Titus Tekform Complete Product Catalogue by Titus Tekform

Titus Tekform Technical catalogue Complete Technical Product Catalogue

July 2017

2016

Titus Tekform www.titustekform.com.au October 2016

00_lama_ovitek_2014.indd 1

6. 11. 14 07.42

Important information

Intellectual property Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the â&#x20AC;&#x2DC; know howâ&#x20AC;&#x2122; contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights in others. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law. Responsibility It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives. Technical information While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering. Right to amend Due to constant improvements on products and information presented, we reserve the right to amend information at any time without prior notice. *Non preferred articles All Item numbers in the catalogue marked with * are for non preferred non stock items available upon special request. For such products, extended delivery times may apply. Trademarks Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Lama d.d. Dekani, WoodWelding is a registered trademark of WW SA.

0.3

Contents

Hinges & Dampers

Drawers & Runners

Furniture Fittings

Fasteners

General Hardware & Tools

Edgebanding

1.1

- Product Guide - Titus Concealed hinges - Titus Special Hinges - Other Hinges - Hinge Accessories - Titus Glissando Soft Closing Systems

1.5 1.97 1.107 1.109 1.113

- Product Guide - Tekform Drawer - Slimline - Tekform Drawer - Tekform Drawer - Single Wall - Ball Bearing Drawer Slides

2.09C 2.3 2.41 2.54

2.1

3.1

- Product Guide - Overhead Solutions - Connectors - Adjustable Cabinet Legs - Furniture Legs - Panel Mounting

- Product Guide - Screws - Brad Nails - Staples - Accessories

- Product Guide - Cabinet Hardware - Furniture Locks - General Hardware - Safety Materials

- ABS - PVC - Melamine - FastEdge

3.3 3.7 3.46 3.50 3.53

4.1 4.3 4.13 4.15 4.16

5.1 5.3 5.19 5.26 5.36

6.1 6.2 6.3 6.5 6.6

Abrasives & Adhesives

Cabinet Handles

Innerware & Accessories

LED Lighting

Sinkware & Appliances

Doors, Panels & Surfaces

- Product Guide - Abrasives - Adhesives

- Product Guide - Stefano Orlati Handles & Knobs - Tekform Handles & Knobs

7.1 7.3 7.7

8.1 8.2 8.47

9.1

- Product Guide - Kitchen Innerware - Kitchen Accessories - Laundry Innerware - Drawer Inserts - Waste Bins

- Product Guide - Down Lights - Strip Lights - Profiles - Accessories

- Product Guide - Tekform Sinkware - Tekform Tapware - InAlto Appliances - Domus Ducting

- Product Guide - Vinyl Wrapped Doors - Aluminium Framed Doors - Roller Doors - Solid Surfaces

9.3 9.23 9.24 9.25 9.39

10.1 10.5 10.7 10.15 10.24

11.1 11.3 11.25 11.31 11.44

12.1 12.2 12.12 12.19 12.21

A Comprehensive Range

T-type hinge Titus New Generation hinge for quick furniture assembly and consistent performance on wide range of doors '3Way' 'snap-on' mounting Highly tolerant Adjustable damping ConfidentClose' Numerous application possibilities Âˇ for simpler cabinet design Âˇ for demanding high quality furniture of larger heights and weights

S-type hinge Simple and quick 'snap-on' mounting system Easy assembly and disassemby Adjustable damping ConfidentClose Push to open for handleless furniture

B-type hinge Reliable slide-on mounting system Simplicity in use Adjustable damping ConfidentClose' Reliable door closing

1.20A

Door thickness

110° 120° 170°

15-26mm

Crankings

0mm 5mm 9mm 17mm angled

Door tab K

Mounting mode

Mounting plate type

Mounting plate height

Soft closing options

Durability (cycles)

Page

3-6mm

3Way' snap-on

cruciform linear for face frame

0mm 1mm 2mm 3mm 4mm

Damping integrated in the hinge cup

100.000

1.26

80.000

1.53

80.000

1.101

Glissando add-on or stand-alone damping solutions

110° 170°

16-24mm

0mm 9mm 15mm angled

3-5mm

snap-on

cruciform for face frame

0mm 1mm 2mm 3mm

Damping integrated in the hinge cup Glissando add-on or stand-alone damping solutions

110° 170°

16-24mm

0mm 9mm 15mm angled

3-5mm

slide-on

cruciform

0mm 1mm 2mm 3mm

Damping integrated in the hinge cup Glissando add-on or stand-alone damping solutions

1.20B

Concealed hinges

Opening angle

Concealed Hinges Product Guide

T-type 0mm

110°

for wood door

1.26

5mm

110°

for wood door

1.26

9mm

110°

for wood door

1.28

17mm

110°

for wood door

1.28

0mm

120°

for wood door

1.30

9mm

120°

for wood door

1.30

T-type Glissando 110/45°

45°, 17mm

110°

for wood door

1.32

T-type Glissando 110/90°

90°, 17mm

110°

for wood door

1.34

T-type 110

0mm

110°

for wood door

1.36

5mm

110°

for wood door

1.36

9mm

110°

for wood door

1.38

17mm

110°

for wood door

1.38

0mm

120°

for wood door

1.40

9mm

120°

for wood door

1.40

T-type 110/45°

45°, 17mm

110°

for wood door

1.42

T-type 110/90°

90°, 17mm

110°

for wood door

1.44

T-type 170

0mm

170°

for wood door

1.46

9mm

170°

for wood door

1.46

T-type Glissando 110

T-type Glissando 120

T-type 120

T-type mounting plates

1.48

S-type 0mm

110°

for wood door

1.54

9mm

110°

for wood door

1.54

0mm

110°

for wood door

1.56

9mm

110°

for wood door

1.56

15mm

110°

for wood door

1.56

S-type-i 110/30º

30º, 9mm

110°

for wood door

1.58

S-type-i 110/45º

45º, 9mm

110°

for wood door

1.60

45º, 18mm

110°

for wood door

1.62

S-type-i plus 110

S-type-i 110

1.20C

Opening angle

Cup type

Page

S-type-i 110/90º

90º, 18mm

110°

for wood door

1.64

S-type plus 110

0mm

110°

for wood door

1.66

9mm

110°

for wood door

1.66

0mm

110°

for wood door

1.68

9mm

110°

for wood door

1.68

0mm

110°

for wood door

1.70

9mm

110°

for wood door

1.70

15mm

110°

for wood door

1.70

S-type 110/-15º

-15º, 0mm

110°

for wood door

1.72

S-type 110/15º

15º, 0mm

110°

for wood door

1.74

S-type 110/24º

24º, 9mm

110°

for wood door

1.76

S-type 110/30º

30º, 9mm

110°

for wood door

1.78

S-type 110/45º

45º, 9mm

110°

for wood door

1.80

45º, 18mm

110°

for wood door

1.82

S-type 110/90º

90º, 18mm

110°

for wood door

1.84

S-type 110

0mm

110°

for aluminium frame door

1.86

S-type 170

0mm

165°

for wood door

1.88

9mm

165°

for wood door

1.90

for wood door

1.92

S-type plus 110 Touch opening

S-type 110

S-type for pie-cut corner cabinet S-type mounting plates

1.94

B-type 0mm

110°

for wood door

1.102

9mm

110°

for wood door

1.102

15mm

110°

for wood door

1.102

B-type-i 110/30º

30°, 9mm

110°

for wood door

1.104

B-type-i 110/45º

45°, 9mm

110°

for wood door

1.106

45°, 18mm

110°

for wood door

1.108

B-type-i 110

1.20D

Concealed hinges

Cranking

B-type-i 110/90º

90°, 18mm

110°

for wood door

1.110

B-type 110

0mm

110°

for wood door

1.112

9mm

110°

for wood door

1.112

15mm

110°

for wood door

1.112

B-type 110/30º

30°, 9mm

110°

for wood door

1.114

B-type 110/45º

45°, 9mm

110°

for wood door

1.116

45°, 18mm

110°

for wood door

1.118

90°, 0mm

110°

for wood door

1.120

90°, 18mm

110°

for wood door

1.120

B-type 110

0mm

165°

for aluminium frame door

1.122

B-type 170

0mm

165°

for wood door

1.124

9mm

165°

for wood door

1.126

0mm

90°

for wood door

1.128

B-type 110/90º

B-type for pie-cut corner cabinet

90°

B-type flap door hinge

1.130

B-type mounting plates Hinge Ø40

1.132 0mm

93°

for wood door

1.136

10mm

93°

for wood door

1.136

18mm

93°

for wood door

1.138

22mm

93°

for wood door

1.138

Hinge Ø40 mounting plates

1.140

Other Hinges Wide angle hinge and mounting plate

270°

for wood door

1.142

Refrigerator cabinet door hinge

110°

for wood door

1.144

Accessories Push latch

1.146

Cover caps

1.148

1.20E

Mounting type

Hinge type

Hinge opening angle

page

Glissando TL

add-on

T-type

110

2.10

Glissando TL

add-on

S-type, B-type

110

2.10

Glissando TL170

add-on

T-type, S-type, B-type

170

2.12

Glissando CR

stand alone

T-type, S-type, B-type

110, 120, 170

2.14

1.20F

Concealed hinges

Glissando soft closing systems

Concealed Hinges Door Overlay

How to Achieve the Desired Door Overlay? By choosing the hinge of appropriate cranking

Concealed hinges with specific hinge arms are available for different door overlays. The most common overlays are:

Cabinet side Door

1. Full overlay Use a hinge with 0mm cranking

2. Partial overlay for double doors Use a hinge with 5mm or 9mm cranking

3. Inset door Use a hinge with 15mm or 17mm cranking

By choosing the mounting plates of appropriate thickness

To achieve the desired overlay (x) while using a determined drilling distance (K), a mounting plate of appropriate

thickness (D) must be chosen from the enclosed table or calculated with given formula. x

K 4 5

x K

D=4+K-x

By choosing the appropriate drilling distance K

To achieve the desired door overlay (x) while using a determined mounting plate thickness (D), an appropriate drilling distance K must be chosen.

x K

1 2 3

3 3

0 D

1.20G

Concealed hinges Through side adjustment

The side adjustment is made by rotating the appropriate screw on the hinge arm.

Adjustment range

Door clearance and gap

The door clearance (Fâ&#x2030;ĽFmin) and gap (Z) represent the minimal necessary space needed for the correct opening and closing of the door. The minimal required values depend on the cup drilling distance (K), door thickness (V)

and the type of hinge. The minimum clearance scale can be found on product pages > see Door clearance chart. When using hinges with partial overlay the door clearance must be twice as large (Fâ&#x2030;Ľ2Fmin).

16 17 18 19 20 21 22

3 0.3 0.5 0.7 1.0 1.3 1.7 2.5

Z K F

K 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1

5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN Gap ZMIN=0

1.20H

Concealed Hinges Hinge Cup Types

How to Mount the Hinge on the Door? There are cup type symbols listed on product pages beside item numbers. Below you can find their explanation.

No pre-mounting

The hinge is fixed on the door with two screws. 3mm pilot holes recommended.

Easy-Fix time saving system

Quarter turn fixing for 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5).

90ยบ

Machine insertion ready hinge cup

Premounted dowels suitable for machine insertion into 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5)

Pre-mounted expando dowels

Pre-mounted expanding dowels with triple-start screw for fast fixing, suitable for 8mm holes.

1.20I

Pre-mounted euro screws for 5mm holes. Where not specified otherwise, euro screws are 13mm long.

inge cup with H pre-mounted chipboard screws

Pre-mounted chipboard screws. 3mm pilot holes recommended.

Aluminium frame screw-on hinge cup

The hinge is fixed onto a specific drilling on the aluminium frame.

Concealed Hinges hinges Concealed

inge cup with H pre-mounted euro screws

1.20J

Concealed Hinges Boring Details

Drilling Patterns for Hinge Cup Interaxis

Interaxis

45mm

48mm

52mm

· T-type · S-type · B-type

52 6

9.5

5.5

Interaxis 45mm, 48mm and 52mm*

*Available on special request > see page 3.9

Hinge cup type

Ø 35

Drilling pattern

9.5

Premounted expando dowels

5.5

9.5

Machine insertion ready

Premounted chipboard screws

Screw-on ready

5.5

Easy-fix system

9.5

Interaxis is the distance between two holes for fixing screws on the hinge cup.

1.20K

Premounted euro screws

5.5

Concealed Hinges hinges Concealed

Concealed Hinges Mounting Plate Type

How to Fix the Mounting Plate on the Cabinet Side? There are mounting plate type symbols listed on product pages beside item numbers. Below you can find their explanation.

No pre-mounting, chipboard screw ready

The mounting plate is fixed with two chipboard screws or equivalent. 3mm pilot holes recommended.

No pre-mounting, euro screw ready

Fixing with 6.3mm euro screws into pre-drilled 5mm holes. To choose appropriate head and length for use with this mounting plate is recommended.

Machine insertion ready

Pre-mounted dowels for machine insertion into 10mm holes.

Pre-mounted euro screws

Euro screws for 5mm holes are pre-mounted on the mounting plate. Available lengths: 11mm, 13mm and 15mm

Pre-mounted expanding dowels

Pre-mounted expanding dowels for 5mm holes. Available lengths: 7.5mm and 10.5mm

Pre-mounted chipboard screws

The mounting plate is fixed with two pre-mounted chipboard screws. 3mm pilot holes recommended.

1.20L

Concealed Hinges Hinge-to-plate Mounting

How to Assemble the Hinge and the Mounting Plate? T-type ‘3Way’ ‘snap-on’

‘3Way’ ‘snap-on’ mounting for intuitive hinge-to-plate assembly in three directions:

front assembly

rear assembly

top assembly

disassembly: for disassembly press rear button on the hinge arm.

1.20M

- from the hinge arm front - from the hinge arm rear - from the top

The door is assembled on the cabinet side simply by positioning the two hooks under the hinge arm on the outer part of the mounting plate and pressing gently on the rear part of the hinge arm.

For disassembly press the rear button on the hinge arm.

assembly

disassembly

B-type slide-on

The hinge is assembled by sliding the hinge arm over the mounting plate. The hinge adjustment screw must fit into the groove on the mounting plate.

After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.

Key-hole

The hinge is assembled on the mounting plate by inserting the fixing screw on the appropriate hole on the hinge arm.

After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.

· Wide angle hinge · Refrigerator cabinet door hinge

1.20N

Concealed Hinges hinges Concealed

S-type ‘snap-on’

Concealed Hinges Loadings

Use the appropriate number of hinges so that the door height or weight does not exceed that shown below.

How Many Hinges per Door? Check the enclosed specifications for the number of required hinges per door by considering door height and weight.

Concealed hinges with Ø 35mm hinge cup diameter · T-type · S-type · B-type · Other hinges

height (cm)

250

200

150

100 50 weight (kg)

· T-type Glissando · S-type-i · B-type-i

2 4-7

8-12 13-16 17-22

height (cm)

250

200

150

100 50 weight (kg)

1.20O

2 4-7

8-12 13-16 17-22

Hinges with integrated damping can be combined with non-damped hinges from standard hinge range. A trial mounting is always recommended.

Adjustment range can be found on the product pages.

Concealed Hinges hinges Concealed

Concealed Hinges Adjustment

Side Adjustment The side adjustment aligns the door with the side of the cabinet.

By rotating the appropriate screw

The side adjustment is made by rotating the screw on the hinge arm.

T-type S-type B-type

Adjustment range

By temporarily loosening the fixing screw Âˇâ&#x20AC;&#x201A; Wide angle hinge

For the side adjustment: 1. Release the fixing screw 2. M ake the necessary adjustment by rotating the appropriate screw 3. Tighten the fixing screw Without releasing the fixing screw no side adjustment is possible.

Adjustment range

1.20P

Concealed Hinges Adjustment

Height Adjustment

-2 -2

-2 +2 +2 -2

+2 +2

T-type with cam adjustable cruciform mounting plate

The height adjustment is made by rotating the cam adjuster on the mounting plate.

-2 -2

By rotating the cam adjuster

-2 -2

Height adjustment is necessary to achieve optimal vertical door position.

-2

S-type with cam adjustable cruciform mounting plate

+2 +2

T-type with cam adjustable horizontal mounting plate

1.20Q

Concealed Hinges hinges Concealed +2

· T-type and S-type with cruciform mounting plate · B-type · Wide angle hinge

For height adjustment the two mounting plate fixing screws have to be temporarily released while making the manual adjustment.

-2

By releasing the screw slot

1.20R

Concealed Hinges Adjustment

Depth Adjustment The system enables easy adjustment of the gap between door and cabinet.

By rotating the cam adjuster

Rotate the cam adjuster on the hinge arm.

+4/-1 +4/-1

· T-type

-2 -2

+-/1.5

+2 +2

· S-type plus

By releasing the fixing or adjustment screw · S-type · B-type

The depth adjustment is made by temporarily releasing the adjustment screw (S-type) or fixing screw (B-type, Hinge Ø40). After the adjustment is made the screw has to be re-tightened.

Adjustment range

1.20S +/-1.5+/-1.5

Most of Titus hinges can be combined with soft closing devices. > see pages 2.11-2.16 for details

Concealed Hinges hinges Concealed

Titus recommends!

Door Closing Type There are two door closing systems:

Concealed hinges with self-closing angle · T-type · S-type · B-type

Free-swinging door hinges* · all series

self - closing free - swinging

The self-closing angle is the point from which the door will close by itself, without user assistance. The mechanism starts closing the door from a 14° to 25° angle, depending on the concealed hinge type. From that point to the maximum opening angle the door remains in an open position.

Optionally most of Titus concealed hinges can be supplied without selfclosing mechanism. These hinges may be ordered upon request. Soft closing devices can not be used with freeswinging door hinges. * Available upon special request > see page 3.9

1.20T

Concealed Hinges Adjustment

Damping Adjustment Adjustment of the damping force action can or beto adjusted to the damping T-type Glissando To decrease increase ST-i ‘snap-on’ hinges The damping fit different door weights and sizes which

force, change to position of the Basic-i ‘slide-on’ hingesenables perfect door functioning.

damping reduction switch. The damping force is factory pre-set to the maximum damping value.

Adjustment of the damping force ST-i ‘snap-on’ hinges Basic-i ‘slide-on’ hinges

The damping reduction switch in a pre-set position

To decrease or to increase the damping force, change to position of the damping reduction switch. The damping force is factory pre-set to the maximum damping value.

Damping is factory pre-set to the medium damping value. Turn towards ‘+’ to increase and ‘-’ to decrease the damping.

To decrease the damping force 1. Lift the damping activator. 2. Slide the damping reduction switch to opThe damping positereduction position. switch in a pre-set To decrease or to increase the damping, position

S-type-i plus series S-type-i series B-type-i series

change the position of the damping 2 1 reduction switch. Hinges are factory pre-set to the maximum damping value.

To increase the damping force, slide the damping reduction switch back to the factory pre-set To decrease the damping forceposition. 1. Lift the damping activator. 2. Slide the damping reduction switch to opposite position.

The damping reduction switch adjusts the force of2 damping.1 Example shows the damping force change in case of To increase the damping force, slide the damptwo hinges on door. ing reduction switch back to the factory pre-set

Damping force change

position.

Damping force change

The damping reduction switch in a pre-set position.

To increase damping, Hingethe set at the maximum damping value slide the damping reduction switch to lowest damping value Hinge set back at the the factory pre-set position.

To decrease the damping 1. L ift the damping activator. 2. S lide the damping reduction switch to opposite position.

The damping reduction switch adjusts the force of damping. Damping force change Example shows the damping force change in case of The damping reduction switch adjusts the damping. Example two hinges on door. shows the damping change in case of two hinges on door.

Hinge set at the maximum damping value Hinge set at the lowest damping value

Hinge set at the maximum damping value Hinge set at the lowest damping value 100% 100%

1.20U

85%

70%

damping force

85%

70%

damping force

Concealed Hinges hinges Concealed

Titus damping solutions Key Design Choices ‘ConfidentClose’ The hinge is designed to provide consumer preferred way of soft closing action.

Key design choices

Based on results Titushinge researches made in Damping in ofthe cup UK, Germany and Slovenia

Damper is positioned transversal on the hinge cup Fast closing

'One-for-all' efficiency principle

Late start of

· Allows for an easy and quick introduction deceleration action of various hinge versions: ST ‘snap-on’ and Basic ‘slide-on’ with different hinge arm crankings and angles · Standard hinge cup drilling depths: requires no changes in drillings for hinge Damping on the hinge cup cup Damper, positioned transversal to the hinge · Standard mounting plates cup allows for easy introduction of various hinge versions

Quiet landing with ‘SoftTouch’

Damped and non-damped version on one mounting plate platform

Adjustable damping force

Adjustable damping

Flexibility to 'tune' performance for all applications · Optimal damping on various door Flexibility to tune weights and sizesperformance for all applications · Intuitive and quick adjustment · Easily accessible adjustment button · Consistent performance over a wide range of doors of different sizes and weights · Easy accessible adjustment button for intuitive and quick adjustment Adjustable damping zone and force Adjustable damping zone and

Titus Damper Inside

· Efficient damping at any closing speed · Reliable closing · Damping force consistency

Titus hydraulic damper

Titus hydraulic damper, designed and produced in-house

force

· Reliable and consistent life-long damping · Minimum damper rebounce · Dampers’ consistency over high volume production runs assured

1.20V

T-type Hinges ‘3Way’ snap-on · ·

Allows for intuitive hinge-to-plate mounting in three directions Enhanced mounting experience

Easy door installation even in cases of 4-5 hinges per door Easy door installation

even in cases of 4.5 hinges per door ·E asy and quick assembly and disassembly ·F lexibility for the furniture user · Tight hinge.to.plate joint improves hinge stability and reduces door sag

1.20W

Highly tolerant

Rigidity

Efficient performance in marginal values Highly tolerant of tolerances

·· E door closing in of Reliable fﬁcient performance in case marginal accidental misalignment values of tolerances · ‘ConfidentClose’ assured

·R eliable door closing in case of accidental misalignment · ‘ ConfidentClose’ assured

Hinge-to-plate attachment assures Rigidity stability and rigidity Smooth performance

· Hinge.to.plate attachment assures stability and rigidity · Smooth performance

ConcealedConcealed Hinges hinges

T-Type Hinges

Low hinge cup drilling depth Enables application on door thicknesses Adjustable damping from 15mm on

·C onsistent performance on doors of different dimensions and weights · I ntuitive adjustment procedure

‘Titus Damper Inside’ · TitusDamper proprietary multi-purpose ‘Titus Inside’ damping technology · Reliable and consistent ·T itus proprietary multi.purpose life-long damping technology ·damping No rebounce

·R eliable and consistent life.long damping ·N o rebounce

Proven Glissando concept · ·

Damper is positioned Proven Glissando concept transversal on the hinge cup Reliable performance

· Damper is positioned transversal on the hinge cup · Reliable performance

1.20X

T-type Glissando 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

11.9 11.4

0mm K

9.5

Ø 35

Item number

701.0AT0.054

701.0AS0.054

701.0AT1.054

701.0AS1.054

701.0AT4.054

701.0AS4.054

42.5

Drilling patterns for hinge cups > see page 9

65.4

26.1

150 Pcs

Made of steel

Cranking 11.9 11.4

5mm K

42.5

701.0BT0.054

701.0BS0.054

701.0BT1.054

701.0BS1.054

701.0BT4.054

701.0BS4.054

Drilling patterns for hinge cups > see page 9

65.4

26.1

150 Pcs

Made of steel

Mounting plates Cam adjustable cruciform mounting plate > see page 45

7.5

Cruciform mounting plate > see page 47

Accessories

Cam adjustable linear mounting plate > see page 45 Face frame adapter plate > see page 47

1.20Y

Hinge cup screws If not pre.mounted

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs Cover caps for hinge arm > see complete catalogue page 1.111

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Door adjustment

Side adjustment +3/-1mm For further explanation > see page 19

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 5

37 Z

K 5

F>Fmin X 10.6

Depth adjustment +4/1mm

For further explanation > see pages 14-17

67.5

18.5 S

Height adjustment +2/-2mm

D=13+K.x Drawing show application on D=0mm thick mounting plate

67.5

K 15.6

5 F>Fmin

X V

F>Fmin X 15.6

67.5

23.5

D=8+K.x

Drawing show application on D=0mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 5

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20Z

Concealed hinges

Damping adjustment

T-type Glissando 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

11.9 11.4

9mm K

9.5

Ø 35

Item number

701.0CT0.054

701.0CS0.054

701.0CT1.054

701.0CS1.054

701.0CT4.054

701.0CS4.054

42.5

Drilling patterns for hinge cups > see page 9

65.4

26.1

150 Pcs

Made of steel

Cranking 11.9 11.4

17mm K

42.5

701.0DT0.054

701.0DS0.054

701.0DT1.054

701.0DS1.054

701.0DT4.054

701.0DS4.054

Drilling patterns for hinge cups > see page 9

65.4

26.1

150 Pcs

Made of steel

Mounting plates Cam adjustable cruciform mounting plate > see page 45

7.5

Cruciform mounting plate > see page 47

Accessories

Cam adjustable linear mounting plate > see page 45 Face frame adapter plate > see page 47

1.20AA

Hinge cup screws If not pre.mounted

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs

Cover caps for hinge arm > see complete catalogue page 1.111

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Door adjustment

Side adjustment +3/-1mm For further explanation > see page 19

Mounting details

Mounting plate thickness table For further explanation > see page 5

Z 37

67.5

Depth adjustment +4/-1mm

For further explanation > see pages 14-17

67.5

27.5 27.5

Mounting plate drilling distance

Height adjustment +2/-2mm

K 5

F>2Fmin F>2Fmin

19.6

9.6

D=4+K.x

V V

Drawing show application on D=0mm thick mounting plate

68.6

37.5 37.5

37+V

F>Fmin F>Fmin

D= 4+K+F

29.6 V V

Drawing show application on D=2mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 5

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20AB

Concealed hinges

Damping adjustment

T-type Glissando 120

For wood doors

· · · ·

120°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

120˚ 35mm 11.9mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

11.9 11.4

0mm K

9.5

Ø 35

Item number

701.0UT0.054

701.0US0.054

701.0UT1.054

701.0US1.054

701.0UT4.054

701.0US4.054

42.5

Drilling patterns for hinge cups > see page 9

65.4

26.1

150 Pcs

Made of steel

Cranking 11.9 11.4

9mm K

42.5

701.0VT0.054

701.0VS0.054

701.0VT1.054

701.0VS1.054

701.0VT4.054

701.0VS4.054

Drilling patterns for hinge cups > see page 9

65.4

26.1

150 Pcs

Made of steel

Mounting plates Cam adjustable cruciform mounting plate > see page 45

7.5

Cruciform mounting plate > see page 47

Accessories

Cam adjustable linear mounting plate > see page 45 Face frame adapter plate > see page 47

1.20AC

Hinge cup screws If not pre.mounted

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs Cover caps for hinge arm > see complete catalogue page 1.111

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Door adjustment

Side adjustment +3/-1mm For further explanation > see page 19

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 5

67.5 37 Z

K 5

F>Fmin X 10.1

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 14-17

18.5 S

Height adjustment +2/-2mm

D=13+K.x Drawing show application on D=0mm thick mounting plate

5 F>2Fmin F>2Fmin X

X 19.1

D=4+K.x

V V

67.5

19.6

67.5

27.5

Drawing show application on D=0mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 5

1.1

0.4

1.4

0.7

0.1

2.3

1.6

FMIN

Gap Zmin =2

1.20AD

Concealed hinges

Damping adjustment

T-type Glissando 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

17mm

9.5

Ø 35

Item number

701.0B08.054

701.0B10.054

11.9 11.4

Drilling patterns for hinge cups > see page 9

42.5

65.4

26.1

150 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 45

7.5

Cruciform mounting plate > see page 47

Accessories

Cam adjustable linear mounting plate > see page 45 Face frame adapter plate > see page 47

1.20AE

Hinge cup screws If not pre.mounted

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs Cover caps for hinge arm > see complete catalogue page 1.111

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Door adjustment

Side adjustment +3/-1mm For further explanation > see page 19

Mounting details

Mounting plate drilling distance

31.7

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 14-17

Mounting plate thickness table For further explanation > see page 5

0.5

67.6

1.5

3 4

2.5

3.5

0 1

K 3

45ยบ

12.5

Drawings show application on D=0mm thick mounting plate

31.7

0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 2

75.6

K K V

12.5

Drawings show application on D=0mm thick mounting plate

45ยบ P

L=45 for thickness D=0 L=44 for thickness D=1 L=43 for thickness D=2 L=42 for thickness D=3 L=41 for thickness D=4

Door clearance at R=1mm For further explanation > see page 5

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20AF

Concealed hinges

Damping adjustment

T-type Glissando 110/90°

For wood door cabinets with blind panels

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

17mm

Ø 35

Item number

701.0A96.054

701.0A98.054

11.9 11.4

Drilling patterns for hinge cups > see page 9

42.5

65.4

26.1

150 Pcs

Cup made of steel, arm made of zinc

Mounting plates

Hinge cup screws If not pre.mounted

Cam adjustable cruciform mounting plate > see page 45

7.5

Cruciform mounting plate > see page 47

Accessories

Cam adjustable linear mounting plate > see page 45 Face frame adapter plate > see page 47

1.20AG

9.5

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs

Cover caps for hinge arm > see complete catalogue page 1.111

Screw.on ready < screws

Door adjustment

Side adjustment +3/-1mm For further explanation > see page 19

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 14-17

Mounting details

Mounting plate drilling distance

52 21

F 21.5

Drawings show application on D=2mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 5

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20AH

Concealed hinges

Damping adjustment

T-type 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

11.7 3.2

0mm K

9.5

Ø 35

Item number

702.0AK0.054

702.0AL0.054

702.0AK1.054

702.0AL1.054

702.0AK4.054

702.0AL4.054

37.4

62.1

Drilling patterns for hinge cups > see page 9

150 Pcs

Made of steel

Cranking 11.7 3.2

5mm K

37.4

702.0BK0.054

702.0BL0.054

702.0BK1.054

702.0BL1.054

702.0BK4.054

702.0BL4.054

62.1

Drilling patterns for hinge cups > see page 9

150 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre.mounted

Cam adjustable cruciform mounting plate > see page 45

7.5

Cruciform mounting plate > see page 47

Accessories

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs Cover caps for hinge arm > see complete catalogue pages 1.111

Cam adjustable linear mounting plate > see page 45 Face frame adapter plate > see page 47

1.20AI

Push latch > see complete catalogue page 1.109

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

For further explanation > see pages 14-17

Mounting details 18.5

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 5

67.5

37 F>Fmin F>Fmin 10.6

D=13+K.x

Drawing show application on D=0mm thick mounting plate

23.5

67.5

6 X V V

D=8+K.x

15.6

Drawing show application on D=0mm thick mounting plate

Soft closing systems Glissando TL > see page 59

Door clearance at R=1mm For further explanation > see page 5

Glissando CR > see page 63

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20AJ

Concealed hinges

Door adjustment

T-type 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 11.7 3.2

9mm K

37.4

9.5

Ø 35

Item number

702.0CK0.054

702.0CL0.054

702.0CK1.054

702.0CL1.054

702.0CK4.054

702.0CL4.054

62.1

Drilling patterns for hinge cups > see page 9

150 Pcs

Made of steel

Cranking

11.7 3.2

17mm K

702.0DK0.054

702.0DL0.054

702.0DK1.054

702.0DL1.054

702.0DK4.054

702.0DL4.054

37.4

62.1

Drilling patterns for hinge cups > see page 9

150 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre.mounted

Cam adjustable cruciform mounting plate > see page 45

7.5

Cruciform mounting plate > see page 47

Accessories

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs

Cover caps for hinge arm > see complete catalogue page 1.111

Cam adjustable linear mounting plate > see page 45 Face frame adapter plate > see page 47

1.20AK

Push latch > see complete catalogue page 1.109

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

For further explanation > see pages 14-17

Mounting details

27.5

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 5

S 27.5

67.5

K 5

F>2Fmin 19.6

F>2Fmin

X X

D=4+K.x

Drawing show application on D=0mm thick mounting plate

D 37.5

S D

68.6

37.5

37+V F>Fmin 29.6

D=.4+K+F

V V

F>Fmin

Drawing show application on D=2mm thick mounting plate

Soft closing systems Glissando TL > see page 59

Door clearance at R=1mm For further explanation > see page 5

Glissando CR > see page 63

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20AL

Concealed hinges

Door adjustment

T-type 120

For wood doors

· · · ·

120°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

120˚ 35mm 11.9mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 11.9 3.2

0mm K

37.4

9.5

Ø 35

Item number

702.0UK0.054

702.0UL0.054

702.0UK1.054

702.0UL1.054

702.0UK4.054

702.0UL4.054

62.1

Drilling patterns for hinge cups > see page 9

150 Pcs

Made of steel

Cranking

11.9 3.2

9mm 37.4

702.0VL0.054

702.0VK1.054

702.0VL1.054

702.0VK4.054

702.0VL4.054

Drilling patterns for hinge cups > see page 9

62.1

702.0VK0.054

150 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre.mounted

Cam adjustable cruciform mounting plate > see page 49

7.5

Cruciform mounting plate > see page 47

Accessories

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs Cover caps for hinge arm > see complete catalogue page 1.111

Cam adjustable linear mounting plate > see page 49 Face frame adapter plate > see page 47

1.20AM

Push latch > see complete catalogue page 1.109

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 14-17

Mounting details

18.5

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 5

67.5

K 5

37 F>Fmin F>Fmin 10.1

D=13+K.x Drawing show application on D=0mm thick mounting plate

S 27.5

67.5

F>2Fmin

19.1

F>2Fmin

D=4+K.x

Drawing show application on D=0mm thick mounting plate

Soft closing systems Glissando CR > see page 63

Door clearance at R=1mm For further explanation > see page 5

1.1

0.4

1.4

0.7

0.1

2.3

1.6

FMIN

Gap Zmin =2

1.20AN

Concealed hinges

Door adjustment

T-type 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 11.7 3.2

17mm

Ø 35

Item number

702.0B07.054

702.0B09.054

Drilling patterns for hinge cups > see page 9

37.4

62.1

150 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 49

7.5

Cruciform mounting plate > see page 47

Accessories

Cam adjustable linear mounting plate > see page 49 Face frame adapter plate > see page 47

1.20AO

Hinge cup screws If not pre.mounted

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs

Cover caps for hinge arm > see complete catalogue page 1.111

9.5

Screw.on ready < screws

Side adjustment +3/.1mm

Height adjustment +2/.2mm

Depth adjustment +2.5/.2.5mm

For further explanation > see pages 14-17

Mounting details

Mounting plate drilling distance

31.7

Mounting plate thickness table For further explanation > see page 5

0.5

67.6

1.5

3 4

2.5

3.5

0 1

K 3

45ยบ 37

12.5

Drawings show application on D=0mm thick mounting plate

31.7

0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 2

75.6

K 45ยบ V

12.5

Drawings show application on D=0mm thick mounting plate

Soft closing systems Glissando TL > see page 59

L=45 for thickness D=0 L=44 for thickness D=1 L=43 for thickness D=2 L=42 for thickness D=3 L=41 for thickness D=4

Door clearance at R=1mm For further explanation > see page 5

Glissando CR > see page 63

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20AP

Concealed hinges

Door adjustment

T-type 110/90°

For wood door cabinets with blind panels

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 11.7 3.2

17mm

Ø 35

Item number

702.0A95.054

702.0A97.054

Drilling patterns for hinge cups > see page 9

37.4

62.1

150 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 47

7.5

Cruciform mounting plate > see page 49

Accessories

Cam adjustable linear mounting plate > see page 47 Face frame adapter plate > see page 49

1.20AQ

Hinge cup screws If not pre.mounted

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs

Cover caps for hinge arm > see complete catalogue page 1.111

9.5

Screw.on ready < screws

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 14-17

Mounting details

Mounting plate drilling distance

52 21

Drawings show application on D=2mm thick mounting plate

Soft closing systems Glissando TL > see page 59

21.5

Drawings show application on D=2mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 5

Glissando CR > see page 63

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

1.20AR

Concealed hinges

Door adjustment

T-type 170

For wood doors

· · · ·

170°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

165˚ 35mm 12mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Cup type

Cranking

0mm

9.5

Ø 35

Item number

702.0EK0.054

702.0EL0.054

702.0EK1.054

702.0EL1.054

702.0EK4.054

702.0EL4.054

Drilling patterns for hinge cups > see page 9

50 Pcs

Made of steel and zinc

Cranking

9mm

702.0GK0.054

702.0GL0.054

702.0GK1.054

702.0GL1.054

702.0GK4.054

702.0GL4.054

Drilling patterns for hinge cups > see page 9

50 Pcs

Made of steel and zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 47

7.5

Cruciform mounting plate > see page 49

Accessories

Cam adjustable linear mounting plate > see page 47 Face frame adapter plate > see page 49

1.20AS

Hinge cup screws If not pre.mounted

4 16

Legend of hinge cup symbols

820.6328.050 10000 Pcs

Push latch > see complete catalogue page 1.111

Screw.on ready < screws

Machine insertion ready

Easy.fix system

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

For further explanation > see pages 1.17.1.20

Mounting details

Mounting plate drilling distance 52

Mounting plate thickness table For further explanation > see page 5

779

3S S 2

F>Fmin

37 7

-1.4

Drawings show application on D=0mm mounting plate In 90°position the door is only 1.4mm distant from side panel

Soft closing systems Glissando TL 170 > see page 59

79 79

S S

67 V V

7.6 7.6

Drawings show application on D=0mm thick mounting plate

7.6

90 ˚˚

67 67

67 67 V

F>2Fmin F>2Fmin F>2Fmin

370

V V

37 37

F>Fmin

F>Fmin F>Fmin

C C C

19 V

K K

67 67 19

x K

37 37

61 61

S 19

D D

61 61

D=13+K.x

67 67

V V

D=4+K.x Drawings show application on D=0mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 5

Glissando CR > see page 63

0.0

2.6

0.0

5.1

FMIN

Gap ZMIN=0.5

1.20AT

Concealed hinges

Door adjustment

T-type Mounting Plates

â&#x20AC;&#x2DC;3Wayâ&#x20AC;&#x2122; snap-on mounting

Drilling pattern

Dimensions

Cam adjustable cruciform mounting plate 37mm 57.2

150 Pcs

Made of steel

Cam adjustable linear mounting plate 65.2

32 19.9

150 Pcs

1.20AU

Made of steel and zinc

Mounting plate type

Mounting plate thickness

Height adjustment +2/-2mm

10.5

Concealed hinges

min 10.5

Mounting plate thickness (D)

min 11.5 Item number

Item number

0mm

700.0KC0.054

700.0KB0.054

700.0KF0.054

1mm

700.0KC1.054

700.0KB1.054

700.0KF1.054

2mm

700.0KC2.054

700.0KB2.054

700.0KF2.054

3mm

700.0KC3.054

700.0KB3.054

700.0KF3.054

4mm

700.0KC4.054

700.0KB4.054

700.0KF4.054

0mm

700.0LC0.054

700.0LB0.054

700.0LF0.054

2mm

700.0LC2.054

700.0LB2.054

700.0LF2.054

3mm

700.0LC3.054

700.0LB3.054

700.0LF3.054

Ø5

Ø10

Ø5

Legend of mounting plate type symbols

15 Pre.mounted 15mm euro screws

10.5 Machine insertion ready

Pre.mounted 10.5mm expanding dowels

1.20AV

T-type Mounting Plates

‘3Way’ snap-on mounting

Drilling pattern

Dimensions

Cruciform mounting plate 37mm

57.2

150 Pcs

Made of steel

Face frame mounting plate 9

56.8

Ø3

150 Pcs

Made of steel and zinc

Fixing screw for cruciform mounting plate If not pre.mounted

7.5

4 16

Chipboard screws

820.6328.050 10000 Pcs

1.20AW

Mounting plate type

Mounting plate thickness

Height adjustment +2/-2mm

10.5

Concealed hinges

min 10.5

Mounting plate thickness (D)

min 11.5

Item number

0mm

700.0NA0.054

700.0NC0.054

700.0NB0.054

700.0NF0.054

1mm

700.0NA1.054

700.0NC1.054

700.0NB1.054

700.0NF1.054

2mm

700.0NA2.054

700.0NC2.054

700.0NB2.054

700.0NF2.054

3mm

700.0NA3.054

700.0NC3.054

700.0NB3.054

700.0NF3.054

4mm

700.0NA4.054

700.0NC4.054

700.0NB4.054

700.0NF4.054

3.9

Ø5

Ø10

Ø5 Item number

0mm

700.0NW0.054

3mm

700.0NW3.054

Legend of mounting plate type symbols

15 Screw.on ready for chipboard screws < screws

Pre.mounted 15mm euro screws

10.5 Machine insertion ready

Pre.mounted 10.5mm expanding dowels

1.20AX

S-type Glissando Plus 110

For wooden doors

• Opening angle • Drilling diameter for hinge cup • Drilling depth • Hinge on plate mounting system Interaxis

Interaxis

45mm

48mm 9.5

Ø 35 Technical details

Cranking

0mm

Ø 35 Item number

Cup type 13

954.0695.050

954.0807.050

48 6

110°

110˚ 35mm min. 11mm ‘snap-on’

Drilling patterns for hinge cups > see page 1.8

67.6

43.5

100 Pcs

Made of steel and plastic

Cranking

9mm

954.0696.050 954.0808.050

43.5

Drilling patterns for hinge cups > see page 1.8

67.6

28 K

100 Pcs

Made of steel and plastic

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

6.9

3.5 15

Steel mounting plates > see page 1.63

6.9

Legend of hinge cup symbols

820.6308.050 10000 Pcs

3.5 15

Zinc diecast mounting plates > see page 1.63

1.21

Accessories Cover caps for hinge arm > see page 1.111

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Mounting plate drilling distance

37 z

V 7

F>Fmin F>Fmin

Drawings show application on D=0mm thick mounting plate

26.7 26.7 DD

37 37 63 63

K K

x x

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

x 4

z z

S S

Mounting plate thickness table For further explanation > see page 1.5

x 13 14 15 16 17 1 18

17.8 17.8 D D

63 Soft-closing systems

Depth adjustment +1.5/-1.5mm

For further explanation > see pages 1.12 - 1.14

For further explanation > see page 1.17

Mounting details

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-1mm

F>2Fmin F>2Fmin

3737

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

V V 1616

Drawings show application on D=0mm thick mounting plate

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm)

V 16 17 18 19 20 1 21 22

250

200

150

100 50

weight (kg)

i Fm

2 4-7

8-12 13-16 17-22

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.22

S-type Glissando 110

For wooden doors

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ‘snap-on’ Interaxis

Interaxis

45mm

48mm

52mm

Cup type

Technical details 13

Ø 35

Item number

Ø 35 Item number

954.0454.050 954.0793.050 954.0244.050

0mm

48 9.5

5.5

110°

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Made of steel and plastic 28

954.0455.050

954.0794.050

954.0245.050

9mm

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

Made of steel and plastic

100 Pcs

954.0456.050 954.0795.050 954.0246.050

15mm

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Made of steel and plastic

Mounting plates

6.9

3.5 15

Steel mounting plates > see page 1.63

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

6.9

820.6308.050 10000 Pcs

3.5 15

Zinc diecast mounting plates > see page 1.63

1.23

Accessories Cover caps for hinge arm > see page 1.111

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Mounting details

Mounting plate drilling distance 17.8

17.8

63 z

26.7

4 3 2 1 0 5 3 2 1 1

F>2Fmin

V S

35.7

35.7 D

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

V 16 17 18 19 20 1 21 D

Drawings showF>2Fmin x application on D=0mm thick mounting plate

3 3 2 1 0

x 4 5 6 7 8 1 9

26.7 S

Drawings show V application on D=0mm thick mounting plate

37 z

F>Fmin F>Fmin x

Mounting plate thickness table For further explanation > see page 1.5

x 13 14 15 16 17 1 18

Depth adjustment +5/-1.5mm

For further explanation > see pages 1.12 -1.14

For further explanation > see page 1.17

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-1mm

37+V

F>Fmin

3 2 2 2 3 3 1

4 3 3 3 5

37+V

Drawings show application on D=0mm 25 thick mounting plate

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm) 250

200

150

100 50

weight (kg)

2 4-7

8-12 13-16 17-22

i Fm

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.24

S-type Glissando 110/30°

30° angled application for wooden doors

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ‘snap-on’ Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Technical details

Cranking

9mm

Ø 35 Item number

954.0684.650 954.0796.650 954.0247.650

Item number

5.5

9.5

110°

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.61

6.9

3.5 15

6.9

Legend of hinge cup symbols

820.6308.050 10000 Pcs

3.5 15

Accessories Zinc diecast mounting plates > see page 1.63

1.25

Cover caps for hinge arm > see page 1.111

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Mounting details

L 30°

30°

9.5

K x

60.5

30°

Kx P

9.5

3 9 3 2 1

4 9 3 1

2 0

1 3 2 0 D

P 2.5 3.5 4.5 8.5 9.51 10.5 11.5 12.5 13.5

9.5

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9

56.5

Drawings show application on D=3mm thick mounting plate

Mounting plate thickness table For further explanation > see page 1.5

x 2 3 4 9 10 1 11 12 13 14 15

60.5

Mounting plate drilling distance

27 D

Depth adjustment +5/-1.5mm

For further explanation > see pages 1.12 - 1.14

For further explanation > see page 1.17

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-1mm

2 1 1 0

4 9 3 1 2 1 0 5

1 3 2 1 0 D

Drawings show application on D=3mm thick mounting plate

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm)

V 16 17 18 19 20 1 21 22

250

200

150

100 50

weight (kg)

2 4-7

8-12 13-16 17-22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.26

S-type Glissando 110/45°

45° angled application for wooden doors

110°

Interaxis

45mm

48mm

52mm

Cup type

Cranking

9mm

954.0685.650

Ø 35 Item number

954.0797.650

Ø 35 Item number

954.0248.650

Item number

9.5 Ø 35

Technical details

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.61

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted 6.9

3.5 15

6.9

820.6308.050 10000 Pcs

3.5 15

Accessories Zinc diecast mounting plates > see page 1.63

1.27

Cover caps for hinge arm > see page 1.111

Screw-on ready < screws

5.5

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ‘snap-on’

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

x 11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 18

59.5

K L

3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D

V P

4.8

Drawings show application on D=3mm thick mounting plate

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3

P 9 9.5 10 10.5 111 11.5 12 12.5 13.5 S

49.5

59.5

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

Depth adjustment +5/-1.5mm

For further explanation > see pages 1.12 - 1.14

For further explanation > see page 1.17

Mounting details

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-1mm

4 5

1 1 0

1 2

4.8

V P

Drawings show application on D=3mm thick mounting plate

Recommended number per door and positioning

Door clearance For further explanation > see page 3.7

height (cm)

V 16 17 18 19 20 1 21 22

250

200

150

100 50

weight (kg)

i Fm

2 4-7

8-12 13-16 17-22

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.28

S-type Glissando 110/45°

45° angled application for wooden doors

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ‘snap-on’ Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Technical details

Cranking

18mm

Ø 35 Item number

954.0686.650 954.0798.650 954.0249.650

Item number

52 6

9.5

5.5

110°

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

Cup made of steel and plastic, arm made of zinc

100 Pcs Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

6.9

3.5 15

Steel mounting plates > see page 1.61

6.9

Legend of hinge cup symbols

820.6308.050 10000 Pcs

3.5 15

Zinc diecast mounting plates > see page 1.63

1.29

Accessories Cover caps for hinge arm > see page 1.111

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Depth adjustment +5/-1.5mm

For further explanation > see pages 1.12 - 1.14

For further explanation > see page 1.17

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.5

K 3 4 5

D DS S

39 39

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-1mm

0 1 2

37 37

63.5 63.5

° 45 ° 45

K K

37 37

V V

15 15

Drawings show application on D=0mm thick mounting plate

D=18

48 74.5

D=18

48 74.5

Drawings show application on D=18mm thick mounting plate

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm)

V 16 17 18 19 20 1 21 22

250

200

150

100 50

weight (kg)

2 4-7

8-12 13-16 17-22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.30

S-type Glissando 110/90°

For wooden door cabinets with blind panels

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ‘snap-on’ Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Technical details

Cranking

18mm

Ø 35 Item number

954.0687.650 954.0799.650 954.0250.650

Item number

52 6

9.5

5.5

110°

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

50 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

6.9

3.5 15

Steel mounting plates > see page 1.61

6.9

Legend of hinge cup symbols

820.6308.050 10000 Pcs

3.5 15

Zinc diecast mounting plates > see page 1.63

1.31

Accessories Cover caps for hinge arm > see page 1.111

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

For further explanation > see page 1.17

Mounting plate driling distance

Mounting details

63.5

3 V

min75

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm)

i Fm

V 16 17 18 19 20 1 21 22

250

200

150

100

weight (kg)

min75

Drawings show application on D=3mm thick mounting plate

Drawings show application on D=0mm thick mounting plate

2 4-7

8-12 13-16 17-22

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.32

S-type Plus 110

For wooden doors

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

0mm

5.5

52 6

9-5

Ø 35

Item number

248.0T10.050

248.0T70.050

248.0T93.050

248.0T13.050

248.0T71.050

248.0T94.050

248.0T69.050

248.0T72.050

248.0T95.050

Drilling patterns for hinge cups > see page 1.8

Made of steel

200 Pcs Cranking

9mm

248.0V69.050

248.0V71.050

248.0V70.050

248.0V72.050

248.0V56.050

248.0274.050 248.0377.050

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel Hinge cup screws If not pre-mounted

Mounting plates Cam adjustable mounting plate > see page 1.61

6.9

3.5

Legend of hinge cup symbols

820.6308.050

Steel mounting plates > see page 1.61

10000 Pcs 6.9

3.5 15

Zinc diecast mounting plates > see page 1.63

1.33

Screw-on ready < screws

Machine insertion ready

Easy-fix system

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +1.5/-1.5mm

Concealed hinges

· Q uick, comfortable and precise depth adjustment

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

x 13 14 15 16 17 1 18

17.8 17.8 D D

V 7

37 z

Mounting plate thickness table For further explanation > see page 1.5

F>Fmin F>Fmin

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

Drawings show application on D=0mm thick mounting plate

26.7 26.7 DD

37 37 63 63

x 4

K K

z z

S S

x x

3737

F>2Fmin F>2Fmin

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

V V 1616

Drawings show application on D=0mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Glissando CR > see page 1.125

Accessories Cover caps for hinge arm > see page 1.111

Push latch > see page 1.109

Door clearance For further explanation > see page 1.5

V 16 17 18 19 20 1 21 22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.34

S-type Plus 110 Touch opening

For wooden doors without handles

Touch

Electric lifting Interaxis

Interaxis

45mm

48mm

52mm

Cup type

Cranking

Ø 35

Item number

915.0Z85.050*

0mm

52 6

9.5

5.5

110°

915.0Z96.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel

Cranking

915.0007.050*

9mm

915.0032.050*

915.0012.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel

Catches Catch with base plate

Catch

Knock-in pad

Self adhesive pad

915.7102.380*

Catch with base plate

915.7110.380*

Knock-in pad

915.7109.050*

Self adhesive pad

915.7105.050*

Made of plastic

100 Pcs Mounting plates

Steel mounting plates > see page 1.61

Zinc diecast mounting plates > see page 1.63

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

1.35

Catch

6.9

3.5

820.6308.050

10000 Pcs 6.9

3.5 15

Screw-on ready < screws

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’ · Hinge integrated self-opening mechanism · Effortless opening with just a light touch Height adjustment +2/-2mm

Depth adjustment +1.5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details S

x 13 14 15 16 17 1 18

17.8 17.8 D D

V 7

37 z

x 7

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

F>Fmin F>Fmin

4 3 2 1 0 5 3 2 1 1

VDrawings show

application on D=0mm thick mounting plate

x 4

26.7 26.7 DD

K K

z z

37 3763 63

VV 1616

3 3 2 1 0

F>2Fmin F>2Fmin

3737

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

Drawings show application on D=0mm thick mounting plate

Ø10

pre-drilled hole Ø2 / 10 mm

9.5 12

Catch

Catch with base plate

Fixing of pad depends on the catch position

Door clearance For further explanation > see page 1.5

Accessories Cover caps for hinge arm > see page 1.111

V 16 17 18 19 20 1 21 22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.36

S-type Plus 125

For wooden doors

125° Interaxis

Interaxis

45mm

48mm 48 6

9.5

Ø 35 Cup type

Cranking

0mm

Ø 35

Item number

248.0U85.050*

248.0V08.050*

248.0U84.050*

248.0V09.050*

248.0U86.050*

248.0V10.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

6.9

3.5

Legend of hinge cup symbols

820.6308.050

Steel mounting plates > see page 1.63

10000 Pcs 6.9

3.5 15

Zinc diecast mounting plates > see page 1.63

1.37

Screw-on ready < screws

Machine insertion ready

Easy-fix system

• Opening angle 125˚ • Drilling diameter for hinge cup 35mm • Drilling depth 12.5mm • Hinge on plate mounting system ‘snap-on’ · E nables better accessibility due to the wider opening angle · Q uick, comfortable and precise depth adjustment Height adjustment +2/-2mm

Depth adjustment +1.5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

x 13 14 15 16 17 1 18 19

z>zz>z min min F>Fmin F>Fmin

37 63

18.518.5 D D

S S

37 37

4 4

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

6 3 2 1

0 1 0 D

r 1 3 4 5 6

Drawings show application on D=0mm thick mounting plate 27.5

g D

0.4 1.2 1.7 2.1 2.5

ZMIN = (K-2) x 0.7 + (V-16) x 0.5 -g

Mounting plate thickness table For further explanation > see page 1.5

F>2Fmin

Drawings show application on D=9mm thick mounting plate

Soft closing systems

Glissando TL > see page 1.21

Glissando CR > see page 1.125

Accessories Cover caps for hinge arm > see page 1.111

Push latch > see page 1.109

Door clearance For further explanation > see page 1.5 n

i Fm

V 16 17 18 19 20 1 21 22 23 24

3 0.5 1.5 1.9 2.4 2.91 3.4 4.1 4.8 5.6 K 4 1.2 1.5 1.8 2.2 2.71 3.3 3.8 4.5 5.2 5 1.1 1.4 1.8 2.2 2.61 3.1 3.6 4.3 4.9 6 1.1 1.4 1.7 2.1 2.51 2.9 3.5 4.0 4.7 FMIN Gap ZMIN=0

1.38

S-type 110

For wooden doors

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

0mm

5.5

9.5

Ø 35

Ø 35 Item number

Item number

248.0535.050*

248.0532.050*

248.0538.050*

248.0171.050*

248.0172.050*

248.0400.050*

248.0186.050*

248.0188.050*

248.0366.050*

248.0197.050*

200 Pcs

Drilling patterns for hinge cups > see page 1.8

Made of steel

Cranking

9mm

248.0536.050*

248.0533.050*

248.0539.050*

248.0279.050*

248.0327.050*

248.0401.050*

248.0482.050*

248.0545.050*

248.0549.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel

Cranking

15mm

248.0537.050*

248.0534.050*

248.0540.050*

248.0280.050*

248.0328.050*

248.0402.050*

248.0487.050*

248.0547.050*

248.0551.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.61

Zinc diecast mounting plates > see page 1.63

1.39

6.9

3.5

Legend of hinge cup symbols

820.6308.050

15 6.9

3.5 15

10000 Pcs

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Pre-mounted expando dowels

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’ Q uick and practical assembly of the hinge and mounting plate by pressing gently on the rear part of the hinge arm O ne button disassembly

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

· ·

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

17.8

x 13 14 15 16 17 1 18

17.8 D

V 7

37 z

F>FminF>Fmin x

x 7

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

x 4 5 6 7 8 1 9

K K

z z

37 37

63 63

37 37

F>2Fmin F>2Fmin

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

Drawings show application on D=0mm thick mounting plate S

35.7

V 16 17 18 19 20 1 21

35.7 D

F>Fmin F>Fmin 25

V Drawings show application on D=0mm thick mounting plate 26.7 26.7

16 16

Mounting plate thickness table For further explanation > see page 1.5

37+V

3 2 2 2 3 3 1

4 3 3 3 5

37+V

Drawings show

25 application on D=3mm

thick mounting plate

Soft closing systems

Accessories

Door clearance For further explanation > see page 1.5

Glissando TL > see page 1.121

Cover caps for hinge arm > see page 1.111

Glissando CR > see page 1.125

Push latch > see page 1.109

V 16 17 18 19 20 1 21 22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.40

S-type 110/-15°

alCE 191.3 Tf -15° angled application for wooden doors

110 deg

110° Interaxis

Interaxis

45mm

48mm

52mm

5.5

52 6

9.5

110 deg

Ø 35 Cup type

Cranking

0 mm

Ø 35

Item number

248.0V14.050

248.0V39.050

248.0V40.050

248.0V41.050

248.0V42.050

248.0V43.050

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel, arm made of zinc Hinge cup screws If not pre-mounted

Mounting plates Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.61

Zinc diecast mounting plates > see page 1.63

1.41

6.9

3.5 15

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

1155°°

10 10

x 4 5 6 10 11 1 12 13 14 15 K

43 43 69 69

18 18

Mounting plate thickness table For further explanation > see page 1.5

3 9 3 2 1

1 0

4 9 3 1

2 1 0

43 43

Drawings show application on D=0mm thick mounting plate

Accessories

Door clearance For further explanation > see page 1.5 Cover caps for hinge arm > see page 1.111

F>Fm

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.42

S-type 110/15°

15° angled application for wooden doors

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

9mm

5.5

52 6

9.5

Ø 35

Item number

248.0080.050

248.0V62.050

248.0C66.050

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.61

Zinc diecast mounting plates > see page 1.63

1.43

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted 6.9

3.5

820.6308.050

10000 Pcs 6.9

3.5 15

Screw-on ready < screws

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

10 11 12

K S x

15°

3 9 3 2 1

1 0

4 9 3 1

15°

14.5 L

61.5

Mounting plate thickness table For further explanation > see page 1.5

x,P 1

61.5

Mounting plate drilling distance

Drawings show application on D=0 K 29 and K=4mm D thick mountingSplate

59.5

L=37 for thickness D=0 L=36 for thickness D=1 L=36Lfor thickness D=2 L=35 for thickness D=3 L=33 for thickness D=9

15°

14.5

15°

59.5

14.5

K P

14.5

Drawings show application on D=0 and K=4mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Accessories

Door clearance For further explanation > see page 1.5

Cover caps for hinge arm > see page 1.111

i Fm

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.44

S-type 110/24°

24° angled application for wooden doors

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

9mm

5.5

52 6

9.5

Ø 35

Item number

248.0V18.050

248.0V45.050

248.0Z29.050

248.0V47.050

248.0V48.050

248.0V49.050

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.63

Zinc diecast mounting plates > see page 1.63

1.45

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

6.9

3.5 15

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

x 3 4 5 9 10 1 11 12 13 14

24.5

37 63.5

24° 8

Mounting plate thickness table For further explanation > see page 1.5

3 9 3 2 1

1 0

4 9 3 1

2 1 0

3 2 1 0 D

37 x

Drawings show application on D=0mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Accessories

Door clearance For further explanation > see page 1.5

Cover caps for hinge arm > see page 1.1110

V 16 17 18 19 20 1 21 22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.46

S-type 110/30°

30° angled application for wooden doors

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35

5.5

Ø 35

Ø 35 Item number

Item number

248.0675.050

248.0665.050

248.0677.050

248.0N12.050

248.0N13.050

248.0N14.050

Cup type

Cranking

9mm

52 6

9.5

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Cup made of steel, arm made of zinc Hinge cup screws If not pre-mounted

Mounting plates Cam adjustable mounting plate > see page 1.61

6.9

3.5

Legend of hinge cup symbols

820.6308.050

Steel mounting plates > see page 1.63

10000 Pcs 6.9

3.5 15

Zinc diecast mounting plates > see page 1.63

1.47

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details 27 D

L 30°

30°

9.5

4 9 3 1

2 0

1 3 2 0 D

P 2.5 3.5 4.5 8.5 9.51 10.5 11.5 12.5 13.5

30°

2 1 1 0

4 9 3 1 2 1 0 5

1 3 2 1 0 D

9.5

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9

60.5

56.5

D D

9.5

3 9 3 2 1

Drawings show application on D=3mm thick mounting plate

Mounting plate thickness table For further explanation > see page 1.5

x 2 3 4 9 10 1 11 12 13 14 15

60.5

Mounting plate drilling distance

Drawings show application on D=3mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Door clearance For further explanation > see page 1.5

Accessories Cover caps for hinge arm > see page 1.111

i Fm

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.48

S-type 110/45°

45° angled application for wooden doors

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

9mm

5.5

52 6

9.5

Ø 35

Ø 35 Item number

Item number

248.0433.050

248.0431.050

248.0518.050

248.0N16.050

248.0N17.050

248.0N18.050

Drilling patterns for hinge cups > see page 3.10

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.63

Zinc diecast mounting plates > see page 1.63

1.49

6.9

3.5 15

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details 29

x 11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 18

59.5

K L

° 45

3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D

V P

4.8

Drawings show application on D=3mm thick mounting plate

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3

P 9 9.5 10 10.5 111 11.5 12 12.5 13.5 D

49.5

59.5

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

4 5

1 1 0

1 2

K ° 45

4.8

V P

Drawings show application on D=3mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Door clearance For further explanation > see page 1.5

Accessories Cover caps for hinge arm > see page 1.111

i Fm

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.50

S-type 110/45°

45° angled application for wooden doors

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

18mm

5.5

52 6

9.5

Ø 35

Item number

248.0285.050

248.0283.050

248.0291.050

248.0N20.050

248.0N21.050

248.0N22.050

Item number

Drilling patterns for hinge cups > see page 1.8

Cup made of steel, arm made of zinc

100 Pcs Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

6.9

3.5 15

Steel mounting plates > see page 1.63

6.9

3.5 15

Zinc diecast mounting plates > see page 1.63

1.51

Legend of hinge cup symbols

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

K 3 4 5

D DS S

39 39

Mounting plate thickness table For further explanation > see page 1.5

0 1 2

37 37

63.5 63.5

° 45 ° 45

K K

37 37

V V

48 74.5

D=18

48 74.5

15 15

Drawings show application on D=18mm thick mounting plate

Soft closing systems

Glissando TL > see page 1.121

Accessories

Door clearance For further explanation > see page 1.5

Cover caps for hinge arm > see page 1.111

i Fm

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.52

S-type 110/90°

For wooden door cabinets with blind panels

110° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

18 mm

5.5

52 6

9.5

Ø 35

Item number

Ø 35 Item number

Item number

248.0745.050

248.0742.050

248.0748.050

248.0N24.050

248.0N25.050

248.0N26.050

248.0L61.050

248.0N62.050

248.0Z81.050

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel, arm made of zinc Hinge cup screws If not pre-mounted

Mounting plates Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.63

Zinc diecast mounting plates > see page 1.63

1.53

6.9

3.5 15

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Easy-fix system

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting plate drilling distance

Mounting details

63.5

37 19

min75

Drawings show application on D=3mm thick mounting plate

Drawings show application on D=0mm thick mounting plate

Soft closing systems

Glissando TL > see page 1.121

Accessories Cover caps for hinge arm > see page 1.111

min75

Door clearance For further explanation > see page 1.5

V 16 17 18 19 20 1 21 22 K

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN

1.54

S-type 110

For aluminium frame doors

110Â° Interaxis

28mm 28

19 Cup type

Cranking

950.0T27.050*

0mm

Cup made of zinc, arm made of steel

200 Pcs Mounting plates

Legend of hinge cup symbols

Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.63

Zinc diecast mounting plates > see page 1.63

1.55

Item number

Screw-on ready < screws

• Opening angle 110˚ • Hinge on plate mounting system ‘snap-on’

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

2 7 H

17 3 2 1 0

63 37 63

18 3 2 1 0 G 19 3 2 1 1 20 3 21

x 12 13 14 15 16 1 17 18

17.8 17.8 D D

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

2 F>Fmin F>Fmin G

0 1 0 D

Drawings show application on D=0mm thick mounting plate

10 1.5 5.5 42

G 19 28

90˚ Ø7.0

Drilling pattern for aluminium frame hinges

Accessories

Screws included

Door clearance For further explanation > see page 1.5 Cover caps for hinge arm > see page 1.111

H 17 18 19 20 21 1 22 G

i Fm

17 0.5 0.7 1.1 1.4 1.81 2.9 18 0.5 0.7 1.0 1.3 1.71 2.5 19 0.5 0.7 0.9 1.2 1.61 2.1

20 0.5 0.7 0.9 1.2 1.51 2.0 FMIN Gap ZMIN=0.5

1.56

S-type 170

For wooden doors

135°-165° Interaxis

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Cranking

0mm

Item number

5.5

52 6

9.5

Ø 35

Ø 35 Item number

Item number

248.0R14.050

248.0R17.050

248.0R15.050

248.0M73.050

248.0R13.050

248.0M74.050

248.0198.050 Drilling patterns for hinge cups > see page 1.8

50 Pcs

Made of steel and zinc

Cranking

248.0R18.050

0mm

*248.0V65.050 *248.0S69.050

With adjustable opening angle

Drilling patterns for hinge cups > see page 1.8 * Available upon special request > see page 0.3

50 Pcs

Made of steel and zinc

Adjustable opening angle

Cranking

248.0162.050

9mm

248.0163.050

Drilling patterns for hinge cups > see page 1.8

50 Pcs

Made of steel and zinc

Mounting plates

Steel mounting plates > see page 1.63

Zinc diecast mounting plates > see page 1.63

1.57

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 1.61

6.9

3.5 15

820.6308.050 10000 Pcs

6.9

3.5 15

Screw-on ready < screws

Machine insertion ready

Pre-inserted expando dowels

135˚-165˚ 35mm 12mm ‘snap-on’

· E nables better accessibility into cabinet interior due to the wider opening angle · O pening angle can be easily adjusted by rotating the appropriate screw on the hinge arm

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

• Opening angle • Drilling diameter for hinge cup • Drilling depth • Hinge on plate mounting system

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

X 10 11 12 13 14 1 15 16 17 18 19 20

19 D

3 2 1 0

1.4

6 6 5 1

4 3 2 1 0

7 6 1

5 4 3 2 1 0 D

Drawings show application on D=0mm mounting plate

C value with D=0 mounting plates

In 90°position the door is only 1.4mm distant from side panel

70 70 70 70 SS

Glissando CR > see page 1.125

S S

79 79 79 79

S SS

37 67 V67 67 67

V67 67 67 67

V V

F>2Fmin F>2Fmin F>2Fmin F>2Fmin

7.6 909090 90 ˚˚ ˚ ˚

Glissando TL 170 > see page 1.123

F>2Fmin

Soft closing systems

67 F>Fmin F>Fmin F>Fmin F>Fmin

Drawings show CCC C application on D=0mm thick mounting plate

-9.0 -8.1 -7.1 -6.1 -5.2

V V V V

37 37 37 37

19 67 67 67 67

F>Fmin xx x x

19 19 19 19

KKK K

61 61 6161 SS SS DD DD

191919 61 616161 19 DD D D

K 3 4 5 6 7

37 37

1.4

5 6 5 4 1

37 37

2 1 0

90 ° 7

4 6 5 4 3 1

F>Fmin

1 0

67 67 V 67 67

F>Fmin

3 6 5 4 3 2 1

V V

7.6 7.6 7.67.6

Drawings show application on D=0mm thick mounting plate

Drawings show application on D=9mm thick mounting plate

Drawings show application on D=18mm thick mounting plate.

Door clearance For further explanation > see page 1.5

V 16 17 18 19 20 1 21 22 23 24 K

i Fm

3 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 4 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 5 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0

Accessories Push latch > see page 1.109

6 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 2.6 7 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 5.1 FMIN Gap ZMIN=0.5

1.58

110 deg

S-type for Pie-cut Corner Cabinet

For wooden doors

Interaxis

45mm

48mm

52mm

Ø 35 Cup type

Corner cabinet

Item number

5.5

52 6

9.5

Ø 35 Item number

248.0U21.050

248.0U16.050

248.0308.050

248.0U22.050

248.0V15.050

248.0Z20.050

Drilling patterns for hinge cups > see page 1.8

Cup made of steel, arm made of zinc

100 Pcs

Hinge cup screws If not pre-mounted

Mounting plates Cam adjustable mounting plate > see page 1.61 Steel mounting plates > see page 1.63

Zinc diecast mounting plates > see page 1.63

1.59

6.9

3.5 15

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system ‘snap-on’ · S tandard drilling for hinge and mounting plate · H inge integrated adjustment Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Adjustments

Drilling details

V = 16 - 22 mm K = 3 - 5 mm

Any S-type-i mounting plate of thickness D=0 can be used The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing

-2 11.5 +3 -1 +5

-1.5

D=3

Accessories Cover caps for hinge arm > see page 1.111

1.60

S-type Mounting Plates

For all S-type concealed hinges

Drilling pattern

Dimensions

Cam adjustable mounting plate

200 Pcs

1.61

Made of steel

Mounting plate thickness Mounting plate type

Concealed hinges

min 11

Height adjustment +/- 2mm

10.5

min 9.5

Ø5

Item number

min 11.5

Ø5

Item number

Mounting plate thickness (D)

Ø4.5

min 10.5

min 11.5 Ø3

Item number

min 10.5 Ø5

Ø10

Item number

0mm

244.0258.050

244.0261.050

244.0264.050*

244.0342.050*

244.0270.050

2mm

244.0259.050

244.0262.050

244.0265.050*

244.0343.050*

244.0271.050

3mm

244.0260.050

244.0263.050

244.0266.050*

244.0344.050*

244.0272.050

* Available upon special request > see page 0.3

Legend of mounting plate type symbols

13 Pre-mounted 13mm euro screws

15 Pre-mounted 15mm euro screws

10.5 Pre-mounted chipboard screws

Machine insertion ready

Pre-mounted 10.5mm expanding dowels

1.62

S-type Mounting Plates

For all S-type concealed hinges

Drilling pattern

Dimensions

Steel mounting plates

60 58

Made of steel

200 Pcs Zinc diecast mounting plates

Made of zinc

200 Pcs Fixing screws for mounting plates If not pre-mounted

Ø6.3

Ø8

Ø6.3

Euro screws

7.5 821-6304-050 L=114 16 821-6323-050 L=13 821-6332-050 L=15

5000 Pcs

1.63

7.5

Chipboard screws

820.6328.050

10000 Pcs

Mounting plate thickness

Height adjustment +/- 2mm

Item number

Ø3

Ø5

Item number

Ø10

Item number

min 10.5

Ø4.5 min 10.5

13 min 10

11 min 8

Mounting plate thickness (D)

Item number

Ø6.3

Ø5

3.9

10.5

Ø6.3

5.8

min 11

min 12

Mounting plate type

Ø5

Item number

0mm

244.1136.050 244.1233.050*

244.0Z26.050 244.0134.050

1mm

244.1137.050 244.1228.050*

244.0561.050

2mm

244.1138.050 244.1229.050*

244.0Z63.050 244.0562.050

244.0120.050 244.0566.050* 244.0568.050* 244.0V19.050

3mm

244.1139.050 244.1234.050*

244.0135.050

244.0119.050 244.0137.050* 244.0167.050* 244.0P27.050

6mm

244.1645.050

244.0118.050 244.0136.050* 244.0166.050* 244.0P26.050 244.0565.050* 244.0567.050*

244.0Z51.050

* Available upon special request > see page 0.3

* Mounting plates with premounted 7.5mm expanding dowels available upon special request > see page 0.3

9mm

244.3651.650

244.0M33.650 244.0P29.650

18mm

244.3016.650

244.0085.650

244.0095650

* Available upon special request > see page 0.3

Legend of mounting plate type symbols

11 Screw on ready for euro screws < screws, see previous page

Screw-on ready for chipboard screws

Pre-mounted 11mm euro screws

Pre-mounted 13mm euro screws

Pre-mounted 15mm euro screws

10.5 Pre-mounted chipboard screws

Machine insertion ready

Pre-mounted 10.5mm expanding dowels

1.64

Concealed hinges

B-type Glissando 110

For wooden doors

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on

110°

Interaxis

45 mm

48 mm 48

Technical details

Cranking

Ø 35

Item number

954.0688.050* 954.0800.050*

0mm

Cup type

9.5

43.5

Drilling patterns for hinge cups > see page 1.8

67.6

100 Pcs

Made of steel and plastic

Cranking

954.0689.050* 954.0801.050*

9mm

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Made of steel and plastic

Cranking

954.0690.050* 954.0802.050*

15mm

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Made of steel and plastic

Mounting plates

Steel mounting plates > see page 1.93

6.9

3.5 15

6.9

Zinc diecast mounting plates > see page 1.93

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

820.6308.050 10000 Pcs

3.5 15

Accessories Cover caps for hinge arm > see page 1.111

1.65

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

For further explanation > see page 1.17

17.8 D

x 10 11 12 13 14 1 15 16 17 18

17.8

Drawings show x application on D=0mm V thick mounting plate 7

61.5

F>Fmin

61.5

x 7

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

F>Fmin

26.7

61.5

z61.5

Drawings show application on D=0mm thick mounting plate

1 0

4 6 5 4 3 1

2 1 0

5 6 5 4 1

3 2 1 0 D

3 6 5 4 3 1 K 4 6 5 4 1 5 9 6 5 1

1 5 6 7 8 9 2 1 0 3 2 1 0 4 3 2 1 0 D

35.7

V 16 17 18 19 20 1 21 22

35.7 D

61.5

37 61.5

F>2Fmin

3 6 5 4 3 2 1

x 0 1 2 3 4

26.7S

Depth adjustment +4/-0mm

For further explanation > see pages 1.12 - 1.14

Mounting details S

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-0.5mm

F>Fmin

Drawings show F>Fmin application on D=3mm thick mounting plate

25 V 25

height (cm)

3 4

4 3 3 3 4 4 1

4 5

5 4 4 4 5 5 1

5 6 D

V 16 17 18 19 20 1 21 22

250

200

150

100

weight (kg)

3 2 2 2 3 3 1

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning

37+V 37+V

2 4-7

8-12 13-16 17-22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.66

B-type Glissando 110/30°

30° angled application for wooden doors

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on

110°

Interaxis

45 mm

48 mm 48

Ø 35 Technical details

Cranking

9mm

Cup type 13

Ø 35 Item number

954.0691.650* 954.0803.650*

Item number

9.5

Drilling patterns for hinge cups > see page 1.8

67.6

43.5

Cup made of steel and plastic, arm made of zinc

100 Pcs Mounting plates

Steel mounting plates > see page 1.93

6.9

1.67

3.5 15

6.9

Zinc diecast mounting plates > see page 1.93

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

820.6308.050 10000 Pcs

3.5 15

Accessories Cover caps for hinge arm > see page 1.111

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

For further explanation > see page 1.17

Mounting plate drilling distance

3 9 3 2 1 0 4 9 3 1 5

2 0 3 2 0 D

Drawings show application on D=3mm 38.5 thick mounting plate

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9

63.5

45°

D 27

K 30°

56.5

9.5

30°

P 2.5 3.5 4.5 8.5 9.51 10.5 11.5 12.5 13.5

K P

9.5

3 9 3 2 1

1 0

4 9 3 1

2 1 0

1 3 2 1 0 D

D=18

45°

Drawings show application on D=3mm thick mounting plate

30°

9.5

Mounting plate thickness table For further explanation > see page 1.5

x 2 3 4 9 10 1 11 12 13 14 15

Depth adjustment +4/-0mm

For further explanation > see pages 1.12 - 1.14

Mounting details 27

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-0.5mm

K 19

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm) 250

200

150

100 50

weight (kg)

i Fm

2 4-7

8-12 13-16 17-22

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.68

B-type Glissando 110/45°

45° angled application for wooden doors

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on

110°

Interaxis

45 mm

48 mm 48

Ø 35 Cup type

Technical details

Cranking

9mm

Item number

9.5

Ø 35 Item number

954.0692.650* 954.0804.650*

28 K

Drilling patterns for hinge cups > see page 1.8

67.6

43.5

Cup made of steel and plastic, arm made of zinc

100 Pcs

Steel mounting plates > see page 1.93

6.9

3.5 15

6.9

Zinc diecast mounting plates > see page 1.93

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

Mounting plates

820.6308.050 10000 Pcs

3.5 15

Accessories Cover caps for hinge arm > see page 1.111

1.69

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

For further explanation > see page 1.17

K 45°

45°

4.8

Drawings show application on D=3mm thick mounting plate S

28.5

K 45° V

4.8

Mounting plate thickness table For further explanation > see page 1.5

x 11.5 12.5 13 13.5 141 14.5 15 15.5 16 16.5 17 18

Mounting plate drilling distance

28.5

Depth adjustment +4/-0mm

For further explanation > see pages 1.12 - 1.14

Mounting details 28.5

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-0.5mm

4 3 21 5

1 1 0 1 0 1

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3

P 9 9.5 10 10.5 11 11.5 12 12.5 13.5 K

3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D

Drawings show application on D=3mm thick mounting plate

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm)

V 16 17 18 19 20 1 21 22

250

200

150

100 50

weight (kg)

2 4-7

8-12 13-16 17-22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.70

B-type Glissando 110/45°

45° angled application for wooden doors

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on

110°

Interaxis

45 mm

48 mm 48

Ø 35 Cup type

Technical details

Cranking

18mm

Item number

9.5

Ø 35 Item number

954.0693.650* 954.0805.650*

43.5

Drilling patterns for hinge cups > see page 1.8

67.6

Cup made of steel and plastic, arm made of zinc

100 Pcs

Hinge cup screws If not pre-mounted

Mounting plates

Steel mounting plates > see page 1.93

6.9 15 6.9

Zinc diecast mounting plates > see page 1.93

3.5

Legend of hinge cup symbols

820.6308.050 10000 Pcs

3.5 15

Accessories Cover caps for hinge arm > see page 1.111

1.71

Screw-on ready < screws

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Mounting details

Mounting plate drilling distance

38.5

45° 45°

K K

Mounting plate thickness table For further explanation > see page 1.5

63.5 63.5

Depth adjustment +4/-0mm

For further explanation > see pages 1.12 - 1.14

For further explanation > see page 1.17

38.5

Height adjustment +2/-2mm

Concealed hinges

Side adjustment +3/-0.5mm

3 0 4 1 5 2 D

Drawings show application on D=0mm thick mounting plate 19

56.5

48 73 73

D=18D=18

56.5

45° 45°

Drawings show application on D=18mm thick mounting plate

Recommended number per door and positioning

Door clearance For further explanation > see page 1.5

height (cm) 250

200

150

100 50

weight (kg)

i Fm

2 4-7

8-12 13-16 17-22

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

For further explanation > see page 1.11

1.72

B-type Glissando 110/90°

For wooden door cabinets with blind panels

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on

110°

Interaxis

45 mm

48 mm 48

Cup or mounting plate type

Technical details

Cranking

18mm

Item number

Ø 35 Item number

954.0694.650* 954.0806.650*

Ø 35

9.5

43.5

67.6

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel and plastic, arm made of zinc

Blind panel mounting plate

244.0810.650* 15

244.0P28.650*

This mounting plate can be used only with B-type-i 110/90° hinges. Information about mounting plate symbols > see page 1.94

200 Pcs

Made of zinc

Mounting plates

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

6.9

These hinges can only be used with blind panel mounting plates

3.5 15

6.9

820.6308.050 10000 Pcs

3.5 15

Accessories Cover caps for hinge arm > see page 1.111

1.73

Screw-on ready < screws

Pre-mounted euro screw

Damping adjustment

Door adjustment

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

For further explanation > see page 1.17

Mounting details

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +3/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting plate drilling distance

K F

min22

Door clearance For further explanation > see page 1.5

Recommended number per door and positioning height (cm)

V 16 17 18 19 20 1 21 22

250

200

150

100 50

weight (kg)

2 4-7

8-12 13-16 17-22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2 FMIN Gap Z=0

For further explanation > see page 1.11

1.74

B-type 110

For wooden doors

Interaxis

45 mm

48 mm

52mm

Ø 35 Cup type

Cranking

Item number

52 6

9.5

Ø 35 Item number

5.5

110°

Ø 35 Item number

248.0G54.050* 248.0G49.050* 248.0G59.050*

0mm

248.0G79.050* 248.0K40.050* 248.0L63.050* Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel

Cranking

248.0G55.050* 248.0G50.050* 248.0G60.050*

9mm

248.0G80.050* 248.0K76.050* Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel 248.0G56.050* 248.0G51.050* 248.0G61.050*

Cranking

15mm

248.0G81.050* 248.0L04.050* Drilling patterns for hinge cups > see page 1.8

200 Pcs

Made of steel Hinge cup screws If not pre-mounted

Mounting plates Steel mounting plates > see page 1.93 Zinc diecast mounting plates > see page 1.93

1.75

6.9

3.5 15

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +3/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting details

x 10 11 12 13 14 1 15 16 17 18

17.8 D

17.8

61.5

61.5 z

K V

F>2Fmin

2 1 0

5 6 5 4 1

3 2 1 0 D

1 5 6 7 8 9

3 6 5 4 3 1 K 4 6 5 4 1 5 9 6 5 1

2 1 0 3 2 1 0 4 3 2 1 0 D

Drawings show application on D=0mm thick mounting plate

V 16 17 18 19 20 1 21 22

35.735.7

61.5

61.5 37

K 16

4 6 5 4 3 1

x 0 1 2 3 4

26.7

F>2Fmin

x V

1 0

Drawings show V application on D=0mm thick mounting plate

26.7 S D

3 6 5 4 3 2 1

F>Fmin

D 61.5

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

37+V37+V F>Fmin F>Fmin V

25 25

3 2 2 2 3 3 1

3 4

4 3 3 3 4 4 1

4 5

5 4 4 4 5 5 1

5 6 D

Drawings show application on D=3mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Glissando CR > see page 1.125

Accessories

Door clearance For further explanation > see page 1.5 Cover caps for hinge arm > see page 1.111

Push latch > see page 1.109

V 16 17 18 19 20 1 21 22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.76

B-type 110/30°

30° angled application for wooden doors

Interaxis

45 mm

48 mm

52mm

Ø 35 Cup type

Cranking

9mm

Item number

52 6

9.5

Ø 35 Item number

248.0G57.050*

248.0G52.050* 248.0G62.050*

248.0G82.050*

248.0L72.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates Steel mounting plates > see page 1.93

6.9

3.5 15

Zinc diecast mounting plates > see page 1.93

1.77

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

6.9

3.5 15

820.6308.050 10000 Pcs

5.5

110°

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +3/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

x 2 3 4 9 10 1 11 12 13 14 15

30°

9.5

Drawings show application on D=3mm

27 15

V D

73 48

D=18 73

30°

D=18

3 2 0 D

3 9 3 2 1

1 0

4 9 3 1

2 1 0

1 3 2 1 0 D

19 30°

9.5

1956.5

56.5

P 2.5 3.5 4.5 8.5 9.51 10.5 11.5 12.5 13.5

2 0

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9

63.5

45°

4 9 3 1

38.5 38.5 thick mounting plate

3 9 3 2 1 0

Mounting plate thickness table For further explanation > see page 1.5

K P

K 30

45°

Drawings show application on D=3mm K K thick mounting plate 19

Soft closing systems Glissando TL > see page 1.121

Accessories Cover caps for hinge arm > see page 1.111

Door clearance For further explanation > see page 1.5 n

i Fm

V 16 17 18 19 20 1 21 22

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.78

B-type 110/45°

45° angled application for wooden doors

Interaxis

45 mm

48 mm

52mm

Ø 35 Cup type

Cranking

9mm

9.5

Ø 35

Item number

248.0L32.650*

248.0L27.650* 248.0M83.650*

248.0N38.050*

248.0L71.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Steel mounting plates > see page 1.93 Zinc diecast mounting plates > see page 1.93

6.9

3.5 15

1.79

3.5 15

5.5

110°

Legend of hinge cup symbols

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +3/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

x 11.5 12.5 13 13.5 141 14.5 15 15.5 16 16.5 17 18

45°

4.8

Drawings show application on D=3mm thick mounting plate

4 3 21

1 1 0

1 0 1

P 9 9.5 10 10.5 11 11.5 12 12.5 13.5 K

K 45° V

4.8

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3

28.5

28.5 28.5

Mounting plate thickness table For further explanation > see page 1.5

3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D

Drawings show application on D=3mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Door clearance For further explanation > see page 1.5

Accessories Cover caps for hinge arm > see page 1.111

i Fm

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.80

B-type 110/45°

45° angled application for wooden doors

Interaxis

45 mm

48 mm

52mm

Ø 35 Cup type

Cranking

18mm

52 6

9.5

Ø 35

Item number

248.0L33.050*

248.0L28.050* 248.0M84.050*

248.0L46.050*

248.0L70.050*

Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted Steel mounting plates > see page 1.93

6.9

3.5 15

Zinc diecast mounting plates > see page 1.93

1.81

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

5.5

110°

Screw-on ready < screws

Machine insertion ready

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +3/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.5

38.5

3 0 4 1 5 2 D

63.5 63.5

38.5

45° 45°

K V

37 37

Drawings show application on D=0mm thick mounting plate 19

56.5

48 73 73

D=18D=18

56.5

45° 45°

Drawings show application on D=18mm thick mounting plate

Soft closing systems Glissando TL > see page 1.121

Accessories

Door clearance For further explanation > see page 1.5 Cover caps for hinge arm > see page 1.111

V 16 17 18 19 20 1 21 22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.82

B-type 110/90°

For wooden door cabinets with blind panels

Interaxis

45 mm

48 mm

52mm

Cup or mounting plate type

Cranking

18mm

Ø 35 Item number

9.5

Ø 35

5.5

110°

Ø 35

Item number

248.0G58.050*

248.0G53.050* 248.0G63.050*

248.0G83.050*

248.0L73.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Cup made of steel, arm made of zinc 248.0255.050* 248.0V66.050*

Cranking

0mm

200 Pcs

Drilling patterns for hinge cups > see page 1.8

Cup made of steel, arm made of zinc

Blind panel mounting plate

200 Pcs

244.0810.650* 11

244.0813.650*

244.0C32.650*

244.0P28.650

This mounting plate can be used only with B-type 110/90° hinges. Information about mounting plate symbols > see page 1.94

Made of zinc

Mounting plates

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

These hinges can only be used with blind panel mounting plates

6.9

3.5 15

6.9

3.5 15

1.83

248.0V53.050*

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Pre-mounted euro screws

• Opening angle 110˚ • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system slide-on

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +3/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

K F

min22

19 V

9 K min22

Door clearance For further explanation > see page 1.5

V 16 17 18 19 20 1 21 22 K

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2 FMIN

Gap Z=0

1.84

B-type 110

For aluminium frame doors

110Â° Aluminium frame cup

28â&#x20AC;&#x2030;mm 28

19 Cup type

Cranking

950.0T26.050*

0mm

200 Pcs

Cup made of zinc, arm made of steel

Mounting plates Steel mounting plates > see page 1.93 Zinc diecast mounting plates > see page 1.93

1.85

Item number

Screw-on ready < screws

• Opening angle 110˚ • Hinge on plate mounting system slide-on

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +3/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

17.8

Mounting plate thickness table For further explanation > see page 1.5

x 12 13 14 15 16 1 17 18

17.8 D

61.5 37

2 F>Fmin F>Fmin G

7+D

61.5

17 3 2 1 0

18 4 3 2 1 0 G 19 5 4 3 2 1 1 0 20 6 5 4 3 2 1 1 0 D

7+D

10 1.5 5.5 42

G 19 28

90˚ Ø7.0

Drilling pattern for aluminium frame hinges

Screws included

Door clearance For further explanation > see page 1.5

Accessories Cover caps for hinge arm > see page 1.111

H 17 18 19 20 21 1 22 G

i Fm

17 0.5 0.7 1.1 1.4 1.81 2.9 18 0.5 0.7 1.0 1.3 1.71 2.5 19 0.5 0.7 0.9 1.2 1.61 2.1

20 0.5 0.7 0.9 1.2 1.51 2.0 FMIN Gap ZMIN=0.5

1.86

B-type 170

For wooden doors

Interaxis

45 mm

48 mm

52mm

Ø 35 Cup type

Cranking

Item number

52 6

9.5

Ø 35 Item number

248.0R10.050* 248.0P43.050* 248.0R11.050*

0mm

248.0L51.050*

248.0R12.050*

Drilling patterns for hinge cups > see page 1.8 * Available upon special request > see page 0.3

50 Pcs

Made of steel and zinc

Cranking

248.0S05.050*

0mm

With adjustable opening angle

50 Pcs

248.0S06.050*

Drilling patterns for hinge cups > see page 1.8 * Available upon special request > see page 0.3

Made of steel and zinc

Adjustable opening angle

Cranking

248.0160.050* 248.0161.050*

9mm

Drilling patterns for hinge cups > see page 1.8 * Available upon special request > see page 0.3

Made of steel and zinc

50 Pcs Mounting plates

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted

Steel mounting plates > see page 1.93

6.9

3.5

820.6308.050

Zinc diecast mounting plates > see page 1.93

1.87

5.5

135°-165°

10000 Pcs 6.9

3.5 15

Screw-on ready < screws

Machine insertion ready

• Opening angle 135°-165° • Drilling diameter for hinge cup 35mm • Drilling depth 12mm • Hinge on plate mounting system slide-on nable better accessibility into cabinet interior E due to the wider opening angle Opening angle can be easily adjusted by rotating the appropriate screw on hinge arm

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

· ·

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate thickness table For further explanation > see page 1.5

Mounting plate drilling distance

X 10 11 12 13 14 1 15 16 17 18 19 20

52 D 19

52 D

F>Fmin 37

F>Fmin

K K

3 6 5 4 3 2 1

1 0

4 6 5 4 3 1

2 1 0

5 6 5 4 1

3 2 1 0

37 90

1.4

7 6 1

5 4 3 2 1 0 D 61 61

D D

4 3 2 1 0

19 19

0˚

C C

19D

7.6

7.6 79

S S

37 37

67 67

prikazuje spono s podlogo RisbaRisba prikazuje spono s podlogo D=9D=9

Drawings show application on D=9mm thick mounting plate

V V

F>2Fmin F>2Fmin

Drawings show application on D=0mm thick mounting plate

File name: VG-SK-170-09-SO File name: VG-SK-170-09-SO

prikazuje spono s podlogo RisbaRisba prikazuje spono s podlogo D=18D=18

Drawings show application on D=18mm mounting plate.

Door clearance For further explanation > see page 1.5

S D

Risba prikazuje spono s podlogo D=18 Risba prikazuje spono s podlogo D=18

Risba prikazuje spono s podlogo D=18

Push latch > see page 1.109

3 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 K 4 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 File name: VG-SK-170-09-SO File name: VG-SK-170-09-SO 5 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0

File name: VG-SK-170-09-SO

Glissando CR > see page 1.125

Accessories

16 17 18 19 20 1 21 22 23 24 i Fm

D D

V V

79 79

Glissando TL 170 > see page 1.123

Risba prikazuje spono s podlogo D=9 Risba prikazuje spono s podlogo D=9

S S

Risba prikazuje spono s podlogo D=9

D D

7.6

70 70

F>2Fmin

Soft closing systems S 70 67

F>Fmin F>Fmin

Risba D prikazuje spono s podlogo D=0 Risba prikazuje spono s podlogo D=0

Drawings show C application on C prikazuje spono Risba s podlogo D=0 D=0mm thick mounting plate S 70

V 67

67 19 19

prikazuje spono s podlogo RisbaRisba prikazuje spono s podlogo D=0D=0

67 C

F>Fmin

61 D

x K

7.67.6

D D

37 37

37 67 V

F>2Fmin

61 61

C value with D=0 mounting plates x x F>Fmin F>Fmin K K K 3 4 5 6 7 C -9.0 -8.1 -7.1 -6.1 -5.2 9 90

67 V

F>2Fmin

19 19

67 67

Drawings show application on D=0mm thick mounting plate

6 6 5 1

67 67

V V

6 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 2.6 7 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 5.1 FMIN Gap ZMIN=0.5

1.88

B-type For Pie-cut Corner Cabinet

For wooden doors

Interaxis

45 mm

48 mm

Ø 35 Cup type

Corner cabinet

Item number

48 6

9.5

Ø 35 Item number

248.0T81.050* 248.0T80.050* 248.0U13.050* 248.0U14.050* Drilling patterns for hinge cups > see page 1.8

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Legend of hinge cup symbols

Steel mounting plates > see page 1.93 6.9

Zinc diecast mounting plates > see page 1.93

820.6308.050 10000 Pcs

6.9

3.5 15

1.89

3.5 15

Screw-on ready < screws

Machine insertion ready

• Drilling diameter for hinge cup • Drilling depth • Hinge on plate mounting system

35mm 11.5mm slide-on

· S tandard drilling for hinge and mounting plate · Hinge integrated adjustment

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed hinges

Side adjustment +3/-1mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Adjustments

Drilling details

V = 16 - 22 mm K = 3 - 5 mm

Any B-type mounting plate of thickness D=0 can be used. > see page 1.93

The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing.

-2 11.5 +3 -1 +5 -1.5

D=3

Accessories Cover caps for hinge arm > see page 3.111

1.90

B-type Flap Door Hinge

For wooden doors

Senso / fold

Verso / Maxi Swing

Duo standard, duo forte Maxi

Strato

Maxi up

11 C

Ø35

K C (mm) (mm) 3

4.5

5.5

6.5

7.5

Ø5

90° B

MOUNTING PLATE HEIGHT D

A B (mm) (mm)

Interaxis 1 11.5

2,5

3,5

4,5

5,5

24mm MIN 12 mm

8 mm-acjustment 2 mm MIN = 6 mm

Cup type

Cranking

0mm

200 Pcs

Hinge cup screws If not pre-mounted Steel mounting plates > see page 1.93

6.9

3.5 15

Zinc diecast mounting plates > see page 1.93

left

926.0A26.050*

right

926.0A27.050*

6.9

3.5 15

Legend of hinge cup symbols

820.6308.050 10000 Pcs

24 38

Item number

Made of steel

Mounting plates

1.91

Ø35

21.5

Screw-on ready < screws

• Opening angle 90° • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting mechanisms slide-on · T o be used with flap stay mechanisms · Mounted on the cabinet side · Standard drillings Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

Side adjustment +0.5/-0.5mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate thickness table For further explanation > see page 1.5

Ø5

D 0 1 2 3 B (mm) 20 21 22 23

Ø5

D=mounting plate height X=22.5 + K - A +/-2mm height adjustment

32 A

min 1

11.5 K

11.5

K Ø35 X

Ø35 X

Accessories

Door clearance For further explanation > see page 1.5 Cover caps for hinge arm > see page 1.111

V 16 17 18 19 20 1 21 22

i Fm

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

1.92

B-type Hinge Ø35 - shallow cup

For wooden doors

• Opening angle 90° • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting mechanisms slide-on

108°

Interaxis

45mm 9.5

Ø 35

Technical Details

Item number

Cup type

248.7330.050

Cranking

108 °

0mm 8.7

Mounting details

Mounting plate drilling distance

Mounting plate thickness table

14 3

4 4

Drawing show application on D=0mm thick mounting plate

Soft closing systems

0 2

D=15+K-x

Mounting plate is ﬁxed with 2 Euro screws

Accessories

Glissando CR 972-0X19

Legend of hinge cup symbols

Hinge cup screws If not pre-mounted 3.5 15

1.92A

6.9

Glissando CR 972-0X19

18 0

820-6308-050 10000 Pcs

Screw-on ready < screws

1.92B

Concealed hinges

B-type Mounting Plates

For B-type concealed hinges

Drilling pattern

Dimensions

Steel mounting plates

60.3

200 Pcs

Made of steel

Zinc diecast mounting plates

200 Pcs

Made of zinc

Fixing screws for mounting plates If not pre-mounted Euro screws Ø8

Ø8

Ø6.3

821.6304.050 L=11 821.6323.050 L=13 821.6332.050 L=15 10000 Pcs

1.93

Chipboard screws 4 4

7.5 7.5 16 16

820.6328.050 10000 Pcs

Height adjustment +/- 2mm

Item number

Ø5

Item number

Ø6.3

Ø5

Item number

Ø3

Item number

Ø10

Item number

Ø5

Item number

min 10.5

Ø4.5

Ø5

Item number

10.5

min 7.5

13 min 9

4.5

5.8

min 8

Mounting plate thickness (D)

Ø6.3

7.5

min 10.5

Ø6.3

min 11

Mounting plate type

Mounting plate thickness

Ø5

Item number

0 mm 244.0866.050* 244.0L29.050* 244.0963.050* 244.0965.050* 244.0929.050* 244.0L26.050* 244.0L50.050* 244.0H64.050* 244.0P24.050* 1 mm 244.0T40.050*

244.0307.050* 244.0K95.050*

244.0S65.050*

244.0S67.050*

2 mm 244.0T28.050*

244.0Z64.050* 244.0K96.050*

244.0S66.050* 244.0V64.050* 244.0S68.050*

3 mm 244.0867.050* 244.0L39.050* 244.0L66.050* 244.0G19.050* 244.0930.050* 244.0L98.050* 244.0L40.050* 244.0H65.050* 244.0P25.050*

* Available upon special request > see page 0.3

4 mm 244.0L37.650*

244.0K97.650*

244.0M28.650*

5 mm 244.0L38.650*

244.0K98.650* 244.0T14.650*

244.0M29.650*

6 mm 244.0232.650*

244.0914.650*

9 mm 244.0062.650*

244.0067.650* 244.0P41.650*

18 mm 244.0063.650*

244.0068.650* 244.0175.650*

* Available upon special request

244.0B12.650*

see page 0.3

Legend of mounting plate type symbols

11 Screw on ready for euro screws < screws

Screw-on ready for chipboard screws

Pre-mounted 11mm euro screws

13 Pre-mounted 13mm euro screws

15 Pre-mounted 15mm euro screws

7.5 Pre-mounted chipboard screws

Machine insertion ready

Premounted 7.5mm expanding dowels

10.5 Pre-mounted 10.5mm expanding dowels

1.94

Concealed hinges

B-type Mounting Plates

For B-type concealed hinges

Drilling pattern

Dimensions

Steel mounting plates · Back-to back application

60.3

200 Pcs

Made of steel

Zinc diecast mounting plates · For 18mm inset doors

200 Pcs

Made of zinc

Fixing screws for mounting plates If not pre-mounted

Ø8

Ø6.3

Euro screws

821.6304.050 L=11 821.6323.050 L=13 821.6332.050 L=15 10000 Pcs

1.95

4 4

7.5 7.5 16 16

Chipboard screws

820.6328.050 10000 Pcs

Concealed hinges

Height adjustment +/- 2mm

10.5

S 15

Mounting plate thickness (D)

Mounting plate type

Mounting plate thickness

Ø5 5.8

Item number

244.0V50.050*

3 mm

S>=1

Minimum panel thickness is 15mm. File name:3D-PODL-ZAMAKNJENA

3D-PODLOGA-ZAMAKNJENA

Datum:

Franc BANKO 16.01.2010

Telefon:

+386 5 6690 310

Fax: e-mail:

+398 5 6690 301 @

Izdelal:

Telefon:

d.d. DEKANI KOPER - SLOVENIJA

Slide on

Ime datoteke:

Fax:

RAZVOJNI ODDELEK-R&R

2 mm

244.0036.650*

1 od 1

Stran:

V=18

e-mail:

Fits standard 37mm drilling

Legend of mounting plate type symbols

10.5 Screw on ready for euro screws < screws

Pre-mounted 10.5mm expanding dowels

File name:PODLOGA-KRIZNA

PODLOGA-KRIZNA Telefon: Fax: e-mail:

Slide on

Datum:

Franc BANKO 16.01.2010

Telefon:

+386 5 6690 310

Fax: e-mail:

+398 5 6690 301 @

Izdelal:

Ime datoteke:

PREDLOG VGRADNJE za kupca :

za kupca

d.d. DEKANI KOPER - SLOVENIJA RAZVOJNI ODDELEK-R&R

Stran:

1 od 1

1.96

Hinge Ø40

For wooden doors

93º Interaxis

52mm 7.5

Ø 40 Cup type

Cranking

249.7301.050*

0mm

200 Pcs

Drilling patterns for hinge cups > see page 1.8

Made of steel 249.7302.050*

Cranking

10mm

200 Pcs Mounting plates > see page 1.101

Drilling patterns for hinge cups > see page 1.8

Made of steel Hinge cup screws If not pre-mounted

Soft closing systems

6.9

3.5

Legend of hinge cup symbols

820.6308.050

10000 Pcs Push latch > see page 1.109

1.97

Item number

Glissando CR > see page 1.125

6.9

3.5 15

Screw-on ready < screws

• Opening angle 93˚ • Drilling diameter for hinge cup 40mm • Drilling depth 14.5mm • Hinge on plate mounting system slide-on

Side adjustment +2/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

· F or door thickness up to 40mm · R eliable soft closing with Glissando CR

Mounting details D S

Mounting plate thickness table

60 37 K

60z 37

z F≥Fmin

3 8

5 6 K

7 8 9

F≥Fmin

18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

D+4 V

D+4

x 3

9 10 11 12 13 14 15 16 17 18 19 20 21 22

4 5

63 37 63 37

6 K

z min F≥2F

8 9

F≥2Fmin

V D+14 Door clearance (Fmin)

D+14

D D

3 4 5 S 6 7 S K 8 9 10 11 12 K

20 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4

21 0.6 0.6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

22 23 0.7 0.8 0.7 0.8 0.7 0.8 0.7 0.8 0.6 0.8 0.6 0.8 0.6 0.8 0.6 0.8 60 0.6 370.8 60 0.6 0.7 z 37

24 1.0 1.0 1.0 1.0 1.0 0.9 0.9 0.9 0.9 0.9

25 1.2 1.2 1.2 1.1 1.1 1.1 1.1 1.1 1.1 1.0

26 1.4 1.4 1.3 1.3 1.3 1.3 1.3 1.2 1.2 1.2

27 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4

28 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4

29 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8

30 2.3 2.3 2.2 2.2 2.2 2.1 2.1 2.1 2.0 2.0

31 2.3 2.3 2.2 2.2 2.2 2.1 2.1 2.1 2.0 2.0

32 2.6 3.5 2.5 2.4 2.4 2.4 2.4 2.3 2.3 2.3

33 2.8 2.8 2.8 2.7 2.7 2.6 2.6 2.6 2.5 2.5

34 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.8

35 6.1 5.3 4.7 4.1 3.6 3.5 3.5 3.4 3.4 3.3

38 40 9.0 10.9 8.2 10.2 7.5 9.4 6.8 8.7 6.2 8.0 5.6 7.4 5.1 6.8 4.6 6.3 4.1 5.8 4.1 5.4

Fmin

Z 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4

z X

1.98

Hinge Ø40

For wooden doors

93º Interaxis

52mm 7.5

Ø 40 Cup type

Cranking

249.7303.050*

18mm

200 Pcs

Drilling patterns for hinge cups > see page 1.8

Made of steel

Cranking

249.7304.650*

22mm

200 Pcs

Drilling patterns for hinge cups > see page 1.8

Made of steel Hinge cup screws If not pre-mounted

Mounting plates > see page 1.101

6.9

3.5

Legend of hinge cup symbols

820.6308.050

10000 Pcs 6.9

3.5 15

1.99

Item number

Screw-on ready < screws

V D+4

• Opening angle • Drilling diameter for hinge cup • Drilling depth • Hinge on plate mounting system S

· For door thickness up to 40mm

Side adjustment +2/-1mm

63 37

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed hinges

93 ˚ 40mm 14.5mm slide-on

60 37 F≥2Fmin z

F≥Fmin

V X D+14

V D+4 Mounting details

Mounting plate thickness table

60 37 z

63 37

9 10 11

D+22V S

10 11 12 13 14 15 16

D+14 S

60 37

-2 -1

60 37

X X

F≥2Fmin

0 3 8

S K

D+26

4 7

5 8

9 10 11

60 37 V

X V

3 6

10 11 12

D+26

X Door clearance Fmin

V D+22

20 0.4

21 0.6

22 0.7

23 0.8

24 1.0

25 1.2

26 1.4

27 1.6

28 1.6

29 2.0

30 2.3

31 2.3

32 2.6

33 2.8

34 3.2

35 38 40 6.1 9.0 10.9

Z 0.4

0.4

0.6

0.7

0.8

1.0

1.2

1.4

1.6

2.0

2.3

3.5

2.8

3.1

5.3 8.2 10.2

0.4

0.5

0.7

0.8

1.0

1.2

1.3

1.5

2.0

2.2

2.5

2.8

3.1

4.7 7.5

9.4

0.4

0.5

0.7

0.8

1.0

1.1

1.3

1.5

2.0

2.2

2.4

2.7

3.0

4.1 6.8

8.7

0.4

0.5

0.6

0.8

1.0

1.1

1.3

1.5

1.9

2.2

2.4

2.7

3.0

3.6 6.2

8.0

0.4

0.5

0.6

0.8

0.9

1.1

1.3

1.5

1.9

2.1

2.4

2.6

2.9

3.5 5.6

7.4

0.4

0.5

0.6

0.8

0.9

1.1

1.3

1.4

1.9

2.1

2.4

2.6

2.9

3.5 5.1

6.8

0.4

0.5

0.6

0.8

0.9

1.1

1.2

1.4

1.8

2.1

2.3

2.6

2.8

3.4 4.6

6.3

0.4

0.5

0.6

0.8

0.9

1.1

1.2

1.4

1.8

2.0

2.3

2.5

2.8

3.4 4.1

5.8

0.4

0.5

0.6

0.7

0.9

1.0

1.2

1.4

1.8

2.0

2.3

2.5

2.8

3.3 4.1

5.4

Fmin

0.4

1.100

Mounting Plates For Hinge Ø40

Slide-on hinge to plate attachment

Drilling pattern

Steel mounting plates

Fixing screws for mounting plates If not pre-mounted

Euro screws Ø8

Ø8

Ø6.3

821.6323.050 L=13 821.6332.050 L=15

10000 Pcs

1.101

Chipboard screws 4 4

7.5 7.5 16 16

820.6328.050 10000 Pcs

Concealed hinges

Height adjustment +/- 2mm

Mounting plate thickness Mounting plate type

Mounting plate thickness (D)

min 11

Ø6.3

Item number

4 mm

244.7324.050*

244.7314.050*

5 mm

244.7325.050*

244.7315.050*

6 mm

244.7326.050*

244.7316.050*

8 mm

244.7328.050*

244.7318.050*

3.9

Ø5

Item number

Legend of mounting plate type symbols

14 Screw-on ready for chipboard screws

Pre-mounted 14mm euro screws

1.102

Wide Angle Hinge

For wooden doors

270Â°

Cup type

Nickel plated

With spring

Without spring

Item number

241.0043.650*

241.0074.650*

241.0050.650*

100 Pcs

Made of zinc D=0mm

Mounting plate Nickel plated

244.0907.650* 13

244.0848.650* 244.0D99.650*

D=2mm

244.0E02.650* 244.0D47.650*

D=6mm

244.0D46.650*

This mounting plate can be used only with Wide angle hinge.

500 Pcs

Made of zinc

Hinge cup screws If not pre-mounted

Legend of hinge cup symbols

13 6.9 3.5

6.9 15

1.103

3.5 15

820.6308.050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Pre-mounted 13mm euro screws

Side adjustment +3/-0mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

For further explanation > see pages 1.12 - 1.14

With spring Mounting details

Without spring

Drilling details

S 6.5

6.5

3552

7 18

3552

11.5

V 11.5

Drawings18show 18 application on D=0 mounting plate and S D S=18Sside D panel. S

11.5

11.5 6.5

6.5

6.5 30

V PV min.F = 0.5 V

P P 7 min.F = 0.5min.F 18 = 0.5

7 18 7 18

7 V

3552

18.5

3552 7

3552

18.5 7

18.5

Drawings show application on D=6mm thick mounting plate

5 6 1

2 0

6 6 1

7 6 1

2 1 2

8 6 9 1

10 1

11 1

4 6 2 1 0

3552

0 2 0 1 2 0 2 2 0 3 2 1

6.5

7 18

3552

V V

P V min.F = 0.5

S 16 17 18 19 20 1 21 22 23 24

6.5 S

Mounting plate thickness table

1 6 D

Mounting plate drilling distance

Door thickness For correct opening, the door thickness should not exceed (Vmax) 21mm

1.104

Concealed hinges

• Opening angle 270° • Drilling diameter for hinge cup 35mm • Drilling depth 12.5mm • Hinge on plate mounting system key-hole

Hinge for Cabinet with Refrigerator

For wooden doors

110° Interaxis

Interaxis

45mm

48mm 48

Ø 35 Cup type

Cranking

Item number

248.0R09.050*

0mm

9.5

Ø 35 Item number

248.0K10.050* 248.0M41.050*

Drilling patterns for hinge cups > see page 1.8

200 Pcs

Cup made of steel, arm made of zinc

Steel mounting plates

244.0655.050*

D=0mm

244.0846.050*

Information about mounting plate symbols > see page 1.94

500 Pcs

Made of steel Legend of hinge cup symbols

Mounting plates This hinge can be mounted on all Miniprimat mounting plates

Screw-on ready < screws

Hinge cup screws If not pre-mounted 6.9

6.9

3.5 15

1.105

820.6308.050 3.5

10000 Pcs

Machine insertion ready

Pre-mounted 13mm euro screws

• Opening angle 110° • Drilling diameter for hinge cup 35mm • Drilling depth 11.5mm • Hinge on plate mounting system key-hole

Side adjustment +3/-0mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

For further explanation > see pages 1.12 - 1.14

Mounting details

Mounting plate drilling distance

min 12

D=0

min 15

F>Fmin

min 17

x 7

53.5

L=37

Drawings show application on D=0mm thick mounting plate

37/28

Door clearance For further explanation > see page 1.5

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap Z=0

1.106

Concealed hinges

Flat hinge arm allows minimal required gap between refrigerator and cabinet side.

Width (mm)

Material

Butt Hinge 1mm thick

Length (mm)

General Hinges

Finish

Steel

Zinc plated

610.8H40.401.500

Steel

Zinc plated

610.8H40.401.550

Item Number

1 Pce Butt Hinge 1.6mm thick

1 Pce

1.107

Piano Hinge Coil

Length (m)

General Hinges

Finish

Item Number

Electro Brass

610.8H40.404.000

Nickel Plated

610.8H40.404.100

Antique Brass

610.8H40.405.500

Chrome Plated

610.8H40.407.960

1 Pce Furniture Hinge with Solid Pin

1 Pair Bomber Hinge, 100mm Light Duty Double Action

1 Pair

1.108

Push Latch

For wooden doors and drawers

push

Bronze

push

Item number

Push latch

915.0X59

381

Cross m. plate

915.4183

381

Linear m. plate

915.4175

381

915.0X59.381.K1*

+ 200 Sets Push latch

915.0X59.381.K2*

+ 200 Sets *Available upon request > see page 0.3

Cross mounting plate

Linear mounting plate

Made of steel and plastic

200 Pcs

Fixing screws for mounting plates

Euro screws 821.323.50

Ø 6.3

Ø8

10000 Pcs

13 7.5 7.5

4 12

1.109

Chipboard screws

Works with standard concealed hinges and drawers Effortless opening with just a light touch Depth adjustment ensures reliable closing and consistent performance in cases of inaccurate drilling ‘Safety click’ feature for easy detachment of the mechanism from the mounting plate

Hinge Accessories

· · · ·

Drilling pattern

Dimensions

Minimum gap Minimum gap required required

32 22 37 Ø6

Depth adjustment +4.5 / -1mm

16.5

Ø5

Ø6

Positioning

Close to the ‘touch opening point’ on the side opposite to hinges

On the cabinet side; gap between drawer and cabinet side = min 12mm

On the drawer bottom; in the middle of drawer

Push latch works with standard hinges. Push latch works on drawer; the gap between the drawer and the cabinet side = min. 12 mm

1.110

Cover Caps

For hinge arms Titus recommends!

Technical details

For hinge arm with Glissando

Plate type

Material/ surface

Item number

Nickel plated

To improve appearance Titus recommends the use of hinge arm cover plates with all compatible concealed hinges.

Titus

steel

248.1646 >

050

neutral

steel

248.1712 >

050

Information about mounting plate symbols > see page 1.94

4000 Pcs

1.111

Made of steel

Concealed hinges

Glissando Soft Closing Systems

1.112

Glissando Damping Product Guide

Page

Glissando for Concealed Hinges Add-on hinge soft closing solution Glissando TL Glissando TL 170

Stand-alone door soft closing solution Glissando CR

1.113

1.121 · effortless silent and safe door closing · fits the hinge’s standard drilling patterns · easy retrofit installation · adjustable to different door sizes and weights · perfect door motion · doesn’t occupy additional space inside the cabinet

1.125 · effortless silent and safe door closing · easy retrofit installation · adjustable to different door sizes and weights · perfect door motion

Concealed hinges

Titusoft for Drawers Stand-alone drawer soft closing solution Titusoft for wooden drawers Titusoft for metal drawers

1.127 路 effortless silent and safe door closing 路 self closing and soft closing in single mechanism 路 safe drawer closing 路 easy retrofit installation

1.114

Glissando Soft Closing Range

How to Choose the Right Glissando? Glissando TL Glissando TL 170 Glissando CR

Titus Glissando soft closing system is available for the whole range of hinge applications. The user can choose between add-on hinge or stand-alone solutions.

Add-on hinge soft closing solutions

Stand-alone door soft closing solution

Glissando TL

Glissando CR

Concealed hinges Glissando TL 170

T-type 110

T-type 110/45°

T-type 110/90°

T-type 120

T-type 170

S-type plus 110

S-type 110

S-type 110/15°

S-type 110/24°

S-type 110/30°

S-type 110/45°

S-type 110/90°

S-type 170 B-type 110

B-type 110/30°

B-type 110/45°

B-type 110/90°

B-type 170 Hinge Ø40

1.115

X X

Glissando Soft Closing

Glissando Application

Glissando TL ‘one for all’ T-type

· One item fits multiple applications · Same item can be used on all crankings and angled hinges · Adjustable damping enables perfect functioning on every door

· Designed to fit the concealed hinge cup · Toolless mounting · Suitable for different types of cabinets for kitchens, living rooms, bathrooms and other furniture

T-type 110 0mm

T-type 110 5mm

T-type 110 9mm

T-type 110 17mm

T-type 110/45° 17mm

T-type 110/90° 17mm

1.116

Glissando for Concealed Hinges Information

Item number

Titus Glissando soft closing devices972.0X19. can not be >used350 with 380 free-swinging door hinges.

Beig

Grey

Whit

Technical details

330

*Fixing screw included in a set

How Many Glissandos per Door? Add-on hinge soft closing

Made of plastic solution

Glissando TL Glissando TL170

Mounting details

Mount Glissando on the bottom hinge in case of 2 hinges on the door or on the middle hinge in case of 3 hinges on the door.

Fixing Glissando

250

200

150

100

Recommended number per door and positioning

Glissando CR on of the cabinet.

Stand-alone soft closing solution Glissando CR

Recommended number per door and positioning Mount a CR on the hinged side of the cabinet on the top or bottom.

Glissando CR Glissando

No. of hinges

3+ 3 2

Tool-less adjustment Turn towards “+” to increase or towards “-” to decrease the damping force.

ormation please contact our representative. om

1.117

1-2

Recommended number per door and positioning

The functioning of Glissando CR depends on the hinge’s closing force. A trial mounting is always recommended.

Glissando Soft Closing

How to Mount Glissando? Toolless mounting Glissando TL Glissando TL 170

Simple toolless assembly: Insert Glissando into the holes on the hinge and press down with hand.

The Toolless ‘snap on’ version for reduced assembly time and flexibility of application. Glissando TL can be mounted at any time after furniture assembly so can be offered as a retro fit option by the installer.

Screw-on into the cabinet corner Glissando CR

Glissando CR is mounted into the cabinet corner by using chipboard screws 20mm long. Glissando dampers’ discreet design enhances the look of the door and occupies minimal space in the cabinet interior.

1.118

Glissando for Concealed Hinges Information

Adjustment of the Damping Add-on hinge soft closing solution Glissando TL Glissando TL 170

Glissando features quarter turn adjustment to provide optimal closing speed for any door dimensions and weight.

The damping function can be adjusted to fit different door weights which enables · perfect door functioning · use of the same type of Glissando for various doors

Adjustable damping zone

Stand-alone soft closing solution Glissando CR

1.119

Turn towards '+' to increase or towards '-' to decrease the damping.

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Damping force

Flat characteristic of the curve illustrates the damping force during the soft closing action at defined speed.

Glissando Soft Closing

Flat characteristic of the curve illustrates the damping force during the soft closing action at defined speed.

Flat characteristic of the damping force du action at defined spe

Stroke Stroke

Stroke

Titus Hydraulic Damper Efficient modular design

Glissando damper Industry average Glissando damper Industry average

· Low number of assembly parts enables quick development of customised solutions 18% · Engineered for efficient and high 7% precision manufacturing Nominal value · Wide range of applications

Glissando damper Industry average

-7% -18%

Deviation from nominal force Deviation from nominal force

Wide operating scope

Deviation from nominal force

Damping force

F · High coefficient γ = H γ of Titus damper FL assures efficient damping at any closing speed FH -damping force at slam speed (12 mm/s) FH FL can be easily adapted · Damping force FL -damping to customer needsforce at slow speed (1 mm/s)

FH FL FH

FH - damping force at slam speed (12 mm/s)

FH FL - damping force at slow speed (1 mm/s) FL FStroke H – damping force at slam speed (12mm/s) FL – damping force at slow speed (1mm/s)

FH - damping force at s

FL - damping force at s

γ=

Industry range

Stroke Automated control of Glissando components Glissando

Industry range

Reliable damping and closing at any speed

Precision γ= γ damper filling

Higher coefficient means reliable damping at high speed and ensures that the system will reach its final position even at very slow speed.γ means reliable Higher coe cient

7 6

damping at high speed and ensures that the system will reach its final position even at very slow speed.

100% inspection of force and stroke

Components manufacture

Sealing

Higher coefficient γ means reliable damping at high speed and ensures that the system will reach its final position even at very slow speed

Scrap rejectionIndustry range

Automated control of components Stroke

Lama damper 100%

Higher coe cient

inspection damping of at high spe the system will reach force and stroke at very slow speed.

γ 7 3

Industry range

Titus damper

Damping force

Flat characteristic of the damping force du action at defined spe Flat characteristic of the curve illustrates the damping force during the soft closing action at defined speed.

Stroke

1.120

Glissando TL Add-on Hinge Soft Closing Solution

For 110° hinges

110° Interaxis

Interaxis

45mm

48mm 48

For the following cup types

Glissando TL ‘snap-on’ · T-type 110

Damping force

Technical details

Hinge opening angle

Ø 35

Item number

729.0K71.054

110°

9.5

200 Pcs

Made of steel and plastic

66.2

67.6

Glissando TL ‘snap-on’ · S-type plus 110 · S-type 110 · B-type 110

110°

45N

951.0X94.050

110°

35N

951.0P59.050

110°

60N

951.0P63.050

43.5

Made of steel and plastic Legend of hinge cup symbols

Screw-on ready

1.121

Machine insertion ready

Premounted euro screws

Pre-mounted Easy-fix chipboard system screws

Pre-mounted expando dowels

Adjustable damping zone

Glissando Soft Closing

· Same item can be used on all crankings and angled hinges · Designed to fit the concealed hinge cup and requires no extra space inside the cabinet · Adjustable damping · Tooless mounting

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Mounting details Toolless assembly

Insert Glissando TL into the holes on the hinge

Press down

Glissando

250

200

150

100 50

2 2

No additional drilling is required

Recommended number per door and positioning

1.122

Glissando TL 170 Add-on Hinge Soft Closing Solution

For the following cup types

Technical details

Item number

110° 951.0F15.650

Glissando TL 170 ‘snap-on’

Hinge opening angle

For T-type 170, S-type 170 and B-type 170

88.5

Box content 100 pcs soft closing mechanisms 100 pcs striking plates

Soft closing mechanism

12.4

52.5

Striking plate

Made of steel and plastic Legend of hinge cup symbols

Screw-on ready

1.123

Machine insertion ready

Premounted euro screws

Pre-mounted Easy-fix chipboard system screws

Pre-mounted expando dowels

· Gentle and reliable soft closing on doors with wider opening angle · Fits perfectly 45/9.5mm, 48/6mm and 52/5.5mm hinge cups · Furniture consumers’ preferred ‘ConfidentClose’ · Tool free mounting

Glissando Soft Closing

Damping adjustment

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Mounting details Toolless mounting

Insert Glissando TL 170 into the holes on the hinge cup

Press down

Place the striking plate into the hole on the hinge arm

Press down

Glissando

250

200

150

100 50

2 2

Recommended number per door and positioning

1.124

Glissando CR Stand-alone Door Soft Closing System

Beige

972.0X19 >

Grey

110Â° 0mm

Item number

White

Glissando CR for full overlay hinges

Cranking

Technical details

Hinge opening angle

For full overlay and half overlay concealed hinges

350

380

360

*Fixing screw included in a set Nominal 11 (Adjustment: Nominal + 5mm)

100 Pcs Glissando CR for half overlay hinges

1.125

Made of plastic

110Â° 9mm Nominal 10 (Adjustment: Nominal + 5mm)

972.0X34 >

380

· Intuitive ‘place and fix’ installation in the comer of the cabinet · Tool-less damping adjustment · One item for a wide range of doors · Reliable performance

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Mounting details Glissando CR

Glissando CR 35

Nominal 11 (Adjustment:16 Nominal + 5mm) 16

75 18 °

25 25

Nominal 11 (Adjustment: Nominal + 5mm)

Mount Glissando CR on the hinged side of the cabinet

One screw fixing

Glissando CR9 44 Further explanations > go to

Glissando CR9 44

Nominal 10 (Adjustment: Nominal + 5mm)

75 °

16,5

Nominal 10 (Adjustment: Nominal + 5mm)

http://www.youtube.com/watch?v=8-uWs_z2d0s

16,5

Mount Glissando CR on the hinged side of the cabinet

Further explanations > go to

One screw fixing

http://www.youtube.com/watch?v=8-uWs_z2d0s

The functioning of Glissando CR depends of the hinge’s closing force. A trial mounting is always recommended.

No. of hinges

Glissando

3+ 3 2

1-2

Recommended number per door and positioning

1.126

Glissando Soft Closing

Damping adjustment

Titusoft WD Soft Closing System for Wooden Drawers

Technical details

Grey

For wooden drawer with roller runners

Item number

Titusoft WD

973.0X35

Set consists of: Titusoft mechanism Activator

40.5

Titusoft mechanism

6.5

192 Ø 6.5

Ø 3.2

Ø3

192

214

6.5

Ø3

5 3. Ø

Ø 6.5

Ø3

Ø 3.2 6,5

40.5

192

78 18

214

Ø3 .7 10

Activator

6,5

.7 Ø3

3. 5

78 18

1 Set

1.127

Made of plastic

Ø3

192

380

Capacity chart (kg)

(mm)

Mount 1 or 2 Titusoft mechanisms depending on drawer weight and width

Mounting details

2. 2b

Position the Titusoft mechanism on the top of the drawer slide

Fix with 2 screws L=20mm

4. 4a

3a 4b

1. Rest the activator against the drawer front 2. Align the vertical position of the activator with the top of the Titusoft mechanism and mark the screw locations

Fix with 2 screws L=12mm

A trial mounting is always recommended. Please contact Titus Tekform for further technical assistance.

1.128

Glissando Soft Closing

· Works with most roller runner drawer slides · Easy, intuitive mounting · Smooth soft closing action independent of drawer hardware · Optimal closing speed · Non handed design

Titusoft MD Soft Closing System for Metal Box Drawers

Grey

For metal boxes

Item number

973.0X39

Titusoft MD

380

Set consists of: Titusoft mechanism Activator Mounting jig

Titusoft mechanism

Activator

1 Set

Mounting jig

Made of plastic

Technical details Retrofit mounting

3.2

42.4

40.5

Ø4

213

40.5

42.4

Ø4

225

192

1.129

213

Ø4

225

3 Capacity chart (kg)

路 'One-for-all' soft closing for single skin metal boxes 路 Allows for easy factory mounting or retrofit application 路 Intuitive positioning 路 Preserve the life-time of the drawer

Glissando Soft Closing

(mm)

Mount 1 or 2 Titusoft mechanisms depending on drawer weight and width

3 1

Mounting details 2 1

Retrofit mounting

1 2.

3 3.

5 4.

3 5 1

L 2

For retrofit mounting

Factory mounting

For factory mounting

97.5

5 8.8

103.5

Marked line

130

13.5

Marked line

18.5

192

5 9

A trial mounting is always recommended. Please contact Titus Tekform for further technical assistance.

1.130

Tekform Drawer

Drawers & Runners

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.2

2.09A

Tekform Drawer - Slimline Product Guide

Page

Tekform Drawer - Slimline Tekform Slimline drawer DW70

Tekform Slimline drawer DW100

Tekform Slimline drawer DW145

Tekform Slimline drawer DW182

2.09B

2nd Generation of Double Wall Drawers

Sleek look · Narrow sides · Efficient utilization of drawer space

2.09C

‘EasyFix’ front panel connector · Hand insertion · Quarter turn lock · Repeatable assembly and disassembly possible

User friendly mounting · Intuitive installation instructions · Easy assembly and disassembly of the drawer

Tekform Drawer - Slimline

Tekform Slimline Drawer

Flexibility of runner system · Same panel cutting dimensions as 1st generation Tekform drawer · Same drilling specification as 1st generation Tekform drawer

Superior vertical and horizontal stability of rails · Smooth and silent operating · Reliable drawer opening and closing · Improved drawer stability in open position

Titus damper inside · Life-long consistent performance at various closing speeds · ‘Confident Close’

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.09D

Tekform Slimline Drawer Information

Technical Guide How to choose the appropriate drawer dimension?

Select the drawer size based on available cabinet space. Please refer to the below chart with indicated minimum space

required in cabinet to choose appropriate drawer system.

Tekform drawer nominal length (NL) in mm NL

270

300

350

400

450

500

550

Tekform drawer Min. height H required

Cabinet depth D

Tekform Slimline drawer DW70

115mm

NL+min 3mm

Tekform Slimline drawer DW100

147mm

NL+min 3mm

Tekform Slimline drawer DW145

198mm

NL+min 3mm

Tekform Slimline drawer DW182

230mm

NL+min 3mm

How to fix drawer sides to the front panel?

The Tekform drawer is available with ‘EasyFix’ or screw-in front connectors ø8 +/-0.1x11

EasyFix’ front connector

min. 48

Front connector

· hand insertion · quarter turn locking system · expandable plastic dowel · easy assembly and disassembly of front panel 9

90º

20 110

32 min. min. 49 33

Front connector

Screw-in front connector

· reliable connection · fixing with Ø 3.5x15mm screw (screws are not included) 32 min. 48

15.5

2.09E

5 3 1

Bottom panel and back panel cutting dimensions

Dimensions of bottom and back panel depends on:

· cabinet width · nominal drawer length · drawer height

Tekform drawer nominal length (NL) in mm NL

270

300

350

400

450

500

Decorative cover

Front connector

B Back panel

A Bottom panel

Cabinet width

550

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

Decorative cover Front connector ICW ECW

Back panel cutting dimension

Back panel height depends on the B selected drawer height

SDW70

SDW100

100

SDW145

151

ICW - 87 +/-0.5

H back panel

A B

B SDW182 183 Back panel

A Bottom panel

Bottom panel cutting dimensions

Back panel

A Bottom panel

L ICW - 87 +/-0.5

ICW - 87 +/-0.5

ICW+/-0.5 - 75 +/-0.5

ICW - 75

ICW ECW L

ICW - 75

ICW ECW NL

Tekform Drawer - Slimline

+/-0.5

270

300

350

400

450

500

550

260

290

340

390

440

490

540

NL= Tekform drawer nominal length (in mm) 15.5

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.09F 32

Tekform Drawer Slimline Information

Technical Guide How to choose the appropriate drawer runner fixing positions?

Drawer fixing positions depend on the choosen drawer front type.

Tekform slimline drawer with standard front

When a standard drawer front is applied, use the third hole on the drawer runner to fix it.

Tekform slimline drawer with inner front

When an inner drawer front is applied, use the second hole on the drawer runner for fixing.

front side

Decorative cover 192

192

Load capacity

Drawer load capacity is 40 kg.

192

40kg

B Back panel

A Bottom panel

Expanded tolerances

Tekform drawer provides expanded tolerances in cabinet construction and assures: 路 precise drawer alignment 路 smooth and silent operating 路 Improved drawer stability in open position 路 Tekform drawer provides tolerance of +/-1mm on bottom panel width size ICW ECW

2.09G

192

ICW - 87 +/-0.5

224

224 ICW - 75

+/-0.5

bottom panel width tolerance +/- 1mm

Front connector

Tekform Drawer - Slimline

Adjustment needs to be done on both sides of the drawer

Adjustments Side adjusment

Side adjustment is done through the adjustment screw on the drawer side.

+/- 1mm

Height adjustment

Height adjustment is done through the cam. First, release the locking screw and tighten it back after the front is adjusted.

+/- 2mm

Release

Adjust

Tighten

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.09H

Key Design Choices 'ConfidentClose'

Fast closing

Late start of damping

Quiet landing

Titus hydraulic damper

Titus hydraulic damper, designed and produced in-house · Reliable and consistent life-long damping · Smooth closing · Damper's consistency over high volume production runs assured · 100% automated quality check

Damping action

Even and smooth soft closing action · Soft and reliable closing

Damping force

Stroke Flat damping curve shows the uniform action produced during damper closing at a defined speed.

2.09I

Tekform Drawer - Slimline Download supporting documentation from the Titus Tekform website titustekform.com.au

2.09J

with Screw-in front connector

Item number for a set

Anthracite grey

270

655.8T27

655.8E27

150

185*

300

655.8T30

655.8E30

150

185*

350

655.8T35

655.8E35

150

185*

400

655.8T40

655.8E40

150

185*

450

655.8T45

655.8E45

150

185*

500

655.8T50

655.8E50

150

185*

550

655.8T55

655.8E55

150

185*

Nominal length

with EasyFix front connector

White

Tekform Drawer Slimline DW70

(mm)

Decorative cover Rear connector

Front connector

Drawer side Drawer runner

Cutting dimensions details

One set consists of

B Back panel

A Bottom panel

ICW ECW

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer A B A

L ICW - 87

+/-0.5

ICW - 87 +/-0.5 ICW - 75 +/-0.5

2 pcs Mounting instructions

L=NL-10 ICW - 75 +/-0.5

For further explanation > see page 9

4 sets Screws are not included *Which front connector is included depends on the ordered item number

2.09K

1 pc

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

full extention 40 kg 115mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 2.09H

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

min. 115

Chipboard screw Ø3.5 x 15 Euroscrew Ø6.3 x 13

NL+3

min. 115

NL+3

192 192

Drilling dimensions for the front panel NL+3

NL=270 mm

Screw-in attachment

EasyFix attachment

ø8 +/-0.1x11

ø8

min. 48

x11

min. 48

+/-0.1

32 ø8

min. 48

ø8 +/-0.1x11

x11

+/-0.1

min. NL=300 mm

min. 48

192 192

min. 48

192 192

NL=350 mm

20dimensions for the back panel Mounting 110

32 9

min. min. 49 33

20 110

min. min. 49 33

192 192

110

NL=400 mm

min. min. 49 33

192 192

NL=450 mm

Installation dimensions for the front panel 32

224 224

min. 48 32 15.5

NL=500 mm

min. 48

224 224 15.5

15.5

min. 48

NL=550 mm

15.5

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.09L

Tekform Drawer - Slimline

· · · · ·

Tekform Drawer Slimline DW100

with Screw-in front connector

Item number for a set

270

655.8U27

655.8F27

150 185*

300

655.8U30

655.8F30

150 185*

350

655.8U35

655.8F35

150 185*

400

655.8U40

655.8F40

150 185*

450

655.8U45

655.8F45

150 185*

500

655.8U50

655.8F50

150 185*

550

655.8U55

655.8F55

150 185*

Decorative cover Rear connector

Front connector

Drawer side Drawer runner

Anthracite grey

(mm)

White

Nominal length

with EasyFix front connector

Cutting dimensions details

B Back panel

A Bottom panel

One set consists of

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ICW ECW

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

A B

A L

ICW - 87B+/-0.5

100 100

L ICW - 87 +/-0.5 ICW - 75 +/-0.5 ICW - 75

+/-0.5

L=NL-10

2 pcs Mounting instructions

For further explanation > see page 9

4 sets Screws are not included *Which front connector is included depends on the ordered item number

2.09M

1 pc

Drawer runner type Load capacity Minimum height per drawer required Wooden back panel thickness Wooden bottom panel thickness

full extention 40 kg 147mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 2.09H

Installation dimensions

Drawer runner fixing positions

min. 147

Minimum space required for the cabinet

min. 147

Chipboard screw Ø3.5 x 15

37 37

Euroscrew Ø6.3 x 13

NL+3

min. 147 min. 147

NL+3

NL+3 192 192

NL+3

NL=270 mm

Drilling dimensions for the front panel NL+3

EasyFix attachment

Screw-in attachment

ø8 +/-0.1x11

min. 48

ø8

min. 32 48 min. 48

x11 32

+/-0.1

min. 48

32 32

ø8 +/-0.1x11

min. 48

ø8 +/-0.1x11

min. 48

32 32

192 192

NL=300 mm 32

32 min. 48

min. 48

min. 32 48 min. 48

192 192

NL=350 mm

9 17 dimensions for the back panel Mounting 32

17 32 142 32 17 142

9 min. min. 49 33

32 32

142

192 192

32 min. min. 49 33 min. min. 49 33

142

min. min. 49 33

NL=400 mm

17 32

192 192

32 min. min. 49 33

NL=450 mm 224 224

Installation dimensions for the front panel

NL=500 mm

32 32

224 224

min. 48

32 32

32 15.5 min. 48 min. 48

NL=550 mm

15.5

min. 48

Download supporting documentation from the Titus Tekform website titustekform.com.au 15.5

15.5

2.09N

Tekform Drawer - Slimline

· · · · ·

with Screw-in front connector

Item number for a set

Anthracite grey

270

655.8V27

655.8G27

150

185*

300

655.8V30

655.8G30

150

185*

350

655.8V35

655.8G35

150

185*

400

655.8V40

655.8G40

150

185*

450

655.8V45

655.8G45

150

185*

500

655.8V50

655.8G50

150

185*

550

655.8V55

655.8G55

150

185*

Nominal length

with EasyFix front connector

White

Tekform Drawer Slimline DW145

(mm)

Decorative cover Front connector

Rear connector

Drawer side

Drawer runner

One set consists of Cutting dimensions details

A Bottom panel

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

B Back panel

ICW ECW ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

A A

151

L L

151

ICW - 87 +/-0.5 ICW - 87 +/-0.5

2 pcs ICW - 75

+/-0.5

ICW - 75 +/-0.5

L=NL-10

Mounting instructions

For further explanation > see page 9

4 sets Screws are not included *Which front connector is included depends on the ordered item number

2.09O

1 pc

Drawer runner type Load capacity Minimum height per drawer required Wooden back panel thickness Wooden bottom panel thickness

full extention 40 kg 198mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 2.09H

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 37

Chipboard screw Ø3.5 x 15

Euroscrew Ø6.3 x 13

min. 198

37 37

NL+3

min. min.198 198

192 192

NL+3

NL+3dimensions for the front panel Drilling EasyFix attachment

Screw-in attachment 32

NL+3 NL+3

ø8 +/-0.1x11

min. 48

32 32 64 64

32 min. 48

32 32

min. 48

min. min. 48 48

32 32 64 64

32 32

32 NL=300 mm

min. 48

ø8 +/-0.1 x11 ø8 +/-0.1x11

192 192

ø8 +/-0.1x11

NL=270 mm

ø8 +/-0.1x11

min. 48

192 192

NL=350 mm

Mounting dimensions for the back panel

192 192

193

9 32 32

32 32

9 9

32 32

min. min.49 33

32 32 193 193 32 32

NL=400 mm

192 192

32 min. 49 min.min. min. 33 49 33

193

32 32

32 Installation dimensions for the front panel min. min.49 33

NL=450 mm min. min.49 33

224 224

NL=500 mm 32 32 64 64 32 32 min. min. 48 48 15.5

15.5 15.5

224 224

32 min. 48

NL=550 mm 32

Download supporting documentation from the Titus Tekform website titustekform.com.au 32

min.

min. 48

2.09P

Tekform Drawer - Slimline

· · · · ·

with Screw-in front connector

Item number for a set

Anthracite grey

270

655.8Z27

655.8H27

150

185*

300

655.8Z30

655.8H30

150

185*

350

655.8Z35

655.8H35

150

185*

400

655.8Z40

655.8H40

150

185*

450

655.8Z45

655.8H45

150

185*

500

655.8Z50

655.8H50

150

185*

550

655.8Z55

655.8H55

150

185*

Nominal length

with EasyFix front connector

White

Tekform Drawer Slimline DW182

(mm)

Decorative cover Front connector

Rear connector

Drawer side

Drawer runner

One set consists of

Cutting dimensions details

A Bottom panel

B Back panel

ICW ECW

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

A A

B L

183

L ICW - 87 +/-0.5

2 pcs

ICW - 87 +/-0.5 ICW - 75 +/-0.5 ICW - 75

+/-0.5

L=NL-10

Mounting instructions

For further explanation > see page 9

4 sets Screws are not included *Which front connector is included depends on the ordered item number

2.09Q

1 pc

Drawer runner type Load capacity Minimum height per drawer required Wooden back panel thickness Wooden bottom panel thickness

full extention 40kg 230mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 2.09H

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

min. 230

37 37

Chipboard screw Ø3.5 x 15

min. 230 min. 230

Euroscrew Ø6.3 x 13

NL+3

NL+3 192 192

NL+3

Drilling dimensions for theNL+3 front panel EasyFix attachment ø8 +/-0.1x11

ø8 +/-0.1x11

ø8

32 64 32

32 min. min. 4848

32 min. 48

min. 48

min. 32 min. 4848 min. 48

min. 48

NL=300 mm

64 32 64 32

192 192

x1132

+/-0.1

64 32

ø8 +/-0.1x11

NL=270 mm Screw-in attachment

min. 48

192 192

NL=350 mm

Mounting dimensions for the back panel 9

832 32 8

192 192

8 32 64

64 64

8 32

225 32

225 225 3232 32

NL=400 mm

192 192

32 32

min. min. 49 33 min. min. 49 min. min. 3349

32 32

64 225 32

Installation dimensions for the front panel

NL=450 mm 224 224

32 min. min. 49 NL=500 33

min. min. 49 33

224 224

32 64

32 min. 48 min. 3248 15.5

NL=550 mm

min.

15.5 48

A trial mounting is always recommended. 15.5contact your For further information please 32 Download Titus Tekform supporting representative. documentation 64

from the Titus Tekform website titustekform.com.au 64

2.09R

Tekform Drawer - Slimline

· · · · ·

Assembly Instructions

Screws are not included

Assembly Sequence Connect the drawer sides to the bottom panel (1) and fix it with screws (2)

Chipboard screw Ă&#x2DC;3.5 x 15

192 192

Insert the rear connector vertically (3) and push it downwards into recess in the drawer side (4)

192 192

224 224

Insert the back panel (5) and fix it with screws (6)

224 224

Chipboard screw Ă&#x2DC;3.5 x 15

2.09S

192 192

Tekform Drawer - Slimline

Screws are not included

Insertion of Front Connectors EasyFix Insert the front connectors into holes on the front panel

Front connector

Front panel

Turn the screws 90º into locked position

90º turn

90º

Screw-in fixing

Front connector

Use Ø3 x 15mm screws for fixing Chipboard screw Ø3.5 x 15

Front panel

192

Download supporting documentation from the Titus Tekform website titustekform.com.au 192

2.09T

Assembly Instructions

Front Panel Mounting / Removal Mounting Attach the front panel to the drawer and press to click

Removal Turn the screw anticlockwise to disengage

2.09U

Tekform Drawer - Slimline

Drawer Insertion / Removal Insertion Put the drawer horizontally on the runners and push towards the cabinet until you hear the drawer is locked

Push to fully close

Removal Press-up the button under the drawer. Keep pressed to pull the drawer out

Press-up

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.09V

Tekform Drawer Product Guide

Page

Tekform Drawer Information

2.3

Tekform drawer DW70

2.11

Tekform drawer DW145

2.13

Tekform drawer DW182

2.15

Inner Drawer Fronts For DW70

2.17

For DW145 with square bar

2.19

For DW145 with extension panel

2.21

2.1 2.1

Inner Drawer Fronts

For DW182 with square bar

2.23

For DW182 with extension panel

2.25

Accessories Glass sides 4mm

2.29

Glass sides 8mm

2.30

Industrial Packs

2.27

Drawer storage system

2.31

Assembly and mounting

2.32

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.2 2.2

Tekform drawer Tekform Drawer

Page

Double Wall Drawer Systems

Tekform drawer DW70

Tekform drawer DW145

Tekform drawer DW182

‘EasyFix’ front panel connector

User friendly mounting

Superior vertical and horizontal stability of rails

• • •

Hand insertion Quarter turn lock Repeatable assembly and disassembly possible

2.3

•

Intuitive installation instructions Easy assembly and disassembly of the drawer

• • •

Smooth and silent operating Reliable drawer opening and closing Improved drawer stability in open position

Precise drawer alignment •

•

Tekform drawer provides a +/- 1mm tolerance on drawer bottom width Intuitive drawer front adjustment

Titus damper inside • •

•

Life-long reliable closing Consistent damping at various closing speeds ‘Confident Close’

Tekform Drawer

Quality certified •

By European specialised institutions

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.4

Tekform Drawer Information

Technical Guide How to choose the appropriate drawer dimension?

Select Tekform drawer size based on available cabinet space. Please refer to the below chart with indicated minimum

space required in cabinet to choose appropriate drawer system.

Tekform drawer nominal length (NL) in mm NL

270

300

350

400

Tekform drawer 105mm DW70 Tekform drawer 185mm DW145 Tekform drawer 224mm MINIMAL SPACE REQUIRED DW182 70 standard DWD

500

550

Cabinet depth D

Tekform drawer with inner front Min. height H Cabinet required depth D

NL+min 3mm

115mm

NL+min 12mm

NL+min 3mm

193mm

NL+min 12mm

NL+min 3mm

224mm

NL+min 12mm

Tekform drawer Min. height H required

450

145

H 105 min.

min. 185

D NL+min.3

Tekform drawer is available with ‘EasyFix’ or screw-in front connectors 70

EasyFix’ front connector

min. 115

· hand insertion · quarter turn locking system · expandable plastic dowel NL+min.12 · easy assembly and disassembly of front panel

145 37 Front connector

min. 193

How to fix drawer sides to the front panel?

NL+min.3

NL+min.12

90º Front connector

Screw-in front connector

2.5

· reliable connection · fixing with Ø 3.5x15mm screw (screws are not included)

Tekform Drawer

Technical Guide Bottom panel and back panel cutting dimensions

Dimensions of bottom and back panel depends on:

· cabinet width · nominal drawer length · drawer height

Tekform drawer nominal length (NL) in mm NL

270

300

350

Cabinet width

400

450

500

Front connector

B Back panel

A Bottom panel

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

550

Decorative cover

ICW - 87 +/

Decorative cover Front connector

ICW - 75

ICW ECW

Back panel cutting dimension

Back panel height depends on the B selected drawer height

A Bottom panel

ICW - 87 +/-0.5

H back panel DW70

DW145

151

DW182

Bottom panel cutting dimensions

Back panel

A B

183

min.105

B Back panel

min. 33

ICW - 87 +/-0.5

ICW - 75

+/-0.5

ICW ECW L

ICW - 75

ICW ECW NL

+/-0.5

270

300

350

400

450

500

550

260

290

340

390

440

490

540

NL= Tekform drawer nominal length (in mm) 15.5

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.6 min.105

Tekform Drawer Information

Technical Guide How to choose the appropriate drawer runner fixing positions?

Drawer fixing positions depend on the choosen drawer front type.

Tekform drawer with standard front

When a standard drawer front is applied, use the third hole on the drawer runner to fix it.

Tekform drawer with inner front

When an inner drawer front is applied, use the second hole on the drawer runner for fixing.

front side

Decorative cover 192

192

Load capacity

Tekform drawer load capacity is 40 kg.

192

40kg

A Bottom panel

Expanded tolerances

2.7

B Back panel

192

ICW - 87 +/-0.5

224

224 ICW - 75

+/-0.5

Internal cabinet width tolerance +/- 1mm

Front connector

Adjustment needs to be done on both sides of the drawer

Tekform Drawer

Adjustments Side adjusment

Side adjustment is done through the adjustment screw on the drawer side.

+/- 1mm

Height adjustment

Height adjustment is done through the cam. Release first the locking screw and tighten it back after the front is adjusted.

+/- 2mm

Release

Adjust

3 3

Tighten

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.8

Tekform Drawer Information

Adjustment needs to be done on both sides of the drawer

Adjustments Depth adjustment

Depth adjustment is done through the connecting bar.

Please note: connecting bars can't be used with the 8mm thick glass sides.

Bar length adjustment +/- 2 mm

+/- 2mm

2.9

Tekform Drawer

Key Design Choices 'ConfidentClose'

Fast closing

Late start of damping

Quiet landing

Titus hydraulic damper

Damping action

Even and smooth soft closing action · Soft and reliable closing

Damping force

Stroke Flat damping curve shows the uniform action produced during damper closing at a defined speed.

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.10

in. 9

Tekform Drawer DW70

Anthracite Grey

270

650.8027

150

185*

300

650.8030

150*

185*

350 Decorative cover 400

650.8035

150

185*Rear connector

650.8040

150

185*

450

650.8045

150

185*

500

Decorative 650.8050 > cover

150

185*

550

Front 650.8055 > connector

150

185*

Rear connector Drawer side

Front connector

Drawer runner

Front connector

* Available upon special request

Cutting dimensions details

A Bottom panel

Assembly instructions > see page 2.32

B Back panel

ICW - 87

+/-0.5

One set consists of

ICW - 75

ICW ECW

ECW: External cabinet width +/-0.5 ICW: Internal width ICW - 87 cabinet NL: Nominal length of drawer

B Back panel

A Bottom panel

Drawer runner

2 pcs

Front connectors*

2 pcs

Rear connectors

2 pcs

Decorative covers

2 pcs

ICW - 87 +/-0.5

2 pcs

+/-0.5

B Back panel

Drawer sides L

15.5

ICW - 75

4 Sets

+/-0.5

L=NL-10 For further A explanation > L see page 2.12 32

min.105

Screw-in connector 650.8905.380 min. 33

ICW ECW

min. min. 47.5 49 ICW - 75

10.5

2.11 min. 47.5

32 10+/-0.1

+/-0.5

Rear connector

Item number for a set

Decorative cover

Front connector

Decorative cover

with EasyFix front connector

White

Nominal length

10.5

32 10+/-0.1

* EasyFix connectors supplied. > Order screw-in connectors seprately min. 47.5

Drawe side Drawer runner

• • • •

Drawer runner type Load capacity Minimal height space required Wooden back panel thickness Wooden bottom panel thickness

full extension 40kg 105mm 16mm 16mm

Side adjustment +1/-1mm

Screws are not included

For further explanation > see page 2.36

Installation dimensions

Drawer runner fixing positions

MINIMAL SPACE REQUIRED

Minimum space required for the cabinet 70

145

standard DWD

182

NL+min.3

192

192 192

182

145

192

NL=300 mm NL+min.12

192 192

min. 224

min. 56 32

15.5 15.5 Mounting dimensions for the back panel

NL+min.3

ø10 +/-0.1

ø10 +/-0.1 ø10 +/-0.1

min. 56 32 min. 56 32

min.105min. 115

NL+min.12

NL=270 mm Screw-in attachment

min. 56 32 min. 56 32 min. 56 min. 32 193

EasyFix attachment

Euroscrew ø6.3 x 13

NL+min.3

Drilling dimensions for the front panel

1111

Chipboard screw ø3.5 x 15

min. 224

min. 105

min. 185

Height adjustment +2/-2mm

NL+min.12 192

192 192

192

NL=350 mm

192

min. 32 47.5

32 20

min. 56 32

11 ±0.5±0.5 37.5 37.5 min. 56 32

101

min. 16 33 ø10 +/-0.1 min. 32 47.5 32 min. 47.5

15.5 9 min. 16 33 16 min. 33

Tekform Drawer

•

37.5

Installation dimensions for the front panel

192 192

192

NL=400 mm 192

±0.5

192 192

192

NL=450 mm

15.5

min. 16 33

min. 32 47.5

192

224 224

224

NL=500 mm 224

37.5

224 224

±0.5

224

NL=550 mm 224

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.12

Tekform Drawer DW145

Anthracite Grey

Connecting bar

650.8127

150

185*

300

650.8130

150*

185*

350

650.8135

150

Decorative400 cover 450

650.8140

150

runner 185* Rear 185*connector

Drawer side

Front connector

650.8145

150

185*

500

650.8150

150

185*

550

Decorative 650.8155 > cover

150

185*

Decorative cover Item number for a set

Front 270 connector

Rear connector

Decorative cover

Front connector

Drawer runner

with EasyFix front connector

White

Nominal length

connector

One set consists of

A Bottom panel

ICW - 75

A Bottom panel

ECW: External cabinet width +/-0.5 ICW: Internal width ICW - 87 cabinet NL: Nominal length of drawer

B Back panel

2 pcs

Connecting bars

2 pcs

Front connectors

2 pcs

Rear connectors

2 pcs

Decorative covers

2 pcs

L=NL-10

Front connector

ICW - 75

4 Sets

2.13

151

Rear L connector

Decorative cover

ICW ECW

Drawer runner

ICW - 87 +/-0.5

Connecting bar

min.105

2 pcs

+/-0.5

ICW B ECW Back panel

Drawer sides

ICW - 87 +/-0.5

+/-0.5

Drawer 15.5 For further explanation > side L A

see page 2.14

10.5

Screw-in connector 650.8905.380 min. 33

Drawer runner

32 +/-0.5 min. ICW - 75min.

47.5 49

* EasyFix connectors supplied. 32 connectors seprately > Order screw-in 10+/-0.1 min. 47.5

Drawe side Drawer runner

AssemblyFront instructions > see page 2.32

B Back panel

Drawe side Drawer

* Available upon special request

Cutting dimensions details

Rear connector

32 20

• • • •

Drawer runner type Load capacity Minimal height space required Wooden back panel thickness Wooden bottom panel thickness

full extension 40kg 185mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Screws are not included

Depth adjustment +/-2mm

For further explanation > see page 2.36

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

145

182

Chipboard screw ø3.5 x 15

min. 224

min. 185

Euroscrew ø6.3 x 13

NL+min.3

192

NL=270 mm

Drilling dimensions for the front panel

182

145 Screw-in attachment

EasyFix attachment 37

192

NL=350 mm

NL=300 mm

NL+min.12

192 192

192

192 192

192

min. 56

96 11

min. 32 96 56 ø10 +/-0.1 min. 224

NL+min.12

min. 32 min. 32 56 96 56

ø10 +/-0.1

min. ø10 32 +/-0.196 56

min. 32 56

min. 193

192

min.185

192 192

Mounting dimensions for the back panel

192 192

min. 32 47.5

Installation dimensions for the front panel

192

NL=400 mm 15.5

37.5±0.5

96 min. 32 47.5

192

224

min. 32 47.5

15.5

min.16 33

224 224

224

NL=500 mm

192 192

192

NL=450 mm

min. 56

min. 32 56

37.5±0.5

min.16 ø10 +/-0.1 33

min. 32 47.5

32 32 32 39

180

min.16 33

15.5 9

37.5±0.5

192

15.5

224 224

224

NL=550 mm 224

37.5±0.5

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.14

Tekform Drawer

•

CW W

Item number for a set

Decorative 270cover650.8227 >

Rear connector

Front 300 650.8230 > connector

Decorative cover Drawer side

Front connector

with EasyFix front connector

150

185*

150*

185*

350

650.8235

150

185*

Decorative 400 cover 450

650.8240

150

185*

650.8245

150

185*

500

650.8250

150

185*

550

Decorative150 650.8255 > cover

185*

Front connector

Drawer runner

Anthracite Grey

Connecting bar

White

Tekform Drawer DW182

Nominal length

Drawer runner

Front > see page 2.32 Assembly instructions connector

One set consists of

ICW - 87 +/-0.5

B Back panel

ECW: External cabinet widthICW - 75 +/-0.5 ICW: Internal width ICW - 87 cabinet NL: Nominal length of drawer

ICW ECW

A Bottom panel

+/-0.5

B Back panel

ICW - 75

183

+/-0.5

L=NL-10 For further explanation > A see page 2.16

2 pcs

Connecting bars

2 pcs

Front connectors

2 pcs

Rear connectors

2 pcs

Decorative covers

2 pcs

* EasyFix connectors supplied. 10.5 > Order screw-in connectors seprately ICW -32 75

min.105

2.15

Drawer runner

15.5

Screw-in connector 650.8905.380

ICW ECW

2 pcs

ICW - 87 +/-0.5

4 Sets

Drawer sides B

B Back panel

A Bottom panel

min. 33

+/-0.5

min. min. 47.5 49

32 min. 47.5

10+/-0.1

Draw side

Rear Drawer connector runner

Dra sid

Drawe runner

* Available upon special request

Cutting dimensions details

Rear connector

• • • •

Drawer runner type Load capacity Minimal height space required Wooden back panel thickness Wooden bottom panel thickness

full extension 40kg 224mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Screws are not included

Depth adjustment +/-2mm

For further explanation > see page 2.36

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

182 37

Chipboard screw ø3.5 x 15

min. 224

Euroscrew ø6.3 x 13

NL+min.3

192

NL=270 mm

Drilling dimensions for the front panel

182Screw-in attachment

EasyFix attachment

NL=350 mm

15.5

±0.5

37.5

192

15.5 min. 32 128 56 min. 32 47.5

ø10

min. 32 56

min. 32 47.5 +/-0.1

128

15.5

37.5

192 192

192

NL=400 mm

min.16 min. 32 33 47.5

64 32 8 32 32

212

min.16 33

192 192

192

Mounting dimensions for the back panel

±0.5

192

min. 32 56

ø10 +/-0.1 min. 32 56

128

NL+min.12

min. 32 128 56 min. 32 56

ø10 +/-0.1

min. ø10 32 +/-0.1128 56

128

192 192

192

NL=300 mm

192

NL=450 mm

±0.5

37.5

192 192

192

224 224

Installation dimensions for the front panel 224

NL=500 mm 224

224 224

min. 32 47.5

15.5 min.16 33

min.16 33

192

min. 32 56

min. 224

192 192

224

NL=550 mm 224

±0.5

37.5

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.16

Tekform Drawer

•

Inner Drawer Front for Tekform Drawer DW70

Length

Item number

White

Anthracite Grey

External cabinet width

110

Inner Drawer Front, Assembled

Thickness of carcass side panel

ECW L

600

562

650.8501

511*

512*

800

762

650.8502

511*

512*

600

558

650.8498

511*

512*

800

758

650.8499

511*

512*

* Available upon special request

L 100

Assembly instructions > see page 2.39

20 Pcs

Front panel

Made of plastic and aluminium 600

650.8565

511*

515*

800

650.8566

511*

515*

900

650.8567

511*

515*

1000

650.8568

511*

515*

1200

650.8569

511

515*

350*

385*

100

Front Panel

Cutting dimension= ICW-90 ICW > see page 2.18

* Available upon special request Set includes bottom panel supports (2 Pcs) Assembly instructions > see page 2.39

20 Pcs

Made of aluminium

Front Bracket Set DW70 (L+R)

650.8912 * Available upon special request

ICW ECW

40 Sets Bottom panel support 650.8908.350

2.17

Made of plastic and aluminium

Assembly instructions > see page 2.39

Front panel

MINIMAL SPACE REQUIRED standard DWD

Front bracket

For further explanation > see page 2.36

145

182

min. 224

min. 185

37 min. 105

Height adjustment +2/-2mm

NL+min.3

Installation dimensions

NL+min.3

Drawer runner fixing positions

Minimum space required for the cabinet

182

145

ICW-92 NL+min.12

min. 193

min. 115

min. 224

Front panel

192

NL=270 mm

Cutting dimensions ICW-90 details

192

192 192

NL+min.12

192 192

192

NL=300 mm

192

192 192

192

NL=350 mm

192

192 192

192

NL=400 mm

192

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

Euroscrew Ă¸6.3 x Front 13 bracket

Use the second hole for runner fixing. NL+min.12

ICW ECW

Chipboard screw Ă¸3.5 x 15

192 192

192

NL=450 mm 192

224 224

224

NL=500 mm 224

224 224

224

NL=550 mm 224

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.18

Tekform Drawer

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Drawer DW145 With Square Bar

100

Item number

White

Anthracite Grey

Length

188

173

Inner Drawer Front, Assembled

External cabinet width

Thickness of carcass side panel

ECW L

600

562

650.8505

511*

512*

800

762

650.8506

511*

512*

600

558

650.8517

511*

512*

800

758

650.8518

511*

512*

* Available upon special request Assembly instructions > see page 2.39

Front panel

20 Pcs

Made of aluminium and plastic

205

100 220

Front Panel

LL Cutting dimension= ICW-90 ICW > see page 2.20

20 Pcs

600

650.8565

511*

515*

800

650.8566

511*

515*

900

650.8567

511*

515*

1000

650.8568

511*

515*

1200

650.8569

511

515*

350*

385*

* Available upon special request Set includes bottom panel supports (2 Pcs) Assembly instructions > see page 2.39

Made of aluminium

Front Bracket DW145 (L+R)

650.8914 * Available upon special request Assembly instructions > see page 2.39

ICW ECW

50 Sets

Made of plastic and aluminium

Square Bar

Cutting dimension= ICW-92 ICW > see page 2.20

600

650.8600

511*

515*

800

650.8601

511*

515*

900

650.8602

511*

515*

1000

650.8603

panel 511*Front515*

1200

650.8604

511

* Available upon special request

Bottom panel support 650.8908.350

2.19

Made of aluminium

Assembly instructions > see page 2.39

50 Pcs

515*

Front brack

Front panel

Height adjustment +2/-2mm

Front bracket

Depth adjustment +/-2mm

For further explanation > see page 2.36

Square bar

145

182

min. 224

min. 185

NL+min.3

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

182

145 37

Chipboard screw Ă¸3.5 x 15

min. 224

min. 193

ICW-92

Front panel

Euroscrew Front bracket Ă¸6.3 x 13

Use the second hole for runner fixing. NL+min.12

NL+min.12

192

NL=270 mm

Cutting dimensions ICW-90 details Front panel

192 Front bracket

192 192

192

NL=300 mm

Square bar

192

192 192

192

NL=350 mm

192

ICW ECW

192 192

192

NL=400 mm 192

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

192 192

192

NL=450 mm 192

224 224

224

NL=500 mm 224

224 224

224

NL=550 mm 224

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.20

Tekform Drawer

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Drawer DW145 With Extension Panel

100

Item number

White

Anthracite Grey

Length

188

173

Inner Drawer Front, Assembled

External cabinet width

Thickness of carcass side panel

ECW L

600

562

650.8503

511*

512*

800

752

650.8504

511*

512*

600

558

650.8515

511*

512*

800

758

650.8516

511*

512*

* Available upon special request Assembly instructions > see page 2.39

Front panel

20 Pcs

Made of aluminium and plastic

205

100 220

Front Panel

L L Cutting dimension= ICW-90 ICW > see page 2.22

20 Pcs

600

650.8565

511*

512*

800

650.8566

511*

512*

900

650.8567

511*

512*

1000

650.8568

511*

512*

1200

650.8569

511

512*

350*

380*

* Available upon special request Set includes bottom panel supports (2 Pcs) Assembly instructions > see page 2.39

Made of aluminium

Front Bracket DW145 (L+R)

650.8913 * Available upon special request Assembly instructions > see page 2.39

ICW ECW

50 Sets

Made of plastic and aluminium

Extension Panel

Cutting dimension= ICW-98 ICW > see page 2.22 Front panel width - cut

20 Pcs Bottom panel support 650.8908.350

2.21

Made of aluminium ICW-90

600

650.8590

511*

512*

800

650.8591

511*

512*

900

650.8592

511*

512*

1000

650.8593

511*

1200

650.8594

* Available upon special request Assembly instructions > see page 2.39

511

512*

Front panel

512*

Front br

Front panel

Height adjustment +2/-2mm

Depth adjustment +/-2mm

For further explanation > see page 2.36

Front bracket Extension panel

145

182

min. 224

min. 185

NL+min.3

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

182

145

Chipboard screw Ă¸3.5 x 15

min. 224

min. 193

ICW-92

NL+min.12

Front panel Use the second hole for runner fixing. NL+min.12

192

NL=270 mm

192

Cutting dimensions ICW-90 details Front panel

Front bracket

Euroscrew Ă¸6.3 xFront 13 bracket

192 192

192

NL=300 mm

Extension panel

192

192 192

192

NL=350 mm 192

ICW ECW

192 192

192

NL=400 mm 192

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

192 192

192

NL=450 mm 192

224 224

224

NL=500 mm 224

224 224

224

NL=550 mm 224

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.22

Tekform Drawer

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Drawer DW182 With Square Bar

100

Item number

White

Anthracite Grey

Length

220

205

Inner Drawer Front, Assembled

External cabinet width

Thickness of carcass side panel

173

188

ECW L

600

562

650.8511

511*

515*

800

762

650.8512

511*

515*

600

558

650.8523

511*

515*

800

758

650.8524

511*

515*

* Available upon special request Assembly instructions > see page 2.39

Front panel

20 Pcs

Made of aluminium and plastic

100

Front Panel

L Cutting dimension= ICW-90 ICW > see page 24

20 Pcs

600

650.8565

511*

512*

800

650.8566

511*

512*

900

650.8567

511*

512*

1000

650.8568

511*

512*

1200

650.8569

511

512*

350*

385*

* Available upon special request Set includes bottom panel supports (2 Pcs) Assembly instructions > see page 2.39

Made of aluminium

Front Bracket DW182 (L+R)

650.8916 * Available upon special request Assembly instructions > see page 2.39

ICW ECW

50 Sets

Made of plastic and aluminium

Square Bar

Cutting dimension= ICW-92 ICW > see page 24

600

650.8600

511*

515*

800

650.8601

511*

515*

900

650.8602

511*

515*

1000

650.8603

panel 511*Front515*

1200

650.8604

511

* Available upon special request

Bottom panel support 650.8908.350

2.23

Made of aluminium

Assembly instructions > see page 2.39

50 Pcs

515*

Front brack

Front panel

Height adjustment +2/-2mm

Depth adjustment +/-2mm

For further explanation > see page 2.36

Front bracket Square bar

182

min. 224

NL+min.3

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

182 37

min. 224

Chipboard screw Ă¸3.5 x 15

ICW-92

Front panel

Euroscrew Front bracket Ă¸6.3 x 13

Use the second hole for runner fixing. NL+min.12

192

NL=270 mm

ICW-90

Cutting dimensions details

192

NL=300 mm

192

192 192

192

192 192

192

NL=400 mm 192

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

192 192

192

NL=350 mm

ICW ECW

192 192

192

NL=450 mm 192

224 224

224

NL=500 mm 224

224 224

224

NL=550 mm 224

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.24

Tekform Drawer

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Drawer DW182 With Extension Panel

100

Item number

White

Anthracite Grey

Length

220

205

Inner Drawer Front, Assembled

External cabinet width

Thickness of carcass side panel

173

188

ECW L

600

562

650.8509

511*

512*

800

762

650.8510

511*

512*

600

558

650.8521

511*

512*

800

758

650.8522

511*

512*

* Available upon special request Assembly instructions > see page 2.39

Front panel

20 Pcs

Made of aluminium and plastic

100

Front Panel

L Cutting dimension= ICW-90 ICW > see page 2.26

20 Pcs

600

650.8565

511*

512*

800

650.8566

511*

512*

900

650.8567

511*

512*

1000

650.8568

511*

512*

1200

650.8569

511

512*

350*

380*

* Available upon special request Set includes bottom panel supports (2 Pcs) Assembly instructions > see page 2.39

Made of aluminium

Front Bracket DW182 (L+R)

650.8915 * Available upon special request Assembly instructions > see page 2.39

ICW ECW

50 Sets

Made of plastic and aluminium

103

Extension Panel

Cutting dimension= ICW-98 ICW > Front see page panel2.26 width - cut

600

650.8610

511*

512*

800

650.8611

511*

512*

900

650.8612

511*

512*

1000

650.8613

511*

512*

1200

650.8614

511

512*

* Available upon special request Assembly instructions > see page 2.39

20 Pcs Bottom panel support 650.8908.350

2.25

Made of aluminium ICW-90

Front panel

Fron

Front panel

Height adjustment +2/-2mm

Front bracket

Depth adjustment +/-2mm

For further explanation > see page 2.36

Extension panel

182

min. 224

NL+min.3

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

182 Chipboard screw Ă¸3.5 x 15

min. 224

Euroscrew Ă¸6.3 x 13

ICW-92

Front panel

Front bracket

Use the second hole for runner fixing. NL+min.12

192

NL=270 mm

192

Cutting dimensions ICW-90 details

192 192

192

NL=300 mm

192

192 192

192

NL=350 mm 192

ICW ECW

192 192

192

NL=400 mm 192

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

192 192

192

NL=450 mm 192

224 224

224

NL=500 mm 224

224 224

224

NL=550 mm 224

A trial mounting is always recommended. For further information please contact Titus Tekform. Download supporting documentation from the Titus Tekform website titustekform.com.au

2.26

Tekform Drawer

Side adjustment +1/-1mm

Tekform Drawer Industrial Packaging

14 Pcs Drawer Side

14 Pcs

2.27

Anthracite Grey

Drawer Runner

White

Nominal length

Left 270

660.8C27

150

185

300

660.8C30

150

185

350

660.8C35

150

185

400

660.8C40

150

185

450

660.8C45

150

185

500

660.8C50

150

185

550

660.8C55

150

185

Right 270

660.8D27

150

185

300

660.8D30

150

185

350

660.8D35

150

185

400

660.8D40

150

185

450

660.8D45

150

185

500

660.8D50

150

185

550

660.8D55

150

185

Item number

Left 270

660.8A27

040

300

660.8A30

040

350

660.8A35

040

400

660.8A40

040

450

660.8A45

040

500

660.8A50

040

550

660.8A55

040

Right 270

660.8B27

040

300

660.8B30

040

350

660.8B35

040

400

660.8B40

040

450

660.8B45

040

500

660.8B50

040

550

660.8B55

040

* Left and right sold separately

•

Bulk packaging is easier for large scale production and storage Environmental choice for large drawer projects, as it saves disposing of large boxes Save space and time on your drawer production line

•

All bulk packaged parts are available upon special request

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Depth adjustment +/-2mm

Tekform Drawer

•

Nominal length

Item number

White

Anthracite Grey

270

650.8727

150

185

300

650.8730

150

185

350

650.8735

150

185

400

650.8740

150

185

450

650.8745

150

185

500

650.8750

150

185

550

650.8755

150

185

for DW70

650.8901

150

185

for DW145

650.8902

150

185

for DW182

650.8903

150

185

EasyFix

650.8907

380

Screw-in

650.8905

380

Tekform by Titus

650.8904

350

385

Generic

650.8906

350

385

Square Side Bar

20 Pairs Rear Connectors

50 Pairs Front Connectors

EasyFix

Screw-in

400 Pcs Decorative Cover

2000 Pcs

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.28

Accessories Glass Sides 4mm with Side Bar

• • •

4mm glass sides must be applied with drawer side bars Tempered glass for improved user safety Depth front adjustment through side bars enabled

391

392*

300

650.8402

391

392*

350

650.8403

391

392*

400

650.8404

391

392*

450

650.8405

391

392*

500

650.8406

391

392*

550

650.8407

391

392*

650.8484

Glass side

Glass clip set

Glass clips

350

* Available upon special request Assembly instructions > see page 2.37

Front panel

650.8427

391

392*

300

650.8430

391

392*

350

650.8435

391

392*

400

650.8440

391

392*

450

650.8445

391

392*

500

650.8450

391

392*

550

650.8455

391

392*

650.8485

Glass side set 270

ICW ECW

Glass side

Glass clip set

* Available upon special request Assembly instructions > see page 2.37 Glass clips

10 Sets (glass sides) 50 Sets (glass clips)

2.29

385*

Made of tempered glass, glass clips made of plastic

Glass Sides for DW182

Front panel

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R

10 Sets (glass sides) 50 Sets (glass clips)

Anthracite Grey

650.8401

Glass Sides for DW145

Item number

White

Transparent glass

Glass side set 270

Nominal length

Frosted glass

ICW ECW

Made of tempered glass, glass clips made of plastic

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R

350

385*

â&#x20AC;˘ â&#x20AC;˘

8mm glass sides don't require side rails Tempered glass for improved user safety

Tekform Drawer

Accessories Glass Sides 8mm

80 110

Glass side

650.8461 >

391

392*

350

650.8462

391

392*

400

650.8463

391

392*

450

650.8464

391

392*

500

650.8465

391

392*

550

650.8466

391

392*

650.8488

Anthracite Grey

392*

White

391

300

Glass clip set Glass clips

650.8460

Transparent glass

Glass side set 270

Glass Sides for DW145

Item number

Frosted glass

Nominal length

Front panel

350

385*

* Available upon special request Assembly instructions > see page 2.37

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R 10 Sets (glass sides) 50 Sets (glass clips)

ICW ECW

Front panel

Glass side set 270

110

Glass Sides for DW182

Made of tempered glass, glass clips made of plastic

Glass side

Glass clip set

650.8467

391

392*

300

650.8468 >

391

392*

350

650.8469

391

392*

400

650.8470

391

392*

450

650.8471

391

392*

500

650.8472

391

392*

550

650.8473

391

392*

650.8489

350

385*

* Available upon special request Assembly instructions > see page 2.37 Glass clips

10 Sets (glass sides) 50 Sets (glass clips)

ICW ECW

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R

Made of tempered glass, glass clips made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.30

Accessories Drawer Storage System

Nominal length

Item number

White

Anthracite Grey

External cabinet width

Drawer Storage System for DW145

Max. 800

400

650.8770

511*

515*

Max. 800

450

650.8771

511*

515*

Max. 800

500

650.8772

511

515*

Max. 800

550

650.8773

511*

515*

Max. 1200

400

650.8774

511*

515*

Max. 1200

450

650.8775

511*

515*

Max. 1200

500

650.8776

511*

515*

Max. 1200

550

650.8777

511*

515*

* Available upon special request

One set consists of: 3 pcs longitudinal bars 2 pcs transversal bars 4 pcs bar fittings 6 pcs cross connections

12 Sets

Made of aluminium and plastic Divider

600

650.8706

511*

515*

800

650.8708

511*

515*

900

650.8709

511*

515*

1000

650.8710

511*

515*

1200

650.8712

511

515*

Riser

650.8703

511

515*

Divider fitting

650.8704

511

515*

Drawer Storage System for DW182

Divider

* Available upon special request

Divider Fitting

20 Pcs (divider) 50 Sets (divider fitting L+R) 100 Pcs (riser)

2.31

Riser

Made of aluminium and plastic

Assembly Instructions

Tekform Drawer

Screws are not included

Assembly Sequence Connect the drawer sides to the bottom 1 panel (1) and fix it with screws (2)

Chipboard screw Ă¸3.5 x 15

192 192

Insert the rear connector vertically (3) and push it downwards into recess in the drawer side (4)

192 192

224 224

Insert the back panel (5) and fix it with screws (6)

224 224

Chipboard screw Ă¸3.5 x 15

Download supporting documentation from the Titus Tekform website titustekform.com.au 192 192

2.32

Assembly Instructions

Screws are not included

Insertion of Front Connectors EasyFix Insert the front connectors into holes on the front panel

Front connector

Front panel

Turn the screws for 90º into locked position

90º turn

90º

Screw-in Fixing Use ø3.5 x 15mm for fixing

Front connectors Chipboard screw ø3.5 x 15

Front panel

192

2.33 192

Tekform Drawer

Assembly Instructions

Front Panel Mounting / Removal Mounting Attach the front panel to the drawer and press to click

Removal Pull down with the screwdriver and rotate to disengage

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.34

Assembly Instructions

Drawer Insertion / Removal Insertion Put the drawer horizontally on the runners and push towards the cabinet until you hear the drawer is locked

Push to fully close

Removal Press and hold the button to pull the drawer out

Press-up

2.35

Adjustments

Adjustment needs to be done on both sides of the drawer

3 3

Tekform Drawer

Side / Height Adjustment Side Adjustment The side adjustment enables drawer front alignment with the side of the cabinet and perfect lifetime opening and closing of the drawer.

+/- 1 mm

To align the drawer front with the cabinet side rotate the adjustment screw.

Height Adjustment Height adjustment enables perfect vertical position of the drawer. To align the drawer front release the locking screw (1), rotate the excentric dowel (2) and tighten the locking screw back (3)

+/- 2 mm

Release

Adjust

Tighten

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.36

Accessories Mounting

Screws are not included

Mounting of Glass Sides Glass Sides 4mm

Glass Sides 8mm

2.37

Tekform Drawer

Accessories Mounting

Mounting of Square Connecting Bars Bar length adjustment +/- 2 mm

Side Bars (for DW145 and DW182)

Drilling dimension for Glass sides 8mm

Tekform drawer DW145

Tekform drawer DW182

Back panel mounting dimensions

Front panel drilling dimensions EasyFix frot connector

Installation dimensions for front panel

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.38

Accessories Mounting

Assembly of Inner Drawer Front DW70

DW145 and DW182 with square connecting bar

DW145 and DW182 with extension panel

2.39

Page

Tekform Drawer - Single Wall

Tekform Drawer SW85

2.43

Tekform Drawer SW117

2.45

Tekform Drawer SW150

2.47

Tekform Drawer SW200

2.49

Accessories Front Clips

2.51

Round Railings

2.52

2.40

Drawer Runners

Tekform Drawer Single Wall Product Guide

Single Wall Drawer Systems

Tekform drawer SW85

Tekform drawer SW117

Tekform drawer SW150

Tekform drawer SW200

Versatile and Reliable The single-wall Tekform drawer is the perfect solution to solve kitchen, wardrobe and bathroom vanity drawer applications. Both strong and affordable, the drawer’s fluid sliding movement is due to the use of a roller slide system, whilst the epoxy coating makes it silent during operation. The product is available in a large range of heights and depths. The immediate vertical adjustment makes the drawer very versatile and easy to use; it is also ideal both for automatic and manual assembly.

Lifetime warranty •

50,000 cycle tested lifetime warranty

Quality certified • • • •

2.41

By European specialized institutions Level 5 Heavy Domestic CATAS FIRA

Tekform Drawer - Single Wall

Tekform Single Wall Drawer

Tekform SW Drawer front bracket varies slightly from this image.

Easy front fixing •

•

Front clips available for all drawer fixing methods Spring loaded action for easy location of the drawer front

User friendly mounting •

•

Intuitive installation instructions Easy assembly and disassembly of the drawer Assembly equipment available

Precise drawer alignment • • •

Huge vertical cam adjustment Provides a total +/- 4mm adjustment Side adjustment +/- 1.5mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.42

Item number

White

with Tekform front clip

Machine insertion 500

603.8C68.050

150

Screw on 250

603.8C61.025

150

270

603.8C61.027

150

350

603.8C61.035

150

400

603.8C61.040

150

450

603.8C61.045

150

500

603.8C61.050

150

550

603.8C61.055

150

C15 assembly 250

603.8C62.025

150

270

603.8C62.027

150

350

603.8C62.035

150

400

603.8C62.040

150

450

603.8C62.045

150

500

603.8C62.050

150

550

603.8C62.055

150

Drawer side

Drawer runner

Front clip

Nominal length

Tekform Drawer SW85

Cutting dimensions details

One set consists of ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

Drawer sides

2 pcs

Drawer runner

2 pcs

Assembly instructions > page 2.53

1 Pair May be used with Titusoft damper for metal drawers (MD) or the Titus Push Latch. Push latch > page 1.109

2.43

Titusoft MD > page 1.129 Front clips > page 2.51

• • •

• • • •

Large range of dimensions from 250 to 550 mm depth Screw on, dowel fixing machine insertion ready or C15 assembly options Simple bottom mounting for ease of assembly Unilateral restraint-guide compensates for tolerances

Drawer runner type Load capacity Minimal height space required Wooden back panel thickness

Side adjustment +/- 1.5mm

Single extension roller 25kg 106.5mm 12-18mm

Installation dimensions and drilling patterns

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Bottom panel width

Installation and back panel dimensions

Drawer runner mounting

13 Fixing screws for front brackets and drawer runner

7.5 7.5 7.5 7.5 4 12

1212

Euro screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

10000 Pcs

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

2.44

Tekform Drawer - Single Wall

•

with Tekform front clip

Item number

White

Nominal length

Tekform Drawer SW117

Screw on 250

603.8C71.025

150

270

603.8C71.027

150

350

603.8C71.035

150

400

603.8C71.040

150

450

603.8C71.045

150

500

603.8C71.050

150

550

603.8C71.055

150

C15 assembly 250

603.8C72.025

150

270

603.8C72.027

150

350

603.8C72.035

150

400

603.8C72.040

150

450

603.8C72.045

150

500

603.8C72.050

150

550

603.8C72.055

150

Drawer side

Drawer runner

Front clip

Cutting dimensions details

One set consists of ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

Drawer sides

2 pcs

Drawer runner

2 pcs

Assembly instructions > page 2.53

1 Set May be used with Titusoft damper for metal drawers (MD) or the Titus Push Latch. Push latch > page 1.109

2.45

Titusoft MD > page 1.129 Front clips > page 2.51

• • •

• • • •

Drawer runner type Load capacity Minimal height space required Wooden back panel thickness

Side adjustment +/- 1.5 mm

Roller slides 25kg 138.5mm 12-18mm

Installation dimensions and drilling patterns

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Bottom panel width

Installation and back panel dimensions

Drawer runner mounting

13 Fixing screws for front brackets and drawer runner

7.5 7.5 7.5 7.5 4 12

1212

Euro screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

10000 Pcs

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

2.46

Tekform Drawer - Single Wall

•

with Tekform front clip

Item number

White

Nominal length

Tekform Drawer SW150

Screw on 250

603.8C81.025

150

270

603.8C81.027

150

350

603.8C81.035

150

400

603.8C81.040

150

450

603.8C81.045

150

500

603.8C81.050

150

550

603.8C81.055

150

C15 assembly 250

603.8C82.025

150

270

603.8C82.027

150

350

603.8C82.035

150

400

603.8C82.040

150

450

603.8C82.045

150

500

603.8C82.050

150

550

603.8C82.055

150

Drawer side

Drawer runner

Front clip

Cutting dimensions details

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

One set consists of Drawer sides

2 pcs

Drawer runner

2 pcs

Assembly instructions > page 2.53

1 Pair May be used with Titusoft damper for metal drawers (MD) or the Titus Push Latch. Push latch > page 1.109

2.47

Titusoft MD > page 1.129 Front clips > page 2.51

• • •

• • • •

Drawer runner type Load capacity Minimal height space required Wooden back panel thickness

Side adjustment +/- 1.5 mm

Roller slides 25kg 170.5mm 12-18mm

Installation dimensions and drilling patterns

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Bottom panel width

Installation and back panel dimensions

Drawer runner mounting

13 Fixing screws for front brackets and drawer runner

7.5 7.5 7.5 7.5 4 12

1212

Euro screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

10000 Pcs

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

2.48

Tekform Drawer - Single Wall

•

Item number

White

with Tekform front clip

Screw on 250

603.8C91.025

150

270

603.8C91.027

150

350

603.8C91.035

150

400

603.8C91.040

150

450

603.8C91.045

150

500

603.8C91.050

150

550

603.8C91.055

150

C15 assembly 250

603.8C92.025

150

270

603.8C92.027

150

350

603.8C92.035

150

400

603.8C92.040

150

450

603.8C92.045

150

500

603.8C92.050

150

550

603.8C92.055

150

Drawer side

Drawer runner

Nominal length

Tekform Drawer SW200

Front clip

Cutting dimensions details

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

One set consists of Drawer sides

2 pcs

Drawer runner

2 pcs

Assembly instructions > page 2.53

1 Pair May be used with Titusoft damper for metal drawers (MD) or the Titus Push Latch. Push latch > page 1.109

2.49

Titusoft MD > page 1.129 Front clips > page 2.51

• • •

• • • •

Drawer runner type Load capacity Minimal height space required Wooden back panel thickness

Side adjustment +/- 1.5 mm

Roller slides 25kg 233.5mm 12-18mm

Installation dimensions and drilling patterns

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Installation and back panel dimensions

Drawer runner mounting

13 Fixing screws for front brackets and drawer runner

7.5 7.5 7.5 7.5 4 12

1212

Euro screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

10000 Pcs

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

2.50

Tekform Drawer - Single Wall

•

Accessories â&#x20AC;˘ â&#x20AC;˘

Front clips must be ordered separately Chose clip based on your preferred mounting method

Side

Front Clips

Mounting

Item number

Screw on

603.8C46.005

Left

Screw on

603.8C46.006

Right

Machine insertion

603.8C46.010

Left

Machine insertion

603.8C46.012

Right

Expanding dowel

603.8C46.015

Left

Expanding dowel

603.8C46.016

Front Clips Right

Screw on

Machine insertion 10mm

Expanding dowel 10mm

1 Pce

2.51

Accessories •

Length (mm)

•

Improved storage in high drawers Clips for wooden and metal backs Easy one-step fixing and screw-on front attachment Lasting quality

Round Railing

Item number

EasyFix 250

603.8C98

8)"5/)(9/:0; 8)"5/)(9/:0;

EasyFix Railing

Ø10 L

!74)

!74) !27)

!27)

564)

564) 557

557

404)

404) 577

577

464)

464) 457

521)

350

521)

603.8C98

!"1)

!57

!"1)

421)

400

603.8C98 204) 204)

211) 211) 8)"5/)(9/:0; 221) 221) !21

!"1)

411)

< 264) !64

450

500

550

521)

421)

Screw-on 411) 250 411) L

257)

045

> !27)

050

577 > 457

204) !21 !21

477) !!"32 !!"32 > 257) !4"32) !4"32)

!"1)

521)

521) 5!"32) 5!"32)

421)

421) 4!"32 4!"32

603.8C98 411) 411) 211) 211) 603.8C98 <

350

!"1) 603.8C98

!4"32) >

521)

5!"32)

411)

400

411)

603.8C98 421)

421

02806807 02806807

211

611

"11

="2&+/0( 711 711 5&90; 911 911 511 411 Back bracket (wood)

145

575

02806807 455 455 500 02806807 603.8C98 > 02806807 02806807

255

02806807 02806807

655

150

="2&+/0(:"+/*( 02806807 "55 > "55 550 02806807 603.8C98 0;&4>+/## 02806807 02806807 02806807

755 !55

155

755

02806807

603.8C98555>

02806807

575

211

02806807

455

02806807

255

"11

140

603.8C98

421 611

135

5""32

127

> 4!"32

="2&+/0(:"+/*( ="2&+/0(:"+/*( 0;&4>+/## 0;&4>+/## - 4""32) 211) 02806807 02806807 !55 !55 221) 2!"32 > 02806807 02806807 555 555

125

4""32) 4""32) > 221) 2!"32 2!"32 !!"32

421) ="2&+/0( ="2&+/0( 5&90; 5&90; 211) 511 511 221) 411 411

450

055

> 5""32 5""32

270

521)

Screw-on Railing

603.8C98 264)

221) !21

040

477)

211) 211) 8)"5/)(9/:0; 221) 221) !21 !"1)

464)

035

557

404) 603.8C98

421) 8)"5/)(9/:0; 8)"5/)(9/:0; 211) !21 !21 221) !"1) !"1)

027

457

> 477)

564)

411) min. 11

264) 257) !57

603.8C98 !74)

521) Ø10

025

!57 >

!64 !64 603.8C98

421)

min. 11 min. 11

!21 270

411) Ø10

!21

#$%&'()*+,'-)+-).. #$%&'()*+,'-)+-).. 655 02806807

711

02806807

911

02806807

#$%&'()*+,'-)+-)..

Tekform Drawer - Single Wall

•

White

•

200

!""

"55 755

!""

1 Pair

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.52

64 10

H=85

Accessories -

180

H=117

Tubes positioning Drawer

SW85

32 - 48 - 64

SW117

48 - 64 - 80

Assembly Instructions !"#$%&'()*)$+&,"'&8""%.$&0(12&3($.*&4&(55.-0*6&5.7#.$1.

32 a 32 b-16 64

H=117

37.5

32 32 d-32 H=150

37.5

d= 96 min.

3 4

32 64

±2°

b= 64 min.

4.5

H=85

37.5 32

7.5

8.5

a= 64 min.

Round Railing for Wooden Back Panel Assembly Sequence

!""

2.53

Drawer Runners Ball Bearing Drawer Runners • •

Standard Side

603.8B20.027

342

350

Soft

Side

603.8B20.035

450

400

Soft

Side

603.8B20.040

450

Soft

Side

603.8B20.045

450

500

Soft

Side

603.8B20.050

450

550

Soft

Side

603.8B20.055

450

600

Soft

Side

603.8B20.060

450

Zinc plated

Mounting

350

Item number

Made of steel

Ball Bearing Drawer Runners, Full Extension with Soft Close

10 Set

Closing

100 Sets

Weight capacity (kg)

Ball Bearing Drawer Runners, Full Extension

Length (mm)

Drawer Runners

•

Full extension Ball bearing Integrated soft-close

Made of steel

2.54

Drawer Runners Ball Bearing Drawer Runners â&#x20AC;˘

2.55

603.8B20.025

454

300

Standard Side

603.8B21.030

454

350

Standard Side

603.8B21.035

454

400

Standard Side

603.8B21.040

454

450

Standard Side

603.8B21.045

454

500

Standard Side

603.8B21.050

454

550

Standard Side

603.8B21.055

454

600

Standard Side

603.8B21.060

454

250

Standard Side

603.8B20.025

450

300

Standard Side

603.8B21.030

450

350

Standard Side

603.8B21.035

450

400

Standard Side

603.8B21.040

450

Standard Side

603.8B21.045

450

500

Standard Side

603.8B21.050

450

550

Standard Side

603.8B21.055

450

600

Standard Side

603.8B21.060

450

650

Standard Side

603.8B21.065

450

700

Standard Side

603.8B21.070

450

Zinc plated

Standard Side

Black

Mounting

250

Item number

Made of steel

Ball Bearing Drawer Runners, Full Extension

10 Sets

Closing

10 Sets

Weight capacity (kg)

Ball Bearing Drawer Runners, Full Extension

Full extension Ball bearing

Length (mm)

â&#x20AC;˘

Made of steel

2.56

Drawer Runners

Tekform Bottom Mounted Roller Runners

1 Pair

Download supporting documentation from the Titus Tekform website titustekform.

2.57

Weight Capacity (kg)

Item number

250

603.8C05.025

001

300

603.8C05.030

001

350

603.8C05.035

001

400

603.8C05.040

001

450

603.8C05.045

001

500

603.8C05.050

001

550

603.8C05.055

001

600

603.8C05.060

001

White

Length (mm)

Closing: Standard Mounting: Bottom

• •

25kg dynamic standard capacity Easy assembly Add-on SlowMotion damping available

Roller Runners

•

Drawer mounting and dimensions

Standard position for the dowels

Slides fixing dimensions

Download supporting documentation from the Titus Tekform website titustekform.

2.58

Furniture Fittings

Furniture Fittings Product guide

Overhead Solutions Page

Aerobus opening System

3.3

Lift-up mechanisms

3.5

Titus Connectors Page

Information

3.7

System 1 Fittings for rigid assembly

3.10

System 3 Fittings for face and edge boring

3.12

System 4 Fittings for face boring only

3.14

System 5 Cams and dowels

3.17

System 6 Quickfit-Expando connectors

3.33

Cabinet and Furniture Legs Page

3.1

Titus Adjustable Cabinet Legs

3.46

Decorative Furniture Legs

3.50

Fastmount® Panel Mounting Page

Information

3.53

Standard Profile Range

3.54

Low Profile Range

3.60

Very Low Profile Range

3.64

Metal Profile Range

3.67

Panel Control Range

3.70

Textile Range

3.71

Installation Tools

3.73

SuperGroove® Adhesive

3.74

3.2

Overhead Solutions Aerobus Opening System • • •

Easy assembly with click-on door fixing No hinges or stabilisation bars required SlowMotion technology for controlled and silent closing Non-invasive slim housing

AeroBus Kit for doors

White

•

Weight (kg)

Item number

1.0 - 5.5

606.8L03.020

000

2.4 - 12.3

606.8L03.040

000

Kit includes: •

•

1 Kit

Symmetrical and dampened mechanisms (2 Pcs) Linear mounting plates for the door fixing (2 Pcs)

•

Ø4 x 15mm screws (6 Pcs)

•

Ø4 x 35mm screws (8 Pcs)

•

Covers: right and left (2 Pcs)

Made of plastic and steel

Choosing the Correct AeroBus System • • •

Door height max is 400mm Door width max depends on the kit’s load capacity Choose from 2 kits depending on height and weight requirements

Door Height

606.8L03.020.000

606.8L03.040.000

400

1.0 - 2.5kg

2.4 - 5.5kg

350

1.1 - 2.9kg

2.7 - 6.3kg

300

1.3 - 3.5kg

3.2 - 7.4kg

250

1.6 - 4.0kg

3.8 - 8.9kg

200

2.0 - 5.0kg

4.8 - 11.0kg

180

2.2 - 5.5kg

5.3 - 12.3kg

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.3

• •

•

Compact and non-invasive system Easy mounting on the cabinet and rapid ﬁxing on the door with a “click” and without hinges Damper included for a controlled and silent closure of the door 3-Way vertical and horizontal adjustment with door weight adjustment

Application Cabinet fixing

max 22

T 5 min.

159

Ø5

7° 10

T = Ø5mm x min. 5mm deep T = pilot holes F = fixing holes

min. 150

55 "T"

153.5

max. 22

00m

107 137

ax 4

H (m

127

28.5

max 22 78-A

78-A

Door fixing

12.5

Adjustments Door adjustment

+/-1.

-2

+2 -2

Damper strength adjustment

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.4

Overhead Solutions

Overhead Solutions Aerobus Opening System

Overhead Solutions AeroFlap Opening System • • •

2 mechanisms, RH & LH 2 dampers for mechanisms 2 covers, RH & LH 2 cover caps 14 Euro screws, Ø6x12mm 12 Self-tapping screws Ø4x35mm Assembly instructions

450 600

4.4-5.2

660

4.0-4.7

450

5.8-7.3

600

5.3-6.7

660

4.8-6.2

450

7.4-9.2

600

6.8-8.4

660

6.3-7.9

450

9.3-10.8

600

8.5-9.9

660

8.0-9.3

450

10.9-14.5

600

10.0-13.0

660

9.4-11.8

720

4.6-6.2

800

4.5-5.9

720

6.3-7.8

800

6.0-7.6

720

7.9-9.3

800

7.7-8.9

720

9.5-12.0

800

9.0-11.4

Door Weight (kg)

Kit includes:

Door Height (mm)

•

Door moves above cabinet opening Perfect pause in every opening position 30 adjustments for door positioning SlowMotion technology for controlled and silent closing

Item number

4.8-5.7

606.8L09.010

660

606.8L09.020

660

606.8L09.030

660

606.8L09.040

660

606.8L09.050

660

606.8L09.110

800

606.8L09.120

800

606.8L09.130

800

606.8L09.140

800

Stabilisation bar, 1200mm > Order separately 606.8L09.150.020

1 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.4A

•

Compact & non-invasive Easy mounting on the cabinet and rapid fixing on the door with a ‘click’ and without hinges Damper included for a controlled and silent closing to the door 3-Way vertical and horizontal adjustment with door weight adjustment

Door Weight (kg)

•

Door Height (mm)

•

Item number

380-500

4.8-3.6

606.8L09.210

500

450-580

6.0-7.6

606.8L09.310

058

450-580

7.7-9.2

606.8L09.320

058

450-580

9.3-11.6

606.8L09.330

058

Kit includes: 2 mechanisms, RH & LH 2 dampers for mechanisms 2 covers, RH & LH 2 cover caps 14 Euro screws, Ø6x12mm 12 Self-tapping screws Ø4x35mm Assembly instructions Stabilisation bar, 1200mm > Order separately 606.8L09.150.020

1 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.4B

Overhead Solutions

Overhead Solutions AeroLoft Opening System

Overhead Solutions AeroSplit Opening System • • • •

Door bi-folds up 125° folding door opening operation, ensuring the second half of the door folds extremely flat Anti-pinch central hinge for safe functioning No stabilisation bar required Perfect pause in every position SlowMotion technology for controlled and silent closing

Door Weight (kg)

•

Door Height (mm)

•

Item number

600

6.8-8.1

606.8L09.510

060

600

8.2-10.0

606.8L09.520

060

720

6.6-8.7

606.8L09.610

072

720

8.8-11.0

606.8L09.620

072

720

11.1-13.3

606.8L09.630

072

800

10.1-12.5

606.8L09.730

080

800

12.6-13.5

606.8L09.740

080

Kit includes: 2 mechanisms, RH & LH 2 dampers for mechanisms 2 covers, RH & LH 2 central hinges 14 Euro screws, Ø6x12mm 12 Self-tapping screws Ø4x35mm Assembly instructions Note: Hinge 125° not included

1 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.4C

Overhead Solutions Download supporting documentation from the Titus Tekform website titustekform.com.au

3.4D

Gas Strut

Minimum internal cabinet height 264mm

606.8L03.300

•

Chrome

Item number

White

Dimensions (mm)

Silver

Overhead Solutions Lift Up Mechanisms

287

Gas Strut suitable for weights up to 12kg

1 Pce Lift Up Stay

606.8L03.287 •

000

Lift Up Overhead Stay with easy operation and variable opening angle of 75°. No concealed hinges required on top panel. Spring strength of 180N

1 Pair Flap Stay with Catch

225

605.8A20.225

Minimum door height 300mm Maximum door height 700mm Maximum door opening angle 105°

606.8L03.001

001

1 Pce Klok XL Flap Stay

•

000

Klok XL Flap Stay complete with carcase bracket and door bracket for wood

Details on how many flap stays are required depending on door height, weight and desired opening angle > see page 3.6 1 Set Download supporting documentation from the Titus Tekform website titustekform.com.au

3.5

Choosing the Correct Quantity of Klok XL Flap Stays To keep the door opening in any position, the number of Klok XL flap stays to use must be calculated according to the door weight, the door height and the maximum opening angle desired. Door weight and maximum opening angle

2kg

3kg

4kg

5kg

6kg

7kg

8kg

9kg

10kg

11kg

12kg

Door height (mm) 300

350

400

450

500

550

600

650

700

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

For additional technical information, please download the technical datasheet at titustekform.com.au

3.6

Overhead Solutions

Overhead Solutions Klok XL Flap Stay

Connectors Product Guide

Page

System 1 Fittings for rigid assembly systems

a highly cost-effective and rigid assembly system for factory, consumer and home assembly

3.10

two component rigid face and edge drilling fastening

3.12

a range of low-cost onepiece fittings for high volume home assembly applications

3.14

a comprehensive range of cam and dowel connecting fittings for all cabinet applications

3.17

face boring expanding connectors for all cabinet applications

3.33

System 3 Fittings for face and edge boring

System 4 Fittings for face-boring only

System 5 Cams and dowels

System 6 Quickfit-Expando connectors

3.7

Connectors

Why Choose Titus Connectors Titus connectors add value to furniture and to furniture manufacturing

Titus connectors improve the quality of furniture and lower the cost of manufacturing and assembly while ensuring a high degree of customer satisfaction.

The most advanced range of connectors available on the market

Precise and efficient product design. The broadest possible range of drilling tolerances ensures reliable assembly and consistently strong joints. Klix locking feature, the engagement of interlocking teeth on cam and dowel, to prevent joint loosening in service or transit. Expanding function provides degrees of variation in out-of-tolerance drillings ensuring stronger joints and improved quality of furniture. Twinstart thread for faster and more stable insertion. Depth stop collar prevents over-insertion. Firm tightening for greater confidence in use. Cam locks at 230° ensuring a smooth tightening action and greater dowel pull-up.

Quickfit for hand dowel insertion. Quickfit TL2, TL4 with the built-in self adjustment feature is the only available dowel that allows for pre-insertion. Quickloc one piece fitting for faster assembly with integrated expanding cam and dowel. Zinc+steel dowel for optimal strength and performance. Precise dowel manufacturing high precision of zinc and strength of steel assures 100% dimensional accuracy.

Easy and quick consumer friendly self-assembly of furniture

Self-assembly furniture offers consumers good value and instant availability of products.

Titus connectors provide consumers with easy assembly and furniture producers with increased productivity: reduced number of assembly parts easy assembly instructions security of packed parts during transit

With the aim of providing consumer with simpler instructions, fewer parts and an easier assembly process, Titus has significantly reduced and simplified the number of fittings traditionally required in furniture production.

• • •

3.8

Connectors Information

Easy and Quick Furniture Assembly CAF formula

CAF=Consumer Assembly Friendliness Titus CAF formula provides a comparative measure for customer satisfaction. By using it manufacturers are able to evaluate their products internally or against those of their competitors. While offering consumers easier and faster assembly, there are obvious advantages also for furniture manufacturers â&#x20AC;&#x201C; buying, counting, bagging and stocking of fittings can be greatly reduced.

How does it work?

3.9

Comparative CAF scores to assemble a hand held demonstrator

CAF

Connecting screw (traditional assembly)

126

Cam & dowel with single start thread

108

Cam & dowel with twinstart thread

Cam & TL2 dowel (self-assembly)

Cam & TL2 dowel (factory pre-inserted)

Quickloc

Fully assembled demonstrator

System Features Double locking carcase screw

• •

•

Zinc diecast for precision Titus Double locking carcase screw makes an almost invisible connection Collar under the head to pull panels together

•

• •

Hi-Lo™ carcase construction screw

The Hi-Lo™ carcase construction screw (CCS) offers a strong, tolerant and cost effective connection with minimal panel preparation. The combination effect of the elements of a Hi-Lo™ screw means A greater differential between drive torque and strip torque in fibrous and particle materials to ensure a reliable and repeatable fixing Hi-Lo™ threads provide minimum bursting forces •

•

Barrel nut (plastic)

• •

•

Cover caps

• • •

•

2nd ‘lower’ thread pulls against a ‘faster’ thread to provide maximum connection force and prevents overdriving of fastener Almost invisible in position Head can be ‘fastcapped’ or filled

‘ Hi’ thread gives low bursting component force from the sharp 30 degree angle thread ‘Lo’ thread at 60 degree angle uses the vertical force component to press fibrous and particle components of panels onto the ‘Hi’ thread and are contained by their greater height The very small shank on a Hi-Lo™ screw means less material displacement than conventional threads and enables minimum or partial drilling of pilot holes for quicker panel processing

Used with Titus Hi-Lo™ screws Titus barrel nuts provide maximum strip torque for reasonable drive torque Capable of multiple reconnection repeatability

Available in multiple colours All recess and head types offered High quality engineering polymers used in their construction Uniformity of holding with good tolerance Wide range of application and use conditions

3.10

Connectors

System 1 Fittings for Rigid Assembly Systems

Hi-Lo™ Screw

4 Ø3

1056

Ø5

POZIDRIV No.2 RECESS S 5-6 0066 6-8 0071 0077 11.5-13 12-14 0172

L 18-19 32-33 44-45.5 53.5-55

Item number

00071

852

00077

852

00172

852

06074

852

01056

835

877

9 min

Ø7.6 L

Ø5

Ø4

White

Technical and mounting details

Phosphate

Screw diameter

•

Black

•

Hi-Lo™ screws have a twin thread for faster insertion ‘Hi’ threads and ‘Lo’ threads combine to give excellent pull out in chipboard Funnel head design means no countersinking Steel is case hardened for extra strength

Drive type

•

Total length (mm)

•

Nominal adjustment

System 1 Fittings for Rigid Assembly Systems Hi-Lo™ Screw and Barrel Nut

Drive type

POZIDRIV No.2 RECESS

7000 47-48 4-5Pcs (00071) Ø7.9 4000 Pcs (00077, 06074) S 3000 Pcs (00172)

Cross Slot

Ø5

9 min

Made of steel

Barrel Nut

Other colours available on request Ø12x11 7.5/8 B B - nominal adjustment to suit application

10000 Pcs

Ø13 Made of plastic

Screw Cap

1.4 Ø3.3 Ø13

01020 1.4 Ø3.3

Pozi, Philips Drive

01020

835

877

Hexagonal Drive

01042

835

877

Other colours available on request

Ø13

01042 1.8 Ø3.5

Ø13 1.8

10000 Pcs (01042) 50000 Pcs (01020)

Ø3.5

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.11

System Features Titus System 3 is a two component rigid face and edge drilled fastening with half turn to fasten. System 3 offers almost full concealment and wide tolerances in use.

• •

•

• •

•

Automatic or in-factory placement Pre-location pin ensures ease of assembly Less than one turn of a screwdriver to fasten Shelf edge installation of pin means maximum shelf cut size tolerance Can be used on 12mm shelf panels No loose parts for maximum convenience in RTA Drawer front fixing, cabinet construction

3.12

Connectors

System 3 Fittings for Face and Edge Boring

System 3 Fittings for Face and Edge Boring Concealed Housing

•

• • •

One turn locking system reduces assembly time, both in the factory and home Pre-assembly feature for consumer convenience Choice of dowels to suit drilling Hi-Lo screw feature for faster insertion

Drilling depth

Drilling diameter for dowel thread

3180 POZIDRIVE

Drilling length for dowel

3168

Housing Assembly

H 12

Ø25 x D

Y X

(Y=9.5 MAX)

3118 3180 POZIDRIVE

X-Y+7

3121

Item number

12.5

03118

835

03121

835

03168

White

Technical and mounting details 3168

Yellow passivate

Zinc plated

H 3121 3180 3118 POZIDRIVE

Black

3168

877

Other colours on request

X, Y - depends on board thickness 3118

Ø25 x D Ø5 x 30

Screw Dowel Ø5

YY XX

X-Y+7 X-Y+7 X-Y+7

Ø25 x ØD2 D Ø5 x x30C

883

(Y=9.5 MAX) (Y=9.5 (Y=9.5 MAX) MAX)

Made of plastic and zinc XX

X-Y+7 X-Y+7

2500 Pcs

(Y=9.5 MAX) MAX) (Y=9.5

3121

Y X Y X

X-Y+7

ØD2 x C

3.75

03181

881

03180

881

03150

(Y=9.5 MAX)

Screw Dowel Ø3

Ø5 x 30

Made of steel

10000 Pcs

X-Y+7 X-Y+7

ØD2 x C

(Y=9.5 (Y=9.5 MAX)MAX)

X, Y - depends on board thickness

X, Y - depends on board thickness 5000 Pcs (03180) 40000 Pcs (03181)

Made of steel

Cover Cap Other colours on request

15000 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.13

835

877

System features Cost effective one piece fittings with face-boring benefits

• • • • •

•

Quickloc™ One-piece Connector

The integrated housing and dowel make Quickloc™ the most user-friendly and tolerant product available.

• • • •

Quickloc™ Assembly

1. Press Quickloc into the face board

Flush and block components Face-boring only Good tolerances One piece connectors Angledrive versions fastening with maximum driving power and flexibility Quickloc™ versions need only one turn to tighten for fast assembly Foolproof consumer home insertion

High degree of drilling tolerance Push-in design Tool-free insertion Integrated expanding housing and dowel provide consistently stronger joints

2. Assemble the panels

3. Tighten in less than one turn

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.14

Connectors

System 4 Fittings for Face-boring Only

System 4 Quickloc™ One Piece Expanding Connector

An innovative, one-piece connector, capable of hand insertion Is highly tolerant and tightens in less than one turn Is a face-bored product Offers a high degree of drilling tolerance and is the only connector of its type to provide pull-up of cabinet panels when tightened

•

• •

6803

Ø8

9.5 22

Ø20

22 4.5

6803

Quickloc Ø20 Flanged 4.5

9.5

9.5Technical and

Ø8

9.5

06803

831

835

877

06806

831

835

877

Ø20

6813

Ø8

mounting details

6803

Item number

Ø20

White

Ø8

Black

Ø8

9.5

Dark brown

6803

4.5 Ø19.6

Ø8

6806

10 9.5 11.5

Ø20

2500 Pcs

4.5 Ø19.6 10

Ø8

Quickloc Ø20 Flush 6806

11.5

Ø8

6806

Ø19.6

2500 Pcs 6.5

6839 Ø20

11.5

9.5

Ø8

A 1

6839

10.5

Ø10

A 1

06839

831

835

877

Made of zinc, plastic

9.5 1

877

Ø25 Ø10

6.5

Ø10

13 12

Made of zinc, plastic

12.2

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.15

835

Ø8 Ø10

9.5

Ø8

Quickloc Ø25 Flush

1500 Pcs

831

12.2

Ø25

6.5 11

Ø10

Ø20

06813 Ø20

Ø10

6.5

Ø8

6.5

Ø8

Made of zinc, plastic

Ø25 9.5

10.5

6.5

11.5

Ø10

12 Flanged Quickloc6806 Ø25

6813

Ø25

Other colours on request

Ø20

Ø19.6

9.5

1500 Pcs

Ø8

Made of zinc, plastic

Ø10

System 4 Fittings for Face-boring Only Minibloc™ / Twinbloc™

• • • •

One-piece connector range Face drilling only required Easy to use, foolproof home insertion Angledrive screw tolerates good levels of inaccurate drilling increasing consumer confidence

ASSEMBLY ASSEMBLY

14 14

21072107

Connectors

17 17

16 16

21202120

10.510.5

Ø10.5 Ø10.5 17 17 13 13

Minibloc Ø10

21302130

ASSEMBLY

1717 17

16 14 14 14

2107

thumped 00220022thumped Ø8.2

16 16

2141 2141 10.5 32

17 17 17

14 13 13 6 9.5 9.5 6

17 17

2130 2130 2130

Twinbloc Ø10

13 13 13 unthumped 0021 14 14 thumped 0022 66

Ø8.2 Ø8.2 Ø8.2 Ø10.5 Ø10.5

877

835

861

877

2144 2144

15.515.5

Ø5 xx13 Ø10 D Ø5 x 10.5 Ø8 xxDD Ø10 Ø10 Ø10 x 11

Ø6

14.5

Ø3 Ø3

2144 2144 2144 2139 2139

Ø10 11 Made of zinc, plastic

17 17 17

xx10.5 Ø510 13 278.4129Ø5 6x xD11 Ø10 Ø8 14 14 14 0021 0021 unthumped unthumped Ø10 Ø10 Ø6 Ø6 6 15.5 19thumped 21.5 0022 0022 thumped 14.5 14.5 12

32 32 32

861

02141

17 17

10.5 10.5 10.5

9.5

10.5 10.5 10.5

835

2120 2120 2120 2139 Other colours on request

11 11 11

17 17 17

32 32

3000 Pcs

877

2120 2120

Ø10 Ø10

Ø10 x D Ø8 x 13 Ø10 x D Ø8 x D

10 10 10.5 278.4129 278.4129 10.5 10.5 12 12 6 6 10.5 10.5

16 16 16

10.5 10.5

861

14.514.5

Ø8.2 Ø8.2

2141 2141 2141

835

Other colours on request

Ø6 Ø6

19 21.521.5 Ø10.5 Ø10.5 Ø10.519 Ø10.5 2130 2130

831

14 14 14

2107 2107 2107

877

ASSEMBLY ASSEMBLY Made of zinc, plastic11ASSEMBLY

16 16 16

Minibloc Ø8

861

2144

Ø10 Ø10

10.5 10.5

Ø10.5 Ø10.5

2130

835

ASSEMBLY ASSEMBLY

Ø5 x 10.5 Ø10 x D

17 17

14 14 6 2107 2107 00210021unthumped unthumped 10.5

2500 Pcs (02107) 3000 Pcs (02120)

831

*assembly with screw 11

16 16 16

02107

2120

32 32 Ø10.5 Ø10.5 Ø10.5

2141

112139*02120 > 2139

10.5

10.510.5

Item number

White

Technical and mounting details

Ø8.2Ø8.2

Silver

10.510.5

Black

21442144

Dark brown

21412141

Drilling depth

16 16

02130

2139 2139 2139 11

*02139

Ø3

835

877

*assembly with screw Ø10.5 Ø10.5 Ø10.5

11 Ø10 Ø10

Other colours on request

9.5 9.5

Ø5 x 10.5 10 10 278.4129 Ø10 x 11 278.4129 12 12 66 6 0021 unthumped 0021 0021 unthumped unthumped Ø10Ø10 Ø10 19 19 21.5 21.5 thumped 0022 thumped

0022 0022

thumped

Ø6 Ø6 Ø6 15.5 15.5

Ø3 Ø3

14.5 14.5 14.5

Ø10Ø10 Ø10

1000 Pcs Download supporting

Made of zinc, plastic 9.59.5 9.5 10 278.412910 10 278.4129 12 12 12 278.4129 6 6 6 Ø3 Ø3 Ø3 15.5 15.5 documentation from the Titus Tekform website titustekform.com.au 15.5 19 21.5 19 19 21.5 21.5

3.16

System 5 Cams and Dowels

System Features The most advanced cam and dowel range

Titus System 5 is a comprehensive range of cam and dowel connecting fittings with Klix and Quickfit features for all cabinet applications: panel-to-panel, panel-to-hollow profile, back-to-back

•

Dowels • •

Titus Klix™

uickfit TL2, TL4 dowels Q a unique solution for factory pre-insertion, high level of drilling tolerances

Titus Klix locking system ensures the engagement of the interlocking teeth on cam and dowel providing: vibration-proof joint rigid construction that will not loosen in service or transit • •

Dowel insertion time comparison Quickfit dowel 1 Second

2 o'clock lock smooth closing

3.17

Twin start thread Combi dowel 4 Seconds

Single start thread Standard dowel 7 Seconds

Linear cam profile assures smooth, firm tightening action and greater pull-up. The cam always locks at 2 o'clock lock (230°), enabling greater consumer confidence in use while improving furniture quality.

Quickfit dowels quick hand insertion, easy assembly Diecast dowels (zinc) precise manufacturing, optimal shape and design Turned dowels (steel) ‘traditional’ design, smooth surface, best strength performance Combi dowels (zinc and steel) high precision of zinc, strength of steel, 100% dimensional accuracy and optimal performance

leranza

System 5 Cams and Dowels

min.23(27/33) ETHC

Connectors

max.25(29/35) ETHC

Tolerance range

Optimal performance and perfect joint Intervallo di tolleranza even with inaccurate drillings.

Drilling tolerances

Typical ETHC (EDGE TO HOLE CENTRE) measurements

Zinc/Combi dowel

±1 mm

+/-0.5mm

min.23.5 (33.5) ETHC

max.24.5(34.5) ETHC

Tolerance range

Number of Occurences

20 18 16

max.25

+ / - 0.5 mmETHC

12 10 8 6 4 2

Tolerance range Intervallo di tolleranza

0 Series1

Tolerance range Intervallo di tolleranza

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

Tolerance range Intervallo di tolleranza

Number of Occurences

+/-1mm

Quickfit TL2/TL3

Typical ETHC (EDGE TO HOLE CENTRE) measurements

20 min.23(27/33) 18 ETHC

measurements

14 max.25(29/35) 12 ETHC

min.23(27/33) ETHC

+ / - 0.5 mm

10 8 6 4

Tolerance range Tolerance range

2 0

Intervallo di tolleranza

18 16 14

+ / - 1 mm

12 10 8 6 4 2

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

Series1

Number of Occurences

Quickfit TL2 dowel

max.25(29/35) ETHC

0 Series1

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

Quickfit TL2/TL3

Typical ETHC (EDGE TO HOLE CENTRE) measurements

Quickfit TL4 dowel

min.23.5 (33.5) + / - 0.5 mm ETHC

12 10

+/-1mm

max.24.5(34.5) ETHC

8 6 4 2 0

Series1

18 16

14 max.25 ETHC 12 10

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

max.25 ETHC

min.23.5 (33.5) ETHC

8 6 4

0 Series1

23,0

23,1

23,2

23,3

Tolerance range Tolerance range Intervallo di tolleranza

18 16 14

±1 mm

+ / - 1 mm

min.23 ETHC

8 6 4 2

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC=Edge To Hole Center ETHC

Tolerance range Intervallo di tolleranza

Dowels for factory insertion

min.23 ETHC

+ / - 1 mm

2 23,0

measurements

±1 mm

Number of Occurences

Quickfit TL2/TL4

+/-1mm

measurements

Number of Occurences

ETHC

0 Series1

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

Tolerance range Intervallo di tolleranza

ETHC

Quickfit TL2 and Quickfit TL4 are the only available dowels that allow for factory pre-insertion • • •

Easier packing Less damages in handling Perfect for the RTA market

3.18

System 5 Cams and Dowels

Zinc+steel Combi Dowels Zinc+steel technology for optimal strength and performance

The Combi dowel combines steel and a small amount of zinc to ensure high precision and dimensional accuracy, essential to provide furniture manufacturers with the broadest possible range of drilling tolerances.

toroidal head form steel neck and head zinc body

positive stop collar

twinstart thread

The steel neck and head provide better resistance to torsion and pullout enabling a high performance joint

Cam

small bursting angle

Zinc body: Positive stop collar ensures correct insertion depth Twinstart for faster and more stable insertion

The toroidal dowel head form transfers the forces between cam and dowel more effectively resulting in a small cam bursting force.

Dowel

100% dimensional accuracy assured

3.19

rat

Quickfit Connectors

Assembly

It is the fastest assembly system on the market. The Quickfit™ dowel may be inserted by hand, using only finger pressure. This eliminates the labour intensive process of screwin assembly and the potential panel damage.

The Quickfit™ range of dowels has been extended to provide a complete family of fittings available in diameters of 5mm, 8mm and 10mm and lengths of 24mm and 34mm. These dowels are compatible with the range of Titus Ø15mm cams.

1. Press the cam into face board

2. Insert the dowel into side panel

3. Assemble the panels

4. Tighten the cam to lock dowel

5. Assembled panels

3.20

Connectors

System 5 Cams and Dowels

Quickfit TL Connectors Quickfit-TL™ dowel offers furniture manufacturers a fast assembly system providing high drilling tolerances. It has a built-in self-adjustment feature, which enables common drilling inaccuracies to be overcome.

For the self-assembly furniture consumer, Titus Quickfit-TL™ is the most consumer friendly fitting on the market. Apart from the benefit of fully tightened joints and easy locking into the same position, Quickfit-TL™ provides an exceptionally smooth action when tightened, requiring very little effort.

Drilling tolerances

Marginal inconsistencies of drilling and the problems associated with the natural movement of wood panels, no longer present problems.

Quickfit-TL™ provides a tolerance of +1/-1mm on drilling operation while ensuring that the final result is a perfectly precise and aligned joint. No other assembly fittings system can offer such tolerances and still maintain a perfect joint.

Assembly

1. Press the cam into face board

3.21

2a. Either push dowel into edge hole or...

2b. Insert the dowel into side panel

3. Assemble the panels

4. T ighten cam to lock dowel

Technical and mounting details

Quickfit-TL2 ØD2 x 12 Ø8

±1 mm

TL3

D2=Ø5mm

min.23 (27/33) ETHC

max. 25 (29/35) ETHC

TL2

D2=Ø8mm

Edge to hole tolerance

Ø8 x 12

max. 25 (29/35) ETHC

ØD2 x 12 Ø8

Connectors

•

Item number

05453

880

05503

880

05441

880

05314

880

05474

880

02144

Dark grey

•

Black

•

Available in Ø5mm and Ø8mm for panel-to-panel applications Suitable for use with all Ø15mm Cam2000 and Cam3000 products ‘Klix’ locking feature provides a strong, vibration proof joint Highly tolerant in edge-inserted, TL4 also in faceinserted applications

Drilling diameter for dowel thread

•

Drilling depth

System 5 Cams and Dowels Quickfit-TL Dowels

min.23 (27/33) ETHC

Ø8

Tolerance range

2000 Pcs 10000 Pcs (05474)

Made of zinc, plastic

Quickfit-TL4

835

Ø8 x 12

Ø8

Hole to hole tolerance ±1 mm

TL3 Edge to hole tolerance

min.23 (27/33) ETHC

max. 25 (29/35) ETHC

Tolerance range 2000 Pcs

TL2

max. 25 (29/35) ETHC

Made of zinc, plastic

min.23 (27/33) ETHC

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.22

System 5 Cams and Dowels Quickfit-P2F Dowels

•

The only product to enable standard panel drilling and connection of panel and hollow profile Available in Ø8mm for panel-to-hollow profile applications Suitable for use with all Ø15mm Cam2000 and Cam3000 products ‘Klix’ locking feature provides a strong, vibration proof joint

Quickfit - P2F

Ø7.8

Ø8 10

SYS05414/app

Ø8 x thru Ø8

2000 Pcs

1.0 - 1.5 approx.

Made of zinc, plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.23

Item number

Black

Technical and mounting details

Drilling distance

05414

835

•

Thread length

09435

885

Ø3.5

9.5

09588

885

09443

885

8.5

09583

885

09592

885

10.5

09594

885

Zinc

Drilling depth

Ø3.5 Ø6

Ø5.8

Item number

Technical and mounting details

Combi Dowel Ø5mm

Drilling distance

•

High quality zinc-steel dowel with greater resistance to torsion and pull-out Suitable for use with all Ø12mm and Ø15mm Cam2000 and Cam3000 products ‘Klix’ locking feature provides a strong, vibration proof joint Twinstart thread for faster and reliable insertion

Connectors

System 5 Cams and Dowels Combi Dowel

Ø5 Ø7-8

Made of steel and zinc

Combi Dowel M6

Ø3.5 M6

1000 Pcs

Ø5.8 X

Ø7-8

1000 Pcs Inserts Made of zinc

M6 insert to suit

Made of steel and zinc > see page 3.43

Inserts Made of plastic

> see page 3.44

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.24

System 5 Cams and Dowels Zinc Dowel

Ø5.8

Item number

20.6

34.5

09597

Zinc

PZ2 Head

Drilling distance (mm)

Zinc Dowel Ø5 Full Body

Total length

Technical and mounting details

Body length

885

09430

885

Ø6 Ø3.5 S

10.5 L

Ø5 Ø7-8

2000 Pcs

Made of steel and zinc

Combi Dowel Ø7

Philips PH2 Head Ø3.5

Ø4.7

Ø5.8

Ø8.4 9.6

Ø7

Ø6 min.

1000 Pcs Inserts Made of plastic

Made of steel and zinc > see page 3.44

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.25

•

• •

Available in Ø7mm Suitable for use with all Ø12mm and Ø15mm Cam2000 and Cam3000 products No circlip for increased tolerance Available in a variety of lengths to suit most panel-topanel applications

Ø7

Ø3.6

Ø6 S L

Ø7 Ø7-8

Ø3.6

Panel thickness

Dowel without Circlip

Drilling distance

Technical and mounting details

Total length

Body length

Connectors

•

Item number

47.4

05929

883

67.4

05757

883

83.4

05858

883

85.4

05859

883

86.4

05753

883

62.4

05592

883

63.4

05857

883

65.4

05380

883

66.4

05778

883

Zinc plated

System 5 Cams and Dowels Double-ended Dowel

Ø6 S A

L B

250 Pcs (05753) 500 Pcs 1000 Pcs (05929, 05857)

Ø12

Ø7

Ø3.6

*B=0 > no panel required Ø6

Made of steelS L

Dowel with Circlip Ø12

Ø7

Ø3.6

Ø6 S L

83.4

05752

883

85.4

05772

883

86.4

05751

883

63.4

05775

883

66.4

05774

883

Ø7-8

A B

250 Pcs 500 Pcs (05775, 05774)

Made of steel and zinc

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.26

• •

•

Suitable for applications requiring angled joints Suitable for use with all Ø12mm and Ø15mm Cam2000 and Cam3000 products Adjustable angle from 90° to 180°

Technical and mounting details

Angled Dowel

Ø7-8

Ø15

B/2 44 x

Distance x in mm 20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 67,5° 70° 75° 80° 85° 13 61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47 46.7 46.4 45.7 45.1 44.6

15 64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7 46 45.3 44.7

16 66 61.2 57.9 55.4 53.5 52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7 B

18 68.8 63.3 59.6 56.9 54.7 53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8

19 70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8

22 74.2 67.6 63.1 59.7 57.1 55 53.2 51.7 50.4 49.1 48.6 48 46.9 45.9 45

23 75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1 46

250 Pcs

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.27

Item number

Zinc plated

System 5 Cams and Dowels Angled Dowels

05880

883

•

Its optimised shape provides a more efficient cam profile with smooth tightening action and greater dowel pull-up Suitable for use with Combi dowels, forged steel dowels, Quickfit dowels and Quickfit TL2 dowels ‘Klix’ locking feature provides a strong, vibration proof joint Cam-retaining pips ensure that a cam is held in panel position prior to assembly

Cam height

PZ2 Drive

9537

9533

Drilling for dowel

Cam3000 Cross Drive

Item number

12/13 9533

10.5

6 min

9.9

09495

885

15/16

12.5

7.5-8

11.9

09533

885

Panel thickness

Technical and mounting details

Drilling depth

9537

Connectors

•

Ø15

Black available upon request

Ø15

5587 5563 5644

Ø15xD

e Ø15

5654 5656 5657 5676 5678 5679

1000 Pcs

Zinc

System 5 Cams and Dowels Ø15mm Cam3000

9.9 10.4

11.9

6 6 7.5

10.5 12

12 15

9.9 10.4

6 6 7.5

10.5 12

18 22

6 6 7.5

10.5 12

28/ 2

9.9 10.4

11.9

6 6 7.5

10.5 12

12/ 15/

9.9 10.4

6 6 7.5

10.5 12

18/ 22/

6 6 7.5

25/

10.5 12

28/ 2

11.9 9.9 10.4 11.9

Made of zinc

Cam3000 Hexagonal Drive 9537

Combined Drive with HEX

9537 15/16

18/19 e

12.5

7.5-8

11.9

09537

885

9-9.5

13.2

09536

885

Use standard cover caps with pin=Ø4mm

9533

Ø15upon request Black available

9533

Ø15 5587 5563 5644

Ø15xD

e Ø15

5654 5656 5657 5676 5678 5679

1000 Pcs

11.9 9.9 10.4 11.9

Made of zinc

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.28

System 5 Cams and Dowels Zinc Dowel

Ø5.8

Item number

20.6

34.5

09597

Zinc

PZ2 Head

Drilling distance

Zinc Dowel Ø5 Full Body

Total length

Technical and mounting details

Body length

885

09430

885

Ø6 Ø3.5 S

10.5 L

Ø5 Ø7-8

2000 Pcs

Made of steel and zinc

Combi Dowel Ø7

Philips PH2 Head Ø3.5

Ø4.7

Ø5.8

Ø8.4 9.6

Ø7

Ø6 min.

1000 Pcs Inserts Made of plastic

Made of steel and zinc > see page 3.44

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.29

Technical and mounting details

Cam3000 S/15

PZ2 Drive

15/18

12.5

Connectors

Item number

Zinc corrosil

•

Zinc

•

Drilling for dowel

•

Innovative design offers optimal performance with maximum cost effectiveness Suitable for use with Combi dowels, forged steel dowels and Quickfit dowels ‘Klix’ locking feature provides a strong, vibration proof joint Cam-retaining pips ensure that a cam is held in panel position prior to assembly

Drilling depth

•

Panel thickness

System 5 Cams and Dowels Ø15mm Cam3000 S

7.5-8

09491

885

897

11.9

11.9 Ø15

9.9 10.4 11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

10.5 12

6 6 7.5

10.5 12

Ø15

5587 5563 5644

Ø15xD

e Ø15

5654 5656 5657 5676 5678 5679

1000 Pcs

11.9 9.9 10.4 11.9

Made of zinc Cover Caps Made of plastic

> see page 3.44

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.30

•

Ø15xD

Cam2000 Ø15

5587

9.9 10.4

6 6 7.5

12/13

5563 5644

10.5 12

12/13 15/16

Ø15

11.9

5654 5656 5657

6 6 7.5

15/16

10.5 12

6 6 7.5

25/26

10.5 12

28/29 29

11.9 9.9 10.4

5676

Ø15xD

H 9.9 10.4

5678 5679

11.9

1 mm Ø15

18/19 Ø15

Ø15

e Ø15xD e

5587 5563 5644

9.9 10.4 11.9

6 6 7.5

5676

5587 5563 5644

12/135587 12/135644 5654 15/165656 5676 5654 5678 5656 5679 5657

5563

5657

Ø15

9.9 10.4

6 6 7.5

5676

5654 5656 5657 5676 5678 5679

11.9 9.9 10.4 11.9

6 6 7.5

5678

15/16 5679

10.5 12

18/19 22/23

25/26

10.5 12 B

12.5 14 D

D 6-6.5

16 19

12 12.7 7.5

9.9 10.4

6 6 7.5

12/13Item number

10.5 12/13 Ø17 12 15/16 05587* > 6-6.5 847

22/23

25/26

10.5 12

28/29 29

Ø15

7.5-8

05653

Ø15

9-9.5

11.9 18/19

22/23

11-11.5

5656 056575657 >

25/26

17.9

12.5-13

056765678 >

28/29

19.4

14-15.5

05678

05656 5654 > 5676

5679

847 9.9

5586

9.9 10.4

11.9 10.9

5652

12.4

5658 5659

885

88510

6 e6 6.5 7.5

D 11

8 9.5

12.5 14

17.4

11.5 13

17.5

9.9 847 10.4 11.9 847 9.9 10.4

847

11.9

13.9

847 H15.9

5675

9.9 10.4 H 11.9

6 6 e 7.5

12/13

10.5 D 12

12/13 B 15/16

9.9 10.4H 11.9 9.9 10.4 H 11.9 9.9 9.9 10.4 10.4

11.9 11.9 9.9 10.4 11.9

6 6e 7.5 6 6 e 7.5

10 10.5D 12 10

12/13 B 12/13

10.5 D 12

18/19 B 22/23

66 66 7.5 7.5

10 10 10.5 10.5 12 12

25/26 15/16 28/29 18/19 29 22/23

6 6 7.5

25/26

10.5 12

28/29

Ø17

1 mm

5586

Ø17

5586 5652

Ø15

5658 5659

1 mm

5675 5652

Ø15

9.9

H 1 mm

Ø1715/16 15/16

Ø15 29

5586

5677 5658 5659 5675

5652 5677

16 5658 5659 5675 19

5677

H 9.9 10.9 12.4 H 13.9 15.9 10.9 17.4 12.4 13.9 15.9 17.4

10 min 10 12 6

9.96.5

e 6

D 10 11

8 e 9.5

12.5 D 14

16 11 10.9 17.5 12.5 min14

11.5 6.5

H138 9.5

11.5 13

B B 12 13

05586*

10 10.5B 1213

5652 B 5658 5659 12/13 5675

12/13 5677 15/16

16 19

885 e 16

23 D

15/16

10.5 6 7.5 885 12 10 6

18/19 22/23

6 885 10.5 12 7.5

28/29 29

6 885

847

885

847

885

25/26

16 B 19 23 13

26 e 16 19

10.9 17.5 6.526 12.412.9 8 9.5 13.9 15.913 11.5 17.4 13

6.5 D 11

8 12.5 14

16 9.5

17.5

05652

847

885

16 19

05658

847

885

05659

B 13

5587

28/29 Ø15xD 29

14.5

11.5

5563 05675 >

16.5

05677

19.4Ø15

14.5

056795654>

5644

5676 5678 5679

> see page 3.45

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.31

Ø15 H

5677

5656 5657

Cover Caps for Ø15 Cams Made of plastic

847

18/19 05644 > Ø17 5587 22/23 5563 25/26 1 mm 5644 28/29

05654

885

1 mm

15/16

5586

Made of zinc

10.5 12

Other finishes on request *Ultraflat - specially designed for thin panels (does not work with TL dowels)

Ø15

13.9H 15.9 9.9 17.4

15/16 11.9

500 Pcs (05676, 05678) 1000 Pcs Ø15xD

6 6B min 10 7.512 D

10.911

6.5 8 9.5 e

5657 5678 5679

Cam2000 Ø15 Headed H e

12.4

9.9 623 B 10 16 11.5 6 17.5 106 26 12/1310.5 5587 5677 15/16 12.7 7.5-8 10.413 5656 10.4 10.5 12/13 6 5563 7.5 15/16 12 5657 12 11.911.9 7.5 5644 9.9 e 6 B 10 5676 D H 10.4 6 15/1610.5 5678 10 9.9 6 5654 10.4 10.5 7.5 18/19 12 11.9 6 5679 5656 5654 5675

22/23

12/13 10.9 5652 5658 5659

Ø15xD

9.9 5587 H 10.4e 5563 5644 12/13 9.9 11.910 6 5586

Ø17

Drilling depth

Technical and mounting details Ø15xD

Panel thickness

Zinc

•

Available in a variety of head, drive recess and board thickness versions to suit most applications Suitable for use with all Titus dowels “Klix” locking feature provides a strong, vibration proof joint Linear cam profile results in smooth, easy cam rotation and dowel pull-up

Nickel

•

Drilling for dowel

System 5 Cams and Dowels Ø15mm Cam2000

847

9.9 10.4847

11.9

847

9.9847 10.4 11.9 9.9 10.4 11.9

885

10 6 6 885 10.5 12 7.5

885

B 12/13 12/13 15/16 B

6885 10 10.5 6 12 7.5 10 6

18/19 22/23

10.5 12

28/29 29

6 7.5

15/16

25/26

•

5563 5644

Ø15xD

Technical and mounting details

Ø15

Cam2000 Ø12

5654

9.9 10.4

6 6 7.5

12/13

10.5 12

12/13 15/16

11.9 H 9.9 10.4

12/13 11.9

5656 5657 5676 5678 5679

Ø14 1 mm Ø12

Ø12

9.9 10.4 11.9

6 10 min 12 7.5 6 6 7.5

Drilling for dowel

5587

Drilling depth

Panel thickness

Connectors

•

15/16

6-6.5

10.5

18/19 22/23

25/26

10.5 12

28/29 29

15/16

18/19

13 min

Ø17 1 mm

Item number Ø15

05575

5586

9.9

5652

10.9 12.4

6.5 8 9.5

5658 5659

838 5675 5677

13.9 15.9 17.4

12.5 14

16 19

17.5

84711.5 885 16 13

7.5-8

05578

885

9-9.5

05580

885

Corrosil zinc

•

Suitable for all Titus screw-in dowels Available in a variety of head, drive recess and board thickness versions to suit most applications Particularly suited to drawer front attachment applications ‘Klix’ locking feature provides a strong, vibration proof joint Linear cam profile results in smooth, easy cam rotation and dowel pull-up

Zinc

•

Nickel plated

•

Black painting plate

System 5 Cams and Dowels Ø12mm Cam2000

897

Other finishes available on request

Ø12 x D e

5587 5563 5644

Ø15xD

2000 Pcs

Made of zinc Ø15

Cam2000 Ø12 Headed

5654

5656 5657 5676

Ø14 1 mm

5678 5679

12 16

Ø12

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

9.9 10.4 11.9 9.9 10.4 11.9

15/16

10.5

18/19

25/26

10.5 12

28/29 29

10 min 12.5

9.9

5652

10.9 12.4

6.5 8 9.5

12.5 14

16 19

17.5

1 mm

6 9.5 min 12 22/235.25 7.5 6 6 7.5

Ø17

H 5586

Ø15

05574

5658 5659

838 5675 5677

13.9 15.9 17.4

84711.5 885 16

05576

885

05579

885

897

Ø12

Other finishes available on request

Ø12 x D

1000 Pcs 2000 Pcs (05576) Cover Caps for Ø12 Cams Made of plastic

Made of zinc > see page 3.45

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.32

System 6 Quickfit-Expando Connectors

System Features A face boring connector family for 32mm system drilling with full range of panel and application variants for all cabinet manufacturing applications • •

•

drop on

Applications

Side-entry Drop-on

side entry

• •

Minimum drilling requirements Linear cam design for constant tightening loads when driving Angledrive feature on cam for maximum driving comfort Interchangeable pins for wood, plastic and steel applications Pins with twinstart drive for fast insertion Interchangeable Quickfit pin fastenings available Toolless fastening capable versions Back-to-back fastenings for common vertical panel fixing of shelves

System 6 consists of a range of 20mm and 25mm diameter housings, Quickfit™ and conventional dowels, end dowels and double ended dowels. Housings are made from high grade plastic or zinc, with zinc cams. Wedgefix-6 connector is a special fastener without cam, simply to snap onto a pre-inserted dowel.

Titus System 6 is ideal for use in high volume production of case goods, closet and garage storage systems. Because no edge boring is required,

It is an excellent choice for manufacturing environments with limited drilling capacity.

Side-entry insertion of shelf panel: from the side or from the topdrop on

Drop-on insertion of shelf panel: only from the top Using drop-on connections allows for one-man installation

side entry

Angledrive feature

3.33

The angledrive feature on the cam allows for the angled position of the screwdriver with the locking action creating a tight and secure joint.

Connectors

System 6 Quickfit-Expando Connectors

System Features Outrigger/ Non outrigger

Outrigger

Expando function

Expanding housings and dowels provide a tight joint.

Assembly

1. Press the housing into face board

2. Press the dowel into side panel

3. Assemble the panels

4. Tighten the joint

Non outrigger

3.34

System 6 Quickfit-Expando Expanding Dowels

•

vailable in Ø5mm, Ø8mm and Ø10mm for panelA to-panel, panel-to-hollow profile and back-to-back applications Suitable for applications with all Titus Ø20 and/or Ø25mm Expando-6 housings ‘Klix’ locking feature provides a strong, vibration proof connection Depth stop collar for accurate insertion

Dowel

D2= Ø5mm

06408

880

06410

880

06479

880

ØD2 x 12.5

D2= Ø8mm

Ø8 x 12.5

5000 Pcs

Made of zinc, plastic Ø5 x 7.5

Dowel Ø5 x 7.5 Back-to-back Applications Ø5 x 7.5

Ø10 x 12.5

5000 Pcs

Made of zinc, plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.35

Black

Item number

Dark grey

Technical and mounting details

Drilling diameter for dowel thread

•

vailable in various Ø3mm and/or Ø5mm thread forms A for screw-in, knock-in and/or ‘spiked’ hole applications Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings ‘Klix’ locking feature provides a strong, vibration proof connection Dowels feature an integral skirt which acts as a positive stop during insertion

Connectors

System 6 Quickfit-Expando Dowels

Ø5xC

Ø5x8

Dowel Ø5 Ø5xC Ø5x8 Ø5x8

Item number

06401

885

06402

885

883

11.5

06406

885

883

06403

885

06405

883

06495

883

Zinc plated

Technical and mounting details

Zinc

Ø5xC

Drilling depth for dowel thread

Ø5xC

Ø5x12

2000 Pcs

Made of zinc or steel

Dowel Ø5 x 11 Knock-in

Ø5x8 Ø5x12 Ø5x12 hole to suit M4 insert

2000 Pcs

Made of zinc hole to suit M4 insert Ø5x12

Dowel M4 x 7

hole to suit M4 insert Ø5x11.5

Ø5x11.5 hole to suit M4 insert

4500 Pcs

Made of steel

Dowel Ø3 x 11.5

Ø5x11.5 Ø3 max

Ø3 max Ø5x11.5 Ø3 max

12500 Pcs Inserts Made of plastic

Made of steel > see page 3.44

Ø3 max Download supporting documentation from the Titus Tekform website titustekform.com.au

3.36

System 6 Quickfit-Expando Double-ended Dowels

• •

•

For 16mm, 18mm and 19mm board Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings ‘Klix’ locking feature provides a strong, vibration proof connection

Technical and mounting details

Double-ended Dowel

Ø4.8

Ø5.8

B Ø5 x thru

2500 Pcs

Made of zinc

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.37

Item number

Zinc

Ø9.5

Ø4.8

Panel thickness

1.5

06414

885

06413

885

06416

885

• •

•

Available in 15mm/16mm and 18mm/19mm versions for drop-on and/or side-entry applications Available in all-metal or plastic/metal options ‘Klix’ locking feature provides a strong vibration proof connection Compatible with all screw-in and Quickfit-6 dowels

Side-entry Ø20 x D side entry

drop on

2500 Pcs

500 Pcs

18/19

06453

847

15/16

12.5

06435

831

861

877

9.5

18/19

06437

831

861

877

Made of plastic

15/16

12.5

06447

847

9.5

18/19

06449

847

15/16

12.5

06431

831

861

877

9.5

18/19

06433

831

861

877

e 9.5

Made of zinc

Drop-on Ø20 x D

side entry

9.5

22 H

847

Ø20 x D

drop on

Other colours on request

Drop-on

side entry

06451

Made of zinc

22 H

12.5

9.5

Ø20 x D

drop on

15/16

Side-entry

side entry

22 H

500 Pcs

Item number

White plastic

Technical and mounting details

Silver plastic

Nickel plated

Drilling depth

Panel thickness

drop on

Drilling for dowel

Connectors

•

Dark brown plastic

System 6 Quickfit-Expando 20mm Expanding Housing Non-outrigger

Other colours on request e 9.5

2500 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.38

• •

•

Side-entry

06459

847

9.5

18/19

06461

847

15/16

12.5

06443

9.5

18/19

06445

Nickel plated

12.5

Black plastic

15/16

9.5

Made of zinc

Side-entry

e 32

500 Pcs

Item number

E 22

Ø10 x 10.5 Ø20 x D

Drilling depth

Technical and mounting details

Panel thickness

Drilling for dowel

White plastic

•

Dark brown plastic

System 6 Quickfit-Expando 20mm Expanding Housing Outrigger

E 22

Ø10 x 10.5 Ø20 x D

831

835

877

835

877

Other colours on request B

e 32

1250 Pcs

Made of plastic

Drop-on

9.5

E 22

Ø10 x 10.5 Ø20 x D

12.5

06455

847

9.5

18/19

06457

847

15/16

12.5

06439

831

835

877

9.5

18/19

06441

831

835

877

9.5

Made of zinc

Drop-on

15/16

e 32

500 Pcs

E 22

Ø10 x 10.5 Ø20 x D

Other colours on request B

e 32

1250 Pcs

9.5

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.39

•

• •

•

For Use with Screw-in Dowels

Ø20 x D

06470

877

15/16

12.5

06473

877

835

831

861

9.5

18/19

06465

877

835

831

861

06464

Silver

Dark brown

Black

Item number

White

Drilling depth

Technical and mounting details

Panel thickness

Drilling for dowel

Available in 12mm, 15mm/16mm and/or 18mm/19mm versions for Quickfit-6 and/or Standard Dowel applications Available in a variety of plastic colours Wedgefix-6 housing allows easy customer handassembly or factory automated insertion When used with Quickfit-6 dowels this provides a true toolless fastening system

Connectors

System 6 Quickfit-Expando Expanding Wedgefix housing (no inner cam)

861

Other colours on request

e 9.5

2500 Pcs

Made of plastic

For Use with Quickfit Dowels

15/16

12.5

06471

877

835

831

861

9.5

18/19

06472

877

835

831

861

Other colours on request

Ø20 x D

e 9.5

2500 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.40

System 6 20mm Knock-in Housing Non-outrigger

•

• •

•

vailable in 15mm/16mm and 18mm/19mm versions for A drop-on and/or side-entry applications Available in all-metal or plastic/metal options ‘Klix’ locking feature provides a strong vibration proof connection Compatible with all screw-in and Quickfit-6 dowels

drop on

White plastic

Item number

Silver plastic

side entry

Drilling depth

Side-entry

Panel thickness

Technical and mounting details

Drilling for dowel

15/16

12.5

06381

861

877

9.5

18/19

06385

861

877

15/16

12.5

06383

861

877

9.5

18/19

06387

861

877

Ø20 x D

e 9.5

2500 Pcs

Made of plastic

Drop-on drop on

Ø20 x D

side entry

9.5 H

2500 Pcs

Made of plastic

Cover cap 06463 Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.41

System 7 High Strength Connectors Contract Fix™ System

• • •

M6 Dowel 7x34

Item number

05971

883

05960

885

05917

885

Zinc

Technical and mounting details

Zinc plated

Connectors

•

High performance fastener Thread design gives repeatability Multi-drive recess Higher than average pull up

Ø7-8 7.5/9 34 Ø7-8

1000 Pcs

Ø15x12.5/14 Made of

steel

7.5/9

Housing Cylinder 15x12

Ø15x12.5/14

Ø7-8

1000 Pcs

Made of zinc

7.5/9

Grub Screw

Ø15x12.5/14

2500 Pcs Inserts Made of zinc

Made of zinc > see page 3.43

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.42

•

• • •

Available in both zinc and plastic for use in various applications Suitable for use with various threaded dowels Suitable for use with various panel thicknesses Knock-in and screw-in versions available

Technical and mounting details

Raw

Accessories for Connectors Inserts

Item number

Ø8 x 9

408-3166

600

408-3391

600

408-3423

600

408-3424

600

Ø8

M6 9

500 Pcs

Made of zinc

Ø9 x 13

M6M6 Ø9

002175

Ø9.5

13 13

1000 Pcs

Made of zinc

Ø9.5 x 18

Ø9.5

1000 Pcs

Made of zinc

Ø12 x 15

Ø12

1000 Pcs

Made of zinc

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.43

Connectors

Accessories for Connectors Inserts

Ø10

Ø10 x 13/M6 Nut 13

Ø10 M6

M6 M6

Ø10

Ø10 10

200

276-4036

200

13 Ø8

Ø10 M4

2172

single-start Euro thread

2182

twin-start Euro thread M4

50000 Pcs

Ø10

2182Euro thread twin-start Euro thread twin-start

Made of plastic

Ø8

Ø10

Ø8

Twinstart Thread 10

Ø10

02182

346

12 2172 Eurosingle-start Euro thread single-start thread

Ø8

2182 twin-start Euro thread twin-start Euro thread

2172

Ø10

2172Euro thread single-start Euro thread single-start

2182

Ø8

Ø10

10000 Pcs

Ø10

2182

275-4058

Made of plastic Ø8Ø10 M4

2172 Euro Thread

Ø8 x 10/M4 Nut

twin-start Euro thread

200

Ø10

single-start Euro thread

Ø10

2172

275-4035

275-4058

2182

275-4035 Ø10

20000 Pcs (275-4035) 30000 Pcs (275-4058)

Item number

Natural

Technical and mounting details

Natural white

Drilling length for insert

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.44

Accessories for Connectors Cover Caps

• •

Available in a variety of colours Suitable for use with both pozi and hex cam drive features Suitable for use with various diameter cams Both domed and flat versions available

2.5

277-4355

Light grey

Ø17

Light brown

Cover Cap Ø17

Item number

Black

Technical and mounting details

Dark brown

370

390

330

380

390

330

380

390

330

380

Other colours on request

X Ø3.2

Suitable for cams with Pozi 2 recess

Ø17 2.5

Ø15

Ø4.2 Ø17 Ø29.5

1000 Pcs

Ø13

Ø17

Ø4.2 Ø15 Ø15 Ø25

277-4225

370

Other colours on request

2.5

Cover Cap Ø17

Ø3.2

Made of plastic

Suitable for cams with Hex recess

Ø17 Ø29.5 X Ø3.2

2.5

Ø17

1000 Pcs Cover Cap Ø29.5

Made of plastic Ø13 Ø13

Ø4.2

Ø29.5

275-4034

Other colours on request

Ø25 Ø25

500 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.45

370

Leg height adjustment feature Description

Leg Tops

Item number

Black

•

Drilling Distance (mm)

•

Drilling Depth (mm)

•

Lip provides additional support to end panel and gives extra strength Rivet fix design gives quick fastening of socket Choice of knock-in dowel or screw-in sockets Invert second clip for corner plinth fixing

Drilling Diameter (mm)

•

With lip

Knock-in 2-pin 10/3

12.5/6 64x64

02669

835

With lip

Screw-in

64x64

02671

835

With lip

Knock-in 4-pin 10

12.5

64x64

02672

835

Without lip

Knock-in 2-pin 10/3

12.5/6 64x64

02711

835

Without lip

Screw-in

64x64

02712

835

Without lip

Knock-in 4-pin 10

12.5

64x64

02713

835

12.5

02663

835

24 Ø15x12 02671

34 x 34

ØA x D ØA x D 32

38.5

34 x 34 100 Pcs

Made of plastic

Rivet Fix Leg Top

34 x 34

32 Ø10x12.5

32 200 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.46

Adjustable Cabinet Legs

Adjustable Cabinet Legs Leg Top Fixes

• •

Leg height adjustment feature

Adjustable Leg

Item number

60-90

02570

835

92-150

02648

835

To be used with screw-in plinth clip 02634 See page > 3.49

02648

100 Pcs 300 PCs (02648)

Made of plastic

Adjustable Leg, Telescopic

85-165

02641

835

To be used with screw-in plinth clip 02500 See page > 3.49 Height adjustment from 85mm to 165mm as shown

38.5

200 Pcs

Made of plastic

Adjustable Leg, With Foot

92-150

02699

835

110-170

02645

835

125-185

02706

835

Note: To be used with screw-in plinth clip 02710 or knock-in plinth clip 02578

200 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.47

Adjustable Cabinet Legs

•

Legs are supplied assembled at a pre-set height Wide adjustment range to fit all common plinth heights Jacking point adjustment feature Simple push-on socket design Telescopic leg offers unparalleled adjustment

Black

•

Fitting Height Adjustment (mm)

•

Drilling Distance (mm)

Adjustable Cabinet Legs Adjustable Leg, Extension and Foot

• •

Leg extension for use with all adjustable legs Fixed foot allows for common drilling distance (B1) of all legs

Ø76

2569

Leg Extension

2571

Item number

Black

Leg height adjustment feature

02571

835

02569

835

50 Ø48

200 Pcs

Made of plastic

Fixed Foot

Ø76

2569

2571

50 Ø48

200 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.48

Adjustable Cabinet Legs

Adjustable Cabinet Legs Adjustable Leg, Extension and Foot

Adjustable Cabinet Legs Plinth Clips •

• •

Spring design eliminates the need for drilling and fits into any position on plinth The screw-in version can sit in variable plinth positions When taking plinth around the corner, the fitting is reversible

Leg height adjustment feature

Plinth Clip 4

02578

Description

Item number

Black

Drilling Distance (mm)

Screw-in Plinth Clip 02500 for telescopic leg

835

Knock-in Plinth Clip 02578

835

Screw-in Plinth Clip 02710

835

1371

4 32

1371

4 2578

38.5

700 Pcs

Made of plastic 4

Plinth Clip

Screw-in Plinth Clip 02634 2578

38.5 2523, 2634

2523, 2634

800 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.49

Decorative Legs

Decorative Legs for Furniture

Tiffany Leg Aluminium Ø35mm

40 Pcs

Length (mm)

Item number

Brushed Grey

100

606.8D03.907.100

Brushed Grey

125

606.8D03.907.125

Brushed Grey

150

606.8D03.907.150

Stainless Steel

150

606.8D03.530.150

Stainless Steel

200

606.8D03.530.200

Stainless Steel

250

606.8D03.530.250

Stainless Steel

300

606.8D03.530.300

Polished Chrome

870

606.8D05.452.707

Made of stainless steel

Leg Polished Chrome Ø75mm

4 Pcs

Adjustment (mm)

Made of aluminium

Leg Stainless Steel Ø50mm

10 Pcs

Finish

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.50

4 Pcs

Item number

Brushed Nickel

710

606.8D05.454.703

Polished Chrome

710

606.8D05.454.707

Anodised

150

606.8D03.807.150

Made of steel

Square Sofa Leg 32 x 32mm

1 Pce

Adjustment (mm)

Table Leg Ă&#x2DC;60mm

Finish

Length (mm)

Decorative Legs for Tables, Sofas and Beds

Made of aluminium

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.51 51

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.52

Panel Mounting Systems

Fastmount Panel Mounting ÂŽ

Fastmount Panel Mounting Systems FASTMOUNT Setting the standard for panel mounting

Clip Selection Guide

Perfect Panel Mounting

The secret to Fastmount Marine Clip Selection Guide

is the Combining speed, versatility and accuracy, the Fastmount system enables unique set of design registered designers, installers and contractors to interchangeable clips ideal for secure re-think the paneling process. fastening. With Fastmount, panels can be easily removed and refitted in Plywood Panels Synthetic Panels Synthetic Panels Honeycomb Panels Composite Panels Fastmount is designed to perform on sea, >6mm (Forex) <6mm (Aluminium) (foam core grp) any sequence, time after time. (Forex) >6mm land and in the air. Applications of use only PC-F1A + PC-M1A PC-F1A+ PC-SM2 PC-F1A + PC-M1A/ PC-F1A + PC-SM2/ PC-F1A /AF1/SF1 + limited by your imaginationPC-SM2/SM2H and common M2H/SM2/SM2H/VM1 SM2H PC-F1A + M2H/SM2/ LP-F8 + LP-SM8 sense. LP-F8 + LP-SM8 SM2/VM1 LP-F8 + LP-M8/SM8 VL-F3 + VL-M3 VL-F3 + VL-M3 TM

SUBSTRATE TYPE

PANEL TYPE Plywood Panels <6mm

Plywood frames or Cnc cut plywood ceiling

PC-F1A/AF1/SF1 + PC-SM2 VL-F3 + VL-M3 LP-F8 + LP-SM8

Benefits

Aluminium frames

LP-F8 + LP-M8/SM8

VL-F3 + VL-M3

MC-M5 + MC-F5/F10

MC-M5 + MC-F5

MC-M5• + MC-F5/F10

No visible fixings

•

LP-F8 + LP-SM8

Allows for panel flex and expansion

PC-RF1/SF1/F1A + PC-F1A/SF1/RF1 + PC-F1A + PC- SM2 PC-F1A/SF1/RF1 + PC-F1A/SF1/RF1 + • • Eliminates panel damage – install Provides cavities for services PC-SM2and PC-M1A/M2H/SM2/ PC-M1A/M2H/SM2/ PC-SM/SM2H LP-F8 + LP-SM8 SM2H VM1 SM2H/VM1 panels during final build stages enhanced acoustics VL-F3 + VL-M3 VL-F3 + VL-M3 VL-F3+VL-M3 VL-F3 + VL-M3 VL-F3 + VL-M3 MC-M5 + MC-F5

PC-RF1/SF1 PC-SF1 + PC-SM2 VL-F3 + VL-M3

•

Variety of mounting options – self MC-M5 + MC-F5/F10 tapping, glue and screw fix

MC-M5 + MC-F5/F10

Composite substrate

LP-DF8/F8 + LP-SM8

PC-F1A/SF1/AF1 + PC-M1A/ M2H/SM2/ SM2H/VM1

VL-F3 + VL-M3

Applications Steel frames

PC-SF1 + PC-SM2

VL-F3+VL-M3 • Ceilings,

PC-F1A/SF1/AF1 + PC-SM2 VL-F3+VL-M3

walls, feature MC-M5+MC-F5/F10 upholstery

PC-F1A + PC-SM2

panels VL-F3+VL-M3 and

PC-SF1• / RAccess, F1 + PC-SMinspection PC-SF1/RF1and + PC-SM2 VL-F3+VL-M3

PC-SF1 + PC-SM2 VL-F3+VL-M3

panels

MC-M5+ MC-F5/F10 •

VL-F3 + VL-M3

PC-F1A/SF1/AF1 + PC-M1A/M2H/SM2/ SM2H/VM1

PC-F1A/ SF1 + PC-SM2

LP-DF8/F8 + LP-SM8

LP-DF8 + LP-SM8

PC-AF1/SF1 + PC-

VL-F3 + VL-M3

Upholstered, painted, prefinished and VL-F3 + VL-M3 SM2 MC-M5+MC-F5/F10 composite MC-M5 panels + MC-F5

ventilation PC-SF1/RF1 +

Interior and selected exterior applications

•

Mounts into a wide variety of substrates PC-SF1/RF1 + PC-SF1/RF1 + PCPC-SM2 SM2/SM2H GRP, composite, honeycomb

PC-M1A/M2H/SM2/ e.g. SM2H/VM1 VL-F3+VL-M3

•

VL-F3+VL-M3

New build, re-fit and upgrades MC-M5+ MC-F5 MC-M5 + MC-F5/F10

MC-M5+ MC-F5/F10

Architectural Clip Selection Guide

Clip Selection Guide SUBSTRATE TYPE

PANEL TYPE Plywood

MDF

Particle Board

Acoustic Panel

Honeycomb

Fibrous Cement Board

Exterior Panels

PC-SF1 + PC-M1A

PC-SF1 + PC-SM2

N/A

PC-SF1 + PC-M2H

PC-SF1 + PCSM2H

PC-SF1 + PCSM2H + Glue Thread

PC-F1A + PC-VM1

LP-F8 + LP-SM8

N/A

PC-F1A + PC-M2H

PC-F1A + PC-M2H PC-F1A + PC-SM2

PC-F1A + PCSM2H

Must use Timber Batten + LP-F8 + LP-SM88

N/A

PC-F1A + PC-SM2

Must use Timber Batten + LP-F8 + LP-SM8

N/A

PC-F1A + PC-SM2

Drywall eg. Gib Board

LP-DF8 + LP-M8

LP-DF8 + LP-M8 LP-DF8 + LP-SM8

LP-DF8 + LP-SM8 with epoxy glue

N/A

LP-DF8 + LP-SM8

LP-DF8 + LP-SM8 with HMA (hot glue)

N/A

LP-DF8 + LP-SM8

Plywood, MDF

PC-F1A + PC-M1A

LP-F8 + LP-SM8

PC-F1A + PC-M2H

LP-F8 + LP-SM8 with epoxy glue

PC-F1A + PC-SM2

PC-F1A + PCSM2H

Steel frames eg. Rhondo

PC-SF1 + PC-SM2 PC-SF1 + PCSM2H Timber battens or frames

PC-F1A + PCSM2H Concrete + timber batten

This Clipsupporting Selection Guide should be used as a general guide Tekform only. Pleasewebsite contact Fastmount Headquarters for more detailed advice if required. Download documentation from the Titus titustekform.com.au

For overhead panels Fastmount strongly recommends a trial sample be made to prove compatability of our systems with the panels and substrates in your project.

1 | FASTMOUNT PRODUCT CATALOGUE 2015 3.53

•

PC-01 Self Tapping Clip Set

Mounting

Item number

TapFast

606.8F20.122

201

Standard self tapping system suitable for most applications, using PC-F1A and PC-M1A. Fit with CT-03 and CT-10.

100 Pairs PC-M1B Standard Self Tapping Male Clip

TapFast

606.8F20.222

202

Screws into 10mm hole drilled with CT-01 or CT-09. Fits into PC-F1A, PC-SF1, PC-RF1, PC-AF1. Install with CT-10 (CT-04 can also be used).

100 Pcs PC-M2H Self Tapping Heavy Duty Male

TapFast

606.8F20.222

402

Fits into PC-F1A, PC-SF1, PC-RF1, and PC-AF1. Mounts into 10mm hole CT-01 and CT-09. Minimum panel thickness 9mm. Install with CT-10.

100 Pcs PC-VM1 Vario Self Tapping Male Clip

TapFast

606.8F20.242

201

Variable gap, high shear strength self tapping male. Clips into PC-F1A, PC-SF1, PC-RF1, and PC-AF1. Mounts into 10mm hole CT-01 and CT-09. Install with CT-10. Minimum panel thickness 9mm. 100 Pcs PC-VMX Vario Self Tapping Extra Heavy Duty Male Clip, 15kg

TapFast

606.8F20.244

201

Male self-tapping clip with variable gap and high shear strength. Mounts into PC-F1A, PC-SF1, PC-RF1, PC-AF1. Extra heavy duty clip with 15 kg pull out load. Minimum panel thickness 9mm. Screws into 10mm hole with CT-10. 100 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.54

Panel Mounting Systems

•

Panels can easily be removed and refitted in any sequence time after time. Available in Self-tapping installation A range of standard clips designed for adhesive fix, heavy duty, high sheer strength and variable gap requirements.

Black

•

White

Fastmount Panel Mounting Systems Standard Profile Range

•

PC-SM2 Standard Surface Mounted Male Clip

Mounting

Item number

Surface

606.8F20.222

Brown

•

Black

•

White

Fastmount Panel Mounting Systems Standard Profile Range

801

Adhesive fix super-groove base. Fits into PC-F1A, PC-SF1, PC-RF1, and PC-AF1.

100 Pcs PC-SM2H Standard Surface Mount Heavy Duty Male Clip, 10kg

Surface

606.8F20.224

802

Male surface mount heavy duty clip with super groove base for increased loading. Mounts into PC-F1A, PC-SF1, PC-RF1 and PC-AF1. 10 kg pull out load per clip. Epoxy glue ﬁx. No special tools required for installation. 100 Pcs PC-F1A Standard Self Tapping Female Clip

TapFast

606.8F20.322

201

Mounts into 16.8mm hole drill with CT-07, CT-13. Compatible with male clips, PC-M1A, PC-M2H, PC-SM2, and PC-VM1. Install with CT-03.

100 Pcs PC-SF1 Standard Surface Mount Female Clip

Surface

606.8F20.322

101

Screw fix. See product sheet for details. Compatible with PC-M1A, PC-M2H, PC-SM2, and PC-VM1.

100 Pcs PC-RF1-B Standard Surface Mount Female Clip

Surface

606.8F20.322

143

Screw fixed to side of decks heads (use CT-18 install jig), for ceiling application. Suitable for other applications such as floor panels and cabinets. Compatible with male clips, PCM1A, PC-M2H, PC SM2, and PC-VM1. 100 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.55

PC-AF1 Standard Female Autofit Clip

Mounting

Item number

Autofit

606.8F20.322

White

Panel Mounting Systems

Fastmount Panel Mounting Systems Standard Profile Range

121

Female clip with lateral adjustment push fits into pre-drilled hole in deck head frame (grounds). Fits all standard male clips: PC-M1A, PC-M2H, PC-SM2, PC-SM2H, and PC-VM1. 25 Pcs

â&#x20AC;˘

Standard Profile Range Sample and Trial Kits

Specifically designed to evaluate Fastmount removable panel mounting styles

Item number

CD-03 Standard Profile A5 Sample Panel

606.8F50.200.000 Demonstrates PC-F1A, PC-M1A, PC-M2H, PC-SM2, PC-VM1, PC-RF1 Standard Profile Range clips. Includes: CT-05 panel removal tool.

1 Pce CT-06T Standard Profile Range Trial Kit Complete with Tools

606.8F60.201.060 Complete with clips and tools. Includes: PC-F1A x12, PCM1A x12, PC-M2H x4, PC-SM2 x4, PC-SM2H, PC-VM1 x4, PC-RF1 x4, PC-SF1 x4, CP-01A x4, CT-01, CT-03, CT-05, CT-07, CT-09, CT-10.

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

3.56

Fastmount Panel Mounting Systems Standard Profile Range Standard Profile Range Installation Tools

Item number

CT-01 Standard Profile Drill, 10mm with Shoulder

606.8F44.205.010 Use with Standard Profile Range and Low Profile Range. For drilling through panel and pilot hole for CT-07.

1 Pce CT-09 Standard Profile Drill, 10mm Forstner

606.8F44.205.090 Use with Standard Profile, Low Profile and Maxi Metal Range. To drill blind holes in the back of panels. See install guides and videos.

1 Pce CT-07 Standard Profile Step Drill, Tungsten

606.8F44.205.070 Use with Standard Profile Range for PC-F1A, 16.8mm diameter tungsten tipped to drill out 10mm hole in frame. See install guides and video for correct use.

1 Pce CT-013A Standard Profile Ă&#x2DC;6.8mm Carbine Step Drill

606.8F44.205.130 Use with Standard Profile Range. To drill holes in fibreglass, carbon fibre and kevlar laminates.

1 Pce CT-15 Standard Tap Insertion Tool

606.8F44.206.150 Use with Standard Profile Range. Tap tool for tapping thread to fit PC-F1A into fibre glass, aluminium, or similar. Drill hole with CT-13A or drill out 10mm hole with CT-07 then tap.

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

3.57

Panel Mounting Systems

Fastmount Panel Mounting Systems Standard Profile Range Standard Profile Range Installation Tools

Item number

CP-01ST Centre Point Insertion Tool

606.8F40.204.016 Use to align holes in panel and frame when using blind holes in panel. Fits 10mm blind hole in panel (drilled with CT-09) or into PC-F1A, PC-SF1, PC-RF1 and PC-AF1. Stainless Steel tip option for hard material. Use CP-01A for softer materials.

1 Pce CT-03 Standard Female Insertion Tool

606.8F44.207.030 Use with Standard Profile Range. For installation of self tapping female PC-F1A, using battery drill with correct torque setting.

1 Pce CT-10 Standard Self Tapping Male Clip Insertion Tool

606.8F44.207.100 Use with Standard Profile, Low Profile, and Panel Control Range. For installation of self tapping male PC-M1A, PC-M2H, PC-VM1, PS-150, and LP-M8, using battery drill with correct torque setting.

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

3.58

Fastmount Panel Mounting Systems Standard Profile Range Standard Profile Range Installation Tools

Item number

CT-08 Standard Installation Kit

606.8F44.201.080 Installation tools for Standard Profile Range of clips. One each CT-01, CT-03, CT-05, CT-07, CT-09, and CT-10 in plastic box.

1 Kit CT-06S Standard Profile Range Service Kit

606.8F44.222.060 For on-board maintenance of Standard Profile Range clips. Includes: PC-M1A x24, PC-M2H x4, PC-SM2 x4, PC-SM2H x4, CT-10 male clip tool, CT-05 covered panel removal tool.

1 Kit Additional Installation Tools CT-05 > See page 3.73

CT-17 > See page 3.73

CT-12 > See page 3.73

CT-18 > See page 3.73

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.59

•

LP-M8 Low Profile Self Tapping Male Clip

Self tapping and surface mount for a variety of substrates, Suitable for rigid foam core, soft core materials, balsa, and plasterboard 360 degree lateral adjustment, ﬁtting into a ø35 hole.

Mounting

Item number

TapFast

606.8F22.122

201

Screws into plywood and MDF type boards with 10mm hole. Mark with CP-08, drill with CT-09 and install with CT-10 install tool. Use with LP-F8 and LP-DF8 female clips. 100 Pcs LP-SM8 Low Profile Surface Mount Male Clip

Surface

606.8F22.222

801

Adhesive fix super groove base onto panel or frame. Can also be screw fixed with #6 gauge self tapping screw. Use with LP-F8 or LP-DF8 female Low Profile Range clips.

100 Pcs LP-F8 Low Profile Self Tapping Female Clip

TapFast

606.8F22.322

201

Screws into plywood and MDF type boards with 25 to 25.4mm hole with CT-19 install tool. Use with LP-M8 and LP-SM8 male clips.

100 Pcs LP-DF8 Low Profile Self Tapping Female Clip, Coarse Thread

TapFast

606.8F22.322

401

Screws into 25mm hole into drywall plasterboard and soft core material (rigid foam/balsa) from 10mm thick with CT-19 install tool, in battery drill with correct clutch setting. Use with LP-M8 and LP-SM8 male clips. 100 Pcs LP-AF8 Low Profile Female Autofit Clip

Autofit

606.8F22.322

121

Female clip with lateral adjustment push fits into 35mm pre-drilled hole in deck head frame (grounds). Fits all Low Profile Range male clip halves. Designed for use with curved panels. 100 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.60

Panel Mounting Systems

•

White

Fastmount Panel Mounting Systems Low Profile Range

â&#x20AC;˘

SpeciďŹ cally designed to evaluate Fastmount removable panel mounting styles

Low Profile Range Sample and Trial Kits

Item number

CD-08 Low Profile Range Sample Panel

606.8F50.220.000 Demonstration panel for Low Profile Range series. Includes: LP-F8, LP-M8, LP-SM8, LP-AF8.

1 Kit LP-08T Low Profile Trial Kit

606.8F60.221.080 Complete with clips and tools. Includes: LP-F8 x12, WLP-DF8 x4, LP-AF8 x4, LP-M8 x8, LP-SM8 x4, CP-08 x4, CT-05, CT-10, CT-20 with product sheets and installation guide.

1 Kit Download supporting documentation from the Titus Tekform website titustekform.com.au

3.61

Panel Mounting Systems

Fastmount Panel Mounting Systems Low Profile Range Low Profile Range Installation Tools

Item number

CP-08ST Low Profile Centre Clip Insert

606.8F40.224.086 Stainless steel tip center points for use with Low Profile Range clips LP-F8 and LP-DF8. Used to mark hard panel materials where plastic center point (CP-08) will not work.

100 Pcs CT-19 Low Profile Insertion Tool

606.8F44.227.194 Aluminium install tool for female clips LP-F8 and LP-DF8 Low Profile Range. Use in battery drill with correct clutch setting.

1 Pce CT-20 Low Profile Insertion Tool

606.8F44.227.206 Red plastic moulded install tool for female clips LP-F8 and LPDF8 Low Profile Range. Use in battery drill with correct clutch setting. For normal use, for large quantity installs use CT-19.

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

3.62

Fastmount Panel Mounting Systems Low Profile Range Low Profile Range Installation Tools

Item number

LP-08Y Low Profile Installation Kit

606.8F44.221.060 Contains tools for installing Low Profile Range clips (LP-F8, LPDF8, LP-M8) and panel removal tool (covered panels). Plastic box with CT-05, CT-09, CT-10, CT-20 x1.

1 Pce CT-01 Standard Profile Drill, 10mm with Shoulder

606.8F44.205.010 Use with Standard Profile Range and Low Profile Range. For drilling through panel and pilot hole for CT-07.

1 Pce CT-09 Standard Profile Drill, 10mm Forstner

606.8F44.205.090 Use with Standard Profile, Low Profile and Maxi Metal Range. To drill blind holes in the back of panels. See install guides and videos.

1 Pce CT-10 Standard Self Tapping Male Clip Insertion Tool

1 Pce Additional Installation Tools > See page 3.73 Download supporting documentation from the Titus Tekform website titustekform.com.au

3.63

• • •

VL-03 Very Low Profile Clip Set

Self-aligning secure mounting (min. 5kg per clip) Quick installation requires no special tools or skilled labour Clip lead in for easy ﬁtting Can be screw ﬁxed with lateral adjustment

Mounting

Item number

Surface Recessed

606.8F24.122

101

For surface or recessed mounting. Can be screw or glue fixed. Versatile clip able to be installed without special tools. Pull out load 5kg per clip. VL-03 set packed 100 per bag with VL-M3+VL-SS3 inner bag, VL-F3 in outer bag. Now supplied with stainless steel screw (VL-SS3).

100 Pairs VL-M3 Very Low Profile Male Screw on Surface Mount Clip

Surface

606.8F24.222

101

Male clip half for surface mounting. Can be screw fixed with lateral adjustment or glue fixed. Versatile clip able to be installed without special tools. Pull out load 5kg per clip. The VL-M3 is used with VL-F3 + VL-SS3.

100 Pcs VL-F3 Very Low Profile Female Screw on Clip

Surface Recessed

606.8F24.322

101

Female clip half for surface or recessed mounting. Can be screw or glue fixed. Versatile clip able to be installed without special tools. Pull out load 5kg per clip use with VL-M3.

100 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.64

Panel Mounting Systems

•

Silver

Fastmount Panel Mounting Systems Very Low Profile Range

• • •

VL-03H Very Low Profile Heavy Duty Clip Set

Self-aligning secure mounting (min. 10kg per clip) Quick installation requires no special tools or skilled labour Clip lead in for easy ﬁtting Can be screw ﬁxed with lateral adjustment

Mounting

Item number

Surface Recessed

606.8F24.522

Stainless Steel

•

Black

Fastmount Panel Mounting Systems Very Low Profile Range

004

Male and female very low profile heavy duty system designed for surface or recessed mounting of heavier panels. 10 kg pull out load per clip set. Can be glue or screw fixed with VL-SS3. No special tools required for installation. Supplied with stainless steel screw VL-SS3.

100 Pairs VL-M3H Very Low Profile Heavy Duty Male Clip

Surface

606.8F24.224

000

Male very low profile surface mount clip. Compatible with female clip VL-F3H. 10 kg pull out load per clip set. Can be glue or screw fixed with VL-SS3. No special tools required for installation.

100 Pcs VL-F3H Very Low Profile Heavy Duty Female Clip

Surface Recessed

606.8F24.124

101

Female very low profile heavy duty clip for surface or recessed mounting. Compatible with male clip VL-M3H. 10 kg pull out load per clip set. Epoxy glue or screw fix with VL-SS3. No special tools required for installation.

100 Pcs VL-SS3 Very Low Profile Screw

Screw-in

606.8F24.523

004

Custom type 303 stainless steel screw for fixing VL-03 and VL-03H clip sets into panels as thin as 5.5mm. Pozi drive head. Supplied with VL-03 and VL-03H clip sets.

100 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.65

â&#x20AC;˘

SpeciďŹ cally designed to evaluate Fastmount removable panel mounting styles

Panel Mounting Systems

Fastmount Panel Mounting Systems Very Low Profile Range Very Low Profile Range Sample and Trial Kits

Item number

CD-VL3 Very Low Profile Sample Panel

606.8F50.240.000 Demonstration panel for Very Low Profile Range clip series. VL-03 = VL-F3 + VL-M3.

1 Kit LP-03T Very Low Profile Trial Kit

606.8F60.241.030 Includes: VL-F3 x10, VL-M3 x10, VL-SS3 x10, VL-CP x2 with metal tip, plus information pack.

1 Kit

Very Low Profile Range Installation Tools

Item number

VL-CP3 Very Low Profile Centre Point Insert

606.8F40.244.036 Center point for Very Low Profile Range clips VL-F3 and VL-M3. Use to mark hole centre in panel for correct clip alignment. Has stainless steel tip for marking panel or frame. Tip: push fits into either side of nylon molding. See install guide.

100 Pcs Additional Installation Tools > See page 3.73 Download supporting documentation from the Titus Tekform website titustekform.com.au

3.66

• • • •

MC-05 Metal Range Panel Clip Set, 5kg

Metal clip to withstand high temperatures Allows for tolerance & panel ﬂex (self-centering) Provides acoustic & vibration isolation 10kg pull out load

Mounting

Item number

TapFast / Screw on

606.8F30.122

Grey Metal

Fastmount Panel Mounting Systems Metal Range

204

Ideal for fire rated panels the MC-05 is designed to withstand high temperatures and also provides acoustic and vibration isolation. The self-centering design allows for tolerance and panel flexing. Self-tapping with MC-IT5 and screw fit installation options. Can be used in conjunction with Standard Profile Range Clips. MC-05 = MC-F5+ MC-M5. 5kg pull out load. 100 Pairs MC-10 Metal Range Maxi Clip Set, 10kg

TapFast / Screw on

606.8F30.324

804

Ideal for fire rated panels the MC-10 is designed to withstand high temperatures and also provides acoustic and vibration isolation. The self-centering design allows for tolerance and panel flexing. Self-tapping with MC-IT5 and screw fit installation options. Can be used in conjunction with Standard Profile Range Clips. MC-10 = MC-F10 + MC-M5. 10kg pull out load. 100 Pairs MC-F10 Metal Range Self Tapping Female Clip, 10kg

TapFast / Screw on

606.8F30.324

204

Female half of metal clip set MC-10 (black centre), use with MC-M5. Self-tapping with MC-IT5, and screw fit installation with #5 gauge screws.

100 Pcs MC-F5 Metal Range Self Tapping Female Clip, 5kg

TapFast / Screw on

606.8F30.322

804

Female half of metal clip set MC-05 (white centre), use with MC-M5. Self-tapping with MC-IT5, and screw fit installation with #5 gauge screws.

100 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.67

MC-M5 Metal Range Self Tapping Male Clip

Mounting

Item number

TapFast

606.8F30.222

Grey Metal

Panel Mounting Systems

Fastmount Panel Mounting Systems Metal Range

204

Self tapping male half of Maxi Metal Clip Set fits MC-F5 & MC-F10. Install with MC-IT5.

100 Pcs

â&#x20AC;˘

Metal Range Sample Kits

Sample Kits are specifically designed to evaluate the FastMount Metal Range Panel mounting System Installation tools specifically designed for FastMount metal range panel system

Item number

CD-MC5 Metal Range Sample Panel Kit

606.8F50.300.000 Demonstration panel for Maxi Metal Range clips with MC-F5 + MC-M5H.

1 Kit Download supporting documentation from the Titus Tekform website titustekform.com.au

3.68

Fastmount Panel Mounting Systems Metal Range Metal Range Installation Tools

Item number

MC-CP5 Metal Range Centre Point Insert

606.8F40.304.056 Centre point fits MC-F5 metal clip. Use to mark hole centre in panel, for correct clip alignment. Has stainless steel tip for marking panel. Refer to install guide.

100 Pcs MC-IT5 Install Tool for Metal Clip MC-F5 and MC-M5

606.8F44.418.054 For installation of self tapping male MC-M5H, can also be used for MC-F5 into plywood or similar. Use battery drill with correct torque setting. Refer to installation video.

1 Pce CT-09 Standard Profile Drill, 10mm Forstner

606.8F44.205.090 Use with Standard Profile, Low Profile and Maxi Metal Range. To drill blind holes in the back of panels. See install guides and videos.

1 Pce Additional Installation Tools > See page 3.73 Download supporting documentation from the Titus Tekform website titustekform.com.au

3.69

• • • •

PS-150E Panel Safe Easy Fit Self Tapping Clip, 150mm

Secures heavy panels Easy one person removal of large panels Prevents panels falling during ﬁre exit Works with existing Fastmount clips

Mounting

Item number

TapFast

606.8F36.122.205

Panel Mounting Systems

Fastmount Panel Mounting Systems Panel Control Range

Suspends panel on removable stainless steel wire strops. Suitable for use in conjunction with any of the Fastmount range of clips. Standard drop length 150mm, with custom lengths available on request. Install with CT-10. Note: custom products have a six week lead time.

10 Pcs PS-S150E Panel Safe Easy Fit Surface Mount Clip, 150mm

Surface

606.8F36.122.805

Suspends panel on removable stainless steel wire strops. Suitable for use in conjunction with any of the Fastmount range of clips. Standard drop length 150mm, with custom lengths available on request. Glue or screw fix to panel. Note: custom products have a six week lead time.

10 Pcs PS-150 Panel Safe Clip, 150mm

TapFast

606.8F36.122.215

Suspends panel on removable stainless steel wire strops. Suitable use in conjunction with any of the Fastmount range of clips. Standard drop length 150mm, with custom lengths available on request. Install with CT-07, CT-03 and CT-10. Note: custom products have a six week lead time.

10 Pcs PS-Custom Panel Safe Customer Length

TapFast

606.8F36.100.000*

Specify required type & length. Use with Fastmount system clips. PS-S custom, surface mount option & easy fit or standard options available. Custom lengths from 50mm to 500mm. *Available upon special request 50 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.70

Fastmount Panel Mounting Systems Textile Range

•

• •

•

TC-06 Textile Range Clip Set

Enables the attachment of soft furnishings to hard surfaces and makes furnishings quick to install, and remove. Easy alignment to replace the cushion Invisible fixing – no visible domes, screws, straps or hook and loop 10kg break out load

Mounting

Item number

Screw-on

606.8F37.122.060

Textile Clip Set = TC-M6 + TC-F6 Secure textile and soft furnishing clip system. Ensures fast, precise cushion fixing, and fast cushion removal

100 Pcs TC-F6 Female Textile Clip

Screw-on

606.8F37.322.260

Enables the attachment of soft furnishings to hard surfaces and makes furnishings quick to install, and remove. High quality, secure finish Easy alignment to replace the cushion Invisible fixing 10kg break out load 100 Pcs TC-M6 Male Textile Clip

Screw-on

606.8F37.222.160

606.8F44.418.060 No force required to remove the furnishing –simply press one of the three buttons to disengage the block Saves removal time for staff and crew

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

3.71

Panel Mounting Systems

Fastmount Panel Mounting Systems Textile Range

Textile Range Sample and Trial Kits

Item number

TC-06T Textile Range Sample Panel and Trial Kit

606.8F60.261.060 A4 size cushion sample panel demonstrating TC-F6 and TC-M6 from the Textile Range. 4 x TC-F6, 4 x TCM6, 2 x TC- CP6, 1 x TC-R6

1 Kit

Textile Range Installation Tools

Item number

TC-CP6 Textile range Centre Point Insert

606.8F40.404.060 Textile Range centre point with stainless steel tip to mark hole centre in panel for correct clip alignment. See install guide for additional information.

Additional Installation Tools > See page 3.73 10 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

3.72

Fastmount Panel Mounting Systems Installation Tools

â&#x20AC;˘

Installation tools designed specfically for the Fastmount panel mounting systems

Item number

CT-12 HSS Countersink drill bit, 31mm with 10mm shank

606.8F44.415.054 To be used to countersink entry edge of hole (1-2mm) in hard materials such as MDF, hard plywood, fibre glass, plastic. Use when drilling holes for PC-M1B, PC-M2H, PC-VM1, PC-VM1H, LP-M8, LP-F8, LP-DF8

1 Pce CT-18 Guide Drill

606.8F44.415.184 Use with Standard Profile Range. Drill guide for PC-RF1 mounting options.

1 Pce CT-05 Panel Removal Tool

606.8F44.418.050 Stainless steel tool for removing covered (upholstered) panels. Do not use with painted panels.

1 Pce CT-17 Panel Removal Tool, Painted Panel

606.8F44.418.170 Panel removal and handling, using a glass suction cup for painted and prefinished panels. Always use two glass suckers to control panel removal.

1 Pce CT-09DG Drill Gauge for CT-09 Drill Bit

606.8F44.205.091 Drill Gauge for use with CT-09 drill bit. Designed for depth control when blind drilling for Standard and Low ProďŹ le range male clips. Machined aluminium housing, anodised red for durability. NOTE: Sold separately to CT-09.

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

3.73

• • • •

High Strength 2-part glue bonds to most substrates Quick 10 minute curing Non-toxic Ideal for Fastmount SuperGroove™ surface mount clips

Item number

CG-3010 SuperGroove™ Adhesive, 30ml

606.8F38.200.030 Fastmount SuperGroove Adhesive™ 30ml twin tube manual dispenser for use with the Fastmount Surface Mount range. 10 minute cure, solvent free, non-toxic, no VOCs, RoHS and REACH compliant, 12 month shelf life. Ideal for small installations and emergency repairs. Proportional 1:1 mixing. No additional equipment required.

1 Pce CG-40010 SuperGroove™ Adhesive, 400ml

1 Pce CG-400MT SuperGroove™ Adhesive Self-Mixing Nozzles

606.8F38.200.400 Fastmount SuperGroove Adhesive™ 400ml twin tube dispenser with self-mixing nozzle for use with Fastmount Surface Mount range. 10 minute cure, solvent free, nontoxic, no VOCs, RoHS and REACH compliant, 12 month shelf life. Ideal for large scale installations. Supplied with two self-mixing nozzles for proportional mixing. Use with SuperGroove Adhesive Gun (sold separately). Additional self-mixing nozzles can be purchased. 606.8F38.201.000 Pack of 5 disposable self-mixing nozzles designed for use with CG-40010 SuperGroove Adhesive™ 400ml. NOTE: Glue not included.

5 Pcs CG-400G SuperGroove™ Adhesive Gun for 400ml Tube

606.8F38.201.400 SuperGroove Adhesive™ gun designed for use with CG-40010 SuperGroove Adhesive™ 400ml twin tube. Robust steel construction.

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

3.74

Panel Mounting Systems

Fastmount Panel Mounting Systems SuperGroove™ Adhesive

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.1

Fasteners

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.2

Fasteners

Product guide

Screws Page

Woodfast countersunk

4.3

Woodfast panhead

4.4

Hi-Lo funnel head

4.5

SupaTop countersunk

4.6

TapFast

4.7

CabFast

4.8

SoloFast

4.9

EuroFast

4.10

HandleFast

4.11

CombiFast

4.12

Brad Nails Page

4.1

C Series

4.13

C1 Series

4.13

DA13 Series

4.14

Staples Page

80 Series wire staples

4.15

90 Series wire staples

4.15

Accessories Page

Anchors

4.16

WallMate

4.16

Wall Plugs

4.16

Cover Caps

4.17

FastEdge Accessories

4.20

Conversion Tables

4.21

4.2

• • •

WoodFast Countersunk Reinforced

Length

1000 Pcs 500 Pcs (245.065 & 250.075)

Item number

Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2

3.5 3 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4 4.5 5

13 16 16 20 25 32 40 16 20 25 28 32 40 45 50 57 65 75

611.8K16.235 611.8K16.230 611.8K16.235 611.8K16.235 611.8K16.235 611.8K16.235 611.8K16.235 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.245 611.8K16.250

Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2

3.5 3 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4.5 4.5 5

13 16 16 20 25 28 32 40 16 20 25 28 32 40 45 50 57 65 75

611.8K24.235 611.8K24.230 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.245 611.8K24.245 611.8K24.250

Length

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.3

> > > > > > > > > > > > > > > > >

013 016 016 020 025 032 040 016 020 025 028 032 040 045 050 057 065 075

Made of steel

WoodFast Countersunk Reinforced

1000 Pcs 500 Pcs (245.065 & 250.075)

Drive type

Length (mm)

Technical details

Thread gauge

•

Particle board screw with long and coarse thread Reinforced double countersunk head Deeper recess provides for higher torque 40° thread pitch

Zinc plated

Fasteners WoodFast Countersunk Screw

> > > > > > > > > > > > > > > > > >

013 016 016 020 025 028 032 040 016 020 025 028 032 040 045 050 057 065 075

Fasteners WoodFast Panhead Screws • •

WoodFast Panhead Reinforced

Length

1000 Pcs

Item number

Philips Drive No 2

611.8K29.230

013

Philips Drive No 2

3.5

611.8K29.235

013

Philips Drive No 2

3.5

611.8K29.235

025

Philips Drive No 2

611.8K29.240

025

Philips Drive No 2

611.8K29.240

032

Philips Drive No 2

611.8K29.240

050

Zinc plated

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners

•

Particleboard screw with long and course thread 40˚ pitch Safer and faster driving

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.4

Fasteners Hi-Lo Funnel Head Screws • •

•

Hi-Lo Funnel Head

Item number

Philips Drive No 2

611.8F13.440

045

Pozidrive No 2

611.8F23.440

045

Black

Drive type

Length (mm)

Technical

1056details

Thread gauge

•

Hi-Lo™ screws have a twin thread for faster insertion ‘Hi’ threads and ‘Lo’ threads combine to give excellent pull out strength in chipboard Funnel head design means no countersinking Steel is case hardened for extra strength

POZIDRIV No.2 RECESS S 5-6 0066 6-8 0071 0077 11.5-13 12-14 0172

L 18-19 32-33 44-45.5 53.5-55

Ø7.6 Length L

POZIDRIV No.2 RECESS

4-5

1000 Pcs

47-48

Ø7.9

Ø5

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.5

Fasteners ChipFast Countersunk Nib Screws

• • •

ChipFast Countersunk Nib

Length

1000 Pcs 500 Pcs (240.065 & 250.075)

Philips Drive No 2

3.7

611.8C14.240

016

Philips Drive No 2

611.8C14.240

019

Philips Drive No 2

611.8C14.240

025

Philips Drive No 2

611.8C14.240

028

Philips Drive No 2

611.8C14.240

030

Philips Drive No 2

611.8C14.240

032

Philips Drive No 2

611.8C14.240

035

Philips Drive No 2

611.8C14.240

038

Philips Drive No 2

611.8C14.240

040

Philips Drive No 2

611.8C14.240

045

Philips Drive No 2

611.8C14.240

050

Philips Drive No 2

611.8C14.240

057

Philips Drive No 2

611.8C14.240

065

Philips Drive No 2

611.8C14.250

075

Pozidrive No 2

611.8C24.240

020

Pozidrive No 2

611.8C24.240

025

Pozidrive No 2

611.8C24.240

028

Pozidrive No 2

611.8C24.240

030

Pozidrive No 2

611.8C24.240

032

Pozidrive No 2

611.8C24.240

035

Pozidrive No 2

611.8C24.240

038

Pozidrive No 2

611.8C24.240

040

Pozidrive No 2

611.8C24.240

045

Pozidrive No 2

611.8C24.240

050

Pozidrive No 2

611.8C24.240

057

Pozidrive No 2

611.8C24.240

065

Pozidrive No 2

611.8C24.250

075

Zinc plated

Item number

Made of steel

ChipFast Countersunk Nib

Length

1000 Pcs 500 Pcs (240.065 & 250.075)

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners

•

Self-countersinking head with nibs 3/4 thread Coarse thread Needle screw point

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.6

•

SupaTop Countersunk Nib Head Hole

Length

1000 Pcs 500 Pcs (245.065 & 245.070)

Item number

Philips Drive No 2

4.5

611.8H18.245

025

Philips Drive No 2

4.5

611.8H18.245

028

Philips Drive No 2

4.5

611.8H18.245

030

Philips Drive No 2

4.5

611.8H18.245

035

Philips Drive No 2

4.5

611.8H18.245

040

Philips Drive No 2

4.5

611.8H18.245

045

Philips Drive No 2

4.5

611.8H18.245

050

Philips Drive No 2

4.5

611.8H18.245

060

Philips Drive No 2

4.5

611.8H18.245

065

Philips Drive No 2

4.5

611.8H18.245

070

Pozidrive No 2

4.5

611.8H28.245

025

Pozidrive No 2

4.5

611.8H28.245

028

Pozidrive No 2

4.5

611.8H28.245

030

Pozidrive No 2

4.5

611.8H28.245

035

Pozidrive No 2

4.5

611.8H28.245

040

Pozidrive No 2

4.5

611.8H28.245

045

Pozidrive No 2

4.5

611.8H28.245

050

Pozidrive No 2

4.5

611.8H28.245

060

Pozidrive No 2

4.5

611.8H28.245

065

Pozidrive No 2

4.5

611.8H28.245

070

Made of steel

SupaTop Countersunk Nib Head Hole

Length

1000 Pcs 500 Pcs (245.065 & 245.070)

Drive type

Length (mm)

Technical details

Thread gauge

•

Reinforced double countersunk head with self-countersinking nibs Suitable for long stem head hole covers Deeper recess provides for higher torque

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.7

Zinc plated

Fasteners SupaTop Countersunk Nib Head Hole Screws

Fasteners TapFast Screws Fine thread for quick insertion

TapFast Countersunk

Length

1000 Pcs

Item number

Philips Drive No 2

3.5

611.8I12.235

013

Philips Drive No 2

3.5

611.8I12.235

016

Philips Drive No 2

3.5

611.8I12.235

032

Philips Drive No 2

611.8I12.240

016

Philips Drive No 2

611.8I12.240

020

Philips Drive No 2

611.8I12.228

025

Philips Drive No 2

3.5

611.8I19.235

016

Philips Drive No 2

611.8I19.240

016

Zinc plated

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners

â&#x20AC;¢

Made of steel

TapFast Panhead

Length

1000 Pcs

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.8

CabFast Wafer Head

Item number

Philips Drive No 2

611.8B17.140

016

Philips Drive No 2

611.8B17.140

028

Philips Drive No 2

611.8B17.140

032

Philips Drive No 2

611.8B17.140

050

Philips Drive No 2

611.8B17.140

065

Zinc plated

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners CabFast and SoloFast Screws

Length

• • •

1000 Pcs

Made of steel

SoloFast Connecting

Pozidrive No 2

611.8G22.050

050

Pozidrive No 2

611.8G22.070

050

•

4500 Pcs

White button head 3/4 thread Course thread

•

Cabinet construction screw For pre-drilled stepped holes

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.9

Fasteners EuroFast Screws â&#x20AC;˘

Hardware assembly screw For 5mm pre-drilled holes

Diameter

Countersunk screw

Length

Countersunk Pozidrive No 2

611.8E22.360

010

Countersunk Pozidrive No 2

611.8E22.360

013

Countersunk Pozidrive No 2

6.3

611.8E22.363

710

Countersunk Pozidrive No 2

6.3

611.8E22.363

713

Countersunk Pozidrive No 2

6.3

611.8E23.363

810

Countersunk Pozidrive No 2

6.3

611.8E23.363

813

10.5

611.8E29.963

513

Nickel plated

Item number

Drive type

PanHead Pozidrive No 2

Diameter

PanHead screw

Length (mm)

EuroFast Screw

Head diameter (mm)

Technical details

Screw diameter (mm)

Fasteners

â&#x20AC;˘

Length

1000 Pcs

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.10

Fasteners HandleFast Screws

HandleFast Trusshead

Length

1000 Pcs (Screw lengths up to 28mm) 500 Pcs (Screw lengths over 28mm)

Type

Item number

Trusshead

611.8L35.245

010

Trusshead

611.8L35.245

012

Trusshead

611.8L35.245

016

Trusshead

611.8L35.245

020

Trusshead

611.8L35.245

022

Trusshead

611.8L35.245

025

Trusshead

611.8L35.245

028

Trusshead

611.8L35.245

032

Trusshead

611.8L35.245

035

Trusshead

611.8L35.245

038

Trusshead

611.8L35.245

042

Trusshead

611.8L35.245

045

Trusshead

611.8L35.245

050

Made of Steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.11

Zinc plated

Technical details

Combination head Button head

Length (mm)

•

Thread type

•

Length

1000 Pcs

5/16

611.8D23.150>

050

5/16

611.8D23.150>

060

Lag Screw

5/16

611.8D23.150>

087

Insert Nut Type, Headed

1/4

611.8D22.014

Insert Nut Type, Headed

611.8D22.060

Insert Nut Type, Unheaded

611.8D22.060>

513

Insert Nut Type, Headed

611.8D22.060

616

Insert Nut Type, Unheaded

611.8D22.360

Type

Lag Screw Lag Screw

Yellow zinc

Item number

Zinc plated

CombiFast Lag Screws

Length (mm)

Technical details

Thread type

Fasteners

Fasteners CombiFast Screws

Made of steel

CombiFast Insert Nuts

202 132

Length

5000 Pcs

132

Made of Zinc

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.12

BradNails C Series

Length Diameter

5000 Pcs

Item number

Brad Nail

16G

611.8P19.316

019

Brad Nail

16G

611.8P19.316

025

Brad Nail

16G

611.8P19.316

630

Brad Nail

16G

611.8P19.316

632

Brad Nail

16G

611.8P19.316

635

Brad Nail

16G

611.8P19.316

638

Brad Nail

16G

611.8P19.316

640

Brad Nail

16G

611.8P19.316

645

Brad Nail

16G

611.8P19.316

650

Brad Nail

16G

611.8P19.316

664

Brad Nail

18G

611.8P19.318

813

Brad Nail

18G

611.8P19.318

815

Brad Nail

18G

611.8P19.318

820

Brad Nail

18G

611.8P19.318

825

Brad Nail

18G

611.8P19.318

830

Brad Nail

18G

611.8P19.318

835

Brad Nail

18G

611.8P19.318

840

Brad Nail

18G

611.8P19.318

845

Brad Nail

18G

611.8P19.318

850

Made of steel

BradNails C1 Series

Length Diameter

5000 Pcs 10000 Pcs (611.8P19.318.813 )

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.13

Galvanised

Type

Length (mm)

Technical details

Thread gauge

Fasteners Brad Nails

Brad Nail

Angle 15G

611.8P19.415

025

Brad Nail

Angle 15G

611.8P19.415

032

Brad Nail

Angle 15G

611.8P19.415

038

Brad Nail

Angle 15G

611.8P19.415

045

Brad Nail

Angle 15G

611.8P19.415

050

611.8P20.015

Flathead Nail

1.5

Zinc plated

Item number

Galvanised

Length (mm)

BradNails DA13 Series

Type

Thread gauge

Technical details

Diameter (mm)

Fasteners

Fasteners Brad Nails

020

Length Diameter

3000 Pcs 40 Pcs (611.8P20.015.020)

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.14

Wire Staples 80 Series

Length

Item number

Staples

611.8P22.080

006

Staples

611.8P22.080

008

Staples

611.8P22.080

010

Staples

611.8P22.080

012

Staples

611.8P22.080

014

Type

Galvanised

Length (mm)

Technical details

Thread gauge

Fasteners Staples

10000 Pcs Wire Staples 90 Series

Made of steel

Length

5000 Pcs

Staples

18G

611.8P22.090

016

Staples

18G

611.8P22.090

018

Staples

18G

611.8P22.090

022

Staples

18G

611.8P22.090

025

Staples

18G

611.8P22.090

028

Staples

18G

611.8P22.090

032

Staples

18G

611.8P22.090

038

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.15

Anchors

Diameter

Length

100 Pcs

611.8Q26.660

000

Nylon Anchor, Philips Drive No. 2

611.8Q26.670

000

611.8Q26.100

Red

Green

Nylon Anchor, Philips Drive No. 2

Zinc plated

Item number

Type

Yellow zinc

Length (mm)

Technical details

Diameter (mm)

Fasteners

Fasteners Fastener Accessories

Made of nylon and steel Wallmate for Plasterboard, Philips Drive No. 2

WallMate

Diameter

000

Length

100 Pcs

Made of zinc

Wall Plugs

Length

Diameter

500 Pcs 50m roll (.060.500)

Wall Plug

611.8Q26.070

050

Wall Plug

6.5

611.8Q26.650

035

Wall Plug

6.5

611.8Q26.065

050

Red Spaghetti (For fixing into plasterboard)

Ă&#x2DC;5.5mm inner Ă&#x2DC;6mm Drill

611.8Q26.060

500

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.16

Technical details

Diameter

Star Screw Caps

1000 Pcs

Finish

Item number

White

611.8Q24.012.001

Star Screw Cap

Antique White

611.8Q24.012.004

Star Screw Cap

Black

611.8Q24.012.002

Star Screw Cap

Folkstone

611.8Q24.012.007

SupaTop HH Cap

White

611.8Q25.013.001

SupaTop HH Cap

New Antique White

611.8Q4.012.004

SupaTop HH Cap

Black

611.8Q4.013.004

SupaTop HH Cap

Folkstone Grey

611.8Q4.013.007

Type

Star Screw Cap

Made of plastic

SupaTop HH Caps

1000 Pcs

Diameter (mm)

Fasteners Cover Caps

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.17

FastCap

Thickmess (mm)

Technical details

Diameter gauge (mm) or W x L (mm)

Fasteners

Fasteners FastCap Cover Caps

Finish

Item number

0.4

White

611.8Q24.225.001

0.4

Black

611.8Q24.225.002

FastCap

0.4

Folkstone Grey 611.8Q24.225.007

FastCap

0.4

Antique White

611.8Q24.225.005

FastCap

0.4

White

611.8Q24.218.001

FastCap System 6 24 x 21

0.4

White

611.8Q24.614.001

FastCap System 6 24 x 21

0.4

Antique White

611.8Q24.614.004

FastCap System 6 24 x 21

0.4

Black

611.8Q24.614.002

FastCap System 6 24 x 21

0.4

Folkstone Grey 611.8Q24.614.007

Type

FastCap FastCap 25

400 Pcs

Made of PVC

FastCap

720 Pcs

Made of PVC

FastCap

480 Pcs

Made of PVC

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.18

FastCap

1040 Pcs

Thickmess (mm)

Technical details

Diameter gauge (mm)

Fasteners FastCap Cover Caps

Finish

Item number

0.4

Wenge

611.8Q24.214.037

0.4

Beech

611.8Q24.214.028

FastCap

0.4

Antique White

611.8Q24.214.004

FastCap

0.4

Black

611.8Q24.214.002

FastCap

0.4

Folkstone Grey

611.8Q24.214.007

FastCap

0.4

Pecan

611.8Q24.214.038

FastCap

0.4

Mahogany

611.8Q24.214.039

FastCap

0.4

White

611.8Q24.214.001

Type

FastCap FastCap

Made of PVC

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.19

FastEdge Edge Tape

15m roll (611.8Q24.222.151) 76m roll (611.8Q24.222.761) FastCap Speed Tape

Item number

EdgeTape

0.4

611.8Q24.222

151

EdgeTape

0.4

611.8Q24.222

761

FastCap Speed Tape

0.4

611.8Q24.225

151

White

Type

Thickmess (mm)

Technical details

Width (mm)

Fasteners

Fasteners FastEdge and Accessories

Made of PVC

15m roll FastCap Hole Punch Kit

FastCap Hole Punch Pro Kit

611.8Q24.213.000

FastCap Accuscribe Pro

611.8Q24.203.000

1 Kit FastCap Accuscribe Pro

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

4.20

Fasteners

Conversion Tables Pilot Hole Detail Screw Gauge Imperial

Metric

Pilot Hole MDF

Pilot Hole Partical Board

3.2

2.4mm

1.45mm

3.5

2.6mm

1.6mm

3.8

2.7mm

1.65mm

4.2

3.0mm

1.95mm

4.5

3.3mm

2.1mm

Metric â&#x20AC;&#x201C; Imperial Conversion Imperial Gauge

Exact Metric Equivalent

Nominal Metric Equivalent

2.5

2.8

3.0

3.2

3.0

3.5

3.8

4.0

4.2

4.0

4.5

10g

4.8

5.0

12g

5.5

14g

6.2

6.0

Metric â&#x20AC;&#x201C; Imperial Conversion Imperial

Metric

Imperial

Metric

1/32

0.8

17/32

13.5

1/16

1.6

9/16

14.3

3/32

2.4

19/32

15.1

1/8

3.2

5/8

15.9

5/32

21/32

16.7

3/16

4.8

11/16

17.5

7/32

5.6

23/32

18.3

1/4

6.4

3/4

19.1

9/32

7.1

25/32

19.8

5/16

13/16

20.6

11/32

8.7

27/32

21.4

3/8

9.5

7/8

22.2

13/32

10.3

29/32

7/16

11.1

15/16

23.8

15/32

11.9

31/32

24.6

1/2

12.7

25.4

4.21

General Hardware & Tools

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.1

General Hardware and Tools Product guide

Cabinet Hardware Page

Bed Fittings

5.3

Joiners and Connectors

5.4

Brackets

5.5

Cable Entry Grommets

5.6

Castors

5.7

Door Catches and Latches

5.9

Clips

5.12

Bump-ons, Protectors and Glides

5.13

Shelf Supports

5.17

Furniture Locks Page

5.1

Cylinder Locks

5.19

Striker Plates

5.23

Espagnolette Locks

5.24

Central Locking Systems

5.25

General Hardware & Tools Page

Waste Plates

5.26

Drill Bits

5.27

Saw Blades

5.30

Files

5.31

Tool Storage

5.31

LIquid Laminate

5.32

Repair Crayons

5.33

Fillers

5.34

Stan the Stand

5.35

Safety Materials Page

Nuisance Dust Mask

5.36

Disposable Respirators

5.36

Disposable Ear Plugs

5.36

5.2

Bed Bracket

1 Set

Length (mm)

Cabinet Hardware Bed Fittings

Item number

120

605.8B22.192.000

Made of steel

Bed Fittings for Water Beds

1 Set

605.8B22.190.000

Made of steel

Bed Fitting Centre Rail

1 Set

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.3

605.8B22.191.000

Benchtop Connector, ∅35mm

100 Pcs

118

605.8A24.080.000

605.8A24.118.730

∅25mm 85

605.8A24.025.025

∅35mm 85

605.8A24.085.035

Made of plastic and metal

Wood Joiner Biscuits

1 Box

1.65

Made of plastic

Zipbolt Benchtop Connector

250 Pcs

605.8A24.035.065

Made of steel

Benchtop Connector Plate, Black

350 Pcs

Item number

Made of steel

Steel Figure 8 Joiner

100 Pcs

Width (mm)

Length (mm)

General Hardware & Tools

Cabinet Hardware Joiners and Connectors

No. 0

605.8A26.021.000

No. 5

605.8A26.021.050

No. 10

605.8A26.021.010

No. 20

605.8A26.021.020

Made of MDF

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.4

1000 Pcs/Bag (605.8A26.025.025) 250 Pcs/Bag (605.8A26.038.038) 200 Pcs/Bag (605.8A26.050.050)

Width (mm)

Angle Brackets, Zinc Plated

Length (mm)

Cabinet Hardware Bracket

Item number

605.8A26.025.025

605.8A26.038.038

605.8A26.050.050

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.5

Cable Entry Grommets

1 Pce

Item number

White

605.8A30.060.001

Black

605.8A30.060.002

Beige

605.8A30.060.003

Cream

605.8A30.060.004

Silver Grey

605.8A30.060.016

Dove Grey

605.8A30.060.007

White

605.8A30.080.001

Black

605.8A30.080.002

Beige

605.8A30.080.003

Cream

605.8A30.080.004

Grey

605.8A30.080.007

Silver Grey

605.8A30.080.016

White

605.8A31.035.001

Made of plastic

Cap Holes

1 Pce

Colour

Diameter (mm)

General Hardware & Tools

Cabinet Hardware Cable Entry Grommets and Cap Holes

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.6

Castor, Unhooded with Socket

1 Set

Made of plastic and steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.7

605.8A50.402.000

605.8A50.422.000

605.8A50.503.000

605.8A50.504.000

Made of plastic and steel

Castor, Hooded Heavy Duty with Brake

1 Pce

Made of plastic and steel

Castor, Hooded Heavy Duty without Brake

1 Pce

Item number

Made of plastic and steel

Castor, Hooded without Brake

1 Pce

Wheel diameter (mm)

Cabinet Hardware Castors

Wheel diameter (mm)

General Hardware & Tools

Cabinet Hardware Castors

Castor, Swivel, 30kg

.501.001

With brake 50

605.8A50.501.001

Without brake 50

605.8A50.502.001

605.8A50.801.002

With brake 80

605.8A50.803.000

Without brake 80

605.8A50.802.002

.502.001

1 Pce

Made of rubber

Castor, Heavy Duty Rigid, 200kg

1 Pce

Made of plastic

Castor, Heavy Duty Swivel, 200kg

.802.002

1 Pce

Item number

.803.000

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.8

Cabinet Hardware Door Catches and Latches

Item number

605.8A36.010.000

Double Ball Catch

10 Pcs

Made of brass 605.8A36.010.010

Gripper Catch

100 Pcs

Made of steel and plastic 605.8A36.010.020

Roller Catch

100 Pcs

Made of zinc 605.8A36.020.001

Daisy Inline Catch

50 Pcs

Made of plastic 605.8A36.025.001

Daisy Side Mount Catch

50 Pcs

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.9

White

General Hardware & Tools

Cabinet Hardware Door Catches and Latches

Item number

Mini Touch Latch

50 Pcs

030

605.8A36.030

001

605.8A36.030

002

Made of plastic

Corna Top Mount Catch

150 Pcs

Made of steel and plastic

Corna Side Bi-fold Door Catch

25 Pcs

605.8A36.010

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.10

Cabinet Hardware Door Catches

Item number

605.8A36.030.003

Corna Slide Door Protector Catch

25 Pcs

Made of plastic White 605.8A36.040.061

Magnetic Catch, 6kg

Brown 605.8A36.040.064 Includes steel striker plate

.040.064

100 Pcs

Made of steel and plastic 605.8A36.040.000

Catch Striker Plate

To use with magnetic catch

1 Pce

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.11

General Hardware & Tools

Cabinet Hardware Clips

Table Clip

1000 Pcs

Gold zinc plated

605.8A32.365.185

60mm

Zinc plated

605.8A32.500.000

4mm

Clear plastic

605.8A32.500.050

50 x 16 x 20

White

605.8A36.056.080

White

605.8A36.010.040

Made of plastic

Door Stop with Clip

1 Pce

3.65 x 1.85

Made of plastic

Cleat Easy Clip Connector

100 Pcs

Item number

Made of steel

Mirror Clip

250 Pcs

Colour

Made of steel

Playground Clip

250 Pcs

Size (mm)

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.12

450 Pcs/Card, 12 Cards/Box (605.8A28.079.022, 605.8A28.085.022) 200 Pcs/Card, 25 Cards/Box (All others)

Item number

605.8A28.000.030

1.5

605.8A28.000.015

2.2

7.9

605.8A28.079.022

2.2

8.5

605.8A28.085.022

4.8

9.5

605.8A28.095.048

1.5

12.7

605.8A28.127.015

3.8

12.7

605.8A28.127.038

605.8A28.000.003

Made of plastic

White Bump On

125 Pcs/Card, 8 Cards/Box

Diameter (mm)

Clear Bump On

Thickness (mm)

Cabinet Hardware Bump ons

Made of foam

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.13

100 Pcs

Natural

605.8A36.045.200

Natural

605.8A36.060.600

White

605.8A36.054.001

White

605.8A36.050.001

Made of plastic

Corner Protector Glide

100 Pcs

Item number

Made of plastic

Corner Protector Glide, 45ยบ

5000 Pcs/Bag

Width (mm)

Corner Block

Colour

Length (mm)

General Hardware & Tools

Cabinet Hardware Corner Protectors and Glides

Made of PVC

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.14

Tack-on Glide

10000 Pcs

Beige

605.A850.016.000

Beige

605.A850.019.000

Black

605.A850.038.002

Made of plastic

Snap-off Furniture Wedge

100 Pcs

Item number

Made of plastic

Carpet Glide, Screw-on

1300 Pcs

Finish

Width (mm)

Cabinet Hardware Corner Protectors and Glides

Brown

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.15

605.A850.600.004

Length (mm)

General Hardware & Tools

Cabinet Hardware Plinths and Glides

Item number

605.8A50.510.050

3/8 thread 50

605.8A50.538.025

5/16 thread 50

605.8A50.516.025

5/16 thread 50

605.8A50.516.050

Adjustable Plinth Foot Glide with Bracket and Cap

200 Pcs

Made of zinc-plated steel

Adjustable Plinth Stem Glide

1000 Pcs

Made of steel and plastic

Adjustable Glide Stem, Ă&#x2DC;28mm Base

1 Pce

Made of steel and plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.16

Shelf Support, Flat

1000 Pcs (605.8A38.119.650, 5000 Pcs)

605.8A38.119.650

Brass Bush

605.8A38.180.010

Nickel Plated

7.5

605.8A38.119.750

Nickel plated

7.5

605.8A38.175.651

Brass Pin

605.8A38.180.020

605.8A38.214.650

Clear

605.8A38.210.830

White

605.8A38.210.877

Nickel plated

605.8A38.216.650

Made of steel

Made of steel and plastic

Shelf Support

1000 Pcs

15 x 20mm Nickel plated

Shelf Support with Safety Pin

1000 Pcs

Nickel Plated

Made of steel

Shelf Support with Safety Pin

1250 Pcs

Item number

Made of steel

Shelf Support Bush

1000 Pcs

Finish

Diameter (mm)

Cabinet Hardware Shelf Supports

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.17

Shelf Support, Rock-in

1000 Pcs

605.8A38.218.650

Nickel plated

605.8A38.220.650

Without Grommets Clear

605.8A60.104.030

With Grommets Clear

605.8A60.104.020

Without Grommets Clear

605.8A60.106.030

With Grommets Clear

605.8A60.106.020

.104.020

50 Pcs

Made of plastic

End Clips

50 Pcs

Nickel plated

Made of steel and plastic

Centre Clips

.106.030

Item number

Made of steel

Shelf Support for Glass

.104.030

Finish

Diameter (mm)

General Hardware & Tools

Cabinet Hardware Shelf Supports

.106.020

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.18

Furniture Locks Cylinder Lock • • •

Screw-on mounting on drawer front or door Left and right hand version available 800 key combinations

Left-hand

3.5 3.5

Item number

104.7416.850

combinations combinations 104.7413.850

104.7417.850

104.7414.850

800 800

9.5

Left Left

Drilling distance

Right Right

Right-hand

Item number

Ø 17 42

3.5

Lock

1 pce

Rosette

1 pce

Key

1 pair

Ø 17

9.5

Ø 17

One set consists of

Mounting details 3

19.5

Ø17

9 25

Ø18

Ø18 22

art.110

19.5

30/35

Cylinder drilling distance can be adjusted adjustment range: 15-40mm

3.5 3.5

art.104

3.5 9

max.22

19.5

Ø17

9.5

100 Sets 22

7.5

D 17

40 Chipboard screws for fixing 611.8K16.240.020

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.19

3.5

3 3.5

Ø 17

57 3

9.5

3.5

•

Compact design for use on small furniture elements Screw-on mounting on door Left and right hand version available

42 16

•

Ø 17

9.5

Right-hand

Left-hand Left Right

Left

Ø 17

Right

Item number

800

110.7420.850

3.5 9 3.5

25 9

Item number

800

combinations

combinations 110.7421.850

Lock

1 pce

Rosette

1 pce

Key

1 pair

19.5

Ø17

19.5

One set consists of

22 40

3.5 9

19.5

Ø17

9.5

42 Assembly

Mounting details art.110

art.104

30/35

Ø18

max.22

ø17

100 Sets Chipboard screws for fixing 611.8K16.240.020

7.5 16

7.5

40 20

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.20

General Hardware & Tools

Furniture Locks Cylinder Lock

601 Rim Lock Housing with Barrel and Key

Nickel Plated

Furniture Locks Cylinder Locks

Lock type

Key type

Keyed

Item number

Rim

Barrel

Alike

605.8B10.601

001

Rim

Barrel

Alike

605.8B10.601

002

Rim

Barrel

Alike

605.8B10.601

003

Rim

Barrel

Alike

605.8B10.601

004

Rim

Barrel

Alike

605.8B10.601

005

Rim

Barrel

Alike

605.8B10.601

006

Rim

Barrel

Alike

605.8B10.601

007

Rim

Barrel

To Differ

605.8B10.601

000

Double Door Rim

Barrel

Alike

605.8B10.628

003

Double Door Rim

Barrel

Alike

605.8B10.628

001

Double Door Rim

Barrel

Alike

605.8B10.628

002

Double Door Rim

Barrel

To Differ

605.8B10.628

000

Push

Barrel

Alike

605.8B10.604

001

Push

Barrel

Alike

605.8B10.604

002

Push

Barrel

To Differ

605.8B10.604

000

1 Set 628 Double Door Lock Housing with Barrel and Key

1 Set 604 Push Lock Housing with Barrel and Key

1 Set Download supporting documentation from the Titus Tekform website titustekform.com.au

5.21

General Hardware & Tools

Furniture Locks Cylinder Locks

611 Push Lock Housing with Barrel and Key

Lock type

Key type

Keyed

Item number

Cam

Barrel

Alike

605.8B10.611.001

Cam

Barrel

Alike

605.8B10.611.002

Cam

Barrel

Alike

605.8B10.611.003

Cam

Barrel

Alike

605.8B10.611.004

Cam

Barrel

Alike

605.8B10.611.005

Cam

Barrel

To Differ

605.8B10.611.000

Cam

Barrel

Alike

605.8B10.215.000

Master Key Cam

Barrel

605.8B10.205.000

Removable Key Cam

Barrel

605.8B10.200.000

1 Set CC Series Lock with Removable Barrel, Keyed Alike

1 Set Download supporting documentation from the Titus Tekform website titustekform.com.au

5.22

Furniture Locks Striker Plates

Item number

Right Angle Lock Striker Plate, 30mm

1 Pce

605.8B10.600.030

Made of steel

Standard Z Striker Plate for Double Door

1 Pce

605.8B10.600.020

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.23

General Hardware & Tools

Espagnolette Lock with Rotating Bar Screw-on mounting on door Left and right hand version available

• •

Left-hand

Right-hand RightLeft

Right

Left

Item number

800 800

156.7430.850 9

combinations 156.7431.850

combinations

8 8

1 Pce D = 8mm 1 Pce D =18mm 30

Striking plate

AA 11

Ø18

1 Pce L 1 Pce R

Hook (L+R)

30 9

Rotating bar L=1000mm

ØØ2 2

Item number

min. min.5 5

Bar length A = A1 - 37 B = B1 - 37

190.2646.050.00

B1 BB B 1 30

Ø18

Ø19-Ø20 Ø19-Ø206464

4 Pcs 22

Bar guide

7.5 16

Chipboard screws for fixing 611.8K16.240.020

100 Sets

7.5 20

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.24

1 Pce L 1 Pce R

Ø18

Mounting details 8

Assembly

Staple (L+R)

Ø18

1 Pair

Ø18

Key

Ø18

1 Pce

Rosette

8 9

1 pce

Lock

Ø18

One set consists of

Central Locking System • •

Furniture lock with cylinder Screw-on mounting in front panel

600

One set consists of

Lock

1 pce

Rosette

1 pce

Key

1 pair

600

Ø18

Lock 167.7440.850

Accessories 167.7449.050 Ø18

Ø18

32Item number

600

Assembly

Mounting and drilling details

32 32 20

min. Ø19-Ø20

min. 24

bar guide

600

bar

21-30

One set accessories consists of

Bar guide

3 pcs

Locking pin

3 pcs

Bar L= 600mm

1 pce

600

22-25mm

adjustment pin

100 Sets

Made of steel

Chipboard screws for fixing 611.8K16.240.020 4

7.5

7.5 20

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.25

â&#x20AC;˘ â&#x20AC;˘

Corna Plumbing Waste Plates

10 Pcs (000.014, Pkt)

Cover for plumbing misplaced drilling Stick on around pipe to cover chips or oversized hole

Size

Item number

210 x 295mm

605.838.210.295

40mm

605.838.040.000

50mm

605.838.050.000

65mm

605.838.065.000

Various

605.838.000.014

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.26

General Hardware & Tools

Builders Hardware Waste Plates

Snappy Countersunk Drill Bit, Gold

Diameter (mm)

General Hardware & Tools Drill Bits

Item number

1/8

605.8T60.000.018

1 Pce Jobber Drill Bit

5/64

605.8T50.343.564

7/64

605.8T50.343.764

1/18

605.8T50.343.180

5/32

605.8T50.343.532

3/32

605.8T50.343.332

PH1

605.8T10.125.000

PH2

605.8T10.225.000

PH1

605.8T10.150.000

PH2

605.8T10.250.000

1 Pce Philips Head Drill Bits

10 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

5.27

Diameter (mm)

General Hardware & Tools

General Hardware & Tools Drill Bits

Pozidrive Drill Bit

Item number

PZ2 25

605.8T10.325.000

PZ2 50

605.8T10.350.000

PH2 152

605.8T10.205.000

10 Pcs Power Drill Bit

1 Pce Tungsten Drill Bits, 57mm

.257.010

.157.105

1 Pce

.257.035

.157.008

.157.005

.157.108

Right-hand 5

605.8T40.157.105

Left-hand 5

605.8T40.157.005

Right-hand 8

605.8T40.157.008

Left-hand 8

605.8T40.157.108

Right-hand 10

605.8T40.257.010

Left-hand 10

605.8T40.157.010

Right-hand 35

605.8T40.257.035

Made of tungsten carbide

Magnetic Drill Bit Holder 605.8T10.000.000 Download supporting documentation from the Titus Tekform website titustekform.com.au

5.28

Twist Drill Bit, Imperial

Diameter (mm)

General Hardware & Tools Drill Twists

Item number

1/8

605.8T50.343.018

2.5

605.8T50.343.025

605.8T50.343.030

3.5

605.8T50.343.035

605.8T50.343.040

605.8T50.343.050

10 Pcs Drill Twists, Metric

10 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

5.29

General Hardware & Tools

General Hardware & Tools Saw Blades

Makita Jigsaw Blades, 5 pack

Teeth

Style

Cut direction

Item number

2.9

B10

Upward cut

605.8T41.010.000

2.8

B11

Upward cut

605.8T41.011.000

4.2

B12

Upward cut

605.8T41.012.000

2.1

B19

Downward cut

605.8T41.019.000

4.0

T144D Upward cut

1 Pkt Jigsaw Blades

605.8T40.144.000

1 Pkt Reversable Planer Saw Blade

605.8T35.000.050

1 Pkt Download supporting documentation from the Titus Tekform website titustekform.com.au

5.30

General Hardware & Tools Files

Item number

Handy Files

605.8T70.000.000

12 Pcs

Storage Boxes

Item number

Exacta Pack - Large 605.8T90.015.000 Multi 10 pack - Small 605.8T90.020.000

1 Pce

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.31

General Hardware & Tools

General Hardware & Tools Liquid Laminate

Liquid Laminate, 15ml

Colour

Item number

White

605.8L50.301.001

Black

605.8L50.301.002

Marl Beige

605.8L50.301.003

Antique White

605.8L50.301.004

Parchment

605.8L50.301.005

Charcoal

605.8L50.301.006

Folk / Oyster Grey

605.8L50.301.007

Alabaster

605.8L50.301.008

Classic Beige

605.8L50.301.009

Cuppacino

605.8L50.301.010

Mushroom Linea

605.8L50.301.011

Oyster Linea

605.8L50.301.012

Paperbark

605.8L50.301.013

Silver Grey

605.8L50.301.014

Stone Beige

605.8L50.301.015

Select Beech

605.8L50.301.028

Young Beech

605.8L50.301.036

Wenge

605.8L50.301.037

1 Pkt Download supporting documentation from the Titus Tekform website titustekform.com.au

5.32

General Hardware & Tools Repair Crayons

• • •

Repair Crayons

12 crayons in each pack Available in a variety of colours Hide small damage done to furniture

Colour

Item number

Various Colours

605.8L50.300.000

White

605.8L50.300.001

Black

605.8L50.300.002

Marl Beige

605.8L50.300.003

Antique White

605.8L50.300.004

Parchment

605.8L50.300.005

Gunmetal

605.8L50.300.006

Folk/Oyster Grey

605.8L50.300.007

Ironstone

605.8L50.300.008

Baltic Pine

605.8L50.300.010

Birch

605.8L50.300.012

Cherry

605.8L50.300.014

Dark Teak

605.8L50.300.016

Dark Walnut

605.8L50.300.018

Graceful Oak

605.8L50.300.020

Jarrah

605.8L50.300.022

Light Teak

605.8L50.300.024

Red Cherry

605.8L50.300.026

Select Beech

605.8L50.300.028

Tasmanian Oak

605.8L50.300.030

Walnut

605.8L50.300.032

Wild Birch

605.8L50.300.034

Young Beech

605.8L50.300.036

12 Pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

5.33

• • •

Timbermate Filler

Water-based 4-in-1 Woodputty, Grainfiller, Edgefiller and Crackfiller Non-flammable, non-toxic and can be used to the last gram

Size (kg)

Colour

Item number

Ebony

605.8L50.302.202

Hardwood

605.8L50.302.203

Hardwood

605.8L50.302.803

Oak

605.8L50.302.230

Pine

605.8L50.302.210

Pine

605.8L50.302.810

Teak

605.8L50.302.224

Walnut

605.8L50.302.232

White

605.8L50.302.201

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

5.34

General Hardware & Tools

General Hardware & Tools Filler

General Hardware & Tools Stan the Stand â&#x20AC;˘ â&#x20AC;˘

For tradesman usage Materials handling

Item number

Stan the Stand

605.8T90.000.000 Extension Kit 605.8T90.005.000 PVC Covers 605.8T90.010.000

1 Pair Download supporting documentation from the Titus Tekform website titustekform.com.au

5.35

General Hardware & Tools

General Hardware & Tools Safety Materials

Item number

Nuisance Dust Mask

605.8T90.035.000

50 Pcs Disposable Respirator with Valve, 12 pack

605.8T90.040.000

1 Box Pro-plug Disposable Ear Plugs, Uncorded, 200 Pair

605.8T90.045.000

1 Box Download supporting documentation from the Titus Tekform website titustekform.com.au

5.36

x.1

Edgebanding

x.2

Edgebanding Information

EdgEdgebanding Colour Options

6.1

Oyster Linea

Latte Sheen

Parchment

Mocha Sheen

Polar White

Oyster Grey

Tekform White

Latte

Alabaster Sheen

Mocha

Off White

Espresso

Alabaster

Salt Wash Sheen

New Antique White

Limed Oak Woodgrain

Off White Woodgrain

Salt Wash Fineline

Designer White Woodgrain

Finni Wenge

Classic White

Nordic Birch

Brushed Silver

Charred Oak

Black

Young Beech

Sandstone Sheen

Charcoal

Ironstone

Latte Woodgrain

Edgebanding ABS Edgeband • • • •

Thickness (mm)

ABS Edgeband

Width (mm)

Edgebanding

•

For Trade and Commercial use Available in ABS, Melamine and PVC Option of pre-glued or unglued Unglued edging perfect to use with our range of Keliberit adhesives Textured, satin and stipple finish options

Glue

Item number

Un-glued

609.8A04.521.100

Un-glued

609.8A04.622.100

Texture

Un-glued

609.8A03.321.100

Black

Texture

Un-glued

609.8A02.321.100

Brushed Silver

Texture

Un-glued

609.8A08.321.100

Charred Oak

Matt

Un-glued

609.8A16.521.100

Chestnut Woodgrain

Texture

Un-glued

609.8A19.321.100

Classic White

Matt

Un-glued

609.8A24.521.100

Designer White

Grain

Un-glued

609.8A32.421.100

Espresso

Texture

Un-glued

609.8A34.321.100

Finni Wenge

Matt

Un-glued

609.8A38.521.100

Latte

Matt

Un-glued

609.8A44.521.100

Latte Sheen

Gloss

Un-glued

609.8A44.622.100

Latte Woodgrain

Grain

Un-glued

609.8A44.421.100

Limed Oak Woodgrain

Grain

Un-glued

609.8A47.421.100

Mocha

Matt

Un-glued

609.8A50.521.100

Mocha Sheen

Gloss

Un-glued

609.8A50.622.100

New Antique White

Matt

Un-glued

609.8A53.521.100

Nordic Birch

Matt

Un-glued

609.8A56.521.100

Off White

Matt

Un-glued

609.8A59.521.100

Off White Woodgrain

Grain

Un-glued

609.8A59.421.100

Oyster Grey

Matt

Un-glued

609.8A62.521.100

Saltwash Fineline

Grain

Un-glued

609.8A69.421.100

Saltwash Sheen

Gloss

Un-glued

609.8A69.622.100

Sandstone Sheen

Gloss

Un-glued

609.8A72.622.100

Colour

Finish

Alabaster

Matt

Alabaster Sheen

Gloss

Antique White

100 Metres per Roll 500 metres per carton

6.2

Edgebanding PVC Edgeband • • • •

100 metres per roll

22 x 2mm - 500 metres per carton 29 x 2mm - 400 metres per carton 38 x 2mm - 300 metres per carton

6.3

Thickness (mm)

PVC Edgeband

Width (mm)

•

For Trade and Commercial use Available in ABS, Melamine and PVC Option of pre-glued or unglued Unglued edging perfect to use with our range of Kleiberit adhesives Textured, satin and stipple finish options

Glue

Item number

Un-glued

609.8P02.216.100

Un-glued

609.8P02.322.200

Texture

Un-glued

609.8P02.329.200

Black

Texture

Un-glued

609.8P02.338.200

Brushed Silver

Texture

Un-glued

609.8P08.222.200

Brushed Silver

Texture

Un-glued

609.8P08.329.200

Brushed Silver

Texture

Un-glued

609.8P08.338.200

Charcoal

Texture

Un-glued

609.8P10.222.200

Charcoal

Texture

Un-glued

609.8P10.329.200

Charcoal

Texture

Un-glued

609.8P10.338.200

Dark Birch

Satin

Un-glued

609.8P45.122.200

Dark Birch

Satin

Un-glued

609.8P45.128.200

Ironstone

Texture

Un-glued

609.8P41.322.200

Ironstone

Texture

Un-glued

609.8P41.329.200

Ironstone

Texture

Un-glued

609.8P41.338.200

Modern Oak

Satin

Un-glued

609.8P60.128.200

New Antique White

Texture

Un-glued

609.8P03.322.200

New Graphite

Texture

Un-glued

609.8P54.222.200

New Graphite

Texture

Un-glued

609.8P54.329.200

New Graphite

Texture

Un-glued

609.8P54.338.200

Oyster

Texture

Un-glued

609.8P20.322.200

Oyster

Texture

Un-glued

609.8P20.329.200

Oyster Linea

Texture

Un-glued

609.8P66.322.200

Oyster Linea

Texture

Un-glued

609.8P66.329.200

Oyster Linea

Texture

Un-glued

609.8P66.338.200

Colour

Finish

Black

Texture

Black

Texture

Black

Edgebanding PVC Edgeband • • • •

Thickness (mm)

PVC Edgeband

Width (mm)

Edgebanding

•

Glue

Item number

Un-glued

609.8P28.322.200

Un-glued

609.8P28.329.200

Texture

Un-glued

609.8P28.338.200

Polar White

Texture

Un-glued

609.8P35.322.200

Polar White

Texture

Un-glued

609.8P35.329.200

Polar White

Texture

Pre-glued 609.8P35.329.201

Select Beech

Texture

Un-glued

609.8P70.322.200

Select Beech

Texture

Un-glued

609.8P70.329.200

White

Texture

0.4

Un-glued

609.8P01.321.040

White

Texture

Un-glued

609.8P01.321.100

White

Texture

Pre-glued 609.8P01.321.101

White

Texture

Un-glued

White

Texture

Pre-glued 609.8P01.322.201

White

Texture

Un-glued

609.8P01.329.200

White

Texture

Un-glued

609.8P01.138.200

Young Beech

Texture

Un-glued

609.8P30.322.200

Young Beech

Texture

Un-glued

609.8P30.329.200

Young Beech

Texture

Un-glued

609.8P30.338.200

Colour

Finish

Parchment

Texture

Parchment

Texture

Parchment

609.8P01.322.200

100 metres per roll

22 x 2mm - 500 metres per carton 29 x 2mm - 400 metres per carton 38 x 2mm - 300 metres per carton

6.4

Edgebanding Melamine Edging • • • •

250 mtr, un-glued 150 mtr, pre-glued 3000 mtr, un-glued 1800 mtr, pre-glued

6.5

Finish

Thickness (mm)

Melamine Edgeband

Colour

Width (mm)

•

Glue

White

Texture

0.32

Pre-glued 609.8M01.221.031

White

Texture

0.32

Un-glued

Item number

609.8M01.221.030

Edgebanding FastEdge PVC Edgeband • •

Finish

Thickness (mm)

Pre-glued FastEdge PVC Edgeband

Colour

Width (mm)

Edgebanding

•

Peel and stick edgeband Industry standard Cost saving

Glue

White

Texture

0.4

Pre-glued 609.8F01.022.041

White

Texture

0.4

Pre-glued 609.8F01.222.041

Item number

15m (609.8F01.022.041) 76m (609.8F01.222.041)

6.6

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.1

Abrasives

Abrasives & Adhesives

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.2

Abrasives and Adhesives Product guide

Abrasives Page

7.1

Abrasive Rolls

7.3

Abrasive Belts

7.4

Abrasive Sheets

7.4

Abrasive Discs

7.5

Abrasive Sponges

7.6

Adhesives Page

Hotmelt Glues

7.7

PVA Adhesives

7.10

Laquer and Hardeners

7.12

PUR Adhesives

7.13

Construction and Contact Adhesives

7.14

Primers and Cleaners

7.16

Adhesive Tape

7.18

7.2

Abrasives Abrasive Roll for Sanding •

• • •

Abrasive Roll for Sanding

Antistatic and semi-open structure reduces the risk of loading Stable and ﬂexible e-weight paper backing Suitable for sanding all types of veneer and solid wood Ideal for sanding different materials without changing the belt

Grit

Length (mtr)

Width (mm)

Item number

100

601.8C10.060

100

601.8C10.080

100

601.8C10.100

120

100

601.8C10.120

150

100

601.8C10.150

115

601.8C15.060

115

601.8C15.080

100

115

601.8C15.100

120

115

601.8C15.120

150

115

601.8C15.150

180

115

601.8C15.180

240

115

601.8C15.240

320

115

601.8C15.320

1 Roll

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.3

Abrasives

Abrasives Abrasive Belts and Sheets for Sanding

Abrasive Belts for Sanding

Grit

Width (mm)

Length (mm)

Item number

100

610

601.8C61.040

100

610

601.8C61.060

100

610

601.8C61.080

100

610

601.8C61.100

120

100

610

601.8C61.120

150

100

610

601.8C61.150

180

100

610

601.8C61.180

240

100

610

601.8C61.240

280

230

601.8C62.060

280

230

601.8C62.080

120

280

230

601.8C62.120

150

280

230

601.8C62.150

180

280

230

601.8C62.180

240

280

230

601.8C62.240

320

280

230

601.8C62.320

400

280

230

601.8C62.400

1 Belt Abrasive Sheets for Sanding

100 Pcs (060, 080 & 120, 50 Pcs)

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.4

Abrasives Abrasive Velcro Discs • • •

Abrasive Velcro Disc for Sanding

Good stock removal rate even at low sanding pressure Economical sanding of all types of wood Suitable for sanding all types of veneer and solid wood

Grit

Diameter (mm)

Holes

Item number

120

150

No holes

601.8C17.120

240

150

No holes

601.8C17.240

320

150

No holes

601.8C17.320

150

601.8C18.080

120

150

601.8C18.120

180

150

601.8C18.180

240

150

601.8C18.240

320

150

601.8C18.320

400

150

601.8C18.400

150

601.8C19.080

100

150

601.8C19.100

120

150

601.8C19.120

150

601.8C19.150

180

150

601.8C19.180

240

150

601.8C19.240

320

150

601.8C19.320

400

150

601.8C19.400

100 Pcs 50 Pcs (601.8C18.080, 601.8C19.080)

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.5

Abrasives Abrasive Sponges •

• • •

Abrasives

•

Fine sanding of wood in preparation for staining and lacquering Intermediate sanding of primers and lacquers Fine cleaning of oxide layers from metallic surfaces For highly profiled and contoured workpieces Can be used wet or dry

Abrasive Sponge for Sanding, Double-sided

Grit

Length (mm)

Width (mm)

Thickness (mm)

Item number

180

123

601.8C16.060

•

High degree of flexibility and adaptability

20 Pcs Abrasive Sponge for Sanding, Single-sided

180

115

140

601.8C16.180

280

115

140

601.8C16.280

•

Medium degree of flexibility

20 Pcs

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.6

Adhesives Hotmelt Glue •

•

Hotmelt Glue 707.7 PUR

Weight

Item number

Natural

•

240g

607.8B01.707 >

720

• •

•

Clear

Hotmelt adhesives react with moisture from the material to be bonded For furniture production, automotive industry and paper processing A wide variety of assembly bonds from proﬁle wrapping to edgebanding Use suitable machines, lines and equipment

•

Reactive Hotmelt with invisible glue line To use with high quality edge banding on HOLZ-HER edge banding machines with cartridge systems Works well with solid wood edges, HPL edges in strips, PVC edges, extruded/calandered, veneer edges, Duroplastic and thermoplastic edges Excellent green strength

6 Canisters Hotmelt Glue 753.5

20kg • • • •

601.8B01.753 >

520

To use with high speed edge banders Suitable for all edging materials Works well with paper, veneer and melamine Very high green strength

1 Bag Hotmelt Glue 773.0

20kg •

• • •

601.8B01.773 >

020

Bonding of polyester edges, CPL and melamine resin edges, PVC and ABS edges (primed), uncompressed resin-impregnated paper edges and veneer and plastic edges on machining centres Excellent dosing and high strength. Free of fillers Good melting properties.

1 Bag Hotmelt Glue 773.3

20kg • • • • • • •

601.8B01.773 >

Suited for application on CNC and regular edgebanders Excellent melting properties Outstanding high green strength No stringing Good adhesion to HPL Transparent, invisible glue line Excellent adhesion to PVC, veneer, ABS, PP and solid wood.

1 Bag Download supporting documentation from the Titus Tekform website titustekform.com.au

7.7

320

Hotmelt Glue 773.7

Item number

20kg

601.8B01.773 >

725

•

• • •

White

Weight

Natural

Adhesives

Adhesives Hotmelt Glue

To use with common commercial edgebanders Excellent dosing Good melting properties High green strength

1 Bag Hotmelt Glue 774.4

25kg

601.8B01.774 >

25kg

601.8B01.774 >

•

• • • •

1 Bag Hotmelt Glue 779.6

601.8B01.779 >

25kg

601.8B01.779 >

•

125

To use with common commercial edgebanders Universal use Suitable for pre-cooling of edges Good ongoing resistance Good melting properties

25kg

•

025

625 725

To use with slow operating edgebanders Good flowing property from storage bin to pressing cylinder- fast re-melting Good water and aging resistance

1 Bag Hotmelt Glue 782.1

25kg • • •

601.8B01.782 >

125

To use with slow operating edgebanders Can be used as cartridge or granules Good water and aging resistance

1 Bag Download supporting documentation from the Titus Tekform website titustekform.com.au

7.8

Adhesives Hotmelt Glues

Supramelt Hotmelt Glue 782.5

Weight (kg)

Item number

601.8B01.782

•

1 Bag

•

Black

•

Clear

•

White

•

Natural

•

525

To use with slow operating edgebanders Can be used as cartridge or granules Good water and aging resistance

1 Bag Hotmelt Glue 788 Series

788.0 25

601.8B01.788

788.0 25

601.8B01.788

225

788.7 25

601.8B01.788

025

788.7 25

601.8B01.788

788.3 for hand-held machine 25

601.8B01.788

• •

1 Bag Supramelt Glue Slugs 782

725 325

Excellent heat stability and bonding strength Designed especially for edge banding

15.3

601.8B01.782

•

125

615 715 015

Bonding of epoxy resin edges, pre-primered ABS edges, solid wood edges, polyester edges, preprimered PVC-edges and veneer edges

1 Box Supramelt Glue Slugs 782.5

11 • • •

601.8B01.782

To use with slow operating edgebanders Can be used as cartridge or granules Good water and aging resistance

1 Box Download supporting documentation from the Titus Tekform website titustekform.com.au

7.9

511

Adhesives PVA Adhesives •

•

Adhesives

•

Sealants cure through cross linking of the polymers with moisture in the air. Used for sealing construction joints, glazing, tile work and connecting different materials. Very elastic with high mechanical strength. Use in the construction, automotive and caravan industries

Weight / Capacity

Crosslinking PVA

Item number

303.0 0.5kg

601.8B05.303.000

303.0 5kg

601.8B05.303.005

303.0 10kg

601.8B05.303.010

303.0 28kg

601.8B05.303.028

303.0 220kg

601.8B05.303.220

347.3 28kg

601.8B05.347.328

•

1 Pce Melamine Adhesive 303

High quality, general purpose crosslinking PVA adhesive

601.8B20.303.005

20L

601.8B20.303.020

•

Typically used to bond end grain to melamine face in the manufacture of cabinets, cupboards and drawers

1 Drum PVA 305

10kg •

601.8B05.305.010

High quality, general purpose woodworking PVA adhesive

1 Drum Download supporting documentation from the Titus Tekform website titustekform.com.au

7.10

Adhesives PVA Adhesives •

•

• •

Sealants cure through cross linking of the polymers with moisture in the air Used for sealing construction joints, glazing, tile work and connecting different materials Very elastic with high mechanical strength Use in the construction, automotive and caravan industries

PVA Woodworking Adhesive 302

Size

Item number

601.8B05.302.005

20L

601.8B05.302.020

•

High quality, general purpose woodworking PVA adhesive

1 Drum Sandable PVA 304

5L •

601.8B05.304.005

A fast setting PVA with good moisture resistance which attains a high bond strength after a short setting time

1 Drum MDF and Timber PVA Adhesive 301

601.8B25.301.005

20L

601.8B25.301.020

•

1 Drum Download supporting documentation from the Titus Tekform website titustekform.com.au

7.11

A yellow, fast setting PVA used for bonding a wide range of timber & boards (especially MDF)

Adhesives

Adhesives Lacquer and Hardener

Super Lacquer 308.0

Weight

Item number

0.5kg

601.8A60.308.500

4.5kg

601.8A60.308.450

â&#x20AC;˘

For bonding wood and wood based materials to lacquered and plastic coated surfaces Ideal for use in furniture manufacturing or D.I.Y projects where wood based materials are to be bonded to pre-lacquered surfaces, plastic laminates and melamine coatings

1 Bottle Turbo Hardener 303.5

0.5kg

601.8A60.303.000

Hardener component for the Kleiberit D-3 adhesive 303.0 and 303.2

1 Bottle Download supporting documentation from the Titus Tekform website titustekform.com.au

7.12

Adhesives PUR Adhesive •

•

PUR adhesives cure through cross linking with moisture from the air and the substrate Extremely strong bonds that are temperature and water resistant Use for especially difﬁcult to bond materials like stone and plastics Add a hardener (catalyst) for desired bonding properties

PUR Adhesive 501.0

Weight (kg)

Item number

0.5

601.8B10.501.005

•

• • • • •

Adhesive for water resistant bonding according to DIN/EN 204 standards Humidity curing singlecomponent reaction adhesive based on polyurethane Handy bottle with patented dispensing lid Self cleaning Easy to dispense Precise adhesive application Open time approx. 25 min Curing time 2-3 hours

1 Bottle PUR Adhesive 501.6

0.5 •

•

• • • • •

1 Bottle Download supporting documentation from the Titus Tekform website titustekform.com.au

7.13

601.8B10.501.605

Adhesive for water resistant bonding according to DIN/EN 204 standards Humidity curing singlecomponent reaction adhesive based on polyurethane The handy bottle has a patented dispensing lid Self cleaning Easy to dispense Precise adhesive application Open time approx. 70 min Curing time 1 day

Construction Adhesive 569

Item number

325g

601.8B30.569

• • •

325

020

Red

Size

Clear

Adhesives

Adhesives Construction and Contact Adhesives

Fills gaps Simple application Slightly foaming

6 Pcs Brushable Contact Adhesive 205

20L •

601.8B10.205

A clear heat resistant adhesive formulated to be applied by brush or roller. Bonds decorative laminate, auto upholstery, thermal pipe insulation and more

1 Drum Premium Spray Contact Adhesive 203

200L

601.8A12.200

200L

601.8A10.200

20L

601.8A12.020

20L

601.8A10.020

•

000 000 000 000

A high heat resistant, high solids adhesive used to bond decorative laminates, auto upholstery and many other materials

1 Drum Download supporting documentation from the Titus Tekform website titustekform.com.au

7.14

Adhesives Construction and Contact Adhesives

Tensorgrip L17 Aerosol Adhesive

Size

Item number

500ml

601.8B40.017.482

•

CLASS-1 FIRE RATED web spray adhesive Suitable for bonding metal sheeting, standard laminates, FRL, FRP/GRP and plasterboard

1 Pce Super Strength Epoxy Adhesive

30ml •

601.8B40.020.003

These adhesive are based on resins and hardeners reacting to create an extremely stable thermosetting plastic after cross linking. The strength values of the bond can be increased through targeted addition of heat during curing

1 Kit Mitre Mate Bonding Kit

50g adhesive 200ml activator •

•

Quick, no-mess method for bonding mitre joints in many materials Bonds MDF, wood, most plastics, rubber, leather, cork and most metals Two part bonding kit to replace traditional fittings such as screws and nails

1 Kit

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.15

601.8B40.024.000

Abrasives

Adhesives Construction and Contact Adhesives

Construction Adhesive

Size

Item number

300g

601.8A40.047.064

•

• •

Multi-purpose construction adhesive ideal for bonding most common construction materials Repositionable for up to 20 minutes after application Effective when used on uneven floors Fast drying

20 Pce Gap Filler

450g •

• • •

601.8A40.045.001

Acrylic based gap filler ideal for filling gaps Easy to apply Interior/exterior Water clean up

20 Pce

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.15A

Adhesives Silicone Sealants

740 Bath & Kitchen Silicone Sealant

Finish

Weight (gm)

Item number

Clear

300

601.8B10.501.005

White

300

601.8A40.740.001

•

• •

Specifically designed for use in sealing applications involving non-porous surfaces commonly found in bathrooms, kitchens and laundries Contains fungicide that resists mould and mildew Permanently flexible: +/-25% joint movement capability Acetic cure Seals water tight

20 pcs 770 Sanitary Silicone Sealant

Clear

300

601.8A40.770.000

Clear

300

601.8A40.770.001

• •

•

• •

Specifically designed for use in wet areas Primerless adhesion to the widest range of surfaces Contains fungicide that resists mould and mildew Permanently flexible: +/-25% joint movement capability Neutral cure - will not corrode metal or concrete Strong adhesion Suitable for contact with aluminium shower screens

20 pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

7.15B

Adhesives

Adhesives Silicone Sealants

300 Glazing & Industrial Silicone Sealant

Finish

Weight (gm)

Item number

Clear

300

601.8A40.300.000

•

• • • • • •

Premium grade silicone sealant specifically formulated for use in glazing and industrial fabrication Fast skinning Low sag Low shrinkage Neutral cure UV & weather resistant Low VOC

20 pcs 790 Mirror & Metal Silicone Sealant

Clear •

•

• • •

300

601.8A40.790.000

Specially formulated for a range of sealing uses Ideal for bonding standard silvered mirrors to walls and other general purpose metal bonding and sealing Permanently flexible: +/- 25% joint movement capability Interior/exterior application UV and weather resistant Neutral cure - will not corrode metal or concrete

20 pcs Download supporting documentation from the Titus Tekform website titustekform.com.au

7.15C

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.15D

Adhesives

Adhesives Primer and Cleaner

Primer 838

Size

Item number

4.5kg

601.8A60.838.004

•

Primer is an adhesive agent between the adhesive and substrate. It improves the bond on surfaces which are typically difficult to bond to The primer application takes place in a thin yet even coat on the entire surface Fields of application: For all difficult surfaces e.g. plastic profiles for wrapping or also metals like aluminium, etc

1 Drum Cleaning Agent 761.7

20kg •

•

601.8A60.761.720

Hotmelt material to clean melting units, hoses and application units using reactive PUR hot melt adhesives Prevents clogging of feeding systems as well as reactive incrustation on application units Renders nozzles clog free

1 Bag Cleaning Agent EVA to PUR 761.0

200g •

•

601.8A60.707.720

Hotmelt materail to clean up hose lines and applicators using reactive polyurethane hot melt adhesives Prevents clogging of feeding systems as well as reactive incrustation on application units Renders nozzles clog free

6 Canisters Download supporting documentation from the Titus Tekform website titustekform.com.au

7.16

Adhesives Cleaners

ABS Edge Cleaner Plus

Size

Item number

200L

601.8A60.006.200

20L

601.8A60.006.020

•

Formulated to clean off hotmelt and solvent based adhesives from ABS edging without attacking the ABS edging

1 Drum Contact Cleaner 101

20L •

•

Formulated for the clean up of metal tools and spray guns used in the application of contact adhesives Can be used for cleaning contact adhesive spills and over-spray on laminates Not suitable for ABS edging or polystyrene surfaces

1 Drum Download supporting documentation from the Titus Tekform website titustekform.com.au

7.17

601.8A60.101.020

Adhesives

Adhesives Adhesive Tape

Masking Tape

Length (m)

Width (mm)

Item number

601.8A81.018.050

601.8A81.024.050

601.8A81.036.050

601.8A81.048.050

601.8A80.048.050

1 Roll Packing Tape

1 Roll Download supporting documentation from the Titus Tekform website titustekform.com.au

7.18

Adhesives Adhesive Accessories

Size

Item number

100m

601.8A80.002.100

Bottle and Cap Set 500ml

601.8A80.054.000

Glue Bottle Only 500ml

601.8A80.052.000

Mask & Peel Protective Film

1 Pce Plastic Glue Bottles and Cap

Glue Bottle Cap Only

601.8A80.056.000

1 Set Tap for Plastic Drum

601.8A80.060.000

1 Pce Plastic Caulking Gun - Green

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

7.19

601.8A80.070.000

x.1

Cabinet Handles

x.2

Cabinet Handles Product guide

Stefano Orlati Handles Page

8.1

Information

8.2

Bow Handles

8.3

Profile Handles

8.12

Provincial Handles

8.16

Recessed Handles

8.19

Square Handles

8.20

Stainless Steel Handles

8.36

Knobs

8.38

Handles - Information

Stefano Orlati Handles Information

Colour Finish Guide

Please note: Colour finish guide is an indicative only - actual finish may vary

Antique Bronze

MBN

Matt Brushed Nickel

ABS

Aluminium Brushed Satin

Matt Chrome

Antique Copper

Pewter

BLKN

Black Nickel

Silver

Brushed Nickel

Satin Nickel

BSAT

Brushed Satin Antique Tin

Stainless Steel

BSBN

Brushed Satin Black Nickel

Tungsten

Chrome

Titanium Grey

Clear Glass

White

Foggy Silver

WHC

White Crackled Finish

Matt Black

Order Guide

All handles & knobs are supplied with a set of screws to suit. When ordering handles or knobs please use the following code stringExample

Handle Code

Centre Size

Finish

1037

128mm

Guide To Handle Dimensions

Length: Overall length of the handle(mm)

Length

Centre: Screw hole to screw hole(mm) Height: Height/Projection of handle(mm) Width: Width of handle face(mm)

Width

Height

Centre

8.2

1037

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

128 158

SO-1037-128 >

128 158

SO-1037-128 >

128 158

SO-1037-128 >

128 170

SO-112-128 >

128 170

SO-112-128 >

160 185

SO-114-160 >

160 185

SO-114-160 >

25 Pcs

112

10 Pcs

114

10 Pcs

8.3

122

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

Item number

160 180

SO-122-160 >

160 180

SO-122-160 >

128 162

SO-2050-128 >

128 160

SO-2051-128 >

128 160

SO-2051-128 >

128 158

SO-2053-128 >

128 158

SO-2053-128 >

10 Pcs

2050

10 Pcs

2051

10 Pcs

2053

20 Pcs

8.4

2060

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

115

SO-2060-96 >

128 154

SO-2060-128 >

115

SO-2060-96 >

128 154

SO-2060-128 >

224 270

SO-211XL-224 >

121

SO-2188-96 >

121

SO-2188-96 >

50 Pcs (SO-2060-96) 25 Pcs (SO-2060-128)

211XL

15 Pcs

2188

25 Pcs

8.5

3047

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

Item number

128 200

SO-3047-128 >

160 240

SO-3047-160 >

128 200

SO-3047-128 >

160 240

SO-3047-160 >

160 222

SO-3062-160 >

160 222

SO-3062-160 >

128 165

SO-311-128 >

128 165

SO-311-128 >

50 Pcs (S0-3047-128) 25 Pcs (SO-3047-160)

3062

25 Pcs

311

50 Pcs

8.6

3130

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

128 147

SO-3130-128 >

192 222

SO-3130-192 >

256 275

SO-3130-256 >

416 430

SO-3130-416 >

128 147

SO-3130-128 >

192 222

SO-3130-192 >

256 275

SO-3130-256 >

416 430

SO-3130-416 >

128 147

SO-3130-128 >

192 222

SO-3130-192 >

256 275

SO-3130-256 >

416 430

SO-3130-416 >

128 147

SO-3130-128 >

192 222

SO-3130-192 >

256 275

SO-3130-256 >

416 430

SO-3130-416 >

128 168

SO-325-128 >

160 200

SO-325-160 >

224 264

SO-325-224>

320 360

SO-325-320>

128 168

SO-325-128 >

160 200

SO-325-160 >

25 Pcs (SO-325-128, SO-325-160)

224 264

SO-325-224>

125 Pcs (SO-325-224, SO-325-320)

320 360

SO-325-320>

50 Pcs

325

8.7

3319

40 Pcs (SO-3319-192)

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

Item number

140

SO-3319-96>

192 250

SO-3319-192>

140

SO-3319-96>

192 250

SO-3319-192>

128 151

SO-3380-128>

160 189

SO-3380-160>

224 260

SO-3380-224>

320 358

SO-3380-320>

416 463

SO-3380-416>

128 151

SO-3380-128>

160 189

SO-3380-160>

224 260

SO-3380-224>

320 358

SO-3380-320>

416 463

SO-3380-416>

128 167

SO-6329-128 >

MBN

192 231

SO-6329-192 >

MBN

256 295

SO-6329-256>

MBN

320 359

SO-6329-320>

MBN

50 Pcs (SO-3319-96)

3380

50 Pcs (SO-3380-128, 125 Pcs)

6329

25 Pcs (SO-6239-256, 20 Pcs)

8.8

688

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

124

SO-688-96>

CH/SN

128 138

SO-7025-128>

160 170

SO-7025-160>

224 234

SO-7025-224>

320 330

SO-7025-320>

128 138

SO-7025-128>

160 170

SO-7025-160>

224 234

SO-7025-224>

320 330

SO-7025-320>

SO-9238-96 >

25 Pcs

7025

10 Pcs

9238

25 Pcs

8.9

118

9718

40 Pcs (SO-9718-96)

Finish

Width (mm)

Height (mm)

141

SO-9718-96 >

128 200

SO-9718-128 >

141

SO-9718-96 >

128 200

SO-9718-128 >

105

SO-9908-96 >

128 147

SO-9908-128 >

105

SO-9908-96 >

128 147

SO-9908-128 >

105

SO-9908-96 >

128 147

SO-9908-128 >

114

SO-9910-96 >

128 150

SO-9910-128 >

114

SO-9910-96 >

128 150

SO-9910-128 >

128 153

SO-ARC-128 >

160 190

SO-ARC-160 >

224 263

SO-ARC-224 >

288 336

SO-ARC-288 >

20 Pcs (SO-9908-128)

9910

25 Pcs (SO-9910-96)

Item number

20 Pcs (SO-9718-128)

9908

40 Pcs (SO-9908-96)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

20 Pcs (SO-9910-128)

ARC

10 Pcs (SO-ARC-288) 25 Pcs (SO-ARC-128, SO-ARC-224)

40 Pcs (SO-ARC-160)

8.10

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

128 148

SO-C-128 >

160 180

SO-C-160 >

192 212

SO-C-192 >

128 148

SO-C-128 >

160 180

SO-C-160 >

192 212

SO-C-192 >

128 148

SO-C-128 >

160 180

SO-C-160 >

192 212

SO-C-192 >

111

SO-TSB-96 >

BLKN

128 150

SO-TSB-128 >

BLKN

111

SO-TSB-96 >

128 150

SO-TSB-128 >

111

SO-TSB-96 >

128 150

SO-TSB-128 >

111

SO-TSB-96 >

111

SO-TSB-96 >

128 150

SO-TSB-128 >

111

SO-TSB-96 >

128 150

SO-TSB-128 >

125 Pcs

TSB

25 Pcs (SO-TSB-96) 50 Pcs (SO-TSB-128)

8.11

410

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

608.8J20.064.007

608.8J20.064.003

608.8J20.064.012

BLN

112

608.8J20.096.007

112

608.8J20.096.003

112

608.8J20.096.008

112

608.8J20.096.013

112

608.8J20.096.012

BLN

112

608.8J20.096.004

128 144

608.8J20.128.007

128 144

608.8J20.128.003

128 144

608.8J20.128.008

128 144

608.8J20.128.012

BLN

128 144

608.8J20.128.013

224 288

608.8J20.224.007

224 288

608.8J20.224.005

224 288

608.8J20.224.008

224 288

608.8J20.224.003

BLN

50 / 500 Pcs (064) 50 / 500 Pcs (096) 25 /250 Pcs (128) 25 /250 Pcs (224)

Made of aluminium

8.11A

7235

25 Pcs

8.11B

Finish

Width (mm)

Height (mm)

608.8O19.128.003

160 204

608.8O19.160.003

320 372

608.8O19.320.003

128 248

608.8O20.128.003

160 272

608.8O20.160.003

320 410

608.8O20.320.003

128 174

608.8O21.128.003

160 210

608.8O21.160.003

320 376

608.8O21.320.003

608.8F18.035.008

128 138

608.8F18.128.008

160 170

608.8F18.160.008

Made of zinc

779

25 Pcs

128 163

Made of zinc

7238

25 Pcs

Item number

Made of zinc

7236

25 Pcs

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

Made of zinc

3409

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

608.8C18.032.003

128 160

608.8C18.128.003

288 300

608.8C18.288.003

608.8C17.020.003

100

608.8C17.080.003

160 180

608.8C17.160.003

260 280

608.8C17.260.003

50 Pcs (032.003) 25 Pcs (128.003 - 288.003)

Made of aluminium

7130

50 Pcs (030.003) 25 Pcs (080.003 - 160.003, 260.003)

Made of steel

8.11C

748

25 Pcs

8.11D

Finish

Width (mm)

Height (mm)

Item number

134

608.8D12.096.007

134

608.8D12.096.003

128 166

608.8O12.128.007

128 166

608.8O12.128.003

110

608.8C16.096.003

128 142

608.8C16.128.003

160 174

608.8C16.160.003

256 270

608.8C16.256.003

320 334

608.8C16.320.003

Made of zinc

7106

25 Pcs

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

Made of zinc

AK0891

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Profile Handles

Stefano Orlati Handles Profile Handles

3000 35

SO-AK0891 >

3000 35

SO-AK0891B >

Side Profile

3 Metres

AK0891B

3 Metres

Side Profile

8.12

AK0894

Item number

3000 30

SO-AK0894 >

3600 71.8

SO-CAPRI-C >

3600 71.8

SO-CAPRI-C >

Side Profile

3 Metres

CAPRI-C

End Cap CAPRI-C-EC

BRACKET CAPRI-B

71.8mm

1.1mm

Side Profile

3.6 Metres (Please order your Capri end caps and brackets separately. )

8.13

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Profile Handles

26mm

CAPRI-J

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Profile Handles

Stefano Orlati Handles Profile Handles

3600 57

SO-CAPRI-J >

3600 57

SO-CAPRI-J >

End Cap CAPRI-J-EC

BRACKET CAPRI-B

57mm

1mm

Side Profile

3.6 Metres (Please order your Capri end caps and brackets separately. )

26mm

PESARO PULL

200

SO-PP-200 >

ABS

2 screw holes - 40 mm from edge 400

SO-PP-400 >

ABS

3 screw holes - 100 mm between each hole & edge 600

SO-PP-600 >

ABS

4 screw holes - 120 mm between each hole & edge 1250 18

SO-PP-1250 >

ABS

Without holes drilled 10mm

36mm

18mm

â&#x20AC;¢

Mounts on top of panel edge

2mm 1.5mm

Side Profile

50 Pcs (except SO-PP-200, 100 Pcs)

8.14

R156

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Profile Handles

SO-R156-64 >

ABS

160 190

SO-R156-160 >

ABS

SO-R156-64 >

160 190

SO-R156-160 >

â&#x20AC;¢

Mounts on top of panel edge

41mm 4mm 8mm

17mm

2mm

Side Profile

50 Pcs

7021

25 Pcs 50 Pcs (016.003)

8.15

Made of zinc

608.8A18.016.003

109

608.8A18.096.003

128 141

608.8A18.128.003

160 173

608.8A18.160.003

256 269

608.8A18.256.003

320 333

608.8A18.320.003

548

11mm m

29m

16m

Side Profile

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Profile Handles

Stefano Orlati Handles Profile Handles

128 170

SO-548-128 >

ABS

192 235

SO-548-192>

ABS

320 362

SO-548-320 >

ABS

544 588

SO-548-544 >

ABS

608 650

SO-548-608 >

ABS

736 775

SO-548-736 >

ABS

128 170

SO-548-128 >

192 235

SO-548-192>

320 362

SO-548-320 >

544 588

SO-548-544 >

608 650

SO-548-608 >

736 775

SO-548-736 >

25 Pcs (SO-548-608, SO-548-736) 50 Pcs (SO-548-128, SO-548-192, SO-548-544) 100 Pcs (SO-548-320)

8.15A

274

17mm

11mm

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Profile Handles

120

SO-274-96 >

120

SO-274-96 >

128 150

SO-274-128 >

192 245

SO-274-192 >

288 330

SO-274-288 >

576 628

SO-274-576 >

864 914

SO-274-864 >

120

SO-276-96 >

SO-276-64 >

120

SO-276-96 >

128 150

SO-276-128 >

192 245

SO-276-192 >

288 330

SO-276-288 >

13mm

Side Profile

50 Pcs (except SO-274-288-FS, 100 Pcs)

276

Side Profile

50 Pcs

8.15B

1186

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Provincial Handles

Stefano Orlati Handles Provincial Handles

132

SO-1186-96 >

BSAT

160 204

SO-1186-160 >

BSAT

132

SO-1186-96 >

BSBN

160 204

SO-1186-160 >

BSBN

Complementary knob 1186K page > 8.39 50 Pcs

1208

135

SO-1208-96 >

BSAT

135

SO-1208-96 >

BSBN

Complementary knob 1186K page > 8.39

50 Pcs

3440

128 150

SO-3440-128 >

160 182

SO-3440-160 >

224 246

SO-3440-224 >

320 342

SO-3440-320 >

128 150

SO-3440-128 >

BSBN

160 182

SO-3440-160 >

BSBN

224 246

SO-3440-224 >

BSBN

320 342

SO-3440-320 >

BSBN

Complementary knob 3440 page > 8.41

25 Pcs ( SO-3440-320, 50 Pcs)

8.16

8391

160 180

Item number

SO-8391-160 >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Provincial Handles

Complementary knob 3801 page > 8.41 Complementary knob 8393 page > 8.42

30 Pcs

8392

128 188

SO-8392-128 >

Complementary knob 3801 page > 8.41 Complementary knob 8393 page > 8.42

50 Pcs

8407

SO-8407-64 >

Complementary knob 8741 page > 8.43 50 Pcs

8658

132

SO-8658-96 >

132

SO-8658-96 >

132

SO-8658-96 >

Complementary knob 8741 page > 8.42

50 Pcs

8.17

C15

128 150

Item number

SO-C15-128 >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Provincial Handles

Stefano Orlati Handles Provincial Handles

WHC/P

Complementary knobs C10 and C14 page > 8.44

20 Pcs

8.18

1159

Item number

SO-1159 >

128 138

SO-709-128 >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Recessed Handles

50 Pcs

709

• •

Suit minimum 16mm board Recess depth 10mm

25 Pcs

AHS403

128 145

SO-AHS403-128 >

ABS

160 172

SO-AHS403-160 >

ABS

128 145 16

SO-AHS403-128 >

160 172

SO-AHS403-160 >

• • •

25 Pcs (SO-AHS403-160)

MH20

40 Pcs (SO-AHS403-128)

SO-MH20-127 >

226 330

SO-MH20-226 >

•

8.19

Suit minimum 16mm board Recess depth 14mm ABS in this range is a dark version of the aluminiu brushed satin finish.

127 170

•

7 Pcs

Suit minimum 18mm board Recess depth 15mm

7057

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Recessed Handles

Stefano Orlati Handles Recessed Handles

128 138

608.8C18.128.910

128 138

608.8C18.128.010*

128 138

608.8C18.128.011*

* Available upon special request

25 Pcs

Made of zinc

8.19A

8.19B

1092

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

102

SO-1092-96 >

128 134

SO-1092-128 >

160 166

SO-1092-160 >

224 230

SO-1092-224 >

288 294

SO-1092-288 >

320 326

SO-1092-320 >

102

SO-1092-96 >

128 134

SO-1092-128 >

160 166

SO-1092-160 >

224 230

SO-1092-224 >

288 294

SO-1092-288 >

320 326

SO-1092-320 >

102

SO-1092-96 >

128 134

SO-1092-128 >

160 166

SO-1092-160 >

224 230

SO-1092-224 >

288 294

SO-1092-288 >

320 326

SO-1092-320 >

10 Pcs (SO-1092-224, SO-1092-288, SO-1092-320) 20 Pcs (SO-1092-128, SO-1092-160) 25 Pcs (SO-1092-96)

8.20

113

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

160 179

SO-113-160 >

160 179

SO-113-160 >

128 159

SO-116-128 >

160 190

SO-116-160 >

128 159

SO-116-128 >

160 190

SO-116-160 >

128 137

SO-1745-128 >

192 201

SO-1745-192 >

256 265

SO-1745-256 >

128 137

SO-1745-128 >

192 201

SO-1745-192 >

256 265

SO-1745-256 >

10 Pcs

116

10 Pcs

1745

25 Pcs

8.21

1759

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

115

SO-1759-96 >

128 148

SO-1759-128 >

192 210

SO-1759-192 >

224 245

SO-1759-224 >

320 339

SO-1759-320 >

480 499

SO-1759-480 >

544 563

SO-1759-544 >

736 755

SO-1759-736 >

115

SO-1759-96 >

128 148

SO-1759-128 >

192 210

SO-1759-192 >

224 245

SO-1759-224 >

320 339

SO-1759-320 >

480 499

SO-1759-480 >

544 563

SO-1759-544 >

736 755

SO-1759-736 >

115

SO-1759-96 >

128 148

SO-1759-128 >

192 210

SO-1759-192 >

224 245

SO-1759-224 >

320 339

SO-1759-320 >

480 499

SO-1759-480 >

50 Pcs (SO-1759-128, SO-1759-480, SO-1759-544, SO-1759-736, SO-1759-96)

544 563

SO-1759-544 >

25 Pcs (SO-1759-192, SO-1759-224)

736 755

SO-1759-736 >

100 Pcs (SO-1759-320)

8.22

216

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

256 295

SO-216-256 >

320 370

SO-216-320 >

128 145

11.5 SO-255-128 >

192 210

11.5 SO-255-192 >

544 560

11.5 SO-255-544 >

608 625

11.5 SO-255-608 >

100 Pcs

255

50 Pcs (SO-255-128, SO-255-192) 100 Pcs (SO-255-544, SO-255-608)

8.23

7011

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

102

608.8R16.096.007

128 134

608.8R16.128.007

160 166

608.8R16.160.007

256 262

608.8R16.256.007

608.8R16.032.003

102

608.8R16.096.003

128 134

608.8R16.128.003

160 166

608.8R16.160.003

256 262

608.8R16.256.003

320 326

608.8R16.320.003

448 454

608.8R16.448.003

111

608.8E18.096.003

128 144

608.8E18.128.003

160 176

608.8E18.160.003

256 272

608.8E18.256.003

320 337

608.8E18.320.003

25 Pcs (128.006, 160.003, 256.003, 320.003, 448.003) 50 Pcs (032.003, 096.007, 096.003)

Made of aluminium

7202

25 Pcs

Made of zinc

8.24

40 Pcs (Centre lengths 16 and 160mm) 50 Pcs (Centre lengths 128, 448, 544, 650 and 96mm) 100 Pcs (Centre lengths 224 and 288mm)

8.25

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

109

SO-288-96 >

128 141

SO-288-128 >

160 173

SO-288-160 >

224 237

SO-288-224 >

288 301

SO-288-288 >

448 461

SO-288-448 >

544 557

SO-288-544 >

650 663

SO-288-650 >

109

SO-288-96 >

128 141

SO-288-128 >

160 173

SO-288-160 >

224 237

SO-288-224 >

288 301

SO-288-288 >

448 461

SO-288-448 >

544 557

SO-288-544 >

650 663

SO-288-650 >

Product information continues, next page

40 Pcs (Centre lengths 16 and 160mm)

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

109

SO-288-96 >

128 141

SO-288-128 >

160 173

SO-288-160 >

224 237

SO-288-224 >

288 301

SO-288-288 >

448 461

SO-288-448 >

544 557

SO-288-544 >

650 663

SO-288-650 >

736 749

SO-288-736 >

Complementary knob 288 page > 8.39

50 Pcs (Centre lengths 128, 448, 544, 650, 736 and 96mm) 100 Pcs (Centre lengths 224 and 288mm)

298

SO-298-64 >

128 142

SO-298-128 >

256 270

SO-298-256 >

SO-298-64 >

128 142

SO-298-128 >

256 270

SO-298-256 >

SO-298-64 >

128 142

SO-298-128 >

256 270

SO-298-256 >

25 Pcs (SO-298-128) 40 Pcs (SO-298-64) 100 Pcs (SO-298-256)

8.26

305

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

128 145

SO-305-128 >

160 177

SO-305-160 >

224 241

SO-305-224 >

320 337

SO-305-320>

128 145

SO-305-128 >

160 177

SO-305-160 >

224 241

SO-305-224 >

320 337

SO-305-320>

128 158

SO-3061-128 >

192 226

SO-3061-192 >

128 158

SO-3061-128 >

192 226

SO-3061-192 >

25 Pcs (SO-305-128, SO-305-160) 50 Pcs (SO-305-224) 125 Pcs (SO-305-320)

3061

8 Pcs (SO-3061-128) 10 Pcs (SO-3061-192)

8.27

3064

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

121

SO-3064-96 >

128 157

SO-3064-128 >

160 192

SO-3064-160 >

192 224

SO-3064-192 >

240 273

SO-3064-240 >

320 355

SO-3064-320 >

121

SO-3064-96 >

128 157

SO-3064-128 >

160 192

SO-3064-160 >

192 224

SO-3064-192 >

240 273

SO-3064-240 >

320 355

SO-3064-320 >

SO-508-96 >

15 Pcs (SO-3064-160, SO-3064-240 and SO-3064-320) 20 Pcs (SO-3064-128, SO-3064-192) 25 Pcs (SO-3064-96)

508

127

20 Pcs

8.28

6002

Item number

114

SO-6002-96 >

160 178

SO-6002-160 >

114

SO-6002-96 >

160 178

SO-6002-160 >

Complementary handles 6002 page > 8.42

25 Pcs (except, SO-6002-160, 10 Pcs)

8.29

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

6330

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

128 142

SO-6330-128 >

192 206

SO-6330-192 >

256 269

SO-6330-256 >

320 334

SO-6330-320 >

544 558

SO-6330-544 >

128 142

SO-6330-128 >

192 206

SO-6330-192 >

25 Pcs (SO-6330-320, SO-6330-544)

256 269

SO-6330-256 >

30 Pcs (SO-6330-256)

320 334

SO-6330-320 >

50 Pcs (SO-6330-128, SO-6330-192)

544 558

SO-6330-544 >

SO-690-64 >

108

SO-809-96 >

160 178

SO-809-160 >

256 274

SO-809-256 >

108

SO-809-96 >

160 178

SO-809-160 >

256 274

SO-809-256 >

108

SO-809-96 >

160 178

SO-809-160 >

256 274

SO-809-256 >

690

50 Pcs

809

25 Pcs (SO-809-160) 50 Pcs (SO-809-96, SO-809-256)

Side Profile

Complementary knob 809 page > 8.42

8.30

8230

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

128 192

SO-8230-128 >

ABS

192 256

SO-8230-192 >

ABS

320 384

SO-8230-320 >

ABS

480 544

SO-8230-480 >

ABS

128 174

SO-843-128 >

192 238

SO-843-192 >

128 174

SO-843-128 >

192 238

SO-843-192 >

160 250

SO-8645-160 >

ABS

160 250

SO-8645-160 >

160 250

SO-8645-160 >

160 250

SO-8650-160 >

ABS

160 250

SO-8650-160 >

160 250

SO-8650-160 >

25 Pcs (SO-8230-128, SO-8230-192) 100 Pcs (SO-8230-480)

843

125 Pcs (SO-8230-320)

25 Pcs

8645

50 Pcs

8650

50 Pcs

8.31

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

128 135

SO-A-128 >

160 167

SO-A-160 >

224 231

SO-A-224 >

320 327

SO-A-320>

128 135

SO-A-128 >

160 167

SO-A-160 >

224 231

SO-A-224 >

320 327

SO-A-320>

128 135

SO-A-128 >

160 167

SO-A-160 >

50 Pcs (SO-A-224 and SO-A-320)

224 231

SO-A-224 >

100 Pcs (SO-A-160)

320 327

SO-A-320>

128 135

SO-B-128>

160 167

SO-B-160 >

224 231

SO-B-224 >

320 327

SO-B-320>

128 135

SO-B-128>

160 167

SO-B-160 >

224 231

SO-B-224 >

320 327

SO-B-320>

128 135

SO-B-128>

25 Pcs (SO-A-160)

160 167

SO-B-160 >

50 Pcs (S0-A-224 and SO-A-320)

224 231

SO-B-224 >

125 Pcs (SO-A-128)

320 327

SO-B-320>

125 Pcs (SO-A-128)

8.32

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

106

SO-D-96 >

106

SO-D-96 >

128

138

SO-D-128 >

128

143

SO-GL01-128 >

CL/CH

192

207

SO-GL01-192 >

CL/CH

256

271

SO-GL01-256 >

CL/CH

320

335

SO-GL01-320 >

CL/CH

25 Pcs

GL01

10 Pcs (SO-GL01-256) 12 Pcs (SO-GL01-128) 15 Pcs (SO-GL01-192 and 320)

8.33

IN2

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

108

SO-IN2-90 >

SO-MH14-64 >

110

SO-MH14-96 >

128 141

SO-MH14-128 >

224 238

SO-MH14-224 >

320 333

SO-MH14-320 >

SO-MH14-64 >

110

SO-MH14-96 >

128 141

SO-MH14-128 >

224 238

SO-MH14-224 >

320 333

SO-MH14-320 >

SO-MH14-64 >

110

SO-MH14-96 >

128 141

SO-MH14-128 >

224 238

SO-MH14-224 >

320 333

SO-MH14-320 >

25 Pcs

MH14

20 pcs (SO-MH14-224, SO-MH14-320) 25 pcs (SO-MH14-64, SO-MH14-96, SO-MH14-128)

8.34

OK90

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

128 149

SO-OK90-128 >

128 150

SO-T905-128 >

192 214

SO-T905-192 >

128 150

SO-T905-128 >

192 214

SO-T905-192 >

25 Pcs

T905

Complementary Knob T905K page > 8.45

15 Pcs

50 Pcs

8.35

154

SO-TB-96 >

7127

25 Pcs

Finish

Width (mm)

Height (mm)

Item number

128 148

608.8F16.128.003

160 180

608.8F16.160.003

256 276

608.8F16.256.003

320 340

608.8F16.320.003

121

608.8J18.096.003

128 161

608.8J18.128.003

160 193

608.8J18.160.003

192 225

608.8J18.192.003

240 273

608.8J18.240.003

121

608.8J18.096.010

128 161

608.8J18.128.010

160 193

608.8J18.160.010

192 225

608.8J18.192.010

240 273

608.8J18.240.010

Made of zinc

3163

25 Pcs

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

Made of zinc

8.35A

800

25 Pcs (076.008, 50 Pcs)

8.35B

Finish

Width (mm)

Height (mm)

Item number

608.8M24.076.008

106

9.5

608.8M24.096.007

106

9.5

608.8M24.096.008

128 138

9.5

608.8M24.128.007

128 138

9.5

608.8M24.128.008

160 170

9.5

608.8M24.160.008

192 202

9.5

608.8M24.192.007

192 202

9.5

608.8M24.192.008

256 266

9.5

608.8M24.256.007

256 266

9.5

608.8M24.256.008

128 158

608.8O18.128.003

160 192

608.8O18.160.003

192 226

608.8O18.192.003

160 192

608.8O18.160.010

Made of steel

3447

25 Pcs

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

Made of zinc

5012

25 Pcs

Finish

Width (mm)

Height (mm)

Item number

156

608.8D10.096.003

128 188

608.8D10.128.003

160 220

608.8D10.160.003

256 316

608.8D10.256.003

320 380

608.8D10.320.003

384 444

608.8D10.384.003

448 508

608.8D10.448.003

544 604

608.8D10.544.003

608 668

608.8D10.608.003

128 158

608.8D12.128.003

160 190

608.8D12.160.003

256 286

608.8D12.256.003

320 350

608.8D12.320.003

416 446

608.8D12.416.003

544 574

608.8D12.544.003

608 638

608.8D12.608.003

Made of aluminium

7012

25 Pcs

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

Made of stainless steel

8.35C

7105

25 Pcs

8.35D

Finish

Width (mm)

Height (mm)

Item number

102

608.8R18.096.003

128 134

608.8R18.128.003

160 166

608.8R18.160.003

256 262

608.8R18.256.003

320 326

608.8R18.320.003

128 140

608.8A16.128.003

160 172

608.8A16.160.003

256 268

608.8A16.256.003

Made of zinc

7120

25 Pcs

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

Made of zinc

6820

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stainless Steel Handles

Stefano Orlati Handles Stainless Steel Handles

128 136

SO-6820-128 >

160 168

SO-6820-160 >

224 232

SO-6820-224 >

320 328

SO-6820-320 >

448 456

SO-6820-448 >

128 150

SO-8513-128 >

160 182

SO-8513-160 >

192 214

SO-8513-192 >

224 246

SO-8513-224 >

352 374

SO-8513-352 >

554 576

SO-8513-554 >

576 598

SO-8513-576 >

832 854

SO-8513-832 >

128 138

SO-8721-128 >

160 170

SO-8721-160 >

192 202

SO-8721-192 >

224 234

SO-8721-224 >

320 330

SO-8721-320 >

448 458

SO-8721-448 >

554 564

SO-8721-554 >

20 Pcs (SO-6820-128, SO-6820-160, SO-6820-224) 25 Pcs (SO-6820-320, SO-6820-448)

8513

25 Pcs (SO-8513-832)

40 Pcs (SO-8513-160, SO-8513-192)

50 Pcs (SO-8513-128, SO-8513-224, SO-8513-352, SO-8513-554) 100 Pcs (SO-8513-576)

8721

20 Pcs

8.36

909

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Stainless Steel Handles

128 142

SO-909-128 >

160 174

SO-909-160 >

224 238

SO-909-224 >

320 334

SO-909-320 >

480 494

SO-909-480 >

128 138

SO-SSD-128 >

160 170

SO-SSD-160 >

192 202

SO-SSD-192 >

288 298

SO-SSD-288 >

352 362

SO-SSD-352 >

448 458

SO-SSD-448 >

136

SO-SSTB-96 >

128 168

SO-SSTB-128 >

160 200

SO-SSTB-160 >

192 232

SO-SSTB-192 >

288 328

SO-SSTB-288 >

352 392

SO-SSTB-352 >

448 488

SO-SSTB-448 >

544 584

SO-SSTB-544 >

736 776

SO-SSTB-736 >

960 1000 34

SO-SSTB-960 >

25 Pcs (except SO-909-480, 20 Pcs)

SSD

25 Pcs (except SO-SSD-352, 10 Pcs and SO-SSD-128, 50 Pcs)

SSTB

25 Pcs

8.37

1112

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Knobs

Stefano Orlati Handles Knobs

SO-1112-16 >

SO-1160S-K >

SO-1160L-K >

SO-1160S-K >

SO-1160L-K >

SO-1172-K >

100 Pcs

1160

50 Pcs

1172

50 Pcs

1173

SO-1173-16>

50 Pcs

8.38

1179

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

SO-1179-K >

50 Pcs

1186

SO-1186-K >

BSAT

SO-1186-K >

BSBN

Complementary handles 1208 page > 8.16 Complementary handles 1186 page > 8.16 100 Pcs

139

SO-139-K >

50 Pcs

288

SO-288-16 >

Complementary handle 288 page > 8.29

40 Pcs

8.39

3318

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Knobs

Stefano Orlati Handles Knobs

Item number

SO-3318-16 >

SO-3320-K >

SO-3321-K >

100 Pcs

3320

50 Pcs

3321

50 Pcs

8.40

3440

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

SO-3440-K >

BSBN

Complementary handles 3440 page > 8.16

50 Pcs

3590

SO-3590-K >

250 Pcs

3801

SO-3801-K >

Complementary handles 8391 page > 8.17 Complementary handles 8392 page > 8.17

50 Pcs

8.41

6002

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Knobs

Stefano Orlati Handles Knobs

SO-6002-32 >

Complementary handles 6002 page > 8.29

25 Pcs

8047

SO-8047-K >

SO-809-16 >

15 Pcs

809

Complementary handle 809 page > 8.30 40 Pcs

8393

Side Profile

SO-8393-K >

Complementary handles 8391 page --> 8.17 Complementary handles 8392 page --> 8.17

50 Pcs

8.42

843

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

SO-843-K >

SO-843-16 >

SO-843-K >

SO-843-16 >

Complementary handle 843 page > 8.31 50 Pcs

8741

SO-8741-K >

Complementary handles 8658 page > 8.17 Complementary handles 8407 page > 8.17 50 Pcs

929-1

SO-929-1-K >

SO-9909-K >

50 Pcs

9909

40 Pcs

8.43

C10

Item number

SO-C10-K >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Knobs

Stefano Orlati Handles Knobs

WHC/P

Complementary handles C15 page > 8.18

25 Pcs

C14

SO-C14-K >

WHC/P

Complementary handles C15 page > 8.18

25 Pcs

GL02

SO-GL02-K >

CL/CH

SO-GL03-K >

CL/CH

20 Pcs

GL03

20 Pcs

8.44

MJ002

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

SO-MJ002-K >

SO-MJ003-K >

SO-T905K-16 >

100 Pcs

MJ003

100 Pcs

T905

Complementary handle T905 page > 8.35

50 Pcs

8.45

947

50 Pcs

Finish

Diametre (mm)

Height (mm)

608.8K22.025.008

608.8K21.012.008

608.8K21.020.008

608.8K21.025.008

608.8K20.030.007

608.8K20.030.008

608.8K20.030.003

Made of zinc

CV30

50 Pcs

Item number

Made of zinc

3515

50 Pcs

Length (mm)

Centre (mm)

Knobs

Stefano Orlati Handles Knobs

Made of zinc

8.46

9010

80 Pcs

8.47

Made of zinc

Item number

608.8Z00.000.403

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

Finish

Length (mm)

Knobs

Stefano Orlati Handles Knobs

Item number

Truss

611.8L35.245.012

Head Screw M4 x 12mm

611.8L35.245.016

Head Screw M4 x 16mm

611.8L35.245.020

Head Screw M4 x 20mm

611.8L35.245.022

Head Screw M4 x 22mm

611.8L35.245.025

Head Screw M4 x 25mm

611.8L35.245.032

Head Screw M4 x 32mm

611.8L35.245.035

Head Screw M4 x 35mm

611.8L35.245.038

Head Screw M4 x 38mm

611.8L35.245.042

Head Screw M4 x 42mm

611.8L35.245.045

Head Screw M4 x 45mm

611.8L35.245.050

Head Screw M4 x 50mm

Up to 25mm / 1000 Pcs Over 25mm / 500 Pcs

8.48

8.49

Innerware & Accessories

Innerware

Product guide

FGV Kitchen Innerware Page

Alto Pull-out Column

9.3

Duetto Corner Unit

9.5

Lato Base Cabinet Unit

9.6

Vario Pull-out

9.7

Lindo Undersink storage Unit

9.8

Vino Wine Rack

9.9

Tekform Kitchen Innerware Page

Pantry Units

9,10

Wire Drawers

9.15

Corner Units

9.16

Base Units

9.18

Bottle Storage

9.20

Glass Holders

9.21

Storage Baskets

9.22

Kitchen Accessories Page

Tea Towel Rails

9.1

9.23

Laundry Innerware Page

Tilting Laundry Basket Laundry Basket for Drawers

9.24 9.24

Drawer Inserts Page

Kombi Cutlery Trays

9.25

Drawer Inserts

9.31

Bridge Cutlery Trays

9.32

Utensil and Spice Trays

9.34

Utensil/Tray ends and Dividers

9.36

Waste Bins Page

Tidy Bins

9.39

Twin Pull-out Bins

9.41

Single Pull-out Bins

9.43

Tekform Twin Bins

9.44

Tekno Soft-close Bins

9.45

Benchtop Bin

9.47

9.2

Kitchen Innerware Alto Pull-out Column •

Alto Pull-out Frame with SlowMotion Damping

Alto Pull-out Slides

Weight Capacity (kg)

•

Heavy duty full-extension slides Integrated SlowMotion damping technology Easy adjustable platforms with anti-slip mats Weight capacity 100kg

Width (mm)

•

Min. Internal Carcase Depth (mm)

•

Item number

490

300

100

607.8D08.420.030

490

400

100

607.8D08.420.040

Kit includes: •

•

Alto Basket Kit

1 Kit

1610 - 2010mm adjustable heavy duty welded pull-out frame with epoxy coating (1 pce) Heavy duty full extention slides with SlowMotion damping and anti-whip technology (2 pcs)

•

CristalLine style baskets (4 pcs)

•

Front brackets (2 pcs)

Made of steel with chrome and glass

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.3

Alto Basket Divider

Width (mm)

Kitchen Innerware

Kitchen Innerware Alto Pull-out Column

Item number

300

607.8D08.423.030

400

607.8D08.423.040

Kit includes: â&#x20AC;˘

â&#x20AC;˘

1 Kit

CristalLine style transverse bars (3 pcs) Connectors (6 pcs)

Made of glass and plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.4

Kitchen Innerware Duetto Corner Cabinet Unit Synchronised movement with fully extractable ﬁrst carriage and accessible second carriage Heavy duty slides Integrated SlowMotion damping technology Easily adjustable platforms with anti-slip mats

•

• •

Weight Capacity (kg)

Left hand

660 x 860 x 490

30 per basket

607.8D08.451.045

Right hand

660 x 860 x 490

30 per basket

607.8D08.452.045

Opening Direction

Min Dimensions mm (H x W x D)

•

Duetto Blind Corner Unit with SlowMotion Damping

•

1 Set

Minimum door opening 400mm

Made of steel with chrome and glass

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.5

Item number

Kitchen Innerware Lato Base Cabinet Unit • • •

Min Dimensions mm (H x D)

Weight Capacity (kg)

Lato pull-out base unit with 2 shelves and SlowMotion damping

Width (mm)

Kitchen Innerware

•

Made for small cabinet spaces Allows full access to unused space Includes two height adjustable shelves Integrated SlowMotion damping technology

300

684 x 460

30 per basket

607.8D08.462.030

400

684 x 460

30 per basket

607.8D08.462.040

•

1 Set

Item number

Universal mounting (Left and Right-handed)

Made of steel with chrome and glass

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.6

Kitchen Innerware Vario Pull-out Unit

Vario Pull-out Unit for Narrow Cabinet with SlowMotion Damping

Cabinet height (mm)

•

Narrow cabinet storage Baskets to host bottles and tins Integrated SlowMotion damping technology

Min. internal carcase depth (mm)

•

Suits outside cabinet width (mm)

•

Item number

150

490

Min. 680

607.8D08.490.015

Kit includes: •

CristalLine style shelves (2 shelves)

•

Pull-out frame with roller device

•

1 Kit

Slides with built-in SlowMotion damping technology

Made of steel, chrome and glass

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.7

• •

Lindo Pull-out Undersink Storage Unit with SlowMotion Damping

Item number

300

485

Min. 545

607.8D08.485.030

Kit includes: •

•

Open style shelves with stainless steel bottoms (2 small, 1 big) Side mounted pull-out frame Slides with built-in SlowMotion damping technology

Technical details

1 Kit

Made of steel, stainless steel and plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.8

Kitchen Innerware

•

Undersink space management The plate is equipped with a grid of holes in order to position the baskets in various configurations. Includes two small and one large basket with stainless steel bottoms to avoid corrosion Integrated SlowMotion damping technology Universal mounting (left or right-handed)

Cabinet height (mm)

•

Min. internal carcase depth (mm)

•

Suits outside cabinet width (mm)

Kitchen Innerware Lindo Pull-out Undersink Storage Unit

Kitchen Innerware Vino Pull-out Wine Rack

•

Item number

Left hand

684 x 400 x 490

607.8D08.040.001

Right hand

684 x 400 x 490

607.8D08.040.002

Opening Direction

•

Ideal solution for storing wine in the kitchen Ball bearing slides are fixed to the cabinet and connected to the frame Wine rack can be pulled fully out of the cabinet Integrated SlowMotion damping technology

Weight Capacity (kg)

•

Min Dimensions mm (H x W x D)

•

Vino – Pull-out Wine Rack with SlowMotion Damping

1 Set

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.9

Kitchen Innerware Pantry Units • • •

Depth mm (D)

Height mm (H)

Pull-out Pantry Unit with Soft Close

Width mm (W)

Example of mesh basket base

Suits outside cabinet width (mm)

Kitchen Innerware

•

Integrated softclose function Innovative Mesh basket design Includes 5 inner baskets Weight capacity 100kg

Item number

300

250

500

1860-2200

607.8D55.222.030

400

345

500

1860-2200

607.8D55.222.040

450

395

500

1860-2200

607.8D55.222.045

500

445

500

1860-2200

607.8D55.222.050

Min. internal carcase depth 510mm 607.8D55.001.006

Basket Holder Extension

607.8D25.002.006

1860-2200

Additional Basket Holder Set

500 W

1 Set

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.10

Kitchen Innerware Pantry Units •

• •

Example of mesh basket base

Suits outside cabinet width (mm)

Width mm (W)

Depth mm (D)

Height mm (H)

•

Contents moves forward as the door opens for easy access Innovative Mesh basket design Includes 5 inner baskets and 5 door baskets Weight capacity 60kg

Item number

Deluxe Pantry Unit

450

384

455

1840-1970

607.8D56.197.045

600

534

455

1840-1970

607.8D56.197.060

•

Min. internal carcase depth 480mm

1840-1970

455

1 Set

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.11

Kitchen Innerware Pantry Units •

• •

Depth mm (D)

Height mm (H)

Swivel Pull-out Pantry Unit with Soft Close

Width mm (W)

Example of mesh basket base

Suits outside cabinet width (mm)

Kitchen Innerware

•

Pantry pulls out and swivels left and right for easy access to contents Includes 5 inner baskets with mesh base Integrated soft close function Weight capacity 80kg

Item number

300

250

520

1860-2200

607.8D56.222.030

400

345

520

1860-2200

607.8D56.222.040

450

395

520

1860-2200

607.8D56.222.045

Min. internal carcase depth 530mm

1860-2200

•

520

1 Set

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.12

Kitchen Innerware Larder Units

Example of mesh basket base Larder Unit 412

Height mm (H)

•

Depth mm (D)

•

Universal unit can be mounted left or right Innovative Mesh basket design Includes 7 Door baskets, 7 Internal baskets Weight capacity 60kg

Width mm (W)

•

Suits outside cabinet width (mm)

•

Item number

450

412

520

1840-1970

607.8D50.197.045

1840-1970

Min. internal carcase depth 530mm

520 412

1840-1970

520

1 Set

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.13

Kitchen Innerware Larder Units • • •

Depth mm (D)

Height mm (H)

Unique Larder Unit

Width mm (W)

Example of mesh basket base

Suits outside cabinet width (mm)

Kitchen Innerware

•

Utilise full cabinet storage capacity Easy access to all contents Innovative Mesh basket design Weight capacity 100kg

Item number

900

778

520

1260-1390

607.8D50.139.090

900

778

520

1840-1970

607.8D50.197.090

• •

•

Min. internal carcase depth 530mm Single height unit (139.090) has 16 inner baskets and 8 door baskets Full height unit (197.090) has 20 inner baskets and 10 door baskets

778

1840-1970

1260-1390

778

520

139.090

520

1 Set

197.090

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.14

Kitchen Innerware Wire Drawers

32.2

150/215

32.2

Height mm (H)

Wire Drawers with Soft Close

Depth mm (D)

•

Pull-out wire drawers for kitchen storage Integrated soft close function Weight capacity 40kg

Width mm (W)

•

Suits outside cabinet width (mm)

•

Item number

450

410-418

453

200

607.8D15.200.045

500

460-468

453

200

607.8D15.200.050

600

560-568

453

200

607.8D15.200.060

800

760-768

453

200

607.8D15.200.080

900

860-868

453

200

607.8D15.200.090

1000

960-968

453

200

607.8D15.200.100

300

260-268

453

135

607.8D15.135.030

400

360-368

453

135

607.8D15.135.040

450

410-418

453

135

607.8D15.135.045

500

460-468

453

135

607.8D15.135.050

600

560-568

453

135

607.8D15.135.060

800

760-768

453

135

607.8D15.135.080

900

860-868

453

135

607.8D15.135.090

1000

960-968

453

135

607.8D15.135.100

Wire drawer mounting bracket

2 Pcs (200.045-200.100, 135.100) 4 Pcs (135.030-135.090, 000.006)

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.15

607.8D15.000.006

Kitchen Innerware Corner Units • • • •

615 525 595 607.8D25.595.045

Item number >

Right-hand

450

Left-hand

440 830 180 607.8D25

Height mm (H)

450

Depth mm (D)

Width mm (W)

Swivel Corner Unit with Soft Close

Suits outside cabinet width (mm)

Kitchen Innerware

•

Utilise wasted corner space for storage Full Access unit includes Innovative Mesh basket design Suitable for hinge or panel doors Universal for right and left handed hinge doors Integrated soft close function

210.090 220.090

180

830

1 Set Full Access Corner Unit with Soft Close

1 Set Download supporting documentation from the Titus Tekform website titustekform.com.au

9.16

Diameter mm (W)

Height mm (H)

Easy Reach Corner Unit

Suits outside cabinet width (mm)

Kitchen Innerware Corner Units

Item number

900

∅780

630-760

607.8D25.760.090

• •

∅

•

Innovative Mesh basket design Round trip pull-out Suitable for both pie-cut and full round open doors Weight capacity 80kg

864-964 520

•

• • •

Made of steel with silver coating (frame) Made of steel with chrome (baskets)

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.17

Item number

550

607.8D26.520.045

Utilise wasted corner space for storage Innovative Mesh basket design Universal for both right and left handed doors Integrated soft close function

1 Set

Height mm (H)

450

Depth mm (D)

Width mm (W)

Magic Corner Unit with Soft Close

Suits outside cabinet width (mm)

Made of steel with chrome

1 Set

Suits outside cabinet width (mm)

Diameter mm (W)

Height mm (H)

270º Pie-cut Corner Unit

Kitchen Innerware

Kitchen Innerware Corner and Base Units

900

∅820

635-800 607.8D25.080.090

•

Item number

Utilise wasted corner space for storage

635-800

100

Min. 860

Min. 530

Min. 860

100 Ø820

Depth mm (D)

Height mm (H)

Pull-out Utility Unit with Soft Close

Width mm (W)

Made of steel with chrome

Suits outside cabinet width (mm)

1 Set

Item number

150

112

508

500

607.8D80.500.015

• •

1 Set

Utilise even the smallest space for storage Weight capacity 40kg

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.18

Kitchen Innerware Base Unit

Pull-out Utility Unit, Side Mount with Soft Close

Height mm (H)

•

Depth mm (D)

•

Suitable for hinge or panel door Universal left or right hand mounting Integrated soft close function Includes 2 baskets

Width mm (W)

•

Suits outside cabinet width (mm)

•

Item number

200

158

488

569

607.8D90.596.020

300

248

488

569

607.8D90.596.030

400

348

488

569

607.8D90.596.040

H W

1 Set

158/248/348

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.19

Kitchen Innerware Bottle Storage Units Perfect for storing bottles in the kitchen Universal left or right hand mounting Integrated soft close function

• •

Width mm (W)

Depth mm (D)

Height mm (H)

Pull-out Bottle Storage Unit with Soft Close

Suits outside cabinet width (mm)

Kitchen Innerware

•

Item number

400

230

488

570

607.8D61.570.040

• •

1 Set

Made of steel with chrome

Pull-out and Swivel Bottle Rack with Soft Close

400 •

1 Set

Holds 25 bottles Weight capacity 40kg

238

335

496

607.8D60.570.040

Holds 12 bottles

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.20

Depth mm (D)

Height mm (H)

Wall Mount Glass Holder Rack, Single Rail

Width mm (W)

Kitchen Innerware Glass Holder Racks

Item number

109

330

607.8D40.100.000

214

330

607.8D40.200.000

424

330

607.8D40.400.000

D W

Made of steel with chrome

24 Pcs Wall Mount Glass Holder Rack, Double Rail

Made of steel with chrome

24 Pcs

Wall Mount Glass Holder Rack, Quadruple Rail

24 Pcs

Made of steel with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.21

Depth (mm)

Height (mm)

Wire Storage Basket with slides

ICW (mm)

Kitchen Innerware

Kitchen Innerware Wire Storage Baskets

Item number

466

400

200

607.8F02.168.002

566

400

200

607.8F02.170.002

393

450

140

607.8F02.174.002

393

450

200

607.8F02.172.002

416

450

140

607.8F02.178.002

416

450

200

607.8F02.176.002

1 Set Download supporting documentation from the Titus Tekform website titustekform.com.au

9.22

Kitchen Accessories Kitchen Towel Rails

Arms

Tea Towel Rail

1 Pce

Finish

Item number

side fixed 2

380

White

607.8G03.880.200

side fixed 3

380

White

607.8G03.885.200

470

Chrome

607.8G03.890.200

300

Chrome

607.8G00.905.300

380

Chrome

607.8G00.905.380

Made of steel

D-shape Tea Towel Rail

1 Pce

Length (mm)

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.23

Width (mm)

Depth (mm)

Tilting Laundry Hamper

Height (mm)

Kitchen Innerware

Laundry Innerware Hampers

Item number

495

406

377

607.8E60.406.007

• •

1 Set

Made of steel with chrome

Laundry Hamper for Drawers

600 • •

1 pce

370

460

607.8E60.307.001

Mounts to drawer front and base White powder coated finish

Made of steel

Swivel Ironing Board

1380 •

• •

1 Set

Includes flap stay Chrome finish

140

340

607.8E46.138.020

Swivel pull-out ironing board with easy out and integrated soft close. Includes frame and ironing board For External Cabinet Width min. 200mm

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.24

Drawer Inserts Kombi Cutlery Trays • • •

1 Pce

400

441-500 301-350

607.8F22.040

450

441-500 351-400

607.8F22.045

450

441-500 351-400

607.8F22.045

201

450

474

607.8F22.045

211

450

370-440 351-400

607.8F22.045

378

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.25

White

Metallic

607.8F22.040

Width (mm)

441-500 301-350

202

201

Made of plastic

Kombi Cutlery Trays, 450 Range

1 Pce

400

Item number

Made of plastic

White Kombi Cutlery Tray, 400KO

1 Pce

Depth (mm)

Metallic Kombi Cutlery Tray, 400KO

To suit drawer width (mm)

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Material easy to clean and easily recyclable

202

102

Drawer Inserts Kombi Cutlery Trays • • •

1 Pce

500

441-500 401-450

607.8F22.050

550

441-500 451-500

607.8F22.055

550

441-500 451-500

607.8F22.055

White

Metallic >

Width (mm)

607.8F22.050

202

201

202

Made of plastic

White Kombi Cutlery Tray, 550KO

1 Pce

441-500 401-450

Made of plastic

Metallic Kombi Cutlery Tray, 550KO

1 Pce

500

Item number

Made of plastic

White Kombi Cutlery Tray, 500KO

1 Pce

Depth (mm)

Metallic Kombi Cutlery Tray, 500KO

To suit drawer width (mm)

Kitchen Innerware

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Material easy to clean and easily recyclable

201

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.26

Drawer Inserts Kombi Cutlery Trays • • •

1 Pce

202

600

370-440 501-550

607.8F22.060

102

600

374

607.8F22.060

112

600

441-500 501-550

607.8F22.060

201

600

481

607.8F22.060

211

650

441-500 551-600

607.8F22.065

201

518

535

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.27

White

Metallic

607.8F22.060

Width (mm)

441-500 501-550

Made of plastic

White Kombi Cutlery Tray, 650KO

1 Pce

600

Item number

Made of plastic

White Kombi Cutlery Trays, 600KO

1 Pce

Depth (mm)

Metallic Kombi Cutlery Trays, 600 Range

To suit drawer width (mm)

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Material easy to clean and easily recyclable

Drawer Inserts Kombi Cutlery Trays • • •

1 Pce

607.8F22.070

102

700

441-500 601-650

607.8F22.070

202

700

474

607.8F22.070

211

700

441-500 601-650

607.8F22.070

201

White

Metallic

370-440 601-650

Width (mm)

700

Item number

Made of plastic

White Kombi Cutlery Tray, 700KO

1 Pce

Depth (mm)

Metallic Kombi Cutlery Tray, 700KO

To suit drawer width (mm)

Kitchen Innerware

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Material easy to clean and easily recyclable

619

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.28

Drawer Inserts Kombi Cutlery Trays • •

1 Pce

800

441-500 701-750

607.8F22.080

900

441-500 801-850

607.8F22.090

900

441-500 801-850

607.8F22.090

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.29

Metallic >

Width (mm)

607.8F22.080

202

201

202

Made of plastic

White Kombi Cutlery Tray, 900KO

1 Pce

441-500 701-750

Made of plastic

Metallic Kombi Cutlery Tray, 900KO

1 Pce

800

Item number

Made of plastic

White Kombi Cutlery Tray, 800KO

1 Pce

Depth (mm)

Metallic Kombi Cutlery Tray, 800KO

To suit drawer width (mm)

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Material easy to clean and easily recyclable

White

•

201

Drawer Inserts Kombi Cutlery Trays • • •

1 Pce

102

1000

441-500 901-950

607.8F22.100

202

1000

441-500 901-950

607.8F22.100

Cut to size

374

819

607.8F22.090

112

Cut to size

474

372

607.8F22.045

212

Cut to size

474

519

607.8F22.060

212

Cut to size

474

619

607.8F22.070

212

White

Metallic

607.8F22.090

Width (mm)

370-440 801-850

201

Made of plastic

Metallic Kombi Cutlery Trays, Cut to Size

1 Pce

900

Item number

Made of plastic

Kombi Cutlery Trays, 1000 Range

1 Pce

Depth (mm)

Metallic Kombi Cutlery Tray, 900KOK

To suit drawer width (mm)

Kitchen Innerware

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Material easy to clean and easily recyclable

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.30

Beech

Drawer Inserts Knife Block

Item number

Knife Block To Suit Kombi Cutlery Trays

1 Pce

607.8F22.010

Made of timber

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.31

000

Drawer Inserts Bridge Cutlery Inserts • •

440-500 500-550

607.8F21.060

600

440-500 500-550

607.8F21.060

700

440-500 600-650

607.8F21.070

700

440-500 600-650

607.8F21.070

800

440-500 700-750

607.8F21.080

800

440-500 700-750

607.8F21.080

900

440-500 800-850

607.8F21.090

002

1000

440-500 900-950

607.8F21.100

002

1000

440-500 900-950

607.8F21.100

Item number

White

Anthracite

600

Width (mm)

Depth (mm)

Bridge Cutlery Inserts

To suit drawer width (mm)

Kitchen Innerware

•

Aesthetic appeal with intelligent functionality Made of high-quality environmentally friendly plastic Easy to clean and resistant to daily wear and tear

002 001 002 001 002 001

001

Knife Block Suits Bridge Cutlery Drawer Insert 600-1000 x 440mm 1000

1 Pce

440

500-1000

607.8F21.000

002

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.32

25 Pcs

001

450

362-484 357-445

607.8F03.102

001

550

373-483 482-532

607.8F03.107

001

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.33

White

607.8F03.101

Width (mm)

346-435 306-450

Made of plastic

Cutlery Insert

25 Pcs

450

Item number

Made of plastic

Cutlery Insert

25 Pcs

Depth (mm)

Cutlery Insert

To suit drawer width (mm)

Drawer Inserts Cutlery Inserts

1 Pce

441-500 351-400

607.8F23.045

600

441-500 501-550

607.8F23.600

600

441-500 501-550

607.8F23.600

201

450

430-520 350-390

607.8G23.045

001

600

430-520 500-540

607.8G23.060

001

450

430-520 350-390

607.8G23.045

002

500

430-520 400-440

607.8G23.050

002

600

430-520 500-540

607.8G23.060

002

Grey

White

450

Metallic >

Width (mm)

607.8F23.045

202 201

202

Made of plastic

Grey Spice Trays

1 Pce

441-500 351-400

Made of plastic

White Spice Trays

1 Pce

450

Item number

Made of plastic

Utensil Trays, 600 Range

1 Pce

Depth (mm)

Utensil Trays, 450 Range

To suit drawer width (mm)

Kitchen Innerware

Drawer Inserts Utensil and Spice Trays

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.34

1 Pce

430-520 700-740

607.8G24.080

900

430-520 800-840

607.8G24.090

900

430-520 800-840

607.8G24.090

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.35

Grey

800

White >

Width (mm)

607.8G24.080

002

001

002

Made of plastic

White Spice Tray, 900mm

1 Pce

430-520 700-740

Made of plastic

Grey Spice Tray, 900mm

1 Pce

800

Item number

Made of plastic

White Spice Tray, 800mm

1 Pce

Depth (mm)

Grey Spice Tray, 800mm

To suit drawer width (mm)

Drawer Inserts Spice Trays

001

â&#x20AC;˘ â&#x20AC;˘

Durable and attractive stainless steel Designed to provide a space left or right of the tray for long utensils

Width (mm)

280

607.8E12.208

459

500

280

607.8E12.208

509

550

280

607.8E12.208

559

450

208

607.8E13.208

459

500

208

607.8E13.208

509

550

208

607.8E13.208

559

450

309

607.8E13.308

459

500

309

607.8E13.308

509

550

309

607.8E13.308

559

450

377

607.8E13.377

459

500

377

607.8E13.377

509

550

377

607.8E13.377

559

Made of stainless steel

Cutlery Utensil Organiser, 377mm Range

1 Set

500

Made of stainless steel

Cutlery Utensil Organiser, 309mm Range

1 Set

450

Item number

Made of stainless steel

Cutlery Utensil Organiser, 208mm Range

1 Set

Depth (mm)

1 Set

To suit drawer width (mm)

Triple Cutlery Organiser

Stainless steel

Kitchen Innerware

Drawer Inserts Cutlery and Utensil Organisers

Made of stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.36

Drawer Inserts Utensil Organisers

202

607.8E12.202

459

500

202

607.8E12.202

509

550

202

607.8E12.202

559

450

291

607.8E12.291

459

500

291

607.8E12.291

509

550

291

607.8E12.291

559

450

105

607.8E12.105

459

500

105

607.8E12.105

509

550

105

607.8E12.105

559

Made of stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.37

Stainless steel

450

Made of stainless steel

Single Utensil Organiser

1 Set

450

Item number

Made of stainless steel

Double Utensil Organiser, Large

1 Set

Width (mm)

1 Set

Depth (mm)

Double Utensil Organiser

Durable and attractive stainless steel

To suit drawer width (mm)

â&#x20AC;˘

Drawer Inserts Utensil and Cutlery Tray Ends / Divider

â&#x20AC;˘

1 Set

607.E21.000

100

176

607.E21.000

200

607.E21.000

300

Grey

Made of plastic

Utensil and Cutlery Tray End, Short

1 Set

Item number

Made of plastic

Utensil and Cutlery Tray End, Long

1 Set

Height (mm)

Utensil and Cutlery Tray Divider, Short

Width (mm)

Kitchen Innerware

â&#x20AC;˘

To be used to with stainless steel cutlery and utensil inserts Configure drawer to suit storage requirements

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.38

Waste Bins Single Bins

Tidy Bin

Mounting

Item Number

009

10 L

Door

607.8G03.001 >

280 357 325

10 L

Door

607.8G03.002 >

Door

607.8G03.040 >

001

Automatic opening lid

350 365 515 •

30 L

Cam operated lid

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.39

White

Height (mm)

Capacity

Made of stainless steel and plastic

Tidy Bin

1 Pce

Removable hi-impact bin for easy clearning Right or left opening

280 357 325

•

1 Pce

Width (mm)

Depth (mm)

•

Stainless Steel

•

001

Tidy Bin with Slide Top

Capacity

35 L

Mounting

Item Number

607.8G03.035 >

White

Height (mm)

400 290 510 • • •

1 Pce

Width (mm)

Depth (mm)

Kitchen Innerware

Waste Bins Single Bins

001

Handy slide top provides easy access and saves space Wide mouth rubbish chute for easy use and cleaning  Accepts standard size bin liners

Made of plastic

Tidy Bin, Kitchen

240 290 325

15 L

Door

607.8G03.070 >

001

• Automatic opening lid  • Removable hi-impact plastic bin for easy cleaning • Accepts standard bin liners • Right or left hand opening

1 Pce

Made of plastic

Tidy Bin, Vanity

160 220 242 • • • •

1 Pce

Door

607.8G03.001 >

001

Automatic opening lid  Compact contoured design  For 90º or 110º opening doors Easily removable bucket for simple cleaning

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.40

Waste Bins Pull-out Bins

Twin Enviro Bin

525 320 340

Closed lid position minimises odours Removable hi-impact plastic bins for easy cleaning

White

Height (mm)

Width (mm)

Depth (mm)

•

Grey

•

Capacity

Mounting

Item Number

30 L

Bottom

607.8G03.080 >

001

• Sturdy hi-impact frame • Right or left opening • 2 x 15L buckets

1 Set

Made of plastic

Twin Bin, pull-out with metal frame

480 260 420

30 L

Bottom

607.8G03.030 >

480 260 420

30 L

Bottom

607.8G03.030 >

• Right or left opening • 1 x 20 L bucket and 1 x 10 L bucket

1 Set

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.41

007

Waste Bins Twin and Single Pull-out Bins

•

Closed lid position minimises odours Removable hi-impact plastic bins for easy cleaning

Height (mm)

525 350 340

Capacity

30 L

Mounting

Item Number

White

Twin Bin, pull-out with metal frame

Width (mm)

Depth (mm)

Kitchen Innerware

•

Door

607.8G03.006 >

001

607.8G03.012 >

001

• Door panel attaches directly to bin • 2 x 15 L buckets

1 Set

Made of metal and plastic

Single Pull-out Bin

390 266 345

15 L

Bottom

• Robust pressed metal construction • Mounts on shelf or cupboard base  • Smooth operating ball bearing runners • Easy to install, only 4 screws required

1 Set

Made of metal and plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.42

Waste Bins Single Pull-out Bins • •

Single Pull-out Bin

44 L

Mounting

Item Number

Top or Bottom

607.8G03.015 >

001

607.8G03.015 >

101

607.8G03.014 >

101

Removable divider for waste separation

525 350 475 •

44 L

Door

Removable divider for waste separation

Made of metal and plastic

Single Pull-out Bin

1 Set

Capacity

Made of metal and plastic

Single Pull-out Bin

1 Set

Height (mm)

525 350 475 •

1 Set

Width (mm)

Depth (mm)

•

Closed lid position minimises odours Smooth operating ball bearing runners Robust solid tubular frame Removable hi-impact plastic bin for easy cleaning

525 350 475 44 L

Top or Bottom

Made of metal and plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.43

White

•

Waste Bins Tekform Twin Pull-out Bins • •

Tekform Twin Bin

White

Item Number

30 L

Bottom

607.8G06.030 >

101

36 L

Bottom

607.8G06.036 >

001

30 L

Door

607.8G06.030 >

201

36 L

Door

607.8G06.036 >

201

2 x 18 L bucket

Made of metal and plastic

Tekform Twin Bin

490 340 330 •

2 x 15 L bucket

Made of metal and plastic

Tekform Twin Bin

490 340 380 •

1 Set

Mounting

2 x 15 L bucket

510 340 380 •

1 Set

Capacity

Made of metal and plastic

Tekform Twin Bin

1 Set

Height (mm)

510 340 330 •

1 Set

Width (mm)

Depth (mm)

Kitchen Innerware

•

Closed lid position minimises odours Sturdy metal hi-impact frame Removable hi-impact plastic bin for easy cleaning

2 x 18 L bucket

Made of metal and plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.44

Waste Bins Tekno Softclose Bins •

Tekno Bin with softclose

Height (mm)

513 368 563 •

1 Set

Width (mm)

Depth (mm)

•

Capacity

35 L

To suit 400mm outside cabinet width Bins suitable for use with Tekform drawer

Mounting

Closing

Item Number

Door

Soft Close 607.8G06.300.040

Door

Soft Close 607.8G06.302.040

Door

Soft Close 607.8G06.304.040

Includes 1 x 35L bucket

Made of metal and plastic

Tekno Twin Bin with softclose

513 368 463

36 L

• Includes 2 x 18L buckets

1 Set

Made of metal and plastic

Tekno Twin Bin with softclose

513 368 333

26 L

•  Includes 2 x 13 L buckets

1 Set

Made of metal and plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.45

Waste Bins Tekno Softclose Bins Bins suitable for use with Tekform drawer

Tekno Twin Bin with softclose

Height (mm)

Width (mm)

Depth (mm)

Kitchen Innerware

•

513 368 463

Capacity

Mounting

31 L

Closing

Item Number

Soft Close 607.8G06.306.040

• To suit 400mm outside cabinet width • Includes 1 x 18L bucket and 1 x 13L bucket

1 Set

Made of metal and plastic

Tekno Twin Bin with softclose

513 568 563

70 L

607.8G06.307.040

• To suit 600mm outside cabinet width • Includes 2 x 35L buckets

1 Set

Made of metal and plastic

Spare Tekno Softclose 400mm Bin Frame 513 368

Soft Close 607.8G06.308.040

Spare Tekno Softclose 600mm Bin Frame 513 568

Soft Close 607.8G06.309.040

Spare Tekno Bin Bucket

18L

607.8G06.310.180

Spare Tekno Bin Bucket

13 L

607.8G06.309.130

Spare Tekno Bin Bucket

35 L

607.8G06.309.350

• Spare buckets to be used as replacements with Tekno Bin Frame

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

9.46

Waste Bins Hole in One Benchtop Bin • • •

Diameter cut-out (Ømm)

•

Hole in One Benchtop Bin

1 Set

Capacity

210

10 L

Made from high quality stainless steel Easily fitted into new or existing benchtops Accommodates standard type bags Snug fitting lid seals in unwanted odours

Item Number

607.8G03.013.001

Made of stainless steel

Benchtop Bin Cover

272

607.8G03.010.001

• Bin Insert not included

1 Set

Made of stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.47

x.1

Stefano Orlati LED Lighting

Stefano Orlati Lighting Product guide

Information Page

LED Lighting Made to measure program

10.2 10.15

LED Downlights Page

Imperia Downlight Tile Light

10.5 10.6

LED Strip Lights Page

Information

10.7

12v Strip Lighting

10.9

24v Strip Lighting

10.12

RGBW Controller

10.14

LED Light Accessories Page

10.1

LED Profiles

10.15

LED Sensors

10.24

DIY Accessories

10.30

Transformers

10.33

Stefano Orlati Lighting Information

LED Lighting is an extremely effective design tool which can be used to transform and enhance a space. Stefano Orlati lighting options offer both functional and decorative applications – With its key roles being task & mood Lighting There are so many clever ways to incorporate LED lighting into an interior scheme. In the kitchen the addition of under-cabinetry lighting can enhance & open up a space. In the bathroom practical lighting can be incorporated such as ensuring the mirror is well lit or using a Dimmer to control the brightness and mood of the space. Using strip lights or downlights in an open shelf or an entertainment unit is a great accent lighting option which can elevate & highlight the space. LED Lighting is safe, environmentally friendly & contains no toxic mercury. It uses approx 85% less energy than halogen or incandescent lights.

Benefits

• Energy Efficient • Low Maintenance • Contains no mercury or lead • Emit no UV Rays or infrared radiation • Achieves full brightness in microseconds • Operates at a much cooler temperature making them safer than incandescent lights • Environmentally friendly – cuts greenhouse gas emissions and reduces landfill • Lifetime of approx 30,000 to 60,000 or more hours depending on the type of LED Light

Lighting Product Warranty

All Stefano Orlati lighting products offer you the warranties extended to you under consumer protection legislation. Our warranty is for one year from the date of purchase. The warranty is void if the lighting products are used with a transformer sourced from another supplier.

10.2

LED Lighting

Features

Stefano Orlati Lighting Information

Frequently Asked Questions

Why LED’s? LED Lighting uses 85% less electricity than typical incandescent and fluorescent light sources. LED’s provide us with the most efficient way to save energy and conserve our natural resources. The light produced from an LED is an even spectrum and can last beyond 10 years (30,000 – 60,000 hours or more). What does LED mean simply? LED = Light emitting diode, which are “solid-state lighting” components. Each individual LED consists of a semiconductor diode that emits light when a voltage is applied to it. Does turning LED lights on and off reduce lifetime? No. Unlike incandescent and fluorescent lighting which will fail sooner when switched on or off more often, LED lighting is unaffected by how often it is switched on or off. Do LED lights produce UV and/or IR emissions or contain Mercury? No. LED Lighting Products typically produce virtually no light in the Ultraviolet (UV) or Infrared (IR) spectrums. LED bulbs do not contain mercury. They can actually be recycled as they do not contain hazardous substances and are manufactured without hazardous substances. Can LED lights be dimmed? Yes, most of our range of LED lights can be dimmed – refer to the dimmer controller on page 10.27-10.28. Do the LED Diodes need to be replaced? An LED diode does not “burn out” like a conventional lamp, so individual diodes do not need to be replaced. Do LED’s overheat? LED’s consume significantly less energy and operate at lower temperatures than typical incandescent bulbs. Most of the energy emitted from an incandescent bulb is converted into heat instead of light which is why you’ll burn yourself if you try to touch it once it’s turned on. In many cases you can actually feel the temperature difference just by being near the light. The beam of light source from an LED is cool however waste heat is produced within the LED itself during the conversion of electricity into light. The waste heat must be properly removed from the light to maximize fixture performance and to avoid damage to the LED’s. This is why all LED Strip light options are recommended to be used in conjunction with an LED Profile. The LED Profiles are well designed lighting fixtures which act as heat sinks to draw heat away from the LED’s and dissipate into the air surrounding the profile thus prolonging the life of the LED diodes. Is LED a different type of light? Yes. LED Light is said to be a safer, healthier light. Because LED’s do not produce any form of ultraviolet radiation which causes colour fading in art & fabric such as carpet fading etc. With LED Lights there is no buzzing or flickering.

10.3

LED Lighting

Stefano Orlati Lighting Information

LED Symbol Guide

Made to Measure MTM

Door Motion Sensor DOOR

Do It Yourself DIY

Hand Motion Sensor HAND

Dimmer Control DIM

PIR Motion Sensor PIR

LED Profile PROFILE

Touch Dimmer TD

Order Forms

As a helpful guide when ordering request an LED lighting order form or call us to discuss your requirements

Download order forms online â&#x20AC;&#x201C; www.titustekform.com.au

10.4

Stefano Orlati Lighting LED Downlights

Options DIM

•

Item number

Downlight

IMPERIA >

Bracket

IMPERIA-BRACKET

Ø54.0

Ø62.0

12.5

Recess Mount

Ø62.0 Surface Mount

Lamp Shape

Round

Finish

Silver

Lamp Wattage

3.2W

Lamp Voltage

12V

Mounting

Recess or Surface

Main Cable

2.0m

Dimmable

Yes

Lumens (per/m) 260 to 300 Beam Angle

120°

Connection

Transformer 100 - 240V, 2 meters

Lifetime

30,000 hours

Transformer

Constant Voltage 12V 12V - 25W runs up to 6 x Lights

When using downlight in conjunction with a sensor option refer to capacity guide. See page > 10.29

10.5

Cool White or Warm White Plug & play installation Can be used in conjunction with sensors & dimmer control

Technical and mounting details Imperia Downlight

PIR

Warm White

•

HAND

Cool White

•

DOOR

• •

Technical and mounting details Tile Light

Cool white Plug & play installation In-built hand sensor on one tile light which controls up to four tile lights

Item number

Cool White

•

TILE >

CW-KIT

Kit contains: 3 x tile lights and 1 x transformer

Hand Sensor

Lamp Shape

Rectangle

Finish

Silver

Lamp Wattage

2.5W

Lamp Voltage

12V

Mounting

Surface

Main Cable

1.8m

Dimmable

Lumens (per/m) 200 - 230 Beam Angle

120°

Connection

Transformer 100 - 240V, 2 meters

Lifetime

30,000 hours

Transformer

Constant Voltage 12V 12V - 25W - Runs up to 4 x Lights

10.6

LED Downlights

Stefano Orlati Lighting LED Downlights

Stefano Orlati Lighting LED Strip Lights

Products And Services LED Strip Lights are a brilliant option for task and mood lighting and help to create ambiance and definition of a space. Some areas of application include kitchen & bathroom lighting, underneath cabinetry, shopfitting & display lighting, signage, architectural lighting, and any other confined spaces requiring additional light.

Task Lighting

Decorative Lighting

Enhance the strip light by adding an LED Profile Option

What Are Your Options With LED Strip Lights?

MTM

Made to Measure (MTM) Custom made lengths fabricated by us to your measurements. Each MTM strip light includes a soldered 2m tail or wire connectors for corners etc (depending on requirements)

DIY

Do It Yourself (DIY) Choose your LED components and fabricate yourself DIY strip lights are available in 5m rolls and include a tail soldered on each end.

Ordering

MTM All MTM codes are specified on each product. When ordering MTM strip lighting, please order using the following code string for example: SPECIFY MEASUREMENTS [….] CODE: MTM-3528-CW Order Forms

As a helpful guide when ordering request an LED lighting order form or call us to discuss your requirements Download order forms online – www.titustekform.com.au

10.7

DIY All DIY codes are specified on each product. When ordering DIY strip lighting please order using the following code string for example: SPECIFY QUANTITY [….] CODE: DIY-3528-CW

IP Rating IP is a rating guide for the strip light for the level of protection from Solids/Water. Stefano Orlati strip lights are available in IP20 & IP65. IP = Ingress Protection IP20 - No Coating 2 = Protected against solid objects over 12.5mm 0 = No Protection from liquids/water

IP65 - Clear Water Resistant Coating 6 = Total protection against dust ingress 5 = Protection against low pressure water jets from all directions. Limited ingress protection

Diode Guide The diodes on the LED Strip light range in size and each will vary in brightness depending on a number of factors • The size of the diode • The amount of diodes per meter • The total watts per meter 3014 = 3.0mm x 1.4mm (diode size)

3528 = 3.5mm x 2.8mm (diode size)

5050 = 5.0mm x 5.0mm (diode size)

LED Symbol Guide

Made to Measure MTM

Door Motion Sensor DOOR

Do It Yourself DIY

Hand Motion Sensor HAND

Dimmer Control DIM

PIR Motion Sensor PIR

LED Profile PROFILE

Touch Dimmer TD

10.8

LED Strip Lights

Stefano Orlati Lighting LED Strip Lights

Options MTM

•

Technical and mounting details 12V 3528 Standard IP20

Plug & play installation Cuttable in 50mm increments Self adhesive peel and stick backing Best suited for an area hidden from view Choose any LED Profile option Recommended to be used in conjunction with an LED profile which assists with heat dissipation & ensures longevity of the LED diodes

Item number

COOL WHITE (6000K)

WARM WHITE (3200K)

BLUE

RED

GREEN

AMBER

Amber

•

PIR

Green

•

HAND

DOOR

Red

•

PROFILE

Blue

•

DIM

Warm White (3200k)

•

DIY

Cool White (6000k)

Stefano Orlati Lighting LED Strip Lights

MTM-3528 >

BLUE

RED GREEN AMBER

DIY-3528 >

BLUE

RED GREEN AMBER

Diode Size

3.5mm x 2.8mm

Diodes (per/m)

Voltage

12V DC

Energy (watts)

4.8 per/m

Width

8mm

Projection

3mm

Viewing Angle (degrees)

120

Waterproof Rating

IP20

Dimmable

Yes

Lumens (per/m) Cool White - 300 Warm White - 300 Amber - 65 Blue - 45 Green - 200 Red - 110 Transformer 12V

Maximum run 10 meters

DIY

All DIY components are supplied separately and are recommended for strip light only options (no profile). Available in a 5 meter roll & includes a tail soldered on each end. * If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.29

10.9

Options MTM

• • • •

Technical and mounting details 12V 3528 Water Resistant IP65

DOOR

HAND

PIR

Plug & play installation Cuttable in 50mm increments Self adhesive peel and stick backing Best suited for an area hidden from view Clear water-resistant coating Recommended for strip light only options

Item number

COOL WHITE (6000K)

WARM WHITE (3200K)

MTM-3528-IP65 >

DIY-3528-IP65 >

Diode Size

3.5mm x 2.8mm

Diodes (per/m)

Voltage

12V DC

Energy (watts)

4.8 per/m

Width

8mm

Projection

3mm

Viewing Angle (degrees)

120

Waterproof Rating

IP65

Dimmable

Yes

Lumens (per/m) Cool White - 300 Warm White - 300 Transformer 12V

Maximum run 10 meters

DIY

10.10

LED Strip Lights

•

DIM

Warm White (3200k)

•

DIY

Cool White (6000k)

Stefano Orlati Lighting LED Strip Lights

Options MTM

• • •

Technical and mounting details 12V 5050 Extra Bright IP20

DOOR

HAND

PIR

Up to three times brighter than 3528 Standard Strip light Plug & play installation Cuttable in 50mm increments Self adhesive peel and stick backing Recommended to be used in conjunction with an LED profile which assists with heat dissipation & ensures longevity of the LED diodes

Item number

MTM-5050 >

COOL WHITE (6000K)

WARM WHITE (3200K)

Warm White (3200k)

•

PROFILE

Cool White (6000k)

•

DIM

Diode Size

5.0mm x 5.0mm

Diodes (per/m)

Voltage

12V DC

Energy (watts)

14.4 per/m

Width

10mm

Projection

3mm

Viewing Angle (degrees)

120

Waterproof Rating

IP20

Dimmable

Yes

Lumens (per/m) Cool White - 900 Warm White - 900 Transformer 12V

Maximum run 4 meters

* If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.29

10.11

Options

• • • • •

Technical and mounting details 24V 3014 Continuous IP20

DIM

DOOR

HAND

PIR

Offers high brightness with a continuous glow Provides a no dotting effect when used with an LED profile Plug & play installation Cuttable in 30mm increments Self adhesive peel and stick backing Recommended to be used in conjunction with an LED Profile which assists with heat dissipation & ensures longevity of the LED diodes

Item number

MTM-3014 >

COOL WHITE (6000K)

WARM WHITE (3200K)

Warm White (3200)

•

PROFILE

Diode Size

3.0mm x 1.4mm

Diodes (per/m)

204

Voltage

24V DC

Energy (watts)

16.3 per/m

Width

10mm

Projection

3mm

Viewing Angle (degrees)

120

Waterproof Rating

IP20

Dimmable

Yes

Lumens (per/m) 1590 to 2040 Transformer 24V

Maximum run 5 meters

* If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.29

10.12

LED Strip Lights

MTM

Cool White (6000k)

Stefano Orlati Lighting LED Strip Lights

Options MTM • • •

• •

•

Technical and mounting details 24V 5050 RGBW Multi Colour

PROFILE

Recommended for decorative feature lighting Cuttable in 170mm increments Produces an array of dazzling effects with 20 different mode settings Alternates between all LED colours, including cool white Memory function - previous setting will be resumed when power on again Recommended to be used in conjunction with an LED profile which assists with heat dissipation & ensures longevity of the LED diodes

Multi Colour

Stefano Orlati Lighting LED Strip Lights

Item number

MTM-5050 >

RGBW

Diode Size

5.0mm x 5.0mm

Diodes (per/m)

Voltage

24V DC

Energy (watts)

10 per/m

Width

10mm

Projection

3mm

Viewing Angle (degrees)

120

Waterproof Rating

IP20

Dimmable

Yes

Lumens (per/m) 700 Transformer 24V

Maximum run 5 meters

To be use in conjunction with RGBW Multi Colour Controller. > see page 10.14

* If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.29

10.13

Stefano Orlati Lighting LED Strip Lights •

Used to activate the RGBW 5050 multi colour strip light Controller is supplied separately to the strip light

LED Strip Lights

•

Technical and mounting details RGBW Multi Colour Controller

Item number

RGBW-CCU Includes: remote, batteries, wall mount bracket

REMOTE Size

110 x 52 x 20

Power

AAA Batteries *2pcs

Size

85 x 45 x 23

Working Voltage 24V CONTROLLER Control Way

RGBW

Max Load

144 watts

Control Distance 30 meters

Used to activate and control the RGBW Multi-colour strip Light. > see page 10.13

10.14

Stefano Orlati Lighting LED Profiles

Products And Services LED Profiles transform the LED Strip light into a complete lighting fixture which gives a stylish & finished look. They assist with heat dissipation of the strip light and ensure longevity of the LED diodes. The profile is composed of an aluminium backing & perspex diffuser which preserves & protects the strip light. Clear diffuser options provide maximum illumination & Opaque Diffusers work by diffusing the light. What Are Your Options With LED Profiles? Made to Measure (MTM) All Made to Measure orders are fabricated by us to your measurements. The profile includes diffuser, end caps mounting clips (if applicable) & LED strip light option. For any in depth lighting orders it is recommended to supply by a sketch or plan.

MTM

Do It Yourself (DIY) Choose your own LED components and fabricate yourself. All DIY components are supplied separately. DIY

Ordering MTM When ordering Made to Measure lighting, please order using the following code string, for example: Made to Measure MTM | Profile & Diffuser Option SLIM-OP | Strip Light Option / Colour 3528-CW CODE: MTM-SLIM-OP-3528-CW Use the table below as a reference guide for strip lights colours and options. STRIP LIGHT OPTIONS / COLOURS Strip Light Option/Colour

Code

Strip Light Option/Colour

Code

3528 Cool White

3528-CW

5050 Cool White

5050-CW

3528 Warm White

3528-WW

5050 Warm White

5050-WW

3528 Amber

3528-AMBER

3014 Cool White

3014-CW

3528 Blue

3528-BLUE

3014 Warm White

3014-WW

3528 Green

3528-GREEN

5050 RGBW Multi Colour

5050-RGBW

3528 Red

3528-RED

DIY All DIY codes are specified on each product. When ordering DIY LED Profiles please order using the following code string for example: SPECIFY QUANTITY [….] CODE: DIY-SLIM-OP *For further information on LED strip light options (refer to pages 10.9-10.13) Order Forms

As a helpful guide when ordering request an LED lighting order form or call us to discuss your requirements Download order forms online – www.titustekform.com.au

10.15

Stefano Orlati Lighting LED Profiles

• • •

Technical and mounting details

Recess mount installation Supplied with an opaque or clear diffuser Profile can be screwed or glued into rebate Recess depth 7mm

Item number

LED Slimline

LED Profiles

•

Description

MTM-SLIM-CL [Insert strip light option and colour - refer to table on page 10.15] MTM-SLIM-OP [Insert strip light option and colour - refer to table on page 10.15] 24mm 8mm

6mm

DIY-SLIM-CL

Clear Diffuser

DIY-SLIM-OP

Opaque Diffuser

17.5mm

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 2m length & includes end caps. All DIY components are supplied separately. * Note: DIY connectors do no fit into the slimline profile

10.16

Stefano Orlati Lighting LED Profiles • • • •

Technical and mounting details LED Corner

Surface mount installation Supplied with an opaque or clear diffuser Top or side fixing Profile can be screwed on, glued or clipped on using mounting clips.

Item number

Description

MTM-CORNER-CL [Insert strip light option and colour refer to table on page 10.15] MTM-CORNER-OP [Insert strip light option and colour refer to table on page 10.15] 18mm

18mm

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 2m length & includes end caps and mounting clips. All DIY components are supplied separately.

10.17

DIY-CORNER-CL

Clear Diffuser

DIY-CORNER-OP

Opaque Diffuser

Stefano Orlati Lighting LED Profiles • • •

LED Profiles

•

Surface or recess mount installation Supplied with an opaque or clear diffuser Profile can be glued, screwed or clipped on using mounting clips supplied Recess depth 7mm

Technical and mounting details LED Micro

Item number

Description

MTM-MICRO-CL [Insert strip light option and colour refer to table on page 10.15] MTM-MICRO-OP [Insert strip light option and colour refer to table on page 10.15]

8mm

17.5mm

DIY-MICRO-CL

Clear Diffuser

DIY-MICRO-OP

Opaque Diffuser

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 2m length & includes end caps and mounting clips. All DIY components are supplied separately. * Note: DIY connectors do no fit into the micro profile

10.18

Stefano Orlati Lighting LED Profiles • • •

•

Technical and mounting details LED Square Fusion

Surface or recess mount installation Supplied with an opaque or clear diffuser Profile can be glued, screwed or clipped on using mounting clips supplied Recess depth 10mm

Item number

Description

MTM-SQ-CL [Insert strip light option and colour - refer to table on page 10.15] MTM-SQ-OP [Insert strip light option and colour - refer to table on page 10.15]

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 2m length & includes end caps and mounting clips. All DIY components are supplied separately. *Note: DIY connectors do not fit into the square profile

10.19

DIY-SQ-CL

Clear Diffuser

DIY-SQ-OP

Opaque Diffuser

Stefano Orlati Lighting LED Profiles • • •

LED Profiles

•

Surface or recess mount installation Supplied with an opaque or clear diffuser Profile can be glued screwed or clipped on using mounting clips supplied Recess depth 9mm

Technical and mounting details LED Rectangle

Item number

Description

MTM-REC-CL [Insert strip light option and colour - refer to table on page 10.15] MTM-REC-OP [Insert strip light option and colour - refer to table on page 10.15] 14mm

20mm

DIY-REC-CL

Clear Diffuser

DIY-REC-OP

Opaque Diffuser

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 1.5m length & includes end caps and mounting clips. All DIY components are supplied separately. *Note: DIY connectors do not fit into the rectangle profile

10.20

Stefano Orlati Lighting LED Profiles • • • •

Technical and mounting details

Item number

LED Wardrobe Rail Light

Description

30.0

MTM-ROBE [Insert strip light option and colour - refer to table on page 10.15]

14.6

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 2m length & includes end caps. All DIY components are supplied separately. *Note: DIY connectors do not fit into the wardrobe profile

10.21

Material - aluminium Supplied with an opaque diffuser Middle support brackets & end caps available Can be supplied as a hang rail option only (without strip light)

DIY >

ROBE

ROBE-EB

End Bracket

ROBE-MB

Middle Bracket

• • •

Technical and mounting details LED Glass Profile

Supplied to fit 8mm glass (glass not included) Best suited for glass with an opaque front edge Recommended to be used with 3528 standard strip light options

Item number

Description

MTM-GLASS [Insert strip light option and colour - refer to table on page 10.15] DIY >

GLASS

8mm 8mm

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 2m length. All DIY components are supplied separately. *Note: DIY connectors do not fit into the glass profile

10.22

LED Profiles

Stefano Orlati Lighting LED Profiles

Stefano Orlati Lighting LED Profiles • •

LED Profile

•

Material - aluminium Supplied with an opaque diffuser & end caps Provides easy installation with mounting clips

Technical and mounting details LED Wall

Item number

MTM-WALL [Insert strip light option and colour - refer to table on page 10.15] DIY >

25mm

90mm

15mm 22mm

MTM

As a helpful guide when ordering refer to the Made to Measure order form

DIY

Supplied in a 2m length & includes end caps and mounting clips. All DIY components are supplied separately. *Note: DIY connectors do not fit into the wall profile

10.23

Description

WALL

Stefano Orlati Lighting LED Sensors

DOOR

• • •

LED Sensors

•

Colour - White Plug & play installation Open and close door to activate and deactivate Compatible with Imperia downlight, 3528 & 3014 strip light options

Technical and mounting details Door Sensor

18.5 7.5 23.0

Description

SS-D-SINGLE

Single Sensor

SS-D-DOUBLE

Double Sensor

Detection Area

Approx. detection 100mm

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

24W or 48W

Mounting

Surface

65.0

Controller Box

Sensor

Item number

9.0 13.0

* For sensor switch capacity guide See page > 10.29

10.24

Stefano Orlati Lighting LED Sensors

HAND

• • •

•

Technical and mounting details Hand Sensor

30.0

Colour - White Plug & play installation Wave hand within detection range to activate and deactivate Compatible with Imperia downlight, 3528 & 3014 strip light options

Item number

Description

SS-H

Single Sensor

Detection Area

Approx. detection 100mm

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

24W or 48W

Mounting

Surface or recess

Recess Depth

14mm

Specifications: Specifications:

20.0

16mm

15.0

Product ProductName: Name:Movement MovementSensor SensorSwitch Switch Recess Product Productdescription: description:This ThisMovement MovementSensor SensorSwitch Switchisisan anexclusively exclusivelydesign designfor forClass ClassIIIDiameter IIIinsulation insulationappliance. appliance. Function Functiondescription: description:when whenthe thetarget targetobject objectisisininthe thedetecting detectingrange rangeone onetime, time,the thelamp lampswitches switcheson on(off), (off), Surface Mount when whenthe thetarget target objects objectsisisininthe thedetecting detectingrange rangesecond secondtime, time,the thelamp lampwill willbe beswitch switchoff(on). off(on). Measurement WW oo rkriknin ggVV oo lta lta gg ee

DD CC 11 22 VV

DD CC 22 44 VV

MM aa xixm im uu mmLL oo aa dd

22 44 WW

44 88 WW

QQ uu ieie scse ce nn t tCC uu rrrere nn tt

66 mm AA

Working WorkingTemperature Temperature

00 -20 -20——+45 +45 CC

EE ffe ffe ctcivtie veRR aa nn gg ee

<< 11 55 CC MM

Installation InstallationInstructions: Instructions: 1.1.As Asshown shown

Recessed mount

Surface mount

<10cm <10cm

Recess depth 14mm

* For sensor switch capacity guide See page > 10.29

10.25

Stefano Orlati Lighting LED Sensors • • •

•

Technical and mounting details

Item number

Description

SS-PIR-SINGLE

Single Sensor

SS-PIR-DOUBLE

Double Sensor

Detection Area

Approx. detection 1m

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

24W or 48W

Mounting

Surface or recess

Recess Depth

11mm

Recess Diameter

16mm

9.0

20.0

PIR Sensor

Colour - White Plug & play installation Move in and out of detection range to activate and deactivate Compatible with Imperia downlight, 3528 & 3014 strip light options

Specifications: Specifications: Specifications: Measurement

W V aggee WoW rkooirnrkkgiinnVggoV lto aolglttae

D1C C 122V V DCD 21V

M m moLa Lod oaadd MaM xa iam xxiuim muum L

244W W 242W

D2C C 244V V DCD 42V

21.0

488W W 484W

mA A 0.600m ..66Am Controller Box

Q nttuC C QuQ ieuusiie cee sscncetenC rruuerrnrretenntt

mA A 0.600m ..66Am

Working Temperature Working Working Temperature Temperature

0 00 -20 — +45 -20-20 —— +45 +45 CC C

EffE E efcfffe teivcce ttiivvR eeaR R nag ane nggee

<1<< .511M ..55M M

Detection Detection Detection Angle Angle Angle

o oo 110 110 110

111 011o100oo

DeD D laeeyllaaTyyim TTieim mee

454s455ss

0 00 -20-20 -20 —— — +45 +45 +45 CC C

454s455ss

Recessed mount Detection Detection Detection Area Area Area

13.0

30.0

Product Product Product Name: Name: Name: 96638/96638B 96638/96638B 96638/96638B PIR PIR PIR Sensor Sensor Sensor Switch Switch Switch Product Product Product description: description: description: This This This type type type of of PIR of PIR PIR sensor sensor sensor switch switch switch is an is is an an exclusively exclusively exclusively design design design forfor for class class class III III insulation III insulation insulation appliance. appliance. appliance. Function Function Function description: description: description: When When When detected detected detected thethe the human human human body body body move move move within within within thethe the detection detection detection range, range, range, thethe the switch switch switch willwill will turn turn turn on,on, on, 65.0 when when when thethe the body body body left left left the the the detection detection detection range range range for for for 45s, 45s, 45s, the the the switch switch switch will will will turn turn turn off off off automatically. automatically. automatically. Surface Mount

Surface mount

ø16 ø16 ø16

<1m <1m

Recess depth 11mm

* For sensor switch capacity guide See page > 10.29

10.26

LED Sensors

PIR

Stefano Orlati Lighting LED Sensors

• • • •

•

Technical and mounting details Touch Dimmer

Plug & play installation On/Off switch function Activated by touch Compatible with Imperia downlight and 3528 & 3014 strip light options Silver colour

Item number

SS-DIM >

ø 30.5

Surface Mount

Touch Dimmer

Input voltage

DC 12V/24V

Output voltage

DC 12V/24V

Loading Power

24W/48W

IP Rated

IP44

Recess Depth

14mm

Recess Diameter

24mm

Detection Area

By touch

Mounting

Surface or recess mount

16.0

ø 24

Recess Mount

ø 10 mm hole

Installation

* For sensor dimmer control guide See page > 10.29

10.27

Stefano Orlati Lighting LED Sensors • • • •

•

Technical and mounting details Dimmer Controller

Colour - White Plug & play installation On/Off switch function Dimmer control includes – controller, remote/batteries & mounting bracket for remote Compatible with Imperia downlight, 3528, 3014 & 5050 strip light options

Item number

LED-DIM >

Dimmer Controller

Includes: remote, batteries, wall mount bracket

RF Touch Remote

2.4 GHz

Receiving Range

30 meters

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

60W (12V) or 120W (24V)

Dimensions of Control Box

85mm x 45mm x 22mm

Dimensions of Remote

114mm x 56mm x 20mm

* For sensor dimmer control guide See page > 10.29

10.28

LED Sensors

DIM

Stefano Orlati Lighting LED Sensors •

• • •

Technical and mounting details WiFi Controller

Allows you to operate the LED lights with a smart phone or tablet as your remote Additional accessory to the RGBW & dimmer control units Colour - White Plug & play installation

Item number

Description

WIFI-CU

WiFi Controller

RF Touch Remote

2.4 GHz

Working Voltage

12V or 24V

Receiving Range

20 meters

Loading Power

DC 5V - by USB or power adapter

Dimensions of Control Box

90mm x 65mm x 16mm

Dimensions of Remote

113mm x 56mm 20mm

Sensor Capacity Guide Hand Sensor / Door Sensor / PIR Sensor / Touch Dimmer Product

Capacity (maximum run)

12V - Imperia downlights

4 x downlights (including 2m tail leading to transformer)

12V - 3528 Standard strip light

4.0 meters (including 2m tail leading to transformer)

12V - 5050 Extra bright strip light

1.5 meters (including 2m tail leading to transformer)

24V - 3014 Continuous strip light

2.0 meters (including 2m tail leading to transformer)

Dimmer Control Product

Capacity (maximum run)

12V - Imperia downlights

6 x downlights (including 2m tail leading to transformer)

12V - 3528 Standard strip light

10 meters (including 2m tail leading to transformer)

12V - 5050 Extra bright strip light

4.0 meters (including 2m tail leading to transformer)

24V - 3014 Continuous strip light

5.0 meters (including 2m tail leading to transformer)

10.29

• • •

Compatible with 3528 standard strip light only Connector dimensions - (L) 16mm x (W) 12mm DIY components are recommended for strip light only options (no profile)

Item number

DIY Connector

DIY-CONNECT

Length (Mtr)

Note: Connectors are not recommended for use with LED profiles

DIY Tail

DIY-TAIL

Note: Connectors are not recommended for use with LED profiles

10.30

LED DIY and Accessories

Stefano Orlati Lighting LED DIY and Accessories

Stefano Orlati Lighting LED DIY and Accessories Compatible with 3528 standard strip light only Connector dimensions – (L) 16mm x (W) 12mm DIY components are recommended for strip light only options (no profile)

• • •

Item number

DIY Corner Connector

DIY-CORNER •

Length (Mtr)

40mm wire between connectors

Note: Connectors are not recommended for use with LED profiles

Extension Cable

EXT

2m extension lead can be used with LED Downlights and LED strip lights (except RGBW-strip lights)

10.31

•

12V-25W Transformer

Protections - short circuit / overload / over voltage / over temperature Option of 25W or 60W depending on application requirements – see LED compatibility All transformers are supplied with a 6-way junction box

Item number

Description

TF-25-12

12V-24W Transformer

AC Input Voltage

100-240VAC - 50/60Hz , 1.0A Max

DC Output

12V DC 2.08A Constant Voltage

Output Watts Max

25 Watts

Dimensions

(L) 100mm (W) 47mm (H) 27mm

Power Input Cord

1.5m

LED Compatibility

Imperia downlight, Tile light, 3528 standard strip light, Sensor switches

Transformer Capacity Guide 12V-25W Transformer LED Downlights/ Strip lights

Per 25W Transformer (no sensors attached)

Imperia downlight

6 x downlights (including 2m tail leading to transformer)

Tile light

4 x Tile lights (including 1.8m tail leading to transformer)

3528 Standard strip light

5.0 meters (including 2m tail leading to transformer)

5050 Extra bright

1.5 meters (including 2m tail leading to transformer)

Refer to sensor and controller capacity guide, See page > 10.29

10.32

LED Transformers

Stefano Orlati Lighting LED Transformers

Stefano Orlati Lighting LED Transformers •

•

12V-60W Transformer

Item number

Description

TF-60-12

12V-60W Transformer

AC Input Voltage

100-240VAC - 50/60Hz 1.5A Max

DC Output

12VDC 5.0A Constant Voltage

Output Watts Max

60 Watts

Dimensions

(L) 117mm (W) 51mm (H) 35mm

Power Input Cord

1.5m

LED Compatibility

3528 Standard, 5050 Extra bright

Transformer Capacity Guide 12V-60W Transformer LED Strip lights

Per 60W Transformer (no sensors attached)

3528 Standard strip light

10 meters (including 2m tail leading to transformer)

5050 Extra bright strip light

4.0 meters (including 2m tail leading to transformer)

Refer to sensor and controller capacity guide, See page > 10.29

10.33

•

Protections – short circuit / overload / over voltage / over temperature All Transformers are supplied with a 6-Way Junction Box

Item number

Description

TF-60-24

24V-60W Transformer

24V-60W Transformer AC Input Voltage

110-240VAC, 50/60Hz, 1.4A

DC Output

24V DC 2.50A Constant Voltage

Output Watts Max

60 Watts

Dimensions

(L) 125mm (W) 50mm (H) 31.5mm

Power Input Cord

1.5m

LED Compatibility

3014 continuous & 5050 RGBW multi colour strip light options

Transformer Capacity Guide 24V-60W Transformer LED Strip lights

Per 60W Transformer (no sensors attached)

3014 Continuous strip light

3.5 meters (including 2m tail leading to transformer)

5050 RGBW Multi colour strip light

4.0 meters (including 2m tail leading to transformer)

Refer to sensor and controller capacity guide, See page > 10.29

10.34

LED Transformers

Stefano Orlati Lighting LED Transformers

Stefano Orlati Lighting LED Transformers •

•

24V-90W Transformer

Protections – short circuit / overload / over voltage / over temperature All Transformers are supplied with a 6-Way Junction Box

Item number

Description

TF-90-24

24V-90W Transformer

AC Input Voltage

110-240VAC, 50/60Hz, 1.4A

DC Output

24V DC 3.75A Constant Voltage

Output Watts Max

90 Watts

Dimensions

(L) 150mm (W) 60mm (H) 33mm

Power Input Cord

1.5m

LED Compatibility

3014 continuous & 5050 RGBW multi colour strip light options

Transformer Capacity Guide 24V-90W Transformer LED Strip lights

Per 90W Transformer (no sensors attached)

3014 Continuous strip light

5.0 meters (including 2m tail leading to transformer)

5050 RGBW Multi colour strip light

5.0 meters (including 2m tail leading to transformer)

Refer to sensor and controller capacity guide, See page > 10.29

10.35

Sinkware & Appliances

Sinkware and Appliances Product guide

Tekform Sinkware Page

Information

11.3

Designer Christchurch Range

11.5

Ergonomic Christchurch Range

11.7

Ergonomic Round Range

11.9

Hand Fabricated Range

11.10

Bowl and Drainer Range

11.12

Designer Butler Range

11.14

Ergonomic Laundry Range

11.15

Lamimount Program

11.17

DriSeal Program

11.17

Accessories

11.19

Premium Entry Level Sinkware Range

11.23

Tekform Tapware Page

11.1

Basin Mixers

11.25

Sink Mixers

11.26

High Rise Sink Mixers

11.27

InAlto Appliances Page

Information

11.31

Upright Cooker

11.32

Cooktops

11.33

Ovens

11.36

Rangehoods

11.37

Dishwashers

11.41

Microwave

11.43

DOMUS Ducting Page

Information

11.44

Wall Outlets

11.45

SuperTube 125

11.46

EasiPipe

11.49

System Parts and Flexible Hoses

11.51

Pipe and Hose Accessories

11.53

Modular Kits

11.56

11.2

Tekform Sinkware

About your Tekform Sinkware Stainless Steel Grade

Stainless steel is very hygienic, and easy to clean, making it ideal for food preparation.

The regular steel grade is 304. Many Tekform sinks are available in the higher 316 marine grade steel.

Seamless Pressed Method

The superior finish of sinkware drawn from one solid plate takes skill and years of understanding the art of stainless steel.

Mercer, the manufacturer of Tekform sinks by Titus delivers this for you from their dedicated sinkware plant in Christchurch. Craftsmen with many combined years of experience produce your sinkware with care.

Radius

This is the measurement of the bowl curves. Tight radius bowls are squarer in shape, for a modern look. However the larger radius bowls are easier to clean and maintain.

Sink Edge

The lip around the bowl, as a TopMount can protect the high wear edge of your benchtop.

Size

Smaller bowls conserve water and bench space and are great for rinsing. Larger bowls will accommodate bigger dishes and trays.

Depth

Shallow bowls are perfect for food preparation and as an effective drainer. They leave plenty of room for underlying cabinetry and a great place to sit a dish-rack.

Waste Location

The waste is often located towards the back of the sink to provide you with maximum storage space in the front of your kitchen cabinet.

Hand Welded Method (WI)

Also available in the range are entry level welded products. Still with the style and functionality you are looking for. Look for weld in Icon

Edge Profile

There are a variety of edge profiles available. Rolled super-safe edges are robust and have no sharp edges, the flat profile chamfered edges on the Tekform pressed top-mount bowls are safe and unobtrusive with a tight fit to the bench surface. Chamfered edges create an easy to wipe with EzyWipe connection from the bench to the bowl

Look out for these icons A quick and easy way for you to understand which sink is right for your needs.

Note: UnderMount + FlushMount templates and CAD files are a guide only, we strongly recommend test cut-outs and check against actual bowls before installation.

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.3

Tekform Sinkware

Manufacture & Supply Partner

The Tekform sinkware by Titus brings to the Australian market a unique range of products sourced and manufactured by Mercer in New Zealand. Mercer head office is in Auckland New Zealand with their modern pressing plant

Mercer brings major point of difference to the Sinkware market in Australia through Tekform by Titus. With a patented LamiMount installation sinkware program and Tapware DriSeal technology, Tekform Sinkware by Titus

Mercer History

The original Mercer Company was established in 1884 by Mr James Mercer in Christchurch, New Zealand. James Mercer laid the foundations for the future with techniques in Copper-smithing, Metalworking and founder’s hammer and forging.

Today, with over 130 years in operation, the modern facility has world standard deepdrawn tight radius pressing equipment, robotic polishing and annealing; which allows Mercer’s long-term skilled employees to craft a range of uniformed deep-drawn stainless steel sinkware. View more on the Mercer Group of companies, by visiting www.mercers.co.nz

Product Disclaimer

As the Mercer policy is one of continual improvement, the manufacturers reserve the right to vary specifications or delete models from their range without prior notification.

Always use the physical product measurements for cutouts as the manufacturer’s template is a guide only and may differ from the actual product dimensions over time. The manufacturers take no responsibility for printing errors.

Product Warranty

Installation Reminder

Need more technical information?

The Tekform by Titus range of stainless steel sinkware products carry a 7-year warranty for domestic application. Commercial application offers a 12-month warranty on stainless steel sinkware. Accessories offer a 12-month warranty.

Tekform sinkware can be installed in a variety of styles including TopMount, FlushMount and UnderMount. It is important to remember that all installations are to be carried out by trained kitchen and cabinet makers familiar with the procedures involved.

Titus Tekform will rectify any genuine manufacturing fault found with any Tekform Sink by Titus during normal use. Please note that this warranty does not cover scratching or normal wear and tear, as these are not manufacturing faults.

Ceramic products in particular are to be fitted by specialist cabinet makers with the skills in fitting this type of sink desig

Log onto titustekform.com.au/products/kitchen-appliances/sinkware for specific product data sheets, care and maintenance information and product warranty details.

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.4

Sinkware

Supplier Information and Warranty

• •

Technical details and dimensions

Medium Bowl

250mm

Item number

290

440

160

604.8B02.023.000

LamiMount SS Collar > See page 11.17

400

440

Capacity (ltr)

•

Made in New Zealand 90mm designer waste (incl.) 304 grade stainless steel @ 1.0mm 20mm low profile EzyWipe flange Unique mounting straps

Depth (mm)

•

Width (mm)

•

Length (mm)

Tekform Sinkware Design Christchurch (DC) Range

604.8X52.020.178

290 mm

160mm deep

1 Pce Preparation Tray

440

400 mm

400

440

LamiMount SS Collar > See page 11.17

604.8B04.023.000 604.8X52.020.180

440 mm

40mm deep

1 Pce 400

Preparation Bowl

440

400

440

100

LamiMount SS Collar > See page 11.17

604.8B06.023.000 604.8X52.020.180

440 mm

100mm deep

1 Pce Main Bowl

440

180

604.8B08.023.000

400 mm

LamiMount SS Collar > See page 11.17 400

440

440 mm

180mm deep

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.5

604.8X52.020.180

Depth (mm)

Capacity (ltr)

Item number

LH Small Bowl 720

440

180/160

16/28

604.8B10.023.010

RH Small Bowl 720

440

180/160

28/16

604.8B10.023.020

Length (mm)

Width (mm)

Sinkware

Tekform Sinkware Design Christchurch (DC) Range

Technical details and dimensions

Main Bowl & Medium Bowl

720

LamiMount SS Collar > See page 11.17

604.8X52.020.182

400

440

400

250

160mm

180mm

deep

1 Pce Double Main Bowls

870 870

440

180

28/28

LamiMount SS Collar > See page 11.17

604.8B12.023.000 604.8X52.020.184

400

440

400

180mm deep

1 Pce Main Bowl & Preparation Bowl

LH Small Bowl 870

440

180/100

16/28

604.8B14.023.010

RH Small Bowl 870

440

100/180

28/16

604.8B14.023.020

LamiMount SS Collar > See page 11.17

870 mm

400

440

400 mm

180mm

604.8X52.020.184

400 mm

100mm deep

deep

1 Pce Accessories for DC Sinkware > See page 11.19

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.6

Tekform Sinkware Ergonomic Christchurch (EC) Range

• • • •

Length (mm)

Width (mm)

Depth (mm)

Capacity (ltr)

•

Item number

260mm 230mm

260

315

150

604.8E16.022.000

335 mm 305 mm

335

170

604.8E18.022.000

Technical details and dimensions

1/2 Bowl

Made in New Zealand 90mm designer waste (incl.) 304 grade stainless steel @ 0.9mm 15mm low profile polished EzyWipe flange Unique mounting straps

315 285 mm

150mm deep

1 Pce 3/4 Bowl

LamiMount SS Collar > See page 11.17

335 305 mm

604.8X52.020.166

170mm deep

1 Pce Medium Bowl

385 mm 355 mm

385

335

170

604.8E02.022.000

440

385

170

604.8E08.022.000

335 305 mm

170mm deep

1 Pce Main Bowl

440 mm 410 mm

LamiMount SS Collar > See page 11.17 385 355 mm

170mm deep

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.7

604.8X52.020.168

Capacity (ltr)

540 mm 510 mm

Depth (mm)

Maxi Bowl

Width (mm)

Technical details and dimensions

Length (mm)

Sinkware

Tekform Sinkware Ergonomic Christchurch (EC) Range

Item number

540

385

180

604.8E20.022.000

LamiMount SS Collar > See page 11.17

604.8X52.020.170

385 355 mm

180mm deep

1 Pce Main Bowl & Medium Bowl Long

775mm

775

385

170

22/17

604.8E22.022.000

770

440

170

22/22

604.8E12.022.000

385 355 mm

410

305

170mm deep

1 Pce Double Main Bowls

770mm

440 mm

LamiMount SS Collar > See page 11.17

410 mm

355

604.8X52.020.174

355

170mm deep

1 Pce Main Bowl & 3/4 Bowl 720mm

440 mm

LH Small Bowl 720

440

170

14/22

604.8E24.022.010

RH Small Bowl 720

440

170

22/14

604.8E24.022.020

410 mm

305 335 mm

355 mm

170mm

1 Pce

deep

LamiMount SS Collar > See page 11.17

604.8X52.020.172

305m m

170mm deep

Accessories for EC Sinkware > See page 11.19

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.8

Tekform Sinkware Ergonomic Round (ER) Range

• • • •

Depth (mm)

Capacity (ltr)

Main Basin

Width (mm)

Technical details and dimensions

Length (mm)

•

Made in New Zealand 40mm plug and waste (incl.) 304 grade stainless steel @ 0.9mm 20mm low profile EzyWipe flange Unique mounting straps

Item number

370

125

604.8G25.022.000

395

145

604.8G26.022.000

370 330 mm

125mm deep

1 Pce Large Basin

395 355 mm

145mm deep

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.9

Tekform Sinkware Hand Fabricated (HF) Range

• • •

Item number

290

440

200

604.8I02.022.000

440

200

604.8I08.022.000

540

440

200

604.8I20.022.000

810

440

200

25/30

604.8I22.022.000

670

440

200

30/11

604.8I33.022.000

440mm

400mm

Capacity (ltr)

290mm 250mm

Depth (mm)

Medium Bowl

Width (mm)

Technical details and dimensions

Length (mm)

Sinkware

•

90mm designer waste (incl.) 304 grade stainless steel @ 1.2mm 20mm polished flange Coated and padded underside

(deep)

200mm

1 Pce Main Bowl

440mm 400mm 440mm

400mm

(deep)

200mm

1 Pce Maxi Bowl

540mm 500mm 440mm

400mm

(deep)

200mm

1 Pce Medium Bowl & Main Bowl

810mm 340mm

400mm 440mm

400mm

(deep)

200mm

1 Pce Main Bowl & 1/2 Bowl 670mm 400mm

200mm 440mm

400mm

(deep)

200mm

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.10

Tekform Sinkware Hand Fabricated (HF) Range

• • •

Depth (mm)

Capacity (ltr)

Item number

LH Drain 1 Tap Hole 1000

510

200

604.8I30.022.010

RH Drain 1 Tap Hole 1000

510

200

604.8I30.022.020

LH Drain 1 Tap Hole 1000

510

200/135

8/25

604.8I35.022.010

RH Drain 1 Tap Hole 1000

510

200/135

25/8

604.8I35.022.020

LH Drain 1 Tap Hole 1200

510

200

25/29

604.8I32.022.010

RH Drain 1 Tap Hole 1200

510

200

29/25

604.8I32.022.020

Length (mm)

Width (mm)

•

Technical details and dimensions

Main Bowl & Drainer

90mm designer waste (incl.) 304 grade stainless steel @ 1.2mm 20mm polished flange Coated and padded underside

1000mm 470mm 510mm

410mm

(deep)

200mm

1 Pce Main Bowl & 1/2 Bowl + Drainer

340mm

1000mm 170mm

410mm

510mm 410mm

400mm (deep)

200mm

1 Pce

135mm (deep)

Main Bowl & Medium Bowl + Drainer

400mm

1200mm 340mm

370mm 510mm

400mm

(deep)

200mm

1 Pce Accessories for HF Sinkware > See page 11.19

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.11

Tekform Sinkware Bowl and Drainer (BD) Range

• •

Depth (mm)

Capacity (ltr)

Item number

LH Drain 1 Tap Hole 780

480

170

604.8K08.022.110

RH Drain 1 Tap Hole 780

480

170

604.8K08.022.120

No Tap Hole 780

480

170

604.8K08.022.000

LH Drain 1 Tap Hole 1080

480

170/150

12/20

604.8K24.022.110

RH Drain 1 Tap Hole 1080

480

170/150

20/12

604.8K24.022.120

No Tap Hole 1080

480

170/150

20/12

604.8K24.022.000

Technical details and dimensions

Main Bowl + Fan Drainer

Length (mm)

Width (mm)

Sinkware

•

90mm designer waste (incl.) 304 grade stainless steel @ 0.8mm Coated and padded underside

780mm 330mm

380mm 480mm 170mm deep

1 Pce Main Bowl & 3/4 Bowl + Fan Drainer

1080mm 330mm

278mm

278mm 380mm

480mm

170mm deep main bowl 150mm deep small bowl

1 Pce Accessories for HF Sinkware > See page 11.19

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.12

Depth (mm)

Capacity (ltr)

Item number

LH Drain 1 Tap Hole 1180

480

170

20/20

604.8K36.022.110

RH Drain 1 Tap Hole 1180

480

170

20/20

604.8K36.022.120

No Tap Hole 1180

480

170

20/20

604.8K36.022.000

1 Tap Hole 1380

480

170

20/20

604.8K46.022.000

No Tap Hole 1380

480

170

20/20

604.8K46.022.100

1 Tap Hole 820

500

180

24/24

604.8K12.022.100

No Tap Hole 820

500

180

24/24

604.8K12.022.000

Length (mm)

Width (mm)

Tekform Sinkware Bowl and Drainer (BD) Range

Technical details and dimensions

Double Bowls + Fan Drainer

1180mm 330mm

480mm 380mm

330mm

1 Pce

170mm deep bowls

Double Bowls + Double Fan Drainers

1380mm 330mm

380mm

480mm

330mm

1 Pce

170mm deep main bowls

Double Bowls

820mm 355mm

500mm 406mm

355mm

1 Pce

180mm deep bowls

Accessories for BD Sinkware > See page11.19

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.13

Tekform Sinkware Designer Butler (DB) Range

• • •

Depth (mm)

Capacity (ltr)

Ceramic Single Bowl

Width (mm)

Technical details and dimensions

Length (mm)

Sinkware

•

90mm designer waste (incl.) Single bowl includes overflow High glaze solid core ceramics Deep bowl design

Item number

595

475

225

604.8L02.102.000

•

• •

•

475mm

Ceramic bowls are not designed for a waste disposal Product tapers inward by 12mm from top to bottom on front and sides Ceramic products to be fitted by specialist All tap holes need to be cut by specialist. Tap holes are not included Overflow not included

595mm

225mm (deep)

1 Pce Ceramic Double Bowl

800 •

•

• •

800mm 490mm

•

490

220

28/28

604.8L02.122.000

220mm (deep)

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.14

Tekform Sinkware Ergonomic Laundry (EL) Range

• • •

Depth (mm)

Capacity (ltr)

Item number

1.2mm SS Bowl Only 500

500

250

604.8N38.022.000

W/ Side Wall Kit Included 500

500

250

604.8N38.022.001

0.8mm SS Bowl Only 560

460

230

604.8N40.022.000

W/ Side Wall Kit Included 560

460

230

604.8N40.022.001

Technical details and dimensions

Square Bowl 500mm 450mm

Length (mm)

Width (mm)

•

Seamless pressed bowls 304 grade stainless steel Sidewall by-pass kit Large bowl kitchen, galley and alfresco applications

500 450 mm

250mm deep

1 Pce Large Bowl 560mm 520mm

LamiMount SS Collar > See page 11.17

460 420 mm

604.8X52.020.176

230mm deep

1 Pce Large Mega Bowl

1.2mm SS Bowl Only 660

510

300

604.8N42.022.000

W/ Side Wall Kit Included 660

510

300

604.8N42.022.001

660mm

510

460

610 mm

300mm deep

1 Pce

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.15

Depth (mm)

Capacity (ltr)

Item number

No Tap Hole 390

500

200

604.8N43.022.000

Dual 40mm Inlets with 390 ByPass Kit Included

500

200

604.8N43.022.011

1 Tap Hole w/ Side Wall Kit Included 390 (RH Tap Hole, Short Side)

500

200

604.8N43.022.013

1 Tap Hole w/ Side Wall Kit Included 390 (RH Tap Hole, Long Side)

500

200

604.8N43.022.012

No Tap Hole 600

500

230

604.6N44.022.000

Dual 40mm Inlets with 600 ByPass Kit Included

500

230

604.8N44.022.001

1 Tap Hole w/ Side Wall Kit Included 600 (RH Tap Hole, Short Side)

500

230

604.8N44.022.012

1 Tap Hole w/ Side Wall Kit Included 600 (RH Tap Hole, Long Side)

500

230

604.8N44.022.011

Technical details and dimensions

Laundry Tub

Length (mm)

Width (mm)

Sinkware

Tekform Sinkware Ergonomic Laundry (EL) Range

390mm 310mm

500 420 mm

200mm deep

1 Pce Laundry Tub

600mm 520mm

500 420 mm

230mm deep

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.16

Tekform Sinkware LamiMount (LM) Program • • • •

New sinkware fitting application Integrate your sinkware into laminate benchtops Low profile finish Simply wipe from bench into bowl

Internal Dimensions*

Collar Thickness

Collar Width

604.8X52.020.166 604.8E18.022.000

305mm x 305mm

1.2mm

40mm

604.8X52.020.168 604.8E08.022.000

410mm x 355mm

1.2mm

40mm

604.8X52.020.170 604.8E20.022.000

510mm x 355mm

1.2mm

40mm

690mm x 410/305mm 1.2mm

40mm

604.8X52.020.174 604.8E12.022.000

740mm x 410mm

1.2mm

40mm

604.8X52.020.176 604.8N38.022.000

520mm x 420mm

1.2mm

40mm

604.8X52.020.178 604.8B02.023.000

250mm x 400mm

1.2mm

40mm

604.8B04.023.000, 604.8X52.020.180 604.8B06.023.000, 604.8B08.023.000

400mm x 400mm

1.2mm

40mm

604.8X52.020.182 604.8B10.023.020

680mm x 400mm

1.2mm

40mm

604.8B12.023.000, 604.8B14.023.000

830mm x 400mm

1.2mm

40mm

LamiMount (LM)

604.8X52.020.172

604.8X52.020.184

Matching Bowl

604.8E24.022.020 604.8E24.022.010

* Internal guide only – no radius

DriSeal (DS) Program • • • •

To use with all sinkware without tap landings Protects benchtops from water damage Creates a barrier to spills and leaks Decorative and functional design

DriSeal product images and ordering information can be found under Sink Accessories (SA) > See page 11.21 Download supporting documentation from the Titus Tekform website titustekform.com.au

11.17

Tekform Sinkware Accessories

Customise

Using foodboards, colanders and See pages 11.19-11.22 other fitted accessories with your to mix and match accessories sinkware makes food preparation with your preferred sink simple. .Once all the food prep and dishes are done, getting back to your clean benchtop surface couldnâ&#x20AC;&#x2122;t be easier.

Drainer Trays

Drainer trays give you the option of placing the drainer where it is convenient.Create benchspace and drain wet dishes effortlessly with a drainer tray. They can be positioned to the left or right, and even fitted over the sink.

Food Preparation

Food boards are perfect for creating more benchspace in smaller kitchens. Fit the cutting board over the sink to create a food preparation space.

Washing up

Tekform Sink accessories offer flexibility to your space. Add a dishracks suitable to your preferred sinks and cleaning up is easy.

Sinkware

Information

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.18

Tekform Sinkware Sink Accessories (SA) Customise your sink with accessories. Each of the following accessories is designed to be used with one or more of the sinks in the following ranges: • • •

DC EC HF

• •

BD EL

Tekform Sinkware Accessories by Titus offer you: • • • •

Convenience Organisation Flexibility Safety

Item number

Food Board Main (EC Main Bowls)

604.8X62.018.000

1 Pce Food Board NZ Matai (DC & HF Medium Bowls)

604.8X54.143.000

1 Pce Food Board (BD Main Bowls)

604.8X54.270.000

1 Pce Food Board (604.8K12.022.100)

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.19

604.8X54.275.000

Sinkware

Tekform Sinkware Sink Accessories (SA)

Item number

Prep Colander Tray SS (DC & HF Main Bowls)

604.8X56.056.000

1 Pce Colander 1/2 Bowl (DC & HF Medium Bowls)

604.8X58.301.000

1 Pce DrainerTray S/S (604.8K12.022.100)

604.8X60.034.000

1 Pce DrainerTray (EC Main Bowls)

604.8X60.032.000

1 Pce DrainerTray SS (DC & HF Main Bowls)

604.8X60.130.000

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.20

DC EC HF

• •

BD EL

Tekform Sinkware Accessories by Titus offer you: • • • •

Convenience Organisation Flexibility Safety

Item number

Dish Rack S/S (EC & BD Main Bowls)

604.8X62.024.000

1 Pce Dish Rack Chrome Plated (DC & HF Main Bowls)

604.8X62.016.000

1 Pce DriSeal Round

604.8X64.090.001

1 Pce DriSeal Square

604.8X64.090.002

1 Pce 35mm Chrome Tap Hole Cap

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.21

604.8X64.120.000

Tekform Sinkware Sink Accessories (SA) •

Hide washing machine hoses No unsightly hoses over the benchtop

Sinkware

•

Item number

By-Pass Plumbing Kit (EL)

604.8X72.300.000 •

•

Plumbing kit for Ergonomic Laundry sink range Includes by-pass kit

1 Pce

By-Pass Sidewall Kit (EL)

604.8X70.100.000 •

• •

Clean solution through the sidewall of the cabinet Flexible hose extends up to 800mm Fits into tight areas where rigid pipes cannot be used

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.22

Main Bowl + Drainer

Capacity (ltr)

•

0.8mm thick 304 grade stainless steel Left or right handed drainer options Rolled edge

Depth (mm)

•

Width (mm)

•

Length (mm)

Tekform Sinkware Premium Entry Level (PEL) Range

Item number

780

480

170

604.8V30.022.000

•

380mm

480mm

Supplied with: • • •

330mm

170mm (deep)

1 x 90mm designer waste 1 x tap hole Clips Seal tape

780mm

1 Pce Main Bowl & 1/2 Bowl + Drainer 980mm

980

300mm

380mm

480mm

• • •

330mm

170/ 140

20/8

604.8V28.022.000

Supplied with: •

170mm (main bowl depth) 140mm (small bowl depth)

480

2 x 90mm designer wastes 1 x tap hole Clips Seal tape

200mm

1 Pce Main Bowl & 3/4 Bowl + Drainer

1080

480

1080mm

170/ 145

20/12

604.8V34.022.000

•

278mm

380mm

480mm

Supplied with: • •

170mm (main bowl depth) 145mm (smallbowl depth)

•

330mm

2 x 90mm designer wastes 1 x tap hole Clips Seal tape

278mm

1 Pce Double Main Bowls + Drainer 1180mm

1180

380mm

480mm

• • •

330mm

20/20

2 x 90mm designer wastes 1 x tap hole Clips Seal tape

330mm

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.23

170

Supplied with: •

170mm (main bowl depths)

480

604.8V36.022.000

Width (mm)

Depth (mm)

Capacity (ltr)

Double Main Bowls + Double Drainer

Length (mm)

Sinkware

Tekform Sinkware Premium Entry Level (PEL) Range

Item number

1380

480

170

20/20

604.8V46.022.000

380mm

480mm

•

Rolled edge

Supplied with: • •

170mm (main bowl depths)

330mm

330mm 1380mm

• •

2 x 90mm designer wastes 1 x tap hole Clips Seal tape

1 Pce Centered Main Bowl + Double Drainer

1180

330mm

480mm

•

480

170

604.8V48.022.000

Rolled edge

Supplied with: • •

170mm (depth )

380mm 1180mm

• •

1 x 90mm designer waste 1 x tap hole Clips Seal tape

1 Pce Laundry Tub

630

380mm

470mm

•

220

604.8V44.022.001

Laser edge

Supplied with: • •

220mm (deep)

470

•

540mm

•

630mm

•

1 Pce Round Bowl

1 x 90mm designer waste 2 x bypass holes 1 x bypass kit Clips Seal tape Ø450

•

380 450 mm

604.8V50.022.000

Laser edge

Supplied with: • •

180mm

180

•

1 x 90mm designer waste Clips Seal tape

deep

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.24

Tekform Tapware Basin Mixers • •

40mm Ceramic Cartridge 5 Star Wels Rating

Technical details and dimensions

Handle

Square Basin Mixer

Item number

Solid

604.8F08.001

Solid

604.8F08.005

42x42

1 Set

110

195

110

Made of brass with chrome

Basin Mixer

117

115

ø50

1 Set

Made of brass with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.25

Tekform Tapware Sink Mixers •

40mm Ceramic Cartridge 5 Star Wels Rating

Tapware

•

Technical details and dimensions

Handle

Single Lever Single Mixer

Item number

Solid

604.8F07.050

Solid

604.8F07.055

220

130

139

10°

ø50

1 Set

Made of brass with chrome

Pull-out Single Lever Sink Mixer

115

162

195

ø50

1 Set

Made of brass with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.26

Tekform Tapware High Rise Sink Mixers • •

35mm Ceramic Cartridge 5 Star Wels Rating

Technical details and dimensions

Handle

High Rise Goose Neck Sink Mixer

Item number

604.8F07.015

604.8F07.020

185

50x50

1 Set

110

260

335

Made of brass with chrome

High Rise Square Neck Mixer 200

50 x 50

1 Set

110

250

335

ø20

Made of brass with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.27

Tekform Tapware High Rise Sink Mixers â&#x20AC;˘

Tapware

â&#x20AC;˘

35mm Ceramic Cartridge Goose Neck / 40mm Ceramic Cartridge Square 5 Star Wels Rating

Technical details and dimensions

Handle

High Rise Goose Neck Pull-out Sink Mixer

Pull-out Pin

604.8F07.025

Lever

604.8F07.030

299

481

198

Item number

Max 30

M33*1.5-6H

1 Set

Made of brass with chrome

High Rise Square Sink Mixer 180

Max 25

1 Set

256

277

136

Made of brass with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.28

Tekform Tapware High Rise Sink Mixer â&#x20AC;˘ â&#x20AC;˘

40mm Ceramic Cartridge 5 Star Wels Rating

Technical details and dimensions

Handle

High Rise Multi-function Sink Mixer

156

681

Pull-out Pin

205

1 Set

Made of brass with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.29

Item number

604.8F07.010

Appliances & Ducting

InAlto Appliances from Titus Tekform

The InAlto Brand The InAlto brand was created by Residentia through a singular desire: to establish a premium-level range of kitchen appliances able to deliver a superior cooking experience to Australian consumers.

The Titus Tekform offer was designed to eliminate shortcomings with todayâ&#x20AC;&#x2122;s major brands whilst drawing on todayâ&#x20AC;&#x2122;s European design trends

Quality assurance for your InAlto Appliances from Titus Tekform

The Residentia team are committed to ensuring all products meet and exceed all required standards and approvals and have engaged the services of independent experts both locally and internationally to ensure this is the case.

All manufacturing partners are regularly audited and pre-shipment inspections will also take place. Residentia employs the services of QA inspectors to perform inspections on products throughout the manufacturing process.

Claims and Returns

All InAlto appliances purchased from Titus Tekform carry a 24 month supplier warranty.

Stock of all required spare parts to suit the InAlto appliances is available to ensure the service technician can fix any issue promptly.

In the rare event the Titus Tekform customer team is unable to solve a customer issue due to a product failure or fault, we will arrange for one of our Residentia (InAlto Supplier) service technicians to visit the customer.

For more information on the Titus Tekform Quality and Claims policies, visit www.titustekform.com.au/warrantyand-services

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.31

Premium quality stand alone cooktop and oven Superb balance of technology, performance and safety 5 Italian made Defendi burners with cast iron trivets that allow for precision gas control

• •

Depth (mm)

Height (mm)

Dual Upright Cooker with 5 burners

Width (mm)

•

Item number

896

598

558-935

604.8B05.075.000

•

• • • • • • • • •

1 Pce

900mm 7 multi-function oven (twin fan) with LED 5 burner hob with cast iron trivets & FFD 110ltr capacity Twin fan for quick pre-heat Electronic under-knob ignition Cavity cooling system LED programmable timer Thermostatically controlled grill Adjustable feet Supplied with 15 Amp plug

Made of 304 grade stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.32

Appliances & Sinkware

InAlto Kitchen Appliances Upright Cooker

InAlto Kitchen Appliances Cooktops • •

•

Depth (mm)

Thickness (mm)

Cut-out dimensions (mm)

Electric Ceramic Cooktop

Width (mm)

•

Item number

590

520

560 x 485

604.8B05.010.000

• • • • •

1 Pce

600mm electric ceramic cooktop Frameless glass design 4 cooking zones with radiant heating elements Knob control Residual heat indicator lights

Made of ceramic 900

Electric Ceramic Cooktop

• • • • •

1 Pce

Superior functionality wrapped in striking design Extendable dual zones to cater for a wide variety of cookware shapes and sizes Easy to use touch controls Programmable timer with auto shut off feature

520

604.8B05.015.000

900mm electric ceramic cooktop 5 cooking zones including 1 extended zone Touch control Frameless glass design with bevelled edges Child lock function

Made of ceramic

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.33

870 x 485

•

Depth (mm)

Thickness (mm)

Cut-out dimensions (mm)

Electric Ceramic Cooktop

Width (mm)

•

Item number

590

520

560 x 485

604.8B05.020.000

• • • • •

1 Pce

580 • • • • • • • •

510

58.8

560 x 490

604.8B05.025.000

600mm electric induction ceramic cooktop 4 induction cooking zones 2 extendable zones Touch control Timer function for each zone Frameless glass design with bevelled edges Child lock function Total height including min. ventilation required 105 - 125mm

Made of ceramic 600

Gas Cooktop

• • • •

1 Pce

600mm electric ceramic cooktop 4 cooking zones with radiant heating elements Touch control Frameless glass design with bevelled edges Child lock function

Made of ceramic

Electric Ceramic Induction Cooktop - Touch Control

1 Pce

Induction cooktops deliver superior functionality wrapped in striking design Gas cooktops offer a superb balance of technology, performance and safety Easy to use touch controls Programmable timer with auto shut off feature

510

560 x 480

604.8B05.030.000

600mm gas cooktop 4 burner gas cooktop with enamel trivets Electronic under-knob ignition Metal control knob

Made of 304 grade stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.34

Appliances & Sinkware

InAlto Kitchen Appliances Cooktops

InAlto Kitchen Appliances Cooktops •

Depth (mm)

Thickness (mm)

Cut-out dimensions (mm)

Gas Cooktop with Wok Burner

Width (mm)

•

Item number

580

500

560 x 480

604.8B05.035.000

• • • • •

1 Pce

700 • • • • •

510

604.8B05.040.000

700mm gas cooktop 5 burner with wok Cast iron trivets & FFD Electronic under-knob ignition Metal control knobs

860 • • • • •

510

830 x 480

900mm gas cooktop 5 burner with wok Cast iron trivets & FFD Electronic under-knob ignition Metal control knobs

Made of 304 grade stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.35

560 x 480

Made of 304 grade stainless steel

Gas Cooktop with Wok Burner

1 Pce

600mm gas cooktop 4 burner with wok and cast iron trivets Electronic under-knob ignition Metal control knob Flame failure safety device

Made of 304 grade stainless steel

Gas Cooktop with Wok Burner

1 Pce

Gas cooktops offers a superb balance of technology, performance and safety Italian made Defendi burners that allow for precision gas control

604.8B05.045.000

InAlto Kitchen Appliances Ovens • •

Width (mm)

Depth (mm)

Thickness (mm)

Cut-out dimensions (mm)

•

Item number

595

575

600 x 600

604.8B05.080.000

With LED Display 595

575

600 x 600

604.8B05.085.000

Electric Oven - 5 Functions

• • • •

• •

085.000

1 Pce

595 • • • •

• • • •

575

600 x 600

604.8B05.090.000

600mm multi-function oven 9 functions 65ltr capacity Touch control programmable LED clock/timer Cavity cooling system Telescopic runners Triple glaze cool touch door Child safe oven activation process

Made of stainless steel and black optical glass

Electric Oven - 9 Functions with LED Display

895 • • • •

• • •

1 Pce

600mm fan-forced oven 5 functions 65ltr capacity 120 minute manual timer (080.000) / Fully programmable LED timer (085.000) Double glaze cool touch door Cavity cooling system

Made of stainless steel and black optical glass

Electric Oven - 9 Functions with LED Display

1 Pce

Sleek presentation ‘Child safe’ cool touch glass Heavy duty chrome side racks Impressive capacity

Appliances & Sinkware

•

547

860 x 472

604.8B05.095.000

900mm multi-function oven 9 functions 82ltr capacity Touch control programmable LED clock/timer Cavity cooling Triple glaze cool touch door Child safe oven activation process

Made of stainless steel and black optical glass

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.36

InAlto Kitchen Appliances Rangehoods •

Canopy Rangehood

Height (mm)

•

World-class performance Profound reliability and durability Undermount, slide-out and canopy options Width options from 520 – 900mm

Depth (mm)

•

Width (mm)

•

Item number

600

500

638-1018

604.8B05.100.000

• • • • •

1 Pce

Made of stainless steel 900

Canopy Rangehood

• • • • •

1 Pce

600mm canopy rangehood 750m³/hr extraction 2 LED lights 3 speed settings 2 baffle grease filters

500

638-1018

604.8B05.105.000

900mm canopy rangehood 750m³/hr extraction 2 LED lights 3 speed settings 2 baffle grease filters

Made of stainless steel 900

Slimline Canopy Rangehood

• • • • •

500

548-1028

604.8B05.110.000

900mm slimline canopy rangehood 750m³/hr motor 2 LED lights 3 speed settings 3 aluminium grease ﬁlters Optional Flu extension and replacement carbon filters available > see page 11.40

1 Pce

Made of stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.37

InAlto Kitchen Appliances Rangehoods

Curved Glass Canopy Rangehood

Item number

900

500

570-1050

604.8B05.115.000

• • • • •

1 Pce

900mm curved glass canopy rangehood 3 speed settings 2 aluminium grease filters 750m³/hr motor 2 LED Lights

Made of stainless steel and glass 900

Flat Glass Canopy Rangehood

• • • • •

1 Pce

Appliances & Sinkware

•

Height (mm)

•

World-class performance Profound reliability and durability Undermount, slide-out and canopy options Width options from 520 – 900mm

Depth (mm)

•

Width (mm)

•

500

554-1034

604.8B05.120.000

900mm flat glass canopy rangehood 3 speed settings 2 aluminium grease filters 750m³/hr motor 2 LED Lights

Made of stainless steel and glass 600

Slide-out Rangehood

•

• • • •

280

176

604.8B05.125.000

600mm twin motor vented or recirculating slideout rangehood 3 speed settings 2 aluminium grease filters 2 LED lights Slide controls Optional Flu extension and replacement carbon filters available > see page 11.40

1 Pce

Made of stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.38

InAlto Kitchen Appliances Rangehoods •

Undermount Rangehood

Height (mm)

•

World-class performance Profound reliability and durability Undermount, slide-out and canopy options Width options from 520 – 900mm

Depth (mm)

•

Width (mm)

•

Item number

520

296

254

604.8B05.130.000

• • • • •

1 Pce

Made of stainless steel 750

Undermount Rangehood

• • • • •

1 Pce

254

604.8B05.135.000

750mm undermount rangehood Twin LED lights 750m³/hr extraction 3 speed settings 1 aluminium grease filter

900 • • • • •

296

254

604.8B05.140.000

900mm undermount rangehood Twin LED lights 750m³/hr extraction 3 speed settings 1 aluminium grease filter

Made of stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.39

296

Made of stainless steel

Undermount Rangehood

1 Pce

520mm undermount rangehood Twin LED lights 750m³/hr extraction 3 speed settings 1 aluminium grease filter

InAlto Kitchen Appliances Rangehood Accessories •

Ensure your exhaust is ducted properly with a flu extension Use extension with InAlto Canopy Rangehoods

Appliances & Sinkware

•

Item number

604.8B05.300.000

Rangehood Flu Extensions, 1200mm

•

For use with > Canopy rangehoods 604.8B05.100

604.8B05.305.000 •

For use with > Canopy rangehood 604.8B05.110

604.8B05.310.000 •

1 Pce

Made of stainless steel

For use with > Canopy rangehood 604.8B05.115

Item number

604.8B05.320.000

Rangehood Carbon Filter

•

1 Set

Designed to replace dirty carbon filters in your InAlto Rangehoods

Made of plastic and carbon mesh

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.40

InAlto Kitchen Appliances Dishwashers Thoughtfully designed to offer convenience, efﬁciency and reliability Built to handle the less enjoyable aspect of home cooking – the cleaning up Mark-free stainless steel with LED display

•

Depth (mm)

Height (mm)

Dishwasher, 12 Place Settings

Width (mm)

•

Item number

600

850-875

604.8B05.050.000

• • • • • • • • • • •

1 Pce

600mm electronic dishwasher 5 functions LED display with push button controls Removable cutlery basket Delay start Anti-flood device Height adjustable upper baskets Collapsible plate racks Stainless steel micro filter 4 star WELS rating 3 star Energy rating

Made of mark-free stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.41

Thoughtfully designed to offer convenience, efﬁciency and reliability Built to handle the less enjoyable aspect of home cooking – the cleaning up Mark-free stainless steel with LED display

•

Depth (mm)

Height (mm)

Dishwasher, 6 Place Settings

Width (mm)

•

Item number

448

600

845

604.8B05.060.000

• • • • • • • • • • •

1 Pce

Made of mark-free stainless steel

Integrated Dishwasher, 14 Place Settings

598 • • • • • • • • •

• • •

1 Pce

450mm freestanding electronic dishwasher 6 functions 6 place settings Cutlery drawer Height adjustable upper basket Collapsible plate racks Delay start LED display with push button controls Stainless steel micro filter 3 star WELS rating 3 star Energy rating

550

815-865

604.8B05.065.000

600mm fully integrated electronic dishwasher Fully integrated installation 6 functions 14 place settings Cutlery drawer High adjustable upper basket Collapsible plate racks Delay start LED display with push button controls on upper door panel Stainless steel micro filter 4 star WELS rating 3 star Energy rating

Made of mark-free stainless steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.42

Appliances & Sinkware

InAlto Kitchen Appliances Dishwashers

InAlto Kitchen Appliances Microwave •

Built-in Microwave with Convection Oven

Height (mm)

•

Black microwave to complement the kitchen appliances 25ltr capacity 10 cooking functions Child lock function

Depth (mm)

•

Width (mm)

•

Item number

594

465

388

604.8B05.070.000

• • • • • • • •

Microwave and convection oven 25ltr capacity Built-in design 900w microwave power 1100w grill power 2400w convection power Pre-set auto menu with 10 pre-set food types Child lock function

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.43

DOMUS Ducting

Ducting

Ducting and Ventilation Product Range Supertube 125

Supertube 125 is ideal for the ducting of all rangehoods and powerful fans. The airflow efficiency of Supertube 125 is maintained even on long ducting runs and can be used with appliances of high extraction rates.

EasiPipe

EasiPipe round ducting is available in two diameters: 125 and 150mm. EasiPipe is a multi-application system and is ideal for larger fans, rangehoods, whole-house ventilation systems, stack ventilation and air conditioning.

A round pipe system represents the most efficient air flow conduit as less air turbulence occurs.

Hoses & Accessories

Flexible hoses provide a solution to overcome situations where a rigid component cannot be installed. Manufactured in PVC self-extinguishing material or polyester coated aluminium for extra strength. Hoses are mainly for use with tumble dryers or when there is slow moving air. Round and rectangular hoses are available in sizes which are compatible with all our six ranges in various standard lengths.

A selection of accessories including hose connectors, clips and tape provide effective connections from flexible to rigid ducting.

DOMUS Ducting manufacture a comprehensive range of wall outlets, which are fully compatible with all DOMUS system configurations. A choice of three round spigots to fit all EasiPipe sizes and rectangular sockets for use with Supertube 125 are available.

Wall outlets are manufactured in White UV stabilised colour finishes. There are various types of outlets for use in different situations

A range of standard boxed kits is available providing a one-stop solution to many popular installation requirements.

However, should these kits not provide the necessary products, special kits can be designed to meet the exact specification of the installation. All are packed in purpose made cartons.

Wall Outlets

Kits 5904

D215W H 114-5

126-5

5611

DOMUS has a large range of round and rectangular PVC flexible hoses in various lengths that are compatible with System, Supertube 125, MegaDuct 220, EasiPipe and ThermaPipe. Hose provides solutions to overcome situations where a rigid component cannot be installed.

126-5

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.44

• •

UV stabilised plastic Protection from vermin and pests Includes draft dampers

Outer Width x Height (mm)

•

Outer Diameter (mm)

Ducting Wall Outlets and Ventilators

Item number

125

200 x 200

604.8C06.590.000

150

200 x 200

604.8C06.690.000

125

200 x 200

604.8C06.594.000

150

200 x 200

604.8C06.694.150

201 x 57

604.8C06.501.000

Wall Outlet with Gravity Flaps

1 Pce Louvred Grill with Flyscreen

1 Pce Brick Size Wall Outlet •

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.45

Brick sized wall outlet for use with 515 flat channel

Ducting SuperTube 125 Flat Modular Ducting

•

Creates efficient air flow Ideal for use with larger fans and rangehoods

Inner Width x Height (mm)

204 x 60

Length (mm)

Flat Channel

Outer Width x Height (mm)

Outer Diameter (mm)

Ducting

•

Item number

1500

604.8C04.515.000

1 Pce Flat Channel Clip

204 x 60

604.8C04.122.000

1 Pce Flat Channel Connector

Without damper

204 x 60

604.8C04.520.000

With damper

204 x 60

604.8C04.527.000

125

204 x 60

604.8C04.540.000

150

204 x 60

604.8C04.640.000

1 Pce Elbow Bend

1 Pce Vertical 90° Bend

204 x 60

604.8C04.560.000

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.46

Inner Width x Height (mm)

Adapter

Outer Diameter (mm)

Ducting SuperTube 125 Flat Modular Ducting

Item number

125

204 x 60

604.8C04.570.000

129

129 x 100

604.8C02.544.000

145

125 x 100

604.8C02.644.000

204 x 60

604.8C04.550.000

204 x 60

604.8C04.582.000

1 Pce Adapter to Converter

1 Pce Adapter with Offset Centres

1 Pce Horizontal 90Â° Bend

1 Pce Horizontal T Piece

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.47

262 x 118

205 x 61

•

Ducting

Adjustable to and from

Inner Width x Height (mm)

Rectangle Wall Plate

Outer Width x Height (mm)

Ducting SuperTube 125 Flat Modular Ducting

Item number

604.8C06.115.000

Rectangular Wall Plate 115 for use with brick size wall outlet.

1 Pce Adjustable Horizontal Bend

201 x 57

204 x 60

3.75° - 48.75°

604.8C04.545.000

1 Pce Flat Channel End Cap

604.8C04.518.000

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.48

• • •

Available in both 125mm and 150mm diameter Very efficient with low turbulence Flexible usage with multiple applications

Right Angle Bend

Outer Diameter (mm)

Ducting EasiPipe Round Modular Ducting

Item number

125

604.8C02.590.000

150

604.8C02.690.000

125

604.8C02.593.000

150

604.8C02.693.000

125

604.8C02.594.000

150

604.8C02.694.000

1 Pce Straight Pipe Connector

1 Pce Straight Pipe Connector with Damper Valve

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.49

Inner Diameter (mm)

Ducting

Ducting EasiPipe Round Modular Ducting

DektiteÂŽ Flashing on Lead

Item number

Dekltite original 75-160

604.8C02.104.000

Deklite Tile on lead 75-160

604.8C02.114.000

1 Pce Roof Cowl

125

604.8C02.505.000

150

604.8C02.507.000

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.50

Straight Pipe Connector with Damper Valve and Wall Plate

Length (mm)

Inner Diameter (mm)

Outer Diameter (mm)

Ducting System Parts and Flexible Hose

Item number

125

604.8C02.595.000

125

604.8C02.596.150

150

604.8C02.696.150

1 Pce Pipe Fastener

1 Pce EasiPipe

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.51

125

400

604.8C02.534.000

125

1200

604.8C02.530.000

150

1000

604.8C02.110.000

Ducting System Parts and Flexible Hose

• •

Length (mm)

Item number

122 x 64

3000

604.8C04.533.000

127

1000

604.8C02.561.000

127

3000

604.8C02.905.000

150

3000

604.8C02.906.000

Inner Diameter (mm)

Inner Width x Height (mm)

Ducting

•

For usage where rigid piping can not be installed Suitable for slow air movement Ideal for clothes dryer installations

Rectangle PVC Coated Flexible Hose

1 Pce Round PVC Coated Flexible Hose

1 Pce Round Nude Aluminium Hose

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.52

Circular Reducer and Adapter

Adapter 125 Reducer

125

Inner Diameter (mm)

Outer Diameter (mm)

Ducting Pipe and Hose Accessories

Item number

150

604.8C02.118.000

100

604.8C02.119.000

These products can be fitted together to form either a 125 to 100mm adapter or a 125-150mm reducer.

1 Pce Threaded Hose Connector with Spigot

100

604.8C02.124.000

1 Pce Threaded Hose Connector with Socket

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.53

125

604.8C02.125.150

150

604.8C02.126.000

Cable Tie

Length (m)

Inner Diameter (mm)

Ducting

Ducting Pipe and Hose Accessories

150

Item number

604.8C02.125.000

1 Pce PVC Duct Sealing Tape

4.6

604.8C02.123.000

604.8C02.698.000

1 Pce Gasket

1 Roll Download supporting documentation from the Titus Tekform website titustekform.com.au

11.54

Air Extract or Supply Valve to Fit Pipe

Outer Width x Height (mm)

Outer Diameter (mm)

Ducting Pipe and Hose Accessories

Item number

125

604.8C02.136.000

150

604.8C02.136.600

1 Pce Round Wall Plate

1 Pce Download supporting documentation from the Titus Tekform website titustekform.com.au

11.55

125

154 x 154

604.8C02.145.000

150

205 x 205

604.8C02.146.000

Ducting Modular Ducting Kits â&#x20AC;˘

Complete solutions for popular installations Available as boxed kits

Ducting

â&#x20AC;˘

Item number

Supertube 125 Ducting Kit for 125mm Diameter

604.8C08.225.000

1 Kit Supertube 125 Ducting Kit for 150mm Diameter

604.8C08.226.000

1 Kit

D215W H Flexible Hose Ducting Kit for Rear Ducting 125mm Diameter 5904

114-5

126-5

604.8C08.215.000

5611

126-5

1 Kit Download supporting documentation from the Titus Tekform website titustekform.com.au

11.56

Doors, Panels & Surfaces

Doors, Panels & Surfaces Product guide

DuraformÂŽ Vinyl Wrapped Doors Page

Series One - Contemporary Soft Corners

12.2

Series Two - Sharp Lines

12.3

Series Three - Square Corners and Defined Lines

12.4

Series Four - Classical Country

12.5

Series Five - Raised Designs

12.6

Options and Accessories

12.7

Ordering Information

12.11

AlifrostÂŽ Aluminium Doors Page

Product Overview and Application

12.12

Frame Options

12.13

Ali Handle

12.15

Insert Options

12.16

Extras and Accessories

12.18

Ordering information

12.18

Belle Roller Doors Page

Product Overview and Specifications

12.19

Ordering Information

12.20

Stefano Orlati Solid Surfaces Page

Acrylic Benchtops Overview, Specifications and Ordering Information Metalaminates and HMR Particle Board Product Overview and Ordering Information

12.1

12.21 12.22

Doors, Panels & Sufaces

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series One Contemporary soft, plain faced designer, which will enhance a modern kitchen

Avoca

Bass

Buffalo

Gordon

Gordon 12

Hastings

Jamieson

Kiewa

King

Omeo

12.2

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Two Soft round corners & sharp lines for simplicity and functionality in design.

Barwon

12.3

Canning

Daly

Emu

Fitzroy

Franklin

Hunter

Huon

Tambo

Doors, Panels & Sufaces

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Three Square corner routes in most styles and straight defined lines.

Bemm

Catherine

Darling

Derwent

Esk

Goulburn

Jardine

Lachlan

Tarwin

Tusmore

Murray

Swan

12.4

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Four Classical country styling with contemporary modern lines. V-grooved panels to flat panelled designs.

Acheron

Hay

Loddon

12.5

Dargo

Edward

Howqua

LaTrobe

Thompson

Thompson 3

Thompson 5

Doors, Panels & Sufaces

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Five Detailed design. Raised, 3 dimensional bolection moulds, complimented by v-grooved or flat panel plaques.

Aire

Hopkins

Hume Lachlan

Hume Murray

Plenty

Ross

Yarra

Yarra BL

12.6

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Options & Accessories Fold Backs and Wrap Around Panels Option End panels are vinyl wrapped and returned without joins. Ideal for refrigerator panels, pantry panels, island end panels and decorative pieces for furniture.

18 or 35mm Fold Back Available in 100, 200, 300, 400 and 500mm returns. Restricted by sheet size

600 18 100

12.7

Doors, Panels & Sufaces

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Options & Accessories There is a wide range of options available including: decorative flutes, circular flutes, wine racks, roller shutter frames, open shelves, capping mould and a range of one to eight pane colonial frames.

Column

Flute with singular rose

Flute

Rose

Flute with two roses

Decorative trim

12.8

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Options & Accessories Wine Rack Tubes Available in black, white and stainless steel Overall dimension of tube is 310mm front to back with a 90mm diameter hole.

Cap Moulds Available in two sizes

Cap Mould

Cap Mould 65

Frames Frames are available up to 10 panes depending on door size

Colonial Four Pane

12.9

Colonial Six Pane

Colonial Eight Pane

Single frame

Doors, Panels & Sufaces

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Door Variations

All Duraform doors come standard as square. However, all door profiles are also available with the following variations:

Shoulder Arch

Round Arch

Arch

Double Arch

Double Bow Arch

Bow Arch

Recess Rails 70 x 25mm Recess rail dimensions: 70 x 25mm Available in two profiles, Type C and Type L

Type C

Type L

12.10

Doors & Panels Duraform® Vinyl Wrapped Doors

Ordering tools and resources Visit titustekform.com.au • • •

Download the Janper Vinyl Door order forms Download the Janper Door & Panel Brochure Visit your local Titus Tekform branch to view samples and displays

OFFICE USE ONLY Job N°.

……………....………………………………...

Invoice N°. Terms:

……...………..…………………………...

COD

Account

Page N° 1 / 2

Customer: Address:

Order N°: Date Ordered: Date Required: Job No:

Contact: Phone: Fax:

Alterations and cancellations must be made within 4 hours of the order being placed. Any alterations and cancellations after this time could incur a charge. All alterations must be in writing quoting the order number.

Door Type:

Edge Detail:

Arched or Square:

6mm Pencil Round

(6mm Pencil Round Standard on Series 2 - 3) Line No

Qty

Height (mm)

Width (mm)

Ogee

X for square edge T

Door Colour:

Stepped Pencil Round

2mm Pencil Round

Description

Square

Customer Use

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Syd 29 30

CAPPING MOULD - 2.4m LENGTHS x 38mm HIGH Sydney Unit 1&2, 41-43 Whyalla Place, Prestons, NSW, 2170 02 9826 0007 02 9826 0074 (Fax) Tasmania 88 Hopkins St, Moonah, Tas 7009 6273 1199 Fax (03) 6273 0050

South Australia Phone (03) 8 8447 3700 8 8447 3183 (Fax) Postal: PO Box 357, Bayswater, VIC, 3153

Brisbane 1/32 Northlink Place, Virginia, QLD, 4014 07 3266 3999 07 3266 5234 (Fax) Postal: PO Box 266, Northgate, QLD, 4013

12.11

Newcastle Unit 3, 100 Munibung Road, Cardiff, NSW, 2285 02 4954 4011 02 4954 4233 (Fax)

Townsville 20 Civil Road, Garbutt, QLD, 4814 07 4779 1366 07 4779 1316 (Fax) Postal: PO Box 7922, Garbutt, QLD, 4815

Melbourne 8/59 Jersey Road, Bayswater, VIC, 3153 3 9737 5566 3 9729 8780 (Fax) Postal: PO Box 357, Bayswater, VIC, 3153 Wodonga 2/20 Mint Street, Wodonga, VIC, 3690 2 6056 3188 2 6056 3190 (Fax) Northern Territory 1/32 Northlink Place, Virginia, QLD, 4014 07 3266 3999 07 3266 5234 (Fax) Postal: PO Box 266, Northgate, QLD, 4013

Doors, Panels & Sufaces

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Product Overview • • • • • • • •

Alifrost® is a range of aluminium framed Perspex®, 3D gloss acrylic, glass & AliMesh® doors & panels. Alifrost® offers a modern look with an exclusive range of European designed frames combined with the latest decorative insert options. 10 year guarantee applicable on all genuine Perspex® inserts. Easy maintenance – when supplied with a Perspex® Frost insert, Alifrost® doors have a unique “anti-fingermark” finish reducing the need for cleaning. When inserted with Perspex® & 3D acrylic gloss Acrylic, Alifrost® doors are ultra hygienic making them ideal for food preparation areas. Alifrost® doors offer superior impact resistance over glass when used with Perspex® inserts. Alifrost® doors with Perspex® are lightweight (half that of glass doors), making them easier to use & less stress on hardware components particularly for larger doors. Environmentally friendly – the two main components of Alifrost® doors, aluminium & Perspex® are fully recyclable.

Product Applications • Kitchens/bathroom doors, drawers & lift up panels • Vanity Mirror Cabinet doors – meets Australian Safety standards • Alfresco Kitchens - Perspex® is guaranteed for 10 years for exterior applications • Entertainment Units • Speaker Covers - Alimesh® inserts only • Wardrobes • Caravans • Room dividers

12.12

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Frame options

19 Square

• • • • • •

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Integrated handle option available Recommended for hinge & bi-fold doors, sliding and lift flap doors Powder coat colours also available

43 x 55 Flat

• • • • •

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Integrated handle option available Recommended for hinged doors, lift flap and lift up doors, drawers and sliding doors.

43 x 55 - Euro Stainless

• • • • •

Superior Euro Stainless (ES) finish to match the latest Euro appliances Hollow construction for rigidity Suitable for all insert types Recommended for hinged doors, lift flap and lift up doors, drawers and sliding doors.

9 x 55 Box

• • • • •

•

12.13

Doors, Panels & Sufaces

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Frame options

45 x 45 Flat

• • • • •

45 x 45 Flat (BS) - Brushed Stainless

6 x 45 Box - Clear Anodised

• • • •

Superior brushed stainless (BS) finish Hollow construction for rigidity Suitable for all insert types Recommended for hinged doors, lift flap and lift up doors, drawers and sliding doors

• • • •

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Highly recommended for use with glass as a vanity mirror Powder coat colours available

•

6 x 45 Box (PS) - Polished Silver

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Recommended for hinged doors, lift flap and lift up doors, drawers and sliding doors Powder coat colours now available

• • • •

New polished silver finish with anti scratch ribbed back Hollow construction for rigidity Suitable for all insert types Highly recommended for use with glass as a vanity mirror

12.14

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Frame options 55 Slimline

• • • • • •

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for non-translucent (NT) inserts only Integrated handle option available Highly recommended for use with 3D acrylic gloss inserts Powder coat colours available

• • • • •

Superior clear anodised finish New integrated, flush fitted handle option Suitable for 19 Square, 43 x 55 Flat CA, 9 x 55 Box & 55 Slimline 50,100 & 150mm length options

AliHandle™

12.15

Doors, Panels & Sufaces

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Insert options

Perspex® Ultra High Gloss

• • • • • • • • • •

01 Black 962 02 Café Latte 5263 03 Clear 000 04 Opal 010 -70% LT 05 Opal 030 – 70% LT 06 Opal 069 – 9% LT 07 Scarlet Rose 4262 08 Shadow Grey 9563 09 Vanilla 9638 10 Green 6T81

Perspex® Frost – anti fingermark finish

• • • • • • • • • • •

11 Crystal Clear S2 000 12 Charcoal Grey S2 9T23 13 Glacier Green S2 6T21 14 Earth Brown S2 5T33 15 Polar White S2 030 16 Moonlight White S2 1T41 17 Midnight Black S2 9221 18 Desert Beige S2 5268 19 Walnut Brown S2 5269 20 Ash Grey S2 9642 21 Mineral Grey S2 9643

Perspex® Pearlescent – metallic lustre

• •

22 Pearl 1PY1 23 Platinum 9PY2

Eurmir® - decorative acrylic mirror

•

24 Grey 40

12.16

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Frame Options

Glass

• • •

25 Clear Glass (toughened) 26 Frosted Glass (toughened) 27 Glass Safety Mirror

Alimesh® - one way vision aluminium mesh

• • • •

28 Clear anodised 00001 29 Black 19268 30 White 81880 31 White Birch 37131

Alum Composite

• • •

32 New Brushed Silver AC32 33 New Metallic Charcoal BC44W 34 New Metallic Sliver BC25

Perspex® Impressions Linear – textured

• • • • •

35 Clear P1 000 36 Opal P1 030 37 Grey P1 9T1D 38 Black P1 9221 39 Brown P1 5T23

= translucent

12.17

LT= Light Transmission Level

Alifrost® Extras 1. Printed patterns available on request (minimum quantities apply). 2. Custom colours and powder coated frames available on request (minimum quantities apply). 3. Multiple inserts with Alirail® - a cross rail for multiple inserts & added rigidity. Suitable for 19 Square, 9 x 55 Box & 43 x 55 Flat frames. Recommended for doors & panels larger than 1.92sqm

2. Ordering Alifrost® Doors Visit titustekform.com.au • Download the Alifrost® door order form • Download the latest Alifrost® brochure • Visit your local Titus Tekform branch to view samples & displays:

12.18

Doors, Panels & Sufaces

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Doors & Panels Belle Roller Doors

Product Overview •

Belle roller doors are ideal for all storage requirements

•

The door glides open & unlike hinged or bi-fold doors, the entire space in front of the door can be used

•

Ideal for concealing kitchen appliances when not in use with the closed door providing an elegant, streamline look

•

Available in laminate, vinyl, timber & MDF

•

Doors can be manufactured in any size up to 2 metres x 2 metres

•

Doors can be fitted with locks, providing extra security in commercial & home office applications

•

A remote controlled electric motor can be fitted

Product Specifications

Side View

Note: 1) Dimension C equals 100mm when the door is fully opened 2) Add 50mm to DIMENSION A for making installation easier

12.19

HEIGHT

To 600

190

110

601-900

200

130

901-1200

210

140

1201-1500

215

155

1501-1800

220

170

1801-2100

225

180

Doors, Panels & Sufaces

Doors & Panels Belle Roller Doors

Product Specifications

Isometric View

Plan View

Odering Belle Roller Doors Visit titustekform.com.au Download the Belle Roller Door order forms BELLE ROLLER DOOR ORDER FORM COMPANY NAME

DATE ORDERED BY

ORDER NUMBER

DEL. BRANCH

INTERNAL CARCASE MEASUREMENTS QTY

HEIGHT

WIDTH

WORDS

NOTE: IF WORDS ARE NOT PRINTED, TEKFORM WILL NOT ACCEPT RESPONSIBILITY FOR THE MISREADING OF ILLEGIBLE DIGITS

MATERIAL DESCRIPTION MDF

LAMINATE

TIMBER

COLOUR

BRAND

TYPE

FINISH

VINYL

OTHER DISPLAY DOOR

MESSAGE - SHOWROOM ADDRESS

SUPPLIED MATERIAL

DELIVERY ADDRESS

STATE

POSTCODE

Titus Tekform Pty Ltd Sydney

Unit 1&2, 41-43 Whyalla Place, Prestons, NSW, 2170 PH: 02 9826 0007 FAX: 02 9826 0074

Newcastle

Unit 3, 100 Munibung Road, Cardiff, NSW, 2285 PH: 02 4954 4011 FAX: 02 4954 4233

Melbourne

8/59 Jersey Road, Bayswater, 3153 PH: 03 9737 5566 FAX: 03 9729 8780

Wodonga

2/20 Mint Street, Wodonga, VIC, 3690 PH: 02 6056 3188 FAX: 02 6056 3190

PO Box 357, Bayswater, VIC, 3153 PH: 08 8447 3700 FAX: 08 8447 3183

Tasmania

88 Hopkins Street, Moonah, TAS, 7009 PH:03 6273 1199 FAX: 03 6273 0050

Brisbane

1/32 Northlink Place, Virginia, QLD, 4014 PH: 07 3266 3999 FAX: 07 3266 5234

Townsville

20 Civil Road, Garbutt, QLD, 4814 PH: 07 4779 1366 FAX: 4779 1316

12.20

Doors & Panels Stefano Orlati Acrylic Benchtops & Panels

Product Overview • • • • • •

MTM benchtop program or sheet option available Ideal durable product for residential & commercial applications Offers design flexibility with hygienic features Non- porous – resistant to staining, mildew & bacteria Repairable & renewable surface Inconspicuous joins

Applications include: • Commercial & Residential Benchtops • Vanities • Reception areas • Bar Tops • Shelves • Furniture • Wall panelling • Shower & Bath surrounds • Transactional Counters • Food service areas • Medical Sector applications

Product Specifications • • • • • • • • • •

100% acrylic composition Thermoformable Non- porous Resistant to staining, mildew, pollutants, bacteria & other harmful agents Repairable & renewable surface UV Stability Custom design NSF-51 certified for food preparation areas Easy maintenance Truly homogenous “solid” material with colour the thickness of the sheet material

Ordering Stefano Orlati Acrylic Benchtops Visit titustekform.com.au Download Brochure and Order Forms

Visit your local Titus Tekform branch to view samples and displays.

12.21

Doors, Panels & Sufaces

Doors & Panels Stefano Orlati Metalaminates & HMR Particleboard

Product Overview • A durable, non staining, non -marking material that is ideal for kickers & feature panels • Available in two colours: Brushed Aluminium & Brushed Stainless Steel • Premounted large sheets & smaller width rips on HMR particleboard available for ease of installation & use in moisture prone areas such as kitchens & bathrooms

Product ordering information Item number Brushed Aluminium Metalaminate 3600 x 1200 x 0.8mm

602.8M36.120.048

Brushed Stainless Metalaminate 3600 x 1200 x 0.8mm

602.8M36.120.058

Brushed Aluminium HMR Particle Board Sheet 3600 x 1200 x 18mm

602.8M36.120.148

Brushed Stainless HMR Particle Board Sheet 3600 x 1200 x 18mm

602.8M36.120.158

Brushed Aluminium HMR Particle Board Rip 3600 x 120 x 18mm

602.8M36.012.048

Brushed Aluminium HMR Particle Board Rip 3600 x 150 x 18mm

602.8M36.015.048

12.22

Titus Tekform Company Profile

Titus Tekform Strategy

Vision

Mission

To be the supplier of choice to

To provide customers with

the Australasian kitchen

solutions that improve their

Titus Business Philosophies and Principles

manufacturing, cabinet making

competitiveness

· Gain total knowledge of our

and shop-fitting industries

customers and their markets · Meet our customers’ expectations with global consistency · Build long term associations with customers, suppliers, colleagues and shareholders · Invest in the abilities of individuals at every level · Continuously enhance input

Die casting

c Te

nt s

efficiency and sustainability

Connectors

Drawers

Pr e

cis

io n

Assembly systems

Dampers

gi e olo

Co m

Tooling

Damped components

Damped hinges

Titusonic FastFit

Furniture Hardware

Furniture Hardware · Cabinet connectors · Concealed hinges · Soft closing systems · Drawers and drawer systems · Kitchen accessories · Furniture locks · Decorative

5.3

Components

· Dampers · Precision components

Technologies

· Automation systems · Precision castings · Die cast technologies · Tooling · Ultrasound fastening technology · FastFit technology

â&#x20AC;&#x2DC;Totally Integrated Engineeringâ&#x20AC;&#x2122;

Product Design Design and engineering of unique components

Consistent and repeatable

Manufacturing Technologies

Manufacturing Operations

to improve productivity and product quality

A wide array of technologies and services required for high volume production of precision components available in-house

Fast time-to-market

Unique product advantages

product quality

5.4

Quality Management

Quality

Fit for Purpose

Continuous Improvement

We believe that the Titus Mission is achieved most effectively through the management of our design, manufacturing and service activities in conformance with the ISO 9001 standard for quality management. Quality has a broad meaning for us: it is our guide to the selection of materials, work, processes, internal relations and cooperation with partners.

is our guiding principle.

The Titus Group Mission, to improve the competitiveness of our customers, encourages us to continuously improve our products, services, processes and competencies of our employees.

Quality Management System

Support & Operation

Customer requirements

Feedback

Plan Organization and its context

Planning

Needs and experctations of interested parties

Results of the QMS

Performance evaluation

Check

Input

We invest in the abilities of individuals at every level

5.5

Leadership

Act

Products and services

Output Improvement

Our policy is to ensure our activities continuously enhance input efficiency and sustainability

Customer satisfaction

At our main location in Dekani we operate within the guidelines of ISO 14001 and ISO 50001.

Worldwide design, manufacturing and local distribution capabilities

Titus Tool Company Ltd. Titus International Ltd. Titus Tool Company Inc.

TitusPlus Italia S.r.l.

Titus Polska Sp. z.o.o..

TitusPlus Iberia SLU

Titus Furniture Fitting Trading (Shenzhen) Ltd.

CRO-Lama Titus d.o.o. Dekani TitusPlus d.o.o. Lama Avtomatizacija d.o.o..

Titus Tool Company Pte. PT Titus Tekform Indonesia

Titus Tekform

Victoria Titus Tekform Pty Ltd 8/59 Jersey Road Bayswater, VIC, 3153 T: +61 3 9737 5566 Fax: +61 3 9729 8780 Titus Tekform Pty Ltd 2/20 Mint Street Wodonga, VIC, 3690 T: +61 2 6056 3188 Fax: +61 2 6056 3190

New South Wales

Queensland

Titus Tekform Pty Ltd Unit 1&2, 41-43 Whyalla Place Prestons, NSW, 2170 T: +61 2 9826 0007 Fax: +61 2 9826 0074

Titus Tekform Pty Ltd 76 Northlink Place Virginia, QLD, 4014 T: +61 7 3266 3999 Fax: +61 7 3266 5234

Titus Tekform Pty Ltd Unit 3, 100 Munibung Road Cardiff, NSW, 2285 T: +61 2 4954 4011 Fax: +61 2 4354 4233

Titus Tekform Pty Ltd 20 Civil Road Garbutt, QLD, 4814 T: +61 7 4779 1366 Fax: +61 7 4779 1316

NZ Hardware

South Australia Titus Tekform Pty Ltd PO Box 357, Bayswater, VIC, 3153 T: +61 8 8447 3700 Fax: +61 8 8447 3183

Tasmania Titus Tekform Pty Ltd 88 Hopkins Street Moonah, TAS, 7009 T: +61 3 6273 1199 Fax: +61 3 6273 0050

www.titustekform.com.au info@titustekform.com.a

5.6