Adhesives

Code Description GLU001 Kwik Tak Spray Adhesive Can Suitable for sticking seams before stitching

Code Description GLU002 Kayobond General Purpose Aerosol Adhesive Suitable for foam bonding. Not suitable for bonding to external skin of boat. Use GLU005

Code Description GLU003 Kayobond High Heat Adhesive GLU004 Kayobond High Heat Adhesive Suitable for bonding side lining carpets and laminates. Not suitable for PVC, foam backed vinyl and vinyls. Size (ml) 500

Size (ml) Coverage (m2) 500 6 - 8

Size (l) Coverage (m2) 1 2.5 - 3

5 12.5 - 15

Code Description Size (ml) Coverage (m2)

GLU005 Kayobond Web Tack High Heat Adhesive 500

Suitable for bonding foam backed vinyl fabrics to outer skin of boat. Not suitable for unbacked vinyl and PVC. Can also be used for sidelining. 6 - 8

Code Description GLU011 Kayobond PVC Adhesive GLU006 Kayobond PVC Adhesive GLU007 Kayobond PVC Adhesive Suitable for most unbacked vinyl and PVC Size (l) Coverage (m2) 250ml 0.6 - 0.75

1 5 2.5 - 3 12.5 - 15

Code Description Size (l) Coverage (m2)

GLU008 Kayobond PSA Water Based Adhesive

5 This water based adhesive is suitable for soft, delicate fabrics and foam backed vinyls. It may be used in enclosed areas. 8 - 10

Code Description GLU900 Adhesive Spatula 4” Size (ml) 100

Code Description Size (l) Coverage (m2)

GLU009 Kayobond PVC 1 litre and Curing Agent 60g GLU010 Kayobond PVC 5 litre and Curing Agent 300g 1 5 2.5 - 3 12.5 - 15

Can be added to Kayobond PVC to improve heat and water resistance. For external use only. Curing agent must be added to entire tin, this is a one use adhesive, cannot be stored once mixed.

Code Description GLU901 Solvent 1 Cleaner Used to prepare and clean surfaces Size (l) 1

Adhesive Useful Tips

Preparation

Take off covering. Remove any powdered foam using cleaning wheel. Clean surface with solvent cleaner – GLU901. Once process is complete see general application.

General Application Contact Adhesive

Apply even coat to both surfaces using spreader. Ensure adhesive is fully touch dry. Bring surfaces together. Ensure no air between surfaces. Once surfaces are laid, apply even pressure all over using a hard block or roller.

All surfaces need to be dry and dust free.

DO NOT use adhesive in temperature less than 10 degrees centigrade.

Aerosol Spray Adhesive

Surface preparation as described previously. Apply evenly from left to right a coat of adhesive spray to one side, on the second substrate apply an even coat top to bottom. Leave adhesive to dry 4-5 minutes or until tacky to touch. Bring surfaces together. Ensure no air between the surfaces. Apply even pressure using block or roller.

Water Based Pressure Sensitive Adhesive

Surface preparation as before. Apply even coat using paint roller to solid surface wood or fibreglass. Leave to completely dry, adhesive will look clear and tacky to touch. Once dry apply fabric. Fabric may be repositioned to final dressing.

Damp or damaged surfaces should be replaced.

Ensure all areas are well ventilated when applying solvent based products.

Do not use near naked flames.

Health and Safety

For full health and safety guidelines refer to the material data sheets available from Kayospruce Ltd or at www.kayospruce.com

For further details regarding applications refer to the technical data sheet.

Please Note:

Prior to use, ALWAYS test the adhesive onto sample material. The adhesives that we sell are regularly in use and well proven in the textile industry. However, we cannot be held responsible for damage to your materials if the adhesive system does not work. It is your responsibility to choose the correct product for your requirement. Because of the nature of the adhesives, they cannot be shipped by Airfreight and even road transport, within the UK, may be restricted. Please note, there may be restrictions on the ability to transport. Consult with Kayospruce when ordering.

Batyline

Stamskin

Warranty

The Agora warranty covers abnormal fabric damage due to fading or resistance loss under normal conditions of exposure, including sun, mould, rot, and chemicals in the atmosphere in general, provided the fabric has been correctly installed, used, and maintained. The installation work of the distributor is not covered by the warranty. The warranty does not cover damage due to misuse, accidental burns, negligence, or piercing. Waterproof and FR treatments: Recommended for cushions and upholstery only. Make sure the laminated side is on the inside and do not expose it to the sun or to poor weather.

The ACRISOL warranty covers an abnormal deterioration of the fibre due to the loss of colour or resistance whenever there are normal exposure conditions, including sun, mould, rot, and atmospheric agents in general, and if the fibre has been installed, used, and maintained correctly. The guarantee does not cover the installation work of the distributor, it only replaces the affected tissue footage. The warranty also does not cover, in any case, the deterioration due to abusive use, accidental burns, negligence or perforation.

The 5-year limited warranty makes Sunbrella the only performance fabric brand to guarantee against becoming unserviceable due to: • Loss of colour • Loss of strength • Abrasion • Pilling from normal usage and exposure conditions, including sunlight, mildew, and atmospheric chemicals when used for appropriate applications.

Limitations and Exclusions applicable to its warranty: • Damage caused by the exposure of the product to improper applications. • Staining resulting from clothing dyes and/or external contaminants. • Staining due to contact with suntan lotion, teak oil, • Deficiencies caused by negligence, abuse, misuse, (engine) grease or similar contaminants. • Improper storage or handling. • Improper care and cleaning according to defined guidelines. • Transformation and or installation processes performed inadequately. • Exposure to harmful chemicals. • Material that has been repaired, refurbished, conditioned, or modified. • Deterioration due to the use of incompatible or unspecified adhesives or adjacent components. • Except as specifically set forth in our provisions regarding Pink Stain: Staining resulting from the growth of organisms in adjacent boat components (commonly referred to as “pink stain”) * • Previously approved commercially acceptable colour variations which are not lot controlled. • Damage or problems caused by accidents, natural catastrophes, or any other external causes unrelated to the product’s performance in normal use. • When the information and / or evidence that supports the claim is not provided by the buyer. BATYLINE materials are covered by the warranty against any premature degradation of their essential characteristics, referred to hereunder, subject to normal indoor or outdoor usage: • Breaking strength of at least 65% of the original strength quoted on the datasheet • Colour fade • Conservation of flexibility characteristics

STAMSKIN materials are covered by the warranty against any premature degradation of their essential characteristics, referred to hereunder, subject to normal indoor or outdoor usage: • Breaking strength of at least 70% of its original value • Tear strength of at least 70% of its original value • Colour fade

Nautolex will not exhibit defects in materials or workmanship, when used under normal conditions, in marine upholstery applications. If Product fails to conform to this Limited Warranty, then OMNOVA will provide replacement Product to you, free of charge, and if such failure occurs within two (2) years from the date of purchase, then OMNOVA will also issue a credit memo to cover your documented out-of-pocket labor costs incurred to re-upholster the end use product, but not exceed forty dollars ($40) per linear yard for each linear yard of Product replaced. This Warranty extends only to the original boat manufacturer and is not transferable.

This Limited Warranty does not cover issues arising from: (a) pink staining; (b) degradation resulting from interaction with other components of an upholstered product; (c) damage caused by post sale application of coatings, conditioners or other surface treatments; (d) improper installation or structural failure of the upholstered product; (e) damage caused by accidents, misuse, abuse or vandalism; (f) deterioration caused by exposure to harsh or abnormal environmental conditions; or (g) deterioration due to exposure to cleaners or methods of cleaning which do not comply with OMNOVA’s standard care and cleaning instructions as set forth at https://www.omnova.com/en/products/coated-fabrics/nautolex. The warranty stands for a period of 5 years as long as the customer has complied with the cleaning guidelines stated on the Ecosuede and Buccara Tweed datasheets. Please request these from Kayospruce. The 5-year warranty covers abnormal deterioration of the fabric fibre and colour and takes effect from the date of installation, provided there is normal exposure to the sun and atmospheric agents in general. Cleaning Instructions

Clean Acrisol ® fabrics with neutral soap in lukewarm water we recommend to clean at a temperature of no more than 30°

Do not bleach:

do not use solvents or abrasive detergents

Do not dry-clean

Air dry: do not use a clothes dryer

Iron at low temperature

Agora® fabrics can be washed simply with water in most cases but remember that the most stubborn dirt can be removed with common household cleaning products, including bleach. Fast drying and wrinkle resistant, our fabrics will look like new for years.

Clean Acrisol ® fabrics with neutral soap in lukewarm water we recommend to clean at a temperature of no more than 30°

Do not bleach:

do not use solvents or abrasive detergents

Do not dry-clean

Air dry: do not use a clothes dryer

Iron at low temperature

1. Brush off loose dirt. 2. Spray on a cleaning solution of water and mild soap. 3. Use a soft bristle brush to clean. 4. Allow cleaning solution to soak into the fabric. 5. Rinse thoroughly until all soap residue is removed. 6. Air dry. Spradling recommends cleaning at least once a week to extend the lifespan of the upholstery, preventing dirt and contamination from building up and stains from becoming permanent.

Clean the whole surface in circular motions using liquid hand soap and water (1 part soap to 9 parts water), or check the Spradling guide for recommended cleaning products.

Rinse and wipe with a clean damp white cloth to get rid of any excess soap. Repeat as needed and then let dry.

Once a month, you can use a soft-bristle brush for a deeper cleaning. Remember, light colours need more care, more often.

– Spray Cleaner 500 (Serge Ferrari) on the surface – Let the cleaning solvent sit for 2-3 mins – Use soft bristle brush and brush in circular motion (do not rub backwards and forwards) – Let it stand for 1 more min – Flush with water and avoid leaving residue on the fabric – Wipe with a dry cloth – Spray Cleaner 500 (Serge Ferrari) on the surface – Let the cleaning solvent sit for 2-3 mins – Use soft bristle brush and brush in circular motion (do not rub backwards and forwards) – Let it stand for 1 more min – Remove the cleaner with a damp sponge – Wipe with a dry cloth Clean the whole surface in circular motions using liquid hand soap and water (1 part soap to 9 parts water). Rinse and wipe with a clean damp white cloth to get rid of any excess soap. Repeat as needed and then let dry. Once a month, you can use a soft-bristle brush for a deeper cleaning. Remember, light colours need more care, more often.

Hand clean with lukewarm water or machine wash at 30º and neutral PH soap without centrifuging. Do not use dryer. To eliminate water, use a towel or a hair drier at mid temperature. • Eliminate the dirt by gently brushing or vacuuming the fabric. • Occasionally use a water and soft soap solution to clean the fabric (max. 30ºC). ·Apply to the fabric and then rinse with running water • Let the fabric dry completely. • Do not use solvents or abrasive detergents.