www.feeneyinc.com 800-888-2418
SPECIFICATION SHEET
24V 96W Driver
• • • • •
RoHS
Compliant
Specifications Input
Output
Environment
Additional Information
UL Class 2 power supply Constant voltage output Adjustable amperage / voltage output Universal AC input / full range (up to 295VAC) Protections: short circuit / overload / over voltage / over temperature • High efficiency up to 88.5% • IP 64 rating – suitable for dry / damp locations • Cooling by free air convection
Voltage ¹ Current Frequency Efficiency Wire or Terminal Connection Voltage Voltage Adjustment Range Current Adjustment Range Current Power (wattage) Wire or Terminal Connection # Output Connections ² Ripple & Noise (max) Operating Temp. ³ Operating Humidity IP Rating / Location Class 2 Compliant
100 - 240VAC; 277VAC (North America only) 1.1A/115VAC; 0.55A/230VAC; 0.45A/277VAC 47 ~ 63Hz 88.5% 18 AWG wire leads w/ framed ground connection 24VDC 20.4 ~ 24V 3 ~ 4A 0 ~ 4A 96W (refer to "Derating Curve") 18AWG wire leads 1 150mVp-p -22 ~ +122°F (-30 ~ +50°C) 20 ~ 95% RH non-condensing IP 64, suitable for dry and damp locations Yes
Safety Standards
UL879, UL1310, UL8750; UL # E334687, E320521, E307078; CE
Housing / Cooling
Plastic case / free air convection
Dimmability ⁴
May be paired with a compatible low voltage PWM dimmer/controller installed between the secondary output of driver and load (LED lighting)
Dimensions Weight Warranty
Feeney Lighting
7.87 x 2.78 x 1.38 in. (L x W x H) 1.15 lb. Two (2) Years
1 OF 2
www.feeneyinc.com
www.feeneyinc.com 800-888-2418
35
6.26
T case: Max. Case Temperature.
SPECIFICATION SHEET
24V 96W Driver Mechanical Specifications Output voltage and current adjustment : remove the upper case and adjust through SVR1 & SVR2 shown in the diagram.
100-240VAC~ 50/60 Hz
SVR1
2.78 in.
AC/L(Brown) AC/N(Blue) Ground (Green/Yellow)
V+ (Red) V- (Black)
SVR2 To Low Voltage LED Load
SVR1 Output voltage adjustment
7.80 in.
SVR2 Output current adjustment 1.30 in.
Fosc : 100KHz
Block Diagram Output voltage and current adjustment : EMI FILTER POWER PFC SVR2 shown in diagram. & Remove the upper case and adjust through SVR1 &SWITCHING CIRCUIT SVR1 RECTIFIERS
I/P
RECTIFIERS & FILTER
+V -V O.L.P.
SVR2
FG
O.L.P. PFC CONTROL
DETECTION CIRCUIT
PWM & PFC CONTROL
SVR1 Output voltage adjustment
O.V.P. SVR2 Output current adjustment
Derating Curve Derating Curve
Static Characteristics Static Characteristics Curve 100
100
90 80
230VAC Input only
80 70
LOAD (%)
LOAD (%)
60 40
20
-30
-25
-10
0
15
30
40
50 (HORIZONTAL)
60 50 40
90
AMBIENT TEMPERATURE ( )
100
125
135
145
155 165
175
180
200
230
295
INPUT VOLTAGE (V) 60Hz
Safety & Warnings • • • • •
Turn power OFF at main breaker before servicing or installing this product. File Name:PLN-100-SPEC 2012-12-2 This product is intended to be installed and serviced by a qualified, licensed electrician. Install in accordance with the National Electric Code, and local regulations. Proper heat dissipation will prolong the working lifespan of this product. Install in a well-ventilated area free from explosive gases and vapors. Drivers are rated for maximum power output at optimum thermal and voltage conditions. Please refer to the driver specifications for maximum load ratings. • Ensure a compatible LED fixture with the correct operating voltage is installed with this product. • Ensure proper gauge wire is installed. When choosing wire, factor in voltage drop and amperage rating. Improper wire gauge installation may overheat wires, leading to electric shock or fire. • Use only UL listed wire nuts and clamp accessories with this product.
Feeney Lighting
2 OF 2
www.feeneyinc.com