PDE Catalogue 2023

Page 1

BENG & MENG (HONS) PRODUCT DESIGN ENGINEERING
Catalogue 2023
Degree Show
GLASGOW SCHOOL OF ART SCHOOL OF DESIGN

Introduction from Professor Stephen Bottomley, Head of the School of Design

Welcome to the 2023 School of Design Degree Show at the Glasgow School of Art.

In your hands is one of a dozen graduating catalogues that have been lovingly assembled for each of our exhibiting programmes in the School of Design for their shows this year. Within these sheets you will discover the exciting work of our graduating students in image and text, alongside reflective snap shots that capture the energy, and concentration within our studios in the run up to this exhibition.

We believe making a physical catalogue to accompany our excellent digital on-line showcases is both important and relevant. Research has revealed what we intuitively knew, that making, and art is good for our mental health and can positively improve the quality of life by alleviating symptoms of anxiety, depression, loneliness and even dementia. In our busy lives, we all spend an increasing amount of time in digital environments, yet we remain alert to the important of reinforcing a balance between the virtual and the real in our teaching and specialist practices.

In the 1850s the Glasgow Government School of Design changed its name to The Glasgow School of Art, while in the same time John Ruskin, the most influential critic of the Victorian era, spoke of an education where the ‘hand, the head and the heart’ were interconnected. As you will witness, those values are still very much alive and true today.

We hope that this guide accompanies you on your journey be it at our Glasgow degree show, or at later events in London and that the work reflects the passion and attention of our students, as well as the care of the staff who have guided them.

To all our graduating students on behalf of all the staff, academic, administrative and support, we wish you every success in this, the exciting start of your careers. Please continue to stay in touch with us, remembering us in your hearts and minds, as we will you.

2 3 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art

Product Design Engineering

A message from the PDE team

This is the time of year when emotions run high, deadlines have been met, exams are finished, 3D printers are no longer working away in the background and the cloud has a break from processing CAD files. It’s now time to celebrate the end of the beginning. PDE is a collaboration between the School of Design at the Glasgow School of Art, and the James Watt School of Engineering at the University of Glasgow - two distinctive educational cultures that are integral to the PDE experience. In most cases, the beginning of the students PDE experience starts with a short, sharp project on day 1 of Year 1. A chance to meet new friends, work collectively, design engineer, build and test. The building blocks for the next years of study and hopefully some fun along the way!

PDE projects always focus on how technology can improve the quality of life, celebrate diversity and embrace the opportunity to develop inclusive and responsible solutions to real world challenges. The contents, skills and methods that you see in this publication are not the result of one year of PDE studies. They are the accumulation of either four or five years of study and it’s a pleasure to share these projects with you.

During the final year, the students have been developing connections and networks that enable them to bridge the gap from academia to professional life. Several students have worked with industrial partners this year and the PDE team would like to thank them for their input and support. We are always looking to develop our range of external project partners; if you are interested, or know someone that would benefit from being involved with PDE, please let me know. Thanks also go to Autodesk for their continued support and partnership, their approach to democratising technology is highly valued by PDE.

Finally, the PDE team would like to wish the students all the very best, the beginning of the next stage in their PDE experience is imminent... keep in touch!

4 5 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art

Ailsa McClymont Anna Kennedy Beth Fairgrieve Callum Parke

In my final year I looked to combine my passion for community design along with the importance of nature into a project surrounding the improved indoor library environment. Libraries have played a crucial role in the development of modern society. The access to free educational tools and safe, comfortable spaces is invaluable. However, with funding cuts and closures of libraries in Scotland, it is vital that these resources are still utilised by the public.

Throughout my design process I aimed to make decisions to promote inclusivity and intuitive user interactions. I always look for inspiration in colour and form, using these as important prototyping criteria. Throughout my degree have developed a style where aesthetics and form are not an afterthought but a key stage in the overall process. Along with this I was able to incorporate and investigate modern growing technology to promote plant health and ease of use.

hope that by incorporating plants into my final project, that the importance of environmental design can be understood. We, as designers, have a responsibility to design for the future and make sustainability a key foundation in our process.

look forward to pursuing a career in Environmental Engineering and continuing to develop my design skills and knowledge.

I am a design engineer passionate for a user centred process. The result is always superior from a process that has had user input such as interviews, human factors and user trials.

I like to build on design concepts that have gone before. This allows the evolution of my concepts to become the unique, creative outputs that best reflects me.

This year have designed an automated, self-adjustable headrest for wheelchair users, called Power Mount. This enables users with conditions such as Amyotrophic lateral sclerosis (ALS), Motor Neuron disease and Cerebral Palsy to adjust their head position themselves using the wheelchairs’ onboard control system. Concepts for the mechanisms stemmed from examination of technology that achieves similar movements, such as a powered car wing mirror. Power Mount parameters were set from user investigations, such as asking participants to move their head while I record range and time measurements.

Power Mount is designed to give users a sense of freedom and independence. The people that I met throughout process were extremely valuable and gave insights which helped guide this product to where it is today. They were all pleased with the output that presented to them at the end of the year. am extremely grateful to everyone here at GSA, and out with, who have helped me along this valuable 5-year journey.

My practice incorporates the combination of user-centred design with creating the best technical solutions: from early concept ideation, 3D printed prototypes, user testing to detailed engineering solutions.

am passionate about helping all user groups through innovative design solutions and have learned the value of co-design, particularly while working with sensitive user groups. During my MEng project, I have worked closely with Alzheimer Scotland to design a light therapy device for people living with dementia experiencing sundowning; a type of agitation which is caused by disruptions to the circadian rhythm. The project began by exploring all current treatment solutions for sundowning, finding that many options have not been designed specifically for people living with dementia. As a product design engineer, it was my role to explore how new technology, combined with the best aspects of current solutions could be combined to create a device which improves symptoms. Interacting with carers and people living with dementia throughout the design process has allowed me to deliver the best possible product intervention considering user comfort with technology, aesthetics and dementia complex sensory needs.

am passionate about listening to the user, taking time to understand the problem in depth and working alongside them to design the best solution which can improve lives.

I’m Callum, a graduate product design engineer with an infatuation for all things technology and design. I love turning ideas into reality and have gained a great deal of experience in prototyping and testing through the facilities available at GSA. I’m particularly interested in sustainable design and using additive manufacturing in industry to reduce waste and improve efficiency. I look forward to applying my skills to make a positive impact on the world through my work.

I’m a keen runner and cyclist in my free time, and throughout my studies at GSA have been fortunate enough to be able to integrate my lifestyle and coursework at most opportunities. This year, I poured my heart and soul into a challenging project and I’m proud to present Axis: The Ultimate Portable Cable Camera System for Action Sports Videographers.

Action sports videography has become increasingly popular, and videographers are always looking for ways to create dynamic and cinematic shots. A cornerstone of the sports film industry is the cable camera. However, traditionally these can be expensive, time-consuming to set up, and require significant resources to operate effectively. To address these challenges, Axis has been developed as a lightweight, easy to use cable camera system that allows the smooth and stable camera movements users desire, but from the convenience of their back pocket.

6 7 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art
↘ ailsa514@hotmail.com ↘ uk.linkedin.com/in/ailsa-mcclymont-21b1b220b ↘ anna.l.kennedy@btinternet.com ↘ uk.linkedin.com/in/anna-kennedy-19112000 ↘ beth.fairgrieve@gmail.com ↘ uk.linkedin.com/in/beth-fairgrieve-33522817b

Cameron Marr Camilla Laing

Currently many people cleaning their car use equipment such as Machine Polishers to disrupt the dirt/debris within the fixed carpets to greatly improve the final result after cleaning the fixed carpets. This is done by removing the polishing pad and attaching the Velcro to the fixed carpet. The machine polisher is then turned and hence vibrates the fixed carpet dislodging the dirt/debris. This is detrimental to the expensive machine polisher and provides a very challenging user cycle. Other options on the market include the Wet Vac and brushed drill attachments. Each has their own issues, the Wet Vat is expensive and requires a long cleaning process leaving the car slightly damp. The drill attachment is affordable however is challenging to use simultaneously with a vacuum making it very inefficient and damaging to the carpets.

The Dirt Disruptor is a rechargeable device that loosens and excites the dirt/debris within a car footwell, allowing for more efficient and effective vacuuming. This results in a cleaner car in less time.

The design process analysed various combinations of mechanisms and circuitry to generate the required level of vibration. Research, proto typing, user testing and experimental work generated significant insights for development. Thorough consideration of human factors, material selection, manufacturing processing and cost prompted the final design.

High ‘N’ Dry is a clothes-drying product designed for people living in flats who have no outdoor space to dry washing and are not allowed to make fixings into walls and ceilings. Therefore, this product is designed to adapt to a range of indoor spaces, have no fixings, use less floor space, use zero energy, use naturally rising warm air at ceiling height, allow clothes to dry properly by giving plenty space between items and provide enough space to dry large items such as bedding.

This product idea came from Camilla’s dislike of drying clothes. She realised through lots of interviews that many students had similar challenges which turned into researching why people living in flats have a range of issues when doing their weekly washing. What stuck out: clothes don’t dry properly. By understanding the range of variables that influence the ability of clothes to dry quickly, the High ‘N’ Dry was engineered to make drying clothes more effective. By reaching ceiling height, the couple degrees increase in air temperature can dry clothes quicker. This has been designed by a pulley mechanism which elevates clothes to ceiling height. By preventing clothes from overlapping, the exposed surface area is increased which greatly reduces the time to dry. The racks holding clothes were designed to spread out both vertically and horizontally.

am passionate about designing and engineering innovative ideas and solutions to improve people’s lives, embracing the fusion between creativity and technology. I enjoy the challenge of problem solving and the process of bringing creations to life, developing them from brainstorm concepts on paper, through CAD models and prototypes, to real, tangible finished products. The design process is an evolution, combining form and function through every iteration to create beautiful purposeful solutions.

The process of engaging with end users and fully understanding their requirements so that my designs provide efficient and appropriate solutions is really important to me. This process has been a significant part of my final year project, the design of a unique, wearable phototherapy device for the home treatment of jaundice in newborn babies. In addition to meeting with families, I worked closely with medical specialists to understand the complex issues involved, immersing myself in the field of specialist medical design engineering and building confidence with stakeholder collaboration as well as new engineering skills.

enjoy working collaboratively, sharing ideas, receiving, and providing feedback to others. The camaraderie of my GSA PDE cohort has been amazing over the last five years and has helped shape me into the design engineer am today, learning and preparing me for what hope is an exciting future career.

Born n’ raised in the east end of Glasgow, I have found myself to be studying Product Design Engineering for the past five years. For my final year project I have created a new and improved tufting gun.

Tufting has been a hobby of mine for the last few years as it is such a fun way to make your own rugs or wall hangings but the current machines are more than daunting to use, not to mention they are highly dangerous.

This project has really been a case of combining two things I love in life and the end result is a super user friendly, unique and fun machine. It removes the need for tiring maintenance, or extra tools to change the pile height of the machine. The user is provided with clip in and clip out cartridges of different amplitudes and cuts out the unnecessary faff that tufting guns require now.

This project has really opened my eyes to the manufacturing and user journeys of products which hope to keep with me when furthering my practice.

8 9 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art
↘ cameronjamesmarr@gmail.com ↘ camillajlaing9@gmail.com ↘ ellie.kate.thomson@gmail.com ↘ uk.linkedin.com/in/ellie-thomson-514b071b7 ↘ emilygracemcgoldrick@gmail.com ↘ uk.linkedin.com/in/emily-mcgoldrick-516142230
Eleanor Thomson Emily McGoldrick

Finley Atterton Gabe Skeoch He Ng India Hay

Whilst studying Product Design Engineering I have developed a growing interest in materials, particularly regarding what they are made of and how they play an integral role in the ways in which we design, create, and interact with the world around us. Traditional practices teach that materials are merely interfaces to realise the functions of our designs. However, it is rarely considered possible to design the function into a material itself, in order to create something unique and wonderful.

Growing concerns over the state and future of our environment are highlighting the serious drawbacks of one of the world’s most widely used materials - plastic. The advanced properties of fossil-based plastics are less beneficial than we originally thought, allowing ‘disposable’ and toxic materials to outlast our lifetimes. Turning to nature for inspiration, we find alternatives and potential replacements to fossil-based plastics. Regenerative sources such as plants, animals, bacteria, and even our food waste, can contain key components to help tackle this problem.

Made From Beer is a production process that transforms brewer’s spent grain (a by-product of the brewing industry) and turns it into a mouldable and 100% biodegradable material that can be used to make truly disposable green products.

About 65%-78% of the spinal cord injury community experience spasticity, which is the uncontrolled tightening or contracting of the muscles. It causes extreme discomfort, severely impacting the lives of those affected. The most effective way to reduce spasms is to stretch the muscles regularly, however it is extremely difficult to do that without control of the legs. Thorough research into user’s current stretching routines found that there were no similar products on the market for independent stretching.

The Stretch Assistant is a portable, mechanical leg brace that helps paraplegics safely and independently stretch their legs. The device is designed to slide on from the front of the users leg, while they are sat in their wheelchair, and is operated in the same manner for either leg. The use of a ratchet strap, pulling a short lever, connected to the lower leg frame, provides the appropriate advantage to allow the user to lift their leg, and hold it in place. The device allows for 14 various angles of extension, for users with varying flexibilities, and has straps that allow the user to pull their foot towards them, and their upper body forwards, to intensify the stretch. The device would come in 3 sizes, each with a range of adjustability for maximum comfort, and design details ensure safe and easy operation.

Hi, my name is He.

am an extravagant person. love doing big display, and showing off what could do as much as possible. enjoy different challenges and exploring uncharted territory. The area have chose to tackle within this year’s project is sewing. Other skill which also possess are: kitchen, instruments, interior design…

Sewing was quite a fun thing to learn. The world of textile design is completely different to what I have known, and I am glad I was able to get a glimpse of it this year. This project had helped me understand what is it am wearing every day, and different ways our everyday clothing could be improved. It had also helped me see the inherit properties of textile, and how other product could benefit with a touch of textile. Like what they did with Google home. This is the fun thing about designing, the skill which possess are so transferable. Rapid research, prototype and general design helps me get up to speed in every area. Being able to work out of my comfort zone is definitely hard, but also something that I had came to enjoy.

What makes a theme park experience meaningful is whether it means something to you. Not only narratively, musically, visually, emotionally, but physically. Tactilely. Powerful experiences require powerful sensation.

TacTILE uses low-frequency vibration for floor-based sensation in theme parks. Whether it’s the rumble of a spaceship engine, the earth-shaking footsteps of a dinosaur, or the power of a supernatural force, TacTILE makes the magic real.

Its modular tile system is fully scalable, so no matter how big the attraction, TacTILE has it covered. The vibrotactile sensation is customisable across each individual tile, so theme park designers can finetune an experience for maximum immersivity.

Inspired by raised access flooring, TacTILE is compliant with the UK and USA’s raised floor safety regulations regarding load capacity. This, plus its simple electronics and straightforward installation, sets it apart from other haptic flooring solutions.

India is an aspiring theme park designer and engineer. When not studying, she writes and publishes articles about what themed entertainment means to the human experience.

10 11 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art
↘ fin.atterton@gmail.com ↘ @finatterton.design ↘ g.skeoch28@gmail.com ↘ he.stu.acc@gmail.com ↘ uk.linkedin.com/in/he-ng-91bb73177 ↘ indiasonoma.com ↘ india@indiasonoma.com ↘ @indiasonoma

am a product design engineer with a passion for user-centred medical industrial design. am particularly interested in using colour and form to make medical products more appealing and intuitive for the patient to use. This year my work has focused on wearable bio sensors, and I have enjoyed using CAD surfacing techniques, foam modelling, 3D printing and graphic design techniques to develop my final product, REM Track.

My MEng project documents the design of an at-home diagnostic tool for narcolepsy. The design problem identified was that the electroencephalography (EEG) system for measuring brain activity during polysomnography (PSG) overnight sleep testing is cumbersome, uncomfortable, and time consuming to set up. I was interested in exploring the concept of a ‘reduced EEG system’ that is compact, wearable, and uses a small number of channels to test for specific neurological conditions.

Using key insights from the neurology and sleep departments at the Glasgow Queen Elizabeth and Edinburgh Royal Infirmary hospitals, designed an overnight home sleep test device for narcolepsy detection. Technical results were used to decide on the most appropriate electrode configuration, key electronic components, and a suitable material. REM Track is worn around the head, and electrode leads are connected according to a colour coded system in the instructions for use (IFU).

I am a Product Design Engineer with a strong focus on inclusive and accessible design. I strongly value including comprehensive user feedback into my design process, to effectively incorporate elements human factors and understand the behaviours and characteristics of key users.

After working with the Female Engineering Society throughout my time at university, diversity has become a key focus which I prioritise within my work. strive to create products which meet the needs of diverse users and challenge traditional biases. This passion towards inclusivity extends to users with physical and mental impairments, and, as someone who has suffered from eyesight issues personally, have made this the focus of my final year project.

InSight is a product which aims to improve the communication between optometrists and their patients by displaying a 3D representation of the patient’s retina, whilst simultaneously showing how their vision may progress in future. This aids the patients understanding of their condition, which can reduce the negative emotional impact that vision loss can have on the individual. The product utilises dome projection technology controlled by a touch-screen device which can be used to store the patients scan and display the simulation of their vision.

As a product design engineer, my practice involves the ideation, design, and development of products from concept to production. My aim is to utilise my knowledge of materials, manufacturing processes, and user-centred design principles to deliver functional and visually appealing products that meet the needs of the target market. Ultimately, my goal is to create products that enhance the user experience and make a positive impact on people’s lives. For my final year project, I have been designing a Universal Stretcher Wheel Unit for UK Mountain Rescue teams. The wheel unit is compatible with the four main stretcher models used in the UK, making it a versatile addition to any team’s rescue equipment. Featuring a quick release Isofix mechanism, teams can easily attach and detach the stretcher wheel unit to any of their stretchers in seconds, without the need for any additional tools. The stretcher wheel unit has a robust frame made from high-quality aluminium 6061, making it lightweight and durable, perfect for use in mountain rescue scenarios. It also features a wide 26x4.0” bike tyre that can easily travel over all terrain, ensuring teams can descent quickly and efficiently, whether they’re dealing with rocky mountain paths or soft snow.

I am a product design engineer from Glasgow, who loves all things design and technology. I have a passion for creating solutions to everyday problems and love to talk to people to hear their needs as well as finding flaws within products today. By using both my design and engineering skills, I can create solutions that suit people’s needs, not only aesthetically but with the necessary technology to go along with it. For my final year project, I have been looking into a more reliable lighting solution for the use during power outages.Through investigations, I found a lot of the elderly feel very vulnerable during power cuts, with them worrying about falling around their home in the dark. That’s why created The Genie LED, a rechargeable table lamp with two functions. A simple solution which acts as a normal table lamp throughout the day but as soon as the power goes off, The Genie has an automatic illumination of an LED, that will never leave you in darkness again or scrambling around for a torch! It simply allows the user to gather their bearings as they are not flung into darkness, walk over to the illuminated lamp, remove the shade, unplug, and use as a portable device around the home for up to nine hours.

12 13 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art
Isla Weir Kate Gibson
↘ islaweir.iw@googlemail.com ↘ uk.linkedin.com/in/isla-weir-559015183 ↘ kate_gibson_24@icloud.com ↘ katiehancock.com ↘ ktfhancock@gmail.com ↘ kirsten.m1999@hotmail.com
Katherine Hancock Kirsten Mitchell

Creative, child-led, outdoor play has seen a massive decrease in popularity. In response to this, schools and other organisations are introducing loose parts play, an activity where children can build and shape their environment using repurposed parts.

The Big Clamp system introduces fun and exciting possibilities to this type or play. The set consists of three variants, Big Clamp, which provides an easy and robust method to combine and secure parts. Big Wheel, which supports the creation of cars and moving platforms, and Big Hinge, which can be used to build stable structures or add dynamic elements to a design.

As a product design student, am passionate about exploring different fields and breaking down the barriers between different design disciplines. When it comes to aesthetics, I prioritize not only the functional aspects of a product but also the way it looks and feels. I believe that a product should evoke a sense of warmth and fun for the user, and I strive to create designs that convey those qualities.

Furthermore, am committed to designing products that can benefit marginalized communities. hope to use my skills and creativity to address the unique needs of these groups and make a positive impact on their lives. I am excited about collaborating with people from different backgrounds and disciplines to apply my designs to various fields and meet the needs of a wider audience.

During my final year of study, I designed a silicone breathing rabbit lamp specifically for children with autism between the ages of 3 and 6. The lamp features a rubber bulb on the rabbit’s tail that can be squeezed to inflate and deflate the lamp, mimicking the rhythm of breathing. It also comes with lampshades made of various materials to accommodate the sensory preferences of children. This lamp is designed to help anxious children calm down through slow, rhythmic breathing, while also improving their attention and coordination.

am a Product Design Engineer whose practise revolves around iterative testing and making. My design process is defined through collaborations with stakeholders, and their feedback on prototypes and models is used to optimise and improve designs.

The WeeGuard was developed in collaboration with Forest Research to address the issue of pine weevil damage in saplings. Pine weevils are a significant pest in forestry and their management costs the Scottish forestry industry £40 million annually. The WeeGuard provides a physical barrier solution to replace the need for pesticides. Repeated testing with pine weevils allowed an optimal pine weevil stopping form to be defined. To ensure that the barrier would be easily applied to hundreds of saplings at a time, various opening methods were explored and tested. The application method was chosen and refined through iterative testing with tree planters to ensure that the final product met the needs of the industry. Current development in the field of biodegradable materials also heavily influenced the design process and design for manufacture. WeeGuard is designed with future materials in mind and will be functional with range of material properties.

My work focuses on design for genuine circularity, and using innovation to drive a circular economy. Product design engineering involves combining creative design and concept development with technical skills to ensure realistic and verified concepts. I am passionate about using these skills to genuinely improve lives by solving societal problems. My final project at GSA, “BALED”, is a concept for driving up the financial value of waste films & flexible plastics by making it easier for businesses to collect and recycle them. A literature review established key insights into plastic waste. Soft plastics are not economically viable to recycle due to their large volume and relatively low value and weight. Beyond research, meetings were undertaken with experts in the sector to garner further insights. A variety of potential mechanisms for compacting and constraining the material were devised and tested. Driving a commercial incentive for sustainability is vital to ensure that businesses are ready and willing to change, and I believe design engineering has an important part to play in this journey. Beyond research and development, I undertook digital modelling and physical prototyping to verify my final designs. The manual compaction mechanism is simple and cheap so that the design could be applied anywhere on the planet to drive better waste management.

14 15 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art
Kyle Carmichael Lanxi Zhang
↘ kylecarmichael7791@gmail.com ↘ lanxizhang2023@163.com ↘ matildaremijsen@gmail.com ↘ m.gartside@outlook.com
Matilda Remijsen Michael Gartside

This project proposes to the client the potential of Ambient Aperture Technology (AAT) for In-Ear Monitors (IEMs), used on stage by musicians during performances and sound checks. Compared to wedge monitors, IEMs allow reduced feedback and stage noise, more control over the user’s personal mix and, overall, an improved relationship between a musician and their music.

Despite semi-professional musicians looking to use IEMs, the project identifies the gap in the market for a product that meets the needs of these musicians. The environment in smaller venues in which semi-professional musicians perform imposes different requirements for the product which are currently not catered for in the market. Research proves that a leading problem experienced by the target market of semi-professional musicians is the isolation felt from ambient noise in the environment being blocked whilst wearing IEMs.

The project presents the need for the proposed solution: an IEM headset containing the unique AAT, which provides a method for users to control the amount of ambient noise passing into their ear canal. AAT eliminates the feeling of isolation experienced in the operational environment. The solution presented to the client allows musicians to take back control of their performance experience and engage with fans and fellow band members.

I am a designer who is an advocate of inclusive design, and this influenced my final year product design engineering project. The ability for older people to be able to perform the Sit to Stand motion is important for their general health and wellbeing, as well as for promoting independence.

Unfortunately, as people get older their muscle strength deteriorates, while degenerative conditions such as arthritis and Parkinson’s disease which limit mobility and muscle control become more prevalent. This in turn can negatively impact on their ability to perform the sit to stand motion. ‘Boost Buddy’ is a lightweight, portable sit to stand assist device which aids users to achieve the sit to stand motion. It is made up of a casing which acts as two hinged plates. An inflatable component is placed between these plates and inflates to force the plates apart. This causes the upper plate to pivot around its axis and raise the user steadily to 45. The device employs small, compressed CO2 cartridges to inflate the design. The inflation is controlled by the user with an easy-to-use controller with an up and a down button. The product comes complete with a comfortable fabric covered foam cushion, which can be easily removed for washing, and a carry handle to allow for easy carrying.

am an Irish designer with an eagerness to learn as much as possible about the world around me and apply it to my work. am very hands-on and love to challenge myself within different areas of design to tackle problems through physical and mechanical means. My focus is on sustainability through quality and longevity in design. like to solve problems with real solutions and create user centred, long lasting products that make a tangible and necessary difference to people’s lives. I have applied this ethos to my design of a stackable, changeable drum kit this year.

Drum kit design has stagnated in functionality for many years, but this product can revolutionise the market. Contemporary kits take up a considerable amount of room when not in use, they are loud, difficult to transport and expensive. Many percussionists who live in small spaces struggle to co-exist with their instrument. The Space Between kit revamps drum hardware design, displacing the drums’ fixed tuning mechanism to an external frame. This frame can be separated using simple latches, allowing the drum shell and head to be removed. This allows the drum kit to stack within itself for a 60% reduction in volume. The drummer can also access the drum heads with ease, allowing them to swap between practise, electronic and performance heads in less than a minute.

Oura is the world’s first, and only, dedicated Dynamic Neural radiance field camera system.

Designed to give product-videographers the opportunity to create moving, volumetric 3D scenes, and animate camera motion in post-production. This Process allows the videographer to create perfectly timed, stable, repeatable and editable camera paths. By replacing the complex and expensive mechanics of robotic motion systems with a static, AI driven product, Oura comes in at 5% of the cost.

Rather than moving a single camera around a subject, Oura consists of 3 panels, mounted on tripods, onto which a total of 18 camera modules can be attached to build an endlessly reconfigurable number of ‘bullet-time’ arcs. These cameras, operated via the users-phone, capture the scene from a variety of angles at once, and the in-sync-videos from across the rig are fed into a Neural network that teaches itself to recreate the scene in 3D, using the same ray tracing process seen in video-games.

This 3D reconstruction known as a D-NeRF, allows the user to implement unconstrained and dynamic virtual-camera-motion into their work that can be edited and adjusted in both it’s timing and movement to cut down the feed-back loop with their client.

16 17 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art
Molly Mitchell-Knight Molly Walker Owen Murphy
↘ mollymk@outlook.com ↘ mollywalker399@gmail.com ↘ omurphy436@gmail.com ↘ samrice85@gmail.com
Samuel Rice

Scott Waitt Yangchengzhi Zhou

Hi, I’m Scott, a graduating Product Design Engineering student with a strong passion for designing innovative sports equipment. Throughout my degree, have had the ability to explore my creativity and develop the necessary engineering skills that enable me to transform my ideas into a reality. For the past six months, have dedicated myself to my final year design project, which focuses on enhancing the boxing training experience. The prospect of incorporating new technology into a sport with such a strong and storied legacy presented an exciting challenge. Using the full range of skills I have acquired throughout the course, have created the Box-bot, a revolutionary training tool that transforms the capabilities of a standard boxing bag.

My aim was to design a training aid that would engage and challenge boxers beyond the limitations of a static bag, creating a more dynamic and effective training. The Box-bot is designed to cater to both commercial boxing gyms and individual boxers training at home. By using a cartesian coordinate configuration, it can move anywhere within a one-meter squared area, with two stepper motors controlling the movement along the X and Y axes. Its versatility in movement and ability to simulate realistic and unpredictable sessions, with unlimited combinations makes it a perfect tool for a more fulfilling workout.

I am a student studying product design. At the beginning of the year, I began to focus on designing products for the elderly. This customer group requires designers to be more patient and attentive to their needs. After doing primary research, I found that developing products that assist with standing and sitting could greatly benefit the elderly, who often need more physical support due to fragile legs and waists. Unfortunately, many products currently available on the market have the following disadvantages: high price, complex structure, and heavy weight. With this in mind, I decided to focus my efforts on developing a riser recliner with a simplified design.

I carried out standing test, seat angle test, and mechanical system measurement in stages and observed the rotating motion trajectories of the bascule bridge. There are several rotational mechanical systems, but I was particularly interested in gear and pulley-based systems. Taking into account factors such as cost, mechanical properties, and structural complexity, ultimately opted for a gear system to provide power support for the seat’s rotational motion. Additionally, a speed ratio between the large and small gears helps to reduce the torque during the seat’s movement. For the material, decided to use bamboo, which not only makes the product lighter and more environmentally friendly, but also significantly reduces costs.

18 19 BEng & MEng (Hons) Product Design Engineering The Glasgow School of Art
↘ scott.waitt@virginmedia.com ↘ zhouyangchengzhi@163.com

Also graduating; Rhiannon King and Surmya Goel

Cover image: Matilda Remijsen

Studio photography: Shannon Tofts

Design: Kat Loudon and Phoebe Willison

Headline typeface: Rules by Freddie Guthrie

Printed by The Newspaper Club on 55gsm improved newsprint.

All work shown remains the property of the designers and may not be reproduced in print or any other media without written permissions. Contact details for all work is provided on each page for any enquiries.

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.