CPT-223 Specs Sheet

CPT Test Drill Rig

CPT 223

CPT Test Drill Rig

CPT 223

TMG Manufacturing designs and produces an impressive line of compact track mounted CPT test drill rigs. Our CPT drill rigs, with front-mounted mast give you the ability to tilt the mast back for travel.

TMG has redesigned the rod clamping system, allowing you to choose from the standard top push system or TMG’s unique hydraulic clamp system.

This compact and powerful CPT test drill rig comes with an standard dual-hydraulic cylinder mast with anchoring drive head.

23

HORSE POWER

10

GPM HYDRAULIC FLOW

10 - 20

TONS IN THE PUSHING SYSTEM

10 - 15

INCHES CPT CONE OPTION TMG Manufacturing • Tampa, Florida • Telephone: (813) 464-2299 info@tmgmfg.com • www.tmgmfg.com

C

CPT 223

CPT Test Drill Rig

A

D

B

DIMENSIONS E

Standard Mast (1 mt CPT rod)

A. Height - Tower retracted 95” (7.91’) - 241 cm.

G F

B. Width - Anchors retracted 39.5” (3.29’) - 100.3 cm.

C. Height - Tower extended 138” (11.5’) - 350.5 cm.

D. Width - Anchors extended 59.7” (4.97’) - 151.6 cm.

E. Height - Mast tilted 60.36” (5’) - 153 cm.

TONS H TMG Manufacturing • Tampa, Florida • Telephone: (813) 464-2299 info@tmgmfg.com • www.tmgmfg.com

F. Length - Mast tilted 77.3” (6.44’) - 196 cm.

G. Length of body 97.3” (8.10’) - 247.1 cm.

H. Weight (approximate) 3000 lbs - 1360 kg.

Engine • 23 hp (17.5 kW) turbo charged Kohler gasoline engine • Water cooled • 0.725 liter displacement (725 cc) • Radiator cooling system • 12 V electric start • 3600 rpm • Direct injection • Emergency stop button • Rpm gauge • Oil pressure gauge • Oil level light

CPT 223

CPT Test Drill Rig

Hydraulic system • Hawe hydraulics power unit • 10 gpm (37.8 lpm) max hydraulic flow • Max 3000 psi (206 bar) • 2 stage gear pump • Feather touch controls • Oil cooler • In tank oil filter

Track system • Stationary track system (250 mm wide 1727 mm long - 9.8” wide 68” long) • NACHI 2B track motor with automatic brake system • Built in grease filled tensioning arm and spring

Mast • Dual hydraulic cylinder mast with dual automatic anchoring drive heads • Tilt rotate for travel • 5 ft (1.5 m) stroke (longer travel available) • 10 ton or 20 ton capacity

Drill motor - CPT • Top down CPT push system • 10 or 20 tons

Accessories • Auxiliary U.S.B. charger • Battery charger • CPT rod rack • PC/Tablet & CPT data logger holder

TMG Manufacturing • Tampa, Florida • Telephone: (813) 464-2299 info@tmgmfg.com • www.tmgmfg.com

CPT equipment (Optional) • Standard equipment • Controller datapack with data acquisition software • Cone - 10 or 15 cm, 10 or 20 ton penetrometer, with friction sleeve, pore pressure transducer and dual axis inclinometer • 40 meters cable • 30 x 1 meter long cone rods • Cylinder mounted marker with encoder • Interface, elect-hydraulic drive with head load • Spare parts: 8 x piezocone 10cm cone tips 8 x piezo filter HT (10 per pkg - in silicone) 4 x friction sleeve 2 x retaining O-ring kit 4 x cone O-ring kit • Other equipment options available

Fuel tank • 6 gallon (22.7 liters) fuel tank with fuel sending sensor

Hydraulic oil tank • 20 gallon (75 liters) hydraulic oil tank with built in site level glass

Options • Full function remote control for all drilling and driving operations • CPT equipment • TMG’s unique hydraulic clamp push system

CPT Test Drill Rig

CPT 223

Address: 5517 W. Sligh Ave, Suite 100. Tampa, FL 33634 Phone number: (813) 464-2299 Toll-Free number: 1-888-508-RIGS (7447) Fax: (813) 881-1199 E-mail: info@tmgmfg.com Website: www.tmgmfg.com Facebook: TMGManufacturing Youtube: TMGManufacturing Instagram: TMGManufacturing Linkedin: TMG-Manufacturing