Cartwright Straight Frame Fridge Trailer Trailers Built for Australia
STANDARD FEATURES
Trailers Built for Australia
Trailer Lengths, widths, heights and axle configurations available to suit all operations
Chassis
Main Beam - Painted beam automatically welded incorporating high tensile steel top and bottom flanges
Fifth Wheel
Neck / Rubbing Plate - 80mm deep high tensile steel neck with 8mm rub plate assembly and bolt in king pin
Cartwright Transport PTY Ltd www.cartwright-group.com.au +61 [0]411 176 033 howard-hansen@cartwright-group.com.au PO Box 251, Wentworth Falls NSW 2782
Rear Frame
Closure - 80mm O/A thickness, 5 element doors, exterior skin 2.2mm thick woven roving high gloss finish, c/w WBP ply wood bonded to RTM insulation and GRP interior finish - insulated shutter options available
Lead up - 8mm plate angled at the front of the trailer Landing Gear
Jost landing leg with compensating feet
Suspension and Axles
Axles - Disc and drum axles available - BPW / SAF
Frame - Heavy duty stainless steel rear frame with integral gutter
Door Furniture - 1 off stainless steel locking bar & keepers per door c/w surface mounted stainless steel handles. Aluminium plates within door panel Hinges - 4 off stainless steel hinges per door Door Restraints - Spring loaded stainless steel door retainers (Rub plates fitted to side panels to protect from door lock bars)
Raise & Lower Valve with auto reset fitted as standard
Step - Pull out 3 rung galvanised ladder with top platform area
Wheels and Tyres
Tyres - Twin and single tyres available to suit Rims - Steel wheels in pre-finished silver (alloy options)
Roof Frame
Braking System and Park Brake
4S2M EBS braking system including roll stability and electronic load sensing with dedicated ISO 7638 socket
Roof Panel- 140mm thick laminated panel , GRP outer/inner skin bonded to RTM insulation
Sides
Panel - 5 element panels bonded on vacuum press, 36mm O/A thickness. High gloss white impregnated GRP exterior and high impact resistant Woven Roven GRP interior, RTM insulation core
Park & Shunt - Park safe valve Brake Chambers - Spring brake chambers fitted to all 3 axles
Electrics
Coupling Box - Fixed front coupling box
Load-Lok - Two rows of recessed Load-Lok, height set to customer requirements
Main loom - 24v ISO. Plug & Play IP67 rated wiring loom (multi voltage)
Kickstrip - 283mm high alloy kick strips bonded and fixed to body sides & front bulkhead at floor level
Front Marker - LED surface mounted and protected Rear Marker - LED surface mounted and protected
Floor
133mm o/a thickness laminated panel. Constructed of 25mm thick WBP scarf jointed plywood top surface, 100mm HD300 RTM insulation, WBP plywood, acrylic coated steel skin to the underside. Top surface of floor is overlaid with GRP membrane and two layers of GRP resin impregnated with silica grit throughout. This offers a hardwearing, water proof, non-slip surface. Full width aluminium chequerplate, 1200mm deep recessed into floor at rear - full aluminium floors available as option
Fridge
ThermoKing SLX400e or Carrier Vector 1950. 200 litre diesel tank fitted behind landing legs. Dual fill. Multi temp options available.
Side Markers - LED Rear Cluster - LED options available Under-run
Galvanised bolt on under-run assembly
Side-guards
Galvanised hinged drop arms with anodised aluminium side guard rails
Spray suppression
Thermoplastic mudwings with Clearpass flaps - option of spats & valance available
Rear buffer
Galvanised compression buffer with 4 double acting rams (options available)
Front Bulkhead
Panel - 100mm O/A thickness, constructed of GRP inner and outer skin with RTM insulation c/w steel H frame to support nose mounted fridge
Load Securing All track and load securing systems available
Air Return panel - 2 aluminium channels fitted vertically with hard wearing HDPE panel fitted, heavy duty rubber blocks 2 off fitted at bottom to kick strip
Cartwright offer a huge amount of options to build to your exacting specifications Get in touch with your sales rep today to discuss extra features