ISSUE NO: 3 Cover 3.indd 1
SUPPLIER OF SCREWS, FIXINGS, FASTENERS, POWERTOOL ACCESSORIES AND BUILDERS HARDWARE
SUPPLIED BY:
SU PPL I E R OF
SCREWS, FIXINGS, FASTENERS, POWER TOOL ACCESSORIES & BUILDERS HARDWARE
2016/17 22/09/2016 11:29:38
CONTENTS
TIMBER CONSTRUCTION SCREWS
07 - 24
DRYLINING CONSTRUCTION SCREWS
25 - 28
METAL CONSTRUCTION SCREWS
29 - 40
WINDOW FABRICATION SCREWS
41 - 46
NUTS, BOLTS, SETS AND WASHERS
47 - 58
FIXINGS AND FASTENERS
59 - 64
PLASTERBOARD FIXINGS 65 - 67 CONCRETE AND MASONRY FIXINGS
68 - 81
COLLATED AND LOOSE NAILS
82 - 95
BUILDERS METAL WORK 96 - 109 DRILLING 110 - 134 CUTTING 135 - 160 DRIVER BITS 161 - 166 HAND TOOLS AND ACCESSORIES
167 - 171
PROTECTION AND ADHESIVES
172 - 177
DOOR ACCESSORIES 178 - 181 SECURITY SOLUTIONS
182 - 188 1 1
CONTENTS
RECESS STYLES POZI / CROSS RECESS
TIM DRIVE RECESS
Standard recess for woodscrews, chipboard screws etc.
High performance recess on TIMco Multi-Fix and Velocity screws.
PHILLIPS RECESS
SQUARE RECESS / ROBERTSON DRIVE
Standard recess for self-drilling, drywall and window screws.
Recess on square drive pan self-drilling screws and solo screws.
COMBI RECESS A combination of a traditional slotted recess with a more common pozi recess.
HEAD TYPES COUNTERSUNK HEAD
BUGLE HEAD
Designed for countersinking into timber for a flush or recessed finish. May have ribs to assist countersinking.
A curved surface under the head to prevent damage or tearing to the plasterboard paper.
DOUBLE COUNTERSUNK
PAN / ROUND HEAD
Improved design on the countersunk head to give additional head strength and assist countersinking.
Head with a flat underside. Designed for application fixing against metal surfaces.
DOUBLE COUNTERSUNK WITH RIBS
WAFER / FLANGE HEAD
Ribs under head to assist with countersinking.
SHALLOW PAN COUNTERSUNK A special head designed to assist with clamping and countersinking.
2
Low profile head with a flat underside for applications where a large clamping area and an unobtrusive head is required.
HEXAGON HEAD Positive drive Hex Head with an integral washer to increase clamping effectiveness.
CONTENTS SOCKET BUTTON HEAD
SOCKET CAP HEAD
Designed for a raised finish with a flat underside to aid clamping.
An industry standard, requiring a hex key to loosen or tighten.
THREAD TYPES COARSE THREAD (up to 16 TPI)
TWIN THREAD
Also know as spaced threads, they are normally used for all timber applications.
Also known as twin lead threads, they are designed to give a fast insertion time in soft material.
FINE THREAD (over 16 TPI)
HI-LO THREAD
Also known as metric threads, they are only used in steel applications. Fine threads are for use with thicker steels. (5 - 12mm thickness).
Used in soft timbers, plastics and into thin sheet sections. Hi-Lo threads have superior holding power compared to a low TPI coarse thread in these types of material.
SELF TAPPING THREAD A common thread design mainly used in steel applications. (1-5mm)
POINT STYLES NEEDLE / GIMLET AND SUPER SHARP POINT (SS) Designed for piercing timber, MDF, plastic and light gauge metal up to 0.6mm without pre-drilling.
SELF DRILL POINT For drilling into metals without the need for pre-drilling.
AB POINT
C2 SLASH
For use in pre-drilled sheet material applications.
Twin cut for rapid "pick up" and reduced splitting.
B POINT
TYPE 17 POINT
For use in pre-drilled shallow holes.
Also known as slash point, they are used for fixing timber without the need to pre-drill. The cutting edge helps reduces splitting of the timber.
3
CONTENTS
GAUGE
MEASURING LENGTH
The gauge of the screw is determined by the size of the outside thread diameter.
Fasteners with the following head types are measured from the underside of the head to the point of the screw:
Gauge 0g 1g 2g 3g 4g 5g 6g 7g 8g 9g 10g 12g 13g 14g 15g 16g 18g 20g 24g
Metric (mm)
1.5 1.9 2.25 2.5 3.0 3.3 3.5 3.9 4.2 4.5 4.8 5.5 6.1 6.3 6.5 6.8 7.5 8.1 9.4
THREAD LENGTH
PAN / ROUND
WAFER / FLANGE
HEXAGON
Fasteners with the following head types are measured from the top of the countersunk to the point of the screw:
COUNTERSUNK
DOUBLE CS
BUGLE
RAISED HEAD
DCS WITH RIBS
TPI - THREADS PER INCH The TPI is the number of thread crests that can be counted within 1� (25.4mm)
TPI
Drill Tip
44
CONTENTS
METRIC/IMPERIAL SIZE COMPARISON CHART Listed beside the common imperial sizes are the metric equivalents. Also listed are common ‘even’ approximate metric equivalents in brackets. Imperial (inch)
Metric
Imperial (inch)
Metric
(mm)
1/64” 1/32” 3/64” 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32” 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2” 17/32” 35/64” 9/16” 37/64” 19/32” 39/64” 5/8” 41/64” 21/32” 43/64” 11/16” 45/64” 23/32” 47/64” 3/4” 49/64” 25/32” 51/64”
0.40 0.79 1.19 1.59 1.98 2.38 2.78 3.17 (3.0) 3.5 3.97 (4.0) 4.5 4.76 (5.0) 5.16 5.5 5.95 6.35 (6.0) 6.75 7.14 7.54 7.94 (8.0) 8.33 8.73 9.13 9.52 (10.0) 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70 (13.0) 13.49 13.89 14.29 (14.0) 14.68 15.08 15.48 15.88 (16.0) 16.27 16.67 17.06 17.46 17.86 18.26 18.65 19.05 (19.0) 19.45 19.84 20.24
13/16” 53/64” 27/32” 55/64” 7/8” 57/64” 29/32” 59/64” 15/16” 61/64” 31/32” 63/64” 1” 1-1/16” 1-3/32” 1-1/8” 1-5/32” 1-3/16” 1-7/32” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3” 3-1/4” 3-1/2” 3-3/4” 4” 4-1/2” 5” 5-1/2” 6” 6-1/2” 7” 7-1/2” 8” 8-1/2” 9” 9-1/2” 10” 11” 12” 13” 14” 15” 16” 18”
20.64 21.03 21.43 21.83 22.23 (22.0) 22.62 23.02 23.42 23.81 24.21 24.61 25.00 25.40 (25.0) 26.99 27.78 28.58 (28.0) 29.37 30.16 (30.0) 30.96 31.75 (32.0) 38.10 (38.0) 45.45 (45.0) 50.80 (50.0) 57.15 (57.0) 63.50 (65.0) 69.85 (70.0) 76.20 (75.0) 82.55 (82.0) 88.90 (90.0) 95.25 (95.0) 101.60 (100) 114.30 (115) 127.00 (125) 139.70 (140) 152.40(150) 165.10 (165) 177.80 (175) 190.50 (190) 203.20 (200) 215.90 (215) 228.60 (230) 241.30 (240) 254.00 (250/255) 279.40 (280) 304.80 (305) 330.20 (330) 335.60 (350/355) 381.00 (380) 406.40 (400/405) 457.20 (455/460)
(mm)
5
CONTENTS
PLATING & FINISH GUIDE Yellow (CR6) - Zinc electrolytic plating and yellow passivated after treatment for enhanced corrosion. Zinc (CR3) - A bright Zinc electrolytic plating with a clear toxin free finish. Complies with restrictions of hazardous substances in electrical/electronic equipment (ROHS) directive (2002/95/EC). Zinc (CR6) plating.
- A bright zinc electrolytic
Black Pass. - A zinc electrolytic plating with a black passivation after treatment to enhance corrosion resistance. Black Phos. - An immersed black phosphate plating for corrosion resistance and lubrication.
Exterior -A superior organic finish which is environmentally friendly and offers excellent resistance to corrosion in outdoor applications. Exterior includes; nano technology, silver ruspert, green and brown finishes. A2/Aust. SS - A non-magnetic austenitic steel suitable for many day to day external or corrosive applications offering an excellent resistance to corrosion. A4 SS - Similar to the A2 SS but more suitable for extremely corrosive applications, including marine environments. Martensitic SS - A magnetic, martensitic stainless steel with moderate heat resistance, with silver ruspert plating.
Nickel - An electroplated, high lustre, corrosion resistant finis
Bright
- Polished only.
Sherardised bonded plating.
- A dry galvanised, zinc
Galv. - A post-manufacturing electrogalvanic plating applied to the product. Pre-Galv. - A pre-manufacturing electro-galvanic plating applied to the product. FirmaGalv plating.
- A electro-galvanic
FirmaGalv+ - Similar to the electrogalvanic plating on FirmaGalv. This plating provides better corrosion resistance. Hot Dipped - A galvanised zinc plating which gives excellent corrosion resistance.
APPLICATION GUIDE
6
HARDWOOD
SOFTWOOD
CHIPBOARD
MDF
WOOD PANEL
PLASTIC
PLASTERBOARD
BRICK
CONCRETE
STONE
HOLLOW BLOCK
BLOCK
REINFORCED CONCRETE
HARD CONCRETE
CONCRETE (15-30)
KERBS/SLABS
CONCRETE PAVIORS
VITRIFIED CLAY PRODUCTS
SOFT CLAY
ENGINEERING BRICK
MEDIUM FACING BRICKS
SOFT FACING BRICK
CLAY PAVIORS
HARD SANDSTONE
SANDSTONE
CONCRETE ROOFING TILES
HARD SLATE
CLAY ROOF TILES
CERAMIC TILE
GLASS
MARBLE
PORCELAIN
DAMP/WET HOLES
UNDERWATER
LOW VENTILATION
HEAVY DUTY FIXING
REBAR
STEEL
ALUMINIUM
NONFERROUS METAL
STAINLESS STEEL
CAST IRON
THIN SHEET METAL
TIMBER CONSTRUCTION SCREWS 08 - VELOCITY 09 - C2 MULTI-PURPOSE 10 - C2 FLOORING 11 - C2 EXTERIOR 11 - C2 TONGUE-FIX 12 - CLASSIC
15 - SOLO 17 - TWIN-THREADED 18 - BLACKJAX 19 - MIRROR SCREWS 19 - CARCASS SCREWS 19 - SCREW CAPS
20 - MIXED TRAYS 20 - MIXED PACKS 21 - DECKING SCREWS 22 - TIMBER SCREWS 24 - COACH SCREWS
VELOCITY MULTI-PURPOSE SCREWS
TIMBER CONSTRUCTION SCREWS
VELOCITY®
Materials
Premium multi-use screw Available in:
Yellow
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials whilst achieving exceptional pull out resistance. Designed to give the user a consistent and reliable product that can be used in a variety of applications.
VELOCITY -
Yellow
Double Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
3.0 x 16 3.0 x 20 3.0 x 30 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 30 4.5 x 40 4.5 x 50
4 x 5/8 4 x 3/4 4 x 11/4 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/4 9 x 11/2 9x2
Product Code
Qty
Boxes
Size (Metric)
Size (Imp. equiv.)
Qty
45060VY 45070VY 45080VY 50030VY 50040VY 50045VY 50050VY 50060VY 50070VY 50075VY 50080VY 50090VY 50100VY 60040VY 60045VY 60050VY 60060VY 60070VY 60080VY 60090VY 60100VY 60120VY 60130VY 60150VY 60180VY 60200VY
4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 45 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200
9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 13/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 4 12 x 51/8 12 x 6 12 x 71/4 12 x 8
200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 200 100 100 100 100 100 100 100
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
12 x 6 12 x 7¼ 12 x 8 16 x 8 16 x 9 16 x 10 16 x 107/8 16 x 12
100 100 100 50 50 50 25 25
Boxes
30016VY 30020VY 30030VY 30040VY 35012VY 35016VY 35020VY 35025VY 35030VY 35035VY 35040VY 35045VY 35050VY 40016VY 40020VY 40025VY 40030VY 40035VY 40040VY 40045VY 40050VY 40060VY 40070VY 40080VY 45030VY 45040VY 45050VY
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
VELOCITY - TIM DRIVE -
Yellow
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
10 x 2 10 x 2½ 10 x 2¾ 10 x 3 10 x 4 12 x 3 12 x 4 12 x 4¾
200 200 200 200 100 200 100 100
Boxes (Driver bit included) 50050VYTX 50060VYTX 50070VYTX 50080VYTX 50100VYTX 60080VYTX 60100VYTX 60120VYTX
8
5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 100 6.0 x 120
Boxes (Driver bit included) 60150VYTX 60180VYTX 60200VYTX 80200VYTX 80225VYTX 80250VYTX 80275VYTX 80300VYTX
6.0 x 150 6.0 x 180 6.0 x 200 8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300
C2 MULTI-PURPOSE ADVANCED SCREWS
TIMBER CONSTRUCTION SCREWS
C2® MULTI-PURPOSE
Materials
Advanced screw Available in: Yellow
Zinc (CR3)
The C2 has been re-engineered around the backbone of the Classic, one of Europe’s largest selling multi-purpose screws. Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Note: Partially threaded from 70mm.
C2 CLASSIC -
Yellow
Double Countersunk with Ribs Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 25 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 100
6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8 x 23/4 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 10 x 4
2,000 1,800 1,700 1,500 1,200 800 600 500 400 800 600 400 375 350 300 300 225
3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 50 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75
4 x 1/2 4 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 11/2 6x2 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/4 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Tubs (V5 bit included) 35025C2TUB 35030C2TUB 40025C2TUB 40030C2TUB 40040C2TUB 40050C2TUB 40060C2TUB 40070C2TUB 40080C2TUB 50040C2TUB 50050C2TUB 50060C2TUB 50070C2TUB 50080C2TUB 50090C2TUB 50100C2TUB 60100C2TUB
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
50080C2 50090C2 50100C2 50120C2 60050C2 60060C2 60070C2 60080C2 60090C2 60100C2 60120C2 60130C2 60150C2 60180C2 60200C2
5.0 x 80 5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200
10 x 3 10 x 31/2 10 x 4 10 x 43/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8
200 100 100 100 200 200 200 200 100 100 100 100 100 100 100
C2 MULTI-PURPOSE -
Boxes 35012C2 35016C2 35020C2 35025C2 35030C2 35040C2 35050C2 40025C2 40030C2 40035C2 40040C2 40045C2 40050C2 40060C2 40070C2 40080C2 45030C2 45040C2 45050C2 45060C2 45070C2 45080C2 50030C2 50040C2 50045C2 50050C2 50060C2 50070C2 50075C2
Zinc (CR3)
Advanced screw
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
1,500 1,200 800 600 400 600 400 375 350 300
Tubs (V5 bit included) 40030C2ZTUB 4.0 x 30 40040C2ZTUB 4.0 x 40 40050C2ZTUB 4.0 x 50 40060C2ZTUB 4.0 x 60 40080C2ZTUB 4.0 x 80 50050C2ZTUB 5.0 x 50 50060C2ZTUB 5.0 x 60 50070C2ZTUB 5.0 x 70 50080C2ZTUB 5.0 x 80 500100C2ZTUB 5.0 x 100
9 9
C2 TRADE CASE & C2 FLOORING SCREW
TIMBER CONSTRUCTION SCREWS
C2 CLASSIC® TRADE CASE
Materials
Advanced screw Available in: Yellow
A strong metal case containing nine of the most popular C2 Screws and five V5 impact driver bits.
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Trade Case - Qty 1,800
C2SC
C2® FLOORING & MDF
3.5 x 16 6 x 5/8 3.5 x 25 6x1 4.0 x 30 8 x 11/4 4.0 x 40 8 x 11/2 4.0 x 50 8x2 5.0 x 60 10 x 21/2 5.0 x 70 10 x 23/4 5.0 x 80 10 x 3 5.0 x 100 10 x 4 V5 Impact Driver Bits
480 350 250 350 100 65 55 100 45 5
Materials
Twin cut flooring screw Available in: Yellow
To BS
EN ISO
14592:2
008
Designed for use in man made boards such as MDF and chipboard. The C2 twin-cuts ensure a rapid pickup and reduces the likelihood of splitting whilst the steep head design with self countersinking ribs ensures a flush finish. The plain shank enables the screw to pull the two substrates together with out the need to manually clamp.
C2 FLOORING & MDF SCREW Double Countersunk with Ribs Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Tubs (T20 driver bit included) 42055C2MDF
10
4.2 x 55
8 x 21/4
250
C2 EXTERIOR & C2 TONGUE FIX
C2® EXTERIOR
TIMBER CONSTRUCTION SCREWS Materials
Twin cut exterior screw Available in:
Exterior
To BS
EN ISO
14592:2
008
The C2 Exterior screw has been plated with a multi-layer protection system that consists of an organic top coat barrier and a zinc base layer. Designed to provide excellent additional protection against corrosion in exterior applications.
C2 EXTERIOR SCREW
Double Countersunk with Ribs Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Tubs (V5 impact bit included) 40030C2S 40040C2S 40050C2S 40060C2S 40070C2S 50050C2S 50060C2S 50070C2S 50080C2S 50100C2S
4.0 X 30 4.0 X 40 4.0 X 50 4.0 X 60 4.0 X 70 5.0 X 50 5.0 X 60 5.0 X 70 5.0 X 80 5.0 X 100
8 x 11/4 8 x 11/2 8x2 8 x 21/2 8 x 23/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
400 350 300 200 170 180 150 120 110 80
C2® TONGUE-FIX
Materials
Twin cut flooring screw Available in: Yellow
To BS
EN ISO
14592:2
008
Specifically designed for attaching tongue and groove floorboards to flooring joists. The C2 Tongue-Fix gives a secure hidden fixture through the tongue without causing damage, allowing a flush fit with the next board.
C2 TONGUE-FIX SCREW Reduced Head Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Tubs (T10 driver bit included) 35045C2TG
3.5 x 45
6 x 13/4
350
11
CLASSIC MULTI-PURPOSE SCREWS
TIMBER CONSTRUCTION SCREWS
CLASSIC
Materials
Single cut multi-purpose screw Available in: Yellow
Zinc (CR3)
Nickel
Black Pass.
A2/Aust. SS
Specifically designed as a multi-purpose product, the 25° sharp point, the new type 17 slash, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.
CLASSIC -
Yellow
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.0 x 30 3.0 x 35 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60
4 x 1/2 4 x 5/8 4 x 3/4 4x1 4 x 11/4 4 x 13/8 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Boxes 30012CLAF 30016CLAF 30020CLAF 30025CLAF 30030CLAF 30035CLAF 30040CLAF 35012CLAF 35016CLAF 35020CLAF 35025CLAF 35030CLAF 35035CLAF 35040CLAF 35045CLAF 35050CLAF 40012CLAF 40016CLAF 40020CLAF 40025CLAF 40030CLAF 40035CLAF 40040CLAF 40045CLAF 40050CLAF 40055CLAF 40060CLAF
12
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
40070CLAF 40080CLAF 45016CLAF 45020CLAF 45025CLAF 45030CLAF 45035CLAF 45040CLAF 45045CLAF 45050CLAF 45055CLAF 45060CLAF 45070CLAF 45080CLAF 50020CLAF 50025CLAF 50030CLAF 50035CLAF 50040CLAF 50045CLAF 50050CLAF 50055CLAF 50060CLAF 50070CLAF 50075CLAF 50080CLAF 50090CLAF 50100CLAF 50120CLAF 60040CLAF 60045CLAF 60050CLAF 60060CLAF 60070CLAF 60080CLAF 60090CLAF 60100CLAF 60120CLAF 60130CLAF 60150CLAF 60180CLAF 60200CLAF
4.0 x 70 4.0 x 80 4.5 x 16 4.5 x 20 4.5 x 25 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45 4.5 x 50 4.5 x 55 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 40 6.0 x 45 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200
8 x 23/4 8x3 9 x 5/8 9 x 3/4 9x1 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4 9x2 9 x 23/8 9 x 21/2 9 x 23/4 9x3 10 x 3/4 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 23/8 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 10 x 43/4 12 x 11/2 12 x 13/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 200 200 200 200 200 200 100 100 100 100 100 100 100
CLASSIC MULTI-PURPOSE SCREWS CLASSIC PAN HEAD -
TIMBER CONSTRUCTION SCREWS
CLASSIC -
Yellow
Pan Head
Zinc (CR3)
Double Countersunk
The Classic multi-purpose screw with pan head for extra clamping.
The Classic multi-purpose screw plated in zinc.
Product Code
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 5.0 x 30 5.0 x 50
6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8x2 10 x 11/4 10 x 2
200 200 200 200 200 200 200 200 200 200 200 200 200
Boxes
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 X 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 70 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 70 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 70 6.0 x 80 6.0 x 100
4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8X1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2 8 x 23/4 9 x 11/4 9 x 11/2 9x2 9 x 23/4 10 x 1 10 x 11/4 10 x 13/8 10 x 1 1/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 23/4 12 x 3 12 x 4
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 100
Boxes
35012CLAP 35016CLAP 35020CLAP 35025CLAP 40016CLAP 40020CLAP 40025CLAP 40030CLAP 40035CLAP 40040CLAP 40050CLAP 50030CLAP 50050CLAP
CLASSIC HINGE SCREW -
Yellow
Nickel
Classic multi-purpose screw with a reduced 5mm head for specific use in continuous/piano hinges.
CLASSIC HINGE SCREW -
Yellow
5mm Reduced Head
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25
4 x 1/2 4 x 5/8 4 x 3/4 4x1
200 200 200 200
Boxes 30012CLAH 30016CLAH 30020CLAH 30025CLAH
CLASSIC HINGE SCREW 5mm Reduced Head
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20
4 x 1/2 4 x 5/8 4 x 3/4
200 200 200
Nickel
30012CLAZ 30016CLAZ 30020CLAZ 30025CLAZ 35012CLAZ 35016CLAZ 35020CLAZ 35025CLAZ 35030CLAZ 35035CLAZ 35040CLAZ 35050CLAZ 40016CLAZ 40020CLAZ 40025CLAZ 40030CLAZ 40035CLAZ 40040CLAZ 40045CLAZ 40050CLAZ 40055CLAZ 40060CLAZ 40070CLAZ 45030CLAZ 45040CLAZ 45050CLAZ 45070CLAZ 50025CLAZ 50030CLAZ 50035CLAZ 50040CLAZ 50050CLAZ 50060CLAZ 50070CLAZ 50080CLAZ 50090CLAZ 50100CLAZ 60040CLAZ 60050CLAZ 60070CLAZ 60080CLAZ 60100CLAZ
Boxes 30012CLAHN 30016CLAHN 30020CLAHN
13
CLASSIC MULTI-PURPOSE SCREWS
TIMBER CONSTRUCTION SCREWS
CLASSIC -
A2/Aust. SS
Product Code
Double Countersunk
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
30 25 20 15 14 10 8 7 6 4
Packs
The Classic multi-purpose screw in stainless steel for added corrosion resistance. Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 25 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 100 6.0 x 130 6.0 x 150
4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 3/8 6 x 1 1/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8 x 1 3/4 8x2 8 x 2 1/2 8 x 2 3/4 9 x 5/8 9 x 1 1/4 9 x 1 1/2 9x2 9 x 2 1/2 10 x 1 10 x 1 1/4 10 x 1 3/8 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 3 1/2 10 x 4 12 x 1 1/2 12 x 2 12 x 2 1/2 12 x 2 3/4 12 x 3 12 x 4 12 x 5 12 x 6
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100
Boxes 30012CLASS 30016CLASS 30020CLASS 30025CLASS 35012CLASS 35016CLASS 35020CLASS 35025CLASS 35030CLASS 35035CLASS 35040CLASS 35050CLASS 40016CLASS 40020CLASS 40025CLASS 40030CLASS 40035CLASS 40040CLASS 40045CLASS 40050CLASS 40060CLASS 40070CLASS 45025CLASS 45030CLASS 45040CLASS 45050CLASS 45060CLASS 50025CLASS 50030CLASS 50035CLASS 50040CLASS 50050CLASS 50060CLASS 50070CLASS 50080CLASS 50090CLASS 50100CLASS 60040CLASS 60050CLASS 60060CLASS 60070CLASS 60080CLASS 60100CLASS 60130CLASS 60150CLASS
14
35030CHSSP 40025CHSSP 40030CHSSP 40040CHSSP 40050CHSSP 50050CHSSP 50060CHSSP 50070CHSSP 50080CHSSP 50100CHSSP
CLASSIC -
Black Pass.
Double Countersunk
The Classic multi-purpose screw in black passivated. Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 16 3.5 x 25 4.0 x 25 4.0 x 30 4.0 x 40 4.5 x 30 5.0 x 30 5.0 x 40
6 x 5/8 6x1 8x1 8 x 11/4 8 x 11/2 9 x 11/4 10 x 11/4 10 x 11/2
200 200 200 200 200 200 200 200
Boxes 35016CLAB 35025CLAB 40025CLAB 40030CLAB 40040CLAB 45030CLAB 50030CLAB 50040CLAB
SOLO WOODSCREWS
TIMBER CONSTRUCTION SCREWS
SOLO
Materials
Single threaded woodscrew Available in:
Yellow
Zinc (CR3)
To BS
EN ISO
14592:2
008
A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with a plastic plug.
SOLO -
Yellow
Double Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 25 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 11/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
2,000 1,800 1,700 1,250 1,000 800 800 525 400 375 325 250
3.0 x 12 3.0 x 15 3.0 x 17 3.0 x 20 3.0 x 25 3.0 x 30 3.5 x 12 3.5 x 15 3.5 x 17 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 17 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 20 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45
4 x 1/2 4 x 5/8 4 x 43/64 4 x 3/4 4x1 4 x 11/4 6 x 1/2 6 x 5/8 6 x 43/64 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 43/64 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 9 x 3/4 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Tubs 35025STUBY 35030STUBY 40025STUBY 40030STUBY 40040STUBY 40050STUBY 50040STUBY 50050STUBY 50060STUBY 50070STUBY 50080STUBY 50100STUBY
Boxes 30012SOLOC 30015SOLOC 30017SOLOC 30020SOLOC 30025SOLOC 30030SOLOC 35012SOLOC 35015SOLOC 35017SOLOC 35020SOLOC 35025SOLOC 35030SOLOC 35035SOLOC 35040SOLOC 35050SOLOC 40015SOLOC 40017SOLOC 40020SOLOC 40025SOLOC 40030SOLOC 40035SOLOC 40040SOLOC 40045SOLOC 40050SOLOC 40060SOLOC 40070SOLOC 45020SOLOC 45030SOLOC 45035SOLOC 45040SOLOC 45045SOLOC
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
45050SOLOC 45060SOLOC 45070SOLOC 45080SOLOC 50025SOLOC 50030SOLOC 50035SOLOC 50040SOLOC 50045SOLOC 50050SOLOC 50060SOLOC 50070SOLOC 50075SOLOC 50080SOLOC 50090SOLOC 50100SOLOC 60040SOLOC 60050SOLOC 60060SOLOC 60070SOLOC 60080SOLOC 60090SOLOC 60100SOLOC 60120SOLOC 60130SOLOC 60150SOLOC
4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150
9x2 9 x 21/2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6
200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100 100 100
3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150
6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6
750 500 470 430 380 350 280 230 230 180 160 140 120 90 90 50 35
Bags 35015CHYB 35030CHYB 40025CHYB 40030CHYB 40035CHYB 40040CHYB 40050CHYB 40060CHYB 50040CHYB 50050CHYB 50060CHYB 50070CHYB 50080CHYB 50100CHYB 60080CHYB 60120CHYB 60150CHYB
15
SOLO WOODSCREWS
TIMBER CONSTRUCTION SCREWS
SOLO -
Yellow
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150
6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6
45 35 30 25 22 20 16 12 10 12 10 8 6 4 4 2 2
Packs 35015CHYP 35030CHYP 40025CHYP 40030CHYP 40035CHYP 40040CHYP 40050CHYP 40060CHYP 50040CHYP 50050CHYP 50060CHYP 50070CHYP 50080CHYP 50100CHYP 60080CHYP 60120CHYP 60150CHYP
SOLO -
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
40050SOLOZ 40060SOLOZ 40070SOLOZ 40080SOLOZ 45040SOLOZ 45050SOLOZ 45060SOLOZ 45070SOLOZ 45080SOLOZ 50025SOLOZ 50030SOLOZ 50040SOLOZ 50045SOLOZ 50050SOLOZ 50060SOLOZ 50070SOLOZ 50080SOLOZ 50090SOLOZ 50100SOLOZ 60050SOLOZ 60060SOLOZ 60080SOLOZ 60100SOLOZ 60120SOLOZ 60150SOLOZ
4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 50 6.0 x 60 6.0 x 80 6.0 x 100 6.0 x 120 6.0 x 150
8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 2 12 x 21/2 12 x 3 12 x 43/4 12 x 51/8 12 x 6
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 100 100 100
SOLO SQUARE RECESS -
Zinc
Double Countersunk
Zinc (CR3)
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Product Code Qty
Tubs 40030STUBZ 40040STUBZ 40050STUBZ 50050STUBZ 50060STUBZ 50070STUBZ 50080STUBZ 50100STUBZ
4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
1,250 1,000 800 525 400 375 325 250
3.0 x 12 3.0 x 15 3.5 x 15 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45
4 x 1/2 4 x 5/8 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
16
Size (Imp. equiv.)
Qty
4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40 5.0 x 50 5.0 x 80
8 x 3/4 8x1 8 x 11/2 10 x 11/2 10 x 2 10 x 3
200 200 200 200 200 200
Boxes 40020SQSZ 40025SQSZ 40040SQSZ 50040SQSZ 50050SQSZ 50080SQSZ
SOLO SQUARE RECESS -
Boxes 30012SOLOZ 30015SOLOZ 35015SOLOZ 35020SOLOZ 35025SOLOZ 35030SOLOZ 35035SOLOZ 35040SOLOZ 35050SOLOZ 40015SOLOZ 40020SOLOZ 40025SOLOZ 40030SOLOZ 40035SOLOZ 40040SOLOZ 40045SOLOZ
Size (Metric)
Pan Head
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40
8 x 3/4 8x1 8 x 11/2 10 x 11/2
200 200 200 200
Boxes 40020SQPSZ 40025SQPSZ 40040SQPSZ 50040SQPSZ
Zinc
TWIN-THREADED WOODSCREWS
TIMBER CONSTRUCTION SCREWS
TWIN-THREADED
Materials
Woodscrew
Available in: Zinc (CR3) To BS
EN ISO
14592:2
008
A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.
TWIN-THREADED Double Countersunk Product Code
Size (Imp.)
Size (Metric)
Qty
4 x 1/2 4 x 5/8 4 x 3/4 4x1 5 x 5/8 5 x 3/4 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 1/2 6 x 1 3/4 6x2 7 x 5/8 7 x 3/4 7x1 7 x 11/4 7 x 11/2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2 8 x 21/4 8 x 21/2 8x3 8x3 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/4 10 x 21/2 10 x 3 10 x 3 10 x 31/2
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.3 x 16 3.3 x 19 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 45 3.5 x 50 3.9 x 16 3.9 x 20 3.9 x 25 3.9 x 30 3.9 x 40 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 75 4.0 x 75 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 75 5.0 x 75 5.0 x 90
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 200 200 200 200 200 200 100 100
Boxes 00412CWZ 00458CWZ 00434CWZ 00041CWZ 00558CWZ 00534CWZ 00612CWZ 00658CWZ 00634CWZ 00061CWZ 06114CWZ 06112CWZ 06134CWZ 00062CWZ 00758CWZ 00734CWZ 00071CWZ 07114CWZ 07112CWZ 00812CWZ 00858CWZ 00834CWZ 00081CWZ 08114CWZ 08112CWZ 08134CWZ 00082CWZ 08214CWZ 08212CWZ 00083CWZ 00083CWZ100 01034CWZ 00101CWZ 10114CWZ 10112CWZ 10134CWZ 00102CWZ 10214CWZ 10212CWZ 00103CWZ 00103CWZ100 10312CWZ
Product Code 00104CWZ 00121CWZ 12114CWZ 12112CWZ 00122CWZ 12212CWZ 00123CWZ 00123CWZ100 12312CWZ 00124CWZ
Size (Imp.)
Size (Metric)
Qty
10 x 4 12 x 1 12 x 11/4 12 x 11/2 12 x 2 12 x 21/2 12 x 3 12 x 3 12 x 31/2 12 x 4
5.0 x 100 6.0 x 25 6.0 x 30 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 75 6.0 x 75 6.0 x 90 6.0 x 100
100 200 200 200 200 200 200 100 100 100
6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3 10 x 4
3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80 5.0 x 100
700 620 500 540 470 390 350 270 200 180 250 190 160 140 90
6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3 10 x 4
3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80 5.0 x 100
45 40 35 35 30 25 20 16 12 10 15 12 10 8 6
Bags 00658CWZB 00634CWZB 00061CWZB 00834CWZB 00081CWZB 08114CWZB 08112CWZB 00082CWZB 08212CWZB 00083CWZB 10112CWZB 00102CWZB 10212CWZB 00103CWZB 00104CWZB
Packs 00658CWZP 00634CWZP 00061CWZP 00834CWZP 00081CWZP 08114CWZP 08112CWZP 00082CWZP 08212CWZP 00083CWZP 10112CWZP 00102CWZP 10212CWZP 00103CWZP 00104CWZP
17
TWIN-THREADED & BLACKJAX SCREWS
TIMBER CONSTRUCTION SCREWS
ROUNDHEAD TWIN-THREADED
Materials
Woodscrew
Available in: Zinc (CR3)
To BS
EN ISO
14592:2
008
A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.
TWIN-THREADED Roundhead Product Code
Size (Imp.)
Size (Metric)
Qty
Product Code
4 x 1/2 4 x 5/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 8 x 1/2 8 x 5/8 8 x 3/4 8x1
3.0 x 12 3.0 x 16 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25
200 200 200 200 200 200 200 200 200 200 200
08114CRWZ 08112CRWZ 00082CRWZ 00101CRWZ 10114CRWZ 10112CRWZ 00102CRWZ 10212CRWZ 00103CRWZ 12112CRWZ 00122CRWZ
Boxes
Size (Imp.)
Size (Metric)
Qty
8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2 10 x 21/2 10 x 3 12 x 11/2 12 x 2
4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 75 6.0 x 40 6.0 x 50
200 200 200 200 200 200 200 200 200 200 200
Boxes
00412CRWZ 00458CRWZ 00612CRWZ 00658CRWZ 00634CRWZ 00061CRWZ 06114CRWZ 00812CRWZ 00858CRWZ 00834CRWZ 00081CRWZ
BLACKJAX
Materials
Roundhead woodscrew Available in: Black Phos.
To BS
EN ISO
14592:2
008
A twin-threaded wood screw with a black japanned finish designed to be used with black ironmongery.
BLACKJAX Roundhead Product Code
Size (Imp.)
Size (Metric)
Qty
6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2
3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50
200 200 200 200 200 200 200 200 200 200 200 200 200
Boxes 00658BJC 00634BJC 00061BJC 00858BJC 00834BJC 00081BJC 08114BJC 08112BJC 00082BJC 00101BJC 10114BJC 10112BJC 00102BJC
18
Product Code
Size (Imp.)
Size (Metric)
Qty
6x1 8x1 8 x 1 1/2 10 x 1 1/2
3.5 x 25 4.0 x 25 4.0 x 40 5.0 x 40
45 40 35 35
Packs 00061BJCP 00081BJCP 08112BJCP 10112BJCP
CARCASS, MIRROR SCREWS & CAPS
TIMBER CONSTRUCTION SCREWS
CARCASS SCREWS
Materials
Woodscrew
Available in: Black Phos.
Designed for construction of furniture carcasses.
CARCASS SCREWS Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.0 x 33 4.0 x 45
7 x 11/4 7 x 13/4
500 500
Boxes 40033CARC 40045CARC
MIRROR SCREWS
PLASTIDOME SCREW CAPS
Dome head
Two piece cap and washer which provides a decorative finish and a protective cap.
For hanging a mirror where an aesthetic finish is required. Product Code
Screw Size (Imp.)
Finish
Qty
Packs 08114CMIRP 08112CMIRP
8 x 11/4 8 x 11/2
Chrome Chrome
10 8
8x1 8 x 11/4 8 x 11/2 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2
Chrome Chrome Chrome Polished Brass Polished Brass Polished Brass Polished Brass Polished Brass
200 200 200 200 200 200 200 200
Boxes 00081CMIR200 08114CMIR200 08112CMIR200 00834BMIR200 00081BMIR200 08114BMIR200 08112BMIR200 00082BMIR200
HINGED COVER CAPS
Finish
Qty
3.5 - 4.2 3.5 - 4.2 3.5 - 4.2 3.5 - 4.2
White Chrome Brown Black
100 100 100 100
SCREW CUPS A surface screw cup designed to allow the head of the screw to sit proud giving a decorative finish.
To Fit (mm)
Finish
Qty
6 8 10 6 8 10
Brass Brass Brass Nickel Nickel Nickel
60 55 50 60 55 50
Packs
To Fit (mm)
Colour
Qty
3.5 - 5 3.5 - 5 5 - 10 5 - 10
White Black White Black
100 100 50 50
Bags SHCCWHITEP SHCCBLACKP LHCCWHITEP LHCCBLACKP
To Fit (mm)
Bags WHITEPLAST CHROMEPLAST BROWNPLAST BLACKPLAST
Product Code
For cosmetic use to conceal screws. Product Code
Product Code
6BCUPP 8BCUPP 10BCUPP 6NCUPP 8NCUPP 10NCUPP
19
MIXED TRAYS & MIXED PACKS
TIMBER CONSTRUCTION SCREWS
MIXED TRAYS - ASSORTED SIZES Classic / Twin-Threaded / Self-Tapping
Product Code CLASSIC TRAY STST TRAY WOOD TRAY STS TRAY
895
Qty
Classic Yellow Classic A2 Stainless Steel Zinc Twin-Threaded Zinc Self-Tapper
895 895 1,140 1,305
895
pcs
1140
pcs
Classic® A2 SS
3.5 x 16mm
4.0 x 40mm
3.5 x 16mm
4.0 x 40mm
8 x 11/4
6 x 1/2
200 pcs
70 pcs
200 pcs
70 pcs
85 pcs
180 pcs
3.5 x 25mm
4.0 x 50mm
3.5 x 25mm
4.0 x 50mm
6 x 3/4
8 x 11/2
100 pcs
60 pcs
100 pcs
60 pcs
130 pcs
65 pcs
3.5 x 30mm
4.0 x 60mm
3.5 x 30mm
4.0 x 60mm
100 pcs
50 pcs
100 pcs
50 pcs
4.0 x 20mm
5.0 x 40mm
4.0 x 20mm
5.0 x 40mm
30 pcs
100 pcs
30 pcs
4.0 x 25mm
5.0 x 50mm
4.0 x 25mm
5.0 x 50mm
10 x 21/2
6 x 1/2
60 pcs
40 pcs
60 pcs
40 pcs
35 pcs
190 pcs
4.0 x 30mm
5.0 x 60mm
4.0 x 30mm
5.0 x 60mm
8x1
8x2
50 pcs
35 pcs
50 pcs
35 pcs
60 pcs
50 pcs
A boxed assortment of popular sizes sold together for your convenience.
1400 psc
pcs
Twin-Threaded
MIXED PACKS - ASSORTED SIZES
Classic® Yellow
1305
pcs
Classic® Yellow
100 pcs
20
Description
Solo Yellow
Self-Tapping
10 x 2
6x1
35 pcs
100 pcs
8 x 3/4
100 pcs
8 x 1/2
8 x 1/2
180 pcs
100 pcs 8x1
6 x 1/4
50 pcs
100 pcs
10 x 1/2
120 pcs
6 x 11/4
8 x 11/2
110 pcs
45 pcs
8x1
80 pcs
8 x 3/4
6 x 3/4
115 pcs
140 pcs
6 x 1/2
8 x 3/4
165 pcs
140 pcs
Product Code
Description
Qty
CLAFMP SOLOMP CWZMP
Classic Multi-Purpose Screws Solo Chipboard Screws Twin-Threaded Woodscrews
1,400 1,400 1,400
1400
10 x 5/8
70 pcs
psc
Twin-Threaded
1400 psc
Size (Metric)
Qty
Size (Metric)
Qty
Size (Imperial)
Qty
3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
200 200 200 200 200 100 100 100 100
3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
200 200 200 200 200 100 100 100 100
8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 10 x 11/2 10 x 2 10 x 3 10 x 4
200 200 200 200 200 100 100 100 100
DECKING SCREWS
TIMBER CONSTRUCTION SCREWS
DECKING SCREWS
Materials
For decking platforms Available in:
C2 DECKING SCREW -
Exterior
To BS
A2/Aust. SS
EN ISO
14592:2
008
Exterior
Double Countersunk
A premium decking screw using the C2 twin cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1000 hrs in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 65
9x2 9 x 21/2 9 x 27/8 9 x 21/2
250 250 250 1000
Tubs 50C2D250 65C2D250 75C2D250 65C2D1000
CLASSIC DECKING SCREW A2/Aust. SS
SOLO DECKING SCREW
- Double Countersunk
Exterior
- Double Countersunk
Used for attaching decking board to a timber substrate. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.
An economic but highly effective softwood decking screw. Plated to withstand up to 500 hrs in a salt spray cabinet and designed to give a rapid installation and a secure fixing.
Product Code
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.5 x 50 4.5 x 65
9x2 9 x 21/2
250 250
Tubs 50DEXSS250 65DEXSS250
Size (Metric)
Size (Imp. equiv.)
Qty
4.5 x 50 4.5 x 60 4.5 x 70
9x2 9 x 21/2 9 x 23/4
200 200 200
4.5 x 60
9 x 21/2
1000
Boxes 50SOLOD200 60SOLOD200 70SOLOD200
Tubs 60SOLOD1000
21
IN-DEX TIMBER SCREWS
TIMBER CONSTRUCTION SCREWS
IN-DEX TIMBER SCREWS For timber constructions Available in:
Exterior
A4 SS
To BS
A2/Aust. SS
EN ISO
14592:2
008
Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications. Also available with a wafer head for improved clamping or a low profile finish.
HEX HEAD -
WAFER HEAD -
Exterior
8mm Hex Head
Size
Product Code
T30/T40 Recess
A/F
Qty
6.7 x 60 6.7 x 75 6.7 x 87 6.7 x 100 6.7 x 125 6.7 x 150 6.7 x 200 6.7 x 250
8 8 8 8 8 8 8 8
50 50 50 50 50 50 50 50
6.7 x 100 6.7 x 150 6.7 x 200
8 8 8
50 30 20
(Metric)
Exterior
Boxes
Size
Product Code
(Metric)
Bit Type
Qty
Boxes (T30 & T40 bit included)
60IN 75IN 87IN 100IN 125IN 150IN 200IN 250IN
Bags 100INDEXTB 150INDEXTB 200INDEXTB
Packs 100INDEXP 150INDEXP
6.7 x 100 6.7 x 150
HEX HEAD -
8 8
6 4
95INW 125INW 150INW 175INW 200INW 225INW 250INW 275INW 300INW 350INW 400INW
6.7 x 95 6.7 x 125 6.7 x 150 6.7 x 175
8mm Hex Head
50 50 50 50
50 50 50 25 25 25 25
6.7 x 95 6.7 x 125 6.7 x 150
T30 T30 T30
50 30 20
6.7 x 95 6.7 x 125 6.7 x 150
T30 T30 T30
6 5 4
Bags 95INDEXWB 125INDEXWB 150INDEXWB
Packs 95INDEXWP 125INDEXWP 150INDEXWP
A4 SS
8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300 8.0 x 350 8.0 x 400
T30 T30 T30 T30 T40 T40 T40 T40 T40 T40 T40
WAFER HEAD -
A2/Aust. SS
T40 Recess Product Code
Size (Metric)
A/F
Qty
8 8 8 8
25 25 25 25
Telescopic Tubes 75INDEXSST 100INDEXSST 125INDEXSST 150INDEXSST
6.7 x 75 6.7 x 100 6.7 x 125 6.7 x 150
Product Code
Bit Type
Qty
T40
25
Boxes (Driver Bit Included) 80INDEXWSS
22
Size (Metric)
8.0 x 80
IN-DEX SCREWS & CARRIAGE BOLTS
TIMBER CONSTRUCTION SCREWS
HEAVY DUTY TIMBER SCREWS For heavy duty timber constructions Available in:
To BS
Exterior
EN ISO
14592:2
008
The heavy duty in-dex screw dramatically decreases installation time as it doesn’t require a pilot hole into most wood types and can be installed with a power tool. Coated with patented multi-layer corrosion resistant plating to achieve 1,000 hours salt spray test. This screw is ideal for outdoor applications or where extra strength is required.
HEX HEAD -
Exterior
10mm Hex Head Product Code
Size (Metric)
A/F
Qty
10 10 10 10 13 13 13
10 10 10 10 10 10 10
Bags (Socket driver Included) 875INH 8100INH 8150INH 8200INH 10100INH 10150INH 10200INH
8.0 x 75 8.0 x 100 8.0 x 150 8.0 x 200 10.0 x 100 10.0 x 150 10.0 x 200
COACH SCREWS
CARRIAGE BOLTS
Exterior woodscrew Available in:
Exterior bolt & nut
Exterior
Available in: To BS
EN ISO
Exterior To BS
14592:2
008
A traditional way of fastening timber applications, but has the added advantage of a corrosion resistant plating finish for external applications. Product Code
Size (Metric)
A/F
Qty
10 10 10 13 13 13 13 17 17 17
10 10 10 10 10 10 10 10 10 10
Bags 640INCSB 650INCSB 675INCSB 850INCSB 875INCSB 8100INCSB 8120INCSB 10100INCSB 10130INCSB 10150INCSB
EN ISO
14592:2
008
A heavy duty bolt used for fastening timbers. It has an impact resistant dome head and the square under the head locks into the timber to stop the bolt from spinning. Product Code
Size (Metric)
A/F
Qty
Bags 6 x 40 6 x 50 6 x 75 8 x 50 8 x 75 8 x 100 8 x 120 10 x 100 10 x 130 10 x 150
10100INCB 10150INCB 10160INCB 10200INCB 10220INCB
10 x 100 10 x 150 10 x 160 10 x 200 10 x 220
17 17 17 17 17
10 10 10 10 10
23
COACH SCREWS & NYLON PLUGS
TIMBER CONSTRUCTION SCREWS
COACH SCREWS
Materials *
Used in wood & brick (with nylon plugs) Available in:
Zinc (CR3)
To BS
EN ISO
14592:2
008
A traditional heavy duty woodscrew used for timber to timber applications, attaching ironmongery to timber and into masonry with a nylon plug. Product Code
Thread x Length
A/F
(mm)
(mm)
Qty
Boxes 0625CSC 0630CSC 0640CSC 0650CSC 0660CSC 0670CSC 0675CSC 0680CSC 06100CSC 0830CSC 0840CSC 0850CSC 0860CSC 0865CSC 0870CSC 0875CSC 0880CSC 0890CSC 08100CSC 08120CSC 08150CSC 1040CSC 1050CSC 1060CSC 1070CSC 1075CSC 1080CSC 10100CSC 10120CSC 10130CSC 10150CSC 10160CSC 10200CSC 1250CSC 1275CSC 1280CSC 12100CSC 12150CSC
6 x 25 6 x 30 6 x 40 6 x 50 6 x 60 6 x 70 6 x 75 6 x 80 6 x 100 8 x 30 8 x 40 8 x 50 8 x 60 8 x 65 8 x 70 8 x 75 8 x 80 8 x 90 8 x 100 8 x 120 8 x 150 10 x 40 10 x 50 10 x 60 10 x 70 10 x 75 10 x 80 10 x 100 10 x 120 10 x 130 10 x 150 10 x 160 10 x 200 12 x 50 12 x 75 12 x 80 12 x 100 12 x 150
10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 19 19 19 19 19
250 250 200 200 200 200 100 100 200 200 200 100 100 100 100 100 100 50 50 50 50 100 100 100 100 100 50 50 50 50 25 25 20 100 50 25 25 25
6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 100 10 x 120 10 x 130
10 10 10 13 13 13 13 17 17 17 17 17
120 100 70 75 65 48 40 45 30 35 24 23
Bags 0650CSCB 0670CSCB 06100CSCB 0850CSCB 0860CSCB 0880CSCB 08100CSCB 1050CSCB 1080CSCB 10100CSCB 10120CSCB 10130CSCB
24
Product Code 10150CSCB 1280CSCB 12100CSCB 12150CSCB
Thread x Length
A/F
(mm)
(mm)
10 x 150 12 x 80 12 x 100 12 x 150
17 19 19 19
18 25 20 12
6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 150 12 x 75
10 10 10 13 13 13 13 17 17 17 19
10 10 10 5 5 5 5 4 4 2 2
Qty
Packs 0650CSCP 0670CSCP 06100CSCP 0850CSCP 0860CSCP 0880CSCP 08100CSCP 1050CSCP 1080CSCP 10150CSCP 1275CSCP
COACH SCREWS & NYLON PLUGS
Used In Brick *
Product Code
Thread x Length
A/F
(mm)
(mm)
6 x 60 6 x 80 8 x 100
10 10 13
40 30 12
6 x 60 6 x 80 8 x 100
10 10 13
2 2 2
Qty
Bags 0660CSCNB 0680CSCNB 08100CSCNB
Packs 0660CSCNP 0680CSCNP 08100CSCNP
NYLON PLUGS Product Code
Drill Hole 0
Length (mm)
Qty
10 10 12
30 40 50
200 100 70
10 10 12
30 40 50
20 10 5
Bags 06NLPB 08NLPB 10NLPB
Packs 06NLPP 08NLPP 10NLPP
DRY LINING CONSTRUCTION SCREWS 26 - DRYWALL SCREWS 28 - COLLATED SCREWS
DRYWALL SCREWS
DRY LINING CONSTRUCTION SCREWS
DRYWALL SCREWS
Coarse, fine and reverse thread available Available in: Black Phos.
Zinc (CR3)
Yellow
To BS
EN ISO
14592:
2008
Phillips Bugle Head drywall screws have a bugle head to prevent damage or tearing of the plasterboard.
COARSE THREAD -
FINE THREAD -
Black Phos.
For board to timber
Used to secure plasterboard to timber stud work.
Used to secure plasterboard to drywall track and ceiling track systems (Max 0.7mm)
Product Code
Product Code
Size (Metric)
Qty
3.5 x 32 3.5 x 38
2,000 1,500
00032DRYT 00038DRYT
3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 4.2 x 65 4.2 x 75 4.8 x 100
1,000 1,000 1,000 1,000 1,000 1,000 500 500 500
3.5 x 32 3.5 x 38 3.5 x 50
400 350 250
00025DRY 00032DRY 00038DRY 00042DRY 00045DRY 00050DRY 00055DRY 00060DRY 00065DRY 00075DRY 00090DRY 00100DRY
Tubs
Size (Metric)
Qty
3.5 x 32 3.5 x 38
2,000 1,500
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100
1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 100
200 200 200 200 200 200 200 200 200 200
3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 60 4.2 x 75 4.2 x 90
400 350 320 250 200 130 70
Tubs
00032DRYCT 00038DRYCT
Boxes
Boxes
00025DRYC 00032DRYC 00035DRYC 00038DRYC 00042DRYC 00050DRYC 00065DRYC 00075DRYC 00100DRYC
Bags 00032DRYCB 00038DRYCB 00050DRYCB
COARSE THREAD -
Yellow
For board to timber
Used to secure plasterboard to timber stud work. Product Code
Size (Metric)
Qty
4.8 x 125 4.8 x 150
100 100
Boxes 00125DRYCY 00150DRYCY
26
Black Phos.
For board to light steel
Boxes of 200’s 00025DRYS 00032DRYS 00038DRYS 00042DRYS 00045DRYS 00050DRYS 00060DRYS 00065DRYS 00075DRYS 00100DRYS
Bags 00032DRYB 00038DRYB 00042DRYB 00050DRYB 00060DRYB 00075DRYB 00090DRYB
DRYWALL SCREWS FINE THREAD -
DRY LINING CONSTRUCTION SCREWS
REVERSE THREAD -
Zinc (CR3)
For board to steel (0.9mm)
Used to secure plasterboard to drywall track and ceiling track systems (Max 0.7mm) Product Code
Size (Metric)
Qty
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100 4.8 x 125 4.8 x 150
1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 100 100
Boxes 00025DRYZ 00032DRYZ 00038DRYZ 00042DRYZ 00045DRYZ 00050DRYZ 00055DRYZ 00060DRYZ 00065DRYZ 00075DRYZ 00090DRYZ 00100DRYZ 00125DRYZ 00150DRYZ
SELF-DRILL -
Product Code
Product Code
Qty
00025PSDD 00032PSDD 00038PSDD 00042PSDD 00050PSDD 00055PSDD 00065PSDD 00075PSDD 00100PSDD 00125PSDD
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55 3.9 x 65 4.2 x 75 4.8 x 100 4.8 x 125
1,000 1,000 1,000 1,000 1,000 500 500 500 500 100
3.5 x 32 3.5 x 42
400 320
Bags 00032PSDDB 00042PSDDB
3.9 x 25 3.9 x 38 3.9 x 42
1,000 1,000 1,000
Black Phos.
For dense board to timber
Product Code
Size (Metric)
Qty
3.9 x 30 3.9 x 45 3.9 x 55
1,000 1,000 1,000
Boxes 00030DRYD 00045DRYD 00055DRYD
SHARP POINT WAFER HEAD -
Zinc (CR3)
(Max Drill Thickness: 0.9mm) Product Code
Size (Metric)
Qty
4.2 x 13
1,000
Boxes 08916WHSP
Boxes
Qty
DENSE BOARD -
Zinc (CR3)
Size (Metric)
Size (Metric)
Boxes 00025DRYR 00038DRYR 00042DRYR
For board to steel (2.5mm)
Used to secure plasterboard to drywall track and ceiling track systems (Max 2.5-3.0mm)
Black Phos.
For dense board to steel (0.9mm)
SELF-DRILL WAFER HEAD -
Zinc (CR3)
(Max Drill Thickness: 2.5mm) Product Code
Size (Metric)
Qty
4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25
1,000 1,000 1,000 1,000
Boxes 08916WHSD 00016WHSD 00019WHSD 00025WHSD
27
DRY LINING CONSTRUCTION SCREWS
COLLATED SCREWS
COLLATED SCREWS A variety of collated fasteners to suit multiple applications. Available in:
COARSE THREAD -
Black Pass.
Zinc (CR3)
Yellow
Product Code
Size (Metric)
Qty
3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 55
1,000 1,000 1,000 800
3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 50 3.5 x 55 4.2 x 65 4.2 x 75
1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500
Tubs 00035CDRYTUB 00038CDRYTUB 00045CDRYTUB 00055CDRYTUB
To BS
EN ISO
14592:
2008
Zinc (CR3)
For board to steel (2.5mm)
Product Code
Size (Metric)
Qty
3.5 x 35 3.5 x 45 3.5 x 50
1,000 1,000 1,000
Boxes 00035COLLSD 00045COLLSD 00050COLLSD
SELF-DRILLING WING TIP - Exterior
Boxes 00025COLDYS 00032COLDYS 00035COLDYS 00038COLDYS 00045COLDYS 00050COLDYS 00055COLDYS 00065COLDYS 00075COLDYS
Exterior
SELF-DRILL -
Black Pass.
For board to timber
Used to secure plasterboard to timber stud work.
A2/Aust. SS
Zinc (CR3)
For light section steel
Size
Product Code
(Metric)
Plating
Qty
Exterior Zinc
1,000 1,000
Boxes 00044COLLW 4865COLLW
4.8 x 44 4.8 x 65
FLOORING SCREW Flooring to timber joists
FINE THREAD -
Zinc (CR3)
For board to steel (0.9mm)
Product Code
Size (Metric)
Qty
4.2 x 55
1,000
Boxes 00055COLLF
Used to secure plasterboard to drywall track and ceiling track systems (Max 0.9mm) Product Code
Size (Metric)
Qty
3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55
1,000 1,000 1,000 1,000 1,000 1,000 1,.000
CLASSIC -
A2/Aust. SS
Timber to timber
Boxes 00025COLDZYS 00032COLDZYS 00035COLDZYS 00038COLDZYS 00042COLDZYS 00050COLDZYS 00055COLDZYS
28
Product Code
Size (Metric)
Qty
4.0 x 40 4.0 x 50
1,000 1,000
Boxes 4040CLASSCOL 4050CLASSCOL
Yellow
METAL CONSTRUCTION SCREWS 30 - SELF-DRILLING SCREWS 31 - STITCHING SCREWS 32 - COMPOSITE PANEL SCREWS 32 - SLASH POINT SCREWS 33 - WING-TIP SCREWS 34 - COVER CAPS 34 - EPDM WASHERS
35 - SELA COVERS 35 - CORRUGATED SHEET FIXINGS 36 - METAL FRAMING SCREWS 37 - SELF-TAPPING SCREWS 38 - MACHINE SCREWS 39 - SOCKET SCREWS
SELF-DRILLING SCREWS
METAL CONSTRUCTION SCREWS
SELF-DRILLING SCREWS
For joining roofing sheet to section steel Available in:
Exterior
Zinc
Self-drilling hexagon head, for joining roofing sheets to light and heavy gauge steel. With or without EPDM washer. The exterior (Silver Ruspert) plating for a reliable and durable corrosion resistant coating which resists over 1,000 hours salt-spray.
FOR LIGHT SECTION STEEL 6*/8mm Head, Coarse Thread
Max Drilling Thickness 3-5mm
For joining roofing sheets to light gauge steel.
EXTERIOR SCREWS Product Code
Size
ZINC SCREWS -
Exterior
F Washer EPDM MCT
Qty
(mm)
(mm)
(mm)
(mm)
5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70 5.5 x 70 5.5 x 100 5.5 x 100
8 8 8 8 8 8 8 8 8 8 8 8
N/A 16 N/A 16 N/A 16 N/A 16 N/A 16 N/A 16
12 9 19 16 25 22 36 33 63 60 93 90
100 100 100 100 100 100 100 100 100 100 100 100
5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70
8 8 8 8 8 8 8 8 8
N/A 16 N/A 16 N/A 16 N/A 16 N/A
12 9 19 16 25 22 36 33 63
35 49 35 49 35 49 35 49 35
Boxes L25B L25W16B L32B L32W16B L38B L38W16B L50B L50W16B L70B L70W16B L100B L100W16B
F Washer EPDM MDT
(mm)
(mm)
(mm)
(mm)
4.2 x 13 4.2 x 19 4.8 x 13 4.8 x 16 4.8 x 19 5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 45
12 12 12 12 12 12 12 12 12 12
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
2.5 2.5 3 3 3 5 5 5 5 5
Qty
Boxes
Bags L25BB L25W16BB L32BB L32W16BB L38BB L38W16BB L50BB L50W16BB L70BB
Size
Product Code
Zinc (CR6)
MCT = Maximum clamping thickness.
00812HWSD* 00834HWSD* 01012HWSD 01058HWSD 01034HWSD 01234HWSD 00121HWSD 12114HWSD 12112HWSD 12134HWSD
1,000 1,000 1,000 1,000 1,000 500 500 500 500 500
MDT = Maximum drill thickness. Product Code
Size
F Washer EPDM
MCT
(mm)
(mm)
(mm)
(mm)
5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 50 5.5 x 60 5.5 x 70
11 11 11 11 11 11 11
16 16 16 16 16 16 16
6 12 19 25 37 47 57
Qty
Bags ZL19W16 ZL25W16 ZL32W16 ZL38W16 ZL50W16 ZL60W16 ZL70W16
35 49 35 49 35 49 35
MCT = Maximum clamping thickness.
30
SELF-DRILLING & STITCHING SCREWS
METAL CONSTRUCTION SCREWS
FOR HEAVY SECTION STEEL 8mm Head, Fine Thread
Used for attaching metal to heavy gauge steel (max 12mm) without the need to pre-drill a hole.
EXTERIOR SCREWS Product Code
Size
F Washer EPDM
ZINC SCREWS -
Exterior MCT
Max Drilling Thickness 12mm
Product Code
Qty
(mm)
(mm)
(mm)
(mm)
5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 55 5.5 x 55 5.5 x 65 5.5 x 80 5.5 x 100 5.5 x 100
12 12 12 12 12 12 12 12 12 12
N/A 16 N/A 16 N/A 16 16 16 N/A 16
16 13 18 15 35 32 42 57 80 77
100 100 100 100 100 100 100 100 100 100
H38W16BB 5.5 x 38
12
16
15
49
F Washer EPDM MCT
(mm)
(mm)
(mm)
(mm)
5.5 x 32 5.5 x 38 5.5 x 55 5.5 x 80
10.5 10.5 10.5 10.5
16 16 16 16
9 15 32 57
Qty
Bags
Boxes H32B H32W16B H38B H38W16B H55B H55W16B H65W16B H80W16B H100B H100W16B
Size
Zinc (CR6)
ZH32W16 ZH38W16 ZH55W16 ZH80W16
35 49 35 49
MCT = Maximum clamping thickness.
Bags MCT = Maximum clamping thickness.
STITCHING SCREWS For joining cladding sheets Available in:
Exterior
Zinc
Used for stitching sheet metal without the need to pre-drill a hole. Self-drilling point and tapered shank, with a washered hexagon head. The exterior (silver ruspert) plating for a reliable and durable corrosion resistant coating, which resists over 1,000 hours salt-spray.
STITCHING SCREWS 8mm Head, Coarse Thread
EXTERIOR SCREWS Product Code
Size
F Washer EPDM
ZINC SCREWS -
Exterior MCT
Qty
(mm)
(mm)
(mm)
(mm)
6.3 x 22 6.3 x 25
12 12
16 16
10 10
100 100
S25W16BB 6.3 x 25
12
16
10
22
Boxes S22W16B S25W16B
Product Code
Size (mm)
Max Drilling Thickness 1.7mm
Zinc (CR6)
F Washer EPDM MCT (mm)
(mm)
(mm)
13
16
10
Qty
Bags
Bags
ZS22W16 6.3 x 22
22
MCT = Maximum clamping thickness.
MCT = Maximum clamping thickness.
31
COMPOSITE PANEL & SLASH POINT
METAL CONSTRUCTION SCREWS
COMPOSITE PANEL ROOFING SCREWS For joining composite panel to light section steel Available in:
Exterior
Specifically designed to attach composite panel to light section steel. Self-drilling point with hexagon head.
COMPOSITE PANEL TO LIGHT SECTION STEEL 8mm Head, Coarse Thread 6.3 Ø
5.5 Ø
Size
Product Code
(mm)
EPDM (mm)
5.5/6.3 x 82 5.5/6.3 x 98 5.5/6.3 x 115 5.5/6.3 x 115
16 16 16 19
Min PT
Max PT Qty
(mm) (mm)
Boxes LH82W16B LH98W16B LH115W16B LH115W19B
32 48 65 65
63 78 95 95
100 100 100 100
Max Drilling Thickness 5mm
Min PT = Approximate minimum panel thickness Max PT = Approximate maximum panel thickness
SLASH POINT ROOFING SCREWS For joining sheet metal to wood Available in:
Exterior
Zinc
Designed to attach sheet metal (max 0.9mm) to timber. Hexagon head with slash point for easy pick up.
Max Drilling Thickness For Steel 0.9mm
SLASH POINT FOR TIMBER 8mm Head, Coarse Thread
EXTERIOR SCREWS Product Code
Size (mm)
ZINC SCREWS -
Exterior
F Washer EPDM MFT Qty (mm) (mm) (mm)
Boxes 12 12 12 12 12 12 12 12
16 16 19 16 19 16 16 16
0.9 5 5 17 17 37 57 110
100 100 100 100 100 100 100 100
12 12
16 16
0.9 5
45 45
Bags
32
Size (mm)
F Washer EPDM MFT Qty (mm) (mm) (mm)
Bags
DS32W16B 6.3 x 32 DS45W16B 6.3 x 45 DS45W19B 6.3 x 45 DS60W16B 6.3 x 60 DS60W19B 6.3 x 60 DS80W16B 6.3 x 80 DS100W16B 6.3 x 100 DS150W16B 6.3 x 150 DS32W16BB DS45W16BB
Product Code
Zinc (CR6)
6.3 x 32 6.3 x 45
ZDS25W16 6.3 x 25 ZDS32W16 6.3 x 32 ZDS45W16 6.3 x 45 ZDS60W16 6.3 x 60 ZDS90W16 6.3 x 80 ZDS100W16 6.3 x 100
13 13 13 13 13 13
16 16 19 16 19 16
0.9 0.9 5 17 37 57
MFT = Maximum fixture thickness.
100 100 100 100 100 100
WING TIP SELF-DRILLING SCREWS
METAL CONSTRUCTION SCREWS
WING TIP SELF-DRILLING SCREWS For joining wood to section steel Available in:
Zinc (CR6)
Exterior
Winged roofing screws, for fixing timber to light and heavy section steel. Countersunk head, winged with a self-drilling point. Light section steel thickness 5mm and heavy section steel thickness 12mm.
FOR LIGHT SECTION STEEL Coarse Thread
Max Drilling Thickness 5mm
Specifically designed to attach wood to metal (max 5mm)
EXTERIOR SCREWS Product Code
Exterior
Size
Max FT
(Metric)
(mm)
4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100
18 28 43 63 78
Qty
Boxes LW38S LW50S LW65S LW85S LW100S
NOTE: LW38B has a MDT of 4mm
ZINC SCREWS Product Code
Zinc (CR6)
Size
Max FT
(Metric)
(mm)
4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100 5.5 x 130 5.5 x 150
18 28 43 63 78 108 128
200 200 200 100 100 100 100
4.8 x 38 5.5 x 50 5.5 x 65
18 28 43
260 150 120
Qty
Boxes 200 200 200 100 100
Max FT = Maximum fixture thickness.
LW38B LW50B LW65B LW85B LW100B LW130B LW150B
Bags LW38BB LW50BB LW65BB
Max FT = Maximum fixture thickness.
FOR HEAVY SECTION STEEL Fine Metric Thread
Specifically designed to attach wood to metal (max 12mm)
ZINC SCREWS Product Code
Zinc (CR6)
Size
Max FT
(Metric)
(mm)
Qty Max Drilling Thickness 12mm
Boxes HW45B HW65B HW85B HW120B
5.5 x 45 5.5 x 65 5.5 x 85 5.5 x 120
13 29 49 84
200 200 100 100
Max FT = Maximum fixture thickness.
33
COVER CAPS & EPDM WASHERS
METAL CONSTRUCTION SCREWS
COVER CAPS AND EPDM WASHERS For sealing roofing and cladding screws
A selection of washers and cover caps for use with our range of roofing screws. Cover caps are a perfect way to blend in screws with coloured panels.
HEX HEAD COVER CAPS Bag Quantities of 1,000
Colour
Code (16mm)
Code (19mm)
1600E53CAP
1900E53CAP
1600E55CAP
1900E55CAP
1604C39CAP
1904C39CAP
1604D44CAP
1904D44CAP
1604E53CAP
1904E53CAP
Colour
Bags Black White Terracotta Petra Poppy Poppy Tangerine Beige Vandyke Brown Bamboo Goosewing Grey Mushroom Svelte Grey Honesty Aztec Meadowland Moorland Green Olive Green Juniper Green Sage Pinewood Eau de Nil Verona Albatross
Code (16mm)
Code (19mm)
1618B25CAP
1918B25CAP
Bags
29mm
Code: 2904E53CAP
1606E53CAP
1906E53CAP
1608B17CAP
1908B17CAP
1608B29CAP
1908B29CAP
1608C35CAP
1908C35CAP
1610A05CAP
1910A05CAP
1610B19CAP
1910B19CAP
1610B23CAP
1910B23CAP
1610C31CAP
1910C31CAP
1610E55CAP
1910E55CAP
1612B17CAP
1912B17CAP
1612B21CAP
1912B21CAP
1612B27CAP
1912B27CAP
1612B29CAP
1912B29CAP
1612D45CAP
1912D45CAP
1614C39CAP
1914C39CAP
1614E49CAP
1914E49CAP
1614E53CAP
1914E53CAP
1618B17CAP
1918B17CAP
EPDM WASHERS -
Galv. Steel
Merlin Grey Raven/Slate Blue Ocean Blue Solent Blue Britannia Cornflower Flame Red Burano Ultra Marine Sargasso Mid Blue Gentian Blue Heritage Squirrel Slate Grey Anthracite Oyster Quartz Hamlet White (Creamy) White Alum Pure White Metallic Silver
1618B29CAP
1918B29CAP
1618C39CAP
1918C39CAP
1618E53CAP
1918E53CAP
1618E58CAP
1918E58CAP
1620E51CAP
1920E51CAP
16RAL3000CAP 19RAL3000CAP 16RAL3004CAP 19RAL3004CAP 16RAL5002CAP 19RAL5002CAP 16RAL5003CAP 19RAL5003CAP 16RAL5005CAP 19RAL5005CAP 16RAL5010CAP 19RAL5010CAP 16RAL6002CAP 19RAL6002CAP 16RAL7000CAP 19RAL7000CAP 16RAL7012CAP 19RAL7012CAP 16RAL7016CAP 19RAL7016CAP 16RAL7035CAP 19RAL7035CAP 16RAL7039CAP 19RAL7039CAP 16RAL9002CAP 19RAL9002CAP 16RAL9003CAP 19RAL9003CAP 16RAL9006CAP 19RAL9006CAP 16RAL9010CAP 19RAL9010CAP 16S7500CAP
19S7500CAP
Aluminium
Metal Washer with Rubber (EPDM) Product Code
EPDM washer used where parts come in contact with water.
34
Washer
Hole
(mm)
(mm)
Washer Type
Bag Qty
16 19 29
6.8 5.8 6.8
Galv. Steel Galv. Steel Aluminium
100 100 100
Bags WG16 WG19 WA29
COVERS, WASHERS & FIXINGS
METAL CONSTRUCTION SCREWS
COVERS, WASHERS & FIXINGS For sealing roofing and cladding screws
Sela washers, Sela covers and Dowty type washers are a versatile product that are used to create a water tight seal for use with screws, bolts and nails.
SELA COVER AND WASHER SC
SW
Used when securing roofing sheets to create a watertight seal. When using spring head roofing nails just a washer is required as the head of the nail will cover the entire washer to provide a watertight seal. If using hook bolts you will also require a Sela Cover to cover the washer and nut to complete the seal. Product Code
(mm)
Bag Qty
28 M6 x 28 M8 x 28
75 75 75
Size
Bags 28SC 628SW 828SW
CORRUGATED SHEET FIXINGS
Designed for fixing plastic corrugated sheets to timber. The hinged cover cap provides a tight seal to prevent water ingress. Product Code
Colour
(Imp.)
Bag Qty
10 x 3 10 x 3
50 50
Screw Size
Bags CSFC CSFB
Clear Black
DOWTY TYPE WASHER
Perfect for Spring Head Nails and Drive Screws
Used mainly with drive screw nails and spring head roofing nails for attaching corrugated roofing sheets to wooden purlins. The washer provides a watertight seal when used correctly. Product Code
(mm)
Bag Qty
M6 M8
75 75
Size
Bags 6BPRS 8BPRS
COLLATED NAILS & FUEL CELLS DESIGNED FOR USE IN
CORDLESS GAS & PNEUMATIC NAILERS See page 83 35
METAL FRAMING SCREWS
METAL CONSTRUCTION SCREWS
METAL FRAMING SCREWS For fixing steel to steel applications Available in:
Exterior
Zinc
Used for stitching metal or attaching to metal without the need to pre-drill a hole.
PAN HEAD -
PAN HEAD -
Exterior
Low Profile
Product Code
(Metric)
MDT (mm)
Box Qty
Product Code
4.8 x 16
3
500
3
200
00658PPSD 00061PPSD 07716PPSD 00812PPSD 00834PPSD 00081PPSD
Size
Boxes LPP16
Size
Size
(Imperial)
(Metric)
MDT (mm)
Box Qty
6 x 5/8 6x1 7 x 7/16 8 x 1/2 8 x 3/4 8x1
3.5 x 16 3.5 x 25 3.9 x 11 4.2 x 13 4.2 x 19 4.2 x 25
2.5 2.5 2.5 2.5 2.5 2.5
1,000 1,000 1,000 1,000 1,000 1,000
4.2 x 13 4.2 x 19 4.2 x 25
2.5 2.5 2.5
200 200 200
Boxes
Boxes of 200’s 16LP
Zinc
Standard Profile
4.8 x 16
MDT = Maximum drill thickness.
WAFER HEAD -
Boxes of 200’s Exterior
812PSD 834PSD 81PSD
Low Profile
8 x 1/2 8 x 3/4 8x1
MDT = Maximum drill thickness.
Product Code
Size (Metric)
MDT (mm)
Box Qty
3
200
PAN HEAD -
Zinc
Standard Profile
Boxes of 200’s 22LPW
4.8 x 22
MDT = Maximum drill thickness.
Has serrations underneath the head.
PANCAKE HEAD -
Exterior
Low Profile
Product Code
Size
Size
(Imperial)
(Metric)
MDT (mm)
Box Qty
8 x 1/2
4.2 x 13
2.5
1,000
Boxes 00812SPSD
MDT = Maximum drill thickness. Product Code
(Metric)
MDT (mm)
Box Qty
5.5 x 19 5.5 x 26
5 5
500 500
5
200
Size
Boxes FP19 FP26
Boxes of 200’s 19FP
5.5 x 19
MDT = Maximum drill thickness.
36
SELF-TAPPING SCREWS
METAL CONSTRUCTION SCREWS
SELF-TAPPING SCREWS Available in:
Zinc
Black
Used for stitching metal or attaching to metal. A pre-drilled hole is required.
PAN HEAD -
Product Code
COUNTERSUNK -
Zinc
(Imperial)
Driver Bit Size
Qty
2 x 1/4 2 x 5/16 4 x 3/8 4 x 1/2 6 x 1/4 6 x 3/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1/2 10 x 5/8 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 1/2 12 x 1 12 x 11/2 14 x 3/4
No.1 No.1 No.1 No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.3 No.3 No.3 No.3
1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 1,000 1,000 1,000 500 500 500 1,000 500 1,000
6 x 1/4 6 x 3/8 6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 10 x 1/2 10 x 5/8 10 x 3/4
No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2
30 25 20 18 16 16 14 14 12 10 10 10
Size
Boxes 00214CPAZ 02516CPAZ 00438CPAZ 00412CPAZ 00614CPAZ 00638CPAZ 00612CPAZ 00658CPAZ 00634CPAZ 00061CPAZ 00838CPAZ 00812CPAZ 00858CPAZ 00834CPAZ 00081CPAZ 08114CPAZ 08112CPAZ 00082CPAZ 01012CPAZ 01058CPAZ 01034CPAZ 00101CPAZ 10114CPAZ 10112CPAZ 00102CPAZ 01212CPAZ 00121CPAZ 12112CPAZ 01434CPAZ
(Imperial)
Driver Bit Size
Qty
4 x 3/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 11/2 8 x 1/2 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 11/2
No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.3
1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 1,000 500 500 500
6 x 3/4 8 x 1/2 8 x 3/4 8x1 8 x 1 1/4 8 x 1 1/2 10 x 1 1/4
No.2 No.2 No.2 No.2 No.2 No.2 No.2
25 22 20 18 16 14 10
Size
Product Code
Zinc
Boxes 00438CCAZ 00612CCAZ 00658CCAZ 00634CCAZ 00061CCAZ 06114CCAZ 06112CCAZ 00812CCAZ 00834CCAZ 00081CCAZ 08114CCAZ 08112CCAZ 08134CCAZ 00082CCAZ 01034CCAZ 00101CCAZ 10114CCAZ 10112CCAZ 00102CCAZ 12112CCAZ
Packs 00634CCAZP 00812CCAZP 00834CCAZP 00081CCAZP 08114CCAZP 08112CCAZP 10114CCAZP
Packs 00614CPAZP 00638CPAZP 00612CPAZP 00634CPAZP 00838CPAZP 00812CPAZP 00858CPAZP 00834CPAZP 00081CPAZP 01012CPAZP 01058CPAZP 01034CPAZP
FLANGE HEAD -
Product Code
Black
(Imperial)
Driver Bit Size
Qty
6x1 8 x 1/2
No.2 No.2
1,000 1,000
Size
Boxes 00061CFAB 00812CFAB
37
MACHINE SCREWS
METAL CONSTRUCTION SCREWS
FLANGE HEAD -
(Imperial)
Driver Bit Size
Qty
6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 10 x 3/4
No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2
1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000
Size
Product Code
Zinc
Boxes
(Imperial)
Driver Bit Size
Qty
8 x 3/8 8 x 1/2 8 x 3/4 8x1
No.2 No.2 No.2 No.2
16 16 14 12
Size
Product Code
Packs
00612CFAZ 00634CFAZ 00838CFAZ 00812CFAZ 00858CFAZ 00834CFAZ 00081CFAZ 08114CFAZ 01034CFAZ
00838CFAZP 00812CFAZP 00834CFAZP 00081CFAZP
MACHINE SCREWS Available in:
Zinc
Machine screws available in various sizes for use with a metric internal thread.
COUNTERSUNK -
Product Code
Size (mm)
Qty
Boxes 4008CPM 4010CPM 4012CPM 4020CPM 4025CPM 4040CPM 5010CPM 5012CPM 5016CPM 5020CPM 5025CPM 5030CPM 5040CPM 5050cpm 6010CPM 6012CPM 6016CPM 6020CPM 6025CPM 6030CPM 6040CPM 6050CPM
38
PAN HEAD -
Zinc
Product Code
Zinc
Size (mm)
Qty
M4 x 10 M4 x 12 M4 x 16 M4 x 20 M4 x 25 M4 x 30 M4 x 40 M4 x 50 M5 x 8 M5 x 10 M5 x 12 M5 x 16 M5 x 20 M5 x 25 M5 x 30 M5 x 40 M5 x 50 M6 x 12 M6 x 16 M6 x 25 M6 x 40
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Boxes M4 x 8 M4 x 10 M4 x 12 M4 x 20 M4 x 25 M4 x 40 M5 x 10 M5 x 12 M5 x 16 M5 x 20 M5 x 25 M5 x 30 M5 x 40 M5 x 50 M6 x 10 M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
4010PPM 4012PPM 4016PPM 4020PPM 4025PPM 4030PPM 4040PPM 4050PPM 5008PPM 5010PPM 5012PPM 5016PPM 5020PPM 5025PPM 5030PPM 5040PPM 5050PPM 6012PPM 6016PPM 6025PPM 6040PPM
SOCKET SCREWS
METAL CONSTRUCTION SCREWS
SOCKET SCREWS Available in:
A2/Aust/SS.
SOCKET COUNTERSUNK SCREWS -
A2/Aust/SS.
Designed for use in applications where the head is flush with joining parts. Conforms to ISO 10642. Size
Product Code
(mm)
A/F Drive Size
Qty
Product Code
M6 x 16 M6 x 16 M6 x 25 M8 x 25 M8 x 30
5 5 5 6 6
500 200 200 100 100
616CSKSSX 620CSKSSX 625CSKSSX 825CSKSSX 830CSKSSX
Boxes
Size (mm)
A/F Drive Size
Qty
M6 x 16 M6 x 16 M6 x 25 M8 x 25 M8 x 30
5 5 5 6 6
10 10 10 10 10
Packs
616CSKSS 620CSKSS 625CSKSS 825CSKSS 830CSKSS
SOCKET CAP SCREWS -
A2/Aust/SS.
Socket head cap screws are designed to be used with the head protruding. Conforms to ISO 4762. Size
Product Code
(mm)
A/F Drive Size
Qty
Product Code
M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25
4 4 5 5 5 6 6
500 500 200 200 200 200 200
516CAPSSX 520CAPSSX 616CAPSSX 620CAPSSX 625CAPSSX 820CAPSSX 825CAPSSX
Boxes 516CAPSS 520CAPSS 616CAPSS 620CAPSS 625CAPSS 820CAPSS 825CAPSS
SOCKET BUTTON SCREWS -
Size (mm)
A/F Drive Size
Qty
M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25
4 4 5 5 5 6 6
10 10 10 10 10 10 10
Packs
A2/Aust/SS.
Designed for applications that allow the head to protrude above the joining parts. The curved design of the button head is decorative and protects adjoining parts from scrapes or other damage. Conforms to ISO 7380. Product Code
Size (mm)
A/F Drive Size
Qty
Product Code
M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M8 x 25
5 5 5 5 5 6
500 500 500 200 200 100
612BUTSSX 616BUTSSX 620BUTSSX 625BUTSSX 630BUTSSX 825BUTSSX
Boxes 612BUTSS 616BUTSS 620BUTSS 625BUTSS 630BUTSS 825BUTSS
Size (mm)
A/F Drive Size
Qty
M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M8 x 25
5 5 5 5 5 6
10 10 10 10 10 10
Packs
39
TM
Concrete Screws DESIGNED TO REPLACE TRADITIONAL MASONRY FIXINGS. F
M RA
EF
IXI
NG F
T30 TIM Drive recess to reduce driver wear & prevent camming out
M RA
EA
NC
HO
R H
Serrated V-threads to achieve optimum insertion into all masonry types
‘IDEAL FOR FITTING WINDOWS AND DOOR FRAMES’
M AM
ER
FIX
ING
Zinc plated and yellow passivated for increased corrosion resistance
Available in:
Pan Head Countersunk
INSTALL IN JUST 2 EASY STEPS
1
Drill
Drill the hole 90° to the substrate. Always over-drill the hole depth for dust and debris.
2
Fix
Using a power tool, tighten the fixing firmly against the attachment.
SEE PAGE 73
WINDOW FABRICATION SCREWS 42 - FOR UNREINFORCED FRAMES 44 - MISCELLANEOUS SCREWS 45 - FOR REINFORCED FRAMES
WINDOW FABRICATION SCREWS
FOR UNREINFORCED FRAMES
FOR UNREINFORCED FRAMES (HARDWARE) Available in: Zinc (CR3)
Yellow
A2/Aust. SS
A comprehensive range of self piercing sharp point screws used for the construction of PVCu windows\doors and for attaching hardware to the frames. Also used to retain or attach to frames using modern day plastic reinforcement.
COUNTERSUNK HEAD WITH RIBS, SINGLE THREAD, GIMLET TIP Zinc (CR3)
Yellow
A2/Aust. SS
Zinc (CR3)
Yellow
Multiple uses for fitting a variety of hardware to frames where there is no steel or aluminium reinforcement present. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes. The Stainless Steel option should be used where there is a corrosive environment.
An alternative to the single thread range offering a slash point and High/Low thread. Can also be used when ‘pinning’ PVC reinforcement. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes.
Product Code
Product Code
(Metric)
Box Qty
4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25 4.8 x 38
1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000
4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25
1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000
4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.8 x 25
1,000 1,000 1,000 1,000 1,000 1,000 1,000
Size
Zinc
Yellow 201Y 202Y 204Y 205Y 203Y 206Y 207Y 208Y 209Y*
Stainless Steel 201SS 202SS 204SS 205SS 203SS 206SS 209SS*
(Metric)
Box Qty
4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25
1,000 1,000 1,000 1,000
4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25
1,000 1,000 1,000 1,000
Size
Zinc
201Z 202Z 204Z 205Z 203Z 206Z 207Z 208Z 209Z* 210Z*
* REPAIR SCREWS FOR STRIPPED HOLES.
42
COUNTERSUNK HEAD, HI-LOW THREAD, SLASH TIP
104Z 105Z 106Z 109Z*
Yellow 104Y 105Y 106Y 109Y*
* REPAIR SCREWS FOR STRIPPED HOLES.
FOR UNREINFORCED FRAMES
WINDOW FABRICATION SCREWS
FOR UNREINFORCED FRAMES (FRICTION STAY) Available in: Zinc (CR3)
A2/Aust. SS
A comprehensive range of self piercing sharp point screws used for the construction of a PVCu window\door to fix friction stay on to PVCu.
SHALLOW PAN WITH SERRATIONS, SINGLE THREAD, GIMLET TIP Zinc (CR3)
A2/Aust. SS
Zinc (CR3)
For attaching friction stays to PVCu frames. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion. Product Code
(Metric)
Box Qty
4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30
1.000 1.000 1.000 1.000
Size
Zinc 215Z 216Z 217Z 218Z
A2/Aust. SS
For attaching friction stays with countersunk holes to PVCu frames. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion. (Metric)
Box Qty
4.3 x 16 4.3 x 20 4.3 x 25
1,000 1,000 1,000
4.3 x 16 4.3 x 20 4.3 x 25
1,000 1,000 1,000
Size
Product Code
Zinc
Stainless Steel 215SS 216SS 217SS 218SS
SHALLOW PAN COUNTERSUNK HEAD, SINGLE THREAD, GIMLET TIP
4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30
1.000 1.000 1.000 1.000
213Z 211Z 212Z
Stainless Steel 213SS 211SS 212SS
SHALLOW PAN COUNTERSUNK HEAD, HIGHLOW THREAD, SLASH TIP Zinc (CR3)
For attaching friction stays to PVCu frames. An alternative to the single thread range offering a slash point and a High/Low thread to aid speed of insertion and pull out, respectively. Product Code
(Metric)
Box Qty
4.3 x 20 4.3 x 25
1,000 1,000
Size
Zinc 111Z 112Z
43
WINDOW FABRICATION SCREWS
MISCELLANEOUS WINDOW SCREWS
ELEMENT SCREWS
MACHINE SCREWS
Yellow
Zinc (CR3)
Mechanical jointing screw with special truncated head for fixing either frame to frame or frame to mullions. The flat area underneath the head increases surface area to improve clamping. (Metric)
Box Qty
Product Code
4.8 x 55 4.8 x 65 4.8 x 80 4.8 x 95
200 200 200 200
520Z 530Z 540Z 545Z 550Z
Size
Product Code
A countersunk metric threaded machine screw used for fastening handles or espagnolettes into predefined holes in frames. A heavier gauge screw for what is normally a heavier duty requirement.
Yellow
(Metric)
Box Qty
M5 x 20 M5 x 30 M5 x 40 M5 x 45 M5 x 50
500 500 500 500 500
Size
Zinc
191Y 192Y 193Y 194Y
REINFORCED FRAME SCREWS Zinc (CR3)
BAYPOLE SCREWS
Martensitic SS
Zinc (CR3)
Used for attaching steel hardware to steel reinforced PVCu sections. The flat underside of the screws head allows it to clamp the materials together firmly. Size
Product Code
(Metric)
Box Qty
Zinc 130Z 131Z 132Z 133Z
4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25
1,000 1,000 1,000 1,000
4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25
1,000 1,000 1,000 1,000
Stainless Steel 130SS 131SS 132SS 133SS
Specifically designed for the joining of PVCu bay window sections but frequently used for other window and door fabrication purposes.
200 200 200 200 200 200 200
Zinc (CR3)
For use when attaching a weather bar or drip rail to PVCu window and door frames to prevent water ingress. Large head provides easy and secure clipping. (Metric)
Box Qty
4.0 x 13
1,000
Size
Zinc
44
4.8 x 40 4.8 x 50 4.8 x 60 4.8 x 70 4.8 x 80 4.8 x 90 4.8 x 100
CILL SCREWS
Zinc (CR3)
241Z
Box Qty
Zinc 289Z 290Z 291Z 292Z 293Z 294Z 295Z
WEATHER BAR SCREWS
Product Code
(Metric)
Size
Product Code
Used for attaching cills to the base of door or window frames. The self-drilling point permits the screw to drill through both reinforced and unreinforced frames. Product Code
(Metric)
Box Qty
4.2 x 50 4.2 x 55 4.2 x 65
500 500 200
Size
Zinc 225Z 226Z 227Z
FOR METAL REINFORCED FRAMES
WINDOW FABRICATION SCREWS
FOR REINFORCED FRAMES (HARDWARE) Available in: Zinc (CR3)
Yellow
Martensitic SS
A comprehensive range of self-drilling screws used for the construction of a PVCu window/door and for attaching hardware where there is a metal reinforcement.
COUNTERSUNK HEAD, SELF-TAPPING THREAD, SELF-DRILLING POINT Zinc (CR3)
Yellow
Martensitic SS
Multiple uses for fitting a variety of hardware to frames where there is a steel or aluminium reinforcement present. The smaller lengths with a ribbed countersunk head can also be used when pinning reinforcement. The Stainless Steel option should be used where there is a corrosive environment. Product Code
(Metric)
Box Qty
3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.6 x 29 3.9 x 32 3.9 x 38 3.9 x 45
1,000 1,000 1,000 1,000 1,000 1,000 1,000 500
3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38 3.9 x 45
1,000 1,000 1,000 1,000 1,000 1,000 500
3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38
1,000 1,000 1,000 1,000 1,000
Size
Zinc 120Z# 121Z# 122Z# 123Z 126Z 124Z 125Z 127Z
Yellow 120Y# 121Y# 122Y# 123Y 124Y 125Y 127Y
COUNTERSUNK HEAD, METRIC THREAD, SELF-DRILLING POINT Zinc (CR3)
Yellow
An alternative to the self tapping thread version. This metric threaded screw has multiple uses for fitting a variety of hardware to frames where there is a steel reinforcement present.
Product Code
(Metric)
Box Qty
M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38
1,000 1,000 1,000 1,000 500
M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38
1,000 1,000 1,000 1,000 500
Size
Zinc 150Z 151Z 153Z 154Z 155Z
Yellow 150Y 151Y 153Y 154Y 155Y
Stainless Steel 121SS# 122SS# 123SS 124SS 125SS
45
WINDOW FABRICATION SCREWS
FOR METAL REINFORCED FRAMES
FOR REINFORCED FRAMES (HARDWARE) COUNTERSUNK FACET HEAD, METRIC THREAD, SELF-DRILLING POINT Zinc (CR3)
COUNTERSUNK HEAD, SELF-TAPPING THREAD, SELF-DRILLING POINT
Martensitic SS
Zinc (CR3)
Frequently used with auto feed machines when ‘pinning’ steel reinforcement inside PVCu frames. (Metric)
Box Qty
M4 x 13 M4 x 16 M4 x 19
1,000 1,000 1,000
M4 x 16
1,000
Size
Product Code
Zinc 230Z 231Z 232Z
Stainless Steel 231SS
A heavier gauge screw, generally used where extra strength is required such as attaching hinges to a steel reinforced frame. Countersunk head to suit the pre-defined holes in standard hinges.
(Metric)
Box Qty
4.8 x 25 4.8 x 32 4.8 x 38 4.8 x 45 4.8 x 60
1,000 500 500 500 200
Size
Product Code
Zinc 423Z 424Z 425Z 427Z 429Z
FOR REINFORCED FRAMES (FRICTION STAY) Available in: Zinc (CR3)
Martensitic SS
A range of fasteners designed to fix friction stay on to PVCu with metal re-enforcement.
SHALLOW PAN, SELF-TAPPING THREAD, SELF-DRILLING POINT Zinc (CR3)
Martensitic SS
(Metric)
Box Qty
3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 29 4.8 x 16 4.8 x 19 4.8 x 23
1,000 1,000 1,000 1,000 1,000 1,000 1,000
3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 29 4.8 x 23
1,000 1,000 1,000 1,000 1,000
Size
Product Code
Zinc For attaching friction stays with countersunk holes to steel reinforced PVCu frames. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion.
135Z 136Z 137Z 138Z 141Z* 142Z* 143Z*
Stainless Steel 135SS 136SS 137SS 138SS 143SS*
* REPAIR SCREWS for stripped holes.
46
NUTS, BOLTS, SETS & WASHERS 48 - CARRIAGE BOLTS 50 - ROOFING BOLTS 50 - CABLE TRAY BOLTS 51 - THREADED BAR
52 - SETS 53 - NUTS 55 - WASHERS 58 - MIXED SET
CARRIAGE BOLT & NUT
NUTS, BOLTS, SETS & WASHERS
CARRIAGE BOLT & HEX NUT
Materials
Available in: Zinc (CR3) To BS
EN ISO
14592:2
008
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber. Fully threaded up to 150mm. Product Code
Boxes
0620CB 0625CB 0630CB 0640CB 0650CB 0660CB 0665CB 0670CB 0675CB 06100CB 06130CB 06150CB 0820CB 0825CB 0830CB 0835CB 0840CB 0845CB 0850CB 0860CB 0865CB 0870CB 0875CB 0880CB 0890CB 08100CB 08110CB 08120CB 08130CB 08150CB 08180CB 08200CB 1025CB 1030CB 1035CB 1040CB 1050CB 1065CB 1070CB 1075CB 1080CB 1090CB 10100CB 10110CB 10120CB 10130CB 10140CB 10150CB 10160CB 10180CB 10200CB 10220CB 10240CB 10260CB 10280CB 10300CB
48
Thread x Length
Nut A/F
(mm)
(mm)
M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 65 M6 x 70 M6 x 75 M6 x 100 M6 x 130 M6 x 150 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 45 M8 x 50 M8 x 60 M8 x 65 M8 x 70 M8 x 75 M8 x 80 M8 x 90 M8 x 100 M8 x 110 M8 x 120 M8 x 130 M8 x 150 M8 x 180 M8 x 200 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 65 M10 x 70 M10 x 75 M10 x 80 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 140 M10 x 150 M10 x 160 M10 x 180 M10 x 200 M10 x 220 M10 x 240 M10 x 260 M10 x 280 M10 x 300
10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17
Qty
200 200 200 200 200 100 100 100 100 100 50 50 200 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 100 100 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10
Product Code
Thread x Length
Nut A/F
(mm)
(mm)
1250CB 1265CB 1275CB 1290CB 12100CB 12110CB 12120CB 12130CB 12140CB 12150CB 12160CB 12180CB 12200CB 12220CB 12240CB 12260CB 12280CB 12300CB 16100CB 16110CB 16150CB 16180CB 16200CB
M12 x 50 M12 x 65 M12 x 75 M12 x 90 M12 x 100 M12 x 110 M12 x 120 M12 x 130 M12 x 140 M12 x 150 M12 x 160 M12 x 180 M12 x 200 M12 x 220 M12 x 240 M12 x 260 M12 x 280 M12 x 300 M16 x 100 M16 x 110 M16 x 150 M16 x 180 M16 x 200
19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 24 24 24 24 24
25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5
M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M10 x 200 M12 x 75 M12 x 100 M12 x 130 M12 x 150 M12 x 200
13 13 13 13 17 17 17 17 17 17 17 19 19 19 19 19
40 35 30 24 28 24 20 20 14 12 10 14 14 12 10 5
M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M12 x 75 M12 x 100 M12 x 130
13 13 13 13 17 17 17 17 17 17 19 19 19
4 3 3 2 3 2 2 2 2 2 2 2 2
Bags
08100CBB 08110CBB 08130CBB 08150CBB 1075CBB 10100CBB 10120CBB 10130CBB 10150CBB 10180CBB 10200CBB 1275CBB 12100CBB 12130CBB 12150CBB 12200CBB
Qty
Packs 08100CBP 08110CBP 08130CBP 08150CBP 1075CBP 10100CBP 10120CBP 10130CBP 10150CBP 10180CBP 1275CBB 12100CBP 12130CBP
CARRIAGE / ROOFING BOLTS & NUT
NUTS, BOLTS, SETS & WASHERS
EXTERIOR CARRIAGE BOLT & HEX NUT Exterior bolt & nut
To BS
Available in:
EN ISO
14592:2
008
Exterior Product Code
(Metric)
Nut A/F (mm)
10 x 100 10 x 150 10 x 160 10 x 200 10 x 220
17 17 17 17 17
Size
Qty
Bags A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber.
10100INCB 10150INCB 10160INCB 10200INCB 10220INCB
10 10 10 10 10
STAINLESS STEEL CARRIAGE BOLTS Available in: A2/Aust.SS
Materials
To BS
Product Code
Thread x Length (mm)
Qty
Product Code
200 200 200 200 50 50 100 100 100 50 50 50 25 25 50 50 50 25 25 25 25 50 50 25 25 25
0625CBSSX 0630CBSSX 0640CBSSX 0650CBSSX 0675CBSSX 06100CBSSX 0840CBSSX 0850CBSSX 0860CBSSX 0875CBSSX 0880CBSSX 08100CBSSX 08130CBSSX 08150CBSSX 1075CBSSX 1090CBSSX 10100CBSSX 10110CBSSX 10120CBSSX 10130CBSSX 10150CBSSX 1275CBSSX 12100CBSSX 12110CBSSX 12130CBSSX 12150CBSSX
Boxes 0625CBSS 0630CBSS 0640CBSS 0650CBSS 0675CBSS 06100CBSS 0840CBSS 0850CBSS 0860CBSS 0875CBSS 0880CBSS 08100CBSS 08130CBSS 08150CBSS 1075CBSS 1090CBSS 10100CBSS 10110CBSS 10120CBSS 10130CBSS 10150CBSS 1275CBSS 12100CBSS 12110CBSS 12130CBSS 12150CBSS
EN ISO
14592:2
008
A cup square carriage bolt & hex nut in A2 stainless steel. A full metric coarse thread. Thread x Length (mm)
Qty
Bags M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 75 M6 x 100 M8 x 40 M8 x 50 M8 x 60 M8 x 75 M8 x 80 M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 150 M12 x 75 M12 x 100 M12 x 110 M12 x 130 M12 x 150
M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 75 M6 x 100 M8 x 40 M8 x 50 M8 x 60 M8 x 75 M8 x 80 M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 150 M12 x 75 M12 x 100 M12 x 110 M12 x 130 M12 x 150
10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
49
CABLE TRAY BOLT / HEX NUTS & SETS
NUTS, BOLTS, SETS & WASHERS
ROOFING BOLT & NUT
Materials
Available in: Zinc (CR3)
Manufactured with a large flat head, making it ideal for clamping thin sheet metal, plastic and wood
Product Code
Thread x Length
Nut
(mm)
(mm)
M5 x 12 M5 x 30 M6 x 08 M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M6 x 60 M6 x 70 M6 x 80 M6 x 100 M8 x 25 M8 x 30 M8 x 40 M8 x 50 M8 x 60 M8 x 80 M8 x 100 M8 x 120 M8 x 140 M8 x 160 M8 x 180 M8 x 200
M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8
Qty
Boxes 0512RB 0530RB 0608RB 0612RB 0616RB 0620RB 0625RB 0630RB 0635RB 0640RB 0650RB 0660RB 0670RB 0680RB 06100RB 0825RB 0830RB 0840RB 0850RB 0860RB 0880RB 08100RB 08120RB 08140RB 08160RB 08180RB 08200RB
Product Code
Thread x Length
Nut
(mm)
(mm)
M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80
M6 M6 M6 M6 M6 M6 M6 M6
150 140 130 120 110 90 80 70
M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80
M6 M6 M6 M6 M6 M6 M6 M6
14 12 10 10 8 8 6 4
Qty
Bags 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50
0612RBB 0620RBB 0625RBB 0630RBB 0640RBB 0650RBB 0660RBB 0680RBB
Packs 0612RBP 0620RBP 0625RBP 0630RBP 0640RBP 0650RBP 0660RBP 0680RBP
CABLE TRAY BOLTS & HEX NUT Available in:
Materials
Zinc (CR3)
Product Code
Thread x Length
Nut
(mm)
(mm)
M6 x 12 M6 x 16 M6 x 20 M6 x 25
M6 M6 M6 M6
Qty
Boxes Specifically designed to provide a rapid and secure fixing when erecting cable trays. The combi recess or hex flange nut can be used with a power tool.
50
CTB612 CTB616 CTB620 CTB625
200 200 200 200
THREADED BAR / HEX NUTS & SETS
NUTS, BOLTS, SETS & WASHERS
THREADED BAR
SETS & HEX NUTS
Threaded Bar or rod has multiple industrial applications. Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Metric thread for use with standard nuts and connectors.
ZINC THREADED BAR Product Code
Thread x Length (mm)
Qty
10 10 10 10 10
M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000
10 10 10 10 10 5
STAINLESS STEEL THREADED BAR A2/Aus.SS Product Code
Thread x Length (mm)
Qty
Packs (1000mm) 06TBSS 08TBSS 10TBSS 12TBSS 16TBSS 20TBSS
M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000
5 5 5 5 5 5
HIGH TENSILE THREADED BAR Zinc (CR3) Product Code
Thread x Length (mm)
Qty
Packs (1000mm) 06TBZHT 08TBZHT 10TBZHT 12TBZHT 16TBZHT 20TBZHT
A fully threaded high tensile bolt used in a wide variety of applications.
Product Code
Thread x Length
A/F
(mm)
(mm)
M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100
10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19
130 115 100 70 60 55 45 40 30 35 32 28 25 20 16 25 23 22 20 18 14 10
M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100
10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19
8 8 6 4 6 4 2 2 2 2 2 2 2 2 16 25 23 22 20 18 14 10
Qty
Bags M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300
Packs (1000mm) 06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ
Zinc (CR3)
Zinc (CR3)
Packs (300mm) 06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ
Available in:
M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000
10 10 10 10 10 5
616SNZB 620SNZB 625SNZB 650SNZB 820SNZB 825SNZB 840SNZB 850SNZB 870SNZB 1025SNZB 1030SNZB 1040SNZB 1050SNZB 1070SNZB 10100SNZB 1225SNZB 1230SNZB 1235SNZB 1240SNZB 1250SNZB 1270SNZB 12100SNZB
Packs 616SNZP 620SNZP 625SNZP 650SNZP 820SNZP 825SNZP 840SNZP 850SNZP 870SNZP 1025SNZP 1030SNZP 1040SNZP 1050SNZP 1070SNZP 10100SNZP 1225SNZP 1230SNZP 1235SNZP 1240SNZP 1250SNZP 1270SNZP 12100SNZP
51
SETS
NUTS, BOLTS, SETS & WASHERS
SETS (DIN 933) Available in:
Zinc (CR3)
A fully threaded high tensile bolt used in a wide variety of applications.
Product Code
Thread x Length
A/F
(mm)
(mm)
M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M8 x 16 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 50 M8 x 60 M8 x 70 M8 x 80 M8 x 100 M10 x 20 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 60 M10 x 70 M10 x 75 M10 x 80 M10 x 100 M12 x 25 M12 x 30 M12 x 35
10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 19 19 19
Qty
Product Code
500 500 500 500 500 500 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 100 100 100 100 100 100 100 50 100 100 100
S1240Z S1245Z S1250Z S1260Z S1270Z S1275Z S1280Z S12100Z S12120Z S1625Z S1630Z S1635Z S1640Z S1645Z S1650Z S1655Z S1660Z S1665Z S1670Z S1675Z S1680Z S16100Z S2040Z S2045Z S2050Z S2055Z S2060Z S2065Z S2070Z S2075Z S2080Z S2090Z S20100Z
Boxes S612Z S616Z S620Z S625Z S630Z S635Z S640Z S650Z S816Z S820Z S825Z S830Z S835Z S840Z S850Z S860Z S870Z S880Z S8100Z S1020Z S1025Z S1030Z S1035Z S1040Z S1050Z S1060Z S1070Z S1075Z S1080Z S10100Z S1225Z S1230Z S1235Z
52
Thread x Length
A/F
(mm)
(mm)
M12 x 40 M12 x 45 M12 x 50 M12 x 60 M12 x 70 M12 x 75 M12 x 80 M12 x 100 M12 x 120 M16 x 25 M16 x 30 M16 x 35 M16 x 40 M16 x 45 M16 x 50 M16 x 55 M16 x 60 M16 x 65 M16 x 70 M16 x 75 M16 x 80 M16 x 100 M20 x 40 M20 x 45 M20 x 50 M20 x 55 M20 x 60 M20 x 65 M20 x 70 M20 x 75 M20 x 80 M20 x 90 M20 x 100
19 19 19 19 19 19 19 19 19 24 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30
Qty
Boxes 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20
NUTS
NUTS, BOLTS, SETS & WASHERS
NUTS Available in: Zinc (CR3)
A2/Aust.SS
A range of metric threaded zinc and stainless steel nuts, includes the most popular types.
HEX FULL NUTS -
HEX FULL NUTS -
Zinc (CR3)
A traditional nut used for all bolting and fastening applications.
Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M4 M5 M6 M8 M10 M12 M16 M20
3.2 4 5 6.5 8 10 13 16
7 8 10 13 17 19 24 30
Qty
Boxes NH4Z NH5Z NH6Z NH8Z NH10Z NH12Z NH16Z NH20Z
A full hex nut in A2 stainless steel. Conforms to DIN 934.
Size
Height
A/F
(mm)
(mm)
(mm)
M4 M5 M6 M8 M10 M12 M16
3.2 4 5 6.5 8 10 13
7 8 10 13 17 19 24
1,000 1,000 500 200 100 100 100
NH4SSX NH5SSX NH6SSX NH8SSX NH10SSX NH12SSX NH16SSX
M4 M5 M6 M8 M10 M12 M16
3.2 4 5 6.5 8 10 13
7 8 10 13 17 19 24
10 10 10 10 10 5 5
Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16
8 9.5 11.5 14 18
10 13 17 19 24
300 300 130 90 45
M6 M8 M10 M12 M16
8 9.5 11.5 14 18
10 13 17 19 24
20 10 4 4 2
Product Code
Qty
Boxes 1,500 1,000 500 200 100 100 100 50
Bags 6HNUTZB 8HNUTZB 10HNUTZB 12HNUTZB 16HNUTZB 20HNUTZB
A2/Aust.SS
M6 M8 M10 M12 M16 M20
5 6.5 8 10 13 16
10 13 17 19 24 30
600 300 130 90 45 20
M6 M8 M10 M12 M16 M20
5 6.5 8 10 13 16
10 13 17 19 24 30
40 30 20 10 4 2
NH4SS NH5SS NH6SS NH8SS NH10SS NH12SS NH16SS
Bags
Packs 6HNUTZP 8HNUTZP 10HNUTZP 12HNUTZP 16HNUTZP 20HNUTZP
NYLON INSERT NUTS (TYPE P) - Zinc (CR3) Also known as locking nuts designed to prevent the nut from loosening.
Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16
8 9.5 11.5 14 18
10 13 17 19 24
Qty
Boxes NP6Z NP8Z NP10Z NP12Z NP16Z
Qty
Bags 6NPB 8NPB 10NPB 12NPB 16NPB
Packs 500 200 100 100 100
6NPP 8NPP 10NPP 12NPP 16NPP
53
NUTS
NUTS, BOLTS, SETS & WASHERS
NYLON INSERT NUTS (TYPE T) - Zinc (CR3) An economic nut thinner than Type P, designed to prevent the nut from loosening. Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
Qty
Boxes NT6Z NT8Z NT10Z NT12Z NT16Z
M6 M8 M10 M12 M16
6 8 10 12 16
10 13 17 19 24
500 200 100 100 100
Zinc (CR3)
Ideal for protective or aesthetic uses.
Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
12 15 18 22 28 34
10 13 17 19 24 30
Qty
Boxes ND6Z ND8Z ND10Z ND12Z ND16Z ND20Z
200 100 100 100 100 50
NYLON INSERT NUTS (TYPE T) - A2/Aust.SS
HEX DOME NUT-
A hexagonal nylon nut, Type T in A2 stainless steel. Sometimes known as a ‘thin nut’. A metric coarse thread. Conforms to ISO 10511.
A hexagonal dome nut, in A2 stainless steel, ideal for protective or aesthetic uses. A metric coarse thread. Conforms to DIN1587.
Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M5 M6 M8 M10 M12 M16
4 6 8 10 12 16
8 10 13 17 19 24
1000 500 200 100 100 100
M5 M6 M8 M10 M12 M16
4 6 8 10 12 16
8 10 13 17 19 24
10 10 10 10 5 5
Qty
Boxes NT5SS NT6SS NT8SS NT10SS NT12SS NT16SS NT5SSX NT6SSX NT8SSX NT10SSX NT12SSX NT16SSX
HEX SERRATED FLANGE NUTS - Zinc (CR3) Designed to provide a larger clamping and locking force than a standard hex nut. Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
6 8 10 12 16 20
10 13 17 19 24 30
Qty
Boxes NF6Z NF8Z NF10Z NF12Z NF16Z NF20Z
Product Code
A2/Aust.SS
Size
Height
A/F
(mm)
(mm)
(mm)
M5 M6 M8 M10 M12
10 12 15 18 22
8 10 13 17 19
500 200 100 100 100
M5 M6 M8 M10 M12
10 12 15 18 22
8 10 13 17 19
10 10 10 10 5
Qty
Boxes
Bags
54
HEX DOME NUT -
300 200 100 100 100 50
ND5SS ND6SS ND8SS ND10SS ND12SS
Bags ND5SSX ND6SSX ND8SSX ND10SSX ND12SSX
NUTS & WASHERS HEX CONNECTOR NUT -
NUTS, BOLTS, SETS & WASHERS
WING NUT -
Zinc (CR3)
For extending the length of threaded bar. Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
A light duty nut used to be fastened by hand where the nut is regularly removed.
Qty
Product Code
Boxes NC6Z NC8Z NC10Z NC12Z NC16Z NC20Z
M6 M8 M10 M12 M16 M20
18 24 30 36 48 60
10 13 17 19 24 30
Zinc (CR3)
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
Qty
Boxes
200 100 100 100 50 25
NW6Z NW8Z NW10Z NW12Z NW16Z
300 200 100 100 100
WASHERS Zinc (CR3)
Available in:
A2/Aust.SS
A variety of zinc and stainless steel plated washers to suit multiple applications.
FORM A WASHER -
Zinc (CR3)
FORM A WASHER -
A traditional and commonly used washer for clamping and spacing applications. Conforms to DIN 125-A.
A traditional and commonly used washer for clamping and spacing applications. Product Code
Size
Outer Thickness
(mm)
(mm)
(mm)
M4 M5 M6 M8 M10 M12 M14 M16 M20 M24
9 10 12.5 17 21 24 24 30 37 44
0.8 1 1.6 1.6 2 2.5 2.5 3 3 4
1,250 1,000 500 200 100 100 100 100 100 100
M6 M8 M10 M12 M16 M20
12.5 17 21 24 30 37
1.6 1.6 2 2.5 3 3
500 350 200 130 75 50
M6 M8 M10 M12 M16 M20
12.5 17 21 24 30 37
1.6 1.6 2 2.5 3 3
60 30 20 15 8 4
Qty
Boxes WA4Z WA5Z WA6Z WA8Z WA10Z WA12Z WA14Z WA16Z WA20Z WA24Z
Product Code
Size
Outer Thickness
(mm)
(mm)
(mm)
M4 M5 M6 M8 M10 M12 M16
9 10 12 16 20 24 30
0.8 1 1.6 1.6 2 2.5 3
1000 1000 1000 500 500 200 100
M4 M5 M6 M8 M10 M12 M16
9 10 12 16 20 24 30
0.8 1 1.6 1.6 2 2.5 3
50 50 20 20 10 10 10
Qty
Boxes
Bags 6WHAZB 8WHAZB 10WHAZB 12WHAZB 16WHAZB 20WHAZB
A2/Aust.SS
WA4SS WA5SS WA6SS WA8SS WA10SS WA12SS WA16SS
Bags WA4SSX WA5SSX WA6SSX WA8SSX WA10SSX WA12SSX WA16SSX
Packs 6WHAZP 8WHAZP 10WHAZP 12WHAZP 16WHAZP 20WHAZP
55
WASHERS
NUTS, BOLTS, SETS & WASHERS
FORM B WASHER -
SPRING WASHER -
Zinc (CR3)
An economic washer thinner than a Form A, used for clamping and spacing applications. Product Code
Size
Outer
Thickness
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
12 17 21 24 30 27
0.8 1 1.25 1.6 2 2
Qty
Boxes WB6Z WB8Z WB10Z WB12Z WB16Z WB20Z
Designed to prevent the nut from loosening. Also has square section. Product Code
500 200 100 100 100 100
A2/Aust.SS
Size
Outer Thickness
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16
12 16 20 24 30
0.8 1 1.25 1.6 2
1000 500 500 200 100
Bags M6 M8 M10 M12 M16
12 16 20 24 30
FORM C WASHER -
0.8 1 1.25 1.6 2
20 20 10 10 10
Zinc (CR3)
A wider diameter washer than the Form A & B used to increase the clamping area. Product Code
Size
Outer Thickness
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
14 21 24 28 34 39
1.6 1.6 2 2.5 3 4
Qty
Boxes WC6Z WC8Z WC10Z WC12Z WC16Z WC20Z
56
Qty
M6 x 9.9 x 3.2 x 1.6
500
WSP8Z
M8 x 12.7 x 4 x 2
250
WSP10Z
M10 x 16 x 5 x 2.5
200
WSP12Z
M12 x 18 x 5 x 2.5
200
WSP16Z
M16 x 24.4 x 7 x 3.5
100
SQUARE PLATE WASHER -
Zinc (CR3)
Designed to provide a large clamping surface and therefore spreading the load of a fastening.
Qty
Boxes
WB6SSX WB8SSX WB10SSX WB12SSX WB16SSX
(mm)
WSP6Z
Thinner than a Form A, used for clamping and spacing applications. Conforms to DIN 125-B.
WB6SS WB8SS WB10SS WB12SS WB16SS
Size Hole x L x W x D
Boxes
FORM B WASHER -
Product Code
Zinc (CR3)
500 200 100 100 100 100
Product Code
Size Hole x L x W x D (mm)
Qty
Boxes WS8403Z
M8 x 40 x 40 x 3
WS8405Z
M8 x 40 x 40 x 5
100 100
WS10403Z
M10 x 40 x 40 x 3
100
WS10405Z
M10 x 40 x 40 x 5
100
WS10503Z
M10 x 50 x 50 x 3
100
WS12503Z
M12 x 50 x 50 x 3
100
WS16503Z
M16 x 50 x 50 x 3
100
1050WHSPZB
M10 x 50 x 50 x 3
30
1250WHSPZB
M12 x 50 x 50 x 3
30
Bags Packs 1050WHSPZP
M10 x 50 x 50 x 3
2
1250WHSPZP
M12 x 50 x 50 x 3
2
WASHERS PENNY/REPAIR WASHER -
Zinc (CR3)
NUTS, BOLTS, SETS & WASHERS
PENNY/REPAIR WASHER -
A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Size
Outer Thickness
(mm)
(mm)
(mm)
WP525Z
M5
25
1.5
100
WP620Z
M6
20
1.5
100
WP625Z
M6
25
1.5
WP630Z
M6
30
WP640Z
M6
WP825Z WP830Z
A2/Aust.SS
Conforms to DIN 9054.
Size
Outer Thickness
(mm)
(mm)
(mm)
WP525SS
M5
25
1.5
200
WP625SS
M6
25
1.5
200
100
WP825SS
M8
25
1.5
200
1.5
100
WP835SS
M8
35
1.5
200
40
1.5
100
WP1025SS
M10
25
1.5
200
M8
25
1.5
100
WP1035SS
M10
35
1.5
200
M8
30
1.5
100
WP1235SS
M12
35
1.5
200
WP840Z
M8
40
1.5
100
WP1025Z
M10
25
1.5
100
Bags
WP1030Z
M10
30
1.5
100
WP1040Z
M10
40
1.5
100
WP1240Z
M12
40
1.5
100
Product Code
Qty
Boxes
Product Code
Qty
Boxes
Bags
WP525SSX
M5
25
1.5
10
WP625SSX
M6
25
1.5
10
WP825SSX
M8
25
1.5
10
WP835SSX
M8
35
1.5
10
WP1025SSX
M10
25
1.5
10
625WHPZB
M6
25
1.5
160
WP1035SSX
M10
35
1.5
10
825WHPZB
M8
25
1.5
160
WP1235SSX
M12
35
1.5
10
1040WHPZB
M10
40
1.5
60
WP1240Z
M12
40
1.5
50
625WHPZP
M6
25
1.5
10
640WHPZP
M6
40
1.5
4
825WHPZP
M8
25
1.5
8
840WHPZP
M8
40
1.5
4
1040WHPZP
M10
40
1.5
4
Packs
57
WASHERS
NUTS, BOLTS, SETS & WASHERS
MIXED BOLTS, NUTS AND WASHERS SET - 500PCS Nuts, bolts and washer set in a zinc finish presented in a re-usable plastic carry case. Set contains 500 pieces.
Product Code
Description
Size (mm)
Case Qty
Hex Nut DIN934 Hex Nut DIN934 Hex Nut DIN934 Form A Washer Form A Washer Form A Washer Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933
M6 M8 M10 M6 M8 M10 M6 x 16 M6 x 20 M6 x 25 M8 x 30 M8 x 40 M8 x 50 M10 x 60 M10 x 70 M10 x 75
75 30 20 150 60 50 30 20 20 10 10 5 10 6 4
CASE MIXBNWS
SDS Plus Drill Bits Features Twin V flute design for increased drilling performance and dust extraction. Large range of sizes for most applications, including direct fix anchors.
High quality Tungsten Carbide tip. P.G.M. approved and marked.
SDS Plus Steels
Point
58 58
Tile
Spade
Gouge
SEE PAGE
111
FIXINGS & FASTENERS 60 - CABLE TIES 61 - HOOKS AND EYES
62 - SANITARY FIXINGS 64 - PIPE CLIPS
CABLE TIES
FIXINGS & FASTENERS
CABLE TIES Available in:
Nylon
An economic and convenient solution designed to bundle and secure wires, cables, hoses and more. Available in multiple colours. Manufactured from nylon with operational temperature range of -40°c to 85°c.
NATURAL CABLE TIES
Product Code
BLACK CABLE TIES
(mm)
Tensile Strength
Qty
Product Code
2.5 x 100 3.6 x 140 3.6 x 200 4.5 x 180 4.5 x 200 4.5 x 300 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530
8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
25100CTB 36140CTB 36200CTB 45180CTN 45200CTN 45300CTN 48160CTB 48200CTB 48250CTB 48300CTB 48370CTB 48430CTB 76250CTB 76300CTB 76370CTB 76540CTB 90530CTB
Size
Bags 25100CTN 36140CTN 36200CTN 45180CTN 45200CTN 45300CTN 48160CTN 48200CTN 48250CTN 48300CTN 48370CTN 48430CTN 76250CTN 76300CTN 76370CTN 76540CTN 90530CTN
2.5 x 100 3.6 x 140 3.6 x 200 4.5 x 180 4.5 x 200 4.5 x 300 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530
8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Size
Tensile Strength
Qty
A simple solution for attaching a cable tie to masonry or timber.
2.5 x 100
22.20
200
Product Code
* 50 of each colour (Yellow, Green, Red & Blue)
(mm)
Drill Hole Size (mm)
Qty
8 x 40
8
100
Size
Bags 840CTP
60
Qty
CABLE TIE PLUGS
Bags 48200CTMIX
Tensile Strength
Size
Bags
COLOURED CABLE TIES*
Product Code
(mm)
HOOKS & EYES
FIXINGS & FASTENERS
HOOKS & EYES PICTURE HOOK SET
SCREW HOOKS -
For hanging pictures.
A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug.
Product Code
Part
Qty
Wire (Ø 0.92mm x 3.5m) No.2 Single Hook No.3 Double Hook No.2 & No.3 Mixed Hooks
1 12 4 8
Packs 35BWP 2PHSP 3PHDP MPHP
ROUND CUP HOOKS
Size
Colour
(mm)
Qty
Packs 19SHBP 25SHBP 25SHWP 38SHBP 38SHWP
19 25 25 38 38
Brass Brass White Brass White
15 10 6 5 4
A light duty horizontal hook to be used into wood for hanging small items. Product Code
Size (mm)
Product Code
60 80 100
4 3 2
Zinc
Size (mm)
Qty
Packs 30SEP 40SEP 45SEP 55SEP
30 40 45 55
15 10 5 4
Zinc
There are multiple uses but commonly used to thread string or wire to train plants up fences or walls with the use of a plug.
Qty
Product Code
16 8
75VEP 100VEP
Size (mm)
Qty
Packs
Packs 25SQBP 38SQBP
Qty
A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug.
VINE EYES -
SQUARE CUP HOOKS
Size (mm)
Packs 60SHP 80SHP 100SHP
SCREW EYES -
A light duty horizontal or vertical hook to be used into wood for hanging small items such as keys. Available in a brass or white finish. Product Code
Product Code
Zinc
25 38
4.3 x 75 4.3 x 100
4 2
61
SANITARY FIXINGS
FIXINGS & FASTENERS
Materials
SANITARY FIXINGS For fixing bathroom fixtures
Complete fixing kits for quick and easy installation of sanitary ware including wash basins, toilets and bidets. Suitable for use with a variety of solid building materials including concrete, natural stone, brick and timber.
BASIN FIXING KITS
PAN/BIDET FIXING KITS
Installation Guide
Installation Guide
Designed to securely mount washbasins to a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the basin during installation. *Can also be used into wood without nylon plugs.
Designed for floor fixing pan/bidets into a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Flat caps for a concealed finish. *Can also be used into wood without nylon plugs.
LIGHT DUTY Product Code
Description
Size (mm)
Item Qty
Nylon Plugs Stud Screws Nylon Bushes Washers Hex Full Nuts
10 M8 x 100 M8 M8 M8
2 2 2 2 2
Bags LDBK
Description
Size (mm)
Item Qty
Nylon Plugs Stud Screws Nylon Bushes Washers Hex Full Nuts
14 M10 x 140 M10 M10 M10
2 2 2 2 2
Bags HDBK
62
Description
Size (mm)
Item Qty
Nylon Plug Hex Slotted Coach Screws Nylon Bushes White Flat Caps
10 6 x 80 6 18
2 2 2 2
Bags
HEAVY DUTY Product Code
Product Code
PBK
SANITARY FIXINGS
FIXINGS & FASTENERS
CLOAKROOM BASIN FIXING KITS
ADJUSTABLE WC FIXING KITS
Installation Guide
Installation Guide
Designed to fix cloakroom basins to a variety of solid building materials. *Can also be used into wood without nylon plugs.
Designed to fix WC pan/bidets to a variety of solid building materials. Fully adjustable for a quick easy installation. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. *Can also be used into wood without nylon plugs.
Product Code
Description
Size (mm)
Item Qty
Basin Brackets Nylon Plugs Washers Hex Head Coach Screws
10 7 7 x 60
2 2 2 2
Bags CBK
Product Code
Description
Size (mm)
Item Qty
Nylon Support Bracket Nylon Plug Hex Slotted Coach Screws Nylon Bushes Washers Screws Chrome Cover Caps
10 6 x 70 5 6 4.5 x 40 18
2 2 2 2 2 2 2
Bags
WCBK
63
PIPE CLIPS
FIXINGS & FASTENERS
PIPE CLIPS Designed and manufactured to accommodate today’s standard pipe sizes. Manufactured in the UK using a high quality polypropylene to prevent snapping and to give a secure fixing.
SINGLE QUICK LOCK PIPE CLIP
QUICK LOCK SPACER
A robust range of clips designed to withstand repeated opening and closing offering 360° degree pipe retention. The clips provide a very secure grip when the pipe is in place and the snap tight locking top offers complete security of the pipe. The high standoff allows for lagging and heat circulation.
The Quick Lock spacer is designed to suit all single clips to allow a greater stand-off where site conditions apply or where thicker lagging is used.
Product Code
Product Code
Screw Size (Imp.)
Size (mm)
Qty
3.5 - 4.5
6, 7, 8
13
50
Bags QSP1
Screw Size (mm)
Screw Size (Imp.)
Size (mm)
Qty
3.5 - 4.5 3.5 - 4.5 3.5 - 4.5
6, 7, 8 6, 7, 8 6, 7, 8
15 22 28
50 50 50
Bags QS15 QS22 QS28
Screw Size (mm)
SINGLE OPEN PIPE CLIP The single open clip provides a strong and reliable snap fit pipe fixing, installed using either No.8 or No.10 woodscrews.
NAIL IN PIPE CLIP Product Code
Zinc plated hardened and tempered nail suitable for all types of masonry.
Size (mm)
Qty
10 15 22
50 50 50
Size (mm)
Qty
3.5 - 4.5 3.5 - 4.5 3.5 - 4.5
6, 7, 8 6, 7, 8 6, 7, 8
15 22 28
50 50 50
SINGLE HINGED PIPE CLIP
Bags NCW10 NCW15 NCW22
Screw Size (Imp.)
Bags OPS15 OPS22 OP28
Product Code
Screw Size (mm)
The single hinged clip is available in sizes to fit MDPE pipe, in blue to match the pipe colour.
Product Code
Screw Size (mm)
Screw Size Size (Imp.) (mm)
To Fit Qty (mm)
Bags TMS20 TMS25 TMS35
64
3.5 - 4.5 3.5 - 4.5 3.5 - 4.5
6, 7, 8 6, 7, 8 6, 7, 8, 10
20 25 35
19 - 21 10 25 - 27.4 10 31.8 - 35 10
PLASTERBOARD FIXINGS 66 - SPRING TOGGLES 66 - HAMMER-IN FIXINGS
67 - METAL CAVITY ANCHORS 67 - SPEED PLUGS
PLASTERBOARD FIXINGS
HAMMER-IN & SPRING TOGGLES
HAMMER-IN FIXINGS
Materials
Light duty fixtures into plasterboard
A rapid light duty plasterboard fixing for use in a wide range of applications. Serrated point for easy hammering and quick installation. Supplied with screws. Installation Guide
Product Code
Screw ØxL
MFT (mm)
Qty
4 x 30
6
100
Boxes HPF30
MFT = Max Fixture Thickness
Materials
SPRING TOGGLES
Ideal for ceiling installations A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. Product Code
Thread Drill Screw Ø Hole Ø Length
WFT
Qty
Boxes Installation Guide
TOG350 TOG550 TOG575 TOG5100 TOG675
M3 M5 M5 M5 M6
11 14 14 14 18
50 50 75 100 75
30 20 45 70 45
100 100 100 100 100
M5 M5
14 14
50 75
20 45
55 50
Bags TOG550B TOG575B
WFT = Wall and Fixture Thickness
66
CAVITY ANCHORS & SPEED PLUGS
PLASTERBOARD FIXINGS
METAL CAVITY ANCHORS
Materials
For a secure fixing into plasterboard
A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a setting tool is recommended. Installation Guide
SETTING TOOL A handy and efficient tool used to set cavity anchors. TIMco Code: SETOOL
Product Code
Screw ØxL
Drill Hole Ø
FCH Ø
Grip Board
Qty Product Code
Boxes 40038CA 40045CA 40060CA 50037CA 50052CA 50065CA 60052CA 60065CA
M4 x 45 M4 x 50 M4 x 65 M5 x 45 M5 x 60 M5 x 70 M6 x 60 M6 x 70
8 8 8 10 10 10 12 12
4 4 4 5 5 5 6 6
8-16 16-23 31-38 6-13 7-16 17-32 7-16 17-32
100 100 100 100 100 100 100 100
FCH = Fixture Clearance Hole
SPEED PLUGS
Light duty applications into plasterboard. Installation Guide
Materials
Screw ØxL
Drill Hole Ø
FCH Ø
Grip Board
Qty
10 10 12
5 5 6
6-13 7-16 17-32
70 60 40
10 10
5 5
6-13 7-16
4 3
Bags 50037CAB M5 x 45 50052CAB M5 x 60 60065CAB M6 x 70
Packs 50037CAP M5 x 45 50052CAP M5 x 60
A rapid light duty plasterboard fixing for use in a wide range of applications. Cross-recess head, allows simple installation with a screw driver. Metal plugs comes complete with screws.
METAL SPEED PLUGS With screws
NYLON SPEED PLUGS
Ideal for electrical installations
Product Code
Plug Length (mm)
Screw Ø x L (mm)
(mm)
31.5
4.5 x 30
6
300
31.5
4.5 x 30
6
100
31.5
4.5 x 30
6
75
31.5
4.5 x 30
6
5
MFT
Qty
Tubs TBAZST
Boxes TBAZS Product Code
Plug Length (mm)
Qty
TBAZSB
Packs
Boxes TBAN*
Bags
42
100
*6mm pre-drilled hole may be required in harder plasterboards.
TBAZSP
MFT = Max Fixture Thickness
67
CONCRETE & MASONRY ANCHORS 69 - PLASTIC PLUGS 69 - EXPRESS NAILS 69 - FLANGE CLIP 70 - CEILING ANCHORS 70 - NAIL IN ANCHORS 70 - WIRE HANGER ANCHORS 71 - INSULATION FIXINGS
72 - NYLON FIXINGS 73 - MULTI-FIX SCREWS 74 - MULTI-FIX BOLTS 75 - THROUGHBOLTS 75 - DROP IN ANCHORS 76 - SHIELD ANCHORS 77 - EYES & HOOKS
78 - THREADED BAR 78 - CHEMICAL STUDS 79 - MULTI-FIX RESIN 80 - GUNS 81 - RESIN ACCESSORIES
PLASTIC PLUGS & EXPRESS NAILS
PREMIUM PLASTIC PLUGS
CONCRETE & MASONRY ANCHORS
EXPRESS NAILS
Light duty general purpose anchor
Improved pull-out loads Materials An underestimated rapid hammer-set anchor for concrete and masonry, ideal for interior timber-work such as battens and frames. Large trade bags of premium plugs with improved pull-out loads when compared to standard plugs. Anti-rotation fins to prevent spinning. Loose and off the sprig for quicker and more convenient installation on site
Materials
Installation Guide Installation Guide 2 Hammer express
Product Code
Length Screw Ø Screw Colour Qty (mm) (Imp.) Ø (mm)
Bags RPLUGPREM Red BPLUGPREM Brown
34 42
6-10 10-14
3.5-4.8 1000 4.8-6.3 1000
PLASTIC PLUGS
nail through fixture into hole.
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 50 6 x 60 6 x 80 8 x 70 8 x 90 8 x 110 8 x 130 8 x 150 8 x 180
6 6 6 8 8 8 8 8 8
20 30 50 30 50 70 90 110 140
7 7 7 9 9 9 9 9 9
200 100 100 100 50 50 50 50 50
00660ENB 6 x 60 00680ENB 6 x 80 00890ENB 8 x 90 08110ENB 8 x 110 08150ENB 8 x 150
6 6 8 8 8
30 50 50 70 110
7 7 9 9 9
90 70 40 35 30
Product Code
Boxes 00650EN 00660EN 00680EN 00870EN 00890EN 08110EN 08130EN 08150EN 08180EN
Bags
All-purpose, cost effective fixing
VERTICAL FLANGE CLIP High strength fixing to steel Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. It may be beneficial to reduce drill diameter in soft materials. Length Screw Product Colour Code (mm) Ø (Imp.)
Screw Ø (mm)
Qty
3.0 - 4.5 3.5 - 5.0 4.5 - 6.0 6.0 - 8.0
100 100 100 40
Boxes YPLUG RPLUG BPLUG BLPLUG
Yellow Red Brown Blue
25 30 36 48
4-8 6 - 10 8 - 12 12 - 15
High strength vertical flange clip for fixing suspended wire and lighting to steel profiles. Product Code
Size (mm)
Qty
20 x 42
100
Bags VFC2042
69
CONCRETE & MASONRY ANCHORS
CEILING, NAIL IN & WIRE HANGER ANCHORS
CEILING ANCHORS
Materials
Ideal for brackets on suspended ceilings
A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. Made from steel making it ideal for overhead applications. Installation Guide
Product Code
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 40 6 x 65
6 6
5 30
6.5 6.5
100 100
Boxes 2 Push ceiling anchor into hole.
3 Hammer
wedge into anchor to secure.
0640CAM 0665CAM
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
NAIL IN ANCHORS
Materials
Light duty general purpose anchor
A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. Note: Not suitable for overhead applications. Installation Guide
Product Code
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 30 6 x 40 6 x 50 6 x 65
6 6 6 6
5 15 25 40
6.5 6.5 6.5 6.5
100 100 100 100
Boxes 0630ZNA 0640ZNA 0650ZNA 0665ZNA
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
WIRE HANGERS
Materials
Mainly for fixing lightweight ceilings
Specifically designed for use in the suspended ceiling industry when securing suspension wires to concrete beams.
Installation Guide
Product Code
ØxL
Drill Hole Ø
Eye Ø
Qty
6 x 60
6
6.3
100
Boxes 0660WH
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
70
INSULATION FIXINGS
CONCRETE & MASONRY ANCHORS
METAL INSULATION FIXINGS
LARGE METAL INSULATION DISC
Designed for fixing insulation
Specifically used with MIF.
Designed to anchor insulation material to concrete and masonry substrate materials.
Provides a larger surface area when using metal insulation fixings to hold lighter or softer insulation to masonry. Simply slide the fixing through, prior to installation.
Materials
Product Code
Head Ø (mm)
Hole Size Ø
Qty
80
5.0
50
Bags MID80
Installation Guide
METAL INSULATION DISC Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 60 8 x 90 8 x 110 8 x 140 8 x 170 8 x 200
8 8 8 8 8 8
10 40 60 90 120 150
100 100 100 100 50 50
Bags MIF60 MIF90 MIF110 MIF140 MIF170 MIF200
MFT = Max Fixture Thickness
PLASTIC INSULATION FIXINGS
Large diameter head for use with screws to hold insulation material to battens. Also used for ceiling crack repairs. Product Code
Head Ø (mm)
Hole Size Ø
Qty
35
5.0
100
Bags MID35
Designed for fixing insulation
PLASTIC COVER CAP FOR METAL INSULATION FIXINGS
Designed to anchor insulation material to concrete and masonry substrate materials. One piece impact resistant copolymer. Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 50 8 x 70 8 x 90 8 x 110 8 x 130
8 8 8 8 8
1-20 20-40 50-60 70-80 90-100
100 100 100 100 100
For aesthetics, where metal insulation fixing heads are left exposed after installation. Used for attaching insulation to timber..
Bags PIF50 PIF70 PIF90 PIF110 PIF130
Product Code
Head Ø (mm)
Qty
38
100
Bags MIFC
71
NYLON FIXINGS
CONCRETE & MASONRY ANCHORS
NYLON FIXINGS
Materials
Fixes multiple applications into masonry/brick. Installation Guide
Installation Guide
HAMMER FIXINGS
FRAME FIXINGS
A versatile and reliable fixing for attaching to brick, block, stone, masonry and concrete. Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 80 8 x 100 8 x 120 10 x 80 10 x 100 10 x 120 10 x 140 10 x 160
8 8 8 10 10 10 10 10
40 60 80 30 50 70 90 110
100 100 100 100 100 100 100 100
8 x 80 8 x 100 10 x 100 10 x 120 10 x 140 10 x 160
8 8 10 10 10 10
40 60 50 70 90 110
50 40 30 25 20 15
8 x 80 8 x 100 10 x 100 10 x 120 10 x 140 10 x 160
8 8 10 10 10 10
40 60 50 70 90 110
5 4 3 2 2 2
Boxes 08080NFF 08100NFF 08120NFF 10080NFF 10100NFF 10120NFF 10140NFF 10160NFF
Packs 08080NFFP 08100NFFP 10100NFFP 10120NFFP 10140NFFP 10160NFFP
FRAME ANCHORS
A traditional fixing for attaching doors and window frames to masonry. Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 100 8 x 120 8 x 140 10 x 100 10 x 120 10 x 140
8 8 8 10 10 10
50 70 90 50 70 90
100 100 100 100 100 100
Boxes 08100NFA 08120NFA 08140NFA 10100NFA 10120NFA 10140NFA
72
Product Code
ØxL
Drill Hole Ø
MFT
Qty
5 x 30 5 x 50 6 x 40 6 x 50 6 x 60 6 x 70 6 x 80 8 x 60 8 x 80 8 x 100 8 x 120 8 x 140
5 5 6 6 6 6 6 8 8 8 8 8
5 25 15 25 35 45 55 20 40 60 80 100
200 200 200 200 200 200 200 100 100 100 100 100
6 x 40 6 x 60 6 x 80 8 x 100
6 6 6 8
15 35 55 60
135 100 80 40
6 x 40 6 x 60 6 x 80 8 x 100
6 6 6 8
15 35 55 60
10 10 10 8
Boxes
Bags 08080NFFB 08100NFFB 10100NFFB 10120NFFB 10140NFFB 10160NFFB
A light duty hammer-set through fixing for masonry.
50030HF 50050HF 60040HF 60050HF 60060HF 60070HF 60080HF 80060HF 80080HF 80100HF 80120HF 80140HF
Bags 60040HFB 60060HFB 60080HFB 80100HFB
Packs 60040HFP 60060HFP 60080HFP 80100HFP
MULTI-FIX SCREWS
CONCRETE & MASONRY ANCHORS
MULTI-FIX SCREWS
Materials
Fixes into multiple materials Available in:
Installation Guide
Yellow
Zinc (CR3)
A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
CONCRETE SCREW -
CONCRETE SCREW -
Yellow
Countersunk with high/low start thread
FCH Qty Ø
Pan Head with high/low start thread
ØxL
Drill Hole Ø
MFT
7.5 x 40 7.5 x 50 7.5 x 60 7.5 x 70 7.5 x 80 7.5 x 90 7.5 x 100 7.5 x 110 7.5 x 120 7.5 x 130 7.5 x 150 7.5 x 180 7.5 x 200
6 6 6 6 6 6 6 6 6 6 6 6 6
5 15 25 35 30 40 50 60 70 80 100 130 150
8 8 8 8 8 8 8 8 8 8 8 8 8
100 100 100 100 100 100 100 100 100 100 100 100 100
7580MFPAN 7.5 x 80 75100MFPAN 7.5 x 100 75120MFPAN 7.5 x 120
00080TCONB 7.5 x 80 00100TCONB 7.5 x 100 00120TCONB 7.5 x 120 00200TCONB 7.5 x 150
6 6 6 6
30 50 70 150
8 8 8 8
65 55 45 30
Product Code
Product Code
Boxes 00040TCON 00050TCON 00060TCON 00070TCON 00080TCON 00090TCON 00100TCON 00110TCON 00120TCON 00130TCON 00150TCON 00180TCON 00200TCON
Zinc (CR3)
Product Code
ØxL
Drill Hole Ø
MFT
6 6 6
30 50 70
FCH Qty Ø
Boxes 8 8 8
MASONRY SCREW -
100 100 100
Zinc (CR3)
Countersunk
Bags
Packs 00080TCONP 7.5 x 80 00100TCONP 7.5 x 100 00120TCONP 7.5 x 120 00200TCONP 7.5 x 200
6 6 6 6
30 50 70 150
8 8 8 8
5 4 3 2
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 40 6 x 60 6 x 80 6 x 100
5 5 5 5
15 35 55 63
6.5 6.5 6.5 6.5
100 100 100 100
Boxes 640MFCSK 660MFCSK 680MFCSK 6100MFCSK
Cover Caps CAPW100 CAP0100 CAPM100
White Light Oak Mahogany
100 100 100
MASONRY SCREW -
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
MIXED PACK -
Yellow
Product Code
Size ØxL
Qty
Product Code
7.5 x 80 7.5 x 100 7.5 x 120 6 x 160 - SDS Drill Bit T30 TIM Driver Bit
100 100 100 1 1
640MFPAN 6 x 40 660MFPAN 6 x 60 680MFPAN 6 x 80 6100MFPAN 6 x 100
Boxed TCONPACK
Zinc (CR3)
Pan Head
Boxes
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
5 5 5 5
15 35 55 63
6.5 6.5 6.5 6.5
100 100 100 100
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
73
CONCRETE & MASONRY ANCHORS
MULTI-FIX BOLT
MULTI-FIX BOLT
Materials
Heavy duty non-expansion anchor Available in:
Exterior
This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors. Installation Guide Product Code
ØxL
Drill Hole Ø
6 x 50 6 x 75 6 x 100 6 x 130 6 x 150 8 x 60 8 x 75 8 x 100 8 x 130 8 x 150 10 x 60 10 x 75 10 x 100 10 x 130 10 x 150 12 x 75 12 x 100 12 x 130 12 x 150 12 x 200 16 x 100 16 x 150
6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 16 16
MFT
FCH Ø
Qty
20 45 55 85 105 20 35 60 90 110 10 25 50 80 100 15 40 70 90 140 20 70
8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14 18 18
100 100 100 100 75 100 100 50 50 50 50 50 50 50 25 50 25 25 25 25 10 10
Boxes MF650 MF675 MF6100 MF6130 MF6150 MF860 MF875 MF8100 MF8130 MF8150 MF1060 MF1075 MF10100 MF10130 MF10150 MF1275 MF12100 MF12130 MF12150 MF12200 MF16100 MF16150
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
MULTI-FIX BOLT - PAN HEAD
Product Code
ØxL
Drill MFT Hole Ø
FCH Ø
Qty
10 10 10 12 12 12
100 100 50 50 50 50
Boxes MF860P MF875P MF8100P MF1060P MF1075P MF10100P
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 50 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100 10 x 150 12 x 75 12 x 100 12 x 130 12 x 150
6 8 8 8 10 10 10 10 12 12 12 12
20 20 35 60 10 25 50 100 15 40 70 90
8 10 10 10 12 12 12 12 14 14 14 14
64 30 26 18 14 12 8 12 8 6 6 6
Bags MF650B MF860B MF875B MF8100B MF1060B MF1075B MF10100B MF10150B MF1275B MF12100B MF12130B MF12150B
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
MULTI-FIX BOLT - COUNTERSUNK
Product Code
ØxL
Drill MFT Hole Ø
FCH Ø
Qty
10 10 10 12 12 12
100 100 50 50 50 50
Boxes 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100
8 8 8 10 10 10
20 35 60 10 25 50
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
74
Product Code
MF860C MF875C MF8100C MF1060C MF1075C MF10100C
8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100
8 8 8 10 10 10
20 35 60 10 25 50
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
THROUGHBOLTS & DROP IN ANCHORS
CONCRETE & MASONRY ANCHORS
THROUGHBOLTS
DROP IN ANCHORS
Heavy duty applications into concrete
Materials
Materials
The versatile through fixing for use in a wide range of anchoring applications into concrete.
An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete.
Installation Guide
Installation Guide
Product Code
Thread ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
M8 x 50 M8 x 65 M8 x 80 M8 x 100 M8 x 130 M10 x 65 M10 x 75 M10 x 100 M10 x 120 M12 x 80 M12 x 100 M12 x 120 M12 x 140 M12 x 180 M16 x 105 M16 x 125 M16 x 150 M16 x 175 M20 x 130 M20 x 160 M20 x 215
8 8 8 8 8 10 10 10 10 12 12 12 12 12 16 16 16 16 20 20 20
5 10 25 45 75 5 10 35 55 5 25 45 65 105 5 20 45 70 5 30 85
9 9 9 9 9 12 12 12 12 14 14 14 14 14 18 18 18 18 22 22 22
100 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 15 15 10 10 8
M8 x 50 M10 x 100 M12 x 100 M12 x 120 M12 x 140
8 10 12 12 12
5 35 25 45 65
9 12 14 14 14
40 18 12 10 8
SETTING TOOL
M8 x 50 M10 x 100 M12 x 100 M12 x 140
8 10 12 12
5 35 25 65
9 12 14 14
4 2 2 2
Product Code
Boxes 0850TB 0865TB 0880TB 08100TB 08130TB 1065TB 1075TB 10100TB 10120TB 1280TB 12100TB 12120TB 12140TB 12180TB 16105TB 16125TB 16150TB 16175TB 20130TB 20160TB 20215TB
Product Code
Thread Drill Ø Hole Ø
Anchor Length
FCH Ø
Qty
25 30 40 50
8 10 12 14
100 100 50 50
Anchor Length
FCH Ø
Qty
30 30
10 12
100 50
Boxes 06WA 08WA 10WA 12WA
M6 M8 M10 M12
8 10 12 16
LIPPED
Product Code
Thread Drill Ø Hole Ø
Boxes 08LWA 1030LWA
M8 M10
10 12
Bags 0850TBB 10100TBB 12100TBB 12120TBB 12140TBB
Packs 0850TBP 10100TBP 12100TBP 12140TBP
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
To Fit Anchor Size
Qty
M6 M8 M10 M12
1 1 1 1
Boxes 06WAS 08WAS 10WAS 12WAS
75
SHIELD ANCHORS CONCRETE & MASONRY ANCHORS FORGED EYES & HOOKS
SHIELD ANCHORS Available in:
Materials
Yellow
Installation Guide A traditional metal expansion anchor designed for anchoring into masonry and concrete.
LOOSE BOLTS
PROJECTING BOLTS
A three segmented expansion anchor used in concrete, brick or stone. Grade 8.8. Thread ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
M6 x 50 M6 x 65 M8 x 60 M8 x 75 M8 x 90 M10 x 70 M10 x 85 M10 x 110 M10 x 135 M12 x 90 M12 x 105 M12 x 120 M12 x 140 M16 x 135 M16 x 165
12 12 14 14 14 16 16 16 16 20 20 20 20 24 24
10 25 10 25 40 10 25 50 75 10 25 40 60 30 60
8 8 10 10 10 12 12 12 12 14 14 14 14 18 18
100 50 50 50 25 25 25 25 25 10 10 10 10 10 10
0610LSHB M6 x 50 0625LSHB M6 x 65 0810LSHB M8 x 60 0825LSHB M8 x 75 0840LSHB M8 x 90 1010LSHB M10 x 70 1025LSHB M10 x 85 1050LSHB M10 x 110 1075LSHB M10 x 135 1260LSHB M12 x 140
12 12 14 14 14 16 16 16 16 20
10 25 10 25 40 10 25 50 75 60
8 8 10 10 10 12 12 12 12 14
48 46 26 24 22 22 16 14 14 10
12 12 14 14 14 16 16 16 16 20
10 25 10 25 40 10 25 50 75 60
8 8 10 10 10 12 12 12 12 14
4 4 4 4 4 4 2 2 2 2
Product Code
Boxes 0610LSH 0625LSH 0810LSH 0825LSH 0840LSH 1010LSH 1025LSH 1050LSH 1075LSH 1210LSH 1225LSH 1240LSH 1260LSH 1630LSH 1660LSH
Bags
Packs 0610LSHP M6 x 50 0625LSHP M6 x 65 0810LSHP M8 x 60 0825LSHP M8 x 75 0840LSHP M8 x 90 1010LSHP M10 x 70 1025LSHP M10 x 85 1050LSHP M10 x 110 1075LSHP M10 x 135 1260LSHP M12 x 140
76
A three segmented expansion anchor used in concrete, brick or stone. Grade 5.8. Thread ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
M6 x 110 M8 x 70 M8 x 85 M8 x 120 M10 x 85 M10 x 100 M10 x 130 M12 x 105 M12 x 120 M12 x 165
12 14 14 14 16 16 16 20 20 20
60 10 25 60 15 30 60 15 30 75
8 10 10 10 12 12 12 14 14 14
50 50 50 50 25 25 25 10 10 10
0825PSHB M8 x 85 0860PSHB M8 x 120 1015PSHB M10 x 85 1030PSHB M10 x 100 1060PSHB M10 x 130 1230PSHB M12 x 120
14 14 16 16 16 20
25 60 15 30 60 30
10 10 12 12 12 14
26 22 16 15 14 8
14 14 16 16 16 20
25 60 15 30 60 30
10 10 12 12 12 14
4 4 2 2 2 2
Product Code
Boxes 0660PSH 0810PSH 0825PSH 0860PSH 1015PSH 1030PSH 1060PSH 1215PSH 1230PSH 1275PSH
Bags
Packs 0825PSHP M8 x 85 0860PSHP M8 x 120 1015PSHP M10 x 85 1030PSHP M10 x 100 1060PSHP M10 x 130 1230PSHP M12 x 120
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
FORGED EYES & HOOKS INSULATION THROUGHBOLTS FIXINGS
CONCRETE & MASONRY ANCHORS
FORGED EYES & HOOKS Available in:
Materials
Yellow
FORGED EYES
FORGED EYES WITH SHIELDS
A useful threaded eye bolt for attaching ropes or cables.
Complete with three segment shield anchors, a forged eye for extra strength.
Product Code
Product Code
Thread Ø
Thread Length
Eye Ø
Qty
M6 M8 M10 M12
50 60 73 95
8 10 12 16
50 50 50 25
Boxes 06EYE 08EYE 10EYE 12EYE
Thread Ø
Thread Length
Eye Ø
Qty
M6 M8
50 60
8 10
18 14
M6 M8
50 60
8 10
2 2
Bags 06EYEB 08EYEB
Packs 06EYEP 08EYEP
FORGED HOOKS
FORGED HOOKS WITH SHIELDS
A useful threaded hook bolt for attaching ropes or cables.
A useful threaded hook bolt with shield for attaching ropes or cables.
Product Code
Product Code
Thread Ø
Thread Length
Qty
M6 M8 M10 M12
50 60 73 90
50 50 50 25
Boxes 06HOOK 08HOOK 10HOOK 12HOOK
Thread Ø
Thread Length
Qty
M6 M8
50 60
20 16
06HOOKP 08HOOKP
M6 M8
50 60
2 2
Product Code
Thread Ø
Shield Length
Qty
M6 M8 M10 M12
45 50 60 75
50 50 50 25
Bags
SHIELD ONLY
06HOOKB 08HOOKB
Packs
Boxes
A three segmented expansion anchor used in concrete, brick or stone with most types of metric threaded component.
06SH 08SH 10SH 12SH
77
CONCRETE & MASONRY ANCHORS
THREADED BAR & ANCHOR STUDS
THREADED BAR
HIGH TENSILE THREADED BAR - Used with drop in anchors
Available in:
Available in:
Used with drop in anchors Zinc
A2/Aust.SS
Zinc
1 METER LENGTHS Product Code
A versatile fully threaded bar used for hanging, connecting or fixing.
1 METER LENGTHS Product Code
Thread x Length (mm)
Qty
Thread x Length
Qty
(mm)
Packs M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000
06TBZHT 08TBZHT 10TBZHT 12TBZHT 16TBZHT 20TBZHT
10 10 10 10 10 5
Packs 06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ
M6 x 1,000 M8 x 1,000 M10 x 1,000 M12 x 1,000 M16 x 1,000 M20 x 1,000
10 10 10 10 10 5
CHEMICAL ANCHOR STUDS Used with Multi-Fix resin Available in:
Zinc
Galv
SHORTER LENGTHS (300mm) Product Code
Thread x Length (mm)
Qty
Packs 06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ
M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300
THREADED BAR -
External hex drive. Can be used with Multi-Fix resin. Embedment depth mark. Zinc plated and passivated (3-5 microns) or hot dipped galvanised finishes. Chisel point prevents the rod turning when tightening. *Chisel point nut setter included.
10 10 10 10 10
CHEMICAL ANCHOR STUDS -
A2/Aust.SS
Product Code
1 METER LENGTHS Product Code
Thread x Length (mm)
Qty
Packs (1000mm) 06TBSS 08TBSS 10TBSS 12TBSS 16TBSS 20TBSS
M6 x 1000mm M8 x 1000mm M10 x 1000mm M12 x 1000mm M16 x 1000mm M20 x 1000mm
5 5 5 5 5 5
Thread Ø x Length
MFT
M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270
13 20 25 35 55
Zinc
Clearance Qty Hole Ø
Boxes 08110CS 10130CS 12160CS 16190CS 20270CS
10 12 14 18 24
10 10 10 10 4
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
CHEMICAL ANCHOR STUDS Product Code
Thread Ø x Length
MFT
M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270
13 20 25 35 55
Galv
Clearance Qty Hole Ø
Boxes 08110CSG 10130CSG 12160CSG 16190CSG 20270CSG
10 12 14 18 24
10 10 10 10 4
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
78
MULTI-FIX RESIN
CONCRETE & MASONRY ANCHORS
MULTI-FIX RESIN Multi-Fix resin range offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.
Materials
VINYLESTER STYRENE FREE
FIRE RATED R240
1501537
European Technically Approved (ETA) low odour resin to be used in safety critical fixing. For enclosed, poorly ventilated, damp and wet environments. This high performance resin will give consistent results in a wide range of environments and conditions, whilst offering exceptional tensile strength.
Product Code
410ml
ETA / CE
Materials
Product Code
Size
Approval
300ml
ETA / CE
Singles PESF310
(Not suitable in concrete that is or may become damp).
Materials
POLYESTER RESIN
Product Code
An economic resin ideal for day to day non-safety critical applications that are well ventilated at the time of installation.
Approval
Singles VESF410
POLYESTER STYRENE FREE RESIN
European Technically Approved (ETA) low odour resin, for day to day non-safety critical fixing. For enclosed or poorly ventilated environments.
Size
Size
Approval
300ml 410ml
N/A N/A
Singles PE310 PE410
(Not suitable in concrete that is or may become damp).
79
CONCRETE & MASONRY ANCHORS
SEALANT & RESIN GUNS
SEALANT & RESIN GUNS A range of guns used with syringe type cartridge for dispensing sealants, caulk, chemical resins and adhesives.
RESIN GUN
A 64mm heavy duty resin applicator gun with twin 5mm gripper plates providing four point contact with the plunger rod. There is also a non-drip mechanism. Product Code
Description
Max Cartridge Dia (mm)
Chemical Resin Tool - 410ml
64
Singles RESINGUN
PROFESSIONAL GUN
A 48mm heavy duty sealant and caulking gun with a convenient hook end for hanging. Ergonomically designed for ease of use and a swivel action barrel for easy application into tight corners. Patented non-drip mechanism. Product Code
Description
Max Cartridge Dia (mm)
Professional Gun - 310ml
48
Singles PROGUN
SKELETON GUN
A 48mm gun for dispensing sealants, caulk and adhesives from standard syringe type cartridges. It has strengthened side plates and a 6mm gripper plate with a convenient hook end for hanging. The front cap is riveted for reinforcement and the gun comes with an integrated cleaning pin. Product Code
Description
Max Cartridge Dia (mm)
Skeleton Gun
48
Singles SKELGUN
MULTI-FIX RESIN ACCESSORY CASE Ideal for on-site storage to keep your cartridges and ancillaries safe and in one place. Product Code
To Fit
Case MFCASE300 MFCASE410
80
300ml 410ml
• 1x Resin Gun • 3x Hole Cleaning Brushes • 6x Mixer Nozzles • 4x Nylon Sleeves • 1x 190mm Blow Pump
RESIN ACCESSORIES
CONCRETE & MASONRY ANCHORS
RESIN ACCESSORIES The cleaning of drill holes prior to injecting resin is essential in order to ensure a safe fixing. Our range of accessories include the tools required to ensure effective hole cleaning. Nylon Sleeves assist with fixing into hollow block or brick and spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be used for subsequent applications.
MIXING NOZZLES
Product Code
BLOW-OUT PUMP
Description
Qty
Product Code
Nozzle
12
PUMP
Bags
Singles
TNOZ
PLASTIC SLEEVES
Product Code
Thread Ø x L (mm)
M8 - M10 M8 - M10
Socket Hole Ø Qty Ø x L (mm) (mm)
16 x 85 16 x 130
280
HOLE CLEANING BRUSHES
Bags 1585CPS 15130CPS
Size (mm)
16 16
100 100
Product Code
Size (mm)
Qty
13 15 22
10 10 10
Bags B13 B15 B22
INTERNALLY THREADED SOCKETS Zinc
Product Code
Thread Ø x L (mm)
Socket Ø x L (mm)
Hole Ø
M10 x 25
14 x 80
16
(mm)
Qty
Boxes 10ITS
50
81
COLLATED & LOOSE NAILS 83 - CLIPPED HEAD NAILS 84 - BRAD NAILS 85 - FUEL CELLS 85 - POLYMER HEADED
86 - BRIGHT NAILS 89 - GALVANISED NAILS 92 - SHERARDISED NAILS 93 - ALUMINIUM NAILS
94 - COPPER NAILS 94 - COPPER DISC RIVETS 95 - STAINLESS STEEL NAILS 96 - MASONRY NAILS
CLIPPED HEAD COLLATED NAILS
COLLATED & LOOSE NAILS
FIRMAHOLD CLIPPED HEAD NAILS For structural applications
To BS
Available in: Bright
FirmaGalv
FirmaGalv+
Hot Dipped
EN ISO
14592:2
008
A2/Aust. SS
Tested by
*
For use in structural applications using high quality paper collation for reduced nail jams. Various levels of rust protection to comply with building regulation and meet with all service classes.
CLIPPED HEAD - GAS Product Code
Dia.
Length
Coating Type
CLIPPED HEAD - GAS Shank Type
Product Code
Boxes of 3,300 & 3 Fuel Cells
Dia.
Length
Coating Type
Shank Type
Boxes of 3,300
CBRT50G
2.8
50
Bright
Ringed
CBRT50
2.8
50
Bright
Ringed
CFGT50G
2.8
50
FirmaGalv
Ringed
CFGT50
2.8
50
FirmaGalv
Ringed
CPLT50G
2.8
50
FirmaGalv +
Ringed
CPLT50
2.8
50
FirmaGalv +
Ringed
CHDT50G
2.8
50
HDGV
Ringed
CHDT50
2.8
50
HDGV
Ringed
CBRT63G
2.8
63
Bright
Ringed
CBRT63
2.8
63
Bright
Ringed
CFGT63G
2.8
63
FirmaGalv
Ringed
CFGT63
2.8
63
FirmaGalv
Ringed Ringed
CPLT63G
2.8
63
FirmaGalv +
Ringed
CPLT63
2.8
63
FirmaGalv +
CHDT63G
2.8
63
HDGV
Ringed
CHDT63
2.8
6.3
HDGV
Ringed
CPLT63RG
3.1
63
FirmaGalv +
Ringed
CPLT63R
3.1
63
FirmaGalv +
Ringed
Boxes of 2,200 & 2 Fuel Cells
Boxes of 2,200
CBRT75G
3.1
75
Bright
Ringed
CBRT75
3.1
75
Bright
Ringed
CFGT75G
3.1
75
FirmaGalv
Ringed
CFGT75
3.1
75
FirmaGalv
Ringed
CPLT75G
3.1
75
FirmaGalv +
Ringed
CPLT75
3.1
75
FirmaGalv +
Ringed
CHDT75G
3.1
75
HDGV
Ringed
CHDT75
3.1
75
HDGV
Ringed
CFGT85PG
3.1
85
FirmaGalv
Part Ring
CBRT90
3.1
90
Bright
Plain
CBRT90G
3.1
90
Bright
Plain
CFGT90
3.1
90
FirmaGalv
Plain
CFGT90G
3.1
90
FirmaGalv
Plain
CPLT90
3.1
90
FirmaGalv +
Plain
CPLT90G
3.1
90
FirmaGalv +
Plain
CHDT90
3.1
90
HDGV
Plain
CHDT90G
3.1
90
HDGV
Plain
CPLT90PG
3.1
90
FirmaGalv +
Part Ring
Boxes of 1,100 & 1 Fuel Cell
Boxes of 1,100 CFGR50
2.8
50
FirmaGalv
Ringed
CSSR50
2.8
50
A2 SS
Ringed
CFGR50G
2.8
50
FirmaGalv
Ringed
CFGR63
2.8
63
FirmaGalv
Ringed
CFGR63G
2.8
63
FirmaGalv
Ringed
CSSR63
2.8
63
A2 SS
Ringed
CFGR75G
3.1
75
FirmaGalv
Ringed
CFGR75
3.1
75
FirmaGalv
Ringed
CFGR90G
3.1
90
FirmaGalv
Plain
CFGR90
3.1
90
FirmaGalv
Plain
CPLR63RG
3.1
63
FirmaGalv+
Ringed
CSSR50G
2.8
50
A2 SS
Ringed
CSSR63G
2.8
63
A2 SS
Ringed
*Notified Test Laboratory 2389 for EN 14592 Timber Structures - Dowel Type Fasteners - Requirements
83
COLLATED BRAD NAILS
COLLATED & LOOSE NAILS
FIRMAHOLD BRAD NAILS Perfect for indoor use Galv.
Available in:
A2/Aust. SS
Ideal for internal applications such as skirting, architrave, tongue and groove fixing, with a T head for a concealed finish. Also available in stainless steel for hardwood applications.
16 GAUGE STRAIGHT BRADS - GAS Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 & 2 Fuel Cells BG1619G BG1625G BG1632G BG1638G BG1645G BG1650G BG1664G BSS1638G BSS1650G
16 16 16 16 16 16 16 16 16
19 25 32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50 50 50
16 GAUGE STRAIGHT BRADS - GAS Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 BG1619 BG1625 BG1632 BG1638 BG1645 BG1650 BG1664 BSS1638 BSS1650
16 16 16 16 16 16 16 16 16
19 25 32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50 50 50
18 GAUGE STRAIGHT BRADS - GAS Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 5,000 BG1816 BG1819 BG1825 BG1832 BG1838 BG1845 BG1850
84
18 18 18 18 18 18 18
16 19 25 32 38 45 50
Galv. Galv. Galv. Galv. Galv. Galv. Galv.
100 100 100 100 100 100 100
16 GAUGE ANGLED BRADS - GAS Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 & 2 Fuel Cells ABG1632G ABG1638G ABG1645G ABG1650G ABG1664G ABSS1638G ABSS1650G
16 16 16 16 16 16 16
32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50
16 GAUGE ANGLED BRADS - GAS Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 ABG1632 ABG1638 ABG1645 ABG1650 ABG1664 ABSS1638 ABSS1650
16 16 16 16 16 16 16
32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50
FUEL CELLS & POLYMER HEADED NAILS
COLLATED & LOOSE NAILS
FUEL CELLS
For use with framing & finishing nail guns Manufactured to European standards. Cleaned propane and butane gas for improved the working environment. Fully synthetic oil for reduced carbon deposition. High quality propellant to prevent leakage and increase shelf life. Gas filled in accordance with European Regulations (75/324/EWG).
Description
Size (ml)
Qty
Framing Nailer Fuel Cell Finishing Nailer Fuel Cell
80 30
2 2
Product Code
Packs CFC BFC
CFC
BFC
POLYMER HEADED NAILS & PINS Available in:
White
Oak
Mahogany
Black
A4 SS
A coloured poly headed marine grade stainless steel pin or nail designed to secure fascia, soffit and window boards.
POLYMER HEADED NAILS
Product Code
Finish
POLYMER HEADED PINS
Size
Head Ø
(mm)
(mm)
Box Qty
Product Code
40 50 50 50 50 65 65 65
12 12 12 12 12 12 12 12
100 100 100 100 100 100 100 100
PP25M PP25W PP25BEIGE PP30W PP30O PP30BR PP30BL PP40W PP40O PP40BR PP40BL
Boxes PN40W PN50W PN50O PN50BR PN50BL PN65W PN65BR PN65BL
Size
Head Ø
(mm)
(mm)
Box Qty
25 25 25 30 30 30 30 40 40 40 40
6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4
250 250 250 250 250 250 250 250 250 250 250
Boxes White White Oak Mahogany Black White Mahogany Black
CLAD PINS
Product Code
Finish
Size
Shank Ø
Head Ø
(mm)
(mm)
(mm)
Box Qty
30
2.1
4
250
Mahogany White Beige White Oak Mahogany Black White Oak Mahogany Black
Boxes CP30
85
BRIGHT LOOSE NAILS
COLLATED & LOOSE NAILS
BRIGHT LOOSE NAILS Bright loose nails covering all aspects of internal uses. Available in a wide variety of packaging options to suit any job size.
ANNULAR RINGSHANK
PANEL PINS
Annular rings provide additional holding power, where additional grip is required.
A light weight nail, commonly used for cabinet making and light duty applications.
Product Code
Product Code
For additional strength
Length (mm)
Shank Dia. (mm)
For light duty applications
Qty
Packs BAR25P BAR50P BAR65P
25 50 65
2.00 2.65 3.35
150 50 30
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
500g 500g 500g 500g 500g 500g 500g
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
1kg 1kg 1kg 1kg 1kg 1kg 1kg
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
500g Bags BAR20MB BAR25MB BAR30MB BAR40MB BAR50MB BAR65MB BAR75MB
1kg Bags BAR20B BAR25B BAR30B BAR40B BAR50B BAR65B BAR75B
2.5kg Bags BAR20LB BAR25LB BAR30LB BAR40LB BAR50LB BAR65LB BAR75LB
2.5kg Tubs BAR20T BAR25T BAR30T BAR40T BAR50T BAR65T BAR75T
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
25kg 25kg 25kg 25kg 25kg 25kg 25kg
25kg Boxes BAR20 BAR25 BAR30 BAR40 BAR50 BAR65 BAR75
86
(mm)
Shank Dia. (mm)
Qty
25 30 40 50
1.60 1.60 1.60 1.60
250 200 100 50
25 30 40 50
1.60 1.60 1.60 1.60
500g 500g 500g 500g
25 30 40 50
1.60 1.60 1.60 1.60
1kg 1kg 1kg 1kg
25 30 40 50
1.60 1.60 1.60 1.60
2.5kg 2.5kg 2.5kg 2.5kg
25 30 40 50
1.60 1.60 1.60 1.60
2.5kg 2.5kg 2.5kg 2.5kg
25 30 40 50
1.60 1.60 1.60 1.60
25kg 25kg 25kg 25kg
Length
Packs PPB25P PPB30P PPB40P PPB50P
500g Bags BPP25MB BPP30MB BPP40MB BPP50MB
1kg Bags BPP25B BPP30B BPP40B BPP50B
2.5kg Bags BPP25LB BPP30LB BPP40LB BPP50LB
2.5kg Tubs BPP25T BPP30T BPP40T BPP50T
25kg Boxes BPP25 BPP30 BPP40 BPP50
BRIGHT LOOSE NAILS
COLLATED & LOOSE NAILS
ROUND WIRE
OVAL NAILS
General use with full round head for clamping.
Oval head for a concealed finish.
General purpose nail
Product Code
Where appearance is important
(mm)
Shank Dia. (mm)
Qty
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
500g 500g 500g 500g 500g 500g 500g
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
1kg 1kg 1kg 1kg 1kg 1kg 1kg
Length
500g Bags BRW40MB BRW50MB BRW65MB BRW75MB BRW100MB BRW125MB BRW150MB
1kg Bags BRW40B BRW50B BRW65B BRW75B BRW100B BRW125B BRW150B
2.5kg Bags BRW40LB BRW50LB BRW65LB BRW75LB BRW100LB BRW125LB BRW150LB
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100
2.65 2.65 3.35 3.75 4.50
10kg 10kg 10kg 10kg 10kg
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
25kg 25kg 25kg 25kg 25kg 25kg 25kg
2.5kg Tubs BRW40T BRW50T BRW65T BRW75T BRW100T BRW125T BRW150T
10kg Tubs BRW40LT BRW50LT BRW65LT BRW75LT BRW100LT
25kg Boxes BRW40 BRW50 BRW65 BRW75 BRW100 BRW125 BRW150
Product Code
Length (mm)
Qty
500g Bags BON40MB BON50MB BON65MB BON75MB BON100MB
40 50 65 75 100
500g 500g 500g 500g 500g
40 50 65 75 100
1kg 1kg 1kg 1kg 1kg
40 50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100
25kg 25kg 25kg 25kg 25kg
1kg Bags BON40B BON50B BON65B BON75B BON100B
2.5kg Bags BON40LB BON50LB BON65LB BON75LB BON100LB
2.5kg Tubs BON40T BON50T BON65T BON75T BON100T
25kg Boxes BON40 BON50 BON65 BON75 BON100
87
BRIGHT LOOSE NAILS
COLLATED & LOOSE NAILS
ROUND LOST HEAD
CUT FLOORING BRADS
For second fix applications, where the head can be punched below the surface for a concealed finish.
A traditional nail used for fixing floor boards.
For a concealed finish
Perfect for floor boards
Product Code
Length (mm)
Qty
500g Bags CFB50MB CFB65MB
50 65
500g 500g
50 65
1kg 1kg
50 65
2.5kg 2.5kg
50 65
2.5kg 2.5kg
50 65
25kg 25kg
1kg Bags CFB50B CFB65B
2.5kg Bags CFB50LB CFB65LB
2.5kg Tubs CFB50T CFB65T
25kg Boxes CFB50 CFB65
CUT CLASP NAILS Product Code
(mm)
Shank Dia. (mm)
Qty
40 50 65
2.36 3.00 3.35
500g 500g 500g
40 50 65
2.36 3.00 3.35
1kg 1kg 1kg
40 50 65
2.36 3.00 3.35
2.5kg 2.5kg 2.5kg
Length
A traditional nail
500g Bags BLH40MB BLH50MB BLH65MB
1kg Bags BLH40B BLH50B BLH65B
2.5kg Bags BLH40LB BLH50LB BLH65LB
2.5kg Tubs BLH40T BLH50T BLH65T
40 50 65
2.36 3.00 3.35
2.5kg 2.5kg 2.5kg
25kg Boxes BLH40 BLH50 BLH65
40 50 65
2.36 3.00 3.35
25kg 25kg 25kg
Cut clasps nails provide a more traditional fixing into timber. Product Code
Length (mm)
Qty
500g Bags BCN50MB BCN65MB BCN75MB BCN100MB
50 65 75 100
500g 500g 500g 500g
50 65 75 100
1kg 1kg 1kg 1kg
50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100
25kg 25kg 25kg 25kg
1kg Bags BCN50B BCN65B BCN75B BCN100B
2.5kg Bags BCN50LB BCN65LB BCN75LB BCN100LB
2.5kg Tubs BCN50T BCN65T BCN75T BCN100T
25kg Boxes BCN50 BCN65 BCN75 BCN100
88
GALVANISED LOOSE NAILS
COLLATED & LOOSE NAILS
GALVANISED LOOSE NAILS Mechanically galvanised for external use covering a wide variety of applications. Available in a wide variety of packaging options to suit any job size.
SQUARE TWIST
ELH CLOUT
For use with joist hangers
Extra large head
For use with all types of builders metal work. Product Code
Length (mm)
Shank Dia. (mm)
Qty
Product Code
500g Bags GST30MB GST40MB
30 40
3.75 3.75
500g 500g
30 40
3.75 3.75
1kg 1kg
30 40
3.75 3.75
2.5kg 2.5kg
30 40
3.75 3.75
2.5kg 2.5kg
30
3.75
10kg
1kg Bags GST30B GST40B
2.5kg Bags GST30LB GST40LB
2.5kg Tubs GST30T GST40T
10kg Tubs GST30LT
25kg Boxes GST30 GST40
30 40
3.75 3.75
25kg 25kg
SLAB NAILS
For fixing insulation slabs to wood.
Product Code
(mm)
Shank Dia. (mm)
Qty
100 125 150 180 200
82 71 60 38 36
500g 500g 500g 500g 500g
100 125 150 180 200
82 71 60 38 36
1kg 1kg 1kg 1kg 1kg
100 125 150 180 200
82 71 60 38 36
10kg 10kg 10kg 10kg 10kg
Length
500g Bags SLN100MB SLN125MB SLN150MB SLN180MB SLN200MB
1kg Bags SLN100B SLN125B SLN150B SLN180B SLN200B
10kg Boxes SLN100 SLN125 SLN150 SLN180 SLN200
Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. (mm)
Shank Dia. (mm)
Qty
30 40 50
3.00 3.00 3.00
100 75 50
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
500g 500g 500g 500g 500g 500g
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
1kg 1kg 1kg 1kg 1kg 1kg
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
13 20
3.00 3.00
10kg 10kg
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
25kg 25kg 25kg 25kg 25kg 25kg
Length
Packs GEC30P GEC40P GEC50P
500g Bags GEC13MB GEC20MB GEC25MB GEC30MB GEC40MB GEC50MB
1kg Bags GEC13B GEC20B GEC25B GEC30B GEC40B GEC50B
2.5kg Bags GEC13LB GEC20LB GEC25LB GEC30LB GEC40LB GEC50LB
2.5kg Tubs GEC13T GEC20T GEC25T GEC30T GEC40T GEC50T
10kg Tubs GEC13LT GEC20LT
25kg Boxes GEC13 GEC20 GEC25 GEC30 GEC40 GEC50
89
GALVANISED LOOSE NAILS
COLLATED & LOOSE NAILS
CLOUT
ROUND WIRE
Perfect for roofing applications.
General use with full round head for clamping.
General purpose nail
Product Code
Packs
GCN30P GCN40P GCN50P GCN75P
500g Bags
GCN25MB GCN30MB GCN40MB GCN33540MB GCN50MB GCN33550MB GCN26565MB GCN65MB GCN75MB
1kg Bags
GCN25B GCN30B GCN40B GCN33540B GCN50B GCN33550B GCN26565B GCN65B GCN75B
2.5kg Bags
GCN25LB GCN30LB GCN40LB GCN33540LB GCN50LB GCN33550LB GCN26565LB GCN65LB GCN75LB
2.5kg Tubs
GCN25T GCN30T GCN40T GCN33540T GCN50T GCN33550T GCN26565T GCN65T GCN75T
10kg Tubs
GCN30LT GCN40LT
25kg Boxes
GCN25 GCN30 GCN40 GCN33540 GCN50 GCN33550 GCN26565 GCN65 GCN75
90
General purpose nail
(mm)
Shank Dia. (mm)
Qty
30 40 50 75
2.65 2.65 2.65 3.75
125 100 50 25
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
500g 500g 500g 500g 500g 500g 500g 500g 500g
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
30 40
2.65 2.65
10kg 10kg
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg
Length
Product Code
Packs
GRW40P GRW50P GRW65P GRW75P GRW100P GRW125P GRW150P
500g Bags
GRW40MB GRW50MB GRW26565MB GRW65MB GRW75MB GRW100MB GRW125MB GRW150MB
1kg Bags
GRW40B GRW50B GRW26565B GRW65B GRW75B GRW100B GRW125B GRW150B
2.5kg Bags
GRW40LB GRW50LB GRW26565LB GRW65LB GRW75LB GRW100LB GRW125LB GRW150LB
2.5kg Tubs
GRW40T GRW50T GRW26565T GRW65T GRW75T GRW100T GRW125T GRW150T
10kg Tubs
GRW40LT GRW50LT GRW26565LT GRW65LT GRW75LT GRW100LT
25kg Boxes
GRW40 GRW50 GRW26565 GRW65 GRW75 GRW100 GRW125 GRW150
(mm)
Shank Dia. (mm)
Qty
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
75 50 40 25 15 10 8
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
500g 500g 500g 500g 500g 500g 500g 500g
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 65 75 100
2.65 2.65 2.65 3.35 3.75 4.50
10kg 10kg 10kg 10kg 10kg 10kg
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg
Length
GALVANISED LOOSE NAILS JAGGED PLASTERBOARD For fixing plasterboard
Product Code
500g Bags
JPN30MB JPN40MB
1kg Bags
JPN30B JPN40B
2.5kg Bags
JPN30LB JPN40LB
2.5kg Tubs
JPN30T JPN40T
25kg Boxes
JPN30 JPN40
Length (mm)
Traditional alternative to the drywall screw.
Shank Dia. (mm)
Qty
30 40
2.65 2.65
500g 500g
30 40
2.65 2.65
1kg 1kg
30 40
2.65 2.65
2.5kg 2.5kg
30 40
2.65 2.65
2.5kg 2.5kg
30 40
2.65 2.65
25kg 25kg
COLLATED & LOOSE NAILS
PRESSER POINT STAPLES For fencing applications
Used for fixing fencing and wire mesh. Product Code
Packs
PPS20P PPS25P PPS30P PPS40P
500g Bags
PPS20MB PPS25MB PPS30MB PPS40MB PPS50MB
1kg Bags
PPS20B PPS25B PPS30B PPS40B PPS50B
2.5kg Bags
DRIVE SCREW
For roofing applications
Fixing roofing and cladding sheets to timber purlins.
PPS20LB PPS25LB PPS30LB PPS40LB PPS50LB
2.5kg Tubs
Product Code
500g Bags
DSN50MB DSN65MB DSN75MB DSN100MB DSN125MB DSN150MB
1kg Bags
DSN50B DSN65B DSN75B DSN100B DSN125B DSN150B
2.5kg Bags
DSN50LB DSN65LB DSN75LB DSN100LB DSN125LB DSN150LB
2.5kg Tubs
DSN50T DSN65T DSN75T DSN100T DSN125T DSN150T
25kg Boxes
DSN50 DSN65 DSN75 DSN100 DSN125 DSN150
(mm)
Shank Dia. (mm)
Qty
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
500g 500g 500g 500g 500g 500g
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
1kg 1kg 1kg 1kg 1kg 1kg
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
25kg 25kg 25kg 25kg 25kg 25kg
Length
PPS20T PPS25T PPS30T PPS40T PPS50T
25kg Boxes
PPS20 PPS25 PPS30 PPS40 PPS50
(mm)
Shank Dia. (mm)
Qty
20 25 30 40
2.00 2.65 3.35 4.00
75 60 30 20
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
500g 500g 500g 500g 500g
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
1kg 1kg 1kg 1kg 1kg
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
25kg 25kg 25kg 25kg 25kg
Length
SPRING HEAD
For fixing corrugated sheeting
Twisted shank gives a very strong purchase. Product Code
500g Bags
GSN65MB
1kg Bags
GSN65B
2.5kg Bags
GSN65LB
2.5kg Tubs
GSN65T
10kg Boxes
GSN65
(mm)
Shank Dia. (mm)
Qty
65
3.35
500g
65
3.35
1kg
65
3.35
2.5kg
65
3.35
2.5kg
65
3.35
10kg
Length
91
SHERARDISED LOOSE NAILS
COLLATED & LOOSE NAILS
SHERARDISED NAILS For medium duty rust protection. Available in a wide variety of packaging options to suit any job size.
ANNULAR RINGSHANK
PANEL PINS
For additional strength
For light duty applications
Annular rings provide additional holding power, where additional grip is required.
A light weight nail, commonly used for cabinet making and light duty applications.
Product Code
Product Code
Length (mm)
Shank Dia. (mm)
Qty
500g Bags
500g Bags SAR40MB SAR50MB SAR65MB SAR75MB SAR100MB
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
500g 500g 500g 500g 500g
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
1kg 1kg 1kg 1kg 1kg
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
1kg Bags SAR40B SAR50B SAR65B SAR75B SAR100B
2.5kg Bags SAR40LB SAR50LB SAR65LB SAR75LB SAR100LB
2.5kg Tubs SAR40T SAR50T SAR65T SAR75T SAR100T
25kg Boxes SAR40 SAR50 SAR65 SAR75 SAR100
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
25kg 25kg 25kg 25kg 25kg
SPP25MB SPP30MB SPP40MB SPP50MB
1kg Bags
SPP25B SPP30B SPP40B SPP50B
25kg Boxes
SPP25 SPP30 SPP40 SPP50
Shank Dia. (mm)
Qty
25 30 40 50
1.60 1.60 1.60 2.00
500g 500g 500g 500g
25 30 40 50
1.60 1.60 1.60 2.00
1kg 1kg 1kg 1kg
25 30 40 50
1.60 1.60 1.60 2.00
25kg 25kg 25kg 25kg
SQUARE TWIST For use with joist hangers
For use with all types of builders metal work. Product Code
500g Bags
SST30MB SST40MB
1kg Bags
SST30B SST40B
2.5kg Bags
SST30LB SST40LB
2.5kg Tubs
SST30T SST40T
10kg Tubs
SST30LT SST40LT
25kg Boxes
SST30 SST40
92
(mm)
Length
(mm)
Shank Dia. (mm)
Qty
30 40
3.75 3.75
500g 500g
30 40
3.75 3.75
1kg 1kg
30 40
3.75 3.75
2.5kg 2.5kg
30 40
3.75 3.75
2.5kg 2.5kg
30 40
3.75 3.75
10kg 10kg
30 40
3.75 3.75
25kg 25kg
Length
ALUMINIUM & COPPER LOOSE NAILS
COLLATED & LOOSE NAILS
ALUMINIUM NAILS
COPPER NAILS
Manufactured using high quality aluminium. These nails are ideal for all types of roofing work including slate. Providing high levels of rust protection.
Manufactured using high quality copper. These nails and straps are ideal for all types of roofing work including slate. Providing high levels of rust protection.
CLOUT
CLOUT
Large diameter head, commonly used for tile hanging.
Large diameter head, perfect for attaching roofing felt, slate and shingles
Product Code
Product Code
For roofing applications
For roofing applications
(mm)
Shank Dia. (mm)
Qty
30 40 50 65
2.65 3.35 3.35 3.35
250g 250g 250g 250g
30 40 50 65
2.65 3.35 3.35 3.35
1kg 1kg 1kg 1kg
30 40 50 65
2.65 3.35 3.35 3.35
1kg 1kg 1kg 1kg
30 40 50 65
2.65 3.35 3.35 3.35
10kg 10kg 10kg 10kg
Length
250g Bags ACN30B ACN40B ACN50B ACN65B
1kg Tubs ACN30T ACN40T ACN50T ACN65T
10kg Boxes ACN30 ACN40 ACN50 ACN65
Shank Dia. (mm)
Qty
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
500g 500g 500g 500g 500g 500g 500g
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
1kg 1kg 1kg 1kg 1kg 1kg 1kg
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
500g Bags
1kg Bags ACN30LB ACN40LB ACN50LB ACN65LB
(mm)
Length
COP225MB COP325MB COP230MB COP330MB COP238MB COP338MB COP350MB
1kg Bags COP225B COP325B COP230B COP330B COP238B COP338B COP350B
2.5kg Bags COP225LB COP325LB COP230LB COP330LB COP238LB COP338LB COP350LB
2.5kg Tubs COP225T COP325T COP230T COP330T COP238T COP338T COP350T
93
MASONRY LOOSE NAILS
COLLATED & LOOSE NAILS
COPPER DISC RIVETS
COPPER STRAPS
Large diameter head, perfect for attaching fibre cement slates
Used to prevent slate and shingles from slipping.
Product Code
Product Code
For use with copper clouts for fixing slate
For fixing fibre cement slates
(mm)
Shank Dia. (mm)
Qty
20
1.50
250
20
1.50
1,000
Length
(mm)
Width (mm)
Qty
150 150
13 13
10 100
Length
Bags
Bags CDRB
Tubs CDRT
MASONRY NAILS Available in:
Zinc (CR3)
CSS150P CSS150B
ROUND HEAD
For fixing timber to masonry
For heavy duty applications with a round head for additional clamping.
FLAT HEAD
Product Code
For fixing timber to masonry
(mm)
Shank Dia. (mm)
Qty
75
3.5
50
65 75 85 100
3.5 3.5 3.5 3.5
100 100 100 100
(mm)
Shank Dia. (mm)
Qty
25 30 35 40 50 60 75
3.7 3.7 3.7 3.7 3.7 3.7 3.7
100 100 100 100 100 100 50
Length
Packs HM35075P
For light to medium duty applications with a countersunk head for a concealed finish. Product Code
(mm)
Shank Dia. (mm)
Qty
25 30 35 40 50 60 65
2.5 2.5 2.5 2.5 2.5 3.0 3.0
50 50 50 50 50 50 50
25 30 35 40 50 40 50 60 65
2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
100 100 100 100 100 100 100 100 100
Length
Boxes HM35065 HM35075 HM35085 HM350100
Packs HM25025P HM25030P HM25035P HM25040P HM25050P HM30060P HM30065P
Boxes HM25025 HM25030 HM25035 HM25040 HM25050 HM30040 HM30050 HM30060 HM30065
94
WASHERED
For increased clamping
Product Code
Length
Boxes WMN25 WMN30 WMN35 WMN40 WMN50 WMN60 WMN75
STAINLESS STEEL NAILS
COLLATED & LOOSE NAILS
STAINLESS STEEL NAILS Provides high levels of rust protection.
ANNULAR RINGSHANK
ROUND WIRE
For additional strength
General purpose nail
Annular rings provide additional holding power, where additional grip is required.
General use with full round head for clamping.
Product Code
Product Code
(mm)
Shank Dia. (mm)
Qty
40 50 65 75 100
2.65 2.65 3.35 3.75 4.5
546 442 216 150 79
40 50 65 75 100
2.65 2.65 3.35 3.75 4.5
546 442 216 150 79
Length
Shank Dia. (mm)
Qty
75 100
3.75 4
150 100
75 100
3.75 4
150 100
1kg Bags
1kg Bags SSAR40B SSAR50B SSAR65B SSAR75B SSAR100B
(mm)
Length
SSRW75B SSWR100B
10kg Boxes SSRW75 SSRW100
10kg Boxes SSAR40 SSAR50 SSAR65 SSAR75 SSAR100
ROUND LOST HEAD For a concealed finish
The head can be punched below the surface for a concealed finish. Product Code
(mm)
Shank Dia. (mm)
Qty
50 65
2.65 3.35
443 216
50 65
2.65 3.35
443 216
Length
1kg Bags SSLH50B SSLH65B
10kg Boxes SSLH50 SSLH65B
95
BUILDERS METAL WORK 97 - MASONRY HANGERS 98 - MF HANGERS 99 - TIMBER HANGERS 100 - RESTRAINT STRAPS 102 - ANGLED BRACKETS 102 - TRUSS CLIPS 103 - FRAMING ANCHORS
103 - NAIL PLATES 104 - REINFORCEMENT COIL 104 - FRAME CRAMPS 104 - FIXING BANDS 105 - WINDOW BOARD TIES 105 - WALL TIES 105 - INSULATION CLIPS
106 - WALL STARTER KITS 106 - ARRIS RAIL BRACKETS 106 - FENCE CLIPS 107 - CONNECTORS & BRACES 102 - SHIMS & PACKERS
MASONRY HANGERS
BUILDERS METAL WORK
MASONRY HANGERS
For masonry to timber applications Available in:
Galv.
A2/Aust. SS
To BS
EN ISO
14592:2
008
Supports timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake out existing brickwork. Manufactured from pre-galvansied steel to give high level of corrosion resistance. For ultimate corrosion resistance use stainless steel
SINGLE PIECE -
Galv.
Product Code
Hangers 140mm and above are manufactured 10mm less than the joist to allow for notching and regularised timber.
B
Galv.
H (mm)
47100MH 47125MH 47147MH 47175MH 47200MH 47225MH
47 47 47 47 47 47
100 125 150 17 5 200 225
Product Code
W (mm)
H (mm)
B Joist Size (mm) W x H (mm)
Singles
H
WELDED -
W (mm)
80 80 80 75 75 75
47 x 100 47 x 125 47 x 150 47 x 175 47 x 200 47 x 225
W
A2/Aust. SS
Hangers 140mm and above are manufactured 10mm less than the joist to allow for notching and regularised timber.
B Joist Size (mm) W x H (mm)
Singles (Galvanised Steel)
H
B
W
75150WMH 75175WMH 75200WMH 75225WMH 90150WMH 90175WMH 90200WMH 90225WMH 100150WMH 100175WMH 100200WMH 100225WMH 150200WMH 150225WMH
75 75 75 75 90 90 90 90 100 100 100 100 150 150
140 165 190 215 140 165 190 215 140 165 190 215 190 215
80 80 80 80 80 80 80 80 75 75 75 75 90 90
75 x 150 75 x 175 75 x 200 75 x 225 90 x 150 90 x 175 90 x 200 90 x 225 100 x 150 100 x 175 100 x 200 100 x 225 150 x 200 150 x 225
80 80 80 80 80 80 80 80 80
47 x 100 47 x 140 47 x 165 47 x 190 47 x 215 100 x 140 100 x 165 100 x 190 100 x 215
Singles (Stainless Steel) 47100WMHS 47150WMHS 47175WMHS 47200WMHS 47225WMHS 100150WMHS 100175WMHS 100200WMHS 100225WMHS
47 47 47 47 47 100 100 100 100
100 140 165 190 215 140 165 190 215
97
MULTI-FUNCTIONAL / TIMBER HANGERS
BUILDERS METAL WORK
MULTI-FUNCTIONAL HANGERS For timber to timber applications Available in:
Galv.
For medium to heavy duty timber to timber applications. Designed for use with different fixings to give greater flexibility and improved performance. Overall length refers to the length of the hanger when flat.
MULTI-FUNCTIONAL HANGERS Location tabs aid fast accurate alignment of the hanger.
Product Code
W (mm)
H (mm)
B (mm)
Overall Length (mm)
47 47 47 47 76 76 76 90 100 100 100 150 150
97 150 179 229 165 164 214 207 123 152 202 127 177
85 85 85 85 85 85 85 85 85 85 85 85 85
240 346 404 504 346 404 504 504 346 404 504 404 504
Singles 47240MMFH 47346MFH 47404MFH 47504MFH 76346MFH 76404MFH 76504MFH 90504MFH 100346MFH 100404MFH 100504MFH 150404MFH 150504MFH
H
B W
MINI TIMBER HANGERS For timber to timber applications Available in:
Galv.
A2/Aust. SS
Timber to timber joist hangers, suitable for light duty applications such as ceiling joists, decking and trimmers.
MINI TIMBER HANGER Tag on base of the hanger helps avoid rotation and aids fast, accurate location. The tag can easily be bent if not required.
Product Code
W
H
(mm)
(mm)
B (mm)
Joist Size W x H (mm)
Singles (Galvanised Steel) H
44THM 47THM
44 47
68 67
50 50
44 x 75-100 47 x 75-100
50 50
44 x 100 to 150 47 x 100 to 150
Singles (Stainless Steel) B W
98
44THMS 47THMS
44 47
97 96
TIMBER HANGERS
BUILDERS METAL WORK
TIMBER HANGERS
For timber to timber applications Available in:
Galv.
A2/Aust. SS
For various timber to timber connections such as roof trusses, rafters and joists. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance. For ultimate corrosion resistance use stainless steel.
STANDARD -
Galv.
A2/Aust. SS
Product Code
Increased leg lengths, all widths can take up to a 225mm deep joist.
125TH 150TH
B
B (mm)
Joist Size (mm)
125 150
300 300
50 50
125 x 100 to 225 150 x 100 to 225
Singles (Stainless Steel) 47THS 76THS 100THS
47 76 100
275 300 300
50 50 50
47 x 100 to 225 76 x 100 to 225 100 x 100 to 225
Product Code
W
L (mm)
B (mm)
Joist Size
(mm)
44 47 63 75 90 100
306 305 297 291 283 278
60 60 60 60 60 60
44 x 125 to 220 47 x 125 to 220 63 x 125 to 220 75 x 125 to 220 90 x 125 to 220 100 x 125 to 220
W
Galv.
Superior design allows the use of fewer nails for faster installation. Increased leg lengths, all widths can take up to 225mm deep joist.
(mm)
Singles
L
B
LONG LEG -
L (mm)
Singles (Galvanised Steel)
L
NO TAG -
W (mm)
44TH 47TH 63TH 75TH 90TH 100TH
W
Galv.
Increased leg lengths, all widths can take up to a 225mm deep joist. Perfect for loft conversions where the hanger extends below the support.
Product Code
W
L (mm)
B (mm)
Joist Size
(mm)
44 47 76 90 100 125 150
453 445 435 425 420 450 450
50 50 50 50 50 50 50
44 x 150 to 250 47 x 150 to 250 76 x 175 to 250 90 x 150 to 250 100 x 150 to 250 125 x 175 to 250 150 x 175 to 250
(mm)
Singles L
B
44450LTH 47450LTH 76450LTH 90450LTH 100450LTH 125450LTH 150450LTH
W
99
HEAVY RESTRAINT STRAPS
BUILDERS METAL WORK
HEAVY RESTRAINT STRAPS Joins joists & rafters to masonry Available in:
Galv.
A2/Aust. SS
To BS
EN ISO
14592:2
008
Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Manufactured from Galvanised steel. For ultimate corrosion resistance use stainless steel.
BENT HEAVY DUTY -
Galv.
A2/Aust. SS
Usually used as a lateral restraint.
Product Code
Length (mm)
Bend Overall Thickness (mm) Length (mm) (mm)
Singles (Galvanised Steel) 600BRSH 800BRSH 1000BRSH 1200BRSH 1500BRSH 1600BRSH
500 700 900 1100 1400 1450
100 100 100 100 100 100
600 800 1,000 1,200 1,500 1,600
4.0 4.0 4.0 4.0 4.0 4.0
1,000 1,200
4.0 4.0
Singles (Stainless Steel) 1000BRSHS 900 1200BRSHS 1100
FLAT HEAVY DUTY -
Galv.
Product Code
Usually used as a lateral restraint.
Length (mm)
100 100
Bend Overall Thickness (mm) Length (mm) (mm)
Singles 1000FRSH
TWISTED HEAVY DUTY Usually used as a lateral restraint.
Galv.
Product Code
-
-
Length
Twist
(mm)
(mm)
500 900
100 100
1000
4.0
Overall Thickness Length (mm) (mm)
Singles 600TRSH 1000TRSH
100
600 1,000
4.0 4.0
LIGHT RESTRAINT STRAPS
BUILDERS METAL WORK
LIGHT RESTRAINT STRAPS Joins joists & rafters to masonry Available in:
Galv.
A2/Aust. SS To BS
EN ISO
14592:2
008
Light duty straps are generally for vertical applications such as holding down wallplates. (When used as a vertical restraint to hold down a wallplate, use a minimum length of 900mm) Available in galvanised steel, for ultimate corrosion resistance use stainless steel.
BENT LIGHT DUTY -
Galv.
A2/Aust. SS
Increased leg lengths, all widths can take up to a 225mm deep joist.
Product Code
Length
Bend
(mm)
(mm)
Overall Thickness Length (mm) (mm)
Singles (Galvanised Steel) 300BRSL 600BRSL 800BRSL 1000BRSL 1200BRSL
200 500 700 900 1100
100 100 100 100 100
300 600 800 1000 1200
2.4 2.4 2.4 2.4 2.4
1000
2.4
Singles (Stainless Steel) 1000BRSLS
FLAT LIGHT DUTY -
Galv.
A2/Aust. SS
Increased leg lengths, all widths can take up to a 225mm deep joist.
Product Code
800
100
Length
Bend
(mm)
(mm)
Overall Thickness Length (mm) (mm)
Singles (Galvanised Steel) 1000FRSL
-
-
1000
2.4
1000
2.4
Singles (Stainless Steel) 1000FRSLS
TWISTED LIGHT DUTY -
Galv.
Increased leg lengths, all widths can take up to a 225mm deep joist.
Product Code
-
-
Length
Twist
(mm)
(mm)
900
100
Overall Thickness Length (mm) (mm)
Singles 1000TRSL
1000
2.4
101
BUILDERS METAL WORK
ANGLED BRACKETS & TRUSS CLIPS
ANGLE BRACKETS
Fixes joists & rafters together Available in:
Galv.
A2/Aust. SS
A versatile and general purpose 90â ° bracket used to strengthen timber joints. Available in galvanised steel, for ultimate corrosion resistance use stainless steel.
Heavy duty brackets with strengthening ribs on bend to give added rigidity
Product Code
Width
Leg
Thickness
(mm)
(mm)
(mm)
Singles (Galvanised Steel) 5050AB 6040AB 9090AB 15090AB 150150AB
62 62 62 62 62
50 x 50 60 x 40 90 x 90 150 x 90 150 x 150
2.4 2.4 2.4 2.4 2.4
Singles (Stainless Steel) 6040ABS 9090ABS
62 62
60 x 40 90 x 90
2.4 2.4
TRUSS CLIPS
For fixing joists, girders & rafters Available in:
Galv.
For fixing trusses, girders and rafters to wallplate. Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross.
Installation prongs help aid location of the joist and rafters easier.
102
Product Code
Width
Thickness
Height
(mm)
(mm)
(mm)
47
1.0
150
Singles 47TC
UNIVERSAL FRAMING ANCHOR & PLATES
BUILDERS METAL WORK
UNIVERSAL FRAMING ANCHOR
For timber to timber applications Available in:
Galv.
An economical method of providing a strong joint for the construction of timber frames. The unique bending slot allows instant and accurate on-site bending for all 2 and 3 way ties. The reversible design is ideal for a variety of connections. Product Code
Width
Height
(mm)
(mm)
40 x 40
124
Singles UFA
NAIL PLATES
For timber to timber applications Available in:
Galv.
A2/Aust. SS To BS
EN ISO
14592:2
008
A versatile perforated plate used for connecting or repairing timber.
Strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish.
Product Code
Width
Thickness
Length
(mm)
(mm)
(mm)
Singles (Galvanised Steel) 42NP 85NP 104NP 169NP 178NP
42 85 104 169 178
1.0 1.0 1.0 1.0 1.0
178 178 154 178 338
1.0
178
Singles (Stainless Steel) 85NPS
85
103
COILS, BANDS & CRAMPS
BUILDERS METAL WORK
BRICK REINFORCEMENT COIL - Perfect for preventing cracking. Available in:
Galv.
FIXING BANDS
Perfect for suspending pipework Available in:
A2/Aust. SS
Produced for brick and block work reinforcement. Its primary usage is to prevent cracking. For ultimate corrosion resistance use stainless steel.
Product Code
Length (m)
Product Code
20 20 20
1210FB 1810FB 2010FB 2510FB
Singles (Galvanised Steel)
Width
Length
(mm)
(m)
Singles (Galvanised Steel)
65 100 175
Singles (Stainless Steel) 63BRCSS 100BRCSS
A2/Aust. SS
Multiple hole sizes to add to its versatility. Four different hole sizes ( 3.75 round, M10 round, M6 and M8 Square)
Width (mm)
63BRCG 100BRCG 175BRCG
Galv.
65 100
12 18 20 25
10 10 10 10
Singles (Stainless Steel)
20 20
2010FBS
20
10
CRAMPS
For fixing frames to masonry Available in:
Galv.
A2/Aust. SS
To BS
EN ISO
14592:2
008
Traditionally used for securing timber windows and door frames into masonry. They can also be used for restraining masonry to new and existing structures in non structural applications.
SAFETY FRAME CRAMPS -
A2/Aust. SS
Two 6mm holes and one 8mm hole. In stainless steel for maximum corrosion resistance.
Product Code
(mm)
Projection length (mm)
19 19 19
100 150 200
W
104
Galv.
Two 6mm holes and one 8mm hole. Galvanised after manufacture.
(mm)
(mm)
Product Code
50 50 50
2.0 2.0 2.0
100FFC 150FFC 200FFC
Bend Thickness
Singles 100SFCS 150SFCS 200SFCS
FISHTAILED CRAMPS -
(mm)
Projection length (mm)
25 25 25
100 150 200
W
Bend Thickness (mm)
(mm)
50 50 50
2.3 2.3 2.3
Singles
TIES & RETAINING CLIPS
WINDOW BOARD TIES
SCREW-IN FRAME TIE
Masonry to window board Available in:
BUILDERS METAL WORK
Masonry to wooden frames
Galv.
Light duty way to tie frames to masonry.
A simple solution to tie window boards to masonry.
Product Code
Width
Length
(mm)
(mm)
Product Code
12
147
175SFT
Singles WBT
Thread Dia x L
Projection Length
(mm)
(mm)
6 x 30
175
Singles
WALL TIES
For timber to timber applications To BS
Available in:
A2/Aust. SS
EN ISO
14592:2
LIGHT DUTY TYPE 4 WALL TIES Tangle free design, perfect for masonry cavity walls in box form for domestic dwellings of up to two storeys or a maximum 10m in height.
GENERAL DUTY TYPE 2 WALL TIES Tangle free design, perfect for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys and maximum 15m in height.
008
Product Code
Cavity Max Length x Qty Gauge (mm) Width (mm) Height (m)
Bundles 200WT4 225WT4 250WT4 275WT4
Product Code
200 x 2.3 225 x 2.3 250 x 2.3 275 x 2.3
50 to 75 76 to 100 101 to 125 up to 150
10 10 10 10
250 250 250 250
Cavity Max Length x Qty Gauge (mm) Width (mm) Height (m)
Bundles 225WT2 250WT2 275WT2
225 x 3 250 x 3 275 x 3
76 to 100 101 to 125 up to 150
15 15 15
250 250 250
INSULATION RETAINING CLIPS Used with a cavity wall tie to hold insulation material against the inner wall of the cavity.
Product Code
Width
Diameter
(mm)
(mm)
Universal
80
Qty
Bags IC
250
105
WALL STARTER KITS & ARRIS BRACKETS
BUILDERS METAL WORK
WALL STARTER KITS
Joins new walls to existing masonry Available in:
430 Ferritic Stainless Steel
A stainless steel system, designed to join new walls to existing masonry, suitable for both internal and external brick or block walls.
Product Code
Kit includes, x2 wall rails, x5 plugs / coach screws / washers x10 wall rail connectors
Width
Length
(mm)
(mm)
Kit Length (2 x Profiles) (mm)
41
1200
2400
Width
Length
Thickness
(mm)
(mm)
(mm)
62 x 62
300
0.7
Singles WSS
ARRIS RAIL BRACKETS For fixing fences to timber posts Available in:
Galv.
Ideal for installing and repairing fences with timber posts.
Product Code
Singles 300ARS
FENCING CLIPS Available in:
Galv.
A quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry.
Product Code
Width (mm)
Singles FC44 FC51
44 51
FENCE KIT
For fence repair and general maintenance Available in:
Zinc (CR3)
Collection of fixtures suitable for fence repair and general maintenance. Contents: 2 x Square Plate Washers 2 x Carriage Bolt & Hex Nut 2 x Corner Brace (38mm)
106
Product Code
Carriage Bolt & Nut (mm)
Square Plate Washer (mm)
Corner Braces (mm)
10 x 120
M10 x 50 x 50
38
Singles FKITP
CONNECTORS & BRACES
BUILDERS METAL WORK
CONNECTORS & BRACES
For joining and strengthening applications Available in: Zinc (CR3)
Galv.
Brass
Very versatile and multi-use products, they are commonly used in kitchen fitting, furniture repairs, carpentry and joinery. These plates may also be used in many other applications where joining or strengthening is required.
DRYWALL BRACKETS -
WORKTOP CONNECTOR -
Zinc (CR3)
Provides a concealed and strong joint for worktops eliminating the need for surface mounted joining strips. Frequently used in pairs. Brackets require 35mm holes.
Designed especially for connecting plasterboard dry lining systems to masonry walls, concrete soffit and timber joists.
Product Code
Size (mm) WxLxA
Qty
195 295
100 100
Product Code
Boxes DB195 DB295
Zinc (CR3)
Size (mm) WxLxA
Qty
M6 x 150
6
Bag
STRETCHER PLATES -
WC6150
Zinc (CR3) Product Code
Perfect for strengthening draws and kitchen fitting.
Size (mm) LxWxH
Thickness (mm)
Qty
38 x 25 x 29
1.8
100
38SPLP
38 x 25 x 29
1.8
4
Product Code
Size (mm) HxLxW
Thickness (mm)
Qty
25 x 25 x 16 38 x 38 x 16 50 x 50 x 16 65 x 65 x 16 75 x 75 x 16 100 x 100 x 22
1.6 1.6 1.6 1.7 1.7 2.3
50 50 50 50 50 25
25 x 25 x 16 38 x 38 x 16 50 x 50 x 16 65 x 65 x 16 75 x 75 x 16 100 x 100 x 22
1.6 1.6 1.6 1.7 1.7 2.3
4 4 4 4 4 2
Boxes
H
38SPL
Packs L
CORNER BRACES -
W
Zinc (CR3)
Perfect for strengthening draws and kitchen fitting. Countersunk holes for a flush finish.
Boxes H
25CBR 38CBR 50CBR 65CBR 75CBR 100CBR
Packs
L W
25CBRP 38CBRP 50CBRP 65CBRP 75CBRP 100CBRP
107
CONNECTORS & BRACES
BUILDERS METAL WORK
ANGLE BRACES -
TEE PLATES -
Zinc (CR3)
Size (mm) HxLxW
Thickness (mm)
Qty
19 x 19 x19
1.0
1,000
Product Code
Qty
76 x 76 x 16 x 16
2.0
25
76TPLP
76 x 76 x 16 x 16
2.0
2
Product Code
Size (mm) WxLxA
Thickness (mm)
Qty
50 x 50 x 13 75 x 75 x16
1.5 1.5
50 50
50CPLP 75CPLP
50 x 50 x 13 75 x 75 x16
1.5 1.5
4 4
Product Code
Size L x W (mm)
Thickness (mm)
Qty
75 x 16 100 x 16
1.85 2.0
50 50
75MPLP 100MPLP
75 x 16 100 x 16
1.85 2.0
4 4
Product Code
Size (mm)
Type
Qty
32 38 32 38
Plain Plain Slotted Slotted
1 1 1 1
Packs 19 x 19 x 19
1.0
CORNER PLATES -
10
A
Zinc (CR3)
Perfect for strengthening and repairing. Countersunk holes for a flush finish.
Boxes W
A
MENDING PLATES -
Zinc (CR3)
Perfect for strengthening and repairing. Countersunk holes for a flush finish. L W
MIRROR PLATES -
Brass
For mounting mirrors onto walls. Slotted and plain available.
DOUBLE SIDED TIMBER CONNECTORS - Galv. Designed to increase the joint strength when bolting two pieces of timber together.
50CPL 75CPL
Packs L
108
Thickness (mm)
76TPL
Packs 19ABRP
Size (mm) WxLxAxA
Boxes
Boxes 19ABR
W
L
W Product Code
L
Perfect for strengthening and repairing. Countersunk holes for a flush finish.
H
A
Perfect for strengthening draws and kitchen fitting.
Zinc (CR3)
Boxes 75MPL 100MPL
Packs
Packs PMP32P PMP38P SMP32P SMP38P
Product Code
Size (mm)
(mm)
50
M12
100
50
M12
15
50
M12
6
Bore
Qty
Boxes TCD50
Bags TCD50B
Packs TCD50P
A
SHIMS, PACKERS & WEDGES
BUILDERS METAL WORK
SHIMS, PACKERS & INTERLOCKING WEDGES Available in:
Nylon
SHIMS -
PACKERS -
Used for easy and quick levelling of battens, dry lining systems, stud work, door and window frames.
A solution for multiple applications, used to ensure correct weight distribution of glazed units and increase security around fixing points during frame fitting.
• Polypropylene material • Resistant to weather changes • Waterproof • Bag and tub includes two sizes
• Polypropylene material • Resistant to weather changes • Waterproof • Strong and durable
(mm)
Thickness (mm)
Colour
Qty
45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50
1 2 3 4 5 6 1 2 3 4 5 6
Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black
40 40 40 40 20 20 40 40 40 40 20 20
1 2 3 4 5 6 1 2 3 4 5 6
Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black
20 20 20 20 10 10 20 20 20 20 10 10
Size
Product Code
Mixed Tub
SHIMTUB
Product Code
Thickness Colour (mm)
Qty
Mixed Tub 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28
1 2 3 4 5 6
Green Black White Grey Blue Red
60 80 100 40 40 80
100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28
1 2 3 4 5 6
Green Black White Grey Blue Red
30 40 50 20 20 40
P1GREEN P2BLACK P3WHITE P4GREY P5BLUE P6RED
100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28
1 2 3 4 5 6
Green Black White Grey Blue Red
200 200 200 200 200 200
Product Code
(mm)
Thickness Colour (mm)
Qty
PACKERTUB
Mixed Bag PACKER
Mixed Bag
SHIM
Size (mm)
45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50
Bags
INTERLOCKING WEDGES The wedges provide a support block of consistent dimensions and allow adjustment for levelling and aligning various building components.
Size
Bags PIW810 PIW915
80 x 30 x 10 90 x 45 x 15
1 2
Black Black
200 200
109
DRILLING 111 - SDS PLUS HAMMER BITS 112 - SDS PLUS STEELS 113 - SDS REBAR CUTTERS 114 - SDS MAX HAMMER BITS 114 - SDS MAX STEELS 115 - DRILL BITS 116 - TILE AND GLASS BITS
116 - DIAMOND DRILL BITS 117 - BRAD POINT BITS 117 - HEX FLAT WOOD BITS 117 - HINGE CUTTERS 118 - AUGER BITS 120 - JOBBER DRILLS 124 - BLACKSMITH DRILLS
124 - STUB DRILLS 125 - BROACHING CUTTERS 126 - COUNTERSINKS 127 - WIRE BRUSHES 132 - CHUCKS & ADAPTORS 133 - DRILL SETS
SDS PLUS HAMMER BITS
DRILLING
PROFESSIONAL SDS PLUS HAMMER BITS
Materials
A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Product Code
(mm)
Working Length (mm)
Total Length (mm)
4.0 4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0
50 100 50 100 150 50 100 150 50 100 150 200 290 50 100 150 200 50 100 150 200 50 100 150 200 250 300 400 150 100 150 200 250 400 550 950 100 150 200 250
110 160 110 160 210 110 160 210 110 160 210 260 350 110 160 210 260 110 160 210 260 110 160 210 260 310 350 450 210 160 210 260 310 450 600 1000 160 210 260 310
Drill Ø
Singles AP4110 AP4160 AP5110 AP5160 AP5210 AP55110 AP55160 AP55210 AP6110 AP6160 AP6210 AP6260 AP6350 AP65110 AP65160 AP65210 AP65260 AP7110 AP7160 AP7210 AP7260 AP8110 AP8160 AP8210 AP8260 AP8310 AP8350 AP8450 AP9210 AP10160 AP10210 AP10260 AP10310 AP10450 AP10600 AP101000 AP12160 AP12210 AP12260 AP12310
Product Code
(mm)
Working Length (mm)
Total Length (mm)
12.0 12.0 12.0 13.0 14.0 14.0 14.0 14.0 14.0 14.0 15..0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 24.0 24.0 25.0 25.0 25.0 25.0 28.0 30.0
400 550 950 200 100 150 200 250 400 950 182 100 150 182 232 400 550 950 150 200 228 400 132 228 400 550 950 180 400 550 180 400 180 400 550 950 400 400
450 600 1000 260 160 210 260 310 450 1000 260 160 210 260 310 450 600 1000 210 260 310 450 210 310 450 600 1000 260 450 600 260 450 260 450 600 1000 450 450
Drill Ø
Singles AP12450 AP12600 AP121000 AP13260 AP14160 AP14210 AP14260 AP14310 AP14450 AP141000 AP15260 AP16160 AP16210 AP16260 AP16310 AP16450 AP16600 AP161000 AP18210 AP18260 AP18310 AP18450 AP20210 AP20310 AP20450 AP20600 AP201000 AP22260 AP22450 AP22600 AP24260 AP24450 AP25260 AP25450 AP25600 AP251000 AP28450 AP30450
111
SDS PLUS HAMMER BITS
DRILLING
TRADESMAN SDS PLUS HAMMER BITS
Materials
A cost effective drill bit with a tungsten carbide tip to give durability and precision when used in concrete and masonry.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0
100 50 100 150 50 100 150 50 100 150 200 50 100 150 200 50 100 150 50 100 150 200 250 400 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550 150 200
160 110 160 210 110 160 210 110 160 210 260 110 160 210 260 110 160 210 110 160 210 260 310 450 160 210 260 310 450 600 160 210 260 310 450 600 160 210 260 310 450 600 160 210 250 300 450 600 200 260
Drill Ø
Singles SDS4160 SDS5110 SDS5160 SDS5210 SDS55110 SDS55160 SDS55210 SDS6110 SDS6160 SDS6210 SDS6260 SDS65110 SDS65160 SDS65210 SDS65260 SDS7110 SDS7160 SDS7210 SDS8110 SDS8160 SDS8210 SDS8260 SDS8310 SDS8450 SDS10160 SDS10210 SDS10260 SDS10310 SDS10450 SDS10600 SDS12160 SDS12210 SDS12260 SDS12310 SDS12450 SDS12600 SDS14160 SDS14210 SDS14260 SDS14310 SDS14450 SDS14600 SDS16160 SDS16210 SDS16260 SDS16310 SDS16450 SDS16600 SDS18210 SDS18260
112
Product Code
(mm)
Working Length (mm)
Total Length (mm)
18.0 18.0 20.0 20.0 20.0 20.0 22.0 22.0 25.0
250 400 150 250 400 550 200 400 400
300 450 200 300 450 600 250 450 450
Drill Ø
Singles SDS18310 SDS18450 SDS20210 SDS20310 SDS20450 SDS20600 SDS22260 SDS22450 SDS25450
SDS PLUS STEELS
POINT
TILE
SPADE/CHISEL
GOUGE
NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. TILE - Angled head design for easy removal of tiles, plaster or rendering. CHISEL \ SPADE - Breaks up concrete and masonry. Also removes plaster or rendering. GOUGE - Removes mortar from brickwork prior to re-pointing. Product Code
Description
(mm)
Total Length (mm)
N/A 20 40 22 40
250 250 250 250 250
Width
Singles SDSP SDSC SDSS SDSG SDST
Point Chisel Spade Gouge Tile
SDS REBAR CUTTERS
DRILLING
SDS SHANK REBAR CUTTERS
Materials
Used to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.
Rotary rebar cutters are designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M’S.
SHANK REBAR CUTTER
HEAD ONLY
Used to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.
Used with rebar adaptor to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.
How to Guide
Product Code
Drill Ø (mm)
Working Length
Total Length
(mm)
(mm)
Rec. RPM
Singles MSRB10* MSRB12* MSRB14* MSRB16 MSRB18 MSRB20
10.0 12.0 14.0 16.0 18.0 20.0
250 250 250 250 250 250
* Products are not vented.
300 300 300 300 300 300
750-1000 600-850 600-850 500-750 500-750 460-600
Product Code
Drill Ø (mm)
Working Length
Total Length
(mm)
(mm)
110 110 110 110
260 260 260 260
Rec. RPM
Singles MRB22HO MRB24HO MRB25HO MRB26HO
22.0 24.0 25.0 26.0
460-600 350-500 350-500 350-500
ADAPTOR FOR CUTTER HEADS Used with 22mm and above rebar cutter heads. USE ROTARY MODE ONLY.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
-
220
260
Drill Ø
Singles STDS212
113
SDS MAX HAMMER BITS
DRILLING
SDS MAX HAMMER BITS
Materials
SDS Max is an alternative system to the SDS Plus. Used mainly to drill dense materials or where there is heavy usage.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
12 12 14 14 16 16 18 18 18 18 20
195 395 195 395 195 395 195 395 545 775 195
340 540 340 540 340 540 340 540 690 920 340
Drill Ø
Singles SDSM12340 SDSM12540 SDSM14340 SDSM14540 SDSM16340 SDSM16540 SDSM18340 SDSM18540 SDSM18690 SDSM18920 SDSM20340
Product Code
(mm)
Working Length (mm)
Total Length (mm)
20 20 20 24 25 25 25 26 26 32 32
395 545 775 195 195 395 545 195 395 195 395
540 690 920 340 340 540 690 340 540 340 540
Drill Ø
Singles SDSM20540 SDSM20690 SDSM20920 SDSM24340 SDSM25340 SDSM25540 SDSM25690 SDSM26340 SDSM26540 SDSM32340 SDSM32540
SDS MAX STEELS
Materials
A range of tools designed for use in rotation stop hammers with the larger SDS Max tool holder system. NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. CHISEL - Breaks up concrete and masonry, removes plaster or rendering. SLOTTING TOOL - Removes mortar from brickwork prior to re-pointing.
Product Code
Description
Width
Total
(mm) Length (mm)
Singles SDSMP280 Point N/A SDSMP400 Point N/A SDSMC280 Chisel 25 SDSMC400 Chisel 25 SDSMC40050 Wide Chisel 50 SDSMC30075 Extra Wide Chisel 75 SDSMST Slotting Tool 25
114
280 400 280 400 400 300 280
POINT
CHISEL
SLOTTING
MULTI-PURPOSE / MASONRY DRILL BITS
DRILLING
TCT MULTI-PURPOSE DRILL BITS
Materials
Designed to drill steel, wood, masonry, PVCu, ceramics and concrete. Diamond-ground cutting edges allow fast drilling even in hard materials. USE ON ROTARY ONLY.
Product Code
Drill Ø (mm)
Working Total Length (mm) Length (mm)
Singles MP475 MP4150 MP585 MP5150 MP55100 MP55150 MP6100
Product Code
Drill Ø (mm)
Working Total Length (mm) Length (mm)
Singles 4.0 4.0 5.0 5.0 5.5 5.5 6.0
40 87 55 87 58 87 58
75 150 85 150 100 150 100
MP6150 MP65100 MP65150 MP7100 MP7150 MP8150 MP10150
6.0 6.5 6.5 7.0 7.0 8.0 10.0
MASONRY DRILL BITS
87 58 87 58 87 87 87
150 100 150 100 150 150 150
Materials
A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action. Product Code
(mm)
Working Length (mm)
Total Length (mm)
4.0 4.0 5.0 5.0 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0
40 87 47 87 47 87 58 87 120 220 58 87 120 220 58 87 220 75 87 120 220
75 150 85 150 85 150 100 150 200 300 100 150 200 300 100 150 300 120 150 200 300
Drill Ø
(mm)
Working Length (mm)
Total Length (mm)
10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 20.0 20.0 25.0
75 87 120 220 300 90 127 220 300 90 127 300 90 127 220 300 152 300 300
120 150 200 300 400 150 200 300 400 150 200 400 150 200 300 400 200 400 400
Drill Ø
Singles
Singles APM475 APM4150 APM585 APM5150 APM5585 APM55150 APM6100 APM6150 APM6200 APM6300 APM65100 APM65150 APM65200 APM65300 APM7100 APM7150 APM7300 APM8120 APM8150 APM8200 APM8300
Product Code
APM10120 APM10150 APM10200 APM10300 APM10400 APM12150 APM12200 APM12300 APM12400 APM14150 APM14200 APM14400 APM16150 APM16200 APM16300 APM16400 APM20200 APM20400 APM25400
115
GLASS & DIAMOND DRILL BITS
DRILLING
TCT TILE & GLASS BITS
Materials
For accurate drilling of glass and ceramics. A lubricant such as water or turpentine is recommended when drilling glass. USE AT LOW R.P.M IN ROTARY MODE ONLY. Product Code
(mm)
Working Length (mm)
5.0 6.0 6.5 7.0 8.0 10.0
60 60 75 75 75 80
Drill Ø
Singles TG5 TG6 TG65 TG7 TG8 TG10
DIAMOND DRILL BITS DRY
WET
Ideal for drilling a clean hole into hard materials such as ceramics, porcelain, marble and slate.
Used to drill an accurate hole into hard materials such as ceramics, porcelain, marble and slate. Use wet.
How to Guide
How to Guide
Product Code
(mm)
Working Length (mm)
Product Code
5 6 7 8 10 12 15 20 25
65 65 80 80 80 80 80 80 80
DD5 DD6 DD7 DD8 DD10 DD12 DD20 DD25 DD115
Drill Ø
Singles VBD5 VBD6 VBD7 VBD8 VBD10 VBD12 VBD15 VBD20 VBD25
116
Materials
(mm)
Working Length (mm)
5 6 7 8 10 12 20 25 115
35 35 35 35 35 35 35 35 35
Drill Ø
Singles
BRAD POINT & FLAT WOOD BITS
DRILLING
HSS BRAD POINT WOOD BITS
HEXAGONAL SHANK FLAT WOOD BITS
Materials
Materials
For drilling small diameter holes into various types of timber and man-made boards.
The twin cutting edges and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
3.0 4.0 5.0 6.0 7.0 8.0 10.0
33 43 52 57 69 75 87
60 75 87 92 108 118 133
Drill Ø
Singles BP3 BP4 BP5 BP6 BP7 BP8 BP10
TCT HINGE CUTTERS
Product Code
(mm)
Total Length (mm)
6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0 25.0 26.0 28.0 30.0 32.0 35.0 38.0
152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152
Drill Ø
Singles FB6 FB8 FB10 FB12 FB13 FB14 FB16 FB18 FB19 FB20 FB22 FB24 FB25 FB26 FB28 FB30 FB32 FB35 FB38
Materials
1/4” EXTENSION RODS
Superb quality, heavy duty tungsten carbide-tipped hinge drill with centre point and outer spurs. Designed to drill 35mm holes for concealed hinges. Product Code
Overall Length (mm)
Shank Ø
(mm)
35
60
12.7
Drill Ø
(mm)
Singles 35HC
1/4” extension rods to be used where there is restrictive access and in conjunction with a ¼” shank Flat Wood Bit, (Allen key provided). Product Code FBEQR150 FBEQR300
Drill Ø (mm)
Length
6.35 Q/R 6.35 Q/R
150 300
117
AUGER BITS
DRILLING
WOOD AUGER BITS
Materials
A high performance wood drill for drilling deep holes into various types of timber. Available with Hex or SDS Plus shank.
HEX SHANK Product Code
Product Code
(mm)
Working Length (mm)
Total Length (mm)
10.0 12.0 16.0 20.0 22.0 25.0 32.0 8.0 14.0 16.0 19.0 20.0 22.0 25.0 28.0 30.0 32.0 6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0
55 55 55 55 55 55 55 90 90 90 90 90 90 90 90 90 90 165 165 165 165 165 165 165 165 165 165 165
100 100 100 100 100 100 100 155 155 155 155 155 155 155 155 155 155 235 235 235 235 235 235 235 235 235 235 235
Drill Ø
Singles HA10100 HA12100 HA16100 HA20100 HA22100 HA25100 HA32100 HA8155 HA14155 HA16155 HA19155 HA20155 HA22155 HA25155 HA28155 HA30155 HA32155 HA6235 HA8235 HA10235 HA12235 HA13235 HA14235 HA16235 HA18235 HA19235 HA20235 HA22235
* CARPENTERS KIT on page 126
118
Working Length (mm)
Total Length (mm)
24.0 25.0 26.0 28.0 30.0 32.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 26.0
165 165 165 165 165 165 385 385 385 385 385 385 385 385 385
235 235 235 235 235 235 460 460 460 460 460 460 460 460 460
Singles HA24235 HA25235 HA26235 HA28235 HA30235 HA32235 HA8460 HA10460 HA12460 HA14460 HA16460 HA18460 HA20460 HA22460 HA26460
SDS PLUS SHANK Product Code
(mm)
Working Length (mm)
Total Length (mm)
6.0 8.0 10.0 12.0 16.0 20.0 22.0 25.0
100 100 160 160 160 160 160 160
200 200 235 235 235 235 235 235
(mm)
Working Length (mm)
Total Length (mm)
16.0 20.0 25.0
80 80 80
159 159 159
Drill Ø
Singles SA6200 SA8200 SA10235 SA12235 SA16235 SA20235 SA22235 SA25235
SPEED WOOD AUGER BITS
Speed Augers with a four fluted cutter, designed for rapid chip ejection and cleaner hole drilling in timber.
(mm)
Drill Ø
Materials
Product Code
Drill Ø
Singles SPA16 SPA20 SPA25
HIGH PERFORMANCE AUGER BITS
DRILLING
HIGH PERFORMANCE LONG REACH AUGER BITS
HIGH PERFORMANCE IMPACT AUGER BITS
Materials
Materials
A high performance Auger bit specifically designed to drill a deep clean hole into all natural woods. This high quality drill will out perform a standard Auger drill in lifetime and performance.
A high performance Auger bit specifically designed to drill a deep clean hole into all natural woods. This high quality drill will out perform a standard Auger drill in lifetime and performance.
KEY FEATURES • 3x longer life • Spurred cutting edge for a fast even cut • Unique twist design for clean, smooth chip removal • Burr-free lead screw for quick, on-target starts without material build up • High carbon steel (S55C) with precise all hardened treatment. • Made in Japan
DESIGNED FOR IMPACT DRIVERS.
Product Drill Ø (mm) Code
Working Length (mm)
Total Length
260 300 300 351 351 351 351 351 351 351 351 351
300 400 400 457 457 457 457 457 457 457 457 457
(mm)
Shank (mm)
Singles DA5 DA6 DA8 DA10 DA12 DA14 DA16 DA18 DA20 DA22 DA25 DA32
KEY FEATURES • 3x longer life • Spurred cutting edge for a fast even cut • Unique twist design for clean, smooth chip removal • Burr-free lead screw for quick, on-target starts without material build up • High carbon steel (S55C) with precise all hardened treatment. • Made in Japan
Product Drill Ø (mm) Code
Working Length (mm)
Total Length
90 100 100 110 120 130 130 130 135 135 135 135
140 160 170 180 190 200 200 200 205 205 205 205
(mm)
Shank (mm)
Singles 5 6 8 10 12 14 16 18 20 22 25 32
4.7 Round 4.7 Round 8.0 Hex 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC
IA5 IA6 IA8 IA10 IA12 IA14 IA16 IA18 IA20 IA22 IA25 IA32
5 6 8 10 12 14 16 18 20 22 25 32
6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 10.0 Hex
119
COBALT JOBBER DRILLS
DRILLING
COBALT JOBBER DRILLS
Materials
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point prevents the bit from drifting.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Tubes HSSCO1 HSSCO15 HSSCO2 HSSCO25 HSSCO3 HSSCO32 HSSCO33 HSSCO35 HSSCO4 HSSCO42 HSSCO45 HSSCO48 HSSCO5 HSSCO55 HSSCO6 HSSCO65 HSSCO68 HSSCO7 HSSCO75 HSSCO8 HSSCO85 HSSCO9 HSSCO95 HSSCO100 HSSCO102 HSSCO105 HSSCO110 HSSCO115 HSSCO120 HSSCO125 HSSCO130
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles 1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101
34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5
HSSCOR1 HSSCOR15 HSSCOR2 HSSCOR25 HSSCOR3 HSSCOR32 HSSCOR33 HSSCOR35 HSSCOR4 HSSCOR42 HSSCOR45 HSSCOR48 HSSCOR5 HSSCOR55 HSSCOR6 HSSCOR65 HSSCOR7 HSSCOR75 HSSCOR8 HSSCOR85 HSSCOR9 HSSCOR95 HSSCOR100 HSSCOR105 HSSCOR110 HSSCOR115 HSSCOR120 HSSCOR125 HSSCOR130
1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101
34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
COBALT JOBBER DRILL SET Available in 19 or 25 piece sets
Product Code HSSCO19DS HSSCO25DS
120
Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)
M2 FULLY GROUND JOBBER DRILLS
DRILLING
M2 FULLY GROUND JOBBER DRILLS
Materials
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Tubes HSSG1 HSSG15 HSSG2 HSSG24 HSSG25 HSSG3 HSSG31 HSSG32 HSSG33 HSSG35 HSSG36 HSSG38 HSSG4 HSSG41 HSSG42 HSSG45 HSSG48 HSSG49 HSSG5 HSSG51 HSSG53 HSSG55 HSSG6 HSSG64 HSSG65 HSSG68 HSSG7 HSSG75 HSSG8 HSSG85 HSSG9 HSSG95 HSSG100 HSSG102 HSSG105 HSSG110 HSSG115 HSSG120 HSSG125 HSSG130
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles 1.0 1.5 2.0 2.4 2.5 3.0 3.1 3.2 3.3 3.5 3.6 3.8 4.0 4.1 4.2 4.5 4.8 4.9 5.0 5.1 5.3 5.5 6.0 6.4 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 30 33 36 36 36 39 39 43 43 43 43 47 52 52 52 52 52 57 57 63 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101
34 40 49 57 57 61 65 65 65 70 70 75 75 75 75 80 86 86 86 86 86 93 93 101 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
24 30 33 39 43 47 52 57 57 63 69
49 57 61 70 75 80 86 93 93 101 109
1 1 1 1 1 1 1 1 1 1 1
Singles HSSGR2 HSSGR25 HSSGR3 HSSGR35 HSSGR4 HSSGR45 HSSGR5 HSSGR55 HSSGR6 HSSGR65 HSSGR7
Product Code
HSSGR8 HSSGR85 HSSGR9 HSSGR100 HSSGR110 HSSGR120 HSSGR130
8.0 8.5 9.0 10.0 11.0 12.0 13.0
75 75 81 87 94 101 101
117 117 125 133 142 151 151
1 1 1 1 1 1 1
Flute
Total
Pack
IMPERIAL Product Code
Drill Ø
(Imp.) Length (Imp.) Length (Imp.) Qty
Tubes HSIG116 HSIG132 HSIG364 HSIG564 HSIG332 HSIG764 HSIG18 HSIG964 HSIG532 HSIG316 HSIG1364 HSIG732 HSIG14 HSIG516 HSIG2164 HSIG38 HSIG12
1/16 1/32 3/64 5/64 3/32 7/64 1/8 9/64 5/32 3/16 13/64 7/32 1/4 5/16 21/64 3/8 1/2
7/8 1/2 3/4 1 11/4 11/2 15/8 13/4 2 25/16 27/16 21/2 23/4 33/16 35/16 35/8 41/2
17/8 13/8 11/4 2 21/4 25/8 23/4 27/8 21/8 31/2 35/8 33/4 4 41/2 45/8 5 6
10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5
M2 JOBBER DRILL SET Available in 19 or 25 piece sets
Product Code HSSG19DS HSSG25DS
Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)
121
ROLL FORGED JOBBER DRILLS
DRILLING
ROLL FORGED JOBBER DRILLS
Materials
An economic HSS drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Tubes HSSR1 HSSR15 HSSR2 HSSR25 HSSR3 HSSR32 HSSR33 HSSR35 HSSR36 HSSR4 HSSR42 HSSR45 HSSR48 HSSR49 HSSR5 HSSR52 HSSR55 HSSR6 HSSR65 HSSR68 HSSR7 HSSR72 HSSR75 HSSR8 HSSR85 HSSR9 HSSR95 HSSR96 HSSR100 HSSR102 HSSR105 HSSR110 HSSR115 HSSR120 HSSR125 HSSR130
122
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Packs 1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 3.6 4.0 4.2 4.5 4.8 4.9 5.0 5.2 5.5 6.0 6.5 6.8 7.0 7.2 7.5 8.0 8.5 9.0 9.5 9.6 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 33 36 36 39 39 43 43 47 52 52 52 52 57 57 63 69 69 69 69 75 75 81 81 87 87 87 87 94 94 101 101 101
34 40 49 57 61 65 65 70 70 75 75 80 86 86 86 86 93 93 101 109 109 109 109 109 109 125 125 133 133 133 133 142 142 151 151 151
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
1.0 1.5 2.0 2.5 3.0 3.3 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0
12 18 24 30 33 36 39 43 47 52 57 57 63 69 75
34 40 49 57 61 65 70 75 80 86 93 93 101 109 109
2 2 2 2 2 2 2 2 2 2 2 2 1 1 1
Packs HSSRR1 HSSRR15 HSSRR2 HSSRR25 HSSRR3 HSSRR33 HSSRR35 HSSRR4 HSSRR45 HSSRR5 HSSRR55 HSSRR6 HSSRR65 HSSRR7 HSSRR8
Product Code
HSSRR85 HSSRR9 HSSRR100 HSSRR110 HSSRR120 HSSRR130
8.5 9.0 10.0 11.0 12.0 13.0
75 81 87 94 101 101
117 125 133 142 151 151
1 1 1 1 1 1
Flute
Total
Pack
IMPERIAL Product Code
Drill Ø
(Imp.) Length (Imp.) Length (Imp.) Qty
Tubes HSIR116 HSIR564 HSIR332 HSIR764 HSIR18 HSIR964 HSIR532 HSIR1164 HSIR316 HSIR732 HSIR14 HSIR1764 HSIR516 HSIR38 HSIR12
1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 7/32 1/4 17/64 5/16 3/8 1/2
7/8 1 11/4 11/2 15/8 13/4 2 21/8 25/16 21/2 23/4 27/8 33/16 35/8 41/2
17/8 2 21/4 25/8 23/4 27/8 31/8 31/4 31/2 33/4 4 41/8 41/2 5 6
10 10 10 10 10 10 10 10 10 10 10 10 5 5 5
ROLL FORGED JOBBER DRILL SET Available in 19, 25 or 170 piece sets
Product Code HSSR19DS HSSR25DS HSSR170DS
Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm) 170pcs. x10pcs.1-8mm (increments of 0.5mm) x5pcs. 8.5-10mm (increments of 0.5mm)
M2 FULLY GROUND LONG JOBBER DRILLS
DRILLING
M2 FULLY GROUND LONG JOBBER DRILLS
Materials
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above prevents ‘walking’ and enables faster penetration. Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Tubes
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles
HSSGL2 HSSGL25 HSSGL3 HSSGL32 HSSGL35 HSSGL4 HSSGL42 HSSGL45 HSSGL48 HSSGL5 HSSGL55 HSSGL6 HSSGL65 HSSGL7 HSSGL8 HSSGL85 HSSGL9 HSSGL100
2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 8.0 8.5 9.0 10.0
56 62 66 69 73 78 78 82 87 87 91 91 97 102 109 109 115 121
85 95 100 106 112 119 119 126 132 132 139 139 148 156 165 165 175 184
10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5
HSSGLR3 HSSGLR35 HSSGLR4 HSSGLR45 HSSGLR5 HSSGLR55 HSSGLR6 HSSGLR65 HSSGLR7 HSSGLR8
3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0
66 73 78 82 87 91 91 97 102 109
100 112 119 126 132 139 139 148 156 165
1 1 1 1 1 1 1 1 1 1
Driver Bits & Adaptors IMPACT BITS POZI PHILLIPS
TIMDRIVE SLOTTED SQUARE
HEX NUT SETTERS
MAGNETIC ADAPTORS
SEE PAGES
163 - 166 123
BLACKSMITH & STUB DRILLS
DRILLING
BLACKSMITHS DRILLS
Materials
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance when drilling larger diameter holes into all non-alloy materials. Can be used in a 1/2” chuck.
Product Code
(mm)
Flute Length (mm)
Total Length (mm)
13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 22.0 24.0 25.0
75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160
Drill Ø
Singles BS135 BS14 BS145 BS15 BS155 BS16 BS165 BS17 BS175 BS18 BS185 BS19 BS195 BS20 BS22 BS24 BS25
STUB DRILLS
Materials
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting. Mainly used for drilling sheet metal.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Packs HSSGS32 HSSGS33 HSSGS4 HSSGS41 HSSGS42 HSSGS49 HSSGS5 HSSGS51
124
3.2 3.3 4.0 4.1 4.2 4.9 5.0 5.1
18 18 22 22 22 26 26 26
49 49 55 55 55 62 62 62
10 10 10 10 10 10 10 10
BROACHING CUTTERS
DRILLING
BROACHING CUTTERS
Materials
Manufactured from a high grade M2 tool steel for drilling heavy gauge non-alloy materials, with magnetic drills. Pilot rod must be used to prevent drifting.
50mm LONG REACH
30mm SHORT REACH Product Code
Cutter Ø
Cutter Depth
(mm)
(mm)
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 36 38 39 40 50
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
Singles BCS12 BCS13 BCS14 BCS15 BCS16 BCS17 BCS18 BCS19 BCS20 BCS21 BCS22 BCS23 BCS24 BCS25 BCS26 BCS27 BCS28 BCS29 BCS30 BCS31 BCS32 BCS33 BCS35 BCS36 BCS38 BCS39 BCS40 BCS50
Product Code
Cutter Ø
Cutter Depth
(mm)
(mm)
12 13 14 15 16 17 18 20 21 22 24 26 28 30 32 39
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Singles BCL12 BCL13 BCL14 BCL15 BCL16 BCL17 BCL18 BCL20 BCL21 BCL22 BCL24 BCL26 BCL28 BCL30 BCL32 BCL39
REPLACEMENT PILOT PINS Product Code
Cutter Ø
Cutter Depth
(mm)
(mm)
12-50 12-50
30 50
Singles A pilot pin used with broaching cutters in order to centre the bit when drilling.
BCL301250 BCL501250
125
COUNTERSINKS, CUTTERS & STEP DRILLS
DRILLING
COUNTERSINKS
Materials
DE-BURRING COUNTERSINKS
3 FLUTE COUNTERSINKS
A single flute countersink designed for general purpose countersinking, chamfering or de-burring in alloy and non-alloy metals, timber and man-made boards.
These engineering quality countersinks drill a precise recess to allow a fastener head to sit flush in alloy and non-alloy metals, timber and man-made boards.
Product Code
Product Code
Ø (mm)
Singles CS25 CS510 CS1015 CS1520
Ø
Screw Ø
Screw Ø
(mm)
(mm)
(imp.)
6.3 8.3 10.4 12.4 16.5 20.5 25.0
3.0 3.5-4.0 4.5-5.0 6.0 8.0 -
4-5 6-8 10 12 16 -
Singles 2 to 5 5 to 10 10 to 15 15 to 20
CS63 CS83 CS104 CS124 CS165 CS205 CS250
CONE CUTTERS & STEP DRILLS
CONE CUTTERS
STEP DRILLS
For drilling, enlarging and de-burring holes in thin sheet metal up to a thickness of 2mm
Ideal for drilling, enlarging or de-burring a precise hole into thin materials such as alloy and nonalloy metals up to a thickness of 4mm.
Product Code
Product Code
Ø (mm)
Singles CC314 CC520 CC531 CC1631
126
Materials
Ø (mm)
Singles 3 to 14 5 to 20 5 to 31 16 to 31
SD412 SD420 SD430 SD439
4,5,6,7,8,9,10,11,12 4,6,8,10,12,14,16,18,20 4,6,8,10,12,15,18,20,22,24,26,28,30 4,6,8,10,12,21,25,27,30,33,36,39
WIRE BRUSHES
DRILLING
CRIMPED STEEL WIRE BRUSH Suitable for use with drill drivers when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
Materials
Product Code
Ø (mm)
Shaft
Wire Thickness
Max R.P.M
1/4” Hex 1/4” Hex 1/4” Hex
0.3 0.3 0.3
4,500 4,500 4,500
Singles 50SWC 75SWC 100SWC
50 75 100
CRIMPED STEEL WIRE END BRUSH Suitable for use with drill drivers when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
Materials
Product Code
Ø (mm)
Shaft
Wire Thickness
Max R.P.M
1/4” Hex
0.3
4,500
Singles 25SEC
25
CRIMPED STEEL WIRE CUP BRUSH Suitable for use with drill drivers when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
Materials
Product Code
Ø (mm)
Wire Thickness
Max R.P.M
1/4” Hex 1/4” Hex
0.3 0.3
4,500 4,500
Shaft
Wire Thickness
Max R.P.M
1/4"
0.3
4,500
Singles 50SCC 75SCC
50 75
TWIST KNOT STEEL WIRE WHEEL BRUSH Suitable for use with drill driver when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt.
Shaft
Product Code
Materials
Ø (mm)
Singles 75SWT
75
127
DRILLING
WIRE BRUSHES
NYLON WHEEL BRUSH Suitable for use with drill driver when cleaning stone, masonry and wood surfaces. The nylon brush is less aggressive and an ideal option for light de-burring, polishing and finishing
Materials
Product Code
Ø (mm)
Shaft
Wire Thickness
Max R.P.M
1/4” Hex 1/4” Hex
1.2 1.2
4,500 4,500
Singles 75SWN 100SWN
75 100
NYLON CUP BRUSH Suitable for use with drill driver when cleaning stone, masonry and wood surfaces. The nylon brush is less aggressive and an ideal option for light de-burring, polishing and finishing
Materials
Product Code
Ø (mm)
Shaft
Wire Thickness
Max R.P.M
1/4” Hex 1/4” Hex
1.2 1.2
4,500 4,500
Singles 50SCN 75SCN
50 75
CRIMPED STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
Materials
Product Code
Ø (mm)
128
Wire Thickness
Max R.P.M
M14 M14 M14 M14
0.3 0.3 0.3 0.3
12,500 8,500 6,500 6,500
Shaft
Wire Thickness
Max R.P.M
M14 M14
0.5 0.5
8,500 8,500
Singles 75TCC 100TCC 125TCC 150TCC
75 100 125 150
CRIMPED STAINLESS STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning and polishing stainless steel and aluminium. The crimped stainless steel wire is ideal for lightly removing loose paint, rust or dirt without scarring or contaminating the base material.
Shaft
Product Code
Materials
Ø (mm)
Singles 75TCCSS 100TCCSS
75 100
WIRE BRUSHES
DRILLING
TWISTED KNOT STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The 0.5mm steel left-hand twist wire is hard wearing and gives an aggressive removal of paint, rust, rubber, concrete or dirt whist maintaining its shape and improves user control. The metal ring around the base of the cup reduces the likelihood of centrifugal-splay and can also be removed to increase usage life.
Materials
Product Code
Ø (mm)
Wire Thickness
Max R.P.M
M14 M14
0.5 0.5
8,500 8,500
Shaft
Wire Thickness
Max R.P.M
M14
0.5
8,500
Singles 80TCT 100TCT
80 100
TWISTED KNOT STAINLESS STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning stainless steel and aluminium. The 0.5mm left-hand twist wire is hard wearing and gives an aggressive removal of paint, rust, rubber, concrete or dirt whist maintaining its shape. The stainless steel reduces contamination of the base material. The metal ring around the base of the cup reduces the likelihood of centrifugal-splay and can also be removed to increase usage life.
Shaft
Product Code
Materials
Ø (mm)
Singles 100TCTSS
100
CRIMPED STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
Materials
Product Code
Ø (mm)
Wire Thickness
Max R.P.M
M14
0.3
12,500
Shaft
Wire Thickness
Max R.P.M
M14
0.3
12,500
Singles 115TBC
115
CRIMPED STAINLESS STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning and polishing metal surfaces. The crimped stainless steel wire is ideal for lightly removing loose paint, rust or dirt without scarring or contaminating the base material.
Shaft
Product Code
Ø (mm)
Materials
Singles 115TBCSS
115
129
DRILLING
WIRE BRUSHES
TWISTED KNOT STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.
Materials
Product Code
100TBT
Product Code
100
130
Max R.P.M
M14
0.5
12,500
Ø (mm)
Shaft
Wire Thickness
Max R.P.M
M14
0.5
12,500
Shaft
Wire Thickness
Max R.P.M
M14
0.5
12,500
Shaft
Wire Thickness
Max R.P.M
M14
0.5
12,500
Singles 100TBTSS
100
Materials
Product Code
Ø (mm)
Singles 115TWT
TWISTED KNOT STAINLESS STEEL WIRE BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas. The stainless steel reduces contamination of the base material.
Wire Thickness
Materials
TWISTED KNOT STEEL WIRE BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.
Shaft
Singles
TWISTED KNOT STAINLESS STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas. The stainless steel reduces contamination of the base material.
Ø (mm)
115
Materials
Product Code
Ø (mm)
Singles 115TWTSS
115
CHUCKS, KEYS & ADAPTOR SETS
DRILLING
TWISTED KNOT STEEL WIRE WHEEL BRUSH Suitable for use with 125 mm (5in) angle grinders with a 22.2 mm (7/8in) bore with a standard flange plate. Used when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.
Materials
Product Code
Ø (mm)
Wire Thickness
Max R.P.M
22
0.5
12,500
Singles 125HWT
125
STEEL WIRE WHEEL BRUSH WITH PLASTIC REDUCER SET Suitable for use with a bench grinder when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.
Shaft
Materials
Product Code
Ø (mm)
Shaft
Wire Thickness
Max R.P.M
32 32
0.3 0.3
6,000 4,500
Singles 150HWC 200HWC
150 200
CHUCKS, KEYS & ADAPTOR SETS 3/8” CHUCK & KEY SETS
1/2” KEYLESS CHUCK & SDS SETS
A traditional keyed chuck that fits drills with 3/8” shaft, sold with a key. Suitable for 1.5mm – 10mm drills bits.
Product Code
Capacity (mm/mount)
Sets C10
A keyless hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Sold with an SDS plus adaptor. Suitable for 1.5mm – 13mm drills bits.
Product Code
Capacity (mm/mount)
Sets 1.5 - 10mm, 3/8” x 24F
KKEY
1.5 - 13mm, 1/2” x 20F
Chucks continue on next page... 131
CHUCKS & KEYS
DRILLING
1/2” CHUCK, KEY & SDS SETS
HEAVY DUTY KEYLESS CHUCK
A traditional keyed chuck that fits drills with ½” shaft, sold with a key. Suitable for 1.5mm – 13mm drills bits.
A keyless hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits.
* SDS plus adaptor only with KEY
Product Code
Capacity (mm/mount)
Product Code
1.5 - 13mm, 1/2” x 20F 1.5 - 13mm, 1/2” x 20F
HDKC13
Sets C13 KEY*
Capacity (mm/mount)
Singles
CHUCK KEYS
1.5 - 13mm, 1/2” x 20F
SDS PLUS ADAPTORS
A replacement key for the traditional ½” keyed chuck. Product Code
Capacity (mm/mount)
Product Code
To fit 1/2” keyed chuck
SDSCA
Singles AS2
Singles
SUPER HEAVY DUTY CHUCK
132
A keyless single hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits.
Capacity (mm/mount)
Product Code
1.5 - 13mm, 1/2” x 20F
SHKC13
Singles SHDKC
SDS plus to 1/2” x 20M
SINGLE HANDED KEYLESS CHUCK
A keyless heavy duty handtightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 1000 watt. Suitable for 1.5mm – 13mm drills bits.
Product Code
Capacity (mm/mount)
Capacity (mm/mount)
Singles 1.5 - 13mm, 1/2” x 20F
DRILL SETS
DRILLING
HSS BRAD POINT DRILL SET Product Code
Drill Ø (mm)
Working L (mm)
Total L (mm)
Qty
B15SET
3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0 10.0
37 45 45 55 60 60 60 65 67 77 80
60 70 75 80 85 90 90 95 100 110 120
3 2 2 1 1 1 1 1 1 1 1
Product Code
Drill Ø (mm)
Working L (mm)
Total L (mm)
Qty
18 24 30 33 36 39 43 47 52 57 75 87
40 49 57 61 65 70 75 80 86 93 117 133
2 2 2 1 1 1 1 1 1 1 1 1
Bit Set - Qty 15
A 15 piece mixed selection of the most popular Brad Point wood drills. Sold in a robust weatherproof case.
HSS DRILL SET Bit Set - Qty 15
HSS15SET
A 15 piece mixed selection of the most popular HSS Ground Metal Drills with a 135° quick start split point. Sold in a robust weatherproof case.
1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.5 5.0 6.0 8.0 10.0
FLAT WOOD BIT SETS Product Code
Drill Ø (mm)
Total L (mm)
Qty
10.0 12.0 16.0 19.0 22.0 25.0 32.0
152 152 152 152 152 152 152
1 1 1 1 1 1 1
Bit Set - Qty 7
F7SET
A selection of quick release flat wood drills. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case.
133
DRILLING
DRILL SETS
MASONRY DRILL SET Product Code
Drill Ø (mm)
Working L (mm)
Total L (mm)
Qty
45 50 50 60 60 75 75
75 85 85 100 100 120 120
1 2 3 2 3 2 2
Bit Set - Qty 15 4.0 5.0 5.5 6.0 7.0 8.0 10.0
M15SET
A mixed selection of 15 carbide tipped Masonry Drills. The range covers the most popular hole sizes for plastic plugs. Sold in a robust weatherproof case.
HSS & MASONRY DRILL SET
Product Code
Drill Ø Working Total (mm) L (mm) L (mm)
Drill Type
Qty
HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS Masonry Masonry Masonry Masonry Masonry
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Bit Set - Qty 17
MIX17SET
A mixed selection of 12 HSS Ground Metal Drills with a 135° quick start split point and 5 carbide tipped Masonry Drills. Sold in a robust weatherproof case.
1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.5 4.8 5.0 5.5 6.0 5.0 5.5 6.0 7.0 10
18 24 30 33 36 39 43 47 55 55 60 65 50 50 60 60 75
40 49 57 61 65 70 75 80 85 86 93 93 85 85 100 100 120
CARPENTERS KIT
(SPEED AUGERS & FLAT WOOD BITS) Short length drill ideal for drilling in-between timber joists and studding when first fixing pipes and cables. Contains three four flute speed augers for rapid chip ejection and cleaner drilling and two flat bits for larger holes. Sold with a ¼ hex quick change shank. Ideal for use with an impact driver to further reduce overall tool and drill working length.
134
Product Drill Ø Code (mm)
Total L (mm)
Drill Type
Qty
159 159 159 152 152
4 Cutter Speed Auger 4 Cutter Speed Auger 4 Cutter Speed Auger Flat Wood Bit Flat Wood Bit
3 2 2 1 1
Bit Set - Qty 5 CKIT
16.0 20.0 25.0 32.0 40.0
CUTTING 136 - HOLESAWS 136 - HOLESAW ACCESSORIES 138 - HOLESAW KITS 139 - DRY DIAMOND CORE BITS 140 - DIAMOND CORE ACCESSORIES 141 - DIAMOND BLADES 142 - CERAMIC BLADES
142 - MORTAR RAKING BLADES 143 - CUP GRINDING WHEELS 143 - BONDED ABRASIVE DISCS 144 - JIGSAW BLADES 151 - RECIPROCATING SAW BLADES 155 - CIRCULAR SAW BLADES 157 - MULTI-TOOL BLADES
HOLESAWS
CUTTING
HOLESAWS - VARIABLE PITCH
Materials
Variable Pitch
A variable pitch tooth pattern which clears dust more efficiently and gives superior cutting performance in wood, plastic, non-ferrous metals and man-made boards. High quality M3 grade HSS steel cutting edge and compatible with most makes of arbor. Holesaw Kits available on page 130 Product Code
Threaded Saw Ø (mm) Mount (inch)
Product Code
Arbor to Suit
Singles HS14 HS16 HS17 HS19 HS20 HS21 HS22 HS24 HS25 HS27 HS29 HS30 HS32 HS35 HS37 HS38 HS40 HS41 HS43 HS44 HS46 HS48 HS51 HS52 HS54
Threaded Saw Ø (mm) Mount (inch)
Arbor to Suit
Singles 14.0 16.0 17.0 19.0 20.0 21.0 22.0 24.0 25.0 27.0 29.0 30.0 32.0 35.0 37.0 38.0 40.0 41.0 43.0 44.0 46.0 48.0 51.0 52.0 54.0
1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18
AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
HS57 HS60 HS64 HS65 HS67 HS68 HS70 HS73 HS76 HS79 HS83 HS86 HS89 HS92 HS95 HS98 HS102 HS105 HS108 HS111 HS114 HS121 HS127 HS140 HS152
57.0 60.0 64.0 65.0 67.0 68.0 70.0 73.0 76.0 79.0 83.0 86.0 89.0 92.0 95.0 98.0 102.0 105.0 108.0 111.0 114.0 121.0 127.0 140.0 152.0
1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18
AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
ARBORS
Product Code
For Holesaw Dia. (mm)
Shank
Thread Shank
14-30 14-30 32-210 14-30 32-210
Hex 9.5 Hex 11 Hex 11 SDS Plus SDS Plus
1/2” x 20 1/2” x 20 5/8” - 18 1/2” x 20 5/8” - 18
Singles
AA4
136
AA1
AA2
SDSA1
SDSA2
AA4 AA1 AA2 SDSA1 SDSA2
HOLESAWS
CUTTING
HOLESAWS - CONSTANT PITCH
Materials
Constant Pitch
A constant pitch tooth pattern ensures smooth cutting and less “chatter” when drilling metal, particularly thin sheet. High quality M42 grade 8% Cobalt HSS steel cutting edge and compatible with most makes of arbor. Holesaw Kits available on page 130
Product Code
Threaded Saw Ø (mm) Mount (inch)
Arbor to Suit
Product Code
AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
HSC51 HSC60 HSC64 HSC68 HSC70 HSC76 HSC79 HSC86 HSC89 HSC95 HSC102 HSC108 HSC111 HSC160 HSC165 HSC210
Singles HSC14 HSC16 HSC17 HSC20 HSC22 HSC25 HSC27 HSC30 HSC32 HSC35 HSC37 HSC40 HSC43 HSC46 HSC48
Threaded Saw Ø (mm) Mount (inch)
Arbor to Suit
Singles 14.0 16.0 17.0 20.0 22.0 25.0 27.0 30.0 32.0 35.0 37.0 40.0 43.0 46.0 48.0
1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18
51.0 60.0 64.0 68.0 70.0 76.0 79.0 86.0 89.0 95.0 102.0 108.0 111.0 160.0 165.0 210.0
5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18
AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
PILOT DRILLS & EXTENSION RODS HPD HPDL HPDC HSE
Product Code
Description
Length (mm)
HSS Pilot drill HSS Long pilot drill HSS Cobalt drill Extension rod for AA2 (arbor)
75 105 75 300
Singles HPD HPDL HPDC HSE
137
CUTTING
HOLESAW KITS
HOLESAW KIT (PLUMBERS) A mixed selection of 8 HSS M3 variable pitch holesaws and arbors. The range covers the most popular hole sizes to accommodate metric pipes. Product Code
Size (mm)
KIT
HSKITPL
17.0 24.0 30.0 34.0 43.0 52.0 14-30 32-210
Product Contents of Kit Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)
Kit Qty
1 1 1 1 1 1 1 1
HOLESAW KIT (ELECTRICIAN) A mixed selection of 9 HSS M3 variable pitch holesaws and arbors. The range covers the most popular hole sizes used when installing down-lights, conduit and wiring. Product Code
Size (mm)
KIT
HSKITEL
22.0 27.0 38.0 56.0 67.0 72.0 76.0 14-30 32-210
Product Contents of Kit Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)
Kit Qty
1 1 1 1 1 1 1 1 1
HOLESAW KIT (HANDY MAN) A mixed selection of 10 HSS M3 variable pitch holesaws and arbors. The range covers the most popular holesaw sizes. Product Code
Size (mm)
KIT
HSKITHA
138
17.0 20.0 25.0 30.0 38.0 43.0 52.0 72.0 14-30 32-210
Product Contents of Kit Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)
Kit Qty
1 1 1 1 1 1 1 1 1 1
DRY DIAMOND CORE BITS & KIT
DRY DIAMOND CORE BITS
CUTTING Materials
Manufactured using laser-welded technology, these cores have been specifically designed to drill large clean holes in masonry and concrete block. FOR ROTARY USE ONLY.
Product Code
Drill Ø (mm)
Length
Height
(mm)
(mm)
22 28 32 38 48 52 65 78 82 91 107 117 127 152
300 300 150 150 150 150 150 150 150 150 150 150 150 150
10 10 10 10 10 10 10 10 10 10 10 10 10 10
Singles GPCP22300 GPCP28300 GPCP32150 GPCP38150 GPCP48150 GPCP52150 GPCP65150 GPCP78150 GPCP82150 GPCP91150 GPCP107150 GPCP117150 GPCP127150 GPCP152150
DIAMOND CORE KIT Five of the most popular sizes with all the accessories required in a aluminium case. NOTE: Ideally suited to lightweight building materials up to 10n/mm2. Product Code
Drill / To Fit (mm)
KIT
PDCK5
38 52 65 117 127 1/2” BSP 1/2” BSP 1/2” BSP 8 8
Length (mm)
Description
Contents of Kit 150 Diamond Core 150 Diamond Core 150 Diamond Core 150 Diamond Core 150 Diamond Core 240 Extension 88 Hex Adaptor 115 SDS Adaptor 200 Pilot Drill 75 Taper Drift
Kit Qty
1 1 1 1 1 1 1 1 1
139
DRY DIAMOND CORE ACCESSORIES
CUTTING
DRY DIAMOND CORE ACCESSORIES BSP EXTENSION Product Code
Overall Length
Fit
(mm)
Singles
An ½” BSP thread extension rod used where there is need for a deeper hole.
DCE240P
HEX ADAPTOR
SDS ADAPTOR
An ½” Hex with ½” BSP (male) thread, for use with a standard core drill. Available in 88mm and 240mm lengths.
An SDS Plus with ½” BSP (male) thread, for use with an SDS-Plus drill, when in rotary mode only. Available in 115mm and 240mm lengths.
Product Code
Product Code
Overall Length (mm)
Fit
88 240
1/2” BSP 1/2” BSP
Singles
240
1/2” BSP
Overall Length (mm)
Fit
115 240
1/2” BSP 1/2” BSP
Singles
DCAH88P DCAH240P
DCAS115P DCAS240P
PILOT DRILL
PILOT ROD
Morse taper TCT masonry drill bit used to prevent the core drifting.
Morse taper rod used once a hole has been drilled to prevent the core drifting.
Product Code
Product Code
Drill Ø (mm)
Length (mm)
Singles DCPD13210
Ø (mm)
Length (mm)
Singles 13
210
DCPR225
12
225
TAPER DRIFT Product Code
Used for knocking morse taper tools out of spindles and sockets.
140
Ø (mm)
Length (mm)
Singles DCTD
8
75
DIAMOND BLADES
CUTTING
MULTI-PURPOSE BLADES Materials
CHIMAERA
PREMIUM LASER WELDED BLADE
A high quality multi-material blade designed for cutting construction materials. Continuous rim turbo segmented blade for smooth cutting of construction material and reinforced concrete.
A premium quality laser welded, turbo segmented blade. For use in building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone.
Product Code
Bore Segment (mm) Height (mm)
Product Code
22.2 22.2 22.2 20.0 22.2 20.0 25.4
GPPL115222 GPPL125222 GPPL230222 GPPL30020 GPPL300222 GPPL35020 GPPL350254 GPPL450254
Disc Ø Disc (mm) (inch)
Singles MM115222 MM125222 MM230222 MM30020 MM300222 MM35020 MM350254
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles 115 125 230 300 300 350 350
4 1/2 5 9 12 12 14 14
10 10 10 10 10 10 10
115 125 230 300 300 350 350 450
4 1/2 5 9 12 12 14 14 18
22.2 22.2 22.2 20.0 22.2 20.0 25.4 25.4
12 12 12 12 12 12 12 12
LASER WELDED BLADE
SINTERED BLADE
A cost effective laser welded blade with longer life than the sintered blades. For use in medium density building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone.
An economic product for cutting medium density building materials such as common bricks, paving slabs, kerbs and lintels.
Product Code
Bore Segment (mm) Height (mm)
Product Code
22.2 22.2 22.2 20.0
GPE115222 GPE230222 GPE30020
Disc. Ø Disc (mm) (inch)
Singles GPL115222 GPL125222 GPL230222 GPL30020
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles 115 125 230 300
41/2 5 9 12
10 10 10 10
115 230 300
41/2 9 12
22.2 22.2 20.0
7 7 7
141
DIAMOND BLADES
CUTTING
CERAMIC BLADES
Materials
For use with angle grinders and portable tile cutting machines. Suitable for cutting ceramic tiles, marble, porcelain and natural stone. Can be used wet or dry.
THIN TURBO
SINTERED
A top quality blade for cutting porcelain, ceramics and marble. Continuous turbo design for minimal chipping of the material, while the special thin body reduces resistance and increases speed of cut.
A cost effective blade for cutting porcelain, ceramics and marble. Continuous rim for minimal chipping of the material
Product Code
Bore Segment (mm) Height (mm)
Product Code
22.2
TE10016 TE115222
Disc. Ø Disc (mm) (inch)
Singles TP115222
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles 115
4 1/2
10
100 115
MORTAR RAKING BLADES
4 4 1/2
16.0 22.2
5 5
Materials
A product for raking mortar from between bricks prior to re-pointing.
SILVER BRAZED
SINTERED
A top quality product with 10mm silver brazed segments for a long service life.
An economic product with 7mm sintered segments.
Product Code
Bore Segment (mm) Height (mm)
Product Code
22.2 22.2
MRE115 MRE125
Disc. Ø Disc (mm) (inch)
Singles MRP115 MRP125
142
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles 115 125
4 1/2 5
10 10
115 125
4 1/2 5
22.2 22.2
7 7
GRINDING WHEEL & ABRASIVE DISC
CUTTING
CUP GRINDING WHEEL
Materials
A double row, silver brazed wheel for smoothing and removing shutter marks from medium density concrete. Product Code
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles CGDE115
115
4 1/2
22.2
10
BONDED ABRASIVE DISC
Materials
Used for cutting or grinding various types of metals. 1.0mm & 1.9mm are ideal for cutting stainless steel.
FOR CUTTING Product Code
Disc. Ø (mm)
FOR GRINDING Bore Thickness (mm) (mm)
Max RPM
Singles FCM115222 FCM230222 FCM30020 FCMT115222 FCMT125222 FCMT230222
Product Code
Disc. Ø (mm)
Bore Thickness (mm) (mm)
Max RPM
Singles 115 230 300 115 125 230
22.2 22.2 20.0 22.2 22.2 22.2
2.5 3.2 3.2 1.0 1.0 1.9
13,300 6,500 5,000 13,300 12,200 6,500
DGM11522
115
22.2
6.4
13,300
143
JIGSAW BLADES
CUTTING
HIGH CARBON STEEL BLADES FOR WOOD & PLASTIC High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards.
SOLD IN PACKS OF 5
MWS - MILLED & WAVY SET TEETH An economic blade to give a fine, clean, straight cut. SOFTWOOD
PLASTIC
MWS
CLEAN
STRAIGHT CUT BLADE (BOSCH EQUIV. - T119B)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2
13
50
76
7.8
1.00
2.0 - 15.0
Pack of 5 AHW12
CURVE CUT BLADE (BOSCH EQUIV. - T119BO) These blades have a reduced blade depth to allow them to perform curved cuts more easily.
Product Code
CURVED
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.35
19
50
76.5
4.5
1.25
1.5 - 15.0
Pack of 5 AHW12K
MSS - MILLED & SIDE SET TEETH An economic blade to give a coarse cut into softwood and plastic. SOFTWOOD
STRAIGHT CUT BLADE (BOSC
Product Code
PLASTIC
MSS
COARSE
H EQUIV. - T111C)
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
3
8.5
75
100
9.8
1.27
4.0 - 50.0
Pack of 5 AHG13
144
JIGSAW BLADES
CUTTING
SSS - SIDE SET & SHARPENED An economic blade to give a quick, coarse cut into wood SOFTWOOD
PLASTIC
SSS
COARSE
STRAIGHT CUT BLADE (BOSCH EQUIV. - T144D)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
4
6.35
75
100
7.8
1.27
5.0 - 50.0
Pack of 5 AHGS14
CURVE CUT BLADE (BOSCH EQUIV. - T244D) These blades have a reduced blade depth to allow them to perform curved cuts more easily.
Product Code
CURVED
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
4
6.35
75
100
6.5
1.27
5.0 - 50.0
Pack of 5 AHGS24
GTG - GROUND & TAPER GROUND TEETH An economic blade to give a clean cut in both wood and plastic. SOFTWOOD
PLASTIC
GTG
CLEAN
STRAIGHT CUT BLADE (BOSCH EQUIV. - T101D)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
4
6.35
75
100
7.8
1.45
10.0 - 45.0
Pack of 5 AHC14
STRAIGHT CUT BLADE (BOSCH EQUIV. - T101B)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2.5
10
75
100
7.8
1.45
3.0 - 30.0
Pack of 5 AHC12
145
JIGSAW BLADES
CUTTING
GTG - GROUND & TAPER GROUND TEETH An economic blade to give a clean cut in both wood and plastic.. SOFTWOOD
PLASTIC
GTG
PRECISION CUT BLADE (BOSCH EQUIV. - T101DP) This blade is made from a thicker plate to help achieve a 900 cut. It also makes this blade ideal for hardwood.
Product Code
CLEAN
HARDWOOD
PRECISION
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
4
6.35
75
100
7.8
1.68
10.0 - 45.0
Pack of 5 AHC14D
CURVE CUT BLADE (BOSCH EQUIV. - T101AO) These blades have a reduced blade depth to allow them to perform curved cuts more easily.
Product Code
LAMINATED
CURVED
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.35
19
50
76
4.5
1.25
1.5 - 15.0
Pack of 5 AHC12K
DOWN CUT BLADE (BOSCH EQUIV. - T101BR) Reversed teeth to cut on the down-stroke. This prevents the splintering of decorative surfaces such as kitchen worktops.
Product Code
LAMINATED
DOWN
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2.5 2.5
10 10
75 105
100 132
7.8 7.8
1.45 1.45
3.0 - 30.0 3.0 - 65.0
Pack of 5 AHC12R AHC32R
146
JIGSAW BLADES
CUTTING
PREMIUM BI-METAL BLADES
FOR WOOD & PLASTIC
Combining the flexibility of a high carbon steel body with a HSS hardened cutting edge, resulting SOLD IN in a tough, shatter resistant blade PACKS OF which keeps its edge. Longer 5 service life leads to greater cost effectiveness per blade.
SSS - SIDE SET & SHARPENED A premium blade to give a quick, coarse cut into wood. ALL WOOD
PLASTIC
SSS
COARSE
STRAIGHT CUT BLADE (BOSCH EQUIV. - T144DF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
4
6.35
75
100
7.8
1.27
5.0 - 50.0
Pack of 5 AHGS14BI
GTG - GROUND & TAPER GROUND TEETH A premium quality blade to give a clean cut in both wood and plastic.
ALL WOOD
PLASTIC
GTG
CLEAN
STRAIGHT CUT BLADE (BOSCH EQUIV. - T101BF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2.5
10
75
100
7.8
1.27
3.0 - 30.0
Pack of 5 AHC12BI
DOWN CUT BLADE (BOSCH EQUIV. - T101BRF) Reversed teeth to cut on the down-stroke. This prevents the splintering of decorative surfaces such as kitchen worktops.
Product Code
LAMINATED
DOWN
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2.5
10
75
100
7.8
1.27
3.0 - 30.0
Pack of 5 AHC12RBI
147
JIGSAW BLADES
CUTTING
HIGH CARBON STEEL BLADES
FOR METAL & PLASTIC
SOLD IN PACKS OF 5
Hardened high speed steel designed to cut hard materials such as mild steel, aluminium and other non-ferrous metals.
MWS - MILLED & WAVY SET TEETH An economic blade to give a fine, clean, straight cut. NON-FERROUS ALUMINIUM
MWS
STRAIGHT CUT BLADE (BOSCH EQUIV. - T118B)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2
13
50
76
7.8
1
2.5 - 6.0
Pack of 5 AMG12
STRAIGHT CUT BLADE (BOSCH EQUIV. - T318B)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.8
14
105
132
9.8
1
2.5 - 6.0
Pack of 5 AMG32
MSS - MILLED & SIDE SET TEETH An economic blade to give a fine cut. PLASTIC
NON-FERROUS ALUMINIUM
STEEL
MSS
STRAIGHT FINE CUT BLADE (BOSCH EQUIV. - T127D)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
3
8.50
75
100
7.8
1
3.0 -15.0
Pack of 5 AK14
CURVE FINE CUT BLADE (BOSCH EQUIV. - T227D) These blades have a reduced blade depth to allow them to perform curved cuts more easily.
Product Code
CURVED
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
3
8.50
75
100
6.5
1
3.0 -15.0
Pack of 5 AK24
148
JIGSAW BLADES
CUTTING
MWS - MILLED & WAVY SET TEETH FINE CUT BLADES An economic blade to give a fine, clean, straight cut.
SHEET
STEEL
MWS
STRAIGHT EXTRA FINE CUT BLADE (BOSCH EQUIV. - T118G) Extra fine cut enables this blade to cut very thin gauge sheet metal.
Product Code
SHEET METAL ONLY
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
0.7
36
50
76
7.8
1.0
0.5 - 1.5
Pack of 5 AMG107
STRAIGHT FINE CUT BLADE
SANDWICH
(BOSCH EQUIV. - T318A) Long blade to cut sandwich material up to 80mm
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1
25
105
132
9.8
1
1.0 - 3.0
Pack of 5 AMG31
STRAIGHT FINE CUT BLADE
SANDWICH
(BOSCH EQUIV. - T118A)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.2
21
50
76
7.8
1
1.2 - 3.0
Pack of 5 AMG11
CURVE FINE CUT BLADE (BOSCH EQUIV. - T218A) These blades have a reduced blade depth to allow them to perform curved cuts more easily.
Product Code
CURVED
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.2
21
50
76
6.4
1
1.2 - 2.0
Pack of 5 AMG21
149
JIGSAW BLADES
CUTTING
PREMIUM BI-METAL BLADES
FOR METAL & PLASTIC
SOLD IN PACKS OF 5
Combining the flexibility of a high carbon steel body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. Longer service life leads to greater cost effectiveness per blade.
MWS - MILLED & WAVY SET TEETH A premium quality blade to give a fine, clean, straight cut. STEEL
NON-FERROUS
INOX
MWS
STRAIGHT CUT BLADE (BOSCH EQUIV. - T118BF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2
13
55
76.5
7.8
1
2.5 - 6.0
Pack of 5 AMG12BI
STRAIGHT CUT BLADE (BOSC H EQUIV. - T118AF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.2
21
50
76
7.8
1
1.2 - 2.0
Pack of 5 AMG11BI
150
RECIPROCATING SAW BLADES
CUTTING
HIGH CARBON STEEL RECIPROCATING SAW BLADES
SOLD IN PACKS OF 5
High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards.
SSS - SIDE SET & SHARPENED An economic blade to give a quick, coarse cut into wood and plastic. SOFTWOOD
PLASTIC
SSS
COARSE
STRAIGHT CUT BLADE (BOSCH EQUIV. - S644D)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
4.2
6
130
150
19
1.27
6.0 - 100
Pack of 5 A3021-150
SSS - SIDE SET & SHARPENED An economic blade to give a quick, coarse cut into wood. GREENWOOD
SSS
COARSE
STRAIGHT CUT BLADE (BOSCH EQUIV. - S1531L)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
6.35
4-5
220
240
19
1.27
190
Pack of 5 A3029-240
WAVEY CUT A quick straight smooth cut. RUBBER
CARPET
STRAIGHT CUT BLADE (BOSCH EQUIV. - 2313AW)
Product Code
LEATHER
SOLD IN PACKS OF 3
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
-
-
280
300
19
1.27
250
Pack of 3 ARWM300
151
RECIPROCATING SAW BLADES
CUTTING
BI - METAL RECIPROCATING SAW BLADES
FOR CUTTING WOOD & PLASTIC
SOLD IN PACKS OF 5
MSS - MILLED & SIDE SET TEETH A premium blade to give a quick, coarse cut into wood and plasitc. SOFTWOOD
PLASTIC
MSS
COARSE
STRAIGHT CUT BLADE (BOSCH EQUIV. - S1411DF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
4.2
6
280
300
19
1.27
250
Pack of 5 A3021-300BI
FOR CUTTING METAL MSS - MILLED & SIDE SET TEETH A premium blade to give a quick, coarse cut. NON-FERROUS
STEEL
INOX
MSS
STRAIGHT CUT BLADE (BOSCH EQUIV. - S922BF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
2.5
10
260
280
19
0.9
3.0 - 5.0
Pack of 5 A3018-280
152
RECIPROCATING SAW BLADES
CUTTING
BI - METAL RECIPROCATING SAW BLADES
FOR CUTTING METAL
SOLD IN PACKS OF 5
MWS - MILLED & WAVY SET TEETH A premium blade to give a fine, clean, straight cut.
STEEL
INOX
MSS
STRAIGHT CUT BLADE (BOSCH EQUIV. - S922BF)
NON-FERROUS
Product Code
Pitch (mm)
1.8
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
14
130
150
19
0.9
3.0 - 8.0
Pack of 5 A3013-150
STRAIGHT CUT BLADE (BOSCH EQUIV. - S1122BF)
NON-FERROUS
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.8
14
180
225
19
0.9
3.0 - 8.0
Pack of 5 A3013-200
STRAIGHT CUT BLADE (BOSCH EQUIV. - S922AF)
SHEET METAL
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1
24
130
150
19
0.9
0.7 - 3.0
Pack of 5 A3015-150
STRAIGHT CUT BLADE (BOSCH EQUIV. - S1122AF)
SHEET METAL
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1
24
180
225
19
0.9
0.7 - 3.0
Pack of 5 A3015-200
153
RECIPROCATING SAW BLADES
CUTTING
BI - METAL RECIPROCATING SAW BLADES FOR CUTTING METAL
SOLD IN PACKS OF 5
MWS - MILLED & WAVY SET TEETH A premium blade to give a fine, clean, straight cut.
STEEL
INOX
MSS
STRAIGHT CUT BLADE (BOSCH EQUIV. - S922EF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.4
18
130
150
19
0.9
1.5 - 4.0
Pack of 5 A3014-150
STRAIGHT CUT BLADE (BOSCH EQUIV. - S1122EF)
Product Code
Pitch (mm)
T.P.I
Working Length (mm)
Total Length (mm)
Height (mm)
Width (mm)
Cut Depth (mm)
1.4
18
180
225
19
0.9
1.5 - 4.0
Pack of 5 A3014-200
154
CIRCULAR SAW BLADES
CUTTING
BLADES FOR WOOD Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials. ALL OUR BLADES CUT HARDWOOD, SOFTWOOD AND EXOTIC TIMBER.
COARSE / MEDIUM
MEDIUM
MEDIUM / FINE
EXTRA FINE
(GENERAL PURPOSE)
(COMBINATION)
(TRIMMING / CROSSCUT)
(FINE TRIM / FINISHING)
• Stone Fibre Board
• Plywood • Cement Bonded Board • Soft Fibre Board
• Veneers - Single & Double Sided • Plywood, Hardboard & MDF • Particle Board with Plastic Laminate On One Side
• Plywood • Cement Bonded Board • Soft Fibre Board
CIRCULAR SAW BLADES For use in corded and cordless circular saws with blade sizes 140mm to 315mm. Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Kerf (mm)
Bore (mm)
No. of Teeth
Cut Type
Bushing Ring Size (mm)
140 150 150 160 160 165 184 184 184 184 184 190 190 210 216 216 216 216 230 230 235 235 235 250 250 250 254 254 254 260 260 300 300 300 315 315 315
5 1/2 6 6 61/4 61/4 61/2 71/4 71/4 71/4 71/4 71/4 71/2 71/2 81/4 81/2 81/2 81/2 81/2 9 9 91/4 91/4 91/4 10 equiv. 10 equiv. 10 equiv. 10 10 10 101/4 101/4 117/8 117/8 117/8 123/8 123/8 123/8
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3
20 20 20 30 30 30 16 30 16 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
16 12 40 16 24 18 24 24 40 40 60 24 40 32 24 40 60 80 30 40 24 40 60 40 60 80 30 40 60 30 60 40 60 80 30 48 60
Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium / Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Extra Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium Medium / Fine Extra Fine Coarse / Medium Medium Medium / Fine Coarse / Medium Medium / Fine Medium Medium / Fine Medium / Fine Coarse / Medium Medium Medium / Fine
16.00 16.00 16 or 20 16 or 20 16 or 20 25.00 16 or 20 16 or 20 16 or 20 16,20 or 25.4 16,20 or 25.4 16,20 or 25.4 -
Singles C1402016 C1502012 C1502040 C1603016 C1603024 C1653018 C1841624 C1843024 C1841640 C1843040 C1843060 C1903024 C1903040 C2103032 C2163024 C2163040 C2163060 C2163080 C2303030 C2303040 C2353024 C2353040 C2353060 C2503040 C2503060 C2503080 C2543030 C2543040 C2543060 C2603030 C2603060 C3003040 C3003060 C3003080 C3153030 C3153048 C3153060
155
CIRCULAR SAW BLADES
CUTTING
CORDLESS TRIM SAW BLADES Designed for use with hand-held cordless circular saws, this range includes blades for use on all types of timber and man-made boards. Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Kerf (mm)
Bore (mm)
No. of Teeth
Cut Type
136 150 165 165 165 190
53/8 6 61/2 61/2 61/2 71/2
1.6 1.6 1.6 1.6 1.6 1.6
10 10 10 20 10 30
24 24 24 24 40 24
Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium
Singles T1361024 T1501024 T1651024 T1652024 T1651040 T1903024
ZERO DEGREE MITRE SAW BLADES For use with most mitre saws, these blades have precision ground teeth to give a clean and smooth cut in all types of timber and man-made boards.
Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Kerf (mm)
Bore (mm)
No. of Teeth
Cut Type
216 216 250 250
81/2 81/2 10 equiv. 10 equiv.
2.4 2.4 3 3
30 30 30 30
24 48 48 60
Coarse / Medium Medium / Fine Medium Medium / Fine
Singles Z2163024 Z2163048 Z2503048 Z2503060
BLADES FOR ALUMINIUM Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials. A range of blades for sizes 216, 250 and 305mm diameters.
FINE
(ALUMINIUM / PLASTIC) • Thin Walled Extrusions • Panels Of Aluminium • Plastic
-5 DEGREE ALUMINIUM BLADES A range of blades for sizes 216, 250 and 305mm diameters. Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Kerf (mm)
Bore (mm)
No. of Teeth
216 216 250 305 305 305
81/2 81/2 10 equiv. 12 12 12
2.4 2.4 2.4 3 3 3
30 30 30 30 30 30
60 80 80 48 60 80
Cut Type
Singles A2163060 A2163080 A2503080 A3053048 A3053060 A3053080
156
Fine Fine Fine Fine Fine Fine
MULTI-TOOL BLADES
CUTTING
TITANIUM COATED BI-METAL MULTI-TOOL BLADES
Materials
A high performance M42 bi-metal blade with a protective hardened titanium coat to improve performance and increase working life.
WOOD/METAL, RADIAL MULTI-TOOL BLADE
FLUSH CUT, WOOD/METAL MULTI-TOOL BLADE
Designed to cut hard/soft woods, ferrous and non-ferrous pipes, metal sheet and plastics. Also ideal for cutting laminated boards, parquet flooring and partition walls.
Ideal for a fine and straight cut into hard/softwoods, ferrous and non-ferrous pipes/sheet and plastics.
Product Code
Size Ø (mm)
Cutting Depth (mm)
Teeth Pitch
Product Code
87
26
1.3
MT32TN MT44TN
Singles MTR87TN
Size Ø (mm)
Cutting Depth (mm)
Teeth Pitch
32 44
54 54
1.4 1.4
Singles
BI-METAL MULTI-TOOL BLADES
Materials
A high performance M42 bi-metal blades.
WOOD/METAL, RADIAL MULTI-TOOL BLADE
FLUSH CUT, WOOD/METAL MULTI-TOOL BLADE
Designed to cut hard/soft woods, ferrous and non-ferrous pipes, metal sheet and plastics. Also ideal for cutting laminated boards, parquet flooring and partition walls.
Ideal for a fine and straight cut into hard/softwoods, ferrous and non-ferrous pipes/sheet and plastics.
Product Code
Size Ø (mm)
Cutting Depth (mm)
Product Code
87
26
MT32BI
Singles MTR87BI
Size Ø (mm)
Cutting Depth (mm)
Teeth Pitch
32
42
1.4
Singles
157
MULTI-TOOL BLADES
CUTTING
CARBON STEEL MULTI-TOOL BLADES
WOOD RADIAL MULTI-TOOL BLADE
FLUSH-CUT WOOD MULTI-TOOL BLADE
An economic blade with hardened teeth, designed to cut soft woods, plastics, plasterboard and other soft materials.
An economic blade with hardened teeth, designed for a fine, clean cut into hard/soft woods, plastics, plasterboard and soft materials.
Product Code
Size Ø (mm)
Cutting Depth (mm)
Singles MTR87
87
Product Code
Cutting Depth (mm)
Teeth Pitch
10 20
40 40
1.4 1.4
Singles MT10FT MT20FT
26
Size (mm)
FLUSH-CUT WOOD MULTI-TOOL BLADE
FLUSH-CUT WOOD MULTI-TOOL BLADE
An economic blade with hardened teeth, designed for a fine, clean cut into hard/soft woods, plastics, plasterboard and soft materials.
An economic blade with hardened teeth, designed for a fine, clean cut into hard/soft woods, plastics, plasterboard and soft materials.
Product Code
Size (mm)
Cutting Depth (mm)
Teeth Pitch
Product Code
32
42
1.4
MT69FT
Singles MT32FT
158
Materials
Size (mm)
Cutting Depth (mm)
Teeth Pitch
69
42
1.4
Singles
MULTI-TOOL BLADES
CUTTING
FAST-CUT WOOD MULTI-TOOL BLADE
FLUSH-CUT WOOD MULTI-TOOL BLADE
An economic blade with hardened teeth, designed to give a fast cut into soft woods, plastics, plasterboard.
An economic blade with hardened teeth, designed to give a fast rough cut into soft woods, plastics, plasterboard.
Product Code
Size (mm)
Cutting Depth (mm)
Teeth Pitch
Product Code
32
42
1.69
MT69CT
Singles MT32CT
Size (mm)
Cutting Depth (mm)
Teeth Pitch
69
42
1.69 V-Shape
Singles
SERRATED WAVY EDGE MULTI-TOOL SAW BLADE
SERRATED WAVY EDGE MULTI-TOOL SAW BLADE
An economic blade with hardened teeth, designed to give a fast rough cut into soft woods, plastics, plasterboard.
Ideal for many scraping applications such as removing paint, glues and silicone.
Materials
Materials
Product Code
Size (mm)
Cutting Depth (mm)
Product Code
69
42
MT52SC
Singles MT69SE
Size (mm)
Cutting Depth (mm)
52
35
Singles
159
MULTI-TOOL BLADES
CUTTING
CARBIDE GRIT, RADIAL MULTI-TOOL BLADE
DIAMOND BOOT MULTI-TOOL BLADE
Ideal for cutting tiles, porous concrete and plaster.
Designed to remove grout from in-between tiles. The boot design rapidly removes the grout without damaging the tiles.
Materials
Materials
CARBIDE GRIT
Product Code
Size Ø (mm)
Cutting Depth (mm)
Product Code
65
42
MTBOOT
Singles MT65CG
Size Ø (mm)
Singles 65
DELTA SANDING PAD
DELTA SANDING PAD
To be used in conjunction with the triangular sanding sheets for sanding wood, metal and plastics.
Universal use on most surfaces, the hook and loop backing makes it easy to remove from the sanding pad. Used in conjunction with the Multi-Tool Sanding Pad when working with wood, metal or plastic.
Materials
Materials
Product Code
Size Ø (mm)
Singles MT93SP
93
Product Code
Grit Range
Description
93 93 93 93 93
60 80 100 120 180
Coarse Medium Medium Medium Fine
Singles MTP60 MTP80 MTP100 MTP120 MTP180
160
Size (mm)
DRIVER BITS & ADAPTORS 162 - V5 IMPACT BITS 163 - S2 DRIVER BITS
164 - DRIVER BIT SETS 166 - ADAPTORS
V5 IMPACT DRIVER BITS
DRIVER BITS
V5 IMPACT DRIVER BITS Toughened for impact
V5 steel has been specifically designed to withstand the extreme pressures of an impact driver. These durable hardened and patented bits will extend the lifespan and gives optimum performance in all impact applications.
MIXED V5 DRIVER BIT SET
V5 PHILLIPS DRIVER BITS
Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver. Product Code
Size
Length (mm)
Qty
Handy Packs 1PH25V5 2PH25V5 3PH25V5 2PH50V5 3PH50V5
PH1 PH2 PH3 PH2 PH3
25 25 25 50 50
10 10 10 5 5
Product Code
Size
Length (mm)
Type
Qty
Pozi Phillips IM T Drive TIM Drive
2 2 1 1
Set V5MIXSET
PZ2 PH2 T25 T30
50 50 50 50
V5 POZI DRIVER BIT SET
V5 POZI DRIVER BITS
Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver. Product Code
Size
Length (mm)
Qty
Handy Packs 1CB25V5 2CB25V5 3CB25V5 1CB50V5 2CB50V5 3CB50V5
PZ1 PZ2 PZ3 PZ1 PZ2 PZ3
25 25 25 50 50 50
10 10 10 5 5 5
Product Code
Size
Length (mm)
Type
Qty
Pozi Pozi Pozi
1 3 2
Set PZ1 PZ2 PZ3
V5PZSET
V5 TIM DRIVE DRIVER BITS
50 50 50
V5 TIM DRIVE DRIVER BIT SET Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver.
Product Code
Size
Length (mm)
Qty
Handy Packs 20TX25V5 25TX25V5 30TX25V5 40TX25V5 30TX50V5
162
T20 T25 T30 T40 T30
25 25 25 25 50
10 10 10 10 5
Product Code
Size
Length (mm)
Type
Qty
TIM Drive TIM Drive TIM Drive TIM Drive
1 2 2 1
Set V5TXSET
T15 T20 T25 T30
50 50 50 50
S2 DRIVER BITS
DRIVER BITS
S2 DRIVER BITS Hardened steel bits
S2 Steel is a premium quality alloy steel for exceptional strength and durability over the standard chrome vanadium driver bits.
PHILLIPS DRIVER BITS
Product Code
Size
Length (mm)
Qty
Handy Packs 1PH25PACK 2PH25PACK 3PH25PACK 2PH50PACK 3PH50PACK
Product Code
25 25 25 50 50
10 10 10 5 5
PH 2 PH 2 PH 2
100 150 300
1 1 1
1CB25PACK 2CB25PACK 3CB25PACK 4CB38PACK 1CB50PACK 2CB50PACK 3CB50PACK
Size
Length (mm)
Product Code
T10 T15 T20 T25 T30 T40 T30
25 25 25 25 25 25 50
10 10 10 10 10 10 5
Size
Length (mm)
Qty
5.5 x 0.8 6.0 x 1.0 7.0 x 1.2 10.0 x 1.6
25 25 25 25
PZ 1 PZ 2 PZ 3 PZ 4 PZ 1 PZ 2 PZ 3
25 25 25 38 50 50 50
10 10 10 10 5 5 5
PZ 2 PZ 2 PZ 2
100 150 300
1 1 1
Size
Length (mm)
Qty
Handy Packs 2SQ25PACK 2SQ50PACK
No.2 No.2
25 50
10 5
No.2
25
2
Twin Packs 2SQ25GB
HEX DRIVER BITS
Product Code
Size
Length (mm)
Qty
Twin Packs
Twin Packs 5508SL25GB 6010SL25GB 7012SL25GB 1016SL25GB
Qty
SQUARE DRIVER BITS
SLOTTED DRIVER BITS
Product Code
(mm)
Qty
Handy Packs 10TX25PACK 15TX25PACK 20TX25PACK 25TX25PACK 30TX25PACK 40TX25PACK 30TX50PACK
Length
Mini Bit Packs 2CB100GB 2CB150GB 2CB300GB
TIM DRIVE DRIVER BITS
Product Code
Size
Handy Packs PH 1 PH 2 PH 3 PH 2 PH 3
Mini Bit Packs 2PH100GB 2PH150GB 2PH300GB
POZI DRIVER BITS
2 2 2 2
3HX25GB 4HX25GB 5HX25GB 6HX25GB 8HX25GB
3.0 4.0 5.0 6.0 8.0
25 25 25 25 25
2 2 2 2 2
163
DRIVER BIT SETS
DRIVER BITS
DRIVER BIT SETS V5 IMPACT DRIVE BIT SET
31 PIECE S2 DRIVER BIT SET
Mixed selection of 25mm impact resistant driver bits and a magnetic adaptor, specifically designed for use with an impact driver. Product Code
Size
Length
Type
(mm)
Qty
Comprehensive 31 piece assorted case containing the most commonly used 25mm driver bits and a quick release adaptor. Convenient protective case with TPE (Rubber) corners and a handy belt clip. Product Code
Phillips Pozi Pozi Pozi IM T Drive IM T Drive TIM Drive TIM Drive
1 1 2 1 1 1 1 1 1 DBSETG31
24 PIECE S2 POUCH BIT SET A handy canvas pouch consisting of a mixed selection of the most popular 50mm driver bits with a quick release screw driver. Ideal for maintenance and repair.
Product Code
Size
Length (mm)
Type
Qty
Set - Qty 24
POUCHSET
164
PH1 PH2 PH3 PZ1 PZ2 PZ3 T15 T20 T25 T30 H3 H4 H5 1/4�
50 50 50 50 50 50 50 50 50 50 50 50 50 -
Phillips Phillips Phillips Pozi Pozi Pozi
1 3 1 1 3 1 IM T Drive 1 IM T Drive 2 TIM Drive 2 IM T Drive 2 Hex 1 Hex 1 Hex 1 Quick Release 1
Length (mm)
Type
Qty
Set - Qty 31
Set - Qty 10 PH2 25 PZ1 25 PZ2 25 PZ3 25 V5MEDSET T15 25 T20 25 T25 25 T30 25 Quick Release Adapter
Size
PZ1 25 Pozi PZ2 25 Pozi PZ3 25 Pozi Hex H4.0 25 Hex H5.0 25 Hex H6.0 25 Hex H7.0 25 3.5 25 Slotted 4.5 25 Slotted 5.0 25 Slotted 5.5 25 Slotted 8.0 25 Slotted T10 25 TIM Drive T15 25 TIM Drive T20 25 TIM Drive T25 25 TIM Drive T30 25 TIM Drive T40 25 TIM Drive PH1 25 Phillips PH2 25 Phillips PH3 25 Phillips 2.0 25 Square Quick Release Adapter
1 5 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 1 1
DRIVER BIT SETS
DRIVER BITS
DRIVER BIT SETS DRIVER BIT & HSS DRILL SET
MIXED DRIVER BIT SET
A selection of quick release HSS Ground Metal Drills, S2 driver bits, Socket Drivers and a Magnetic adaptor. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case.
A 37 piece mixed selection of the most popular 25mm and 50mm S2 driver bits with a magnetic adaptor and an assortment of socket drivers. Sold in a robust weatherproof case.
Product Code
Product Code
Size (mm)
Type
Qty
Bit Set - Qty 20
MIX20SET
1.5 2.0 3.0 3.5 4.0 4.5 5.0 6.0 PH1 PH2 PH3 PZ1 PZ2 PZ3 5.0 6.0 6.0 8.0 10.0 -
Size (mm)
Length (mm)
Type
Qty
Bit Set - Qty 37 HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit Phillips Phillips Phillips Pozi Pozi Pozi Slotted Slotted Nut Driver Nut Driver Nut Driver Quick Changer
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
BIT37SET
4.0 4.5 5.5 6.0 6.5 7.0 PH1 PH2 PH3 PZ1 PZ2 PZ3 T10 T15 T20 T25 T27 T30 T40 3.0 4.0 5.0 5.5 6.0 PH1 PH2 PH3 PZ1 PZ2 PZ3 5.5 7.0 5 6 8 10
25 Slotted 25 Slotted 25 Slotted 25 Slotted 25 Slotted 25 Slotted 25 Phillips 25 Phillips 25 Phillips 25 Pozi 25 Pozi 25 Pozi IM 25 T Drive IM 25 T Drive 25 TIM Drive 25 TIM Drive 25 TIM Drive 25 TIM Drive 25 TIM Drive 25 Hex 25 Hex 25 Hex 25 Hex 25 Hex 50 Phillips 50 Phillips 50 Phillips 50 Pozi 50 Pozi 50 Pozi 50 Slotted 50 Slotted Nut Driver Nut Driver Nut Driver Nut Driver Magnetic Bit Holder
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
165
ADAPTERS
DRIVER BITS
SOCKET DRIVERS & ADAPTORS SOCKET DRIVERS
Product Code
Length
Size
(mm)
Type
Pack Qty
Mini Bit Packs Also known as a 1/4” Nut Setter. Used for installing hexagon headed fasteners with a power tool.
516SDB 635SDB 6SDB 10SDB 11BHSDB 13SDB
5/16” 1/4” 6mm 10mm 11mm 13mm
65 65 65 65 65 65
Hex Hex Hex Hex Bi-Hex Hex
1 1 1 1 1 1
5/16” 10mm
65 65
Hex Hex
20 20
Bit Packs 516SDJ 10SDJ
ONE PIECE ADAPTORS
TWO PIECE ADAPTORS
A magnetic 1/4” hex drive adaptor machined from a single piece of stainless steel to give extended life and durability. Available with or without a circlip to improve bit retention. Product Code
Length (mm)
Type
Qty
Circlip
1 1
Mini Bit Packs 60MASSB 60MASSCB
60 60
Quick Release An economic magnetic 1/4” hex drive adaptor manufactured from two pieces of carbon steel. Available with or without a circlip to improve bit retention or with a quick release collar.
REGULAR Product Code
Length
Type
Qty
60 60 150 300
Circlip Circlip Circlip
1 1 1 1
60 60
Circlip
20 20
Type
Pack Qty
60 150 300
Circlip Circlip Circlip
1 1 1
60
Circlip
20
(mm)
Mini Bit Packs
SDS ADAPTORS
60MAB 60MACB 150MACB 300MACB
Bit Packs A magnetic SDS Plus to 1/4” hex drive adaptor, ideal for converting your SDS-Plus drill in to a screwdriver when in rotary mode only. Product Code
Length (mm)
Type
Qty
1/4
1
Mini Bit Packs 80MASDSCB
60MAJ 60MACJ
QUICK RELEASE Product Code
Length (mm)
Mini Bit Packs 80
60MAQRB 150MAQRB 300MAQRB
Bit Packs 60MAQRJ
166
HAND TOOLS & ACCESSORIES 168 - KINIFE BLADES 169 - HACKSAW FRAMES 170 - HACKSAW BLADES
170 - TAPE MEASURE 171 - HAND WIRE BRUSHES
UTILITY KNIFE BLADES
HAND TOOLS & ACCESSORIES
KNIFE BLADES Longer Life Super Sharp
Durable
MANUFACTURED USING
SK2 STEEL
MORE CUTS
SK2 Steel gives a longer life and a sharper cut.
HOOKED KNIFE BLADES
UTILITY KNIFE BLADES
Sharpe point for penetrating and cutting sheet material in particular floor coverings and plastic sheeting. Manufactured using SK2 steel to give a longer life and a sharper cut. For general purpose cutting of linoleum, plastic, wood, carpet, cardboard etc.
Compatible with all standard utility knives. Manufactured using SK2 steel to give a longer life and a sharper cut. For general purpose cutting of linoleum, plastic, wood, carpet, cardboard etc.
Product Code
Blade Size
Qty
51 x 19 x 0.6
10
Pack HBDISP
SNAP OFF KNIFE BLADES 18mm
HD12HSF Product Code
9mm
Snap off blades for standard retractable knives. Multiple cutting edges for longer life. Manufactured using SK2 steel to give a longer life and a sharper cut. For general purpose cutting of linoleum, plastic, wood, carpet, cardboard etc. Product Code
Blade Size
Pack Qty
9 18
10 10
Packs UBSNAP9 UBSNAP18
168
UBHANG
UBCASE
Blade Size
Qty
60 x 90 x 0.6 60 x 90 x 0.6 60 x 90 x 0.6
10 50 100
Packaging HD12HSF UBHANG UBCASE
HACKSAW FRAMES
HAND TOOLS & ACCESSORIES
HACKSAW FRAMES
LARGE HACKSAW
LIGHTWEIGHT HACKSAW
A professional quality high tension hacksaw frame, with an ergonomic and comfortable TPR grip handle. The storage compartment in the frame includes four additional bi-metal blades with different teeth configuration for multiple cutting applications.
Toughened steel frame with an ergonomic rubber handle, includes one 24 TPI blade.
Product Code
Product Code
Blade Size (Imp.)
Singles
Blade Size (Imp.)
Singles
HD12HSF
12”
12HSF
12”
MINI HACKSAW
JUNIOR HACKSAW
Die-cast aluminium frame with a soft grip rubber handle. Ideal for difficult to reach areas. Will accept 250-300mm hacksaw blades. Supplied with one 300mm (12”) 24 TPI blade.
Die-cast aluminium frame with a soft grip rubber handle, includes one 24 TPI SK4 blade.
Product Code
Product Code
Blade Size (Imp.)
Singles 12MHSF
Blade Size (Imp.)
Singles 12”
6JHSF
6”
169
HAND TOOLS & ACCESSORIES
HACKSAW BLADES & TAPE MEASURE
HACKSAW BLADES
BI-METAL HACKSAW BLADES
Choose fine pitch (32T) for thinner materials, a coarser pitch (18T) for thicker steel. The teeth should point towards the front of the saw and cut on the push stroke. Ideally, at least three teeth should be in the material.
Product Code
Overall Length (mm)
Teeth Per Inch
Qty
300 300 300
18 24 32
5 5 5
Overall Length (mm)
Teeth Per Inch
Qty
150
24
5
Pack HSB18P5 HSB24P5 HSB32P5
JUNIOR HACKSAW BLADES
General purpose 150mm junior hacksaw blades with 24 teeth per inch and pinned ends for secure fitting. Ideal for plastic and metal pipe cutting. Fits all standard junior hacksaw frames.
Product Code
Pack SK4JB
TAPE MEASURE Ergonomic shock resistant easy grip rubber jacket for comfortable non-slip grip. A five meter super strength matt nylon coated steel blade with metric & inch measurements ideal for the professional user.
Product Code
Size (m x mm)
Singles TM5M
170
5 x 19
WOODEN HANDLE SCRATCH BRUSHES
HAND TOOLS & ACCESSORIES
WOODEN HANDLE SCRATCH BRUSHES Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. (Stainless steel reduces contamination of the base material)
STEEL & STAINLESS STEEL
STEEL WITH SCRAPER
Product Code
Product Code
W L (mm) (mm)
No. of Rows
Material
3 x 18 4 x 18 3 x 16 4 x 16
Steel Steel Stainless Steel Stainless Steel
Singles 3SBHD 4SBHD 3SBSS 4SBSS
295 295 295 295
A moisture and chemical resistant ergonomic handle. Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. W L (mm) (mm)
No. of Rows
Material
4 x 15 6 x 15
Steel Steel
Singles 4SBP 6SBP
No. of Rows
Material
4 x 18
Steel
Singles 28 33 28 33
PLASTIC HANDLE SCRATCH BRUSHES
Product Code
W L (mm) (mm)
4SSBHD
33
295
WIRE HAND BRUSHES
A high density wire brush with an ergonomic plastic handle. Ideal for a more aggressive removal of paint, rust, scale, grout or dirt. Sold in three brush types to suit a variety of applications. Product Code
L (mm)
Material
255 255 255
Steel Stainless Steel Brass
Singles 30 41
280 280
RWHB BWHB YWHB
FILE CLEANING BRUSH For cleaning embedded filings from both wood and metal files. Product Code
No. of Rows
Material
110 x 40
Steel
Singles FCB
171
PROTECTION & ADHESIVES 173 - HEAVY DUTY CLOTH TAPE 173 - CLOTH TAPE 173 - PVC BUILDERS TAPE 173 - DOUBLE SIDED CLOTH TAPE 174 - MASKING TAPE 174 - PACKAGING TAPE 174 - ALUMINIUM FOIL TAPE
174 - PVC TAPES 175 - ANTI-SLIP TAPE 175 - HAZARD TAPE 175 - BARRIER TAPE 176 - SHIELD PROTECTIVE FILMS 176 - SHIELD BUILDERS WIPES 177 - SHIELD DUST SHEETS
TAPES
PROTECTION & ADHESIVES
HEAVY DUTY CLOTH TAPE
DOUBLE SIDED CLOTH TAPE
Available in:
Available in:
Black
Silver
White
A super-strength tape. Water resistant and extremely durable, this industrial quality tape is designed to be used in multiple indoor and outdoor applications.
Product Code
Length
Width
(m)
(mm)
50 50 50
50 50 50
Colour
Qty
Black Silver White
1 1 1
Packs HDCTBLACK HDCTSILVER HDCTWHITE
Product Code
Length
Width
(m)
(mm)
25
50
Colour
Qty
White
1
Packs
CLOTH TAPE Available in:
White
A strong double sided cloth tape designed to stick two surfaces together where an invisible joint is required. Ideal for fixing carpets, signs and protective sheeting to multiple surfaces.
Black
Silver
White
A medium quality cloth tape used to repair, fasten, bundle, strengthen, mark, plus much more.
DSCT
HIGH STRENGTH PVC BUILDERS TAPE Available in:
Black
A strong versatile PVC tape used for jointing PVC and polythene sheets and membranes. Frequently used for sealing contamination barriers, polythene dust sheets, silage covers and bales.
Product Code
Length
Width
(m)
(mm)
50 50 50
48 48 48
Colour
Qty
Black Silver White
1 1 1
Packs CTBLACK CTSILVER CTWHITE
Product Code
Length
Width
(m)
(mm)
33
75
Colour
Qty
Black
1
Packs HSBT
173
TAPES
PROTECTION & ADHESIVES
PACKAGING TAPE
3 DAY MASKING TAPE
Available in:
Available in:
Clear
Brown
A quality tape giving you an instant and secure fixture, ideal for sealing boxes, attaching labels and general packing applications.
Product Code
Length
Width
(m)
(mm)
50 50
48 48
Colour
Qty
Clear Brown
3 3
Packs PTC PTB
Product Code
Length
Width
(m)
(mm)
50 50 50
25 38 50
Colour
Qty
Cream Cream Cream
1 1 1
Packs MT25 MT38 MT50
ALUMINIUM FOIL TAPE
PVC INSULATION TAPE
Available in:
Available in:
Silver
Red
Used in jobs requiring moisture and chemical resistance, thermal conductivity, flame resistance, heat and light reflectance and is weather resistant. Perfect for joining foil covered insulation, sealing off pipes and ducts.
Product Code
Length
Width
(m)
(mm)
45 45 45
50 75 100
Colour
Qty
Silver Silver Silver
1 1 1
Packs AFT50 AFT75 AFT100
174
Cream
A general purpose masking tape for professional results. Designed to be easily removed for up to three days without leaving residue or damaging the surface.
Brown
White
Black Blue
Green
Grey Yellow
Yellow Green
Ideal for insulating electrical wires and joints. Easily torn by hand, can be written on and cleanly removed from smooth surfaces. Product Code
Length
Width
(m)
(mm)
25 25 25 25 25 25 25 25 25
18 18 18 18 18 18 18 18 18
Colour
Qty
Black White Grey Red Blue Green Yellow Brown Green/Yellow
10 10 10 10 10 10 10 10 10
Packs ITBLACK ITWHITE ITGREY ITRED ITBLUE ITGREEN ITYELLOW ITBROWN ITGYSTRIPE
TAPES
BARRIER TAPE Available in:
Red White
ANTI-SLIP TAPE Available in:
Black Yellow
A durable non-adhesive polythene barrier tape, ideal for marking out hazardous areas. Can be used internally and externally. Available in 100 & 500 metre rolls. The 500m comes in a convenient dispensing box for easy storage and application
Product Code
Length
Width
(m)
(mm)
Colour
Qty
Red/White Yellow/Black Red/White Yellow/Black
1 1 1 1
Packs / Boxed* BART
Black Yellow
Black
Manufactured using a high grade P60 grit to offer excellent grip, commonly used where there is risk of slip hazards such as stairs, shop fronts, ramps and paths etc. Three layers of Acrylic Solvent glue gives excellent adhesion to multiple surfaces.
Product Code
Length
Width
(m)
(mm)
10 10
50 50
Colour
Qty
Black/Yellow Black
1 1
Packs
100 100 500 500
BARTYB BART500* BARTYB500*
PROTECTION & ADHESIVES
70 70 70 70
ASTSTRIPE ASTBLACK
HAZARD TAPE Available in:
Black Yellow
A durable self adhesive PVC hazard tape, ideal for marking floors, walls and hazardous areas. Can be used internally and externally.
Product Code
Length
Width
(m)
(mm)
33
50
Colour
Qty
Black/Yellow
1
Packs HAZT
175
PROTECTION & ADHESIVES
SHIELD EXTRA TOUGH BUILDERS WIPES
Product Code
SHIELD HEAVY DUTY BUILDERS WIPES
Multi use wipes formulated to clean and remove wet and semi-cured paint, grease, glues, sealant, adhesive, bitumen, tar, expanding foam, oil, silicone and permanent marker. Contains aloe vera and anti-bacterial additive.
A heavy duty textured wipe designed to remove the most stubborn substances, such as paint, grease, glue, sealant, adhesives, bitumen, tar, expanding foam and many other wet and semi-cured substance.
• 100 pack qty • Textured finish
• 75 pack qty • Textured finish
Wipes Qty
Packs SCRUB
WIPES & PROTECTIVE FILMS
Wipes Qty
Product Code
Packs 100
SHIELD PROTECTIVE FILMS
HDSCRUB
75
Shield protective film is a highly effective selfadhesive product, giving protection from foot traffic, debris, spills etc. Easy to apply, the film can be left for up to 30 days before simple removal. Note: Please ensure you have read and fully understood the usage guidelines before installation.
Product Thickness Width Length (mm) (m) (mm) Code
Type
Rolls 25CP 50CP 100CP 25HP 50HP 25WP 50WP
176
0.05 0.05 0.05 0.05 0.05 0.05 0.05
600 600 600 600 600 600 600
25 50 100 25 50 25 50
Carpet Carpet Carpet Hard Surface Hard Surface Glass Glass
DUST SHEETS
PROTECTION & ADHESIVES
SHIELD PROFESSIONAL DUST SHEETS
SHIELD LAMINATED DUST SHEETS
High quality dust sheet for multiple uses including floor and furniture covering during decoration.
The same high quality dust sheet with a lamination to greatly reduce risk of paint and liquid soak-through.
Product Code
Length
Width
(ft)
(ft)
12 12
9 12
Qty
Packs CDS129 CDS1212
1 1
Product Code
Length
Width
(ft)
(ft)
12
9
Qty
Packs CDSL129
1
SHIELD PROFESSIONAL DUST SHEETS High quality and cut to a convenient width to suit standard staircases avoiding need to fold and therefore reducing risk of trips and falls.
Product Code
Length
Width
(ft)
(ft)
24
3
Qty
Packs CDSS243
1
177
DOOR ACCESSORIES 179 - TUBULAR LATCHES 179 - ADJUSTABLE ROLLER CATCHES 179 - BALES CATCHES 180 - MAGNETIC CATCHES 180 - DOUBLE ROLLER CATCHES 180 - DOUBLE BALL CATCHES
180 - MODESTY BLOCKS 180 - KNOCK DOWN BLOCKS 181 - PVC DOOR STOPS 181 - PVC DOOR WEDGES 181 - SPRING DOOR STOPS
LATCHES & CATCHES
DOOR ACCESSORIES
DOOR ACCESSORIES A comprehensive range of door and cupboard accessories for a variety of applications.
TUBULAR LATCHES -
Brass
Nickel
Designed for use on internal doors with a lever handle. Supplied with matching strike plate in electro brass or nickel plated finishes. Product Code
Size HxWxD (mm)
Hole 0 in Strike Plate (mm)
Hole 0 in Catch (mm)
Finish
Qty
5.5 5.5
6.0 6.0
Electro Brass Nickel
1 1
Packs TLBRASS63P 60 x 25 x 67 TLNICKEL63P 60 x 25 x 67
ADJUSTABLE ROLLER CATCHES -
Brass
Nickel
Used for securing internal doors that require just a push/pull handle. Adjustable roller to adjust the closing tension of the door. Supplied with matching strike plate in electro brass or nickel plated finishes.
Product Code
Size HxWxD (mm)
Hole 0 in Strike Plate (mm)
Hole 0 in Catch (mm)
Finish
Qty
4.4 4.4
5.9 5.9
Electro Brass Nickel
1 1
Packs ARCBRASSP 59 x 23.5 x 39 ARCNICKELP 59 x 23.5 x 39
BALES CATCHES -
Brass
Used for securing internal doors that require just a push/pull handle. Supplied with matching strike plate in electro brass. Product Code
Size HxWxD (mm)
Hole 0 in Strike Plate (mm)
Hole 0 in Catch (mm)
Finish
Qty
57 x 23 x 20
3.7
4.2
Electro Brass
1
Packs BC19P
179
CATCHES & BLOCKS
DOOR ACCESSORIES
MAGNETIC CATCHES Product Code
A surface mounted light duty catch for securing cupboard or cabinet doors.
Colour
Qty
40 x 22 x 12 58 x 22 x 16
4.0 6.0
White White
2 2
Zinc Product Code
A surface mounted push fit catch for securing cupboard or cabinet doors.
A solid brass push fit catch for securing cupboard or cabinet doors.
Strength (kg)
Packs MC4P MC6P
DOUBLE ROLLER CATCHES -
DOUBLE BALL CATCHES -
Size LxWxH
Size (mm)
Hole  (mm)
Finish
Qty
28 x 32
4.5
Zinc
2
Packs DRP
Brass
Chrome Product Code
Size (mm)
Finish
Qty
43 x 8.0 50 x 8.5 43 x 8.0 50 x 8.5
Electro Brass Electro Brass Chrome Satin Chrome Satin
2 2 2 2
Packs DBC40BRASSP DBC50BRASSP DBC40CHROMEP DBC50CHROMEP
MODESTY BLOCKS Used for the assembly of boards at 90 degrees.
Product Code
Size LxWxH
0 (mm)
Hole
34 x 13 x 13 34 x 13 x 13
4.8 4.8
Size LxWxH
0 (mm)
35 x 25 x 12 35 x 25 x 12
4.9 4.9
Colour
Qty
White Brown
2 2
Colour
Qty
White Brown
2 2
Packs MBWHITEP MBBROWNP
KNOCK DOWN BLOCKS Used for the assembly of boards at 90 degrees. Secured with a bolt into the thread of the second block which draws the two fittings together.
180
Product Code
Hole
Packs KDWHITEP KDBROWNP
DOOR STOPS & WEDGES
DOOR ACCESSORIES
PVC DOOR STOPS Product Code
A floor mounted door stop used to prevent doors from damaging walls.
Size LxWxH
0 (mm)
Hole
21 x 32 21 x 32
6.0 6.0
Size LxWxH
0 (mm)
DWEDGE
136 x 43 x 29
4.4
Product Code
Size LxWxH
0 (mm)
78 x 24 78 x 24
4.0 4.0
Colour
Qty
Black White
2 2
Colour
Qty
Grey
2
Colour
Qty
Black Nickel
2 2
Packs DSBLACKP DSWHITEP
PVC DOOR WEDGES Product Code
A triangular shaped wedge used to temporarily stop doors from closing.
SPRING DOOR STOPS -
Hole
Packs
Brass
A wall or skirting board mounted door stop used to prevent doors from damaging walls.
Nickel Hole
Packs SSBRASSP SSNICKELP
Available in Yellow, Zinc, Black & Stainless Steel See pages 12-14 Mixed Trays on page 20
To BS EN
ISO 1459
2:2008
181
SECURITY SOLUTIONS 183 - WEATHERPROOF PADLOCKS 183 - LAMINATED PADLOCKS 183 - COMBINATION PADLOCKS 184 - BRASS PADLOCKS 184 - RECTANGULAR PADLOCKS 185 - DISC PADLOCKS 185 - STAINLESS STEEL PADLOCK
186 - SAFES & CASES 186 - CABLE LOCK 186 - CABLES & CHAINS 187 - RATCHET STRAPS 188 - TIE DOWNS 189 - BUNGEE CORDS
PADLOCKS
SECURITY SOLUTIONS
WEATHERPROOF PADLOCKS A laminated padlock with a durable vinyl cover to enhance corrosion resistance and improve weatherproofing.
SECURITY RATING
IDEAL FOR:
Sheds
Product Code
WEATHER RATING
Gates
Chains
Size Shackle Gauge Security Keys Qty (mm) (mm) Rating
Packs WP40
40
8
5
3
1
LAMINATED PADLOCKS An economic padlock ideal for lower security applications.
SECURITY RATING
WEATHER RATING
IDEAL FOR:
Sheds
Gates
Chains
STANDARD SHACKLE Product Code
LONG SHACKLE
Size Shackle Gauge Security Keys Qty (mm) Rating
(mm)
Packs LSP40 LSP50
Product Code
Size Shackle Gauge Security Keys Qty (mm) Rating
(mm)
Packs 40 50
6.1 8.8
5 6
3 3
1 1
LSP40L LSP50L
40 50
6.1 8.8
4 5
3 3
1 1
COMBINATION PADLOCKS A key-less solution commonly used on luggage, tool boxes and storage lockers. IDEAL FOR:
WEATHER RATING
Luggage Toolboxes
Product Code
SECURITY RATING
Storage Lockers
Size Shackle Gauge Security Dials Qty (mm) Rating
(mm)
Packs CP21 CP28 CP38
21 28 38
3.1 5 6
1 2 3
3 4 4
1 1 1
183
PADLOCKS
SECURITY SOLUTIONS
BRASS PADLOCKS
SECURITY RATING
A durable medium security padlock used for a variety of applications.
WEATHER RATING
IDEAL FOR:
Luggage
Cabinets
Sheds
Gates
STANDARD SHACKLE
LONG SHACKLE
Size Shackle Gauge Security Keys Qty (mm) (mm) Rating
Product Code
Product Code
Packs
Size Shackle Gauge Security Keys Qty (mm) Rating
(mm)
Packs
P30 P40 P40X2 P50 P60
30 40 40 50 60
5.2 6.3 6.3 8.1 9.5
3 5 5 6 7
3 3 3 3 3
1 1 2 1 1
P40L P50L
40 50
6.3 8.1
4 5
3 3
1 1
BRASS PADLOCKS - KEY ALIKE
SECURITY RATING
Set of four identical brass padlocks having the same key code so all four keys enclosed will fit each lock within the pack. This is convenient where numerous locks are to be used by the same group of people or person. A durable medium security padlock used for a variety of applications.
WEATHER RATING
IDEAL FOR:
Luggage
Cabinets
Sheds
Gates
Product Code
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
40
6.3
5
4
4
Packs P40KA
BRASS RECTANGULAR PADLOCKS A high security padlock used for securing chain, shuttering and catches where there is a risk of cropping, hacksaw or hammer attacks. IDEAL FOR:
Chains
Product Code
Shutters
Garages
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
75
11.7
8
3
1
Packs RP75
184
SECURITY RATING
WEATHER RATING
PADLOCKS
SECURITY SOLUTIONS
ARMOURED RECTANGULAR PADLOCKS A durable high security padlock used for securing chain, shuttering and catches where there is a risk of cropping or hacksaw attacks.
SECURITY RATING
WEATHER RATING
IDEAL FOR:
Chains
Shutters
Product Code
Garages
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
90
12
9
3
1
Packs ARP90
STAINLESS STEEL PADLOCK A medium to high security padlock designed to handle extreme weather conditions. The shrouded shackle ensures maximum resistance against cutting and prying. Ideal for shutters, gates, garages and sheds SECURITY RATING
IDEAL FOR:
Chains
Product Code
Shutters
WEATHER RATING
Garages
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
50
8
6
3
1
Packs SS50SS
DISC PADLOCKS A corrosion resistant medium to high security padlock used for securing chain and catches where there is a risk of cropping attacks. IDEAL FOR:
SECURITY RATING
WEATHER RATING
Shutters
Gates
Product Code
Size
Garages
Shackle Gauge
Sheds
(mm)
(mm)
Security Rating
Keys
Qty
70
9
8
3
1
Packs DP70
185
CABINETS, SAFES, CABLES & CHAINS
SECURITY SOLUTIONS
KEY CABINET
KEY SAFE
Provides safe and easy storage of multiple keys. Steel body with 20 hooks and a changeable 3 digit combination dial. .
Convenient and secure storage of keys. Solid and reinforced aluminium door with concealed combination dial for improved weather resistance. Provides secure and convenient key storage for care workers, cleaners, tradesmen and access to holiday homes. .
Size
Product Code
(inch)
Dials
Hooks
Box Qty
Carton Qty
Product Code
3
20
1
20
KEYSAFE
Packs
Dials
Pack Qty
Box Qty
4
1
6
Packs
20KEYCAB
8
CABLE LOCK
SECURITY RATING
Protective vinyl coating to enhance corrosion resistance and scratch prevention. Four dial combination gives multiple locking options.
WEATHER RATING
IDEAL FOR:
Bicycles
Machinery
Product Code
Ladders
Size
Cable Gauge
(mm)
(mm)
Security Rating
Dials
Qty
1000
8
4
4
1
Packs CL1000
LOOPED CABLE
SECURITY CHAIN
A weather resistant, braided steel security cable for increased strength and flexibility. Ideal for securing gates, site machinery and ladders.
A hardened steel security chain with anti-crop square links, covered with an anti-scratch nylon protective sleeve.
SECURITY RATING
SECURITY RATING
WEATHER RATING
WEATHER RATING
IDEAL FOR:
IDEAL FOR:
Machinery
Gates
Ladders
Product Code
Size
Cable Gauge
(mm)
(mm)
Security Rating
Qty
1800 3000
10 15
6 7
1 1
Bicycles
Packs LC1800 LC3000
186
Machinery
Bicycles
Ladders
Product Code
Size
Chain Gauge
(mm)
(mm)
Security Rating
Qty
1000 1500 2000
8 8 8
8 8 8
1 1 1
Packs SC1000 SC1500 SC200
RATCHET STRAPS
SECURITY SOLUTIONS
STANDARD DUTY S HOOK RATCHET STRAPS
STANDARD DUTY J HOOK RATCHET STRAPS
Ideal for quickly securing light loads during transit or storage.
Ideal for quickly securing light loads during transit or storage.
Product Code
WxL (mm)
Working Load (kg)
25 x 5 25 x 5
250 250
Break Pack Strength (kg) Qty
Packs 5RS2S 5RS4S
Product Code
WxL (mm)
Working Load (kg)
25 x 5
350
Break Pack Strength (kg) Qty
Packs 500 500
2 4
5RS2J
700
2
COMMERCIAL DUTY J HOOK RATCHET STRAPS
HEAVY DUTY J HOOK RATCHET STRAPS
Ideal for quickly securing medium loads during transit or storage.
Ideal for quickly securing heavy loads during transit or storage.
Product Code
WxL (mm)
Working Load (kg)
35 x 6
1000
Break Pack Strength (kg) Qty
Packs 6RS2J
2000
2
Product Code
WxL (mm)
Working Load (kg)
50 x 10
2500
Break Pack Strength (kg) Qty
Packs 10RS2J
5000
2
187
TIE DOWNS & BUNGEE CORDS
SECURITY SOLUTIONS
STANDARD DUTY CAM BUCKLE TIE DOWN
STANDARD DUTY BUNGEE CORDS
Ideal for quickly securing light loads during transit or storage.
Ideal for quickly securing light loads during transit or storage.
Product Code
WxL (mm)
Working Load (kg)
Break Pack Strength (kg) Qty
Packs
WxL (mm)
Working Load (kg)
Pack Qty
0.8 x 60 0.8 x 100
40 40
2 2
Packs
5CBTD2 36 x 5
123
245
2
60BUN 100BUN
MIXED BUNGEE CORDS 8 PACK
MIXED BUNGEE CORDS 20 PACK
Ideal for quickly securing a variety of loads during transit or storage.
Ideal for quickly securing a variety of loads during transit or storage.
Product Code
Ø (mm)
Length (mm)
Working Load (kg)
Qty
4.5 8.0 8.0
25 60 80
N/A 40 40
1 4 2 2
Packs BUNMIX8
188
Product Code
Product Code
Ø (mm)
Length (mm)
Working Load (kg)
Qty
4.5 8.0 8.0 8.0 8.0
25 45 50 60 75
N/A 40 40 40 40
1 4 4 4 4 4
Packs BUNMIX20
INDEX
A
ADAPTORS......................................................... ONE PIECE........................................................................ SDS 166 TWO PIECE....................................................................... ANGLE BRACKETS............................................ ARRIS RAIL BRACKETS.................................... AUGER BITS....................................................... HIGH PERFORMANCE...............................................
166 166 166 102 106 118 119
B
BLACKJAX............................................................. 18 BLACKSMITHS DRILLS.................................... 124 BONDED ABRASIVE DISC.............................. 143 BRAD POINT WOOD BITS.............................. 117 BRICK REINFORCEMENT COIL..................................................................... 104 BROACHING CUTTERS................................... 125 BUNGEE CORDS............................................... 188
C
C2.............................................................................. 9 C2 CLASSIC............................................................................ 9 C2 DECKING....................................................................... 21 C2 EXTERIOR...................................................................... 11 C2 FLOORING.................................................................... 10 C2 TONGUE FIX................................................................ 11 C2 TRADE CASE................................................................ 10 CABLE LOCK...................................................... 186 CABLE TIES............................................................ 60 CABLE TRAY BOLTS............................................. 50 CAM BUCKLE TIE DOWN................................ 188 CARCASS SCREWS.............................................. 19 CARRIAGE BOLT.................................................. 48 CEILING ANCHORS............................................. 70 CHEMICAL ANCHOR STUDS............................ 78 CHUCKS..................................................... 131, 132 CIRCULAR SAW BLADES....................... 155, 156 CLASSIC................................................................. 12 COACH SCREWS.................................................. 24 COLLATED SCREWS............................................ 28 CLASSIC STAINLESS....................................................... 28 COARSE THREAD............................................................. 28 FINE THREAD..................................................................... 28 FLOORING SCREW......................................................... 28 SELF-DRILL.......................................................................... 28 SELF-DRILLING WING TIP.......................................... 28 CONE CUTTERS................................................ 126 CONNECTORS & BRACES............................... 107 ANGLE BRACES............................................................. 108 CORNER BRACES.......................................................... 107 CORNER PLATES........................................................... 108 MENDING PLATES....................................................... 108 MIRROR PLATES............................................................ 108 STRETCHER PLATES.................................................... 107 TEE PLATES....................................................................... 108 TIMBER CONNECTORS............................................. 108 CORRUGATED SHEET FIXINGS........................ 35 COUNTERSINKS................................................ 126 3 FLUTE............................................................................... 126 DE-BURRING................................................................... 126 CRAMPS.............................................................. 104
D
DECKING SCREW................................................ 21 C2 DECKING SCREW..................................................... 21 CLASSIC DECKING SCREW....................................... 21
SOLO DECKING SCREW.............................................. 21 DIAMOND BLADES.......................................... 141 CERAMIC BLADES........................................................ 142 CUP GRINDING WHEEL............................................ 143 MORTAR RAKING BLADES...................................... 142 MULTI-PURPOSE........................................................... 141 CHIMAERA............................................................... 141 LASER WELDED BLADE................................... 141 PREMIUM LASER WELDED BLADE........... 141 SINTERED BLADE................................................ 141 DIAMOND DRILL BITS.................................... 116 DOOR ACCESSORIES....................................... 179 ADJUSTABLE ROLLER CATCHES......................... 179 BALES CATCHES............................................................ 179 DOUBLE BALL CATCHES......................................... 180 DOUBLE ROLLER CATCHES................................... 180 KNOCK DOWN BLOCKS........................................... 180 MAGNETIC CATCHES................................................. 180 MODESTY BLOCKS...................................................... 180 PVC DOOR STOPS....................................................... 181 PVC DOOR WEDGES.................................................. 181 SPRING DOOR STOPS............................................... 181 TUBULAR LATCHES..................................................... 179 DOWTY TYPE WASHER...................................... 35 DRILL SETS................................................ 133, 134 DRIVER BITS S2 ........................................................................................163 SETS .............................................................................164, 165 V5 IMPACT........................................................................ 162 DRIVER BIT SETS.............................................. 165 DROP IN ANCHORS............................................ 75 DRY DIAMOND CORE BITS............................ 139 ACCESSORIES................................................................. 140 DRYWALL BRACKETS...................................... 107 DRYWALL SCREWS...................................... 26, 27 COARSE THREAD............................................................. 26 DENSE BOARD.................................................................. 27 FINE THREAD..................................................................... 26 REVERSE THREAD............................................................ 27 SELF-DRILL.......................................................................... 27 SHARP POINT.................................................................... 27 DUST SHEETS.................................................... 177
E
EPDM WASHERS.................................................. EXPRESS NAILS.................................................... EYES........................................................................ SCREW EYES....................................................................... VINE EYES.............................................................................
34 69 61 61 61
F
FENCING CLIPS................................................. 106 FILE CLEANING BRUSH.................................. 171 FIXING BANDS.................................................. 104 FLAT WOOD BITS............................................. 117 FORGED EYES...................................................... 77 FORGED HOOKS.................................................. 77
H
HACKSAWS........................................................ 169 HACKSAW BLADES..................................................... 170 JUNIOR................................................................................ 169 JUNIOR HACKSAW BLADES.................................. 170 LARGE.................................................................................. 169 LIGHTWEIGHT................................................................ 169 MINI 169 HAMMER-IN FIXINGS........................................ 66 HEX HEAD COVER CAPS................................... 34
HIGH TENSILE THREADED BAR....................... 51 HINGE CUTTERS............................................... 117 HINGED COVER CAPS........................................ 19 HOLESAWS........................................................ 136 HOLESAW KITS.............................................................. 138 HOOKS................................................................... 61 PICTURE HOOK SET....................................................... 61 ROUND CUP HOOKS.................................................... 61 SCREW HOOKS................................................................. 61 SQUARE CUP HOOKS................................................... 61
I
IN-DEX.................................................................... 22 INSULATION RETAINING CLIPS.................... 105 INTERLOCKING WEDGES............................... 109
J
JIGSAW BLADES............................................... 144 METAL HIGH CARBON STEEL BLADES................... 148 PREMIUM BI-METAL BLADES...................... 150 WOOD HIGH CARBON STEEL BLADES................... 144 PREMIUM BI-METAL BLADES...................... 147 JOBBER DRILLS................................................. 120 COBALT............................................................................... 120 M2 FULLY GROUND......................................... 121, 123 ROLL FORGED................................................................ 122
K
KEY CABINET..................................................... 186 KEY SAFE............................................................ 186 KNIFE BLADES.................................................. 168
L
LOOPED CABLE................................................ 186
M
MACHINE SCREWS............................................. 38 COUNTERSUNK................................................................ 38 PAN HEAD............................................................................ 38 MASONRY DRILL BITS.................................... 115 MASONRY HANGERS......................................... 97 METAL CAVITY ANCHORS................................ 67 METAL CONSTRUCTION SCREWS.................. 30 COMPOSITE PANEL........................................................ 32 CORRUGATED SHEET FIXINGS............................... 35 DOWTY TYPE WASHER............................................... 35 EPDM WASHERS.............................................................. 34 HEX HEAD COVER CAPS............................................ 34 SELA COVER AND WASHER...................................... 35 SELF-DRILLING SCREWS............................................ 30 FOR HEAVY SECTION STEEL........................... 31 FOR LIGHT SECTION STEEL............................. 30 SLASH POINT..................................................................... 32 STITCHING SCREWS...................................................... 31 WING TIP............................................................................... 33 METAL FRAMING SCREWS............................... 36 PANCAKE HEAD............................................................... 36 PAN HEAD............................................................................ 36 WAFER HEAD..................................................................... 36 METAL INSULATION DISC................................ 71 METAL INSULATION FIXINGS.......................... 71 PLASTIC COVER CAP.................................................... 71 MINI TIMBER HANGERS.................................... 98
189
INDEX
MIRROR PLATES............................................... 108 MIRROR SCREWS................................................ 19 MIXED SCREW PACKS........................................ 20 MIXED SCREW TRAYS........................................ 20 MULTI-FIX BOLT.................................................. 74 MULTI-FIX RESIN................................................. 79 MULTI-FIX SCREWS............................................ 73 CONCRETE SCREW........................................................ 73 MASONRY SCREW.......................................................... 73 MULTI-FUNCTIONAL HANGERS..................... 98 MULTI-PURPOSE DRILL BITS........................ 115 MULTI-TOOL BLADES..................................... 157 BI-METAL........................................................................... 157 CARBON STEEL.............................................................. 158 TITANIUM.......................................................................... 157
N
NAIL IN ANCHORS.............................................. 70 NAIL PLATES...................................................... 103 NAILS...................................................................... 83 ALUMINIUM....................................................................... 93 BRIGHT................................................................................... 86 COPPER................................................................................. 93 COPPER DISC RIVETS........................................... 94 COPPER STRAPS..................................................... 94 FIRMAHOLD............................................................... 83, 84 BRAD 84 CLIPPED........................................................................ 83 FUEL CELLS......................................................................... 85 GALVANISED...................................................................... 89 MASONRY............................................................................ 94 POLYMER HEADED........................................................ 85 SHERARDISED................................................................... 92 STAINLESS STEEL............................................................. 95 NUTS....................................................................... 53 HEX CONNECTOR NUT............................................... 55 HEX DOME NUT............................................................... 54 HEX FULL.............................................................................. 53 HEX SERRATED FLANGE............................................. 54 NYLON INSERT NUTS (TYPE P)............................... 53 NYLON INSERT NUTS (TYPE T)............................... 54 WING NUT........................................................................... 55 NYLON FIXINGS................................................... 72 FRAME ANCHORS.......................................................... 72 FRAME FIXINGS................................................................ 72 HAMMER FIXINGS.......................................................... 72 NYLON PLUGS...................................................... 24
P
PACKERS............................................................. 109 PADLOCKS......................................................... 183 ARMOURED..................................................................... 185 BRASS.................................................................................. 184 BRASS RECTANGULAR.............................................. 184 COMBINATION............................................................... 183 DISC 185 LAMINATED..................................................................... 183 STAINLESS STEEL.......................................................... 185 WEATHERPROOF.......................................................... 183 PIPE CLIPS............................................................. 64 PLASTIC INSULATION FIXINGS....................... 71 PLASTIC PLUGS................................................... 69 PREMIUM BI-METAL BLADES....................... 147 PROTECTIVE FILMS................................ 176, 177
R
RATCHET STRAPS............................................. 187 REBAR CUTTERS............................................... 113
190
RECIPROCATING SAW BLADES.................... 151 HIGH CARBON STEEL................................................ 151 METAL BI - METAL................................................................ 153 WOOD BI - METAL................................................................ 152 RESIN...................................................................... 79 RESIN ACCESSORIES.......................................... 81 BLOW-OUT PUMP.......................................................... 81 HOLE CLEANING BRUSHES...................................... 81 INTERNALLY THREADED SOCKETS..................... 81 MIXING NOZZLES........................................................... 81 PLASTIC SLEEVES............................................................ 81 RESIN GUNS......................................................... 80 RESTRAINT STRAPS......................................... 100 HEAVY.................................................................................. 100 LIGHT................................................................................... 101 ROOFING BOLT.................................................... 50
S
SANDING PAD................................................... 160 SANITARY FIXINGS............................................. 62 SCRATCH BRUSHES......................................... 171 PLASTIC HANDLE........................................................ 171 WOODEN HANDLE..................................................... 171 SCREW CAPS........................................................ 19 SCREW CUPS........................................................ 19 SCREW-IN FRAME TIE..................................... 105 SDS MAX HAMMER BITS................................ 114 SDS MAX STEELS............................................. 114 SDS PLUS HAMMER BITS............................... 111 SDS PLUS STEELS............................................. 112 SECURITY CHAIN............................................. 186 SELA........................................................................ 35 SELF-TAPPING SCREWS............................. 37, 39 COUNTERSUNK................................................................ 37 FLANGE HEAD.................................................................. 37 PAN HEAD............................................................................ 37 SETS................................................................. 51, 52 SHIELD DUST SHEETS................................................................. 177 PROTECTIVE FILMS........................................... 176, 177 WIPES................................................................................... 176 SHIELD ANCHORS.............................................. 76 SHIMS.................................................................. 109 SOCKET DRIVERS............................................. 166 SOCKET SCREWS................................................. 39 SOLO WOODSCREWS........................................ 15 SOLO DECKING SCREW.............................................. 21 SPEED PLUGS....................................................... 67 SPRING TOGGLES............................................... 66 STEP DRILLS...................................................... 126 STUB DRILLS..................................................... 124
T
TAPE ALUMINIUM FOIL TAPE............................................ 174 ANTI-SLIP TAPE.............................................................. 175 BARRIER TAPE................................................................. 175 CLOTH TAPE..................................................................... 173 HAZARD TAPE................................................................ 175 HIGH STRENGTH PVC BUILDERS TAPE.......... 173 MASKING TAPE.............................................................. 174 PACKAGING TAPE......................................................... 174 PVC INSULATION TAPE............................................. 174 TAPE MEASURE................................................. 170 TCT TILE & GLASS BITS................................... 116 THREADED BAR............................................ 51, 78 THROUGHBOLTS................................................. 75 TIMBER CONNECTORS................................... 108
TIMBER HANGERS.............................................. 99 TIMBER SCREWS................................................. 22 HEAVY DUTY...................................................................... 23 IN-DEX.................................................................................... 22 TRUSS CLIPS...................................................... 102 TWIN-THREADED WOODSCREWS................. 17
U
UNIVERSAL FRAMING ANCHOR.................. 103 UTILITY KNIFE BLADES.................................. 168
V
VELOCITY................................................................ 8 VERTICAL FLANGE CLIP.................................... 69
W
WALL STARTER KITS........................................ 106 WALL TIES.......................................................... 105 WASHERS.............................................................. 55 FORM A................................................................................. 55 FORM B.................................................................................. 56 FORM C................................................................................. 56 PENNY/REPAIR.................................................................. 57 SPRING................................................................................... 56 SQUARE PLATE................................................................. 56 WINDOW BOARD TIES.................................... 105 WINDOW FABRICATION SCREWS... 42, 44, 45, 46 BAYPOLE SCREWS.......................................................... 44 CILL SCREWS..................................................................... 44 ELEMENT SCREWS......................................................... 44 FOR REINFORCED FRAMES.............................. 45, 46 FOR UNREINFORCED FRAMES....................... 42, 43 MACHINE SCREWS......................................................... 44 REINFORCED FRAME SCREWS............................... 44 WEATHER BAR SCREWS.............................................. 44 WIPES.................................................................. 176 WIRE BRUSHES...................... 127, 128, 129, 130 NYLON................................................................................ 128 WIRE HAND BRUSHES.................................... 171 WIRE HANGERS................................................... 70 WORKTOP CONNECTOR................................ 107
NOTES
191
NOTES
192
ISSUE NO: 3 Cover 3.indd 1
SUPPLIER OF SCREWS, FIXINGS, FASTENERS, POWERTOOL ACCESSORIES AND BUILDERS HARDWARE
SUPPLIED BY:
SU PPL I E R OF
SCREWS, FIXINGS, FASTENERS, POWER TOOL ACCESSORIES & BUILDERS HARDWARE
2016/17 22/09/2016 11:29:38