Catálogo de Ergon 2012

Ergonomic Series 2012 No. 1 / 2012

P. 2 P. 6 P. 8 P. 9 P. 10 P. 12 P. 18 P. 19 P. 20

Saddles Contour Pedals Pedal Cleat Adjustment System Reportage Topeak Ergon Racing Team Racing Grips Performance Comfort Grips Technical Grips Reportage Ergon Factory Rider Gloves

Development Partner: German Sport University Cologne

German Innovation

WWW.ERGON-BIKE.COM

2

100% Ergonomics. 100% Mountain Biking.

5 Designed from the ground up, Ergon’s ergonomically optimized Mountain Bike Saddle combines high performance and fit in a previously unobtainable way. A 3D saddle shell - innovative ‘hollows’ in the shell - allow for considerably more damping material in the seat bone areas, than any other saddle in this category.

1: Ultra-thin, flex optimized carbon or GFK saddle shell with isolated rear mounting rails for added flex. 2: Innovative, multi-layered cushioning with progressive damping.

Tuned damping correlates with saddle width / use. 3: Nose mounted micro damper.

4: Saddle nose underside rubber cushion for shouldering the bike. 5: Chaff-reducing silicon coating on Pro and Carbon Pro models. 6: Optional standard rails, or Monolink® rail system (patent pending) allowing for maximum adjustment. All SM3 saddles are designed and engineered in Germany and manufactured by hand by Selle Italia in Italy.

2

1

3 6 4

3D Progressive Setup

State of the Art Saddle Development

Ultra-thin, flex optimized, carbon composite 3D saddle shell (Carbon Composite only on Pro / Carbon Pro models). Saddle shell is formed with 3D pockets under the sit bones allowing for extra padding. Y-Flex nose to seat design provides maximum freedom of movement when pedalling.

The Ergon Product Development Department utilized state of the art simulations, construction methods and analysis in the development of the SM3.

For example when creating the Ultra-thin saddle shell, FEM analysis was fundamental in mapping the load and stress areas. The shape of the saddle from top to bottom was defined in the Ergon Ergonomics Laboratory using a multitude of pressure sensing equipment combined with real world experience on test rides.

With this, many iterations lead to the final shape.

Highly elastic comfort padding

Internal harder padding

Saddle shell with 3D pockets

2

1. FEM analysis used in development process: Maximum deflection 6.19054mm* 2. Saddle shell designed with homogenous flex throughout.

Small

Which is the correct saddle width?

Scientific studies have concluded that in order for a saddle to be comfortable, it must match the individual sit bone width of the rider. This distance however changes depending on the angle at which the rider’s upper body is at. If the rider sits upright on the saddle, it is the rear parts of the sit bones which take their weight. As the rider leans more forward, then the point of the sit bone which makes contact rolls forwards. As the pelvis is also V formed towards the front, the contact area on the saddle needs to be large enough to provide comfort in different sitting positions. Ergon saddles are designed around the male pelvis form. For riders with a sit bone width of 10 - 13 cm we suggest size S, and for those with a sit bone distance of 12 - 15 cm we suggest L. There is some cross over, so we suggest test riding where possible.

10-13 cm

Large 12-15 cm Recommended Sizes** Sit bone width Saddle Size

* Measured in the pre-upholstered state.

1

** Variance is possible.

10-13 cm S

12-15 cm L

WWW.ERGON-BIKE.COM

3

New SM3 Pro Carbon

Super-light top of the range World Cup Team model. Flex Optimized Carbon Composite saddle shell. Super-light Carbon Fibre saddle rails. Friction minimizing silicon coating prevents chaffing. Soft, breathable, easy to clean, synthetic leather lorica micro-fibre cover. Alcantara® rear section. Available in sizes S and L for different sit-bone distances.

440 000 25 440 001 25 440 002 25

SM3-L Pro Carbon SM3-L Pro Carbon White SM3-L Pro Carbon Team Edition

440 000 20 440 001 20 440 002 20

SM3-S Pro Carbon SM3-S Pro Carbon White SM3-S Pro Carbon Team Edition

white

Sizes Weight Rails Cover Shell Use MSRP

Team Edition

• S (Small), L (Large) • ca. 184 g* (Large) / 179 g* (Small) • Carbon • Lorica® Micro Fibre, Alcantara® Rear Section • Carbon Fibre Ultra Thin Y-Flex Construction • Mountain Bike Racing, Cross Country, Marathon • $ 229.95 * Weights may vary owing to manufacturing tolerances.

WWW.ERGON-BIKE.COM

4

New SM3 Pro Flex Optimized Carbon Composite saddle shell. Lightweight Tinox hollow rails. Friction minimizing silicon coating prevents chaffing. Soft, breathable, easy to clean, synthetic leather futura® micro-fibre cover.

Diamantino rear section. Available in sizes S and L for different sit-bone distances.

white

440 000 15 440 001 15

SM3-L Pro SM3-L Pro White

440 000 10 440 001 10

SM3-S Pro SM3-S Pro White

Sizes Weight Rails Cover Shell Use MSRP

• S (Small), L (Large) • ca. 218 g* (Large) / 213 g* (Small) • TiNox • Futura® Mirco Fibre, Diamantino® Rear Section • Carbon Fibre Ultra Thin Y-Flex Construction • Mountain Bike Racing, Cross Country, Marathon • $ 159.95

New SM3 Flex Optimized GFK saddle shell. Lightweight Tinox hollow rails. Soft, breathable, easy to clean, synthetic leather futura® micro-fibre cover.

Available in sizes S and L for different sit-bone distances.

440 000 05 440 000 00

Sizes Weight Rails Cover Shell Use MSRP

SM3-L SM3-S

• S (Small), L (Large) • ca. 223 g* (Large) / 218 g* (Small) • TiNox • Futura® Micro Fibre • GF-Composite Ultra Thin Y-Flex Construction • Mountain Bike Racing, Cross Country, Marathon • $ 129.95 * Weights may vary owing to manufacturing tolerances.

WWW.ERGON-BIKE.COM

5

New SM3 Pro Carbon Monolink ® Super-light top of the range World Cup Team model. Flex Optimized Carbon Composite saddle shell. Monolink® carbon composite saddle rails for maximum adjustment. Friction minimizing silicon coating prevents chaffing. Soft, breathable, easy to clean, synthetic leather lorica® micro-fibre cover. Alcantara® rear section. Available in sizes S and L for different sit-bone distances.

white

Team Edition

440 000 65 440 001 65 440 002 65

SM3-L Pro Carbon Monolink® SM3-L Pro Carbon Monolink® White SM3-L Pro Carbon Monolink® Team Edition

440 000 60 440 001 60 440 002 60

SM3-S Pro Carbon Monolink® SM3-S Pro Carbon Monolink® White SM3-S Pro Carbon Monolink® Team Edition

Sizes Weight Rails Cover Shell Use MSRP

• S (Small), L (Large) • ca. 194 g* (Large) / 189 g* (Small) • Carbon Composite Monolink® • Lorica® Micro Fibre, Alcantara® Rear Section • Carbon Fibre Ultra Thin Y-Flex Construction • Mountainbike, Cross Country, Marathon • $ 199.95

New SM3 Monolink ® Flex Optimized GFC saddle shell. Monolink® Carbon Composite Rail.

Soft, breathable, easy to clean, synthetic leather futura® micro-fibre cover. Available in sizes S and L for different sit-bone distances.

440 000 55 440 000 50

Sizes Weight Rails Cover Shell Use MSRP

SM3-L Monolink® SM3-S Monolink®

• S (Small), L (Large) • ca. 190 g* (Large) / 185 g* (Small) • Carbon Composite Monolink® • Futura® Micro Fibre • GF-Composite Ultra Thin Y-Flex Construction • Mountain Bike Racing, Cross Country, Marathon • $ 169.95 * Weights may vary owing to manufacturing tolerances.

WWW.ERGON-BIKE.COM

6

Optimized power transfer, foot position, leg motion with normal shoes - PC2.

Anatomically contoured platform, 6° angle for better joint allignment, varus (knee) angle correction. Optimizes the biomechanics of the leg (hipknee-foot). Increases efficiency, minimizes knee complaints and hot spots / numbness in the feet.

Superlight pedal body made from high performance GF-Composite.

Development Partner: Magura, Germany.

Inner-stop for intuitively correct foot positioning on the pedal.

Maintenance free polymer bearings with radial seals.

Development partner: Igus®, Germany.

Ultra-Narrow axle constructions reduces Q-Factor, and is biomechanically more efficient.

Oversized integrated reflectors.

Development partner: Busch & Müller, Germany

3M-SafetyWalk™ creates a slip free platform and increases power transfer.

Dramatically increased contact area between shoe and pedal – increases power transfer and energy efficiency, reduces concentrated pressure points on the feet.

Dr. Kim Tofaute Sports Ergonomist

“From an ergonomic perspective pedals should not be overlooked for achieving optimized fit for bike and rider. Pedals are the point where muscle power is transferred to the bike, and therefore correct positioning of the foot and the leg is essential.

Additionally incorrectly positioned feet and legs are the cause of knee complaints, so getting this right improves comfort as well as efficiency. The Ergon PC2 Contour Pedal uniquely addresses all of these factors with its contoured platform, inner-stop guide and narrow q-factor.”

WWW.ERGON-BIKE.COM

7

PC2 A more efficient pedal. Ergon introduces the first flat pedal (or Contour Pedal as we call it) to provide an ergonomic and positive connection between bike and user. The first pedal designed with biomechanics and correct foot position in mind.

Advantages are increased power transfer, more control and fewer hot spots and knee complaints. The Ergon PC2 is the first non SPD-type pedal constructed with the ergonomic biomechanical demands of the user as a priority.

480 100 00 PC2-S (Pair) 480 100 10 PC2-L (Pair)

Shoe Size

materialvision 2011

2011

2010

Material Use Bearings MSRP

• Small (max. EU 42 / UK 7.5 / US 8.5) Large (min. EU 43 / UK 8 / US 9) • Superlight GF-Composite • Touring, Commuting, General Riding • Maintenance free polymer bearing • $ 79.95

New PC2 Evo.

480 100 02 PC2-S Evo* (Pair) 480 100 12 PC2-L Evo* (Pair)

The PC2 redefined the market for touring / commuting / everyday pedals. The PC2 Evo takes this one step further. Using lightweight materials, such as a carbon composite pedal body, and hollow mat chromed axle, the weight has further reduced. Other high end details are the CNC machined aluminium axle cap, and white integrated reflectors* for increased visibility.

Shoe Size Material Use Bearings MSRP

• Small (max. EU 42 / UK 7.5 / US 8.5) Large (min. EU 43 / UK 8 / US 9) • Carbon Composite • Touring, Commuting, General Riding • Maintenance free polymer bearing • $ 99.95 * Please check local traffic regulations - may or may not be road legal.

WWW.ERGON-BIKE.COM

8

TP1 Pedal Cleat Tool Shimano SPD® compatible No loss in power.

The first ever tool for simple yet precise Installation of cleats On cycling shoes.

The critical interface. The energy that goes into cycling is transferred via the pedal, shoe and cleat. Ergonomics in this area plays a massive role. Without an ergonomic setup power and performance will be lost. Comfort will be compromised. Injury could result. Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.

The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users information is provided about maximising performance. The tool is a favourite of Pro road and MTBers.

2008

IF Eurobike Award Gold Winner 2008 reddot Design Award Winner 2010

crankbrothers® compatible

Shimano SPD - SL® compatible

LOOK KéO® compatible

The crankbrother‘s Eggbeater pedal system is a favorite of many, and therefore we jumped at the chance of designing a TP1 for the specific needs of these users.

Accurate, simple and precise cleat (re)placement is now possible.

SPD®-SL users, one of the most popular road pedal systems, can now benefit from the accuracy and piece of mind offered by an Ergon TP1. The tools form allows all regularly sized road shoes to be set up correctly for more performance and long-term comfort on the bike.

Look KeO® users, one of the most popular road pedal systems, can now benefit from the accuracy and piece of mind offered by an Ergon TP1. The tools form allows all regularly sized road shoes to be set up correctly for more performance and long-term comfort on the bike.

1. Fore / Aft adjustment

2. Adjusting the stance (Q-Factor)

3. Adjusting the cleat angle

480 000 00 480 000 10 480 000 01 480 000 05

TP1 Shimano SPD® compatible TP1 crankbrothers® compatible TP1 Shimano SPD - SL® compatible TP1 LOOK KéO® compatible

Shoe Size Material Contents MSRP

• One fits all • Tech. Polypropylene • TP1, Handbook, Reference stickers • $ 29.95

9

WWW.TOPEAK-ERGON.COM

Topeak-Ergon Racing Team www.topeak-ergon.com

Since 2005 Topeak-Ergon Racing Team has been one of the most successful Professional Mountain Bike Teams worldwide. World XC Champion, World Marathon Champion, European Marathon Champion, World 24h Championships Pairs Silver, German National Champion - a few of the successes the team has in the last five years..

Topeak-Ergon Racing Team is an essential part of the research and development into new products, flowing feedback directly into the core of product development.

Ergon’s support does not stop with Topeak-Ergon Racing Team.

Through our international distributors Ergon can be seen being used by top-level athletes Worldwide. From Japan to the United Kingdom, Brazil to Italy. Many top riders demand they ride Ergon. We also support many local events, where the unsung heroes, the end users, get to experience Ergon.

Irina Kalentieva www.irina-kalentieva.com

Dave Wiens www.topeak-ergon.com

Ira is one of the strongest mountain bikers worldwide.

A long list of championships, wins and medals underlines this. 2 World Championship Titles, an Olympic Medal and countless national titles. Silver in the World Championships in 2010 she has ridden for Team Topeak Ergon since 2006. She is a member of the family and provides valuable input for product development.

XC World Championship Silver 2010 XC World Champion 2009 and 2007 Olympic XC Bronze 2008

Alban Lakata www.albanlakata.com

Hard on himself, hard on the bike, hard on his competition - the Albanator. “He is like a dirtbike.

When others are worn out and backing off, he knocks it down a gear and disappears into the distance,” the words of team Mechanic Lars Hartwich. It works for him. 2010 World Marathon Champion and a complete weight weenie - he pushes the product development hard too.

Marathon World Champion 2010 Marathon World Championship Silver Medal 2009 European Marathon Champion 2008

There aren’t many real Legends in the MTB scene, but Dave Wiens is one of the few. For over 20 years he has raced against, and quite often beaten the best in the World. A career that has seen him as the US National Champion twice, he has managed as well as raced for teams. His status was officially recognised in 2002 with his admission to the “Mountain Bike Hall of Fame”.

In 2009 the score was settled as Dave fought to win his seventh Leadville 100, against amongst others, Lance Armstrong (who he had beaten in 2008). Finishing second to Lance though is something only Alberto Contador can better! With Wiens’ experience his input to Ergon cannot be quantified.

10

WWW.ERGON-BIKE.COM

Racing GS1

A new standard.

A new design from the ground up - designed for endurance riding.

Reduced wing for easier hand positioning.

The Marathon Grip.

Developed as a specific marathon grip, the GS1 has become the racer‘s grip of choice. The grip‘s unique internal construction supports the hand using two internal supports individually tuned for perfect rebound and control. The lightweight leichtbau Direct Control rubber ensure ultimate feel and feedback.

Available in two sizes.

GS2 Carbon

DirectControl Leichtbau rubber for precise feedback and optimized damping.

424 000 17 424 600 17 424 600 19

GS1-L GS1-L Team Edition GS1-L White

424 000 12 424 600 12 424 600 14

GS1-S GS1-S Team Edition GS1-S White

Sizes Weight Clamp Use MSRP

Annodized, highly secure lightweight aluminum clamp.

The brand new grip of the 2010 World Marathon Champion Alban Lakata.

Especially tuned for Endurance riding.

Recommended for use with: HX Glove Series

Team Edition

White

• S (Small), L (Large) • ca. 155 g* (Large) / 146 g* (Small) • Aircraft Aluminum • Mountainbike, Marathon • $ 39.95

The GS grip series offers an optimized balance of comfort and performance required by top endurance athletes. A completely new grip from the ground up, it uses DirectControl Leichtbau rubber to keep the weight down, combined with a new, more cushioned form to protect the hands better on all day rides, 24 hour and marathon racing. The grip has 3 distinct areas, using different compounds and textures to provide grip and comfort as required. The GS2 Carbon adds a independently adjustable 3 finger bar end from 100% carbon (50 g each bar end).

Recommended for use with: HX Glove Series 424 000 57 424 600 57 424 000 52 424 600 52

Team Edition

Sizes Weight Barend Use MSRP

GS2-L Carbon GS2-L Carbon Team Edition GS2-S Carbon GS2-S Carbon Team Edition

• S (Small), L (Large) • ca. 220 g* (Large) / 212 g* (Small) • 100% Carbon • Mountainbike, Marathon • $ 99.95 * Weight per pair, without end plugs (where applicable).

WWW.ERGON-BIKE.COM

11

Racing GS2 Using the grip body as the GS2 Carbon, the GS2 adds an innovative GFC 3 finger bar end. Featuring non-slip rubber inserts, the bar end doubles as the clamp, allowing both the grip and the bar end to be independently adjusted.

Recommended for use with: HX Glove Series 424 000 37 424 600 37 424 600 38

GS2-L GS2-L Team Edition GS2-L White

424 000 32 424 600 32 424 600 33

GS2-S GS2-S Team Edition GS2-S White

Sizes Weight Barend Use MSRP Team Edition

• S (Small), L (Large) • ca. 231 g* (Large) / 222 g* (Small) • GF-Composite with rubber inserts • Mountainbike, Marathon • $ 59.95

White

GS3 The GS3 is the bigger brother of the GS2. Using the same grip body, the benefits of Leichtbau DirectControl rubber and the new endurance design have been combined with a full sized GF-Composite bar end. Featuring non-slip rubber inserts, the bar end doubles as the clamp for grip allowing both to be individually angled.

Recommended for use with: HX Glove Series 424 000 97 424 000 92

Sizes Weight Barend Use MSRP

GS3-L GS3-S

• S (Small), L (Large) • ca. 289 g* (Large) / 280 g* (Small) • GF-Composite with rubber inserts • Mountainbike, Marathon • $ 69.95

WWW.ERGON-BIKE.COM

12

Performance Comfort Problem: Carpal tunnel syndrome

Solution: Ergon Grip

Ergon GP and GS grips prevent numb fingers, painful hands and forearms – problems that many riders face. The cause of this is high pressure on the particularly sensitive areas of the palm and an incorrect hand position. Due to their anatomically optimal design, Ergon grips provide a contact surface of 100%. Regular grips only provide a contact surface of approximately 60%.

With increased contact surface, pressure is especially reduced in the area of

Problem: Ulna nerve irritation

Solution: Ergon Grip

the ulna nerve, thus decreasing the likelihood of numbness. Furthermore, the anatomic form of the Ergon Performance and Race Series grips corrects your hand position. An incorrect hand position and overloading of the median nerve (a leading cause of carpal tunnel syndrome) are impossible as long as the grip is mounted correctly.

Short and Sweet. New Product Names in 2012.

All Ergon product names follow a schematic within which product group are clearly split, yet related products are quickly identified. The Performance Comfort Series, for historical reasons, was not always consistent. In order to improve on this, and clarify the product line, the names have been adjusted.

This will be in place from the start of 2012.

Performance Comfort: until 2011:

from 2012

Grips: GP1 GC2 GR2 GR3 GC3

GP1 GP2 GP3 GP4 GP5

The Size Difference.

As hand size is different from person to person, Ergon manufactures the GP and GS ranges in two sizes - Small and Large. This difference is in the diameter of the grip. The reason for this is that a larger hand is better able to grip a larger grip with less stress and effort. This is the same in

reverse for small grip. A smaller hand needs a smaller grip to allow the hand to close around it. Of course, this is all also down to personal preference. More information is available online at: www.ergon-bike.com

Small:

Large:

92 mm Outside Grip Circumference

102 mm Outside Grip Circumference

Size S: 6.5 - 8.5

Size L: 8.5 - 10.5

WWW.ERGON-BIKE.COM

13

Performance Comfort GP1 Ergon’s original and ground breaking GP1 continues to set standards. Offering optimal pressure distribution and available in two sizes, it features a forged aluminum clamp for fast and secure installation. Adjustment of the support platform is achieved by simply loosening the clamp bolt and positioning the grip to the desired Newtral position.

Recommended for use with: HC Glove Series

2/2008

424 000 15 424 001 15 424 002 15

GP1-L GP1-L Gripshift® compatible GP1-L Rohloff® / Nexus® compatible

424 000 10 424 001 10 424 002 10

GP1-S GP1-S Gripshift® compatible GP1-S Rohloff® / Nexus® compatible

2/2007 “Excellent”

2004

Variants Sizes Barend Use MSRP

• Regular | Gripshift® | Rohloff®/Nexus® • S (Small), L (Large) • Forged Aluminum • Mountainbike, Touring, Commuting • $ 29.95

New GP2 The GP2 replaces the best selling GC2 grip. The new 2 finger GFC bar end delivers increased grip thanks to the rubberized anti-slip lower texture, and optimized ergonomics. Bar end and grip body can be infinitely independently adjusted dependent on preference.

Recommended for use with: HC Glove Series

424 000 28 424 001 28 424 002 28

GP2-L GP2-L Gripshift® compatible GP2-L Rohloff® / Nexus® compatible

424 000 23 424 001 23 424 002 23

GP2-S GP2-S Gripshift® compatible GP2-S Rohloff® / Nexus® compatible

Variants Sizes Barend Use MSRP

• • • • •

Regular | Gripshift® | Rohloff®/Nexus® S (Small), L (Large) GF-Composite with rubber inserts Mountainbike, Touring, Commuting $ 39.95

WWW.ERGON-BIKE.COM

14

Performance Comfort GP3 (formerly known as the GR2)

Two densities of hypo-allergenic rubber ensure comfort, precise steering and damping keeping you in control.

Composite 3 Finger Bar End with rubberized texture.

Asymmetric form follows the anatomic specifics of both the left and right hand.

Smooth texture prevents thumb rub

Plastic intnernal skeleton supports the wrist while soft rubber ensured sufficient damping.

Optimized pressure distribution prevents numbness and aching.

The GP3 features a GF-Composite 3-finger bar end with anti-slip rubber inserts. Its size and shape are ideal for small to medium sized hands (Size S: 6.5 – 8.5) as well as for medium to larger sized hands (Size L: 8.5 – 10.5). The bar end and the grip platform can be independently adjusted for the correct support angle and provides the perfect fit for your individual riding style.

424 000 36 424 001 36 424 002 36

GP3-L GP3-L Gripshift® compatible GP3-L Rohloff® / Nexus® compatible

424 000 31 424 001 31 424 002 31

GP3-S GP3-S Gripshift® compatible GP3-S Rohloff® / Nexus® compatible

Recommended for use with: HC Glove Series Variants Sizes Barend Use MSRP

• Regular | Gripshift® | Rohloff®/Nexus® • S (Small), L (Large) • GF-Composite with rubber inserts • Commuting, Touring • $ 49.95

New: Grip Compound - Made in Germany Ergon’s product development team doesn’t only focus on Ergonomics - material research is also a core theme. The demands and testing our products undergo meet those of the automotive industry, and far exceed the industry standard. Ergonomics, Product Design and Engineering - everything is done in-house in Germany. It is from this that successful projects have been born, such as our GreenLab initiative, which explores the use of sustainable materials. For 2011 we quietly introduced what is a major milestone in our development. All grips in the Performance Comfort Series were switched to a new rubber compound. As part of this process 39 rubber compounds were developed and tested. It was worth it, the new material - made in Germany - meets the highest standards, is longer lasting and worldwide is exclusive to Ergon for the bicycle industry.

• Developed and Manufactured in Germany • Extremely high UV resistance - corresponds to automotive standards • Contaminant Free - Only medically approved ‘white oil’ used in production • All raw materials meet the standards set for use in food production EU (2002/72/EG) • All raw materials meet the purity standards of European Resolution AP(89)1 • Free of PAK - no Phthalates used in production • SGS TÜV certification (raw material safety certification) • Highest quality standard within the bicycle industry

WWW.ERGON-BIKE.COM

15

Performance Comfort GP4 (formerly known as the GR3) The GP4 offers the recognized class leading ergonomics of all Ergon Performance Comfort Series grips, combined with a full size, ergonomic, angle adjustable bar end. This doubles to clamp itself and the independently adjustable grip into position. The bar end features rubberized inserts for a firm slip free hold.

Recommended for use with: HC Glove Series 424 000 95 424 000 90

Variants Sizes Barend Use MSRP

GP4-L GP4-S

• • • • •

Regular S (Small), L (Large) GF-Composite with rubber inserts Mountainbike, Touring, Commuting $ 59.95

GP5 (formerly known as the GC3) 1/2010: “Very good”

In some situations people simply need more hand positions.

Employing the much proven ergonomic grip body of the GP1, the GP5 introduces a hollow formed glass fiber reinforced ergonomically shaped bar end. Featuring rubberized inserts for positive grip, like all of Ergon’s bar ends it can be independently positioned relative to the grip and acts as the clamp preventing accidental rotation. The grip itself is available in two sizes.

Recommended for use with: HC Glove Series

2009

3/2009

7-8/2009

424 000 75 424 001 75 424 002 75

GP5-L GP5-L Gripshift® compatible GP5-L Rohloff® / Nexus® compatible

424 000 70 424 001 70 424 002 70

GP5-S GP5-S Gripshift® compatible GP5-S Rohloff® / Nexus® compatible

Variants Sizes Barend Use MSRP

• Regular | Gripshift® | Rohloff®/Nexus® • S (Small), L (Large) • GF-Composite with rubber inserts • Commuting, Touring • $ 69.95

WWW.ERGON-BIKE.COM

16

Performance Comfort GP1 BioKork Clamp 100% recyclable aluminum

Grip Core 40% Biowert® grass fibre

Endcap 40% Biowert® grass fibre Grip Surface Improved feel thanks to cork’s natural properties

Grip Rubber Compound 40% Cork from certified sustainable forest

The GP1 BioKork provides ultimate ergonomics for the hand just as the rest of Ergon’s Performance Comfort series do, however the unique qualities of cork means that it is now antibacterial and hypoallergenic. Cork’s natural damping qualities also make it an ideal grip material, and its now density mean the resulting grip is a lot lighter.

The GP1 BioKork uses 40% cork, sourced from sustainable forests in Portugal which is certified for its ecologically sound production. This ecological theme is continued throughout the rest of the grip. The inner core is plastic reinforced using natural fibre, which make up 40% of its mass. In place of mineral oil, the gel in the palm section of the grip is vegetable oil based. The clamp can also be 100% recycled. It is all a result of Ergon’s “GreenLab” initiative.

Recommended for use with: HC Glove Series 424 000 16 424 001 16 424 002 16

GP1-L BioKork GP1-L BioKork Gripshift® compatible GP1-L BioKork Rohloff® / Nexus® compatible

424 000 11 424 001 11 424 002 11

GP1-S BioKork GP1-S BioKork Gripshift® compatible GP1-S BioKork Rohloff® / Nexus® compatible

materialvision 2011

6/2010 “Very good”

4/2010 “Very good”

2010

Variants Sizes Clamp Use MSRP

• Regular | Gripshift® | Rohloff/Nexus® • S (Small), L (Large) • 100% Recyclable Aluminum • Mountainbike, Touring, Commuting • $ 39.95

Packaging Material Innovation 09

Ergon’s GreenLab initiative is about combining the core principles of ergonomics and performance with ecologically aware practices.

Introduced in 2010, and for 2011, the GreenLab initiative has played an important role in the Ergon Development Department and the results FSHPO@PGGJDF@ @ of that can be seen starting with the innovations in the last two years.

Ergon’s extensive grip assortment is now presented with completely reworked and re-invented packaging. This uses as little material as possible to achieve our aims, and much of the material used is recycled.

The sustainability of the packaging was a key factor, and that the packaging can be recycled after use, and uses as few components as possible, a priority – minimising the environmental impact. The result of this new packaging quest is so innovative that it has already won the coveted German DesignPlus packaging FSHPO@PGGJDF@ @ prize. Further examples are the GP1 BioKork, GP3 BioKork and the GP5 BioKork grips. Once again, it is Ergon setting the standards using the most innovative materials and technology to achieve our aims.

WWW.ERGON-BIKE.COM

17

Performance Comfort GP3 BioKork

(formerly known as the GR2 BioKork)

The GP3 BioKork offers a different feel thanks to the use of natural cork, while offering all the ergonomic advantages of every Ergon Performance Comfort Series grip. The 3 finger angle adjustable bar end offers an additional hand position.

Recommended for use with: HC Glove Series 424 000 26 424 000 21

Variants Sizes Barend Use MSRP

GP3-L BioKork GP3-S BioKork

• Regular • S (Small), L (Large) • GF-Composite with rubber inserts • Mountainbike, Touring, Commuting • $ 59.95

GP5 BioKork

(formerly known as the GC3 BioKork)

The GP5 BioKork offers all the ergonomic advantages of every Ergon Performance Comfort Series grip – dissipating pressure and optimizing the hand and wrist position, combined with the unique feel of natural cork. The angle adjustable multi-hand position bar end features rubberized inserts for a firm slip free hold.

Recommended for use with: HC Glove Series 424 000 76 424 000 71

Variants Sizes Barend Use MSRP

Adapted grips for different shifters.

Perfomance Comfort Series • for regular shifters • for Gripshift® • for Rohloff®/Nexus®

GP5-L BioKork GP5-S BioKork

• Regular • S (Small), L (Large) • GF-Composite with rubber inserts • Touring, Commuting • $ 79.95

Regular shifters • both grips are long

Gripshift® • both grips are shortened

Racing Series • for regular shifters Technical Series • for regular shifters

Rohloff®/Nexus® • right grip is shortened

18

WWW.ERGON-BIKE.COM

Technical New GA1 Evo

Blue

1/2011: GA1 “Excellent” (Test for previous model)

The choice of Ergon Factory Riders. One form, 5 colours. Increased damping thanks to use of a new compound. Weight greatly reduced through use of a stable composite clamp. Details: Inner core - Ergon Green (not visible when fitted).

Carbon bar compatible. All of this for just $ 24.95.

Recommended for use with: HA and HE Glove Series

424 100 80 424 100 81 424 100 82 424 100 84 424 100 83

Sizes Weight Clamp Use MSRP

GA1 Evo GA1 Evo White GA1 Evo Green GA1 Evo Red GA1 Evo Blue

1

2

Optimized Surface 1: Minimal thumb rub 2: Shaped mid zone 3: Rougher texture for increased grip

3

Black

White

Green

Red

• One Size • ca. 115 g* • FMC - Fiber Matrix Composite • All Mountain • $ 24.95

4

5

Optimized Core 4: ‘Window’ in grip core for improved feel 5: Tuned and non-uniform wall thickness for i mproved damping

* Weight per pair, without end plugs.

WWW.ERGON-BIKE.COM

19

Ergon Factory Rider “EFR” Downhill, Freeride, 4-Cross, Dirt, Enduro.

Ergon searches out some of the best riders in every discipline to assist with product development. Technical riding experts, downhillers, 4-cross riders and mountain bike legends. Their feedback is extremely important and flows into the products.

Hans Rey Holger Meyer Stefan Herrmann Karen Eller Timo Pritzel “The more difficult the trick, the more important it is that the grips give you total feedback. They communicate the bike to you, and allow you to control it. Also, when you bottom out the suspension (which you will!) the ergonomic form of Ergon’s GA1 Evo dissipates the shocks efficiently. Add to that the colors, and why would you use anything else?”

Photographer: Viktor Strasse

Richie Schley “Ergon grips are simply better. The external clamp communicates the precise location of the end of the bars. The ergonomic shape and feel is superb. Try them, find out yourself.”

Photographer: Blake Jorgenson

Tibor Simai “Performance and style are the be all and end all.

The GA1 Evo ticks these boxes. Excellent grip and absolutely bombproof on the bars. Arm pump is a thing of the past, no matter how many runs I do.”

Photographer: Markus Greber

20

WWW.ERGON-BIKE.COM

Racing HX1 The HX1 is specially cut and designed to be close-fitting and lightweight for cross-country and race applications. It matches perfectly to the GS grip series. Thin padding for increased trail feedback and thin breathable back of hand material make for a comfortable yet unobtrusive glove. The silicon print is specially designed to prevent the glove twisting in use.

Recommended for use with: GS Grip Series

460 003 00 460 003 01 460 003 02 460 003 03 460 003 04 460 003 05

Sizes Palm Material Use MSRP

HX1 X-Small HX1 Small HX1 Medium HX1 Large HX1 X-Large HX1 XX-Large

• XS - XXL • Micro-fibre Velour-leather • Mountainbike, Cross Country, Marathon • $ 39.95

HX2 The HX2, like the HX1 is specially cut and designed to be close-fitting and lightweight for cross-country and race applications matching perfectly with the GS grip series. Thin padding for increased trail feedback and thin breathable back of hand materials make for a comfortable yet unobtrusive glove. The silicon print is specially designed to prevent the glove twisting in use. Through the clever placement of seams in the fingers, they cannot be felt when wearing the glove.

Recommended for use with: GS Grip Series

460 003 40 460 003 41 460 003 42 460 003 43 460 003 44 460 003 45

Sizes Palm Material Use MSRP

HX2 X-Small HX2 Small HX2 Medium HX2 Large HX2 X-Large HX2 XX-Large

• XS - XXL • Micro-fibre Velour-leather • Mountainbike, Cross Country, Marathon • $ 44.95

WWW.ERGON-BIKE.COM

21

Performance Comfort HC1 The Ergon HC1 is a short fingered glove, especially designed for use with the Performance Comfort series of grips. The glove features flexible yet robust mesh material for ventilation of the back of the hand. The thinly padded palm and fingers allows for increased feel and the benefits of Ergon grips not to be restricted. The ball of the hand has a slight increase in cushioning material for better pressure relief of this sensitive area.

Recommended for use with: GP Grip Series

460 002 00 460 002 01 460 002 02 460 002 03 460 002 04 460 002 05

Sizes Palm Material Use MSRP

HC1 X-Small HC1 Small HC1 Medium HC1 Large HC1 X-Large HC1 XX-Large

• XS - XXL • Micro-fibre Velour-leather • Touring, Leisure, Commuting • $ 35.95

HC2 The long fingered glove, the Ergon HC2 is again especially designed for use with the Performance Comfort series of grips. The glove features the same flexible yet robust mesh material as the HC1 for ventilation of the back of the hand. The thinly padded palm and fingers allows for increased feel and the benefits of Ergon grips not to be restricted. The ball of the hand has a slight increase in cushioning material for better pressure relief of this sensitive area. The fingers are slightly bent, even before the glove is put on, as on the bike the hand is usually closed. Through the clever placement of seams, they cannot be felt when wearing the glove.

Recommended for use with: GP Grip Series

460 002 40 460 002 41 460 002 42 460 002 43 460 002 44 460 002 45

Sizes Palm Material Use MSRP

HC2 X-Small HC2 Small HC2 Medium HC2 Large HC2 X-Large HC2 XX-Large

• XS - XXL • Micro-fibre Velour-leather • Touring, Leisure, Commuting • $ 39.95

WWW.ERGON-BIKE.COM

22

Technical New HE2

Blue

Black

The award winning best selling HE2 is optimized for All Mountain and Enduro use, and makes a perfect combination with Ergon’s Technical Series grips. Offering protection and freedom of movement, the elasticated wrist band stablizes the wrist, while a Kevlar insert protects the ball of the hand. Thin padding allows for maximum feedback. Now available in brown and blue.

Recommended for use with: GA Grip Series

460 005 40 460 005 41 460 005 42 460 005 43 460 005 44 460 005 45

HE2 Extra Small HE2 Small HE2 Medium HE2 Large HE2 Extra Large HE2 Extra Extra Large

460 005 50 460 005 51 460 005 52 460 005 53 460 005 54 460 005 55 460 005 60 460 005 61 460 005 62 460 005 63 460 005 64 460 005 65

Sizes Palm Material Usage MSRP

HE2 Brown X-Small HE2 Brown Small HE2 Brown Medium HE2 Brown Large HE2 Brown X-Large HE2 Brown XX-Large HE2 Blue X-Small HE2 Blue Small HE2 Blue Medium HE2 Blue Large HE2 Blue X-Large HE2 Blue XX-Large

• XS - XXL • Micro-fibre Velour-leather • Enduro, Downhill, Freeride • $ 39.95

Brown

WWW.ERGON-BIKE.COM

23

HA2

The Ergon HA2 is an all-mountain glove matching the GA series of grips. The glove offers a combination of protection and flexibility. A high quality integrated closure makes for a crease and seam free cuff. A Kevlar insert offers additional protection for the ball of the hand, while carefully positioned padding ensures the required feedback is not lost.

460 004 40 460 004 41 460 004 42 460 004 43 460 004 44 460 004 45

HA2 X-Small HA2 Small HA2 Medium HA2 Large HA2 X-Large HA2 XX-Large

Recommended for use with: GA Grip Series Sizes Palm Material Use MSRP

• XS - XXL • Micro-fibre Velour-leather • Enduro, Downhill, Freeride • $ 44.95

WWW.ERGON-BIKE.COM

Ergon International: RTI Sports GmbH Universitaetsstr. 2, 56070 Koblenz/Germany T +49 (0) 261 899998-28, F +49 (0) 261 899998-19 www.ergon-bike.com www.rtisports.de

Ergon USA, Inc. 8285 Sunset Blvd.

Suite #12 West Hollywood, CA. 90046 T 323-656-2788, T 877-573-7466 (Toll Free) F 323-848-9097 www.ergon-bike.com

Ergon Racing Teams

Tests

7/2011: BC2 „Very good“

8/2011: BC3 “Good”

1/2011: GX1 - Test Winner

7/2011: BX2 “Very good”

5/2010: BC2 “Very good”

(Test for previous model)

3/2009: GP5*

“Excellent”

2/2008: GP1

1/2011: GA1 “Excellent”

2/2008: GP2*

2006-2010: GP1

7/2010: BC3 “Very good” 2/2007: GP1 - Best Buy “Excellent” Design-Awards

materialvision 2011 2011: PC2

2011: SM3 Pro Carbon

2010: GP1 Biokork

Monolink®

2009: GP5*

2010: PC2

2005: GP3*

2008: TP1

2004: GP1

2006: GX1 / GX2

2010: GP5*

2010: GP1 Biokork

2005: GP3*

* Product names re-alligned for 2012.

Ergon® is a worldwide trademark, Ergon® product and packaging designs are worldwide patent pending. GripShift® are registered trademarks of Sram® Inc, Shimano®, Nexus® are registered trademaks of Shimano® Inc, Rohloff® is a registered trademark of Rohloff AG, SPD® is a registrated trademark of Shimano® Inc., Kéo® is a registrated Trademark of LOOK® Cycle International, crankbrothers® is a registrated trademark of crankbrothers® Inc., Monolink® is a Trademark of Selle Italia®. Druckfehler, Irrtümer und Änderungen vorbehalten

2011: PC2

12/2010: GP1 BioKork