Power House Products

Page 1

www.powerhouseproducts.com

1.800.872.7223

PERFORMANCE TOOL CATALOG


TOOLS YOU NEED! General Information Our hours of operation are 8 a.m. to 5 p.m. CST Monday through Friday. Powerhouse® Products is closed Saturday, Sunday and all legal holidays. All orders for in stock merchandise will be shipped the same day they are received.

Powerhouse® Products 3402 Democrat Road Memphis, TN 38118 Toll-Free 1-800-872-7223 Local 901-795-7600 Fax 901-375-3430 www.powerhouseproducts.com

Ordering Information

Shipping Information We offer all levels of UPS and FedEx shipping. All orders will be shipped via FedEx Ground Service unless otherwise specified at time of order. Consult the map below to determine approximate shipping transit times (exclude weekends and holidays). Same Day, Next Day, 2 Day, 3 Day and Saturday delivery services are also available. All C.O.D. orders will have associated C.O.D collection fees added to the shipping charges. We recommend payment by credit card to avoid C.O.D. charges and simplify delivery. Overseas, APO and FPO orders must be paid in advance (including shipping charges), and will be shipped via the most economical method unless otherwise requested.

Approximate FedEx Transit Days

Phone

Call our sales department at1-800-872-7223. If you have technical questions, please ask for a tech sales person. Specify any special shipping instructions at time of order.

Online Visit the Powerhouse® Products website to shop and order from our complete product line:

www.powerhouseproducts.com We accept the following forms of payment:

Damaged Merchandise All shipments are fully insured. Any claim for damage must be made to the freight carriers. Do not return damaged merchandise to Powerhouse® Products unless requested to do so. Please contact us if you need assistance.

Note: All credit cards are subject to a security check. C.O.D. shipments will be sent cashier check or money order only unless previous written authorization has been obtained.

(There is a $200.00 limit on C.O.D. orders)

Pricing Information We strive to maintain catalog pricing; however, prices are subject to change without notice. You should always verify prices when ordering.

Merchandise Returns If for any reason you are dissatisfied with any purchase you have made from us, you have 90 days from shipment date to return the item for a full refund. You must call our office for prior approval and receive an Authorization Number before returning any merchandise. All returns must be shipped prepaid and insured. Refunds will be made only if product is new and in saleable condition (open or missing packaging is acceptable). See our product warranty section regarding returns of defective merchandise.

This catalog has been compiled to the best of our ability. We assume no liability for errors contained herein. It is the responsibility of the user / installer to ensure that the components are correct before installation. Powerhouse® Products reserves the right to make necessary changes in products it manufactures and markets at any time to meet demand or improve product performance. Except as noted, products in this catalog are not legal for sale or use on pollution-controlled motor vehicles. All manufacturers’ names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any product listed is the product of these manufacturers or approved by any of these manufacturers. Any reproduction or use of this catalog in whole, or in part, is strictly forbidden without written permission from Powerhouse® Products.

2

800-872-7223

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE

P R O D U C T Adjustable Valve Spring Remover . 21 Air/Fuel Meter . . . . . . . . . . . . . . . . . 4 Angle Finders . . . . . . . . . . . . . . . . . 26 Apron . . . . . . . . . . . . . . . . . . . . . . . 27 Arbors. . . . . . . . . . . . . . . . . . . . . . . 17 A/N Fitting Wrenches . . . . . . . . . . 16 A/N Adjustable Wrenches . . . . . . . . 5 Balance Shop Kits . . . . . . . . . . . . . 19 Block & Head Handles . . . . . . . . . . 18 Bolt Hole Elongating Tool . . . . . . . 25 Books, Videos & Software . . . 29 - 31 Bore Gauges . . . . . . . . . . . . . . . . . 13 Burets . . . . . . . . . . . . . . . . . . . . . . . 16 Burrs . . . . . . . . . . . . . . . . . . . . . . . . 23 Cam Bearing Installation Kit . . . . . 10 Cable Ties . . . . . . . . . . . . . . . . . . . . 5 Cam Checking Tools & Fixtures . . . . 9 Cam Gear Lock (DOHC engines) . . 11 Cam Installation Handles . . . . . . . . . 9 Carburetor Jets . . . . . . . . . . . 32 & 33 Cartridge Rolls . . . . . . . . . . . . . . . . 22 CCing Kits & Tools . . . . . . . . . . . . . 16 Checking Springs . . . . . . . . . . . . . . 10 Compression Tester . . . . . . . . . . . . 27 Connecting Rod Vise . . . . . . . . . . . 19 Convolute Wheel . . . . . . . . . . . . . . 23 Crank Gear Installation Tool. . . . . . . 9 Crank Journal Micrometers . . . . . . 15 Crank Sockets. . . . . . . . . . . . . . . . . . 9 Crankshaft Stroke Checker. . . . . . . 19 Crankshaft Turning Nuts. . . . . . . . . . 8 Cross Buffs . . . . . . . . . . . . . . . . . . . 22 Cubic Inch Testers . . . . . . . . . . . . . . 6 Deck Bridges . . . . . . . . . . . . . . . . . 15 Degree Wheels & Kits . . . . . . . . . . . 8 Dial Bore Gauges . . . . . . . . . . . . . . 13 Dial Calipers . . . . . . . . . . . . . . . . . . 13 Dial Indicators & Accessories 13 & 14 Die Grinders . . . . . . . . . . . . . . . . . . 22 Digital Calipers . . . . . . . . . . . . 4 & 12 Digital Scales . . . . . . . . . . . . . . . . . 19 Drive Shaft Angle Gauges . . . . . . . 16 Electric Ring Filer . . . . . . . . . . . . . . 24 Engine Cleaning Kit . . . . . . . . . . . . 26 Engine Coatings & Lube . . . . 27 & 28 Engine Rotation Tool . . . . . . . . . . . 10 Engine Stands . . . . . . . . . . . . . . . . 22 Fiberscopes . . . . . . . . . . . . . . . . . . 24 Flex Lights . . . . . . . . . . . . . . . . . . . . 6

800-872-7223

I N D E X

Float Adjusting Tools . . . . . . . . . . . 25 Flow Bench Valve Opening Fixture 18 Freeze Plug Drivers . . . . . . . . . . . . . 7 Gauges . . . . . . . . 4, 12-13, 16-17, 19 Gator Brand™ Hose Clamps . . . . . . 34 Gloves & Sleeves . . . . . . . . . . . . . . 27 Granite Comparator Stand. . . . . . . 15 Harley Head Plate . . . . . . . . . . . . . 15 Harmonic Balancer Installer . . . . . . 11 Harmonic Balancer Puller. . . . . . . . 11 Head CC Kits . . . . . . . . . . . . . . . . . 16 Head Holders . . . . . . . . . . . . . . . . . 23 Height Mics . . . . . . . . . . . . . . . . . . 10 Hook and Pick Set . . . . . . . . . . . . . 13 Infrared Temperature Guns . . . . . . . 6 Jet Storage Boxes . . . . . . . . . . . . . 33 Jewelers Eye Loupe . . . . . . . . . . . . 24 Layout Dye . . . . . . . . . . . . . . . . . . . 28 Leakdown Tester . . . . . . . . . . . . . . 26 Legal. . . . . . . . . . . . . . . . . . . . . . . . . 2 Lifter Bore Grooving Tools . . . . . . . 16 Lifter Organizer/Protector Box . . . . 17 Lifter Valley Standpipes . . . . . . . . . 10 Lockbuster . . . . . . . . . . . . . . . . . . . 17 Louis Tool . . . . . . . . . . . . . . . . . . . . 18 Lubricants . . . . . . . . . . . . . . . 27 & 28 Mandrels . . . . . . . . . . . . . . . . . . . . 23 MaxJet™ Fuel Systems . . . . . . 32 & 33 Micrometer Standards . . . . . . . . . . 14 Micrometer Stands . . . . . . . . . . . . . 15 Micrometers . . . . . . . . . . . . . 14 & 15 Motor Handles . . . . . . . . . . . . . . . . 15 New Products . . . . . . . . . . . . . . 4 & 5 Oil Filter Cutter . . . . . . . . . . . . . . . 18 Oil Pump Primers . . . . . . . . . . . . . . 11 Oil Restrictors. . . . . . . . . . . . . . . . . 10 Pinion Angle Gauge. . . . . . . . . . . . 16 Pinion Depth Setting Tool . . . . . . . 15 Pipe Plug Socket . . . . . . . . . . . . . . 18 Piston Dome CCing Tool . . . . . . . . 16 Piston Dome Thickness Checker . . 15 Piston Knocker (Pro) . . . . . . . . . . . . . 7 Piston Ring Expander Pliers . . . . . . . 6 Piston Ring Squaring Tool . . . . . . . . 7 Piston Vise . . . . . . . . . . . . . . . . . . . 15 Porting Kits. . . . . . . . . . . . . . . . . . . 22 Power Valve Tools . . . . . . . . . . . . . 25 Pro Valve Lapping Tool . . . . . . . . . 12 Pushrod Assembly Tools . . . . . . . . 17

Pushrod Length Checker . . . . . . . . 10 Pushrod Slot Louis Tool . . . . . . . . . 18 Remote Starter Switch . . . . . . . . . . 25 Rethreader Die Set. . . . . . . . . . . . . 20 Rimac Spring Testers . . . . . . . . . . . 21 Ring Compressors . . . . . . . . . . . . . . 7 Ring Expanding Pliers . . . . . . . . . . . 6 Ring Filers. . . . . . . . . . . . . . . . . . . . . 6 Ring Groove Cleaner . . . . . . . . . . . 10 Ring Squaring Tools . . . . . . . . . . . . . 7 Rocker Stud Puller & Tap Guide . . 18 Rod Balancers and Fixtures . . . . . . 19 Rod Bolt Stretch Gauge . . . . . 5 & 11 Rod Guide Tool . . . . . . . . . . . . . . . 12 Scales. . . . . . . . . . . . . . . . . . . 18 & 19 Seat Guide Cutters. . . . . . . . . . . . . 17 Shipping Information . . . . . . . . . . . . 2 Shock Dyno . . . . . . . . . . . . . . . . . . 25 Software . . . . . . . . . . . . . . . . . . . . . 31 Spark Plug Viewer . . . . . . . . . . . . . 24 Spark Plug Tools . . . . . . . . . . 18 & 26 Spring Seat Cutters . . . . . . . . . . . . 17 Spring Testers. . . . . . . . . . . . . . . . . 21 Straight Edges . . . . . . . . . . . . . . . . . 8 Stud Boss Cutters. . . . . . . . . . . . . . 18 Stud Puller & Tap Guide . . . . . . . . 18 Stud/Remover Installer. . . . . . . . . . 17 Tapered Ring Compressors . . . . . . . 7 T-Shirts . . . . . . . . . . . . . . . . . . . . . . 27 TDC Stops . . . . . . . . . . . . . . . . . . . . 8 Technical Resources . . . . . . . . . . . . 35 Telescoping Gauges. . . . . . . . . . . . 12 Thermal Barrier Coatings . . . . . . . . 27 Thread Restorer Taps . . . . . . . . . . . 23 Timing Lights. . . . . . . . . . . . . . . 4 & 6 Torque Wrenches . . . . . . . . . . . . . . 20 Transmission Tailshaft Plug. . . . . . . 25 Twist Flexlight. . . . . . . . . . . . . . . . . . 6 Valve Guide Cutters . . . . . . . . . . . . 17 Valve Lash Wrenches . . . . . . . . . . . 25 Valve Lapping Tool. . . . . . . . . . . . . 12 Valve Lock Remover/Installer . . . . . 12 Valve Seal Installer. . . . . . . . . . 5 & 12 Valve Seat Runout Gauges. . . . . . . 12 Valve Spring Compressors . . 20 & 21 Valve Tools . . . . . . . . . . . . . . . . . . . 25 Valve Train Organizers . . . . . . . . . . 20 Videos, Books & Software . . . 29 - 31 Warp & Alignment Gauge . . . . . . . 11

w w w. p o w e r h o u s e p r o d u c t s . c o m

3


TOOLS YOU NEED!

N E W

P R O D U C T S

Deluxe Air Pressure Gauges

Intercomp’s Deluxe Air Gauges incorporate a patented internal mechanism which provides far more resilience to extreme punishment. While other gauges have 14 or more moving parts, Intercomp’s Deluxe Air Gauges have only four! Fewer moving parts mean greater reliability. Available in glow in the dark, and every unit includes a high-quality, thumb-operated bleeder and swivel nozzle on a 17” Goodyear hose. High visibility with major and minor graduation marks. POW301390 POW301391 POW301392 POW301393 POW301394 POW301395

2", 0-15 x 1/2 PSI 2", 0-30 x 1 PSI 2.5", Glow In The Dark, 0-15 x 1/2 PSI 2.5", Glow In The Dark, 0-30 x 1 PSI 3.5", Glow In The Dark, 0-15 x 1/2 PSI 3.5", Glow In The Dark, 0-30 x 1 PSI

$29.95 $29.95 $39.95 $39.95 $49.95 $49.95

Advance Master Timing Light

When accurate timing is a matter of life or death for your race engine, the Powerhouse® Advance Master Timing Light is the right choice. In serious racing applications, such as Nextel Cup, a 1/2-degree in ignition timing can mean the difference between engine failure and winning the race. And in drag racing engines, improper timing can lead to sluggish reaction times and harmful engine detonation. That’s why Powerhouse® Products has developed the Advance Master Timing Light which produces precision timing accuracy within a 1/2-degree. This precision unit incorporates a cutting-edge laser pointer instead of old antiquated timing light technology and a precision “repeating strobe” light that mounts directly to your engine block. In addition, the Advance Master features a large face digital pad which allows the driver to read the timing while sitting in the car, or it can be mounted under the hood for quick checks. Includes all installation hardware. POW301520 Advance Master Timing Light

Call for Pricing

FAST™ Air/Fuel Meter

The FAST™ Air/fuel Meter uses a sensor in both of your engine’s exhaust outlets (not just one sensor like competitive air/fuel meters) to get the full story on the state of your engines tune. With the FAST™ Air/Fuel Meter, you can read both exhaust sensors individually or average them together for super accurate readings of the engine’s true air/fuel ratio. For those on a budget, a single sensor version is available that can later be upgraded to the two-sensor technology. Easy to use, the FAST™ Air/Fuel Meter includes a simple, built-in data-logger that doesn’t require you to download to a laptop. Advanced features include outputs for external data-loggers and digital gauges, as well as a narrow-band simulator function that allows you to feed your engine’s computer a factory signal while using the wide-band sensor for air/fuel measurement. Includes sensors and installation hardware. POW102201 POW102202

FAST™ Air/Fuel Meter (single sensor) FAST™ Air/Fuel Meter (two sensor)

$349.95 $459.95

6” Digital Calipers

The secret to engine performance and durability is precision assembly. With Powerhouse® Products new 6" Digital Calipers you are assured of getting the correct measurements the first time, so that parts are properly machined to fit and deliver exacting performance. Featuring a large, high-contrast LCD display powered by an SR44 battery, the Powerhouse® Products 6" Digital Calipers are the perfect part for both professional and enthusiast engine builders. Accurate to 0.0008" for measurements under 4" and to .00012" for lengths up to 6", they are capable of delivering both inside and outside measurement. In addition, the Powerhouse® 6-Inch Digital Calipers are built to withstand the rigors of repeated use and demanding environments for years of accurate measurements. POW256400 6" Digital Calipers

4

800-872-7223

$49.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Stainless Steel Cable Ties

Available in 10-packs and lengths of 7.9", 14.3", 20.5", 26.8" and 33" these stainless steel cable ties resist fire, corrosion, vibration, weathering, radiation and extreme temperatures. Made from 100 percent Grade 304 stainless steel, they look great and with smooth rounded edges, won’t tear up your vehicle or your hands. Powerhouse® Products’ new Stainless Steel Cable Ties go where plastic and nylon fear to tread. POW110100 POW110110 POW110120 POW110130 POW110140

7.9" Stainless Steel Cable Ties (10-pack) 14.3" Stainless Steel Cable Ties (10-pack) 20.5" Stainless Steel Cable Ties (10-pack) 26.8" Stainless Steel Cable Ties (10-pack) 33" Stainless Steel Cable Ties (10-pack)

$10.60 $11.93 Call for Pricing Call for Pricing Call for Pricing

A/N Adjustable Crescent Wrenches

Face it. You already have too many wrenches. That drawer full of A/N wrenches may be handy for some shop projects, but for the professional mechanic with on-site needs, a handful of wrenches is more than you need. Ready to deliver is Powerhouse® Products with a pair of adjustable crescent wrenches that fit any A/N fitting from #3 through #20. Best of all, these crescent wrenches are made in America from top quality aluminum and fit in your pocket for those last minute starting line checks or when having your roll-away tool box by your side just isn’t possible. The unique adjustability of the Powerhouse® A/N Crescent Wrench makes it the perfect tool for the pro or enthusiast mechanic. Reasonably priced, one wrench handles A/N fittings from #3 through #8. A second wrench covers A/N fittings from #10 through #20. POW302000 #3 - #8 POW302001 #10 - #20

$44.95 $64.95

Seal Setter™

Teflon valve seals install easily and reliably every time with the Seal Setter™, a simple, but effective, two-part tool comprised of a bullet-nose sleeve and a hand piece. The bullet-nose sleeve features a .010" wall, which gently expands the seal and protects it from damage as it passes over the valve-stem end and the lock groove.The coaxial fit of the Seal Setter™ sleeve and hand piece ensure that seals seat properly every time. It’s quality construction will provide you with a lifetime of use - that’s why we guarantee its durability. POW101010 POW101011 POW101012 POW101013

11/32" Seal Setter™ 3/8" Seal Setter™ 5/16" Seal Setter™ 8mm Seal Setter™

$59.95 $59.95 $59.95 $59.95

Rod Bolt Stretch Gauge The Powerhouse® Rod Bolt Stretch gauge features a dial indicator marked in 0.001-inch increments. This low-cost, one piece gauge is easy-to-use and works for bolts up to 2.75inch. The Rod Bolt Stretch Gauge can be used before engine assembly on your work bench to check rod bolt condition or in the engine as it goes together and features an innovative high tension spring which allows you to read bolt stretch as it happens. POW101301 Rod Bolt Stretch Gauge

800-872-7223

$62.50

w w w. p o w e r h o u s e p r o d u c t s . c o m

5


TOOLS YOU NEED! Cubic Inch Tester

Laser Sighted Infrared Temperature Gun

Just point this bad boy at anything (tires, track surface, radiator, cylinder heads, your dog, etc.), and it will tell you its surface temperature. Our standard Infrared Temperature Gun runs on a 9 volt battery and has a range of 0 to 750°F (-18 to 400°C). The easy-to-read LCD display even has a backlight feature, so it works equally well in darkness or bright sunshine. Just point and pull the trigger, no need to focus or calibrate. Includes plastic case. POW301300

0-750° F Infrared Laser Temperature Gun

$159.95

Note: Our testers are designed and calibrated to read 1% less than actual cubic inches. A 350 c.i. engine will pump 347 cubic inches with our tester. Must Be Shipped By Air.

Flex Lights Our line of bendable Flex Lights provides a convenient way to inspect nooks, crannies and holes in just about anything. The tiny 3/16" high intensity bulb goes where ordinary lights won’t fit. The best feature of these versatile inspection tools is their bendable shafts, with the coax model providing complete flexibility. All lights are AA battery powered and include a protective plastic cover tube. A) POW126005 $21.95 POW126006 B) POW126010 POW126011

POW301000 POW301005 POW301004 POW301008 POW301009

A $7.25 $39.95 $15.50

Our Inductive Pickup Timing Light features 0-60° advance control, a bright linear xenon flash tube, and a heavy-duty, die-cast, chrome plated housing. The focused fresnel lens assures a brilliant flash at all speeds. This 12 volt DC powered timing light is reverse polarity protected and accurate to 8000 rpm. Advance Inductive Timing Light

$79.95

We now offer two different models of our Self-Powered Timing Lights for 2 or 4 cycle applications. Both feature the desirable onewire inductive lead design. They operate on two “D” cell batteries, so there’s no need to connect them to the vehicle’s battery. Both models are Pro Model magneto compatible and also incorporate a bright xenon flash tube for use in sunny daylight conditions. Our standard model is usable to about 5000 rpm, while our Pro Model can operate beyond the 10,000 rpm range. Our heavy-duty Pro Model features a burn proof, aluminum pick-up with a high temp fire sleeve over the lead cable. Batteries not included.

Std. Model Self-Powered Timing Light Pro Model Self-Powered Timing Light Replacement Xenon Flash Tube Replacement Lead Cable w/Alum. Pickup

6

800-872-7223

Long time racer Dino Campolito always felt that there should be a more precise way to file fit your piston rings. He used the same method everyone else did; file a little and check the fit, file a little and check, etc. Finally, in frustration he set about to invent a better system. The “Ringmaster” Ring Filing Jig allows you to remove an exact amount of material from the end of a piston ring. Once the zinc-plated steel jig is clamped in a vise or secured to a table, the desired shim(s) (.002"-.050") are secured in place under the ring stop. Then insert and secure the ring against the stop, move the stop plate out of the way and file the ring until flush with ring jig. Kit includes jig, file and shims. POW105080

(Self-Powered) Timing Lights

POW301510 POW301515 POW301516 POW301517

$1095.00 $1295.00 $22.00 $16.95 $49.95

“Ringmaster” Ring Filing Jig

Advance Inductive Timing Light

POW301500

670" Cubic Inch Tester 800" Cubic Inch Tester (Special Order) Replacement Thermometer Replacement 2" Diameter Quad Ring Replacement 2" Diameter Puck

B

10" Brass Shaft Flex Light Replacement Bulb for 10" Flex Light 15" Brass Shaft Flex Light Replacement Bulb for 15" Flex Light

Mostly sold to tracks and sanctioning bodies, our Cubic Inch Testers tend to keep everyone honest. With a cylinder capacity of 84 cubic inches in 1/2" increments, our tool can pump a V8 as large as 670 cubic inches total. Easy to use. Just remove the spark plug, push rods and rocker arms from the cylinder being checked. Then, screw in the spark plug adapter and turn the engine over by the starter. The puck and Oring assembly will climb inside the precision bore glass tube to indicate the amount of air (in cubic inches) in that cylinder. Multiply this figure by the number of cylinders to obtain your total engine cubic inches. Our unit comes in a wooden carry case complete with 14mm spark plug adapters, hose, thermometer, temperature correction factors and complete instructions on use.

$49.00 $89.00 $15.00 $38.00

“Ringmaster” Ring Filing Jig

$76.00

Piston Ring Filer

Our Piston Ring Filer offers great economy and ease of use. Our ring filer clamps or bolts to your workbench and has a hand crank to turn the carbide wheel. You just hold the ring against the stops and crank away. Our Supertough 150 grit carbide wheel makes quick work of even the hardest piston rings. POW105050 POW105055

Piston Ring Filer with Carbide Wheel Replacement Carbide Wheel

$65.00 $14.95

Piston Ring Expander Pliers

Here’s a universal tool that handles piston rings of all sizes, from lawn mowers to 5.00" bore mountain motors. Rings can be removed or installed on the piston without fear of breakage from the unnatural twisting that occurs when using just your hands. Our Piston Ring Expander Pliers are heat-treated for long life and durability. POW105060

Piston Ring Expander Pliers

$9.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Pro Piston Knocker

Tapered Ring Compressors

This is no namby-pamby little tool. We designed our Pro Piston Knocker for serious, real world duty. Our tool is constructed of a non-marring composite material and measures a full 13" in length with 2" and 2 1/2" diameter ends. The 2 lb overall weight is achieved through the use of a chamber loaded with steel shot, which provides a dead blow effect; heavy striking force without rebound. We’re sure you’ll find more uses for this handy driver than just knocking pistons into their holes. POW101290

Pro Piston Knocker

$26.00

The absolute best and easiest way to install pistons into the cylinder bore is with one of our Tapered Ring Compressors. These tools gently squeeze the rings and funnel the piston into the bore without ring damage or breakage. Available in all popular sizes, these extra tall aluminum ring compressors are hard anodized for long life. Designed to work on blocks with studs, they also feature a handy finger registration groove. PART #

Pro Freeze Plug Driver Our Composite Freeze Plug Drivers are designed to perfectly install freeze plugs in any engine. Our 6" long drivers feature a stepped design to install the plugs at the proper depth every time. The unique, non-marring composite construction of these tools provides great rigidity and long-lasting durability. Our three piece kit will cover about 95% of all freeze plugs. POW101270 POW101275 POW101280 POW101285

1 1/2"+ Freeze Plug Driver - Shallow 1 5/8"+ Freeze Plug Driver - Deep 1 3/4"+ Freeze Plug Driver - Shallow Pro Freeze Plug Driver Set - all 3 pieces

$9.95 $9.95 $9.95 $29.85

Piston Ring Squaring Tools

Our Piston Ring Squaring Tools will add efficiency to any engine build-up. These hard anodized, aluminum tools push the ring a full .600" down the cylinder bore for accurate end gap measurement. The open design lets you reach through the tool and pull up on the ring for added accuracy. Several sizes and ranges are available, and all work on blocks with head studs installed. POW105001 POW105002 POW105003 POW105004

3.810" to 3.980" Ring Square 4.000" to 4.230" Ring Square 4.240" to 4.380" Ring Square 4.400" to 4.640" Ring Square

$24.00 $24.00 $24.00 $24.00

Adjustable Tapered Ring Compressors

These Adjustable Tapered Ring Compressors work just like our solid models, except that they incorporate a split down the side and a large hose clamp for adjustment. Perfect for those who will be working on a variety of bore sizes or for those sizes not covered by our standard ring compressors. Each model has a range of about .090", so one of these can replace several of our regular style. Hard anodized for wear and color coded for ease of identification. POW106020 POW106025 POW106030

4.000" to 4.090" Range 4.125" to 4.215" Range 4.250" to 4.350" Range

800-872-7223

(Black) (Blue) (Gray)

$35.00 $35.00 $35.00

POW103500 POW103701 POW103736 POW103766 POW103776 POW103810 POW103830 POW103875 POW103905 POW103935 POW104000 POW104005 POW104020 POW104030 POW104040 POW104060 POW104070 POW104080 POW104125 POW104130 POW104135 POW104140 POW104150 POW104160 POW104170 POW104175 POW104180 POW104145 POW104155 POW104165 POW104185 POW104250 POW104280 POW104310 POW104350 POW104360 POW104375 POW104380 POW104390 POW104400 POW104420 POW104440 POW104470 POW104500 POW104530 POW104560 POW104600 POW104625 POW104670 POW104810 POW104820 POW104830

DESCRIPTION 3.500" Tapered Ring Compressor 3.701" Tapered Ring Compressor 3.736" Tapered Ring Compressor 3.766" Tapered Ring Compressor 3.776" Tapered Ring Compressor 3.810" Tapered Ring Compressor 3.830" Tapered Ring Compressor 3.875" Tapered Ring Compressor 3.905" Tapered Ring Compressor 3.935" Tapered Ring Compressor 4.000" Tapered Ring Compressor 4.005" Tapered Ring Compressor 4.020" Tapered Ring Compressor 4.030" Tapered Ring Compressor 4.040" Tapered Ring Compressor 4.060" Tapered Ring Compressor 4.070" Tapered Ring Compressor 4.080" Tapered Ring Compressor 4.125" Tapered Ring Compressor 4.130" Tapered Ring Compressor 4.135" Tapered Ring Compressor 4.140" Tapered Ring Compressor 4.150" Tapered Ring Compressor 4.160" Tapered Ring Compressor 4.170" Tapered Ring Compressor 4.175" Tapered Ring Compressor 4.180" Tapered Ring Compressor 4.145" Tapered Ring Compressor 4.155" Tapered Ring Compressor 4.165" Tapered Ring Compressor 4.185" Tapered Ring Compressor 4.250" Tapered Ring Compressor 4.280" Tapered Ring Compressor 4.310" Tapered Ring Compressor 4.350" Tapered Ring Compressor 4.360" Tapered Ring Compressor 4.375" Tapered Ring Compressor 4.380" Tapered Ring Compressor 4.390" Tapered Ring Compressor 4.400" Tapered Ring Compressor 4.420" Tapered Ring Compressor 4.440" Tapered Ring Compressor 4.470" Tapered Ring Compressor 4.500" Tapered Ring Compressor 4.530" Tapered Ring Compressor 4.560" Tapered Ring Compressor 4.600" Tapered Ring Compressor 4.625" Tapered Ring Compressor 4.670" Tapered Ring Compressor 4.810" Tapered Ring Compressor 4.820" Tapered Ring Compressor 4.830" Tapered Ring Compressor

PRICE $28.00 $28.00 $28.00 $28.00 $28.00 $28.00 $28.00 $28.00 $28.00 $28.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $29.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $31.00 $31.00 $31.00 $31.00 $31.00 $31.00 $32.00 $32.00 $32.00 $32.00

Not sure of your engine’s bore size? Refer to the chart on the inside back cover of the catalog.

w w w. p o w e r h o u s e p r o d u c t s . c o m

7


TOOLS YOU NEED! Universal Degree Wheel Kit

(with cylinder heads On engine) This handy kit is great for the novice as well as the expert because it includes our cam degree video (#POW902000) and a complete instruction booklet. Also included in the kit is: (#POW101500) 9" degree wheel and (#POW151100) dial indicator, 2 lightweight checking springs, a 14mm spark plug hole TDC stop and a wire degree wheel pointer. The kit also includes our cam checking fixture (#POW101540), which fits into the valve cover bolt holes on any engine (1/4"-20 threads) and holds the dial indicator in position to measure cam lift at the rocker, pushrod or lifter. This fixture can also be used to check piston to valve clearance, rocker ratio and even crankshaft end play. The degree wheel can be bolted to the harmonic balancer, or it can be used with one of our Pro Crankshaft Sockets. Everything comes packed in a foam lined plastic carrying case for storage. Our most popular kit.

POW101545

Heads-On Degree Wheel Kit

Universal Degree Wheel Kit (with cylinder heads Off engine) This kit has everything you need to degree the cam in any engine. It includes a 9" degree wheel (#POW101500), our cam degree fixture (#POW101520), which is designed to mount to the deck surface and hold the dial indicator (#POW151100) and its 5" extension over the lifter. The degree wheel pointer (#POW101501) and our plate style TDC stop (#POW101335), plus instructions, are all included in the foam padded plastic carry case. Our Pro Degree Wheel Kit consists of all the same components, except that it utilizes our 16" Pro Degree Wheel (#POW101600) instead of our standard 9" wheel and does not include a case. We suggest the use of one of our Pro Crank Sockets to complete the package. POW101580 POW101680

Heads Off Degree Wheel Kit (9") Pro Universal Degree Wheel Kit (16")

$141.95 $279.95

$139.95

16” Pro Degree Wheel

This serious piece of equipment is designed for the shop that doesn’t mess around. Our monstrous 16" Pro Degree Wheel is machined from 1/4" thick aluminum plate, then blue anodized and meticulously engraved to perfection. The open design allows degree bushing changes while the wheel is still on the engine. The 1" center hole allows it to work with our Pro Crank Sockets or use the included reducer bushings along with your balancer bolt.

Precision Straight Edges Use our Precision Straight Edges to check the straightness or flatness of heads, blocks, flywheels or any flat surface. Constructed from high-quality, heat-treated steel, these 1/4" thick straight edges are precision ground to .001" and epoxy coated for durability. A convenient hang-hole is provided in one end. A wooden storage case is included POW256429 POW256431

24" Precision Straight Edge 36" Precision Straight Edge

$51.00 $55.00

Pro Crank Nuts

Crank Nut – SB $21.95 Crank Nut – BB Chevy Crank Nut – Ford

$21.95 $21.95

Crankshaft Turning Nuts

Our Crankshaft Turning Nuts are designed to slip onto the crank snout so that you have a convenient way to rotate the crank during engine assembly. When degreeing a cam, you can install one of these nuts behind the degree wheel. Precision machined from high strength steel with a gold iridite finish.

8

SB & V6 Chevy, GM 4 Cylinder Big Block Chevy SB Ford, All Buick & Pontiac Big Block & FE Ford Chrysler V8

800-872-7223

$179.95 $2.00

Everyone knows how important it is to degree the cam and check clearances in a performance engine. Our low cost, highly accurate Degree Wheel can be bolted in place or used with one of our Pro Crank Sockets to check your specs. The wheel’s 9" diameter means that it can be used with the engine still in the car. The high contrast, black-on-white, screenprinted design makes it easy to read and easy to clean. POW101500 POW101501

$15.00 $15.00 $15.00 $15.00 $15.00

9" Degree Wheel Wire Degree Wheel Pointer

$16.00 $2.00

Top Dead Center Stops

You need to have one of these when degreeing in any camshaft. They’re designed to positively stop the piston in order to find top dead center. The bolt screws into the spark plug hole, while our universal plate type bolts across any cylinder bore when the heads are off. POW101335

POW101050 POW101055 POW101060 POW101065 POW101070

16" Pro Degree Wheel Wire Degree Wheel Pointer

9” Degree Wheel

This crank nut provides a secure method of attaching your harmonic balancer. With this two piece assembly in place, it allows you to rotate the engine in either direction using a large diameter socket. POW320000 Chevy POW322000 POW324000

POW101600 POW101501

POW101330 POW101332

Deck Plate Style Heads Off (universal) 14mm Bolt Style Heads On (most engines) 18mm Bolt Style Heads On (BB Ford)

$9.95 $9.95 $9.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Pro Crankshaft Sockets

When slipped on the end of a crankshaft, these specially designed sockets let you use a 1/2" drive ratchet or breaker bar to rotate the engine assembly. Our sockets also have the unique feature of a provision to hold our degree wheels or any wheel with a 1" or larger center hole. The knurled retaining nut actually sandwiches the degree wheel and holds it in place. This can then be loosened while on the crank snout so that you can turn the degree wheel independent of the engine, which is really handy when finding TDC. POW103050 POW103075 POW103055 POW103060 POW103070

SB & V6 Chevy, GM 4 Cylinder 1.255" ID with 3/16" Keyway LS1 / LS6 “Gen III”, 1/2" Drive Socket Big Block Chevy 1.610" ID with 3/16" Keyway All Ford, Buick and Pontiac 1.385" ID with 3/16" and 1/4" Keyways All Chrysler and Olds V8 (also fits some blowers) 1.542" ID with a 3/16" and Two 1/4" Keyways 180° Apart

$26.25 $44.95 $29.95 $29.95 $31.50

Our unique Camshaft Installation Handle makes easy work of installing or removing your camshaft. Its hex design handle provides good leverage, as well as a firm, nonslip grip, and stores all necessary hardware inside. This tool will save you time, pinched fingers and nicked cam bearings. POW101035 Chevy V6 & V8 (except hydraulic roller) POW101040 Chrysler 440 & Hemi Engines

$26.25 $26.25

We now have a Sportsman Crank Socket available for Chevrolet V6, Small Block V8 and 4 cylinder engines. The hard anodized aluminum construction promotes long life and low cost. These sockets slip onto the end of the crankshaft to allow a 1/2” drive ratchet or breaker bar to rotate the engine assembly.

GM and Ford Cam Checker Chrysler and Top Fuel Cam Checker Extension-For Use On Chrysler Hemi Optional 0-1" .001" Dial Indicator

$65.00 $65.00 $29.00 $29.95

This handy kit was designed with the pro engine builder in mind. It includes a comfort grip handle and five interchangeable adapters that fit most domestic V6 and V8 engines, including all Chevy, Chrysler and Ford V8s. This tool provides excellent leverage and support for camshaft installation or removal. Universal Camshaft Installation Handle

$52.95

Cam Checking Fixtures

SBC V8, V6 & GM 4 Cyl Crank Socket

$14.95

Crank Gear Installation Tool

We designed this tool for those of you that insist on using a hammer and socket to install the lower timing gear onto the crank. Now, there’s no excuse for not doing this job the right way. Our Crank Gear Installation Tool provides equal distribution of force to press gears on straight. This tool is designed to be used in conjunction with a harmonic balancer installer (#POW101100). Crank Gear Installation Tool

POW101400 POW101405 POW101410 POW151100

POW101045

Sportsman Crank Socket

POW101525

This great little tool of ours actually slides down into the lifter bore and rides on top of the camshaft in order to measure lobe lift and base circle runout. It comes complete with two followers, one for flat tappet or hydraulic cams and one for rollers. Two different Cam Checker Tools are available, and each one is double ended. There are GM (.842" dia.) & Ford (.875" dia.) models and a Chrysler tool with .904" and 1.0" (Top Fuel) ends. The best design feature of this tool is the built in O-ring on each end that holds the tool securely in the lifter bore. Just slide in any standard dial indicator (not included), and you’re ready to go.

Universal Camshaft Installation Handle

Camshaft Installation Handles

POW102050

Cam Checker Tools

(with cylinder head Off) If you’ve ever had to wrestle with a magnetic base and a dial indicator to measure cam lift, you will really appreciate this tool. We designed this fixture to maintain proper geometry while holding a dial indicator (not included) and 5" extension (included) precisely over the lifters. Since it comes with both 1/2" and 7/16" adapters, you can easily attach it to any engine block. We even offer a model for use on blocks with head studs installed. POW101520 POW101530 POW151100

Checking Fixture for $68.95 1/2" and 7/16" Threads Checking Fixture for 1/2" Head Studs $93.95 Optional 0-1" .001" Dial Indicator $29.95

$15.95

Cam Checking Fixtures Universal Cam Checker

Our Universal Cam Checker is a great tool for novice or pro engine builders. This tool slides into the lifter bore for a quick check of lobe lift or degreeing in your new camshaft. The tool is made of precision machined, anodized aluminum and uses non-marring Delrin® expanding segments. It quickly adjusts to fit lifter bores ranging from .750" to 1.050" diameter. Two tips are included for use with flat tappet or roller cams. A 0-1" dial indicator is included. POW351024

Universal Cam Checker

800-872-7223

$99.95

(with cylinder head On) This tool screws into any 1/4"- 20 valve cover bolt hole and with the use of a dial indicator (not included), allows you to measure cam lift at the rocker, pushrod or lifter. This multi purpose tool can also be used to check rocker ratio, piston to valve clearance and even crankshaft end play. This is the same tool that is included in our cam degree kit (#POW101545). POW101540 Cam Checking Fixture POW151100 Optional 0-1" .001" Dial Indicator

w w w. p o w e r h o u s e p r o d u c t s . c o m

$65.95 $29.95

9


TOOLS YOU NEED! Heavy Duty Ring Groove Cleaner

Checking Springs Our set of low tension Checking Springs can be installed by hand in place of your valve springs to simplify measuring piston to valve clearance, rocker arm ratio, cam degreeing, etc. This set of eight springs is enough for one head and definitely qualifies as low cost insurance. POW101325

Set of Eight Checking Springs

Remove carbon from ring grooves on pistons from 2" to 5" diameter with our heavy-duty Ring Groove Cleaner. We like this tool because the hardened cutter wheel includes all twelve of the most popular ring sizes: 3/16", 5/32", 1/8", 3/32", 5/64", 1/16", 1/4", 4.5mm, 4.0mm, 3.0mm, 2.5mm and 2.0mm. $7.60

POW105065 POW105066

Height Mics This is by far the quickest, easiest and A most accurate way to measure valve spring installed height. You install our Height Mic just like you would a valve spring, then expand the tool until it has seated the valve, locks and retainer. This simulated seat pressure allows ultra precise readings. The tool is then read like a micrometer and is accurate to .001". The short model is for 4 and 6 cylinder engines, while the taller version covers most V8s. A) POW101200 B) POW101205

1.600" to 2.200" Range Height Mic 1.400" to 1.800" Range Height Mic

$62.95 $62.95

B

Ring Groove Cleaner Replacement Cutter Wheel

$14.95 $ 5.50

Universal Cam Bearing Installation Kit Our Universal Cam Bearing Installation Kit is the best available to cleanly and accurately install or remove cam bearings from any engine block. With a range of 1.125" to 2.690", this tool should handle any size or make of engine you encounter. The kit’s five expanding mandrels are neoprene covered to protect the inner surface of the bearings. A centering cone and extension rod are also included in the fitted plastic case.

Pro Pushrod Length Checker POW101025

Because they’re designed like a micrometer, you insert our Pro Pushrod Length Checker in place of a pushrod and unscrew it until the correct length and geometry are achieved. You then read the height right from the etched markings on the side of the tool, with each revolution equal to .050". This tool makes it less expensive and much faster than any other method used for this critical calculation. POW101210 POW101215 POW101220 POW101225 POW101226 POW101228 POW101230 POW101235 POW101240

5.800" to 6.800" Length Checker 6.800" to 7.800" Length Checker 7.800" to 8.800" Length Checker 8.800" to 9.800" Length Checker 9.800" to 10.800" Length Checker 10.800" to 11.800" Length Checker 9.800" to 10.800" Cup End Checker 10.800" to 11.800" Cup End Checker 4 Piece Kit 5.800" to 9.800" Range

$16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $19.95 $19.95 $59.00

10

800-872-7223

The task of plugging the oil drain back holes of a block with stand pipes just became easier. Our set of eight extruded aluminum lifter valley standpipes features an internal hex design. This allows the use of an allen wrench for simple installation and removal. Our standpipes utilize a 1/4" NPT thread and provide a simple yet inexpensive way to keep debris out of your oiling system. POW801060

Lifter Valley Standpipes - Set/8

$29.00

Oil Restrictors When building a high performance engine with a solid or roller camshaft, it is sometimes necessary to limit the amount of oil going to the rockers. Our oil restrictors direct more oil to the rod and main bearings, where it’s needed most. The oil gallery must be threaded to use our set screw type restrictors, but no machine work is required for the O-ringed, machined aluminum, screw-in type. Sold in pairs.

Almost anyone who has assembled an engine has reached a point where the balancer is installed, and there’s no convenient way to turn the engine over. Our Engine Rotating Tool, designed to fit Chevy and Ford V8s, bolts onto the harmonic balancer and has provisions for a 1/2" drive ratchet or breaker bar and a 1" socket. Constructed of 17-4 stainless steel, this tool also comes in handy when degreeing your cam with the balancer installed. Engine Rotating Tool

$237.95

Lifter Valley Standpipes

Engine Rotating Tool

POW103090

Universal Cam Bearing Installation Kit

$28.00

POW801080 Chevy V8 Screw-In Type Dual .030" Orifice

$9.20

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Harmonic Balancer Installer

Oil Pump Primers

We always knew we had the best Harmonic Balancer Installer available, but we found a way to make it even better. We eliminated the through bolt and the subsequent hole in the back of each adapter, thus adding even more strength and reliability. With eight interchangeable adapters, our universal kit fits virtually any engine known to man. It uses a thrust bearing to gently “squeeze” the harmonic balancer onto the crank snout on even the tightest of press fit applications. Best of all, even if you do manage to break one of the included adapters, replacement parts are readily available.

Everyone knows how important it is to prime the oil pump before starting up that newly rebuilt engine...right? Well, our Oil Pump Primers help get the job done. They all feature a nonslip, triangular drive tip for attaching a drill, as well as a black-oxide coating for added durability. The Pro models have a top alignment collar. The Chevy tool also includes a bushing to pressurize the upper valve train. The Econo models consist of the oil pump drive shaft only.

POW101100

POW111101 POW111102 POW111103 POW111104 POW111105 POW111106 POW111107 POW111108 POW101110 POW101111 POW111112 POW111113

Universal Harmonic Balancer Installer Kit Replacement Parts List Replacement 7/16" Adapter Replacement 1/2" Adapter Replacement 9/16" Adapter Replacement 5/8" Adapter Replacement 3/4" Adapter Replacement 12mm Adapter Replacement 14mm Adapter Replacement 16mm Adapter Replacement Thrust Bearing Replacement Drive Nut Replacement Body/Shaft Knurled Ring for Adapter

$6.00 $6.00 $6.00 $6.00 $6.00 $6.00 $6.00 $6.00 $12.50 $6.00 $20.00 $2.77

$22.95 $21.95

If you feel like you don't have enough hands while working on your Dual Overhead Cam engine, this is the tool for you. This adjustable tool fits onto the cam gears by way of knurled pins. Once the tool is in place, your cam gears remain stationary while replacing timing belts or chains or reassembling after valve train swaps. The Powerhouse® Cam Gear Lock adjusts to fit many different applications, so there is no need to buy several tools for the same task. It is made of anodized aluminum, which is lightweight, yet durable enough to ensure years of service. POW368800

DOHC Cam Gear Lock

$35.95

Rod Bolt Stretch Gauge

$99.95

THE TOOL STORE T H AT N E V E R CLOSES! ORDER ONLINE 24 HOURS A DAY! www.powerhouseproducts.com

Ever wonder why rod bolt manufacturers supply stretch factors as well as torque settings? Well, it’s because stretch is the most accurate way to measure fastener pre-load. Our anodized aluminum Rod Bolt Stretch Gauge is designed to actually hold itself onto the rod bolt while it’s being tightened. The included .001" dial indicator has been modified with a super high tension spring for superior holding power and precision. Our lightweight stretch gauge also features an adjustable anvil to accommodate rod bolts up to 2.750" in length. POW101300

Rod Bolt Stretch Gauge

$119.95

Precision Warp & Alignment Gauge Use this 3/4" bar like a straight edge to check flatness of heads and blocks, and use it to check curved surfaces like main saddles. This heavy-duty, hardened, precision ground bar is accurate to .002" over its entire 26" length. Included is a hang up hook and an anti-roll block for ease of use and storage. POW256430

800-872-7223

$22.95

DOHC Cam Gear Lock

This tool features a hardened, threaded shaft and alloy nut, combined with a roller thrust bearing puller plate. The kit fits GM, Ford and Chrysler and includes various size puller bolts. A plastic storage box is included. Pro Balancer Puller / Installer

POW101155 POW101160

Pro - All Chevy V8 & 90° V6 (with bushing) Pro - Ford 260-351W (1/4" hex drive) Pro - Ford 302-351 C&M & 400-460 (5/16" hex drive)

$45.00

Pro Harmonic Balancer Puller / Installer

POW300000

POW101150

26" Warp & Alignment Bar

w w w. p o w e r h o u s e p r o d u c t s . c o m

$59.00

11


TOOLS YOU NEED! Telescoping Gauge Sets

Pro Valve Lock Remover/Installer Tool We all know how scary it can be to install or remove valve locks with just your fingers. One slip and you’re looking at one painful injury. This new tool is definitely the best we’ve seen for performing this delicate task. To install keepers, compress the valve spring, place valve locks on the magnetic stem of the tool, push the body of the tool over the locks and position them on the valve stem and release the valve spring. To remove keepers, use the magnetic stem to pluck off the valve locks once the valve spring is compressed. We offer several sizes that cover most automotive and motorcycle applications. POW351006 Pro Valve Lock Tool 5mm, 5.5mm, and 6mm POW351007 Pro Valve Lock Tool 7mm, 8mm, and 5/16" POW351008 Pro Valve Lock Tool - 11/32" POW351009 Pro Valve Lock Tool - 3/8"

$30.95

$30.95 $30.95

$29.00 $69.95

Electronic Digital Calipers If you’re looking for a simple, quick and very precise measuring tool, you’ve found it. With a 0-6" range and a readout to .0005", our Digital Calipers can handle any inside, outside and depth measurements. These calipers are constructed of high-quality, stainless steel, then all measuring surfaces are precision ground and lapped. The easy-to-read LCD display can be switched over to metric and will read to .01mm in this mode. A durable, fitted plastic case is included.

Our CNC machined aluminum Valve Seal Installer makes installing PC seals a breeze. This tool works with .500" and .531" PC seals and prevents seal distortion or gouging during installation. Anodized for durability. Valve Seal Installer

POW151275 Powerhouse® 5/16" to 6" Gauge Set POW205020 Fowler 5/16" to 6" Gauge Set (USA)

$30.95

Valve Seal Installer

POW351395

These gauges are used to measure slots, grooves, recesses, cylinders, etc., and are especially useful for doing size comparisons. To use, just insert the appropriate gauge into the workpiece and turn the knob at the end of the handle. The spring-loaded ends will “snap” open to the maximum size allowed. Then, tighten the knob, remove the gauge and measure across the tips to find your inside measurement. Each set contains six gauges with a total range of 5/16" to 6" fit into a handy storage pouch.

$19.95

POW256425

Central 0 to 6" x .0005" Digital Calipers

$179.00

Universal Rod Guide Tool Valve Seat Runout Gauges These units slip over the pilot of your valve grinding equipment and measure valve seat concentricity and runout to .001". POW256440

3/8" Pilot Model (B&D, K.O. Lee, Neway and Olcott machines)

$89.00

Pro Valve Lapping Tool

POW101295 POW101296

Tired of the prehistoric valve lapping ritual? There is finally an answer to your prayers. This patented valve lapping tool uses a vacuum generating piston to create a suction that will not slip off the valve. It includes three interchangeable suction cups, which allow use on virtually any valve size. It also features a non-slip, foam rubber grip that improves grip and comfort over the traditional "wooden stick" designs. The tool is made from machined aluminum, which will provide durability and value for years to come. POW351051 $29.95 POW351069

12

800-872-7223

Universal Rod Guide Tool Big Block Extensions

$19.95 $9.95

Small Hole Gauge Set This set of four gauges is designed to allow you to measure holes from 1/8" to 1/2" in diameter. Once you insert the tip of the tool into a hole, you tighten the knob and remove it. You then measure the ball tip to find your hole diameter. These are great for checking valve guides or any other very small orifices.

Pro Valve Lapping Tool Replacement Suction Cup Set

Even if you only build one engine in your lifetime, you should have one of these tools in your box. Most rod bolt covers just help to prevent nicked crankshafts when installing rods onto the crank, but our tool can also be used during disassembly. Remove the rod cap, and install our Universal Rod Guide Tool over the bolts. Then, use the palm of your hand to drive out the piston and rod assembly. Another unique feature is the ability of our tool to work with any size rod bolts, or you can use the included adapters for rods with capscrews.

$15.95

POW205015

Fowler 1/8" to 1/2" Gauge Set

$69.00

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Hook, Pick, Point, Scribe & Magnet All In One

Stainless Steel Dial Calipers If you could only have one precision measuring tool, this would be the one to own. Our Dial Calipers are designed to let you measure just about any inside, outside or depth dimension to .001". The rigid stainless steel construction, screwed-on rack, smooth thumb rollers and 0-100 one revolution dial make these calipers simple to use. A fitted protective case is also included with all of our calipers. POW151205 POW151215

Our Hook and Pick Set probably has a thousand uses around the shop, like removing o-rings or spiralox, scribing lines, marking tools, installing small springs, etc. This set includes a hook, pick, point and scribe that screw into a handle that doubles as a magnetic pick-up tool. A handy storage pouch is also included.

Powerhouse® 0 to 6" Dial Calipers $44.95 Powerhouse® 0 to 12" Dial Calipers $99.00

Fowler Pro Dial Bore Gauge This Fowler Pro Dial Bore Gauge is the same one you see being used at top machine shops all over the world. The centering mechanism is what really sets this unit apart from the rest. Two centralizing plungers move independently of each other and the measuring plunger but are interconnected through a common buffer plate. This type of design assures accurate, repetitive readings to .0001". The die-cast indicator shroud provides protection, as well as a convenient handle to lower this 15" long tool into any bore. A custom wood storage case is also included. If you will only work with the best, this is the bore gauge for you. POW205001

Fowler 2-6" x .0001" Pro Dial Bore Gauge

$749.95

Dial Bore Gauges

A This is something that every engine builder, whether a beginner or a seasoned pro, should own. A Dial Bore Gauge, once set with a micrometer, is used to determine size, straightness or taper on main, rod or cylinder bores. We offer B two models to meet your needs. Our economically priced .0005" model is fine if you just want to check your machinist’s work. Our Central .0001" unit is designed with high precision and repeatability in mind. Our Central Bore Gauge features a 2" to 8" range and an extended reach handle, which is perfect for reaching center main-bearing bores. Each kit is supplied with a fitted case that also keeps all of the anvils and extensions organized. A) POW205025 B) POW256467

Powerhouse® 2" to 6" x .0005" $99.00 Dial Bore Gauge Central 2" to 8" x .0001" $299.00 Dial Bore Gauge

800-872-7223

POW351695

Hook and Pick Set

$9.95

Dial Indicators We offer only the highest quality jeweled movement .001" Dial Indicators. All incorpoA B C rate 0-1" travel, 0-100 dial face, revolution counter, .001" accuracy and 2 1/4" diameter with a 3/8" shaft. These lug back indicators are compatible with all of our products that require use of a dial indicator. A longer range 0-2" model is also available. A) POW151100 B) POW151102 C) POW254345

Powerhouse® 0 to 1" Dial Indicator Powerhouse® 0 to 2" Dial Indicator Central 0 to 1" Dial Indicator (USA)

$29.95 $55.00 $55.00

“Anyform” Dial Indicator Magnetic Base This base has many segments that act like a contour gauge, allowing it to conform and hold to any shape. This unique tool has a fine adjustment feature and is especially useful on engine blocks, where there may not be a handy flat surface in the spot you need to mount a dial indicator. Once you own one of these, you’ll wonder how you ever got along without it. It also saves on set-up time. POW151135

Powerhouse® “Anyform” Magnetic Base

$84.95

Dial Indicator Magnetic Bases B These bases will hold any lug back dial indicator in just about any position you could want. The high strength permanent magnet provides about 100 lbs of pull, and the A on/off switch makes it easy to set up and C use. Our bases also incorporate a fine adjustment, which is used to gently move the indicator into place. Our new Heavy-Duty model packs a whopping 175 lbs of pull and features a double bar design for increased flexibility. Speaking of flexibility, our Magnetic Flex-A-Base is the ultimate in easy-to-use magnetic bases. If you plan to do any precision work, you must own a dial indicator and a magnetic base. A) POW151125 B) POW151140 C) POW151145

Magnetic Base w/Fine Adj. Heavy-Duty Mag Base w/Fine Adj. Magnetic Flex-A-Base

$29.00 $39.95 $57.95

w w w. p o w e r h o u s e p r o d u c t s . c o m

13


TOOLS YOU NEED! Dial Indicator Accessories

.0001" Outside Micrometers

Our 22 piece Dial Indicator Point Set is one of those invaluable items that you never seem to have around when you need it. Points, extensions, wide tips, bent tips and more are included in the plastic storage case. We also have Flat Backs and Lug Backs to modify your dial indicator mounting method. POW151101 POW151103 POW151104

Flat Back For Dial Indicator Lug Back For Dial Indicator 22 Piece Dial Indicator Point Set

$2.75 $2.75 $8.95

Dial Indicator Extensions Our precision made Dial Indicator Extensions will allow you to extend the reach of most any dial indicator. They’re black-oxide coated for durability and utilize a slightly rounded tip for easy positioning. POW151110 POW151111 POW151112 POW151113 POW151114 POW151115 POW151116 POW151120

1/2" Dial Indicator Extension 1" Dial Indicator Extension 2" Dial Indicator Extension 3" Dial Indicator Extension 4" Dial Indicator Extension 5" Dial Indicator Extension 6" Dial Indicator Extension Kit - 1/2" Through 5" (6 pcs.)

$3.95 $4.95 $5.95 $7.95 $8.95 $8.95 $9.95 $34.95

Compact Dial Indicator Magnetic Base

Compact Magnetic Base w/ Attachments

POW151001 0 to 1" Outside Micrometer POW151002 1" to 2" Outside Micrometer POW151003 2" to 3" Outside Micrometer POW151004 3" to 4" Outside Micrometer POW151005 4" to 5" Outside Micrometer POW151006 5" to 6" Outside Micrometer POW152003 0 to 3" Outside Micrometer Set POW152004 0 to 4" Outside Micrometer Set POW152006 0 to 6" Outside Micrometer Set* *Our Best Value! (shown)

Our Micrometer Standards are used to calibrate and zero micrometers and other types of precision measuring instruments. Our standards are hardened, then precision ground and microlapped. They also incorporate a heat insulating cover to prevent your body heat from altering their length.

You can’t properly measure bearings with your ordinary micrometer because of the flat contact surface. With their unique ball shaped anvils, these micrometers can measure bearings or any other curved surface to .0001". The measuring range of this tool is 0-1", and it comes in a padded box. POW256190

14

800-872-7223

$13.00 $14.95 $16.95 $19.95 $20.95 $23.50 $24.50 $31.50 $33.00 $34.95

Bearing Micrometers

Our Inside Micrometers are handy for measuring rod, main, cam or cylinder bores to .001". The superior tube-style design of these mics offers extra strength, rigidity and accuracy when performing any inside measurement. All sets come furnished in a fitted case that organizes the extensions and handles. Central 2" to 12" Inside Mic Set

1" Micrometer Standard 2" Micrometer Standard 3" Micrometer Standard 4" Micrometer Standard 5" Micrometer Standard 6" Micrometer Standard 7" Micrometer Standard 8" Micrometer Standard 9" Micrometer Standard 10" Micrometer Standard

$61.95

Inside Micrometer Set

POW256220

$19.00 $26.00 $32.00 $39.00 $49.00 $59.00 $69.00 $109.00 $199.00

Micrometer Standards

POW201031 POW201032 POW201033 POW201034 POW201035 POW201036 POW201037 POW201038 POW201039 POW201040

We don’t call this one the “mighty mag” for nothing. It’s the most compact mag base available but still provides 45 lbs of pull. You can mount a dial indicator (not included) directly to the base or mount it to the extension rod for a longer reach. This tool is great for mounting a dial indicator where space is limited. POW151130

Our micrometers are a great value because of their high quality and low price. These high precision mics include all the best features: ratchet stop thimbles, carbide measuring tips, locking levers, calibration standards, adjuster wrenches and fitted wooden cases. We searched around the world for value priced micrometers that would meet our exacting standards for both accuracy and repeatability. We are proud to put our name on these high quality import tools that are priced well within the reach of even the beginning racer or engine builder.

$119.95

Central .0001" Bearing Micrometer

$69.00

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Crankshaft Journal Micrometers

Granite Comparator Stand

These high-quality, American-made micrometers are specifically designed for measuring rod and main journals. The graduations are laid out so that the measurement is actually read with the micrometer in position (upside down). The unique range and .0001" accuracy make these mics a great value. A foam padded box and a setting standard are also included.

This is a great tool for checking flatness or runout of parts, or it can be used as a height comparator. The two-inch thick 6"x 6" solid granite base is guaranteed flat to .00005" and provides the ultimate hard flat surface. Use the fine adjustment knob for the dial indicator (not included) to precisely perform a variety of measuring tasks.

POW256260

Central 1.5" to 2.5" .0001" Mic

$115.00

POW151150 POW151100

Granite Comparator Stand $39.95 Optional 0 to 1" Travel Dial Indicator $29.95

Micrometer Stands Deck Bridge

This is the proverbial “third hand” that you always need but never seem to have. These stands are especially useful when using a micrometer to set up a dial bore gauge. This multi-position tool can also be used to hold small projects or other instruments. POW151020 POW201020

Powerhouse® Micrometer Stand Fowler Pro Micrometer Stand

$25.00 $36.00

Harley Head Plate If you work on Harley Davidson® cylinder heads, you need this tool. Our new Harley Head Plate works with Evolution™, Sportster™ and Shovel Head™ styles to act as a foundation when doing any cylinder head work. Once the head is attached to the anodized aluminum plate, you can use ordinary peg head holders to position the head for porting and polishing, guide work, grinding seats and checking stem heights. Our plate is also perfect for mounting on a seat and guide machine or bolting to a resurfacer. POW351415

Harley Head Plate

$199.95

Pinion Depth Setting Tool This is the most versatile and low cost kit on the market to measure pinion depth when setting up any rear end. Because of its unique design, our Pinion Depth Setting Tool will truly work on any differential housing. Since our tool attaches to the split where the carrier bearing retaining cap bolts on, there’s no need for those expensive bolt-in spacers that some other kits use. Our kit comes with everything you need to measure pinion depth to .001", including a very complete instruction booklet and a chart of factory pinion depths. All packed in a plastic storage case. See page 30 for our Pinion Depth Setting Video. POW356000

Universal Pinion Depth Setting Tool

$169.95

We offer two versions of our popular Deck Bridge to check piston dome height and deck clearance while assembling an engine. Both have a 4 3/4" span and three holes for dial indicator position (indicators not included), or mount an indicator in each end to check piston rock. While our standard model is held in place by good old gravity, our pro model has super strong magnets in each leg to attach it firmly to the deck surface. As an added feature, the pro model holds dial calipers in an upright position to measure crankshaft stroke. Every engine builder should own one of these blue anodized aluminum beauties. POW101310 POW101315 POW151100 POW151205

$19.00 $51.95 $29.95 $44.95

Compound Angle Piston Vise Our Piston Vise is by far the best buy on the market when you look at all the features offered versus our everyday low price. Our vise locates and holds the piston by two wrist pins. Once it’s set up, you can just drop in the other pistons and go. It will even hold a piston upside down for balancing or lightening operations. The compound angle feature is what truly makes this vise unique. It not only rotates the piston from front to back but also from side to side (necessary for Ford and Big Block Chevy pistons). This blue anodized beauty is rigid and repeatable. POW351090

Angle Vise - 4.600" Piston Max.

$779.95

Piston Dome Thickness Checker It’s crucial to know how much dome/deck thickness you have before modifying piston domes or fly-cutting valve pockets. Our tool utilizes a .001" dial indicator (included) and a specially designed contact point to measure even the most complicated dome shapes. Every machine shop should have one of these. POW351080

800-872-7223

Standard 3-Hole Deck Bridge Pro Magnetic 3-Hole Deck Bridge Optional 0 to 1" .001" Dial Indicator Optional 0 to 6" .001" Dial Calipers

Piston Dome Thickness Checker

w w w. p o w e r h o u s e p r o d u c t s . c o m

$149.00

15


TOOLS YOU NEED! Piston Dome CCing Tool

Drive Shaft Angle Gauge

To accurately calculate true compression ratio you must know your piston dome volume, gasket CCs and deck CCs. Our Piston Dome CCing Tool, when used in conjunction with a buret, will give you all of these figures. The plate works by bolting onto the deck surface above any cylinder. Then, with the piston at TDC, fill the plate from the buret. Directions explain use as well as all necessary formulas to precisely calculate compression ratio.

Our Drive Shaft Angle Gauge is an absolute necessity for anyone who believes in preventive maintenance. Knowing the drive shaft angle can prevent costly repairs to the rear-end and optimize performance of related components. This tool measures the drive shaft angle from 0° to 8° with both positive and negative readings. The simple, yet brilliant design includes a magnetic base to measure support tool. Gold anodized aluminum.

POW351125

V6 & Small Block Chevy Piston Dome CCing Tool

$38.00

Pro Head CC Kits

POW351032

Our lineup of burets offers you the size that best suits your needs. Our kits provide everything you need to properly CC cylinder head combustion chambers, intake and exhaust runners, intake manifolds or cylinders. Our precision glass burets are compatible with alcohol, parts washer fluid or anything else you would want to put in them. Our easy-to-read scales are marked off in .2cc increments (except 250cc model) and actually read out the amount you’ve poured, so there’s no math involved. All of our kits contain a precision glass buret with integral petcock, a stand and clamp assembly, a flat plexiglass plate to cover the combustion chamber and instructions on how to properly CC cylinder heads.

$99.00 $99.00 $149.00 $179.00 $69.00 $69.00 $119.00 $149.00 $29.00 $6.00

Magnetic Pinion Angle Gauge Our magnetic based angle gauge allows for quick and accurate measurement of your vehicle’s pinion angle. This tool works with drive shaft still in place. POW351033

Magnetic Pinion Angle Gauge

$69.95

Sportsman Head CC Kit If you only occasionally need to CC cylinder heads or don’t need to be ultra precise, this is the kit for you. Our Sportsman Head CC Kit uses a 100cc graduated flask that measures in 1cc increments, so you can get fairly accurate results without the expense of a buret. This kit also includes a combustion chamber sealing plate and instructions on how to CC cylinder heads. POW351155 POW351105 POW351120

16

100cc x 1cc Sportsman Head CC Kit Replacement 100cc x 1cc Graduated Flask Replacement Plexi Chamber Sealing Plate

800-872-7223

$93.95

A/N Fitting Wrenches

Note: All glass burets must be shipped by air service.

POW351170 50cc x .1cc Pro Head CC Kit POW351150 100cc x .2cc Pro Head CC Kit POW351140 125cc x .2cc Pro Head CC Kit POW351160 250cc x 1cc Pro Head CC Kit Replacement Components POW351165 50cc x .1cc Glass Buret POW351100 100cc x .2cc Glass Buret POW351135 125cc x .2cc Glass Buret POW351115 250cc x 1cc Glass Buret POW351110 Stand and Clamp Kit POW351120 Plexiglass Chamber Sealing Plate

Drive Shaft Angle Gauge

$29.00 $24.00 $6.00

These wrenches are made specifically to tighten all those expensive aluminum fittings you so proudly display all over your car. Precision machined of 6061 T6 aluminum, sized and relieved in the corners, our A/N Fitting Wrenches provide a perfect fit so they won’t mar your fittings. The compact design handles help prevent over-tightening and won’t get in the way when using them in cramped quarters. All of our aluminum wrenches are color code anodized and size stamped to make identification and life in the pits a little easier. POW302025 POW302030 POW302003 POW302004 POW302006 POW302008 POW302010 POW302012 POW302016 POW302020

4pc Set (#6,#8,#10,#12) 8pc Set (#3 through #20) #3 A/N Wrench 1/2" Hex Size #4 A/N Wrench 9/16" Hex Size #6 A/N Wrench 11/16" Hex Size #8 A/N Wrench 7/8" Hex Size #10 A/N Wrench 1" Hex Size #12 A/N Wrench 1 1/4" Hex Size #16 A/N Wrench 1 1/2" Hex Size #20 A/N Wrench 1 13/16" Hex Size

$39.95 $79.95 $ 8.95 $ 9.25 $ 9.50 $ 9.95 $11.95 $12.50 $14.95 $16.95

Universal Lifter Bore Grooving Tool Now you can increase oiling to the lifter bores just like the pros but for a fraction of the cost. Our easy-touse Universal Lifter Bore Grooving Tool can be adjusted to fit all lifter bore diameters and is small enough to fit in your shirt pocket. It is made of anodized aluminum and has a durable, three-edged cutting bit. Included with the tool are the necessary allen wrenches for quick setups. Replacement cutting inserts are also available. POW351023

Universal Lifter Bore Grooving Tool

$69.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Lockbuster - Spiral Lock Remover

Arbors & Seat/Guide Cutters

PowerhouseÂŽ Products now offers the ultimate tool for removing those annoying wrist pin spiral locks. Anyone who has ever had to remove the spiral locks on racing pistons knows how difficult the chore is. The Lockbuster makes the job easy. The special design of the interchangeable head gets under the lock and slides it easily out of the pin groove. Part numbers below are for the handle and one head. You can easily purchase additional heads for other wrist pin sizes from the additional chart below.

Most high performance engines require larger-than-stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our interchangeable arbors, which are sold separately, so order the one that matches your valve stem diameter.

Note: Older style spiral locks are not compatible with the tool head without some minor modifications to the locks. Most piston manufacturers now use the new style that is compatible. If there is a question, we offer the correct spiral locks for your pistons on the chart below.

Handle and Head Kits POW351091 SB Ford .912 Diameter Head POW351092 SB Chevy .927 Diameter Head POW351093 BB Chevy .990 Diameter Head Lockbuster Head Only POW351094 .927 Diameter Head POW351096 .990 Diameter Head Special Spiral Locks POW351097 .927 x .042 Double Wound POW351098 .990 x .042 Double Wound

$89.95 $89.95 $89.95 $62.20 $62.20 $.99 each $.99 each

POW351319 POW351320 POW351325 POW351330 POW351335 POW351340

Stud Remover/Installer

POW351341

Our Stud Remover/Installer will speed things up the next time you put in or take out a set of heads or main studs on an engine. This tool utilizes a cam mechanism designed to fit into tight spots and get out those hard-toturn studs. Our tool will handle everything from 1/4" to 3/4" diameter studs.

POW351342 POW351345 POW351350

Note: Not intended for use with pressed in studs.

POW351370 POW351590

Stud Remover/Installer

$22.95 POW351380

Block Square & Deck Height Gauge

POW351390

Our Block Square and Deck Height Gauge allows you to precisely measure the deck height of any block. This unique tool measures from the main bearing bore to the deck surface of the block and can be used to check block squareness from end to end or bank to bank. Now you can determine if a block has been decked, and if so, how much. Three micrometer standards, 8", 9" and 10", are included to set up and zero the dial indicator (not included). POW351088 POW151100

Block Square and Deck Height Gauge Optional 0 to 1" .001" Dial Indicator

$229.00 $29.95

This simple tool makes assembling pushrod kits so easy anyone can do it. You just cut the tubing in a lathe, deburr the ends and use our Pushrod Assembly Tool to press the ends in place, without the risk of splitting or bending the pushrod. So put away that block of wood and hammer, and assemble pushrods the right way. POW351310

Pushrod Assembly Tool

800-872-7223

$35.95 $35.95 $35.95 $35.95 $35.95 $35.95 $39.95 $39.95 $39.95 $39.95 $12.95 $12.95 $12.95

Lifter Organizer/Protector Box This unique product of ours is great for keeping lifters in proper sequence during an engine rebuild or storing lifters that are not in use. Our plastic molded Lifter Organizer/Protector Box works with any flat tappet or hydraulic lifters and will even work with roller lifters if they have removable link bars. The handy lid keeps out dust and dirt and will only fit on one way, so you can’t mess up the order. POW101800

Pushrod Assembly Tool

Spring Seat Cutter 1.320" O.D. Spring Seat Cutter 1.440" O.D. Spring Seat Cutter 1.550" O.D. Spring Seat Cutter 1.580" O.D. (For use with cup) Spring Seat Cutter 1.680" O.D. (For use with cup) Spring Seat Cutter 1.740" O.D. (For use with cup) Valve Guide Cutter .446" (For triple springs) Valve Guide Cutter .485" (For triple springs) Valve Guide Cutter .530" (For standard teflon seals) Valve Guide Cutter .625" (For stock diameter seals) Arbor/Pilot for Cutters - 5/16" Diameter Arbor/Pilot for Cutters - 11/32" Diameter Arbor/Pilot for Cutters - 3/8" Diameter

Lifter Organizer/ Protector Box

$5.95

FILL THE GAPS IN YOUR TOOLBOX AT w w w. p o w e r h o u s e p r o d u c t s . c o m $99.95

w w w. p o w e r h o u s e p r o d u c t s . c o m

17


TOOLS YOU NEED! Rocker Stud Puller & Tap Guide

Flow Bench Valve Opening Fixture Our Flow Bench Valve Opening Fixture makes it easier than ever to precisely set and measure valve opening on a cylinder head while using a flow bench. Our fixture is designed to fit virtually any cylinder head and has a .001" backward reading micrometer head mounted to it. The sliding bar feature makes set-up and testing easy and fast.

Our Rocker Stud Puller & Tap Guide fixture provides a convenient means to remove pressed in rocker studs. Just slide the tool over two side-by-side studs and crank down on the retaining nut to force out the stud. Then use the tool, with the supplied arbor, to ensure proper alignment when tapping the boss for screw-in studs. POW351300

Rocker Stud Puller & Tap Guide

$19.95 POW351085

Stud Boss Cutter When switching over your factory heads for screw-in studs, it is necessary to machine down the stud boss equal to the thickness of the new studs jam nut plus the guide plate thickness. Our Stud Boss Cutter includes a universal arbor that also acts as a pilot/guide and fits into the original stud hole. POW351360 Stud Boss Cutter

$45.00

Our set of four Block and Head Handles makes easy work of moving blocks, heads or even complete engines around the shop. Constructed of 7075 T6 anodized aluminum, they utilize heat-treated, grade 8 inserts for durability and strength. Our handles will screw into any 3/8" coarse thread hole found in most engine blocks and cylinder heads. Set of Four Block and Head Handles

$49.95

When switching factory Small Block Chevy heads over to 1.6 ratio rockers, the pushrod will rub on the bottom of the pushrod slot in the head. Long time cylinder head man Louis Cox designed this tool to simplify the modification needed in this situation. Our tool allows you to use a hand drill with a 5/16" drill bit to elongate the pushrod slot in the precise location and size necessary. This tool is for limited use, so purchase a new one for each set of heads. Pushrod Slot Louis Tool

18

800-872-7223

$29.00 $3.95

Oil Filter Cutter No need to buy a high dollar oil filter just because you want to be able to open it up and look inside. Just use our Oil Filter Cutter to cut open up any cartridge type filter. Once you have it open, it’s easy to unfold the filter element in order to look for bits of metal or other debris. Our optional stand really makes the job easier when cutting filters. POW351646 POW351647

Oil Filter Cutter Replacement Blade

$69.00 $11.95

Triple Beam Scale We’re sure you remember using one of these at school to weigh dissected frog parts in science class, but they’re also perfect for weighing pistons, rods, clutch weights, etc. The capacity is 2610g, but the best part is that the accuracy is .1 gram. Our Triple Beam Scale features a big stainless steel platform and a handy storage compartment. This is a good low cost/high accuracy alternative to our digital scales.

A stripped spark plug hole is not a fun thing to fix. Avoid this trouble by using our Spark Plug Hole Thread Chaser to renew damaged threads and allow firm seating of plugs. Our long 13/16" hex design prevents wobble, while the neoprene ring holds the heat-treated chaser snugly in your socket. Our tool is doubleended to fit both 14mm and 18mm threads. 14mm & 18mm Thread Chaser

1/4" Oil Galley Pipe Plug Socket Replacement 1/4" Pipe Plug Bit

$29.00

Spark Plug Hole Thread Chaser

POW351690

You already know what a pain it is to remove those pesky oil galley pipe plugs in an engine block, but now we have the ultimate extraction tool. With our pipe plug socket you can remove male and female plugs without worrying about tool failure. Our 1/2" drive impact sockets utilize a retractable tool steel bit with sharp corners to ensure a perfect fit in the pipe plug. POW351655 POW351656

Pushrod Slot Louis Tool

POW351305

$249.95

Pipe Plug Sockets

Block & Head Handles

POW351520

Flow Bench Valve Opening Fixture

$4.95

POW351240

2610g x .1g Triple Beam Scale

$144.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Digital Scales Save money by doing your own component balancing and match weighing with our precision scales. These compact scales are perfect for weighing or balancing pistons, rods, clutch weights, etc. Our 5000g model weighs in one gram increments and also has an ounce mode with a 175 oz capacity. Our 2000g scale weighs in 1/10th gram increments for those who need more precision. Both scales will automatically round up or down and also feature a tare function. The tare feature is great for balance work because the scale will zero on any item, then tell you the difference (+ or -) when the next object is placed on the scale. Both scales run on a nine volt battery or optional A/C adapter. Scales can be used while inside their foam padded carry case (not included). POW351200 POW351210 POW351215 POW351216 POW351220

5000g x 1g Electronic Digital Scale 2000g x .1g Electronic Digital Scale Fitted Plastic Carry Case for 2000g Fitted Plastic Carry Case for 5000g 9 Volt A/C Adapter

$169.00 $359.00 $24.95 $24.95 $16.00

Pro Crankshaft Stroke Gauge Crankshaft stroke is one of the most critical dimensions when building an engine. If the stroke is off, everything else will be, too. Our Pro Crankshaft Stroke Gauge comes complete with a 0-5" travel dial indicator so you can check any stroke up to 5" long with .001" accuracy. This universal tool can be used two ways: place the fully adjustable legs on the crank’s main journals, zero the indicator on top of the rod journal and spin crank over to get the reading at the lowest point or place on top of the short block and zero indicator on piston at TDC, then rotate engine to BDC and read indicator for stroke length. POW351045

Pro Crankshaft Stroke Gauge

$549.95

Sportsman Crankshaft Stroke Checker

Sportsman Crank Stroke Checker Optional 0-6" .001" Dial Calipers Optional 0-6" .0005" Digital Calipers

800-872-7223

This handy Connecting Rod Balancing Fixture is designed to hold each end of the rod on the scale separately. This allows you to measure both the large and small end weight for added accuracy. POW351250

Connecting Rod Balancing Fixture

$189.00

Sportsman Connecting Rod Balancer This neat little fixture was designed to match-weigh any set of SB Chevy large journal connecting rods. This is a great way to do the job yourself without the expense of a scale and rod fixture. What our tool actually does is compare two rods at a time to show which one is heavier. You then remove material from all rods except the lightest, until all rods are of equal weight. Our Sportsman Connecting Rod Balancer is designed to hold rods from either the large or small end, so you can balance both rotating and reciprocating weights. POW351245 Sportsman Connecting Rod Balancer

$68.95

Pro Connecting Rod Vise We now offer the ultimate Pro Connecting Rod Vise. Designed to hold two aluminum or steel rods at once, this fixture utilizes centering guide pins for mounting in a vise as well as bolt holes for permanent bench mounting. The anodized aluminum construction will not harm aluminum rods, and the unique adjustable quick release latch makes this the quickest rod vise ever. POW351180 POW351185

This unit does the same job as the more expensive stroke gauges, except that it uses a set of 0-6" dial calipers (not included) instead of a long range dial indicator. Just set it up on the crankshaft main journals, zero the calipers at the top of the rod journal, then rotate the crank to the bottom of the stroke and take your reading to .001". You can even use this tool on assembled short blocks by zeroing the calipers on the piston at TDC, then measuring down to BDC. Our Sportsman Crankshaft Stroke Checker is designed to work with any dial calipers.

POW351040 POW151205 POW256425

Connecting Rod Balancing Fixtures

Pro Connecting Rod Vise Sportsman Rod Vise (similar to ProModel but without quick release)

$129.00 $89.95

Balance Shop Kits Our Balance Shop Kits combine our precision digital scale, carry case, a/c adapter and connecting rod weighing fixture to provide everything needed to properly balance your engine components. Think of all the money you could save by doing your own piston, rod and component balancing. Kit price includes a big savings! $ 84.95 $ 44.95 $179.00

POW351190 5000g x 1g Balance Shop Kit POW351195 2000g x .1g Balance Shop Kit

w w w. p o w e r h o u s e p r o d u c t s . c o m

$359.00 $529.00

19


TOOLS YOU NEED! Heavy-Duty Manual Valve Spring Compressor At last, there’s an easy-to-use Manual Valve Spring Compressor that can handle all of the monster valve springs being used today. Our superduty compressor is constructed of a welded steel, box-tubing frame and an over-center type clamping device that can compress any valve spring. The compressor arm slides up and down for adjustment and utilizes a locking pin for speed and ease of use. We also offer a base to hold the unit upright in order to use the compressor in conjunction with a mini spring tester. POW351015 POW351005

Pro Model Torque Wrenches We now offer two very high-quality, U.S. made, micrometer-type torque wrenches. The positive spring-loaded locking mechanism prevents accidental setting changes. Our Pro 25-250 ft. lb Torque Wrench also features a 1/2" drive, 45 tooth ratcheting head, designed to work in the tightest spaces. The inch pound version utilizes a 3/8" ratchet and has a range of 25-250 in. lbs. Set the desired torque by rotating the anodized aluminum hand grip, and the wrench will indicate when torque is reached by feel and sound. Our wrenches torque in left or right direction and are accurate throughout their entire range. Both models feature chrome-plated bodies and are furnished in a fitted plastic case. *optional base

Heavy-Duty Manual Compressor Spring Compressor Stand for 351015

$129.00 $74.95

POW256353 POW256351

25-250 ft. lb Torque Wrench 25-250 in. lb Torque Wrench

$135.00 $135.00

Precision Torque Wrench Stud Mount Valve Spring Compressor

A high quality torque wrench is probably the most important tool in the world to anyone who builds engines. We offer a micrometer type, 1/2" drive, ratcheting Torque Wrench that clicks when you’ve reached your desired setting. Our precision-made, imported wrench has a range of 10-150 ft. lbs and comes in a molded plastic storage case. A calibrated 3/8" adapter and extension are also included.

This heavy-duty tool was designed to simplify the task of removing valve springs while the cylinder heads are still on the engine. To use, just thread onto the rocker stud (both 3/8" and 7/16" fulcrums included), place tool feet over the retainer, slide on the handle and pull down to compress the spring. Once the valve locks are removed, simply flip the tool out of the way, and remove the valve spring. This tool works on Small Block & Big Block Chevys, Fords and most engines with stud mount rockers. Compressor feet assembly now cast in place for added rigidity! POW351025

Stud Mount Valve Spring Compressor

POW351570 $84.00

Precision Torque Wrench 10-150 ft. lbs

$39.95

Valve Train Organizers

Shaft Mount Valve Spring Compressor We’re sure you know what a chore it can be to try to remove high pressure valve springs while the cylinder heads are still on the engine, especially when you run a shaft mounted rocker system. Finally, there’s a quality-built, heavy-duty spring compressor available to meet your needs. Our tool is easy to use; simply bolt the tool shaft in place of your rocker shaft, place tool feet over the retainer, slide on the handle and pull down to compress the spring. Once the valve locks are removed, simply flip the tool out of the way and remove valve spring. Reassembly works just as easily.

Our Valve Train Organizer trays are perfect for novice or pro engine builders alike. These durable polymer trays neatly store your valve train components while assembling or rebuilding your engine. The Valve Train Organizers are labeled, front and rear, to help keep track of your part location for reassembly. Each tray has built-in handles to make easy work of moving parts around your shop or garage. The #POW735002 is designed to hold rocker arm and related components and the #POW735001 holds valve springs and related components.

Price

POW735001 POW735002

3.495"

$69.00

Rethreader Die Set

BB Chevy

1.650"

$69.00

POW351037

SB Mopar (318-360, W2 & 3.3 V6)

4.450"

$69.00

POW351038

BB Mopar (383-440 & B1 Heads)

4.825"

$69.00

POW351035

BB Mopar (w/Jesel Shaft)

3.495"

$69.00

Our nut type Rethreader Hex Dies are just what is needed for cleaning and restoring threads in tight places. Made of the finest heat-treated steel, our 10 piece kit includes sizes 1/4", 5/16", 3/8", 7/16" and 1/2" in both coarse and fine thread. All sizes are individually marked for ease of use.

POW351039

Pivot Shaft For Dart 2.150" & BigChief Heads (use w/ BBC tool) 2.600"

Part #

Description

POW351035

SB & 90° V6 Chevy

POW351036

20

800-872-7223

Center to Center

POW351685 $34.00

Valve Spring Tray Rocker Arm Tray

10 Piece Rethreader Die Set - N.C. and N.F.

$29.95 ea $29.95 ea

$9.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Small Engine Valve Spring Compressor

Mini Spring Testers

Always on the lookout for great new tools, we came up with this heavy-duty Small Engine Valve Spring Compressor. Forget the headache of trying to use screwdrivers to pry up the retainers in order to remove the valves. Designed to work on Briggs & Stratton and similar engines.

If you don’t have the big bucks for a bench top spring tester or just need something more portable, this is the one to get. Our Hydraulic Mini Spring Testers are available in several ranges/increments and have a recalibration feature. The handy hex design body can be placed in a vise, used with an arbor press, or with the addition of a flange, used in a drill press.

POW351018

Small Engine Valve Spring Compressor

$78.19

Digital Electronic Spring Tester Our Digital Electronic Spring Tester brings the latest electronic load cell technology to your workbench. This highly accurate, reliable and repeatable tester can check springs up to 2" in diameter and 4" in height. Accuracy is held to +/- .25% throughout the units’ 0 - 1000 lb range, and incredibly, the readout is in 1/10 lb increments. Probably the best feature of our tester is the digital travel and height readout, as this really simplifies setting up valve springs. The unique crankwheel handle allows ultra precise setting and “hands-off” reading. 9 volt battery operation makes this tool truly portable and very easy to take along to the races. POW352000

Digital Electronic Spring Tester

$749.95

Rimac Spring Testers

0-125 lb x 1 lb Spring Tester 0-250 lb x 1 lb Spring Tester 0-350 lb x 1 lb Spring Tester 0-500 lb x 2 lb Spring Tester 0-1000 lb x 5 lb Spring Tester Calibrated Test Spring

0-100 lb x 2 lb Spring Tester 0-300 lb x 5 lb Spring Tester 0-600 lb x 10 lb Spring Tester 0-1000 lb x 20 lb Spring Tester Drill Press Flange Calibration Spring

$79.00 $79.00 $79.00 $83.95 $8.95 $19.50

On Head Valve Spring Pressure Tester A great way to check spring pressure on an assembled engine, this billet aluminum tool fits onto your rocker arm for quick pressure checks. It is adjustable for use with almost any rocker length and measures pressures up to 600 lbs. POW351047

Rimac set the standard back in 1929 when they introduced this unit, and they’re still the industry leader today. These bench top hydraulic testers are a sure way to check spring height versus spring pressure, and we stock all the sizes/ranges available. All models will handle springs up to 2" diameter and 4 1/2" free length, so they’re useful for much more than just checking valve, transmission and clutch springs. We highly recommend the purchase of the test spring, as you will be able to test and recalibrate your unit in the field. POW360071 POW360067 POW360068 POW360069 POW360070 POW360095

POW351050 POW351055 POW351060 POW351065 POW351070 POW360095

Adjustable Spring Pressure Tester

$219.95

Adjustable Valve Spring Remover Made from billet aluminum, this spring compressor is fully adjustable for different valve angles. Its heavy-duty construction allows it to be used on even the heaviest of spring pressures. The screw mechanism maintains its position to easily remove or install the valve locks without fighting against the spring pressure.

$649.95 $649.95 $649.95 $649.95 $649.95 $19.50

POW351054 POW351052 POW351058 POW351061 POW351059

SBC LS1/LS6 SBC w/ Jesel or T&D Rockers BBC w/ Jesel or T&D Rockers* Stud Mount – All 7/16" Stud Spring Remover Kit for Big Chief Heads

$189.95 $189.95 $189.95 $189.95 $311.05

*Also fits splayed or canted valve SBC and V6, SB2 w/ Jesel or T&D rockers and small block Ford w/ Jesel or T&D rockers.

Indicator Bracket for Rimac Spring Tester

Rimac Digital Spring Testers

Here’s a great tool to help make your life easier when using a Rimac Spring Tester. The bracket mounts to the spring tester shaft and allows you to install a dial indicator (not included) to measure spring height to .001". This is much easier than trying to read the steel rule scale that comes mounted to the spring tester from the factory. Our kit also includes a 1 1/2" standard and a 2" dial indicator extension tip.

Rimac has produced the industry standard for spring testers for many years. Now we offer the accurate and reliable Rimac Spring Tester in a high-tech, digital format. It features a backlit LCD window that displays both force in .1 increments and height in .01 increments. Other useful functions included are last reading memory, pass – fail settings and a 0 to 1200 lb range. The rugged cast aluminum housing has a drilled base plate for bench mounting. Uses one 9V battery (included).

POW351530 POW151100

Dial Indicator Bracket Optional 0-1" .001" Dial Indicator

800-872-7223

$29.00 $29.95

POW360075

Digital 1200 lb Spring Tester

w w w. p o w e r h o u s e p r o d u c t s . c o m

$849.95

21


TOOLS YOU NEED!

Deluxe Porting Kit

Cartridge Roll Assortment

This is a good, general purpose porting kit for metal removal and finishing on cast iron cylinder heads. This kit contains an assortment of cartridge rolls, flap wheels, rotary stones, cross buffs and mandrels. This kit will make it possible to smooth intake & exhaust runners as well as gasket match your heads and intake.

This kit provides a very complete selection of straight cartridge rolls in various grits and sizes. This is perfect for those who are continually working on projects requiring cartridge rolls. The kit includes 90 rolls and 2 mandrels packed into a handy storage case.

POW351700

POW351705

Deluxe Head Porting Kit

$49.95

Cartridge Rolls

POW351476 POW351480 POW351485 POW351490 POW351495 $18.00 ea. $13.50 ea. $10.80 ea.

POW351750 POW351755 POW351760 POW351765 POW351770 $24.00 ea. $18.00 ea. $14.40 ea.

POW351780 POW351785 POW351790 POW351795 POW351800 $28.00 ea. $21.00 ea. $16.80 ea.

Cartridge Roll & Mandrel Assortment

POW351475

SHAPE & SIZE CHART Straight Straight Straight Full Taper Full Taper 1/4" x 1 1/2" 3/8" x 1 1/2" 1/2" x 1 1/2" 3/8" x 1 1/2" 1/2" x 1 1/2" POW351720 POW351725 POW351730 POW351735 POW351740 $17.00 ea. $12.75 ea. $10.20 ea.

$29.95

We’ve expanded our Cartridge Roll & Mandrel Assortment to a whopping 49 pieces. This is a great general purpose assortment to have around the shop because it offers a little bit of everything. Our kit now includes 42 cartridge rolls in various shapes, sizes and grits, 3 rotary stones, 2 mandrels, and 2 flap wheels. Each item stores in its own compartment in the handy storage box.

Also known as tootsie rolls, but not nearly as tasty, these are the good, resin bond, aluminum oxide Cartridge Rolls you need to finish sand any port and polish work. We now stock any size you could possibly want or need and in any grit, too. In response to some of your requests, we are also offering quantity pricing on all of our rolls. All rolls are designed to be used with 1/4" mandrels, like the ones that we offer elsewhere in this catalog. Consult the chart below for sizes, shapes, grits, quantities, part numbers and prices. Sold in packs of 50.

Grit 40 60 80 100 120 1-Pack 3-Packs 5-Packs

Cartridge Roll Assortment

POW351810 POW351815 POW351820 POW351825 POW351830 $31.00 ea. $23.35 ea. $18.60 ea.

QUANTITY PRICING Buy 3 packs of any one part number & receive a 25% discount or buy 5 packs of any one part number and get an extra 40% off.

Cartridge Roll & Mandrel Assortment

$39.95

Makita Electric Die Grinder This professional Makita Electric Die Grinder will allow you to have great control of your work while porting, polishing or performing any grinding operation. The 11" length lets you support the tool with one hand while you guide the tip with the other. This heavy-duty, 2 amp grinder features a 1/4" collet, ball bearing construction and a top speed of 25,000 rpm. This lightweight (only 2 lbs) tool is the choice of many of the top cylinder head porters around the country. POW351550

Makita Professional Die Grinder

$189.00

Engine Storage Stand Cross Buffs Once you’ve used our Cross Buffs, you’ll wonder how you ever managed without them. Available in medium or very fine grade, they’re perfect for finish polishing intake and exhaust ports, as well as carburetor venturis. You can also use these to polish the inside of lifter bores, valve bodies and brake cylinders. We stock packs of 10 in both 1" 2-ply and 1 1/2" 3-ply configurations. The mandrels listed below should be purchased with our Cross Buffs. POW351900 POW351902 POW351903 POW351905 POW351910 POW351915 POW351920

1" Medium Cross Buffs - 10 Pack 3/4” Medium Cross Buffs - 10 Pack 3/4” Fine Cross Buffs - 10 Pack 1" Very Fine Cross Buffs - 10 Pack 1 1/2" Medium Cross Buffs - 10 Pack 1 1/2" Very Fine Cross Buffs - 10 Pack Cross Buff Mandrel (w/ 3 inserts)

22

800-872-7223

$9.95 $9.95 $9.95 $9.95 $19.95 $19.95 $4.95

Powerhouse® Engine Storage Stands come in three engine-specific sizes to fit small and big-block Chevrolet, Ford small-block and Chrysler small-block engines. Each features easy-to-attach adjustable mounting arms to ensure the remains upright in the cradle. Powerhouse® Products high-quality, finely crafted steel Engine Storage Stands make moving engines around the shop easy, far better than other flimsy engine cradles which often collapse when moved POW102130 POW102131 POW102132

SB Chevy & BB Chevy SB Ford SB Chrysler

$41.25 $43.75 $52.50

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE

Thread Restorer Tap Sets

Peg-Style Head Holders

It’s imperative to have clean and straight threads to achieve proper torque when rebuilding an engine. Our high-quality tap sets will restore and clean bolt holes in blocks, heads, components, etc., without undercutting. We offer sets in both N.C. and N.F. thread types, and all sizes are stamped for ease of identification. Both of our six piece sets are packed in a plastic pouch and include sizes 1/4", 5/16", 3/8", 7/16", 1/2" and 9/16".

Our Peg-Style Head Holders are a great, low cost way to suspend your cylinder heads above your workbench when performing port and polish work. The tapered pins slide into the cylinder head bolt holes so you can hold the head rightside up or upside down.

POW351675 POW351680

Thread Restorer Set - Coarse Thread Thread Restorer Set - Fine Thread

$9.95 $9.95

Porting Mandrels

How many times have you wished you just had an extra inch to do the job right? Well, we offer our Porting Mandrels up to 8" long, which are guaranteed straight and sure to please anyone. Our mandrels are all 1/4" diameter with a 1" long x 1/8" wide tip, which will work with all of our (and most other) cartridge rolls. POW351501 POW351504 POW351506 POW351508 POW351510

1" Porting Mandrel 4" Porting Mandrel 6" Porting Mandrel 8" Porting Mandrel 3 pc Kit - 1",4" & 8"

$ 2.50 $ 8.00 $ 9.00 $10.00 $19.00

POW351410

Peg-Style Head Holders (pr.)

$26.95

Convolute Wheels These closed-weave nylon wheels are designed for light deburring work while providing a fine surface finish. We stock medium density, silicon carbide, fine grade wheels only. This is the desired wheel for deburring pistons, bearings, valves and valve springs. The wheels measure 6" x 1" x 1" and include a universal adapter to allow them to work with any size bench grinder shaft. POW351930

6” Fine Convolute Wheel

$47.95 ea.

Carbide Burr & Stone Kit

V-Style Head Holders You’ll need our V-Style Head Holders whenever you perform any type of cylinder head modifications or maintenance, like disassembly or porting work. The best thing about our head stands is the ability to put the head in any position and rotate as necessary. Two versions are available, cast aluminum and welded steel. Our V-Style supports also come in handy for holding camshafts and crankshafts. POW351400 V-Style Aluminum Head Holders (pr.) $94.00 POW351405 V-Style Steel Head Holders (pr.) $36.00

A perfect complement to any of our Port & Polish Kits, our Carbide Burr & Stone Kit provides a 3/8" diameter by 4" long oval-shaped carbide burr, 2 long and 2 short aluminum oxide mounted stones. This kit gives you the basic tools you will need to start any porting job. Our medium grit, long-lasting abrasive stones are also available separately. POW351465 Al. Oxide Mounted Stone - 2" Shank $1.95 ea. POW351466 Al. Oxide Mounted Stone - 4" Shank $2.75 ea. POW353604 Carbide Bur - 3/8" Oval Shape - 4" Shank $25.00

Solid Carbide Burrs Our Solid Carbide Burrs, also called rotary files, are simply the best available. We stock a variety of different sizes, shapes, cuts and lengths, so we will always have the exact tool that you need for any particular porting or metal removal job. All of our burrs utilize a precise, straight, 1/4" shank in either a 2" or 6" length. Double cut burrs are general purpose and will make a small controllable cut that is suitable for cast iron or aluminum. Our aluminum cut burrs are for soft, nonferrous metals or non-metals and are great for removing large amounts of material very quickly. Our burr kits combine our most popular part numbers, a burr stand and considerable savings. Consult the chart below for sizes, shapes, cuts, part numbers and pricing. Tip: Use double cut burrs for all finish grinding, and continually spray the tip with silicone spray lube to prevent load-up when working with aluminum.

Head Diameter & Shape 1/2” Cylinder w/ Radius 1/2” Round Tree 1/2” Oval 1/2” Flame 3/8” Pointed Tree 3/8” Oval 3/8” Ball Burr Kit*

Double Cut 2” Shank Price POW355302 $20 POW355402 $20 POW355602 $20 POW355802 $25 POW353502 $15 POW353602 $15 POW353702 $15 POW355900 $70 4-piece kit

Double Cut 6” Shank Price POW355306 $30 POW355406 $30 POW355606 $30 POW355806 $35 POW353506 $25 POW353606 $25 POW353706 $25 POW355905 $102 4-piece kit

Aluminum Cut 2” Shank Price POW355352 $30 POW355452 $30 POW355652 $30 POW355852 $35 POW353552 $25 POW353652 $25 POW353752 $25 POW355910 $72 3-piece kit

Aluminum Cut 6” Shank Price POW355356 $35 POW355456 $35 POW355656 $35 POW355856 $40 POW353556 $30 POW353656 $30 POW353756 $30 POW355915 $85 3-piece kit

* Includes Highlighted Burrs and Holder

800-872-7223

w w w. p o w e r h o u s e p r o d u c t s . c o m

23


TOOLS YOU NEED!

Electric Ring Filer

No more fumbling with hand crank ring grinders; it's time to step up your engine building to today's technology. Our Electric Ring Filer will virtually pay for itself with the time you will save on file fitting rings. It has a rechargeable, Ni-Cad battery that can provide convenient, portable filing for up to 200 rings when fully charged. This easy-to-use filer features a depth adjustment mic for .001" cutting increments and an auto on/off feature for safety. The filer stores away neatly in a padded plastic case and also includes extra grinding wheels, AC adapter and necessary wrenches. POW105040

Electric Ring Filer

$469.95

Jewelers Eye Loupe

Originally used by jewelers and toolmakers, the 1" diameter lens on our Jewelers Eye Loupe provides 5 power magnification. This tool is handy for reading spark plugs or inspecting small parts. Comes complete with storage pouch. POW301085

Jewelers Eye Loupe

$6.95

Pro Spark Plug Viewer

For reading spark plugs or close up inspection of parts, this is the tool to have. The hooded design of our Pro Spark Plug Viewer is perfect for viewing plugs, and the 10X power magnification is aided by the light that shines directly on the item being inspected. Yes, this is the same one you see the pros on TV use to tune their engines. Powered by two “C” batteries (not included). POW301080

Pro Spark Plug Viewer

$41.25

F I B E R S C O P E S Flexible Fiberscope Kit

Our Fiber Optic Borescopes allow you to check for thousands of mechanical problems without major disassembly!

Our most popular borescope. This kit features a large viewing area and a bright light source. This scope is the best choice for general purpose mechanical use because of its great clarity, adjustable focal distance and 12 volt operation. Designed to be viewed through the handle, video hookup is not necessary but is available as an option. Kit Includes: • 5/16" (8mm) diameter by 27" long flexible scope shaft • Bright 75 watt halogen light source • Stainless steel gooseneck sheathing around shaft and light guide • Eyepiece with built-in focus ring • 12 volt battery clips • 90° side view tip (except articulated model) • Foam padded, plastic carry case POW122000

Complete Flexible Fiberscope Kit

$1295.00

System Specifications Size (body) . . . . . . . . . . . . . . . . . . . . . . .2" dia by 10" long Body construction . . . .Black Powder Coated Aluminum Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2lb. Power supply . . . . . . . . . . . . . . . . . . . . . . . . . .12 volt DC Lamp type . . . . . . . . . . . . . . . . . . . . . . . .75 watt halogen Lamp life rating . . . . . . . . . . . . . . . . . . . . . . . . .50 hours Working diameter . . . . . . . . . . . . . . . . . . .0.3125" (8mm) Working length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26” Total length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37” Working distance . . . . . . . . . . . . . . . . . . . .0.2" to infinity Bend radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.25" Field of view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55° Eye piece . . . . . . . . . . . . . . . . . . . . . . . .standard “B” style

24

800-872-7223

Just imagine how much time, energy and money you could save if you had X-ray vision and could look inside an engine to see what’s wrong. Well, we’ve got the next best thing this side of the planet Krypton. All of our Fiber Optic Borescopes are derived from stateof-the-art medical technology but built to withstand the rigors of industrial use. Any of our scopes will show a bright, clear, color image with remarkable detail, and all are compatible with gasoline and other fluids. Whatever your needs, Powerhouse® Products has a borescope to help you get the job done. • • • • • • • • • • • • •

Check piston tops for signs of detonation Inspect cylinder walls for cracks or wear Look for cracked or burned valves Observe fuel injectors or carburetors in use Check match-up of cylinder head to intake ports Locate foreign objects or restrictions Check lines, hoses & tubing for blockages or leaks Thoroughly inspect transmission components Look inside radiators for corrosion or blockage Check ring and pinion gears in differential Locate problems inside gas tanks or fuel cells Examine under dashes and hard-to-reach areas Thousands of other uses

Articulated Fiberscope Kit We also offer the Articulated Fiberscope (#POW122100), which is the same as the flexible fiberscope except it features a bendable end. A small lever on the eyepiece handle “steers” the tip of the scope in two directions up to a 120° angle. This feature makes it easy to “look around” once you get the scope into position. POW122100

Fiberscope Kit with Articulated Tip

POW122125

A/C Adapter

$2295.00 $125.99

(used to power light source from any 110 volt outlet)

POW122155

Replacement 100 Watt Bulb

$29.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE

E-Z Valve Lash Wrenches

Power Valve Tool

Our E-Z Valve Lash Wrenches make things simple when adjusting valves. You no longer need three hands to get the job done; you just need the right tool. These high-quality wrenches are constructed of 17-4 stainless steel, then heat-treated and electropolished to a satin finish. The included T-handles are fitted to the wrench for smooth operation. We offer wrench/T-handle sets for most poly-lock and set screw combinations.

It’s very difficult to remove or install the power valve in a Holley carburetor without resting a tool on the metering block, causing scratches and burrs. Our new Power Valve Tool is broached and clearanced to rest on the power valve, not on the metering block, so there’s no fear of marring. This CNC machined aluminum tool will make it easy to install or remove power valves the right way.

POW301550 POW301555 POW301560 POW301565 POW301570 POW301575 POW301580 POW301586 POW301587 POW301588

9/16" Wrench with 3/16” and 7/32" T-handles 5/8” Wrench with 3/16"and 7/32" T-handles 7/16" Wrench with a 1/8" T-handle (Jesel rockers) 1/2” Wrench with a 3/16" T-handle (T&D rockers) 9/16” Wrench with 1/8” T-handle (Chrys. Hemi) 7/16” Wrench with 3/16” T-handle (Chrys. Hemi) 1/2” Wrench with 1/8” T-handle Replacement 1/8” T-handle Replacement 3/16” T-handle Replacement 7/32” T-handle

POW301240

$37.95

$37.95 $37.95 $37.95 $37.95 $37.95 $5.95 $5.95 $5.95

$21.50

Bolt Hole Elongating Tool

Bolt Hole Elongating Tool

How many times have you been working on an engine and needed someone to sit inside the car and bump the starter over, or worse yet, been showered with sparks when you used a screwdriver across the starter solenoid? Well, with our push-button Remote Starter Switch you can turn the engine over from under the hood, all by yourself. Just think how handy this will be the next time you adjust your valves. POW301220

$14.95

Powerhouse® Shock Dyno

Call for pricing

Transmission Tailshaft Plugs If you own one of our Transmission Tailshaft Plugs, you won’t need to drain the transmission fluid when removing the driveshaft. You no longer have to buy different plugs for every type of transmission; the tapered design of our double ended tool makes this one truly universal. Just plug this into the tailshaft housing, and the fluid stays where it belongs. $44.95 POW301230

800-872-7223

Remote Starter Switch

One way the fast guys get the most from their suspension and handling is by accurately knowing their shocks rating and performance. Powerhouse® Products has a new Shock Dyno that is actuated by air pressure. In as little as five minutes, you can obtain accurate readings of rate, compression and rebound. This is critical, as many shocks vary from their original designation, especially when considering changes in temperature. POW122510

This handy tool is for both professional engine builders, as well as the amateur. It is used to elongate the intake bolt holes on a Small Block Chevy intake manifold. These bolt holes are often misaligned due to block or cylinder head milling and need to be corrected for proper intake installation. This affordable tool is made from durable heattreated steel and clamps securely in place, locating off the existing bolt hole. Using a 7/16” drill bit and a hand drill, the tool guides the drill and elongates the holes in the manifold. POW351306

Remote Starter Switch

Shock Dyno

This CNC machined billet aluminum 5/16" driver tool is perfect for installing or removing MaxJet™ carburetor jets or float bowl screws. It even has a Holley jet tool built into the end of the handle. MaxJet™ and Float Bowl Tool

$26.00

$37.95

MaxJet™ and Float Bowl Tool

POW301250

Power Valve Remover/Installer Tool

Universal Transmission Tailshaft Plug

w w w. p o w e r h o u s e p r o d u c t s . c o m

$5.95

25


TOOLS YOU NEED!

COMP Cams® Pro Series Lifter Bore Grooving Tool

Spark Plug Indexer

Developed by one of the top NASCAR® Winston Cup engine builders, this innovative new tool precisely grooves the lifter bore to ensure that pressure fed oil is directly injected into the contact area between the lifter and camshaft. This increased oiling significantly reduces wear on the camshaft and lifter and decreases risk of premarure failure during breakin. This machining operation to the block is quick, easy, inexpensive and is the best insurance for a new camshaft. The replaceable carbide cutters are also available seperately. Note: The engine must be disassemled to use this tool. Cut groove to .009 to .012

The top engine builders all know that to wring every ounce of power out of an engine, little things like positioning the spark plug electrode become important. This is also critical in an engine with domed pistons because the piston can close the plug gap if not positioned properly. Because you set up our Spark Plug Indexer to match your cylinder heads, you can position your plugs in the tool exactly how you will want them in any particular cylinder. The movable bushings in our indexer plate allow you to set it up for any set of cylinder heads. You can fit plugs to a particular cylinder or use index washers to tweak the plugs into position. This tool really speeds up the plug indexing process. POW301055

POW351026 POW351131

Chevrolet .842" Diameter Replacement Cutter

Spark Plug Indexer Board

$49.95

$134.95 $29.95

Spark Plug Indexing Kit Magnetic Angle Finders Our Magnetic Angle Finder features an easy-to-read large diameter face and a magnetic base. This tool is perfect for setting up machinery and suspensions, checking pinion and spoiler angles, etc. Our pro model is accurate to 1/2°. POW301375

Pro Model Magnetic Protractor - 1/2°

$25.00

Spark Plug Indexing Washers These are used by many racers to properly index their spark plugs in the combustion chamber for piston dome clearance or for added power. Our Spark Plug Indexing Washers come 30 to a pack, 10 each in a different thickness and are available for 14mm flat seat or 14mm taper seat plugs. These washers are a great addition to our indexer kit. POW301090 POW301095

14mm Flat Seat Index Washers (10 each of .043",.054" and .064") 14mm Tapered Seat Index Washers (10 each of .010",.021" and .032")

$14.00 $14.00

Pro Engine Cleaning Kit

Great for keeping your plugs and tools protected and organized. Our Spark Plug Indexing Kit consists of our spark plug indexer board, a plug gapping tool, an illuminated magnifier and a fitted plastic case that holds all the tools, plus 16 spark plugs. This is a great system for indexing your plugs before you get to the track. All items are also available separately. POW301075 POW301055 POW301060 POW301065 POW301070

Complete Spark Plug Indexing Kit Spark Plug Indexer Board Fitted Spark Plug Case (holds 16) Illuminated 4X Magnifier Spark Plug Gapping Tool

Spark Plug Sockets These header sockets are extremely high-quality professional tools that can make your life much easier. Fully CNC machined from 15-5 Stainless Steel Aircraft Alloy and properly heattreated, these ingenious sockets will sneak into virtually any cylinder head / exhaust header combination. The internal hex is EDM'd, which means it is electronically cut and built to give a lifetime of use. POW301150 POW301155

5/8” Spark Plug Socket 13/16” Spark Plug Socket

Cleaning your block has just become easier than ever. This six-piece professional engine builder’s brush kit will have your engine ready to build in no time. The kit includes an extra large bore brush, a heavy-duty oil galley brush, cam and lifter bore brushes with long handles, a bolt hole brush and a nylon surface brush. Also included is 1 quart of specially designed, concentrated cleaner for removal of tough grime, grease and oil. The cleaner will not harm bearings or leave residue.

Leakdown Tester

POW351307 Pro Engine Cleaning Kit

POW301018

26

800-872-7223

$29.95

$59.00 $49.95 $8.95 $6.95 $1.95

$44.95 $49.95

Racers prefer the dual gauge design of our Leakdown Tester to check for problems with piston rings, valves, head gaskets, etc. The left hand gauge shows incoming air pressure, while the right hand gauge (once plugged into the cylinder being checked) shows how much air the cylinder is holding. The difference between the two gauges is your leakdown. A universal 14mm spark plug adapter, high-quality regulator and complete instructions are all standard with our precision Leakdown Tester. Dual Gauge Leakdown Tester

$119.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE

Compression Tester

Mechanic’s Gloves and Sleeves

Check the condition of your engine with our high performance 0-300psi Compression Tester. Our unit features a 16" heavy-duty, long reach flex hose, side release valve (for multiple readings), 14mm, 14mm long and 18mm spark plug adapters. Our large 2 1/2", easy-to-read gauge is graduated in both pounds and kilograms.

Protect your hands and arms from heat, cuts and abrasions. Made of 100% ballistic kevlar, our Mechanic’s Gloves and Sleeves offer protection with dexterity and comfort. These are an absolute must for anybody who works around cars or equipment.

POW301050 POW301051 POW301052

0-300psi Long Reach Compression Tester Optional 10mm Adapter Optional 12mm Adapter

$19.95 $5.95 $5.95

POW301100 POW301110

Kevlar Mechanic’s Gloves (pair) Kevlar Mechanic’s Sleeves (pair)

Pit/Shop Apron

Powerhouse® T-Shirts

Our handy Pit/Shop Apron is rugged and durable and features two large pockets in front and a smaller pocket on the upper left chest for pens. So keep those expensive crew uniforms clean; wear one of our aprons.

Powerhouses® carries 100% cotton t-shirts that have a full color Powerhouse® logo on the back and a smaller logo on the chest. They are the perfect t-shirt to wear at the track. The shirts are available in S thru XXXL.

POW952300

Powerhouse® Pit/Shop Apron

$15.95

P106-size

Powerhouse® T-shirt

$10.95 $19.95

$12.95

C O AT I N G S / L U B R I C A N T S Thermal Barrier Coatings for Internal Engine Parts

Dry Film Lubricants

These are the Ceramic Metallic Barrier Coatings that everyone uses on their piston tops and combustion chambers. The layer of thermal protection that these coatings provides actually “moves” heat and reduces detonation. The reduced component temperatures will increase thermal efficiency, extend 350 part life and produce more usable power. Once the coating is polished, the highly reflective surface further enhances flame travel. Our Powerkote is for aluminum heads and pistons, stainless, inconel and titanium valves, and cast iron heads and stock valves. One 3 oz. bottle should do 3 sets of pistons. Can be used on Ferrous and NonFerrous metals. PTL852213

3 oz. Powerkote Ferrous / Non-Ferrous (water base)

$29.95

WSX Lubricant

PTL852107

WSX Lubricant is a highly modified form of tungsten disulfide (WS2) powder. It is specifically designed to be used in areas where it is not practical to spray on liquid coatings. WSX bonds through friction, so simply buff powder onto a clean, etched surface. The coating will form a high pressure film of lubricant 20 millionths of an inch thick, which will reduce friction and improve ring seal in the cylinders. This product is perfect for cylinder walls, lifter bores, valve guides, roller bearings, etc. 1/2 oz. is enough to do eight cylinder walls. PTL853401 1 oz. WSX Powder Lubricant

800-872-7223

These high-pressure, molybdenum disulfide based lubricants are thermally bonded to parts to help prevent scuffing and galling, and since they reduce friction, they free up more usable power. Dyno tests have shown gains of 10 to 40 horsepower, just by coating internal engine parts. For years, “moly” has been the lubricant of choice for aerospace and the military. Now, it’s available to you for your piston skirts, bearings, valve springs, camshaft, timing chain or any part that is subject to friction. This coating also aids in the movement of heat more evenly over a part and away from it. This characteristic is especially beneficial on valve springs, extending the life of the springs beyond that achieved through polymer coatings used in the past. Our Dry Film Lubricants can also make the difference between “saving” a part or experiencing damage due to oil film failure. One 7 oz. bottle covers the major parts of one engine. Note: Solvent based lubricants should not be cured in ovens used for food preparation.

$23.95

7 oz. DFL-1 Dry Film Lubricant (water base)

$29.95

150

PTL853032

1 qt. TLML Dry Film Lubricant (solvent base)

$74.95

300

w w w. p o w e r h o u s e p r o d u c t s . c o m

27


TOOLS YOU NEED! Coat it Yourself and Save! Aerospace coatings for engine parts used to be a well kept secret, something only the pro racing teams knew about and used. Powerhouse® Products has teamed up with industry pioneer Leonard Warren to offer a line of products designed specifically for motorsports applications. Advances in technology have made these products more user friendly and have allowed us to offer these coatings as “do it yourself” formulations. We stock a wide variety of Thermal Barrier Coatings, Dry Film Lubricants and Assembly Lubricants to meet your needs. It is important to note that coatings will not only increase your engine’s power output by reducing friction, increasing combustion chamber efficiency, reducing air inlet temperature, increasing exhaust gas velocity, etc., but will also allow you to add power by making adjustments in clearances, jetting, timing, etc.

spray on with airbrush or touch-up gun

oven bake at temperature shown

1) All parts should be sandblasted at low pressure (40psi) using fine sand (120 grit aluminum oxide). Do not use glass bead. 2) Parts should be degreased using acetone, lacquer thinner, M.E.K., or other non-petroleum based solvent that will not leave a residue. 3) Coatings should be applied with an airbrush or a low pressure touchup paint gun. 4) For oven cured parts, it is fine to use any toaster oven or kitchen oven except for solvent based coatings. Solvent based coatings should only be cured in ovens not intended for food preparation. 5) All coatings come pre-mixed and ready to use. Complete instructions are included with each product.

Layout Dye

KEY TO SYMBOLS

brush on with a foam brush

Some tips about using our coatings:

air dry-operating temperature of part will cure coating

The use of Blue Layout Dye is the most popular technique for mapping out any type of general purpose machine work that is to be done. Of course, it is also ideal for applying around intake and exhaust ports on heads or manifolds to scribe your gasket location before porting. POW351665

Engine Assembly Oil Our Assembly Oil is specially formulated to provide instant protection of moving parts during engine break-in. It should be generously spread over the bearings, timing chain and distributor gear. This oil should also be used when installing the pistons into the block. Our oil is supplied in plastic bottles with a handy, snap-up, pour spout for easy application. POW801025 POW801030

Assembly Oil - 4 oz. Bottle Assembly Oil - 8 oz. Bottle

$4.95 $6.95

Black Satin Exhaust System Coating Our Black Satin Exhaust System Coating is a ceramic, reinforced formula designed to be an effective, easy-to-apply thermal barrier that reduces radiated heat by 85 to 100%. Black Satin is the most efficient thermal barrier available, and since heat is not held around the part, underhood temperatures are lowered and component life is extended. This product has been tested at base metal temperatures over 2000°F without lifting, cracking or flaking. Our Black Satin or Colorguard Coatings will provide a great appearance with excellent corrosion and oxidation protection. Probably the best feature of these products is that they are simple to use, just spray on and let the exhaust heat cure the coating. Not for use on internal engine parts. Shorty headers require about 4 oz., regular headers need 6 to 8 oz. and big headers will use 10 to 12 oz. PTL851004 PTL851012 PTL851032

28

4 oz. Black Satin Header Coating 12 oz. Black Satin Header Coating 1 qt. Black Satin Header Coating

800-872-7223

$19.95 $49.95 $125.00

Blue Layout Dye - 16 oz. Spray Can

$ 7.95

Ultra-Gel Assembly Lube This is the same lube used by Top Fuel racers to provide maximum anti-scuff and anti-wear protection during an engine’s critical break-in period. An extreme load lubricant, Ultra-Gel is normally applied to rod, main and cam bearings, as well as pistons, valve train components, transmission gears, ring and pinion gears and anywhere high loads are experienced. The superior “clinging” action of this product keeps the parts protected longer because it does not run off or wipe off easily. The completely oil compatible formula assures suspension of the special lubricants which remain with the oil for extended protection. The gel formula will not clog oil filters or passages. PTL851010 PTL851011

3 oz. Ultra-Gel Assembly Lube 8 oz. Ultra-Gel Assembly Lube

$8.95 $19.95

Engine Assembly Lube This is the white, high-pressure grease that you hear about being used by professional engine builders. Since it has a thick paste type consistency, it stays where you put it. This stuff is not only ideal for upper valve train components like rocker arms, it is also great for cams, lifters and distributor gears. You may also want to consider using this high pressure lube if you build an engine that will not be fired shortly after it’s completed. POW801005 POW801010 POW801015

Assembly Lube - 4 oz. Jar Assembly Lube - 8 oz. Jar Assembly Lube - 16 oz. Tube

$4.95 $6.95 $12.00

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE

BOOKS/VIDEO

by Alex Walordy Tips from Chevrolet engineers and engine builders like John Lingenfelter and Earl Gaerte make this book a must have item. Big cubic inch motors, block prep and cylinder head work are only some of the topics covered in this book’s 100 pages and 300 photos.

HP Books / “How To Hot Rod” Series These books show you how to build performance into your engine rebuild project. Covering everything from blueprinting, clearances, torque specs and assembly, to component selection and modification. Cylinder head mods and engine tuning are also explained. Lots of stepby-step photos. POW901100 POW901105 POW901110

How To Hot Rod Small Block Chevys How To Hot Rod Big Block Chevys How To Hot Rod S.B. Mopar Engines

$16.95 $16.95 $16.95

These books are great because they show you all the steps involved in a complete engine rebuild. From stripping down the engine, reconditioning parts, rebuilding to installation, it’s all covered in these books. Sections also cover parts identification, interchange, factory specifications, troubleshooting and tuning. Written in a step-by-step style with lots of photos. How To Rebuild B.B. Chevy Engines How To Rebuild S.B. Ford Engines How To Rebuild B.B. Ford Engines How To Rebuild S.B. Mopar Engines How To Rebuild B.B. Mopar Engines

$16.95 $16.95 $16.95 $16.95 $16.95

Before taking on that next automotive project, you may want to read up on the subject. This handbook series takes the reader from the beginning stages all the way through to the advanced techniques used in the various crafts. One tip learned and the book will easily pay for itself. So, whether you want to be an expert or just be able to do the job yourself, these books are the ticket. Metal Fabricator’s Handbook Sheet Metal Handbook Welder’s Handbook Automotive Electrical Handbook Paint & Body Handbook Automotive Paint Handbook Brake Handbook Mustang Performance Handbook

800-872-7223

Holley Super Tuning Guide

$14.95

by Alex Walordy If you’re into Bracket or ET Racing, or want to be, you need this book. It covers everything from reading the track, testing, tires, practice trees and electronic devices, to fuel and cooling systems. Tips from some of the best in the business make this guide a winner. Ways to Win

$16.95

Engine Super Tuning Guide $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95

by Alex Walordy Great advice from industry experts at COMP Cams®, MSD, Champion, Holley, etc., help you get the most from your engine. Includes guidelines on camshafts, ignition systems, timing, carbs, electronic fuel injection and more. POW901015

Engine Super Tuning Guide

$14.95

Door Slammers: The Chassis Book by Dave Morgan If you are building or racing a full bodied drag car, this book shows you how to maximize chassis performance. Written by industry expert Dave Morgan, it contains a wealth of knowledge not generally available from any other source. Hundreds of photos and drawings help explain and guide you through chassis operation and tuning.

by Ed Staffel This book provides the latest theories, techniques and supplies information on an engine that has been around for thirty years. Author Staffel is a full-time race engine builder specializing in the preparation of high performance Big Block engines. This book will guide you through the do’s and don’ts of engine building. Max Performance Chevy Rat Motors

$16.95

Ways To Win

POW901030

Max Performance Chevy Rat Motors

POW901390

Chevy Engine Assembly Guide

Holley Super Tuning Guide

POW901005

HP Books / “Handbook” Series

POW901145 POW901150 POW901155 POW901160 POW901165 POW901170 POW901175 POW901180

POW901010

by Alex Walordy Alex picked the brains of carb experts like Barry Grant, Chuck Gulledge, Dave Braswell and Chuck Nuytten to compile this guide. It covers the complete fuel system from tank to carb and covers details on jetting, idle circuit, pump shot, etc. This book takes the mystery out of the Holley carburetor.

HP Books / “Rebuild” Series

POW901120 POW901125 POW901130 POW901135 POW901140

Chevy High Performance Engine Assembly Guide

$18.95

POW901020

Door Slammers: The Chassis Book

w w w. p o w e r h o u s e p r o d u c t s . c o m

$29.95

29


TOOLS YOU NEED! “Quick Shifting”

V-Twin Tuner’s Handbook

The latest addition to our Power Series of videos, “Quick Shifting” explains how to modify your GM Turbo 350 transmission. Installing a shift improver kit, installation of a torque converter, and shifter installation are all covered in this 30 minute video. Easy-to-follow instructions explain how to firm up shifting, install a transmission cooler and inspect parts for wear.

by D. William Denish The perfect companion to the Big Twin High Performance Guide, this book will help you maximize your bike’s performance. Learn how to plan your combination, estimate expectations, and tune for maximum results. You’ll find a ton of charts, tables, graphs and formulas covering horsepower, torque, displacement, airflow, gearing, shift points, etc. POW901060

V-Twin Tuner’s Handbook

POW902020

“Quick Shifting” – Turbo 350 Video

Big Twin High Performance Guide

“How to Build a Small Block Chevy”

by D. William Denish This is the most comprehensive high performance manual available for the Harley Davidson Big Twin. A massive 238 pages in size, there are chapters on power theories, combinations, induction and exhaust systems, cams, compression ratios and ignitions. Find out why this fact-filled book is considered the Harley performance “bible”.

This video offers step-by-step instructions, including the basics, on building a performance Small Block Chevy engine. Competition Cams® R&D Director, Paul “Scooter” Brothers, offers advice based on his 20+ years of experience building everything from street engines to 700 horsepower NASCAR power plants. Great for the novice or intermediate engine builder.

POW901055

Big Twin High Performance Guide

$24.95

How to Build & Modify SBC Cylinder Heads

Small Block Chevy Cylinder Heads

$18.95

by Larry Atherton This step-by-step “workbench” book shows you how to build a street or racing Small Block Chevy engine in your own garage. It includes hundreds of clear photos and easy-to-read text explaining every procedure a professional engine builder uses. Takes you from disassembly and parts inspection to initial startup and break-in. How to Build the Small Block Chevrolet

$18.95

30

800-872-7223

$24.95

Holley Performance Rebuild Video Quadra Jet Performance Rebuild Video

$24.95 $24.95

“How to Use Our Pinion Depth Setting Tool” Narrated by Adrian Pendegrass, this video explains in detail how to set up a differential using our (#POW356000) pinion depth setter. While Adrian will never win an academy award, he does pass along a great deal of knowledge about various rear end assemblies and buildup techniques. Gear nomenclature, gearset applications, patterns and torque specifications are all covered in this 1 1/2 hour video. Pinion Depth Setting Video

$39.95

“Power Porting” Tools, equipment, and safety are all covered in this step-by-step, 20 minute video. Cylinder head porting theory, as well as gasket matching, bowl blending and chamber polishing are also detailed. Many porting tips and tricks are also explained.

This video, narrated by Paul “Scooter” Brothers, COMP Cams® R&D Director, leads you through camshaft installation and degreeing with expertise. Attention to detail and some tricks of the trade make this video a winner. Even a seasoned pro is sure to learn something from this 35 minute tape. Cam Degree Video

POW902025 POW902030

POW902070

“The Proper Procedure to Install and Degree a Camshaft“

POW902000

Small Block Chevy Video

We now have two carburetor rebuild and tuning videos; one for Holleys® and one for Quadra Jets. The videos cover carb theory, rebuilding, calibrating and tuning in simple “over the shoulder” type instruction. Every detail and part is thoroughly discussed and explained in these 30 minute videos.

How to Build The Small Block Chevrolet

POW901320

POW902010

“Performance Four Barrel”

by David Vizard Probably the most complete book on Small Block Chevy V8 cylinder heads, it includes theory, head selection, part numbers and step-by-step instructions on head modifications. Over 350 photos, blueprints and charts are included. POW901025

$24.95

$19.99

$24.95

POW902016

“Power Porting” Video

$19.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE

S O F T WA R E DeskTop Dyno™

DynoSim™ Advanced ProTools™

The DeskTop Dyno is a powerful engine simulation that offers extended component testing and amazing accuracy. Use simple Direct-Click™ menus to select from a wide variety of parts, or enter your own custom specs. Instantly displays horsepower, torque, VE, and other engine performance data on customizable graphs and tables to within 5% of real dyno data.The DeskTop Dyno, “big brother” of Dyno Basic, offers more speed, more engine components, and improved accuracy. Designed for the serious engine enthusiast, the DeskTop Dyno simulation package will evaluate custom cylinder heads, any cam timing, a wide range of bores and strokes, valve sizes, even connecting rod-length and angularity. Also test forced-induction systems, including turbos, roots, and centrifugal blowers. Plus you can use an advanced compression-ratio calculator, cam-math QuickCalculator®, and even print multi-page dyno-test reports! If you want the most from your next engine buildup, use the DeskTop Dyno engine-dyno simulation and turn your Windows-equipped PC into the ultimate engine building tool.

DynoSim™ is a powerful, accurate, state-of-the-art engine simulation for performance enthusiasts and racing professionals. This advanced software application incorporates the latest simulation technology that accurately models a virtually unlimited range of component combinations. The DynoSim™ incorporates a custom interface designed for Windows 95/98/Me/2000/XP. Change components by simply clicking on any part, power and torque curves are instantly updated. Mix, match, and change any components and instantly view the results. Model a wide variety of naturally-aspirated and forced-air induction systems. Naturally-aspirated models include various manifold configurations, including the latest high-flow designs for carburetors or injection. DynoSim™ includes a powerful new testing technique that “homes in” on the best parts combinations, automatically!

POW102320

DeskTop Dyno™

POW102300

DynoSim™ Advanced ProTools™

$209.95

$74.95

DragSim™ Advanced ProTools™ Now, for the first time in racing history, there is a new way to find the right setup for any vehicle on any closed-course asphalt track. FastLapSim™ lets anyone with a PC accurately simulate vehicle components, try unique combinations, and test the entire vehicle on any closed-course without twisting a single wrench. FastLapSim™ incorporates a custom interface designed for Windows 95/98/Me/2000/XP. Change components by simply clicking on any part˜vehicle “telemetry” curves and GG-diagrams are recalculated and updated. Display lateral and longitudinal acceleration, vehicle speed, yaw, pitch, roll, or any of the 65+ telemetry streams recorded during each lap test. Over 40 road courses are supplied with FastLapSim™, including many of the World’s best-known race courses. In addition, you can model any track or autocross circuit you can dream-up using the built-in, fullygraphic Track Editor™!

Find the best racing setup for automobiles, dragsters, or motorcycles in the 1/4-mile, 1/8-mile or other straight-line racing events! The DragSim™ software application incorporates a custom interface designed for Windows 95/98/Me/2000/XP. Change components by simply clicking on any part “vehicle telemetry” curves are instantly updated. Display acceleration, elapsed time, vehicle speed, engine speed, tire slip, gear changes, aerodynamic drag and more with customizable graphs and charts comparing the data of up to four vehicles at once. The DragSim™ models a wide variety of traction conditions from street tires on poor track surfaces to Top-Fuel drag slicks under optimum conditions. To assist you in determining a traction value that ensures accurate ET and MPH predictions, a built-in Traction Calculator™ provides a one-button analysis of the vehicle-and-tire combination and offers an appropriate value in just seconds. DragSim™ also includes a powerful new testing technique that “homes in” on the best parts combinations, automatically!

POW102310

POW102305

FastLap™ Advanced ProTools™

FastLap™ Advanced ProTools™

$209.95

DragSim™ Advanced ProTools™

$209.95

Dynomation™ Advanced ProTools™ For engine builders, watching the inner workings of a running engine is an impossible task. But if it were possible, builders would be able to actually see and analyze the powerful wave dynamics controlling induction and exhaust flow, the holy grail of horsepower and torque creation. Now ProRacing Sim™, does the previously “impossible” with its Dynomation™ Advanced, allowing anyone to explore the effects of runner length, port taper angle, header tubing and collector dimensions, cam timing and more. Dynomation™ Advanced applies its tremendous modeling capability to a virtually unlimited range of engines, from humble, single-cylinder “lawn-mower” engines to exotic V-12 racing powerplants. Dynomation™ lets you see WHY an engine makes more power, or perhaps even more importantly, uncover and repair the reasons for poor performance. POW102315

Dynomation™ Advanced ProTools™

800-872-7223

$649.95

w w w. p o w e r h o u s e p r o d u c t s . c o m

31


TOOLS YOU NEED! Figure 1.

When it comes down to tuning at the track, carburetor jetting is one of the key essentials to a successful run. A mixture that's too rich will have a severe effect on performance, and a lean condition could severely affect the long-term reliability of pistons, valves and other internal engine components. MaxJet™ Precision Fuel Tuning System provides the racer with a finite linear fuel curve that always makes a difference in performance.

EXACT TOLERANCES ALLOW YOU TO TUNE FOR ADDITIONAL HP!

Figure 2.

See The Difference Typically, Holley jets are installed with a large, flat blade screwdriver. Use of a screwdriver or the recommended installation tool will cause some degree of damage to the “slot”. See Figure 1. This damage creates a turbulence at the inlet bow. See Figure 2. Damage to the “slot” is responsible for altering fuel delivery as much as 50 percent, depending on the severity of the damage.

Figure 3.

Figure 4.

MaxJet™ Holley

How many times have you heard a racer say, "I made two jet changes, but the engine still didn't run properly." The reason for this relates directly to the jets being used. Other jets are mass-produced with a wide tolerance, then plated. Many of these jets use the same orifice size with the only difference being different angle tapers that supposedly change the flow-rate characteristics. Other jets also use a "slot" that requires a special, expensive tool to install. Ultimately, these slots become damaged, and that damage creates a turbulence that severely affects the fuel flow as much as 50 percent. MaxJet™ is produced from virgin brass and precision machined on a CNC lathe. Each MaxJet™ is reamed to a precise size, with a tolerance of 0.0004" held on each jet. Our quality control is so stringent that we check one in every 10 jets produced to ensure each MaxJet™ you use flows consistently.

Feel The Power MaxJet™ is produced with 5/16” hex-stock brass (See Figure 3) to provide the racer with a jet that can be installed with no damage to the inlet bowl. Simply use a 5/16” nut driver. MaxJet™ is virtually indestructible. No damage at the inlet bowl provides smooth and precise fuel delivery. See Figure 4.

MaxJet Nut Driver ™

MaxJet™ is available from 0.050" to 0.120", in 0.001" increments and is compatible with all known racing fuels. MaxJet™ is easily crossedover from Holley jets, simply find the Holley size you're currently using and follow over to the MaxJet™ column.

32

800-872-7223

The MaxJet Nut Driver provides the racer with an inexpensive installation tool for MaxJet™ gasoline jets, MaxJet™ jet extensions and fuel bowl screws. MJ1-1

MaxJet™ Nut Driver

$3.92

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE How To Convert Holley to MaxJet™

Jet Kits

Simply follow the Holley column until you find the jet size you’re currently using, and the corresponding MaxJet™ is in the next column. For a MaxJet™ pocket size cross-reference, order Part # MJ15-1

MaxJet™ Jet Kits are designed to provide the racer with an assortment of jets for their application. Each kit includes 22 jets (11 sizes, two each) packaged in a MaxJet™ Fuel and Methanol Resistant Jet Box (PN# MJ5-1). To order the proper kit simply refer to the Holley crossover chart to find the jets currently being used. The jet box is capable of holding 18 different jet sizes, so it gives you the option of ordering additional sized jets at your convenience.

Jets

$4.37 / pair

Holley

MaxJet™

Holley

MaxJet™

52

MJ50-2

79

MJ86-2

53

MJ51-2

80

MJ87-2

54

MJ52-2

80.5

MJ88-2

55

MJ53-2

81

MJ89-2

56

MJ54-2

82

MJ90-2

57

MJ55-2

82.25

MJ91-2

58

MJ56-2

82.50

MJ92-2

59

MJ57-2

83

MJ93-2

60

MJ58-2

84

MJ94-2

61

MJ59-2

85

MJ95-2

62

MJ60-2

86

MJ96-2

63

MJ61-2

86.50

MJ97-2

64

MJ62-2

87

MJ98-2

65

MJ63-2

87.50

MJ99-2

66

MJ64-2

88

MJ100-2

67

MJ65-2

89

MJ101-2

68

MJ66-2

90

MJ102-2

69

MJ67-2

90.50

MJ103-2

69.25

MJ68-2

91

MJ104-2

69.50

MJ69-2

91.50

MJ105-2

69.75

MJ70-2

92

MJ106-2

70

MJ71-2

92.50

MJ107-2

70.25

MJ72-2

93

MJ108-2

70.50

MJ73-2

93.25

MJ109-2

70.75

MJ74-2

93.50

MJ110-2

71

MJ75-2

94

MJ111-2

72

MJ76-2

95

MJ112-2

73

MJ77-2

96

MJ113-2

74

MJ78-2

96.25

MJ114-2

75

MJ79-2

96.50

MJ115-2

76

MJ80-2

97

MJ116-2

76.25

MJ81-2

98

MJ117-2

76.50

MJ82-2

99

MJ118-2

77

MJ83-2

99.50

MJ119-2

78

MJ84-2

100

MJ120-2

78.50

MJ85-2

800-872-7223

Part Number MJ5060 MJ6171 MJ7282 MJ8393 MJ94104 MJ105115 MJ116126 MJ1-5

$42.19 / kit

Includes MaxJet® Numbers MJ50-2 to MJ60-2 MJ61-2 to MJ71-2 MJ72-2 to MJ82-2 MJ83-2 to MJ93-2 MJ94-2 to MJ104-2 MJ105-2 to MJ115-2 MJ116-2 to MJ126-2 Large storage box

1/4-32 Alcohol Jets

Replaces Holley 52 to 58 59 to 70 71 to 76 77 to 83 84 to 91 92 to 96 97-100 $6.96

$4.37 / pair

MaxJet™ 1/4-32 alcohol jets offer precise fuel metering for racers using modified Holley carburetor’s with standard metering blocks. These sizes are over and above a Holley 100 fuel jet.

Part # MJ121-2 MJ122-2 MJ123-2 MJ124-2 MJ125-2 MJ126-2 MJ127-2 MJ128-2 MJ129-2 MJ130-2

Orifice size 0.121” 0.122” 0.123” 0.124” 0.125” 0.126” 0.127” 0.128” 0.129” 0.130”

Part # MJ131-2 MJ132-2 MJ133-2 MJ134-2 MJ135-2 MJ136-2 MJ137-2 MJ138-2 MJ139-2 MJ140-2

Orifice size 0.131” 0.132” 0.133” 0.134” 0.135” 0.136” 0.137” 0.138” 0.139” 0.140”

Brass Screw-In Jet Extensions MaxJet™ Jet Extensions are designed to work with MaxJet™ and Holley jets. MaxJet™ extensions are longer than conventional screw-in jet extensions and hold more fuel and prevent cavitation during hard-launch conditions on the drag strip. Screw-in jet extensions require a notched float for proper operation. MJEXT-2

Brass Screw-In Jet Extensions

$2.77 / Pair

w w w. p o w e r h o u s e p r o d u c t s . c o m

33


TOOLS YOU NEED! Gator Brand™ High Performance Hose Clamps

One Piece Gear Box Stainless Steel Adjustment Screw Embossed Asymmetrical Threads Stainless Steel Continuous Band

Rolled Edges Prevent Cuts

Most people don’t concern themselves with small details like quality hardware until it’s too late. Gator Brand™ Hose Clamps are produced from ANSI W3 430 Grade Stainless Steel and feature a continuous band with embossed threads for reliable performance. The edges of the band are rolled to prevent any sharp edges from cutting the hose. This is especially important with silicone hoses that have a soft, vulnerable cover. The asymmetrical gear box and embossed threads provide a firm and even clamping force without causing damage to the hose, unlike conventional hose clamps. So don’t get hosed, build it right from the beginning with Gator Brand™ Hose Clamps.

Part# G3758 G398 G3912 G31216 G31220 G31225 G31230 G31232 G31240 G31250 G31260 G31280 G312100

Size (In.) 5/16-1/2 5/16-5/8 1/2-7/8 5/8-1 3/4-1 1/4 1-1 5/8 1 3/16-1 3/4 1 1/4-2 1 5/8-2 3/8 2-2 3/4 2 3/8-3 1/8 3 1/8-4 4-4 3/4

Size (mm) 8-12 8-16 12-20 16-25 20-32 25-40 30-45 32-50 40-60 50-70 60-80 80-100 100-120

SAE Size 2 3 6 8 10-12 16 20 24 28 32-36 40 52-56 64

GFT-1 Gator Brand™ FlexTool with 6 & 7mm Interchangeable Socket

34

800-872-7223

Price $0.49 $0.57 $0.59 $0.75 $0.76 $0.79 $0.80 $0.83 $0.84 $0.92 $1.03 $1.12 $1.96 $8.95

w w w. p o w e r h o u s e p r o d u c t s . c o m


PERFORMANCE SPECIALTY TOOLS & MORE Technical Resources Engine C.I.

Bore Size

Stroke Length

Pushrod Length

Ford V8 Engine 289 302 302 BOSS 351W 351C 351M 390 400M 406 427 428 429 460

4.000 4.000 4.000 4.000 4.000 4.000 4.050 4.000 4.130 4.230 4.130 4.360 4.360

2.870 3.000 3.000 3.500 3.500 3.500 3.871 4.000 3.780 3.780 3.984 3.590 3.850

6.876 6.876 6.876 8.144 8.408 9.500 9.620 9.500 9.620 9.620 9.620 8.550 8.550

4.000 3.781 3.875 4.063 4.120 4.094 4.120 4.150

3.000 3.750 3.750 3.750 3.750 4.000 4.000 4.210

8.120 8.693 9.130 9.130 9.130 9.130 9.130 9.130

Oldsmobile V8 Engine 260 307 330 350 394 400 (65-67) 400 (68,69) 403 425 455

Bore Size

Stroke Length

Pushrod Length

3.440 3.440 3.570 3.680

7.794 7.794 7.794 7.794

3.850 3.850 3.900

9.682 9.378 9.378

3.000 3.484 3.000 3.000 3.480 3.250 3.250 3.480 3.760 3.750 3.760 3.760 4.000

7.794 7.794 7.794 7.794 7.794 7.794 7.794 7.794 8.280/9.252 7.794 8.280/9.252 8.280/9.252 8.280/9.252

3.310 3.310 3.310 3.580 3.380 3.380 3.750 3.750 3.750 3.750

7.500 7.500 7.500 7.500 8.575 8.575 9.315 10.82/11.74 9.375 9.315

AMC V8 Engine

Pontiac V8 Engine 301 326 350 389 400 421 428 455

Engine C.I.

3.550 3.800 3.939 4.057 4.125 4.000 3.870 4.351 4.125 4.125

304 360 390 401

3.750 4.080 4.165 4.165

Buick V8 Engine 350 400 455

3.800 4.000 4.313

Chevrolet V8 Engine 265 267 283 302 305 307 327 350 396 400 402 427 454

3.750 3.500 3.875 4.000 3.736 3.875 4.000 4.000 4.094 4.125 4.125 4.250 4.250

Chrysler V8 Engine 3.385 3.385 3.385 3.385 3.688 3.975 4.250 3.385 3.975 4.250

8.234 8.234 8.234 8.234 8.234 9.750 9.750 8.234 9.750 9.750

273 318 340 360 383 400 413 426H 426W 440

3.630 3.910 4.040 4.000 4.250 4.340 4.180 4.250 4.250 4.320

Limited Warranty

Powerhouse速 Products warrants that all of its products are free from defects in material and workmanship. This limited warranty shall apply for a period of one year from date of purchase and shall cover only the original purchaser. Our obligation under this warranty is limited to the repair or replacement of the product. To make a warranty claim, call 901-795-7600 for a Return Authorization Number, and return the part within the one year period to Powerhouse速 Products, 3402 Democrat Road, Memphis, TN 38118, freight prepaid and insured.

There is absolutely no warranty on the following:

A) Any part used in racing applications. B) Any product that has been physically altered, improperly installed or maintained. C) Any product used in an improper application, abused or not used in conjunction with the proper parts. Powerhouse速 Products will not be responsible for incidental and consequential damages, property damage or personal injury damages to the extent permitted by law. There are no implied warranties of merchantability or fitness for a particular purpose. There are no warranties which extend beyond the description on the face hereof. Some states do not allow a limitation on how long an implied warranty lasts or do not allow the exclusion or limitation of consequential damages, so those limitations and exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state.

Warranty Returns

All merchandise returned for warranty consideration, inspection, repair, recalibration, etc., must be sent prepaid and insured. Included must be the sender's name, address, daytime phone number and a note explaining the nature of the problem or the work to be done. All merchandise returned for warranty must be accompanied by a Return Authorization Number.

800-872-7223

w w w. p o w e r h o u s e p r o d u c t s . c o m

35


Powerhouse速 Products 3402 Democrat Rd. Memphis, TN 38118 ORDERS: 1.800.872.7223 LOCAL: 1.901.795.7600 FAX: 1.901.375.3430

www.powerhouseproducts.com FILL THE GAPS IN YOUR BOX

PART# POW991000-06 息 Powerhouse 速 Products 2005


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.