HAVE YOURECEIVEDITPREVIOUSLY BUTTHEN STOPPEDRECEIVINGIT?
To CanadaPost, your Mailbox orSuperboxis designatedinoneof four ways -House,Apartment, FarmorBusiness.
Justheaddown to your localpostoffice andask your Postmaster to have yourMailbox/Superbox designatedas a“Farm”. Youshouldstartreceiving your copy oftheHorizon within acoupleofweeks. 83891005july24
-AnysubmissionsforClassifiedAdsshouldbemadetoDanPrzybylski by phoneat(250)784-4319oremailathorizon@dcdn.ca
-Allclassifiedadsubmissionsmustbereceived by theNorthernHorizon by Noon(BCtime)on FRIDAY,OCTOBER4TH,2024
SUBSCRIPTIONS
-SubscriptionstotheNorthernHorizonare available by contacting DanPrzybylski by phoneat(250)784-4319oremailathorizon@dcdn.ca orHeatherAnderson by emailatheather@fbcpublishing.com
Canola storage experts recommend that hot canola be put on aeration for cooling even if it’s dry. That’s because air currents within the bin can concentrate moisture at the bottom of the central core, creating a possible start point for heating.
Aeration will even out the temperature and moisture throughout the bin, preventing hot spots from occurring. The risk is higher with larger bins, which generally have less surface area relative to the volume, so natural cooling takes longer. The core will hold heat longer if not aerated.
arger bins also take more loads to fill, so there is greater chance that a load or two might be over eight per cent moisture. These spots would not necessarily be safe if temperatures are over 25 C.
When using aeration to cool canola that is very dry, fans can be shut off during the day on days when the air temperature is more than 5 C warmer than the grain. If the air temperature is close to or cooler than the grain temperature, keep the fans on. aving airflow is better than no airflow when it comes to preventing microbial action.
If the grain is not dry, continuous fan operation is recommended.
If canola was already aerated to cool it and remove respired moisture immediately after binning and if that canola is now dry, farmers can turn on fans on cool days or at night to achieve further cooling.
This article was originally posted at canolawatch.org. Reprinted with permission.
VO TEINTHEPROVINCIALELECTION
VOTE IN PERSON
You
Register
You
Af
still register when you vote, but voting will take longer Remember to bring ID when you go to vote
ELEC TION INTEGR IT Y
Visit elections.bc.ca/integrity to learn how Elec tions BC protec ts provincial elec tions in British Columbia and what you can do to help
Vote at a district electoral of fice
Votingat district elec toral of fices is available now during of fice hours until4 p.m. (Pacif ic time) on Final Voting Day.
Vote at advance voting
There are six days of advance voting: Oc tober 10 - 13 and 15 - 16, from 8 a.m. to 8 p.m. (local time).
Advance voting places will be closed on Oc tober 14 (Thanksgiving)
Vote on Final Voting Day
Final Voting Day is Saturday, Oc tober 19 Voting places will be open from 8 a.m. to 8 p.m. (Pacif ic time) on Final Voting Day.
WHERE TO VOTE
Visit wheretovote.elections.bc.ca to find voting places near you and when they are open
VOTE BY MA IL
To vote by mail request yourvoting package as soon as possible Visit elections.bc.ca/votebymail or call 1- 80 0- 661- 8683
CANDIDATE NOMINAT IONS
You can geta nomination package from your district elec toral of fice, oronline at elections.bc.ca/candidates
Completed nomination packages must be returned to yourdistrict elec toral of fice by 1 p.m. (Pacif ic time) on Saturday, September 28
DISTRICT ELEC TORAL OFFICE
Peace River North 1-10628 Peck Lane Fort St John, BC (778) 576-1120
Peace River South 536 115 Ave Dawson Creek, BC (250) 795- 4290
Prince George -Mackenzie 4900 AustinRd W
Prince George, BC (250) 649-2880
Hours of Operation (local time)
Monday - Friday 9 a.m. to 5 p.m. Saturday 10 a.m. to 4 p.m.
Advance voting days 8 a.m. to 8 p.m.
Serving the BC and Alberta Peace Region Since 1977
John Deere has launched a new Minimum Tillage Series In-Line Ripper and Coulter Chisel Series, a first for the company.
t offers increased wear component longevity and enhancing dependability, while the chisel series achieves a working speed of km h.
“The new eries has been developed to give farmers the ability to tackle primary tillage needs faster than before,” said ichael Porter, ohn eere go to market manager for tillage equipment. “ ith working speeds of seven mph, this is a highly productive primary tillage tool.”
arking ohn eere s entry into the coulter chisel market, the eries combines robust residue management with deep soil penetration, making it an ideal tool for primary tillage.
Available in five models, with , , , or standards at inch spacing, the eries is a tillage tool designed to reduce compaction, size and anchor residue, while offering a range of field finish options.
Available in configurations with , , or standards, the MT Series is designed to manage soil compaction while minimi ing soil disturbance.
or operators who prefer to use large row crop tractors or four wheel drive tractors without a three point hitch, the , and standard implements are available with a drawn or integral hitch option. The standard is only available with an integral hitch, which is in the mainframe of the implement, providing a strong connection point for towing.
Positioned for deep tillage operations, reaching depths of to inches, the T eries is an advanced tillage implement that offers soil conditioning to support healthy plant growth and crop yields.
Both the eries and T eries are equipped with features aimed at enhancing durability and operational efficiency.
The eries utili es . inch spaced inch straight coulters using TruSet down pressure standard that reaches a , pound trip force to cut residue. The new standard allows the operator to achieve a working speed of seven mph at a depth of seven inches, increasing productivity and allowing coverage of more acres per day.
Additionally, the Pro inish eveling ystem provides various configurations for field finish, tailored to different geographical preferences and crop residues. ompared with the or ombination ipper, the eries has faster ground speeds and less operational input cost with less horsepower required to work the same acreage.
“ e know farmers are consistently looking to lower input cost and increase their productivity and efficiency,” Porter said.
“The eries gives them the ability to work wider and faster, which in turn allows them to tackle whatever challenge is next, sooner.”
Designed with CADEN Edge wear coating, the MT eries has an increased wear component longevity, with life expectancy of critical parts extended by per cent.
“The last thing an operator wants to worry about is replacing wear parts in the middle of a season, slowing down productivity,” Porter said.
“ ith the extended wear coating on the T eries, it increases wear part life expectancy and reduces
replacement intervals. The T eries delivers a highly productive and easy to set, minimal maintenance solution to breaking up soil compaction.”
Both the CC Series and MT Series are designed to integrate with precision agriculture technologies. All CC Series models and MT Series drawn models come base with Tru et Active, allowing for in cab setting ad ustments for depth control on the go.
armers can document their tillage work and it will be sent wirelessly to their ohn eere perations enter account via a ink connection. nce in center, farmers can see a till -
age documentation map showing how deep they were tilling.
or producers preparing to bring autonomy to their operation, the eries and chisel plow will come autonomy ready in base from the factory.
All eries will come equipped with a receiver mast, implement receiver harnessing and lighting package. A customer will ust have to add a universal tar ire receiver.
“By equipping the new eries with autonomy ready features, ohn eere is paving the way for the future of farming,” Porter said.
2 tbsp (30 ml) chopped fresh thyme (optional) 1/2 cup (125 ml) shredded aged Canadian cheddar
2. Peel potatoes; slice into rounds no thicker than 1/8 inch (0.3 cm). In a medium saucepan, melt butter over medium heat add garlic and salt. tir one minute. hisk in flour until combined. radually add cream, whisking until combined. Bring to a boil, whisking occasionally until thickened, for two to three minutes.
3. Layer half the potatoes in an 8x8-inch (20x20 cm) baking dish. Scatter with half the thyme. Top with half the cream sauce. Repeat with remaining potatoes; drizzle remaining cream mixture over top. Press potatoes to even out layers and coat in cream. Cover with foil.
4. Bake for 30 minutes.
5. Remove from the oven and sprinkle with cheddar cheese and remaining thyme. Bake uncovered for 15 minutes until bubbling and top is a deep golden brown. Remove from oven and let stand for 10 minutes.
not availablenot available$8.26 (+$0.00) December2024 notavailablenot available$8.24 (+$0.00) Januar y2025 not availablenot available$8.18 (+$0.00) Februar y2025 not availablenot availablenot available
)$7.46 (+ $0.05 )$7.66 (+$0.04) Januar y2025
$7.25 (+ $0.05 )$7.54 (+ $0.04 )$7.70 (+$0.03) Februar y2025
Oc tober2024
November2024
December2024
$7.29 (+ $0.05 )$7.58 (+ $0.04 )$7.77 (+$0.04)
$9.80 (- $0.01 )$9.85 (- $0.02 )$9.92 (-$0.02)
$9.68 (- $0.02 )$9.82 (- $0.02 )$9.78 (-$0.03)
$9.45($0.00 )$9.65 ($0.00 )$9.54 ($0.00)
$9.42 ($0.00 )$9.62 ($0.00 )$9.48 ($0.00)
Januar y2025 not availablenot availablenotavailable
Februar y2025 not availablenot availablenot available
*Centralincludestheareafrom Calgar ytoEdmonton
Cattle Directory
ANGUS
Binks Angus Farm
Evan Binks, Grande Prairie, AB 780-518-2020
Brandl Cattle Co.
Byron & Gwen Brandl, Jarvie, AB 780-954-2599
Broken Stick Ranch
Black Angus for Sale off the Farm
Tom & Amber Ditner, Baldonnel, BC
250-794-7105
Crestland Farms Ltd.
John Harms, Buffalo Head Prairie, AB (C)780-926-9540 (H)780-928-4649
Excel Ranches
Ron & Barb Miller, Cody & Amy Miller Westlock, AB 780-349-0644
Fourth Creek Angus Ranch
Ryan Lacey, Spirit River, AB Ryan 780-864-7753 / Office: 780-517-3507
Friesen Farms
Chad & Anna Friesen, Grande Prairie, AB Chad 780-831-9106 / Anna 780-831-8338
Gomack Red Angus
Braydon Gough & Scott Gough Whitelaw, AB 780-274-0099 / 780-618-4747
Horizon Red Angus
Philip Driedger, La Crete, AB 780-926-5896
GRA-TAN Farm
Grant & Tanya Chittick, Mayerthorpe, AB 780-284-0684
Crystal Chittick, Mayerthorpe, AB 780-204-2005
Heart Valley Angus
Nat Tschetter & Chris Tschetter Wanham, AB 780-978-6407 / 780-978-6406
Kjos Black Angus
Marty & Miriam Kjos, Fort St. John, BC 250-787-0970
Lakeroad Black Angus
Jim & Donna Rowe, Worsley, AB J 780-835-0455 / D 780-835-9588
Lazy B Livestock
Trevor Binks & Melanie Klassen Grande Prairie, AB 780-539-7128 / 780-518-0630
Nicklason Stock Farm
Brad Nicklason, Deadwood, AB 780-836-5197
Northway Cattle Co. Hwy 64 & RR 94.5, Cleardale, AB Albert 780-834-7055 Peter 780-835-8291
Mountain Side Angus
Bulls for Sale by Private Treaty
John & Judy Mayer, Beaverlodge, AB 780-831-8497
Rio Grande Angus
Clint & Anna Collins, Beaverlodge, AB Clint 780-814-1455 Anna
Silent K Stock Farms
Delano & Megan Kjos, Tomslake BC D 250-467-9450 / M 403-804-1107
Kirk Seaborn, Rocky Mountain House, AB 403-322-0142 / 403-729-2267
Janell Shorthorns
Melanie Barkley & Michelle Duncan Stettler, AB 403-740-4958
Poplar Creek Farm
Sean & Michelle Thompson, Cremona, AB 403-681-8316
Sharom Shorthorns
Tom & Shari Barto, Thorhild, AB 780-307-4043 / 780-398-2093
Starbright Shorthorns
Rena Nelson, Bonnyville, AB 780-201-2785
Trieber Farms
Fred & Naomi Trieber, Beaverlodge, AB F 780-831-1346 /N 780-814-0052
SIMMENTALS
Albrecht Farms
Steve, Tammy & Ryan Albrecht, Spirit River, AB R 780-933-5448 / S 780-832-0883
Blazin" J Simmentals
Darcy & Caitlyn Lind, Sunset House, AB D 780-536-5203 / C 780-552-4934
Clearwater Simmentals
Chad Smith, Olds, AB 403-586-4714
Crystal Springs Ranch
Eckbert & Crystal Weitzel
Georg & Sarah Weitzel Charlie Lake, BC 250-263-8237
KMR Simmentals
Kent & Robin Malcomson, Grovedale, AB 587-298-5404
Kruger Farms
Ryan & Chelsea Kruger, Sundre, AB 403-586-0125
KSL Simmentals
Keegan Scorgie & Brad Smith Beaverlodge, AB K 780-518-6572 / B 780-202-0254
Lakeroad Black Angus
Jim & Donna Rowe, Worsley, AB J 780-835-0455 / D 780-835-9588
Lakeroad Simmentals
Sarah Hayward & Kody Rowe, Worsley, AB 780-835-8841
M.C. Quantock
Mac & Pat Creech, Lloydminster, AB 800-561-2855
TAMARACKSHORTHORNS
AlvinJohnson|Brownvale,AB
Cell:(780)618-9044|ajohnson_1959@icloud.com
Gardner Livestock
Olds, AB
Tracy Gardner 403-586-0378
Tyson Gardner 403-586-1598
GB Farms
Garrett Biggelaar, Lacombe, AB 403-877-7661
GRA-TAN Farm
Grant & Tanya Chittick, Mayerthorpe, AB 780-284-0684
Crystal Chittick, Mayerthorpe, AB 780-204-2005
Hodges Simmentals
Roy & Scot Hodges, Beaverlodge, AB 780-512-4669
KIN-KIN Cattle Co.
Gary & Faye Chittick, Mayerthorpe, AB 780-786-4500
Farms
Joe & Lindsay Loomis, PRRD, BC 250-784-5150
Rachido Ranch
Randy & Donna Chittick, Mayerthorpe, AB 780-674-1986
Rosefield Simmentals
James & Martha Wiebe, Prespatou, BC 250-630-2621
Sadlier Cattle Co.
Todd Sadlier, Hines Creek, AB 780-772-3978
Short Grass Farms
Kurtis & Chelsie Dillabough, DeBolt, AB 780-402-9578
Southpaw Cattle Company
Ron & Tammy Daley, Carstairs, AB
Brandon & Shallaine Sharpe, Carstairs, AB 403-519-3401
Swantewitt & Sage Simmentals
Yellowhead County, AB Gerd 780-712-2096
Jordan 780-712-3600
Whiskey Jack Black Herefords & Simmentals
Tamara & Darcy Kuriga, Whitelaw, AB 780-834-7108 / 780-835-8090
Willowdale Simmentals
Dale & Judy Smith & Family, Valleyview, AB 780-558-9337 / 780-524-2790
Wolfe Farms
Tony Wolfe, Valleyview, AB 780-524-9322
Wolfe Lake Farms Inc.
Olin and Sarah Rosvold, La Glace, AB
Tarril and Kare Rosvold, La Glace, AB 780-518-1997
Wolfes Fleckvieh
Shane & Shannon Wolfe, Sundre, AB 403-556-0729
AUCTION FACILITIES/ LIVESTOCK EXCHANGES
B.C. Livestock Producers Co-operative Cordy Cox, Kamloops, BC 250-573-3939
Innisfail Auction Market
Danny, Mark & Duane Daines, Innisfail, AB 403-227-3166
Jennings Martin Direct Buying La Glace, AB
Jennings Martin 780-933-1023 Ron Kramer 250-793-2713
Viking Livestock Market
Cliff Grinde, Viking, AB 780-336-2209
VJV Livestock Marketing Group
Office, Dawson Creek, BC 250-782-3766 Office, Beaverlodge, AB 780-354-2423 Office, Westlock, AB 780-349-3153 Office, Ponoka, AB 403-783-5561 Office, Rimbey, AB 403-843-2439
Wembley Livestock Exchange
Glen Mayer & Nolan Mayer, Wembley, AB G 780-897-9570 / N 780-518-0709
Treated seed residues can present a serious risk to human and animal health at certain levels, so grain elevators must maintain a zero tolerance for treated seed in grain deliveries.
Health Canada has set maximum residue limits for many chemicals in grain, including those used to treat seed. Any grain that exceeds these limits may be condemned and destroyed.
To prevent treated seed contamination:
• Clean up spills and dispose of leftover treated seed as required by the province or municipality
• Use a seed bag collection program if one is available
• Use dedicated bins for treated seed if possible
• Clean all equipment, bins and vehicles thoroughly after seeding and before harvest
• Visually inspect equipment and bins for treated seed:
- before harvest
- before transferring grain between bins
- before transferring grain to a truck or railcar for delivery
Just two weeks after the death of Joan Oberle, the family of Frank Oberle sadly shares the news of his death on the night of Thursday, September 12, 2024, at the age of 92 years. e died peacefully and without suffering.
Frank was predeceased by his wife Joan (Kistner), his sister Lina Sattler, his two brothers Erich (Edith) and Ludwig (Hilde), his parents Adolf and Rosa (Leibold) and his sonin-law Michael Vaira. Frank is survived by: daughters Ursula Vaira (Gordon May) and Isabell (Gary) Hayes; sons Frank (Debbie) Oberle Jr. and Peter (Kelly) Oberle; grandchildren Mario (Robyn) Vaira and Jess Vaira, Lisa Hayes (Jordan Townsend), Jennifer Hayes, Kevin (Leanne) Oberle, Sadie Oberle (Tyrell Johnson) and Asia Oberle; greatgrandchildren Kaden, Aria, Zai, Grady, Henley, Emersyn; and his nieces, nephews and their families in Germany.
Frank was born in Forchheim, Germany and immigrated to Canada in 1952. His determination for a new life started him on a journey that no one could have envisioned. It began in Canada as a baker, logger, miner, and insurance salesman. In Chetwynd, British Columbia, he became a business owner and town Mayor. The culmination of his full and varied career was an incredible 20-year period representing the Prince George Peace River riding as their Federal Member of Parliament. Frank held many Cabinet positions in Ottawa. In particular, as a member of the Privy Council, he served as Critic for Mines and Forestry, Parliamentary Secretary to Minister of State (Mines), Minister of State (Science and Technology), Minister of State (Forestry) and Minister of Forestry. Upon retirement, Frank authored two autobiographical books.
Frank was a loving husband, father, grandfather (Opa) and great grandpa. Nothing made him happier than celebrating family accomplishments. He was the family’s biggest cheerleader. If Frank was asked what advice he would leave his family, it would certainly be this – if you want to do something worthwhile, go make someone else’s life better. It was his mission in life to help those less fortunate and to leave the world a better place. Dad – mission accomplished! We are all very proud. Rest in peace, we miss you and love you forever.
A private family celebration of life will be held at a later date. Donations in Frank’s memory may be made by sponsoring a child through Plan Canada (Plancanada.ca) – one of many charities that he and his wife supported.
Funeral Chapel
Are you stoked for storage?
Council of Canada
All canola should be conditioned shortly after it goes in the bin. Canola that goes into the bin hot is at much higher risk of spoilage, and conditioning will reduce the grain temperature. It will also help dry down dockage, which may have higher moisture content than the seed.
Note that straight combined canola may have greener dockage, which could add to the storage risk. Movement of air through conditioning will also help remove moisture from this dockage.
The first four to six weeks after putting canola in the bin is the most critical time. Storage risk is reduced significantly when canola moisture is eight per cent or lower and temperature is 15C or lower.
If it has been hot and dry while harvesting, be sure to cool that grain fast. Canola binned hot, even if it has low moisture, low dockage and low green, should still be put on aeration.
Target a core temperature of 15C at harvest time, and watch throughout the winter to make sure it doesn’t increase.
xternal temperatures moving from hot to cool in a few days create perhaps the worst situation for safe canola storage. A wide temperature differential between hot grain inside the bin and cool air outside sets up strong convection patterns in the bin. Moisture will be moving and concentrating at the top of the top middle core.
If it looks like it may be a wet harvest, dry anything above 10 per cent moisture. Natural air drying — your standard aeration fan — should do the trick if the air
is warm with low humidity and if canola moisture is just a point or two above 10 per cent.
A dryer may be required for canola above 12 per cent. Keep in mind that a bin’s average moisture might be dry, but a couple tough loads could have gone in, or small areas within each load may have been harvested from weedy slough patches and have higher moisture and higher dockage. These small pockets of moist grain and dockage could create a start point for heating.
emember how canola storage differs from that of cereals. anola contains approximately per cent oil, which makes it much more volatile in the bin than cereal crops. Consider conditioning canola, even if this wasn’t required for cereal grains, and check canola bins on a regular basis.
If you straight cut canola, there is a chance of elevated green seed and/or pockets of high moisture within the bulk material. Condition it immediately after binning, even if the canola is largely dry and cool.
If you harvest much sooner after swathing than expected, turn on the fans for the first couple days to condition the canola. There is observational evidence that canola that has quickly cured in the swath is more prone to volatility or heating in the bin.
This could potentially be due to the degree and rate of respiration being higher, which has also been hypothesized for canola that is straight cut. Even if this isn t the case, the first hours of conditioning remains critical to stabilize the bulk.
This article was originally posted at canolawatch.org. Reprinted with permission.
Canola
$50,000Down
1023E CO PACTUTI IT TRACTORWIT OA ER downo er available or alimitedtime.First paymentrequired at time o purchase. oadersare actory installed.Itemsmay notbee actly as shown,accessories, attachments, andimplements cost e tra.ta es,set-up, delivery chargesnot included.Prices arebased on theUSe changeandmay besub ecttochange.A documentation eeo upto willbeapplied toallfinanceo erings.Additional ees mayapply.Programsand prices sub ecttochangewithoutnotice. SeePrairieCoastequipment or ulldetails.Somerestrictionsapply.O er validuntil October , whilesupplies last.Financing on approved John eereFinancialcredit only. imitedtime o erwhich maynot be combinedwith othero ers. Ew loader. $26,495 $29,549 SA IN S Re ular Pri e SA
Alberta Grains supports Global Agriculture Technology Exchange
Alberta Grains
Awlberta rains has announced its significant financial commitment to the Global Agriculture Technology Exchange initiative, approving an investment of , ,
This funding is part of a broader . million collaboration involving key agricultural organi ations across anada, including ask heat and anitoba rop Alliance.
The ate initiative, spearheaded by ereals anada, aims to create a state of the art facility that will serve as a hub for market access, development and inno vation within anada s cereals sector.
This new facility is poised to enhance anada s standing as a global leader in agricultural exports, providing crucial infrastructure to support the continued growth and competitiveness of the cereals industry.
“Alberta rains recogni es the critical role that market access and develop ment play in maintaining our competitive edge on the global stage,” said reg ears, Alberta rains egion director.
“The ate initiative will not only reinforce our existing markets but will also open new avenues for growth and innovation, ensuring that Alberta s wheat and barley producers remain at the forefront of global trade.”
This investment aligns with Alberta rains ongoing commitment to advance agricultural technology and innovation. The ate facility will serve as a central point for training and testing, building on the momentum that ereals anada has established over the past five decades.
“The ate initiative represents an exciting leap forward for the grain sector by fostering collaboration and innovation, which will play a pivotal role in securing the future of anadian grains on the world stage,” said Alberta rains executive director ike lynn.
“Alberta rains fully supports the ate initiative, as it directly aligns with our goals of driving research forward, fostering economic growth and ensuring sus tainability for our farmers.”
Approval of this funding is conditional upon securing additional financial sup port from government entities and other funding partners.
PeaceCountry Hockey Schedule
NORTHPEACEHOCKEY LEAGUESEASON2024-2025
DATE TIME AWAY
Sat, Oct198:30 p.m.Dawson CreekSr. Canucks Fort St. JohnSr. Flyers
Sat, Oct198:30 p.m.Spirit River Rangers Grande Prairie Athletics
Fri, Oct258:30 p.m. Falher Pirates Manning Comets
Fri, Oct258:30 p.m. Fox Creek Knights Grande Prairie Athletics
Sat, Oct268:30 p.m.Dawson CreekSr. Canucks Fox Creek Knights
Sat, Oct268:30 p.m. Fort St.JohnSr. Flyers Falher Pirates
Sat, Oct268:30 p.m.Spirit River Rangers High Prairie Regals
Fri,Nov18:30 p.m. High Prairie Regals ValleyviewJets
Sat, Nov308:30 p.m.Spirit River Rangers ValleyviewJets
Thurs, Dec58:30 p.m. Fort St.JohnSr. FlyersSpirit River Rangers
Fri, Dec68:30 p.m. High Prairie Regals Fox Creek Knights
Fri, Dec68:30 p.m. Manning Comets ValleyviewJets
Sat, Dec78:30 p.m. Falher Pirates Manning Comets
Sat, Dec78:30 p.m. Fox Creek Knights Dawson CreekSr. Canucks
Sat, Dec78:30 p.m.Grande Prairie AthleticsSpirit River Rangers
Sat, Dec78:30 p.m. ValleyviewJets Fort St. JohnSr. Flyers
Guidance on showing cattle in U.S.
Canadian Food Inspection Agency
Since early 2024, the United States has reported outbreaks of highly pathogenic avian influen a in dairy cows in several states. Because of this, the anadian ood nspection Agency advises against all anadian cattle travelling to and participating in agricultural exhibitions in the . . at this time.
hile we understand the traditional and business significance of attending these events, the PA situation in the . . may pose a risk of introducing and spreading the virus into anada and may negatively impact the health of animals.
To protect your cattle from PA , the A does not recommend showing them at exhibitions. This particularly applies if there are cattle or poultry participating from states or regions where PA in cattle has been detected. ind out where PA has been detected in livestock on the . . epartment of Agriculture s website.
arious American agricultural exhibitions may have testing requirements prior to entry of cattle. This may vary from state to state and by exhibition. f you choose to participate, contact exhibition organi ers to find out what is required before you leave.
f you choose to travel with your animals to agricultural exhibitions in the . . despite the known risks, a certificate for all anadian cattle that are in the . . for less than days will be required.
The requirements for cattle returning from a temporary stay in the . . (any breed, any end use are available at https: inspection.canada.ca en animal health terrestrial animals diseases accredited veterinarians manual chapter .
The A AP certificate is available at https: www.aphis.usda.gov sites default files canadian origin cattle returning to canada influen a a.pdf. attle will be required to stay in the . . for days if they have resided on a premises (including exhibition sites where PA or any other contagious disease that cattle can contract, has been detected within the last days, or if they have been exposed to these diseases.
or dairy cattle, other measures will be required upon return to anada, including:
• isolating the imported cattle as per the Biosecurity for anadian airy arms: National Standard
• a formal quarantine may be issued when biosecurity measures are not sufficient to prevent potential spread of disease.
• bulk tank test by a veterinarian and testing of the individual imported dairy cattle, including heifers, between and days after return
• results must be shared with a A district office when they are received.
• if negative results are obtained, the animal can be re integrated into the herd
• if results are not received in a timely manner, the A will follow up and may conduct a disease investigation
• additional bulk tank test by a veterinarian days after re integration of imported animals into resident herd is recommended
• information on how to submit bulk tank samples to a anadian Animal ealth urveillance etwork lab can be found at PA in cattle: uidance for Private Veterinarians
• for more details refer to ighly Pathogenic Avian nfluen a in attle: etter for airy attle xporters or beef cattle, a recommended best practice is to isolate any animals for days after their return to anada as per the anadian Beef attle n arm Biosecurity tandard.
or more details, refer to ighly Pathogenic Avian nfluen a in attle: etter for Beef attle xporters
hile beef and dairy cattle are the same species, the risk of PA is currently higher for dairy cattle. hile beef cattle are likely susceptible, the differences in production and management practices (for example the use of milking equipment, higher density housing, and more contact with humans , there is an increased transmission potential for dairy herds.
t is the responsibility of the owner to understand the requirements and to ensure the appropriate documentation and requirements are met. Practicing good biosecurity is the best way to prevent the spread of animal diseases, including PA .
f you suspect PA in your cattle or any other animals, you must report it immediately to your local A office or district veterinarian under the ealth of Animals Act.
ALBERTAJUNIORHOCKEYLEAGUE 2024 –2035SCHEDULE
&STANDINGS
ateTI EVISITORHO ETEA A HLSHOWCASE AXBELLCENTRE CAL AR CANUC S AB
Thurs,Sept267:15p.m.FortMcMurrayOilBarons RAN E RAIRIESTOR Fri,Sept274:30 P.M. RAN E RAIRIESTOR CanmoreEagles
Sat,Oct126:00p.m.CalgaryCanucks RAN E RAIRIESTOR Sun,Oct132:00p.m.CalgaryCanucks RAN E RAIRIESTOR Fri,Oct187:00p.m. RAN E RAIRIESTOR DraytonValleyThunder Sat,Oct196:00p.m. RAN E RAIRIESTOR CamroseKodiaks Fri,Oct257:00p.m.DrumhellerDragons RAN E RAIRIESTOR Sat,Oct266:00p.m.DrumhellerDragons RAN E RAIRIESTOR Fri,Nov1 7:00p.m. RAN E RAIRIESTOR OldsGrizzlys Sat,Nov2 7:00p.m. RAN E RAIRIESTOR OldsGrizzlys Fri,Nov8 7:00p.m. RAN E RAIRIESTOR LloydminsterBobcats Sat,Nov 97:00p.m. RAN E RAIRIESTOR BonnyvillePontiacs
Fri,Nov157:00p.m.CamroseKodiaks RAN E RAIRIESTOR Sat,Nov166:00p.m.CamroseKodiaks RAN E RAIRIESTOR Sat,Nov237:00p.m. RAN E RAIRIESTOR DevonXtreme Fri,Nov297:00p.m. RAN E RAIRIESTOR LloydminsterBobcats Sat,Nov307:00p.m. RAN E RAIRIESTOR BonnyvillePontiacs Fri,Dec 67:00p.m.Drayton ValleyThunder RAN E RAIRIESTOR Sat,Dec7 6:00p.m.DraytonValleyThunder
Early adopters of impact mills surveyed
The Agronomist
Asurvey of early adopters of physical impact mills found that wild oat and kochia were the weeds most frequently mentioned as specific motivators for impact mill purchase. Average increased fuel cost for a mill was estimated at $1.40/ac., with average annual maintenance costs of about $1,500 per impact mill. ixty per cent felt the average payback time would be three to five years.
Harvest weed seed control is a tool to reduce the return of seeds to the soil seedbank at harvest. These tools include chaff carts, direct bale systems, narrow windrow burning, chaff lining or tramlining, and physical impact mills. n anada, research has focused on impact mills as the most likely adopted system on the Prairies.
Three integrated impact mills are on the market, and include the Harrington Seed Destructor from De Bruin Engineering, South Australia, the Seed Terminator from outh Australia, and the eed ontrol nit from edekop anufacturing in Saskatchewan.
An estimated impact mills were in use in estern anada in fall . nderstanding producer experiences with impact mills helps to identify knowledge gaps such as average fuel and maintenance costs, and provide direction for future research.
The objective of this study was to gain insight from early adopters on the Prairies to remove barriers to adoption and identify research and extension needs – ultimately to increase the adoption of harvest weed seed control as part of an integrated weed management program in anada.
A 49-question survey was developed and circulated to early adopters of impact mills on the Prairies. Ten producers responded, with a total of 18 mills on these farms. This accounted for 18 of an estimated 30 impact mills in use primarily on the Prairies. Two mills were used in Alberta and the rest in Saskatchewan.
One to four combines were equipped with mills on the farms, and the number of combines equipped with a mill averaged 75 per cent. On farms where mills were not installed on all the combines, the producers indicated the mills were used in weedy
areas, patches and areas such as headlands that are prone to higher weed densities.
Forty per cent of the mills were used on farms greater than 10,000 acres, and the mills were used in all their crops grown. This was likely due to the high capital cost of the mills, as well as the need for lass or larger combines to drive them.
The most common weed that motivated purchase of a mill was wild oat at 60 per cent of respondents. This was likely because wild oat remains in the top five weeds in Prairie weed surveys, as well as being one of the most common herbicideresistant weeds.
This was surprising because previous research found that wild oat was a poor candidate for harvest control because of early seed shed and poor retention of seed at harvest.
Wild oat was followed by kochia at 50 per cent, wild mustard at 30 per cent, and sow thistle, cleavers and volunteer crops at 10 per cent. Additionally, 30 per cent of producers indicated that all weeds were the motivation behind their purchase of impact mills.
The three primary goals were reducing/managing the weed seed bank at 40 per cent of respondents, managing current and future herbicide resistance at 50 per cent, and reducing weed densities was mentioned by 40 per cent of respondents.
Other comments included reducing chemical use, and reducing weed density prior to establishment of site specific application technology.
The three earliest adopters, one in and two in , reported an estimated reduction in weed densities by 75 per cent, 50 per cent and 60 per cent, respectively, for an average reduction of per cent. ochia was most often mentioned, but some commented that grass herbicide applications could also be reduced.
Two respondents indicated their herbicide applications were reduced by and per cent in the first three to five years of use.
Patch management was also seen as a benefit by some respondents. ochia and wild oat were both mentioned as problem weeds that had not spread in the field when mills were used. This provided the opportunity to target wild oat and kochia patches with residual herbicides.
ncreased fuel consumption was estimated to be . ac., ranging from cents to ac. Annual maintenance costs averaged , per mill, but ranged from $0 to $5,000.
SOME LIMITATIONS
The biggest limitation was plugging of the mill with green material, cited by 70 per cent of respondents. The need for swathing, desiccation or avoiding green patches during harvest were suggested as options to overcome this limitation. Later maturing kochia was noted as particularly problematic.
Seventy per cent of the respondents brought up the horsepower draw of the mills, which needed to be balanced with reduced speed and combine efficiency.
esearch needs identified were long term monitoring of efficacy on weed densities and differences by species, the interaction with precision spraying technologies, effect of adding an impact mill to combine operation and grain losses in return elevators and augers, and combine efficiency.
Several respondents summarized their thoughts:
• the impossibility of 100 per cent control due to seed shatter prior to harvest, header losses, etc.
• Don’t expect instant results.
• Adopt now and protect herbicide modes of action before it’s too late. Finally, the need to couple extension events with research and on-farm experiences was identified as a way to encourage adoption of harvest weed seed control.
The authors are grateful for the support of the Public Opinion Research group of Agriculture and Agri-Food Canada for their assistance in setting up the survey, in particular S. McLellan. We also appreciate the efforts of the mill manufacturers and distributors to get the survey link out to their customers. This research received no specific grant from any funding agency, commercial or not-for-profit sectors.
Dr. Breanne D Tidemann, Dr. Charles M. Geddes, and Dr. Shaun M. Sharpe. Early adopter insights on physical impact mill technology for harvest weed seed control in Canada. Canadian Journal of Plant Science.
2024 DAWSON CREEK EXHIBITION & STAMPEDE - CATTLE DIVISION
As aNorth American energy company, Enbridge believes that our business can play a critical role inadvancing reconciliation, and that means acknowledging the truth and learning from the past As we learn more, we strive to create a path thatwe can walk, together, towards reconciliation.
On thisNationalDay for Truth and Reconciliation, we encourage all to take time to listenand learn about the history and culture of Indigenous peoples.
What can you do?
Wear your orange shirt on September 30
Learn more by findingnew Indigenous social media contentcreators or podcasts
SupportIndigenous artists; listen to Indigenous musicians
Participate in local cultural events in your community
Discuss with your family what truth and reconciliation means and identify ways to take action
Tax credit milling more western wheat
Alberta Agri-News
Alberta’s food processing sector is the secondlargest manufacturing industry in the province and the flour milling industry generates millions in annual economic impact and creates thousands of jobs.
As Canada’s population continues to increase, demand for high quality wheat flour products is expected to rise. Alberta farmers grow about onethird of Canada’s wheat crops, so the province is wellpositioned to help meet this demand.
Alberta’s Agri-Processing Investment Tax Credit program is supporting this sector by helping attract a new wheat flour milling business to ed eer ounty.
P&H Milling Group, a division of Parrish & Heimbecker Ltd., is constructing a $241-million facility in the hamlet of Springbrook to mill about 750 tonnes of wheat daily into flour. The new facility will complement the company’s wheat and durum milling operation in Lethbridge.
“P illing roup s new flour mill pro ect is proof our Agri-Processing Investment Tax Credit program is doing its job to attract large-scale investments in value-added agricultural manufacturing,” says Alberta agriculture minister igurdson.
P&H Milling Group’s project is expected to create about 27 permanent and 200 temporary jobs. Byproducts from the milling process will be sold to the livestock feed industry across Canada to create products for cattle, poultry, swine, bison, goats and fish.
The new facility will also have capacity to add two more flour mills as demand for product increases in the future.
“This new facility not only strengthens our position in the Canadian milling industry, but also boosts Alberta’s baking industry by supplying high-quality flour to a diverse range of customers. e are proud to contribute to the local economy and support the agricultural community by sourcing 230,000 metric tonnes of locally grown wheat each year,” says ohn Heimbecker, CEO of P&H.
To be considered for the tax credit program, corporations must invest at least $10 million in a project to build or expand a value-added agri-processing facility in Alberta. The program offers a per cent non-refundable tax credit based on eligible capital expenditures.
Through this program, Alberta’s government has granted P&H Milling Group conditional approval for a tax credit estimated at $27.3 million.
“ e are grateful P illing roup chose to build here in ed eer ounty. This partnership will bolster our local economy and showcase our prime centralized location in Alberta, an advantage that facilitates efficient operations and distribution,” says im ood, mayor of ed eer ounty.
In 2023, Alberta’s food processing sector generated $24.3 billion in sales, making it the province’s secondlargest manufacturing industry, behind petroleum and coal.
That same year, just over three million tonnes of milled wheat and more than 2.3 million tonnes of wheat flour were manufactured in anada.
Alberta s milled wheat and meslin flour exports increased from $8.6 million in 2019 to $19.8 million in 2023, a 130.2 per cent increase.
emand for flour products rose in Alberta from 2019 to 2022, with retail sales increasing by 24 per cent during that period, according to Alberta government data.
VJV VIDEO SALES
(2) two-year-old Red and Black Angus bulls for sale by private treaty. 780-2740099 or 780-618-4747.
3 yearling Red and Black Angus bulls for sale by Private Treaty. 780-2740099 or 780-618-4747.
(2) two-year-old Red and Black Angus bulls for sale by private treaty. 780-2740099 or 780-618-4747.
Custom built livestock shelters, windbreak panels and rig mats built to order Delivery options. 780-5187469.
Association 16” Western saddle for sale. In good shape, $500. Call 250-7933139 or 250-827-3391.
Purebred Speckle Park 1-2 year old bulls. Lasting genetics. KD Ranch, Grande Prairie, AB. 780-882-3541.
For Sale: Black white-faced heifer yearlings, 2-yearolds, & more. Information: 250827-3843.
Registered whitefaced bulls. 70bw known as registered black Herefords. Yearlings, 2-yearolds, & more. Information: 250827-3843.
Buying Antiques: Coins, toys, advertising, tools & more. Willbuy bulk. Call/text 780-832-8216. Windbreak panels for sale with 2-7/8-inch pipe and 1.5-inch thick slabs. Delivery available. Call 403-894-7633.
2-MONTH-OLD Chesapeake/German Shepard pups for sale, $50 Each. Call or text 780-9261855.
ONE SETOF new Envy Apollo Q wheels for sale, 20x9. Call/text John 780814-4472.
1989 FORD TEMPO, automatic, easy on gas, has winter tires, $1000. 780494-2278, Hines Creek, AB. (3) Border Collie cross cattle working dogs for sale. Used on pasture, $500 OBO. 780-834-6548.
1992 DODGE GRAND Caravan for parts or repair, seats 7, 250,000 km, $300. Call 780-532-3766.
18” Kiefer all-purpose English saddle, 2 pads, 2 girths. Like new. $700. 250793-3139 or 250-827-3391.
1998 CHEVYBLAZER 4x4, about 150,000 kms, $800. Call 780-532-3766.
Looking for an older skidder for farmuse. $15 – 20,000. Call Jonathen 780-2851299.
Have Poplar/Spruce to log. Cypress Creek/Pink Mountain area. To start late Oct/early November. Call 250-772-5407.
12’x16’x12’HIGH shed for sale $2,500, must be picked up. 780-494-2278, Hines Creek, AB.
Ears to Hear, your local hearing aid provider, serving Athabasca and outlying areas. High Prairie Clinic, 1st Wednesday of every month at the Golden Age Club 10am-1pm. Athabasca Clinic, 3rd Tuesday of every month at the United Church 10am-1pm. Hearing tests, hearing aid cleaning and home visits. 780-228-5965, 587-746-0540. Call for info.
Full Grizzly Bear mount for sale/trade for guns. Made record book. Call for details 250-615-1583.
Attention cert/organic farmers. 100+ acres to rent, currently in mixed hay/grasses. Call for details 780-568-3495.
Looking fora Case/IH 8465A round baler in good working condition. Call Glen 780-836-0153. MIXED HAYBALES for sale. 70% Alfalfa, 30% Grass. $110/bale. Call Joe 780-524-7457, Valleyview, AB.
Round and square straw bales for sale. Located 12 kms Northeast of Manning, Alberta. 780-781-4457.
SpecialMarkets:Sept 7 1 : a m to 4: p m outh eace entennial useum wy 43) Oct26 1 : a m to 4: p m umpkin arket Contact:(403)608-8269orspcfarmersmarket@gmail.com
Berwyn erwynAg uilding 5 1 51st t) Sunday 1: p m to4: p m Aug 11 Sept 8 ct6
SpecialMarkets:Aug 1 1 : a m to 3: p m ac ardinal ioneer illage Sept 14 4: p m to9: p m arvest oon estival, rimshaw Contact:(780)625-4190,780-625-7248or farmersmarketberwyn@gmail.com
Enilda omen’s Institute all irst Ave, ot8 8) Saturday 1 : a m to 2: p m Aug 3 Sept 7 Oct 5 Contact:(780)523-4211orenildafarmersmarket2021@gmail.com
Fairview airview egion all 1 315 11 th t)
Wednesday 3:3 p m to6:3 p m Aug 7,14,21,28 Sept 4,11,18,25 SpecialMarkets: Aug 28 12: p m to 5: p m Contact: fairviewabfarmersmarket@gmail.com
GrandePrairie ig ed arn 1 32 1 1stAve) Wednesday 4: p m to7: p m Aug 7,14,21,28
Friday 4: p m to7: p m Aug 2,9,16,23,3 Sept 6,13,2 ,27 Oct 4,11,18,25
Saturday 1 : a m to 3: p m Aug 3,1 ,17,24,31 Sept 7,14,21,28 Contact:(780)814-8224orinfo@gpfarmersmarket.ca
HighLevel igh evel ports omple 1 1 1 1 5thAve)
Saturday 1 : a m to 2: p m July 6,13,2 ,27 Aug 3,1 ,17,24,31 Sept 7,14,21,28 Contact:highlevelfarmersmarket@gmail.com
HighPrairie– Marigold 4724 53rdAvenue
Wednesday 12:3 p m to 5:3 p m Aug 7,14,21,28 Sept 11,25 Oct 9,23 Contact:(780)523-4588
Kinuso inusoAg all 55 entre treet)
Saturday 1 : a m to 2: p m Aug 3,17,31 Contact:(780)805-4905orkinusoag@gmail.com
LaCrete ubilee ark 91 2 1 th treet)
Wednesday 3: p m to6: p m Aug 7,14,21,28 Sept 4,11,18,25 Contact:(780)928-4447orlacretefarmersmarket@gmail.com Manning oyal anadian egion 115 3rd Ave )
Friday 1 : a m to 1: p m Aug 2,9,16,23,3 Sept 6,13,2 ,27 Oct 4,11 Contact:(780)247-4989org58stahl@hotmail.com
PeaceRiver oltby oldings td 8 2 1 2ndAve)
Saturdays 1 : a m to 2: p m Aug 1 ,24 Sept 7,21 Oct 5,19 Contact:PRFMarket1991@gmail.com
Rycroft ycro Ag entre 5 1 49thAve)
Thursday 3: p m to6: p m Aug 1,8,15,22,29 Sept 5,12
SpecialMarkets:Oct 12 12: p m to 4: p m Contact:(780)831-8792or rycroftfarmersmarket@gmail.com
Sexsmith e smith urling ink 9913 99th t Tuesday 4:
Honouring heroes at Veterans Memorial Gardens and Interpretive Centre
Veterans Memorial Gardens and Interpretive entre is a place of reflection and tribute, home to three distinct war memorials that tell the stories of anada s bravest.
The first, the Afghanistan ar emorial, was designed by enee harbonneau to honor the anadian Armed orces soldiers who made the ultimate sacrifice in Afghanistan. This striking memorial stands as a solemn reminder of their courage and commitment. ast year, two powerful ndigenous ar emorials were added.
nfinity, designed by rant Berg, symboli es the unity of uropean and ndigenous orth American cultures, celebrating the birth of a unique identity: the tis.
nvisible, also designed by Berg, pays tribute to the hidden heroism of ndigenous soldiers whose bravery and sacrifice often went unrecogni ed, but whose efforts ensured the safe return of countless comrades.
(Photos iesel Powered Photography
ooking ahead, late this fall will see the installation of the oldiers of uicide emorial, with the omen of ar emorial to follow in . n the coming years, eterans emorial ardens will add more heartfelt tributes, including memorials for the iberation arden, Animals of ar, and a special commemoration for espatch iders and ree ode Talkers. Among these will be a tribute to harles “ hecker” Tompkins from rouard, who served as a despatch rider and later became a renowned ree code talker. ach of these memorials serves as a testament to the bravery, resilience, and unity of those who fought and served. Through them, eterans emorial ardens ensures that their legacies live on.
enee harbonneau, ollections anager Veterans Memorial Gardens & Interpretive Centre t rande Prairie AB T veteransmemorialgardens.com info veteransmemorialgardens.com
One of the services of the Canadian Grain Commission is the Harvest Sample Program, a voluntary program for grain producers to get an assessment of their grain’s quality.
The CGC sends participating producers a personalized kit, including postage-paid envelopes for the samples. Producers fill the envelopes with representative crop samples and mail them to the CGC.
“Producers should be taking samples of each load as the crop is placed into storage to create a representative sample for each bin,” says Neil Blue, provincial crops market analyst with the Alberta government.
“The goal is to have a sample that has the same characteristics as the large volume of product that it represents. Producers will then have a sample that can be used to shop around with various potential buyers.
“This program gives producers a free, unofficial grade on samples from the current year’s crop. Producers can submit samples of newly harvested crop prior to Nov. 30 and obtain base grade information for their marketing at no charge.
“This program also helps the Canadian Grain Commission and grain buyers to better know, in a general way, the quality of the crop,” says Blue.
The Harvest Sample Program can be used for cereal grains, pulses, canola, flax, mustard and soybeans.
The grading report includes the following information:
•unofficial grade for each sample submitted (unofficial because samples are not collected by a CGC inspector)
•dockage assessment on canola
•protein content on barley, beans, chickpeas, lentils, oats, peas and wheat
•oil, protein and chlorophyll content for canola
•oil and protein content and iodine value for flax
•oil and protein for mustard and soybeans
•falling number for wheat and rye
•vomitoxin levels for wheat, corn, barley and oats
“Individual reports remain confidential, but after collecting all the grade information, the CGC assembles and publishes aggregated data on crop quality, which is useful to both crop sellers and buyers in their trade decisions,” says Blue.
“The individual grade information from the CGC is valuable to producers as a base grade to help market their crops.”