Essential DraperTools Autumn Edition by Total Motor Factors

Essential Tools Autumn drapertools.com NEW SITE LIGHT RANGE See page 66 BATTERY CARE See page 12 NEW BUNKER® ROLLER CABINETS See page 47 HEATERS See page 29 VEHICLE DIAGNOSTICS See page 15 PROMOTION VALID UNTIL 31 DECEMBER 2022

Contents Hand Tools 3–11 Vehicle Servicing Tools 12–19 Workshop Equipment 20–24 Compressors & Air Tools 25–27 Welders 28 Heating 29–32 Engineering 33 Woodworking 34–38 Pressure Washers, Water Pumps & Generators39–40 Power Tools & Accessories 41–46 Workshop Storage & Toolkits 47–55 Building Tools 56–59 Lighting 60–69 Landscaping & Gardening Tools 70–75 There’ll soon be a chill in the air and leaves falling. To get you prepared, we’ve put together a huge array of products in our Essential Tools Autumn Edition. drapertools.com Customer service: +44 (0) 23 8026 6355 customerservices@drapertools.com Product helpline: +44 (0) 23 8049 4344 Find a local stockist: drapertools.com/find-a-stockist • A comprehensive range of tools for a wide range of applications • Rigorous quality control to ensure every tool meets the demands of the user • A lifetime warranty on Draper hand tools • A dedicated product support helpline • Over 100 years of experience • Reliable stock levels, fast despatch • A wide range of spares and after-sales support • Committed to sustainability • A comprehensive network of local stockists – get the tool you need when you need it REASONS TO CHOOSE DRAPER Keep up with the conversation

•

Draper

Stock No. 16449

•

• Packed in a tough plastic storage case with a soft grip handle

Contents: 15

Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm 12

£28.33 Ex. VAT £33.99 Inc. VAT £55.83 Ex. VAT £66.99 Inc. VAT £87.49 Ex. VAT £104.99 Inc. VAT Metric Socket Set, 1/4" Sq. Dr. (47 Piece) Stock

Hardened and tempered chrome vanadium steel with satin chrome plating for corrosion protection

Packed

plastic storage case

13 x

8 x

1 x

2 x

3 x

Socket Set, 3/8" Sq. Dr. (37 Piece)

• Hardened and tempered chrome vanadium steel with a satin finish

Packed in a steel carrying case

18,

No. 16355 •

•

in a

Contents:

Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm

Deep sockets: 6, 7, 8, 9, 10, 11, 12, 13mm 1

72-Tooth reversible ratchet with quick-release button

Spinner handle

Universal joint

Extension bars: 100, 150mm 1

1/4" Sq. dr. to 1/4" hex bit adaptor

Plain slot bits: 4, 5.5, 8mm 3

Cross slot bits: No.1, No.2, No.3 6

Hex bits: 2, 3, 4, 5, 6, 8mm 8

Draper TX-STAR® bits: T8, T10, T15, T20, T25, T27, T30, T40 Metric

Stock No. 16367

•

Contents: 18

Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,

19, 20, 21, 22, 24mm 11

Deep sockets: 8, 9, 10, 11, 12, 13, 14, 16, 17, 19, 22mm 3

Spark plug sockets: 10, 12, 14mm 1

72-Tooth reversible ratchet with quick-release button 2

Extension bars: 75, 150mm 1

T-bar 1/2"(F) x 3/8"(M) adaptor 1

Universal joint

Expert

Socket Set, 3/8"

Metric

Sq. Dr. (36 Piece)

Six-point sockets with a knurled ring for extra grip

Hardened and tempered chrome vanadium steel with chrome plating for corrosion protection

3 x

1 x

3 x

1 x

1 x Universal

Expert Metric Socket Set, 1/4" Sq. Dr. (26 Piece) Stock No.

Draper

metric

with

extra grip

polished

x Deep sockets: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm

Spark plug sockets: 10, 12, 14mm

72-Tooth reversible ratchet with quick-release button

Wobble extension bars: 75, 150, 250mm

Sliding T-bar

joint Draper

16476 •

Expert HI-TORQ®

sockets

a knurled ring for

• Hardened and tempered chrome vanadium steel, chrome plated and

for corrosion protection

13 x

7 x

2 x

1 x

£52.49 Ex. VAT £62.99 Inc. VAT 3 drapertools.com Hand Tools

• Packed in a heavy-duty pressed steel metal storage case Contents:

Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm

Deep sockets: 5, 6, 7, 8, 10, 11, 13mm 1

72-Tooth reversible ratchet with quick-release button

Wobble extension bars: 50, 100mm

Sliding T-bar

Universal joint

Spinner handle

Combined MM/AF Socket Set, 1/2" Sq. Dr. (41 Piece) Stock No.

• Hardened and tempered chrome vanadium steel with a micro satin finish

Packed in a tough plastic storage case

22 x

10 x

3 x Spark

1 x 72-Tooth reversible ratchet with quickrelease button 3 x Extension bars: 75, 150, 200mm 1 x Sliding T-bar 1 x Universal joint Combined MM/AF Socket Set, 3/4" Sq. Dr. (26 Piece) • Includes metric and imperial sockets • Hardened and tempered steel with a polished finish • Packed in a plastic storage case Contents: 11 x Metric sockets: 22, 24, 26, 27, 30, 32, 33, 36, 38, 41, 46mm 10 x Imperial sockets: 15/16, 1⅛, 13/16, 1¼, 15/16, 1⅜, 17/16, 1½, 1⅝, 1¾" 1 x Reversible ratchet 1 x Sliding T-bar 3 x Extension bars: 100, 150, 200mm Orange Stock No. 04502 Black Stock No. 48329 £72.49 Ex. VAT £86.99 Inc. VAT £124.99 Ex. VAT £149.99 Inc. VAT £134.99 Ex. VAT £161.99 Inc. VAT Contents: 23 x

32mm 3 x Spark plug sockets: 10, 12, 14mm 1 x 72-Tooth reversible ratchet with quick-release button 1 x Wobble extension bar: 125mm 1 x Sliding T-bar 1 x Universal joint 22 x Metric sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32mm 10 x Imperial sockets: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1" 3 x Spark plug sockets: 10, 12, 14mm 1 x 72-Tooth ratchet with quick-release button 3 x Wobble extension bars: 75, 125, 250mm 1 x Sliding T-bar 1 x Universal joint RRP Ex. VAT £96.66 £113.33 RRP Inc. VAT £115.99 £135.99 Metric Socket Set, 1/2" Sq. Dr. (30 Piece) Stock No. 16466 Draper Expert Socket Sets MM/AF Combined Socket Set, 1/2" Sq. Dr., Blue (41 Piece) Stock No. 16467 • Twelve-point sockets with a knurled ring for extra grip • Hardened and tempered chrome vanadium steel with a polished finish • Packed in a tough plastic storage case with a soft grip handle 4 drapertools.com Hand Tools

82136

•

Contents:

Metric sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32mm

Imperial sockets: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1"

plug sockets: 16, 18, 21mm

Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30,

Impact Socket Set, 3/8" & 1/2" Sq. Dr. (32 Piece) Stock No. 83098

Chrome molybdenum steel, hardened, tempered and chemically blackened for corrosion protection

Hole for accessory spring-loaded ball

Packed in a plastic storage case Contents: 9 x 3/8" Sockets: 8, 9, 10, 11, 12, 14, 15, 16, 17mm 10 x 1/2" Sockets: 13, 15, 17, 18, 19, 21, 22, 25, 27, 30mm 10 x 1/2" Deep sockets: 13, 15, 17, 18, 19, 21, 22, 24, 27, 30mm 1 x 1/2" (F) to 3/8" (M) adaptor 1 x 3/8" Extension bar: 75mm 1 x 1/2" Extension bar: 75mm NEW Draper Expert HI-TORQ® 6 Point Metric Deep Impact Socket Set, 1/2" Sq. Dr. (11 Piece) Stock No. 30925

Made from chrome vanadium steel correctly hardened and tempered • Black phosphate finish for corrosion protection

Hole for receiving ball retainer

Supplied inside a steel storage tin Contents: Sizes: 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm £66.66 Ex. VAT £79.99 Inc. VAT £40.83 Ex. VAT £48.99 Inc. VAT Draper Expert Metric Coloured Socket Sets • Chrome vanadium steel that is hardened, tempered and chrome plated, with a knurled ring for extra grip • Each size socket has a unique colour for easy identification • Packed on a plastic hanging rail that can be used to store the sockets in a toolbox Ref Stock no.DriveNo. of PiecesContents Socket Type RRP Ex. VAT RRP Inc. VAT 1 50151 1/4" Sq. Dr.10 PieceSizes: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm Standard £14.16£16.99 2 50158 1/4" Sq. Dr.10 PieceSizes: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm Deep £15.83£18.99 3 50493 1/2" Sq. Dr.10 PieceSizes: 9, 10, 11, 12, 13, 14, 15, 17, 18, 19mmStandard £19.16£22.99 4 50541 1/2" Sq. Dr.6 PieceSizes: 13, 14, 15, 16, 17, 18mm Deep £17.49£20.99 1 2 3 4 Visit drapertools.com for all socket sets 5 drapertools.com Hand Tools

•

T70

30mm Spline bits: 5, 6, 8, 10, 12mm

75mm Spline bits: 6, 8, 10, 12mm

30mm Hex bits: 4, 5, 6, 7, 8, 10, 12

75mm Hex bits: 5, 6, 7, 8, 10mm 2

30mm Plain slot bits: 8, 10mm

30mm PZ-type bits: No.1, No.2, No.3 5

Draper TX-STAR® 1/4" sq. dr. socket: E4, E5, E6, E7, E8

Draper TX-STAR® 3/8" Sq. dr. socket: E10, E11, E12, E14

Draper TX-STAR® 1/2" Sq. dr. socket size: E16, E18, E20

Draper Expert HI-TORQ® Metric Deep Impact Socket Set, 1/2" Sq. Dr. (10 Piece) Stock No. 38369 • Forged from hardened, tempered and chemically blackened chrome vanadium steel • Hole for receiving ball retainer • Supplied in a steel carrying case Contents: Sizes: 10, 11, 12, 13, 14, 17, 19, 22, 24, 27mm Draper Expert Mechanic's Socket and Bit Set, 3/8, 1/2" Sq. Dr. (61 Piece) Stock No. 63376 • S2 steel bits and chrome vanadium steel sockets • All bits are correctly hardened and tempered • Packed in a blow-moulded carrying case Draper Expert Combined MM/AF Deep Impact Socket Set in Metal Case, 3/4" Sq. Dr. (12 Piece) Stock No. 83281 • Chrome molybdenum steel hardened, tempered and chemically blackened for corrosion protection • Ring and pin sold separately • Packed in a steel carrying case Contents: 9 x Metric sockets: 22, 24, 27, 30, 32, 33, 34, 36, 38mm 3 x Imperial sockets: 1, 1½, 17/16 " Draper Expert Impact Hexagonal Socket Bit Set, 1/2" Sq. Dr. (8 Piece) Stock No. 26439 • Sockets with integral hexagonal bit • Chrome molybdenum steel, hardened and tempered with a black phosphate finish • Packed in a blow-moulded case Contents: Sizes: 5, 6, 8, 10, 12, 14, 17, 19mm £208.33 Ex. VAT £249.99 Inc. VAT £54.16 Ex. VAT £64.99 Inc. VAT £40.83 Ex. VAT £48.99 Inc. VAT £39.16 Ex. VAT £46.99 Inc. VAT Contents: Sizes: 17, 19, 21, 23mm Sizes: 17, 19, 21mm RRP Ex. VAT £34.99 £49.99 RRP Inc. VAT £41.99 £59.99 Wheel Nut Socket Set, 1/2" Sq. Dr. (4 Piece) Stock No. 82972 Draper Expert Wheel Nut Sockets for Alloy Wheels Long Reach Wheel Nut Socket Set, 1/2" Sq. Dr. (3 Piece) Stock No. 82981 • Made from chrome molybdenum • Nylon sleeved to prevent damage to alloy rims when used • Supplied in a plastic storage case Contents: 1 x 10mm Hex x 3/8" sq. dr. bit holder 1 x 10mm Hex x 1/2" sq. dr. bit holder 1 x 14mm Hex x 1/2" sq. dr. bit holder 8 x 30mm Draper TX-STAR® security bits: T20T, T25T, T27T, T30T, T40T, T45T, T50T, T55T 2 x 50mm Draper TX-STAR® security bits: T60T, T70T 8 x 75mm Draper TX-STAR® bits: T20, T25, T27, T30, T40, T45, T50, T55 2 x 78mm Draper TX-STAR® bits: T60,

6 drapertools.com Hand Tools

5 x

4 x

7 x

5 x

3 x

4 x

3 x

Draper Expert Precision Torque Wrench, 1/2" Sq. Dr., 30 - 100Nm Stock No. 58138

Marked range 30–100Nm

Manufactured to ISO 6789-12-01 Standard (accuracy ±4%)

Locking preset action

Reversible ratchet head

Clockwise right-hand thread torque application only

Supplied in case Draper Expert Precision Torque Wrench, 3/4" Sq. Dr., 120 - 400Nm Stock No. 64673 • Marked range 120–400Nm • Manufactured to ISO 6789-12-01 Standard (accuracy ±4%) • Locking preset action • Reversible ratchet head • Clockwise right-hand thread torque application only • Supplied in case Draper Expert Precision Torque Wrench, 3/8" Sq. Dr., 5 - 22Nm Stock No. 58130 • Marked range 5–22Nm • Manufactured to ISO 6789-1992-12-01 Standard (accuracy ±4%) • Locking preset action • Reversible ratchet head • Clockwise right-hand thread torque application only • Supplied in case Draper Expert Breaker Bar, 1/2" Sq. Dr., 640mm Stock No. 34334 • Specially designed chrome molybdenum hinged joint head for extra torque £116.66 Ex. VAT £139.99 Inc. VAT £249.99 Ex. VAT £299.99 Inc. VAT £83.33 Ex. VAT £99.99 Inc. VAT £19.16 Ex. VAT £22.99 Inc. VAT Stock no.Size RRP Ex. VAT RRP Inc. VAT 26502 1/4" Sq. Dr. £16.66£19.99 26503 3/8" Sq. Dr. £18.33£21.99 26504 1/2" Sq. Dr. £22.49£26.99 Stock no.Size RRP Ex. VAT RRP Inc. VAT 26810 3/8" Sq. Dr. £29.16£34.99 26817 1/2" Sq. Dr. £35.83£42.99 Draper Expert Soft Grip Reversible Ratchets, 72 Tooth Draper Expert Flexible Head Extending Reversible Ratchets, 72 Tooth • Made from hardened and tempered chrome vanadium steel • 72-Tooth mechanism • Soft grip handle • Made from hardened and tempered chrome vanadium steel • 72-Tooth mechanism • Soft grip handle 7 drapertools.com Hand Tools

•

Contents: Sizes: 34, 36, 38, 41, 46, 50mm 6 x Metric stubby: 10, 11, 12, 13, 14, 15mm 6 x Imperial stubby: 1/4, 3/8, 7/16, 1/2, 9/16, 5/8" 10 x Metric standard: 6, 7, 8, 9, 10, 12, 13, 15, 17, 18mm 10 x Imperial standard: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4" RRP Ex. VAT £108.33 £58.33 RRP Inc. VAT £129.99 £69.99 Contents: Sizes: 8, 9, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, 32mmSizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 11/16, 1⅛, 1¼" RRP Ex. VAT £54.16 £58.33 RRP Inc. VAT £64.99 £69.99 Metric Combination Spanner Set (6 Piece) Stock No. 26695 Metric (14 Piece) Stock No. 29547 Draper HI-TORQ® Combination Spanner Sets Draper Expert HI-TORQ® Combination Spanner Sets Four Combination Spanner Set (32 Piece) Stock No. 26697 Imperial (14 Piece) Stock No. 29548 • Chrome vanadium steel that is hardened, tempered and chrome plated • Draper HI-TORQ® ring ends offset at 15° • Open ends set at 15° • Supplied in a wall-mountable plastic storage rack • Chrome vanadium steel that is hardened, tempered and chrome plated • Draper Expert HI-TORQ® ring ends offset at 15° • Open ends set at 15° • Supplied in Tetron divided wallet with tie cord £38.33 Ex. VAT £45.99 Inc. VAT £39.99 Ex. VAT £47.99 Inc. VAT Draper Expert HI-TORQ® Metric Combination Spanner Set, 8 - 22mm (12 Piece) Stock No. 64605 • Deep offset pattern • Draper Expert HI-TORQ® ring ends cranked at 15° • Chrome vanadium steel that is hardened, tempered, chrome plated and fully polished throughout Contents: Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22mm HI-TORQ® Metric Ratcheting Combination Spanner Set (7 Piece) Stock No. 25397 • Draper HI-TORQ® ratchet ring end requires only 4° movement to turn fastener • Open ends set at 15° • Forged chrome vanadium steel, hardened, tempered, chrome plated and fully polished throughout Contents: Sizes: 8, 10, 12, 13, 14, 17, 19mm 8 drapertools.com Hand Tools

•

£49.99 Ex. VAT £59.99 Inc. VAT £249.17 £299.00 £31.66 Ex. VAT £37.99 Inc. VAT £24.99 Ex. VAT £29.99 Inc. VAT £10.83 Ex. VAT £12.99 Inc. VAT Draper Expert HI-TORQ® Metric Coloured Combination Spanner Set (13 Piece) Stock No. 23017 • Draper HI-TORQ® ring ends cranked at 15° • Open ends set at 15° • Each colour represents a different size • Chrome vanadium steel that is hardened, tempered and colour chrome plated Contents: Sizes: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm Soft Grip Precision Screwdriver & Bit Set (31 Piece) Stock No. 09550 • Soft grip handles with revolving tops • Hardened chrome vanadium steel blades • Handles with revolving tops Contents: 6 x Plain slot bits: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0mm 4 x PH-type bits: No.00, No.0, No.1, No.2 8 x Draper TX-STAR® bits: T4, T5, T6, T7, T8, T10, T15, T20 7 x Hexagonal bits: 1.0, 1.3, 1.5, 2.0, 2.5,

1 x Star

1 x

1 x Tri-winged security

1 x Spanner security bit:

1 x Magnetic bit holder/driver

Expert Impact Screwdriver Set (12 Piece)

No. 22322

Removes stubborn fasteners through impact

3.0, 4.0mm

bit: 2mm

Round bit: 1mm dia.

Triangle bit: 3mm

bit: 3.0

2.6mm

Draper

Stock

•

Forward/reverse rotation and impact-absorbing hand grip

Bit holder can be removed to use 1/2" sq. dr. socket with impact sockets

Supplied in a steel storage case

1 x Impact screwdriver 1 x 8mm Hex to 1/2" sq. dr. adaptor 2 x Plain slot bits: 8, 10mm 2 x PH-type bits: No.2, No.3 2 x PZ-type bits: No.2, No.3 4 x Draper TX-STAR® bits: T40, T45, T50, T55 Draper Expert Metric Crow Foot Spanner Set on a Metal Rail, 3/8" Sq. Dr. (8 Piece) Stock No. 61034 Contents: Sizes: 10, 12, 13, 14, 15, 17, 19, 22mm Long Metric Stainless Steel Combination Spanner Set (8 Piece) Stock No. 44019 • Hardened and tempered stainless st • Bi-hexagon ring and jaw

For use under clean conditions – catering, laboratory and medical, for example

Will not promote oxidation on stainless steel fixings

Will not contaminate work area with chrome plate flakes Contents: Sizes: 8, 10, 11, 13, 14, 17, 19, 22mm Metric Tubular Box Spanner Set (6 Piece) Stock No. 28967 • EN8 carbon steel, zinc plated and lacquered for corrosion protection

Includes tommy bars Contents: 6 x Spanners: 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm 2 x Tommy bars: 100, 150mm 9 drapertools.com Hand Tools

Contents:

•

Contents: Sizes: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0mm Sizes: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0mm RRP Ex. VAT £12.49 £15.83 RRP Inc. VAT £14.99 £18.99 Contents: Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50 Sizes: T10T, T15T, T20T, T25T, T27T, T30T, T40T, T45T, T50T RRP Ex. VAT £19.16 £24.99 RRP Inc. VAT £22.99 £29.99 Stock No. 66126 Metric Long Arm Key Set (9 Piece) Stock No. 66143 Draper Expert Metric Coloured Hex. Key Sets Draper Expert TX-STAR® Coloured Key Sets Extra Long Hex. and Ball End Key Set (9 Piece) Stock No. 66134 Security Key Set (9 Piece) Stock No. 22204 • Blades manufactured from chrome vanadium steel that is hardened, tempered and chrome plated with a protective coloured finish • Each colour signifies a different size • Supplied in a fold-out easy-release holder • Blades manufactured from chrome vanadium steel that is hardened, tempered and chrome plated with a protective coloured finish • Each colour signifies a different size • Supplied in a fold-out easy-release holder Draper Expert Soft Grip Metric Hex & Ball End T-Handle Key Set (8 Piece) Stock No. 33873 • Hex ball end long arm and hex end short arm • Made from chrome vanadium steel, with a blackened finish • Ball end allows use at a 30° angle • Soft grip T-handle design maximises torque • Supplied with a steel wall mounting stand Contents: Sizes: 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10mm Draper Expert TX-STAR® Soft Grip Metric T-Handle Key Set (8 Piece) Stock No. 33872 • Draper TX-STAR® long arm and TX-STAR® security short arm • Made from chrome vanadium steel, with a blackened finish • Soft grip T-handle design maximises torque • Supplied with a steel wall mounting stand Contents: Sizes: T9, T10, T15, T20, T25, T27, T30, T40 £18.33 Ex. VAT £21.99 Inc. VAT £31.66 Ex. VAT £37.99 Inc. VAT 10 drapertools.com Hand Tools

Stock no.SizeCapacity RRP Ex. VAT RRP Inc. VAT 94535 100mmUp to 16mm £4.99£5.99 70395 150mmUp to 22mm £5.83£6.99 70396 200mmUp to 27mm £7.08£8.50 70398 250mmUp to 31mm £8.33£9.99 70402 300mmUp to 39mm £11.66£13.99 70405 375mmUp to 46.5mm £24.99£29.99 Adjustable Wrenches • Forged from hardened and tempered chrome vanadium steel with a satin chrome finish • Laser-etched measurement markings For more hand tools, visit drapertools.com and find your local stockist 11 drapertools.com Hand Tools

4.2A, 5 - 45Ah Stock No. 70544 6/12V Battery Chargers • 6V/12V selector switch • Charging progress indicator • Protects battery from overcharging and excessive current • Fitted with short circuit protection for safety • Overheating and polarity protection 5.6A, 6 - 60Ah Stock No. 53071 12V Smart Charger and Battery Maintainer, 2A Stock No. 53488 • Will maintain a 12V battery at 100% for a long duration • Compatible with most vehicles, including cars, motorcycles and vans • Winter charging mode protects batteries in freezing temperatures 6/12V Smart Charger and Battery Maintainer, 10A Stock No. 53491 • Will maintain a 12V battery at 100% for a long duration • Reconditioning mode for deep discharged batteries • The 12V DC power supply enables battery removal without losing car settings • Compatible with most vehicles, including cars, motorcycles and vans • Winter charging mode protects batteries in freezing temperatures Charge type 6-Step automatic smart charger 10-Step automatic smart charger (analyses and reconditions deep discharged batteries) Charge rate 2A 10A Voltage 12V 6V/12V Suitable battery types Lead acid, MF, Ca/Ca, AGM, gel Lead acid, MF, Ca/Ca, AGM, gel, LiFePO4 Dimensions W 165 x H 75 x D 48mm W 165 x H 75 x D 48mm Weight 0.48kg 0.93kg LCD Screen No Yes RRP Ex. VAT £30.96 £66.00 RRP Inc. VAT £37.15 £79.20 Charging output 6V/12V 6V/12V Charging current 4.2A 5.6A Supply voltage 230V AC 230V AC Power 100W 120W Rated battery capacities 5-45Ah 6–60Ah Suitable battery type Lead acid Lead acid Dimensions W 200 x H 230 x D 115mm W 185 x H 176 x D 100mm Weight 1.5kg 2.06kg RRP Ex. VAT £21.00 £32.99 RRP Inc. VAT £25.20 £39.59 drapertools.com 12 Vehicle Service Tools

12V Battery Charger, 10A Stock No. 53168 • Microprocessor controlled • Mode selection control panel • LCD screen with easy to read icons • Clamp holder and onboard power cord storage • 1.0A and 2.4A USB ports 12V Battery Starter/Charger, 30A Stock No. 53171 • Microprocessor controlled • 70A engine start • Battery recondition/desulphation mode • Large easy to read LCD screen and a mode selection control panel • Clamp holder and onboard power cord storage • Rugged housing with polarity protection • 1.0A and 2.4A USB ports 12/24V Battery Starter/Charger, 360A Stock No. 11967 • Charges lead-acid, lead-acid maintenance free, lead AGM, lead-calcium and gel batteries • Polarity protected • Thermal overload protection • Easy to read ammeter • Transport handles and wheels £92.08 Ex. VAT £110.49 Inc. VAT £112.00 £134.40 Inc. VAT £257.08 Ex. VAT £308.50 Inc. VAT Stock no.Current chargeAmperage RRP Ex. VAT RRP Inc. VAT 52965 10-14A60-200Ah £64.00£76.80 52985 16-20A90-250Ah £72.00£86.40 53000 20-25A100-300Ah £78.00£93.60 53007 120-350A120-350Ah £82.00£98.40 12/24V Battery Chargers • Insulated copper leads and battery clips • Convenient cable storage • Integral carry handle Charging current (average) 50A (EN 60335) Charging current (effective) 75A (RMS) Charging output 12V/24V Cranking current (average) 280A (EN 60335), 360A (RMS) Dimensions W 350 x H 615 x D 260mm Input Single phase 230V 16A Weight 23kg Charge type Fully automatic smart charge with 70A engine start function Charge rate 2, 5, 10, 20, 30A Voltage 12V Suitable battery types Lead acid, gel, AGM, MF Dimensions W 365 x H 110 x D 195mm Weight 2.8kg Charge type Fully automatic smart charge Charge rate 1, 3, 5, 10A Voltage 12V Suitable battery typesLead acid, gel, AGM, MF Dimensions W 305 x H 110 x D 195mm Weight 2.18kg Battery, Bulb, Fuse and Continuity Tester Stock No. 90478 • For testing dr y cell 1.5V batteries (AAA, AA, C, D and button-type), 9V batteries (PP3 /6LR61), household and automotive fuses, bulbs with bayonet fittings plus push/screw-type torch light bulbs • Readings display on the clear and simple analogue scale • Audible continuity tester via test probes (supplied) £11.66 Ex. VAT £13.99 Inc. VAT 13 drapertools.com Vehicle Service Tools

•

£70.83 Ex. VAT £84.99 Inc. VAT £28.33 Ex. VAT £33.99 Inc. VAT NEW Auto Memory Saver Stock No. 09191 • For maintaining voltage continuity to an engine computer when the vehicle battery is disconnected • Prevents wasting time having to reprogramme lost codes • Particularly useful when changing the main car battery • Features a power source for 12V DC accessories and a USB outlet for charging tablets and iPads • Fitted with a rechargeable 4Ah battery and LED power indicators 6 - 24V Auto Probe DC Power Circuit Electrical Tester Stock No. 61820 • Suitable only for DC automotive electrical circuits • Ideal for testing for bad earth tracing, breaks in continuity, short circuits and powering up components on and off the vehicle • Not suitable for testing AC circuits • Simple LED illumination for positive (green) and negative (red) voltage Contents: 1 x DC circuit tester 1 x 3.45m Flexible cable 2 x Crocodile clips 1 x Wire probe 1 x Back probe Draper Expert 50 SMD LED Under Bonnet Rechargeable Inspection Lamp, 2000 Lumens Stock No. 65391

SMD LED with three settings

360-degree rotational bar

Telescopic aluminium frame with rubberised ends that extends

117–190cm

from

The battery can be charged inside the lamp or removed and charged separately

USB-C charger cable supplied

Endoscope Inspection Camera

No.

Wi-Fi

Stock

91648

Waterproof camera for submerged applications

Six brightness-controlled LED lights • Wirelessly communicates with phones and tablets • Flexible, semi-rigid cable bends and holds its shape • Auto-exposure camera • Suitable for inspection of pipelines, air condition units and vent pipes and for use within the automotive sector Stock no.SizeAmp rating RRP Ex. VAT RRP Inc. VAT 91883 3m x 16mm2 220A/1.1V £52.49£62.99 91878 5m x 25mm2 210A/1.1V £116.66£139.99 Draper Expert Heavy Duty Booster Cables • Pure copper cable • Ultra- flexible TPE cable insulation • Suitable for 12V/24V systems • Supplied in a luxury padded EVA storage bag Light type 50 SMD LED Brightness 500–2,000lm Power source 4.8Ah Li-ion battery Run time 3–9 hours Charge time 4 hours Length 117–190cm Weight 1.12kg OS compatibility iOS, Android IP rating 67 Length 3.5m Resolution HD 720p Lens 8mm OBD connector cable length 0.6m DC 12V plug cable length 1.5m AC/DC adapter cable length 1.8m Weight 1.98kg £74.99 Ex. VAT £89.99 Inc. VAT £24.99 Ex. VAT £29.99 Inc. VAT Suitability 6–24V DC Probe length 68mm Weight 340g 14 drapertools.com Vehicle Service Tools

£9.16 £10.99 £115.00 Ex. VAT £138.00 Inc. VAT £35.83 Ex. VAT £42.99 Inc. VAT Draper Expert Vacuum and Pressure Test Kit (22 Piece) Stock No. 35883 • Compatible with most vehicles • Includes comprehensive equipment for bleeding brake and clutch units • Suitable for fault-finding common issues in air conditioning, fuel, transmission, turbo waste gates, valve stem oil seals, ignition and emissions • Dual reading pressure 0–60psi/0–1bar • Easily dismantled for cleaning • Supplied in a plastic storage case Contents: 1 x 63mm Gauge and pump 1 x 32mm Suction cup 1 x Tapered hose adaptor 1 x Gun cone 2 x 120ml Reservoir 3 x Bleed nipple adaptors 5 x Extension tubes 8 x Hose end cones Draper Expert Turbo/EVAP Smoke Diagnostic Machine Pipe Vacuum Leak Detector Stock No. 94079 • Switch between turbo and EV • Variable pressure regulator • Five-minute duty cycle • Runs up to 0.75psi (EVAP) and 20psi ( turbo) • Supplied in a case with a range of accessories Contents: 1 x Air intake adaptor 1 x Hook 1 x Smoke outlet hose 1 x EVAP service tool kit 1 x Cap plug kit 1 x Battery cable 1 x Standard cone adaptor Draper Expert Universal Cooling System Pressure Test Kit (5 Piece) Stock No. 53591 • The four universal cone adaptors fit a wide range of vehicles • Hand pump with gauge allows simple and easy controlled testing • Release pin allows depressurisation prior to detachment • Supplied inside a sturdy plastic case Contents: 1 x Pressure pump 4 x Cone adaptors: 17–24, 28–31.5, 37–39.5, 47–48.5mm Anti-Freeze Tester, Disc Type Stock No. 35807 • For testing et (antifreeze) density • Six floating readings in both Celsius and Fahr • Range: -7 to • Suitable for testing bot coolant strengths Draper Expert Brake Fluid Tester 80872 tester probe in brake Coloured LEDs indicate water cont Fitted with an LED light to help illuminat brake reservoirs For use with Dot 3, Dot 4, Dot 5.1, AC Delco ennzoil Dot 3, Prestone Dot 3, Motorcraft Dot 3 and Toyota Dot 3 Fitted with a AA A battery (supplied) £74.99 Ex. VAT £89.99 Inc. VAT £666.66 Ex. VAT £799.99 Inc. VAT Voltage 12V DC Pressure 3–20psi Pressure (EVAP mode) 0.75psi Operating temperature -17–60°C Generator protection temperature 115°C Vapour output hose 3m Operating mode Smoke 5-min cycle/Air cycle Weight 4.5kg 15 drapertools.com Vehicle Service Tools

£12.49 Ex. VAT £14.99 Inc. VAT £11.66 Ex. VAT £13.99 Inc. VAT £23.33 Ex. VAT £27.99 Inc. VAT £87.49 Ex. VAT £104.99 Inc. VAT £35.83 Ex. VAT £42.99 Inc. VAT Steel long stem aids remo • Serrated tips for better grip • Especially suited for stubborn seals • Dipped PVC handles for improved comfort Inflatable Air Wedge, 160 x 160mm, 150kg Max. Load Stock No. 08972 • Powerful and controlled 150kg lif ting pressure • 2–50mm Expansion range • 160 x 160mm Contact surface • Pressure relief valve for controlled height adjustment • High-frequency welded and bonded hose Injector Seal Removal Tool Stock No. 61809 • Made from heavy-duty carbon steel • For the removal of 6.7–8.7mm internal diameter injector seals • Supplied inside a blow-moulded case Stock No. 08286 • Suitable for front wheel vehicles • Jaw width 82mm • Steel handle dipped in rubber for comfor t and grip Flexible Ratcheting Hose Clamp Pliers, 230mm Stock No. 89793 • Comprehensive kit suitable for a variety of vehicles • Enables the removal of top suspension nuts by holding the strut piston • Go-through design • For clamp diameters from 18 to 54mm (approx.) • Fitted with 630mm long cable for awkwardly positioned hose clips • Supplied in a sturdy plastic carr y case Contact surface160 x 160mm Max. load 150kg Expansion range 2–50mm Hose length 110mm Bellow 80 x 43mm Weight 120g 16 drapertools.com Vehicle Service Tools

£23.33 Ex. VAT £27.99 Inc. VAT Puller for Ribbed Drive Pulley, 35-165mm Stock No. 61790 • Made from heavy-duty carbon steel • For use on crankshafts, alternators, air conditioning units and water pumps • Low profile arms for use in restricted space • Locking bolts prevent slipping under tension Draper Expert Oil Sump Plug Repair Kit (120 piece) Stock No. 36631 • A comprehensive kit for simple and effective repair of damaged oil sump drain plug threads • Comprises six different sized taps along with sump bolts and washers • Packed in a blow-moulded case with EVA foam insert Contents: 1 x M13 x 1.25mm tap 7 x M13 x 1.25mm 14mm sump bolt 12 x Washers for M13 bolt 1 x M13 x 1.5mm tap 7 x M13 x 1.5mm 17mm sump bolt 12 x Washers for M13 bolt 1 x M15 x 1.5mm tap 7 x M15 x 1.5mm 19mm sump bolt 12 x Washers for M15 bolt 1 x M17 x 1.5mm tap 7 x M17 x 1.5mm 8mm sump bolt 12 x Washers for M17 bolt 1 x M20 x 1.5mm tap 7 x M20 x 1.5mm 10mm sump bolt 12 x Washers for M20 bolt 1 x M22 x 1.5mm tap 7 x M22 x

19mm sump bolt 12 x Copper washers for M22 bolt Draper Expert Brake Bleeder Adaptor Kit Stock No. 28836 • Suitable for a wide range of vehicle brake and clutch systems • Supplied in robust, convenient carrying case Contents: 1 x Universal adapter (BC-0813) 1 x Universal adapter (BC-0712) 1 x GM adapter (BC-01) 1 x GM adapter (BC-02) 1 x Nissan commercial adapter (BC-03) 1 x European adapter

1 x Honda accord adapter (BC-09) 1 x Nissan adapter (BC-10) 1 x Honda adapter (BC-12) 1 x Nissan Primera adapter (BC-19) 1 x Toyota adapter (BC-21) 1 x Euro coupling 1 x Universal adaptor clamp 2 x Universal thumbscrews 4 x Universal washers 2 x Universal hooks 1 x Universal chain £64.16 Ex. VAT £76.99 Inc. VAT £179.16 Ex. VAT £214.99 Inc. VAT Stock no.Size RRP Ex. VAT RRP Inc. VAT 66240 65L £316.66£379.99 66241 90L £374.99£449.99 Draper Expert Gravity/Suction Feed Oil Drainers • Air-operated waste oil drainer with gravity-fed reservoir • Fitted with a suction pump for the extraction of oil via the dipstick and a 400mm, 10L collection bowl • Discharge is by air pressure • Fitted with safety valve, 18L steel telescopic collection pan, oil reservoir level indicator and small working tray • Heavy-duty castors for easier manoeuvrability 17 drapertools.com Vehicle Service Tools

1.5mm

(BC-06)

Draper Expert Universal Clutch and Brake Bleeding Kit (7 Piece) Stock No. 00041 • Comprehensive six-piece spanner set • Suitable for most brake and clutch hydraulic units • Colour-coded bleed nipples provide easy identification • Bleed nipples are fitted with a six-point socket helping to prevent slipping and rounding • Silicon hose and integrated one-way valve • Supplied in a heavy-duty storage case Contents: 6 x Colour-coded spanners: 7, 8, 9, 10, 11, 12mm 1x Hose: 1,200mm (approx.) Draper Expert Pneumatic Brake Fluid Extractor Stock No. 77056 • One person operation • For use on brake fluid from hydraulic systems – especially those with complex ABS systems using a compressed air supply • Supplied with 1.5m of metal sprung suction tube and three extraction straws Draper Expert Pneumatic Fluid Extractor/Dispenser Stock No. 23248 • One person operation • For the extraction or dispensing of gearbox/ engine oils from motor vehicles, motorbikes, marine engines, generators, etc. • 6L container with trigger operation for easy use, fitted with screw valve allowing easy dispensing/extraction of fluids

Working pressure 0–30psi air supply required with 1/4" air inlet • Supplied with 1.2m of flexible rubber hose NEW Transmission and Engine Oil Filling System, 7.5L (16 Piece) Stock No. 09441 • Designed to make changing easier • Traditional pressure pump design makes it easy to operate • Each stroke provides appr 70ml with a steady a stable, reliable perf • With 15 adapters that ar suitable for most car models Draper Expert Universal Brake Bleeding Kit Stock No. 71205 • One person operation • Enables fluid to be drawn from the bleed nipple • Permits bleeding or full replacement of system on cars, vans, trucks and motorbikes • Supplied with a reservoir top-up kit £79.99 Ex. VAT £95.99 Inc. VAT £166.66 Ex. VAT £199.99 Inc. VAT £83.33 Ex. VAT £99.99 Inc. VAT £49.99 Ex. VAT £59.99 Inc. VAT £155.83 Ex. VAT £186.99 Inc. VAT Air inlet size 1/4" BSP Reservoir capacity 5L Suction tube pressure 0.8MPa Weight (empty) 2.9kg Air inlet size 1/4" BSP Air supply 70–120psi (4.8–8.3bar) Reservoir capacity 0.75L Weight (empty) 1.235kg 18 drapertools.com Vehicle Service Tools

•

Draper Expert Brake Caliper Piston Wind-Back Kit (18 Piece)

83716

Left and right-handed winders • Corrosion-resistant finish Contents: 1 x Lef t-handed winder with twin drive pins and magnetic retainer 1 x Right-handed winder with twin drive pins and magnetic retainer 1 x Universal circular piston pressure plate 1 x Universal caliper pressure plate 13 x Winder plates 1 x Twin pin winder with 3/8" square drive

Expert Semi Automatic Tyre Changer with Assist Arm

Fitted with a fully motorised turntable, pneumatically operated clamping jaws and tilt column and a powerful pneumatic bead breaker Contents: 1 x Tyre lever 1 x Tyre

1 x Filter unit 4 x Alloy rim protectors 2 x Head tongue protectors Draper Expert Semi Automatic Wheel Balancer

Stock No.

•

Draper

Stock No. 78612 •

inflator

Stock No. 91860

user-

motorised

• Semi-automatic,

friendly,

wheel balancer

the

• Supplied with calibration weight, enabling

balancing of wheels up to 24" in diameter, 65kg in weight and with an accuracy of 1 gram

• Suitable for passenger and LGV wheel/tyre combinations

Fitted with a standard 13A plug

1 x Wheel

1 x

4 x

2 x

1 x

2 x

1 x

with fixing

40mm

1 x Safety hood with fixing bolt £45.83 Ex. VAT £54.99 Inc. VAT £1,249.17 Ex. VAT £1,499.00 Inc. VAT £2,416.66 £2,899.99 Stock no.Size RRP Ex. VAT RRP Inc. VAT 23312 3/16" SAE £58.33£69.99 23313 DIN, 4.75mm £58.33£69.99 Draper Expert Hand-Held Brake Pipe Flaring Tools • Easy to use hand-held tool for quick and effective pipe flaring • Ideal for use when pipes are attached to the vehicle • Will create single and double flares • Quick clamp, split die-block with soft grip handle Max. wheel weight 65kg Max. tyre diameter 47" Rim diameter 10–24" Rim width 1.5–20" Balancing speed 200rpm Balancing accuracy 1g Power supply 220–240V Motor power 0.22kW Noise level 65dB(A) Cycle time 8–10s Max. tyre width 36" Dimensions guard open W 1,120 x H 1,550 x D 950mm Dimension guard closed W 970 x H 1,150 x D 770mm Gross weight 102kg Net weight 87kg Bead breaker force

wheel diameter 45" Motor

supply 90–115psi

Power supply

rim diameter (external locking)

For rim diameter (internal locking)

for use on wheel width

Dimensions W 1,900 x H

x D

Weight 350kg 19 drapertools.com Vehicle Service Tools

• Installation is included in the price for hassle- free set up (postcode restrictions apply – please enquire) Contents:

rim calipers

Wheel weight plier/hammer

Adjustable centring cones: 48–60, 54–72, 74–108, 89–138mm

Storage pegs for centring cones

Bolts and washer for storage pegs

Hex keys: 5, 8mm

Wheel securing locking wing nut

Adaptors

Balance shaft

bolts:

diameter

Max.

1.1kW Pneumatic

(6–8bar)

230V For

12–25"

13–26" Suitable

3–18"

1,950

1,650mm

Pneumatic/Hydraulic Motorcycle Lift, 450kg

Stock No. 37188

• Manufactured to EN 1494-2000 Specification

• All-steel construction and operates on either a heavy-duty footoperated hydraulic pump or a pneumatic pump system with controller and ram assembly

• Safety table lock device to prevent accidental lowering

• Adjustable front wheel clamp and wheel stop bar

• Removable rear panel to facilitate rear wheel changes

• Base assembly fitted with transport wheels and lock downs to prevent the lift from moving while in use

• The table surface is stippled for safety and grip while loading motorcycles

Air inlet 1/4"BSP

Capacity 450kg (1,000lb)

Closed height 180mm

Lifting range 180–815mm

Loading ramp W 600 x D 550mm

Max. height 815mm

Operating air pressure 90psi (6.2bar)

Rear wheel removal panel W 690 x D 245mm

Working height 1 540mm

Working height 2 730mm

Working table W 2,200 x D 680mm

Weight 141kg

Pneumatic/Hydraulic Motorcycle/ATV Small Garden Machinery Lift, 680kg

Stock No. 37190

• Manufactured to EN 1494-2000 Specification

• A large lift that suppor ts motorcycles plus all-terrain vehicles (ATV), mini tractors and other similar-sized vehicles, which can be accommodated by using the supplied additional side platforms for extra width

• All-steel construction with a heavy-duty foot-operated hydraulic pump or pneumatic pump-up system with controller and ram

•

• Base

•

Air inlet 1/4"BSP

Capacity 680kg (1,500lb)

Closed height 200mm

Lifting range 200–885mm

Max. height 885mm

Operating air pressure 90psi (6.2bar)

Rear wheel removal panel W 600 x D 250mm

Motorcycle loading ramp W 850 x D 150mm

Table (ATV use) W 1,950 x D1,220mm

Table (motorcycle lift) W 1,950 x D 680mm

Working height stops 550, 720, 840mm

Weight 260kg

Draper Expert Pneumatic Jack, 30 Tonne

Stock No. 03724

• Manufactured, tested and cer tified to the current EN 1494 Standard

• Twin stage pneumatic jack

• Ergonomic handle grips

• “Slow down” valve

• Self return switch

• Twin PP and rubber wheels

• Industrial seals

• Supplied with 1/4" BSP inlet and two extensions (45 and 75mm)

Capacity stage 1

30 tonne (30,000kg)

Capacity stage 2 15 tonne (15,000kg)

Min. height 150mm

Max. height stage 1 343mm (inc. extensions)

Max. height stage 2 409mm (inc. extensions)

Lifting height position 1 73mm

Lifting height position 2 66mm

Operating air pressure 130–174psi (9–12bar)

Air consumption 10.5cfm

Air inlet 1/4" BSP

Wheel diameter 165mm

Wheel width 42.5mm

Saddle diameter 70mm

Handle length 1,200mm

Chassis dimensions

W 430 x H 150 x D 176mm

Net weight 30kg

assembly

lowering

Safety table lock device to prevent accidental

Removable front wheel clamp and rear panel to facilitate rear wheel changes (motorcycles only)

assembly fitted with transport wheels and lock downs to prevent the lift from moving while in use

safety

The table surface is stippled for

and grip while

motorcycles

£958.33 Ex. VAT £1,149.99 Inc. VAT £916.66 Ex. VAT £1,099.99 Inc. VAT £1,499.99 Ex. VAT £1,799.99 Inc. VAT 20 drapertools.com Workshop Equipment

Aluminium Trolley Jack, 1.25 Tonne

Stock No. 31242

• Low profile professional jack

• Ideal for reduced clearance vehicles

• Large saddle with integrated rubber pad

• Quick-lift feature

• Manufactured to EN 1494

Specification

• Heavy-duty aluminium chassis

• Twin spring return system for lowering jack

• Supplied with a two-piece handle and EVA foam bumper to protect vehicle panels

NEW Draper Expert Low Entry Trolley Jack, 2 Tonne

Stock No. 24295

• Low profile design for ease of entry

• Integrated rubber saddle pad

• Single piston pump for fast lift using the quick-lift pedal

• Manufactured to EN 1494

Specification

• Dual-action safety lowering system

• T-shaped handle

Draper Expert Professional Garage Trolley Jack, 3 Tonne

Stock No. 01106

• Low profile professional jack

• Large saddle with integrated rubber pad

• Quick-Lift foot pedal

• Powerful twin piston quick-lift feature

• Manufactured to EN 1494

Specification

• Heavy-duty laser cut chassis

• Lowering control system (LCS)

• T-shaped handle with twospeed action

• Nylon wheels

Long Chassis Trolley Jack, 10 Tonne

Stock No. 03494

• The large saddle aids positioning

• Quick-lift foot pedal

• Manufactured, tested and cer tified to the current EN 1494 Standard

• Heavy-duty chassis

• Release knob for lowering?

• The T-shaped handle can be locked in three positions

• Release valve prevents accidental lowering

• Rear swivelling castors with toe plate increase manoeuvrability

• The safety valve prevents the jack from overloading

Draper Expert Hydraulic Bottle Jacks • Welded base • Smooth hydraulic lift

Chrome-plated pistons

•

Capacity 1.25 tonne (1,250kg) 2 tonne (2,000kg) 3 tonne (3,000kg) 10 tonne (10,000kg) Min. height85mm 75mm 95mm 170mm Max. height370mm 530mm 500mm 570mm Saddle diameter100mm 99mm 110mm 130mm Handle length930mm 1,100mm 1,100mm 1,220mm Chassis dimensions620mm 927mm 720mm 1,535mm Net weight13kg 40.75kg 40.5kg 125kg RRP Ex. VAT £137.49 £258.33 £299.99 £784.16 RRP Inc. VAT £164.99 £309.99 £359.99 £940.99 Capacity 2 tonne (2,000kg) 12 tonne (12,000kg) 50 tonne (50,000kg) Lifting range 178–347mm 238–468mm 300–482mm Hydraulic lift 117mm 150mm 165mm Ram diameter 20mm 43mm 65mm Screw extension52mm 80mm Saddle diameter20mm 43mm 64mm Handle length 325mm 650mm 800mm Weight 2.4kg 9.3kg 35.3kg RRP Ex. VAT £39.16 £104.16 £308.33 RRP Inc. VAT £46.99 £124.99 £369.99 2 Tonne Stock No. 99766 12 Tonne Stock No. 99769 50 Tonne Stock No. 99772 Full range available at drapertools.com 21 drapertools.com Workshop Equipment

•

Draper Expert Wheel Dollies (Pair)

•

• Pneumatic auto-rising feature

•

600kg

Stock No. 70668

• Hydraulic ver tical transmission jack with a telescopic ram

• Fitted with a twin-piston quick-lift facility and a safety overload valve for added user protection

• Operated via a foot pedal for hands-free operation

• Fitted with a twin-piston quick-lift facility and a safety overload valve for added user protection

• Hardwearing nylon wheels help prevent damage to garage floors, delivering a quieter and smoother operation

• Side-mounted handles aid positioning and increase manoeuvrability around the workshop or garage

• Reversible saddle accepts a wide variety of gearboxes/components

•

Max. weight (per dolly) 454kg Max. weight (per pair) 908kg Max. tyre width 300mm

1,000kg

Stock No. 19788

• Fitted with a lowering control system (LCS) which safely lowers the load into position

• Twin position quick-lif t foot pedal facility

• Nylon wheels for quieter and smoother operation and prevent damage to workshop floors

• Telescopic twin stage ram

• Low entry height

• Safety overload valve

• Twin foot pedals for hands- free operation

• Attached with chain straps and adjustable suppor ting struts

Capacity 600kg 1,000kg Min. height 1,175mm 940mm Max. height stage 11,985mm 1,430mm Max. height stage 2- 1,030mm Castor diameter75mm 75mm Base size 640 x 650mm 740 x 640mm

Chain

Stock no.Capacity (max. per stand)Capacity (per pair)Max. heightMin. height RRP Ex. VAT RRP Inc. VAT

£45.83£54.99 30883

£99.99£119.99

of Ratcheting Axle Stands Draper Expert Vertical Transmission Jacks

30881 3,000kg (SWL)6,000kg (SWL)435mm288mm

6,000kg (SWL)12,000kg (SWL)630mm400mm

Pair

Ratchet-type action

Ratcheting

10 Tonne

Large saddle Draper Expert Pair of Pneumatic Rise

Axle Stands,

Stock No. 01815

Fitted with an internal gas strut

Easily operated by activating a lever

Internal air-driven post raises saddle

Extra wide base for increased stability

Fitted with a locking pin for keeping the saddle lowered when not in use

Stock No. 23253

nylon

Each dolly has four heav y-duty white non-marking

castors

enables up

weight

Robust steel manufacture

to 454kg

to be carried on each dolly

• The

Designed to locate underneath vehicle wheels allowing precise and easy movement within confined spaces

300mm wide recess fits most vehicle tyres

D 360mm

The dimensions are

600 x H 100 x

372

Base size

x 327mm Capacity (max. per stand) 10,000kg (SWL) Capacity (per pair) 20,000kg (SWL)

Max. height 770mm Min. height 505mm £249.99 Ex. VAT £299.99 Inc. VAT £83.33 Ex. VAT £99.99 Inc. VAT

Saddle

Fixed

Weight 29kg 67kg RRP Ex. VAT £274.99 £574.99 RRP Inc. VAT £329.99 £689.99 22 drapertools.com Workshop Equipment

• Extra-large castors and side-mounted handle

length 1,495mm

type

Adjustable

Draper Expert Hydraulic Presses • Storage tray located in the base frame, which can be removed • Supplied with press pins Pallet Truck, 2.5 Tonne Stock No. 85655 • Ideal for use in warehouse envir Draper Expert Pneumatic/Hydraulic Floor Press, 50 Tonne Stock No. 35582 • A pneumatic and manual 50 tonne floor press with movable cylinder • Supplied with a pin set and two V-blocks for working on cylindrical workpieces • Fitted with two-stage working table adjustment and built-in pin set storage Capacity 2,500kg Min. fork height 85mm Max. fork height 200mm Lifting height 672mm Fork length 1,150mm Fork width 540mm Load wheel quantity 4 Steering wheel quantity 2 Load wheel size 80 x 70mm Steering wheel size 200 x 50mm Wheel material Rubber Net weight 72kg £488.33 £585.99 Bench Press, 15 Tonne Stock No. 70563 • Adjustable table heights • Manual hydraulic operation Floor Press, 30 Tonne Stock No. 70561 • Sliding ram • Rack and pinion table Capacity Max. height ram to table 780mm Min. height ram to table 80mm Overall height 1,900mm Overall width 930mm Ram stroke 215mm Table depth 200mm Table width 750mm Capacity 15 tonne 30 tonne Gauge diameter60mm 100mm Ram stroke 170mm 220mm Ram scale 145mm – 0mm – 145mm Ram diameter 50mm 50mm Table height 45–385mm 25–850mm Press pin capacity2–15 tonne 2–15 tonnes Overall height 855mm 1,800mm Frame dimensionsW 440 x H 810 x D 134mm W 600 x H 1,685 x D 148mm Net weight 56kg 157kg RRP Ex. VAT £749.99 £1,499.99 RRP Inc. VAT £899.99 £1,799.99 £2,665.83 Ex. VAT £3,199.00 Inc. VAT 23 drapertools.com Workshop Equipment

Draper Expert Hydraulic Spring Compressor Stock No. 56191 • Machine can be used on awkward Mercedes struts, including Mercedes C-Class W203 pre-2007, C-Class W204 2008–14, W205 2015–18, E-Class W207/C207 2009–18 and ML 163 and 1997–2005 • The machine can also be used on difficult VW Touareg struts without the need to purchase expensive additional adaptors

Totally adjustable and accommodates popular spring/damper suspension combinations

Safely provides access to vehicle suspension struts

Fits a wide range of spring configurations and diameters

Entirely mobile, so can be moved to the job as required

All-steel construction

Hand-operated hydraulic pump Contents: 1 x Fixing jaw: 30–70mm 3 x Yokes: 75–110, 110–140, 140–190mm Hydraulic cylinder 5,000kg Upper base travel 266mm Lower base travel 240mm Dimensions W 520 x H 1,320 x D 690mm Weight 115kg Work Stool Stock No. 54243 • Comfortable work seat with high-density foam

Fitted with four 60mm castors for improved manoeuvrability

Easy clean, oil-resistant vinyl seat cover

Built-in storage tray in the seat base Draper Expert Evolution Work Stool with Storage Stock No. 99835 • Polyurethane castors keep noise to a minimum and rotate 360° • A heavy-duty 380mm wide steel frame that’s built to last

Padded with high-density foam to ensure total comfort • Built-in tools and parts tray for convenience • Easy-to-clean oil-resistant PVC cover • Stylish Black & Evolution graphics Draper Expert Evolution Mechanic's Steel Creeper Stock No. 99834 • Black & Evolution graphics help this creeper stand out from the crowd • 500mm wide and insulated with high-density foam for superior comfort • The 360° rotating polyurethane castors deliver quiet and smooth motion • A heavy-duty frame guarantees prolonged service • Suitable for professionals or enthusiasts Mechanic's Creeper, Black Stock No. 81908 • One-piece PVC construction with six multidirectional castors • Moulded back and foam headrest for added user comfort Max. weight capacity 100kg (approx.) Seat length 370mm Seat width 220mm Seat height 380mm Foam thickness 41.5mm Wheel quantity 4 Net weight 4kg (approx.) Max. weight capacity 180kg Frame length 1,120mm Frame width 500mm Frame height 200mm Foam thickness 35mm Wheel quantity 6pcs Net weight 11kg Max. weight capacity 180kg Seat length 430mm Seat width 380mm Seat height 435mm Foam thickness 50mm Wheel quantity 4 Net weight 8.8kg Max. weight capacity 120kg (approx.) Dimensions W 1,010 x H 130 x D 475 mm £49.99 Ex. VAT £59.99 Inc. VAT £79.16 Ex. VAT £94.99 Inc. VAT £55.00 Ex. VAT £66.00 Inc. VAT £141.66 Ex. VAT £169.99 Inc. Exclusive to Draper in the UK/Eire £1,958.33 Ex. VAT £2,350.00 Inc. VAT 24 drapertools.com Workshop Equipment

•

Stock No. 24974

•

Air displacement

6.0cfm (169L/min)

Dimensions W 485 x H 550 x D 275mm

Free air delivered (FAD) 3.46cfm (98L/min)

Input current 13A

Max. pressure 116psi (8bar)

Motor 1.1kW (1.5hp)

Speed 2,850rpm

Tank size 6L Voltage 230V Weight 14kg

Air displacement 6.71cfm (190L/min)

Dimensions W 570 x H 570 x D 250mm

Free air delivered (FAD)3.53cfm (100L/min)

Max. pressure 116psi (8bar) Motor 1.1kW (1.5hp)

Sound pressure level 92dB(A)

Sound power level 96dB(A)

Speed 2,850rpm

Tank size 24L Voltage 230V Weight 21kg

Direct Drive Oiled, 50L, 1.5kW

Stock No. 24981

• Suitable for site use

• Thermal motor overload protection

• Pressure switch, regulator and gauge

• Oil level indicator

• Wheels and transport handle

Direct Drive V-Twin Oiled, 50L, 2.2kW

Stock No. 29355

• Suitable for site use

• Thermal motor overload protection

• Pressure switch, regulator and gauge

• V-twin-cylinder cast iron pump

• Two quick euro coupling outlets

• Wheels and transport handle

Direct Drive V-Twin, 100L, 2.2kW

Stock No. 65396

• Suitable for site use

• Thermal motor overload protection

• Pressure switch, regulator and gauge

• V-twin-cylinder cast iron pump

• Two quick euro coupling outlets

• Wheels and transport handle

Stationary BeltDriven, 200L, 2.2kW

Stock No. 55313

• Suitable for workshop use

• Thermal motor overload protection

• Pressure switch, regulator and gauge

• Belt-driven

• Quick euro coupling outlet

£146.66

VAT £175.99 Inc. VAT Oil-Free Air Compressor, 6L, 1.1kW

Ex.

Power and portability

emits no fumes

Motor

be transported on its side

Can

life

Long maintenance-free

regulator and gauge

Pressure switch,

outlet

Quick euro coupling

£158.32 Ex. VAT £189.99 Inc. VAT 230V Oil Free Compressor and Air Tool Kit Stock No. 90126

Lightweight and portable

Low maintenance

Euro coupling

Wheels for easy manoeuvrability Contents: 1 x Gravity-fed spray gun 1 x Paraffin/washing gun 1 x Blow gun 1 x Inflator with a clip-on hose 1 x 5m coiled air hose with 1/4" BSP female threaded connectors 1 x 5m coiled air hose

Air displacement7.3cfm (206L/min) 14.6cfm (412L/min) 14.6cfm (412L/min) 13.03 cfm (369L/min) Dimensions W 765 x H 705 x D 325mmW 770 x H 740 x D 380mmW 770 x H 740 x D 380mmW 1,580 x H 950 x D 480mm Free air delivered (FAD)4.0cfm (113L/min) 8.0cfm (227L/min) 8.0cfm (227L/min) 8.44 cfm (239L/min) Input current13A 13A 13A 13A Max. pressure116psi (8bar) 116psi (8bar) 116psi (8bar) 145psi (10bar) Motor 1.5kW (2.0hp) 2.2kW (3.0hp) 2.2kW (3.0hp) 2.2kW (3.0hp) Speed 2,850rpm 2,850rpm 2,850rpm 1,100rpm Tank size 50L 50L 100L 200L Voltage 230V 230V 230V 230V Weight 33kg 43kg 43kg 109kg RRP Ex. VAT £204.99 £316.65 £399.98 £687.48 RRP Inc. VAT £245.99 £379.99 £479.99 £824.99 Air Compressors Ideal for use with nailers Ideal for workshop or garage 25 drapertools.com Compressors & Air Tools

Operating air pressure 90psi (6.2bar) Square drive 3/8" Ultimate torque 85Nm Vibration level 4.35m/s² Weight 1.22kg

Air inlet

1/4" BSP

Average air consumption 4.4cfm (125L/min)

No-load speed 7,000 rpm Min. hose size 3/8" (10mm)

Operating air pressure 90psi (6.2bar) Square drive 1/2" Ultimate torque 813Nm Vibration level 2.8m/s² Weight 2.2kg

Air inlet

Average air consumption

Chuck size

No-load speed

Min. hose size 3/8" (10mm)

Operating air pressure 90psi (6.2bar)

Vibration level 1.0m/s² Weight 1.48kg

Hose connection 1/4" BSP thread Hose size 3/8" Max. working/burst pressure 290psi (20bar) Operating temperature -5 to 45°C £156.66 Ex. VAT £187.99 Inc. VAT Full range available at drapertools.com Draper Expert Retractable Air Hose Reel, 15m Stock No. 15050 • Rubber hose provides greater flexibility in cold conditions • Slow return function for user safety • Stops at any position for user comfort • Wall mounting on 180° swivel bracket Draper Expert Composite Body Air Impact Wrench, 1/2" Sq. Dr. Stock No. 41096 • Low noise, low vibration • Composite body makes this a lightweight but rugged tool • Reduces operator fatigue and the “cold • Rotating air inlet Pistol-Grip Digital Tyre Inflator Stock No. 91313 • The clip-on connector is compatible with most vehicles, including cars, commercial vehicles, motorbikes and trailers • The gauge is protected with a heavy-duty rubber cover • Fitted with an easy-to-read digital gauge • Supplied with a 1/4" BSP male adaptor Air Impact Wrench Kit, 1/2" Sq. Dr. (14 Piece) Stock No. 83985 • Twin hammer air impact wrench • Lightweight aluminium housing • Ergonomic soft grip handle • Three-speed reversible motor • Stored in a convenient heavy-duty storage case Contents: 1 x 1/2" Impact wrench 1 x 1/2" Extension bar: 200mm 1 x Mini oiler 1 x Air line connector 1 x Hex key: 4mm 1 x Oil pot 8 x Impact sockets: 10, 11, 13, 14, 17, 19, 22, 24mm Air Ratchet, 3/8" Sq. Dr. Stock No. 84126 • Twin ratchet paws • Stubby yoke • Teaser trigger • 360° turnable exhaust • Four speed • Middle exhaust Reversible Keyless Air Drill, 10mm Stock No. 83811 • Ergonomic rubber protective grip and auxiliary handle

Heavy-duty full caged gear system for increased tool life

Forward/reverse control feature for added precision

Quick-change keyless chuck

Rotating air inlet

Handle exhaust £104.16 Ex. VAT £124.99 Inc. VAT £36.66 £43.99 £40.83 Ex. VAT £48.99 Inc. VAT £156.04 Ex. VAT £187.25 Inc. VAT £16.99 Ex. VAT £20.39 Inc. VAT

•

Air inlet 1/4" BSP

Average air consumption 6.5cfm (184L/min) Free speed 7,000rpm Min. hose size (ID) 3/8" (10mm) Operating air pressure 90psi (6.2bar) Ultimate torque 680Nm Vibration level 4.35m/s² Weight 2.59kg

Air inlet 1/4" BSP

Average air consumption 4cfm (113L/min) No-load speed 160rpm Min. hose size 3/8" (10mm)

26 drapertools.com Compressors & Air Tools

Hose length 0.33m Pressure range 0–290psi (0–20bar) Supply inlet 1/4" BSP taper

Air inlet 1/4" BSP

Average air consumption 5cfm (141L/min)

No-load speed 10,000rpm

Min. hose size 3/8" (10mm)

Operating air pressure 90psi (6.2bar)

Orbits per minute 10,000 Pad size 150mm

Vibration level 1.5m/s² Weight 1.83kg

Disc size 100mm

No-load speed 9,000rpm

Operating air pressure 90psi (6.2bar)

Average air consumption 6.5cfm (184L/min)

Min. hose size (ID) 3/8" (10mm)

Air inlet 1/4" BSP

Overall length 180mm Weight 1.38kg Bore size 16mm

Air inlet 1/4" BSP

Average air consumption 8cfm (226L/min)

Fluid delivery rate 70–110ml/min

Fluid nozzle size 1.0mm

Operating air pressure 43psi (2bar) Weight 1.8kg

Air inlet 1/4" BSP

Average air consumption 0.28cfm (0.8L/min)

Min. hose size (ID) 3/8" (10mm)

Nail size 10–50mm, head 2mm, 18 gauge

Operating air pressure 75–100psi Shank size Width 1.25mm, thickness 1.05mm

Staple size 12–40mm, crown 5.7mm, 18 gauge

Vibration level 2.8m/s² Weight 1.45kg

Air inlet 1/4" BSP

Draper Storm Force® Air Angle Grinder, 100mm Stock No. 70832 • Adjustable safety guard • Safety trigger • Front exhaust • Low vibration sof t grip handle Draper Air Stapler/Nailer Stock No. 14609 • Quality cast aluminium housing • Attached with a nail holder and soft grip handle • Fitted with a safety bump mechanism • Safety latch mechanism • Stored in a convenient heavy-duty storage case Dual Action Sander, 150mm Stock No. 83942 • Ergonomic design with rubber protective grip • Dual action pad motion creates swirl-free finishes • Keyless pad release mechanism • Down exhaust directs air away from workpieces • Lightweight aluminium housing Gravity Feed HVLP Composite Body Air Spray Gun, 100ml Stock No. 09709 • For use with all paints • Stainless steel needle and nose • Maximum paint transfer efficiency • Minimal “bounce-back” Contents: 1 x Spray gun 1 x Cleaning brush 1 x Service spanner 1 x Cup filter 1 x Connector Air Operated Flexible Nozzle Underbody Coating Gun Stock No. 15875 • Air-powered and ideal for rustproofing vehicle chassis • 300mm flexible nozzle for accurate spraying and access to confined areas • Accepts most types of 1L coating tins • Made from lightweight aluminium Contents: 1 x Coating gun 1 x 1/4" BSP adaptor 1 x Flexible nozzle: 300mm Air Shears Stock No. 84130 • Low noise, low vibration • Lightweight aluminium housing • Cuts aluminium, plastics and 1.2mm steel • Handle exhaust £49.99 Ex. VAT £59.99 Inc. VAT £39.99 Ex. VAT £47.99 Inc. VAT £39.99 Ex. VAT £47.99 Inc. VAT £45.00 Ex. VAT £54.00 Inc. VAT £9.99 Ex. VAT £11.99 Inc. VAT £32.99 Ex. VAT £39.59 Inc. VAT Air inlet 1/4" BSP Average air consumption 5.5cfm (1,132L/min) Cutting capacity 18 gauge (1.2mm) Cutting capacity (mild steel) 18 gauge (1.2mm) Min. hose size

(10mm) Operating air pressure 90psi (6.3bar) Strokes per minute 3,200spm Vibration level 4.3m/s² Weight 1.28kg

3/8"

27 drapertools.com Compressors & Air Tools

Draper Expert Gas/Gasless MIG Welder, 250A Stock No. 71094 • Euro torch connection • Accepts 15kg spool • Full-size gas bottle support • Variable wire speed control • Thermal overload protection Contents: 1 x MIG torch (3m cable) 1 x Earth clamp 1 x Chipping hammer/wire brush 1 x Face mask Draper Expert Liquid Cooled Induction Heater, 3.5kW Stock No. 76171 • High-powered, liquid-cooled 3.5kW induction heater, ideal for industrial applications • Multifunction with three heating modes and computer-controlled • Fan-assisted cooling technology enables continuous use • Adjustable input and output power for use in low amperage environments • Dynamic power adjustments deliver maximum efficiency and speed • Fully adjustable and controllable for maximum versatility • Universal remote-control program allows linking to external analogue and digital production processes Gas/Gasless AC/DC MIG Aluminium Welder Dti, 160A Stock No. 70048 • IGBT Inver ter technology • Multi-process welder • Pulse welding • Synergic wire feed • Gas/gasless Contents: 1 x Aluminium welding MIG torch (3m cable) 1 x 200A Electrode holder 1 x 200A Earth clamp 2 x Contact tips: 1.0, 1.2mm 1 x Gas hose (2m) 1 x Chipping hammer/wire brush 1 x Face mask Amperage range 40–250A Power supply 230V 32A, 400V

Plug

No £749.17 Ex. VAT £899.00 Inc. VAT £395.83 Ex. VAT £475.00 Inc. VAT

20–160A Power supply 230V Plug fitted No (32A plug required) Electrode size 1.6–4.0mm Welding wire spool size 1kg and 5kg Duty cycle 60% @ 160A, 100% @ 120A Dimensions W 425 x H 320 x D 220mm Weight (net) 14kg IGBT tech Yes Euro torch connector/Dinse-type coupling35/50 Synergic wire feed Yes Compatible with regular gas bottle Yes Suitable for MMA welding Yes TIG-lift Yes Aluminium only Yes Pulse welding Yes Digital display Yes DTi Yes For the full range of welders, helmets and consumables, see drapertools.com Draper Tools welders marked with DTi feature additional “Digital Technology inside”. These machines work in a fundamentally different way, with settings controlled digitally by microprocessors rather than analogue buttons. The result is a more “intelligent ” machine, which can handle more settings and therefore offers more functions to the user. DTi also provides exceptional levels of control and precision and a more stable signal – all of which results in a better performing machine and a smoother, faster weld. Operating frequency 20–60kHz Output power 3kW (16A supply) Voltage supply 230V 50/60Hz Weight 14.6kg (approx.) Dimensions W 430 x H 200 x D 200mm Input power 3.5kW Liquid tank 1.5L Max. current 16A £2,832.50 Ex. VAT £3,399.00 Inc. VAT 28 drapertools.com Welders

32A Welding wire spool size 5–15kg Duty cycle 230V10% @ 165A, 30% @ 95A, 60% @ 65A Duty cycle 400V10% @ 250A, 30% @ 155A, 60% @ 100A Dimensions W 770 x H 530 x D 375mm Weight (net) 58kg Euro torch connector/Dinse-type coupling35/50 Compatible with regular gas Bottle Yes

Fitted

Amperage range

1 32287 45,000 BTU (13kW) 150W 200cfm (340m³/h) W 650 x H 330 x D 330mm 1.3L/h Up to 8,000cu. ft 20L15kg £291.65£349.99 2 32286 75,000 BTU (22kW) 125W 210cfm (350m³/h) W 650 x H 330 x D 330mm 2.1L/h Up to 10,000cu. ft 20L15kg £320.82£384.99 3 53926 75,000 BTU (22kW) 125W 210cfm (350m³/h) W 650 x H 330 x D 330mm 2.1L/h Up to 10,000cu. ft 20L20kg

Jet Force Diesel and Kerosene Space Heaters 230V Diesel and Kerosene Space Heaters

Suitable for well-ventilated spaces

Automatic ignition

safety device

fuel filter • Fitted with a compressor pump for high efficiency • Heats quickly and evenly and offers great fuel economy • Made from high-quality steel with a protective gloss black powder-coated finish • Suitable for use in open and semi-open environments such as workshops, garages, factories and job sites Ref Stock No. Max. heat output Motor Airflow Dimensions Max. fuel consumption Suggested heating area Tank capacity Weight (approx.) RRP Ex. VAT RRP Inc. VAT

£541.66£649.99 6 53925 215,000 BTU (62kW) 271W 614cfm (1,044m³/h) W 1,030 x H 550 x D 430mm 6.2L/h Up to 35,000cu. ft 50L31kg £558.32£669.99 Ref Stock No. Max. heat output Motor Airflow VoltageDimensions Max. fuel consumption Approx. run time (per tank) Tank capacity WeightFrame RRP Ex. VAT RRP Inc. VAT 7 04174 50,000 BTU (15kW) 200W400m³/h230V W 700 x H 430 x D 310mm 1.4L/h13 hours19L15kg Carry handle £249.99£299.99 8 04175 68,000 BTU (20kW) 255W450m³/h230V W 840 x H 490 x D 390mm 1.87L/h10 hours19L15.5kg Steel frame with wheels £284.99£341.99 9 04176 100,000 BTU (30kW) 255W600m³/h230V W 950 x H 480 x D 590mm 2.8L/h10 hours33L24kg Steel frame with wheels £329.99£395.99 1 7 2 8 3 9 4 6 29 drapertools.com Heating

•

• Photocell

• In-line

£381.25£457.50 4 32285 125,000 BTU (36kW) 215W 450cfm (760m³/h)

890 x H 660 x D 360mm 3.6L/h Up to 15,000cu. ft 40L26kg £429.98£515.99 5 32284 175,000 BTU (51kW) 230W 514cfm (874m³/min)

970 x H 660 x D 420mm 5L/h Up to 28,000cu. ft 50L30kg

Jet Force Infrared Diesel and Kerosene Space Heater, 60,000 BTU/17 kW Stock No. 17111 • Suitable for well-ventilated spaces • Photocell safety device and overheating protection • Operates on both kerosene and diesel Jet Force Infrared Diesel Space Heater, 124,000 BTU/34 kW Stock No. 01774 • Powerful infrared heater suitable for well-ventilated spaces • Automatic ignition • Photocell safety device with heat protection £501.99 Ex. VAT £602.39 Inc. VAT £999.99 Ex. VAT £1,199.99 Inc. VAT Dimensions W 560 x H 560 x D 330mm Max. fuel consumption 1.39L/h Max. heat output 60,000 BTU (17kW) Motor 94W Tank capacity 12L Weight (approx.) 16kg Dimensions W 630 x H 860 x D 730mm Max. fuel consumption 2.6L/h Max. heat output 124,000 BTU (34kW) Motor 94W Tank capacity 40L Weight (approx.) 42kg 230V Far Infrared Diesel Heaters with Flue Kit • Low noise and heats evenly in all directions • Comes with a remote control for ease of operation • Thermostatically controlled with easy to use control panel and digital display • Supplied with flue kit for a more permanent installation, and it can be used in well-ventilated areas such as garages, barns, workshops, warehouses and marquees Ref Stock No. Max. heat output Rated input VoltageDimensions Max. fuel consumption Tank capacity Weight (net) Fuel RRP Ex. VAT RRP Inc. VAT 1 18037 40,000 BTU/11.6kW40W230VW 710 x H 1,110 x D 320mm0.9L/h25L40kgDiesel £1,599.00£1,918.80 2 18070 51,500 BTU/15.1kW50W230VW 920 x H 1,110 x D 320mm1.2L/h30L47kgDiesel £1,725.00£2,070.00 3 18104 67,500 BTU/19.8kW50W230VW 1,235 x H 1,110 x D 320mm1.7L/h45L58kgDiesel £1,875.00£2,250.00 1 2 3 30 Heating drapertools.com

•

Jet Force Propane Space Heaters

•

• Thermal overload sensor

• Manual piezo ignition

•

1 47063 34,000 BTU (10kW)30W177cfm (300m³/h)W 425 x H 352 x D 240mm0.74kg/hUp to 4,000cu. ft4.6kg

47100 50,000 BTU (15kW)30W177cfm (300m³/h)W 495 x H 325 x D 240mm1.11kg/hUp to 5,000cu. ft5.1kg

47101 102,000 BTU (30kW)80W441cfm (750m³/h)W 545 x H 325 x D 260mm2.20kg/hUp to 13,0000cu. ft6.3kg £141.65£169.99 4 47105 136,000 BTU (40kW)80W441cfm (750m³/h)W 595 x H 370 x D 260mm2.90kg/hUp to 23,000cu. ft6.8kg £158.32£189.99

Injector size

1.0mm

Normal gas pressure 37mbar

Gas type G31

Heat output (low–high) 3–4.5kW

Rated output (low–high)10,250–15,354 BTU

Fuel consumption (low–high) 0.22–0.33kg/h

Heating area (low–high) 20–80m² Weight 2.2kg

Injector size

1.0mm

Normal gas pressure 37mbar

Gas type G31

Heat output (low–high) 3–4.5kW

Rated output (low–high)10,250–15,354 BTU

Fuel consumption (low–high) 0.22–0.33kg/h

Heating area (low–high) 20–80m²

Weight 1.8kg

Inc. VAT

VAT

£54.16 Ex. VAT £64.99

£49.99 Ex.

£59.99 Inc.

High-performance burner assembly

Thermocouple with solenoid valve

Supplied with a 1.5m gas hose and regulator

outputMotor Airflow Dimensions

consumption Suggested heating area

(approx.) RRP Ex. VAT RRP Inc. VAT

Ref Stock No. Max. heat

Max. gas

Weight

£99.98£119.99

Free-Standing Propane Space Heater, 15,354 BTU/4.5kW Stock

• Steel

•

Contents: 1 x

1 x

Bottle-Mounted Propane Space Heater, 15,354 BTU/4.5kW Stock

• Steel

•

Contents: 1 x Propane space heater 1 x Hose and

regulator: 700cm Heating drapertools.com 31

£108.32£129.99 3

1 2 3 4

No. 07867

tubular stand

Heater angle adjustment

Adjustable output control

Grade A ceramic plates • Hose connector, regulator and 1.5m hose

Propane space heater

Hose and gas regulator: 1.5m

No. 07866

tubular bottle clamp

Heater angle adjustment • Adjustable output control

Grade A ceramic plates • Hose connector, regulator and 700cm hose

gas

230V Electric Space Heater, 2kW PTC Stock No. 06729 • Heat efficiency PTC element • Two heat settings • Adjustable capillary thermostat • Overload safety protection • Heater angle adjustment £32.99 Ex. VAT £39.59 Inc. VAT Voltage 230V Dimensions W 185 x H 240 x D 170mm Max. wattage 2,030W Heat output 2kW/6,800 BTU Heating area 20m² Power cable 1.3m Weight 1.5kg NEW PTC Electric Space Heaters • A powerful, energy-efficient PTC electric space heater suitable for use in industrial settings • The PTC ceramic heating element delivers fast, safe heat production • Two heat settings and fan mode available and an adjustable thermostat to set and maintain room temperatures • Thermal overheat protection • Tubular stand with angle adjustment 1 2 3 Ref Stock No.SupplyDimensions Power Heat outputHeated areaAir outputCable lengthWeight 1 04566 230V 13AW 310 x H 290 x D 215mm1,400/2,800W9,554 BTU32m³514m³/h1.5m 2.85kg 2 04568 400VW 300 x H 345 x D 235mm3,300/5,000W17,060 BTU48m³774m³/h1.5m 4.32kg 3 04570 400VW 395 x H 455 x D 307mm6,000/9,000W30,708 BTU80m³1,198m³/h1.5m 6.9kg 4 04565 230V 13AW 370 x H 685 x D 240mm1,000/2,000W6,824 BTU20m³260m³/h1.5m 1.65kg COMING SOON! 32 drapertools.com Heating

•

Contents:

20 x Metric dies: 6 x 1.0, 6 x 0.25, 8 x 1.25, 8 x 1.0, 10 x 1.25, 10 x 1.5, 12 x 1.5, 12 x 1.75, 14 x 1.5, 14 x 2.0, 16 x 1.5, 16 x 2.0, 18 x 1.5, 18 x 2.5, 20 x 1.5, 20 x 2.5, 22 x 1.5, 22 x 2.5, 24 x 1.5, 24 x 3.0mm

20 x Metric taps: 6 x 1.0, 6 x 0.25, 8 x 1.25, 8 x 1.0, 10 x 1.25, 10 x 1.5, 12 x 1.5, 12 x 1.75, 14 x 1.5, 14 x 2.0, 16 x 1.5, 16 x 2.0, 18 x 1.5, 18 x 2.5, 20 x 1.5, 20 x 2.5, 22 x 1.5, 22 x 2.5, 24 x 1.5, 24 x 3.0mm

Draper Expert Bench Drill Stock No. 95314 • Designed for engineering and fabrication workshops NEW Draper Expert Adjustable Thread Restorer Stock No. 03333 • For quick and easy restoration of damaged threads • Twin angled HSS steel blades • Automatically chases good t and the cutter repairs damaged threads • For metric thread sizes from M4 to M45 Variable Speed Metal Work Lathe, 250W Stock No. 33893 • Capable of cutting metric gears • Variable speed reversible drive and powered cutting facility for right and left-hand threads • No-volt switch to prevent accidental switch on • Supplied with self-centring three-jaw chuck and approved plug Heavy Duty Bench Grinder with Worklight, 200mm, 550W Stock No. 05097 • Fitted with worklight • Coarse and fine grinding wheels • Adjustable eye protection shields, spark deflectors, wheel guards and tool rests • Supplied with grinding wheel dresser and storage tray Engineers Bench Vice, 150mm Stock No. 45232 • Quality cast iron body with steel screw and handle • Hardened carbon steel interchangeable jaws £49.99 Ex. VAT £59.99 Inc. VAT £103.33 Ex. VAT £123.99 Inc. VAT £949.99 Ex. VAT £1,139.99 Inc. VAT £149.99 Ex. VAT £179.99 Inc. VAT £117.49 Ex. VAT £140.99 Inc. VAT Centre turning capacity 300mm Chuck capacity 80mm Cross slide travel 65mm Diameter turning capacity 180mm High spindle speed 100–2,500rpm Low spindle speed 100–1,100rpm Overall length 770mm Spindle bore 20mm Weight 42kg Bore 15.8mm Grinding wheel diameter 200mm Speed 2,850rpm Width/face 25mm Weight 19kg Dimensions W 76 x H 80 x D 22mm Grip 19.5mm Ø Weight 30g Metric Tap and Die Set (45 Piece)

Stock No. 18523

Manufactured from alloy steel

Suitable for cleaning and cutting threads on mild steel and aluminium

Packed in a blow-moulded case

1 x Tap wrench 1 x T-type tap wrench 1 x Die holder 1 x Die adaptor 1 x Screwdriver Floor Standing Drill Stock No. 02019 • Ideal for automotive and maintenance workshops Base size 460 x 275mm 485 x 290mm Chuck capacity 3–16mm 3–16mm Collar diameter 60mm 60mm Column diameter 80mm 80mm Drilling capacity 19mm 25mm Height 1,000mm 1,635mm Speed 16 (120–3,000rpm) 16 (160–3,000rpm) Spindle taper MT2 MT4 Spindle travel 80mm 80mm Table size 290 x 290mm 356 x 356mm Throat depth 178mm 255mm Weight 71kg 86kg RRP Ex. VAT £529.99 £599.99 RRP Inc. VAT £635.99 £719.99 16 Speed Drills • Heavy-duty 16-speed drill • Square table • Smooth running rack and pinion • Fitted with a no-volt safety release switch, depth stop and chuck guard • Supplied with a BS approved non-rewireable moulded plug and 1.8m (approx.) cables 33 drapertools.com Engineering

• Quick clamp chuck

• Aluminium base

Stock No. 84708

• Ideal for workshop use • Large rear wheels, perfect for transporting to and from different work sites • Large extension table can be fitted to the side or the rear of the saw

• Front locking rip fence and rise and fall tilt blade

• Supplied with a 40T TCT blade, mitre guide, dust extraction hose and push stick

Blade diameter 315mm Bore 30mm

Max. cutting depth at 45° 46mm Max. cutting depth at 90° 85mm Overall table length (with ext.) 1,600mm Speed 2,950rpm Work table 800 x 550mm Work table extension 800 x 400mm Weight 54kg

Plunge Saw with Rail, 165mm, 1200W

Stock No. 57341

• Maximum cutting depth of 55mm at 90° and 42mm at 45° • 0–45° bevel cutting base

• Includes two 700mm guide rails with anti-slip grips • Features include a dust extraction fitting, electronic brake and spindle lock

• Supplied with a 24T blade and a 2m cable with BS plug

• Stock No. 98041 (1 x 1.4m rail) and Stock no. 98199 (2 x 0.7m rails) available separately

34 Draper Expert 230V Orbital

Jigsaw, 600W Stock No. 70012

• Four pendulum settings

1 x 115mm HCS

ing blade 1 x Parallel guide 1 x Dust extraction adaptor 1 x Hex key

• Six variable speed options • 0–45° bevel cutting Contents:

wood cutt

Contractor's Saw, 315mm, 2000W

£74.99 Ex. VAT £89.99 Inc. VAT £134.99 Ex. VAT £161.99 Inc. VAT £449.99

£539.99 Inc. VAT

Ex. VAT

Voltage 230V Power 600W No-load speed 500–3,000spm Max. stroke length 24mm Max. cutting depth 80mm (wood), 10mm (metal) Weight 2.6kg Bore 20mm No-load speed 0–5,200rpm Supplied in case No Voltage 230V Wattage 1,200W Weight 5.8kg

drapertools.com Woodowrking

Draper Storm Force®

Bandsaw, 200mm, 250W

Stock No. 98471

• Adjustable blade tensioning and tracking for cutting

• Mitre guide for crosscut work and graduated to 30° for both left and right hand angles

• Table tilting with 0–45° range

• Fitted with a no-volt on/off switch and 100mm dust extraction outlet

Bandsaw, 305mm, 750W

Stock No. 84714

• Two-speed operation control

• Adjustable blade tensioning and tracking for precise cutting

• Mitre guide for crosscut work and graduated to 30° for both left and righthand angles

• Table tilting with 0–45° range

• Fitted with an LED worklight and convenient tool drawer in the base unit

• For angled cutting, ripping, mitre and bevel cutting

• Fitted with a cable and approved plug

• Can be bench mounted or fitted to a stand (available separately)

Bandsaw, 340mm, 1100W

Stock No. 84715

• Two-speed operation control

• Adjustable blade tensioning and tracking for precise cutting

• Mitre guide for crosscut work and graduated to 30° for both left and righthand angles

• Table tilting with 0–45° range

• Fitted with an LED worklight and convenient tool drawer in the base unit

• For angled cutting, ripping, mitre and bevel cutting

• Fitted with a cable and approved plug

• Supplied with blade, mitre gauge, rip fence and dust extraction outlet

Voltage 230V 230V 230V Frequency 50Hz 50Hz 50Hz Input 250W 750W 1,100W No-load speed1,400rpm 1,400rpm 1,400rpm Max. throat capacity200mm 305mm 340mm Cutting depth80mm 165mm 225mm Max. capacity85mm 172mm 205mm Cutting speed(s)15m/sec (900m/min) 6.16, 13.33m/s 6.16, 13.33m/s Table size 300 x 360–520mm 390 x 480mm (tilt to 45°) 545 x 515mm (tilt to 45°) Bandsaw dimensionsW 335 x H 685 x D 250mm W 750 x H 1,170 x D 520mm W 850 x H 1,297 x D 650mm Weight 15kg 57kg 74kg Contents 1 x 7tpi Blade 1 x Parallel rip fence 1 x Open-ended spanner 1 x Flat head screwdriver 1 x Push stick 2 x Hex keys 1 x 4tpi Blade 1 x Parallel rip fence 1 x Open-ended spanner 1 x Push stick 4 x Hex keys 4 x Pan head screws: M7 x 12mm 4 x Washers: 8.5mm 4 x Plastic wing bolts 1 x 4tpi Blade 1 x Parallel rip fence 1 x Open-ended spanner 1 x Push stick 4 x Hex keys 4 x Pan head screws: M7 x 12mm 4 x Washers: 8.5mm 4 x Plastic wing bolts RRP Ex. VAT £179.99 £749.99 £859.99 RRP Inc. VAT £215.99 £899.99 £1,031.99 35 drapertools.com Woodworking

•

Sliding Compound Mitre Saw with Laser Cutting Guide, 210mm, 1500W Stock No. 83677

Cast aluminium table and base

Laser beam cutting guide

Integral dust extraction outlet and bag

Depth stop Sliding Compound Mitre Saw, 255mm, 1800W Stock No. 90170

Laser beam cutting guide

Aluminium base • 0–45° bevel cutting

•

Workpiece clamp

Extension wings for cutting larger workpieces Draper Expert Double Bevel Sliding Compound Mitre Saw, 305mm, 2000W Stock No. 79901

Double bevel feature

Enables mitre, bevel and compound cuts

Integral dust extraction

Extension wings

Stop bar and depth stop

Vice clamp

Laser cutting guide Bevel cut (L)35 x 220mm 38 x 305mm 40 x 315mm 60 x 340mm Bevel cut (R) N/A 38 x 305mm 38 x 315mm 40 x 340mm Blade diameter210mm (8.27") x 2.4mm (24T)255mm x 40T 255mm (10") 305mm (12") Bore 30mm 30mm 30mm 30mm Compound cut (L)35 x 155mm 38 x 210mm 40 x 215mm 60 x 235mm Compound cut (R) N/A 38 x 210mm 26 x 215mm 40 x 235mm Cross cut70 x 220mm 75 x 305mm 90 x 315mm 105 x 340mm Mitre cut70 x 155mm 75 x 210mm 90 x 215mm 105 x 235mm Power 1,500W 1,800W 2,000W 2,000W Speed 4,500rpm 5,000rpm 5,500rpm 4,500rpm Weight 10.5kg 14kg 18kg 21.3kg Contents1 x Hex key 1 x Collection bag 1 x 24T TCT saw blade 1 x Hex key 1 x Collection bag 1 x 40T TCT saw blade 1 x Hex key 1 x Collection bag 1 x 40T TCT saw blade 1 x Hex key 1 x Collection bag 1 x 60T TCT saw blade RRP Ex. VAT £179.99 £216.66 £315.99 £359.99 RRP Inc. VAT £215.99 £259.99 £379.20 £431.99 Visit drapertools.com for a full range of woodworking essentials Draper Expert Double Bevel Sliding Compound Mitre Saw, 255mm, 2000W Stock No. 79899 • Laser cutting guide

Aluminium base • 0–45° double bevel feature

Workpiece clamp

•

Extension wings for cutting larger workpieces

Integral dust extraction

Enables mitre, bevel and compound cuts

Stop bar and depth stop 36 Woodworking

Compact Digital Variable Speed Wood Lathe, 550W Stock No. 60989 • Digital display fitted on to the headstock

Variable speed motor

Heavy-duty cast iron bed

Supplied with 80mm faceplate and 150mm tool rest

Ideal for use on a workbench Variable Speed Wood Lathe with Digital Display, 750W Stock No. 60990

Powerful variable speed 750W motor

Fully reversible and rotating headstock

Cast iron construction

Ten speeds

Digital display

Supplied with 150mm faceplate, 300mm tool rest and four-prong drive centre Centre turning capacity457mm 1,100mm Diameter turning capacity305mm 360mm Speeds (variable) 650–3,800rpm 500–2,000rpm Spindle taper MT1 MT1 Spindle thread 3/4" 3/4" Weight 32kg 92kg RRP Ex. VAT £445.83 £783.33 RRP Inc. VAT £535.00 £939.99 230V Belt, 100mm and Disc Sander, 200mm, 500W Stock No. 98525 • The sanding belt can be adjusted 0–90° with a horizontal or vertical standing • 0–45° adjustable disc worktable with mitre gauge • Dust extraction outlet • No-volt switch for safety Contents: 1 x Sanding belt: 100 x 914mm 1 x Disc: 200mm (8") Draper Expert 230V Belt and Disc Sander with Tool Stand, 150mm, 750W Stock No. 98423 • Horizontal or vertical belt standing • Adjustable angle table with mitre gauge • Two dust extraction outlets • Supplied with a four-legged tool stand Contents: 1 x Four-legged tool stand 1 x Sanding belt: 150 x 1,220mm 1 x Disc: 230mm (9") £469.99 Ex. VAT £563.99 Inc. VAT Voltage 230V Power 500W Weight 21.5kg Dimension W 540 x H 370 x D 325mm Belt tilt 0–90° Tilt disc 0–45° Disc table size 150 x 264mm Belt size 100 x 914mm Belt speed 9.2m/s No-load speed (disc) 2,850rpm Voltage 230V Power 750W No-load speed 2,950rpm Belt speed 9.2m/s Belt size 100 x 914mm Disc diameter 200mm Disc table size 150 x 264mm Tilt 0–450 Dimension W 540 x H 370 x D 325mm Weight 21.5kg 37 drapertools.com Woodworking

•

NEW Draper Expert 230V Oscillating Spindle Sander, 370W Stock No. 98427 • Cast iron table construction • 0–45° table tilting section • Bench-mounted or used floor standing a compatible stand is available separately (Stock No. 98428) • With a 50mm dust extraction port • Onboard storage for accessories Contents: 1 x Oscillating spindle sander 3 x Sanding sleeves and drums: 50 x 140, 38 x 140, 19 x 90mm 6 x Table inserts Draper Expert Soft Grip Wood Chisel Kit, 140mm (8 Piece) Stock No. 88605 • Chisels have full-length bevel edged blades manufactured from chrome vanadium steel that is hardened, tempered, finely ground and clear lacquer coated for corrosion protection • Impact-resistant soft grip polypropylene handles Contents: 6 x Chisels: 6, 12, 20, 26, 32, 38mm 1 x Honing guide 1 x Sharpening stone Oscillating Spindle Sander, 450W Stock No. 10773 • Dust extraction facility • Fitted with a cable and non-rewireable BS-approved plug. Contents: 5 x Bobbin drums 6 x Plastic table inserts 6 x 110mm Sanding sleeves: 12.7, 19.05, 25.4, 38.1, 50.8, 76.2mm Twin Height Heavy Duty Fold Down Workbench, 650mm Stock No. 38121 • Twin height settings for user convenience • Manufactured with two-piece MDF worktop and quick-release jaw • Angled steel legs fitted with anti-slip feet • Dual clamping action and 12 clamping dog holes • Maximum clamping width with clamping dogs of 380mm • Supplied with four plastic clamping dogs • Easily folds away for secure storage and portability • Weight 13kg (approx.) • Blade is manufactured from high-quality 1mm-thick SK5 steel • Correctly hardened, tempered, straightened and stress relieved to ensure the blade's strength and straightness • Tooth design delivers faster cutting with optimal sawdust removal in both the forward and reverse actions • Finely ground blade surface is coated with ultra-tough lacquer, helping protect the blade from corrosion while also easing friction when sawing • Ergonomic handle has a soft grip, ensuring user comfor t even when used for prolonged periods £166.66 Ex. VAT £199.99 Inc. VAT £83.33 Ex. VAT £99.99 Inc. VAT £41.66 Ex. VAT £49.99 Inc. VAT £6.24 Ex. VAT £7.49 Inc. VAT £404.17 Ex. VAT £485.00 Inc. VAT Bobbin height (max.) 115mm Bobbin working height (max.) 110mm Oscillations 58opm Oscillation travel 16mm Table size 370 x 290mm Weight 13kg Voltage 230V Power 370W Tilt 0–45° Table size 370 x 370mm Oscillating stroke 24mm No-load speed 1,500rpm Dust extraction port 50mm Dimensions W 370 x H 670 x D 370mm Weight 28.5kg Draper Venom® First Fix Double Ground Handsaw, 500mm, 7tpi/8ppi Stock No. 82194 38 drapertools.com Woodworking

Pressure Washer, 1600W, 135bar

Stock No. 98676

Power 1,600W

Working pressure (±10%)1,305psi (90bar)

Max. pressure (±10%)1,958psi (135bar)

Working flow (±10%) 5.5L/min Max. flow (±10%) 7.1L/min

Hose length 5m Cable length 5m Weight 8kg

Pressure Washer, 2200W, 165bar

Stock No. 98677

Power 2,200W

Working pressure (±10%) 1,595psi (110bar)

Max. pressure (±10%) 2,393psi (165bar)

Working flow (±10%) 6.3L/min Max. flow (±10%) 8.2L/min

Hose length 6m Cable length 5m Weight 11kg

Pressure Washer, 2100W, 165bar

Power 2,100W

Working pressure (±10%)1,595psi (110bar)

Max. pressure (±10%)2,393psi (165bar)

Working flow (±10%) 6.0L/min

Max. flow (±10%) 7.2L/min

Hose length 6m Cable length 5m Weight 18kg

Pressure Washer, 2500W, 195bar

Stock No. 98679

Power 2,500W

Working pressure (±10%) 1,885psi (130bar) Max. pressure (±10%) 2,828psi (195bar)

Working flow (±10%) 6.7L/min Max. flow (±10%) 8.0L/min

Hose length 8m Cable length 5m Weight 25kg

Draper Expert Petrol Pressure Washer, 6.5HP

Stock No. 83818

1 x

• Auto control with total stop device Contents: 1

Pressure washer 1

Spray gun 1

Fixed brush 1

6m High-pressure hose

Turbo nozzle

Integrated detergent bottle

Cleaning pin

x Inlet filter

•

6 x

• Brushless induction motor

Auto control with total stop device Contents: 1

Pressure washer 1

Spray gun with stainless steel lance 1

Fixed brush 1 x 8m Steel armoured hose 1

Patio cleaning attachment

Nozzles (including turbo nozzle) 1

Integrated detergent bottle

x Cleaning pin 1 x Inlet filter

•

6 x

1 x

Stock No. 98678 • Brushless induction motor

Auto control with total stop device Contents: 1

Pressure washer 1

Spray gun with stainless steel lance 1

Fixed brush 1

6m High-pressure hose 1

Patio cleaning attachment

Nozzles (including turbo nozzle)

Integrated detergent bottle

Cleaning pin

Inlet filter

• Auto control with total stop device

1 x

Contents: 1

Pressure washer 1

Spray gun 1

Fixed brush 1

5m High-pressure hose

Turbo nozzle

Detergent bottle

Cleaning pin

Inlet filter

• For use where no mains power is available • Four-stroke petrol engine Contents: 1 x Pressure washer, 1 x 8m High-pressure hose, 1 x Heavy-duty spray gun, 1 x Metal spray lance, 1 x Detergent tank, 1 x 1/4" Hose adaptor, 5 x Nozzles, 1 x Fuel funnel with hose Draper Expert Petrol Pressure Washer, 13HP Stock No. 83819 • For use where no mains power is available • Brass pump head with pressure regulator • Four-stroke petrol engine Contents: 1 x Pressure washer, 1 x 10m High-pressure hose, 1 x Heavy-duty spray gun, 1 x Metal spray lance, 1 x 1/4" Hose adaptor, 5 x Nozzles, 1 x Fuel funnel with hose £174.98 Ex. VAT £209.99 Inc. VAT £349.98 Ex. VAT £419.99 Inc. VAT £249.99 Ex. VAT £299.99 Inc. VAT £99.99 Ex. VAT £119.99 Inc. VAT

Displacement 196cc Engine 6.5hp Flow rate 7.9L/min (474L/h) Max. pump pressure2,700psi (186bar) No-load speed 3,350–3,550rpm Weight (dry) 30kg Working pump pressure2,430psi (168bar) Displacement 389cc Engine 13hp Flow rate 12L/min (720L/h) Max. pump pressure3,800psi (262bar) No-load speed3,350–3,550rpm Weight (dry) 55kg Working pump pressure3,400psi (234bar) £373.75 Ex. VAT £448.50 Inc. VAT £790.83 Ex. VAT £949.00 Inc. VAT E10 COMPATIBLE E10 COMPATIBLE 39 drapertools.com Pressure Washers, Water Pumps & Generators

Submersible Dirty Water Pump with Float Switch, 416L/min, 1300W Stock No. 98919

For heavy-duty use and ideal for irrigation and clearing ditches

Maximum particle size aper ture

Fitted with a ceramic shaf t and thermal overload protection • The float switch automatically cuts the pump off when the water level has dropped

Supplied with 50mm diameter hose adaptor, 10m (approx.) cable and approved plug Draper Expert Petrol Trash Water Pump, 750L/min, 7HP Stock No. 16128 • For pumping water in locations where mains power is not available • Self-priming, and the engine has an easy pull start • Ideal for pumping out footings, flooded premises and large ponds • The extra wide diameter outlet aperture allows the pumping of solids and waste up to 27mm diameter • Heavy-duty tubular steel frame with coated finish Contents: 2 x Metal hose couplings 1 x Suction filter 1 x Box spanner Draper Expert Petrol Generator with Wheels, 4000W Stock No. 23984 • Powered by a four-stroke engine • Recoil and electric start • Steel tubular frame with polyester-coated finish • Dual voltage output 110/230V and 12V DC output • Fitted with oil and fuel-resistant anti-vibration mounts and has two large, robust rubber wheels for ease of mobility Contents: 1 x Petrol generator 1 x Spark plug wrench 1 x Screwdriver 1 x 12V Charging lead and storage bag £120.99 Ex. VAT £145.20 Inc. VAT £377.99 Ex. VAT £453.59 Inc. VAT £749.99 Ex. VAT £899.99 Inc. VAT Float switch Yes Hose adaptor diameter 50mm Max. head height 11m Max. output 416L/min Max. particle diameter 38mm Motor 1,300W Output aperture diameter 50mm Voltage 230V Weight 7.7kg Engine 389cc Petrol Fuel tank 25L Dimensions W 710 x H 570 x D 560mm Weight 89kg Rated output 3,500W Max. output 4,400W Noise 97dB(A) at 4m Continuous runtime 9 hours at 75% load Sockets 110V 16A, 230V 16A, 110V 32A, 12V DC Displacement 196cc Engine 7hp

Fuel

Max.

Max. output 750L/min Output aperture diameter 75mm Start recoil Suction aperture 75mm Weight 35kg E10 COMPATIBLE E10 COMPATIBLE 40 drapertools.com Pressure Washers, Water Pumps & Generators

•

(four-stroke)

tank capacity 3.6L

head height 26m

head height (suction) 7m

D20 20V Brushless Impact Driver, 1/4" Hex, 180Nm, 2 x 2.0Ah Batteries, 1 x Charger Stock No. 86958 • Brushless motor • Quick-release chuck • Super bright LED worklight • Variable speed control with electronic brake • Supplied in a tough carry case Contents: 1 x Impact driver 2 x 2.0Ah Batteries 1 x Charger D20 20V Brushless Combi Drill, 1 x 4.0Ah Battery, 1 x Fast Charger Stock No. 79894 • Built with brushless technology for efficient runtime • Designed with a two-speed gearbox and 23 torque settings • LED worklight • Metal keyless chuck • Adjustable side handle and depth rod • Supplied in a tough carry case Contents: 1 x Combi drill 1 x 4.0Ah Battery 1 x Fast charger £152.99 Ex. VAT £183.59 Inc. VAT £178.99 Ex. VAT £214.79 Inc. VAT Battery D20 20V Li-ion Batteries per item 2 x 2.0Ah Charger type 1.65A Impact rate 0–3,300bpm Max. torque 180Nm No-load speed 0–2,200rpm Supplied in case Yes Variable speed Yes Weight (bare tool) 1.1kg Quick-release chuck 1/4" Battery D20 20V Li-ion Batteries per item 1 x 4.0Ah Charger type 4A Chuck capacity 13mm (1/2") Drilling capacity (steel) 13mm Drilling capacity (wood) 35mm Impact rate 29,700bpm Max. torque 60Nm No-load speed 0–500rpm Supplied in case Yes Weight (bare tool) 1.4kg Discover the D20 Range - Reliable power tools with an interchangeable battery system that allows you to use the same battery and charger with any of the tools in the D20 series XP20 20V Brushless High-Torque Impact Wrench Kits

High-performance brushless motor

Intelligent SCB technology

Fibreglass reinforced housing

Compact 225mm length

Four speed/torque settings, including smart reverse to stop impact and slow rotation when the bolt/nut is loosened

Super bright LED worklight

Variable speed control with electronic brake • Supplied with a tough carry case fitted with metal clasps Contents: 1 x 20V Impact wrench 2 x 4.0Ah Batteries 1 x Fast charger 3/4", 1060Nm Stock No. 98961 1/2" Sq. Dr., 1000Nm Stock No. 98960 Battery XP20 20V Li-ion XP20 20V Li-ion Batteries per item2 x 4.0Ah 2 x 4.0Ah Charger type Fast Fast Impact rate 0–2,400bpm 0–2,400bpm Max. torque 1,000Nm 1,060Nm No-load speed0–1,900rpm 0–1,800rpm Square drive 1/2" 3/4" Supplied in case Yes Yes Variable speed Yes Yes Weight (bare tool)3.3kg 3.3kg RRP Ex. VAT £340.00 £340.00 RRP Inc. VAT £408.00 £408.00 41 drapertools.com Power Tools & Accessories

•

D20 20V Brushless SDS+ Rotary Hammer Drill, 2 x 2.0Ah Batteries, 1 x Charger Stock No. 00592 • Brushless motor • Four functions: drill, hammer, chisel and chisel lock • Variable speed control • Adjustable side handle with depth rod and 10mm standard chuck adaptor • LED worklight • Supplied in a tough carry case Contents: 1 x SDS+ rotary hammer drill 2 x 2.0Ah Batteries 1 x Charger D20 20V Brushless Reciprocating Saw, 1 x 3Ah Battery, 1 x Fast Charger Stock No. 00593 • Brushless motor • Pendulum action • Stroke length is 28mm • Quick-change blade system • Includes wood and steel blades Contents: 1 x Brushless Recipr 1 x 3.0Ah Battery 1 x Fast Charger £183.33 Ex. VAT £219.99 Inc. VAT £165.99 Ex. VAT £199.20 Inc. VAT Battery D20 20V Li-ion Batteries per item 2 x 2.0Ah Charger type 1.65A Drilling capacity (masonry) 22mm Drilling capacity (steel) 13mm Drilling capacity (wood) 28mm Impact joules 1.7J Impact rate 0–4,500bpm Max. torque 135Nm Supplied in case Yes Weight (bare tool) 2.2kg Max. no-load speed 0–1,400rpm Battery D20 20V Li-ion Batteries per item 1 x 3Ah Charger type 4A Cutting capacity (mild steel) 20mm Cutting capacity (wood) 200mm No-load speed 0–3,000rpm Supplied in case No Weight (bare tool) 2.2kg D20 20V Brushless Circular Saw, 1 x 3Ah Battery, 1 x Fast Charger Stock No. 00594 • Brushless motor • Electronic brake • Aluminium base plate • Dust extraction outlet • Parallel guide with 24TCT blade Contents: 1 x Circular saw 1 x 3Ah battery 1 x Fast charger £158.33 Ex. VAT £189.99 Inc. VAT Battery D20 20V Li-ion Batteries per item 1 x 3Ah Blade diameter 165mm Bore 20mm Charger type 4A Cutting depth 50mm at 90°, 35mm at 45° No-load speed 3,650rpm Supplied in case No Weight (bare tool) 2.58kg 42 drapertools.com Power Tools & Accessories

D20 20V Nailer/Stapler, 1 x 2.0Ah Battery, 1 x Charger Stock No. 00646 • Single or contact firing • Safety contact tip • Supplied in a tough carry case Contents: 1 x Nailer/stapler 1 x 2.0Ah Battery 1 x Charger D20 20V Tri-Base Detail Sander, 1 x 2.0Ah Battery, 1 x Charger Stock No. 00608 • Hook and loop backing pad • Dust box Contents: 1 x Tri-base sander 1 x 2.0Ah Batter y 1 x Charger D20 20V LED Flexible Inspection Light (Bare Machine) Stock No. 55876 • Seven preset angle positions • A 270° adjustable head • Batteries and chargers are available separately D20 20V Heat Gun (Bare Machine) Stock No. 07590 • Heat ready within five seconds • Integrated LED worklight • Quick-release accessory noz zle • Safety switch with overload protection • Batteries and chargers are available separately Contents: 1 x Heat gun 1 x Flat nozzle 1 x Spoon reflector nozzle 1 x Concentration nozzle £166.66 Ex. VAT £199.99 Inc. VAT £70.83 Ex. VAT £84.99 Inc. VAT £19.16 Ex. VAT £22.99 Inc. VAT £54.16 Ex. VAT £64.99 Inc. VAT Battery D20 20V Li-ion Batteries per item 1 x 2.0Ah Charger type 1.65A Firing rate 60 per min Magazine capacity 100 Nail gauge 18 Nail length 20–50mm Staple length 19–40mm Staples Type 90 Supplied in case Yes Weight (bare tool) 2.66kg Battery D20 20V Li-ion Batteries per item 1 x 2.0Ah Charger type 1.65A No-load speed 11,000rpm Sanding pad 135 x 135 x 95mm Supplied in case No Weight (bare tool) 0.8kg Product dimensions W 240 x H 320 x D 150mm Battery D20 20V Li-ion Max. power 3W Supplied in case No Weight 0.47Kg Battery D20 20V Li-ion Voltage 20V Rated current 15A Max. temperature 550°C Airflow 200L/min Weight 0.6kg HIGHER DEMAND 5.0Ah – The largest battery, designed for high demand tools that need longer runtimes LOWER DEMAND 2.0Ah – A low profile battery, designed for when access or weight is an issue MULTI-TOOL BATTERY SYSTEM BATTERY CHARGERS TO POWER THE 20V D20 RANGE Stock No. 55887 2Ah Stock No. 00649 3Ah Stock No. 55898 4Ah Stock No. 55907 5Ah Stock No. 97914 2.4A Charger Stock No. 55913 4A Fast Charger Stock No. 92239 2 x 3.5A Twin Charger Stock No. 02255 12V In-car Charger 43 Power Tools & Accessories

Draper Expert Metric SDS+ Masonry Drill Set (5 Piece)

Stock No. 24904

• Tungsten carbide tip to withstand extreme heat generation and to ensure long life

• For use in concrete, brick and other similar materials

Contents:

2 x 110mm Drill bits: 5.0, 6.0mm

3 x 160mm Drill bits: 7.0, 8.0, 10.0mm

• Includes 25mm and 50mm 1/4" bits

• Manufactured from S2 steel, which is hardened and tempered with a satin chrome finish

• Attached with a plastic coloured ring for easy identification

• The bit holder with quick-release collet allows bits to be expelled quickly and efficiently

• Supplied in a heavy-duty storage case with plastic inlay to hold bits securely

Contents:

1 x Magnetic bit holder

12 x Plain slot bits: 3 (x2), 4 (x 2), 5 (x2), 5.5 (x2), 6 (x2), 7mm (x2)

9 x Cross slot bits: No.0 (x2), No.1 (x2), No.2 (x3), No.3 (x2)

13 x PZ-type bits: No.0 (x3), No.1 (x3), No.2 (x4), No.3 (x3)

10 x Draper TX-STAR® bits: T8, T9, T10, T15, T20, T25, T27, T30, T35, T40

10 x Hex bits: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8mm

2 x 50mm Plain slot bits: 4mm, 6mm

3 x 50mm PZ-type bits: No.1, No.2, No.3

Stock No. 82401

• Manufactured from S2 steel, which is hardened and tempered with a satin chrome finish

• Attached with a plastic coloured ring for easy identification

• The bit holder with quick-release collet allows

Draper Expert Coloured Screwdriver Bit Set in Magnetic Holder (13 Piece)

bits to be expelled quickly and efficiently • Supplied in a convenient storage case, which opens up for easy access to the bits Contents: 1 x Magnetic bit holder 4 x Plain slot bits: 3, 4, 5, 6mm 4 x Cross slot bits: No.0, No.1, No.2, No.3 4 x PZ-type bits: No.1, No.2 (x2), No.3 Draper Expert SDS+ Chisel Set (3 Piece) Stock No. 40405 • SDS+ shank • Hardened and tempered carbon steel Contents: 2 x 220mm Flat chisels: 20, 40mm 1 x 220mm Point chisel Bi-metal Reciprocating Saw Blades for Metal Cutting, 225mm, 24tpi (Pack of 5) Stock No. 38593 • Bi-metal manufactured to a high quality • For flexible cutting of ferrous • Compatible with most recipr 1/2" connection Draper Expert Metric Wood Drill Set (7 Piece) Stock No. 24902 • Medium carbon steel, hardened and tempered with a blackened finish • For use with hand and power tools Contents: Sizes: 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 10mm £14.99 Ex. VAT £17.99 Inc. VAT £7.49 Ex. VAT £8.99 Inc. VAT £17.49 Ex. VAT £20.99 Inc. VAT £7.29 Ex. VAT £8.75 Inc. VAT £9.99 Ex. VAT £11.99 Inc. VAT £9.99 Ex. VAT £11.99 Inc. VAT Draper Expert Coloured Screwdriver Bit Set (60 Piece) Stock No. 82405 Blade length Working length Cutting depth Teeth per inch 24tpi Connection 1/2" universal fitment Weight 0.16kg 44 drapertools.com Power Tools & Accessories

•

Stock No. 56407

• Two functions: drill and chisel

• Safety clutch

• All-metal gearbox

• Anti-vibration handle

• Depth rod

•

Stock No. 56413

•

• Fan-cooled motor

•

Drilling

Expert SDS Max. Rotary Hammer Drill, 1600W

Draper

Expert T-Handle Hex Breaker, 22.5kg, 2100W

Comes with a 2.2m cable and BS plug Contents: 1 x Auxiliary handle 1 x Point chisel: 18 x 320mm 1 x Drill bit: 18 x 320mm 1 x Spanner Draper

Designed to break concrete and similar materials, intended for trade use • Extremely efficient breaking action 22.5kg with high motor rate of 85J

Accessories include two 410mm chisel bits, suitable for undertaking most breaking jobs

Comes with a 3.2m HD electrical cable and BS plug

1 x

3 x Inner

spanners £134.99 VAT £457.50 Ex. VAT £549.00 Inc. VAT

Supplied with a durable wheeled carry case Contents: 1 x Point chisel: 30 x 410mm 1 x Flat chisel: 30 x 410mm 2 x Carbon brushes

Oil box

Spanner

hexagon

(LpA) 85.09dB(A) Sound level (LwA) 107dB(A) Vibration level (ah) 18.421m/s Weight 22.5kg 230V Hex Breaker, 14kg, 1500W Stock No. 56409

capacity (masonry) 40mm Impact joules 9.0J Max. impact rate 3,530bpm No-load speed 560rpm Supplied in case Yes Voltage 230V Wattage 1,600W Weight 7.3kg Voltage 230V Rated input 2,100W Max. impact rates 1,650bpm Impact 85J Sound level

Demolition chisel

Comes with a 3.2m cable and BS plug

Supplied in a carry case Draper Expert Breaker, 18.5kg, 1700W Stock No.

56411

• Demolition chisel

• Fan-cooled motor

• Anti-vibration rear handle • Tough and durable all-metal gearbox

and

• Comes with a 3.2m cable

BS plug

case Impact joules45J 65J Max. impact rate1,900bpm 1,900bpm Supplied in case Yes Yes – with wheels Voltage 230V or 110V 230V Wattage 1,500W 1,700W Weight 14kg 18.5kg Contents 1 x Auxiliary handle 1 x Point chisel: 30 x 410mm 1 x Flat chisel: 30 x 410mm 1 x Spanner 2 x Hex keys: 5, 6mm 1 x Auxiliary handle 1 x Point chisel: 30 x 410mm 1 x Flat chisel: 30 x 410mm 1 x Spanner 2 x Hex keys: 5, 6mm RRP Ex. VAT £196.99 £229.16 RRP Inc. VAT £236.40 £274.99 45 drapertools.com Power Tools & Accessories

• Supplied in a carry

230V Wet & Dry Vacuum Cleaner, 15L, 1250W Stock No. 90107 • Onboard tool storage • Castors for easy movability • Features carry handle • Robust polypropylene tank • Additional blower function • Comes with 5m (approx.) cable Draper Expert 110V M-Class Wet and Dry Vacuum Cleaner, 35L, 1200W Stock No. 86685 Draper Expert 230V M-Class Wet and Dry Vacuum Cleaner, 35L, 1200W Stock No. 38015 Max. airflow 25L/s 60L/s 60L/s Rated input 1,250W 1,200W 1,200W Tank volume 15L 35L 35L Vacuum pressure18kPa 24kPa (240mbar) 24kPa (240mbar) Weight 4.8kg 8.5kg 8.5kg Contents 3 x 345mm Plastic tubes 1 x 1.5m Suction hose 1 x Foam filter 1 x Dual-action floor brush 1 x Cloth filter 1 x Crevice tool 1 x Floor brush 1 x Dust bag (All accessories are 35mm diameter) 1 x Cartridge filter 1 x Foam filter 1 x Paper dust bag 1 x Plug socket 1 x 3m Flexible hose with hand grip and air control 2 x Extension tubes 1 x Floor brush 1 x Carpet attachment with fluid insert 1 x Crevice nozzle 1 x Cartridge filter 1 x Foam filter 1 x Paper dust bag 1 x Plug socket 1 x 3m Flexible hose with hand grip and air control 2 x Extension tubes 1 x Floor brush 1 x Carpet attachment with fluid insert 1 x Crevice nozzle RRP Ex. VAT £55.83 £457.50 £429.17 RRP Inc. VAT £66.99 £549.00 £515.00 • Manufactured to fully comply with the “M” class standard • Fitted with an automatic filter cleaner that vibrates after use • Achieves 99.9% dust removal in line with HSE recommendations • Each vacuum is fitted with an auto-start /stop plug socket, which automatically switches off and on by use of the power tool’s on/off button • Low 68dB noise level, 35L capacity, powerful Amiteck motor and full bag indicator all unite to create a vacuum designed with the user in mind, delivering a superior user experience FIND THE RIGHT ACCESSORY FOR YOUR POWER TOOL Explore our extensive range of power tool accessories at drapertools.com 46 drapertools.com Power Tools & Accessories

Double-sided unit available Strong castor wheels Pegboards available on select cabinets High-quality hardwood worktop 47 BUNKER® ROLLER TOOL CABINETS The range that’s Built to Protect drapertools.com

Stock no Colour No. of wheels DimensionsWeight Static weight capacity per drawer 08221 Green 4 (2 brakes) W 1,122 x H 951 x D 461mm 64kg50kg 08222 Blue 08216 Grey Stock no. Colour No. of wheels DimensionsWeight Static weight capacity single runner drawer Static weight capacity double runner drawer 08236 Green 4 (2 brakes) W 1,502 x H 973 x D 622mm 149.7kg50kg 100kg 08237 Blue 08227 Grey Stock no. ColourNo. of wheels Dimensions Weight Static weight capacity single runner drawer Static weight capacity double runner drawer 08269 Green 4 (2 brakes) W 1,430 x H 1,009 x D 800mm 171kg 50kg 100kg 08251 Grey 4 (2 brakes) W 1,430 x H 1,009 x D 800mm 171kg 50kg 100kg 7 Drawer, 41" 10 Drawer, 56" £699.95 Ex. VAT £839.95 Inc. VAT £1,429.95 Ex. VAT £1,715.95 Inc. VAT £1,199.95 Ex. VAT £1,439.95 Inc. VAT BUNKER® Workbench Roller Tool Cabinets BUNKER® 48" Multi-Functional Workbench Roller Tool Cabinet, 14 Drawer drapertools.com 48 Workshop Storage & Toolkits

Stock no. Colour No. of wheels DimensionsWeight Static weight capacity single runner drawer Static weight capacity double runner drawer 08238 Grey 4 (2 brakes) W 1,631 x H 974 x D 584mm 182.5kg 50kg100kg Stock no. Colour No. of wheels DimensionsWeight Static weight capacity single runner drawer Static weight capacity double runner drawer 08241 Grey 6 (4 brakes) W1,991xH1,008xD610mm 225kg50kg100kg 15 Drawer, 61" 15 Drawer, 72" £1,849.95 Ex. VAT £2,219.95 Inc. VAT £1,499.95 Ex. VAT £1,799.95 Inc. VAT BUNKER® Workbench Roller Tool Cabinets with Bottle Opener BUNKER® 56" Roller Workstation with Workbench, 10 Drawer Static weight capacity single runner drawer Static weight capacity double runner drawer Static weight capacity per cupboard Static weight capacity of top shelf 50kg 100kg 30kg (shelf 10kg)15kg £1,549.95 Ex. VAT £1,859.95 Inc. VAT Stock no.ColourNo. of wheels Dimensions Weight 08242 Grey 4 (2 brakes)W 1,502 x H 1,884 x D 700mm195.8kg drapertools.com 49 Workshop Storage & Toolkits

Double Garage Workstation Stock No. 40086 • Complete storage solution offering cabinets, drawers and workstation • Lock system for security, with six keys • Fully adjustable feet • Each tall cabinet has three fixed shelves • Matt black powder-coated finish • Easy assembly Wall cabinets W 680 x H 400 x D 320mm (each) Tall cabinets with three shelves W 750 x H 1,930 x D 470mm (each) Four-drawer base cabinets W 600 x H 830 x D 410mm (each) Pressed wooden worktop W 1,200 x H 25 x D 427mm Complete dimensions W 2,700 x H 1,930 x D 470m £1,050.00 Ex. VAT £1,260.00 Inc. VAT 50 drapertools.com Workshop Storage & Toolkits

£124.99 Ex. VAT £149.99 Inc. VAT £195.83 Ex. VAT £235.00 Inc. VAT £290.83 Ex. VAT £349.00 Inc. VAT Tool Chest, 4 Drawer, 26", Blue Stock No. 14589 • Sheet steel construction • Ball bearing runners • Integral locking system • Carry handles • Protective foam drawer liners Contents: 3 x Drawers: W 570 x H 48 x D 273mm 1 x Drawer: W 570 x H 74.5 x D 273mm Overall size: W 660 x H 377 x D 307mm Tool Chest, 5 Drawer, 26", Blue Stock No. 35746 • Sheet steel construction • Ball bearing runners • Integral locking system • Protective foam drawer liners Contents: 4 x Drawers: W 570 x H 48 x D 410mm 1 x Drawer: W 570 x H 74.5 x D 410mm Overall size: W 660 x H 307 x D 435mm Roller Tool Cabinet, 7 Drawer, 26", Blue Stock No. 15040 • Sheet steel construction • Ball bearing runners • Integral locking system • Heavy-duty castors Contents: 1 x Drawer: W 570 x H 48 x D 410mm 3 x Drawers: W 570 x H 74.5 x D 410mm 2 x Drawers: W 572 x H 100.5 x D 408mm 1 x Drawer: W 570 x H 153.5 x D 410mm Overall size: W 680 x H 945 x D 458mm Combined Roller Cabinet and Tool Chest, 6 Drawer, 24" • Manufactured from sheet steel • Powder-coated finish • Aluminium effect trim • Ball bearing runners on drawers • Heavy-duty handles • Swivelling castors White Stock No. 19576 Green Stock No. 19566 Tool chest configuration 3 x Drawers: W 511 x H 40 x D 225mm 1 x Drawer: W 511 x H 84 x D 225mm Overall size: W 600 x H 340 x D 260mm Roller cabinet configuration 2 x Drawers: W 511 x H 84 x D 308mm Overall size: W 616 x H 658 x D 330mm Tool chest and roller cabinet Overall size (including castors) W 616 x H 998 x D 330mm Weight 30kg £183.33 Ex. VAT £220.00 Inc. VAT £183.33 Ex. VAT £220.00 Inc. VAT 51 drapertools.com Workshop Storage & Toolkits

Combination Roller Cabinet and Tool Chest,16 Drawer, Red Stock No. 04331 • Sheet steel construction with a powder-coated finish • Drawers fitted with ball-bearing runners and protective foam liner • Integral locking system, with two keys supplied • Roller cabinet has a pull handle, carry handles and four heavy-duty castors (two braked, two fixed) for mobility Draper Expert Roller Tool Cabinet, 6 Drawer and Side Locker, 42" Stock No. 14546 • Six-drawer professional roller cabinet • One pull-out locker with internal storage • Soft grip pulling handles • Made from thick sheet steel • Protective powder-coated finish Draper Expert Tool Chest, 7 Drawer, 42" Stock No. 14444 • Seven-drawer locker top tool chest • Made from thick sheet steel • Protective powder-coated finish • Fitted with an aluminium trim • 3mm EVA foam linings Roller cabinet configuration 1 x Drawer: W 986 x H 131 x D 408mm 1 x Drawer: W 591 x H 320 x D 408mm 1 x Drawer: W 591 x H 104 x D 408mm 3 x Drawers: W 591 x H 77 x D 408mm 1 x Pull out locker with internal storage Overall size (including castors) W 1,067 x H 1,099 x D 460mm Weight 106kg Tool chest configuration 1 x Drawer: W 352 x H 158 x D 408mm 2 x Drawers: W 352 x H 50 x D 408mm 2 x Drawers: W 583 x H 50 x D 408mm 2 x Drawers: W 583 x H 77 x D 408mm Overall size (including castors) W 1,055 x H 626 x D 450mm Weight 60kg Top tool chest configuration 3 x Drawers: W 170.5 x H 48 x D 273mm 2 x Drawers: W 570 x H 48 x D 273mm 1 x Drawer: W 570 x H 74.5 x D 273mm Overall size: W 660 x H 377 x D 307mm Weight: 49.5kg Intermediate tool chest configuration 2 x Drawers: W 570 x H 48 x D 410mm 1 x Drawer: W 570 x H 74.5 x D 410mm 3 x Drawers: W 670 x H 265 x D 451mm Weight: 17.5kg £479.17 Ex. VAT £575.00 Inc. VAT £333.33 Ex. VAT £399.99 Inc. VAT £540.83 Ex. VAT £649.00 Inc. VAT 52 drapertools.com Workshop Storage & Toolkits

•

Contents:

1 x Full drawer

insert infill tray (3 piece)

1 x Soft grip screwdriver set (27 piece)

1 x Spanner set (28 piece), plier set (11 piece)

1 x 1/4", 3/8", 1/2" Socket set (96 piece)

1 x File set (2 piece)

1 x Plier set (2 piece)

1 x Punch and impact driver kit (25 piece)

1 x Bit set (196 piece)

1 x Caliper windback kit (18 piece)

1 x Scraper, hook and pick set (9 piece)

1 x 1/2" Sq. dr. deep impact socket set (11 piece)

1 x 1/2" Sq. dr. impact socket set (15 piece)

1 x 1/2" Sq. dr. impact socket set and extension bar set (16 piece)

1 x 1/2" Sq. dr. impact Draper TX-STAR® and hex socket set (28 piece)

1 x Oil service kit (101 piece)

1 x Extension bar

1 x Universal joints and socket convertor set (16 piece)

1 x Precision bar set (5 piece)

1 x VDE Ergo Plus screwdriver set (10 piece)

1 x Screwdriver impact bits and driver set (40 piece)

1 x Combination tap and die set (22 piece)

1 x 1/4 Drawer EVA infill tray (3 piece)

1 x VDE approved plier set (4 piece)

1 x VDE approved screwdriver set (11 piece)

1 x Toolkit (36 piece)

1 x T-handle ball end hex key set (7 piece)

1 x T-handle ball end Draper TX-STAR® key set (7 piece)

1 x 6–24V Automotive circuit tester

1 x Automotive automatic and manual ranging digital multimeter

1 x 1.8kg Fibreglass shaft club hammer

1 x 1kg Deadblow hammer

Draper Expert Heavy Duty Steel Shelving Unit, 5 Shelves

No. 21663

Five-shelf unit of robust construction

Stock

•

Manufactured from high-quality steel

Boltless for easy assembly

Each shelf can carry up to 225kg (evenly distributed), giving a total of 1,125kg

Dimensions: W 1,220 x H 1,830 x D 450mm Drawer Organisers

Ideal for use in the workshop or home

Fitted with a latching facility on the drawers 30 Drawer 9 Bin Organiser Stock No. 31232

Organise your garage, workshop or home wit

this dual-sized compartment organiser

•

Fitted with a latching facility on the drawers

Designed for durability, this organiser is ideal for storing all your bits and bobs Contents: 30 x Drawers: W 52 x H 35 x D 138mm 9 x Bins: W 89 x H 72 x D 150mm 40" Mechanic's MEGAKIT Stock No. 98887 • An eight-drawer tool chest and 11-drawer roller cabinet • Manufactured from good quality powder-coated steel • Packed with 700 tool pieces stored in high-quality EVA foam trays • Included with the megakit is a slimline COB LED inspection lamp 30 Drawer Stock No. 12015 Contents: 24 x Drawers: W 53 x H 38 x D 134mm 6 x Drawers: W 110 x H 53 x D 134mm 12 Drawer Stock No. 12014 Contents: 8 x Drawers: W 53 x H 38 x D 134mm 4 x Drawers: W 105 x H 53 x D 134mm £120.83 Ex. VAT £144.99 Inc. VAT £37.49 Ex. VAT £44.99 Inc. VAT £29.16 Ex. VAT £34.99 Inc. VAT £14.16 Ex. VAT £16.99 Inc. VAT £2,416.66 Ex. VAT £2,899.99 Inc. VAT • Impact-resistant plastic • Slotted holes in the cabinet facilitate wall mounting

EVA

Includes 700 mechanic tools! 53 drapertools.com Workshop Storage & Toolkits

Draper Expert Tool Kit (90 Piece)

Stock No. 70282

• A comprehensive range of frequently used hand tools for the workshop, garage and around the home

• The cantilever toolbox is manufactured from sheet steel and has five trays

• High-density foam inserts to help organise storage and show when tools are missing

• Toolbox dimensions: W 480 x H 230 x D 230mm

Contents:

12 x 1/4" Draper Exper t HI-TORQ® six-point sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

11 x 1/2" Draper Expert HI-TORQ® six-point sockets: 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27mm

2 x Plain slot screwdrivers: 5 x 75, 6 x 100mm

2 x PH-type screwdrivers: No.1 x 75mm, No.2 x 100mm

21 x 25mm CRV screwdriver bits:

– 4 x Plain slot: 4, 5, 5.5, 6.5mm

– 3 x PH-type: No.1, No.2, No.3

– 4 x Hex: 3, 4, 5, 6mm

– 3 x Square: No.1, No.2, No.3

– 4 x Draper TX-STAR®: T10, T20, T25, T30

– 3 x PZ-type: No.1, No.2, No.3

1 x 177mm Combination pliers

1 x 150mm Long nose pliers

1 x 250mm Adjustable wrench

1 x 1/4" Bit driver

1 x 3/8" (F) x 1/4" (M)

1 x 1/4" Sq. dr. 72-tooth reversible ratchet

1 x 1/2" Sq. dr. 72-tooth reversible ratchet

1 x 19mm Cold chisel

1 x 3mm Centre punch

2 x Pin punch: 2, 4mm

1 x 250mm Mini handy saw

1 x 250mm Blade for mini handy saw

1 x 142mm Scissors

1 x 5m Measuring tape

1 x 1/2" x 125mm Extension bar

2 x 1/2" Sq. dr. spark plug sockets: 10, 14mm

1 x 3/8" (F) x 1/2" (M)

1 x 1/4" x 75mm Extension bar

11 x Combination spanners: 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19mm

1 x 200mm Flat file

1 x 18mm Knife

1 x 16oz Claw hammer

1 x 1/4" Sq. dr. to 1/4" hex bit adaptor

1 x 1/4" Sq. dr. to 3/8" sq. dr. adaptor

5 x 1/4" E sockets: E4, E5, E6, E7, E8

1 x Cantilever toolbox

Tool Kit (100 Piece)

Stock No. 08627

• A comprehensive range of frequently used hand tools for the workshop and around the home

• The sockets and many of the hand tools are manufactured from correctly hardened and tempered chrome vanadium steel

• Organised inside a sturdy blow-moulded plastic storage case

Contents:

11 x 1/4" Sq. dr. sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12mm

14 x 1/2" Sq. dr. sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm

3 x Plain slot screwdrivers: 5 x 75, 6 x 100, 8 x 150mm

2 x PH-type screwdrivers: No.1 x 75mm, No.2 x 100mm

20 x 1/4" Hex 25mm CRV screwdriver bits: – 4 x PH-type: No.0, No.1, No.2, No.3

– 3 x PZ-type: No.1, No.2, No.3

– 4 x Hex: 3, 4, 5, 6mm

– 1 x Plain slot: 4mm

– 7 x Draper TX-STAR®: T8, T10, T15, T20, T25, T27, T30

– 1 x 1/4" Sq. dr. adaptor

13 x Spanners: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm

1 x 18mm Utility knife

10 x Retractable trimming knife blades

1 x 1/4" Sq. dr. spinner handle

1 x 1/2" Sq. dr. 72-tooth reversible ratchet

1 x 1/4" Sq. dr. 72-tooth reversible ratchet

1 x 250mm Water pump pliers

1 x 150mm Long nose pliers

1 x 150mm Side cutters

1 x 250mm Self-grip pliers

1 x 1/4" Extension bar: 75mm

2 x 1/2" Extension bars: 125, 250mm

1 x 3/8" (F) to 1/2" (M) sq. dr. sliding extension bar adaptor

1 x 1/4" Sq. dr. to 1/4" hex adaptor

1 x 1/2" Universal joint

1 x 3m Measuring tape

2 x Spark plug sockets: 10, 14mm

10 x Hex keys: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 10mm

£166.66 Ex. VAT £199.99 Inc. VAT £110.83 Ex. VAT £132.99 Inc. VAT 54 drapertools.com Workshop Storage & Toolkits

Tool Kit in Steel Cantilever Toolbox (126

Piece)

Stock No. 48091

• A comprehensive range of frequently used hand tools for the workshop and around the home

• The cantilever toolbox is manufactured from sheet steel and has five trays

• High-density foam inserts to help organise storage and show when tools are missing

• Toolbox dimensions: W 420 x H 200 x D 200mm

Contents:

1 x 3/8" Ratchet wrench

1 x 75mm 3/8" Sq. dr. extension bar

2 x Spark plug sockets: 16, 21mm

1 x 3/8 (F) to 1/4" (M) adaptor

10 x 3/8" Sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm

8 x 3/8" Sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4"

10 x 1/4" Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm

10 x 1/4" Sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"

3 x 1/4" E sockets: E6, E7, E8

1 x 1/4" Screwdriver bit driver

1 x 1/4" Hex bit holder (60mm)

19 x 1/4" Hex 25mm CRV screwdriver bits:

– 4 x PH-type: No.0, No.1, No.2, No.3

– 3 x PZ-type: No.1, No.2, No.3

– 4 x Hex: 3, 4, 5, 6mm

– 1 x Plain slot: 4mm

– 7 x Draper TX-STAR®: T8, T10, T15, T20, T25, T27, T30

2 x Plain slot screwdrivers: 5 x 75, 6 x 100mm

2 x Cross slot screwdrivers: No.1 x 75mm, No.2 x 100mm

6 x Combination spanners: 8, 10, 12, 13, 14, 17mm

1 x 1/4" Hex to 1/4" sq. dr. adaptor

8 x Metric hex keys: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm

8 x Imperial hex keys: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4"

1 x 16oz BS876 Claw hammer

1 x 5m Measuring tape

1 x 150mm Combination pliers

1 x 150mm Side cutters

1 x 18mm Utility knife

1 x Scissors

25 x 150mm Cable ties

1 x Cantilever tool box

Draper Expert Mechanic's Tool Kit (127 Piece)

Stock No. 32027

• A comprehensive range of auto hand tools for the workshop, mobile engineer and mechanic

• Ideal for a mobile engineer or mechanic who is fixing and servicing vehicles on the move

• Manufactured from correctly hardened and tempered chrome vanadium steel

• Organised inside a heavy-duty reinforced lockable case with aluminium trim and handle, supplied with two keys

Contents:

9 x Combination spanners: 10, 11, 12, 13, 14, 15, 16, 17, 19mm

9 x Long arm hex key set: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

1 x Magnetic tip bit driver

3 x Plain slot screwdrivers: 6.5 x 38, 5.5 x 75, 6.5 x 100mm

3 x PH-type screwdriver: No.2 x 38mm, No.1 x 75mm, No.2 x 100mm

1 x 150mm Long nose pliers

1 x 170mm Combination pliers

1 x 150mm Diagonal side cutters

1 x 250mm Water pump pliers

1 x 1/2" Sq. dr. reversible ratchet

1 x 1/4" Sq. dr. reversible ratchet

13 x 1/4" Sq. dr. 6-point sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm

15 x 3/8" Sq. dr. multi-drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm

11 x 1/2" Sq. dr. 6-point sockets: 15, 16, 17, 19, 20, 21, 22, 24, 27, 30, 32mm

10 x Nut drivers: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

1 x 1/4" Sq. dr. coupler

1 x 1/4" Quick-release 1/4" hex driver

1 x 1/4" (F) to 3/8" (M) socket adaptor

1 x 1/4" Hex to 1/4" sq. dr. adaptor

1 x 1/4" Hex to 3/8" sq. dr. adaptor

1 x 1/4" Hex to 1/2" sq. dr. adaptor

1 x 1/4" Sq. dr. spinner handle

2 x 1/4" Sq. dr. extension bars: 50, 100mm

2 x 1/2" Sq. dr. extension bars: 125, 250mm

1 x 1/4" Sq. dr. sliding T-bar

1 x 1/2" (M) to 3/8" (F) 3-way socket adaptor

1 x 1/4" Sq. dr. universal joint

1 x 1/2" Sq. dr. universal joint

30 x 25mm Screwdriver bits in plastic case:

– 10 x Draper TX-STAR®: T10 (x2), T15 (x2), T20 (x2), T25, T27, T30, T40

– 10 x PH-type: No.0 (x2), No.1 (x2), No.2 (x4), No.3 (x2)

– 5 x Plain slot: 3, 4, 5, 5.5, 6mm

– 5 x Hex: 3, 4, 5, 5.5, 6mm

1 x 1/2" (F) x 3/8" (M) sq. dr. socket adaptor

1 x 1/2" x 5/16" Coupler

£91.66 Ex. VAT £109.99 Inc. VAT £183.33 Ex. VAT £219.99 Inc. VAT 55 drapertools.com Workshop Storage & Toolkits

•

Contents:

1 x Long nose pliers: 200mm 1 x Non-contact voltage tester

Screwdriver and Pliers Set (14

Stock No. 94860

• Draper Expert XP1000® quality

• Safe on live circuits of 1,000V AC and 1,500V DC

• Pliers forged in Germany

• Easy access to deep-seated screws

• Easy and comfortable to use with soft grip handle

Contents:

4 x Plain slot screwdriver blades: 3.5 x 100, 4.0 x 100, 5.5 x 100, 6.5 x 100mm

2 x PH-type screwdriver blades: No.1 x 80mm, No.2 x 100mm

2 x PZ-type screwdriver blades: No.1 x 80mm, No.2 x 100mm

2 x PZ/SL-type screwdriver blades: No.1 x 80mm, No.2 x 100mm

1 x Insulated screwdriver handle

1 x Precision insulated handle

1 x 160mm Side cutter

1 x 180mm Combination pliers

ALWAYS USEPROTECTION VDERANGE Youknowyouneedprotectiononthejob.Andthat’swhyyou’lllovetheXP1000rangefromDraper. ArangeofVDEandEN60900compliantslimandstandardscrewdriversandtetheredanduntethered pliers,thatlookgreatandperformbrilliantly.CertifiedforworkonliveACcircuitsupto1kVandDC circuitsupto1.5kV,allXP1000toolsarefullyinsulatedwithscrewdriversthatboastauniqueduallayer safetysheathontheirblades.*Choosethem,lovethen–andlivetotellthetaleafterwards. *Unique dual layer insulation warning sheath on screwdriver blades indicates wear and VDE protection status drapertools.com / XP1000

Draper Expert XP1000® quality

Safe on live circuits of 1,000V AC and 1,500V DC

Pliers

forged in Germany

Easy

comfortable to use with soft grip

• Effortless clean cutting and long-term performance

and

handle

3 x Plain slot screwdrivers: 3.0 x 100, 4.0 x 100, 5.5 x 125mm 2

PZ-type screwdrivers: No.1 x 80mm, No.2 x 100mm 1

PZ/SL-type screwdriver: No.2 x 100mm 1

Side cutter and wire stripper: 160mm 1

Combination pliers: 180mm

Piece)

£97.49 Ex. VAT £116.99 Inc. VAT

Ex. VAT £79.99 Inc. VAT Building Tools

£66.66

•

• Forged in Germany

•

• Easy access to deep-seated screws

• Patented dual-layer insulation makes any damage highly visible

• Easy and comfortable to use with soft grip handles

XP1000 VDE Pliers Set (3 Piece)

Stock No. 94639

Draper

quality

Certified for use on live

Expert XP1000®

•

circuits of 1,000V AC and 1,500V DC

• Forged in Germany

• Effortless

1 x 180mm Combination pliers 1 x 160mm Long

1 x 160mm Diagonal side cutter

• Easy and comfortable to use with soft grip handles

clean cutting and long-term performance Contents:

nose pliers

• Draper Expert XP1000® quality

• Certified for use on live circuits of 1,000V AC and 1,500V DC

Tethered fixing solution complies with Work at Height Regulations

1 x

VDE Slimline Screwdriver Set (6 Piece)

• Easy and comfortable to use with soft grip handles Contents:

180mm Combination pliers

160mm Long nose pliers

160mm Diagonal side cutter XP1000

02167

Draper Expert XP1000® quality

• Certified for use on live circuits of 1,000V AC and 1,500V DC

1 x

XP1000 VDE Interchangeable Blade Screwdriver Set (18 Piece) Stock No. 05776 • Draper Expert XP1000® quality • Certified for use on live circuits of 1,000V AC and 1,500V DC • Precision-machined tips for exact fit to prevent screw damage • Easy and comfortable to use with soft grip handle Contents: 5 x Plain slot screwdriver blades: 3.0 x 100, 3.5 x 100, 4.0 x 100, 5.5 x 100, 6.5 x 100mm 3 x PH-type screwdriver blades: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm 3 x PZ-type screwdriver blades: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm 4 x Draper TX-STAR® screwdriver blades: T10 x 100mm, T15 x 100mm, T20 x 100mm, T25 x 100mm 1 x Mains tester (240V) 1 x Insulated screwdriver handle 1 x Insulated precision screwdriver handle 1 x Non-contact voltage tester XP1000 VDE Interchangeable Torque Screwdriver Set (9 Piece) Stock No. 65372 • Draper Expert XP1000® quality • Certified for use on live circuits of 1,000V AC and 1,500V DC • 1.0–5.0Nm torque setting for precision tightening of screws • Precision-machined tips for exact fit to prevent screw damage • Easy and comfortable to use with soft grip handle Contents: 4 x Plain slot screwdriver blades: 3.0 x 60, 4.0 x 80, 5.5 x 80, 6.5 x 100mm 2 x PH-type screwdriver blades: No.1 x 80mm, No.2 x 100mm 2 x PZ-type screwdriver blades: No.1 x 80mm, No.2 x 100mm 1 x Insulated torque screwdriver handle XP1000 VDE Water Pump Pliers, 250mm • Draper Expert XP1000® quality • Certified for use on live circuits of 1,000V AC and 1,500V • Easy and comfortable to use with soft grip handle • Multi-position joint and “no-nip” feature £39.99 Ex. VAT £47.99 Inc. VAT £70.83 Ex. VAT £84.99 Inc. VAT £66.66 Ex. VAT £79.99 Inc. VAT £70.83 Ex. VAT £84.99 Inc. VAT £33.33 Ex. VAT £39.99 Inc. VAT Stock No.TypeJaw capacity RRP Ex. VAT RRP 94640 Standard34mm £27.49£32.99 99058 Tethered34mm £29.16£34.99 57 drapertools.com Building Tools

Contents: 3

Plain slot screwdrivers: 3.5 x 100, 4.0 x 100, 5.5 x 125mm

PH-type screwdriver: No.2 x 100mm

x PZ-type screwdrivers: No.1 x 80mm, No.2 x 100mm

Hole Saw Kits • Features a range of accessories and variable pitch bi-metal hole saws, suitable for cutting steel, brass, bronze, cast iron, aluminium, wood and plastics • Maximum cutting depth of 35mm • Manufactured from high-quality steel with an M3 steel cutting edge for fast clean cutting action • Each hole saw has four side vents for the efficient removal of waste • Two hexagonal shank hole saw arbors • Supplied inside a sturdy blow-moulded storage case Ref Stock No.PiecesContents RRP Ex. VAT RRP Inc. VAT 1 99325 121 x Hex key, 1 x Adaptor, 1 x Simple arbor, 2 x Pilot drills, 1 x Locking arbor, 6 x Hole saws: 16, 20, 25, 32, 40, 51mm Ø £32.49£38.99 2 99326 131 x Hex key, 1 x Adaptor, 1 x Simple arbor, 2 x Pilot drills, 1 x Locking arbor, 7 x Hole saws: 19, 22, 29, 38, 44, 51, 57mm Ø £41.66£49.99 1 2 Tube Bender, 15 and 22mm O/D Stock No. 65993 • Copper pipe bender for 15 and 22mm tubes • The heavy-duty formers are manufactured from die-cast heavy gauge steel

The rollers are manufactured from case-hardened carbon steel • The tubular steel handles have PVC cushion grips • The guides made from anodised aluminium

Supplied with a canvas storage bag Draper Expert Aluminium Plasterer’s Hawk Stock No. 81314 • Manufactured from sheet aluminium • Detachable soft grip handle for user comfor t and a callous protector • Size: 300mm² • Thickness: 1.8mm Draper Expert Soft Grip Adhesive Spreading Trowel, 280mm Stock No. 81231 • A 120mm-wide serrated carbon steel blade, hardened and tempered with lacquered • The blade is firmly fixed to the • Soft grip handle for user comfor Draper Expert Soft Grip Flooring Trowel, 400mm Stock No. 81218 • Carbon steel blade, hardened and tempered with a lacquered finish • The blade is firmly fixed to • Soft grip handle for user comfor Draper Expert Soft Grip Stainless Steel Plastering Trowel, 280mm Stock No. 81200 • Stainless steel “worn-in” blade, hardened and tempered with a lacquer finish • Soft grip handle for user comfor Draper Expert Soft Grip Bucket Trowel, 140mm Stock No. 81215 • Carbon steel blade, hardened and tempered with a lacquered finish • The blade is firmly fixed to the tang • Soft grip handle for user comfor O/D Micro Tube Bender, 8, 10, 12mm Stock No. 72376 • For use with soft copper tubes • Anodised aluminium guide with 0, 30, 60, 90, 120, 150 and 180° markings • The rollers are manufactured from diecast aluminium • The steel handles have PVC grips £54.16 Ex. VAT £64.99 Inc. VAT £16.66 Ex. VAT £19.99 Inc. VAT £11.66 Ex. VAT £13.99 Inc. VAT £13.33 Ex. VAT £15.99 Inc. VAT £14.16 Ex. VAT £16.99 Inc. VAT £6.25 Ex. VAT £7.50 Inc. VAT £20.83 Ex. VAT £24.99 Inc. VAT 58 drapertools.com Building Tools

•

230V Power Mixer, 1400W Stock No. 56427 • Ideal for mixing up to 120L • Suitable for mixing plaster, mortars, floor screeds, etc. • Variable speed, soft start and high torque • Aluminium gearbox • Supplied with two-part mixing paddle and a 2m cable with BS plug Cement Mixer, 160L, Full Assembly Required Stock No. 99511 • A reliable IP45-rated motor for exceptional performance • Light and portable, supplied with a robust four-leg stand and wheels • Ideal for mixing concrete and mor tar for small to medium-sized projects • Mixer can be used on or off the stand • Some assembly is required Contractor’s Secure Storage Box , 48" Stock No. 78787 • Heavy-duty contractor’s storage box manufactured from sheet steel with a powder-coated finish • Ideal for use on-site or in vans, workshops and garages • The feet have bolt holes for fixing to a solid base to avoid complete removal • With gas struts and integrated single pin hinge • Heavy-duty lif ting handles and the raised feet allow for easier movement by forklift trucks • Two cut-outs on the front for padlock attachment Draper Expert Soft Grip London Pattern Brick Trowel, 275mm Stock No. 82148 • Stainless steel blade, hardened • The blade is firmly fixed to the tang • Soft grip handle for user comfor Draper Expert Soft Grip Gauging Trowel, 175mm Stock No. 81214 • Carbon steel blade, hardened and • The blade is firmly fixed to the • Soft grip handle for user comfor Draper Expert Soft Grip Pointing Trowel, 150mm Stock No. 81213 • Carbon steel blade, hardened and • The blade is firmly fixed to the tang • Soft grip handle for user comfor £15.83 Ex. VAT £18.99 Inc. VAT £6.25 Ex. VAT £7.50 Inc. VAT £6.66 Ex. VAT £7.99 Inc. VAT £95.83 Ex. VAT £114.99 Inc. VAT £416.66 Ex. VAT £499.99 Inc. VAT £583.33 Ex. VAT £699.99 Inc. VAT Max. impact rate 4,350bpm No-load speed 0–800rpm Paddle diameter 140mm Spindle thread M14 Supplied in case No Voltage 230V Wattage 1,400W Weight 3.3kg Capacity 160L Input voltage 230V Motor wattage 650W Drum rotation speed 28rpm Drum opening 400mm Stand type Four-leg stand Dimensions W 790mm x H 1,335 x D 1,300mm Weight 59kg Dimensions W 1,200 x H 600 x D 600mm Weight 60kg 59 drapertools.com Building Tools

Visit drapertools.com/wireless-lighting for the full range SWITCH ON TO THE NEXT GENERATION OF MOBILE LIGHTING Introducing the Wireless Rechargeable Lighting Range from Draper PRACTICAL Charge single or multiple lights and other compatible devices, like mobile phones. SIMPLE Quick and easy charging in the workspace or on the go in a work van. Mini Flood Light 7W, 670 Lumens Hand Torch 10W, 1000 Lumens 60 drapertools.com Lighting

Head Torch 6W, 400 Lumens Single (10W) and Dual (2 x 10W) Charging Pads VERSATILE Reliable lighting for plumbers, electricians, garages, farmers or anyone who needs lights that are always ready for action.

Dust and shock resistant with ultra-tough nylon, aluminium and TPR construction –ideal for challenging environments. 61 drapertools.com Lighting

ROBUST

Draper

Expert COB/

Stock No. 65688

• Powerful 670 lumen 7W COB LED floodlight with three brightness settings

• Additional 250 lumen 4W SMD LED spotlight

• Super tough nylon, aluminium and TPR IK07 construction – 2m drop-proof

• Magnetic for mounting to charging bases and other metallic supports

• Approximate runtime of 2.5 to 10 hours and a fast four-hour charge time

• Long-distance beam – up to 118m

• IP65 dust and water resistance

• Battery level and charging indicator lights

• USB-C cable supplied

Stock No. 65690

• Six brightness settings, including a 5 lumen eco-setting and strobe mode feature

• Long-distance beam – up to 250m

• Super tough nylon, aluminium and TPR IK07 construction – 2m drop proof

• Magnetic for mounting to charging bases and other metallic supports

• Comfortable anti-slip sof t grip

• Battery level and charging indicator lights

• IP68 dust and water resistance

• Compatible with the Draper wireless charging pads

• Four brightness settings offering between 25 and 400 lumens

• Super tough IK07 construction with adjustable headband and easy push-button operation

• Magnetic for mounting to charging bases and other metallic supports

• Long-distance beam – up to 110m

• Low battery warning strobe

Light type1 x COB LED, 1 x SMD LED SMD LED 1 x COB LED, 1 x SMD LED Brightness120–670 lumens 5–1,000 lumens 25–400 lumens Wattage 7W COB, 4W SMD 10W 6W COB, 6W SMD Power sourceRechargeable 2.6Ah Li-ion battery Rechargeable 2.6Ah Li-ion battery Rechargeable 1.5Ah Li-ion battery Runtime 2.5–10 hours 2–200 hours 4–21 hours Charge time4 hours 4 hours 3 hours Rated IP65, IK07 IP68, IK07 IP68, IK07 DimensionsW 83 x H 97 x D 39mm W 41 x H 159 x D 41mm W 51 x H 71 x D 45mm Weight 220g 215g 120g Diameter 32mm 140–200mm (strap) RRP Ex. VAT £35.42 £41.66 £32.08 RRP Inc. VAT £42.50 £49.99 £38.50 Draper Expert Wireless Charging Pads • Fast wireless charging pads for charging devices • Pull-out phone holder for securing Qi enabled mobile phones while charging • Strong magnets on the front for attaching Draper wireless charging products • Strong magnetic panels on the rear for mounting to magnetic surfaces Mountable to non-metallic surfaces like walls and van panelling using built-in scr ymer IK07 construction – 2m drop-proof Stock no.PowerMax. no. of devicesConnectionsRatedDimensions Weight RRP Ex. VAT RRP Inc. VAT £29.16£34.99 2 65793 2 x 10W2 USB-CIP20, IK07W 291 x H 102 x D 28mm450g £50.83£60.99 62 drapertools.com Lighting

• IP65 dust and water resistance

• Compatible with the Draper wireless charging pads

• The soft elasticated headband strap can be adjusted for a comfortable fit

SMD LED Wireless/USB

Draper Expert COB/

Rechargeable Mini Flood Light, 7W, 670 Lumens

Draper Expert SMD LED Wireless/USB Rechargeable Hand Torch, 10W, 1000 Lumens

• USB-C cable supplied SMD LED

Wireless/USB Rechargeable Head Torch, 6W, 400 Lumens

Stock No. 65689

• USB-C cable supplied

Stock No. 08311

• Fast wireless charging of three devices at the same time (using both the single and dual charging pads)

• 10W SMD LED hand torch with four brightness settings (5–1,000 lumens)

• 7W COB LED and 4W SMD LED mini floodlight with four brightness settings (120–670 lumens)

• 6W SMD LED head torch with four brightness settings (25–400 lumens)

• Each device is supplied with USB-C charging cable

Wireless/USB

Stock No. 08312

• Fast wireless charging of two devices at the same time

• 10W SMD LED hand torch with four brightness settings (5–1,000 lumens)

• 7W COB LED and 4W SMD LED mini floodlight with four brightness settings (120–670 lumens)

• 6W SMD LED head torch with four brightness settings (25–400 lumens)

• Each device is supplied with USB-C charging cable

• The base can be used to charge other compatible wireless charging devices, like mobile phones

Stock No. 08318

• Fast wireless charging of two devices at the same time

• 10W SMD LED hand torch with four brightness settings (5–1,000 lumens)

• 6W SMD LED head torch with four brightness settings (25–400 lumens)

• Each device is supplied with USB-C charging cable

• The base can be used to charge other compatible wireless charging devices, like mobile phones

Wireless/USB Rechargeable Lights Kit with Single and Dual Charging Pads

Charging

Rechargeable Lights Kit with Dual

Pad

Charging

Rechargeable Torch Kit with Dual

Pad

Draper Expert Wireless Rechargeable Light Kits £174.99 Ex. VAT £209.99 Inc. VAT £145.83 Ex. VAT £174.99 Inc. VAT £110.83 Ex. VAT £132.99 Inc. VAT drapertools.com 63 Lighting

COB LED Rechargeable Mini Flood Light and Power Bank with Magnetic Base and Hanging Hook, 10W, 1000 Lumens, Blue Stock No. 88595 • A compact and durable COB LED mini floodlight and power bank • Strong mounting magnets and hanging hook • 180° adjustable bracket • Provides three light settings: low, high and flash • Simple push-button operation for on/off and lighting modes • USB-C Cable Supplied Rechargeable COB & XP-E LED Head Torch, 3W, 200 Lumens Stock No. 90067 • Adjustable elasticated head band • High, low and strobe lighting as well as COB high or low lighting controlled with a twofunction switch • Output is 200 lumens and there is a hand movement sensor for easy operation • Manufactured from aluminium and shockresistant plastic • Micro-USB to USB cable supplied Rechargeable LED Head Torch, 10W Stock No. 90064 • Adjustable elasticated head band

Three-function switch delivering high, mid and low lighting, producing a maximum of 900 lumens

3.7V 2.2Ah Li-ion battery

Manufactured from aluminium and shockresistant plastic

Micro-USB to USB cable supplied Headband with USB Rechargeable LED Torch, 1W, One Size • Ultra-bright LED headband with USB rechargeable torch for hands-free use • Provides three light settings: full beam, medium and dim • Torch component is easily removed for recharging and can be plugged directly into a standard USB port • Made from soft, stretchy and comfortable fleece material Beanie Hat with Rechargeable Torch, One Size, 1W, 100 Lumens • Built-in USB rechargeable LED headlight • High, medium and flashlight function settings, with runtimes of 90, 180 and 240 minutes respectively • A 90-minute charge time • The torch is easily removed for washing the beanie • USB 2.0 micro-B charging lead (29cm) supplied £19.16 Ex. VAT £22.99 Inc. VAT £9.16 Ex. VAT £10.99 Inc. VAT £35.83 Ex. VAT £42.99 Inc. VAT £16.66 Ex. VAT £19.99 Inc. VAT £8.74 Ex. VAT £10.49 Inc. VAT Light type COB LED Brightness 500–1,000 lumens Wattage 10W Power sourceRechargeable 4.4Ah Li-ion battery Runtime 3–6 hours Charge time 5–6 hours Dimensions W 105 x H 95 x D 40mm Weight 248g Ref Stock no.ColourLight typeWattagePower source RuntimeCharge timeWeight 1 95171 Blue 4 x LED1WRechargeable 0.25Ah battery4 hours1.5 hours19.5g 2 95172 Black Ref Stock no.ColourLight typeWattagePower sourceRuntimeCharge timeWeight 1 10015 Orange LED1W Rechargeable 250mAh battery 90–240 mins90 mins0.128g 2 10008 Yellow 3 10018 Green 4 10007 Navy Blue 5 99521 Black 6 99522 Grey 1 1 2 2 3 4 5 6 NEWNEWNEWNEW 64 drapertools.com Lighting

•

COB SMD LED Rechargeable Pocket Folding Slim Light, 100 Lumens Stock No. 64499

Mini-COB LED and SMD LED slim light with four light settings

The head vertically folds to a maximum of 180 degrees

•

Strong mounting magnets for hands- free use

LED charging indicator and low batter y warning light

•

Made from lightweight aluminium

USB-C charger supplied COB SMD LED Rechargeable Folding Slim Light, 300 Lumens Stock No. 64600

Super-bright COB LED and SMD LED slim light with four light settings

The head vertically folds to a maximum of 180 degrees

Strong mounting magnets for hands- free use

LED charging indicator and low batter y warning light

Made from lightweight aluminium

USB-C charger supplied COB/SMD LED Slimline Inspection Lamp, 7W, 700 Lumens • Pivoting and swiveling head • COB LED with SMD LED torch • Dimming function • Power indicator • Magnetic base and hook for hands-free use • Micro USB charging input • Micro-USB to USB cable with three-pin plug COB/SMD LED Rechargeable Inspection Lamp, 7W, 700 Lumens • COB LED with SMD LED torch • Power indicator • Three high power magnets and a 180° swivelling hook • Manufactured from shock-resistant plastic • Four light settings • USB charger with three-pin plug supplied £19.16 Ex. VAT £22.99 Inc. VAT £45.83 Ex. VAT £54.99 Inc. VAT £44.16 Ex. VAT £52.99 Inc. VAT £24.99 Ex. VAT £29.99 Inc. VAT Light type 2 x COB LED, 1 x SMD LED Wattage 1W COB, 1W SMD Brightness 50–100 lumens Power sourceRechargeable 0.35Ah Li-ion battery Runtime 3–6 hours Charge time 2.5 hours Rating IP54, IK07 Dimensions (unfolded) W 23.5 x H 225 x D 19.2mm Weight 60g Light type 2 x COB LED, 1 x SMD LED Wattage 3W COB, 1W SMD Brightness 100–300 lumens Power sourceRechargeable 1.1Ah Li-ion battery Runtime 3–6 hours Charge time 3 hours Rating IP54, IK07 Dimensions (unfolded) W 26.5 x H 300 x D 20.5mm Weight 97g Ref Stock no. Colour Light type WattageBrightness Power sourceRuntime Charge time Rating Dimensions (unfolded) 1 98346 Green COB LED, SMD LED 7W COB, 1W SMD 70–700 lumens Rechargeable 2.6Ah Li-ion battery 2–15 hours 4 hoursIP54 W 65.5 x H 397 x D 46.5mm 2 98348 Orange 3 98342 Blue Ref Stock no. Colour Light type WattageBrightnessPower sourceRuntime Charge time RatingDimensions 1 11762 Yellow COB LED, SMD LED 7W COB, 1W SMD 150–700 lumens Rechargeable 2.6Ah Li-ion battery 2–8 hours 4 hours IP65, IK09 W 53 x H 260 x D 40mm 2 11759 Green 3 11761 Orange 4 11758 Blue 1 1 2 2 2 3 3 4 4 COB/SMD LED Rechargeable Inspection Lamp, 10W, 1,000 Lumens • COB LED with SMD LED torch • Power indicator • Three high power magnets and a 180° swivelling hook • Manufactured from shock-resistant plastic • Four light settings • IP65 and IK09 rated • Micro-USB to USB cable supplied • USB charger supplied (excluding 11768) Ref Stock no. ColourWattageBrightnessPower sourceRuntime Charge time Dimensions RRP Ex. VAT RRP Inc. VAT 1 11767 Yellow 10W COB, 3W SMD 170–1,000 lumens Rechargeable 3.35Ah Li-ion battery 1–6 hours 5 hours W 53 x H 260 x D 40mm £52.49£62.99 2 11765 Green £52.49£62.99 3 11766 Orange £52.49£62.99 4 11768 Blue £49.99£59.99 65 drapertools.com Lighting

•

• This 2,000 lumens rechargeable SMD LED slim tripod site light creates 180 and 360-degree ultra-bright white or warm light (colour temperature 2,500-7,000K), with three settings (high, medium, low)

• The detachable light unit comes with a magnetic base and hanging hook; the beam angle is 66 degrees and the beam distance is 55m

• Height adjustable 0.8–1.5m, the site light is suitable for indoor and outdoor applications and is IP65 and IK07 rated

• The light has a built-in 3.7V 4000mAh lithium battery with a runtime of 1.5 hours on 2,000 lumens, 2.5 hours on 1,200 lumens and 4.5 hours on 700 lumens

Runtime 2,000 lumens 1.5 hours Runtime 1,200 lumens 2.5 hours Runtime 700 lumens 4.5 hours Charge time 5–6 hours

230V Rechargeable Tripod Site Light, 20W, 2000 Lumens

NEW

Stock No. 03186

£91.66 Ex. VAT £109.99 Inc. VAT Wattage

Brightness

Dimensions (folded away) W

x H

x D

Lens size W

x H

• Made from cast aluminium, carbon steel and toughened glass • 2m USB-C charging lead supplied

2,000 lumens

665

80mm

930

350mm Max. extended height 1.5m Min. lowered height 0.8m Beam angle 100° Beam distance 55m Colour temperature 2,500–7,000K

NEW SITE LIGHTING RANGE AVAILABLE NOW • High lumen • 230V and 110V options 66 drapertools.com Lighting

Weight 1.95kg

NEW 110V SMD LED Folding

Site Lights

• Adjustable folding SMD LED site light gives an even spread of light through a beam angle of 100 degrees

• The colour temperature is 6,000 to 6,500K – cool white to daylight

• IP65 and IK06 rated and suitable for industrial use

• Made from cast aluminium, carbon steel and toughened glass

• Supplied with a 1.8m VDE cable and approved 110V plug

no.VoltageWattageBrightnessDimensions Lighting

03171 110V10W1,100 lumensW 295 x H 290 x D 80mmW 126.4 x H 88mm 100°

03172 110V20W2,200 lumensW 305 x H 305 x D 80mmW 144.8 x H 98mm 100° 1.85kg

NEW 230V SMD LED Folding Site Lights

• Adjustable folding SMD LED site light gives an even spread of light through a beam angle of 100 degrees

• The colour temperature is 6,000 to 6,500K – cool white to daylight

• IP65 and IK06 rated and suitable for industrial use

• Made from cast aluminium, carbon steel and toughened glass

• Supplied with a 1.8m VDE cable and approved 110V plug

NEW 230V Rechargeable Folding Site Lights

• Rechargeable folding SMD LED site light gives an even spread of light through a beam angle of 100 degrees

• The colour temperature is 6,000 to 6,500K – cool white to daylight –and there are three light output settings (100%, 50% and 30%)

• The light incorporates a power bank with a running time of four hours (at maximum setting)

• IP65 and IK06 rated and suitable for industrial use

• Made from cast aluminium, carbon steel and toughened glass

Stock drapertools.com

Lens size Beam angleWeight RRP Ex. VAT RRP Inc. VAT

1.75kg £32.49£38.99

£34.99£41.99

• 230V Three-pin charger supplied H 98mm 100° 2kg £41.66£49.99 03175 110V50W5,500 lumensW 345 x H 305 x D 80mmW 174.8 x H 98mm 100° 2kg £42.50£51.00 Stock no.VoltageWattageBrightnessDimensions Lens size Beam angleWeight RRP Ex. VAT RRP Inc. VAT 03177 230V10W1,100 lumensW 295 x H 290 x D 80mmW 126.4 x H 88mm 100° 1.75kg £32.49£38.99 03179 230V20W2,200 lumensW 305 x H 305 x D 80mmW 144.8 x H 98mm 100° 1.85kg £34.99£41.99 03180 230V30W3,300 lumensW 345 x H 305 x D 80mmW 185.8 x H 98mm 100° 2kg £41.66£49.99 03181 230V50W5,500 lumensW 345 x H 305 x D 80mmW 174.8 x H 98mm 100° 2kg £42.50£51.00 Stock no.VoltageWattageBrightnessDimensions Lens size Beam angleWeight RRP Ex. VAT RRP Inc. VAT 03182 230V10W1,100 lumensW 295 x H 290 x D 80mmW 126.4 x H 88mm 100° 1.75kg £57.49£68.99 03183 230V20W2,200 lumensW 305 x H 305 x D 80mmW 144.8 x H 98mm 100° 1.85kg £76.66£91.99 03185 230V50W5,500 lumensW 345 x H 305 x D 80mmW 174.8 x H 98mm 100° 2kg £87.49£104.99 67

03173 110V30W3,300 lumensW 345 x H 305 x D 80mmW 185.8 x

NEW 110V SMD LED Tripod Site Lights

• Tripod SMD LED site light is height adjustable 0.8–1.3m and gives an even spread of light through a beam angle of 100 degrees

• The colour temperature is 6,000 to 6,500K – cool white to daylight

• IP65 and IK06 rated and suitable for industrial use

• Made from cast aluminium, carbon steel and toughened glass

• Supplied with a 3m VDE cable and approved 110V plug

NEW 110V SMD LED Twin Head Tripod Site Lights

• Tripod twin head SMD LED site light is height adjustable 0.8–1.5m and gives an even spread of light through a beam angle of 100 degrees

• The colour temperature is 6,000 to 6,500K – cool white to daylight

• IP65 and IK06 rated and suitable for industrial use

• Made from cast aluminium, carbon steel and toughened glass

• Supplied with a 3m VDE cable and approved 110V plug

03187 110V10W1,100 lumensW 290 x H 295 x D 80mmW 126.4 x H 88mm 100° 1.75kg £45.83£55.00 03188 110V20W2,200 lumensW 250 x H 700 x D 150mmW 144.8 x H 98mm 100° 4.5kg £48.33£58.00 03192 110V30W3,300 lumensW 400 x H 700 x D 150mmW 185.8 x H 98mm 100° 5.5kg £52.49£62.99 03193 110V50W5,500 lumensW 400 x H 700 x D 150mmW 174.8 x H 98mm 100° 5.5kg £54.16£64.99 Stock no.VoltageWattageBrightnessDimensions

Inc. VAT 03195 110V10W (per light)1,100 lumensW 250 x H 700 x D 150mmW 126.4 x H 88mm 100° 5kg £69.16£82.99 03201 110V20W (per light)2,200 lumensW 250 x H 700 x D 150mmW 144.8 x H 98mm 100° 5kg £64.50£77.40 03203 110V30W (per light)3,300 lumensW 400 x H 700 x D 150mmW 185.8 x H 98mm 100° 6kg £74.16£88.99 03205 110V50W (per light)5,500 lumensW 400 x H 700 x D 150mmW 174.8 x H 98mm 100° 5.5kg £79.16£94.99

RRP Ex. VAT RRP

VAT

Stock no.VoltageWattageBrightnessDimensions Lens size Beam angleWeight

Inc.

RRP

68 drapertools.com Lighting

Lens size (per light)Beam angleWeight

Ex. VAT RRP

NEW 230V SMD LED Tripod Site Lights

• Tripod SMD LED site light is height adjustable 0.8–1.3m and gives an even spread of light through a beam angle of 100 degrees

• The colour temperature is 6,000 to 6,500K – cool white to daylight

• IP65 and IK06 rated and suitable for industrial use

• Made from cast aluminium, carbon steel and toughened glass

• Supplied with a 3m VDE cable and approved 230V plug

NEW

230V SMD LED Twin Head Tripod Site Lights

• Tripod twin head SMD LED site light is height adjustable 0.8–1.5m and gives an even spread of light through a beam angle of 100 degrees

• The colour temperature is 6,000 to 6,500K – cool white to daylight

• IP65 and IK06 rated and suitable for industrial use

• Made from cast aluminium, carbon steel and toughened glass

• Supplied with a 3m VDE cable and approved 230V plug

230V Four Socket Industrial Cable Reel

• Complies with BS 1363A and EN 61242 Specifications

• Fitted with thermal cut-out switch

• The maximum load fully unwound is 13A 3,120W

• Sturdy metal frame with an easy-wind handle and a four-socket plate

Stock no.VoltageWattageBrightnessDimensions Lens size Beam angleWeight RRP Ex. VAT RRP Inc. VAT

150mmW 126.4 x H 88mm 100° 4.5kg £45.83£55.00 03207 230V20W2,200 lumensW 250 x H 700 x D 150mmH 98 x W 144.8mm 100° 4.5kg £48.33£58.00 03208 230V30W3,300 lumensW 400 x H 700 x D 150mmH 98 x W 185.8mm 100° 5.5kg £52.49£62.99 03210 230V50W5,500 lumensW 400 x H 700 x D 150mmW 174.8 x H 98mm 100° 5.5kg £54.16£64.99 Stock no.VoltageWattageBrightnessDimensions Lens size (per light)Beam angleWeight RRP Ex. VAT RRP Inc. VAT 03211 230V10W (per light)1,100 lumensW 250 x H 700 x D 150mmW 126.4 x H 88mm 100° 4.5kg £69.16£82.99 03212 230V20W (per light)2,200 lumensW 250 x H 700 x D 150mmW 144.8 x H 98mm 100° 4.5kg £70.83£84.99 03213 230V30W (per light)3,300 lumensW 400 x H 700 x D 150mmW 185.8 x H 98mm 100° 5.5kg £74.16£88.99 03215 230V50W (per light)5,500 lumensW 400 x H 700 x D 150mmW 174.8 x H 98mm 100° 5.5kg £79.16£94.99 Ref. Stock no.LengthCable diameter RRP Ex. VAT RRP Inc. VAT 1 02120 50m 1.25mm² £87.49£104.99 2 02121 25m 1.5mm² £44.16£52.99 1 2 69 drapertools.com Lighting

03206 230V10W1,100 lumensW 250 x H 700 x D

D20 20V Leaf Blower • Ideal for blowing leaves and light debris from patios, driveways and paths Visit drapertools.com for all D20 power tools, batteries and chargers 230V Quiet Garden Shredder, 2800W Stock No. 97974 • Grinds waste efficiently but with little noise • Designed to slice through hedge trimmings, leaves and twigs quickly • Wheels and handle for easy transportation • Safety cut-out feature • Use the blockage prodder to push debris firmly onto the blade without endangering the operator 230V Garden Vacuum, Blower and Mulcher, 3000W Stock No. 94794 • Variable airflow • Rear handle, shoulder strap and support wheel for comfortable use • The leaf comb dislodges stubborn leaves • Shredding and leaf mulching action compresses leaves/debris 230V Rapid Garden Shredder, 2500W Stock No. 97973 • Designed to slice through hedge trimmings, leaves and twigs quickly • Wheels and handle for easy transportation • Safety cut-out feature • Use the blockage prodder to push debris firmly onto the blade without endangering the operator Garden Vacuum/Blower/Mulcher, 3200W Stock No. 93165 • A 3-in-1 blower, vacuum and mulcher • The mulcher has a metal blade and 15:1 shredding/mulching ratio • Easily convertible – blower to vacuum • Variable speed with two safety switches The two-piece vacuum/blower tube has a support wheel for easy manoeuvrability Power 2,800W 2,500W No-load speed 42rpm 4,050rpm Max. cutting diameter 44mm 40mm Shredding capacity 55kg/h 65kg/h Collection box 55L 50L Cable length 3m 3m Weight 20.5kg 14kg RRP Ex. VAT £241.66 £187.49 RRP Inc. VAT £289.99 £224.99 Airflow speed (blowing) 270km/h 260km/h Rated voltage 230V 230V Power 3,000W 3,200W Max. air volume 13.2m³/min 13m³/min Mulching ratio 10:1 15:01 Collection bag capacity 35L 45L Weight (machine only) 3.0kg 4.6kg RRP Ex. VAT £58.33 £91.66 RRP Inc. VAT £69.99 £109.99 Stock no.Supplied with RRP Ex. VAT RRP Inc. VAT 70526 1 x 2.0Ah Battery, 1 x Charger £71.66£85.99 92425 Bare machine £29.16£34.99 No-load speed 13,000rpm Wind speed 110, 210km/h Length 720mm Weight (bare tool) 1.27kg Voltage No-load speed Cutting width Nylon line Batteries Charger Weight D20 40V Grass Trimmer Stock No. 98504 • Four cutting head positions • Fully adjustable auxiliary handle • 4m Auto-feed double trimming line • Edge guard reduces line wastage £64.16 £76.99 Contents (for both machines): 1 x 3-in-1 Blower, vacuum and mulcher 1 x Two-piece vacuum tube 1 x Two-piece blower tube 1 x 45L Collection bag 1 x Shoulder strap 70 drapertools.com Landscaping & Gardening Tools

D20 40V Chainsaw • Low kickback Oregon® bar and chain • Tool-free chain tensioner • Large fell handle and automatic 230V Chainsaw, 350mm, 1800W Stock No. 70279 230V Chainsaw, 400mm, 2200W Stock No. 70280 Voltage 230V 230V Power 1,800W 2,200W Bar length 350mm (14") 400mm (16") No-load speed 8,200rpm 8,200rpm Chain gauge .050" .050" Cable length 10m 10m RRP Ex. VAT £95.83 £99.99 RRP Inc. VAT £114.99 £119.99 Stock no.Supplied with RRP Ex. VAT RRP Inc. VAT 30903 2 x 4.0Ah Batteries, 1 x Fast Charger £249.99£299.99 92423 Sold bare £116.66£139.99 Bar length 355mm Max. engine speed 4,500rpm Chain speed 8.5m/s Weight (bare tool) 4kg Power Bar length 450mm (17.7") No-load speed 11,000rpm Chain gauge .058" Petrol Chainsaw, 450mm, 45cc Stock No. 80103 • Washable air filter • Walbro carburetto • Sprocket tip • Easy recoil start Chainsaw Trousers, Large Stock No. 12055 • Protective trousers made from cotton/nylon mix with anti-cut inlay in accordance with EN 381 D20 Cordless Garden Saw Kit with Forestry Helmet Stock No. 99763 • The forestry helmet has been manufactured in accordance with 89/686/ EEC, Norm EN 397, EN 352 and EN 1731 • The helmet comes with a face/eye visor and noise protection ear defenders • The chainsaw is fitted with a low kickback Oregon® bar and chain and an easy to use tool-free chain tensioner • The pruning saw cuts up to 60mm ø wood and 3mm ø metal, making it ideal for cutting through nails holding fence panels together Contents: 1 x D20 20V Pruning Saw 1 x D20 40V Chainsaw 1 x Forestry Helmet 2 x D20 20V Lithium Battery (4.0Ah) 1 x D20 20V Twin Battery Charger £308.33 Ex. VAT £369.99 Inc. VAT • Oregon® bar and quickchange chain • Safety lock to prevent accidental starting • Automatic chain lubrication and oil level indicator window • Quick stop/automatic chain brake and safety switch • Low noise output £154.17 Ex. VAT £185.00 Inc. VAT £110.83 £132.99 E10 COMPATIBLE 71 drapertools.com Landscaping & Gardening Tools

• Quick-change cartridges

• Safety switch

•

Blade diameter 260mm

Blade quantity 6 Displacement 161cc Engine start Recoil Fuel tank capacity 1.3L No-load speed 3,600rpm Tilling depth 260mm Tilling width 560mm Weight (dry) 32kg

Engine capacity 32.5cc (two-stroke)

Max. engine output 1,000W

Max. engine speed 7,500rpm

Fuel

Ex. VAT

VAT

VAT £145.83 Ex. VAT £175.00 Inc. VAT

Lawn Aerator/Scarifier, 320mm

£241.66

£289.99 Inc.

£374.99 Ex.

£449.99 Inc.

230V

Stock No. 97921

• Four adjustable working depths (+4, -4, -8 and -12mm)

• Quick-change cartridges

• Safety switch

• 30L collect

• Foldable handle 230V Lawn Aerator/Scarifier, 380mm Stock No. 97922

• Five adjustable working depths (+6, -3, -6, -9 and -12mm)

45L collect

Input output

No-load

Blade

Tine

Cable

Weight 9.3kg

RRP Ex. VAT £128.33 £149.99 RRP Inc. VAT £153.99 £179.99

161cc

all soil types • Four

Brush Cutter and

Trimmer, 32.5cc

• Two-stroke petrol engine • Choke for easy

and

switch with safety

lever and lock

for starting • Bike

for comfortable use •

and

bottle 4 in 1 Petrol Garden Tool, 32.5cc Stock No. 84706 • Four attachments for different tasks around the garden • Two-stroke petrol engine • Easy start recoil system, electronic ignition and choke for easy starting • On/off

safety

• Adjustable

• “Tap

• Single

Contents: 1 x

Petrol

tool 1 x

cutter attachment 1 x

1 x

1 x Extension

attachment E10 COMPATIBLE E10 COMPATIBLE E10 COMPATIBLE

• Foldable handle Voltage 230V 230V

1,500W 1,800W

speed 3,000rpm 3,500rpm Working width 320mm 380mm

diameter (scarifier) 128mm 128mm

count (aerator) 16 20

length 10m 10m

13.4kg

Petrol Cultivator/Tiller,

Stock No. 04604 • Effective in

robust blades • Working width is 560mm • Adjustable tilling depth of up to 260mm • Handlebar steering • Variable speed four-stroke petrol motor Petrol

Line

Stock No. 80880

starting

on/off

throttle

handle

Shoulder harness with quick-release mechanism • Supplied with a three-tooth brush cutting blade, “tap and go” double line spool, assembly tools

0.5L two-stroke mixing

switch with operator

trigger • Split shaf t for ease of transport

D-type soft grip handle

and go” line feed

strap shoulder harness with quick-release mechanism

4-in-1

garden

Grass trimmer/brush

Pruner/saw attachment

Hedge trimmer attachment

pole

72 drapertools.com Landscaping & Gardening Tools

tank capacity 0.6L Weight (as grass trimmer dry) 5.9kg Brush cutting capacity Engine capacity Max. engine output Max. engine speed Fuel tank capacity Shaft length 1,500mm Trimming capacity 440mm Weight (dry) 7.2kg

•

• Mounts to any all terrain vehicle (ATV) by fixing straps supplied

• Supplied with two lances: one for broadcast spraying, one with a trigger for hand operation

• Powered by 12V battery or via electric 12V ATV supply

• Pressure-activated diaphragm pump

• Trigger operated lance with heavy droplet pattern for minimal spray rift in windy conditions

• Tank manufactured from special chemical-resistant polymers for extra long life

• Can be used for spraying fertiliser, weed killer, de-icer and ethylene glycol products

•

Galvanised Garden Incinerator, 85L Stock No.

53253

Made from galvanised steel

Suitable for ever yday use

Petrol Earth Auger Kit Stock No.

Total height (including lid and leg) is 800mm

68294

Ideal

and

• Safety

for boring fence

gate post holes

for deep rooted planting

lanyard for quick emergency shut-off

Contents: 1 x Auger 3 x Earth auger bits: 100, 150, 200mm Ø Galvanised Mini Incinerator, 15L Stock No. 53250

Easily operated by one person using the twin handles with foam grip

Made from galvanised steel

Suitable for ever yday use £41.66 Ex. VAT £49.99 Inc. VAT £241.66 Ex. VAT £289.99 Inc. VAT £14.99 Ex. VAT £17.99 Inc. VAT

Expert 12V DC ATV Spot/ Broadcast

Draper

Sprayers

Duty Tipping Carts

Supplied with remote switch for operating away from the ATV Heavy

with toughened plastic tray

Reinforced steel frame chassis

Steel handle with foam comfort grip

Fitted with heav y-duty pneumatic wheels

Ref. Stock no. Capacity Hose length Max. flow rate (broadcast lance) Max. flow rate (hand lance) Max. pressure (broadcast lance) Max. pressure (hand lance) Dimensions Weight (empty) RRP Ex. VAT RRP Inc. VAT 1 34676 60L 4.5m8.3L/min3.8L/min70psi (4.86bar)40psi (2.76bar)W 864 x H 419 x D 368mm8.3kg £204.17£245.00 2 34677 98L 4.5m8.3L/min3.8L/min70psi (4.86bar)40psi (2.76bar)W 864 x H 622 x D 368mm9.9kg £241.66£289.99 Ref. Stock no.CapacityDimensions Weight capacity RRP Ex. VAT RRP Inc. VAT 1 58553 75L W 1,040 x H 920 x D 510mm200kg £133.33£159.99 2 52628 120L W 1,040 x H 930 x D 510mm450kg £245.83£294.99 1 1 2 2 52cc 1,450W 3,000rpm (idle) 900rpm (±300) Fuel tank capacity 1.2L Drill length 800mm Accessory drills 100mm (1.76kg), 150 (2.30kg), 200 (2.82kg) Weight (without drills) 8.9kg E10 COMPATIBLE 73 drapertools.com Landscaping & Gardening Tools

Handle easily conver ts for towing (Stock no. 52628 only)

•

NEW Draper Expert Garden Tool Set (6 Piece) Stock No. 08996

Durable construction

Ergonomic soft grip handles • The secateurs have chrome-plated blades and are fitted with a safety lock Contents: 1 x Hand cultivator 1 x Hand trowel 1 x Hand transplanting trowel 1 x Hand fork 1 x Hand weeder 1 x Bypass secateurs Draper Expert Ratchet Action Anvil Pattern Loppers, 750mm Stock No. 94984

Lightweight but strong

Non-stick ratchet action blade

•

Manufactured from aluminium with high-quality carbon steel blades which are coated for corrosion-free operation

Soft grip handles for added user comfor t

Capable of cutting 40mm branches Draper Expert Telescopic Soft Grip Anvil Ratchet Action Loppers with Aluminium Handles Stock No. 36826

Hardened and tempered non-stick coated blades

from flat tubular aluminium with extendible handles and sof t grips

•

• Manufactured

The handles extend from 520 to 695mm by depressing a button on the handles

The cutting capacity is 45mm diameter Draper Expert Ratchet Action Bypass Pattern Loppers, 750mm Stock No. 94985

Lightweight but strong

Non-stick ratchet action blade

Manufactured from aluminium with highquality carbon steel blades which are coated for corrosion-free operation

•

Soft grip handles for added user comfor t

Capable of cutting 40mm branches Draper Expert Tree Pruner with Telescopic Handle, 32mm Diameter Stock No. 45334

Incorporates four-position lock telescopic aluminium profile pole extending from 1.5 to 2.5m with heavy-duty hand grip

Detachable curved pruning saw blade 355mm long

Nylon cord-operated cutting blade Draper Expert Anvil and Bypass Secateurs Set, 200mm (2 Piece) Stock No. 08986

Made from carbon steel

Non-stick chrome coating for corrosion-free operation

Handles fitted with soft grips for comfort

Fitted with a safety lock Contents: 1 x Anvil secateurs 1 x Bypass secateurs £32.49 £38.99 £23.33 Ex. VAT £27.99 Inc. VAT £23.33 Ex. VAT £27.99 Inc. VAT £35.83 VAT £42.99 Inc. VAT £27.49 Ex. VAT £32.99 Inc. VAT £64.99 VAT 74 drapertools.com Landscaping & Gardening Tools

•

OVER 950 PAGES OF TOOLS NEW CATALOGUE OUT NOW Pick up a copy at your local Draper stockist or order online at drapertools.com/new-catalogue Leaf Collectors (Pair) Stock No. 76762 • Scoop-shaped with soft hand grips • Impact-resistant heavy-duty polypropylene Leaf Grabber Stock No. 82899 • Allows the user to collect leav without bending • Manufactured with tubular steel handles fitted with and strong polypr £9.16 Ex. VAT £10.99 Inc. VAT £22.49 Ex. VAT £26.99 Inc. VAT Landscaping & Gardening Tools

your Stockist To find your local stockist, go to drapertools.com/find-a-stockist We also have a dedicated product support helpline, so pick up the phone if you need some help or advice. With over a century of history and heritage, numerous award-winning products and excellent customer service, you can choose Draper with confidence. But don’t just take our word for it; here’s what our customers are saying: All prices are correct as of September 2022, when this document was produced. Promotion expires 31 December 2022. Draper Tools reserves the right to change prices at any time and without prior notice. RRP is the Recommended Retail Price and retail prices may vary in-store and online. All photographs and text are as a guide only and do not necessarily represent the products on offer. Designed and published by Draper Tools Ltd. E&OE. Stock No. 06539 Draper Tools Limited, Hursley Road, Chandler’s Ford, Hampshire, SO53 1YF, UK Keith “Amazing, second to none service” Russell “Polite, quick friendly response” Dan “Communication throughout was quick and very clear” Jacqueline “ Well done Draper. Excellent service” Lee “ Will try and make sure any tool I need I get from you” YOUR NEAREST STOCKIST IS: WE’RE COMMITTED TO QUALITY Rated Excellent Rated Excellent drapertools.com

Find