Concealed hinges
Concealed hinges Product guide
ST-i2 plus series ST-i2 plus 110, 2nd Generation
cam-adjustable door depth, ST assembly, Ø 35mm cup drilling Cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.21
9mm
110°
for wooden door
3.21
ST-i2 series
ST assembly, Ø 35mm cup drilling Angle and cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.23
9mm
110°
for wooden door
3.23
15mm
110°
for wooden door
3.23
ST-i2 110/30°, 2nd Generation
30°, 9mm
110°
for wooden door
3.25
ST-i2 110/45°, 2nd Generation
45°, 9mm
110°
for wooden door
3.27
45°, 18mm
110°
for wooden door
3.29
90°, 18mm
110°
for wooden door
3.31
ST-i2 110, 2nd Generation
ST-i2 110/90°, 2nd Generation
ST-i plus series ST-i plus 110
cam adjustable door depth, ST assembly, Ø 35mm cup drilling Cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.33
9mm
110°
for wooden door
3.33
ST-i series Angle and cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.35
9mm
110°
for wooden door
3.35
15mm
110°
for wooden door
3.35
ST-i 110/30°
30°, 9mm
110°
for wooden door
3.37
ST-i 110/45°
45°, 9mm
110°
for wooden door
3.39
45°, 18mm
110°
for wooden door
3.41
90°, 18mm
110°
for wooden door
3.43
ST-i 110
ST-i 110/90°
3.3
ST assembly, Ø 35mm cup drilling
ST plus 110
ST plus 110 Touch opening
ST plus 125
cam adjustable door depth, ST assembly, Ø 35mm cup drilling Cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.45
9mm
110°
for wooden door
3.45
0mm
110°
for wooden door
3.47
9mm
110°
for wooden door
3.47
0mm
125°
for wooden door
3.49
ST series
ST assembly, Ø 35mm cup drilling Angle and cranking
Opening angle
Cup type
0mm
110°
for wooden door
3.51
9mm
110°
for wooden door
3.51
15mm
110°
for wooden door
3.51
ST 110/-15°
-15°, 0mm
110°
for wooden door
3.53
ST 110/15°
15°, 0mm
110°
for wooden door
3.55
ST 110/24°
24°, 9mm
110°
for wooden door
3.57
ST 110/30°
30°, 9mm
110°
for wooden door
3.59
ST 110/45°
45°, 9mm
110°
for wooden door
3.61
45°, 18mm
110°
for wooden door
3.63
90°, 18mm
110°
for wooden door
3.65
0mm
110°
for aluminium frame door
3.67
0mm
165°
for wooden door
3.69
0mm
135°-165°
for wooden door
3.69
9mm
165°
for wooden door
3.69
for wooden door
3.71
ST 110
ST 110/90° ST 110 ST 170
ST for pie-cut corner cabinet ST mounting plates
Page
3.73
3.4
Concealed hinges
ST plus series
Basic-i2 series
slide-on assembly, Ø 35mm cup drilling Angle and cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.79
9mm
110°
for wooden door
3.79
15mm
110°
for wooden door
3.79
Basic-i2 110/30°, 2nd Generation
30°, 9mm
110°
for wooden door
3.81
Basic-i2 110/45°, 2nd Generation
45°, 9mm
110°
for wooden door
3.83
45°, 18mm
110°
for wooden door
3.85
90°, 18mm
110°
for wooden door
3.87
Basic-i2 110, 2nd Generation
Basic-i2 110/90°, 2nd Generation
Basic-i series
slide-on assembly, Ø 35mm cup drilling Angle and cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.89
9mm
110°
for wooden door
3.89
15mm
110°
for wooden door
3.89
Basic-i 110/30°
30°, 9mm
110°
for wooden door
3.91
Basic-i 110/45°
45°, 9mm
110°
for wooden door
3.93
45°, 18mm
110°
for wooden door
3.95
90°, 18mm
110°
for wooden door
3.97
Basic-i 110°
Basic-i2 110/90°
Basic series Angle and cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.99
9mm
110°
for wooden door
3.99
15mm
110°
for wooden door
3.99
Basic 110/30°
30°, 9mm
110°
for wooden door
3.101
Basic 110/45°
45°, 9mm
110°
for wooden door
3.103
45°, 18mm
110°
for wooden door
3.105
90°, 0mm
110°
for wooden door
3.107
90°, 18mm
110°
for wooden door
3.107
0mm
110°
for aluminium frame door
3.109
Basic 110
Basic 110/90°
Basic 110
3.5
slide-on assembly, Ø 35mm cup drilling
Basic 170
Basic for pie-cut corner cabinet
slide-on assembly, Ø 35mm cup drilling Cranking
Opening angle
Cup type
Page
0mm
165°
for wooden door
3.111
0mm
135°-165°
for wooden door
3.111
9mm
165°
for wooden door
3.111
0mm
90°
for wooden door
3.113
90°
for wooden door
3.115
Basic flap door hinge
3.117
Basic mounting plates
Miniprimat series Miniprimat 95
key-hole assembly, Ø 26mm cup drilling Angle and cranking
Opening angle
Cup type
Page
0mm
95°
for wooden door
3.121
9mm
3.121
15mm
3.123
18mm
3.123
Miniprimat 95/45°
45°, 18mm
95°
for wooden door
3.125
Miniprimat 95/90°
90°, 0mm
95°
for wooden door
3.127 3.127
90°, 18mm
Miniprimat 95
0mm
95°
for glass door
9mm
3.129
15mm
3.131
18mm
3.131 3.133
Miniprimat mounting plates
Special hinges
key-hole assembly Angle and cranking
Hinge Ø40
3.129
Opening angle
Cup type
Page
93°
for wooden door
3.135
Wide angle hinge and mounting plate
270°
3.141
Hinge for elements with refrigerator
110°
3.143
Accessories Page
Cover caps
3.145
Push latch
3.147
3.6
Concealed hinges
Basic series
Concealed hinges Information
How to achieve the desired door overlay? By choosing the hinge of appropriate cranking
1. Full overlay. Use a hinge with 0mm cranking.
By choosing the mounting plates of appropriate thickness
Concealed hinges with specific hinge arms are available for different door overlays. The most common overlays are:
Cabinet side Door
2. Half overlay for double doors. Use a hinge with 9mm cranking.
To achieve the desired overlay (x) while using a determined drilling distance (K), a mounting plate of appropriate
3. Inset door. Use a hinge with 15mm, 16mm or 18mm cranking.
thickness (D) must be chosen from the enclosed table.
D X 4
D
Door clearance and gap
K
x K
The door clearance (F>Fmin) and gap (Z) represent the minimal necessary space needed for the correct opening x and closing of the door. K The minimal required values V depend on Zthe cup drilling distance (K), door thickness (V)
K F
K F
3.7
6
P
7
L
E8
9
3 3 2 1 0
M
4 3 2 1 0 5
A S
3
2
1
0 D
and the type of hinge. The minimum clearance scale can be found in the catalogue. When using on double doors with one party-wall the door clearance must be twice as large (F>2Fmin). V 16 17 18 19 20
Z
V
5
21 E 22 L 3 0.3 0.5 0.7 1.0 1.31 1.7 3.5 P K 4 0.3 0.7 0.3 0.5 0.71 3.0 3.1 M A 5 1.0 1.3 1.7 3.5 3.01 3.1 3.0 F S Gap Z=0
MIN
Concealed hinges
Drilling patterns for hinge cups shown on the page 3.10 or on specific product pages for non-standard drillings.
How to mount the hinge on the door? The choice of hinge cup type depends on the material of which the door is made and the chosen assembly method. The hinge can be assembled on a wooden door by fixing it with
Easy-Fix Time saving system
chipboard or euro screws or inserted by machine.
After inserting the hinge correctly and fully, the cup is fixed by rotating the two screws clockwise (by 90°) with a PZ2 screwdriver. 90º
90º
90º
Screw fixing hinge cup
The hinge is fixed on the door with two prescribed screws.
Machine insertion ready hinge cup
Special dowels for machine insertion are pre-mounted. Two versions are available for 10mm or 8mm holes.
Pre-mounted expando dowels
Expanding dowels for intuitive positioning of the hinge cup. Available with Ø8mm dowels.
3.8
Concealed hinges Information
Drilling patterns for hinge cups shown on the next page or on specific product pages for non-standard drillings.
How to mount the hinge on the door? Hinge cup with pre-mounted euro screws
Hinge cup with pre-mounted chipboard screws
Glass door hinge cup
Aluminium frame screw-on hinge cup
3.9
The hinge is fixed on the door with two pre-mounted euro screws for 5mm holes. Where not specified otherwise, euro screws are 13mm long.
The hinge is fixed into one single hole on the glass door. Glass thickness must be between 4mm and 6mm.
The hinge is fixed onto a specific drilling on the aluminium frame with two screws.
The hinge is fixed on the door with two pre-mounted chipboard screws.
Concealed hinges
Drilling patterns for hinge cup Interaxis
Interaxis
Interaxis
45mm
48mm
38mm
6
9.5
Ø 35
Ø 26
Drilling pattern
Drilling pattern
Premounted chipboard screws
48
9.5 [3/8"]
Premounted Euro screws
45
10
]
9.5 [3/8"]
6
48
* Available upon special request > see page 0.3
9.5
6
38
26
48
35
/"
3 8
[1
5
Interaxis 42/11mm, 52/5.5mm*
35
45
Easy-fix system
Interaxis 42mm and 52mm are optionally available with some versions, on special request.
/8
10
[1¾"]
· Miniprimat series
7.5
6
5
Machine insertion ready
38
26
]
/"
3 8
[1
35
45
[1¾"]
35
Screw-on ready
Ø 35
35
Interaxis 38mm
38
Drilling pattern
8
ST-i2 plus series ST-i2 series ST-i plus series ST-i series ST plus series ST series Basic-i2 series Basic-i series Basic series
Type of hinge cup
35
Interaxis 45mm and 48mm · · · · · · · · ·
48
7.5
45
Other drilling patterns can be found on specific product pages.
7.5
5
38
26
Interaxis is the distance between two holes for fixing screws on the hinge cup.
7.5
3.10
Concealed hinges Information
Check the mounting plate drilling distance!
When fixing the mounting plate please check the drilling distance from side border. It may differ depending on mounting situation and mounting plate type. Some mounting plates can be used for both 28 or 37mm drilling distance simply by rotating.
How to fix the mounting plate on the cabinet side? The mounting plates can be fixed on cabinet side with various methods. Euro screws are most suitable for standard 32mm drillings. Mounting plates with pre-mounted chipboard
screws, spreading dowels or 10mm dowels for machine insertion, are also available.
Euro screws ready mounting plate
The mounting plate is fixed with two standard 6.3mm euro screws.
Mounting plate with pre-mounted euro screws
Euro screws for 5mm holes are pre-mounted on the mounting plate. Different screw lengths available.
Machine insertion ready mounting plate
Dowels for machine insertion in 10mm holes are pre-mounted on the mounting plate.
Mounting plate with pre-mounted expanding dowels
Expanding dowels for 5mm holes are pre-mounted on the mounting plate. Two lengths available: 7.5mm and 10.5mm.
Chipboard screws ready mounting plate
3.11
Mounting plate with pre-mounted chipboard screws
The mounting plate is fixed with two prescribed chipboard screws or equivalent.
The mounting plate is fixed with two pre-mounted chipboard screws.
Concealed hinges
How to assemble the hinge and the mounting plate? ST time saving system · · · · ·
S T-i2 plus series S T-i2 series S T-i series S T plus series S T series
The door is assembled on the cabinet side simply by fixing the two hooks under the hinge arm on the outer part of the mounting plate and pressing gently on the rear part of the hinge arm.
For disassembly press the button on the rear of the hinge arm.
The hinge is assembled by sliding the hinge arm over the mounting plate. The lower part of the horizontal set-up screw must fit correctly into the groove on the mounting plate. After
adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.
The hinge is assembled on the mounting plate by inserting the fixing screw on the appropriate hole on the hinge arm. After adjusting the door
depth, the mounting procedure is finished by tightening the fixing screw.
assembly
disassembly
Slide-on system · B asic-i2 series · B asic-i series · B asic series
Key-hole system · M iniprimat series · S pecial hinges
3.12
Concealed hinges Information
For the furniture user’s safety please use the appropriate number of hinges so that the door height or weight does not exceed that shown below.
How many hinges per door? Check the enclosed specifications for the number of required hinges per door by considering both door height and weight. In case of doubt please contact Titus or your local distributor.
Concealed hinges with Ø 35mm hinge cup diameter · · · ·
S T plus series S T series B asic series S pecial hinges
height (cm)
250
5
200
4
150
3
100 50
weight (kg)
· · · · · ·
S T-i2 plus series S T-i2 series B asic-i2 series S T-i plus series S T-i series Basic-i series
2 4-7
8-12 13-16 17-22
height (cm)
250
5
200
4
150
3
100 50
weight (kg)
Concealed hinges with Ø 26mm hinge cup diameter · M iniprimat series
2 4-7
8-12 13-16 17-22
height (cm)
250
5
200
4
150
3
100
3.13
50
2
weight (kg)
2-4
4-6
6-8
8-10
Hinges with integrated damping can be combined with non-damped hinges from standard hinge range. A trial mounting is always recommended. Please contact Titus for further technical assistance.
Concealed hinges
Adjustment range can be found on the product pages.
Side adjustment The side adjustment is indispensable to align the door with the side of the cabinet thus allowing perfect lifetime opening and closing of the door.
By rotating the appropriate screw · · · · · · · · ·
S T-i2 plus series S T-i2 series S T-i plus series S T-i series S T plus series S T series B asic-i2 series B asic-i series B asic series
The side adjustment is made by rotating the appropriate screw on the hinge arm.
Adjustment range
By temporarily releasing the fixing screw · M iniprimat series · W ide angle hinge
For the side adjustment: 1. Release the fixing screw 2. M ake the necessary adjustment by rotating the appropriate screw 3. Tighten the fixing screw Without releasing the fixing screw no side adjustment is possible.
Adjustment range
3.14
Concealed hinges Information
ST-i2 plus, ST-i2, ST-i plus, ST-i, ST plus and ST series with cam adjustable mounting plate
+2
-2
·
The height adjustment is made by rotating the cam adjuster on the mounting plate.
-2-2
By rotating the cam adjuster
-2
Height adjustment is necessary to achieve perfect vertical door position that emphasises the accuracy of manufacture.
+2
+2
Height adjustment
Manual adjustment by releasing the adjustment screw
-2 +2
For height adjustment the adjustment screw has to be temporarily released during manual adjustment.
+2
+2
-2
· ST-i2 plus, ST-i2, ST-i plus, ST-i, ST plus and ST series with horizontal mounting plate
3.15
-2
-2
· S T-i2 plus, ST-i2, ST-i plus, ST-i, ST plus and ST series without cam-adjustable cruciform mounting plates · B asic series · M iniprimat series · W ide angle hinge
For height adjustment the two mounting plate fixing screws have to be temporarily released while making the manual adjustment. +2
By releasing the fixing screws of mounting plate
Concealed hinges
Adjustment range can be found on the product pages.
Depth adjustment The system enables easy adjustment of the door depth to assure that the door fits well on the side of the cabinet.
By rotating the cam adjuster · S T-i2 plus series · S T-i plus series · S T plus series
The adjustment is made by rotating the cam adjuster on the hinge arm.
+/-1.5
By releasing the fixing or adjustment screw · ST-i2 plus series ·S T-i series ·S T series ·B asic-i series ·B asic series · Miniprimat
The depth adjustment is made by temporarily releasing the adjustment screw (ST series) or fixing screw (Basic series). After the adjustment is made the screw has to be re-tightened.
Adjustment range
+/-1.5
3.16
Concealed hinges Information
Titus recommends! Most of Titus hinges can be combined with soft closing devices giving silent closing motion. >see pages 2.11-2.16 for details
Soft closing devices can not be used with free-swinging door hinges.
Door closing systems There are three types of door closing systems:
Concealed hinges with limited self-closing angle · · · · · · · · ·
S T-i2 plus series ST-i2 series ST-i plus series ST-i series ST plus series ST series Basic-i2 series Basic-i series Basic series
Two-positions self-closing concealed hinges · Miniprimat series
Free-swinging door hinges * · all series
* Available upon special request > see page 0.3
3.17
The self-closing angle is the point from which the door will close by itself, without user assistance. The mechanism starts closing the door from a 14° to 25° angle, depending on the concealed hinge type. From that point to the maximum opening angle the door remains in an open position.
The door can only be in two positions: closed or fully opened. The closing mechanism does not allow intermediate open door positions unless the door is held.
Optionally most of Lama concealed hinges can be supplied without selfclosing mechanism. These hinges are not presented in this catalogue but may be ordered upon request. Please contact Lama or your distributor for item order numbers and technical assistance.
self - closing free - swinging
Titus damping solutions Titus damping solutions
Concealed hinges
Hinges with integrated damping
Key design choices Key design choices Damping in the hinge cup Damper is positioned transversal Damper is transversal on the Damping in the hinge cup onpositioned the hinge cup hinge cup
· Allows for an easy and quick various hinge · Allows forintroduction an easy andofquick introduction ST ‘snap-on’ and Basic of variousversions: hinge versions: ST ‘snap-on’ and Basic‘slide-on’ ‘slide-on’with withdifferent differenthinge hingearm arm crankings and angles crankings and angles · Standard hinge cuphinge drilling · Standard cupdepths: drilling depths: requires no changes in drillingsinfor hinge requires no changes drillings cup for hinge cup · Standard mountingmounting plates plates · Standard
to 'tune' to performance for all Adjustable damping 'tune' performance Adjustable damping force force FlexibilityFlexibility for all applications applications
Optimal damping various door · Optimal· damping on variousondoor weights weights and sizesand sizes Intuitive and quick adjustment · Intuitive· and quick adjustment · Easily accessible adjustment · Easily accessible adjustment button button
Adjustable damping zone and force
Titus hydraulic damper Titus hydraulic damper
Titus hydraulic damper, designed and produced Titus hydraulic damper, in-house designed and produced in-house · Reliable and consistent · Reliable and consistent life-long damping life-long damping · Minimum damper rebounce · Minimum damper rebounce · Dampers’ consistency over highover volume · Dampers’ consistency high production runs production assured runs assured volume
3.18
Adjustment of the damping force ST-i ‘snap-on’ hinges
To decrease or to increase the damping
force, change to position of the Titus damping solutions Basic-i ‘slide-on’ hinges damping reduction switch. The damping force is factory pre-set to Hinges with integrated damping the maximum damping value.
Adjustment of the damping force ST-i ‘snap-on’ hinges Basic-i ‘slide-on’ hinges
To decrease or to increase the damping force, change to position of the damping reduction switch. The damping force is factory pre-set to the maximum damping value.
The damping reduction switch in a pre-set position
To decrease the damping force Adjustment of the damping
1. Lift the damping activator. 2. Slide the damping reduction switch to opThe damping positereduction position. To decrease or to increase the damping, switch in a pre-set change the position of the damping position
ST-i plus series ST-i series Basic-i series
reduction switch. Hinges are factory 2 1 pre-set to the maximum damping value.
g solutions
To increase the damping force, slide the damping reduction switch back to the factory pre-set To decrease the damping forceposition. 1. Lift the damping activator. 2. Slide the damping reduction switch to opposite position.
The damping reduction switch adjusts the force of2 damping.1 Example shows the damping force change in case of To increase the damping force, slide the damptwo hinges on door. ing reduction switch back to the factory pre-set
Damping force change
ces
position.
The damping reduction switch in a pre-set position.
Damper is positioned transversal on the hinge cup The damping reduction switch Damping force change
To decrease the damping 1. Lift the damping activator. 2. Slide the damping reduction switch to opposite position.
Hinge the setdamping, at the maximum damping value To increase slide the damping Hinge set at the lowest damping value reduction switch back to the factory pre-set position.
adjusts the force of damping.
· Allows for an easy and quick introduction Example shows the of various hinge versions: ST ‘snap-on’ Damping damping force change inforce case change of Hinge set at the maximum damping value and Basic ‘slide-on’ with different hinge two hinges on door. arm crankings and angles Hinge set at the lowest damping value The damping reduction switch Hinge set at the maximum damping value · Standard hinge cup drilling depths: adjusts the damping. Example requires no changes in drillings for hinge shows the damping change in caseHinge set at the lowest damping value cup of two hinges on door. 100% 85% · Standard mounting plates
100%
ST-i2 plus series
ST-i2performance series Flexibility to 'tune' for all applications Basic-i 2 series
The damping action can be adjusted to fit different door weights which enables perfect door functioning. 100%
· Optimal damping on various door weights and sizes · Intuitive and quick adjustment · Easily accessible adjustment button
Adjustable Adjustabledamping dampingzone zoneand force
3.19
85%
85%
70%
70%
damping force
damping force
Turn towards '+' to increase and '-' to decrease the damping
70%
damping force
Concealed hinges
How to mount ST-i2 / Basic-i2 hinges? 路 S T-i2 plus series 路 S T-i2 series 路 Basic-i2 series
Insert Basic-i 2 / ST-i 2 hinge into the hinge cup hole.
Fix the hinge cup.
Snap the soft closing mechanism to the hinge cup.
3.20