Statement: This instruction content is being under a copy held by our company. Any update of this instruction content and product specification will not be in prior notice. This company reserves the right to change the specification and material been included without notice. And our company will no be responsible for any damage due to beliving material referring to(including consequential damage), including but not limited to mistprint and other errors related to this publication. If there is any update of the software, it sujects to instruction documentation of latest software version.
Technology Support:
Thanks for purchasing equipment from our company. Acquire relative support from service provider if finding any problem in product operation.
AT15 Long Standby Position Terminal Operation Manual
Precautions for Use:
● It need a SIM traffic card, to using the GPRS network to connect the cloud platform, while the GPRS service is provided by operators; It is suggested to use SIM traffic card with voice and short message function, if needing short
V1.0
1
II. Appearance of product
III. Convenient installation
2.1 Functional parameter
3.1 Open the front cover of the equipment and insert SIM into the card slot in a correct way; open the switch of buttery and install the front cover.
ＵＳＢ ｐｏｒｔ
Ａｎｔｉｓｋｉｄ ｇａｓｋｅｔ
ＧＰＳ Ｉｎｄｉｃａｔｏｒ（Ｇｒｅｅｎ）
Indicator light of Power (red)
ＧＳＭ Ｉｎｄｉｃａｔｏｒ（Ｂｌｕｅ）
top
Keep the light on:normal external electricity, network searching Flash every three seconds: normal external and normal network
4
When data is transmitting,
Light on: searching the signal of satellite position Slowly flash: satellite has been positioned Light on: searching the signal of satellite position Slowly flash:Charging
the light flashes three times per 200 seconds.
Light on: Full charging
When the green light turns from lighting to slow flashing, it means the work of satellite position is normal. The blue light turns from lighting to flashing per 3 seconds, which represents the operation of GSM is normal.
ＳＩＭ Ｃａｒｄ ｓｌｏｔ
anti-dismantlement button
The state of indicator light of equipment
Indicator light of GPS (green)
Ｐｏｗｅｒ Ｉｎｄｉｃａｔｏｒ（Ｒｅｄ）
5
● Please swith off the equipment when entering in wireless device forbidden area(such as airplane, medical site marked non-mobilephone using, gas station or oil depot, military control area and areas wire wireless launch device forbidden definitely). ● Please do no throw this product in fire or water, avoid explosion or environment pollution. Please keep products dry.
I. Functional Specification
1.1 Product functions Location and tracking, anti-screened alarm, zero-voltage alarm, low-voltage alarm, vibration alarm, movement alarm, over-speed alarm, electric fence and trace replay. 1.2 The field of application: It is especially applied to control the operation state of target and such fields as vehicle lease and mortgage guarantee.
3
VI. Working model
3.2 Observe the indicator light of equipment, the state of that light is described as follows:
Light off: equipment enters standby model
Ｍａｇｎｅｔ
Announcements:
2
Indicator light of GSM (blue)
Ｌｉｇｈｔ ｓｅｎｓｏｒ
Front cover
message or calling alarm, consulting the details from related operators; Please check the balance of phone call to ensure the normal using of data service,consulting the details from local distributors. ● It need to set the guardian number before achieving all the function; It only receive platfrom instruction before setting. ● Avoid approaching to other interference source, such as automobile data recorder,interphone and other vehicle communication terminal. ● Wireless remote control can only be emergency use when the wireless burglar alarm is out of control. ● It should be operated by professional personnel when change circuit of vehicle and other under-control equipments. Our company will take no responsibility if the damage of products and other property are caused by false operation. ● There is no internal repair parts in the equipment, please do not take it apart without authorization. Please send back to our company or appointed maintenence station. ● Please ask the service provider for the login method, download and install the mobile phone terminal APP.
6
4.1 Standby model It is the default that the position information will be uploaded at 9:00 everyday.It is the default that the position information will be uploaded at 9:00 everyday.The time and frequency of upload can be adjusted automatically. It can be setas several times per day (1-48 times per day) and many days per time (2-7 days per time). 4.2 Tracking model When the equipment is running, the position information will be uploadedevery 30 seconds. When it is static, the heartbeat data will be transmittedevery 3 minutes. 4.3 Model transformation When there is an anti-dismantlement and light sensation alarm, equipment willreport the situation to the platform and then turn into the tracking model. Underthe situation that equipment do not receive the order to release alarm, it will be continuous to track in 60 seconds and then recover the standby model automatically.
7