Fiberon Itemized Product Guide by TimberTown

ITEMIZED PRODUCT GUIDE

Table of Contents Decking Products Paramount

Horizon

Horizon Symmetry Collection

ProTect Advantage

ProTect Advantage FR (select markets only)

Good Life

Sanctuary (select markets only)

Deck Fasteners and Accessories Phantom Hidden Fasteners

Ballistic NailScrew Driver

Cortex Fastening System

Symmetry

Horizon

Good Life

Composite Railing Products

Deck and Rail Lighting Products Rail Lighting Options

Deck Lighting Options

Lighting Accessories

ADA Handrail System Components

Fiberon Care and Maintenance

Residential Limited Warranty

Commercial Limited Warranty

Stain and Fade Performance Limited Warranty

ADA Handrail System

Care and Maintenance

Warranty Information

DECKING PRODUCTS

Paramount PVC Decking Grooved Profile: • • • • •

Square Edge Profile:

Lightweight, easy-to-handle boards No organic compounds to promote mold growth Resists moisture, dents, and flames Meets/exceeds OSHA and ADA slip-resistance guidelines Low maintenance

Reversible: No Material: Polyvinyl chloride (PVC) alloy outer surface is co-extruded on three sides with a cellular PVC core Warranty: Lifetime Limited Performance Item Description

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Grooved Deck Board

Brownstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

Item Number CPBRDG BROWNSTONE 12

Grooved Deck Board

Sandstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

CPBRDG SANDSTONE 12

Grooved Deck Board

Flagstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

CPBRDG FLAGSTONE 12

Grooved Deck Board

Earthstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

CPBRDG EARTHSTONE 12

Grooved Deck Board

Fossil

Solid

5.5 in. x 1 in.

12 ft.

CPBRDG FOSSIL 12

Grooved Deck Board

Mineral

Solid

5.5 in. x 1 in.

12 ft.

CPBRDG MINERAL 12

Grooved Deck Board

Brownstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRDG BROWNSTONE 16

Grooved Deck Board

Sandstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRDG SANDSTONE 16

Grooved Deck Board

Flagstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRDG FLAGSTONE 16

Grooved Deck Board

Earthstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRDG EARTHSTONE 16

Grooved Deck Board

Fossil

Solid

5.5 in. x 1 in.

16 ft.

CPBRDG FOSSIL 16

Grooved Deck Board

Mineral

Solid

5.5 in. x 1 in.

16 ft.

CPBRDG MINERAL 16

Grooved Deck Board

Brownstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRDG BROWNSTONE 20

Grooved Deck Board

Sandstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRDG SANDSTONE 20

Grooved Deck Board

Flagstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRDG FLAGSTONE 20

Grooved Deck Board

Earthstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRDG EARTHSTONE 20

Grooved Deck Board

Fossil

Solid

5.5 in. x 1 in.

20 ft.

CPBRDG FOSSIL 20

Grooved Deck Board

Mineral

Solid

5.5 in. x 1 in.

20 ft.

CPBRDG MINERAL 20

Square Edge Deck Board

Brownstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRD BROWNSTONE 20

Square Edge Deck Board

Sandstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRD SANDSTONE 20

Square Edge Deck Board

Flagstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRD FLAGSTONE 20

Square Edge Deck Board

Earthstone

Multi-Chromatic

5.5 in. x 1 in.

20 ft.

CPBRD EARTHSTONE 20

Square Edge Deck Board

Fossil

Solid

5.5 in. x 1 in.

20 ft.

CPBRD FOSSIL 20

Square Edge Deck Board

Mineral

Solid

5.5 in. x 1 in.

20 ft.

CPBRD MINERAL 20

12 ft. and 16 ft. Square Edge Deck Boards for Special Order Only

Square Edge Deck Board

Brownstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

CPBRD BROWNSTONE 12

Square Edge Deck Board

Sandstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

CPBRD SANDSTONE 12

Square Edge Deck Board

Flagstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

CPBRD FLAGSTONE 12

Square Edge Deck Board

Earthstone

Multi-Chromatic

5.5 in. x 1 in.

12 ft.

CPBRD EARTHSTONE 12

Square Edge Deck Board

Fossil

Solid

5.5 in. x 1 in.

12 ft.

CPBRD FOSSIL 12

Square Edge Deck Board

Mineral

Solid

5.5 in. x 1 in.

12 ft.

CPBRD MINERAL 12

Square Edge Deck Board

Brownstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRD BROWNSTONE 16

Square Edge Deck Board

Sandstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRD SANDSTONE 16

Square Edge Deck Board

Flagstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRD FLAGSTONE 16

Square Edge Deck Board

Earthstone

Multi-Chromatic

5.5 in. x 1 in.

16 ft.

CPBRD EARTHSTONE 16

Square Edge Deck Board

Fossil

Solid

5.5 in. x 1 in.

16 ft.

CPBRD FOSSIL16

Square Edge Deck Board

Mineral

Solid

5.5 in. x 1 in.

16 ft.

CPBRD MINERAL 16

For the most up-to-date information, visit fiberondecking.com.

Paramount Fascia Fascia Profile: Reversible: No Material: Polyvinyl chloride (PVC) alloy outer surface is co-extruded on three sides with a cellular PVC core Warranty: Lifetime Limited Performance Item Description

Color

Color Pattern

Fascia Board

Brown

Solid

Dimensions .5 in. x 11.75 in.

Length

Pcs / Unit

12 ft.

Item Number CPFAS BROWN 12

Fascia Board

Sand

Solid

.5 in. x 11.75 in.

12 ft.

CPFAS SAND 12

Fascia Board

Earth

Solid

.5 in. x 11.75 in.

12 ft.

CPFAS EARTH 12

Fascia Board

Fossil

Solid

.5 in. x 11.75 in.

12 ft.

CPFAS FOSSIL 12

Fascia Board

Mineral

Solid

.5 in. x 11.75 in.

12 ft.

CPFAS MIN FLGSTN 12

For the most up-to-date information, visit fiberondecking.com.

Horizon Composite Decking Grooved Profile: • • • •

Square Edge Profile:

Striking looks emulate exotic, tropical hardwoods Reversible boards offer polished appearance on top and bottom PermaTech® surface material resists staining, fading, mold, mildew, and decay Cleans easily; no refinishing needed

Reversible: Yes Material: Durable PermaTech outer surface is co-extruded on four sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Ipe

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTHG IPE 12

Grooved Deck Board

Rosewood

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTHG ROS 12

Grooved Deck Board

Tudor Brown

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTHG TUDOR 12

Grooved Deck Board

Castle Gray

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTHG CSGRAY 12

Grooved Deck Board

Greystone

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTHG GRYSTN 12

Grooved Deck Board

Ipe

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTHG IPE 16

Grooved Deck Board

Rosewood

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTHG ROS 16

Grooved Deck Board

Tudor Brown

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTHG TUDOR 16

Grooved Deck Board

Castle Gray

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTHG CSGRAY 16

Grooved Deck Board

Greystone

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTHG GRYSTN 16

Grooved Deck Board

Item Number

Grooved Deck Board

Ipe

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTHG IPE 20

Grooved Deck Board

Rosewood

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTHG ROS 20

Grooved Deck Board

Tudor Brown

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTHG TUDOR 20

Grooved Deck Board

Castle Gray

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTHG CSGRAY 20

Grooved Deck Board

Greystone

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTHG GRYSTN 20

Square Edge Deck Board

Ipe

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTH IPE 20

Square Edge Deck Board

Rosewood

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTH ROS 20

Square Edge Deck Board

Tudor Brown

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTH TUDOR 20

Square Edge Deck Board

Castle Gray

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTH CSGRAY 20

Square Edge Deck Board

Greystone

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDTH GRYSTN 20

12 ft. and 16 ft. Square Edge Deck Boards for Special Order Only

Square Edge Deck Board

Ipe

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTH IPE 12

Square Edge Deck Board

Rosewood

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTH ROS 12

Square Edge Deck Board

Tudor Brown

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTH TUDOR 12

Square Edge Deck Board

Castle Gray

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDTH CSGRAY 12

Square Edge Deck Board

Ipe

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTH IPE 16

Square Edge Deck Board

Rosewood

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTH ROS 16

Square Edge Deck Board

Tudor Brown

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTH TUDOR 16

Square Edge Deck Board

Castle Gray

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDTH CSGRAY 16

For the most up-to-date information, visit fiberondecking.com.

Horizon Fascia Fascia Profile: Reversible: No Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Ipe

Multi-Chromatic

Fascia Board

Rosewood

Fascia Board

Tudor Brown

Fascia Board Fascia Board

Fascia Board

Dimensions

Length

Pcs / Unit

Item Number

.75 in. x 11.25 in.

12 ft.

HCFAS IPE 12

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS ROS 12

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS TUDOR 12

Castle Gray

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS CSGRAY 12

Greystone

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS GRYSTN 12

Horizon Riser Riser Profile: Reversible: No Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Ipe

Multi-Chromatic

Riser Board

Rosewood

Riser Board

Tudor Brown

Riser Board Riser Board

Riser Board

Dimensions

Length

Pcs / Unit

Item Number

.75 in. x 7.25 in.

12 ft.

HCRIS IPE 12

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS ROS 12

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS TUDOR 12

Castle Gray

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS CSGRAY 12

Greystone

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS GRYSTN 12

For the most up-to-date information, visit fiberondecking.com.

Horizon Symmetry Collection Composite Decking Grooved Profile: • • • • •

Square Edge Profile:

Low-gloss formulation and micro-texturing creates beautiful matte finish Rich, earthy colors and unique wood grain patterns enhance visual appeal Four-sided PermaTech protection ensures durability Same pattern on top and bottom extends versatility Pairs with Symmetry Railing for an elegant outdoor space

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Item Number

Grooved Deck Board

Burnt Umber

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDSYMG BRU 12

Grooved Deck Board

Warm Sienna

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDSYMG WMS 12

Grooved Deck Board

Cinnabar

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDSYMG CNB 12

Grooved Deck Board

Burnt Umber

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDSYMG BRU 16

Grooved Deck Board

Warm Sienna

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDSYMG WMS 16

Grooved Deck Board

Cinnabar

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDSYMG CNB 16

Grooved Deck Board

Burnt Umber

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDSYMG BRU 20

Grooved Deck Board

Warm Sienna

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDSYMG WMS 20

Grooved Deck Board

Cinnabar

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDSYMG CNB 20

Square Edge Deck Board

Burnt Umber

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDSYM BRU 20

Square Edge Deck Board

Warm Sienna

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDSYM WMS 20

Square Edge Deck Board

Cinnabar

Multi-Chromatic

5.4 in. x .935 in.

20 ft.

BRDSYM CNB 20

12 ft. and 16 ft. Square Edge Deck Boards for Special Order Only

Square Edge Deck Board

Burnt Umber

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDSYM BRU 12

Square Edge Deck Board

Warm Sienna

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDSYM WMS 12

Square Edge Deck Board

Cinnabar

Multi-Chromatic

5.4 in. x .935 in.

12 ft.

BRDSYM CNB 12

Square Edge Deck Board

Burnt Umber

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDSYM BRU 16

Square Edge Deck Board

Warm Sienna

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDSYM WMS 16

Square Edge Deck Board

Cinnabar

Multi-Chromatic

5.4 in. x .935 in.

16 ft.

BRDSYM CNB 16

For the most up-to-date information, visit fiberondecking.com.

Horizon Symmetry Collection Fascia Fascia Profile: Reversible: No Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Item Number

Fascia Board

Burnt Umber

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS BURNT UMBER 12

Fascia Board

Warm Sienna

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS WARM SIENNA 12

Fascia Board

Cinnabar

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS CINNABAR 12

Horizon Symmetry Collection Riser Riser Profile: Reversible: No Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Riser Board

Burnt Umber

Multi-Chromatic

Riser Board

Warm Sienna

Riser Board

Cinnabar

Dimensions

Length

Pcs / Unit

.75 in. x 7.25 in.

12 ft.

HCRIS BURNT UMBER 12

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS WARM SIENNA 12

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS CINNABAR 12

For the most up-to-date information, visit fiberondecking.com.

Item Number

ProTect Advantage Composite Decking Grooved Profile: • • • •

Square Edge Profile:

Elegant look of natural hardwoods Multichromatic colors with realistic wood grain patterns Three-sided PermaTech surface protection resists staining, fading, insects, and decay Composite construction ensures easy maintenance, lasting durability

Reversible: No Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Grooved Deck Board

Chestnut

Multi-Chromatic

Grooved Deck Board

Western Cedar

Multi-Chromatic

Grooved Deck Board

Gray Birch

Grooved Deck Board

Chestnut

Grooved Deck Board Grooved Deck Board

Dimensions

Length

Pcs / Unit

Item Number

5.3 in. x .93 in.

12 ft.

BRDPRTFG CN 12

5.3 in. x .93 in.

12 ft.

BRDPRTFG WC 12

Multi-Chromatic

5.3 in. x .93 in.

12 ft.

BRDPRTFG GB 12

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTFG CN 16

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTFG WC 16

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTFG GB 16

Grooved Deck Board

Chestnut

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFG CN 20

Grooved Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFG WC 20

Grooved Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFG GB 20

Square Edge Deck Board

Chestnut

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTF CN 20

Square Edge Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTF WC 20

Square Edge Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTF GB 20

12 ft. and 16 ft. Square Edge Deck Boards for Special Order Only

Square Edge Deck Board

Chestnut

Multi-Chromatic

5.3 in. x .93 in.

12 ft.

BRDPRTF CN 12

Square Edge Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

12 ft.

BRDPRTF WC 12

Square Edge Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

12 ft.

BRDPRTF GB 12

Square Edge Deck Board

Chestnut

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTF CN 16

Square Edge Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTF WC 16

Square Edge Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTF GB 16

For the most up-to-date information, visit fiberondecking.com.

ProTect Advantage Fascia Fascia Profile: Reversible: No Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Item Number

Fascia Board

Chestnut

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS CHESTNUT 12

Fascia Board

Western Cedar

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS WESTERN CDR 12

Fascia Board

Gray Birch

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS GRAY BIRCH 12

ProTect Advantage Riser Riser Profile: Reversible: No Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Item Number

Riser Board

Chestnut

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS CHESTNUT 12

Riser Board

Western Cedar

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS WESTERN CDR 12

Riser Board

Gray Birch

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS GRAY BIRCH 12

For the most up-to-date information, visit fiberondecking.com.

ProTect Advantage FR Composite Decking Grooved Profile: • • • •

Available in select markets only. Special order direct from Meridian, Idaho

Square Edge Profile:

Approved for use in Wildland Urban Interface (WUI) zones Elegant look of natural hardwoods in three multi-chromatic colors Three-sided PermaTech surface protection resists staining, fading, insects, and decay Composite construction ensures easy maintenance, lasting durability

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Grooved Deck Board

Chestnut

Multi-Chromatic

Grooved Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

12 ft.

BRDPRTFFRG CN 12

5.3 in. x .93 in.

12 ft.

BRDPRTFFRG WC 12

Grooved Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

12 ft.

BRDPRTFFRG GB 12

Grooved Deck Board

Chestnut

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTFFRG CN 16

Grooved Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTFFRG WC 16

Grooved Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

16 ft.

BRDPRTFFRG GB 16

Grooved Deck Board

Chestnut

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFFRG CN 20

Grooved Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFFRG WC 20

Grooved Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFFRG GB 20

Square Edge Deck Board

Chestnut

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFFR CN 20

Square Edge Deck Board

Western Cedar

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFFR WC 20

Square Edge Deck Board

Gray Birch

Multi-Chromatic

5.3 in. x .93 in.

20 ft.

BRDPRTFFR GB 20

For the most up-to-date information, visit fiberondecking.com.

Item Number

Matching ProTect Advantage fascia and risers are not fire-rated.

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Item Number

Fascia Board

Chestnut

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS CHESTNUT 12

Fascia Board

Western Cedar

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS WESTERN CDR 12

Fascia Board

Gray Birch

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS GRAY BIRCH 12

Pcs / Unit

Riser Board

Item Description

Chestnut

Color

Multi-Chromatic

Color Pattern

.75 in. x 7.25 in.

Dimensions

12 ft.

HCRIS CHESTNUT 12

Riser Board

Western Cedar

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS WESTERN CDR 12

Riser Board

Gray Birch

Multi-Chromatic

.75 in. x 7.25 in.

12 ft.

HCRIS GRAY BIRCH 12

For the most up-to-date information, visit fiberondecking.com.

Item Number

Good Life Composite Decking Grooved Profile: • • • • •

Square Edge Profile:

Delivers exceptional value, unbeatable durability Prefinished with a protective surface on three sides Resists mold and mildew Won’t rot, warp, or splinter like wood Easy to maintain; no costly refinishing

Reversible: No Material: Durable polyethylene (PE) outer surface is co-extruded on three sides with a wood and PE composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Item Number

Grooved Deck Board

Cabin

Solid

5.25 in. x .93 in.

12 ft.

BRDGDLG CB 12

Grooved Deck Board

Villa

Solid

5.25 in. x .93 in.

12 ft.

BRDGDLG VL 12

Grooved Deck Board

Cottage

Solid

5.25 in. x .93 in.

12 ft.

BRDGDLG CT 12

Grooved Deck Board

Cabin

Solid

5.25 in. x .93 in.

16 ft.

BRDGDLG CB 16

Grooved Deck Board

Villa

Solid

5.25 in. x .93 in.

16 ft.

BRDGDLG VL 16

Grooved Deck Board

Cottage

Solid

5.25 in. x .93 in.

16 ft.

BRDGDLG CT 16

Grooved Deck Board

Cabin

Solid

5.25 in. x .93 in.

20 ft.

BRDGDLG CB 20

Grooved Deck Board

Villa

Solid

5.25 in. x .93 in.

20 ft.

BRDGDLG VL 20

Grooved Deck Board

Cottage

Solid

5.25 in. x .93 in.

20 ft.

BRDGDLG CT 20

Square Edge Deck Board

Cabin

Solid

5.25 in. x .93 in.

20 ft.

BRDGDL CB 20

Square Edge Deck Board

Villa

Solid

5.25 in. x .93 in.

20 ft.

BRDGDL VL 20

Square Edge Deck Board

Cottage

Solid

5.25 in. x .93 in.

20 ft.

BRDGDL CT 20

12 ft. and 16 ft. Square Edge Deck Boards for Special Order Only Square Edge Deck Board

Cabin

Solid

5.25 in. x .93 in.

12 ft.

BRDGDL CB 12

Square Edge Deck Board

Villa

Solid

5.25 in. x .93 in.

12 ft.

BRDGDL VL 12

Square Edge Deck Board

Cottage

Solid

5.25 in. x .93 in.

12 ft.

BRDGDL CT 12

Square Edge Deck Board

Cabin

Solid

5.25 in. x .93 in.

16 ft.

BRDGDL CB 16

Square Edge Deck Board

Villa

Solid

5.25 in. x .93 in.

16 ft.

BRDGDL VL 16

Square Edge Deck Board

Cottage

Solid

5.25 in. x .93 in.

16 ft.

BRDGDL CT 16

Good Life Fascia Fascia Profile: Reversible: No Material: Durable polyethylene (PE) outer surface is co-extruded on three sides with wood and PE composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance

Item Description

Color

Color Pattern

Dimensions

Length

Pcs / Unit

Fascia Board

Cabin

Solid

.75 in. x 11.25 in.

12 ft.

HCFAS CB 12

Fascia Board

Villa

Solid

.75 in. x 11.25 in.

12 ft.

HCFAS VL 12

Fascia Board

Cottage

Solid

.75 in. x 11.25 in.

12 ft.

HCFAS CT 12

For the most up-to-date information, visit fiberondecking.com.

Item Number

Sanctuary Composite Decking

Available in select markets only.

Grooved Profile: • • • •

Square Edge Profile:

Three multi-chromatic colors look like natural wood High-traction grain pattern ensures solid footing Three-sided PermaTech protection offers outstanding surface durability Never needs sanding, staining, or refinishing

Reversible: No Material: Durable polyethylene (PE) outer surface is co-extruded on three sides with a wood and PE composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Color

Color Pattern

Dimensions

Length

Pcs / Unit

Grooved Deck Board

Item Description

Espresso

Multi-Chromatic

5.25 in. x .925 in.

12 ft.

BRDSANG ESPRESSO 12

Grooved Deck Board

Earl Grey

Multi-Chromatic

5.25 in. x .925 in.

12 ft.

BRDSANG EARL GREY 12

Grooved Deck Board

Latte

Multi-Chromatic

5.25 in. x .925 in.

12 ft.

BRDSANG LATTE 12

Grooved Deck Board

Espresso

Multi-Chromatic

5.25 in. x .925 in.

16 ft.

BRDSANG ESPRESSO 16

Grooved Deck Board

Earl Grey

Multi-Chromatic

5.25 in. x .925 in.

16 ft.

BRDSANG EARL GREY 16

Grooved Deck Board

Latte

Multi-Chromatic

5.25 in. x .925 in.

16 ft.

BRDSANG LATTE 16

Grooved Deck Board

Espresso

Multi-Chromatic

5.25 in. x .925 in.

20 ft.

BRDSANG ESPRESSO 20

Grooved Deck Board

Earl Grey

Multi-Chromatic

5.25 in. x .925 in.

20 ft.

BRDSANG EARL GREY 20

Grooved Deck Board

Item Number

Latte

Multi-Chromatic

5.25 in. x .925 in.

20 ft.

BRDSANG LATTE 20

Square Edge Deck Board

Espresso

Multi-Chromatic

5.25 in. x .925 in.

16 ft.

BRDSAN ESPRESSO 16

Square Edge Deck Board

Earl Grey

Multi-Chromatic

5.25 in. x .925 in.

16 ft.

BRDSAN EARL GREY 16

Square Edge Deck Board

Latte

Multi-Chromatic

5.25 in. x .925 in.

16 ft.

BRDSAN LATTE 16

Sanctuary Fascia Fascia Profile: Reversible: No Material: Durable polyethylene (PE) outer surface is co-extruded on three sides with a wood and PE composite core Warranty: 25-year Stain and Fade; 25-year Limited Performance Item Description

Color

Color Pattern

Fascia Board

Espresso

Multi-Chromatic

Fascia Board

Earl Grey

Fascia Board

Latte

Dimensions

Length

Pcs / Unit

.75 in. x 11.25 in.

12 ft.

HCFAS ESPRESSO 12

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS EARL GREY 12

Multi-Chromatic

.75 in. x 11.25 in.

12 ft.

HCFAS LATTE 12

For the most up-to-date information, visit fiberondecking.com.

Item Number

For the most up-to-date information, visit fiberondecking.com.

DECK FASTENERS AND ACCESSORIES

Phantom Hidden Fasteners • • • • • •

Smart design enables faster installation Allows one fastener per butt joint Gripper feet bite into joist; spacer tabs create consistent spacing Keyhole design properly orients and seats the screw for optimal installation Corrosion-resistant All packages includes clips, screws, and driver bit Item Description

Color

Coverage

Count

Pkgs / MC Item Number

Phantom GT Line/Butt Fasteners

Black

50 sq. ft.

BKT BRD PHTM GT B90

Phantom GT End Clip Fastener

Black

25 lf.

BKT BRD FIB SRT/STP

Phantom GT Bucket

Black

500 sq. ft.

900

BKT BRD FIBERON C900

Phantom 20 EC

Black

25 lf.

BKT BRD PHTM20EC B90

GT Line Fastener GT Butt Joint Fastener GT End Clip Fastener

20 End Clip Fastener

Ballistic NailScrew Driver • • • • •

Installs up to 50% faster Driver Attachment easily snaps onto the Ballistic NailScrew Driver, allowing screws to be driven into place with the pull of the trigger Fasteners install like nails, but can be removed easily like screws Driver Kit includes swivel hose fitting, belt hook, safety glasses, allen wrench, oil, driver attachment, and balistic nailscrew driver Tub contains 900 fasteners (800 line fasteners, 100 butt joint fasteners), 950 nailscrews, 1 drive attachment, and 2 drive bits Item Description

Color

Coverage

Count

Pkgs / MC

Item Number

Ballistic NailScrew Driver Kit

N/A

BKT BRD FIB GUN

Ballistic NailScrew Driver Attachment

N/A

BKT BRD FIB GUN ATCH

Black

500 sq. ft.

900

BKT BRD FIB GUN C900

Ballistic NailScrew Driver

900 ct. Ballistic NailScrew Tub

900 count Ballistic Screws

For the most up-to-date information, visit fiberondecking.com.

Fiberon Cortex Fastening System The Fiberon Cortex Fastening System is a hidden deck board face-fastening system that blends seamlessly with the color of your deck. Box contents will cover 100 l/f for 12 in. on-center joist installation or 140 l/f for 16 in. on-center joist installation. Each box includes 224 screws, 300 color-match plugs, and two setting tools. Bucket quantities are available for Paramount decking only. Contents will cover 300 sq. ft. of decking. Each bucket contains 1,050 screws, 1,200 color-match plugs, and six setting tools. Material: Powder-coated stainless steel Item Description

Color

Coverage

Pcs/ Pkg

Pkgs / MC

Item Number

2.5 in. Screws

Burnt Umber

100 lin. ft.

224

SCREW FIB SS BRU

2.5 in. Screws

Cinnabar

100 lin. ft.

224

SCREW FIB SS CNB

2.5 in. Screws

Warm Sienna

100 lin. ft.

224

SCREW FIB SS WMS

2.5 in. Screws

Ipe

100 lin. ft.

224

SCREW FIB SS IPE

2.5 in. Screws

Rosewood

100 lin. ft.

224

SCREW FIB SS ROS

2.5 in. Screws

Tudor Brown

100 lin. ft.

224

SCREW FIB SS TUDOR

2.5 in. Screws

Greystone

100 lin. ft.

224

SCREW FIB SS GRYSTN

2.5 in. Screws

Castle Gray

100 lin. ft.

224

SCREW FIB SS CSGRY

2.5 in. Screws

Western Cedar

100 lin. ft.

224

SCREW FIB SS WC

2.5 in. Screws

Gray Birch

100 lin. ft.

224

SCREW FIB SS GB

2.5 in. Screws

Brownstone

100 lin. ft.

224

SCREW FIB SS BROWNST

2.5 in. Screws

Sandstone

100 lin. ft.

224

SCREW FIB SS SANDSTN

2.5 in. Screws

Flagstone

100 lin. ft.

224

SCREW FIB SS FLAGSTN

2.5 in. Screws

Earthstone

100 lin. ft.

224

SCREW FIB SS EARTHST

2.5 in. Screws

Mineral

100 lin. ft.

224

SCREW FIB SS MINERAL

2.5 in. Screws

Fossil

100 lin. ft.

224

SCREW FIB SS FOSSIL

2.5 in. Screws

Brownstone

300 sq. ft.

1050

SCREW FIB SS3 BROWN

2.5 in. Screws

Sandstone

300 sq. ft.

1050

SCREW FIB SS3 SAND

2.5 in. Screws

Flagstone

300 sq. ft..

1050

SCREW FIB SS3 FLAG

2.5 in. Screws

Earthstone

300 sq. ft.

1050

SCREW FIB SS3 EARTH

2.5 in. Screws

Mineral

300 sq. ft.

1050

SCREW FIB SS3 MIN

2.5 in. Screws

Fossil

300 sq. ft.

1050

SCREW FIB SS3 FOS

For the most up-to-date information, visit fiberondecking.com.

RAILING PRODUCTS

Symmetry Composite Railing Bottom Rail Dimensions: 2.56 in. x 2.07 in.

Top Rail Dimensions: 3 in. x 3.06 in.

• • • • •

Satin finish adds elegance; composite construction ensures lasting durability Reinforced top rail provides strong, sturdy feel Longer rail spans (up to 12 ft.) enable better sight lines Hidden hardware keeps the look clean Works with round, aluminum balusters; cable rail; acrylic panels

Material: Premium quality composite with permanent PVC surface. Warranties: 25-year Residential Limited Performance; 5-year Commercial Limited Performance

Symmetry Railing Components Maximum length between post sleeves: 6 ft. Rail = 67 in. 8 ft. Rail = 91 in. 10 ft. Rail = 115 in. 12 ft. Rail = 139 in.

Post Sleeve Cap

Top Rail Bracket

Post Sleeve

Top Rail

Top H-Channel

Square Balusters

Post Sleeve Base Moulding Bottom Rail Bracket

Bottom Rail Crush Blocks

Bottom U-Channel

Note: Rail lengths will vary slightly due to manufacturing processes. Make sure rails are cut to correct length, and with hole pattern centered between posts before securing.

For the most up-to-date information, visit fiberondecking.com.

Symmetry Rail Kits Rail kits include top rail, bottom rail, H-channel, U-channel (if necessary), crush blocks, and hardware. Posts and infills sold separately. Item Description

Bottom U-channel included in 10 ft. and 12 ft. kits only

Color

Rail Height

Length

Unit / Pallet Item Number

Line/Stair Kit

Tranquil White

N/A

6 ft.

RL KIT S 6 LN/ST WH

Line/Stair Kit

Serene Black

N/A

6 ft.

RL KIT S 6 LN/ST BL

Line/Stair Kit

Simply Brown

N/A

6 ft.

RL KIT S 6 LN/ST BR

Line/Stair Kit

Tranquil White

N/A

8 ft.

RL KIT S 8 LN/ST WH

Line/Stair Kit

Serene Black

N/A

8 ft.

RL KIT S 8 LN/ST BL

Line/Stair Kit

Simply Brown

N/A

8 ft.

RL KIT S 8 LN/ST BR

Line/Stair Kit

Tranquil White

N/A

10 ft.

RL KIT S 10 LN/ST WH

Line/Stair Kit

Serene Black

N/A

10 ft.

RL KIT S 10 LN/ST BL

Line/Stair Kit

Simply Brown

N/A

10 ft.

RL KIT S 10 LN/ST BR

Line/Stair Kit

Tranquil White

N/A

12 ft.

RL KIT S 12 LN/ST WH

Line/Stair Kit

Serene Black

N/A

12 ft.

RL KIT S 12 LN/ST BL

Line/Stair Kit

Simply Brown

N/A

12 ft.

RL KIT S 12 LN/ST BR

Symmetry Rail Kits UNROUTED Unrouted rail kits are for use with alternative infill systems, including cable rail or acrylic panels. Unrouted rail kits include unrouted top and bottom rail, H-channel, crush blocks, and hardware. Posts and infills sold separately. Item Description

Color

Rail Height

Length

Unit / Pallet Item Number

Line/Stair Kit

Tranquil White

N/A

8 ft.

RL KIT S 8 L/S UN WH

Line/Stair Kit

Serene Black

N/A

8 ft.

RL KIT S 8 L/S UN BL

Line/Stair Kit

Simply Brown

N/A

8 ft.

RL KIT S 8 L/S UN BR

Symmetry Rail Sections with Beveled Composite Balusters Includes top rail, bottom rail, H-channel, beveled balusters with screws, crush blocks, and line/stair hardware pack. Posts sold separately. Item Description

Color

Rail Height

Length

Unit / Pallet Item Number

Line/Stair Section

Tranquil White

36 in.

6 ft.

SEC S W 6KD 29.5SB

Line/Stair Section

Tranquil White

36 in.

8 ft.

SEC S W 8KD 29.5SB

For the most up-to-date information, visit fiberondecking.com.

Symmetry Railing Infill Options Fiberon railing systems are compatible with different infill options. Consult applicable building codes to ensure that the infill selected will result in a railing that meets height requirements.

Clear Vision System (CVS) CVS includes pre-drilled aluminum channels, panel tracks, and hardware package. The clear vision system is designed to be installed on decks 3 ft. or less from the ground. Item Description

Color

Rail Height

Length

Pcs/Unit

CVS Line Infill Kit

Item Number

White

36 in.

6 ft.

RL12 KIT 6 CVS WHT C

CVS Line Infill Kit

Black

36 in.

6 ft.

RL12 KIT 6 CVS BLK C

28.5 in. x 65 in. Acrylic Panel

Clear

36 in.

6 ft.

ACRYLIC SHEET CLR C

Symmetry Beveled Composite Balusters 1.25 in. x 1.25 in. square solid cellular PVC balusters. Exclusively for Symmetry Railing (all colors). Features a matte finish. Item Description

Color

Rail Height

Length

Pcs/Unit

Item Number

Beveled Baluster

Tranquil White

36 in.

29.5 in.

BALS BV 29.5 KIT WH

Beveled Baluster

Serene Black

36 in.

29.5 in.

BALS BV 29.5 KIT BL

Beveled Baluster

Simply Brown

36 in.

29.5 in.

BALS BV 29.5 KIT BR

Beveled Baluster

Tranquil White

42 in.

35.5 in.

BALS BV 35.5 KIT WH

Beveled Baluster

Serene Black

42 in.

35.5 in.

BALS BV 35.5 KIT BL

Beveled Baluster

Simply Brown

42 in.

35.5 in.

BALS BV 35.5 KIT BR

Symmetry Black Round Aluminum Balusters .75 in. round aluminum balusters work with Symmetry railing. Stair baluster kits include stair top rail adapters. Item Description

Color Rail Height

Length

Pcs/Unit

Item Number

Round Aluminum Balusters

Black

36 in.

29.5 in.

BAL RD 29.5 LKS BL

Round Aluminum Balusters

Black

42 in.

35.5 in.

BAL RD 35.5 LKS BL

Round Aluminum Balusters with Stair Adapters Black

36 in.

30 in.

BAL RD 30 SKS BL

Round Aluminum Balusters with Stair Adapters Black

42 in.

36 in.

BAL RD 36 SKS BL

Symmetry Round Baluster Stair Adapters Round baluster adapters fit all round Symmetry aluminum balusters.

Item Description

Color

Rail Height

Pcs / Pkg

Pkg/MC

Stair Baluster Adapters

Black

Up to 42 in.

For the most up-to-date information, visit fiberondecking.com.

Item Number BAL15 AD STR 20 PK

Symmetry Hidden Hardware Brackets Symmetry hidden hardware works exclusively with Symmetry Railing system. Item Description

Color

Rail Height

Pcs/Pkg

Pkg/MC

Line/Stair Hardware

Black

Up to 42 in.

N/A

Item Number BKT SYM LN/ST HW

Line Brackets

Stair Brackets

Symmetry Caps and Moulding Symmetry 5 in. x 5 in. Post Sleeve Caps Available in all Symmetry Railing colors. Features a matte finish. Fits over 5 in. x 5 in. Symmetry beveled post sleeves. Item Description

Color

Rail Height

Pcs/Pkg

Pkg/MC

Item Number

Pyramid

Tranquil White

N/A

CAP PYRAMID 5 WH

Pyramid

Serene Black

N/A

CAP PYRAMID 5 BL

Pyramid

Simply Brown

N/A

CAP PYRAMID 5 BR

Symmetry 5 in. x 5 in. Post Sleeve Base Moulding Available in all Symmetry Railing colors. Features a matte finish. Fits over 5 in. x 5 in. Symmetry beveled post sleeves. Item Description

Color

Rail Height

Pcs/Pkg

Pkg/MC

Base Moulding

Tranquil White

N/A

POST SL MLDG 5 WH

Base Moulding

Serene Black

N/A

POST SL MLDG 5 BL

Base Moulding

Simply Brown

N/A

POST SL MLDG 5 BR

For the most up-to-date information, visit fiberondecking.com.

Item Number

Symmetry 5 in. x 5 in. Beveled Composite Post Sleeves Available in all Symmetry Railing colors; features a matte finish. Fits over a 4 in. x 4 in. wood post. Item Description

Color

Rail Height

Length

Units/Pallet

Item Number

5 in. x 5 in. Beveled

Tranquil White

up to 36 in.

39 in.

POST SL CMP 5X39 WH

5 in. x 5 in. Beveled

Serene Black

up to 36 in.

39 in.

POST SL CMP 5X39 BL

5 in. x 5 in. Beveled

Simply Brown

up to 36 in.

39 in.

POST SL CMP 5X39 BR

5 in. x 5 in. Beveled

Tranquil White

up to 42 in.

45 in.

POST SL CMP 5X45 WH

5 in. x 5 in. Beveled

Serene Black

up to 42 in.

45 in.

POST SL CMP 5X45 BL

5 in. x 5 in. Beveled

Simply Brown

up to 42 in.

45 in.

POST SL CMP 5X45 BR

5 in. x 5 in. Beveled

Tranquil White

All

108 in.

POST SL CMP 5X108 WH

5 in. x 5 in. Beveled

Serene Black

All

108 in.

POST SL CMP 5X108 BL

5 in. x 5 in. Beveled

Simply Brown

All

108 in.

POST SL CMP 5X108 BR

Post Sleeve Surface Mount Post sleeve surface mount includes the metal mount bracket and 4 in. x 4 in. wood insert. Item Description 4 in. x 4 in. mount

Color

Rail Height

Length

Units / Pallet

Up to 42 in.

48 in.

For the most up-to-date information, visit fiberondecking.com.

Item Number BKT2 SLV MT WD KIT C

For the most up-to-date information, visit fiberondecking.com.

Horizon Composite Railing Bottom Rail Dimensions: 3.5 in. x 1.75 in.

Top Rail Dimensions: 3.75 in. x 2.25 in.

• • • •

Drink-friendly flat top rail is ideal for entertaining Permanent bonded finish protects against moisture, stains, and UV rays Pre-routed dagger system reduces baluster installation time Three infill options: square composite balusters; round metal balusters; ClearVisionSystem panels

Material: Composite core with a durable PVC coating Warranties: 20-year Residential Limited Performance; 5-year Commercial Limited Performance

Horizon Railing Components Maximum length between post sleeves: 6 ft. Rail = 72 in. 8 ft. Rail = 96 in.

Post Sleeve Cap

Post Sleeve

Top Rail Top Rail Bracket

Square Balusters

Post Sleeve Base Moulding Bottom Rail Bracket

Adjustable Crush Block

Bottom Rail

NOTE: Rail lengths will vary slightly due to manufacturing processes. Make sure rails are cut to correct length, and with hole pattern centered between posts before securing.

For the most up-to-date information, visit fiberondecking.com.

Horizon Rail Sections with matching Square Composite Balusters Rail sections include top and bottom rails, hardware, square composite balusters, and baluster inserts. Posts sold separately. Item Description

Color

Rail Height

Length

Units/Pallet

Item Number

Line Section

White

36 in.

6 ft.

SEC15 M W 6KD 29.5CB

Line Section

White

42 in.

6 ft.

SEC15 M W 6KD 35.5CB

Line Section

White

36 in.

8 ft.

SEC15 M W 8KD 29.5CB

Line Section

White

42 in.

8 ft.

SEC15 M W 8KD 35.5CB

Stair Section

White

42 in.

6 ft.

SEC15 MSW 6KD 35.5CB

Stair Section

White

42 in.

8 ft.

SEC15 MSW 8KD 35.5CB

Horizon Rail Sections with Black Round Metal Balusters Rail sections include top and bottom rails, hardware, black round metal balusters, and baluster inserts. Posts sold separately. Item Description

Color

Rail Height

Length

Units/Pallet

Line Section

Item Number

White

36 in.

6 ft.

SEC15 M W 6KD 29.5MB

Line Section

White

42 in.

6 ft.

SEC15 M W 6KD 35.5MB

Line Section

White

36 in.

8 ft.

SEC15 M W 8KD 29.5MB

Line Section

White

42 in.

8 ft.

SEC15 M W 8KD 35.5MB

Stair Section

White

42 in.

6 ft.

SEC15 MSW 6KD 35.5MB

Stair Section

White

42 in.

8 ft.

SEC15 MSW 8KD 35.5MB

Horizon Rail Kits Horizon rail kits include top and bottom rails, bottom rail support channel, line or stair hardware, and square baluster inserts. Posts and infill sold separately. Line kits include adjustable crush blocks. Item Description

Color

Rail Height

Length

Units/Pallet

Line Kit

Bronze

N/A

6 ft.

RL16 KIT M 6 LN BZ

Line Kit

Black

N/A

6 ft.

RL16 KIT M 6 LN BL

Line Kit

Dark Walnut

N/A

6 ft.

RL16 KIT M 6 LN DW

Line Kit

Bronze

N/A

8 ft.

RL16 KIT M 8 LN BZ

Line Kit

Black

N/A

8 ft.

RL16 KIT M 8 LN BL

Line Kit

Dark Walnut

N/A

8 ft.

RL16 KIT M 8 LN DW

Stair Kit

Bronze

N/A

6 ft.

RL16 KIT2 M 6ST BZ

Stair Kit

Black

N/A

6 ft.

RL16 KIT2 M 6ST BL

Stair Kit

Dark Walnut

N/A

6 ft.

RL16 KIT2 M 6ST DW

For the most up-to-date information, visit fiberondecking.com.

Item Number

Railing Infill Options Fiberon railing systems work with different infill options. Consult applicable building codes to ensure that the infill selected will result in a railing that meets height requirements.

Clear Vision System (CVS) The ClearVisionSystem (CVS) includes pre-drilled aluminum channels, panel tracks, and hardware package. This system is designed to be installed on decks 3 ft. or less from the ground. Item Description

Color

Rail Height

Length

Pcs / Unit

CVS Line Infill Kit

Item Number

White

36 in.

6 ft.

RL12 KIT 6 CVS WHT C

CVS Line Infill Kit

Black

36 in.

6 ft.

RL12 KIT 6 CVS BLK C

28.5 in. x 65 in. Acrylic Panel

Clear

36 in.

6 ft.

ACRYLIC SHEET CLR C

Horizon Square Composite Balusters 1.25 in. x 1.25 in. square composite balusters. Designed for Horizon Railing. Baluster inserts sold separately. Item Description

Color

Rail Height

Length

Pcs / Unit

Item Number

Square Baluster

White

36 in.

29.5 in.

BAL SQ 29.5 KIT WH C

Square Baluster

Bronze

36 in.

29.5 in.

BAL SQ 29.5 KIT BZ C

Square Baluster

Black

36 in.

29.5 in.

BAL SQ 29.5 KIT BL C

Square Baluster

Dark Walnut

36 in.

29.5 in.

BAL SQ 29.5 KIT DW C

Square Baluster

White

42 in.

35.5 in.

BAL SQ 35.5 KIT WH C

Square Baluster

Bronze

42 in.

35.5 in.

BAL SQ 35.5 KIT BZ C

Square Baluster

Black

42 in.

35.5 in.

BAL SQ 35.5 KIT BL C

Square Baluster

Dark Walnut

42 in.

35.5 in.

BAL SQ 35.5 KIT BW C

Horizon Round Metal Balusters Black, round metal balusters, .75 in. diameter. Designed for Horizon Railing. Baluster inserts included.

Item Description

Color

Rail Height

Length

Pcs / Unit

Line Inserts

Black

36 in.

29.5 in.

BAL RD 29.5 LKH BL C

Line Inserts

Black

42 in.

35.5 in.

BAL RD 35.5 LKH BL C

Stair Inserts

Black

36 in.

35.5 in.

BAL RD 35.5 SKH BL C

For the most up-to-date information, visit fiberondecking.com.

Item Number

Baluster Inserts and Screws Horizon Square Baluster Inserts Square baluster inserts fit all Horizon square composite balusters.

Line Insert

Item Description

Color

Rail Height

Pcs / Pkg

Pkg / MC

Item Number

Line Baluster Inserts

White

36 in. - 42 in.

BAL14 INS LN 30 PK W

Line Baluster Inserts

Black

36 in. - 42 in.

BAL14 INS LN 30 PK B

Stair Baluster Inserts

White

36 in. - 42 in.

BAL14 INS ST 24 PK W

Stair Baluster Inserts

Black

36 in. - 42 in.

BAL14 INS ST 24 PK B

Horizon Round Metal Baluster Inserts Round metal baluster inserts work with the Horizon railing system and fit .75 in. round metal balusters. Item Description

Stair Insert

Color

Rail Height

Pcs / Pkg

Pkg / MC

Item Number

Line Insert

Black

36 in. - 42 in.

210

BAL INS MTL LINE C

Stair Insert

Black

36 in. - 42 in.

BAL INS MTL STAIR C

Line Insert

Hardware and Brackets Marine grade hardware is available in white only.

Line Hardware

Stair Hardware

Angle Hardware

Item Description

Color

Rail Height

Pcs/Pkg

Pkg / MC

Line

White

36 in. - 42 in.

BKT14 LN HW 4PK WH

Item Number

Line

Bronze

36 in. - 42 in.

BKT14 LN HW 4PK BZ

Line

Black

36 in. - 42 in.

BKT14 LN HW 4PK BL

Line

Dark Walnut

36 in. - 42 in.

BKT14 LN HW 4PK DW

Line Marine Grade

White

36 in. - 42 in.

BKT LINE 4PK W MG C

Stair

White

36 in. - 42 in.

BKT9 STR 4PK W C

Stair

Bronze

36 in. - 42 in.

BKT7 STAIR 4PK BZ C

Stair

Black

36 in. - 42 in.

BKT10 STR 4PK BL C

Stair

Dark Walnut

36 in. - 42 in.

BKT STAIR HW 4PK DWC

Stair Marine Grade

White

36 in. - 42 in.

BKT STAIR 4PK W MG C

Angle

White

36 in. - 42 in.

BKT ANGLE 4PK W C

Angle

Bronze

36 in. - 42 in.

BKT ANGLE 4PK BZ C

Angle

Black

36 in. - 42 in.

BKT ANGLE 4PK BL C

Angle

Dark Walnut

36 in. - 42 in.

BKT ANGLE HW 4PK DWC

White

36 in. - 42 in.

BKT ANGLE 4PK W MG C

Angle Marine Grade

For the most up-to-date information, visit fiberondecking.com.

Adjustable Crush Blocks The Horizon adjustable crush block extends up to 3-1/2 in.

Horizon and Good Life Adjustable Crush Blocks Item Description Color Rail Height

Pcs/Pkg

Pkg/ MC

Item Number

Adjustable Crush Block

White

N/A

CRUSH BLOCK FIB W C

Adjustable Crush Block

Bronze

N/A

CRUSH BLOCK FIB BZ C

Adjustable Crush Block

Black

N/A

CRUSH BLOCK FIB BL C

Adjustable Crush Block

Dark Walnut

N/A

CRUSH BLOCK FIB DW C

Caps and Moulding 4 in. x 4 in. Post Sleeve Caps Fits over 4 in. x 4 in. composite post sleeves. Item Description

Color

Rail Height

Pcs/Pkg

Pkg / MC

Harbour Cap

White

N/A

Item Number CAP HARBOUR 4 W C

Harbour Cap

Bronze

N/A

CAP HARBOUR 4 BZ C

Harbour Cap

Black

N/A

CAP HARBOUR 4 BL C

Harbour Cap

Dark Walnut

N/A

CAP HARBOUR 4 BW C

Pyramid Cap

White

N/A

CAP PYRAMID 4 WH

Color

Rail Height

Pcs/Pkg

Pkg / MC

4 in. x 4 in. Post Sleeve Moulding Fits over 4 in. x 4 in. composite post sleeves. Item Description

Item Number

Post Moulding - 4 in.

White

POST SL MLDG 4 W C

Post Moulding - 4 in.

Bronze

POST SL MLDG 4 BZ C

Post Moulding - 4 in.

Black

POST SL MLDG 4 BL C

Post Moulding - 4 in.

Dark Walnut

POST SL MLDG 4 BW C

For the most up-to-date information, visit fiberondecking.com.

Composite Post Sleeves 4 in. x 4 in. Beaded Composite Post Sleeve Fits over 4 in. x 4 in. wood post. Item Description

Color

Rail Height

Length

Units/Pallet Item Number

4 in. x 4 in. x 39 in. w/ Bead

White

36 in.

39 in.

POST SL CMP2 39BWHC

4 in. x 4 in. x 48 in. w/ Bead

White

36 in. - 42 in.

48 in.

POST SL CMP2 48BWHC

4 in. x 4 in. x 48 in. w/ Bead

Bronze

36 in. - 42 in.

48 in.

POST SL CMP2 48BBZC

4 in. x 4 in. x 48 in. w/ Bead

Black

36 in. - 42 in.

48 in.

POST SL CMP2 48BBLC

4 in. x 4 in. x 48 in. w/ Bead

Dark Walnut

36 in. - 42 in.

48 in.

POST SL CMP2 48BDWC

4 in. x 4 in. x 108 in. w/ Bead

White

All

108 in.

POST SL CMP2 108BWHC

4 in. x 4 in. x 108 in. w/ Bead

Bronze

All

108 in.

POST SL CMP2 108BBZC

4 in. x 4 in. x 108 in. w/ Bead

Black

All

108 in.

POST SL CMP2 108BBLC

4 in. x 4 in. x 108 in. w/ Bead

Dark Walnut

All

108 in.

POST SL CMP2 108BBWC

5.75 in. x 5.75 in. Post Sleeve Kit Post Sleeve Kits include cap and moulding. Item Description

Color

Rail Height

Length

5.75 in. x 5.75 in.

White

36 in. - 42 in.

48 in.

Units/Pallet Item Number 16

POST SL KIT 6X6B W C

Post Sleeve Surface Mount Post Sleeve Surface Mount includes the metal mount bracket and 4 in. x 4 in. wood insert. Item Description 4 in. x 4 in. mount

Color

Rail Height

Length

36 in. - 42 in.

48 in.

Units/Pallet Item Number 24

For the most up-to-date information, visit fiberondecking.com.

BKT2 SLV MT WD KIT C

Good Life Composite Railing Bottom Rail Dimensions: 2 in. x 3.5 in.

Top Rail Dimensions: 2.97 in. x 2.97 in.

• • • •

Low maintenance composite saves time; lower price point saves money Eco-friendly composite core and durable PVC coating ensure lasting performance Classic rail design and color (white) complements almost any home Easy installation makes it DIY-friendly

Material: Premium quality composite with permanent PVC surface. Warranty: 20-year Limited Performance

Good Life Railing Components Maximum length between post sleeves: 6 ft. Rail = 72 in. 8 ft. Rail = 96 in. Post Sleeve Cap

Top Rail Bracket Top Rail

Bracket Flange Square Balusters

Post Sleeve Base Moulding Bottom Rail Bracket

Adjustable Crush Block

Bottom Rail

NOTE: Rail lengths will vary slightly due to manufacturing processes. Make sure rails are cut to correct length, and with hole pattern centered between posts before securing.

For the most up-to-date information, visit fiberondecking.com.

Template

Good Life Railing Sections with matching Square Composite Balusters Rail sections include top and bottom rails, hardware, and square composite balusters. Posts sold separately. Item Description

Color

Rail Height

Length

Units/Pallet

Line Section

White

36 in.

6 ft.

SEC14 GL W 6KD 33.5

Item Number

Line Section

White

42 in.

6 ft.

SEC14 GL W 6KD 38

Line Section

White

36 in.

8 ft.

SEC14 GL W 8KD 33.5

Line Section

White

42 in.

8 ft.

SEC14 GL W 8KD 38

Stair Section

White

36 in.

6 ft.

SEC14 GLS W 6KD 33.5

Stair Section

White

42 in.

6 ft.

SEC14 GLS W 6KD 38

Stair Section

White

36 in.

8 ft.

SEC14 GLS W 8KD 33.5

Stair Section

White

42 in.

8 ft.

SEC14 GLS W 8KD 38

Square Composite Balusters Consult applicable building codes to ensure that the infill selected will result in a railing that meets height requirements. 1.25 in. x 1.25 in. square composite balusters. Designed for Good Life Railing. Item Description

Color

Rail Height

Length

Pcs / Unit

Item Number

Square Baluster

White

36 in.

33.5 in.

BAL14 SQ 33.5 5PK WH

Square Baluster

White

42 in.

38 in.

BAL14 SQ 38 5PK WH

Hardware and Brackets Good Life brackets come in packs of four.

Line Brackets

Item Description

Color

Rail Height

Pcs/Pkg

Pkg / MC

Item Number

Line

White

36 in. - 42 in

BKT GL 4PK WH AC

Stair

White

36 in. - 42 in

BKT GL STR 4PK WH AC

Stair Brackets

Adjustable Crush Block The Good Life adjustable crush block extends up to 3-1/2 in. Item Description

Color

Rail Height

Pcs/Pkg

Pkg/ MC

Adjustable Crush Block

White

36 in. - 42 in.

For the most up-to-date information, visit fiberondecking.com.

Item Number CRUSH BLOCK FIB W C

Caps and Moulding 4 in. x 4 in. Post Sleeve Caps Fits over 4 in. x 4 in. composite post sleeves. Item Description

Color

Rail Height

Pcs/Pkg

Pkg / MC

Item Number

Harbour Cap

White

N/A

CAP HARBOUR 4 W C

Pyramid Cap

White

N/A

CAP PYRAMID 4 WH

Item Description

Color

Rail Height

Pcs/Pkg

Pkg / MC

Post Moulding - 4 in.

White

4 in. x 4 in. Post Sleeve Moulding Fits over 4 in. x 4 in. composite post sleeves.

For the most up-to-date information, visit fiberondecking.com.

Item Number POST SL MLDG 4 W C

Composite Post Sleeves 4 in. x 4 in. Beaded Composite Post Sleeve Fits over 4 in. x 4 in. wood post. Item Description

Color

Rail Height

Length

Units / Pallet

Item Number

4 in. x 4 in. x 39 in. w/ Bead

White

36 in.

39 in.

POST SL CMP2 39BWHC

4 in. x 4 in. x 48 in. w/ Bead

White

36 in. - 42 in.

48 in.

POST SL CMP2 48BWHC

4 in. x 4 in. x 108 in. w/ Bead

White

All

108 in.

POST SL CMP2 108BWHC

5.75 in. x 5.75 in. Post Sleeve Kit Post Sleeve Kits include cap and moulding. Item Description

Color

Rail Height

Length

Units / Pallet

5.75 in. x 5.75 in.

White

36 in. - 42 in.

48 in.

Item Number POST SL KIT 6X6B W C

Post Sleeve Surface Mount Post Sleeve Surface Mount includes the metal mount bracket and 4 in. x 4 in. wood insert. Item Description 4 in. x 4 in. mount

Color

Rail Height

Length

36 in. - 42 in.

48 in.

Units / Pallet Item Number 24

For the most up-to-date information, visit fiberondecking.com.

BKT2 SLV MT WD KIT C

DECK AND RAIL LIGHTING PRODUCTS

Rail Lighting Options • • • •

Made of rust-free aluminum and powder-coated for a long-lasting finish Each light uses low voltage, environmentally-friendly LED technology and consumes only 1/12 as much energy as standard bulbs Available remote-control dimmer enables convenient lighting control Choose from cap and post sleeve lighting styles in four colors

4 in. x 4 in. LED Lit Post Cap LED Lit Post Caps fit 4 in. x 4 in. post sleeves. Complements Horizon railing colors and finish. Item Description

Color

Watts/Volts

Size

Pkg / MC

Flat Top LED Post Cap

White

4 in. x 4 in.

Item Number CAP FLAT LED 4 WHITE

Flat Top LED Post Cap

Bronze*

4 in. x 4 in.

CAP FLAT LED 4 BRONZ

Flat Top LED Post Cap

Black

4 in. x 4 in.

CAP FLAT LED 4 BLACK

Flat Top LED Post Cap

Dark Walnut

4 in. x 4 in.

CAP FLAT LED 4 DW

4 in. x 4in. Unlit Post Cap Use with LED Lit Post Cap when an un-lit cap is desired. Item Description

Color

Watts/Volts

Size

Pkg / MC

Flat Top Post Cap

White

N/A

4 in. x 4 in.

CAP FLAT 4 WHITE

Item Number

Flat Top Post Cap

Bronze*

N/A

4 in. x 4 in.

CAP FLAT 4 BRONZE

Flat Top Post Cap

Black

N/A

4 in. x 4 in.

CAP FLAT 4 BLACK

Flat Top Post Cap

Dark Walnut

N/A

4 in. x 4 in.

CAP FLAT 4 DW

3.5 in. Post Sleeve Eyeball Light Installs on rail post sleeves. Ideal for accent, stair, and deck surface lighting. Item Description

Color

Watts/Volts

Size

Pkg / MC

LED Eyeball Light

White

1W / 12V

3.5 in. Dia

Item Number POST EYEBALL LT WH

LED Eyeball Light

Bronze*

1W / 12V

3.5 in. Dia

POST EYEBALL LT BZ

LED Eyeball Light

Black

1W / 12V

3.5 in. Dia

POST EYEBALL LT BL

LED Eyeball Light

Dark Walnut

1W / 12V

3.5 in. Dia

POST EYEBALL LT DW

*Please note: Bronze Post Cap and Side Post Lights do not match Horizon Railing in Bronze. We recommend viewing Fiberon deck and rail lighting colors with deck, riser and rail product selections to ensure color compatibility.

For the most up-to-date information, visit fiberondecking.com.

Deck Lighting Options • • • •

4.25 in. x 2.625 in. LED Recessed Riser Light 4.25 in. x 2.625 in. LED recessed light that installs on stair risers. Ideal for accent and stair lighting. Item Description

Color

Watts/Volts

Size

Pkg / MC

Item Number

Riser Light

White

1W / 12V

4.25 in. x 2.625 in.

RISER LIGHT WHITE

Riser Light

Bronze*

1W / 12V

4.25 in. x 2.625 in.

RISER LIGHT BRONZE

Riser Light

Black

1W / 12V

4.25 in. x 2.625 in.

RISER LIGHT BLACK

Riser Light

Dark Walnut

1W / 12V

4.25 in. x 2.625 in.

RISER LIGHT DW

LED Recessed Deck Surface Light Kit Kit includes 10 LED recessed lights, transformer/power source, wire connectors, 100 feet of wire, remote driver, and remote control. Recessed lights fit flush with the deck surface. The transformer can power up to 30 recessed lights total. Additional lights are sold separately in packs of two or 10. Item Description

Color

Watts/Volts

Size

Pkg / MC

N/A

1.125 in. Dia

LED Recessed 10-Piece Kit

Transformer

Item Number REC LED KIT WHITE

Remote Dimmer

LED Recessed Deck Surface Light Packs Use to supplement the Recessed Light Kit or as part of a complete lighting installation. Recessed lights fit flush with the deck surface. Color

Watts/Volts

Size

Pkg / MC

LED Recessed 2 Pack

Item Description

N/A

1.125 in. Dia

REC LED 2PK WHITE

Item Number

LED Recessed 10 Pack

N/A

1.125 in. Dia

REC LED 10PK WHITE

2-in-1 Recessed Light Drill Bit Reduce installation time for recessed lights. This single bit enables two different hole size: .75 in. and 1.125 in. Item Description Recessed Light Bit

Color

Watts/Volts

Size

Pkg / MC

Item Number

N/A

.75 in. x 1.125 in.

REC DRILL BIT

For the most up-to-date information, visit fiberondecking.com.

Lighting Accessories Transformers • Fiberon DC Transformer powers up to 30 watts of lighting • Additional transformers are required for larger lighting projects *5amp DC Transformer is available through special order only. Item Description

Color

Watts/Volts Capacity

Pcs / MC

Item Number

DC Transformer

Black

12V DC

120W

REC TRANSFORMER

DC Transformer 5amp*

Black

12V DC

60W

REC TRANSFORMER 60W

Controllers • • • •

A remote dimmer is required unless the transformer is plugged into a switch-operated outlet Dimmer includes key fob remote Remote dimmer and timer must be plugged into a transformer Photoelectric timer’s light-sensing photocell automatically turns light on and off for up to eight hours; features a dusk-to-dawn setting Item Description

Color

Watts/Volts

Timer

Pcs / MC

Item Number

DC Remote Dimmer

Black

12V DC

N/A

REC REMOTE DIMMER

Photoelectric Timer

Black

110V

1-8hrs

REC 110V TIMER

Remote Dimmer

Photoelectric Timer

Wiring • Low voltage wire can be run through railing • Structural posts must be routed to run up under 4 in. x 4 in. post sleeves • Wire nuts are required for lighting installations Item Description

Color

Watts/Volts

Quantity

Pcs / MC

Low Voltage Wire, 18/2 GA

N/A

12V DC

100 ft.

REC 10 18/2GA WIRE

Silicone Filled Wire Nuts

N/A

10 pieces

REC WIRE NUTS 10PK

For the most up-to-date information, visit fiberondecking.com.

Item Number

ADA HANDRAIL SYSTEM

ADA Handrail System Components • • • •

ADA code-compliant hand rail Available in white, black, and brown Works with Symmetry, Horizon, and Good Life Railing Backed by a 20-year limited warranty

ADA Handrail • ADA Handrail is available in 104 in. lengths that can be connected with ADA joiners • Finish with a wall return kit, end loop, or post return • The length of the ADA handrail is supported and attached by ADA mounting brackets (sold separately) Item Description

Color

Pcs / Pkg

Length

Pkg / MC Item Number

Round Handrail with Stiffener

White

104 in.

HR RAIL 104 WH

Round Handrail with Stiffener

Black

104 in.

HR RAIL 104 BL

Round Handrail with Stiffener

Brown

104 in.

HR RAIL 104 BN

90 Degree Corner

White

N/A

HR 90 DEGREE CRNR WH

90 Degree Corner

Black

N/A

HR 90 DEGREE CRNR BL

90 Degree corner

Brown

N/A

HR 90 DEGREE CRNR BN

End Loop

White

18 in. x 12 in. x 18 in.

HR END LOOP WH

End Loop

Black

18 in. x 12 in. x 18 in.

HR END LOOP BL

End Loop

Brown

18 in. x 12 in. x 18 in.

HR END LOOP BN

Post Return

White

16-1/2 in. x 6 in.

HR POST RETURN WH

Post Return

Black

16-1/2 in. x 6 in.

HR POST RETURN BL

Post Return

Brown

16-1/2 in. x 6 in.

HR POST RETURN BN

ADA Rail Joiners • Straight and adjustable joiners connect lengths of ADA handrail • ADA joint rings cover and seal spaces between pieces being joined Item Description

Color

Pcs / Pkg

Length

Pkg / MC Item Number

Adjustable Joiner

Metal

N/A

HR ADJUSTABLE JOINER

Straight Joiner

Metal

6 in.

HR STRAIGHT JOINER

Joint Ring

White

N/A

HR JOINT RING WH

Joint Ring

Black

N/A

HR JOINT RING BL

Joint Ring

Brown

N/A

HR JOINT RING BN

ADA Wall Return Kits • Return kits include return brackets and cover plates • To begin or end an ADA handrail section, ADA return kits can be attached directly to post sleeves

Item Description

Color

Pcs / Pk

Length

Pkg / MC Item Number

Wall Return Kit

White

N/A

HR WALL RETURN WH

Wall Return Kit

Black

N/A

HR WALL RETURN BL

Wall Return Kit

Brown

N/A

HR WALL RETURN BN

Straight Wall Return Kit

White

N/A

HR STRGT WALL RTN WH

Straight Wall Return Kit

Black

N/A

HR STRGT WALL RTN BL

Straight Wall Return Kit

Brown

N/A

HR STRGT WALL RTN BN

For the most up-to-date information, visit fiberondecking.com.

Mounting Brackets • In order to support the length of ADA handrail, install handrail brackets directly on top of rail post or post sleeve • Bracket kits include brackets, screws and screw caps Item Description

Color

Pcs / Pk

Length

Pkg / MC Item Number

Handrail Bracket Kit

White

N/A

HR HAND RAIL BKT WH

Handrail Bracket Kit

Black

N/A

HR HAND RAIL BKT BL

Handrail Bracket Kit

Brown

N/A

HR HAND RAIL BKT BN

90˚ Insert Corner Bracket

White

N/A

HR 90DEG INSD BKT WH

90˚ Insert Corner Bracket

Black

N/A

HR 90DEG INSD BKT BL

90˚ Insert Corner Bracket

Brown

N/A

HR 90DEG INSD BKT BN

Accessories • Rail end caps cover the open ends of the ADA handrail • Wall return cover plates cover the base of the ADA wall and straight wall return brackets • Caps and cover plates are included with the return kits Item Description

Color

Pcs / Pk

Length

Pkg / MC Item Number

Rail End Cap

White

N/A

HR RAIL END CAP WH

Rail End Cap

Black

N/A

HR RAIL END CAP BL

Rail End Cap

Brown

N/A

HR RAIL END CAP BN

Wall Return Cover Plate

White

N/A

HR BKT RTN CV PLT WH

Wall Return Cover Plate

Black

N/A

HR BKT RTN CV PLT BL

Wall Return Cover Plate

Brown

N/A

HR BKT RTN CV PLT BN

For the most up-to-date information, visit fiberondecking.com.

CARE AND MAINTENANCE GUIDE

Fiberon® Care and Maintenance Fiberon Decking Important Considerations

• Ensure a minimum of 1.5 inches (4 cm) required ventilation under deck and required spacing between decking boards. See ventilation requirements below. • Improve drainage or grade soil to eliminate standing water under decks. • Direct downspouts, downspout extensions and splash guards away from decks. • Position dryer vents away from decks. • Maintain a deck that is dry and clean. • Clean your deck as often as needed, at least twice each year. • Use extreme caution with pressure washers and use at pressures less than 3,000 psi at 10 in. above deck surface. Pressure washing is not recommended when mold/mildew are present on the deck. • Keep debris out of gaps between the decking boards so rain showers can remove pollen and organic debris between cleanings. • Minimize the use of wet mulch up against the deck structure. • Items stored directly on top of the deck surface, such as flower pots, prohibit water evaporation and can cause some staining on the deck surface.

Ventilation Make sure there is adequate and unobstructed air flow under 50% of the deck. Allow a minimum of 1.5 inches (4 cm) between bottom of joist and the ground. Water must be able to flow away from under the deck. Improve drainage or grade flat areas where standing water may gather. Do not install decking directly to an existing or solid surface.

Sleeper Installation Minimum joist height is 1.5 inches (4 cm), installed level, in direction of water runoff and directly to a solid sub-structure. Create adequate ventilation for the deck by widening side-to-side spacing between boards to ¼ inch (6 cm) with a maximum of 3/8 inch (9.5 mm) gap. The deck design must allow unrestricted air flow under the deck at the open joist ends for ventilation and drainage.

Mind the Gap If the gap between decking boards is less than 3/16 in., organic debris such as leaves, seeds or pollen can settle on the deck and clog gaps. Water can pool, steeping organic debris that forms a “tea” or of tannin which may stain your deck. This organic debris is a strong food source for mold. Keeping the gap clean is the easiest way to keep the deck clean. If gapping becomes clogged, use a garden hose, a spatula, putty knife or similar tool to remove debris.

Clean Your Deck Clean your deck as often as needed, at least twice each year to remove pollen, organic debris, dirt or stains. Generally, a broom or a blower will work better than a hose for removing scattered organic materials like leaves. For general cleaning, use soap and water or mild household cleaners.

Construction Chalk Colored chalk, used in construction for marking straight lines prior to cutting, is permanent on most surfaces. Contact the manufacturer of the specific brand and color of chalk for a cleaning solution that may prove effective. The best advice is to avoid colored chalk. Use workable alternatives such as white chalk or baby powder.

For the most up-to-date information, visit fiberondecking.com.

Masonry Construction It is important to protect decking during masonry construction. White or hazy residue from mineral deposits (efflorescence) can leach out of stone and masonry materials after water evaporates, leaving the deposits behind. Minerals from soils in certain arid and mountainous environments can also cause a hazing affect when deposited on the deck surface. This can only be prevented with complete and secure coverage of the decking surface area during the construction phase or installation of the decking after the masonry construction phase. To minimize this affect during masonry construction, keep materials dry and allow masonry and cement to cure properly. For mineral deposits left on the decking surface, periodic cleaning is required to maintain visual attractiveness. Fiberon Composite Deck Cleaner is specifically formulated to clean dirt, clay, mud, soil, mineral deposits and masonry and stucco residue. Use the Fiberon Composite Deck Cleaner with a brass bristle brush to clean, repeating the process as needed. Be sure to follow the label instructions. Do not mix recommended cleaning products together as harmful chemical reactions could occur.

Dirt and Grime Dislodge accumulated dirt with a broom or by using soap and water and a non-metal scrub brush. Thoroughly rinse off with a garden hose. Skilled professionals may use a pressure washer with wide fan tips, at low pressures under 3,000 psi and at safe distances, 10 in. above deck. In the wrong hands, your composite deck can be damaged. Exercise extreme caution.

Oil and Grease Stains Speedy clean-up is best. To clean grease and oil stains that soap and water cannot remove, some all-purpose cleaners such as Fantastik will cut through grease and grime. Or use a commercial deck cleaner designed specifically for your type of decking. De-Solv-It Citrus Solution is effective in removing tar, asphalt, oil, grease and chewing gum. Be sure to follow the manufacturer’s recommendations and test in an inconspicuous area prior to cleaning the entire deck

Mold and Mildew Mold and mildew are common environmental conditions. Molds grow on decaying organic material such as wood, leaf decay, and pollen. Tiny and lightweight, mold spores travel easily through the air. Different climates experience varying degrees of these conditions depending on the amount of moisture and heat present. To thrive, mold and mildew need air, water, elevated temperatures and a food source. There is no way to eliminate all these conditions in the environment. A wide variety of building materials including concrete, wood products, vinyl siding and many others are subject to potential mold growth. To minimize mold on your decking, clean your deck as often as needed, at least twice each year. Climate conditions vary in different regions of the country and may necessitate more periodic cleaning. Removal of leaves, debris, and other organic materials that provide a food source for mold development is important. If mold is present on your deck, there are many commercial products available for cleaning mold. We recommend the following commercial cleaners. For best results, be sure to follow the manufacturer’s instructions and use cleaners within their stated shelf life. Do not mix recommended cleaning products together, as harmful chemical reactions could occur. Never mix bleach and acids. Collier Manufacturing 30-Seconds® Outdoor Cleaner and 30-Seconds® Spray & Walk Away are heavy duty, mildly alkaline, chlorinated mold and mildew removers/cleaners that are biodegradable once rinsed into the soil. Both have been tested and perform very well in removing mold and mildew and retarding its return. For more information on cleaning mold and mildew, see Fiberon Technical Bulletin # 13 at this link, fiberondecking.com/ resources/literature.

Salt and Calcium Chloride Buildup of salt and calcium chloride from snow and ice removal is easily removed with enough water and perhaps a light scrub. Use a garden hose or sprayer. If using a pressure washer, use at low pressures under 3,000 psi and at safe distances, 10 in. above deck, to avoid damaging your deck. Never use metal shovels or sharp-edged tools to remove snow and ice from the surface of any Fiberon decking product. For the most up-to-date information, visit fiberondecking.com.

Static Dry or windy environments may create a temporary condition of static electricity, which will vary depending on climate and site conditions. Heat pumps and dryer vents that are close to, or pointed toward the decking material can also generate static electricity on the deck.

Rubber Mats Welcome mats or grill mats with a rubber, vinyl or latex backing can mark your deck. The marks can be removed; however, to avoid them, use only polypropylene or colorfast woven rugs.

Important Ladder Usage Safety Instructions When using a ladder, place the ladder on a piece of ¾ in. plywood firmly secured to the deck surface. This will disperse the load of the ladder’s feet to nearby underlying joists. Drill fasteners downward through the top of the plywood sheet, into the deck board gaps and into the joists to keep the plywood from slipping. This avoids leaving holes in your decking once the plywood sheet is removed. Be sure to follow the ladder manufacturer’s instructions and safety tips.

Fire and Unusual Heat Sources Composite decking will retain heat when exposed to direct or reflective sunlight. Exercise caution if walking barefoot as footwear may be required. Fire and unusual sources of heat and heat build-up can possibly damage Fiberon decking surfaces. Examples would include fire, reflected light from different types of glass (ex. low-e glass), fire features, and under-deck waterproofing installations that do not provide the six inches (15 cm) of unobstructed net free ventilation. • Low-E Glass/Reflected Heat Low-emissivity (Low-E) glass is designed to prevent heat gain inside the house by reflecting sunlight outward. This reflective property can result in excessive heat build on the surface of Fiberon decking. The properties that Low-E glass employs to prevent passive heat gain within a structure can result in unusual heat build-up on exterior surfaces. When sunlight is reflected and concentrated, it can harm a range of building materials, including doors, windows, siding, trim and decking. Damage caused to these products can include melting, sagging, warping, discoloration, increased expansion and contraction, and accelerated weathering. If you have questions on how to reduce this risk, contact the manufacturer of the product which contains the Low-E glass for suggestions on how to reduce or eliminate the reflected heat. • Under-deck Waterproofing Systems Under-deck waterproofing systems, properly installed, can provide additional living or storage space. Improper installations are those that restrict air flow and result in build-up of heat and/or humidity which can result in unwanted consequences. Contact the manufacturer of the specific under-deck waterproofing system for installation instructions to ensure the required six inches (15 cm) of unobstructed ventilation is achieved for Fiberon decking. If already installed, seek methods to achieve the ventilation requirement. • Fire Features/Fire Pits Fire features and fire pits are increasingly popular in outdoor living environments. Fire can damage many building products, including Fiberon decking. Improperly installed fire features and fire pits can cause damage to the surface of Fiberon decking via direct exposure to the flame or excessive radiated heat. Proper caution should be taken when designing, installing and using these features to ensure damage does not result.

Fiberon Paramount Decking Recommended cleaners include Simple Green and Krud Kutter Cleaner Degreaser. Follow the manufacturer’s instructions and test in an inconspicuous area to make sure cleaner does not harm the decking surface. Avoid the use of rubber or vinyl products on Paramount Decking, as a reaction could occur resulting in discoloration under the rubber or vinyl product. Certain chemical ingredients in products such as insect repellent and sunblock could cause a reaction and result in a stain on the decking surface.

FIB-0207-LIT REV H 915

For the most up-to-date information, visit fiberondecking.com.

WARRANTY I N F O R M AT I O N

Residential Limited Warranty PLEASE READ THIS WARRANTY CAREFULLY BEFORE PURCHASING, USING OR INSTALLING YOUR FIBERON® PRODUCT. THIS WARRANTY IS A BASIS OF THE BARGAIN AND PURCHASE OF THE FIBERON PRODUCT AND SETS FORTH THE ENTIRE WARRANTY AND RESPONSIBILITY OF FIBERON. PURCHASE AND USE OF THE FIBERON PRODUCT CONSTITUTES ACCEPTANCE OF AND AGREEMENT TO THESE TERMS. SECTION 5 CONTAINS A BINDING ARBITRATION CLAUSE AND CLASS ACTION WAIVER THAT AFFECTS YOUR RIGHTS ABOUT HOW TO RESOLVE ANY DISPUTE WITH FIBERON.

Limited Warranty Fiber Composites LLC, individually and doing business as Fiberon (“Fiberon”) warrants to the original purchaser (“Purchaser”, “you” or “your”) that for the Warranty Period set forth below the following products (“Fiberon Product”) shall, under normal and proper service conditions, remain free from material manufacturing defects and will not check, splinter, delaminate, rot, or suffer structural damage from fungal decay, when installed, used and maintained in an above-ground application and in accordance with Fiberon’s written instructions. For purposes of this Limited Warranty, (a) the “original purchaser” means the individual or individuals who were the owners of the structure when the deck constructed of the subject Fiberon Products was installed, and (b) a “residential application” is an installation of the Fiberon Product on an owner-occupied residence

Lifetime Limited Warranty The term of this Limited Warranty (“Warranty Period”) for the Fiberon Product listed below shall be in effect from the date of original purchase by or for a residential application as long as the Purchaser owns the property upon which the Fiberon Product was installed. Decking: Fiberon® Paramount™ PVC Decking

25-year Limited Warranty The term of this Limited Warranty (“Warranty Period”) for the Fiberon Product listed below shall be twenty-five (25) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed. Decking: Railing:

Fiberon Horizon® Decking, Fiberon Horizon Symmetry™ Collection Decking, Fiberon ProTect Advantage® Decking, Fiberon ProTect® Decking, Fiberon Sanctuary® Decking, Fiberon Good Life™ Decking Fiberon® Symmetry Railing

20-year Limited Warranty The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be twenty (20) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed. Fiberon Professional Decking, Fiberon Xtreme Decking, Fiberon Xtreme Wide Decking, Terranova® Xtreme, Fiberon ArmorGuard® Decking and Veranda® ArmorGuard Decking Railing: Fiberon Horizon Railing, Fiberon Good Life Railing, Fiberon Natural Railing, Fiberon HomeSelect® Railing, Veranda ArmorGuard Railing, Veranda Regency Railing and Veranda Enclave® Railing Fasteners: Fiberon and Phantom® branded Hidden Fasteners (“Fiberon Fastener”) as listed on www.fiberondecking.com Decking:

For the most up-to-date information, visit fiberondecking.com.

15-year Limited Warranty The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be fifteen (15) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed. Decking: Fiberon Traditional Decking, Fiberon Exotics Decking, Terranova Decking and Veranda Composite Decking Fencing: Fiberon Fencing Pickets and Cross Rails, Veranda Composite Fencing Pickets and Cross Rails, Fiberon Wood Shades® Fencing Pickets and Cross Rails Note: Substitution of wood or other materials for any portion of the Fencing system will void this warranty. This warranty is only valid if the entire Fiberon manufactured system is used: Posts, Pickets and Backer Rails.

10-year Limited Warranty The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be ten (10) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed. Fencing:

Fiberon Wood Shades Fencing Posts, Fiberon Fencing Posts, Veranda Composite Fencing Posts Note: Substitution of wood or other materials for any portion of the Fencing system will void this warranty. This warranty is only valid if the entire Fiberon manufactured system is used: Posts, Pickets and Backer Rails.

Obtaining Instructions Fiberon written instructions are available from your Fiberon dealer or your contractor or from Fiberon at fiberondecking. com or by writing to Fiberon at the address stated below.

Warranty Period Replacement In the event of a failure of the Fiberon Product or Fiberon Fastener within the applicable Warranty Period as warranted above, when properly installed, used and maintained as described above, Fiberon will replace the nonconforming item as set forth in Section 2 below.

Terms and Conditions The limited warranty set forth in this Limited Warranty is the only warranty (whether written or oral, express or implied) Fiberon makes for your Fiberon Product or Fiberon Fasteners; it is subject to all terms and conditions stated herein and no one (including but not limited to a Fiberon dealer, installer, reseller, agent or employee) is authorized to modify, expand or add to this limited warranty. Fiberon makes no other representation, guarantee or warranty. No one is authorized to make any representation, guarantee or warranty on Fiberon’s behalf, and Fiberon shall not be bound by or liable for, any representation, guarantee, warranty, or condition with regard to any Fiberon Product or Fiberon Fastener other than as expressly stated in this Limited Warranty. THIS LIMITED WARRANTY COMPRISES FIBERON’S SOLE AND ENTIRE WARRANTY AND OBLIGATION IN CONNECTION WITH FIBERON PRODUCTS OR FIBERON FASTENERS. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, CONDITION, SUITABILITY, OR PERFORMANCE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED. ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NOT EFFECTIVELY DISCLAIMED ARE LIMITED TO THE APPLICABLE STATUTE OF LIMITATIONS BUT IN NO EVENT WILL EXTEND BEYOND THE APPLICABLE WARRANTY PERIOD. FIBERON EXCLUDES AND WILL NOT PAY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT, REGARDLESS OF THE BASIS OF ANY CLAIM OR LIABILITY, SHALL FIBERON BE LIABLE FOR ANY DAMAGES, OF ANY NATURE OR DESCRIPTION WHATSOEVER, EXCEEDING THE ACTUAL PURCHASE PRICE, AND ANY LIABILITY SHALL BE LIMITED TO, THE ACTUAL PURCHASE PRICE OF THE DEFECTIVE PRODUCT AS ADJUSTED ON THE BASIS OF THE PRORATED WARRANTY SCHEDULE PROVIDED HEREIN.

For the most up-to-date information, visit fiberondecking.com.

Warranty Claim Procedure 1. Make a Claim To make a warranty claim, the Purchaser must send a copy of this warranty document, copy of original proof of purchase, and photos of the defective or nonconforming Fiberon Product or Fiberon Fasteners, to the address below. Such proof of purchase must be from an authorized Fiberon Product dealer and must show (1) the date of the purchase and (2) that sufficient Fiberon Product has been purchased to cover the number of lineal feet claimed to be damaged. All warranty claims must be received by Fiberon within the Warranty Period and in no event later than thirty (30) days after any discovery of a possible nonconforming nature of or other failure of the Fiberon Product or Fiberon Fastener.

2. Submit a Claim Claims and Notices must be sent to: Fiberon Consumer and Technical Support Department 181 Random Dr., New London, NC 28127 Phone 844-226-3958 | Fax 704-463-1750 | email info@fiberondecking.com

3. Temporary Repairs and Determination Upon discovering a possible defect of the Fiberon Product or Fiberon Fastener, Purchaser must make temporary repairs or cordon off the area at the Purchaser’s expense to protect all property and persons that could be affected. If needed, the Purchaser must allow Fiberon to enter the property into which the Fiberon Product or Fiberon Fastener is installed to inspect the nonconforming product. Fiberon must have made a determination on the warranty claim before any permanent repairs or removal of materials may be undertaken. No products shall be returned to Fiberon unless directed and authorized by Fiberon in writing to do so. Any removal or disposal of defective products shall be at Purchaser’s expense.

General Conditions, Exclusions and Limitations Purchaser’s Sole Remedy Purchaser’s sole remedy, and Fiberon’s sole liability, for any claim whatsoever relating to the Fiberon Product or Fiberon Fastener, including without limitation any claims arising out of the marketing, purchase, installation, use, storage, possession or maintenance of Fiberon Products (whether such claim arises in contract, warranty, tort, gross negligence, negligence, strict liability, statutes or regulations, or otherwise) or any claims that the Fiberon Products or Fiberon Fasteners failed to perform as warranted above, is and shall be the replacement of the defective Fiberon Product or Fiberon Fastener with new Fiberon Product or Fiberon Fastener, as the case may be, in an amount equal to the volume (linear feet) of defective material as listed on the Prorated Warranty Schedule contained herein or the number of defective Fiberon Fasteners. Replacement Fiberon material will be as close in color, design and quality to the original installation as reasonably possible, in Fiberon’s discretion and determination, but Fiberon does not guarantee an exact match as colors and designs may change. Additionally, Purchaser agrees to the use of such fasteners as adequate for reinstallation of the furnished board, irrespective of existing method. Fiberon may, at its option, elect to refund the percentage of the original purchase price listed under Recovery on the Prorated Warranty Schedule in lieu of replacing the defective product.

For the most up-to-date information, visit fiberondecking.com.

In addition, this Limited Warranty does not cover and Fiberon shall not be liable for any installation, removal or reinstallation costs. Fiberon does not warrant against and is not responsible for, and no express or implied warranty shall be deemed to cover, any condition attributable to: (1) improper installation of Fiberon products and/or failure to abide by Fiberon’s written instructions and any applicable laws or building codes, including but not limited to improper structural support, fastening, ventilation or gapping; (2) use of Fiberon Products beyond normal use or in an application not recommended or permitted by Fiberon’s written instructions and applicable laws and building codes; (3) movement, distortion, collapse or settling of the ground or the supporting structure on which Fiberon Products are installed; (4) Defects in or failure arising from decking structure resulting from water caused by improper installation, workmanship, maintenance or repair; (5) any Act of God (including but not limited to flooding, hurricane, tornado, wind, earthquake, lightning, hail, etc.); (6) discoloration, fading, spotting or staining from or caused, in whole or in part, by mold, mildew, other fungal growth, organic materials, metallic oxides or particles (including but not limited to rust or corrosion of any fasteners), dirt, other atmospheric or environmental pollutants, foreign substances such as grease or oil, chemicals (including but not limited to those found in cleaners), or normal weathering (defined as natural efflorescence, exposure to sunlight, weather and atmospheric conditions which causes any colored surface to gradually fade, flake, chalk, or accumulate dirt or stains); (7) damage resulting from casualty, fire or exposure to heat sources such as cooking devices or retro-reflective surfaces; (8) the application of paints, stains, surface treatments or other chemical substances including but not limited to cleaners or pesticides; (9) fading, flaking or other deterioration of any paints, stains or other coatings placed on the Fiberon Products; (10) climate change, environmental conditions, static electricity or any cause beyond the control of Fiberon; (11) variations or changes in color of Fiberon Products; (12) improper handling, maintenance, storage, abuse or neglect of Fiberon Products by Purchaser or others; (13) ordinary wear and tear; (14) impact from objects; or (15) any fasteners not supplied or approved by Fiberon. No warranty is given with respect to any fasteners other than the Fiberon Fasteners. Other fasteners, whether approved fasteners or otherwise, are subject to only the warranties provided by the manufacturer of the fastener and Purchaser’s sole warranty and remedy is with that manufacturer.

Additional Terms and Limitations The suitability of the Fiberon Products for Purchaser’s property for the installation and use of the Fiberon Products, including but not limited to whether the Fiberon Product meets the requirements of any applicable building or safety code or similar regulation relating to Purchaser’s property, is the responsibility of the Purchaser and/or its design professionals, and not that of Fiberon. Fiberon does not provide architectural or engineering services. Fiberon makes no express or implied warranty or representation as to the suitability of the Fiberon Products for, or actual performance, capabilities or operation of the Fiberon Products at, Purchaser’s property or under the conditions of Purchaser’s use. Without limitation on any other provision of this Limited Warranty, all warranties, whether express or implied, and including this Limited Warranty, are void if any one or more of the following applies or occurs: (i) the Fiberon Product or Fiberon Fastener is not installed, maintained and/or used strictly in accordance with Fiberon’s written instructions, and all applicable laws, codes and regulations; (ii) misuse of the product, whether foreseeable or unforeseeable; (iii) failure of proper and timely maintenance or repair; (iv) failure to provide timely notice to Fiberon of any failure or defect of the Fiberon Product or Fiberon Fastener; or (v) use of fasteners other than the Fiberon branded fasteners or approved hidden fasteners listed on fiberondecking.com to the extent that the Fiberon Product failures resulted from the use of non-approved fasteners.

Prorated Limited Warranty Schedule Recovery 100% 80% 60% 40% 20% 10%

10-Year Residential

15-Year Residential

20-Year Residential

25-Year Residential

Year of Claim

0 - 5 years 6 years 7 years 8 years 9 years 10 years

0 - 7 years 8 - 9 years 10 - 11 years 12 - 13 years 14 years 15 years

0 - 10 years 11 - 12 years 13 - 14 years 15 - 16 years 17 - 18 years 19 - 20 years

0 - 10 years 11 - 13 years 14 - 16 years 17 - 19 years 20 - 22 years 23 - 25 years

For the most up-to-date information, visit fiberondecking.com.

Binding Arbitration and Class Action Waiver if You Live in the United States This section applies to any dispute between you and Fiberon relating to your Fiberon Product. "Dispute" will be given the broadest possible meaning allowable under law.

1. Notice of Dispute In the event of a dispute, you must give Fiberon a Notice of Dispute, which is a written statement that sets forth the name, address and contact information of the party giving it, the facts giving rise to the dispute, and the relief requested. You must send any Notice of Dispute by U.S. Mail to Fiberon, Consumer and Technical Support Department, 181 Random Dr. New London, NC 28127. You will attempt to resolve any dispute with Fiberon through informal negotiation within 60 days from the date the Notice of Dispute is sent. After 60 days, you may commence arbitration.

2. Small Claims Court You may also litigate any dispute in small claims court in your county of residence, if the dispute meets all requirements to be heard in the small claims court. You may litigate in small claims court whether or not you negotiated informally first.

3. Binding Arbitration BINDING ARBITRATION. IF YOU AND FIBERON DO NOT RESOLVE ANY DISPUTE BY INFORMAL NEGOTIATION OR IN SMALL CLAIMS COURT, ANY EFFORT TO RESOLVE THE DISPUTE WILL BE CONDUCTED EXCLUSIVELY BY BINDING ARBITRATION. YOU ARE GIVING UP THE RIGHT TO LITIGATE (OR PARTICIPATE IN AS A PARTY OR CLASS MEMBER) ALL DISPUTES IN COURT BEFORE A JUDGE OR JURY. Instead, all disputes will be resolved before a neutral arbitrator, whose decision will be final except for a limited right of appeal under the Federal Arbitration Act. Any court with jurisdiction over the parties may enforce the arbitrator's award.

4. Class Action Waiver Any proceedings to resolve or litigate any dispute in any forum will be conducted solely on an individual basis. Neither you nor Fiberon will seek to have any dispute heard as a class action, private attorney general action, or in any other proceeding in which either party acts or proposes to act in a representative capacity. No arbitration or proceeding will be combined with another without the prior written consent of all parties to all affected arbitrations or proceedings.

5. Arbitration Procedure, Costs, Fees and Incentives Any arbitration will be conducted by the American Arbitration Association (the "AAA") under its Commercial Arbitration Rules and in many cases itâ&#x20AC;&#x2122;s Supplementary Procedures for Consumer-Related Disputes. For more information, see www. adr.org or call 1-800-778-7879. In any dispute seeking less than $10,000 in damages, Fiberon will promptly reimburse your filing fees and pay the AAA's and arbitrator's fees if you are the prevailing party. You agree to commence arbitration only in your county of residence or New London, NC, USA.

Choice of Law North Carolina law shall govern the interpretation of this Limited Warranty and any claim that Fiberon has breached it, regardless of conflict of law principles. Please register your warranty at this link. Fiberon strongly suggests our customers register your warranty for quicker technical support and warranty service. Fiberon product registration is voluntary. Failure to register will not diminish your limited warranty rights. Fiberon Respects Your Privacy. Fiberon does not trade customer information. Just as important, you control how Fiberon contacts you. We will collect your preferences at the end of warranty registration and we encourage you to view our complete online privacy policy. FIB-0291-LIT Rev D 0216

For the most up-to-date information, visit fiberondecking.com.

Commercial Limited Warranty PLEASE READ THIS WARRANTY CAREFULLY BEFORE PURCHASING, USING OR INSTALLING YOUR FIBERON PRODUCT. THIS WARRANTY IS A BASIS OF THE BARGAIN AND PURCHASE OF THE FIBERON PRODUCT AND SETS FORTH THE ENTIRE WARRANTY AND RESPONSIBILITY OF FIBERON. PURCHASE AND USE OF THE FIBERON PRODUCT CONSTITUTES ACCEPTANCE OF AND AGREEMENT TO THESE TERMS. SECTION 5 CONTAINS A BINDING ARBITRATION CLAUSE AND CLASS ACTION WAIVER THAT AFFECTS YOUR RIGHTS ABOUT HOW TO RESOLVE ANY DISPUTE WITH FIBERON.

Warranty Fiber Composites LLC, individually and doing business as Fiberon (“Fiberon”) warrants to the original purchaser (“Purchaser”, “you” or “your”) that for the Warranty Period set forth below the following Products (“Fiberon Product”) shall, under normal and proper service conditions, remain free from material manufacturing defects and will not check, splinter, delaminate, rot, or suffer structural damage from fungal decay, when installed, used and maintained in an above-ground application and in accordance with Fiberon’s written instructions. For purposes of this Limited Warranty, (a) the “original purchaser” means the individual or individuals who were the owners of the structure when the deck constructed of the subject Fiberon Products was installed, and (b) a “commercial application” is an installation of the Fiberon Product on a commercial building.

10-year Limited Warranty The term of this Limited Warranty (“Warranty Period”) for the Fiberon Product listed below shall be ten (10) years from the date of original purchase by or for a commercial application for a commercial purchaser as long as the Purchaser owns the property upon which the Fiberon Product was installed. Decking:

Fiberon® Paramount® Decking, Fiberon Horizon® Decking, Fiberon Horizon Symmetry™ Collection Decking, Fiberon Pro-Tect® Decking, Fiberon ProTect Advantage® Decking, Fiberon Sanctuary® Decking, Fiberon Good Life™ Decking, Fiberon Xtreme Decking, Terranova® Xtreme Decking, Fiberon Xtreme Wide Decking, Fiberon Exotics Decking, Fiberon Traditional Decking, Fiberon ArmorGuard Decking, Terranova® Decking

5-year Limited Warranty The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be five (5) years from the date of original purchase by or for a commercial application for a commercial purchaser as long as the Purchaser owns the property upon which the Fiberon Product was installed. Decking: Fiberon Professional Decking Railing: Fiberon Symmetry Railing, Fiberon Horizon Railing, Fiberon Good Life Railing Fasteners: Fiberon and Phantom® branded Hidden Fasteners as listed on www.fiberondecking.com

For the most up-to-date information, visit fiberondecking.com.

Terms and Conditions The limited warranty set forth in this Limited Warranty is the only warranty (whether written or oral, express or implied) Fiberon makes for your Fiberon Product or Fiberon Fasteners; it is subject to all terms and conditions stated herein and no one (including but not limited to a Fiberon dealer, installer, reseller, agent or employee) is authorized to modify, expand or add to this limited warranty. Fiberon makes no other representation, guarantee or warranty. No one is authorized to make any representation, guarantee or warranty on Fiberon’s behalf, and Fiberon shall not be bound by or liable for, any representation, guarantee, warranty, or condition with regard to any Fiberon Product or Fiberon Fastener other than as expressly stated in this Limited Warranty. THIS LIMITED WARRANTY COMPRISES FIBERON’S SOLE AND ENTIRE WARRANTY AND OBLIGATION IN CONNECTION WITH FIBERON PRODUCTS OR FIBERON FASTENERS. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, CONDITION, SUITABILITY, OR PERFORMANCE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED. ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NOTEFFECTIVELY DISCLAIMED; ARE LIMITED TO THE APPLICABLE STATUTE OF LIMITATIONS, BUT IN NO EVENT WILL EXTEND BEYOND THE APPLICABLE WARRANTY PERIOD. FIBERON EXCLUDES AND WILL NOT PAY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT, REGARDLESS OF THE BASIS OF ANY CLAIM OR LIABILITY, SHALL FIBERON BE LIABLE FOR ANY DAMAGES, OF ANY NATURE OR DESCRIPTION WHATSOEVER, EXCEEDING, AND ANY LIABILITY SHALL BE LIMITED TO, THE ACTUAL PURCHASE PRICE OF THE DEFECTIVE PRODUCT AS ADJUSTED ON THE BASIS OF THE PRORATED WARRANTY SCHEDULE PROVIDED HEREIN..

Warranty Claim Procedure 1. Make a Claim To make a warranty claim, the Purchaser must send a copy of this warranty document, copy of original proof of purchase, and photos of the defective or nonconforming Fiberon Product or Fiberon Fasteners to the address below. Such proof of purchase must be from an authorized Fiberon Product dealer and must show (1) the date of the purchase and (2) that sufficient Fiberon Product has been purchased to cover the number of lineal feet claimed to be damaged. All warranty claims must be received by Fiberon within the Warranty Period and in no event later than thirty (30) days after any discovery of a possible nonconforming nature of or other failure of the Fiberon Product or Fiberon Fastener.

2. Submit a Claim Send Claims and Notices to: Fiberon Consumer and Technical Support Department 181 Random Dr. New London, NC 28127 Phone 844-226-3958 | Fax 704-463-1750 | email info@fiberondecking.com

3. Temporary Repairs and Determination Upon discovering a possible defect of the Fiberon Product or Fiberon Fastener, Purchaser must make temporary repairs or cordon off the area at the Purchaser’s expense to protect all property and persons that could be affected. If needed, the Purchaser must allow Fiberon to enter the property into which the Fiberon Product or Fiberon Fastener is installed to inspect the nonconforming Product. Fiberon must have made a determination on the warranty claim before any permanent repairs or removal of materials may be undertaken. No Products shall be returned to Fiberon unless directed and authorized by Fiberon in writing to do so. Any removal or disposal of defective Products shall be at Purchaser’s expense.

For the most up-to-date information, visit fiberondecking.com.

General Conditions, Exclusions and Limitations Purchaser’s Sole Remedy Purchaser’s sole remedy, and Fiberon’s sole liability, for any claim whatsoever relating to the Fiberon Product or Fiberon Fastener, including without limitation, any claims arising out of the marketing, purchase, installation, use, storage, possession or maintenance of Fiberon Products (whether such claim arises in contract, warranty, tort, gross negligence, negligence, strict liability, statutes or regulations, or otherwise) or any claims that the Fiberon Products or Fiberon Fasteners failed to perform as warranted above, is and shall be the replacement of the defective Fiberon Product or Fiberon Fastener with new Fiberon Product or Fiberon Fastener, as the case may be, in an amount equal to the volume (linear feet) of defective material as listed on the Prorated Warranty Schedule contained herein or the number of defective Fiberon Fasteners. Replacement Fiberon material will be as close in color, design and quality to the original installation as reasonably possible, in Fiberon’s discretion and determination, but Fiberon does not guarantee an exact match as colors and designs may change. Additionally, Purchaser agrees to the use of such fasteners as adequate for reinstallation of the furnished board, irrespective of existing method. Fiberon may, at its option, elect to refund the percentage of the original purchase price listed under Recovery on the Prorated Warranty Schedule in lieu of replacing the defective Product.

Exclusions and Limitations of Certain Damages In no event will Fiberon be liable for any direct, indirect, incidental, special, consequential, punitive, exemplary, statutory, special, or other, damages based upon the Fiberon Products or Fiberon Fasteners or resulting, directly or indirectly, from any defect in the Fiberon Products or Fiberon Fasteners, including but not limited to damage to, diminution in value of and/or loss of use or enjoyment of, any property or part thereof, whether based on contract, tort, strict liability, statute, regulation or otherwise, even if Fiberon is expressly advised about the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages in certain circumstances, so the above limitation may not apply to you. In addition, this Limited Warranty does not cover and Fiberon shall not be liable for any installation, removal or reinstallation costs. Fiberon does not warrant against and is not responsible for, and no express or implied warranty shall be deemed to cover, any condition attributable to: (1) improper installation of Fiberon products and/or failure to abide by Fiberon’s written instructions and any applicable laws or building codes, including but not limited to improper structural support, fastening, ventilation or gapping; (2) use of Fiberon Products beyond normal use or in an application not recommended or permitted by Fiberon’s written instructions and applicable laws and building codes; (3) movement, distortion, collapse or settling of the ground or the supporting structure on which Fiberon Products are installed; (4) Defects in or failure arising from decking structure resulting from water caused by improper installation, workmanship, maintenance or repair; (5) any Act of God (including but not limited to flooding, hurricane, tornado, wind, earthquake, lightning, hail, etc.); (6) discoloration, fading, spotting or staining from or caused, in whole or in part, by mold, mildew, other fungal growth, organic materials, metallic oxides or particles (including but not limited to rust or corrosion of any fasteners), dirt, other atmospheric or environmental pollutants, foreign substances such as grease or oil, chemicals (including but not limited to those found in cleaners), or normal weathering (defined as natural efflorescence, exposure to sunlight, weather and atmospheric conditions which causes any colored surface to gradually fade, flake, chalk, or accumulate dirt or stains); (7) damage resulting from casualty, fire or exposure to heat sources such as cooking devices or retro-reflective surfaces; (8) the application of paints, stains, surface treatments or other chemical substances including but not limited to cleaners or pesticides; (9) fading, flaking or other deterioration of any paints, stains or other coatings placed on the Fiberon Products; (10) climate change, environmental conditions, static electricity or any cause beyond the control of Fiberon; (11) variations or changes in color of Fiberon Products; (12) improper handling, maintenance, storage, abuse or neglect of Fiberon Products by Purchaser or others; (13) ordinary wear and tear; (14) impact from objects; or (15) any fasteners not supplied or approved by Fiberon. No warranty is given with respect to any fasteners other than the Fiberon Fasteners. Other fasteners, whether approved fasteners or otherwise, are subject to only the warranties provided by the manufacturer of the fastener and Purchaser’s sole warranty and remedy is with that manufacturer.

For the most up-to-date information, visit fiberondecking.com.

Binding Arbitration and Class Action Waiver if You Live in the United States This section applies to any dispute between you and Fiberon relating to your Fiberon Product. “Dispute” will be given the broadest possible meaning allowable under law.

3. Binding Arbitration IF YOU AND FIBERON DO NOT RESOLVE ANY DISPUTE BY INFORMAL NEGOTIATION OR IN SMALL CLAIMS COURT, ANY EFFORT TO RESOLVE THE DISPUTE WILL BE CONDUCTED EXCLUSIVELY BY BINDING ARBITRATION. YOU ARE GIVING UP THE RIGHT TO LITIGATE (OR PARTICIPATE IN AS A PARTY OR CLASS MEMBER) ALL DISPUTES IN COURT BEFORE A JUDGE OR JURY. Instead, all disputes will be resolved before a neutral arbitrator, whose decision will be final except for a limited right of appeal under the Federal Arbitration Act. Any court with jurisdiction over the parties may enforce the arbitrator's award.

For the most up-to-date information, visit fiberondecking.com.

Arbitration Procedure, Costs, Fees and Incentives Any arbitration will be conducted by the American Arbitration Association (the "AAA") under its Commercial Arbitration Rules and in many cases itâ&#x20AC;&#x2122;s Supplementary Procedures for Consumer-Related Disputes. For more information, see www. adr.org or call 1-800-778-7879. In any dispute seeking less than $10,000 in damages, Fiberon will promptly reimburse your filing fees and pay the AAA's and arbitrator's fees if you are the prevailing party. You agree to commence arbitration only in your county of residence or New London, NC.

Prorated Limited Warranty Schedule 10-Year Residential

5-Year Residential

Year of Claim

0 - 5 years 6 years 7 years 8 years 9 years 10 years

1 year 2 years 3 years 4 years 5 years -

Recovery

100% 80% 60% 40% 20% 10%

For the most up-to-date information, visit fiberondecking.com.

Stain and Fade Performance Limited Warranty PLEASE READ THIS WARRANTY CAREFULLY BEFORE PURCHASING, USING OR INSTALLING YOUR FIBERON PRODUCT. THIS WARRANTY IS A BASIS OF THE BARGAIN AND PURCHASE OF THE FIBERON PRODUCT AND SETS FORTH THE ENTIRE WARRANTY AND RESPONSIBILITY OF FIBERON. PURCHASE AND USE OF THE FIBERON PRODUCT CONSTITUTES ACCEPTANCE OF AND AGREEMENT TO THESE TERMS. SECTION 5 CONTAINS A BINDING ARBITRATION CLAUSE AND CLASS ACTION WAIVER THAT AFFECTS YOUR RIGHTS ABOUT HOW TO RESOLVE ANY DISPUTE WITH FIBERON.

Warranty Coverage Fiber Composites LLC, individually and doing business as Fiberon (“Fiberon”), warrants the stain and fade resistance of the following products manufactured by Fiberon (“Fiberon Product”), to the original purchaser (“Purchaser”, “you” or “your”) for the warranty period set forth below under normal and proper service conditions, when properly installed and used as decking in residential applications, as long as the Purchaser owns the residence upon which the decking materials are installed.

25-Year Coverage Fiberon® Horizon® Decking, Fiberon Horizon Symmetry™ Collection Decking, Fiberon ProTect Advantage® Decking, Fiberon ProTect® Decking, Fiberon Sanctuary® Decking, and Fiberon Good Life™ Decking

20-Year Coverage Fiberon ArmorGuard® Decking, Veranda® ArmorGuard Decking and Railing, Fiberon Xtreme Decking, and Fiberon Xtreme Wide Decking

Stain Resistance Fiberon warrants that the Fiberon Products named above are and will be from the date of residential consumer purchase for the term coverage stated above, resistant to permanent staining resulting from spills of food and beverage items that would typically be present on a residential deck, provided that the Fiberon Products were installed , cared for and maintained in accordance with the Fiberon written instructions, the Fiberon Care and Maintenance Instructions found on www.fiberondecking.com and the conditions stated above .

Fade Resistance Fiberon warrants that the Fiberon Products are and will be, from the date of residential consumer purchase for the term coverage stated above, resistant to color change from light and weathering exposure as measured by color change in excess of 5 Delta E (Hunter) units provided that the Fiberon products were installed, cared for and maintained in accordance with the Fiberon written instructions and the Fiberon Care and Maintenance instructions found on www. fiberondecking.com and the conditions stated below.

Exclusions from Stain and Fade Warranty Coverage Fiberon does not warrant its Fiberon Products to be stain or fade proof. When installed, cared for and maintained properly in the residential exterior deck environment, Fiberon Decking products provide stain and fade resistance. However, no material is stain or fade proof, especially but not only when stains result from spilled or otherwise substances that are not properly cleaned or when the materials are exposed to years of UV exposure and the elements. Without limitation on any other provision of this Limited Warranty, Fiberon does not warrant for stain resistance resulting from spilled or otherwise applied substances that are not properly cleaned with soap and water or mild household cleaners immediately.

For the most up-to-date information, visit fiberondecking.com.

Voiding Stain and Fade Warranty Coverage All warranties are void and excluded in their entirety in any of the following events: • Failure to install, care for and maintain the Fiberon Products in accordance with the Fiberon written instructions, and the Fiberon Care and Maintenance instructions found on www.fiberondecking.com and the conditions stated below voids all warranties in their entirety. • Use of abrasive compounds of acidic or basic pH, strong solvents, oil based paints or stains, metallic rust, concrete or masonry products, air or water borne minerals and other abnormal residential deck use items will damage the Fiberon Products and voids all warranties in their entirety. • Direct or indirect contact with the Fiberon Products of extreme heat sources (over 250 degrees) voids all warranties in their entirety. • Damaging, gouging, scraping or puncturing the surface of the Fiberon Products voids all warranties in their entirety. • Paint or applying other coating materials to Fiberon Products voids all warranties in their entirely. Compliance with the Fiberon Care and Maintenance Instructions is required and a condition precedent to any warranty or warranty claim. Without limitation on any other provision of this Limited Warranty to qualify for coverage, you must have tried cleaning the affected area of your deck using the instructions indicated within this document and within the Care and Maintenance Instructions provided online at www.fiberondecking.com. If the affected area still remains unsatisfactory after you have tried these cleaning procedures, then you must have the affected area of your deck professionally cleaned at your expense. If the affected area remains unsatisfactory after the professional cleaning, you must contact Fiberon Consumer and Technical Support (800-573-8841) and provide proof of the professional cleaning within 30 days of the professional cleaning. The limited warranty set forth in this Limited Warranty is the only warranty (whether written or oral, express or implied) Fiberon makes for your Fiberon Product or Fiberon Fasteners; it is subject to all terms and conditions stated herein and no one (including but not limited to a Fiberon dealer, installer, reseller, agent or employee) is authorized to modify, expand or add to this limited warranty. Fiberon makes no other representation, guarantee or warranty. No one is authorized to make any representation, guarantee or warranty on Fiberon’s behalf, and Fiberon shall not be bound by or liable for, any representation, guarantee, warranty, or condition with regard to any Fiberon Product or Fiberon Fastener other than as expressly stated in this Limited Warranty. THIS LIMITED WARRANTY COMPRISES FIBERON’S SOLE AND ENTIRE WARRANTY AND OBLIGATION IN CONNECTION WITH FIBERON PRODUCTS OR FIBERON FASTENERS. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, CONDITION, SUITABILITY, OR PERFORMANCE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED. ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NOT EFFECTIVELY DISCLAIMED ARE LIMITED TO THE APPLICABLE STATUTE OF LIMITATIONS BUT IN NO EVENT WILL EXTEND BEYOND THE APPLICABLE WARRANTY PERIOD. FIBERON EXCLUDES AND WILL NOT PAY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT, REGARDLESS OF THE BASIS OF ANY CLAIM OR LIABILITY, SHALL FIBERON BE LIABLE FOR ANY DAMAGES, OF ANY NATURE OR DESCRIPTION WHATSOEVER, EXCEEDING, AND ANY LIABILITY SHALL BE LIMITED TO, THE ACTUAL PURCHASE PRICE OF THE DEFECTIVE PRODUCT AS ADJUSTED ON THE BASIS OF THE PRORATED WARRANTY SCHEDULE PROVIDED HEREIN.

Warranty Claim Procedure 1. Make a Claim To make a warranty claim, the Purchaser must send a copy of this warranty document, copy of original proof of purchase, and photos of the defective or nonconforming Fiberon Product to the address below. Such proof of purchase must be from an authorized Fiberon Product dealer and must show (1) the date of the purchase and (2) that sufficient Fiberon Product has been purchased to cover the number of lineal feet claimed to be damaged. All warranty claims must be received by Fiberon within the Warranty Period and in no event later than thirty (30) days after any discovery of a possible nonconforming nature of or other failure of the Fiberon Product or Fiberon branded fastener.

2. Submit a Claim Claims and Notices must be sent to: Fiberon Consumer and Technical Support Department 181 Random Dr. New London, NC 28127 Phone 844-226-3958 | Fax 704-463-1750 | email info@fiberondecking.com For the most up-to-date information, visit fiberondecking.com.

3. Temporary Repairs and Determination Upon discovering a possible defect of the Fiberon Product, Purchaser must make temporary repairs or cordon off the area at the Purchaser’s expense to protect all property and persons that could be affected. If needed, the Purchaser must allow Fiberon to enter the property into which the Fiberon Product is installed to inspect the nonconforming product. Fiberon must have made a determination on the warranty claim before any permanent repairs or removal of materials may be undertaken. No products shall be returned to Fiberon unless directed and authorized by Fiberon in writing to do so. Any removal or disposal of defective products shall be at Purchaser’s expense.

General Conditions, Exclusions and Limitations Purchaser’s Sole Remedy Purchaser’s Sole Remedy. Purchaser’s sole remedy, and Fiberon’s sole liability, for any claim whatsoever relating to the Fiberon Product, including without limitation any claims arising out of the marketing, purchase, installation, use, storage, possession or maintenance of Fiberon Products (whether such claim arises in contract, warranty, tort, gross negligence, negligence, strict liability, statutes or regulations or otherwise) or any claims that the Fiberon Products failed to perform as warranted above, is and shall be the replacement of the defective Fiberon Product with new Fiberon Product in an amount equal to the volume (linear feet) of defective material as listed on the Prorated Warranty Schedule contained herein. Replacement Fiberon material will be as close in color, design and quality to the original installation as reasonably possible, in Fiberon’s discretion and determination, but Fiberon does not guarantee an exact match as colors and designs may change. Additionally, Purchaser agrees to the use of such fasteners as adequate for reinstallation of the furnished board, irrespective of existing method. Fiberon may, at its option, elect to refund the percentage of the original purchase price listed under Recovery on the Prorated Warranty Schedule in lieu of replacing the defective product.

Exclusions and Limitations of Certain Damages In no event will Fiberon be liable for any direct, indirect, incidental, special, consequential, punitive, exemplary, statutory, special, or other, damages based upon the Fiberon Products or resulting, directly or indirectly, from any defect in the Fiberon Products, including but not limited to damage to, diminution in value of and/or loss of use or enjoyment of, any property or part thereof, whether based on contract, tort, strict liability, statute, regulation or otherwise, even if Fiberon is expressly advised about the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages in certain circumstances, so the above limitation may not apply to you. In addition, this Limited Warranty does not cover and Fiberon shall not be liable for any installation, removal or reinstallation costs. Fiberon does not warrant against and is not responsible for, and no express or implied warranty shall be deemed to cover, any condition attributable to: (1) improper installation of Fiberon products and/or failure to abide by Fiberon’s written instructions and any applicable laws or building codes, including but not limited to improper structural support, fastening, ventilation or gapping; (2) use of Fiberon Products beyond normal use or in an application not recommended or permitted by Fiberon’s written instructions and applicable laws and building codes; (3) movement, distortion, collapse or settling of the ground or the supporting structure on which Fiberon Products are installed; (4) Defects in or failure arising from decking structure resulting from water caused by improper installation, workmanship, maintenance or repair; (5) any Act of God (including but not limited to flooding, hurricane, tornado, wind, earthquake, lightning, hail, etc.); (6) discoloration, fading, spotting or staining from or caused, in whole or in part, by mold, mildew, other fungal growth, organic materials, metallic oxides or particles (including but not limited to rust or corrosion of any fasteners), dirt, other atmospheric or environmental pollutants, foreign substances such as grease or oil, chemicals (including but not limited to those found in cleaners), or normal weathering (defined as natural efflorescence, exposure to sunlight, weather and atmospheric conditions which causes any colored surface to gradually fade, flake, chalk, or accumulate dirt or stains); (7) damage resulting from casualty, fire or exposure to heat sources such as cooking devices or retro-reflective surfaces; (8) the application of paints, stains, surface treatments or other chemical substances including but not limited to cleaners or pesticides; (9) fading, flaking or other deterioration of any paints, stains or other coatings placed on the Fiberon Products; (10) climate change, environmental conditions, static electricity or any cause beyond the control of Fiberon; (11) variations or changes in color of Fiberon Products; (12) improper handling, maintenance, storage, abuse or neglect of Fiberon Products by Purchaser or others; (13) ordinary wear and tear; (14) impact from objects; or (15) any fasteners not supplied or approved by Fiberon.

For the most up-to-date information, visit fiberondecking.com.

Additional Terms and Limitations The suitability of the Fiberon Products for Purchaser’s property for the installation and use of the Fiberon Products, including but not limited to whether the Fiberon Product meets the requirements of any applicable building or safety code or similar regulation relating to Purchaser’s property, is the responsibility of the Purchaser and/or its design professionals, and not that of Fiberon. Fiberon does not provide architectural or engineering services. Fiberon makes no express or implied warranty or representation as to the suitability of the Fiberon Products for, or actual performance, capabilities or operation of the Fiberon Products at, Purchaser’s property or under the conditions of Purchaser’s use. Without limitation on any other provision of this Limited Warranty, all warranties, whether express or implied, and including this Limited Warranty, are void if any one or more of the following applies or occurs: (i) the Fiberon Product is not installed, maintained and/or used strictly in accordance with Fiberon’s written instructions, and all applicable laws, codes and regulations; (ii) misuse of the product, whether foreseeable or unforeseeable; (iii) failure of proper and timely maintenance or repair; (iv) failure to provide timely notice to Fiberon of any failure or defect of the Fiberon Product; or (v) use of fasteners other than the Fiberon branded fasteners or approved hidden fasteners listed on fiberondecking.com to the extent that the Fiberon Product failures resulted from the use of non-approved fasteners.

For the most up-to-date information, visit fiberondecking.com.

Choice of Law North Carolina law shall govern the interpretation of this Limited Warranty and any claim that Fiberon has breached it, regardless of conflict of law principles. FIBâ&#x20AC;&#x201C;0293-LIT Rev C 0216

Prorated Stain and Fade Limited Warranty Schedule 20-Year Residential

25-Year Residential

Year of Claim

0 - 10 years 11 - 12 years 13 - 14 years 15 - 16 years 17 - 18 years 19 - 20 years

0 - 10 years 11 - 13 years 14 - 16 years 17 - 19 years 20 - 22 years 23 - 25 years

Recovery

100% 80% 60% 40% 20% 10%

For the most up-to-date information, visit fiberondecking.com.

FIBERONDECKING.COM 1.800.573.8841

Fiberon, Paramount, Horizon, Permatech, ProTect Advantage, ProTect Advantage FR, Good Life, Symmetry, Sanctuary, Phantom and ClearVisionSystem are trademarks of Fiber Composites, LLC, registered in the U.S. and other countries. MKT LIT PROD GUIDE 3/16