Pallet Handling Conveyor Product Information Other products by Conveyor Units include:Lineshaft Conveyors Belt Conveyors High Speed Switch Sorters Belt Under Roller Conveyors Zero Line Pressure Conveyors Gravity Conveyors Stainless Steel Conveyors Flexible Conveyors Conveyor Rollers & Spares
Keeping Europe Moving The UK’s Largest Roller and Conveyor Manufacturer
Conveyor Units Ltd Sandy Lane, Titton, Stourport-on-Severn, Worcestershire, DY13 9PT. Tel: 0044 (0)1299 877541 Fax: 0044 (0)1299 877921 email: sales@conveyor-units.co.uk Issue 001/11-10
www.conveyor-units.co.uk
www.conveyorspares.co.uk
visit us at www.conveyor-units.co.uk
Pallet Conveyor Roller Straights Description
Pallet Conveyor Motorised Roller Straights Specifications
Lengths Available
Pallet Size
600mm to 3000mm in 150mm increments
1000/1200mm leading edge
Widths Available
Maximum Pallet Weight
1050mm BB (1000mm wide pallet) 1250mm BB (1200mm wide pallet)
600kg
Motor Type
13m/min and 16m/min
Speeds Available
0.085 kW
Electrical Power Motors should be connected to 400V 3ph 50Hz supply.
A robust pallet roller conveyor system. Rollers are driven tangentially by 5/8� chain in a fully enclosed side channel. The system offers minimal backlash, easy tensioning and a 150mm and 200mm roller pitch. With a load capacity of 1500kg per pallet the straight modules are available to handle up to 4500kg total conveyor load.
Motor Power (kW)
Full Load Current (A)
0.085
0.32
10
1050 / 1250 Back to Back
40
3
140
Tangential chain drive
16
4mm thick side channels 3mm and 5mm thick roller options 2401 39
Chain tension adjusted quickly without removing guards 150mm and 200mm roller pitch
Note: All dimensions shown are in mm.
Ability to run cables in non-drive channel with fascia to close section off Ability to fit photocells anywhere along frame via clamp brackets Soft start and inverter motor options available
02
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
19
Pallet Conveyor Motorised Roller Straights Description
Pallet Conveyor Roller Straights Specifications
Heights
Chain
Range of heights available from 400mm - 1050mm (Top of roller)
5/8� pitch simplex chain
Motor Type
1050mm to 6000mm in 150/200mm increments
0.37, 0.55, 1.1 and 1.5 kW available
Lengths Available Pallet Size
Motor Options
800/1000mm leading edge
No Brake and braked
Speeds Available 12m/min and 18m/min
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. 12m/min
18m/min
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
1500
0.37
0.95
1500
0.55
1.4
3000
0.55
1.4
3000
1.1
2.8
4500
1.1
2.8
4500
1.5
3.6
Motorised roller straights comprise of a number of powered rollers and adjacent gravity rollers. Motorised rollers are used to drive the load along the length of the conveyor and are mounted in flexible brackets such that they are higher than the gravity conveyor rollers. In this way the item being conveyed is constantly in contact with the drives. The pallet forces the motorised rollers down to the same level as the adjacent gravity rollers, so that the weight of the pallet is evenly distributed during transport.
952 / 1152 74
70
Conveyor speeds of 13m/min and 16m/min - can be used with an inverter
175
213.50
150mm roller pitch (125mm available on request)
213.50
50
50
220
No need for geared motors, chains and sprockets
205
Maximum pallet weight 600kg - optional 1000kg available on request
Compact and space saving design, can be installed directly on the floor 1015 Stand Fixing Centres (952 BB) 1215 Stand Fixing Centres (1152 BB)
2401 02
Note: All dimensions shown are in mm.
18
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
03
Pallet Conveyor Chain Straights Description
Pallet Conveyor Centre Transfers Specifications
Heights
Pallet Size
Range of heights available from 500mm - 1000mm (Top of roller)
800/1000mm leading edge
Motor Type
No Brake and braked
Chain Conveyor 0.75, 1.1 kW Lift Transfer 0.75 kW Roller Conveyor 0.37, 0.55 kW
Speeds Available
Motor Options
Roller Conveyor - 12m/min and 18m/min Chain Transfer - 12m/min and 18m/min Up to 184 pallet transfers per hour
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motor Power (kW)
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.37
0.95
0.75
1.9
0.55
1.4
1.1
2.8
The 3/4� pitch flat sided chain provides a strong supporting surface to convey pallets up to 1500kg. These modules are available in two and three strand chain versions. Chain tension is adjusted quickly and easily without removing any guards.
2131 (1931) 417.5 (217.5)
70
417.5
300
1155 (955)
1030 Fixing Centres
450 450
3/4� pitch flat sided chain running on low friction, hard wearing polymer guide strips
1500
4mm thick side channels
1160 Fixing Centres
1500kg pallet load capacity
Ability to run cables and pneumatics in side channel Chain in same lateral position on each module - giving a smooth, clean appearance and aiding cable runs
1183 (983)
Hollow crossties to enable cables to run from one side of the conveyor to the other
210
120
Note: Figures in brackets apply to 800mm wide Pallets
Top of Roller Height
262
120
2401 33
Note: All dimensions shown are in mm.
04
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
17
Pallet Conveyor Centre Transfers Description
Pallet Conveyor Chain Straights Specifications
Heights
Chain
Range of heights available from 425mm - 1075mm (Top of chain)
3/4� pitch simplex chain
Motor Type
1300mm to 3600mm in 50mm increments
0.75, 1.1, 1.5, 2.2, and 3.0 kW available
Lengths Available Pallet Size
Motor Options
1200mm leading edge
No Brake and braked
Speeds Available 12m/min and 18m/min
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. 12m/min
Centre transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation. Pallets can be received and transfered in either direction.
18m/min
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
1500
0.75
2.0
1500
1.1
3.2
3000
1.5
4.2
3000
2.2
3.9
4500
2.2
5.9
4500
3.0
7.2
850 900
101 2 STRAND
101
200
Nominal 150mm roller pitch Conveyor speeds of 12m/min and 18m/min
'A'
Maximum pallet weight 1500kg 900 Between Stand Centres 101
400 450
400 450
101
'A'
200
3 STRAND
450 Between Stand Centres Load Capacity (kgs) 1500 3000 4500
450 Between Stand Centres Dimension 'A' (mm) 2 Strand 3 Strand 113.5 156 134 181 159 221
2401 36
Note: All dimensions shown are in mm.
16
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
05
Pallet Conveyor Roller Transfers Description
Pallet Conveyor Double Transfers Specifications
Heights
Pallet Size
Range of heights available from 400mm - 1000mm (Top of roller)
800/1000mm leading edge
Motor Type
No Brake and braked
Motor Options
Chain Conveyor 0.75, 1.1 kW Lift Transfer 0.75 kW Roller Conveyor 0.37, 0.55 kW
Speeds Available Roller Conveyor - 12m/min and 18m/min Chain Transfer - 12m/min and 18m/min Up to 184 pallet transfers per hour
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motor Power (kW)
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.37
0.95
0.75
1.9
0.55
1.4
1.1
2.8
Roller transfers are self contained units, which can be fitted to a new or existing chain conveyor straight. The pop-up roller transfer is powered by two motorised rollers. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation.
3300 124
1152
70
856
372
140 3
170
1093 Fixing Centres 1200
450 450
3mm and 5mm thick roller options
1500
4mm thick side channels
1150 Fixing Centres
60
Tangential chain drive
Nominal 150mm roller pitch Available to fit 2 and 3 strand chain straights
101
90
1343 Fixing Centres
90
816
1421
179
3250
Set To 25 Nom. In Up Position and 25 Nom. In Down Position
Top Of Roller Height
3920
372
2401 28
Note: All dimensions shown are in mm.
06
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
15
Pallet Conveyor Double Transfers Description
Pallet Conveyor Roller Transfers Specifications
Heights
Pallet Size
Range of heights available from 500mm - 1100mm (Top of roller)
1200mm leading edge
Motor Type
12m/min and 18m/min
Speeds Available
0.18 kW motorised roller 0.75 kW lift motor
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motorised Roller
Bi-directional control available Conveyor speeds of 12m/min and 18m/min
Motor Power (kW)
Full Load Current (A)
0.18
0.58
0.75
1.9
1490 1378 Fixing Centres
MIN 500 TOR IN UP POSITION (MIN 450 TOR IN DOWN POSITION)
Maximum pallet weight 1500kg
Full Load Current (A)
952 BB / 1152 BB
Nominal 150mm roller pitch
Motor Power (kW)
828 Fixing Centres (952 BB) 1028 Fixing Centres (1152 BB)
Double transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation. The modules are available to suit the standard pallet conveyor widths.
Lift Motor
105 222.5
146 146 146
146 146
222.5 105
2401 21
Note: All dimensions shown are in mm.
14
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
07
Pallet Conveyor Chain Transfers Description
Pallet Conveyor Chain Turntables Specifications
Heights
Pallet Size
Range of heights available from 425mm - 1025mm (Top of chain)
1200mm leading edge
Motor Type
Roller Conveyor - 12m/min and 18m/min Rotation - 2rpm and 4rpm Up to 174 pallets per hour
Chain Conveyor 0.75 kW (12m/min) Chain Conveyor 1.1 kW (18m/min) Rotation Drive 0.18 kW (2rpm) Rotation Drive 0.37 kW (4rpm)
Speeds Available
Electrical Power Motors should be connected to 400V 3ph 50Hz supply.
Nominal 150mm roller pitch 3mm thick steel rollers with steel sprockets 3/4� pitch flat sided chain Types: Single Handed Transfer to Transfer Unit Single Handed Extended Transfer to Transfer Unit
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.18
0.58
0.75
1.9
0.37
0.95
1.1
2.8
2000 1020 955 Fixing Centres
80
Clockwise
Position of adjacent chain conveyor 1229 Fixing Centres Chain Centres
Transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation.
Motor Power (kW)
Stand Foot Plates (shown for reference only)
Turntable Bridging Units
TOC
248
150
2000
2401 24
Note: All dimensions shown are in mm.
08
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
13
Pallet Conveyor Chain Turntables Description
Pallet Conveyor Chain Transfers Specifications
Heights
Motor Options
Range of heights available from 400mm - 1000mm (Top of roller)
No Brake and braked
Motor Type
3/4” pitch flat sided chain
Chain
Chain Conveyor 0.75, 1.1 kW Lift Transfer 0.75 kW Roller Conveyor 0.37, 0.55 kW
Pallet Size 800/1000mm leading edge
Speeds Available Roller Conveyor - 12m/min and 18m/min Chain Transfer - 12m/min and 18m/min Up to 213 pallet transfers per hour
Electrical Power Motors should be connected to 400V 3ph 50Hz supply.
The chain turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to the chain strands the same.
Motor Power Full Load (kW) Current (A)
Motor Full Load Current (A) Power (kW)
12
0.37
0.95
0.75
1.9
18
0.55
1.4
1.1
2.8
Single Handed Extended Transfer to Transfer 140
Two rotation speeds of 2rpm and 4rpm 1160 Fixing Centre
140 160
1500
140
450
1500 900
450
128
450
1160 Fixing Centre
128
450
1500 900
74
Conveyor speeds of 12m/min and 18m/min
1.9
Top of Roller Height
174 pallets per hour rotating 90°
530 Fixing Centre
952/1152 70
2536 (1152) 2136 (952)
1642
952/1152
1345 Fixing Centre
900mm chain centres Pallet dimensions 1200mm leading edge
Full Load Current (A)
Single Handed Transfer to Transfer
1500
25
140 160
0.75
Top of Roller Height
25
Rotation angle of 90° to 180°
Lift Motor
Chain Transfer
Roller Conveyor Bed Motor Power (kW)
74
Speed (m/min)
1030 Fixing Centre
1030 Fixing Centre 1160 Fixing Centre
2401 37
Note: All dimensions shown are in mm.
12
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
09
Pallet Conveyor Roller Turntables Description
Pallet Conveyor Roller Turntables Specifications
Heights
Pallet Size
Range of heights available from 400mm - 1000mm (Top of roller)
800/1000mm leading edge
Motor Type
Roller Conveyor - 12m/min and 18m/min Rotation - 2rpm and 4rpm Up to 174 pallets per hour
Roller Conveyor 0.37 kW (12m/min) Roller Conveyor 0.55 kW (18m/min) Rotation Drive 0.18 kW (2rpm) Rotation Drive 0.37 kW (4rpm)
Speeds Available
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motor Power (kW)
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.18
0.58
0.55
1.4
0.37
0.95
The turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to roller conveyor the same.
2000
Rotation angle of 90° to 180°
80
1000
Position of adjacent roller conveyor
Two rotation speeds of 2rpm and 4rpm Conveyor speeds of 12m and 18m/min Pallet dimensions 800/1000mm leading edge
Back to Back
955 Floor Fixing Centres
174 pallets per hour rotating 90°
Top of Roller
173
Clockwise
1229 Floor Fixing Centres
2401 08
Note: All dimensions shown are in mm.
10
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
11
Pallet Conveyor Roller Turntables Description
Pallet Conveyor Roller Turntables Specifications
Heights
Pallet Size
Range of heights available from 400mm - 1000mm (Top of roller)
800/1000mm leading edge
Motor Type
Roller Conveyor - 12m/min and 18m/min Rotation - 2rpm and 4rpm Up to 174 pallets per hour
Roller Conveyor 0.37 kW (12m/min) Roller Conveyor 0.55 kW (18m/min) Rotation Drive 0.18 kW (2rpm) Rotation Drive 0.37 kW (4rpm)
Speeds Available
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motor Power (kW)
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.18
0.58
0.55
1.4
0.37
0.95
The turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to roller conveyor the same.
2000
Rotation angle of 90° to 180°
80
1000
Position of adjacent roller conveyor
Two rotation speeds of 2rpm and 4rpm Conveyor speeds of 12m and 18m/min Pallet dimensions 800/1000mm leading edge
Back to Back
955 Floor Fixing Centres
174 pallets per hour rotating 90°
Top of Roller
173
Clockwise
1229 Floor Fixing Centres
2401 08
Note: All dimensions shown are in mm.
10
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
11
Pallet Conveyor Chain Turntables Description
Pallet Conveyor Chain Transfers Specifications
Heights
Motor Options
Range of heights available from 400mm - 1000mm (Top of roller)
No Brake and braked
Motor Type
3/4” pitch flat sided chain
Chain
Chain Conveyor 0.75, 1.1 kW Lift Transfer 0.75 kW Roller Conveyor 0.37, 0.55 kW
Pallet Size 800/1000mm leading edge
Speeds Available Roller Conveyor - 12m/min and 18m/min Chain Transfer - 12m/min and 18m/min Up to 213 pallet transfers per hour
Electrical Power Motors should be connected to 400V 3ph 50Hz supply.
The chain turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to the chain strands the same.
Motor Power Full Load (kW) Current (A)
Motor Full Load Current (A) Power (kW)
12
0.37
0.95
0.75
1.9
18
0.55
1.4
1.1
2.8
Single Handed Extended Transfer to Transfer 140
Two rotation speeds of 2rpm and 4rpm 1160 Fixing Centre
140 160
1500
140
450
1500 900
450
128
450
1160 Fixing Centre
128
450
1500 900
74
Conveyor speeds of 12m/min and 18m/min
1.9
Top of Roller Height
174 pallets per hour rotating 90°
530 Fixing Centre
952/1152 70
2536 (1152) 2136 (952)
1642
952/1152
1345 Fixing Centre
900mm chain centres Pallet dimensions 1200mm leading edge
Full Load Current (A)
Single Handed Transfer to Transfer
1500
25
140 160
0.75
Top of Roller Height
25
Rotation angle of 90° to 180°
Lift Motor
Chain Transfer
Roller Conveyor Bed Motor Power (kW)
74
Speed (m/min)
1030 Fixing Centre
1030 Fixing Centre 1160 Fixing Centre
2401 37
Note: All dimensions shown are in mm.
12
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
09
Pallet Conveyor Chain Transfers Description
Pallet Conveyor Chain Turntables Specifications
Heights
Pallet Size
Range of heights available from 425mm - 1025mm (Top of chain)
1200mm leading edge
Motor Type
Roller Conveyor - 12m/min and 18m/min Rotation - 2rpm and 4rpm Up to 174 pallets per hour
Chain Conveyor 0.75 kW (12m/min) Chain Conveyor 1.1 kW (18m/min) Rotation Drive 0.18 kW (2rpm) Rotation Drive 0.37 kW (4rpm)
Speeds Available
Electrical Power Motors should be connected to 400V 3ph 50Hz supply.
Nominal 150mm roller pitch 3mm thick steel rollers with steel sprockets 3/4� pitch flat sided chain Types: Single Handed Transfer to Transfer Unit Single Handed Extended Transfer to Transfer Unit
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.18
0.58
0.75
1.9
0.37
0.95
1.1
2.8
2000 1020 955 Fixing Centres
80
Clockwise
Position of adjacent chain conveyor 1229 Fixing Centres Chain Centres
Transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation.
Motor Power (kW)
Stand Foot Plates (shown for reference only)
Turntable Bridging Units
TOC
248
150
2000
2401 24
Note: All dimensions shown are in mm.
08
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
13
Pallet Conveyor Double Transfers Description
Pallet Conveyor Roller Transfers Specifications
Heights
Pallet Size
Range of heights available from 500mm - 1100mm (Top of roller)
1200mm leading edge
Motor Type
12m/min and 18m/min
Speeds Available
0.18 kW motorised roller 0.75 kW lift motor
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motorised Roller
Bi-directional control available Conveyor speeds of 12m/min and 18m/min
Motor Power (kW)
Full Load Current (A)
0.18
0.58
0.75
1.9
1490 1378 Fixing Centres
MIN 500 TOR IN UP POSITION (MIN 450 TOR IN DOWN POSITION)
Maximum pallet weight 1500kg
Full Load Current (A)
952 BB / 1152 BB
Nominal 150mm roller pitch
Motor Power (kW)
828 Fixing Centres (952 BB) 1028 Fixing Centres (1152 BB)
Double transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation. The modules are available to suit the standard pallet conveyor widths.
Lift Motor
105 222.5
146 146 146
146 146
222.5 105
2401 21
Note: All dimensions shown are in mm.
14
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
07
Pallet Conveyor Roller Transfers Description
Pallet Conveyor Double Transfers Specifications
Heights
Pallet Size
Range of heights available from 400mm - 1000mm (Top of roller)
800/1000mm leading edge
Motor Type
No Brake and braked
Motor Options
Chain Conveyor 0.75, 1.1 kW Lift Transfer 0.75 kW Roller Conveyor 0.37, 0.55 kW
Speeds Available Roller Conveyor - 12m/min and 18m/min Chain Transfer - 12m/min and 18m/min Up to 184 pallet transfers per hour
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motor Power (kW)
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.37
0.95
0.75
1.9
0.55
1.4
1.1
2.8
Roller transfers are self contained units, which can be fitted to a new or existing chain conveyor straight. The pop-up roller transfer is powered by two motorised rollers. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation.
3300 124
1152
70
856
372
140 3
170
1093 Fixing Centres 1200
450 450
3mm and 5mm thick roller options
1500
4mm thick side channels
1150 Fixing Centres
60
Tangential chain drive
Nominal 150mm roller pitch Available to fit 2 and 3 strand chain straights
101
90
1343 Fixing Centres
90
816
1421
179
3250
Set To 25 Nom. In Up Position and 25 Nom. In Down Position
Top Of Roller Height
3920
372
2401 28
Note: All dimensions shown are in mm.
06
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
15
Pallet Conveyor Centre Transfers Description
Pallet Conveyor Chain Straights Specifications
Heights
Chain
Range of heights available from 425mm - 1075mm (Top of chain)
3/4� pitch simplex chain
Motor Type
1300mm to 3600mm in 50mm increments
0.75, 1.1, 1.5, 2.2, and 3.0 kW available
Lengths Available Pallet Size
Motor Options
1200mm leading edge
No Brake and braked
Speeds Available 12m/min and 18m/min
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. 12m/min
Centre transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150mm for all pallet types, these transfers offer exceptional support for pallets during the transfer operation. Pallets can be received and transfered in either direction.
18m/min
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
1500
0.75
2.0
1500
1.1
3.2
3000
1.5
4.2
3000
2.2
3.9
4500
2.2
5.9
4500
3.0
7.2
850 900
101 2 STRAND
101
200
Nominal 150mm roller pitch Conveyor speeds of 12m/min and 18m/min
'A'
Maximum pallet weight 1500kg 900 Between Stand Centres 101
400 450
400 450
101
'A'
200
3 STRAND
450 Between Stand Centres Load Capacity (kgs) 1500 3000 4500
450 Between Stand Centres Dimension 'A' (mm) 2 Strand 3 Strand 113.5 156 134 181 159 221
2401 36
Note: All dimensions shown are in mm.
16
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
05
Pallet Conveyor Chain Straights Description
Pallet Conveyor Centre Transfers Specifications
Heights
Pallet Size
Range of heights available from 500mm - 1000mm (Top of roller)
800/1000mm leading edge
Motor Type
No Brake and braked
Chain Conveyor 0.75, 1.1 kW Lift Transfer 0.75 kW Roller Conveyor 0.37, 0.55 kW
Speeds Available
Motor Options
Roller Conveyor - 12m/min and 18m/min Chain Transfer - 12m/min and 18m/min Up to 184 pallet transfers per hour
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. Motor Power (kW)
Full Load Current (A)
Motor Power (kW)
Full Load Current (A)
0.37
0.95
0.75
1.9
0.55
1.4
1.1
2.8
The 3/4� pitch flat sided chain provides a strong supporting surface to convey pallets up to 1500kg. These modules are available in two and three strand chain versions. Chain tension is adjusted quickly and easily without removing any guards.
2131 (1931) 417.5 (217.5)
70
417.5
300
1155 (955)
1030 Fixing Centres
450 450
3/4� pitch flat sided chain running on low friction, hard wearing polymer guide strips
1500
4mm thick side channels
1160 Fixing Centres
1500kg pallet load capacity
Ability to run cables and pneumatics in side channel Chain in same lateral position on each module - giving a smooth, clean appearance and aiding cable runs
1183 (983)
Hollow crossties to enable cables to run from one side of the conveyor to the other
210
120
Note: Figures in brackets apply to 800mm wide Pallets
Top of Roller Height
262
120
2401 33
Note: All dimensions shown are in mm.
04
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
17
Pallet Conveyor Motorised Roller Straights Description
Pallet Conveyor Roller Straights Specifications
Heights
Chain
Range of heights available from 400mm - 1050mm (Top of roller)
5/8� pitch simplex chain
Motor Type
1050mm to 6000mm in 150/200mm increments
0.37, 0.55, 1.1 and 1.5 kW available
Lengths Available Pallet Size
Motor Options
800/1000mm leading edge
No Brake and braked
Speeds Available 12m/min and 18m/min
Electrical Power Motors should be connected to 400V 3ph 50Hz supply. 12m/min
18m/min
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
Load Capacity (kg)
Motor Power (kW)
Full Load Current (A)
1500
0.37
0.95
1500
0.55
1.4
3000
0.55
1.4
3000
1.1
2.8
4500
1.1
2.8
4500
1.5
3.6
Motorised roller straights comprise of a number of powered rollers and adjacent gravity rollers. Motorised rollers are used to drive the load along the length of the conveyor and are mounted in flexible brackets such that they are higher than the gravity conveyor rollers. In this way the item being conveyed is constantly in contact with the drives. The pallet forces the motorised rollers down to the same level as the adjacent gravity rollers, so that the weight of the pallet is evenly distributed during transport.
952 / 1152 74
70
Conveyor speeds of 13m/min and 16m/min - can be used with an inverter
175
213.50
150mm roller pitch (125mm available on request)
213.50
50
50
220
No need for geared motors, chains and sprockets
205
Maximum pallet weight 600kg - optional 1000kg available on request
Compact and space saving design, can be installed directly on the floor 1015 Stand Fixing Centres (952 BB) 1215 Stand Fixing Centres (1152 BB)
2401 02
Note: All dimensions shown are in mm.
18
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
03
Pallet Conveyor Roller Straights Description
Pallet Conveyor Motorised Roller Straights Specifications
Lengths Available
Pallet Size
600mm to 3000mm in 150mm increments
1000/1200mm leading edge
Widths Available
Maximum Pallet Weight
1050mm BB (1000mm wide pallet) 1250mm BB (1200mm wide pallet)
600kg
Motor Type
13m/min and 16m/min
Speeds Available
0.085 kW
Electrical Power Motors should be connected to 400V 3ph 50Hz supply.
A robust pallet roller conveyor system. Rollers are driven tangentially by 5/8� chain in a fully enclosed side channel. The system offers minimal backlash, easy tensioning and a 150mm and 200mm roller pitch. With a load capacity of 1500kg per pallet the straight modules are available to handle up to 4500kg total conveyor load.
Motor Power (kW)
Full Load Current (A)
0.085
0.32
10
1050 / 1250 Back to Back
40
3
140
Tangential chain drive
16
4mm thick side channels 3mm and 5mm thick roller options 2401 39
Chain tension adjusted quickly without removing guards 150mm and 200mm roller pitch
Note: All dimensions shown are in mm.
Ability to run cables in non-drive channel with fascia to close section off Ability to fit photocells anywhere along frame via clamp brackets Soft start and inverter motor options available
02
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
email: sales@conveyor-units.co.uk
www.conveyor-units.co.uk
19
Pallet Handling Conveyor Product Information Other products by Conveyor Units include:Lineshaft Conveyors Belt Conveyors High Speed Switch Sorters Belt Under Roller Conveyors Zero Line Pressure Conveyors Gravity Conveyors Stainless Steel Conveyors Flexible Conveyors Conveyor Rollers & Spares
Keeping Europe Moving The UK’s Largest Roller and Conveyor Manufacturer
Conveyor Units Ltd Sandy Lane, Titton, Stourport-on-Severn, Worcestershire, DY13 9PT. Tel: 0044 (0)1299 877541 Fax: 0044 (0)1299 877921 email: sales@conveyor-units.co.uk Issue 001/11-10
www.conveyor-units.co.uk
www.conveyorspares.co.uk
visit us at www.conveyor-units.co.uk