How to use
architectural lighting to revamp your home
Architectural lighting enhances the structure of a space to create a cohesive experience. It’s something to be considered during every building and renovation project, and the earlier the better. This is because this type of lighting is integrated directly into the space, blending in with the features of your home. Here are some ways architectural lighting is used.
To emphasize ceilings If you have architectural ceilings, rather than installing pot lights consider adopting lighting that blends into the millwork and molding. This could work well on a beamed, coffered, coved or tray ceiling.
To set the mood with wall wash lighting Wall washing is a technique that directs light at a wall to draw attention to the smooth, vertical surface. The fixtures can be recessed in the ceiling or mounted to it. If you prefer to create an uplighting effect, install the lights on the floor.
To light your way Illuminate stairways by adding pot lights on both sides of the bottom step, either on the lowest riser or the wall. Alternatively, add lighting within each riser. Uplighting can create height and drama, and when used to illuminate staircases, it also focuses light where it’s most needed. There are many other possibilities when it comes to architectural lighting, from illuminating the underside of kitchen counters and cabinets, to lighting up built-in shelving and other custom features. For the best possible results, make sure to speak with an architect before you start your renovation or building project. November 2021
|
EVERYTHING HOME
|
9
