Basic-i2 110 2nd Generation
For wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Technical details
Cranking
28
13
Ø 35
Ø 35
Item number
Item number
954-0688-050 95-0800-050
13
0mm
Cup type
6
9.5
45
43.5
Drilling patterns for hinge cups > see page 3.10
67.6
K
100 Pcs
Made of steel and plastic
Cranking
28
954-0689-050 954-0801-050
13
9mm
13
K
43.5
67.6
Drilling patterns for hinge cups > see page 3.10
100 Pcs
Made of steel and plastic
Cranking
28
13
954-0690-050 954-0802-050
13
15mm
K
43.5
67.6
Drilling patterns for hinge cups > see page 3.10
100 Pcs
Made of steel and plastic
Mounting plates
Steel mounting plates > see page 3.117
6.9
3.5 15
6.9
Zinc diecast mounting plates > see page 3.117
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
3.79
Screw-on ready < screws
Damping adjustment
Door adjustment
Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping
For further explanation > see page 3.19
17.8 D
x 10 11 12 13 14 1 15 16 17 18
17.8
Drawings show x application on D=0mm V thick mounting plate 7
V
61.5
37
z
K
F>Fmin
K
37
z
K
37
37
61.5
D
x 7
Mounting plate thickness table For further explanation > see page 3.7
Mounting plate drilling distance
S
F>Fmin
26.7
61.5
37
K
z
37
z61.5
D
S
K
xV
37
Drawings show application on D=0mm thick mounting plate
16
16
S
1 0
4 6 5 4 3 1
2 1 0
5 6 5 4 1
3 2 1 0 D
3 6 5 4 3 1 K 4 6 5 4 1 5 9 6 5 1
1 5 6 7 8 9 2 1 0 3 2 1 0 4 3 2 1 0 D
35.7
V 16 17 18 19 20 1 21 22
35.7 D
37
K
61.5
D
S
37 61.5
V
37
F>2Fmin
x
F>2Fmin
3 6 5 4 3 2 1
x 0 1 2 3 4
D
26.7S
Depth adjustment +4/-0mm
For further explanation > see pages 3.14 - 3.16
Mounting details S
Height adjustment +2/-2mm
Concealed hinges
Side adjustment +3/-0.5mm
K
F>Fmin
Drawings show F>Fmin application on D=3mm thick mounting plate
V
25 V 25
height (cm)
3 4
4 3 3 3 4 4 1
4 5
5 4 4 4 5 5 1
5 6 D
V 16 17 18 19 20 1 21 22
250
5
200
4
150
3
100
weight (kg)
3 2 2 2 3 3 1
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning
50
37+V 37+V
K
2 4-7
8-12 13-16 17-22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.80
Basic-i2 110/30° 2nd Generation
30° angled application for wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Technical details
Cranking
9mm
Cup type 13
Ø 35 Item number
954-0691-650 954-0803-650
13
28
Item number
6
9.5
45
43.5
Drilling patterns for hinge cups > see page 3.10
67.6
K
Cup made of steel and plastic, arm made of zinc
100 Pcs
Steel mounting plates > see page 3.117
6.9
3.81
3.5 15
6.9
Zinc diecast mounting plates > see page 3.117
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
Mounting plates
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
Screw-on ready < screws
Damping adjustment
Door adjustment
Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping
For further explanation > see page 3.19
Mounting plate drilling distance
27
L
L
K
K
V
V
L
x
x
L
K
3 9 3 2 1 0 4 9 3 1 5
9
1
2 0 3 2 0 D
P
P
Drawings show application on D=3mm 38.5 thick mounting plate
L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9
S
37
63.5
D
27
45°
D 27
D
S
V
K
K 30°
19
56.5
9.5
30°
30
55
30
55
15
P 2.5 3.5 4.5 8.5 9.51 10.5 11.5 12.5 13.5
K
S
K P
9.5
30
3 9 3 2 1
1 0
4 9 3 1
2 1 0
5
9
1 3 2 1 0 D
30
73
D=18
P
45°
Drawings show application on D=3mm thick mounting plate
48
59
59
30°
30°
9.5
9.5
Mounting plate thickness table For further explanation > see page 3.7
x 2 3 4 9 10 1 11 12 13 14 15
S
S
D
D
Depth adjustment +4/-0mm
For further explanation > see pages 3.14 - 3.16
Mounting details 27
Height adjustment +2/-2mm
Concealed hinges
Side adjustment +3/-0.5mm
K 19
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning height (cm) 250
5
200
4
150
3
100 50
weight (kg)
n
i Fm
F>
2 4-7
8-12 13-16 17-22
V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.82
Basic-i2 110/45° 2nd Generation
45° angled application for wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Technical details
Cranking
13
9mm
Item number
6
9.5
45
Ø 35 Item number
954-0692-650 954-0804-650
13
28
Drilling patterns for hinge cups > see page 3.10
43.5
67.6
K
Cup made of steel and plastic, arm made of zinc
100 Pcs
Steel mounting plates > see page 3.117
6.9
3.5 15
6.9
Zinc diecast mounting plates > see page 3.117
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
Mounting plates
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
3.83
Screw-on ready < screws
Damping adjustment
Door adjustment
Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping
For further explanation > see page 3.19
D
D
L
L
K
K 45°
45°
4.8
4.8
x
x
V
V
L
Drawings show application on D=3mm thick mounting plate S
D
28.5
23
K 45° V
4.8
L
P
P
Mounting plate thickness table For further explanation > see page 3.7
x 11.5 12.5 13 13.5 141 14.5 15 15.5 16 16.5 17 18
S
58
S
48
58
Mounting plate drilling distance
28.5
Depth adjustment +4/-0mm
For further explanation > see pages 3.14 - 3.16
Mounting details 28.5
Height adjustment +2/-2mm
Concealed hinges
Side adjustment +3/-0.5mm
K
3
3
2
1 1 0
4 3 21 5
3
1 0
1
2
1
D
0
L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3
P 9 9.5 10 10.5 11 11.5 12 12.5 13.5 K
3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D
P
Drawings show application on D=3mm thick mounting plate
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning height (cm)
V 16 17 18 19 20 1 21 22
250
5
200
4
150
3
100 50
weight (kg)
2 4-7
8-12 13-16 17-22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.84
Basic-i2 110/45° 2nd Generation
45° angled application for wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Technical details
Cranking
13
18mm
Item number
6
9.5
45
Ø 35 Item number
954-0693-650 954-0805-650
K
43.5
Drilling patterns for hinge cups > see page 3.10
67.6
13
28
Cup made of steel and plastic, arm made of zinc
100 Pcs
Hinge cup screws If not pre-mounted
Mounting plates
Steel mounting plates > see page 3.117
6.9 15 6.9
Zinc diecast mounting plates > see page 3.117
3.5
Legend of hinge cup symbols
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
3.85
Screw-on ready < screws
Door adjustment
Damping adjustment
Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping
For further explanation > see pages 3.14 - 3.16
For further explanation > see page 3.19
Mounting details
Mounting plate drilling distance
D
S
38.5
D
S
37
45° 45°
15
K K
V
Mounting plate thickness table For further explanation > see page 3.7
37
63.5 63.5
38.5
Depth adjustment +4/-0mm
Concealed hinges
Height adjustment +2/-2mm
Side adjustment +3/-0.5mm
37
K
3 0 4 1 5 2 D
37
V
15
Drawings show application on D=0mm thick mounting plate 19
56.5
19
48
48 73 73
D=18D=18
56.5
19
45° 45°
K
48
K
48
19
Drawings show application on D=18mm thick mounting plate
Recommended number per door and positioning
Door clearance For further explanation > see page 3.7
height (cm) 250
5
200
4
150
3
100 50
weight (kg)
n
i Fm
F>
2 4-7
8-12 13-16 17-22
V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.86
Basic-i2 110/90° 2nd Generation
For wooden door cabinets with blind panels
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Cup or mounting plate type
Technical details
Cranking
18mm
Item number
Ø 35 Item number
954-0694-650 954-0806-650
13
13
28
Ø 35
6
9.5
45
K
43.5
67.6
Drilling patterns for hinge cups > see page 3.10
100 Pcs
Cup made of steel and plastic, arm made of zinc
Blind panel mounting plate
244-0810-650 15
244-0P28-650
This mounting plate can be used only with Basic-i 110/90° hinges. Information about mounting plate symbols > see page 3.118
200 Pcs
Made of zinc
Mounting plates
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
6.9
These hinges can only be used with blind panel mounting plates
3.5 15
6.9
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
3.87
Screw-on ready < screws
Damping adjustment
Door adjustment
Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping
For further explanation > see page 3.19
Mounting details
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting plate drilling distance
K F
9
min22
32
9
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning height (cm)
V 16 17 18 19 20 1 21 22
250
5
200
4
150
3
100 50
weight (kg)
2 4-7
8-12 13-16 17-22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2 FMIN Gap Z=0
For further explanation > see page 3.13
3.88
Basic-i 110
For wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Technical details
Cup type
Cranking
12
0mm K
6
9.5
45
Ø 35
Ø 35
Item number
Item number
954-0B97-050
954-0C01-050
Drilling patterns for hinge cups > see page 3.10
43.5
62.8
31.5
200 Pcs
Made of steel and plastic
Cranking
12
9mm K
43.5
954-0B98-050
954-0C02-050
Drilling patterns for hinge cups > see page 3.10
62.8
31.5
Made of steel and plastic
200 Pcs Cranking
12
15mm K
43.5
954-0B99-050
954-0C03-050
Drilling patterns for hinge cups > see page 3.10
62.8
31.5
Made of steel and plastic
200 Pcs
Hinge cup screws If not pre-mounted
Mounting plates
Steel mounting plates > see page 3.117
6.9
3.5 15
Zinc diecast mounting plates > see page 3.117
6.9
Legend of hinge cup symbols
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
3.89
Screw-on ready < screws
ch in a pre-set position Damping adjustment
Door adjustment
To increase or decrease the damping, change the position of the damping reduction switch.
switch to op-
1
lide the dampfactory pre-set For further explanation > see page 3.19
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
2
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
witch ng.
case of MountingHinge details
Hinge 17.8 set at the lowest damping value D
D
61.5
37
F>Fmin
K
K
61.5
37 z
K
x
Drawings show x application on D=0mm V thick mounting plate 7
V
x 10 11 12 13 14 1 15 16 17 18
17.8
S
37
37
z
S
7
Mounting plate thickness table For further explanation > see page 3.7
Mounting plate set at the maximum damping value drilling distance
F>Fmin
26.7
26.7S 100% D
K
K
x
V
37
Drawings show application on D=0mm thick mounting plate
16
16
S
4 6 5 4 3 1
2 1 0
5 6 5 4 1
3 2 1 0 D
3 6 5 4 3 1 K 4 6 5 4 1 5 9 6 5 1
1 5 6 7 8 9 2 1 0 3 2 1 0 4 3 2 1 0 D
35.7
V 16 17 18 19 20 1 21 22
35.7 D
37
K K
61.5
D
S
37 61.5
V
37
F>2Fmin
x
F>2Fmin
1 0
x 0 1 2 3 4
damping force
61.5
37
z61.5
70%
z
37
S
D 85%
3 6 5 4 3 2 1
F>Fmin
Drawings show F>Fmin application on D=3mm thick mounting plate
V
25 V 25
height (cm)
3 4
4 3 3 3 4 4 1
4 5
5 4 4 4 5 5 1
5 6 D
V 16 17 18 19 20 1 21 22
250
5
200
4
150
3
100
weight (kg)
3 2 2 2 3 3 1
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning
50
37+V 37+V
K
2 4-7
8-12 13-16 17-22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.90
Basic-i 110/30°
30° angled application for wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Technical details
Cup type
Cranking
12
9mm
6
9.5
45
Ø 35
Item number
Item number
954-0153-650
954-0147-650
Drilling patterns for hinge cups > see page 3.10
K
43.5
62.8
31.5
Cup made of steel and plastic, arm made of zinc
200 Pcs Mounting plates
Steel mounting plates > see page 3.117
6.9
3.91
3.5 15
6.9
Zinc diecast mounting plates > see page 3.117
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
Screw-on ready < screws
ch in a pre-set position Damping adjustment
Door adjustment
To increase or decrease the damping, change the position of the damping reduction switch.
switch to op-
slide the dampfactory pre-set
1
For further explanation > see page 3.19
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
2
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
witch ng.
case of Mounting details 27
27
Mounting plate
Hinge set at the maximum damping drillingvalue distance Hinge set at the lowest damping value
x 2 3 4 9 10 1 11 12 13 14 15
S
S
D
L
L
30°
30°
V
D
S
85%
4 9 3 1 5
9
2 0
1
3 2 0 D
L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 for thickness D=3 damping 70% L=34 L=31 for thickness D=9
force
37
63.5
100%
3 9 3 2 1 0
P
P
Drawings show application on D=3mm 38.5 thick mounting plate
L
L
x
x
V
9.5
9.5
K
K
K
27
45°
D 27
D
S
V
K
K 30°
19
56.5
9.5
30°
30
55
30
55
15
P 2.5 3.5 4.5 8.5 9.51 10.5 11.5 12.5 13.5
K
S
K P
9.5
30
3 9 3 2 1
1 0
4 9 3 1
2 1 0
5
9
1 3 2 1 0 D
30
73
D=18
P
45°
Drawings show application on D=3mm thick mounting plate
48
59
59
D
Mounting plate thickness table For further explanation > see page 3.7
K 19
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning height (cm) 250
5
200
4
150
3
100 50
weight (kg)
n
i Fm
F>
2 4-7
8-12 13-16 17-22
V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.92
Basic-i 110/45°
45° angled application for wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Technical details 12
Cranking
9mm K
43.5
Item number
954-0154-650
6
9.5
45
Ø 35 Item number
954-0148-650
Drilling patterns for hinge cups > see page 3.10
62.8
31.5
200 Pcs
Cup made of steel and plastic, arm made of zinc
Mounting plates
Steel mounting plates > see page 3.117
6.9
3.5 15
6.9
Zinc diecast mounting plates > see page 3.117
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
3.93
Screw-on ready < screws
tch in a pre-set position Damping adjustment
Door adjustment
To increase or decrease the damping, change the position of the damping reduction switch.
switch to op-
1
slide the dampfactory pre-set For further explanation > see page 3.19
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
2
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
witch ing.
case of Mounting details 28.5
Hinge set at the damping value D lowest S D
L
L
58
S
K
K 45째
45째
4.8
4.8
x
V
V
x
L
Drawings show application on D=3mm 85% thick mounting plate
100%
S
D
28.5
23
K 45째 V
4.8
L
P
P
48
58
28.5
Mounting plate
Mounting plate thickness table For further explanation > see page 3.7
Hinge set at the maximumdrilling damping value distance
x 11.5 12.5 13 13.5 141 14.5 15 15.5 16 16.5 17 18 K
3
3
2
4 3 21
1 1 0
5
3
1 0 1
2
1
0
D
L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3
70%
damping force
P 9 9.5 10 10.5 11 11.5 12 12.5 13.5 K
3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D
P
Drawings show application on D=3mm thick mounting plate
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning height (cm)
V 16 17 18 19 20 1 21 22
250
5
200
4
150
3
100 50
weight (kg)
2 4-7
8-12 13-16 17-22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.94
Basic-i 110/45°
45° angled application for wooden doors
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Technical details
Cranking
12
18mm
Item number
954-0158-650
6
9.5
45
Ø 35 Item number
954-0168-650
Drilling patterns for hinge cups > see page 3.10
K
43.5
62.8
31.5
200 Pcs
Cup made of steel and plastic, arm made of zinc
Mounting plates
Steel mounting plates > see page 3.117
6.9
3.95
3.5 15
6.9
Zinc diecast mounting plates > see page 3.117
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
Screw-on ready < screws
ch in a pre-set position Damping adjustment
Door adjustment
To increase or decrease the damping, change the position of the damping reduction switch.
switch to op-
1
Depth adjustment +4/-0mm
For further explanation > see page 3.19
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate thickness table For further explanation > see page 3.7
Concealed hinges
slide the dampfactory pre-set
2
Height adjustment +2/-2mm
Side adjustment +3/-0.5mm
witch ng.
case of Mounting plate Hinge set at the maximum damping value drilling distance
Hinge set at the lowest damping value D
S
38.5
D
S
37
37
63.5 63.5
38.5
45째 45째
15
K
37
K
V
K
3 0 4 1 5 2 D
37
V
15
Drawings show 100% application on D=0mm thick mounting plate 19
56.5
19
70%
damping force
48
48 73 73
D=18D=18
56.5
85%
19
45째 45째
K
48
K
48
19
Drawings show application on D=18mm thick mounting plate
Recommended number per door and positioning
Door clearance For further explanation > see page 3.7
height (cm) 250
5
200
4
150
3
100 50
weight (kg)
n
i Fm
F>
2 4-7
8-12 13-16 17-22
V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
For further explanation > see page 3.13
3.96
Basic-i 110/90°
For wooden door cabinets with blind panels
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on
110°
Interaxis
Interaxis
45 mm
48 mm 48
Cup or mounting plate type
Technical details
Cranking
K
43.5
Item number
954-0159-650
12
18mm
Ø 35
6
9.5
45
Ø 35 Item number
954-0149-650
Drilling patterns for hinge cups > see page 3.10
62.8
31.5
200 Pcs
Cup made of steel and plastic, arm made of zinc
Blind panel mounting plate
244-0810-650 15
244-0P28-650
This mounting plate can be used only with Basic-i 110/90° hinges. Information about mounting plate symbols > see page 3.116
200 Pcs
Made of zinc
Mounting plates
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
6.9
These hinges can only be used with blind panel mounting plates
3.5 15
6.9
820-6308-050 10000 Pcs
3.5 15
Accessories Cover caps for hinge arm > see page 3.145
3.97
Screw-on ready < screws
ch in a pre-set position Damping adjustment
Door adjustment
To increase or decrease the damping, change the position of the damping reduction switch.
switch to op-
1
slide the dampfactory pre-set For further explanation > see page 3.19
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
2
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
witch ng.
case of Mounting details
Mounting plate
Hinge set at the maximum damping drilling value distance Hinge set at the lowest damping value
K F
9
min22
100%
85%
70%
damping force
32
9
Door clearance For further explanation > see page 3.7
Recommended number per door and positioning height (cm) 250
5
200
4
150
3
100 50
weight (kg)
n
i Fm
F>
2 4-7
8-12 13-16 17-22
V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2 FMIN Gap Z=0
For further explanation > see page 3.13
3.98
Basic 110
For wooden doors
110° Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Cranking
0mm
6
9.5
45
Ø 35
Item number
Item number
248-0G54-050
248-0G49-050
248-0G79-050
248-0K40-050
Drilling patterns for hinge cups > see page 3.10
200 Pcs
Made of steel
Cranking
9mm
248-0G55-050
248-0G50-050
248-0G80-050
248-0K76-050
Drilling patterns for hinge cups > see page 3.10
200 Pcs
Made of steel 248-0G56-050 248-0G51-050
Cranking
15mm
248-0G81-050 248-0L04-050 Drilling patterns for hinge cups > see page 3.10
200 Pcs
Made of steel Hinge cup screws If not pre-mounted
Mounting plates Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117
3.99
6.9
3.5 15
6.9
3.5 15
Legend of hinge cup symbols
820-6308-050 10000 Pcs
Screw-on ready < screws
Machine insertion ready
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting details
x 10 11 12 13 14 1 15 16 17 18
17.8 D
S
17.8
7
61.5
61.5
37
61.5 z
z
37
D
K V
x
37
F>2Fmin
2 1 0
5 6 5 4 1
3 2 1 0 D
37
1 5 6 7 8 9
3 6 5 4 3 1 K 4 6 5 4 1 5 9 6 5 1
2 1 0 3 2 1 0 4 3 2 1 0 D
Drawings show application on D=0mm thick mounting plate
16
S
D
K
37
D
K
V 16 17 18 19 20 1 21 22
35.735.7
61.5
S
61.5 37
K 16
4 6 5 4 3 1
x 0 1 2 3 4
26.7
F>2Fmin
x V
1 0
Drawings show V application on D=0mm thick mounting plate
26.7 S D
S
3 6 5 4 3 2 1
F>Fmin
x
V
37
z
K
F>Fmin
x
K
37
z
K
37
37
D 61.5
S
7
Mounting plate thickness table For further explanation > see page 3.7
Mounting plate drilling distance
37+V37+V F>Fmin F>Fmin V
25 25
K
3 2 2 2 3 3 1
3 4
4 3 3 3 4 4 1
4 5
5 4 4 4 5 5 1
5 6 D
V
Drawings show application on D=3mm thick mounting plate
Soft closing systems Glissando TL > see page 2.11
Glissando CR > see page 2.15
Door clearance For further explanation > see page 3.7
Accessories Cover caps for hinge arm > see page 3.145
Push latch > see page 3.147
V 16 17 18 19 20 1 21 22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
3.100
Basic 110/30°
30° angled application for wooden doors
110° Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Cranking
9mm
Item number
6
9.5
45
Ø 35 Item number
248-0G57-050
248-0G52-050
248-0G82-050
248-0L72-050
Drilling patterns for hinge cups > see page 3.10
200 Pcs
Cup made of steel, arm made of zinc
Mounting plates Steel mounting plates > see page 3.117
6.9
3.5 15
Zinc diecast mounting plates > see page 3.117
3.101
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
6.9
3.5 15
820-6308-050 10000 Pcs
Screw-on ready < screws
Machine insertion ready
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate drilling distance
27
27
x 2 3 4 9 10 1 11 12 13 14 15
S
S
D
K
L
30°
30°
V
V
9.5
9.5
K
K
Drawings show application on D=3mm
D
S
27
27 15
K
K
K
V
V D
S
55
73 48
48
D=18 73
30°
D=18
1
3 2 0 D
S
3 9 3 2 1
1 0
4 9 3 1
2 1 0
5
9
1 3 2 1 0 D
19 30°
9.5
9.5
9
30
30
1956.5
56.5
P 2.5 3.5 4.5 8.5 9.51 10.5 11.5 12.5 13.5
55
D
5
2 0
L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9
S
37
63.5
63.5
D
45°
45°
15
4 9 3 1
P
P
38.5 38.5 thick mounting plate
3 9 3 2 1 0
L
L
x
x
37
L
59
59
D
Mounting plate thickness table For further explanation > see page 3.7
K P
P
K 30
30
45°
45°
Drawings show application on D=3mm K K thick mounting plate 19
19
Soft closing systems Glissando TL > see page 2.11
Accessories Cover caps for hinge arm > see page 3.145
Door clearance For further explanation > see page 3.7 n
i Fm
V 16 17 18 19 20 1 21 22
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
3.102
Basic 110/45°
45° angled application for wooden doors
110° Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Cranking
9mm
6
9.5
45
Ø 35
Item number
Item number
248-0L32-650
248-0L27-650
248-0N38-050
248-0L71-050
Drilling patterns for hinge cups > see page 3.10
Cup made of steel, arm made of zinc
200 Pcs Mounting plates
Hinge cup screws If not pre-mounted
Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117
6.9
6.9
3.5 15
3.103
3.5 15
Legend of hinge cup symbols
820-6308-050 10000 Pcs
Screw-on ready < screws
Machine insertion ready
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on
Depth adjustment +4/-0mm
Concealed hinges
Height adjustment +2/-2mm
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate drilling distance
S
K
L
L
58
D
x 11.5 12.5 13 13.5 141 14.5 15 15.5 16 16.5 17 18
45°
45°
4.8
4.8
V
V
K
K
x
x
L
P
P
Drawings show application on D=3mm thick mounting plate
D
28.5
L
3
2
4 3 21
1 1 0
5
3
1 0 1
2
1
D
0
P 9 9.5 10 10.5 11 11.5 12 12.5 13.5
S
K
23
K 45° V
4.8
3
L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3
48
58
28.5 28.5
SD
Mounting plate thickness table For further explanation > see page 3.7
3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D
P
Drawings show application on D=3mm thick mounting plate
Soft closing systems Glissando TL > see page 2.11
Door clearance For further explanation > see page 3.7
Accessories Cover caps for hinge arm > see page 3.145
n
i Fm
F>
V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
3.104
Basic 110/45°
45° angled application for wooden doors
110° Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Cranking
18mm
6
9.5
45
Ø 35
Item number
Item number
248-0L33-050
248-0L28-050
248-0L46-050
248-0L70-050
Drilling patterns for hinge cups > see page 3.10
100 Pcs
Cup made of steel, arm made of zinc
Mounting plates
Hinge cup screws If not pre-mounted Steel mounting plates > see page 3.117
6.9
3.5 15
Zinc diecast mounting plates > see page 3.117
3.105
6.9
3.5 15
Legend of hinge cup symbols
820-6308-050 10000 Pcs
Screw-on ready < screws
Machine insertion ready
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on
Depth adjustment +4/-0mm
Concealed hinges
Height adjustment +2/-2mm
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate drilling distance
Mounting plate thickness table For further explanation > see page 3.7
D
S
38.5
D
S
K
3 0 4 1 5 2 D
37
37
63.5 63.5
38.5
45° 45°
15
K V
K
37 37
V
15
Drawings show application on D=0mm thick mounting plate 19
56.5
19
48
48 73 73
D=18D=18
56.5
19
45° 45°
K
48
K
48
19
Drawings show application on D=18mm thick mounting plate
Soft closing systems Glissando TL > see page 2.11
Accessories
Door clearance For further explanation > see page 3.7 Cover caps for hinge arm > see page 3.145
V 16 17 18 19 20 1 21 22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
3.106
Basic 110/90°
For wooden door cabinets with blind panels
110° Interaxis
Interaxis
45 mm
48 mm 48
Cup or mounting plate type
Cranking
18mm
6
9.5
45
Ø 35
Ø 35
Item number
Item number
248-0G58-050
248-0G53-050
248-0G83-050
248-0L73-050
Drilling patterns for hinge cups > see page 3.10
200 Pcs
Cup made of steel, arm made of zinc 248-0255-050
Cranking
0mm
Drilling patterns for hinge cups > see page 3.10
200 Pcs
Cup made of steel, arm made of zinc 244-0810-650
Blind panel mounting plate
200 Pcs
Made of zinc
3.5 15
6.9
3.5 15
3.107
11
244-0813-650
13
244-0C32-650
15
244-0P28-650
This mounting plate can be used only with Basic 110/90° hinges. Information about mounting plate symbols > see page 3.118 Legend of hinge cup symbols
Hinge cup screws If not pre-mounted 6.9
248-0V66-050
820-6308-050 10000 Pcs
Screw-on ready < screws
Machine insertion ready
Pre-mounted euro screws
• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate drilling distance
K F
9
min22
19 V
S
X
9 K min22
32
9
Mounting plates
These hinges can only be used with blind panel mounting plates
Door clearance For further explanation > see page 3.7
V 16 17 18 19 20 1 21 22 K
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2 FMIN
Gap Z=0
3.108
Basic 110
For aluminium frame doors
110° Aluminium frame cup
28â&#x20AC;&#x2030;mm 28
19 Cup type
Cranking
950-0T26-050
0mm
200 Pcs
Cup made of zinc, arm made of steel
Mounting plates Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117
3.109
Item number
• Opening angle 110˚ • Hinge on plate mounting system slide-on
Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
Side adjustment +3/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate drilling distance
S
S
17.8
Mounting plate thickness table For further explanation > see page 3.7
x 12 13 14 15 16 1 17 18
17.8 D
D
2
61.5 37
37
2 F>Fmin F>Fmin G
7+D
z
x
z
x
37
61.5
17 3 2 1 0
37
18 4 3 2 1 0 G 19 5 4 3 2 1 1 0 20 6 5 4 3 2 1 1 0 D
G
7+D
10 1.5 5.5 42
G 19 28
16
90˚ Ø7.0
H
Drilling pattern for aluminium frame hinges
Screws included
Door clearance For further explanation > see page 3.7
Accessories Cover caps for hinge arm > see page 3.145
H 17 18 19 20 21 1 22 G
n
i Fm
F>
17 0.5 0.7 1.1 1.4 1.81 2.9 18 0.5 0.7 1.0 1.3 1.71 2.5 19 0.5 0.7 0.9 1.2 1.61 2.1
20 0.5 0.7 0.9 1.2 1.51 2.0 FMIN Gap ZMIN=0.5
3.110
Basic 170
For wooden doors
135°-165° Interaxis
Interaxis
45 mm
48 mm 48 6
9.5
45
Ø 35 Cup type
Cranking
0mm
Ø 35
Item number
Item number
248-0R10-050
248-0P43-050
248-0L51-050
248-0R12-050
Drilling patterns for hinge cups > see page 3.10
50 Pcs
Made of steel and zinc
Cranking
*248-0S05-050
0mm
With adjustable opening angle
50 Pcs
Drilling patterns for hinge cups > see page 3.10 * Available upon special request > see page 0.3
Made of steel and zinc
Adjustable opening angle
Cranking
248-0160-050
9mm
248-0161-050
Drilling patterns for hinge cups > see page 3.10
Made of steel and zinc
50 Pcs Mounting plates
Legend of hinge cup symbols
Hinge cup screws If not pre-mounted
Steel mounting plates > see page 3.117
6.9
3.5
820-6308-050
15
Zinc diecast mounting plates > see page 3.117
3.111
*248-0S06-050
10000 Pcs 6.9
3.5 15
Screw-on ready < screws
Machine insertion ready
• Opening angle 135°-165° • Drilling diameter for hinge cup 35mm • Drilling depth 12mm • Hinge on plate mounting system slide-on E nable better accessibility into cabinet interior due to the wider opening angle O pening angle can be easily adjusted by rotating the appropriate screw on hinge arm
Height adjustment +2/-2mm
Side adjustment +3/-0.5mm
Depth adjustment +4/-0mm
Concealed hinges
· ·
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate thickness table For further explanation > see page 3.7
Mounting plate drilling distance
X 10 11 12 13 14 1 15 16 17 18 19 20
19
52 D 19
52 D
67
K
19
F>Fmin 37
F>Fmin
19
K K
37
37
67
x
3 6 5 4 3 2 1
1 0
4 6 5 4 3 1
2 1 0
5 6 5 4 1
3 2 1 0
37 90
º
˚
C
1.4
1.4
7 6 1
5 4 3 2 1 0 D 61 61
S
70
D D
S
67
67
S
4 3 2 1 0
19 19
0˚
C C
19
61
61
19
19D
7.6
7.6 79
S S
67
S
79
S
D
67
37 37
37 37
67 67
67 67
V V
V V
prikazuje spono s podlogo RisbaRisba prikazuje spono s podlogo D=9D=9
Drawings show application on D=9mm thick mounting plate
File name: VG-SK-170-09-SO File name: VG-SK-170-09-SO
prikazuje spono s podlogo RisbaRisba prikazuje spono s podlogo D=18D=18
Drawings show application on D=18mm mounting plate.
Door clearance For further explanation > see page 3.7
S D
V
V
Risba prikazuje spono s podlogo D=18 Risba prikazuje spono s podlogo D=18
37
37
V
Risba prikazuje spono s podlogo D=18
Push latch > see page 3.147
3 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 K 4 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 File name: VG-SK-170-09-SO File name: VG-SK-170-09-SO 5 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0
F>
n
File name: VG-SK-170-09-SO
Glissando CR > see page 2.15
Accessories
16 17 18 19 20 1 21 22 23 24 i Fm
67
67
37
37
D D
V V
F>2Fmin F>2Fmin
Drawings show application on D=0mm thick mounting plate
37
79
V
V
67
67
V V
79 79
D
Glissando 170 > see page 2.13
Risba prikazuje spono s podlogo D=9 Risba prikazuje spono s podlogo D=9
S S
67
37
˚
˚
S
Risba prikazuje spono s podlogo D=9
D D
7.6
90
90
37
D
70 70
F>2Fmin
˚
Soft closing systems S 70 67
37
19
F>Fmin F>Fmin
Risba D prikazuje spono s podlogo D=0 Risba prikazuje spono s podlogo D=0
D
x
90
Drawings show C application on C prikazuje spono Risba s podlogo D=0 D=0mm thick mounting plate S 70
70
S
V 67
67 19 19
K
SD
prikazuje spono s podlogo RisbaRisba prikazuje spono s podlogo D=0D=0
37
67 C
F>Fmin
x
K
61
61 D
x K
7.67.6
D
67
D
S
˚
S
61
D
D D
37 37
37 67 V
V
F>2Fmin
61
61 61
C value with D=0 mounting plates x x F>Fmin F>Fmin K K K 3 4 5 6 7 C -9.0 -8.1 -7.1 -6.1 -5.2 9 90
37
67 V
V
F>2Fmin
19 19
67 67
61
70
Drawings show application on D=0mm thick mounting plate
S
61
6 6 5 1
67 67
90
V V
C
6 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 2.6 7 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 5.1 FMIN Gap ZMIN=0.5
3.112
Basic for pie-cut corner cabinet
For wooden doors
Interaxis
Interaxis
45 mm
48 mm 48
Ø 35 Cup type
Corner cabinet
Item number
248-0T81-050
6
9.5
45
Ø 35 Item number
248-0T80-050
248-0U13-050 248-0U14-050 Drilling patterns for hinge cups > see page 3.10
100 Pcs
Cup made of steel, arm made of zinc
Mounting plates
Hinge cup screws If not pre-mounted
Legend of hinge cup symbols
Steel mounting plates > see page 3.117 6.9
Zinc diecast mounting plates > see page 3.117
820-6308-050 10000 Pcs
6.9
3.5 15
3.113
3.5 15
Screw-on ready < screws
Machine insertion ready
• Drilling diameter for hinge cup • Drilling depth • Hinge on plate mounting system
35mm 11.5mm slide-on
· S tandard drilling for hinge and mounting plate · H inge integrated adjustment
Height adjustment +2/-2mm
Depth adjustment +5/-1.5mm
Concealed hinges
Side adjustment +3/-1mm
For further explanation > see pages 3.14 - 3.16
Mounting details
Adjustments
Drilling details
37
32
V = 16 - 22 mm K = 3 - 5 mm
K
35
Any Basic mounting plate of thickness D=0 can be used. The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing.
+6
-2 11.5 +3 -1 +5 -1.5
D=3
Accessories Cover caps for hinge arm > see page 3.145
3.114
Basic Flap door hinge
For wooden doors
Senso / fold
37
Verso / Maxi Swing
Duo standard, duo forte Maxi
Strato
V
Maxi up
11 C
K
S
32
Ø35
32
K C (mm) (mm) 3
4.5
4
5.5
5
6.5
6
7.5
Ø5
A
90° B
MOUNTING PLATE HEIGHT D
A B (mm) (mm)
0
Interaxis 1 11.5
2,5
20
3,5
21
2
4,5
22
3
5,5
23
24mm MIN 12 mm
8 mm-acjustment 2 mm MIN = 6 mm
Cup type
Cranking
0mm
200 Pcs
Hinge cup screws If not pre-mounted Steel mounting plates > see page 3.117
6.9
3.5 15
Zinc diecast mounting plates > see page 3.117
left
926-0A26-050
right
926-0A27-050
6.9
3.5 15
Legend of hinge cup symbols
820-6308-050 10000 Pcs
24 38
Item number
Made of steel
Mounting plates
3.115
Ø35
17
21
21.5
Screw-on ready < screws
• Opening angle 90° • Mounted on the cabinet side 35mm • Standard drillings 11.5mm • Hinge on plate mounting mechanisms slide-on · T o be used with flap stay mechanisms · Mounted on the cabinet side · Standard drillings Height adjustment +2/-2mm
Depth adjustment +4/-0mm
Concealed hinges
Side adjustment +0.5/-0.5mm
For further explanation > see pages 3.14 - 3.16
Mounting details
Mounting plate thickness table For further explanation > see page 3.7
37
37
Ø5
D 0 1 2 3 B (mm) 20 21 22 23
Ø5
D=mounting plate height X=22.5 + K - A +/-2mm height adjustment
32
32
V
32
V
32 A
A
C
2
min 1
2
C
S
S
min 1
B
B
11.5 K
11.5
K Ø35 X
Ø35 X
Accessories
Door clearance For further explanation > see page 3.7 Cover caps for hinge arm > see page 3.145
V 16 17 18 19 20 1 21 22
n
i Fm
F>
3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0
3.116
Basic Mounting plates
For Basic concealed hinges
Drilling pattern
Dimensions
Steel mounting plates
60.3
37
52
32
200 Pcs
Made of steel
Zinc diecast mounting plates
60
37
50
32
200 Pcs
Made of zinc
Fixing screws for mounting plates If not pre-mounted Chipboard screws
Euro screws Ø8
Ø8
L
Ø6.3
L
Ø6.3
821-6304-050 L=11 821-6323-050 L=13 821-6332-050 L=15 10000 Pcs
3.117
4 4
7.5 7.5 16 16
820-6328-050 10000 Pcs
D
Height adjustment +/- 2mm
Item number
Item number
Ø5
Item number
Ø6.3
Ø5
Item number
Ø3
Item number
Ø10
Item number
Ø5
Item number
min 10.5
Ø4.5
Ø5
Item number
10.5
min 7.5
15
13 min 9
4.5
5.8
min 8
Mounting plate thickness (D)
11
Ø6.3
7.5
min 10.5
Ø6.3
15
15
13
min 11
11
min 11
Mounting plate type
Mounting plate thickness
Ø5
Item number
0 mm 244-0866-050 *244-0L29-050 244-0963-050 244-0965-050 244-0929-050 *244-0L26-050 *244-0L50-050 244-0H64-050 244-0P24-050 1 mm 244-0T40-050
244-0307-050 244-0K95-050
*244-0S65-050
2 mm 244-0T28-050
244-0Z64-050 244-0K96-050
*244-0S66-050 *244-0V64-050 244-0S68-050
244-0S67-050
3 mm 244-0867-050 *244-0L39-050 244-0L66-050 244-0G19-050 244-0930-050 *244-0L98-050 *244-0L40-050 244-0H65-050 244-0P25-050
* Available upon special request > see page 0.3
4 mm 244-0L37-650
244-0K97-650
244-0M28-650
5 mm 244-0L38-650
244-0K98-650 244-0T14-650
244-0M29-650
6 mm 244-0232-650
244-0914-650
9 mm 244-0062-650
244-0067-650 244-0P41-650
18 mm 244-0063-650
244-0068-650 244-0175-650
* Available upon special request
*244-0B12-650
see page 0.3
Legend of mounting plate type symbols
11 Screw on ready for euro screws < screws
Screw-on ready for chipboard screws
Pre-mounted 11mm euro screws
13 Pre-mounted 13mm euro screws
15 Pre-mounted 15mm euro screws
7.5 Pre-mounted chipboard screws
Machine insertion ready
Premounted 7.5mm expanidng dowels
10.5 Pre-mounted 10.5mm expanding dowels
3.118
Concealed hinges
Z
Basic Mounting plates
For Basic concealed hinges
Drilling pattern
Dimensions
Steel mounting plates · Back-to back application
60.3
37
52
32
200 Pcs
Made of steel
Zinc diecast mounting plates · For 18mm inset doors
80
37
50
32
Made of zinc
200 Pcs Fixing screws for mounting plates If not pre-mounted
Ø8
Ø8
L
Ø6.3
L
Ø6.3
Euro screws
821-6304-050 L=11 821-6323-050 L=13 821-6332-050 L=15 10000 Pcs
3.119
4 4
7.5 7.5 16 16
Chipboard screws
820-6328-050 10000 Pcs
Concealed hinges
Height adjustment +/- 2mm
10.5
S 15
Mounting plate thickness (D)
Mounting plate type
Mounting plate thickness
Ø5 5.8
Item number
Item number
244-0V50-050
3 mm
5
S>=1
Minimum panel thickness is 15mm. File name:3D-PODL-ZAMAKNJENA
3D-PODLOGA-ZAMAKNJENA
Datum:
Franc BANKO 16.01.2010
Telefon:
+386 5 6690 310
Fax: e-mail:
+398 5 6690 301 @
Izdelal:
Telefon:
d.d. DEKANI KOPER - SLOVENIJA
-
Slide on
Ime datoteke:
Fax:
RAZVOJNI ODDELEK-R&R
2 mm
244-0036-650
1 od 1
Stran:
V=18
37
e-mail:
Fits standard 37mm drilling
Legend of mounting plate type symbols
10.5 Screw on ready for euro screws < screws
Pre-mounted 10.5mm expanding dowels
File name:PODLOGA-KRIZNA
PODLOGA-KRIZNA Telefon: Fax: e-mail:
-
Slide on
Datum:
Franc BANKO 16.01.2010
Telefon:
+386 5 6690 310
Fax: e-mail:
+398 5 6690 301 @
Izdelal:
Ime datoteke:
PREDLOG VGRADNJE za kupca :
:
Z
37
za kupca
D
d.d. DEKANI KOPER - SLOVENIJA RAZVOJNI ODDELEK-R&R
Stran:
1 od 1
3.120