SUPPLIER OF
F I X I N G S , FA S T E N E R S POWER TOOL ACCESSORIES & B U I L D E R S H A R D WA R E
CONTENTS
TIMBER CONSTRUCTION SCREWS
07 - 24
DRYLINING CONSTRUCTION SCREWS
25 - 28
METAL CONSTRUCTION SCREWS
29 - 38
WINDOW FABRICATION SCREWS
39 - 44
NUTS, BOLTS, SETS AND WASHERS
45 - 52
FIXINGS AND FASTENERS 53 - 56 PLASTERBOARD FIXINGS 57 - 59 CONCRETE AND MASONRY FIXINGS
60 - 73
COLLATED AND LOOSE NAILS 74 - 86 BUILDERS METAL WORK 87 - 100 DRILLING 101 - 118 CUTTING 119 - 134 DRIVER BITS 135 - 138 ADHESIVE TAPES AND PROTECTIVE FILMS
139 - 142
IRONMONGERY 143 - 146 LOCKS AND SECURITY SOLUTIONS
147 - 150 1
CONTENTS
RECESS STYLES POZI / CROSS RECESS
TIM DRIVE RECESS
Standard recess for woodscrews, chipboard screws etc.
High performance recess on TIMco Multi-Fix and Velocity screws.
PHILLIPS RECESS
SQUARE RECESS / ROBERTSON DRIVE
Standard recess for self-drilling, drywall and window screws.
Recess on square drive pan self-drilling screws.
COMBI RECESS A combination of a traditional slotted recess with a more common pozi recess.
HEAD TYPES COUNTERSUNK HEAD
BUGLE HEAD
Designed for countersinking into timber for a flush or recessed finish. May have ribs to assist countersinking.
A curved surface under the head to prevent damage or tearing to the plasterboard paper.
DOUBLE COUNTERSUNK
PAN / ROUND HEAD
Improved design on the countersunk head to give additional head strength and assist countersinking.
Head with a flat underside. Designed for application fixing against metal surfaces.
DOUBLE COUNTERSUNK WITH RIBS
WAFER / FLANGE HEAD
Ribs under head to assist with countersinking.
SHALLOW PAN COUNTERSUNK A special head design to assist with clamping and countersinking.
2
Low profile head with a flat underside for applications where a large clamping area and an unobtrusive head is required.
HEXAGON HEAD Positive drive Hex Head with an integral washer to increase clamping effectiveness.
CONTENTS
THREAD TYPES COARSE THREAD (up to 16 TPI)
TWIN THREAD
Also know as spaced threads, they are normally used for all timber applications.
Also known as twin lead threads, they are designed to give a fast insertion time in soft material.
FINE THREAD (over 16 TPI)
HI-LO THREAD
Also known as metric threads, they are only used in steel applications. Fine threads are for use with thicker steels. (5 - 12mm thickness).
Used in soft timbers, plastics and into thin sheet sections. Hi-Lo threads have superior holding power compared to a low TPI coarse thread in these types of material.
SELF TAPPING THREAD A common thread design mainly used in steel applications. (1-5mm)
POINT STYLES NEEDLE / GIMLET AND SUPER SHARP POINT (SS) Designed for piercing timber, MDF, plastic and light gauge metal up to 0.6mm without pre-drilling.
SELF DRILL POINT For drilling into metals without the need for pre-drilling.
AB POINT
C2 SLASH
For use in pre-drilled sheet material applications.
Twin cut for rapid "pick up" and reduced splitting.
B POINT
TYPE 17 POINT
For use in pre-drilled shallow holes.
Also known as slash point, they are used for fixing timber without the need to pre-drill. The cutting edge helps reduces splitting of the timber.
3
CONTENTS
GAUGE
MEASURING LENGTH
The gauge of the screw is determined by the size of the outside thread diameter.
Fasteners with the following head types are measured from the underside of the head to the point of the screw:
Gauge 0g 1g 2g 3g 4g 5g 6g 7g 8g 9g 10g 12g 13g 14g 15g 16g 18g 20g 24g
Metric (mm)
1.5 1.9 2.25 2.5 3.0 3.3 3.5 3.9 4.2 4.5 4.8 5.5 6.1 6.3 6.5 6.8 7.5 8.1 9.4
THREAD LENGTH
PAN / ROUND
WAFER / FLANGE
HEXAGON
Fasteners with the following head types are measured from the top of the countersunk to the point of the screw:
COUNTERSUNK
DOUBLE CS
BUGLE
RAISED HEAD
DCS WITH RIBS
TPI - THREADS PER INCH The TPI is the number of thread crests that can be counted within 1� (25.4mm)
TPI
Drill Tip
4
CONTENTS
METRIC/IMPERIAL SIZE COMPARISON CHART Listed beside the common imperial sizes are the metric equivalents. Also listed are common ‘even’ approximate metric equivalents in brackets. Metric
Imperial (inch)
Metric
(mm)
(mm)
Imperial (inch)
1/64” 1/32” 3/64” 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32” 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2” 17/32” 35/64” 9/16” 37/64” 19/32” 39/64” 5/8” 41/64” 21/32” 43/64” 11/16” 45/64” 23/32” 47/64” 3/4” 49/64” 25/32” 51/64”
0.40 0.79 1.19 1.59 1.98 2.38 2.78 3.17 (3.0) 3.5 3.97 (4.0) 4.5 4.76 (5.0) 5.16 5.5 5.95 6.35 (6.0) 6.75 7.14 7.54 7.94 (8.0) 8.33 8.73 9.13 9.52 (10.0) 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70 (13.0) 13.49 13.89 14.29 (14.0) 14.68 15.08 15.48 15.88 (16.0) 16.27 16.67 17.06 17.46 17.86 18.26 18.65 19.05 (19.0) 19.45 19.84 20.24
13/16” 53/64” 27/32” 55/64” 7/8” 57/64” 29/32” 59/64” 15/16” 61/64” 31/32” 63/64” 1” 1-1/16” 1-3/32” 1-1/8” 1-5/32” 1-3/16” 1-7/32” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3” 3-1/4” 3-1/2” 3-3/4” 4” 4-1/2” 5” 5-1/2” 6” 6-1/2” 7” 7-1/2” 8” 8-1/2” 9” 9-1/2” 10” 11” 12” 13” 14” 15” 16” 18”
20.64 21.03 21.43 21.83 22.23 (22.0) 22.62 23.02 23.42 23.81 24.21 24.61 25.00 25.40 (25.0) 26.99 27.78 28.58 (28.0) 29.37 30.16 (30.0) 30.96 31.75 (32.0) 38.10 (38.0) 45.45 (45.0) 50.80 (50.0) 57.15 (57.0) 63.50 (65.0) 69.85 (70.0) 76.20 (75.0) 82.55 (82.0) 88.90 (90.0) 95.25 (95.0) 101.60 (100) 114.30 (115) 127.00 (125) 139.70 (140) 152.40(150) 165.10 (165) 177.80 (175) 190.50 (190) 203.20 (200) 215.90 (215) 228.60 (230) 241.30 (240) 254.00 (250/255) 279.40 (280) 304.80 (305) 330.20 (330) 335.60 (350/355) 381.00 (380) 406.40 (400/405) 457.20 (455/460)
5
CONTENTS
PLATING GUIDE Yellow - Zinc electrolytic plating and yellow passivated after treatment for enhanced corrosion. Zinc (CR3)
- A bright Zinc electrolytic plating with a clear toxin free finish. Complies with restrictions of hazardous substances in electrical/electronic equipment (ROHS) directive (2002/95/EC).
Zinc (CR6) plating.
- A bright zinc electrolytic
Black Pass. - A zinc electrolytic plating with a black passivation after treatment to enhance corrosion resistance. Black Phos. - An immersed black phosphate plating for corrosion resistance and lubrication. Nickel
- An electroplated, high lustre, corrosion resistant finish.
Exterior - A superior organic finish which is environmentally friendly and offers and excellent resistance to corrosion in outdoor applications.
bonded plating.
Nano - Plated with TIMco nano technology, giving increased corrosion resistance.
Galv. - An post-manufacturing electro-galvanic plating applied to the product.
A2/Aust. SS - A non-magnetic austenitic steel suitable for many day to day external or corrosive applications offering an excellent resistance to corrosion.
Pre-Galv. - An pre-manufacturing electro-galvanic plating applied to the product.
A4 SS
- Very similar to the A2 SS but more suitable for extremely corrosive applications, including marine environments.
Martensitic SS - A magnetic, martensitic stainless steel with moderate heat resistance, with silver ruspert plating.
Bright
- Polished only.
Sherardised
FirmaGalv plating.
- A dry galvanised, zinc
- An electro-galvanic
FirmaGalv+ - Similar to the electrogalvanic plating on FirmaGalv. This plating provides better corrosion resistance. Hot Dipped - A galvanised zinc plating which gives excellent corrosion resistance.
APPLICATION GUIDE
6
HARDWOOD
SOFTWOOD
CHIPBOARD
MDF
WOOD PANEL
PLASTIC
PLASTERBOARD
BRICK
CONCRETE
STONE
HOLLOW BLOCK
BLOCK
REINFORCED CONCRETE
HARD CONCRETE
CONCRETE (15-30)
KERBS/SLABS
CONCRETE PAVIORS
VITRIFIED CLAY PRODUCTS
SOFT CLAY
ENGINEERING BRICK
MEDIUM FACING BRICKS
SOFT FACING BRICK
CLAY PAVIORS
HARD SANDSTONE
SANDSTONE
CONCRETE ROOFING TILES
HARD SLATE
CLAY ROOF TILES
CERAMIC TILE
GLASS
MARBLE
PORCELAIN
DAMP/WET HOLES
UNDERWATER
LOW VENTILATION
HEAVY DUTY FIXING
REBAR
STEEL
ALUMINIUM
NONFERROUS METAL
STAINLESS STEEL
CAST IRON
THIN SHEET METAL
TIMBER CONSTRUCTION SCREWS
08 - VELOCITY 09 - C2 CLASSIC 10 - C2 FLOORING 11 - C2 EXTERIOR 11 - C2 TONGUE-FIX 12 - CLASSIC
15 - SOLO 17 - TWIN-THREADED 18 - BLACKJAX 19 - MIRROR SCREWS 19 - CARCASS SCREWS 19 - SCREW CAPS
20 - MIXED TRAYS 21 - IN-DEX DECKING 22 - IN-DEX TIMBER 23 - COACH SCREWS 23 - CARRIAGE BOLTS 24 - NYLON PLUGS
7
VELOCITY MULTI-PURPOSE SCREWS
TIMBER CONSTRUCTION SCREWS
VELOCITY®
Materials
Premium multi-use screw Available in:
Yellow
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials whilst achieving exceptional pull out resistance. Designed to give the user a consistent and reliable product that can be used in a variety of applications.
VELOCITY
Double Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 16 3.0 x 20 3.0 x 30 3.0 x 35 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 16 4.5 x 20 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 55 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 45 6.0 x 50
4 x 5/8 4 x 3/4 4 x 11/4 4 x 13/8 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8 x 21/2 8 x 23/4 8x3 9 x 5/8 9 x 3/4 9 x 11/4 9 x 11/2 9x2 9 x 23/8 9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 13/4 12 x 2
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200
Boxes 30016VY 30020VY 30030VY 30035VY 30040VY 35012VY 35016VY 35020VY 35025VY 35030VY 35035VY 35040VY 35045VY 35050VY 40012VY 40016VY 40020VY 40025VY 40030VY 40035VY 40040VY 40045VY 40060VY 40070VY 40080VY 45016VY 45020VY 45030VY 45040VY 45050VY 45055VY 45060VY 45070VY 45080VY 50030VY 50040VY 50045VY 50050VY 50060VY 50070VY 50075VY 50080VY 50090VY 50100VY 60040VY 60045VY 60050VY
8
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
60060VY 60070VY 60080VY 60090VY 60100VY 60120VY 60130VY 60150VY 60180VY 60200VY
6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200
12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 5 12 x 6 12 x 71/4 12 x 8
200 200 200 100 100 100 100 100 100 100
3.5 x 16 3.5 x 25 3.5 x 30 4.0 x25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 80
6 x 5/8 6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 3
150 100 180 130 140 100 80 55 65
Trade Case
VTRADE
VELOCITY
Double Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
10 x 2 10 x 2½ 10 x 2¾ 10 x 3 10 x 4 12 x 3 12 x 4 12 x 4¾ 12 x 6 12 x 7¼ 12 x 8 16 x 8 16 x 9 16 x 10 16 x 107/8 16 x 12
200 200 200 200 100 200 100 100 100 100 100 50 50 50 25 25
Boxes (Driver bit included) 50050VYTX 50060VYTX 50070VYTX 50080VYTX 50100VYTX 60080VYTX 60100VYTX 60120VYTX 60150VYTX 60180VYTX 60200VYTX 80200VYTX 80225VYTX 80250VYTX 80275VYTX 80300VYTX
5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 100 6.0 x 120 6.0 x 150 6.0 x 180 6.0 x 200 8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300
C2 CLASSIC MULTI-PURPOSE SCREWS
TIMBER CONSTRUCTION SCREWS
C2® CLASSIC
Materials
Multi-purpose screw Available in: Yellow
Zinc (CR3)
The C2 Classic has been re-engineered around the backbone of the Classic, one of Europe’s largest selling multi-purpose screws. Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw.
C2 CLASSIC -
Yellow
Double Countersunk with Ribs Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 11/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
2,000 1,800 1,700 1,500 1,200 800 800 600 400 375 350 300
Tubs (V5 bit included) 35025C2TUB 35030C2TUB 40025C2TUB 40030C2TUB 40040C2TUB 40050C2TUB 50040C2TUB 50050C2TUB 50060C2TUB 50070C2TUB 50080C2TUB 500100C2TUB
3.5 x 25 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
60070C2 60080C2 60090C2 60100C2 60120C2 60130C2 60150C2 60180C2 60200C2
6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200
12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8
200 200 100 100 100 100 100 100 100
C2 CLASSIC -
Boxes 35020C2 35025C2 35030C2 35040C2 35050C2 40025C2 40030C2 40035C2 40040C2 40045C2 40050C2 40060C2 40070C2 40080C2 45030C2 45040C2 45050C2 45060C2 45070C2 45080C2 50030C2 50040C2 50045C2 50050C2 50060C2 50070C2 50075C2 50080C2 50090C2 50100C2 50120C2 60050C2 60060C2
3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 50 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 50 6.0 x 60
6 x 3/4 6x1 6 x 11/4 6 x 11/2 6x2 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/4 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 10 x 43/4 12 x 2 12 x 21/2
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 200 200
Zinc (CR3)
Double Countersunk with Ribs
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
1,500 1,200 800 600 400 375 350 300
Tubs (V5 bit included) 40030C2ZTUB 4.0 x 30 40040C2ZTUB 4.0 x 40 40050C2ZTUB 4.0 x 50 50050C2ZTUB 5.0 x 50 50060C2ZTUB 5.0 x 60 50070C2ZTUB 5.0 x 70 50080C2ZTUB 5.0 x 80 500100C2ZTUB 5.0 x 100
9
C2 TRADE CASE & C2 FLOORING SCREW
TIMBER CONSTRUCTION SCREWS
C2速 TRADE CASE
Materials
Multi-purpose screw Available in: Yellow
A strong metal case containing nine of the most popular C2 Screws and five V5 impact driver bits.
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Trade Case
C2SC
C2速 FLOORING & MDF
3.5 x 16 6 x 5/8 3.5 x 25 6x1 4.0 x 30 8 x 11/4 4.0 x 40 8 x 11/2 4.0 x 50 8x2 5.0 x 60 10 x 21/2 5.0 x 70 10 x 23/4 5.0 x 80 10 x 3 5.0 x 100 10 x 4 V5 Impact Driver Bits
480 350 250 350 100 65 55 100 45 5
Materials
Twin cut flooring screw Available in: Yellow
To BS
EN ISO
14592:2
008
Designed for use in man made boards such as MDF and chipboard. The C2 twin-cuts ensure a rapid pickup and reduces the likelihood of splitting whilst the steep head design with self countersinking ribs ensures a flush finish. The plain shank enables the screw to pull the two substrates together with out the need to manually clamp.
C2 FLOORING & MDF SCREW Double Countersunk with Ribs Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Tubs (T20 driver bit included) 42055C2MDF
10
4.2 x 55
8 x 21/4
250
C2 EXTERIOR & C2 TONGUE FIX
C2速 EXTERIOR
TIMBER CONSTRUCTION SCREWS Materials
Twin cut exterior screw Available in:
Exterior
To BS
EN ISO
14592:2
008
The C2 Exterior screw has been plated with a multi-layer protection system that consists of an organic top coat barrier and a zinc base layer. Designed to provide excellent additional protection against corrosion in exterior applications.
C2 EXTERIOR SCREW
Double Countersunk with Ribs Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Tubs (V5 impact bit included) 40030C2S 40040C2S 40050C2S 40060C2S 40070C2S 50050C2S 50060C2S 50070C2S 50080C2S 50100C2S
4.0 X 30 4.0 X 40 4.0 X 50 4.0 X 60 4.0 X 70 5.0 X 50 5.0 X 60 5.0 X 70 5.0 X 80 5.0 X 100
8 x 11/4 8 x 11/2 8x2 8 x 21/2 8 x 23/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
400 350 300 200 170 180 150 120 110 80
C2速 TONGUE-FIX
Materials
Twin cut flooring screw Available in: Yellow
To BS
EN ISO
14592:2
008
Specifically designed for attaching tongue and groove floorboards to flooring joists. The C2 Tongue-Fix gives a secure hidden fixture through the tongue without causing damage, allowing a flush fit with the next board.
C2 TONGUE-FIX SCREW Reduced Head Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
Tubs (T10 driver bit included) 35045C2TG
3.5 x 45
6 x 13/4
350
11
CLASSIC MULTI-PURPOSE SCREWS
TIMBER CONSTRUCTION SCREWS
CLASSIC
Materials
Single cut multi-purpose screw Available in: Yellow
Zinc (CR3)
Nickel
Black Pass.
A2/Aust. SS
Specifically designed as a multi-purpose product, the 25째 sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.
CLASSIC -
Yellow
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.0 x 30 3.0 x 35 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60
4 x 1/2 4 x 5/8 4 x 3/4 4x1 4 x 11/4 4 x 13/8 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Boxes 30012CLAF 30016CLAF 30020CLAF 30025CLAF 30030CLAF 30035CLAF 30040CLAF 35012CLAF 35016CLAF 35020CLAF 35025CLAF 35030CLAF 35035CLAF 35040CLAF 35045CLAF 35050CLAF 40012CLAF 40016CLAF 40020CLAF 40025CLAF 40030CLAF 40035CLAF 40040CLAF 40045CLAF 40050CLAF 40055CLAF 40060CLAF
12
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
40070CLAF 40080CLAF 45016CLAF 45020CLAF 45025CLAF 45030CLAF 45035CLAF 45040CLAF 45045CLAF 45050CLAF 45055CLAF 45060CLAF 45070CLAF 45080CLAF 50020CLAF 50025CLAF 50030CLAF 50035CLAF 50040CLAF 50045CLAF 50050CLAF 50055CLAF 50060CLAF 50070CLAF 50075CLAF 50080CLAF 50090CLAF 50100CLAF 50120CLAF 60040CLAF 60045CLAF 60050CLAF 60060CLAF 60070CLAF 60080CLAF 60090CLAF 60100CLAF 60120CLAF 60130CLAF 60150CLAF 60180CLAF 60200CLAF
4.0 x 70 4.0 x 80 4.5 x 16 4.5 x 20 4.5 x 25 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45 4.5 x 50 4.5 x 55 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 40 6.0 x 45 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200
8 x 23/4 8x3 9 x 5/8 9 x 3/4 9x1 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4 9x2 9 x 23/8 9 x 21/2 9 x 23/4 9x3 10 x 3/4 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 23/8 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 10 x 43/4 12 x 11/2 12 x 13/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 200 200 200 200 200 200 100 100 100 100 100 100 100
CLASSIC MULTI-PURPOSE SCREWS CLASSIC PAN HEAD -
TIMBER CONSTRUCTION SCREWS
CLASSIC -
Yellow
Pan Head
Zinc (CR3)
Double Countersunk
The Classic multi-purpose screw with pan head for extra clamping.
The Classic multi-purpose screw plated in zinc.
Product Code
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 5.0 x 30 5.0 x 50
6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8x2 10 x 11/4 10 x 2
200 200 200 200 200 200 200 200 200 200 200 200 200
Boxes
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 70 4.5 x 25 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 70 6.0 x 80 6.0 x 100
4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2 8 x 23/4 9 x 5/8 9 x 11/4 9 x 11/2 9x2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 13/8 10 x 1 1/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 23/4 12 x 3 12 x 4
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 100
Boxes
35012CLAP 35016CLAP 35020CLAP 35025CLAP 40016CLAP 40020CLAP 40025CLAP 40030CLAP 40035CLAP 40040CLAP 40050CLAP 50030CLAP 50050CLAP
CLASSIC HINGE SCREW -
Yellow
Nickel
Classic multi-purpose screw with a reduced 5mm head for specific use in continuous/piano hinges.
CLASSIC HINGE SCREW -
Yellow
5mm Reduced Head
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25
4 x 1/2 4 x 5/8 4 x 3/4 4x1
200 200 200 200
Boxes 30012CLAH 30016CLAH 30020CLAH 30025CLAH
CLASSIC HINGE SCREW 5mm Reduced Head
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20
4 x 1/2 4 x 5/8 4 x 3/4
200 200 200
Nickel
30012CLAZ 30016CLAZ 30020CLAZ 30025CLAZ 35012CLAZ 35016CLAZ 35020CLAZ 35025CLAZ 35030CLAZ 35035CLAZ 35040CLAZ 35050CLAZ 40016CLAZ 40020CLAZ 40025CLAZ 40030CLAZ 40035CLAZ 40040CLAZ 40045CLAZ 40050CLAZ 40055CLAZ 40060CLAZ 40070CLAZ 45025CLAZ 45030CLAZ 45040CLAZ 45050CLAZ 45070CLAZ 45080CLAZ 50025CLAZ 50030CLAZ 50035CLAZ 50040CLAZ 50050CLAZ 50060CLAZ 50070CLAZ 50080CLAZ 50090CLAZ 50100CLAZ 60040CLAZ 60050CLAZ 60070CLAZ 60080CLAZ 60100CLAZ
Boxes 30012CLAHN 30016CLAHN 30020CLAHN
13
CLASSIC MULTI-PURPOSE SCREWS
TIMBER CONSTRUCTION SCREWS
CLASSIC -
A2/Aust. SS
Product Code
Double Countersunk
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
30 25 20 15 14 10 8 7 6 4
Packs
The Classic multi-purpose screw plated in stainless steel for added corrosion resistance. Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 25 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 100 6.0 x 130 6.0 x 150
4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 3/8 6 x 1 1/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8 x 1 3/4 8x2 8 x 2 1/2 8 x 2 3/4 9 x 5/8 9 x 1 1/4 9 x 1 1/2 9x2 9 x 2 1/2 10 x 1 10 x 1 1/4 10 x 1 3/8 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 3 1/2 10 x 4 12 x 1 1/2 12 x 2 12 x 2 1/2 12 x 2 3/4 12 x 3 12 x 4 12 x 5 12 x 6
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100
Boxes 30012CLASS 30016CLASS 30020CLASS 30025CLASS 35012CLASS 35016CLASS 35020CLASS 35025CLASS 35030CLASS 35035CLASS 35040CLASS 35050CLASS 40016CLASS 40020CLASS 40025CLASS 40030CLASS 40035CLASS 40040CLASS 40045CLASS 40050CLASS 40060CLASS 40070CLASS 45025CLASS 45030CLASS 45040CLASS 45050CLASS 45060CLASS 50025CLASS 50030CLASS 50035CLASS 50040CLASS 50050CLASS 50060CLASS 50070CLASS 50080CLASS 50090CLASS 50100CLASS 60040CLASS 60050CLASS 60060CLASS 60070CLASS 60080CLASS 60100CLASS 60130CLASS 60150CLASS
14
35030CHSSP 40025CHSSP 40030CHSSP 40040CHSSP 40050CHSSP 50050CHSSP 50060CHSSP 50070CHSSP 50080CHSSP 50100CHSSP
CLASSIC -
Black Pass.
Double Countersunk
The Classic multi-purpose screw in black passivated. Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 16 3.5 x 25 4.0 x 25 4.0 x 30 4.0 x 40 4.5 x 30 5.0 x 30 5.0 x 40 5.0 x 80
6 x 5/8 6x1 8x1 8 x 11/4 8 x 11/2 9 x 11/4 10 x 11/4 10 x 11/2 10 x 3
200 200 200 200 200 200 200 200 100
Boxes 35016CLAB 35025CLAB 40025CLAB 40030CLAB 40040CLAB 45030CLAB 50030CLAB 50040CLAB 50080CLAB
SOLO WOODSCREWS
TIMBER CONSTRUCTION SCREWS
SOLO
Materials
Single threaded woodscrew Available in:
Yellow
Zinc (CR3)
To BS
EN ISO
14592:2
008
A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with a plastic plug.
SOLO -
Yellow
Double Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
1,250 1,000 800 525 400 375 325 250
3.0 x 12 3.0 x 15 3.0 x 17 3.0 x 20 3.0 x 25 3.0 x 30 3.5 x 12 3.5 x 15 3.5 x 17 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 17 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 20 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45 4.5 x 50 4.5 x 60
4 x 1/2 4 x 5/8 4 x 43/64 4 x 3/4 4x1 4 x 11/4 6 x 1/2 6 x 5/8 6 x 43/64 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 43/64 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 9 x 3/4 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4 9x2 9 x 21/2
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Tubs 40030STUBY 40040STUBY 40050STUBY 50050STUBY 50060STUBY 50070STUBY 50080STUBY 50100STUBY
Boxes 30012SOLOC 30015SOLOC 30017SOLOC 30020SOLOC 30025SOLOC 30030SOLOC 35012SOLOC 35015SOLOC 35017SOLOC 35020SOLOC 35025SOLOC 35030SOLOC 35035SOLOC 35040SOLOC 35050SOLOC 40015SOLOC 40017SOLOC 40020SOLOC 40025SOLOC 40030SOLOC 40035SOLOC 40040SOLOC 40045SOLOC 40050SOLOC 40060SOLOC 40070SOLOC 45020SOLOC 45030SOLOC 45035SOLOC 45040SOLOC 45045SOLOC 45050SOLOC 45060SOLOC
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
45070SOLOC 45080SOLOC 50025SOLOC 50030SOLOC 50035SOLOC 50040SOLOC 50045SOLOC 50050SOLOC 50060SOLOC 50070SOLOC 50075SOLOC 50080SOLOC 50090SOLOC 50100SOLOC 60040SOLOC 60050SOLOC 60060SOLOC 60070SOLOC 60080SOLOC 60090SOLOC 60100SOLOC 60120SOLOC 60130SOLOC 60150SOLOC
4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150
9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6
200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100 100 100
3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150
6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6
750 500 470 430 380 350 280 230 230 180 160 140 120 90 90 50 35
Bags 35015CHYB 35030CHYB 40025CHYB 40030CHYB 40035CHYB 40040CHYB 40050CHYB 40060CHYB 50040CHYB 50050CHYB 50060CHYB 50070CHYB 50080CHYB 50100CHYB 60080CHYB 60120CHYB 60150CHYB
15
SOLO WOODSCREWS
TIMBER CONSTRUCTION SCREWS
SOLO -
Yellow
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150
6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6
45 35 30 25 22 20 16 12 10 12 10 8 6 4 4 2 2
Packs 35015CHYP 35030CHYP 40025CHYP 40030CHYP 40035CHYP 40040CHYP 40050CHYP 40060CHYP 50040CHYP 50050CHYP 50060CHYP 50070CHYP 50080CHYP 50100CHYP 60080CHYP 60120CHYP 60150CHYP
SOLO -
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
40050SOLOZ 40060SOLOZ 40070SOLOZ 40080SOLOZ 45040SOLOZ 45050SOLOZ 45060SOLOZ 45070SOLOZ 45080SOLOZ 50025SOLOZ 50030SOLOZ 50040SOLOZ 50045SOLOZ 50050SOLOZ 50060SOLOZ 50070SOLOZ 50080SOLOZ 50090SOLOZ 50100SOLOZ 60050SOLOZ 60060SOLOZ 60080SOLOZ 60100SOLOZ 60120SOLOZ 60150SOLOZ
4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 50 6.0 x 60 6.0 x 80 6.0 x 100 6.0 x 120 6.0 x 150
8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 2 12 x 21/2 12 x 3 12 x 43/4 12 x 51/8 12 x 6
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 100 100 100
SOLO SQUARE RECESS -
Zinc
Double Countersunk
Zinc (CR3)
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Product Code Qty
Tubs 40030STUBZ 40040STUBZ 40050STUBZ 50050STUBZ 50060STUBZ 50070STUBZ 50080STUBZ 50100STUBZ
4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4
1,250 1,000 800 525 400 375 325 250
3.0 x 12 3.0 x 15 3.5 x 15 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45
4 x 1/2 4 x 5/8 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
16
Size (Imp. equiv.)
Qty
4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40 5.0 x 50 5.0 x 80
8 x 3/4 8x1 8 x 11/2 10 x 11/2 10 x 2 10 x 3
200 200 200 200 200 200
Boxes 40020SQSZ 40025SQSZ 40040SQSZ 50040SQSZ 50050SQSZ 50080SQSZ
SOLO SQUARE RECESS -
Boxes 30012SOLOZ 30015SOLOZ 35015SOLOZ 35020SOLOZ 35025SOLOZ 35030SOLOZ 35035SOLOZ 35040SOLOZ 35050SOLOZ 40015SOLOZ 40020SOLOZ 40025SOLOZ 40030SOLOZ 40035SOLOZ 40040SOLOZ 40045SOLOZ
Size (Metric)
Pan Head
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40
8 x 3/4 8x1 8 x 11/2 10 x 11/2
200 200 200 200
Boxes 40020SQPSZ 40025SQPSZ 40040SQPSZ 50040SQPSZ
Zinc
TWIN-THREADED WOODSCREWS
TIMBER CONSTRUCTION SCREWS
TWIN-THREADED
Materials
Woodscrew
Available in: Zinc (CR3) To BS
EN ISO
14592:2
008
A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.
TWIN-THREADED Double Countersunk Product Code
Size (Imp.)
Size (Metric)
Qty
4 x 1/2 4 x 5/8 4 x 3/4 4x1 5 x 5/8 5 x 3/4 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 1/2 6 x 1 3/4 6x2 7 x 5/8 7 x 3/4 7x1 7 x 11/4 7 x 11/2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2 8 x 21/4 8 x 21/2 8x3 8x3 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/4 10 x 21/2 10 x 3 10 x 3 10 x 31/2
3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.3 x 16 3.3 x 19 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 45 3.5 x 50 3.9 x 16 3.9 x 20 3.9 x 25 3.9 x 30 3.9 x 40 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 75 4.0 x 75 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 75 5.0 x 75 5.0 x 90
200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 200 200 200 200 200 200 100 100
Boxes 00412CWZ 00458CWZ 00434CWZ 00041CWZ 00558CWZ 00534CWZ 00612CWZ 00658CWZ 00634CWZ 00061CWZ 06114CWZ 06112CWZ 06134CWZ 00062CWZ 00758CWZ 00734CWZ 00071CWZ 07114CWZ 07112CWZ 00812CWZ 00858CWZ 00834CWZ 00081CWZ 08114CWZ 08112CWZ 08134CWZ 00082CWZ 08214CWZ 08212CWZ 00083CWZ 00083CWZ100 01034CWZ 00101CWZ 10114CWZ 10112CWZ 10134CWZ 00102CWZ 10214CWZ 10212CWZ 00103CWZ 00103CWZ100 10312CWZ
Product Code 00104CWZ 00121CWZ 12114CWZ 12112CWZ 00122CWZ 12212CWZ 00123CWZ 00123CWZ100 12312CWZ 00124CWZ
Size (Imp.)
Size (Metric)
Qty
10 x 4 12 x 1 12 x 11/4 12 x 11/2 12 x 2 12 x 21/2 12 x 3 12 x 3 12 x 31/2 12 x 4
5.0 x 100 6.0 x 25 6.0 x 30 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 75 6.0 x 75 6.0 x 90 6.0 x 100
100 200 200 200 200 200 200 100 100 100
6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3
3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80
700 620 500 540 470 390 350 270 200 180 250 190 160 140
6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3 10 x 4
3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80 5.0 x 100
45 40 35 35 30 25 20 16 12 10 15 12 10 8 6
Bags 00658CWZB 00634CWZB 00061CWZB 00834CWZB 00081CWZB 08114CWZB 08112CWZB 00082CWZB 08212CWZB 00083CWZB 10112CWZB 00102CWZB 10212CWZB 00103CWZB
Packs 00658CWZP 00634CWZP 00061CWZP 00834CWZP 00081CWZP 08114CWZP 08112CWZP 00082CWZP 08212CWZP 00083CWZP 10112CWZP 00102CWZP 10212CWZP 00103CWZP 00104CWZP
17
TWIN-THREADED & BLACKJAX SCREWS
TIMBER CONSTRUCTION SCREWS
ROUNDHEAD TWIN-THREADED
Materials
Woodscrew
Available in: Zinc (CR3)
To BS
EN ISO
14592:2
008
A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.
TWIN-THREADED Roundhead Product Code
Size (Imp.)
Size (Metric)
Qty
4 x 1/2 4 x 5/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 8 x 1/2 8 x 5/8 8 x 3/4 8x1
3.0 x 12 3.0 x 16 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25
200 200 200 200 200 200 200 200 200 200 200
Boxes 00412CRWZ 00458CRWZ 00612CRWZ 00658CRWZ 00634CRWZ 00061CRWZ 06114CRWZ 00812CRWZ 00858CRWZ 00834CRWZ 00081CRWZ
Product Code 08114CRWZ 08112CRWZ 00082CRWZ 00101CRWZ 10114CRWZ 10112CRWZ 00102CRWZ 10212CRWZ 00103CRWZ 00121CRWZ 12112CRWZ 00122CRWZ
Size (Imp.)
Size (Metric)
Qty
8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2 10 x 21/2 10 x 3 12 x 1 12 x 11/2 12 x 2
4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 75 6.0 x 25 6.0 x 40 6.0 x 50
200 200 200 200 200 200 200 200 200 200 200 200
BLACKJAX
Materials
Roundhead woodscrew Available in: Black Phos.
To BS
EN ISO
14592:2
008
A twin-threaded wood screw with a black japan finish designed to be used with black ironmongery.
BLACKJAX Roundhead Product Code
Size (Imp.)
Size (Metric)
Qty
6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2
3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50
200 200 200 200 200 200 200 200 200 200 200 200 200
Boxes 00658BJC 00634BJC 00061BJC 00858BJC 00834BJC 00081BJC 08114BJC 08112BJC 00082BJC 00101BJC 10114BJC 10112BJC 00102BJC
18
Product Code
Size (Imp.)
Size (Metric)
Qty
6x1 8x1 8 x 1 1/2 10 x 1 1/2
3.5 x 25 4.0 x 25 4.0 x 40 5.0 x 40
45 40 35 35
Packs 00061BJCP 00081BJCP 08112BJCP 10112BJCP
MIRROR SCREWS, CARCASS & CAPS
TIMBER CONSTRUCTION SCREWS
CARCASS SCREWS
Materials
Woodscrew
Available in: Black Phos.
Designed for the use in the construction of furniture carcasses.
CARCASS SCREWS Countersunk Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.0 x 33 4.0 x 45
8 x 11/4 8 x 13/4
500 500
Boxes 40033CARC 40045CARC
MIRROR SCREWS
PLASTIDOME SCREW CAPS
Dome head
Two piece cap and washer which provides a decorative finish and a protective cap.
For hanging a mirror where an aesthetic finish is required. Product Code
Screw Size (Imp.)
Cover Type
Qty
Packs 08114CMIRP 08112CMIRP
8 x 11/4 8 x 11/2
Chrome Chrome
10 8
8x1 8 x 11/4 8 x 11/2 8 x 11/4 8 x 11/2 8x2
Chrome Chrome Chrome Polished Brass Polished Brass Polished Brass
200 200 200 200 200 200
Product Code
To Fit (mm)
Finish
Qty
3.5 - 4.2 3.5 - 4.2 3.5 - 4.2 3.5 - 4.2
White Chrome Brown Black
100 100 100 100
Bags WHITEPLAST CHROMEPLAST BROWNPLAST BLACKPLAST
Boxes 00081CMIR200 08114CMIR200 08112CMIR200 08114BMIR200 08112BMIR200 00082BMIR200
SCREW CUPS A surface screw cup designed to allow the head of the screw to sit proud giving a decorative finish.
HINGED COVER CAPS Product Code
For cosmetic use to conceal screws.
To Fit (mm)
Finish
Qty
6 8 10 6 8 10
Brass Brass Brass Nickel Nickel Nickel
60 55 50 60 55 50
Packs Product Code
To Fit (mm)
Colour
Qty
3.5 - 5 3.5 - 5 5 - 10 5 - 10
White Black White Black
100 100 50 50
Bags SHCCWHITEP SHCCBLACKP LHCCWHITEP LHCCBLACKP
6BCUPP 8BCUPP 10BCUPP 6NCUPP 8NCUPP 10NCUPP
19
MIXED TRAYS & MIXED PACKS
TIMBER CONSTRUCTION SCREWS
MIXED TRAYS - ASSORTED SIZES Classic / Twin-Threaded / Self-Tapping
Product Code CLASSIC TRAY STS TRAY STST TRAY WOOD TRAY
895
Qty
Classic Yellow Zinc Self-Tapper Classic A2 Stainless Steel Zinc Twin-Threaded
895 1,305 895 1,140
895
pcs
1140
pcs
Classic速 SS
3.5 x 16mm
4.0 x 40mm
3.5 x 16mm
4.0 x 40mm
8 x 11/4
6 x 1/2
200 pcs
70 pcs
200 pcs
70 pcs
85 pcs
180 pcs
3.5 x 25mm
4.0 x 50mm
3.5 x 25mm
4.0 x 50mm
6 x 3/4
8 x 11/2
100 pcs
60 pcs
100 pcs
60 pcs
130 pcs
65 pcs
3.5 x 30mm
4.0 x 60mm
3.5 x 30mm
4.0 x 60mm
100 pcs
50 pcs
100 pcs
50 pcs
4.0 x 20mm
5.0 x 40mm
4.0 x 20mm
5.0 x 40mm
30 pcs
100 pcs
30 pcs
4.0 x 25mm
5.0 x 50mm
4.0 x 25mm
5.0 x 50mm
10 x 21/2
6 x 1/2
60 pcs
40 pcs
60 pcs
40 pcs
35 pcs
190 pcs
4.0 x 30mm
5.0 x 60mm
4.0 x 30mm
5.0 x 60mm
8x1
8x2
50 pcs
35 pcs
50 pcs
35 pcs
60 pcs
50 pcs
A boxed assortment of popular sizes sold together for your convenience.
1400 psc
pcs
Twin-Threaded
MIXED PACKS - ASSORTED SIZES
Classic速 Yellow
1305
pcs
Classic速 Yellow
100 pcs
20
Description
Solo Yellow
Self-Tapping
10 x 2
6x1
35 pcs
100 pcs
8 x 3/4
100 pcs
8 x 1/2
8 x 1/2
180 pcs
100 pcs 8x1
6 x 1/4
50 pcs
100 pcs
10 x 1/2
120 pcs
6 x 11/4
8 x 11/2
110 pcs
45 pcs
8x1
80 pcs
8 x 3/4
6 x 3/4
115 pcs
140 pcs
6 x 1/2
8 x 3/4
165 pcs
140 pcs
Product Code
Description
Qty
CLAFMP SOLOMP CWZMP
Classic Multi-Purpose Screws Solo Chipboard Screws Twin-Threaded Woodscrews
1,400 1,400 1,400
1400
10 x 5/8
70 pcs
psc
Twin-Threaded
1400 psc
Size (Metric)
Qty
Size (Metric)
Qty
Size (Imperial)
Qty
3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
200 200 200 200 200 100 100 100 100
3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100
200 200 200 200 200 100 100 100 100
8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 10 x 11/2 10 x 2 10 x 3 10 x 4
200 200 200 200 200 100 100 100 100
IN-DEX DECKING SCREWS
TIMBER CONSTRUCTION SCREWS
IN-DEX DECKING SCREWS For decking platforms Available in:
Exterior
To BS
A2/Aust. SS
EN ISO
14592:2
008
Used for attaching decking board to a timber substrate. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.
DECKING SCREW -
DECKING SCREW -
Exterior
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 65
9x2 9 x 21/2 9x3 9x2 9 x 21/2 9x3 9 x 21/2
250 250 250 500 500 500 1,000
4.5 x 50 4.5 x 65 4.5 x 75
9x2 9 x 21/2 9x3
175 145 120
Tubs 50DEX250 65DEX250 75DEX250 50DEX500 65DEX500 75DEX500 65DEX1000
Exterior
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 65
9x2 9 x 2 1/2 9x3 9x2 9 x 2 5/8 9x3 9 x 2 5/8
250 250 250 500 500 500 1,000
Tubs 50DEXB250 65DEXB250 75DEXB250 50DEXB500 65DEXB500 75DEXB500 65DEXB1000
Bags 50DEXTB 65DEXTB 75DEXTB
DECKING SCREW -
A2/Aust. SS
Double Countersunk
Product Code
Size (Metric)
Size (Imp. equiv.)
Qty
4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 65
9x2 9 x 2 5/8 9x3 9x2 9 x 2 5/8 9x3 9 x 2 5/8
250 250 250 500 500 500 1,000
Tubs 50DEXSS250 65DEXSS250 75DEXSS250 50DEXSS500 65DEXSS500 75DEXSS500 65DEXSS1000
21
IN-DEX TIMBER SCREWS
TIMBER CONSTRUCTION SCREWS
IN-DEX TIMBER SCREWS For timber constructions Available in:
Exterior
To BS
A4 SS
EN ISO
14592:2
008
Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications. Also available with a wafer head for improved clamping or a low profile finish.
HEX HEAD -
WAFER HEAD -
Exterior
8mm Hex Head
Size
Product Code
T30/T40 Recess
A/F
Qty
6.7 x 60 6.7 x 75 6.7 x 87 6.7 x 100 6.7 x 125 6.7 x 150 6.7 x 200 6.7 x 250
8 8 8 8 8 8 8 8
50 50 50 50 50 50 50 50
6.7 x 100 6.7 x 150 6.7 x 200
8 8 8
50 30 20
(Metric)
Exterior
Boxes
Size
Product Code
(Metric)
Bit Type
Qty
Boxes
60IN 75IN 87IN 100IN 125IN 150IN 200IN 250IN
Bags 100INDEXTB 150INDEXTB 200INDEXTB
Packs 100INDEXP 150INDEXP
6.7 x 100 6.7 x 150
HEX HEAD -
8 8
6 4
95INW 125INW 150INW 175INW 200INW 225INW 250INW 275INW 300INW 350INW 400INW
6.7 x 95 6.7 x 125 6.7 x 150 6.7 x 175
8mm Hex Head
50 50 50 50
50 50 50 25 25 25 25
6.7 x 95 6.7 x 125 6.7 x 150
T30 T30 T30
50 30 20
6.7 x 95 6.7 x 125 6.7 x 150
T30 T30 T30
6 5 4
Bags 95INDEXWB 125INDEXWB 150INDEXWB
Packs 95INDEXWP 125INDEXWP 150INDEXWP
A4 SS
8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300 8.0 x 350 8.0 x 400
T30 T30 T30 T30 T40 T40 T40 T40 T40 T40 T40
WAFER HEAD -
A4 SS
T40 Recess Product Code
Size (Metric)
A/F
Qty
8 8 8 8
25 25 25 25
Telescopic Tubes 75INDEXSST 100INDEXSST 125INDEXSST 150INDEXSST
6.7 x 75 6.7 x 100 6.7 x 125 6.7 x 150
Product Code
Bit Type
Qty
T40
25
Boxes (Driver Bit Included) 80INDEXWSS
22
Size (Metric)
8.0 x 80
COACH SCREWS & CARRIAGE BOLTS
TIMBER CONSTRUCTION SCREWS
HEAVY DUTY TIMBER SCREWS For heavy duty timber constructions Available in:
To BS
Exterior
EN ISO
14592:2
008
The heavy duty in-dex screw dramatically decreases installation time as it doesn’t require a pilot hole into most wood types and can be installed with a power tool. Coated with patented multi-layer corrosion resistant plating to achieve 1,000 hours salt spray test. This screw is ideal for outdoor applications or where extra strength is required.
HEX HEAD -
Exterior
10mm Hex Head Product Code
Size (Metric)
A/F
Qty
10 10 10 10 13 13 13
10 10 10 10 10 10 10
Bags (Socket driver Included) 875INH 8100INH 8150INH 8200INH 10100INH 10150INH 10200INH
8.0 x 75 8.0 x 100 8.0 x 150 8.0 x 200 10.0 x 100 10.0 x 150 10.0 x 200
COACH SCREWS
CARRIAGE BOLTS
Exterior woodscrew Available in:
Exterior bolt & nut
Exterior
Available in: To BS
EN ISO
Exterior To BS
14592:2
008
A traditional way of fastening timber applications, but has the added advantage of a corrosion resistant plating finish for external applications. Product Code
Size (Metric)
A/F
Qty
10 10 10 13 13 13 13 17 17 17
10 10 10 10 10 10 10 10 10 10
Bags 640INCSB 650INCSB 675INCSB 850INCSB 875INCSB 8100INCSB 8120INCSB 10100INCSB 10130INCSB 10150INCSB
EN ISO
14592:2
008
A heavy duty bolt used for fastening timbers. It has an impact resistant dome head and the square under the head locks into the timber to stop the bolt from spinning. Product Code
Size (Metric)
A/F
Qty
Bags 6 x 40 6 x 50 6 x 75 8 x 50 8 x 75 8 x 100 8 x 120 10 x 100 10 x 130 10 x 150
10100INCB 10150INCB 10160INCB 10200INCB 10220INCB
10 x 100 10 x 150 10 x 160 10 x 200 10 x 220
17 17 17 17 17
10 10 10 10 10
23
COACH SCREWS & NYLON PLUGS
TIMBER CONSTRUCTION SCREWS
COACH SCREWS
Materials
Used in wood & brick (with nylon plugs) Available in:
Zinc (CR3)
To BS
EN ISO
14592:2
008
A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or for use with a nylon plug into masonry. Product Code
Thread x Length
A/F
(mm)
(mm)
6 x 25 6 x 30 6 x 40 6 x 50 6 x 60 6 x 70 6 x 75 6 x 80 6 x 100 8 x 30 8 x 40 8 x 50 8 x 60 8 x 65 8 x 70 8 x 75 8 x 80 8 x 90 8 x 100 8 x 150 10 x 40 10 x 50 10 x 60 10 x 70 10 x 75 10 x 80 10 x 100 10 x 120 10 x 130 10 x 150 10 x 200 12 x 50 12 x 75 12 x 80 12 x 100 12 x 150
10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 19 19 19 19 19
250 250 200 200 200 200 100 100 200 200 200 100 100 100 100 100 100 50 50 50 100 100 100 100 100 50 50 50 50 25 20 100 50 25 25 25
6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 150
10 10 10 13 13 13 13 17 17 17
120 100 70 75 65 48 40 45 30 18
Qty
Boxes 0625CSC 0630CSC 0640CSC 0650CSC 0660CSC 0670CSC 0675CSC 0680CSC 06100CSC 0830CSC 0840CSC 0850CSC 0860CSC 0865CSC 0870CSC 0875CSC 0880CSC 0890CSC 08100CSC 08150CSC 1040CSC 1050CSC 1060CSC 1070CSC 1075CSC 1080CSC 10100CSC 10120CSC 10130CSC 10150CSC 10200CSC 1250CSC 1275CSC 1280CSC 12100CSC 12150CSC
24
Thread x Length
A/F
(mm)
(mm)
6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 150 12 x 75
10 10 10 13 13 13 13 17 17 17 19
Qty
Packs
Bags 0650CSCB 0670CSCB 06100CSCB 0850CSCB 0860CSCB 0880CSCB 08100CSCB 1050CSCB 1080CSCB 10150CSCB
Product Code
0650CSCP 0670CSCP 06100CSCP 0850CSCP 0860CSCP 0880CSCP 08100CSCP 1050CSCP 1080CSCP 10150CSCP 1275CSCP
10 10 10 5 5 5 5 4 4 2 2
COACH SCREWS & NYLON PLUGS
Used In Brick
Product Code
Thread x Length
A/F
(mm)
(mm)
6 x 60 6 x 80 8 x 100
10 10 13
40 30 12
6 x 60 6 x 80 8 x 100
10 10 13
2 2 2
Qty
Bags 0660CSCNB 0680CSCNB 08100CSCNB
Packs 0660CSCNP 0680CSCNP 08100CSCNP
NYLON PLUGS Product Code
Size (mm)
Qty
Bags 06NLPB 08NLPB 10NLPB
6 x 30 8 x 40 10 x 50
200 100 70
6 x 30 8 x 40 10 x 50
20 10 5
Packs 06NLPP 08NLPP 10NLPP
DRY LINING CONSTRUCTION SCREWS 26 - PLASTERBOARD SCREWS 28 - COLLATED SCREWS
25
PLASTERBOARD SCREWS
DRY LINING CONSTRUCTION SCREWS
PHILLIPS BUGLE HEAD
Coarse, fine and reverse thread available Available in: Black Phos.
Zinc (CR3)
Yellow
To BS
EN ISO
14592:
2008
Phillips Bugle Head drywall screws have a bugle head to prevent damage or tearing of the plasterboard.
COARSE THREAD -
FINE THREAD -
Black Phos.
For board to timber
Used to secure plasterboard to timber stud work.
Used to secure plasterboard to drywall track and ceiling track systems (Max 0.9mm)
Product Code
Product Code
Size (Metric)
Qty
3.5 x 32 3.5 x 38
2,000 1,500
00032DRYT 00038DRYT
3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 4.2 x 65 4.2 x 75 4.8 x 100
1,000 1,000 1,000 1,000 1,000 1,000 500 500 500
3.5 x 32 3.5 x 38 3.5 x 50
400 350 250
00025DRY 00032DRY 00038DRY 00042DRY 00045DRY 00050DRY 00055DRY 00060DRY 00065DRY 00075DRY 00090DRY 00100DRY
Tubs
Size (Metric)
Qty
3.5 x 32 3.5 x 38
2,000 1,500
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100
1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 100
200 200 200 200 200 200 200 200 200 200
3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 60 4.2 x 75 4.2 x 90
400 350 320 250 200 130 70
Tubs
00032DRYCT 00038DRYCT
Boxes
Boxes
00025DRYC 00032DRYC 00035DRYC 00038DRYC 00042DRYC 00050DRYC 00065DRYC 00075DRYC 00100DRYC
Bags 00032DRYCB 00038DRYCB 00050DRYCB
COARSE THREAD -
Yellow
For board to timber
Used to secure plasterboard to timber stud work. Product Code
Size (Metric)
Qty
4.8 x 125 4.8 x 150
100 100
Boxes 00125DRYCY 00150DRYCY
26 26
Black Phos.
For board to light steel
Boxes of 200’s 00025DRYS 00032DRYS 00038DRYS 00042DRYS 00045DRYS 00050DRYS 00060DRYS 00065DRYS 00075DRYS 00100DRYS
Bags 00032DRYB 00038DRYB 00042DRYB 00050DRYB 00060DRYB 00075DRYB 00090DRYB
PLASTERBOARD SCREWS FINE THREAD -
DRY LINING CONSTRUCTION SCREWS
REVERSE THREAD -
Zinc (CR3)
For board to steel (0.9mm)
Used to secure plasterboard to drywall track and ceiling track systems (Max 0.9mm) Product Code
Size (Metric)
Qty
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100 4.8 x 125 4.8 x 150
1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 100 100
Boxes 00025DRYZ 00032DRYZ 00038DRYZ 00042DRYZ 00045DRYZ 00050DRYZ 00055DRYZ 00060DRYZ 00065DRYZ 00075DRYZ 00090DRYZ 00100DRYZ 00125DRYZ 00150DRYZ
SELF-DRILL -
Product Code
Qty
3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55 3.9 x 65 4.2 x 75 4.8 x 100 4.8 x 125
1,000 1,000 1,000 1,000 1,000 500 500 500 500 100
3.5 x 32 3.5 x 42
400 320
Bags 00032PSDDB 00042PSDDB
3.5 x 25 3.5 x 38 3.5 x 42
1,000 1,000 1,000
DENSE BOARD -
Black Phos.
For dense board to timber
Product Code
Size (Metric)
Qty
3.9 x 22 3.9 x 30 3.9 x 45 3.9 x 55
1,000 1,000 1,000 1,000
Boxes 00022DRYD 00030DRYD 00045DRYD 00055DRYD
SHARP POINT WAFER HEAD -
Zinc (CR3)
(Max Drill Thickness: 0.9mm) Product Code
Size (Metric)
Qty
4.2 x 13.5
1,000
Boxes 08916WHSP
Boxes 00025PSDD 00032PSDD 00038PSDD 00042PSDD 00050PSDD 00055PSDD 00065PSDD 00075PSDD 00100PSDD 00125PSDD
Qty
Zinc (CR3)
Used to secure plasterboard to drywall track and ceiling track systems (Max 2.5-3.0mm) Size (Metric)
Size (Metric)
Boxes 00025DRYR 00038DRYR 00042DRYR
For board to steel (2.5mm)
Product Code
Black Phos.
For dense board to steel (0.9mm)
SELF-DRILL WAFER HEAD -
Zinc (CR3)
(Max Drill Thickness: 2.5mm) Product Code
Size (Metric)
Qty
4.2 x 13.5 4.2 x 16 4.2 x 19 4.2 x 25
1,000 1,000 1,000 1,000
Boxes 08916WHSD 00016WHSD 00019WHSD 00025WHSD
27 27
DRY LINING CONSTRUCTION SCREWS
COLLATED SCREWS
COLLATED SCREWS A variety of collated fasteners to suit multiple applications. Available in:
COARSE THREAD -
Black Pass.
Zinc (CR3)
Yellow
Product Code
Size (Metric)
Qty
3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 55
1,000 1,000 1,000 800
3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 50 4.2 x 65 4.2 x 75 4.8 x 100
1,000 1,000 1,000 1,000 1,000 1,000 500 500 500
Tubs 00035CDRYTUB 00038CDRYTUB 00045CDRYTUB 00055CDRYTUB
To BS
EN ISO
14592:
2008
Zinc (CR3)
For board to steel (2.5mm)
Product Code
Size (Metric)
Qty
3.5 x 35 3.5 x 45 3.5 x 50
1,000 1,000 1,000
Boxes 00035COLLSD 00045COLLSD 00050COLLSD
SELF-DRILLING WING TIP - Exterior
Boxes 00025COLDYS 00032COLDYS 00035COLDYS 00038COLDYS 00045COLDYS 00050COLDYS 00065COLDYS 00075COLDYS 00100COLDYS
Exterior
SELF-DRILL -
Black Pass.
For board to timber
Used to secure plasterboard to timber stud work.
A2/Aust. SS
Zinc (CR3)
For light section steel
Size
Product Code
(Metric)
Plating
Qty
Ruspert Zinc
1,000 1,000
Boxes 00044COLLW 4865COLLW
4.8 x 44 4.8 x 65
FLOORING SCREW Flooring to timber joists
FINE THREAD -
Zinc (CR3)
For board to steel (0.9mm)
Product Code
Size (Metric)
Qty
4.2 x 55
1,000
Boxes 00055COLLF
Used to secure plasterboard to drywall track and ceiling track systems (Max 0.9mm) Product Code
Size (Metric)
Qty
3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55
1,000 1,000 1,000 1,000 1,000 1,000 1,.000
CLASSIC -
A2/Aust. SS
Timber to timber
Boxes 00025COLDZYS 00032COLDZYS 00035COLDZYS 00038COLDZYS 00042COLDZYS 00050COLDZYS 00055COLDZYS
28 28
Product Code
Size (Metric)
Qty
4.0 x 40 4.0 x 50
1,000 1,000
Boxes 4040CLASSCOL 4050CLASSCOL
Yellow
METAL CONSTRUCTION SCREWS
30 - STITCHING SCREWS 30 - SELF-DRILLING SCREWS 32 - COMPOSITE PANEL SCREWS 32 - SLASH POINT SCREWS 33 - WING-TIP SCREWS
34 - COVER CAPS 34 - EPDM WASHERS 35 - SELA COVERS 36 - METAL FRAMING SCREWS 37 - SELF-TAPPING SCREWS
29
STITCHING & SELF-DRILLING SCREWS
METAL CONSTRUCTION SCREWS
STITCHING SCREWS For joining cladding sheets Available in:
Exterior
Used for stitching sheet metal without the need to pre-drill a hole. Self-drilling point and tapered shank, with a washered hexagon head. Silver ruspert plating for a reliable and durable corrosion resistant coating which resists over 1,000 hours salt-spray test.
STITCHING SCREWS 8mm Head, Coarse Thread
Size
Product Code
(Metric)
Washer Max DT Size (mm) (mm)
Qty
Boxes
Product Code
Size (Metric)
Washer Max DT Size (mm) (mm)
Qty
Bags
S22W16B S25W16B
6.3 x 22 6.3 x 25
16 16
1.7 1.7
100 100
S25W16BB
6.3 x 25
16
1.7
22
Max DT = Maximum drill thickness
Max DT = Maximum drill thickness
INTERNAL SELF-DRILLING SCREWS For joining metal to metal Available in: Zinc (CR6)
INTERNAL SELF-DRILLING SCREWS 6*/8mm Head, Coarse Thread
A hex head self drilling screw in zinc, for general fixing of steel to steel applications.
Product Code
Size
Size
Max DT
(Imp.)
(Metric)
(mm)
8 x 1/2 8 x 3/4 10 x 1/2 10 x 5/8 10 x 3/4 12 x 3/4 12 x 1 12 x 11/4 12 x 11/2 12 x 13/4
4.2 x 13 4.2 x 19 4.8 x 13 4.8 x 16 4.8 x 19 5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 45
2.5 2.5 3 3 3 5 5 5 5 5
Qty
Boxes 00812HWSD* 00834HWSD* 01012HWSD 01058HWSD 01034HWSD 01234HWSD 00121HWSD 12114HWSD 12112HWSD 12134HWSD
1,000 1,000 1,000 1,000 1,000 500 500 500 500 500
Max DT = Maximum drill thickness.
30
EXTERNAL SELF-DRILLING SCREWS
METAL CONSTRUCTION SCREWS
EXTERNAL SELF-DRILLING SCREWS For joining roofing sheet to section steel Available in:
Exterior
Self-drilling hexagon head, for joining roofing sheets to light and heavy gauge steel. With or without EPDM washer. Silver ruspert plating for a reliable and durable corrosion resistant coating which resists over 1,000 hours salt-spray.
FOR LIGHT SECTION STEEL 8mm Head, Coarse Thread
Max Drilling Thickness 5mm
Used for attaching to metal (max 5mm) without the need to pre-drill a hole. Product Code
(Metric)
Washer Max CT Size (mm) (mm)
Qty
5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70 5.5 x 70 5.5 x 100 5.5 x 100
No Washer 16 No Washer 16 No Washer 16 No Washer 16 No Washer 16 No Washer 16
100 100 100 100 100 100 100 100 100 100 100 100
Size
Boxes L25B L25W16B L32B L32W16B L38B L38W16B L50B L50W16B L70B L70W16B L100B L100W16B
Product Code
(Metric)
Washer Max CT Size (mm) (mm)
Qty
5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70
No Washer 16 No Washer 16 No Washer 16 No Washer 16 No Washer
35 49 35 49 35 49 35 49 35
Size
Bags 12 9 19 16 25 22 36 33 63 60 93 90
L25BB L25W16BB L32BB L32W16BB L38BB L38W16BB L50BB L50W16BB L70BB
12 9 19 16 25 22 36 33 63
Max CT = Maximum clamping thickness.
FOR HEAVY SECTION STEEL 8mm Head, Fine Thread
Max Drilling Thickness 12mm
Used for attaching to metal (max 12mm) without the need to pre-drill a hole. Product Code
(Metric)
Washer Max CT Size (mm) (mm)
Qty
5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 55 5.5 x 55 5.5 x 65 5.5 x 80 5.5 x 100 5.5 x 100
No Washer 16 No Washer 16 No Washer 16 16 16 No Washer 16
100 100 100 100 100 100 100 100 100 100
Size
Boxes H32B H32W16B H38B H38W16B H55B H55W16B H65W16B H80W16B H100B H100W16B
Product Code
Size (Metric)
Washer Max CT Size (mm) (mm)
Qty
Bags 16 13 18 15 35 32 42 57 80 77
H38W16BB
5.5 x 38
16
15
49
Max CT = Maximum clamping thickness.
31
COMPOSITE PANEL & SLASH POINT SCREWS
METAL CONSTRUCTION SCREWS
COMPOSITE PANEL ROOFING SCREWS For joining composite panel to light section steel Available in:
Exterior
Specifically designed to attach composite panel to light section steel. Self-drilling point with hexagon head.
COMPOSITE PANEL TO LIGHT SECTION STEEL 8mm Head, Coarse Thread 6.3 Ø
5.5 Ø
(Metric)
(mm)
(mm)
Box Qty
5.5/6.3 x 82 5.5/6.3 x 98 5.5/6.3 x 115 5.5/6.3 x 115
32 48 65 65
63 78 95 95
100 100 100 100
Size
Product Code
Min PT Max PT
Boxes LH82W16B LH98W16B LH115W16B LH115W19B
Max Drilling Thickness 5mm
Min PT = Approximate minimum panel thickness Max PT = Approximate maximum panel thickness
SLASH POINT ROOFING SCREWS For joining sheet metal to wood Available in:
Exterior
Designed to attach sheet metal (max 0.9mm) to timber. Hexagon head with slash point for easy pick up.
SLASH POINT FOR TIMBER 8mm Head, Coarse Thread
Max Drilling Thickness For Steel 0.9mm
Product Code
Size (Metric)
Washer Max FT (mm) Size
Box Qty
Boxes DS32W16B DS45W16B DS45W19B DS60W16B DS60W19B DS80W16B DS100W16B DS150W16B
6.3 x 32 6.3 x 45 6.3 x 45 6.3 x 60 6.3 x 60 6.3 x 80 6.3 x 100 6.3 x 150
16 16 19 16 19 16 16 16
0.9 5 5 17 17 37 57 110
100 100 100 100 100 100 100 100
Product Code
Size (Metric)
Washer Max FT (mm) Size
Bag Qty
Bags DS32W16BB DS45W16BB
6.3 x 32 6.3 x 45
16 16
0.9 5
45 45
Max FT = Maximum fixture thickness.
32
WING TIP SELF-DRILLING SCREWS
METAL CONSTRUCTION SCREWS
WING TIP SELF-DRILLING SCREWS For joining wood to section steel Available in:
Zinc (CR6)
Exterior
Winged roofing screws, for fixing timber to light and heavy section steel. Countersunk head, winged with a self-drilling point. Light section steel thickness 5mm and heavy section steel thickness 12mm.
FOR LIGHT SECTION STEEL Coarse Thread
Max Drilling Thickness 5mm
Specifically designed to attach wood to metal (max 5mm)
INTERNAL SCREWS Product Code
EXTERNAL SCREWS
Size
Max FT
(Metric)
(mm)
Box Qty
Product Code
4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100 5.5 x 130 5.5 x 150
18 28 43 63 78 108 128
200 200 200 100 100 100 100
LW38S LW50S LW65S LW85S LW100S
4.8 x 38 5.5 x 50 5.5 x 65
18 28 43
35 35 35
Boxes LW38B LW50B LW65B LW85B LW100B LW130B LW150B
NOTE: LW38B has a MDT of 4mm
Size
Max FT
(Metric)
(mm)
Box Qty
4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100
18 28 43 63 78
200 200 200 100 100
Boxes
Max FT = Maximum fixture thickness.
Bags LW38BB LW50BB LW65BB
Max FT = Maximum fixture thickness.
FOR HEAVY SECTION STEEL
Fine Metric Thread
Specifically designed to attach wood to metal (max 12mm) Product Code
Size
Max FT
(Metric)
(mm)
Box Qty
5.5 x 45 5.5 x 65 5.5 x 85 5.5 x 120
13 29 49 84
200 200 100 100
Max Drilling Thickness 12mm
Boxes HW45B HW65B HW85B HW120B
Max FT = Maximum fixture thickness.
33
METAL CONSTRUCTION SCREWS
COVER CAPS & EPDM WASHERS
COVER CAPS AND EPDM WASHERS For sealing roofing and cladding screws
A selection of washers and cover caps for use with our range of roofing screws. EPDM washer used where parts come in contact with water. Cover caps are perfect to blend in screws with coloured panels.
HEX HEAD COVER CAPS Bag Quantities of 1,000
Colour
Code (16mm)
Code (19mm)
1600E53CAP
1900E53CAP
1600E55CAP
1900E55CAP
1604C39CAP
1904C39CAP
1604D44CAP
1904D44CAP
1604E53CAP
1904E53CAP
1606E53CAP
1906E53CAP
1608B17CAP
1908B17CAP
1608B29CAP
1908B29CAP
1608C35CAP
1908C35CAP
1610A05CAP
1910A05CAP
1610B19CAP
1910B19CAP
1610B23CAP
1910B23CAP
1610C31CAP
1910C31CAP
1610E55CAP
1910E55CAP
1612B17CAP
1912B17CAP
1612B21CAP
1912B21CAP
1612B27CAP
1912B27CAP
1612B29CAP
1912B29CAP
1612D45CAP
1912D45CAP
1614C37CAP
1914C37CAP
1614C39CAP
1914C39CAP
1614E49CAP
1914E49CAP
1614E53CAP
1914E53CAP
1618B17CAP
1918B17CAP
1618B25CAP
1918B25CAP
Bags Black White Terracotta Petra Poppy Tangerine Beige Vandyke Brown Bamboo Goosewing Grey Mushroom Svelte Grey Honesty Aztec Meadowland Moorland Green Olive Green Juniper Green Sage Jade Pinewood Eau de Nil Verona Albatross Merlin Grey Raven/Slate Blue Wedgwood Blue Ocean Blue Solent Blue Britannia Cornflower Morocco Brown Beige White Oyster Ivory Flame Red Rubine Burano Ultra Marine Sargasso
34
1618B29CAP
1918B29CAP
1618C37CAP
1918C37CAP
1618C39CAP
1918C39CAP
1618E53CAP
1918E53CAP
1618E58CAP
1918E58CAP
1620E51CAP
1920E51CAP
Code (19mm)
Code (16mm)
Colour Mid Blue Gentian Blue Mountain Bahama/Sky Caprice Heritage Glen Green Pale Peppermint Squirrel Mouse Grey Slate Grey Anthracite Concrete Grey Oyster Quartz Pale Brown Hamlet White (Creamy) White Alum Dark Silver Pure White Metallic Silver Bleu Concorde
16RAL5005CAP 19RAL5005CAP 16RAL5010CAP 19RAL5010CAP 16RAL5014CAP 19RAL5014CAP 16RAL5015CAP 19RAL5015CAP 16RAL5019CAP 19RAL5019CAP 16RAL6002CAP 19RAL6002CAP 16RAL6021CAP 19RAL6021CAP 16RAL6027CAP 19RAL6027CAP 16RAL7000CAP 19RAL7000CAP 16RAL7005CAP 19RAL7005CAP 16RAL7012CAP 19RAL7012CAP 16RAL7016CAP 19RAL7016CAP 16RAL7023CAP 19RAL7023CAP 16RAL7035CAP 19RAL7035CAP 16RAL7039CAP 19RAL7039CAP 16RAL8025CAP 19RAL8025CAP 16RAL9002CAP 19RAL9002CAP 16RAL9003CAP 19RAL9003CAP 16RAL9006CAP 19RAL9006CAP 16RAL9007CAP 19RAL9007CAP 16RAL9010CAP 19RAL9010CAP 16S7500CAP
19S7500CAP
16510ACAP
19510ACAP
EPDM WASHERS -
Galv. Steel
Aluminium
Metal Washer with Rubber (EPDM)
16RAL1002CAP 19RAL1002CAP 16RAL1011CAP 19RAL1011CAP 16RAL1013CAP 19RAL1013CAP 16RAL1014CAP 19RAL1014CAP 16RAL3000CAP 19RAL3000CAP 16RAL3003CAP 19RAL3003CAP 16RAL3004CAP 19RAL3004CAP 16RAL5002CAP 19RAL5002CAP 16RAL5003CAP 19RAL5003CAP
Product Code
Washer
Hole
(mm)
(mm)
Washer Type
Bag Qty
16 19 29
6.8 5.8 6.8
Galv. Steel Galv. Steel Aluminium
100 100 100
Bags WG16 WG19 WA29
SELA COVERS & WASHERS
METAL CONSTRUCTION SCREWS
COVERS AND WASHERS
For sealing roofing and cladding screws Sela washers, Sela covers and Dowty type washers are a versatile product that are used to create a water tight seal for use with screws, bolts and nails.
SELA COVER AND WASHER SC
SW
Used when securing roofing sheets to create a watertight seal. When using spring head roofing nails just a washer is required as the head of the nail will cover the entire washer to provide a watertight seal. If using hook bolts you will also require a Sela Cover to cover the washer and nut to complete the seal. Product Code
(mm)
Bag Qty
28 M6 x 28 M8 x 28
75 75 75
Size
Bags 28SC 628SW 828SW
CORRUGATED SHEET FIXINGS
Designed for fixing plastic corrugated sheets to timber. The hinged cover cap provides a tight seal to prevent water ingress. Product Code
Colour
(Imp.)
Bag Qty
10 x 3 10 x 3
50 50
Screw Size
Bags CSFC CSFB
Clear Black
DOWTY TYPE WASHER
Perfect for Spring Head Nails and Drive Screws
Used mainly with spring head roofing nails for attaching corrugated roofing sheets to wooden purlins. The washer provides a watertight seal when used correctly. Product Code
(mm)
Bag Qty
M6 M8
75 75
Size
Bags 6BPRS 8BPRS
COLLATED NAILS & FUEL CELLS DESIGNED FOR USE IN
CORDLESS GAS & PNEUMATIC NAILERS See page 75 35
METAL FRAMING SCREWS
METAL CONSTRUCTION SCREWS
METAL FRAMING SCREWS For fixing steel to steel applications Available in:
Exterior
Zinc
Used for stitching metal or attaching to metal without the need to pre-drill a hole.
PAN HEAD -
PAN HEAD -
Exterior
Low Profile
Product Code
(Metric)
MDT (mm)
Box Qty
Product Code
4.8 x 16
3
500
3
200
00658PPSD 00061PPSD 07716PPSD 00812PPSD 00834PPSD 00081PPSD
Size
Boxes LPP16
Size
Size
(Imperial)
(Metric)
MDT (mm)
Box Qty
6 x 5/8 6x1 7 x 7/16 8 x 1/2 8 x 3/4 8x1
3.5 x 16 3.5 x 25 3.9 x 11 4.2 x 13 4.2 x 19 4.2 x 25
2.5 2.5 2.5 2.5 2.5 2.5
1,000 1,000 1,000 1,000 1,000 1,000
4.2 x 13 4.2 x 19 4.2 x 25
2.5 2.5 2.5
200 200 200
Boxes
Boxes of 200’s 16LP
Zinc
Standard Profile
4.8 x 16
MDT = Maximum drill thickness.
WAFER HEAD -
Boxes of 200’s Exterior
812PSD 834PSD 81PSD
Low Profile
8 x 1/2 8 x 3/4 8x1
MDT = Maximum drill thickness.
Product Code
Size (Metric)
MDT (mm)
Box Qty
3
200
PAN HEAD -
Zinc
Standard Profile
Boxes of 200’s 22LPW
4.8 x 22
MDT = Maximum drill thickness.
PANCAKE HEAD -
Exterior
Product Code
Size
Size
(Imperial)
(Metric)
MDT (mm)
Box Qty
8 x 1/2
4.2 x 13
2.5
1,000
Boxes
Low Profile
00812SPSD
MDT = Maximum drill thickness.
Product Code
(Metric)
MDT (mm)
Box Qty
5.5 x 19 5.5 x 26
5 5
500 500
5
200
Size
Boxes FP19 FP26
Boxes of 200’s 19FP
5.5 x 19
MDT = Maximum drill thickness.
36
SELF-TAPPING SCREWS
METAL CONSTRUCTION SCREWS
SELF-TAPPING SCREWS Available in:
Zinc
Black
Used for stitching metal or attaching to metal. A pre-drilled hole is required.
PAN HEAD -
Product Code
COUNTERSUNK -
Zinc
(Imperial)
Driver Bit Size
Qty
2 x 1/4 2 x 5/16 4 x 3/8 4 x 1/2 6 x 1/4 6 x 3/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1/2 10 x 5/8 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 1/2 12 x 1 12 x 11/2 14 x 3/4
No.1 No.1 No.1 No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.3 No.3 No.3 No.3
1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 1,000 1,000 1,000 500 500 500 1,000 500 1,000
6 x 1/4 6 x 3/8 6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 10 x 1/2 10 x 5/8 10 x 3/4
No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2
30 25 20 18 16 16 14 14 12 10 10 10
Size
Boxes 00214CPAZ 02516CPAZ 00438CPAZ 00412CPAZ 00614CPAZ 00638CPAZ 00612CPAZ 00658CPAZ 00634CPAZ 00061CPAZ 00838CPAZ 00812CPAZ 00858CPAZ 00834CPAZ 00081CPAZ 08114CPAZ 08112CPAZ 00082CPAZ 01012CPAZ 01058CPAZ 01034CPAZ 00101CPAZ 10114CPAZ 10112CPAZ 00102CPAZ 01212CPAZ 00121CPAZ 12112CPAZ 01434CPAZ
(Imperial)
Driver Bit Size
Qty
4 x 3/8 4 x 3/4 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 11/2 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 11/2
No.1 No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.3
1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 1,000 500 500 500
6 x 3/4 8 x 1/2 8 x 3/4 8x1 8 x 1 1/4 8 x 1 1/2 10 x 1 1/4
No.2 No.2 No.2 No.2 No.2 No.2 No.2
25 22 20 18 16 14 10
Size
Boxes
Packs 00614CPAZP 00638CPAZP 00612CPAZP 00634CPAZP 00838CPAZP 00812CPAZP 00858CPAZP 00834CPAZP 00081CPAZP 01012CPAZP 01058CPAZP 01034CPAZP
Product Code
Zinc
00438CCAZ 00434CCAZ 00612CCAZ 00658CCAZ 00634CCAZ 00061CCAZ 06114CCAZ 06112CCAZ 00838CCAZ 00812CCAZ 00858CCAZ 00834CCAZ 00081CCAZ 08114CCAZ 08112CCAZ 08134CCAZ 00082CCAZ 01034CCAZ 00101CCAZ 10114CCAZ 10112CCAZ 00102CCAZ 12112CCAZ
Packs 00634CCAZP 00812CCAZP 00834CCAZP 00081CCAZP 08114CCAZP 08112CCAZP 10114CCAZP
37
SELF-TAPPING SCREWS
METAL CONSTRUCTION SCREWS
FLANGE HEAD -
(Imperial)
Driver Bit Size
Qty
6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 10 x 3/4
No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2
1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000
8 x 3/8 8 x 1/2 8 x 3/4 8x1
No.2 No.2 No.2 No.2
16 16 14 12
Size
Product Code
FLANGE HEAD -
Zinc
Boxes
Product Code
(Imperial)
Driver Bit Size
Qty
6x1 8 x 1/2
No.2 No.2
1,000 1,000
Size
Boxes
00612CFAZ 00634CFAZ 00838CFAZ 00812CFAZ 00858CFAZ 00834CFAZ 00081CFAZ 08114CFAZ 01034CFAZ
00061CFAB 00812CFAB
Packs 00838CFAZP 00812CFAZP 00834CFAZP 00081CFAZP
SDS Plus Drill Bits Features Twin V flute design for increased drilling performance and dust extraction. Large range of sizes for most applications, including direct fix anchors.
High quality Tungsten Carbide tip. P.G.M. approved and marked.
SDS Plus Steels
Point
38
Black
Tile
Spade
Gouge
SEE PAGE
102
WINDOW FABRICATION SCREWS 40 - WINDOW SCREWS 41 - PLASTIC RETENTION SCREWS 42 - METAL RETENTION SCREWS
39
WINDOW FABRICATION SCREWS
WINDOW SCREWS BAYPOLE SCREWS
WEATHER BAR SCREWS
Zinc (CR3)
Zinc (CR3)
• Nipple Head • Self-Tapping Thread • Self-Drilling Tip (Metric)
Box Qty
4.2 x 13
1,000
Size
Product Code
• Wafer Flange Head • Self-Tapping Thread & V Flute • Self-Drilling Tip
Zinc
REINFORCED FRAME SCREWS Zinc (CR3)
Martensitic SS
289Z 290Z 291Z 292Z 293Z 294Z 295Z
200 200 200 200 200 200 200
Yellow
(Metric)
Box Qty
4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25
1,000 1,000 1,000 1,000
4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25
1,000 1,000 1,000 1,000
Size
Product Code
Zinc 130Z 131Z 132Z 133Z 130SS 131SS 132SS 133SS
• Shallow Pan Countersunk Head • Self-Tapping Thread • AB Point Tip (Metric)
Box Qty
4.8 x 55 4.8 x 65 4.8 x 80 4.8 x 95
200 200 200 200
Size
Product Code
Yellow
Stainless Steel
191Y 192Y 193Y 194Y
MACHINE SCREWS
CILL SCREWS
Zinc (CR3)
Zinc (CR3)
• Countersunk Head • Metric Thread • B Point Tip
• Bugle Head • Twin Thread • Self-Drilling Tip (Metric)
Box Qty
4.2 x 50 4.2 x 55 4.2 x 65
500 500 200
Size
Product Code
(Metric)
Box Qty
M5 x 20 M5 x 30 M5 x 40 M5 x 45 M5 x 50
500 500 500 500 500
Size
Zinc
Zinc
40 40
4.8 x 40 4.8 x 50 4.8 x 60 4.8 x 70 4.8 x 80 4.8 x 90 4.8 x 100
ELEMENT SCREWS
• Pan Head • Self-Tapping Thread • Self-Drilling Tip
225Z 226Z 227Z
Box Qty
Zinc
241Z
Product Code
(Metric)
Size
Product Code
520Z 530Z 540Z 545Z 550Z
HARDWARE TO PLASTIC
WINDOW FABRICATION SCREWS
FOR PLASTIC REINFORCED PVCu FRAMES Available in: Zinc (CR3)
Yellow
A2/Aust. SS
A comprehensive range of self piercing sharp point screws used for the construction of PVCu windows\doors and for attaching hardware to the frames. Also used to retain or attach to frames using modern day plastic reinforcement.
200 RANGE Zinc (CR3)
Yellow
100 RANGE A2/Aust. SS
Zinc
Yellow
• Shallow Countersunk Head with Ribs • Self-Tapping Thread • Gimlet Tip
• Countersunk Head • High/Low Thread • Slash Tip
Product Code
Product Code
(Metric)
Box Qty
4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25 4.8 x 38
1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000
4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25
1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000
4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.8 x 25
1,000 1,000 1,000 1,000 1,000 1,000 1,000
Size
Zinc
(Metric)
Box Qty
4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25
1,000 1,000 1,000 1,000
4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25
1,000 1,000 1,000 1,000
Size
Zinc
201Z 202Z 204Z 205Z 203Z 206Z 207Z 208Z 209Z* 210Z*
Yellow 201Y 202Y 204Y 205Y 203Y 206Y 207Y 208Y 209Y*
104Z 105Z 106Z 109Z*
Yellow 104Y 105Y 106Y 109Y*
* REPAIR SCREWS for stripped holes.
Stainless Steel 201SS 202SS 204SS 205SS 203SS 206SS 209SS*
* REPAIR SCREWS for stripped holes.
41 41
WINDOW FABRICATION SCREWS
FRICTION TO PLASTIC
FOR PLASTIC REINFORCED PVCu FRAMES Available in: Zinc (CR3)
A2/Aust. SS
A comprehensive range of self piercing sharp point screws used for the construction of a PVCu window\door to fix friction stay on to PVCu.
111 RANGE
215 RANGE
Zinc (CR3)
Zinc (CR3)
• Shallow Countersunk Head • High/Low Thread • Double Slash Tip
• Shallow Pan Head with Serrations • Single Deep Thread • Gimlet Tip
(Metric)
Box Qty
4.3 x 20 4.3 x 25
1,000 1,000
Size
Product Code
A2/Aust. SS
Zinc
Product Code
(Metric)
Box Qty
4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30
1.000 1.000 1.000 1.000
4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30
1.000 1.000 1.000 1.000
Size
Zinc
111Z 112Z
215Z 216Z 217Z 218Z
Stainless Steel 215SS 216SS 217SS 218SS
211 RANGE Zinc (CR3)
A2/Aust. SS
• Shallow Countersunk Head • Single Deep Thread • Gimlet Tip Product Code
(Metric)
Box Qty
4.3 x 16 4.3 x 20 4.3 x 25
1,000 1,000 1,000
4.3 x 16 4.3 x 20 4.3 x 25
1,000 1,000 1,000
Size
Zinc 213Z 211Z 212Z
Stainless Steel 213SS 211SS 212SS
42 42
HARDWARE TO METAL
WINDOW FABRICATION SCREWS
FOR METAL REINFORCED PVCu FRAMES Available in: Zinc (CR3)
Yellow
Martensitic SS
A comprehensive range of self-drilling screws used for the construction of a PVCu window/door and for attaching hardware where there is a metal reinforcement.
120 RANGE Zinc (CR3)
Yellow
150 RANGE Martensitic SS
• Countersunk Head (# with Ribs) • Self-Tapping Thread • Self-Drilling Tip Box Qty
3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.6 x 29 3.9 x 32 3.9 x 38 3.9 x 45
1,000 1,000 1,000 1,000 1,000 1,000 1,000 500
3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38 3.9 x 45
1,000 1,000 1,000 1,000 1,000 1,000 500
3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38
1,000 1,000 1,000 1,000 1,000
Zinc 120Z# 121Z# 122Z# 123Z 126Z 124Z 125Z 127Z
Yellow 120Y# 121Y# 122Y# 123Y 124Y 125Y 127Y
(Metric)
Box Qty
M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38
1,000 1,000 1,000 1,000 500
M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38
1,000 1,000 1,000 1,000 500
Size
Product Code
Zinc 150Z 151Z 153Z 154Z 155Z
Yellow 150Y 151Y 153Y 154Y 155Y
230 RANGE
Stainless Steel 121SS# 122SS# 123SS 124SS 125SS
Yellow
• Countersunk Head • Metric Thread • Self-Drilling Tip
(Metric)
Size
Product Code
Zinc (CR3)
Zinc (CR3)
423 RANGE
• Countersunk Facet Head • Metric Thread • Self-Drilling Tip Product Code
Zinc (CR3)
(Metric)
Box Qty
M4 x 13 M4 x 16 M4 x 19
1,000 1,000 1,000
M4 x 16
1,000
Size
Zinc 230Z 231Z 232Z
• Countersunk Head • Self-Tapping Thread • Self-Drilling Tip Product Code
Stainless Steel 231SS
(Metric)
Box Qty
4.8 x 25 4.8 x 38 4.8 x 45
1,000 500 500
Size
Zinc 423Z 425Z 427Z
43 43
WINDOW FABRICATION SCREWS
FRICTION TO METAL
FOR METAL REINFORCED PVCu FRAMES Available in: Zinc (CR3)
Martensitic SS
A range of fasteners designed to fix friction stay on to PVCu with metal re-enforcement.
135 RANGE & 141* RANGE Zinc (CR3)
Martensitic SS
• Shallow Countersunk Head • Self-Drilling Thread • Self-Tapping Tip (Metric)
Box Qty
M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38 M4 x 16 M4 x 19
1,000 1,000 1,000 1,000 500 1,000 1,000
M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 19
1,000 1,000 1,000 1,000 1,000
Size
Product Code
Zinc 135Z 136Z 137Z 138Z 141Z* 142Z* 143Z*
Stainless Steel 135SS 136SS 137SS 138SS 143SS*
* REPAIR SCREWS for stripped holes.
SEE PAGE
MASONRY & CONCRETE SCREWS FASTER & STRONGER THAN NYLON FIXINGS 44 44
65-66
NUTS, BOLTS, SETS AND WASHERS 46 - CARRIAGE BOLTS 47 - ROOFING BOLTS 47 - CABLE TRAY BOLTS 48 - THREADED BAR
48 - SETS 50 - NUTS 51 - WASHERS
45
CARRIAGE CARRIAGEBOLTS BOLTS& NUTS
NUTS, BOLTS, SETS & WASHERS
CARRIAGE BOLT & HEX NUT
Materials
Available in: Zinc (CR3) To BS
EN ISO
14592:2
008
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber. Product Code
Thread x Length
Nut A/F
(mm)
(mm)
M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 65 M6 x 70 M6 x 75 M6 x 100 M6 x 130 M6 x 150 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 45 M8 x 50 M8 x 60 M8 x 65 M8 x 70 M8 x 75 M8 x 80 M8 x 90 M8 x 100 M8 x 110 M8 x 120 M8 x 130 M8 x 150 M8 x 180 M8 x 200 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 65 M10 x 70 M10 x 75 M10 x 80 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 140 M10 x 150 M10 x 160 M10 x 180 M10 x 200 M10 x 220 M10 x 240 M10 x 260 M10 x 280
10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17
Qty
Boxes 0620CB 0625CB 0630CB 0640CB 0650CB 0660CB 0665CB 0670CB 0675CB 06100CB 06130CB 06150CB 0820CB 0825CB 0830CB 0835CB 0840CB 0845CB 0850CB 0860CB 0865CB 0870CB 0875CB 0880CB 0890CB 08100CB 08110CB 08120CB 08130CB 08150CB 08180CB 08200CB 1025CB 1030CB 1035CB 1040CB 1050CB 1065CB 1070CB 1075CB 1080CB 1090CB 10100CB 10110CB 10120CB 10130CB 10140CB 10150CB 10160CB 10180CB 10200CB 10220CB 10240CB 10260CB 10280CB
46 46
200 200 200 200 200 100 100 100 100 100 50 50 200 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 100 100 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 10 10 10 10 10
Product Code
Thread x Length
Nut A/F
(mm)
(mm)
10300CB 1250CB 1265CB 1275CB 1290CB 12100CB 12110CB 12120CB 12130CB 12140CB 12150CB 12160CB 12180CB 12200CB 12220CB 12240CB 12260CB 12280CB 12300CB 16100CB 16110CB 16150CB 16180CB 16200CB
M10 x 300 M12 x 50 M12 x 65 M12 x 75 M12 x 90 M12 x 100 M12 x 110 M12 x 120 M12 x 130 M12 x 140 M12 x 150 M12 x 160 M12 x 180 M12 x 200 M12 x 220 M12 x 240 M12 x 260 M12 x 280 M12 x 300 M16 x 100 M16 x 110 M16 x 150 M16 x 180 M16 x 200
17 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 24 24 24 24 24
10 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5
M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M10 x 200 M12 x 100 M12 x 130 M12 x 150 M12 x 200
13 13 13 13 17 17 17 17 17 17 17 19 19 19 19
40 35 30 24 28 24 20 20 14 12 10 14 12 10 5
M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M12 x 100 M12 x 130
13 13 13 13 17 17 17 17 17 17 19 19
4 3 3 2 3 2 2 2 2 2 2 2
Qty
Bags 08100CBB 08110CBB 08130CBB 08150CBB 1075CBB 10100CBB 10120CBB 10130CBB 10150CBB 10180CBB 10200CBB 12100CBB 12130CBB 12150CBB 12200CBB
Packs 08100CBP 08110CBP 08130CBP 08150CBP 1075CBP 10100CBP 10120CBP 10130CBP 10150CBP 10180CBP 12100CBP 12130CBP
ROOFING & CABLE TRAY BOLTS
NUTS, BOLTS, SETS & WASHERS
ROOFING BOLT & SQUARE NUT
Materials
Available in: Zinc (CR3)
Manufactured with a large flat head, making it ideal for clamping thin sheet metal, plastic and wood
Product Code
Thread x Length
Nut
(mm)
(mm)
M5 x 12 M5 x 30 M6 x 08 M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M6 x 60 M6 x 70 M6 x 80 M6 x 100 M8 x 25 M8 x 30 M8 x 40 M8 x 50 M8 x 60 M8 x 80 M8 x 100
M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8
Qty
Boxes 0512RB 0530RB 0608RB 0612RB 0616RB 0620RB 0625RB 0630RB 0635RB 0640RB 0650RB 0660RB 0670RB 0680RB 06100RB 0825RB 0830RB 0840RB 0850RB 0860RB 0880RB 08100RB
200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50
Product Code
Thread x Length
Nut
(mm)
(mm)
08120RB 08140RB 08160RB 08180RB 08200RB
M8 x 120 M8 x 140 M8 x 160 M8 x 180 M8 x 200
M8 M8 M8 M8 M8
50 50 50 50 50
M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80
M6 M6 M6 M6 M6 M6 M6 M6
150 140 130 120 110 90 80 70
M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80
M6 M6 M6 M6 M6 M6 M6 M6
14 12 10 10 8 8 6 4
Bags 0612RBB 0620RBB 0625RBB 0630RBB 0640RBB 0650RBB 0660RBB 0680RBB
Packs 0612RBP 0620RBP 0625RBP 0630RBP 0640RBP 0650RBP 0660RBP 0680RBP
CABLE TRAY BOLTS & HEX NUT Available in:
Qty
Materials
Zinc (CR3)
Specifically designed to provide a rapid and secure fixing when erecting cable trays. The combi recess or hex flange nut can be used with a power tool.
Product Code
Thread x Length
Nut
(mm)
(mm)
M6 x 12 M6 x 16 M6 x 20 M6 x 25
M6 M6 M6 M6
Qty
Boxes CTB612 CTB616 CTB620 CTB625
200 200 200 200
47 47
THREADED BAR
NUTS, BOLTS, SETS & WASHERS
THREADED BAR Available in:
Materials
Zinc (CR3)
Threaded Bar or rod has multiple industrial applications. Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Metric thread for use with standard nuts and connectors (as page 70).
Product Code
Thread x Length
Qty
(mm)
Packs 06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ
Product Code
Thread x Length
Qty
(mm)
Packs M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300
10 10 10 10 10
06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ
M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000
10 10 10 10 10 5
SETS & HEX NUTS Available in:
Product Code
Zinc (CR3)
Thread x Length
A/F
(mm)
(mm)
M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100
10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19
Qty
Product Code
130 115 100 70 60 55 45 40 30 35 32 28 25 20 16 25 23 22 20 18 14 10
616SNZP 620SNZP 625SNZP 650SNZP 820SNZP 825SNZP 840SNZP 850SNZP 870SNZP 1025SNZP 1030SNZP 1040SNZP 1050SNZP 1070SNZP 10100SNZP 1225SNZP 1230SNZP 1235SNZP 1240SNZP 1250SNZP 1270SNZP 12100SNZP
Bags 616SNZB 620SNZB 625SNZB 650SNZB 820SNZB 825SNZB 840SNZB 850SNZB 870SNZB 1025SNZB 1030SNZB 1040SNZB 1050SNZB 1070SNZB 10100SNZB 1225SNZB 1230SNZB 1235SNZB 1240SNZB 1250SNZB 1270SNZB 12100SNZB
48 48
Thread x Length
A/F
(mm)
(mm)
M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100
10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19
Qty
Packs 8 8 6 4 6 4 2 2 2 2 2 2 2 2 16 25 23 22 20 18 14 10
SETS
NUTS, BOLTS, SETS & WASHERS
SETS (DIN 933) Available in:
Zinc (CR3)
A fully threaded high tensile bolt used in a wide variety of applications.
Product Code
Thread x Length
A/F
(mm)
(mm)
M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M8 x 16 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 50 M8 x 60 M8 x 70 M8 x 80 M8 x 100 M10 x 20 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 60 M10 x 70 M10 x 75 M10 x 80 M10 x 100 M12 x 25 M12 x 30 M12 x 35
10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 19 19 19
Qty
Product Code
500 500 500 500 500 500 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 100 100 100 100 100 100 100 50 100 100 100
S1240Z S1245Z S1250Z S1260Z S1270Z S1275Z S1280Z S12100Z S12120Z S1625Z S1630Z S1635Z S1640Z S1645Z S1650Z S1655Z S1660Z S1665Z S1670Z S1675Z S1680Z S16100Z S2040Z S2045Z S2050Z S2055Z S2060Z S2065Z S2070Z S2075Z S2080Z S2090Z S20100Z
Boxes S612Z S616Z S620Z S625Z S630Z S635Z S640Z S650Z S816Z S820Z S825Z S830Z S835Z S840Z S850Z S860Z S870Z S880Z S8100Z S1020Z S1025Z S1030Z S1035Z S1040Z S1050Z S1060Z S1070Z S1075Z S1080Z S10100Z S1225Z S1230Z S1235Z
Thread x Length
A/F
(mm)
(mm)
M12 x 40 M12 x 45 M12 x 50 M12 x 60 M12 x 70 M12 x 75 M12 x 80 M12 x 100 M12 x 120 M16 x 25 M16 x 30 M16 x 35 M16 x 40 M16 x 45 M16 x 50 M16 x 55 M16 x 60 M16 x 65 M16 x 70 M16 x 75 M16 x 80 M16 x 100 M20 x 40 M20 x 45 M20 x 50 M20 x 55 M20 x 60 M20 x 65 M20 x 70 M20 x 75 M20 x 80 M20 x 90 M20 x 100
19 19 19 19 19 19 19 19 19 24 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30
Qty
Boxes 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20
49 49
NUTS
NUTS, BOLTS, SETS & WASHERS
NUTS
NYLON INSERT NUTS (TYPE P)
Available in: Zinc (CR3)
Also known as locking nuts designed to prevent the nut from loosening.
A range of metric threaded zinc nuts, includes the most popular types. Product Code
HEX FULL NUTS
Size
Height
A/F
(mm)
(mm)
(mm)
M4 M5 M6 M8 M10 M12 M16 M20
3.2 4 5 6.5 8 10 13 16
7 8 10 13 17 19 24 30
1,500 1,000 500 200 100 100 100 50
M6 M8 M10 M12 M16 M20
5 6.5 8 10 13 16
10 13 17 19 24 30
600 300 130 90 45 20
M6 M8 M10 M12 M16 M20
5 6.5 8 10 13 16
10 13 17 19 24 30
40 30 20 10 4 2
Qty
Boxes NH4Z NH5Z NH6Z NH8Z NH10Z NH12Z NH16Z NH20Z
Height
A/F
(mm)
(mm)
M6 M8 M10 M12 M16
8 9.5 11.5 14 18
10 13 17 19 24
500 200 100 100 100
M6 M8 M10 M12 M16
8 9.5 11.5 14 18
10 13 17 19 24
300 300 130 90 45
M6 M8 M10 M12 M16
8 9.5 11.5 14 18
10 13 17 19 24
20 10 4 4 2
Qty
Boxes
A traditional nut used for all bolting and fastening applications.
Product Code
Size (mm)
NP6Z NP8Z NP10Z NP12Z NP16Z
Bags NP6ZB NP8ZB NP10ZB NP12ZB NP16ZB
Packs NP6ZP NP8ZP NP10ZP NP12ZP NP16ZP
Bags 6HNUTZB 8HNUTZB 10HNUTZB 12HNUTZB 16HNUTZB 20HNUTZB
NYLON INSERT NUTS (TYPE T) An economic nut thinner than Type P, designed to prevent the nut from loosening.
Packs 6HNUTZP 8HNUTZP 10HNUTZP 12HNUTZP 16HNUTZP 20HNUTZP
HEX SERRATED FLANGE NUTS Designed to provide a larger clamping and locking force than a standard hex nut. Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
6 8 10 12 16 20
10 13 17 19 24 30
50 50
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16
6 8 10 12 16
10 13 17 19 24
Qty
Boxes NT6Z NT8Z NT10Z NT12Z NT16Z
500 200 100 100 100
HEX CONNECTOR NUT For extending the length of threaded bar.
Qty
Product Code
300 200 100 100 100 50
NC6Z NC8Z NC10Z NC12Z NC16Z NC20Z
Boxes NF6Z NF8Z NF10Z NF12Z NF16Z NF20Z
Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
18 24 30 36 48 60
10 13 17 19 24 30
Qty
Boxes 200 100 100 100 100 100
WASHERS WING NUT
NUTS, BOLTS, SETS & WASHERS
HEX DOME NUT A light duty nut used to be fastened by hand where the nut is regularly removed.
Product Code
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A
Qty
Product Code
300 200 100 100 100 50
ND6Z ND8Z ND10Z ND12Z ND16Z ND20Z
Boxes NW6Z NW8Z NW10Z NW12Z NW16Z NW20Z
Ideal for protective or aesthetic uses.
Size
Height
A/F
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
12 15 18 22 28 34
10 13 17 19 24 30
Qty
Boxes 200 100 100 100 100 100
WASHERS Available in:
Zinc (CR3)
A variety of zinc plated washers to suit multiple applications.
FORM B WASHER An economic washer thinner than a Form A, used for clamping and spacing applications.
FORM A WASHER A traditional and commonly used washer for clamping and spacing applications. Product Code
Size
Outer
Thickness
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
12 17 21 24 30 27
0.8 1 1.25 1.6 2 2
Outer Thickness (mm)
(mm)
M4 M5 M6 M8 M10 M12 M14 M16 M20 M24
9 10 12.5 17 21 24 24 30 37 44
0.8 1 1.6 1.6 2 2.5 2.5 3 3 4
1,250 1,000 500 200 100 100 100 100 100 100
M6 M8 M10 M12 M16 M20
12.5 17 21 24 30 37
1.6 1.6 2 2.5 3 3
500 350 200 130 75 50
M6 M8 M10 M12 M16 M20
12.5 17 21 24 30 37
1.6 1.6 2 2.5 3 3
60 30 20 10 8 4
Qty
WB6Z WB8Z WB10Z WB12Z WB16Z WB20Z
Packs 6WHAZP 8WHAZP 10WHAZP 12WHAZP 16WHAZP 20WHAZP
500 200 100 100 100 100
FORM C WASHER A wider diameter washer than the Form A & B used to increase the clamping area.
Bags 6WHAZB 8WHAZB 10WHAZB 12WHAZB 16WHAZB 20WHAZB
Qty
Boxes
Size (mm)
Boxes WA4Z WA5Z WA6Z WA8Z WA10Z WA12Z WA14Z WA16Z WA20Z WA24Z
Product Code
Product Code
Size
Outer Thickness
(mm)
(mm)
(mm)
M6 M8 M10 M12 M16 M20
14 21 24 28 34 39
1.6 1.6 2 2.5 3 4
Qty
Boxes WC6Z WC8Z WC10Z WC12Z WC16Z WC20Z
500 200 100 100 100 100
51 51
WASHERS
NUTS, BOLTS, SETS & WASHERS
SPRING WASHER
PENNY/REPAIR WASHER A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out.
Designed to prevent the nut from loosening.
Product Code
Size Hole x L x W x D (mm)
Qty
Boxes
Size
Outer Thickness
(mm)
(mm)
(mm)
Qty
WSP6Z
M6 x 9.9 x 3.2 x 1.6
500
Boxes
WSP8Z
M8 x 12.7 x 4 x 2
250
WP525Z
M5
25
1.5
100
WSP10Z
M10 x 16 x 5 x 2.5
200
WP525Z
M6
20
1.5
100
WSP12Z
M12 x 18 x 5 x 2.5
200
WP625Z
M6
25
1.5
100
WSP16Z
M16 x 24.4 x 7 x 3.5
100
WP630Z
M6
30
1.5
100
WP640Z
M6
40
1.5
100
WP825Z
M8
25
1.5
100
WP830Z
M8
30
1.5
100
WP840Z
M8
40
1.5
100
WP1025Z
M10
25
1.5
100
WP1030Z
M10
30
1.5
100
WP1040Z
M10
40
1.5
100
WP1240Z
M12
40
1.5
100
625WHPZB
M6
25
1.5
160
825WHPZB
M8
25
1.5
160
625WHPZP
M6
25
1.5
10
640WHPZP
M6
40
1.5
4
825WHPZP
M8
25
1.5
8
840WHPZP
M8
40
1.5
4
1040WHPZP
M10
40
1.5
4
SQUARE PLATE WASHER Designed to provide a large clamping surface and therefore spreading the load of a fastening.
Product Code
Size Hole x L x W x D (mm)
Qty
Boxes WS8405Z
M8 x 40 x 40 x 5
100
WS10403Z
M10 x 40 x 40 x 3
100
WS10405Z
M10 x 40 x 40 x 5
100
WS10503Z
M10 x 50 x 50 x 3
100
WS12503Z
M12 x 50 x 50 x 3
100
WS16503Z
M16 x 50 x 50 x 3
100
1050WHSPZB
M10 x 50 x 50 x 3
30
1250WHSPZB
M12 x 50 x 50 x 3
30
Bags Packs
52 52
Product Code
1050WHSPZP
M10 x 50 x 50 x 3
2
1250WHSPZP
M12 x 50 x 50 x 3
2
Bags Packs
FIXINGS AND FASTENERS 54 - CABLE TIES 55 - HOOKS AND EYES 56 - SANITARY FIXINGS
53
CABLE TIES
FIXINGS & FASTENERS
CABLE TIES Available in:
Nylon
An economic and convenient solution designed to bundle and secure wires, cables, hoses and more. Available in multiple colours. Manufactured from nylon with operational temperature range of -40째c to 85째c.
NATURAL CABLE TIES
Product Code
BLACK CABLE TIES
(mm)
Tensile Strength
Qty
Product Code
2.5 x 100 3.6 x 140 3.6 x 200 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530
8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40
100 100 100 100 100 100 100 100 100 100 100 100 100 100
25100CTB 36140CTB 36200CTB 48160CTB 48200CTB 48250CTB 48300CTB 48370CTB 48430CTB 76250CTB 76300CTB 76370CTB 76540CTB 90530CTB
Size
Bags 25100CTN 36140CTN 36200CTN 48160CTN 48200CTN 48250CTN 48300CTN 48370CTN 48430CTN 76250CTN 76300CTN 76370CTN 76540CTN 90530CTN
2.5 x 100 3.6 x 140 3.6 x 200 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530
8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40
100 100 100 100 100 100 100 100 100 100 100 100 100 100
Size
Tensile Strength
Qty
A simple solution for attaching a cable tie to masonry or timber.
2.5 x 100
22.20
200
Product Code
* 50 of each colour (Yellow, Green, Red & Blue)
(mm)
Drill Hole Size (mm)
Qty
8 x 40
8
100
Size
Bags 840CTP
54 54
Qty
CABLE TIE PLUGS
Bags 25100CTB
Tensile Strength
Size
Bags
COLOURED CABLE TIES*
Product Code
(mm)
HOOKS & EYES
FIXINGS & FASTENERS
HOOKS & EYES Available in:
Zinc (CR3)
PICTURE HOOK SET
SCREW HOOKS -
For hanging pictures.
A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug.
Product Code
Part
Qty
Wire Single Hook Double Hook Mixed Hooks
1 12 4 8
Packs 35BWP 2PHSP 3PHDP MPHP
ROUND CUP HOOKS
Size
Colour
(mm)
Qty
Packs 19SHBP 25SHBP 25SHWP 38SHBP 38SHWP
19 25 25 38 38
Brass Brass White Brass White
15 10 6 5 4
A light duty horizontal hook to be used into wood for hanging small items. Product Code
Size (mm)
Product Code
60 80 100
4 3 2
Zinc
Size (mm)
Qty
Packs 30SEP 40SEP 45SEP 55SEP
30 40 45 55
15 10 5 4
Zinc
There are multiple uses but commonly used to thread string or wire to train plants up fences or walls with the use of a plug.
Qty
Product Code
16 8
75VEP 100VEP
Size (mm)
Qty
Packs
Packs 25SQBP 38SQBP
Qty
A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug.
VINE EYES -
SQUARE CUP HOOKS
Size (mm)
Packs 60SHP 80SHP 100SHP
SCREW EYES -
A light duty horizontal or vertical hook to be used into wood for hanging small items such as keys. Available in a brass or white finish. Product Code
Product Code
Zinc
25 38
4.3 x 75 4.3 x 100
4 2
55 55
SANITARY FIXINGS
FIXINGS & FASTENERS
SANITARY FIXINGS For fixing bathroom fixtures
Complete fixing kits for quick and easy installation of sanitary ware including wash basins, toilets and bidets. Suitable for use with a variety of solid building materials including concrete, natural stone, brick and timber.
BASIN FIXING KITS
WC & BIDET FIXING KITS
LIGHT DUTY Product Code
Bag Contents
Item Qty
10mm Nylon Plug Washers Stud Screws M8 x 100mm Countersunk Nylon Bushes Hex Nut M8
2 2 2 2 2
Boxes LDBK
Product Code
Bag Contents
Item Qty
14mm Nylon Plug Washers Stud Screws M10 x 140mm Countersunk Nylon Bushes Hex Nut M10
2 2 2 2 2
10mm Nylon Plug Washers Countersunk Nylon Bushes PVC White Flat Cap Screws 5 x 40mm Hex Head Woodscrew 6 x 70mm
2 2 2 2 2 2
WCBK
CLOAKROOM BASIN FIXING KITS
Boxes HDBK
Item Qty
Bags
HEAVY DUTY Product Code
Bag Contents
PAN/BIDET FIXING KITS
Product Code
Bag Contents
Item Box Qty Qty
Bags CBK
Product Code
Bag Contents
Item Qty
10mm Nylon Plug Hex Woodscrew 6 x 80mm Countersunk Nylon Bushes Flat White Cap 18mm
2 2 2 2
Bags PBK
56 56
10mm Nylon Plug Washers Hex Head Screw 6 x 70mm Basin Bracket
2 2 2 2
PLASTERBOARD FIXINGS 58 - SPEED PLUGS 58 - SPRING TOGGLES 59 - METAL CAVITY ANCHORS
57
SPEED PLUGS & SPRING TOGGLES
PLASTERBOARD FIXINGS
SPEED PLUGS
Materials
Light duty applications into plasterboard. Installation Guide A rapid light duty plasterboard fixing for use in a wide range of applications. Cross-recess head, allows simple installation with a screw driver. Metal plugs come with screws.
METAL SPEED PLUGS
PLASTIC SPEED PLUGS
With screws
Product Code
Plug Length (mm)
Screw MFT Length (mm) (mm)
Qty
Product Code
300
TBAN*
Tubs TBAZST
Qty
(mm)
Boxes 31.5
30
6
Boxes TBAZS
Plug Length
42
100
*6mm pre-drilled hole may be required in harder plasterboards.
31.5
30
6
100
31.5
30
6
75
31.5
30
6
5
Bags TBAZSB
Packs TBAZSP
MFT = Max Fixture Thickness
SPRING TOGGLES
Materials
Ideal for ceiling installations Installation Guide A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. Product Code
Thread Drill Screw Ø Hole Ø Length
WFT
Qty
Boxes TOG350 TOG550 TOG575 TOG5100 TOG675
M3 M5 M5 M5 M6
11 14 14 14 18
50 50 75 100 75
30 20 45 70 45
100 100 100 100 100
M5 M5
14 14
50 75
20 45
55 50
Bags TOG550B TOG575B
WFT = Wall and Fixture Thickness
58 58
METAL CAVITY ANCHORS
PLASTERBOARD FIXINGS
METAL CAVITY ANCHORS
Materials
For a secure fixing into plasterboard Installation Guide
A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a setting tool is recommended.
Product Code
Screw ØxL
Drill Hole Ø
FCH Ø
Grip Board
Qty
M4 x 45 M4 x 50 M5 x 45 M5 x 60 M5 x 70 M6 x 60 M6 x 70
8 8 10 10 10 12 12
4 4 5 5 5 6 6
8-16 16-23 6-13 7-16 17-32 7-16 17-32
100 100 100 100 100 100 100
50037CAB M5 x 45 50052CAB M5 x 60 60065CAB M6 x 70
10 10 12
5 5 6
6-13 7-16 17-32
70 60 40
10 10
5 5
6-13 7-16
4 3
Boxes 40038CA 40045CA 50037CA 50052CA 50065CA 60052CA 60065CA
SETTING TOOL A handy and efficient tool used to set cavity anchors.
Bags
Packs 50037CAP M5 x 45 50052CAP M5 x 60
Setting Tool SETOOL
FCH = Fixture Clearance Hole
NOT SURE WHAT YOU WILL NEED?
1
CONCRETE BLOCK STONE BRICK
Multi-Purpose Drill Bit
TILE
JOB DONE!
PLASTIC
SEE PAGE
106
SHEET METAL
59 59
CONCRETE AND MASONRY FIXINGS 62 - PLASTIC PLUGS 62 - EXPRESS NAILS 63 - CEILING ANCHORS 63 - NAIL IN ANCHORS 63 - WIRE HANGER ANCHORS 64 - INSULATION FIXINGS
65 - NYLON FIXINGS 66 - MULTI-FIX SCREWS 67 - MULTI-FIX BOLTS 68 - EYES & HOOKS 68 - SHIELD ANCHORS 70 - THROUGHBOLTS
70 - DROP IN ANCHORS 71 - THREADED BAR 71 - CHEMICAL STUDS 72 - MULTI-FIX RESIN 73 - GUNS 74 - RESIN ACCESSORIES
PLASTIC PLUGS EXPRESS NAILS CEILING, NAIL IN &&WIRE HANGERS
PLASTIC PLUGS
All-purpose, cost effective fixing
CONCRETE & MASONRY FIXINGS
EXPRESS NAILS
Light duty general purpose anchor
Materials
Materials An underestimated rapid hammer-set anchor for concrete and masonry, ideal for interior timber-work such as battens and frames. Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. It may be beneficial to reduce drill diameter in soft materials.
Installation Guide
Installation Guide
2 Hammer express
nail through fixture into hole.
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 50 6 x 60 6 x 80 8 x 70 8 x 90 8 x 110 8 x 130 8 x 150 8 x 180
6 6 6 8 8 8 8 8 8
20 30 50 30 50 70 90 110 140
7 7 7 9 9 9 9 9 9
200 100 100 100 50 50 50 50 50
00660ENB 6 x 60 00680ENB 6 x 80 00890ENB 8 x 90 08110ENB 8 x 110 08150ENB 8 x 150
6 6 8 8 8
30 50 50 70 110
7 7 9 9 9
90 70 40 35 30
Product Code
Boxes Product Drill Plug Screw Code Size Length Size (mm)
Imp. Equiv.
Qty
4,5,6,7,8 6,7,8,10 8,10,12 12,14,16,18
100 100 100 40
Boxes YPLUG RPLUG BPLUG BLPLUG
5 5.5 7 10
25 30 36 48
3.0 - 4.0 3.5 - 5.0 4.5 - 6.0 6.0 - 8.0
00650EN 00660EN 00680EN 00870EN 00890EN 08110EN 08130EN 08150EN 08180EN
Bags
FOR
NYLON PLUGS SEE PAGE
24
61 61
CONCRETE & MASONRY FIXINGS
CEILING, NAIL IN & WIRE HANGER ANCHORS
CEILING ANCHORS
Materials
Ideal for brackets on suspended ceilings
A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. Made from steel making it ideal for overhead applications. Installation Guide
Product Code
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 40 6 x 65
6 6
5 30
6.5 6.5
100 100
Boxes 2 Push ceiling anchor into hole.
3 Hammer
wedge into anchor to secure.
0640CAM 0665CAM
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
NAIL IN ANCHORS
Materials
Light duty general purpose anchor
A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry.
Installation Guide
Product Code
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 30 6 x 40 6 x 50 6 x 65
6 6 6 6
5 15 25 40
6.5 6.5 6.5 6.5
100 100 100 100
Boxes 0630ZNA 0640ZNA 0650ZNA 0665ZNA
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
WIRE HANGER ANCHORS
Materials
Mainly for fixing lightweight ceilings
Specifically designed for use in the suspended ceiling industry when securing suspension wires to concrete beams.
Installation Guide
Product Code
ØxL
Drill Hole Ø
Eye Ø
Qty
6 x 60
6
6.3
100
Boxes 0660WH
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
62 62
INSULATION FIXINGS
CONCRETE & MASONRY FIXINGS
METAL INSULATION FIXINGS
Materials
Designed for fixing insulation
Designed to anchor insulation material to concrete and masonry substrate materials.
Installation Guide
Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 60 8 x 90 8 x 110 8 x 140 8 x 170 8 x 200
8 8 8 8 8 8
10 40 60 90 120 150
100 100 100 100 50 50
Bags MIF60 MIF90 MIF110 MIF140 MIF170 MIF200
MFT = Max Fixture Thickness
METAL INSULATION DISC ONLY Product Code
Head Ø
Hole Size Ø
Qty
35
5.0
100
Bags MID35
PLASTIC INSULATION FIXINGS
Materials
Designed for fixing insulation
Designed to anchor insulation material to concrete and masonry substrate materials. One piece impact resistant copolymer.
Installation Guide
Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 70 8 x 90 8 x 110 8 x 130
8 8 8 8
20-40 50-60 70-80 90-100
100 100 100 100
Bags PIF70 PIF90 PIF110 PIF130
MFT = Max Fixture Thickness
63 63
NYLON FIXINGS
CONCRETE & MASONRY FIXINGS
NYLON FIXINGS
Materials
Fixes multiple applications into masonry/brick. Installation Guide
Installation Guide
HAMMER FIXINGS
FRAME FIXINGS
A versatile and reliable fixing for attaching to brick, block, stone, masonry and concrete. Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 80 8 x 100 8 x 120 10 x 80 10 x 100 10 x 120 10 x 140 10 x 160
8 8 8 10 10 10 10 10
40 60 80 30 50 70 90 110
100 100 100 100 100 100 100 100
8 x 100 8 x 120 10 x 100 10 x 120 10 x 140 10 x 160
8 8 10 10 10 10
60 80 50 70 90 110
50 40 30 25 20 15
8 x 100 8 x 120 10 x 100 10 x 120 10 x 140 10 x 160
8 8 10 10 10 10
60 80 50 70 90 110
5 4 3 2 2 2
Boxes 08080NFF 08100NFF 08120NFF 10080NFF 10100NFF 10120NFF 10140NFF 10160NFF
Packs 08100NFFP 08120NFFP 10100NFFP 10120NFFP 10140NFFP 10160NFFP
FRAME ANCHORS
A traditional fixing for attaching doors and window frames to masonry. Product Code
ØxL
Drill Hole Ø
MFT
Qty
8 x 100 8 x 120 8 x 140 10 x 100 10 x 120 10 x 140
8 8 8 10 10 10
50 70 90 50 70 90
100 100 100 100 100 100
Boxes 08100NFA 08120NFA 08140NFA 10100NFA 10120NFA 10140NFA
64 64
Product Code
ØxL
Drill Hole Ø
MFT
Qty
5 x 30 5 x 50 6 x 40 6 x 50 6 x 60 6 x 70 6 x 80 8 x 60 8 x 80 8 x 100 8 x 120 8 x 140
5 5 6 6 6 6 6 8 8 8 8 8
5 25 15 25 35 45 55 20 40 60 80 100
200 200 200 200 200 200 200 100 100 100 100 100
6 x 40 6 x 60 6 x 80 8 x 100
6 6 6 8
15 35 55 60
135 100 80 40
6 x 40 6 x 60 6 x 80 8 x 100
6 6 6 8
15 35 55 60
10 10 10 8
Boxes
Bags 08100NFFB 08120NFFB 10100NFFB 10120NFFB 10140NFFB 10160NFFB
A light duty hammer-set through fixing for masonry.
50030HF 50050HF 60040HF 60050HF 60060HF 60070HF 60080HF 80060HF 80080HF 80100HF 80120HF 80140HF
Bags 60040HFB 60060HFB 60080HFB 80100HFB
Packs 60040HFP 60060HFP 60080HFP 80100HFP
MULTI-FIX SCREWS CONCRETE & MASONRY FIXINGS MULTI-FIX SCREW
MULTI-FIX SCREWS
Materials
Fixes into multiple materials Available in:
Installation Guide
Yellow
Zinc (CR3)
A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
CONCRETE SCREW -
CONCRETE SCREW -
Yellow
Countersunk
ØxL
Drill Hole Ø
MFT
7.5 x 40 7.5 x 50 7.5 x 60 7.5 x 70 7.5 x 80 7.5 x 90 7.5 x 100 7.5 x 110 7.5 x 120 7.5 x 130 7.5 x 150 7.5 x 180 7.5 x 200
6 6 6 6 6 6 6 6 6 6 6 6 6
10 20 30 40 30 40 50 60 70 80 100 130 150
8 8 8 8 8 8 8 8 8 8 8 8 8
100 100 100 100 100 100 100 100 100 100 100 100 100
7580MFPAN 7.5 x 80 75100MFPAN 7.5 x 100 75120MFPAN 7.5 x 120
00080TCONB 7.5 x 80 00100TCONB 7.5 x 100 00120TCONB 7.5 x 120 00200TCONB 7.5 x 200
6 6 6 6
30 50 70 150
8 8 8 8
65 55 45 30
Product Code
Product Code
FCH Qty Ø
Boxes 00040TCON 00050TCON 00060TCON 00070TCON 00080TCON 00090TCON 00100TCON 00110TCON 00120TCON 00130TCON 00150TCON 00180TCON 00200TCON
Zinc (CR3)
Pan Head
Product Code
ØxL
Drill Hole Ø
MFT
6 6 6
30 50 70
FCH Qty Ø
Boxes 8 8 8
MASONRY SCREW -
100 100 100
Zinc (CR3)
Countersunk
Bags
Packs 00080TCONP 7.5 x 80 00100TCONP 7.5 x 100 00120TCONP 7.5 x 120 00200TCONP 7.5 x 200
6 6 6 6
30 50 70 150
8 8 8 8
5 4 3 2
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
6 x 40 6 x 60 6 x 80 6 x 100
5 5 5 5
15 35 55 63
6.5 6.5 6.5 6.5
100 100 100 100
Boxes 640MFCSK 660MFCSK 680MFCSK 6100MFCSK
Cover Caps CAPW100 CAP0100 CAPM100
White Light Oak Mahogany
100 100 100
MASONRY SCREW -
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
MIXED PACK -
Yellow
Product Code
Size ØxL
Qty
Product Code
7.5 x 80 7.5 x 100 7.5 x 120 6 x 160 - SDS Drill Bit T30 TIM Driver Bit
100 100 100 1 1
640MFPAN 6 x 40 660MFPAN 6 x 60 680MFPAN 6 x 80 6100MFPAN 6 x 100
Boxed TCONPACK
Zinc (CR3)
Pan Head
Boxes
ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
5 5 5 5
15 35 55 63
6.5 6.5 6.5 6.5
100 100 100 100
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
65 65
MULTI-FIX BOLT EXPRESS MULTI-FIXNAILS BOLTS& PLASTIC PLUGS
CONCRETE & MASONRY FIXINGS
MULTI-FIX BOLT
Materials
Heavy duty non-expansion anchor Available in: Nano
Installation Guide
Product Code
This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors.
ØxL
Drill Hole Ø
MFT
FCH Ø
Box Qty
Product Code
6 x 50 6 x 75 6 x 100 6 x 130 6 x 150 8 x 60 8 x 75 8 x 100 8 x 130 8 x 150 10 x 60 10 x 75 10 x 100 10 x 130 10 x 150 12 x 75 12 x 100 12 x 130 12 x 150 12 x 200 16 x 100 16 x 150
6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 16 16
20 45 55 85 105 20 35 60 90 110 10 25 50 80 100 15 40 70 90 140 20 70
8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14 18 18
100 100 100 100 75 100 100 50 50 50 50 50 50 50 25 50 25 25 25 25 10 10
MF650B MF860B MF875B MF8100B MF1060B MF1075B MF10100B MF10150B MF1275B MF12100B MF12150B
Boxes MF650 MF675 MF6100 MF6130 MF6150 MF860 MF875 MF8100 MF8130 MF8150 MF1060 MF1075 MF10100 MF10130 MF10150 MF1275 MF12100 MF12130 MF12150 MF12200 MF16100 MF16150
ØxL
Drill Hole Ø
MFT
FCH Ø
Box Qty
6 x 50 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100 10 x 150 12 x 75 12 x 100 12 x 150
6 8 8 8 10 10 10 10 12 12 12
20 20 35 60 10 25 50 100 15 40 90
8 10 10 10 12 12 12 12 14 14 14
64 30 26 18 14 12 8 12 8 6 6
6 x 50 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100 10 x 150 12 x 75 12 x 100 12 x 150
6 8 8 8 10 10 10 10 12 12 12
20 20 35 60 10 25 50 100 15 40 90
8 10 10 10 12 12 12 12 14 14 14
25 12 10 8 15 12 10 7 8 7 5
Bags
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
Packs MF650P MF860P MF875P MF8100P MF1060P MF1075P MF10100P MF10150P MF1275P MF12100P MF12150P
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
Resin
PE • PESF • VESF See page 71 66 66
3 READY TO USE 3 USES STANDARD TOOLS 3 T-FLOW™ NOZZLE INCLUDED 3 LOW EXTRUSION FORCE 3 LESS WASTAGE 3 NO LEAKAGE 3 FASTER AND EASIER TO USE
THROUGHBOLTS & DROP IN ANCHORS CONCRETE & MASONRY FIXINGS SHIELD ANCHORS
THROUGHBOLTS
DROP IN ANCHORS
Heavy duty applications into concrete
Materials
Materials
The versatile through fixing for use in a wide range of anchoring applications into concrete.
An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete.
Installation Guide
Installation Guide
Product Code
Thread ØxL
Drill Hole Ø
MFT
FCH Ø
Box Qty
Product Code
M6 x 45 M6 x 85 M8 x 50 M8 x 65 M8 x 80 M8 x 100 M8 x 130 M10 x 65 M10 x 75 M10 x 100 M10 x 120 M12 x 80 M12 x 100 M12 x 120 M12 x 140 M12 x 180 M16 x 105 M16 x 125 M16 x 150 M16 x 175 M20 x 130 M20 x 160 M20 x 215
6 6 8 8 8 8 8 10 10 10 10 12 12 12 12 12 16 16 16 16 20 20 20
5 45 5 10 25 45 75 5 10 35 55 5 25 45 65 105 5 20 45 70 5 30 85
7 7 9 9 9 9 9 12 12 12 12 14 14 14 14 14 18 18 18 18 22 22 22
100 100 100 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 15 15 10 10 8
06WA 08WA 10WA 12WA
M8 x 50 M10 x 100 M12 x 100 M12 x 140 M12 x 180
8 10 12 12 12
5 35 25 65 105
9 12 14 14 14
40 18 12 10 8
M8 x 50 M10 x 100 M12 x 100 M12 x 140
8 10 12 12
5 35 25 65
9 12 14 14
4 2 2 2
Boxes 0645TB 0685TB 0850TB 0865TB 0880TB 08100TB 08130TB 1065TB 1075TB 10100TB 10120TB 1280TB 12100TB 12120TB 12140TB 12180TB 16105TB 16125TB 16150TB 16175TB 20130TB 20160TB 20215TB
Packs 0850TBP 10100TBP 12100TBP 12140TBP
Anchor Length
FCH Ø
Qty
25 30 40 50
8 10 12 14
100 100 50 50
Anchor Length
FCH Ø
Qty
30 30
10 12
100 50
Boxes
Bags 0850TBB 10100TBB 12100TBB 12140TBB 12180TBB
Thread Drill Ø Hole Ø
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
M6 M8 M10 M12
8 10 12 16
LIPPED
Product Code
Thread Drill Ø Hole Ø
Boxes 08LWA 1030LWA
M8 M10
10 12
SETTING TOOL
Product Code
To Fit Anchor Size
Qty
M6 M8 M10 M12
1 1 1 1
Bags 06WAS 08WAS 10WAS 12WAS
67 67
SHIELD ANCHORS CONCRETE & MASONRY FIXINGS FORGED EYES & HOOKS
SHIELD ANCHORS Available in:
Materials
Yellow
Installation Guide A traditional metal expansion anchor designed for anchoring into masonry and concrete.
LOOSE BOLTS
PROJECTING BOLTS
A three segmented expansion anchor used in concrete, brick or stone. Thread ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
M6 x 50 M6 x 65 M8 x 60 M8 x 75 M8 x 90 M10 x 70 M10 x 85 M10 x 110 M10 x 135 M12 x 90 M12 x 105 M12 x 120 M12 x 140
12 12 14 14 14 16 16 16 16 20 20 20 20
10 25 10 25 40 10 25 50 75 10 25 40 60
8 8 10 10 10 12 12 12 12 14 14 14 14
100 50 50 50 25 25 25 25 25 10 10 10 10
0610LSHB M6 x 50 0625LSHB M6 x 65 0810LSHB M8 x 60 0825LSHB M8 x 75 0840LSHB M8 x 90 1010LSHB M10 x 70 1025LSHB M10 x 85 1050LSHB M10 x 110 1075LSHB M10 x 135 1260LSHB M12 x 140
12 12 14 14 14 16 16 16 16 20
10 25 10 25 40 10 25 50 75 60
8 8 10 10 10 12 12 12 12 14
48 46 26 24 22 22 16 14 14 10
12 12 14 14 14 16 16 16 16 20
10 25 10 25 40 10 25 50 75 60
8 8 10 10 10 12 12 12 12 14
4 4 4 4 4 4 2 2 2 2
Product Code
Boxes 0610LSH 0625LSH 0810LSH 0825LSH 0840LSH 1010LSH 1025LSH 1050LSH 1075LSH 1210LSH 1225LSH 1240LSH 1260LSH
Bags
Packs 0610LSHP M6 x 50 0625LSHP M6 x 65 0810LSHP M8 x 60 0825LSHP M8 x 75 0840LSHP M8 x 90 1010LSHP M10 x 70 1025LSHP M10 x 85 1050LSHP M10 x 110 1075LSHP M10 x 135 1260LSHP M12 x 140
68 68
A three segmented expansion anchor used in concrete, brick or stone. Thread ØxL
Drill Hole Ø
MFT
FCH Ø
Qty
M6 x 110 M8 x 70 M8 x 85 M8 x 120 M10 x 85 M10 x 100 M10 x 130 M12 x 105 M12 x 120 M12 x 165
12 14 14 14 16 16 16 20 20 20
60 10 25 60 15 30 60 15 30 75
8 10 10 10 12 12 12 14 14 14
50 50 50 50 25 25 25 10 10 10
0825PSHB M8 x 85 0860PSHB M8 x 120 1015PSHB M10 x 85 1030PSHB M10 x 100 1060PSHB M10 x 130 1230PSHB M12 x 120
14 14 16 16 16 20
25 60 15 30 60 30
10 10 12 12 12 14
26 22 16 15 14 8
14 14 16 16 16 20
25 60 15 30 60 30
10 10 12 12 12 14
4 4 2 2 2 2
Product Code
Boxes 0660PSH 0810PSH 0825PSH 0860PSH 1015PSH 1030PSH 1060PSH 1215PSH 1230PSH 1275PSH
Bags
Packs 0825PSHP M8 x 85 0860PSHP M8 x 120 1015PSHP M10 x 85 1030PSHP M10 x 100 1060PSHP M10 x 130 1230PSHP M12 x 120
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
FORGED EYES & HOOKS INSULATION THROUGHBOLTS FIXINGS
CONCRETE & MASONRY FIXINGS
FORGED EYES & HOOKS Available in:
Materials
Yellow
FORGED EYES
FORGED EYES WITH SHIELDS
A useful threaded eye bolt for attaching ropes or cables.
A useful threaded eye bolt with shield for attaching ropes or cables.
Product Code
Product Code
Thread Ø
Thread Length
Eye Ø
Qty
M6 M8 M10 M12
50 60 73 95
8 10 12 16
50 50 50 25
Boxes 06EYE 08EYE 10EYE 12EYE
Thread Ø
Thread Length
Eye Ø
Qty
M6 M8
50 60
8 10
18 14
M6 M8
50 60
8 10
2 2
Bags 06EYEB 08EYEB
Packs 06EYEP 08EYEP
FORGED HOOKS
FORGED HOOKS WITH SHIELDS
A useful threaded hook bolt for attaching ropes or cables.
A useful threaded hook bolt with shield for attaching ropes or cables.
Product Code
Product Code
Thread Ø
Thread Length
Qty
M6 M8 M10 M12
50 60 73 90
50 50 50 25
Boxes 06HOOK 08HOOK 10HOOK 12HOOK
Thread Ø
Thread Length
Qty
M6 M8
50 60
20 16
06HOOKP 08HOOKP
M6 M8
50 60
2 2
Product Code
Thread Ø
Shield Length
Qty
M6 M8 M10 M12
45 50 60 75
50 50 50 25
Bags
SHIELD ONLY
06HOOKB 08HOOKB
Packs
Boxes
A three segmented expansion anchor used in concrete, brick or stone with most types of metric threaded component.
06SH 08SH 10SH 12SH
69 69
THREADED BAR & ANCHOR STUDS
CONCRETE & MASONRY FIXINGS
THREADED BAR
Used with drop in anchors Available in:
Zinc
A versatile fully threaded bar used for hanging, connecting or fixing.
1 METER LENGTHS Product Code
SHORTER LENGTHS (300mm)
Thread x Length
Product Code
Qty
(mm)
Packs
Thread x Length
Qty
(mm)
Packs
06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ
M6 x 1,000 M8 x 1,000 M10 x 1,000 M12 x 1,000 M16 x 1,000 M20 x 1,000
10 10 10 10 10 5
06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ
M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300
10 10 10 10 10
CHEMICAL ANCHOR STUDS Used with Multi-Fix resin Available in:
Zinc
Galv
External hex drive. Can be used with Multi-Fix resin. Embedment depth mark. Zinc plated and passivated (3-5 microns) or hot dipped galvanised finishes. Chisel point prevents the rod turning when tightening.
CHEMICAL ANCHOR STUDS Product Code
Thread Ø x Length
MFT
M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270
13 20 25 35 55
Zinc
Clearance Qty Hole Ø
Boxes 08110CS 10130CS 12160CS 16190CS 20270CS
70 70
CHEMICAL ANCHOR STUDS Product Code
Thread Ø x Length
MFT
M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270 M24 x 300
13 20 25 35 55 60
Galv
Clearance Qty Hole Ø
Boxes 10 12 14 18 24
10 10 10 10 4
08110CSG 10130CSG 12160CSG 16190CSG 20270CSG 24300CSG
10 12 14 18 24 28
10 10 10 10 4 3
MULTI-FIX RESIN
CONCRETE & MASONRY FIXINGS
MULTI-FIX RESIN Multi-Fix resin range offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.
Materials
VINYLESTER STYRENE FREE
VESF Fire Rated
European Technically Approved (ETA) low odour resin to be used in safety critical fixing. For enclosed, poorly ventilated, damp and wet environments. This high performance resin will give consistent results in a wide range of environments and conditions, whilst offering exceptional tensile strength.
Product Code
Approval
410ml
ETA / CE
Singles VESF410
POLYESTER STYRENE FREE RESIN
European Technically Approved (ETA) low odour resin, for day to day non-safety critical fixing. For enclosed or poorly ventilated environments.
Size
Materials
Product Code
Size
Approval
300ml
ETA / CE
Singles PESF310
(Not suitable in concrete that is or may become damp).
Materials
POLYESTER RESIN
Product Code
An economic resin ideal for day to day non-safety critical applications that are well ventilated at the time of installation.
Size
Approval
300ml 410ml
N/A N/A
Singles PE310 PE410
(Not suitable in concrete that is or may become damp).
71 71
CONCRETE & MASONRY FIXINGS
SEALANT & RESIN GUNS
SEALANT & RESIN GUNS A range of guns used with syringe type cartridge for dispensing sealants, caulk, chemical resins and adhesives.
RESIN GUN A 64mm heavy duty resin applicator gun with twin 5mm gripper plates providing four point contact with the plunger rod. There is also a non-drip mechanism. Product Code
Description
Singles RESINGUN
Chemical Resin Tool - 410ml
PROFESSIONAL GUN A 48mm heavy duty sealant and caulking gun with a convenient hook end for hanging. Ergonomically designed for ease of use and a swivel action barrel for easy application into tight corners. Patented non-drip mechanism. Product Code
Description
Singles PROGUN
Professional Gun - 310ml
SKELETON GUN A 48mm gun for dispensing sealants, caulk and adhesives from standard syringe type cartridges. It has strengthened side plates and a 6mm gripper plate with a convenient hook end for hanging. The front cap is riveted for reinforcement and the gun comes with an integrated cleaning pin. Product Code
Description
Singles SKELGUN
72 72
Skeleton Gun
RESIN ACCESSORIES
CONCRETE & MASONRY FIXINGS
RESIN ACCESSORIES The cleaning of drill holes prior to injecting resin is essential in order to ensure a safe fixing. Our range of accessories include the tools required to ensure effective hole cleaning. Nylon Sleeves assist with fixing into hollow block or brick and spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be used for subsequent applications.
MIXING NOZZLES
Product Code
BLOW-OUT PUMP
Description
Qty
Product Code
Nozzle
12
PUMP
Bags
Singles
TNOZ
PLASTIC SLEEVES
Product Code
Thread Ø x L (mm)
M8 - M10 M8 - M10
Socket Hole Ø Qty Ø x L (mm) (mm)
16 x 85 16 x 130
280
HOLE CLEANING BRUSHES
Bags 1585CPS 15130CPS
Size (mm)
16 16
100 100
Product Code
Size (mm)
Qty
13mm 15mm 22mm
10 10 10
Bags B13 B15 B22
INTERNALLY THREADED SOCKETS Zinc
Product Code
Thread Ø x L (mm)
Socket Ø x L (mm)
Hole Ø
M10 x 25
14 x 80
16
(mm)
Qty
Boxes 10ITS
50
73 73
COLLATED AND LOOSE NAILS 75 - CLIPPED HEAD NAILS 76 - BRAD NAILS 77 - FUEL CELLS 77 - POLYMER HEADED
78 - BRIGHT NAILS 81 - GALVANISED NAILS 84 - SHERARDISED NAILS 85 - ALUMINIUM NAILS
85 - COPPER NAILS 86 - COPPER DISC RIVETS 86 - COPPER STRAPS 86 - MASONRY NAILS
FIRMAHOLD CLIPPED HEAD NAILS
COLLATED & LOOSE NAILS
FIRMAHOLD CLIPPED HEAD NAILS For structural applications
To BS
Available in: Bright
FirmaGalv
FirmaGalv+
Hot Dipped
EN ISO
14592:2
008
A2/Aust. SS
Tested by
*
For use in structural applications using high quality paper collation for reduced nail jams. Various levels of rust protection to comply with building regulation and meet with all service classes.
CLIPPED HEAD - GAS 4 Product Code
Dia.
Length
Coating Type
CLIPPED HEAD - GAS 8 Shank Type
Product Code
Boxes of 3,300 & 3 Fuel Cells
Dia.
Length
Coating Type
Shank Type
Boxes of 3,300
CBRT50G
2.8
50
Bright
Ringed
CBRT50
2.8
50
Bright
Ringed
CFGT50G
2.8
50
FirmaGalv
Ringed
CFGT50
2.8
50
FirmaGalv
Ringed Ringed
CPLT50G
2.8
50
FirmaGalv +
Ringed
CPLT50
2.8
50
FirmaGalv +
CHDT50G
2.8
50
HDGV
Ringed
CBRT63
2.8
63
Bright
Ringed
CBRT63G
2.8
63
Bright
Ringed
CFGT63
2.8
63
FirmaGalv
Ringed
CFGT63G
2.8
63
FirmaGalv
Ringed
CPLT63
2.8
63
FirmaGalv +
Ringed
CPLT63G
2.8
63
FirmaGalv +
Ringed
CPLT63R
3.1
63
FirmaGalv +
Ringed
CHDT63G
2.8
63
HDGV
Ringed
CPLT63RG
3.1
63
FirmaGalv +
Ringed
Boxes of 2,200 & 2 Fuel Cells
Boxes of 2,200 CBRT75
3.1
75
Bright
Ringed
CFGT75
3.1
75
FirmaGalv
Ringed
CBRT75G
3.1
75
Bright
Ringed
CPLT75
3.1
75
FirmaGalv +
Ringed
CFGT75G
3.1
75
FirmaGalv
Ringed
CFGT85P
3.1
85
FirmaGalv
Part Ring
CPLT75G
3.1
75
FirmaGalv +
Ringed
CBRT90
3.1
90
Bright
Plain
CHDT75G
3.1
75
HDGV
Ringed
CFGT90
3.1
90
FirmaGalv
Plain
CPLT90
3.1
90
FirmaGalv +
Plain
CFGT85PG
3.1
85
FirmaGalv
Part Ring
CBRT90G
3.1
90
Bright
Plain
CFGT90G
3.1
90
FirmaGalv
Plain
CPLT90G
3.1
90
FirmaGalv +
Plain
CHDT90G
3.1
90
HDGV
Plain
CPLT90PG
3.1
90
FirmaGalv +
Part Ring
Boxes of 1,100 & 1 Fuel Cell CFGR50G
2.8
50
FirmaGalv
Ringed
CFGR63G
2.8
63
FirmaGalv
Ringed Ringed
CFGR75G
3.1
75
FirmaGalv
CFGR90G
3.1
90
FirmaGalv
Plain
CSSR50G
2.8
50
A2 SS
Ringed
CSSR63G
2.8
63
A2 SS
Ringed
Boxes of 1,100 CFGR50
2.8
50
FirmaGalv
Ringed
CFGR63
2.8
63
FirmaGalv
Ringed Ringed
CFGR75
3.1
75
FirmaGalv
CFGR90
3.1
90
FirmaGalv
Plain
CSSR50
2.8
50
A2 SS
Ringed
CSSR63
2.8
63
A2 SS
Ringed
*Notified Test Laboratory 2389 for EN 14592 Timber Structures - Dowel Type Fasteners - Requirements
75 75
FIRMAHOLD BRAD NAILS
COLLATED & LOOSE NAILS
FIRMAHOLD BRAD NAILS Perfect for indoor use Galv.
Available in:
A2/Aust. SS
Ideal for internal applications such as skirting, architrave, tongue and groove fixing, with a T head for a concealed finish. Also available in stainless steel for hardwood applications.
16 GAUGE STRAIGHT BRADS - GAS 4 Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 & 2 Fuel Cells BG1619G BG1625G BG1632G BG1638G BG1645G BG1650G BG1664G BSS1638G BSS1650G
16 16 16 16 16 16 16 16 16
19 25 32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50 50 50
16 GAUGE STRAIGHT BRADS - GAS 8 Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 BG1619 BG1625 BG1632 BG1638 BG1645 BG1650 BG1664 BSS1638 BSS1650
16 16 16 16 16 16 16 16 16
19 25 32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50 50 50
18 GAUGE STRAIGHT BRADS - GAS 8 Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 5,000 BG1816 BG1819 BG1825 BG1832 BG1838 BG1845 BG1850
76 76
18 18 18 18 18 18 18
16 19 25 32 38 45 50
Galv. Galv. Galv. Galv. Galv. Galv. Galv.
100 100 100 100 100 100 100
16 GAUGE ANGLED BRADS - GAS 4 Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 & 2 Fuel Cells ABG1632G ABG1638G ABG1645G ABG1650G ABG1664G ABSS1638G ABSS1650G
16 16 16 16 16 16 16
32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50
16 GAUGE ANGLED BRADS - GAS 8 Product Code
Gauge
Length
Coating Nails Type Per Strip
Boxes of 2,000 ABG1632 ABG1638 ABG1645 ABG1650 ABG1664 ABSS1638 ABSS1650
16 16 16 16 16 16 16
32 38 45 50 64 38 50
Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS
50 50 50 50 50 50 50
FUEL CELLS & POLYMER HEADED
COLLATED & LOOSE NAILS
FUEL CELLS
For use with framing & finishing nail guns Manufactured to European standards. Cleaned propane and butane gas for cleaner combustion and improve the working environment. Fully synthetic oil for reduced carbon deposition. High quality propellant to prevent leakage and increase shelf life. Gas filled in accordance with European Regulations (75/324/EWG). Product Code
Description
Qty
Framing Nailer Fuel Cell Finishing Nailer Fuel Cell
2 2
Packs CFC BFC
POLYMER HEADED NAILS & PINS Available in:
A2/Aust. SS
A coloured poly headed marine grade stainless steel pin or nail designed to secure fascia, soffit and window boards.
POLYMER HEADED NAILS
Product Code
Finish
POLYMER HEADED PINS
Size
Head
(mm)
(mm)
Box Qty
Product Code
40 50 50 50 50 65 65 65
12 12 12 12 12 12 12 12
100 100 100 100 100 100 100 100
PP25M PP25W PP25BEIGE PP30W PP30O PP30BR PP30BL PP40W PP40O PP40BR PP40BL
Boxes PN40W PN50W PN50O PN50BR PN50BL PN65W PN65BR PN65BL
Size
Head
(mm)
(mm)
Box Qty
25mm 25mm 25mm 30mm 30mm 30mm 30mm 40mm 40mm 40mm 40mm
6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4
250 250 250 250 250 250 250 250 250 250 250
Boxes White White Oak Mahogany Black White Mahogany Black
CLAD PINS
Product Code
Finish
Finish
Size
Head
(mm)
(mm)
Box Qty
30mm
4
250
Mahogany White Beige White Oak Mahogany Black White Oak Mahogany Black
Boxes CP30
N/A
77 77
BRIGHT LOOSE NAILS
COLLATED & LOOSE NAILS
BRIGHT LOOSE NAILS Bright loose nails covering all aspects of internal uses. Available in a wide variety of packaging options from 500g to 2.5kgs to suit any job size.
ANNULAR RINGSHANK
PANEL PINS
Annular rings provide additional holding power, where additional grip is required.
A light weight nail, commonly used for cabinet making and light duty applications.
Product Code
Product Code
For additional strength
Length (mm)
Shank Dia. (mm)
For light duty applications
Qty
Packs BAR25P BAR50P BAR65P
25 50 65
2.00 2.65 3.35
150 50 30
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
500g 500g 500g 500g 500g 500g 500g
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
1kg 1kg 1kg 1kg 1kg 1kg 1kg
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
20 25 30 40 50 65 75
2.00 2.00 2.36 2.36 2.65 3.35 3.75
25kg 25kg 25kg 25kg 25kg 25kg 25kg
500g Bags BAR20MB BAR25MB BAR30MB BAR40MB BAR50MB BAR65MB BAR75MB
1kg Bags BAR20B BAR25B BAR30B BAR40B BAR50B BAR65B BAR75B
2.5kg Bags BAR20LB BAR25LB BAR30LB BAR40LB BAR50LB BAR65LB BAR75LB
2.5kg Tubs BAR20T BAR25T BAR30T BAR40T BAR50T BAR65T BAR75T
25kg Boxes BAR20 BAR25 BAR30 BAR40 BAR50 BAR65 BAR75
78 78
(mm)
Shank Dia. (mm)
Qty
25 30 40 50
1.60 1.60 1.60 1.60
250 200 100 50
25 30 40
1.60 1.60 1.60
200g 200g 200g
25 30 40 50
1.60 1.60 1.60 1.60
500g 500g 500g 500g
25 30 40 50
1.60 1.60 1.60 1.60
1kg 1kg 1kg 1kg
25 30 40 50
1.60 1.60 1.60 1.60
2.5kg 2.5kg 2.5kg 2.5kg
25 30 40 50
1.60 1.60 1.60 1.60
2.5kg 2.5kg 2.5kg 2.5kg
25 30 40 50
1.60 1.60 1.60 1.60
25kg 25kg 25kg 25kg
Length
Packs PPB25P PPB30P PPB40P PPB50P
200g Bags BPP25P BPP30P BPP40P
500g Bags BPP25MB BPP30MB BPP40MB BPP50MB
1kg Bags BPP25B BPP30B BPP40B BPP50B
2.5kg Bags BPP25LB BPP30LB BPP40LB BPP50LB
2.5kg Tubs BPP25T BPP30T BPP40T BPP50T
25kg Boxes BPP25T BPP30T BPP40T BPP50T
BRIGHT LOOSE NAILS
COLLATED & LOOSE NAILS
ROUND WIRE
OVAL NAILS
Used where strength is essential.
Perfect for skirting and architrave. due to the flat shank which reduces splitting.
General purpose nail
Product Code
Where appearance is important
(mm)
Shank Dia. (mm)
Qty
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
500g 500g 500g 500g 500g 500g 500g
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
1kg 1kg 1kg 1kg 1kg 1kg 1kg
Length
500g Bags BRW40MB BRW50MB BRW65MB BRW75MB BRW100MB BRW125MB BRW150MB
1kg Bags BRW40B BRW50B BRW65B BRW75B BRW100B BRW125B BRW150B
2.5kg Bags BRW40LB BRW50LB BRW65LB BRW75LB BRW100LB BRW125LB BRW150LB
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100
2.65 2.65 3.35 3.75 4.50
10kg 10kg 10kg 10kg 10kg
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
25kg 25kg 25kg 25kg 25kg 25kg 25kg
2.5kg Tubs BRW40T BRW50T BRW65T BRW75T BRW100T BRW125T BRW150T
10kg Tubs BRW40LT BRW50LT BRW65LT BRW75LT BRW100LT
25kg Boxes BRW40 BRW50 BRW65 BRW75 BRW100 BRW125 BRW150
Product Code
Length (mm)
Qty
500g Bags BON40MB BON50MB BON65MB BON75MB BON100MB
40 50 65 75 100
500g 500g 500g 500g 500g
40 50 65 75 100
1kg 1kg 1kg 1kg 1kg
40 50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 75 100
25kg 25kg 25kg 25kg 25kg
1kg Bags BON40B BON50B BON65B BON75B BON100B
2.5kg Bags BON40LB BON50LB BON65LB BON75LB BON100LB
2.5kg Tubs BON40T BON50T BON65T BON75T BON100T
25kg Boxes BON40 BON50 BON65 BON75 BON100
79 79
BRIGHT LOOSE NAILS
COLLATED & LOOSE NAILS ROUND LOST HEAD
CUT FLOORING BRADS
For second fix applications, where the head can be punched below the surface for a concealed finish.
A traditional nail used for fixing floor boards.
For a concealed finish
Perfect for floor boards
Product Code
Length (mm)
Qty
500g Bags CFB50MB CFB65MB
50 65
500g 500g
50 65
1kg 1kg
50 65
2.5kg 2.5kg
50 65
2.5kg 2.5kg
50 65
25kg 25kg
1kg Bags CFB50B CFB65B
2.5kg Bags CFB50LB CFB65LB
2.5kg Tubs CFB50T CFB65T
25kg Boxes CFB50 CFB65
CUT CLASP NAILS
Product Code
(mm)
Shank Dia. (mm)
Qty
40 50 65
2.36 3.00 3.35
500g 500g 500g
40 50 65
2.36 3.00 3.35
1kg 1kg 1kg
40 50 65
2.36 3.00 3.35
2.5kg 2.5kg 2.5kg
Length
A traditional nail
500g Bags BLH40MB BLH50MB BLH65MB
1kg Bags BLH40B BLH50B BLH65B
2.5kg Bags BLH40LB BLH50LB BLH65LB
2.5kg Tubs BLH40T BLH50T BLH65T
40 50 65
2.36 3.00 3.35
2.5kg 2.5kg 2.5kg
25kg Boxes BLH40 BLH50 BLH65
40 50 65
2.36 3.00 3.35
25kg 25kg 25kg
Cut clasps nails provide a more traditional fixing into timber. Product Code
Length (mm)
Qty
500g Bags BCN50MB BCN65MB BCN75MB BCN100MB
50 65 75 100
500g 500g 500g 500g
50 65 75 100
1kg 1kg 1kg 1kg
50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100
2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100
25kg 25kg 25kg 25kg
1kg Bags BCN50B BCN65B BCN75B BCN100B
2.5kg Bags BCN50LB BCN65LB BCN75LB BCN100LB
2.5kg Tubs BCN50T BCN65T BCN75T BCN100T
25kg Boxes BCN50 BCN65 BCN75 BCN100
80 80
GALVANISED LOOSE NAILS
COLLATED & LOOSE NAILS
GALVANISED LOOSE NAILS Mechanically galvanised for external use covering a wide variety of applications. Available in a wide variety of packaging options from 500g to 10kgs to suit any job size.
SQUARE TWIST
Extra large head
For use with joist hangers
For use with all types of builders metal work, including joist hangers. Product Code
Length (mm)
Shank Dia. (mm)
Qty
500g Bags GST30MB GST40MB
30 40
3.75 3.75
500g 500g
30 40
3.75 3.75
1kg 1kg
30 40
3.75 3.75
2.5kg 2.5kg
30 40
3.75 3.75
2.5kg 2.5kg
30
3.75
10kg
30 40
3.75 3.75
25kg 25kg
Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. Product Code
(mm)
Shank Dia. (mm)
Qty
30 40 50
3.00 3.00 3.00
100 75 50
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
500g 500g 500g 500g 500g 500g
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
1kg 1kg 1kg 1kg 1kg 1kg
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
13 20
3.00 3.00
10kg 10kg
13 20 25 30 40 50
3.00 3.00 3.00 3.00 3.00 3.00
25kg 25kg 25kg 25kg 25kg 25kg
Length
Packs GEC30P GEC40P GEC50P
500g Bags
1kg Bags GST30B GST40B
2.5kg Bags GST30LB GST40LB
2.5kg Tubs GST30T GST40T
10kg Tubs GST30LT
25kg Boxes GST30 GST40
ELH CLOUT
BUILDER'S METAL WORK
GEC13MB GEC20MB GEC25MB GEC30MB GEC40MB GEC50MB
1kg Bags GEC13B GEC20B GEC25B GEC30B GEC40B GEC50B
2.5kg Bags GEC13LB GEC20LB GEC25LB GEC30LB GEC40LB GEC50LB
2.5kg Tubs • MASONRY HANGERS • TIMBER HANGERS • RESTRAINT STRAPS • BRACKETS • TRUSS CLIP • FRAME CRAMPS • FIXING BANDS • INSULATION CLIPS • WALL TIES • ARRIS RAIL BRACKET • WALLSTARTER KIT • NAIL PLATES • CONNECTORS & BRACES SEE PAGES 87-100
GEC13T GEC20T GEC25T GEC30T GEC40T GEC50T
10kg Tubs GEC13T GEC20T
25kg Boxes GEC13 GEC20 GEC25 GEC30 GEC40 GEC50
81 81
GALVANISED LOOSE NAILS
COLLATED & LOOSE NAILS CLOUT
ROUND WIRE
Perfect for roofing applications.
Used where strength is essential.
General purpose nail
Product Code
Packs
GCN30P GCN40P GCN50P GCN75P
500g Bags
GCN25MB GCN30MB GCN40MB GCN33540MB GCN50MB GCN33550MB GCN26565MB GCN65MB GCN75MB
1kg Bags
GCN25B GCN30B GCN40B GCN33540B GCN50B GCN33550B GCN26565B GCN65B GCN75B
2.5kg Bags
GCN25LB GCN30LB GCN40LB GCN33540LB GCN50LB GCN33550LB GCN26565LB GCN65LB GCN75LB
2.5kg Tubs
GCN25T GCN30T GCN40T GCN33540T GCN50T GCN33550T GCN26565T GCN65T GCN75T
10kg Tubs
GCN30LT GCN40LT
25kg Boxes
GCN25 GCN30 GCN40 GCN33540 GCN50 GCN33550 GCN26565 GCN65 GCN75
82 82
General purpose nail
(mm)
Shank Dia. (mm)
Qty
30 40 50 75
2.65 2.65 2.65 3.75
125 100 50 25
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
500g 500g 500g 500g 500g 500g 500g 500g 500g
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
30 40
2.65 2.65
10kg 10kg
25 30 40 40 50 50 65 65 75
2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75
25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg
Length
Product Code
Packs
GRW40P GRW50P GRW65P GRW75P GRW100P GRW125P GRW150P
500g Bags
GRW40MB GRW50MB GRW26565MB GRW65MB GRW75MB GRW100MB GRW125MB GRW150MB
1kg Bags
GRW40B GRW50B GRW26565B GRW65B GRW75B GRW100B GRW125B GRW150B
2.5kg Bags
GRW40LB GRW50LB GRW26565LB GRW65LB GRW75LB GRW100LB GRW125LB GRW150LB
2.5kg Tubs
GRW40T GRW50T GRW26565T GRW65T GRW75T GRW100T GRW125T GRW150T
10kg Tubs
GRW40LT GRW50LT GRW26565LT GRW65LT GRW75LT GRW100LT
25kg Boxes
GRW40T GRW50T GRW26565T GRW65T GRW75T GRW100T GRW125T GRW150T
(mm)
Shank Dia. (mm)
Qty
40 50 65 75 100 125 150
2.65 2.65 3.35 3.75 4.50 5.60 6.00
75 50 40 25 15 10 8
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
500g 500g 500g 500g 500g 500g 500g 500g
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
40 50 65 65 75 100
2.65 2.65 2.65 3.35 3.75 4.50
10kg 10kg 10kg 10kg 10kg 10kg
40 50 65 65 75 100 125 150
2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00
25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg
Length
GALVANISED LOOSE NAILS JAGGED PLASTERBOARD For fixing plasterboard
Product Code
500g Bags
JPN30MB JPN40MB
1kg Bags
JPN30B JPN40B
2.5kg Bags
JPN30LB JPN40LB
2.5kg Tubs
JPN30T JPN40T
25kg Boxes
JPN30 JPN40
Length (mm)
Traditional alternative to the drywall screw.
Shank Dia. (mm)
Qty
30 40
2.65 2.65
500g 500g
30 40
2.65 2.65
1kg 1kg
30 40
2.65 2.65
2.5kg 2.5kg
30 40
2.65 2.65
2.5kg 2.5kg
30 40
2.65 2.65
25kg 25kg
DRIVE SCREW
For roofing applications
Product Code
500g Bags
DSN50MB DSN65MB DSN75MB DSN100MB DSN125MB DSN150MB
1kg Bags
DSN50B DSN65B DSN75B DSN100B DSN125B DSN150B
2.5kg Bags
DSN50LB DSN65LB DSN75LB DSN100LB DSN125LB DSN150LB
2.5kg Tubs
DSN50T DSN65T DSN75T DSN100T DSN125T DSN150T
25kg Boxes
DSN50 DSN65 DSN75 DSN100 DSN125 DSN150
PRESSER POINT STAPLES For fencing applications
Used for fixing fencing and wire mesh. Product Code
Packs
PPS20P PPS25P PPS30P PPS40P PPS50P
500g Bags
PPS20MB PPS25MB PPS30MB PPS40MB PPS50MB
1kg Bags
PPS20B PPS25B PPS30B PPS40B PPS50B
2.5kg Bags
Fixing roofing and cladding sheets to timber purlins.
(mm)
Shank Dia. (mm)
Qty
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
500g 500g 500g 500g 500g 500g
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
1kg 1kg 1kg 1kg 1kg 1kg
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
50 65 75 100 125 150
5.40 5.40 5.40 5.40 6.40 6.40
25kg 25kg 25kg 25kg 25kg 25kg
Length
COLLATED & LOOSE NAILS
PPS20LB PPS25LB PPS30LB PPS40LB PPS50LB
2.5kg Tubs
PPS20T PPS25T PPS30T PPS40T PPS50T
25kg Boxes
PPS20 PPS25 PPS30 PPS40 PPS50
(mm)
Shank Dia. (mm)
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
75 60
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
500g 500g 500g 500g 500g
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
1kg 1kg 1kg 1kg 1kg
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
20 25 30 40 50
2.00 2.65 3.35 4.00 4.00
25kg 25kg 25kg 25kg 25kg
Length
Qty
30 20
SPRING HEAD
For fixing corrugated sheeting
Twisted shank gives a very strong purchase. Product Code
500g Bags
GSN65MB
1kg Bags
GSN65B
2.5kg Bags
GSN65LB
2.5kg Tubs
GSN65T
10kg Boxes
GSN65
(mm)
Shank Dia. (mm)
Qty
65
3.35
500g
65
3.35
1kg
65
3.35
2.5kg
65
3.35
2.5kg
65
3.35
25kg
Length
83 83
SHERARDISED LOOSE NAILS
COLLATED & LOOSE NAILS
SHERARDISED LOOSE NAILS For medium duty rust protection. Available in a wide variety of packaging options from 500g to 2.5kgs to suit any job size.
ANNULAR RINGSHANK
PANEL PINS
For additional strength
For light duty applications
Annular rings provide additional holding power, where additional grip is required.
A light weight nail, commonly used for cabinet making and light duty applications.
Product Code
Product Code
Length (mm)
Shank Dia. (mm)
Qty
500g Bags
500g Bags SAR40MB SAR50MB SAR65MB SAR75MB SAR100MB
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
500g 500g 500g 500g 500g
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
1kg 1kg 1kg 1kg 1kg
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
2.65 2.65 3.35 3.75 5.0
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
1kg Bags SAR40B SAR50B SAR65B SAR75B SAR100B
2.5kg Bags SAR40LB SAR50LB SAR65LB SAR75LB SAR100LB
2.5kg Tubs SAR40T SAR50T SAR65T SAR75T SAR100T
40 50 65 75 100
25kg Boxes SAR40 SAR50 SAR65 SAR75 SAR100
40 50 65 75 100
2.65 2.65 3.35 3.75 5.0
25kg 25kg 25kg 25kg 25kg
SPP25MB SPP30MB SPP40MB SPP50MB
1kg Bags
SPP25B SPP30B SPP40B SPP50B
25kg Boxes
SPP25 SPP30 SPP40 SPP50
Shank Dia. (mm)
Qty
25 30 40 50
1.60 1.60 1.60 2.00
500g 500g 500g 500g
25 30 40 50
1.60 1.60 1.60 2.00
1kg 1kg 1kg 1kg
25 30 40 50
1.60 1.60 1.60 2.00
25kg 25kg 25kg 25kg
SQUARE TWIST For use with joist hangers
For use with all types of builders metal work. Product Code
500g Bags
SST30MB SST40MB
1kg Bags
SST30B SST40B
2.5kg Bags
SST30LB SST40LB
2.5kg Tubs
SST30T SST40T
10kg Tubs
SST30LT SST40LT
25kg Boxes
SST30 SST40
84 84
(mm)
Length
(mm)
Shank Dia. (mm)
Qty
30 40
3.75 3.75
500g 500g
30 40
3.75 3.75
1kg 1kg
30 40
3.75 3.75
2.5kg 2.5kg
30 40
3.75 3.75
2.5kg 2.5kg
30 40
3.75 3.75
10kg 10kg
30 40
3.75 3.75
25kg 25kg
Length
ALUMINIUM & COPPER LOOSE NAILS
COLLATED & LOOSE NAILS
ALUMINIUM LOOSE NAILS
COPPER LOOSE NAILS
Manufactured using high quality aluminium. These nails are ideal for all types of roofing work including slate. Providing high levels of rust protection.
Manufactured using high quality copper. These nails and straps are ideal for all types of roofing work including slate. Providing high levels of rust protection.
CLOUT
CLOUT
Large diameter head, commonly used for tile hanging.
Large diameter head, perfect for attaching roofing felt, slate and shingles
Product Code
Product Code
For roofing applications
For roofing applications
(mm)
Shank Dia. (mm)
Qty
30 40 50 65
2.65 3.35 3.35 3.35
250kg 250kg 250kg 250kg
30 40 50 65
2.65 3.35 3.35 3.35
1kg 1kg 1kg 1kg
30 40 50 65
2.65 3.35 3.35 3.35
1kg 1kg 1kg 1kg
Length
250g Bags ACN30B ACN40B ACN50B ACN65B
1kg Tubs ACN30T ACN40T ACN50T ACN65T
Shank Dia. (mm)
Qty
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
500g 500g 500g 500g 500g 500g 500g
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
1kg 1kg 1kg 1kg 1kg 1kg 1kg
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
25 25 30 30 38 38 50
2.65 3.35 2.65 3.35 2.65 3.35 3.35
2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
500g Bags
1kg Bags ACN30LB ACN40LB ACN50LB ACN65LB
(mm)
Length
COP225MB COP325MB COP230MB COP330MB COP238MB COP338MB COP350MB
1kg Bags COP225B COP325B COP230B COP330B COP238B COP338B COP350B
2.5kg Bags COP225LB COP325LB COP230LB COP330LB COP238LB COP338LB COP350LB
2.5kg Tubs COP225T COP325T COP230T COP330T COP238T COP338T COP350T
85 85
MASONRY LOOSE NAILS
COLLATED & LOOSE NAILS COPPER DISC RIVETS
COPPER STRAPS
Large diameter head, perfect for attaching fibre cement slates
Used to prevent slate and shingles from slipping.
Product Code
Product Code
For fixing fibre cement slates
Use with copper clouts for fixing slate
(mm)
Shank Dia. (mm)
Qty
20
1.50
250
20
1.50
1,000
Length
Bags
(mm)
Dia. (mm)
Qty
150 150
13 13
10 100
Length
Bags
CDRB
Tubs CDRT
CSS150P CSS150B
MASONRY NAILS Available in:
Zinc (CR3)
FLAT HEAD
ROUND HEAD
For light to medium duty applications with a countersunk head for a concealed finish.
For heavy duty applications with a round head for additional clamping.
Product Code
Product Code
For fixing timber to masonry
For fixing timber to masonry
(mm)
Shank Dia. (mm)
Qty
25 30 35 40 50 60 65
2.5 2.5 2.5 2.5 2.5 3.0 3.0
50 50 50 50 50 50 50
25 30 35 40 50 40 50 60 65
2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
100 100 100 100 100 100 100 100 100
Length
Bags HM25025P HM25030P HM25035P HM25040P HM25050P HM30060P HM30065P
86 86
Shank Dia. (mm)
Qty
75
3.5
50
65 75 85 100
3.5 3.5 3.5 3.5
100 100 100 100
Bags
Boxes HM25025 HM25030 HM25035 HM25040 HM25050 HM30040 HM30050 HM30060 HM30065
(mm)
Length
HM35075P
Boxes HM35065 HM35075 HM35085 HM350100
BUILDERS METAL WORK 88 - MASONRY HANGERS 89 - MF HANGERS 89 - TIMBER HANGERS 90 - RESTRAINT STRAPS 93 - ANGLED BRACKETS 93 - TRUSS CLIPS
94 - FRAMING ANCHORS 94 - NAIL PLATES 95 - FRAME CRAMPS 95 - FIXING BANDS 96 - WINDOW BOARD TIES 96 - WALL TIES
96 - INSULATION CLIPS 97 - WALL STARTER KITS 97 - ARRIS RAIL BRACKETS 97 - FENCE CLIPS 98 - CONNECTORS & BRACES 100 - SHIMS & PACKERS
87
BUILDERS METAL WORK
MASONRY HANGERS
MASONRY HANGERS
For masonry to timber applications Available in:
Galv.
A2/Aust. SS
To BS
EN ISO
14592:2
008
Supports timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake out existing brickwork. Manufactured from pre-galvansied steel to give high level of corrosion resistance, for ultimate corrosion resistance use stainless steel
SINGLE PIECE -
Galv.
Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber.
WELDED -
Galv.
Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber.
Product Code
Hanger Size W x H (mm)
Joist Size W x H (mm)
Joist Bearing
47 x 100 47 x 125 47 x 140 47 x 165 47 x 190 47 x 215
47 x 100 47 x 125 47 x 150 47 x 175 47 x 200 47 x 225
80 80 80 75 75 75
Joist Size W x H (mm)
Joist Bearing
Singles 47100MH 47125MH 47147MH 47175MH 47200MH 47225MH
A2/Aust. SS
Product Code
Hanger Size W x H (mm)
Singles (Galvanised Steel) 75150WMH 75175WMH 75200WMH 75225WMH 90150WMH 90175WMH 90200WMH 90225WMH 100150WMH 100175WMH 100200WMH 100225WMH 150200WMH 150225WMH
75 x 140 75 x 165 75 x 190 75 x 215 90 x 140 90 x 165 90 x 190 90 x 215 100 x 140 100 x 165 100 x 190 100 x 215 150 x 190 150 x 215
75 x 150 75 x 175 75 x 200 75 x 225 90 x 150 90 x 175 90 x 200 90 x 225 100 x 150 100 x 175 100 x 200 100 x 225 150 x 200 150 x 225
80 80 80 80 80 80 80 80 75 75 75 75 90 90
47 x 100 47 x 150 47 x 175 47 x 200 47 x 225 100 x 150 100 x 175 100 x 200 100 x 225
80 80 80 80 80 80 80 80 80
Singles (Stainless Steel) 47100WMHS 47150WMHS 47175WMHS 47200WMHS 47225WMHS 100150WMHS 100175WMHS 100200WMHS 100225WMHS
88 88
47 x 100 47 x 140 47 x 165 47 x 190 47 x 215 100 x 140 100 x 165 100 x 190 100 x 215
MULTI-FUNCTIONAL HANGERS
BUILDERS METAL WORK
MULTI-FUNCTIONAL HANGERS For timber to timber applications Available in:
Galv.
For medium to heavy duty timber to timber applications. Designed for use with different fixings to give greater flexibility and improved performance. Overall length refers to the length of the hanger when flat.
MULTI-FUNCTIONAL HANGERS Location tabs aid fast accurate alignment of the hanger.
Product Code
Hanger Size W x H (mm)
Overall Joist Length (mm) Bearing
Singles 47240MMFH 47346MFH 47404MFH 47504MFH 76346MFH 76404MFH 76504MFH 90504MFH 100346MFH 100404MFH 100504MFH 150404MFH 150504MFH
47 x 97 47 x 150 47 x 179 47 x 229 76 x 135 76 x 164 76 x 214 90 x 207 100 x 123 100 x 152 100 x 202 150 x 127 150 x 177
240 346 404 504 346 404 504 504 346 404 504 404 504
85 85 85 85 85 85 85 85 85 85 85 85 85
MINI TIMBER HANGERS For timber to timber applications Available in:
Galv.
A2/Aust. SS
Timber to timber joist hangers, suitable for light duty applications such as ceiling joists, decking and trimmers.
MINI TIMBER HANGER Tag on base of the hanger helps avoid rotation and aids fast, accurate location. The tag can easily be bent if not required.
Product Code
Width
Leg
Joist Size
(mm)
(mm)
(mm)
Joist Bearing
Singles (Galvanised Steel) 44THM 47THM
44 47
68 67
44 x 75 to 100 47 x 75 to 100
50 50
Singles (Stainless Steel) 44THMS 47THMS
44 47
97 96
44 x 100 to 150 47 x 100 to 150
50 50
89 89
BUILDERS METAL WORK
TIMBER HANGERS
TIMBER HANGERS
For timber to timber applications Available in:
Galv.
A2/Aust. SS
For various timber to timber connections such as roof trusses, rafters and joists. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance, for ultimate corrosion resistance use stainless steel.
STANDARD -
Galv.
Increased leg lengths, all widths can take up to a 225mm deep joist.
A2/Aust. SS
Product Code
Width
Leg
Joist Size
(mm)
(mm)
(mm)
Joist Bearing
Singles (Galvanised Steel) 125TH 150TH
125 150
300 300
125 x 100 to 225 150 x 100 to 225
50 50
Singles (Stainless Steel)
NO TAG -
Galv.
Superior design allows the use of fewer nails for faster installation. Increased leg lengths, all widths can take up to 225mm deep joist.
LONG LEG -
47 76 100
Product Code
275 300 300
47 x 100 to 225 76 x 100 to 225 100 x 100 to 225
50 50 50
Width Leg
Joist Size
(mm) (mm)
(mm)
Joist Bearing
44 x 125 to 220 47 x 125 to 220 63 x 125 to 220 75 x 125 to 220 90 x 125 to 220 100 x 125 to 220
60 60 60 60 60 60
Width Leg
Joist Size
(mm) (mm)
(mm)
Joist Bearing
44 x 150 to 250 47 x 150 to 250 76 x 175 to 250 90 x 150 to 250 100 x 150 to 250 125 x 175 to 250 150 x 175 to 250
50 50 50 50 50 50 50
Singles 44TH 47TH 63TH 75TH 90TH 100TH
44 47 63 75 90 100
306 305 297 291 283 278
Galv.
Increased leg lengths, all widths can take up to a 225mm deep joist. Perfect for loft conversions where the hanger extends below the support.
90 90
47THS 76THS 100THS
Product Code
Singles 44450LTH 47450LTH 76450LTH 90450LTH 100450LTH 125450LTH 150450LTH
44 47 76 90 100 125 150
453 445 435 425 420 450 450
HEAVY RESTRAINT STRAPS
BUILDERS METAL WORK
HEAVY RESTRAINT STRAPS Joins joists & rafters to masonry Available in:
Galv.
A2/Aust. SS
To BS
EN ISO
14592:2
008
Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Manufactured from Galvanised steel, for ultimate corrosion resistance use stainless steel.
HEAVY ENGINEERED -
Galv.
Product Code
One design for both horizontal and vertical applications. Lightweight design makes it easy to handle.
BENT HEAVY DUTY -
Galv.
(mm)
(mm)
(mm)
Bend Length (mm)
36 36 36 36 36
1.4 1.4 1.4 1.4 1.4
600 800 1,000 1,200 1,500
100 100 100 100 100
Width Thickness Length
Singles 600ERS 800ERS 1000ERS 1200ERS 1600ERS
A2/Aust. SS
Usually used as a lateral restraint.
Product Code
Width Thickness Length (mm)
(mm)
(mm)
Bend Length (mm)
Singles (Galvanised Steel) 600BRSH 800BRSH 1000BRSH 1200BRSH 1500BRSH 1600BRSH
27.5 27.5 27.5 27.5 27.5 27.5
4.0 4.0 4.0 4.0 4.0 4.0
600 800 1,000 1,200 1,500 1,600
100 100 100 100 100 100
600 1,000
100 100
Singles (Stainless Steel) 1000BRSHS 27.5 1200BRSHS 27.5
FLAT HEAVY DUTY -
Galv.
Product Code
Usually used as a lateral restraint.
4.0 4.0
Width
Thickness
Length
(mm)
(mm)
(mm)
27.5
4.0
1000
Singles 1000FRSH
TWISTED HEAVY DUTY Usually used as a lateral restraint.
Galv.
Product Code
(mm)
(mm)
(mm)
Twist Length (mm)
27.5 27.5
4.0 4.0
600 1,000
100 100
Width Thickness Length
Singles 600TRSH 1000TRSH
91 91
BUILDERS METAL WORK
LIGHT RESTRAINT STRAPS
LIGHT RESTRAINT STRAPS Joins joists & rafters to masonry Available in:
Galv.
A2/Aust. SS To BS
EN ISO
14592:2
008
Light duty straps are generally for vertical applications such as holding down wallplates. (When used as a vertical restraint to hold down a wallplate, use a minimum length of 900mm) Available in galvanised steel, for ultimate corrosion resistance use stainless steel.
BENT LIGHT DUTY -
Galv.
A2/Aust. SS
Increased leg lengths, all widths can take up to a 225mm deep joist.
Product Code
Width Thickness Length (mm)
(mm)
(mm)
Bend Length (mm)
Singles (Galvanised Steel) 300BRSL 600BRSL 800BRSL 1000BRSL 1200BRSL
27.5 27.5 27.5 27.5 27.5
2.4 2.4 2.4 2.4 2.4
300 600 800 1000 1200
100 100 100 100 100
1000
100
Singles (Stainless Steel) 1000BRSLS 27.5
FLAT LIGHT DUTY -
Galv.
A2/Aust. SS
Increased leg lengths, all widths can take up to a 225mm deep joist.
Product Code
2.4
Width
Thickness
Length
(mm)
(mm)
(mm)
Singles (Galvanised Steel) 1000FRSL
27.5
2.4
1000
2.4
1000
Singles (Stainless Steel) 1000FRSLS
TWISTED LIGHT DUTY -
Galv.
Increased leg lengths, all widths can take up to a 225mm deep joist.
Product Code
(mm)
(mm)
(mm)
Twist Length (mm)
27.5
2.4
1000
100
Width Thickness Length
Singles 1000TRSL
92 92
27.5
ANGLED BRACKETS & TRUSS CLIPS
BUILDERS METAL WORK
ANGLE BRACKETS
Fixes joists & rafters together Available in:
Galv.
A2/Aust. SS
A versatile and general purpose 90â ° bracket used to strengthen timber joints. Available in galvanised steel, for ultimate corrosion resistance use stainless steel.
Heavy duty brackets with strengthening ribs on bend to give added rigidity
Product Code
Width
Leg
Thickness
(mm)
(mm)
(mm)
Singles (Galvanised Steel) 5050AB 6040AB 9090AB 15090AB 150150AB
62 62 62 62 62
50 x 50 60 x 40 90 x 90 150 x 90 150 x 150
2.4 2.4 2.4 2.4 2.4
Singles (Stainless Steel) 6040ABS 9090ABS
62 62
60 x 40 90 x 90
2.4 2.4
TRUSS CLIPS
For fixing joists, girders & rafters Available in:
Galv.
For fixing trusses, girders and rafters to wallplate. Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross. Available in galvanised steel, for ultimate corrosion resistance use stainless steel.
Installation prongs help aid location of the joist and rafters easier.
Product Code
Width
Thickness
Height
(mm)
(mm)
(mm)
47
1.0
150
Singles 47TC
93 93
BUILDERS METAL WORK
UNIVERSAL FRAMING ANCHOR & PLATES
UNIVERSAL FRAMING ANCHOR
For timber to timber applications Available in:
Galv.
An economical method of providing a strong joint for the construction of timber frames. The unique bending slot allows instant and accurate on-site bending for all 2 and 3 way ties. The reversible design is ideal for a variety of connections.
UNIVERSAL FRAMING ANCHOR
Product Code
Can be bent on site to suit all applications.
Width
Height
(mm)
(mm)
40 x 40
124
Singles UFA
NAIL PLATES
For timber to timber applications Available in:
Galv.
A2/Aust. SS To BS
EN ISO
14592:2
008
A versatile perforated plate used for connecting or repairing timber.
Strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish.
Product Code
Width
Thickness
Length
(mm)
(mm)
(mm)
Singles (Galvanised Steel) 42NP 85NP 104NP 169NP 178NP
42 85 104 169 178
1.0 1.0 1.0 1.0 1.0
178 178 154 178 338
1.0
178
Singles (Stainless Steel) 85NPS
94 94
85
FRAME CRAMPS & FIXING BANDS
BUILDERS METAL WORK
FRAME CRAMPS
For fixing frames to masonry Available in:
A2/Aust. SS
To BS
EN ISO
14592:2
008
Traditionally used for securing timber windows and door frames into masonry. They can also be used for restraining masonry to new and existing structures in non structural applications.
HEAVY DUTY FISHTAIL FRAME CRAMPS Two 6mm holes and one 8mm hole. Galvanised after manufacture for superior corrosion resistance.
SAFETY FRAME CRAMPS -
Galv.
Product Code
(mm)
(mm)
(mm)
Bend Length (mm)
100FFC 150FFC 200FFC
25 25 25
2.3 2.3 2.3
100 150 200
50 50 50
Product Code
Width
Leg
Thickness
(mm)
(mm)
(mm)
Bend Length (mm)
19 19 19
2.0 2.0 2.0
100 150 200
50 50 50
Width Thickness Length
Singles
A2/Aust. SS
Two 6mm holes and one 8mm hole. In stainless steel for maximum corrosion resistance.
Singles 100SFCS 150SFCS 200SFCS
FIXING BANDS
For fixing timber to timber Available in:
Galv.
A2/Aust. SS
A versatile perforated metal strip which can easily be cut or bent to provide a quick and reliable light weight brace suitable for suspending pipework, cables and doing general repairs. Product Code
Multiple hole sizes to add to its versatility. Four different hole sizes ( 3.75 round, M10 round, M6 and M8 Square)
Width
Length
(mm)
(mm)
Singles (Galvanised Steel) 2010FB
20
10
Singles (Stainless Steel) 2010FBS
20
10
95 95
BUILDERS METAL WORK
TIES & RETAINING CLIPS
WINDOW BOARD TIES Masonry to window board Available in:
Galv.
A simple solution to tie window boards to masonry.
Product Code
Width
Length
(mm)
(mm)
12
147
Singles WBT
WALL TIES
For timber to timber applications Available in:
A2/Aust. SS
To BS
EN ISO
14592:2
008
LIGHT DUTY TYPE 4 WALL TIES Tangle free design, perfect for masonry cavity walls in box form for domestic dwellings of up to two storeys or a maximum 10m in height.
GENERAL DUTY TYPE 2 WALL TIES Tangle free design, perfect for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys and maximum 15m in height.
Product Code
Max Cavity Width x Qty Gauge (mm) Height (m) Width (mm)
Bundles 200WT4 225WT4 250WT4
Product Code
200 x 2.3 225 x 2.3 250 x 2.3
10 10 10
50 to 75 250 76 to 100 250 101 to 125 250
Max Cavity Width x Qty Gauge (mm) Height (m) Width (mm)
Bundles 225WT2 250WT2
225 x 3 250 x 3
15 15
76 to 100 250 101 to 125 250
INSULATION RETAINING CLIPS Used with a cavity wall tie to hold insulation material against the inner wall of the cavity. Product Code
Width
Diameter
(mm)
(mm)
Universal
80
Qty
Bags IC
96 96
250
WALL STARTER KITS & ARRIS BRACKETS
BUILDERS METAL WORK
WALL STARTER KITS
Joins new walls to existing masonry Available in:
A2/Aust. SS
A stainless steel system, designed to join new walls to existing masonry, suitable for both internal and external brick or block walls.
Kit includes, x2 wall rails, x5 plugs / coach screws / washers x10 wall rail connectors
Product Code
Width
Length
(mm)
(mm)
Joist Bearing (mm)
WSS
41
1200
2400
Product Code
Width
Length
Thickness
(mm)
(mm)
(mm)
62 x 62
300
0.7
Singles
ARRIS RAIL BRACKETS For fixing fences to timber posts Available in:
Galv.
Ideal for installing and repairing fences with timber posts.
Singles 300ARS
FENCING CLIPS Available in:
Galv.
A quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry.
Product Code
Width (mm)
Singles FC44 FC51
44 51
97 97
BUILDERS METAL WORK
CONNECTORS & BRACES
CONNECTORS & BRACES
For joining and strengthening applications Available in: Zinc (CR3)
Galv.
Very versatile and multi-use products, they are commonly used in kitchen fitting, furniture repairs, carpentry, joinery. These plates may also be used in many other applications where joining or strengthening is required.
ANGLE BRACES -
Zinc (CR3)
Perfect for strengthening draws and kitchen fitting. Zinc plated steel.
CORNER BRACES -
Product Code
Size H x L x W (mm)
Thickness (mm)
Qty
19 x 19 x19
1.0
1,000
19ABRP
19 x 19 x 19
1.0
10
Product Code
Size H x L x W (mm)
Thickness (mm)
Qty
25 x 25 x 16 38 x 38 x 16 50 x 50 x 16 65 x 65 x 16 75 x 75 x 16 100 x 100 x 22
1.6 1.6 1.6 1.7 1.7 2.3
50 50 50 50 50 25
25CBRP 38CBRP 50CBRP 65CBRP 75CBRP 100CBRP
25 x 25 x 16 38 x 38 x 16 50 x 50 x 16 65 x 65 x 16 75 x 75 x 16 100 x 100 x 22
1.6 1.6 1.6 1.7 1.7 2.3
4 4 4 4 4 2
Product Code
Size L x W (mm)
Thickness (mm)
Qty
75 x 16 100 x 16
1.85 2.0
50 50
75 x 16 100 x 16
1.85 2.0
4 4
Boxes 19ABR
Packs
Zinc (CR3)
Perfect for strengthening draws and kitchen fitting. Countersunk holes for a flush finish. Zinc plated steel.
Boxes 25CBR 38CBR 50CBR 65CBR 75CBR 100CBR
Packs
MENDING PLATES Perfect for strengthening and repairing. Countersunk holes for a flush finish. Zinc plated steel.
Zinc (CR3)
Boxes 75MPL 100MPL
Packs 75MPLP 100MPLP
98 98
BUILDERS METAL WORK CORNER PLATES -
Zinc (CR3)
Product Code
Perfect for strengthening and repairing. Countersunk holes for a flush finish. Zinc plated steel.
TEE PLATES -
Size (mm)
Thickness (mm)
Qty
50 x 50 x 13 75 x 75 x16
1.5 1.5
50 50
50CPLP 75CPLP
50 x 50 x 13 75 x 75 x16
1.5 1.5
4 4
Product Code
Size (mm)
Thickness (mm)
Qty
76 x 16 x 2
2.0
25
76TPLP
76 x 16 x 2
2.0
2
Product Code
Size (mm)
Thickness (mm)
Qty
38 x 25 x 29
1.8
100
38SPLP
38 x 25 x 29
1.8
4
Product Code
Size (mm)
Type
Qty
32 38 32 38
Plain Plain Slotted Slotted
1 1 1 1
Boxes 50CPL 75CPL
Packs
Zinc (CR3)
Perfect for strengthening and repairing. Countersunk holes for a flush finish. Zinc plated steel.
Boxes 76TPL
Packs
STRETCHER PLATES -
Zinc (CR3)
Perfect for strengthening draws and kitchen fitting. Zinc plated steel.
Boxes 38SPL
Packs
MIRROR PLATES -
Brass
For mounting mirrors onto walls. Slotted and plain available.
TIMBER CONNECTORS Designed to increase the joint strength when bolting two pieces of timber together.
Packs PMP32P PMP38P SMP32P SMP38P
Galv.
Product Code
Size (mm)
(mm)
Box Qty
50
M12
100
50
M12
15
50
M12
6
Bore
Boxes TCD50
Bags TCDB
Packs TCDP
99 99
BUILDERS METAL WORK
SHIMS & PACKERS
SHIMS & PACKERS Available in:
Nylon
SHIMS -
PACKERS -
Used for easy and quick levelling of battens, dry lining systems, stud work, door and window frames.
A solution for multiple applications, used to ensure correct weight distribution of glazed units and increase security around fixing points during frame fitting.
• Polypropylene material • Resistant to weather changes • Waterproof • Bag and tub includes two sizes
Product Code
• Polypropylene material • Resistant to weather changes • Waterproof • Strong and durable
(mm)
Thickness (mm)
Colour
Qty
45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50
1 2 3 4 5 6 1 2 3 4 5 6
Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black
40 40 40 40 20 20 40 40 40 40 20 20
45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50
1 2 3 4 5 6 1 2 3 4 5 6
Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black
20 20 20 20 10 10 20 20 20 20 10 10
Size
Tubs
SHIMTUB
Product Code
100 100
Thickness Colour (mm)
Qty
Tubs
PACKERTUB
100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28
1 2 3 4 5 6
Green Black White Grey Blue Red
60 80 100 40 40 80
100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28
1 2 3 4 5 6
Green Black White Grey Blue Red
30 40 50 20 20 40
100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28
1 2 3 4 5 6
Green Black White Grey Blue Red
200 200 200 200 200 200
Bags
PACKER
Bags
SHIM
Size (mm)
Bags P1GREEN P2BLACK P3WHITE P4GREY P5BLUE P6RED
DRILLING 102 - SDS PLUS HAMMER BITS 103 - SDS PLUS STEELS 104 - SDS REBAR CUTTERS 105 - SDS MAX HAMMER BITS 105 - SDS MAX STEELS 106 - DRILL BITS
107 - TILE AND GLASS BITS 107 - DIAMOND DRILL BITS 108 - BRAD POINT BITS 108 - HEX FLAT WOOD BITS 108 - AUGER BITS 109 - HINGE CUTTERS
110 - JOBBER DRILLS 114 - BLACKSMITH DRILLS 114 - STUB DRILLS 115 - BROACHING CUTTERS 116 - COUNTERSINKS 117 - CHUCKS & KEYS
101
SDS HAMMER BITS
DRILLING
PROFESSIONAL SDS PLUS HAMMER BITS
Materials
A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
4.0 4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0
50 100 50 100 150 50 100 150 50 100 150 200 290 50 100 150 200 50 100 150 200 50 100 150 200 250 300 400 150 100 150 200 250 400 550 950 100 150 200 250 400
110 160 110 160 210 110 160 210 110 160 210 260 350 110 160 210 260 110 160 210 260 110 160 210 260 310 350 450 210 160 210 260 310 450 600 1000 160 210 260 310 450
Drill Ø
Singles AP4110 AP4160 AP5110 AP5160 AP5210 AP55110 AP55160 AP55210 AP6110 AP6160 AP6210 AP6260 AP6350 AP65110 AP65160 AP65210 AP65260 AP7110 AP7160 AP7210 AP7260 AP8110 AP8160 AP8210 AP8260 AP8310 AP8350 AP8450 AP9210 AP10160 AP10210 AP10260 AP10310 AP10450 AP10600 AP101000 AP12160 AP12210 AP12260 AP12310 AP12450
102 102
Product Code
(mm)
Working Length (mm)
Total Length (mm)
12.0 12.0 13.0 14.0 14.0 14.0 14.0 14.0 14.0 15..0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 19.0 20.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 24.0 24.0 25.0 25.0 25.0 25.0 26.0 28.0 30.0
550 950 200 100 150 200 250 400 950 182 100 150 182 232 400 550 950 150 200 228 400 400 132 228 400 550 950 180 400 550 180 400 180 400 550 950 200 400 400
600 1000 260 160 210 260 310 450 1000 260 160 210 260 310 450 600 1000 210 260 310 450 450 210 310 450 600 1000 260 450 600 260 450 260 450 600 1000 250 450 450
Drill Ø
Singles AP12600 AP121000 AP13260 AP14160 AP14210 AP14260 AP14310 AP14450 AP141000 AP15260 AP16160 AP16210 AP16260 AP16310 AP16450 AP16600 AP161000 AP18210 AP18260 AP18310 AP18450 AP19450 AP20210 AP20310 AP20450 AP20600 AP201000 AP22260 AP22450 AP22600 AP24260 AP24450 AP25260 AP25450 AP25600 AP251000 AP26250 AP428450 AP430450
TRADESMAN SDS HAMMER BITS
DRILLING
TRADESMAN SDS PLUS HAMMER BITS
Materials
A cost effective drill bit with a tungsten carbide tip to give durability and precision when used in concrete and masonry.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0
100 50 100 150 50 100 150 50 100 150 200 50 100 150 200 50 100 150 50 100 150 200 250 400 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550 150 200
160 110 160 210 110 160 210 110 160 210 260 110 160 210 260 110 160 210 110 160 210 260 310 450 160 210 260 310 450 600 160 210 260 310 450 600 160 210 260 310 450 600 160 210 250 300 450 600 200 260
Drill Ø
Singles SDS4160 SDS5110 SDS5160 SDS5210 SDS55110 SDS55160 SDS55210 SDS6110 SDS6160 SDS6210 SDS6260 SDS65110 SDS65160 SDS65210 SDS65260 SDS7110 SDS7160 SDS7210 SDS8110 SDS8160 SDS8210 SDS8260 SDS8310 SDS8450 SDS10160 SDS10210 SDS10260 SDS10310 SDS10450 SDS10600 SDS12160 SDS12210 SDS12260 SDS12310 SDS12450 SDS12600 SDS14160 SDS14210 SDS14260 SDS14310 SDS14450 SDS14600 SDS16160 SDS16210 SDS16260 SDS16310 SDS16450 SDS16600 SDS18210 SDS18260
Product Code
(mm)
Working Length (mm)
Total Length (mm)
18.0 18.0 20.0 20.0 20.0 20.0 22.0 22.0 25.0 25.0
250 400 150 250 400 550 200 400 200 400
300 450 200 300 450 600 250 450 250 450
Drill Ø
Singles SDS18310 SDS18450 SDS20210 SDS20310 SDS20450 SDS20600 SDS22260 SDS22450 SDS25260 SDS25450
SDS PLUS STEELS
POINT
TILE
SPADE/CHISEL
GOUGE
NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. CHISEL \ SPADE - Breaks up concrete and masonry. Also removes plaster or rendering. GOUGE - Removes mortar from brickwork prior to re-pointing. TILE - Angled head design for easy removal of tiles, plaster or rendering. Product Code
Description
(mm)
Total Length (mm)
N/A 20 40 22 40
250 250 250 250 250
Width
Singles SDSP SDSC SDSS SDSG SDST
Point Chisel Spade Gouge Tile
103 103
REBAR CUTTERS
DRILLING
SDS SHANK REBAR CUTTERS
Materials
Used to drill through in-situ rebar when drilling in concrete. USE ROTARY MODE ONLY.
Rotary rebar cutters are designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M’S.
SHANK REBAR CUTTER
HEAD ONLY
Used to drill through in-situ rebar when drilling in concrete. USE ROTARY MODE ONLY.
Used with rebar adaptor to drill through in-situ rebar when drilling in concrete. USE ROTARY MODE ONLY.
How to Guide
Product Code Product Code
(mm)
Working Length (mm)
Total Length (mm)
10.0 12.0 14.0 15.0 16.0 18.0 20.0
250 250 250 250 250 250 250
300 300 300 300 300 300 300
Drill Ø
Singles MSRB10* MSRB12* MSRB14* MSRB15* MSRB16 MSRB18 MSRB20
* Products are not vented.
(mm)
Working Length (mm)
Total Length (mm)
22.0 24.0 25.0 26.0 30.0
110 110 110 110 110
260 260 260 260 260
Drill Ø
Singles MRB22HO MRB24HO MRB25HO MRB26HO MRB30HO
ADAPTOR FOR CUTTER HEADS Used with 22mm and above rebar cutter heads. Use rotary mode only.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
-
220
260
Drill Ø
Singles STDS212
104 104
SDS MAX
DRILLING
SDS MAX HAMMER BITS
Materials
SDS Max is an alternative system to the SDS Plus. Used mainly to drill dense materials or where there is heavy usage. Product Code
(mm)
Working Length (mm)
Total Length (mm)
Product Code
12 12 14 14 16 16 18 18 18 18 20 20 20 20 22 22
195 395 195 395 195 395 195 395 545 775 195 395 545 775 195 395
340 540 340 540 340 540 340 540 690 920 340 540 690 920 340 540
M22690 M22920 M24340 M24540 M25340 M25540 M25690 M25920 M26340 M26540 M28340 M28540 M30340 M30540 M32340 M32540
Drill Ø
Singles M12340 M12540 M14340 M14540 M16340 M16540 M18340 M18540 M18690 M18920 M20340 M20540 M20690 M20920 M22340 M22540
(mm)
Working Length (mm)
Total Length (mm)
22 22 24 24 25 25 25 25 26 26 28 28 30 30 32 32
545 775 195 395 195 395 545 775 195 395 195 395 195 395 195 395
690 920 340 540 340 540 690 920 340 540 340 540 340 540 340 540
Drill Ø
Singles
SDS MAX STEELS
Materials
A range of tools designed for use in rotation stop hammers with the larger SDS Max tool holder system. NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. CHISEL - Breaks up concrete and masonry, removes plaster or rendering. SLOTTING TOOL - Removes mortar from brickwork prior to re-pointing.
Product Code
Description
Width
POINT
CHISEL
SLOTTING
Total
(mm) Length (mm)
Singles SDSMP280 Point N/A SDSMP400 Point N/A SDSMC280 Chisel 25 SDSMC400 Chisel 25 SDSMC40050 Wide Chisel 50 SDSMC30075 Extra Wide Chisel 75 SDSMST Slotting Tool 25
280 400 280 400 400 300 280
105 105
DRILL BITS
DRILLING
TCT MULTI-PURPOSE DRILL BITS
Materials
Designed to drill steel, wood, masonry, PVCu, ceramics and concrete. Diamond-ground cutting edges allow fast drilling even in hard materials. USE ON ROTARY ONLY.
Product Code
(mm)
Working Length (mm)
Total Length (mm)
Product Code
5.0 5.0 5.5 5.5 6.0 6.0
55 87 58 87 58 87
85 150 100 150 100 150
MP65100 MP65150 MP7100 MP7150 MP8150 MP10150
Drill Ø
Singles MP585 MP5150 MP55100 MP55150 MP6100 MP6150
(mm)
Working Length (mm)
Total Length (mm)
6.5 6.5 7.0 7.0 8.0 10.0
58 87 58 87 87 87
100 150 100 150 150 150
Drill Ø
Singles
MASONRY DRILL BITS
Materials
A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action. Product Code
(mm)
Working Length (mm)
Total Length (mm)
4.0 4.0 5.0 5.0 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0
40 87 47 87 47 87 58 87 120 220 58 87 120 220 58 87 220 75 87 120
75 150 85 150 85 150 100 150 200 300 100 150 200 300 100 150 300 120 150 200
Drill Ø
Singles APM475 APM4150 APM585 APM5150 APM5585 APM55150 APM6100 APM6150 APM6200 APM6300 APM65100 APM65150 APM65200 APM65300 APM7100 APM7150 APM7300 APM8120 APM8150 APM8200
106 106
Product Code
(mm)
Working Length (mm)
Total Length (mm)
8.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 20.0 20.0 25.0
220 75 87 120 220 300 90 127 220 300 90 127 300 90 127 220 300 152 300 300
300 120 150 200 300 400 150 200 300 400 150 200 400 150 200 300 400 200 400 400
Drill Ø
Singles APM8300 APM10120 APM10150 APM10200 APM10300 APM10400 APM12150 APM12200 APM12300 APM12400 APM14150 APM14200 APM14400 APM16150 APM16200 APM16300 APM16400 APM20200 APM20400 APM25400
TILE & GLASS BITS
DRILLING
TCT TILE & GLASS BITS
Materials
For accurate drilling of glass and ceramics. USE AT LOW R.P.M IN ROTARY MODE ONLY. Product Code
(mm)
Working Length (mm)
5.0 6.0 6.5 7.0 8.0 10.0
60 60 75 75 75 80
Drill Ø
Singles TG5 TG6 TG65 TG7 TG8 TG10
DIAMOND DRILL BITS
Materials
DRY
WET
Ideal for drilling a clean hole into hard materials such as ceramics, porcelain, marble and slate.
Used to drill an accurate hole into hard materials such as ceramics, porcelain, marble and slate. Use wet.
Product Code
(mm)
Working Length (mm)
Product Code
5 6 7 8 10 12 15 20 25
65 65 80 80 80 80 80 80 80
DD5 DD6 DD7 DD8 DD10 DD12 DD15 DD20 DD25 DD115
Drill Ø
Singles VBD5 VBD6 VBD7 VBD8 VBD10 VBD12 VBD15 VBD20 VBD25
(mm)
Working Length (mm)
5 6 7 8 10 12 15 20 25 115
65 65 65 65 65 65 65 65 65 65
Drill Ø
Singles
DRILLING GUIDES WATER PUMP
UGS
UGL Product Code UGS UGL
Description Guide 5-12mm Guide 15-115mm
A hand-held water pump to aid drilling hard materials in conjunction with diamond drill bits. Product Code
Description
CS
Water Pump
107 107
BRAD POINT & HEX SHANK BITS
DRILLING
HSS BRAD POINT WOOD BITS
Materials
For drilling small diameter holes into various types of timber and man-made boards. Product Code
(mm)
Working Length (mm)
Total Length (mm)
3.0 4.0 5.0 6.0 7.0 8.0 10.0 11.0 12.0 14.0 16.0 20.0
33 43 52 57 69 75 87 89 96 100 120 140
60 75 87 92 108 118 133 142 150 160 175 200
Drill Ø
Singles BP3 BP4 BP5 BP6 BP7 BP8 BP10 BP11 BP12 BP14 BP16 BP20
HEXAGONAL SHANK FLAT WOOD BITS
Materials
The twin cutting edged and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Product Code
(mm)
Total Length (mm)
6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0 25.0 26.0 28.0 30.0 32.0 35.0 38.0
152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152
Drill Ø
FLAT BIT EXTENSION RODS
Singles FB6 FB8 FB10 FB12 FB13 FB14 FB16 FB18 FB19 FB20 FB22 FB24 FB25 FB26 FB28 FB30 FB32 FB35 FB38
108 108
1/4” extension rods to be used where there is restrictive access and in conjunction with a ¼” shank Flat Wood Bit, (Allen key provided). Product Code FBEQR150 FBEQR300
Drill Ø
Length
6.35 Q/R 6.35 Q/R
150 300
AUGER BITS & HINGE CUTTERS
DRILLING
WOOD AUGER BITS
Materials
A high performance wood drill for drilling a deep hole into various types of timber. Available with a hex or SDS Plus shank.
HEX SHANK Product Code
Product Code
(mm)
Working Length (mm)
Total Length (mm)
10.0 12.0 14.0 16.0 20.0 22.0 25.0 32.0 8.0 14.0 16.0 19.0 20.0 22.0 25.0 28.0 30.0 32.0 6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0
55 55 55 55 55 55 55 55 90 90 90 90 90 90 90 90 90 90 165 165 165 165 165 165 165 165 165 165 165
100 100 100 100 100 100 100 100 155 155 155 155 155 155 155 155 155 155 235 235 235 235 235 235 235 235 235 235 235
Drill Ø
Singles HA10100 HA12100 HA14100 HA16100 HA20100 HA22100 HA25100 HA32100 HA8155 HA14155 HA16155 HA19155 HA20155 HA22155 HA25155 HA28155 HA30155 HA32155 HA6235 HA8235 HA10235 HA12235 HA13235 HA14235 HA16235 HA18235 HA19235 HA20235 HA22235
(mm)
Working Length (mm)
Total Length (mm)
24.0 25.0 26.0 28.0 30.0 32.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 26.0
165 165 165 165 165 165 385 385 385 385 385 385 385 385 385
235 235 235 235 235 235 460 460 460 460 460 460 460 460 460
(mm)
Working Length (mm)
Total Length (mm)
6.0 8.0 10.0 12.0 16.0 20.0 22.0 25.0
100 100 160 160 160 160 160 160
200 200 235 235 235 235 235 235
Overall Length (mm)
Shank Ø
(mm)
35
60
12.7
Drill Ø
Singles HA24235 HA25235 HA26235 HA28235 HA30235 HA32235 HA8460 HA10460 HA12460 HA14460 HA16460 HA18460 HA20460 HA22460 HA26460
SDS PLUS Product Code
Drill Ø
Singles SA6200 SA8200 SA10235 SA12235 SA16235 SA20235 SA22235 SA25235
TCT HINGE CUTTERS
Materials
Superb quality, heavy duty tungsten carbide-tipped hinge drill with centre point and outer spurs. Designed to drill 35mm holes for concealed hinges. Product Code
Drill Ø
(mm)
Singles 35HC
109 109
HSS JOBBER DRILLS
DRILLING
COBALT JOBBER DRILLS
Materials
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point eradicates the need to pre-drill and prevents the bit from drifting.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Packs HSSCO1 HSSCO15 HSSCO2 HSSCO25 HSSCO3 HSSCO32 HSSCO33 HSSCO35 HSSCO4 HSSCO42 HSSCO45 HSSCO48 HSSCO5 HSSCO55 HSSCO6 HSSCO65 HSSCO68 HSSCO7 HSSCO75 HSSCO8 HSSCO85 HSSCO9 HSSCO95 HSSCO100 HSSCO102 HSSCO105 HSSCO110 HSSCO115 HSSCO120 HSSCO125 HSSCO130
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles 1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101
34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5
HSSCOR1 HSSCOR15 HSSCOR2 HSSCOR25 HSSCOR3 HSSCOR32 HSSCOR33 HSSCOR35 HSSCOR4 HSSCOR42 HSSCOR45 HSSCOR48 HSSCOR5 HSSCOR55 HSSCOR6 HSSCOR65 HSSCOR7 HSSCOR75 HSSCOR8 HSSCOR85 HSSCOR9 HSSCOR95 HSSCOR100 HSSCOR105 HSSCOR110 HSSCOR115 HSSCOR120 HSSCOR125 HSSCOR130
1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101
34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
COBALT JOBBER DRILL SET Available in 19 or 25 piece sets
Product Code HSSCO19DS HSSCO25DS
110 110
Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)
HSS JOBBER DRILLS
DRILLING
M2 JOBBER DRILLS
Materials
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point eradicates the need to pre-drill and prevents the bit from drifting. Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Packs HSSG1 HSSG15 HSSG2 HSSG24 HSSG25 HSSG3 HSSG31 HSSG32 HSSG33 HSSG35 HSSG36 HSSG38 HSSG4 HSSG41 HSSG42 HSSG45 HSSG48 HSSG49 HSSG5 HSSG51 HSSG53 HSSG55 HSSG6 HSSG64 HSSG65 HSSG68 HSSG7 HSSG75 HSSG8 HSSG85 HSSG9 HSSG95 HSSG100 HSSG102 HSSG105 HSSG110 HSSG115 HSSG120 HSSG125 HSSG130
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles 1.0 1.5 2.0 2.4 2.5 3.0 3.1 3.2 3.3 3.5 3.6 3.8 4.0 4.1 4.2 4.5 4.8 4.9 5.0 5.1 5.3 5.5 6.0 6.4 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 30 33 36 36 36 39 39 43 43 43 43 47 52 52 52 52 52 57 57 63 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101
34 40 49 57 57 61 65 65 65 70 70 75 75 75 75 80 86 86 86 86 86 93 93 101 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
24 30 33 39 43 47 52 57 57 63 69
49 57 61 70 75 80 86 93 93 101 109
1 1 1 1 1 1 1 1 1 1 1
Singles HSSGR2 HSSGR25 HSSGR3 HSSGR35 HSSGR4 HSSGR45 HSSGR5 HSSGR55 HSSGR6 HSSGR65 HSSGR7
Product Code
HSSGR8 HSSGR85 HSSGR9 HSSGR100 HSSGR110 HSSGR120 HSSGR130
8.0 8.5 9.0 10.0 11.0 12.0 13.0
75 75 81 87 94 101 101
117 117 125 133 142 151 151
1 1 1 1 1 1 1
Flute
Total
Pack
IMPERIAL Product Code
Drill Ø
(Imp.) Length (Imp.) Length (Imp.) Qty
Packs HSIG116 HSIG564 HSIG332 HSIG764 HSIG18 HSIG964 HSIG532 HSIG316 HSIG1364 HSIG732 HSIG14 HSIG516 HSIG2164 HSIG38 HSIG12
1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 13/64 7/32 1/4 5/16 21/64 3/8 1/2
7/8 1 11/4 11/2 15/8 13/4 2 25/16 27/16 21/2 23/4 33/16 35/16 35/8 41/2
17/8 2 21/4 25/8 23/4 27/8 21/8 31/2 35/8 33/4 4 4.1/2 45/8 5 6
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
M2 JOBBER DRILL SET Available in 19 or 25 piece sets
Product Code HSSG19DS HSSG25DS
Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)
111 111
HSS JOBBER DRILLS
DRILLING
ROLL FORGED JOBBER DRILLS
Materials
An economic HSS drill used for drilling all non-alloy materials. The 135° split point eradicates the need to pre-drill and prevents the bit from drifting.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Packs HSSR1 HSSR15 HSSR2 HSSR25 HSSR3 HSSR32 HSSR33 HSSR35 HSSR36 HSSR4 HSSR42 HSSR45 HSSR48 HSSR49 HSSR5 HSSR52 HSSR55 HSSR6 HSSR65 HSSR68 HSSR7 HSSR72 HSSR75 HSSR8 HSSR85 HSSR9 HSSR95 HSSR96 HSSR100 HSSR102 HSSR105 HSSR110 HSSR115 HSSR120 HSSR125 HSSR130
112 112
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles 1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 3.6 4.0 4.2 4.5 4.8 4.9 5.0 5.2 5.5 6.0 6.5 6.8 7.0 7.2 7.5 8.0 8.5 9.0 9.5 9.6 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0
12 18 24 30 33 36 36 39 39 43 43 47 52 52 52 52 57 57 63 69 69 69 69 75 75 81 81 87 87 87 87 94 94 101 101 101
34 40 49 57 61 65 65 70 70 75 75 80 86 86 86 86 93 93 101 109 109 109 109 109 109 125 125 133 133 133 133 142 142 151 151 151
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
1.0 1.5 2.0 2.5 3.0 3.3 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0
12 18 24 30 33 36 39 43 47 52 57 57 63 69 75
34 40 49 57 61 65 70 75 80 86 93 93 101 109 109
2 2 2 2 2 2 2 2 2 2 2 2 1 1 1
Singles HSSRR1 HSSRR15 HSSRR2 HSSRR25 HSSRR3 HSSRR33 HSSRR35 HSSRR4 HSSRR45 HSSRR5 HSSRR55 HSSRR6 HSSRR65 HSSRR7 HSSRR8
Product Code
HSSRR85 HSSRR9 HSSRR100 HSSRR110 HSSRR120 HSSRR130
8.5 9.0 10.0 11.0 12.0 13.0
75 81 87 94 101 101
117 125 133 142 151 151
1 1 1 1 1 1
Flute
Total
Pack
IMPERIAL Product Code
Drill Ø
(Imp.) Length (Imp.) Length (Imp.) Qty
Packs HSIR116 HSIR564 HSIR332 HSIR764 HSIR18 HSIR964 HSIR532 HSIR1164 HSIR316 HSIR732 HSIR14 HSIR1764 HSIR516 HSIR38 HSIR2964 HSIR12
1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 7/32 1/4 17/64 5/16 3/8 29/64 1/2
7/8 1 11/4 11/2 15/8 13/4 2 21/8 25/16 21/2 23/4 27/8 33/16 35/8 43/16 41/2
17/8 2 21/4 25/8 23/4 27/8 31/8 31/4 31/2 33/4 4 41/8 41/2 5 55/8 6
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
ROLL FORGED JOBBER DRILL SET Available in 19, 25 or 170 piece sets
Product Code HSSR19DS HSSR25DS HSSR170DS
Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm) 170pcs. x10pcs.1-8mm (increments of 0.5mm) x5pcs. 8.5-10mm (increments of 0.5mm)
HSS JOBBER DRILLS
DRILLING
M2 LONG JOBBER DRILLS
Materials
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above eradicates the need to pre-drill/centre punch. Prevents ‘walking’ and enables faster penetration. Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Packs
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles
HSSGL2 HSSGL25 HSSGL3 HSSGL32 HSSGL35 HSSGL4 HSSGL42 HSSGL45 HSSGL48 HSSGL5 HSSGL55 HSSGL6 HSSGL65 HSSGL7 HSSGL8 HSSGL85 HSSGL9 HSSGL100
2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 8.0 8.5 9.0 10.0
56 62 66 69 73 78 78 82 87 87 91 91 97 102 109 109 115 121
85 95 100 106 112 119 119 126 132 132 139 139 148 156 165 165 175 184
10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5
HSSGLR3 HSSGLR35 HSSGLR4 HSSGLR45 HSSGLR5 HSSGLR55 HSSGLR6 HSSGLR65 HSSGLR7 HSSGLR8
3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0
66 73 78 82 87 91 91 97 102 109
100 112 119 126 132 139 139 148 156 165
1 1 1 1 1 1 1 1 1 1
Driver Bits & Adaptors IMPACT BITS POZI PHILLIPS
TIMDRIVE SLOTTED SQUARE
HEX NUT SETTERS
MAGNETIC ADAPTORS
SEE PAGES
135-138
113 113
BLACKSMITH & STUB DRILLS
DRILLING
BLACKSMITHS DRILLS
Materials
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance when drilling larger diameter holes into all non-alloy materials. Can be used in a 1/2” chuck.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Singles BS135 BS14 BS145 BS15 BS155 BS16 BS165 BS17 BS175 BS18 BS185 BS19 BS195 BS20 BS22 BS24 BS25
13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 22.0 24.0 25.0
75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
STUB DRILLS
Materials
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point eradicates the need to pre-drill and prevents the bit from drifting. Mainly used for drilling sheet metal.
Product Code
Drill Ø
Flute
Total
Pack
(mm) Length (mm) Length (mm) Qty
Packs HSSGS32 HSSGS33 HSSGS4 HSSGS41 HSSGS42 HSSGS49 HSSGS5 HSSGS51
114 114
3.2 3.3 4.0 4.1 4.2 4.9 5.0 5.1
18 18 22 22 22 26 26 26
49 49 55 55 55 62 62 62
10 10 10 10 10 10 10 10
BROACHING CUTTERS
DRILLING
BROACHING CUTTERS
Materials
Manufactured from a high grade M2 tool steel for drilling heavy gauge non-alloy materials with a magnetic Drills. Long Reach Cutter cutting depth 50mm, Short Reach 30mm. Provided pilot rod must be used to prevent drifting.
50mm LONG REACH
30mm SHORT REACH Product Code
Cutter Ø
Cutter Depth
(mm)
(mm)
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 36 38 39 40 50
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
Singles BCS12 BCS13 BCS14 BCS15 BCS16 BCS17 BCS18 BCS19 BCS20 BCS21 BCS22 BCS23 BCS24 BCS25 BCS26 BCS27 BCS28 BCS29 BCS30 BCS31 BCS32 BCS33 BCS35 BCS36 BCS38 BCS39 BCS40 BCS50
Product Code
Cutter Ø
Cutter Depth
(mm)
(mm)
12 13 14 15 16 17 18 20 21 22 24 26 28 30 32 39
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Cutter Ø
Cutter Depth
(mm)
(mm)
12 13
50 50
Singles BCL12 BCL13 BCL14 BCL15 BCL16 BCL17 BCL18 BCL20 BCL21 BCL22 BCL24 BCL26 BCL28 BCL30 BCL32 BCL39
REPLACEMENT PILOT PINS Product Code
Singles A pilot pin used with broaching cutters in order to centre the bit when drilling.
BCL12 BCL13
115 115
HSS COUNTERSINKS
DRILLING
COUNTERSINKS
Materials
DE-BURRING COUNTERSINKS
3 FLUTE COUNTERSINKS
A single flute countersink designed for general purpose countersinking, chamfering or de-burring in alloy and non alloy metals, timber and man-made boards
These engineering quality countersinks drill a precise recess to allow a fastener head to sit flush in alloy and non alloy metals, timber and man-made boards.
Product Code
Product Code
Ø (mm)
Singles CS25 CS510 CS1015 CS1520
Ø
Screw Ø
Screw Ø
(mm)
(mm)
(imp.)
6.3 8.3 10.4 12.4 16.5 20.5 25.0
3.0 3.5-4.0 4.5-5.0 6.0 8.0 -
4-5 6-8 10 12 16 -
Singles 2 to 5 5 to 10 10 to 15 15 to 20
CS63 CS83 CS104 CS124 CS165 CS205 CS250
CONE CUTTERS & STEP DRILLS
CONE CUTTERS
STEP DRILLS
For drilling, enlarging and de-burring holes in thin sheet metal up to a thickness of 2mm
Ideal for drilling, enlarging or de-burring a precise hole into thin materials such as alloy and non alloy metals up to a thickness of 4mm.
Product Code
Product Code
Ø (mm)
Singles CC314 CC520 CC531 CC1631
116 116
Materials
Ø (mm)
Singles 3 to 14 5 to 20 5 to 31 16 to 31
SD412 SD420 SD430 SD439
4,5,6,7,8,9,10,11,12 4,6,8,10,12,14,16,18,20 4,6,8,10,12,15,18,20,22,24,26,28,30 4,6,8,10,12,21,25,27,30,33,36,39
CHUCKS, KEYS & ADAPTOR SETS
DRILLING
CHUCKS, KEYS & ADAPTOR SETS 3/8” CHUCK & KEY SETS
1/2” KEYLESS CHUCK & SDS SETS
A traditional keyed chuck that fits drills with 3/8” shaft, sold with a key. Suitable for 1.5mm – 10mm drills bits.
Product Code
Product Code
Capacity (mm)
Sets C10
A keyless hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Sold with an SDS plus adaptor. Suitable for 1.5mm – 13mm drills bits.
(mm)
Sets 1.5 - 10mm, 3/8” x 24F
1/2” CHUCK, KEY & SDS SETS
KKEY
A keyless hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits.
* SDS plus adaptor only with KEY
Product Code
Capacity (mm)
Sets
2.0 - 13mm, 1/2” x 20F
HEAVY DUTY KEYLESS CHUCK
A traditional keyed chuck that fits drills with ½” shaft, sold with a key. Suitable for 1.5mm – 13mm drills bits.
C13 KEY*
Capacity
Product Code
Capacity (mm)
Singles 1.5 - 13mm, 1/2” x 20F 1.5 - 13mm, 1/2” x 20F
CHUCK KEYS
HDKC13
2.0 - 13mm, 1/2” x 20F
SDS PLUS ADAPTORS
A replacement key for the traditional ½” keyed chuck. Product Code
Capacity (mm/mount)
Product Code
To fit 1/2” keyed chuck
SDSCA
Singles AS2
Capacity (mm/mount)
Singles SDS plus to 1/2” x 20M
Chucks continue on next page...
117 117
CHUCKS
DRILLING
SUPER HEAVY DUTY CHUCK
SINGLE HANDED KEYLESS CHUCK
A keyless heavy duty handtightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 1000 watt. Suitable for 1.5mm – 13mm drills bits.
Product Code
(mm)
Product Code
2.0 - 13mm, 1/2” x 20F
SHKC13
Capacity
Singles SHDKC
Capacity (mm)
Singles
THE COMPLETE
PROFESSIONAL ANCHOR RANGE See page 65-66
118 118
A keyless single hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits.
2.0 - 13mm, 1/2” x 20F
CUTTING 120 - HOLESAWS 121 - HOLESAW ACCESSORIES 122 - DRY DIAMOND CORE BITS 122 - DIAMOND CORE KIT 123 - DIAMOND CORE ACCESSORIES 124 - DIAMOND BLADES 126 - CERAMIC BLADES
126 - MORTAR RAKING BLADES 127 - CUP GRINDING WHEELS 127 - BONDED ABRASIVE DISCS 128 - JIGSAW BLADES 130 - RECIPROCATING SAW BLADES 131 - HACKSAW BLADES 132 - CIRCULAR SAW BLADES
119
HOLESAWS
CUTTING
HOLESAWS - VARIABLE PITCH Available in:
Materials
Steel Variable Pitch
A variable pitch tooth pattern which clears dust more efficiently and gives superior cutting performance in wood, plastic, non-ferrous metals and man-made boards. High quality M3 grade HSS steel cutting edge and compatible with most makes of arbor.
Product Code
Threaded Saw Ø (mm) Mount (inch)
Product Code
Arbor to Suit
Singles HS14 HS16 HS17 HS19 HS20 HS21 HS22 HS24 HS25 HS27 HS29 HS30 HS32 HS35 HS37 HS38 HS40 HS41 HS43 HS44 HS46 HS48 HS51 HS52 HS54
Threaded Saw Ø (mm) Mount (inch)
Arbor to Suit
Singles 14.0 16.0 17.0 19.0 20.0 21.0 22.0 24.0 25.0 27.0 29.0 30.0 32.0 35.0 37.0 38.0 40.0 41.0 43.0 44.0 46.0 48.0 51.0 52.0 54.0
1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18
AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
HS57 HS60 HS64 HS65 HS67 HS68 HS70 HS73 HS76 HS79 HS83 HS86 HS89 HS92 HS95 HS98 HS102 HS105 HS108 HS111 HS114 HS121 HS127 HS140 HS152
57.0 60.0 64.0 65.0 67.0 68.0 70.0 73.0 76.0 79.0 83.0 86.0 89.0 92.0 95.0 98.0 102.0 105.0 108.0 111.0 114.0 121.0 127.0 140.0 152.0
1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18
AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
ARBORS
Product Code
For Holesaw Dia. (mm)
Shank
Thread Shank
14-30 14-30 32-210 14-30 32-210
Hex 9.5 Hex 11 Hex 11 SDS Plus SDS Plus
1/2” x 20 1/2” x 20 5/8” - 18 1/2” x 20 5/8” - 18
Singles
AA4
120 120
AA1
AA2
SDSA1
SDSA2
AA4 AA1 AA2 SDSA1 SDSA2
HOLESAWS
CUTTING
HOLESAWS - CONSTANT PITCH Available in:
Materials
Steel Constant Pitch
A constant pitch tooth pattern ensures smooth cutting and less “chatter” when drilling metal, particularly thin sheet. High quality M42 grade 5% Cobalt HSS steel cutting edge and compatible with most makes of arbor.
Product Code
Threaded Saw Ø (mm) Mount (inch)
Arbor to Suit
Product Code
AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
HSC65 HSC67 HSC68 HSC70 HSC73 HSC76 HSC79 HSC83 HSC86 HSC89 HSC92 HSC95 HSC98 HSC102 HSC108 HSC111 HSC114 HSC121 HSC127 HSC140 HSC152 HSC160 HSC165 HSC168 HSC177 HSC200 HSC210
Singles HSC14 HSC16 HSC17 HSC19 HSC20 HSC21 HSC22 HSC24 HSC25 HSC27 HSC29 HSC30 HSC32 HSC35 HSC37 HSC38 HSC40 HSC41 HSC43 HSC44 HSC46 HSC48 HSC51 HSC54 HSC57 HSC60 HSC64
Threaded Saw Ø (mm) Mount (inch)
Arbor to Suit
Singles 14.0 16.0 17.0 19.0 20.0 21.0 22.0 24.0 25.0 27.0 29.0 30.0 32.0 35.0 37.0 38.0 40.0 41.0 43.0 44.0 46.0 48.0 51.0 54.0 57.0 60.0 64.0
1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18
65.0 67.0 68.0 70.0 73.0 76.0 79.0 83.0 86.0 89.0 92.0 95.0 98.0 102.0 108.0 111.0 114.0 121.0 127.0 140.0 152.0 160.0 165.0 168.0 177.0 200.0 210.0
5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18
AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2
PILOT DRILLS & EXTENSION RODS HPD HPDL HPDC HSE
Product Code
Description
Length (mm)
Pilot drill Long pilot drill Cobalt drill Extension rod for AA2 (arbor)
75 105 75 300
Singles HPD HPDL HPDC HSE
121 121
DRY DIAMOND CORE BITS
CUTTING
DRY DIAMOND CORE BITS
Materials
Manufactured using laser-welded technology, these cores have been specifically designed to drill large clean holes in masonry and concrete block. For ROTARY USE ONLY.
Product Code
Drill Ø (mm)
Length
Height
(mm)
(mm)
22 28 32 38 48 52 65 78 82 91 107 117 127 152
300 300 150 150 150 150 150 150 150 150 150 150 150 150
10 10 10 10 10 10 10 10 10 10 10 10 10 10
Singles GPCP22300 GPCP28300 GPCP32150 GPCP38150 GPCP48150 GPCP52150 GPCP65150 GPCP78150 GPCP82150 GPCP91150 GPCP107150 GPCP117150 GPCP127150 GPCP152150
DIAMOND CORE KIT Five of the most popular sizes with all the accessories required in a aluminium case.
Product Code
Contents
PDCK5 38mm Core 52mm Core 65mm Core 117mm Core 127mm Core 1/2” BSP Extension 240mm 88mm Hex Adaptor 115mm SDS Adaptor 8 x 200mm Pilot Drill 8 x 75 Taper Drift
122 122
DIAMOND CORE ACCESSORIES
CUTTING
DRY DIAMOND CORE ACCESSORIES BSP EXTENSION Product Code
Overall Length
Fit
(mm)
Singles
A ½” BSP thread extension rod used where there is need for a deeper hole.
DCE240P
HEX ADAPTOR
SDS ADAPTOR
A ½” Hex with ½” BSP (male) thread, for use with a standard core drill. Available in 88mm and 240mm lengths.
A SDS Plus with ½” BSP (male) thread, for use with an SDS-Plus drill, when in rotary mode only. Available in 115mm and 240mm lengths.
Product Code
Product Code
Overall Length (mm)
Fit
88 240
1/2” BSP 1/2” BSP
Singles
240
1/2” BSP
Overall Length (mm)
Fit
115 240
1/2” BSP 1/2” BSP
Singles
DCAH88P DCAH240P
DCAS115P DCAS240P
PILOT DRILL
PILOT ROD
Morse taper TCT masonry drill bit used to prevent the core drifting.
Morse taper rod used once a hole has been drilled to prevent the core drifting.
Product Code
Product Code
Drill Ø (mm)
Length (mm)
Singles DCPD13210
Drill Ø (mm)
Length (mm)
Singles 13
210
DCPR225
12
225
TAPER DRIFT Product Code
Used for knocking morse taper tools out of spindles and sockets.
Drill Ø (mm)
Length (mm)
Singles DCTD
8
75
123 123
CUTTING
CHIMAERA
CHIMAERA
Materials
Product Code
Disc. Ă˜ Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles
A high quality multi-material blade designed for cutting construction materials. Continuous rim turbo segmented blade for smooth cutting of construction material and reinforced concrete.
BUSHING RINGS Metal rings for reducing a diamond blade bore size.
124 124
MM115222 MM125222 MM230222 MM30020 MM300222 MM35020 MM350254
Product Code
115 125 230 300 300 350 350
4 1/2 5 9 12 12 14 14
22.2 22.2 22.2 20.0 22.2 20.0 25.4
10 10 10 10 10 10 10
Description
Singles BR22220 BR25420
Reduces Bore from 22.2mm to 20mm Reduces Bore from 25.4mm to 20mm
WELDED BLADES
CUTTING
PREMIUM LASER WELDED BLADE
Materials
A premium quality laser welded, turbo segmented blade. For use in building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone. Product Code
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles GPPL115222 GPPL125222 GPPL230222 GPPL30020 GPPL300222 GPPL35020 GPPL350254 GPPL450254
115 125 230 300 300 350 350 450
4 1/2 5 9 12 12 14 14 18
22.2 22.2 22.2 20.0 22.2 20.0 25.4 25.4
12 12 12 12 12 12 12 12
BUSHING RINGS Metal rings for reducing a diamond blade bore size. Product Code
Singles BR22220 BR25420
LASER WELDED BLADE
A cost effective laser welded blade with longer life than the sintered blades. For use in medium density building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone.
Reduces Bore from 22.2mm to 20mm Reduces Bore from 25.4mm to 20mm
Materials
Product Code
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles GPL115222 GPL125222 GPL230222 GPL30020
SINTERED BLADE
An economic product for cutting medium density building materials such as common bricks, paving slabs, kerbs and lintels.
Description
115 125 230 300
41/2 5 9 12
22.2 22.2 22.2 20.0
10 10 10 10
Materials
Product Code
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles GPE115222 GPE230222 GPE30020
115 230 300
41/2 9 12
22.2 22.2 20.0
7 7 7
125 125
CERAMIC & MORTAR BLADES
CUTTING
CERAMIC BLADES
Materials
For use with angle grinders and portable tile cutting machines. Suitable for cutting ceramic tiles, marble, porcelain and natural stone. Can be used wet or dry.
THIN TURBO
SINTERED
A top quality blade for cutting porcelain, ceramics and marble. Continuous turbo design for minimal chipping of the material, while the special thin body reduces resistance and increases speed of cut.
A cost effective blade for cutting porcelain, ceramics and marble. Continuous rim for minimal chipping of the material
Product Code
Bore Segment (mm) Height (mm)
Product Code
22.2 22.2 22.2
TE10016 TE115222 TE150222 TE180222 TE180254
Disc. Ø Disc (mm) (inch)
Singles TP115222 TP125222 TP230222
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles 115 125 230
4 1/2 5 9
10 10 10
100 115 150 180 180
MORTAR RAKING BLADES
4 4 1/2 6 7 7
16.0 22.2 22.2 22.2 25.4
5 5 5 5 5
Materials
A product for raking mortar from between bricks prior to re-pointing.
SILVER BRAZED
SINTERED
A top quality product with 10mm silver brazed segments for a long service life.
An economic product with 7mm sintered segments.
Product Code
Bore Segment (mm) Height (mm)
Product Code
22.2 22.2
MRE115 MRE125
Disc. Ø Disc (mm) (inch)
Singles MRP115 MRP125
126 126
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles 115 125
4 1/2 5
10 10
115 125
4 1/2 5
22.2 22.2
7 7
CUTTING
GRINDING WHEEL & BONDED ABRASIVE
CUP GRINDING WHEEL
Materials
A double row, silver brazed wheel for smoothing and removing shutter marks from medium density concrete. Product Code
Disc. Ø Disc (mm) (inch)
Bore Segment (mm) Height (mm)
Singles CGDE115
115
4 1/2
22.2
10
BONDED ABRASIVE DISC
Materials
Used for cutting or grinding various types of metals. 1.0mm & 1.9mm are ideal for cutting stainless steel.
FOR CUTTING Product Code
Disc. Ø (mm)
FOR GRINDING Bore Thickness (mm) (mm)
Max RPM
Singles FCM115222 FCM230222 FCM30020 FCMT115222 FCMT125222 FCMT230222
Product Code
Disc. Ø (mm)
Bore Thickness (mm) (mm)
Max RPM
Singles 115 230 300 115 125 230
22.2 22.2 20.0 22.2 22.2 22.2
2.5 3.2 3.2 1.0 1.0 1.9
13,300 6,500 5,000 13,300 12,200 6,500
DGM11522
115
22.2
6.4
13,300
127 127
JIGSAW BLADES
CUTTING
JIGSAW BLADES High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. Hardened high speed steel (HSS) designed to cut hard materials such as mild steel, aluminium and other non-ferrous metals.
PREMIUM BI-METAL JIGSAW BLADES - FOR METAL Combining the flexibility of a high carbon steel body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. Longer service life leads to greater cost effectiveness per blade. AMG11BI
AMC12BI
AMG12BI
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Qty
T118AF T118BF T101AF
Metal Metal Metal
Straight Straight Straight
Fine Medium Clean
76.5 76.5 100
1.2 - 3.0 2.5 - 6.0 2.0 - 20
21 13 10
5 5 5
Packs AMG11BI AMG12BI AMC12BI
HIGH SPEED STEEL JIGSAW BLADES - FOR METAL Hardened high speed steel designed to cut hard materials such as mild steel, aluminium and other non-ferrous metals AMG11
AMG12
AMG21
AMG32
AMG31
AK14
AMG107
AK24
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Qty
T118A T218A T318A T118G T118B T318B T127D T227D
Metal Metal Metal Metal Metal Metal Metal Metal
Standard Standard Standard Standard Standard Standard Long Life Long Life
Fine Fine Fine Extra Fine Medium Medium Medium Coarse
76.5 76.5 132 76.5 76.5 132 100 100
1.2 - 3.0 1.2 - 3.0 1.0 - 3.0 (65*) 0.5 - 1.5 2.5 - 6.0 2.5 - 6.0 (65*) 3.0 - 15 3.0 - 15
21 21 25 36 13 14 8.5 8.5
5 5 5 5 5 5 5 5
Packs AMG11 AMG21 AMG31 AMG107 AMG12 AMG32 AK14 AK24
128 128
JIGSAW BLADES
CUTTING
PREMIUM BI-METAL JIGSAW BLADES - FOR WOOD Combining the flexibility of a high carbon steel body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. Longer service life leads to greater cost effectiveness per blade. AHC12BI
AHGS14BI
AHC12RBI
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Qty
T101BF T101BRF T144DF
Hardwood Laminate Hardwood
Straight Straight Straight
Clean Down & Clean Fast & Coarse
100 100 100
3.0 - 30.0 3.0 - 45.0 5.0 - 50.0
10 10 3.35
5 5 5
Packs AHC12BI AHC12RBI* AHGS14BI
*Down cut blades for laminated board, flooring and worktops
HIGH SPEED STEEL JIGSAW BLADES - FOR WOOD High quality carbon steel for use with softer materials, such as soft wood, plastics and laminated boards. AHC12K
AHC14D
AHC12
AHC12R
AHC14
AHC32R
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Qty
T101AO T101B T101D T101DP T101BR -
Wood Wood Wood Wood Laminate Laminate
Curved Straight Straight Straight Straight Straight
Fine & Clean Fine & Clean Clean Clean Down & Clean Down & Clean
76.5 100 100 100 100 132
1.5 - 15.0 3.0 - 30.0 10 - 45.0 10 - 45.0 3.0 - 30.0 3.0 - 65.0
19 10 6.35 6.35 10 10
5 5 5 5 5 5
Packs AHC12K AHC12 AHC14 AHC14D AHC12R* AHC32R*
*Down cut blades for laminated board, flooring and worktops .
HIGH CARBON JIGSAW BLADES - FOR WOOD High carbon steel for use with softer materials, such as soft wood and plastics AHW12
AHGS24
AHW12K
AHG13
AHGS14
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Qty
T119B T119BO T144D T244D T111C
Wood Wood Wood Wood Wood
Straight Curved Straight Curved Straight
Smooth & Clean Smooth & Clean Fast & Coarse Fast & Coarse Coarse
76.5 76 100 100 100
2.0 - 15.0 2.0 - 15.0 5.0 - 50.0 5.0 - 50.0 4.0 - 50.0
13 12 3.35 3.35 8.5
5 5 5 5 5
Packs AHW12 AHW12K AHGS14 AHGS24 AHG13
129 129
RECIPROCATING SAWS
CUTTING
RECIPROCATING SAWS A range of saw blades used with most leading brands of reciprocating saws.
PREMIUM BI-METAL BLADES - FOR WOOD Combining the flexibility of a High Carbon Steel body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. A3021/300BI
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Qty
S1411DF
Hardwood
Straight
Medium
300
10.0 - 250
6
5
Packs A3021/300BI
HIGH CARBON BLADES - FOR WOOD Hardened high speed steel designed to cut hard materials such as mild steel, aluminium and other non-ferrous metals. A3021/150
A3029/240
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Qty
S644D S1531L
Wood Green Wood
Straight Straight
Medium Medium
150 240
10.0 - 100 10.0 - 190
6 6
5 5
Teeth Per Inch
Qty
-
3
Packs A3021/150 A3029/240
KNIFE EDGE BLADES - FOR RUBBER & CARPET The knife edge blade is used to cut materials such as insulation, foam, rubber and carpet. ARWM300
Product Code
Bosh Equiv.
Application
Blade Type
N/A
Rubber/Carpet
Wavy
Cut Type
Overall Length (mm)
Cutting Capacity (mm)
Packs ARWM300
130 130
300
RECIPROCATING SAWS
CUTTING
PREMIUM BI-METAL BLADES - FOR METAL Combining the flexibility of a High Carbon Steel body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. A3021/300BI
Product Code
Bosh Equiv.
Application
Blade Type
Cut Type
S922BF S1122BF S922EF S1122EF S922AF S1122AF -
Stainless Stainless Metal Metal Sheet Metal Sheet Metal Metal
Straight Straight Straight Straight Straight Straight Straight
Fine Fine Fine Fine Extra Fine Extra Fine Coarse
Overall Cutting Length (mm) Capacity (mm)
Teeth Per Inch
Pack Qty
14 14 18 18 24 24 10
5 5 5 5 5 5 5
Packs A3013/150 A3013/200 A3014/150 A3014/200 A3015/150 A3015/200 A3018/280
150 200 150 200 150 200 280
3.0 - 8.0 3.0 - 8.0 1.5 - 4.0 1.5 - 4.0 0.7 - 3.0 0.7 - 3.0 3.5 - 7.0
DEMOLITION BLADES A selection of saw blades used with most leading brands of reciprocating saws. Used mainly for cutting multiple materials. A3050/300
Product Code
Bosh Equiv.
Application
Overall Length (mm)
Working Length (mm)
Cutting Capacity (mm)
Teeth Per Inch
Pack Qty
S920CF S1120CF S610DF S1110DF -
Wood, Metal & Plastic Wood, Metal & Plastic Wood, Metal & Plastic Wood & Sandwich Material Wood & Sandwich Material Wood & Sandwich Material
150 225 300 150 225 300
130 205 280 130 205 280
3.0 - 50 3.0 - 50 3.0 - 50 > 3.0 > 3.0 > 3.0
10 10 10 6 6 6
3 3 3 3 3 3
Packs A3050/150 A3050/225 A3050/300 A3055/150 A3055/225 A3055/300
METAL HACKSAW BLADES Choose fine pitch (32T) for thinner materials, a coarser pitch (18T) for thicker steel. The teeth should point towards the front of the saw and cut on the push stroke. Ideally, at least three teeth should be in the material. HSB18
Product Code
HSB18 HSB24 HSB32
Overall Length (mm)
Teeth Per Inch
Box Qty
300 300 300
18 24 32
100 100 100
131 131
CIRCULAR SAW BLADES
CUTTING
BLADES FOR WOOD Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials. ALL OUR BLADES CUT HARDWOOD, SOFTWOOD AND EXOTIC TIMBER.
COARSE / MEDIUM
MEDIUM
MEDIUM / FINE
EXTRA FINE
(GENERAL PURPOSE)
(COMBINATION)
(TRIMMING / CROSSCUT)
(FINE TRIM / FINISHING)
• Stone Fibre Board
• Plywood • Cement Bonded Board • Soft Fibre Board
• Veneers - Single & Double Sided • Plywood, Hardboard & MDF • Particle Board with Plastic Laminate On One Side
• Plywood • Cement Bonded Board • Soft Fibre Board
CIRCULAR SAW BLADES For use in corded and cordless circular saws with blade sizes 140mm to 315mm. Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Bore (mm)
Cut Type
No. of Teeth
Kerf (mm)
Bushing Ring Size (mm)
140 150 150 160 160 165 184 184 184 184 184 190 190 210 216 216 216 216 230 230 235 235 235 250 250 250 254 254 254 260 260 300 300 300 315 315 315
5 1/2 6 6 61/4 61/4 61/2 71/4 71/4 71/4 71/4 71/4 71/2 71/2 81/4 81/2 81/2 81/2 81/2 9 9 91/4 91/4 91/4 10 equiv. 10 equiv. 10 equiv. 10 10 10 101/4 101/4 117/8 117/8 117/8 123/8 123/8 123/8
20 20 20 30 30 30 16 30 16 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium / Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Extra Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium Medium / Fine Extra Fine Coarse / Medium Medium Medium / Fine Coarse / Medium Medium / Fine Medium Medium / Fine Medium / Fine Coarse / Medium Medium Medium / Fine
16 12 40 16 24 18 24 24 40 40 60 24 40 32 24 40 60 80 30 40 24 40 60 40 60 80 30 40 60 30 60 40 60 80 30 48 60
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3
16.00 16.00 16 or 20 16 or 20 16 or 20 25.00 16 or 20 16 or 20 16 or 20 16,20 or 25.4 16,20 or 25.4 16,20 or 25.4 -
Singles C1402016 C1502012 C1502040 C1603016 C1603024 C1653018 C1841624 C1843024 C1841640 C1843040 C1843060 C1903024 C1903040 C2103032 C2163024 C2163040 C2163060 C2163080 C2303030 C2303040 C2353024 C2353040 C2353060 C2503040 C2503060 C2503080 C2543030 C2543040 C2543060 C2603030 C2603060 C3003040 C3003060 C3003080 C3153030 C3153048 C3153060
132 132
CIRCULAR SAW BLADES
CUTTING
CORDLESS TRIM SAW BLADES Designed for use with hand-held cordless circular saws, this range includes blades for use on all types of timber and man-made boards. Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Bore (mm)
Cut Type
No. of Teeth
Kerf (mm)
136 150 165 165 165 190
53/8 6 61/2 61/2 61/2 71/2
10 10 10 20 10 30
Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium
24 24 24 24 40 24
1.6 1.6 1.6 1.6 1.6 1.6
Singles T1361024 T1501024 T1651024 T1652024 T1651040 T1903024
ZERO DEGREE MITRE SAW BLADES For use with most mitre saws, these blades have precision ground teeth to give a clean and smooth cut in all types of timber and man-made boards.
Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Bore (mm)
Cut Type
No. of Teeth
Kerf (mm)
216 216 250 250
81/2 81/2 10 equiv. 10 equiv.
30 30 30 30
Coarse / Medium Medium / Fine Medium Medium / Fine
24 48 48 60
2.4 2.4 3 3
Singles Z2163024 Z2163048 Z2503048 Z2503060
BLADES FOR ALUMINIUM Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials.
FINE
(ALUMINIUM / PLASTIC) • Thin Walled Extrusions • Panels Of Aluminium • Plastic
-5 DEGREE ALUMINIUM BLADES A range of blades for sizes 216, 250 and 305mm diameters. Product Code
Blade Ø (mm)
Blade Ø (inch equiv.)
Bore (mm)
Cut Type
No. of Teeth
Kerf (mm)
216 216 250 305 305 305
81/2 81/2 10 equiv. 12 12 12
30 30 30 30 30 30
Fine Fine Fine Fine Fine Fine
60 80 80 48 60 80
2.4 2.4 2.4 3 3 3
Singles A2163060 A2163080 A2503080 A3053048 A3053060 A3053080
133 133
RANGE OF
ADVANCED SCREWS
SEE PAGES 9-11 FOR FULL DETAILS
The TIMco C2 has been engineered around the backbone of the TIMco Classic, one of Europe’s largest selling MultiPurpose screws.
Specifically designed for attaching tongue and groove floorboards to flooring joists. The C2 Tongue-Fix gives a secure fixture through the tongue without causing Pantone 7563 C C16, M44, Y100, K1 damage, allowing a flush fit with the next board.
UP TO
WI N
PATENTED T
HIGH PERFORMANCE MULTI-PURPOSE SCREWS
C
NOLOGY TECH T U
43%
*
QUICKER
52%
*
LESS TORQUE
Multi-layer protection plating that consists of an organic top coat barrier layer and a zinc base layer. Excellent protection against corrosion in exterior HO applications. SAL URS
1,000 T SPR
AY
Designed for fixing flooring boards to timber structures. Ideal for: • Chipboard • Engineered Wood • MDF • Fibre Board • Solid timber * Compared against standard woodscrew
DRIVER BITS AND ADAPTORS 136 - V5 IMPACT BITS 137 - S2 DRIVER BITS 138 - SOCKET DRIVERS & ADAPTORS
135
DRIVER BITS
V5 IMPACT DRIVER BITS
V5 IMPACT DRIVER BITS Toughened for impact
V5 steel has been specifically designed to withstand the extreme pressures of an impact driver. This durable hardened and patented bit will extend the lifespan and gives optimum performance in all impact applications.
V5 POZI DRIVER BITS
Product Code
Size
Length (mm)
Qty
Handy Packs
V5 PHILLIPS DRIVER BITS
1CB25V5 2CB25V5 3CB25V5 1CB50V5 2CB50V5 3CB50V5
PZ1 PZ2 PZ3 PZ1 PZ2 PZ3
Product Code
Size
25 25 25 50 50 50
Length (mm)
10 10 10 5 5 5
Qty
Handy Packs
V5 TIM DRIVE DRIVER BITS
1PH25V5 2PH25V5 3PH25V5 2PH50V5 3PH50V5
PH1 PH2 PH3 PH2 PH3
Product Code
Size
25 25 25 50 50
Length (mm)
10 10 10 5 5
Qty
Handy Packs 20TX25V5 25TX25V5 30TX25V5 40TX25V5 30TX50V5
136 136
T20 T25 T30 T40 T30
25 25 25 25 50
10 10 10 10 5
S2 DRIVER BITS
DRIVER BITS
S2 DRIVER BITS Hardened steel bits
S2 Steel is a premium quality alloy steel for exceptional strength and durability over the standard chrome vanadium driver bits.
PHILLIPS DRIVER BITS
Product Code
Size
Length (mm)
Qty
Handy Packs 1PH25PACK 2PH25PACK 3PH25PACK 2PH50PACK 3PH50PACK
Product Code
25 25 25 50 50
10 10 10 5 5
PH 2 PH 2 PH 2
100 150 300
1 1 1
1CB25PACK 2CB25PACK 3CB25PACK 4CB38PACK 1CB50PACK 2CB50PACK 3CB50PACK
Size
Length (mm)
T10 T15 T20 T25 T30 T40 T30
Product Code
25 25 25 25 25 25 50
10 10 10 10 10 10 5
Size
Length (mm)
Qty
5.5 x 0.8 6.0 x 1.0 7.0 x 1.2 10.0 x 1.6
25 25 25 25
PZ 1 PZ 2 PZ 3 PZ 4 PZ 1 PZ 2 PZ 3
25 25 25 38 50 50 50
10 10 10 10 5 5 5
PZ 2 PZ 2 PZ 2
100 150 300
1 1 1
Size
Length (mm)
Qty
Handy Packs 2SQ25PACK 2SQ50PACK
No.2 No.2
25 50
10 5
No.2
25
2
Blister Packs 2SQ25GB
HEX DRIVER BITS
Product Code
Size
Length (mm)
Qty
Handy Packs
Handy Packs 5508SL25GB 6010SL25GB 7012SL25GB 1016SL25GB
Qty
SQUARE DRIVER BITS
SLOTTED DRIVER BITS
Product Code
(mm)
Qty
Handy Packs 10TX25PACK 15TX25PACK 20TX25PACK 25TX25PACK 30TX25PACK 40TX25PACK 30TX50PACK
Length
Mini Bit Packs 2CB100GB 2CB150GB 2CB300GB
TIM DRIVE DRIVER BITS
Product Code
Size
Handy Packs PH 1 PH 2 PH 3 PH 2 PH 3
Mini Bit Packs 2PH100GB 2PH150GB 2PH300GB
POZI DRIVER BITS
2 2 2 2
3HX25GB 4HX25GB 5HX25GB 6HX25GB 8HX25GB
3.0 4.0 5.0 6.0 8.0
25 25 25 25 25
2 2 2 2 2
137 137
DRIVER BITS
SOCKET DRIVERS & ADAPTORS
SOCKET DRIVERS & ADAPTORS SOCKET DRIVERS
Product Code
Length
Size
(mm)
Type
Pack Qty
Mini Bit Packs Also known as a 1/4” Nut Setter. Used for installing hexagon headed fasteners with a power tool.
516SDB 6SDB 10SDB 11BHSDB 13SDB
5/16” 6mm 10mm 11mm 13mm
65 65 65 65 65
Hex Hex Hex Bi-Hex Hex
1 1 1 1 1
5/16” 10mm
65 65
Hex Hex
20 20
Bit Packs 516SDJ 10SDJ
ONE PIECE ADAPTORS
TWO PIECE ADAPTORS
A magnetic 1/4” hex drive adaptor machined from a single piece of stainless steel to give extended life and durability. Available with or without a circlip to improve bit retention. Product Code
Length (mm)
Type
Qty
Circlip
1 1
Mini Bit Packs 60MASSB 60MASSCB
60 60
An economic magnetic 1/4” hex drive adaptor manufactured from two pieces of carbon steel. Available with or without a circlip to improve bit retention or with a quick release collar.
REGULAR Product Code
Length
Type
Qty
60 60 150 300
Circlip Circlip Circlip
1 1 1 1
60 60
Circlip
20 20
Type
Pack Qty
60 150 300
Circlip Circlip Circlip
1 1 1
60
Circlip
20
(mm)
Mini Bit Packs
SDS ADAPTORS
60MAB 60MACB 150MACB 300MACB
Bit Packs A magnetic SDS Plus to 1/4” hex drive adaptor, ideal for converting your SDS-Plus drill in to a screwdriver when in rotary mode only. Product Code
Length (mm)
Type
Qty
1/4
1
Mini Bit Packs 80MASDSCB
60MAJ 60MACJ
QUICK RELEASE Product Code
Length (mm)
Mini Bit Packs 80
60MAQRB 150MAQRB 300MAQRB
Bit Packs 60MAQRJ
138 138
ADHESIVE TAPES AND PROTECTIVE FILMS 140 - HEAVY DUTY CLOTH TAPE 140 - CLOTH TAPE 140 - DOUBLE SIDED TAPE 140 - MASKING TAPE 141 - PACKING TAPE 141 - ANTI-SLIP TAPE
141 - HAZARD TAPE 141 - BARRIER TAPE 142 - PVC INSULATION TAPE 142 - ALUMINIUM FOIL TAPE 142 - SHIELD PROTECTIVE FILMS
139
ADHESIVE TAPES & PROTECTIVE FILMS
HEAVY DUTY CLOTH TAPE
DOUBLED SIDED CLOTH TAPE
Available in:
Available in:
Black
Silver
White
A super-strength tape. Water resistant and extremely durable, this industrial quality tape is designed to be used in multiple indoor and outdoor applications.
Product Code
Length
Width
(mm)
(mm)
50 50 50
50 50 50
Colour
Qty
Black Silver White
1 1 1
Packs HDCTBLACK HDCTSILVER HDCTWHITE
Available in:
Black
Silver
White
A medium quality cloth tape used to repair, fasten, bundle, strengthen, mark, plus much more.
Product Code
Length
Width
(mm)
(mm)
50 50 50
48 48 48
Colour
Qty
Black Silver White
1 1 1
Packs CTBLACK CTSILVER CTWHITE
White
A strong double sided cloth tape designed to stick two surfaces together where an invisible joint is required. Ideal for fixing carpets, signs and protective sheeting to multiple surfaces.
Product Code
Length
Width
(mm)
(mm)
25
50
Colour
Qty
White
1
Packs DSCT
MASKING TAPE
CLOTH TAPE
140 140
CLOTH AND MASKING TAPE
Available in:
Cream
A general purpose masking tape for professional results. Designed to be easily removed for up to three days without leaving residue or damaging the surface.
Product Code
Length
Width
(mm)
(mm)
50 50 50
25 38 50
Colour
Qty
Cream Cream Cream
1 1 1
Packs MT25 MT38 MT50
PACKAGING, ANTI-SLIP, HAZARD & BARRIER
ADHESIVE TAPES & PROTECTIVE FILMS
PACKAGING TAPE
HAZARD TAPE
Available in:
Available in:
Clear
Brown
A quality tape giving you an instant and secure fixture, ideal for sealing boxes, attaching labels and general packing applications
Product Code
Length
Width
(mm)
(mm)
50 50
48 48
Colour
Qty
Clear Brown
3 3
Packs
ANTI-SLIP TAPE Black Yellow
Length
Width
(mm)
(mm)
33
50
Length
Width
(mm)
(mm)
10 10
50 50
HAZT
Available in:
Black
Colour
Qty
Packs ASTSTRIPE ASTBLACK
Product Code
Colour
Qty
Black & Yellow
1
BARRIER TAPE
A durable non-adhesive polythene barrier tape, ideal for marking out hazardous areas. Can be used internally and externally.
Product Code
A durable self adhesive PVC hazard tape, ideal for marking floors, walls and hazardous areas. Can be used internally and externally.
Packs
PTC PTB
Available in:
Black Yellow
Black & Yellow Black
1 1
Red White
A durable non-adhesive polythene barrier tape, ideal for marking out hazardous areas. Can be used internally and externally.
Product Code
Length
Width
(mm)
(mm)
100
70
Colour
Pack Qty
Red & White
1
Packs BART
141 141
ADHESIVE TAPES & PROTECTIVE FILMS
INSULATION, ALUMINIUM TAPE & SHIELD
PVC INSULATION TAPE
ALUMINIUM FOIL TAPE
Ideal for insulating electrical wires and joints. Easily torn by hand, written on and cleanly removed from smooth surfaces.
This tape is Ideal for multiple applications in the electrical, heating, ventilation and air conditioning industry. It can be used in jobs requiring moisture and chemical resistance, thermal conductivity, flame resistance, heat and light reflectance and is weather resistant. Perfect for joining foil covered insulation, sealing off pipes and ducts.
Product Code
Length
Width
(mm)
(mm)
25 25 25 25 25 25 25
18 18 18 18 18 18 18
Colour
Qty
Black Red White Blue Green Yellow Green/Yellow
10 10 10 10 10 10 10
Packs ITBLACK ITRED ITWHITE ITBLUE ITGREEN ITYELLOW ITGYSTRIPE
SHIELD PROTECTIVE FILMS
Product Code
Length
Width
(mm)
(mm)
45 45 45
50 75 100
CARPET FILM
Product Code
142 142
Silver Silver Silver
1 1 1
HARD SURFACE FILM
Size T x W x L (Metric)
Rolls 25HP 50HP
0.05mm x 0.6m x 25m 0.05mm x 0.6m x 50m
GLASS FILM
Size T x W x L (Metric)
Rolls 25CP 50CP 100CP
Qty
Packs AFT50 AFT75 AFT100
Product Code
Shield protective film is a highly effective selfadhesive product, giving protection from foot traffic, debris, spills etc. Easy to apply, the film can be left for up to 30 days before simple removal.
Colour
0.05mm x 0.6m x 25m 0.05mm x 0.6m x 50m 0.05mm x 0.6m x 100m
Product Code
Size T x W x L (Metric)
Rolls 25WP 50WP
0.05mm x 0.6m x 25m 0.05mm x 0.6m x 50m
IRONMONGERY 144 - TUBULAR LATCHES 144 - ADJUSTABLE ROLLER CATCHES 144 - BALES CATCHES 145 - MAGNETIC CATCHES 145 - DOUBLE ROLLER CATCHES 145 - DOUBLE BALL CATCHES
145 - MODESTY BLOCKS 145 - KNOCK DOWN BLOCKS 146 - PVC DOOR STOPS 146 - PVC DOOR WEDGES 146 - SPRING DOOR STOPS
143
IRONMONGERY
DOOR ACCESSORIES A comprehensive range of door and cupboard accessories for a variety of applications.
TUBULAR LATCHES -
Brass
Nickel
Designed for use on internal doors with a lever handle. Supplied with matching strike plate in electro brass or nickel plated finishes.
Product Code
Used for securing internal doors that require just a push/pull handle. Adjustable roller to adjust the closing tension of the door. Supplied with matching strike plate in electro brass or nickel plated finishes
Used for securing internal doors that require just a push/pull handle. Supplied with matching strike plate in electro brass.
144 144
Plating
Qty
67 x 60 67 x 60
Electro Brass Nickel
1 1
Packs TLBRASS63P TLNICKEL63P
ADJUSTABLE ROLLER CATCHES -
BALES CATCHES -
Size LxW
Brass
Nickel
Product Code
Size LxW
Plating
Qty
39 x 59 39 x 59
Electro Brass Nickel
1 1
Size LxW
Plating
Qty
57 x 23
Electro Brass
2
Packs ARCBRASSP ARCNICKELP
Brass Product Code
Packs BC19P
IRONMONGERY MAGNETIC CATCHES Product Code
A surface mounted light duty catch for securing cupboard or cabinet doors.
Colour
Qty
58 x 22 x 16 58 x 22 x 16
4.0 6.0
White White
2 2
Zinc Product Code
A surface mounted push fit catch for securing cupboard or cabinet doors.
A solid brass push fit catch for securing cupboard or cabinet doors.
Strength (kg)
Packs MC4P MC6P
DOUBLE ROLLER CATCHES -
DOUBLE BALL CATCHES -
Size LxWxH
Size (mm)
Plating
Qty
28 x 32
Zinc
2
Packs DRP
Brass
Chrome Product Code
Size (mm)
Plating
Qty
43 x 8 50 x 8.5 43 x 8 50 x 8.5
Electro Brass Electro Brass Chrome Satin Chrome Satin
2 2 2 2
Packs DBC40BRASSP DBC50BRASSP DBC40CHROMEP DBC50CHROMEP
MODESTY BLOCKS Used for the assembly of boards at 90 degrees.
Product Code
Size LxWxH
Colour
Qty
34 x 13 x 13 34 x 13 x 13
White Brown
10 10
Size LxWxH
Colour
Qty
35 x 25 x 12 35 x 25 x 12
White Brown
4 4
Packs MBWHITEP MBBROWNP
KNOCK DOWN BLOCKS Used for the assembly of boards at 90 degrees. Secured with a bolt into the thread of the second block which draws the two fittings together.
Product Code
Packs KDWHITEP KDBROWNP
145 145
IRONMONGERY PVC DOOR STOPS Product Code
A floor mounted door stop used to prevent doors from damaging walls.
Size (mm)
Plating
Qty
21 x 32 21 x 32
Black White
2 2
Size (mm)
Plating
Qty
DWEDGE
136 x 43 x 29
Grey
1
Product Code
Size (mm)
Plating
Qty
78 x 24 78 x 24
Brass Nickel
2 2
Packs DSBLACKP DSWHITEP
PVC DOOR WEDGES Product Code
A triangular shaped wedge used to temporarily stop doors from closing.
SPRING DOOR STOPS -
Packs
Brass
A wall or skirting board mounted door stop used to prevent doors from damaging walls.
Nickel
Packs SSBRASSP SSNICKELP
Available in Yellow, Zinc, Black & Stainless Steel See pages 12-14 Mixed Trays on page 20 146 146
To BS EN
ISO 1459
2:2008
PADLOCKS AND SECURITY 148 - WEATHERPROOF PADLOCKS 148 - LAMINATED PADLOCKS 148 - COMBINATION PADLOCKS 149 - BRASS PADLOCKS 149 - ARMOURED PADLOCKS
149 - BRASS RECTANGULAR PADLOCKS 150 - DISC PADLOCKS 150 - CABLE LOCKS 150 - LOOPED CABLE 150 - SECURITY CHAINS
147
LOCKS & SECURITY SOLUTIONS
WEATHERPROOF, LAMINATED & COMBINATION
WEATHERPROOF PADLOCKS A laminated padlock with a durable vinyl cover to enhance corrosion resistance and improve weatherproofing. IDEAL FOR:
Sheds
Product Code
SECURITY RATING
WEATHER RATING
Gates
Chains
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
40
8
5
3
1
Packs WP40
LAMINATED PADLOCKS An economic padlock ideal for lower security applications.
SECURITY RATING
IDEAL FOR:
Sheds
Product Code
WEATHER RATING
Gates
Chains
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
40 40 40 40
6.1 6.1 8.8 8.8
5 4 6 5
3 3 3 3
1 1 1 1
Packs LSP40 LSP40L* LSP50 LSP50L*
* Long Shackle
COMBINATION PADLOCKS A key-less solution commonly used on luggage, tool boxes and storage lockers.
SECURITY RATING
IDEAL FOR: WEATHER RATING Luggage Toolboxes
Product Code
Storage Lockers
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Dials
Qty
21 28 38
3.1 5 6
1 2 3
3 4 4
1 1 1
Packs CP21 CP28 CP38
148 148
BRASS & RECTANGULAR PADLOCKS
LOCKS & SECURITY SOLUTIONS
BRASS PADLOCKS A durable medium security padlock used for a variety of applications. IDEAL FOR:
SECURITY RATING
WEATHER RATING
Luggage
Cabinets
Sheds
Gates
Product Code
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
30 40 40 40 50 50
5.2 6.3 6.3 6.3 8.1 8.1
3 5 5 4 6 5
3 3 3 3 3 3
1 1 2 1 1 1
Packs P30 P40 P40X2 P40L* P50 P50L*
* Long Shackle
BRASS RECTANGULAR PADLOCKS A high security padlock used for securing chain, shuttering and catches where there is a risk of cropping, hacksaw or hammer attacks.
SECURITY RATING
WEATHER RATING
IDEAL FOR:
Shutters
Garages
Product Code
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
75
11.7
8
3
1
Packs RP75
ARMOURED RECTANGULAR PADLOCKS A durable medium to high security padlock used for securing chain, shuttering and catches where there is a risk of cropping or hacksaw attacks. IDEAL FOR:
Chains
Product Code
SECURITY RATING
WEATHER RATING
Shutters
Garages
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
90
12
9
3
1
Packs ARP90
149 149
LOCKS & SECURITY SOLUTIONS
DISC LOCKS, CABLES & CHAINS
DISC PADLOCKS A corrosion resistant medium to high security padlock used for securing chain and catches where there is a risk of cropping attacks.
SECURITY RATING
IDEAL FOR:
Shutters
WEATHER RATING
Gates
Product Code
Garages
Sheds
Size
Shackle Gauge
(mm)
(mm)
Security Rating
Keys
Qty
70
9
8
3
1
Packs DP70
CABLE LOCK Protective vinyl coating to enhance corrosion resistance a nd scratch prevention. Four dial combination gives multiple locking options.
SECURITY RATING
IDEAL FOR: WEATHER RATING Bicycles
Machinery
Product Code
Ladders
Size
Cable Gauge
(mm)
(mm)
Security Rating
Dials
Qty
1000
8
4
4
1
Packs CL1000
LOOPED CABLE
SECURITY CHAIN
A weather resistant, braided steel security cable for increased strength and flexibility. Ideal for securing gates, site machinery and ladders.
A hardened steel security chain with anti-crop square links, covered with an anti-scratch nylon protective sleeve.
SECURITY RATING
SECURITY RATING
WEATHER RATING
WEATHER RATING
IDEAL FOR:
IDEAL FOR:
Machinery
Gates
Ladders
Product Code
Size
Cable Gauge
(mm)
(mm)
Security Rating
Qty
1800 3000
10 15
6 7
1 1
Packs LC1800 LC3000
150 150
Machinery
Bicycles
Ladders
Product Code
Size
Chain Gauge
(mm)
(mm)
Security Rating
Qty
1000
8
8
1
Packs SC1000
INDEX No.
3 FLUTE COUNTERSINKS....................................... 116 100 RANGE....................................................................... 41 111 RANGE....................................................................... 42 120 RANGE....................................................................... 43 135 RANGE....................................................................... 44 141* RANGE..................................................................... 44 150 RANGE....................................................................... 43 200 RANGE....................................................................... 41 211 RANGE....................................................................... 42 215 RANGE....................................................................... 42 230 RANGE....................................................................... 43 423 RANGE....................................................................... 43
A
ACCESSORIES................................................................. 73 ADAPTOR............................................................. 104, 117 ADJUSTABLE ROLLER CATCHES......................... 144 ALUMINIUM BLADES............................................... 133 ALUMINIUM FOIL TAPE.......................................... 142 ALUMINIUM LOOSE NAILS...................................... 85 ANCHORS......................................................................... 59 ANCHOR STUDS............................................................ 70 ANGLE BRACES.............................................................. 98 ANGLED BRACKETS..................................................... 93 ANGLED BRADS............................................................ 76 ANNULAR RING SHANK............................................ 78 ANNULAR RINGSHANK.............................................. 84 ANTI-SLIP TAPE........................................................... 141 ARBORS........................................................................... 120 ARRIS RAIL BRACKETS................................................ 97 AUGER BITS................................................................... 109
B
BALES CATCHES......................................................... 144 BARRIER TAPE.............................................................. 141 BASIN FIXING KITS....................................................... 56 BAYPOLE........................................................................... 40 BIDET FIXING KITS........................................................ 56 BLACKJAX......................................................................... 18 BLACKSMITHS DRILLS............................................. 114 BLOW-OUT PUMP........................................................ 73 BONDED ABRASIVE DISC...................................... 127 BRACES.............................................................................. 98 BRAD NAILS..................................................................... 76 BRAD POINT WOOD BITS...................................... 108 BRASS PADLOCKS...................................................... 149 BRIGHT LOOSE NAILS.................................. 78, 79, 80 BROACHING CUTTERS............................................ 115 BRUSHES........................................................................... 73 BSP EXTENSION.......................................................... 123 BUILDERS METAL WORK........................................... 88 BUSHING RINGS............................................... 124, 125
C
C2速 CLASSIC...................................................................... 9 C2速 FLOORING & MDF............................................... 10 C2速 TONGUE-FIX........................................................... 11 C2速 TRADE CASE........................................................... 10 CABLE LOCK................................................................. 150 CABLE TIE PLUGS.......................................................... 54 CABLE TIES....................................................................... 54 CABLE TRAY BOLTS...................................................... 47 CARCASS SCREWS....................................................... 19 CARPET FILM............................................................... 142 CARRIAGE BOLT............................................................. 46 CARRIAGE BOLTS.......................................................... 23 CAVITY ANCHORS........................................................ 59 CEILING ANCHORS...................................................... 62 CERAMIC BLADES...................................................... 126 CHEMICAL ANCHOR STUDS................................... 70 CHIMAERA..................................................................... 124 CHUCK................................................................... 117, 118 CHUCKS................................................................ 117, 118
CILL SCREWS................................................................... 40 CIRCULAR SAW BLADES........................................ 132 CLAD PINS........................................................................ 77 CLASSIC.......................................... 9, 12, 13, 14, 20, 28 CLASSIC HINGE SCREW............................................. 13 CLASSIC PAN HEAD..................................................... 13 CLIPPED HEAD NAILS................................................ 75 CLOAKROOM BASIN FIXING KITS......................... 56 CLOTH TAPE.................................................................. 140 CLOUT................................................................. 81, 82, 85 COACH SCREWS.................................................... 23, 24 COACH SCREWS & NYLON PLUGS....................... 24 COARSE THREAD.................................................. 26, 28 COBALT JOBBER DRILLS......................................... 110 COLLATED SCREWS..................................................... 28 COMBINATION PADLOCKS................................... 148 COMPOSITE PANEL...................................................... 32 CONCRETE BOLT........................................................... 66 CONCRETE & MASONRY FIXINGS........................ 61 CONCRETE SCREW....................................................... 65 CONE CUTTERS.......................................................... 116 CONNECTORS................................................................ 98 COPPER DISC RIVETS.................................................. 86 COPPER LOOSE NAILS............................................... 85 COPPER STRAPS............................................................ 86 CORNER BRACES........................................................... 98 CORNER PLATES............................................................ 99 COUNTERSINKS.......................................................... 116 COVER CAPS................................................................... 34 CUP GRINDING WHEEL.......................................... 127 CUT CLASP NAILS........................................................ 80 CUT FLOORING BRADS.............................................. 80 CUTTING.............................................................. 120, 127
D
DE-BURRING................................................................. 116 DECKING SCREW.......................................................... 21 DEMOLITION BLADES............................................. 131 DIAMOND BLADE............................................ 124, 125 DIAMOND CORE ACCESSORIES......................... 123 DIAMOND CORE BITS.............................................. 122 DIAMOND CORE KIT................................................ 122 DIAMOND DRILL BITS............................................. 107 DISC PADLOCKS......................................................... 150 DOOR ACCESSORIES............................................... 144 DOOR STOPS............................................................... 146 DOOR WEDGES........................................................... 146 DOUBLE BALL CATCHES........................................ 145 DOUBLE ROLLER CATCHES.................................. 145 DOWTY TYPE WASHER.............................................. 35 DRILLING GUIDES..................................................... 107 DRILL SET................................................... 110, 111, 112 DRIVER BITS.................................... 135, 136, 137, 138 DRIVE SCREW.................................................................. 83 DROP IN ANCHORS..................................................... 67 DRY DIAMOND CORE BITS................................... 122 DRYWALL........................................................... 26, 27, 28
E
ELEMENT SCREWS....................................................... 40 ELH CLOUT....................................................................... 81 EPDM WASHERS............................................................ 34 EXPRESS NAILS...................................................... 61, 66 EXTENSION RODS..................................................... 121 EXTERNAL SELF-DRILLING...................................... 31 EYES..................................................................................... 55
F
FENCING CLIPS.............................................................. 97 FINE THREAD................................................... 26, 27, 28 FIRMAHOLD............................................................ 75, 76 FISHTAIL FRAME CRAMPS........................................ 95 FIXING BANDS............................................................... 95 FIXINGS & FASTENERS................................................ 54
FLANGE HEAD................................................................ 38 FLAT WOOD BITS....................................................... 108 FLOORING SCREW....................................................... 28 FOIL TAPE....................................................................... 142 FORGED EYES......................................................... 68, 69 FORGED EYES & HOOKS................................... 68, 69 FORGED HOOKS........................................................... 69 FORM A WASHER.......................................................... 51 FORM B WASHER.......................................................... 51 FORM C WASHER.......................................................... 51 FRAME ANCHORS........................................................ 64 FRAME CRAMPS............................................................ 95 FRAME FIXINGS............................................................. 64 FRAMING ANCHOR..................................................... 94 FRICTION TO METAL RETENTION SCREWS..... 44 FUEL CELLS...................................................................... 77
G
GALVANISED LOOSE NAILS...................... 81, 82, 83 GAS.............................................................................. 75, 76 GLASS FILM.................................................................. 142 GUN..................................................................................... 72
H
HAMMER FIXINGS........................................................ 64 HARD SURFACE FILM.............................................. 142 HARDWARE TO PLASTIC........................................... 41 HAZARD TAPE............................................................. 141 HEAVY DUTY TIMBER SCREWS.............................. 23 HEAVY RESTRAINT STRAPS...................................... 91 HEAVY SECTION STEEL...................................... 31, 33 HEXAGONAL SHANK FLAT WOOD BITS......... 108 HEX CONNECTOR NUT.............................................. 50 HEX DOME NUT............................................................ 51 HEX FULL NUTS............................................................. 50 HEX NUT.................................................................... 46, 47 HEX NUTS......................................................................... 48 HEX SERRATED FLANGE NUTS.............................. 50 HINGE COVER CAPS.................................................... 19 HINGE CUTTERS......................................................... 109 HOLE CLEANING BRUSHES..................................... 73 HOLESAWS.......................................................... 120, 121 HOOKS............................................................................... 55
I
IMPACT DRIVER BITS................................................ 136 IN-DEX........................................................................ 21, 22 INSULATION FIXINGS......................................... 63, 69 INSULATION RETAINING CLIPS............................. 96 INSULATION TAPE..................................................... 142 INTERNALLY THREADED SOCKETS...................... 73 INTERNAL SELF-DRILLING....................................... 30 IRONMONGERY.......................................................... 144
J
JAGGED PLASTERBOARD......................................... 83 JIGSAW BLADES............................................... 128, 129 JOBBER DRILLS............................. 110, 111, 112, 113
K
KEYLESS CHUCK............................................... 117, 118 KEYS.................................................................................. 117 KNOCK DOWN BLOCKS.......................................... 145
L
LAMINATED PADLOCKS......................................... 148 LASER WELDED BLADE........................................... 125 LIGHT RESTRAINT STRAPS....................................... 92 LIGHT SECTION STEEL................................ 31, 32, 33 LOCKS.............................................................................. 148 LONG JOBBER DRILLS............................................. 113 LOOPED CABLE.......................................................... 150 LOOSE BOLTS.................................................................. 68 LOOSE NAILS...... 78, 79, 80, 81, 82, 83, 84, 85, 86
151
INDEX M
M2 JOBBER DRILLS................................................... 111 MACHINE SCREWS....................................................... 40 MAGNETIC CATCHES............................................... 145 MASKING TAPE............................................................ 140 MASONRY DRILL BITS............................................. 106 MASONRY HANGERS.................................................. 88 MASONRY NAILS.......................................................... 86 MASONRY SCREW........................................................ 65 MENDING PLATES........................................................ 98 METAL CAVITY ANCHORS........................................ 59 METAL CONSTRUCTION SCREWS........................ 30 METAL FRAMING SCREWS....................................... 36 METAL HACKSAW BLADES................................... 131 METAL INSULATION FIXINGS................................. 63 METAL SPEED PLUGS................................................. 58 MINI..................................................................................... 89 MINI TIMBER HANGERS............................................. 89 MIRROR PLATES............................................................. 99 MIRROR SCREWS.......................................................... 19 MITRE SAW BLADES................................................. 133 MIXED PACKS.................................................................. 20 MIXED TRAYS.................................................................. 20 MIXING NOZZLES......................................................... 73 MODESTY BLOCKS.................................................... 145 MORTAR RAKING BLADES..................................... 126 MULTI-FIX......................................................................... 65 MULTI-FIX BOLT............................................................. 66 MULTI-FIX RESIN........................................................... 71 MULTI-FIX SCREWS...................................................... 65 MULTI-FUNCTIONAL HANGERS............................ 89 MULTI-PURPOSE DRILL BITS................................ 106 MULTI-PURPOSE SCREW....................... 9, 12, 13, 14
N
NAIL IN ANCHORS....................................................... 62 NAIL PLATES.................................................................... 94 NAILS. 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86 NON-EXPANSION ANCHOR.................................... 66 NOZZLES........................................................................... 73 NUT............................................................... 46, 47, 50, 51 NUTS.................................................................... 46, 48, 50 NYLON FIXINGS............................................................. 64 NYLON INSERT NUTS (TYPE P).............................. 50 NYLON INSERT NUTS (TYPE T)............................... 50 NYLON PLUGS................................................................ 24
O
ONE PIECE ADAPTORS............................................ 138 OVAL NAILS..................................................................... 79
P
PACKAGING TAPE...................................................... 141 PACKERS......................................................................... 100 PADLOCKS................................................. 148, 149, 150 PAN/BIDET FIXING KITS............................................. 56 PANEL PINS.............................................................. 78, 84 PENNY/REPAIR WASHER............................................ 52 PHILLIPS BUGLE HEAD.............................................. 26 PICTURE HOOK SET..................................................... 55 PILOT DRILL.................................................................. 123 PILOT DRILLS............................................................... 121 PILOT PINS..................................................................... 115 PILOT ROD..................................................................... 123 PLASTERBOARD FIXINGS......................................... 58 PLASTIC INSULATION FIXINGS.............................. 63 PLASTIC PLUGS...................................................... 61, 66 PLASTIC SLEEVES.......................................................... 73 PLASTIC SPEED PLUGS.............................................. 58 PLASTIDOME SCREW CAPS..................................... 19 PLUGLESS FRAME FIXING........................................ 65 POLYESTER RESIN......................................................... 71 POLYESTER STYRENE FREE RESIN........................ 71 POLYMER HEADED NAILS........................................ 77
152
POLYMER HEADED PINS........................................... 77 PRESSER POINT STAPLES.......................................... 83 PROFESSIONAL GUN.................................................. 72 PROFESSIONAL SDS PLUS HAMMER BITS............................................................. 102 PROJECTING BOLTS.................................................... 68 PROTECTIVE FILMS................................................... 142 PUMP.................................................................................. 73 PVC DOOR STOPS..................................................... 146 PVC DOOR WEDGES................................................ 146 PVC INSULATION TAPE........................................... 142 PVCU WINDOW FIXING............................................. 65
R
REBAR CUTTERS......................................................... 104 RECIPROCATING SAWS................................. 130, 131 RECTANGULAR PADLOCKS................................... 149 REINFORCED FRAME.................................................. 40 REPAIR WASHER............................................................. 52 REPLACEMENT PILOT PINS................................... 115 RESIN.................................................................... 71, 72, 73 RESIN ACCESSORIES................................................... 73 RESIN GUN....................................................................... 72 RESTRAINT STRAPS.............................................. 91, 92 RETAINING CLIPS.......................................................... 96 RETENTION SCREWS............................ 41, 42, 43, 44 ROLL FORGED JOBBER DRILLS........................... 112 ROOFING BOLT.............................................................. 47 ROOFING SCREWS....................................................... 32 ROUND CUP HOOKS................................................... 55 ROUNDHEAD TWIN THREADED........................... 18 ROUND LOST HEAD.................................................... 80 ROUND WIRE.......................................................... 79, 82
S
S2 DRIVER BITS............................................................ 137 SAFETY FRAME CRAMPS.......................................... 95 SANITARY FIXINGS....................................................... 56 SCREW BOLT................................................................... 66 SCREW EYES.................................................................... 55 SCREW HOOKS.............................................................. 55 SDS ADAPTORS.......................................................... 138 SDS MAX HAMMER BITS............................................................. 105 SDS MAX STEELS....................................................... 105 SDS PLUS......................................... 102, 103, 109, 117 SDS PLUS HAMMER BITS....................................... 103 SDS PLUS STEELS....................................................... 103 SDS SHANK REBAR CUTTERS.............................. 104 SEALANT & RESIN GUNS........................................... 72 SECURITY....................................................................... 148 SECURITY CHAIN....................................................... 150 SELA COVER AND WASHER..................................... 35 SELF-DRILL............................................................... 27, 28 SELF-DRILLING........................................ 28, 30, 31, 33 SELF-DRILLING SCREWS............................ 30, 31, 33 SELF-TAPPING................................................................ 20 SELF-TAPPING........................................................ 37, 38 SELF-TAPPING SCREWS..................................... 37, 38 SETS............................................................................. 48, 49 SETS (DIN 933)............................................................... 49 SETTING TOOL....................................................... 59, 67 SHERADISED LOOSE NAILS..................................... 84 SHIELD................................................................ 67, 68, 69 SHIELD ANCHORS................................................ 67, 68 SHIELD PROTECTIVE FILMS.................................. 142 SHIMS.............................................................................. 100 SINGLE THREADED...................................................... 15 SINTERED BLADE....................................................... 125 SKELETON GUN............................................................. 72 SLASH POINT.................................................................. 32 SLASH POINT ROOFING SCREWS........................ 32 SLEEVES............................................................................. 73 SOCKET DRIVERS....................................................... 138
SOLO........................................................................... 15, 16 SOLO SQUARE RECESS.............................................. 16 SPEED PLUGS.................................................................. 58 SPRING DOOR STOPS.............................................. 146 SPRING HEAD................................................................. 83 SPRING TOGGLES......................................................... 58 SPRING WASHER........................................................... 52 SQUARE CUP HOOKS................................................. 55 SQUARE NUT................................................................... 47 SQUARE PLATE WASHER........................................... 52 SQUARE TWIST....................................................... 81, 84 STEP DRILLS................................................................. 116 STITCHING........................................................................ 30 STRAIGHT BRADS......................................................... 76 STRETCHER PLATES..................................................... 99 STUB DRILLS................................................................. 114 STUDS................................................................................. 70
T
TAPE.............................................................. 140, 141, 142 TAPER DRIFT................................................................. 123 TEE PLATES...................................................................... 99 THREADED BAR..................................................... 48, 70 THREADED SOCKETS.................................................. 73 THROUGHBOLTS................................................... 67, 69 TILE & GLASS BITS..................................................... 107 TIMBER CONNECTORS............................................... 99 TIMBER HANGERS................................................ 89, 90 TIMBER SCREWS.................................................... 22, 23 TRIM SAW BLADES.................................................... 133 TRUSS CLIPS.................................................................... 93 TUBULAR LATCHES................................................... 144 TWIN THREADED.................................................. 17, 18 TWO PIECE ADAPTORS.......................................... 138
U
UNIVERSAL FRAMING ANCHOR........................... 94
V
V5 IMPACT DRIVER BITS......................................... 136 VELOCITY............................................................................ 8 VINE EYES......................................................................... 55 VINYLESTER STYRENE FREE..................................... 71
W
WALL STARTER KITS.................................................... 97 WALL TIES......................................................................... 96 WASHERS.................................................................. 51, 52 WATER PUMP............................................................... 107 WC & BIDET FIXING KITS........................................... 56 WEATHER BAR................................................................ 40 WEATHERPROOF PADLOCKS............................... 148 WEDGE ANCHOR.......................................................... 67 WELDED BLADES....................................................... 125 WINDOW BOARD TIES............................................... 96 WINDOW FABRICATION SCREWS......................... 40 WINDOW SCREWS....................................................... 40 WING NUT........................................................................ 51 WING TIP................................................................... 28, 33 WING TIP SELF-DRILLING SCREWS..................... 33 WIRE HANGER ANCHORS........................................ 62 WOOD AUGER BITS.................................................. 109
SUPPLIED BY:
ISSUE NO: 01