Cartwright Fixed Deck Independent Suspension Trailers Built for Australia
Trailers Built for Australia
Trailer Dimensions
STANDARD FEATURES
Chassis
O/A Height - 4000MM (options available) Top Deck - 1810mm Bottom Deck - 1810MM Length and Tri-Axle options available
Galvanised Step Frame Design with sub-frame Cross Bearers - I bearers and box bearers at 305mm centres in main body Side Rave - Concealed alloy outer capping fastening side raves for FRP bodywork. Anodised to match rear. Pressed inner steel side rave with outer capping
Fifth Wheel
Rubbing Plate -Full width 10mm rubbing plate with high level nose on fifth wheel plate
Landing Gear
Jost landing leg with compensating feet
Suspension and Axles
Tridec Independent air suspension – Tandem LV-O with galvanised wheel box. Haldex Colas Raise and lower valve fitted with auto reset to ride height, within nearside rear hatch. Internal controls recessed into rear pillar.
Cartwright Transport PTY Ltd www.cartwright-group.com.au +61 [0]411 176 033 howard-hansen@cartwright-group.com.au PO Box 251, Wentworth Falls NSW 2782
Front Bulkhead
Constructed from 21mm FRP, all edges sealed before assembly. Aluminium radiused cant rails and aluminium radiused front corners. Galvanised steel inner pressing fitted full height inside each corner pillar, reinforcing side panels to front bulkhead. Constructed from 21mm FRP
Sides
Constructed from 21mm FRP, all edges sealed before assembly. One piece panel. Front storage hatch complete with N/S access door. Hatch above wheelbox both sides for access to raise and lower valve, EBS ECU, air tanks etc. Hatches to be aluminium alloy with gas struts & push-button latches
Internal bulkhead protection
2 x full width steel top hat profiles fitted on top deck
Roof frame
Cant Rail - 75mm radius aluminium cant rail Roof Skin - One piece translucent GRP skin bonded to galvanised roof sticks c/w alloy rain deflector
Wheels and Tyres
385/65 R 22.5 x 4
Braking System and Park Brake
CU/EEC 2 line system, load sensed with electronic anti lock system. Knorr Bremse GEN 3 4S2M/2M EBS with roll over stability system located on O/S rear hatch. C/CA couplings, electrical connections via 7 pin plugs and dedicated ISO 7638 fixed to front coupling box.
Rear
Hot dip galvanised steel frame. 4 x Steel roller buffers fitted, 1 pair in bottom corners and 1 pair at 1000mm Centre line. Rear aperture closed by double barn type doors with double locking bars and 5 hinges per side. Stainless hinges protected as part of rear frame design
Park brakes : Park and shunt located N/S local to landing legs
Second deck floor
Constructed from 40mm alloy plank.
Internal
330mm x 4mm heavy duty galvanised steel kick strip fitted to O/S and N/S sidewalls on both decks.
Load securing
Two rows of 1806 heavy-duty load lock track fitted to sidewalls on both decks including wheelboxes
Tail LIfts
Range of internal & external tail lifts available
Electrics
Main loom - 24v ISO. Plug & Play IP67 rated wiring loom (multi voltage) Front Marker - LED surface mounted and protected Rear Marker - LED surface mounted and protected Side Markers - LED Rear Cluster - LED
Cartwright offer a huge amount of options to build to your exacting specifications Get in touch with your sales rep today to discuss extra features