ABRASIVES A SPECIALIST GUIDE BY TIMco
The TIMco ADDAX abrasives range consists of a wide variety of abrasive rolls, sheets, pads, discs and belts. Meeting the high demands of the modern woodworking, decorating and metalworking industries using tear and crack resistant backing paper, heat resistant resin adhesive and premium quality abrasive grit.
SANDING GRADE GUIDE: COARSE: 40 - 60 GRIT The coarse grade quickly removes unwanted coatings and finishes from the surface in preparation for lacquers, varnishes and paints. Can be used with chemical stripping compounds.
MEDIUM: 80 - 100 GRIT The medium grade removes unwanted coatings and finishes from the surface in preparation for lacquers, varnishes and paints. Can be used with chemical stripping compounds.
FINE: 120 - 150 GRIT The fine grade flattens and smooths the surface in preparation for lacquers, varnishes and paints. Can be used with chemical stripping compounds.
EXTRA FINE: 180 - 240 GRIT Used for final preparations before finishing. Ideal for polishing and achieving a super smooth finish.
ULTRA FINE: 240 - 1200 GRIT Used for final sanding and finishing. Ideal for achieving a keyed surface in between coats.
SANDPAPER ROLLS High quality aluminium oxide abrasive with a medium strength backing paper to provide long life and excellent malleability.
CRACK RESISTANT
LONG LIFE
ANTI-CLOG COATING
SANDPAPER ROLL YELLOW Manufactured using lightweight 180g backing paper, allowing for excellent flexibility and malleability without tearing and cracking. The premium quality aluminium oxide grit allows for excellent material removal. Ideal for preparation of intricate and delicate applications. Product Code
Length (m)
Width (mm)
Grit
Abrasive Grade
Qty
231541 231999 231405
10 10 10
115 115 115
60 80 120
Coarse Medium Fine
1 1 1
TYPE - ABR
SUB TYPE - ABR01
SANDPAPER ROLL GREEN Manufactured using premium 225g backing paper, allowing for hard wearing and flexible sanding performance. The premium quality aluminium oxide grit allows for excellent material removal. Ideal for hand and powertool sanding. Product Code
Length (m)
Width (mm)
Grit
Abrasive Grade
Qty
231022 231117 231823
10 10 10
115 115 115
60 80 120
Coarse Medium Fine
1 1 1
TYPE - ABR
SUB TYPE - ABR01
SANDPAPER ROLL - RED Manufactured using heavy duty 250g backing paper, allowing for long lasting and hard wearing sanding performance. The premium quality calcined aluminium oxide grit allows for excellent material removal in a wide variety of woodworking, painting and decorating applications. Product Code
Length (m)
Width (mm)
Grit
Abrasive Grade
Qty
231004 231210 231311
10 10 10
115 115 115
60 80 120
Coarse Medium Fine
1 1 1
TYPE - ABR
SUB TYPE - ABR01
FULL SANDING SHEETS Using high quality, flexible and durable backing paper and premium quality abrasive material, this selection of full sanding sheets is ideal for a majority of hand and block sanding applications.
CRACK RESISTANT
LONG LIFE
ANTI-CLOG COATING
WET & DRY Premium quality silicon carbide abrasive with a flexible waterproof backing paper. When used in conjunction with water this paper gives a smoother surface compared to dry sanding on metal, wood, paint and varnish whilst reducing dust. Product Code 231485 231636 231357
Size WxL (mm) 230 x 280 230 x 280 230 x 280
Grit
Abrasive Grade
600 1200 180, 320
Medium Ultra Fine Assorted
TYPE - ABR
Qty 5 5 5
SUB TYPE - ABR03
SANDING SHEETS High quality aluminium oxide abrasive with a high strength anti-crack backing paper to provide a superior lifespan. Ideal for heavy hand or power sanding on wood, paint, varnish, plaster and filler. Product Code 231002 231191 231505 231123 TYPE - ABR
Size WxL (mm) 230 x 280 230 x 280 230 x 280 230 x 280
Grit
Abrasive Grade
80 120 180 80, 120, 180
Medium Fine Extra Fine Assorted SUB TYPE - ABR02
Qty 5 5 5 5
SANDING BELTS Manufactured using a heat resistant cloth backing and premium quality aluminium oxide grit, TIMco ADDAX sanding belts have been designed to maintain sanding performance, prolong lifespan and meet the extreme requirements of modern belt sanders.
HEAT RESISTANT BACKING
LONG LIFE
ANTI-CLOG COATING
TIMco
BEST Seller
Universal fitting compatible with: Makita Ryobi and more. Product Code
Length (mm)
Width (mm)
Grit
Abrasive Grade
Qty
231069 231841 231645
533 533 533
75 75 75
40 80 120
Coarse Medium Fine
5 5 5
231429 231987 231321
457 457 457
75 75 75
40 80 120
Coarse Medium Fine
5 5 5
231147 231258 231369
610 610 610
100 100 100
40 80 120
Coarse Medium Fine
5 5 5
TYPE - ABR
SUB TYPE - ABR06
SANDPAPER PADS High quality aluminium oxide abrasive with a high strength heat and wear resistant backing paper to provide a superior lifespan and improved extraction.
CRACK RESISTANT
HOOK & LOOP
ANTI-CLOG COATING
DELTA SANDING PAD Compatible with most leading brands of oscillating multi-tools. Ideal for heavy power sanding on wood, paint, varnish, plaster and filler. Product Code
Universal fitting compatible with: Bosch, DeWalt, Festool, Milwaukee, Hitachi, Einhell, and more.
231005 231119 231410 231360 231909 231333
Size WxL (mm) 95 x 95 95 x 95 95 x 95 95 x 95 95 x 95 95 x 95
Grit
Abrasive Grade
Qty
60 80 120 180 240 80, 120, 180
Coarse Medium Fine Extra Fine Extra Fine Assorted
5 5 5 5 5 5
TYPE - ABR
SUB TYPE - ABR07
RANDOM ORBITAL SANDING DISC Ideal for heavy power sanding on wood, paint, varnish, plaster and filler. Product Ø Ø Code (mm) (inch)
Universal fitting compatible with: Bosch, DeWalt, Ryobi, Makita, Festool, Hitachi and more.
231019 231555 231378 231200 231992
125 125 125 125 125
5 5 5 5 5
231080 231144
150 150
6 6
Abrasive Grade
Grit
Qty
60 Coarse 80 Medium 120 Fine 180 Extra Fine 80, 120, 180 Assorted 80 120
TYPE - ABR
5 5 5 5 5
Medium Fine
5 5
SUB TYPE - ABR09
DETAIL SANDING SHEET Ideal for heavy power sanding on wood, paint, varnish, plaster and filler. Product Code 231753 231081 231811 TYPE - ABR
Universal fitting compatible with: Black & Decker, Bosch and more.
Size WxL (mm) 95 x 136 95 x 136 95 x 136
Grit
Abrasive Grade
80 120 180
Medium Fine Extra Fine
Qty
SUB TYPE - ABR08
5 5 5
1/3 SANDING SHEETS High quality aluminium oxide abrasive with a high strength heat and wear resistant backing paper to provide a superior lifespan. Ideal for heavy power sanding on wood, paint, varnish, plaster and filler.
CRACK RESISTANT
LONG LIFE
ANTI-CLOG COATING
PUNCHED 1/3 SANDING SHEETS Premium quality sanding sheets with hook & loop backing. Perforated to maximise dust extraction and compatibility with power sanders. Product Code
Universal fitting compatible with: Bosch, Makita, DeWalt, Einhell, Ryobi, and more.
231050 231855 231666 231112
Size WxL (mm) 93 x 185 93 x 185 93 x 185 93 x 185
Grit
Abrasive Grade
Qty
80 120 180 80, 120, 180
Medium Fine Extra Fine Assorted
5 5 5 5
TYPE - ABR
SUB TYPE - ABR04
UNPUNCHED 1/3 SANDING SHEETS Premium quality sanding sheets designed to wrap around sanding base plates and clip into place. The crack and wear resistant backing paper allows for long lasting sanding performance. Product Code 231467 231900 231751 231222 231599 TYPE - ABR
Universal fitting compatible with: Bosch, Makita, DeWalt, Einhell, Ryobi, and more.
Size WxL (mm) 93 x 230 93 x 230 93 x 230 93 x 230 93 x 230
Grit
Abrasive Grade
60 80 120 180 80, 120, 180
Coarse Medium Fine Extra Fine Assorted SUB TYPE - ABR05
Qty 5 5 5 5 5
DRYLINING DISCS & STEEL WIRE WOOL
DRYLINING DISCS High quality sandpaper discs with white aluminium oxide abrasive for effective material removal. Perforated for excellent dust extraction. Available in a wide variety of abrasives grades to allow for rapid removal of material to final preparation before finishing. Compatible with all leading brands of drywall power sanders.
TEAR & CRACK RESISTANT
ANTI-CLOG COATING
DUST EXTRACTION
Product Code
Ø (mm)
Ø (inch)
Grit
Abrasive Grade
Qty
231101 231546 231894 231025 231232 231741
225 225 225 225 225 225
9 9 9 9 9 9
40 60 80 120 180 220
Coarse Coarse Medium Fine Extra Fine Extra Fine
25 25 25 25 25 25
TYPE - ABR
SUB TYPE - ABR10
STEEL WIRE WOOL Used by woodworkers and craftsmen when cleaning metal and wood in preparation for lacquers, varnishes and paints.
WIRE WOOL GRADE GUIDE: COARSE The coarse grade quickly removes unwanted coatings and finishes from the surface in preparation for lacquers, varnishes and paints. Can be used with chemical stripping compounds.
MEDIUM The medium grade removes unwanted coatings and finishes from the surface in preparation for lacquers, varnishes and paints. Can be used with chemical stripping compounds.
FINE The fine grade flattens and smooths the surface in preparation for lacquers, varnishes and paints. Can be used with chemical stripping compounds. Product Code
Weight (g)
Abrasive Grade
Grade Code
Qty
231659 231308 231007
200 200 200
Coarse Medium Fine
3# 1# 00#
1 1 1
TYPE - ABR
SUB TYPE - ABR11
DRILL WIRE BRUSHES Nylon and steel wire brushes for light de-burring, paint, rust and dirt removal. For surface preparation of Sheet metal, wood, stone, cast iron and more. Suitable for all drills with either a ¼” quick release or a three jaw chuck. NYLON
SHEET METAL
WOOD
STEEL
STONE
STEEL
SHEET METAL
CAST IRON
DRILL NYLON BRUSHES
Cup Brush
The nylon brush is less aggressive and ideal for light de-burring, polishing and finishing. Product Code Wheel Brush 50SCN 75SCN 75SWN 100SWN
Nylon Shank Ø Thickness (inch) (mm) NYLON CUP BRUSH 50 1/4” Hex 1.2 75 1/4” Hex 1.2 NYLON WHEEL BRUSH 75 1/4” Hex 1.2 100 1/4” Hex 1.2
Ø (mm)
TYPE - PTB
End Brush
Max R.P.M
Pack Qty
4,500 4,500
1 1
4,500 4,500
1 1
SUB TYPE - PTB01 / PTB04
DRILL CRIMPED STEEL WIRE BRUSHES Crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
Cup Brush
Product Code 50SCC 75SCC
Wheel Brush
50SWC 75SWC 100SWC 25SEC
Wire Shank Ø Thickness Max (inch) R.P.M (mm) STEEL WIRE CUP BRUSH 50 1/4” Hex 0.3 4,500 75 1/4” Hex 0.3 4,500 STEEL WIRE WHEEL BRUSH 50 1/4” Hex 0.3 4,500 75 1/4” Hex 0.3 4,500 100 1/4” Hex 0.3 4,500 STEEL WIRE END BRUSH 25 1/4” Hex 0.3 4,500
Ø (mm)
TYPE - PTB
Wheel Brush
Qty
1 1 1 1 1 1
SUB TYPE - PTB01 / PTB04 / PTB07
DRILL TWISTED KNOT STEEL WIRE BRUSH The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Product Code 75SWT TYPE - PTB
Wire Shank Ø Thickness Max (inch) R.P.M (mm) STEEL WIRE WHEEL BRUSH 75 1/4” 0.5 12,500
Ø (mm)
Qty
1
SUB TYPE - PTB05
GRINDER CRIMPED STEEL WIRE BRUSHES Suitable for use with angle and bench grinders. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material. Use stainless steel to reduce the likelihood of cross contamination when cleaning the base material. STEEL
STAINLESS STEEL
STAINLESS STEEL NON-FERROUS
ALUMINIUM
STEEL
SHEET METAL CAST IRON
CUP BRUSHES Suitable for use with angle grinders. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material. Wire Max Thickness R.P.M (mm) STEEL WIRE CUP BRUSH 75TCC 75 M14 0.3 12,500 100TCC 100 M14 0.3 8,500 125TCC 125 M14 0.3 6,500 150TCC 150 M14 0.3 6,500 STAINLESS STEEL WIRE CUP BRUSH 75TCCSS 75 M14 0.5 8,500 100TCCSS 100 M14 0.5 8,500 Product Code
75TCC
75TCCSS
Ø (mm) Arbor
TYPE - PTB
Qty
1 1 1 1 1 1
SUB TYPE - PTB09 / PTB02
BEVEL BRUSHES Suitable for use with angle grinders. The crimped stainless steel wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
115TBS
Wire Max Thickness R.P.M (mm) STEEL WIRE BEVEL BRUSH 115TBS 115 M14 0.3 12,500 STAINLESS STEEL WIRE BEVEL BRUSH 115TBCSS 115 M14 0.5 8,500 Product Code
115TBCSS
Ø (mm) Arbor
TYPE - PTB
Qty
1 1
SUB TYPE - PTB12 / PTB13
WHEEL BRUSH WITH REDUCER SET Suitable for use with bench grinders. Includes reducing bushes reduces bore from 32mm to 25, 22, 20, 16 and 12mm (two of each).
150HWS
Product Code 150HWS 200HWS TYPE - PTB
Wire Max Thickness R.P.M (mm) STEEL WIRE WHEEL BRUSH 150 32 0.3 6,000 200 32 0.3 4,500
Ø Arbor (mm)
Qty
1 1
SUB TYPE - PTB18
GRINDER TWISTED KNOT STEEL WIRE BRUSHES Suitable for use with angle and bench grinders. The 0.5mm twist steel wire is hard wearing and gives an aggressive removal of paint, rust, rubber, concrete or dirt. The metal ring can be removed to increase usage life.. Use stainless steel to reduce the likelihood of cross contamination when cleaning the base material. STAINLESS STEEL
STAINLESS STEEL NON-FERROUS
STEEL
ALUMINIUM
STEEL
SHEET METAL CAST IRON
CUP BRUSHES 100TCTSS
Suitable for use with angle grinders. The 0.5mm steel wire is hard wearing and gives an aggressive removal of paint, rust, rubber, concrete or dirt. The metal ring can be removed to increase usage life. Product Code
Ø (mm) Arbor
Wire Thickness (mm)
Max R.P.M
STEEL WIRE CUP BRUSH 75 M14 0.3 12,500 100 M14 0.3 8,500 STAINLESS STEEL WIRE CUP BRUSH 100TCCSS 100 M14 0.5 8,500 75TCC 100TCC
80TCT
TYPE - PTB
Qty
1 1 1
SUB TYPE - PTB10 / PTB11
BEVEL BRUSHES 100TBTSS
Suitable for use with angle grinders. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas. Product Code
Ø (mm) Arbor
Wire Thickness (mm)
Max R.P.M
STEEL WIRE BEVEL BRUSH 100 M14 0.3 12,500 STAINLESS STEEL WIRE BEVEL BRUSH 100TBTSS 100 M14 0.5 12,500 100TBT
100TBT
TYPE - PTB
115TWTSS
Qty
1 1
SUB TYPE - PTB14 / PTB15
WHEEL BRUSHES Ideal for accessing awkward areas. Aggressive removal of paint, rust, rubber, concrete or dirt.
115TWT Suitable for use with angle grinders.
Suitable for use with bench grinders.
125HWT
Product Code
Ø (mm) Arbor
Wire Thickness (mm)
Max R.P.M
STEEL WIRE WHEEL BRUSH 115 M14 0.5 12,500 STAINLESS STEEL WIRE WHEEL BRUSH 115TWTSS 115 M14 0.5 12,500 STEEL WIRE WHEEL BRUSH 125HWT 125 22 0.5 12,500 115TWT
TYPE - PTB
Qty
1 1 1
SUB TYPE - PTB16 / PTB17 / PTB03
WIRE HAND BRUSHES A selection of professional hand brushes, ideal for a wide variety of applications including the general surface preparation of wood and metal. Frequently used for paint and rust removal and tool maintenance. STAINLESS STEEL
STAINLESS STEEL NON-FERROUS
STEEL
STAINLESS STEEL
STEEL
ALUMINIUM
STEEL
SHEET METAL CAST IRON
WIRE HAND BRUSHES A high density wire brush with an ergonomic plastic handle. Ideal for a more aggressive removal of paint, rust, scale, grout or dirt. Sold in three brush types to suit a variety of applications. Product Code
BRASS
RWHB BWHB YWHB TYPE - WBR
Length (mm
Material
225 225 225
Steel Stainless Steel Brass
Box Carton Qty Qty (Box) 12 10 12 10 12 10
SUB TYPE - WBR02
WOODEN HANDLE SCRATCH BRUSH
PLASTIC HANDLE SCRATCH BRUSHES
Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. (Stainless steel reduces contamination of the base material).
A moisture and chemical resistant ergonomic handle. Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt.
Product Code 3SBHD 4SBHD 3SBSS 4SBSS
Width (mm)
Length (mm)
No. of Rows
Box Carton Qty Qty (Box)
STEEL SCRATCH BRUSH 28 295 3 x 18 10 33 295 4 x 18 10 STAINLESS STEEL SCRATCH BRUSH 28 295 3 x 16 10 33 295 4 x 16 10
TYPE - WBR
10 10
Product Code 4SBP 6SBP
Width (mm)
Length (mm)
No. of Rows
Box Carton Qty Qty (Box)
STEEL SCRATCH BRUSH 30 280 4 x 15 10 41 280 4 x 15 10
TYPE - WBR
10 10
SUB TYPE - WBR01
10 10
SUB TYPE - WBR01
SCRATCH BRUSH WITH SCRAPER
FILE CLEANING BRUSH
Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt.
For cleaning embedded filings from both wood and metal files.
Product Code 4SSBHD TYPE - WBR
Width (mm)
Length (mm)
No. of Rows
Box Carton Qty Qty (Box)
STEEL SCRATCH BRUSH 33 295 4 x 18 10 SUB TYPE - WBR01
10
Product Code FCB TYPE - WBR
No. of Rows
Box Qty
Carton Qty (Box)
STEEL CLEANING BRUSH 110 x 40 10 SUB TYPE - WBR03
10
UK: +44 (0)1829 261111 Northern Ireland: +44 (0)2890 992305 Ireland: +353 (0)4763538
www.TIMco.co.uk www.TIMco.ie
TIMco House, Green Lane, Wardle, Nantwich, CW5 6BJ Fax: +44 (0)1829 261102 Fax: +44 (0)1829 261093 sales@TIMco.co.uk
Aviemore House, Hill Street, Monaghan, Ireland Fax: +353 (0)4763539 sales@TIMco.ie
ISSUE 1 - AUTUMN / WINTER 2019 - 20
Distributed by: