THERMOTUBE ® SL - TUBING
THERMOTUBE ® SL
SL - 4 B 1 35 - ATP JACKET OPTION TYPE
APPLICATION
ATP4 TPU
ThermoTube is a single insulated tube ideally suited to transport hot or cold liquids or gases. It was specifically developed for steam supply and condensate return lines and is also used as an un-heated sample line. ThermoTube is pre-insulated with non-hygroscopic glass fiber, complete with a heat reflective foil wrap and a weatherresistant outer jacket. ThermoTube can be manufactured in a variety of tube materials, wall thicknesses and outer jackets. ThermoTube is supplied in long length coils and can be quickly and easily installed in existing cable trays, angles, channels, struts and I-beams. ThermoTube termination kits protect the ends for a lower installed cost than field insulated tubing
TUBE WALL THICKNESS
NUMBER OF TUBES 1
PROPERTIES • Fast delivery and installation • Long coils minimize waste • Superior weather proofing
TUBE MATERIAL
1
CONSTRUCTION
2
1 2 3 4
3
Tube, per costumer specifications Non-hygroscopic glass fiber insulation Heatreflective wrap polymer outer jackter
4
SPECIFICATIONS Maximum tube temperature
30 = .030” 32 = .032”(COPPER ONLY) 35 = .035” 40 = .040”(PLASTIC ONLY) 47 = .047”(PLASTIC ONLY) 49 = .049” 62 = .062”(PLASTIC ONLY) 65 = .065” 83 = .083”(SS ONLY) 1 = 1 MM 1.5 = 1.5 MM
204°C
Maximum outer jacket temperature
60°C
Minimum installation temperature
40°C
A = As = B = C = D = E = F = Fs = G = H = J = K = M = P = T = X =
316L SS Welded 316Ti SS Welded B68 Copper PFA Teflon 2 Monel 3 Titanium 316L SS Seamless 316Ti SS Seamless 304 SS Welded 304 SS Seamless Hastaloy C276 Alloy 825 FEP Teflon Polyethylene PTFE Teflon Special
TUBE O.D.
* Maximum tube temperature and outer jacket temperature is based on .5” nominal insulation thickness
6 = 6 mm 8 = 8 mm 10 = 10 mm 12 = 12 mm 20 = 20 mm
BUNDLE TYPE
30 | TEESING
250913
250913
SL = Single tube
TUBING | 31