Belt Conveyors

Page 1

Product Data Sheets

Belt Conveyor System


Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Texam Limited’s range of powered belt conveyors is designed for applications where improved load control and speed of operation are important factors. They are particularly useful when a conveyor is required to carry fragile loads or a wide range of load weights or sizes. Level Belt Level belt conveyors are for the horizontal transportation of items and assembly line operations. They are available in lengths from 2m up to 30m in 0.5m increments. They are constructed using cold formed steel and powder coated channels with two bed type options - Monobed and Roller bed. Centre Driven belt speeds 9, 14, 18, 24 and 30m per minute. End Driven by a motorised drum, belt Speeds - 15.6, 18.6 and 21.6m per minute - up to 10m long. Robust and durable 2-ply transmission belt. Level belt conveyors can be used with the majority of package conveyor accessories Low noise operation

Inclined Belt Inclined belt conveyors are used to deliver packages or boxes from one floor to another and when fitted with a reversing control can operate in either direction. They can be used as stand alone units or as integrated elements of a conveyor system. Centre Driven belt speeds 9, 14, 18, 24 and 30m per minute. Robust and durable 2-ply feeder transmission belt and gripface incline belt. Incline belt conveyors can be used with the majority of package conveyor accessories Low noise operation Powered feeder for positive transfer from horizontal to incline. Top curve for smooth transfer from incline to horizontal.

Belt Driven Roller Belt driven roller conveyors are for the horizontal transportation of items and assembly line operations. They are available in lengths from 2m up to 30m in 0.5m increments. They are constructed using cold formed steel and powder coated channels with two bed type options - Live Roller and Accumaflow. Centre Driven belt speeds 9, 14, 18, 24 and 30m per minute. End Driven by a motorised drum, belt Speeds - 15.6, 18.6 and 21.6m per minute Robust and durable 2-ply transmission belt.

8

1


Belt Conveyor System

Texam Limited’s range of powered belt conveyors is designed for applications where improved load control and speed of operation are important factors. They are particularly useful when a conveyor is required to carry fragile loads or a wide range of load weights or sizes. Level Belt conveyors are for the horizontal transportation of items and assembly line operations. They are available in lengths from 2m up to 30m in 0.5m increments They are constructed using cold formed steel and powder coated channels with two bed type options - Monobed and Roller bed. Centre Driven belt speeds 9, 14, 18, 24 and 30m per minute. End Driven by a motorised drum, belt Speeds - 15.6, 18.6 and 21.6m per minute - up to 10m long. Robust and durable 2-ply transmission belt. Level belt conveyors can be used with the majority of package conveyor accessories Low noise operation

2


Belt Conveyor System

Monobed Overall length 250 mm

250 mm

Minimum frame length 1500 mm Direction of travel

260 mm

Back to back + 70 mm

Back to back - 50 mm

90 35

The conveyor belt is supported on a steel panel bolted between the side channels for smooth snag-free transportation of loads where loads are placed on the conveyor. Available widths 300, 400, 450, 500, 600, 800mm

Belt speeds of 15.6,18.6 and 21.6m/min (end drive)

Lengths 2m up to 30m

Belt width 250, 350, 400, 450, 550, 750mm

Belt speeds of 9, 14, 18, 24 and 30m/min (centre drive) Monobed 250 mm

Overall length Minimum frame length 1500 mm

250 mm

Direction of travel

260 mm

Back to back + 70 mm Back to back Back to back - 50 mm

90

35

The conveyor belt is supported on 50mm diameter rollers for reduced friction and enables longer conveyor runs. Available widths 300, 400, 450, 500, 600, 800mm Lengths 2m up to 30m Belt speeds of 9, 14, 18, 24 and 30m/min (centre drive)

Belt speeds of 15.6,18.6 and 21.6m/min (end drive) Belt width 250, 350, 400, 450, 550, 750mm

3


Belt Conveyor System

Inclined belt conveyors are used to deliver packages or boxes from one oor to another and when ďŹ tted with a reversing control can operate in either direction. They can be used as stand alone units or as integrated elements of a conveyor system. Centre Driven belt speeds 9, 14, 18, 24 and 30m per minute. Robust and durable 2-ply feeder transmission belt and gripface incline belt. Incline belt conveyors can be used with the majority of package conveyor accessories Low noise operation Powered feeder for positive transfer from horizontal to incline. Top curve for smooth transfer from incline to horizontal.

4


Belt Conveyor System

In order to provide the maximum surface friction, the belt is of special composition to efficiently convey goods on an incline which would normally be 20°, 25° or 30°. The short, horizontal powered feeder at the lower end and the top curve at the upper end, ensure an easy transition of the loads to, or from the incline. Gravity or powered roller conveyor extensions can be added to either top or bottom levels.

To provide maximum strength with the least possible weight, the conveyor framework is created by bolting two ‘C’ section channels (90mm x 35mm x 2.5mm) back to back using square hollow section crossties. 50mm diameter rollers or steel panels are fitted between the channels to create a roller or mono bed base beneath the belt.

Standard Belt Speeds Available - with 0.75kw and Standard Conveyor Widths 1.5kw braked drive units 9m, 14m, 18m, 24m and 30m 300mm, 400mm, 450mm, 500mm, 600mm and 800mm per minute. back to back (BB). (Overall width = BB + 70mm.) Feeder length Underguards are fitted as standard to a height of 2500mm 750mm for 300mm to 500mm width. 1250mm for 600mm and 800mm width. above floor level. The drive pack is underslung and sited near the lower end for ease of installation and accessibility they are available in 3 phase or single phase options. A brake motor is fitted to counter the tendency of a loaded belt to be driven backwards by the weight of loads on the belt when the power is switched off. Overall Length Length 'L'

Feeder Length

250

Top Curve Assembly

Lift

Centre Drive Feeder Unit

Lift Height 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50

20° Length ‘L’ (m) Actual Angle 4.90 19° 8’ 5.34 20° 10’ 6.32 19° 13’ 6.76 20° 0’ 7.73 19° 16’ 8.17 19° 54’ 8.61 20° 29’ 9.59 19° 50’ 10.03 20° 20’ 11.00 19° 47’ 11.44 20° 13’ 12.42 19° 45’ 12.86 20° 8’

25° 30° Length ‘L’ (m) Actual Angle Length ‘L’ (m) Actual Angle 3.83 24° 46’ 3.28 29° 6’ 4.27 25° 24’ 3.71 29° 14’ 4.70 25° 54’ 4.14 29° 19’ 5.69 23° 37’ 4.58 29° 24’ 6.12 24° 17’ 5.01 29° 27’ 6.56 24° 42’ 5.44 29° 30’ 6.99 25° 4’ 5.88 29° 33’ 7.43 25° 23’ 6.31 29° 35’ 7.86 25° 40’ 6.74 29° 37’ 8.85 24° 24’ 7.18 29° 38’ 9.28 24° 41’ 7.61 29° 39’ 9.72 24° 56’ 8.04 29° 41’ 10.16 25° 10’ 8.47 29° 42’ 5


Belt Conveyor System

Powered belt driven roller conveyors is designed for applications where a cost effective solution is required with the capability of a single drive unit powering up to 30 metres of conveyor. Belt driven roller conveyors are for the horizontal transportation of items and assembly line operations. They are available in lengths from 2m up to 30m in 0.5m increments. They are constructed using cold formed steel and powder coated channels with two bed type options - Live Roller and Accumaow. Centre Driven belt speeds 9, 14, 18, 24 and 30m per minute. End Driven by a motorised drum, belt Speeds - 15.6, 18.6 and 21.6m per minute Robust and durable 2-ply transmission belt. Belt driven roller conveyors can be used with the majority of package conveyor accessories Low noise operation

6


Belt Conveyor System

Live Roller Overall length 250 mm

Minimum frame length 1500 mm

250 mm

Direction of travel

260 mm

Back to back + 70 mm Back to back

140

35

Live Roller conveyors consist of a roller bed driven by a belt operating on the underside of the rollers. Therefore the belt will always travel in the opposite direction to the required package flow. Available widths 300, 400, 450, 500, 600, 800mm Lengths 2m up to 30m

Belt speeds of 15.6,18.6 and 21.6m/min (end drive)

Belt speeds of 9, 14, 18, 24 and 30m/min (centre drive)

Roller Capacity 70kg

Roller Pitch 83, 125mm

Accumaflow 250 mm

Overall length Minimum frame length 1500 mm

250 mm

Direction of travel

260 mm

Back to back + 70 mm Back to back

140

35

In all aspects the Accumaflow conveyor is identical to Live Roller except for the bed section and the type of belt used. Channels have sloped slots so when the forward motion of a package is interrupted, the backward force of the belt causes the rollers to travel up the sloped slots and therefore reduces line pressure. Available widths 300, 400, 450, 500, 600, 800mm Lengths 2m up to 30m Belt speeds of 9, 14, 18, 24 and 30m/min (centre drive)

Belt speeds of 15.6,18.6 and 21.6m/min (end drive) Belt width 250, 350, 400, 450, 550, 750mm

7


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.