SAVE SAL OF TI O ME W T H IL ASSE MBLI E N G SERT O COUP LING S
USP’S SERTOTOOL/SERTOMATIC: • Pre assembling • Sertotool sizes: 4-10 mm Sertomatic sizes: 10-35 mm • A constant quality, same tightening torque • No friction on the surface due to axial assembly • Ergonomic. Low physical power needed, the Sertomatic is activated with foot switch • Special adapters for constant quality • Easy and fast assembling of larger sized couplings • Timesaving: 30 seconds, compared with traditional method 3 minutes, per assembly with the Sertotool • Saves a lot more time while assembling larger sizes • Suitable for construction areas
Example: 700 couplings per year, means 1400 assemblies. Normal SERTO-tool
Time/assembly:
Assemblies/Hour
Total assembly time
3 min
20
70 Hour
30 sec
120
12 Hour
*Saves 58 hours!
SERTOTOOL
SERTOMATIC
The SERTO pre-assembly tool is driven by compressed air and can be set up easily anywhere due its small size and light weight. Each device has a rotatable tool insert, which is suitable for a specific material (M brass, stainless steel, stainless SOL, etc.) and can not be misplaced.
For assembling larger diameters we prefer to use the SERTOmatic. SERTOmatic is equiped with a strong electro-hydraulic pump which allows fast assembling of all serto couplings. The SERTOmatic is suitable for assembling couplings up to 35 mm diameter.
TEL +31 70 413 07 50 | WWW.TEESING.COM
MA PROD SS U MADE CTION EASY
LATEST IMPROVEMENTS Teesing supplies with serto a complete program of fittings incl. a complete range of tool inserts. Every material and pipe diameter requires it’s own tool insert (see table below). The SERTOtool and SERTOmatic avoid the damaging of the couplings, due to a correct positioning after inserting the pipe connection nut and clamping ring.
Changed 0.4 mm - diameter bolt on thread diameter radiusing 0.2 mm instead of 45 bevel
Levers to the position of nut and clamping ring
Space between nut across corners and holders adjusted to 0.4 mm
bolt material changed from 1.4305 to 1.6582
APPROVED DIMENSIONAL DEVIATIONS Material St 35.4
Outside tolerance ± 0.08 mm
Tolerance thickness ± 0.10 mm
± 0.1 mm
± 0.15 mm
± 0.07 mm ± 0.09 mm ± 0.12 mm ± 0.18 mm ± 0.24 mm ± 0.10 mm ± 0.15 mm ± 0.10 mm
± 0.10 mm
+ 0.10 mm -0.05 mm ± 0.10 mm
± 0.10 mm
± 0.10 mm
± 0.10 mm
6 - 8 mm: +0.13 mm -0.28 mm 10 - 12 mm: + 0.15 mm - 0.30 mm 15 mm: + 0.20 mm - 0.35 mm 4 - 6 mm: ± 0.10 mm 8 - 12 mm: ± 0.15 mm
± 0.10 mm
INOX Cu
PA 11W12W PE PU PTFE PVDF SERTOflex
FEP
3 - 6 mm: 6.35 - 10 mm: 12 - 18 mm: 19.05 - 28 mm: 35 mm: 6 - 10 mm: 12 - 18 mm:
± 0.08 mm ± 0.10 mm
± 0.10 mm
± 0.15 mm
ADDITIONAL SERVICES The SERTOtool and SERTOmatic are available for rent with a compressed air cylinder, so it can be used on any construction area without an electrical power source.
TEL +31 70 413 07 50 | WWW.TEESING.COM