mallwitz | (414) 362-7305 www.buschprecision.com Cincinnati Tool Steel Co. Ronald Cincinnati | (800) 435-0717 www.cintool.com

Citizens Bank Of Mukwonago John Schmitz I (262) 548-0208 www.citizenbank.com

Haas Factory Outlet Wally Mulvaney | (262) 373-5050 www.hfomilwaukee.com

Progressive Machinery, Inc. John Gennrich | (414) 577-3200 www.progressivemachinerywi.com

Cultivate Communications Dee Jensen | (262) 373-4000 www.cultivatecommunications.com

Industrial Fluid Solutions Sales | (920) 783-6600 www.industrialfluidsolutions.com

Schenck M & A Solutions Corey Vanderpoel | (414) 465-5607 www.schencksc.com/ mergeradvisors

The Dickman Company, Inc./ CORFAC International Dave Hazenfield | (414) 271-6100 www.dickmanrealestate.com Federated Insurance Brock Martinez | (920) 299-0010 www.federatedinsurance.com Foundations Bank Steve Rossmeissel l (262) 746-3969 www.foundationsbank.com Fox Valley Metrology Kit Krabel | (920) 426-5894 www.foxvalleymetrology.com

The Kinetic Co., Inc. Jared or Cash Masters (414) 425-8221 www.KnifeMaker.com ManagePoint LLC David Steger | (414) 456-9837 www.manage-point.com Midwest Forman Metal Co. Marty Forman | (414) 351-5990 www.midwestformanrecycling.com

Sikich LLP Cheryl Aschenbrener (262) 754-9400 www.sikich.com United Milwaukee Scrap Betsy Purcell | (414) 449-4411 www.umswi.com Weller Machinery Mike Weller | (262) 251-1500 www.wellerusa.com

Morris Midwest Walter Weigel | (414) 586-0450 www.morrismidwest.com

toolmaker@TDMAW.org | 19


W175 N11117 Stonewood Drive Suite 204 Germantown, WI 53022

SAVE THE DATES May 5th Annual Meeting

TDMAW Partner, Federated Insurance

TDMAW JUNE OUTING

June 16th Choose from a day of

and special guest

Golf at River Charter Fishing or Club of Mequon on Lake Michigan

Ma Baensch

6:00 pm - 8:30 pm back by popular demand: the delicious pasta bar!

Invited to attend are TDMAW Members, Prospective Members, Partners, Sponsors, other local trade association members and community friends of TDMAW. Contact TDMAW Headquarters for more information. Printed by American Print Quik, Menomonee Falls www.APQprinting.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.