4308003 brochure hijsklemmen
EN 2008 / 2009
29-04-2008
16:34
Pagina 1
Lifting clamps
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 2
Design - Compact design and a low own weight. - Use of top quality steel for housing, lifting shackle, cam and pivot guarantees a high level of usage and a long life. Quality - Very good quality and finish. - Usage of “Exotic” steel for cam an pivot. - Simple construction, therefor easy to repair. - All lifting clamps are tested on our own testing facilities upto 2 times its Safe Working Load (SWL). - Each clamp is supplied with a test certificate. General - Always read the manual before using a clamp. - The lifting clamps are suitable for lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB, 1166 N/mm2). - The lifting clamps are suitable for usage in normal atmospheric conditions, between -40°C and +100°C. - Never overload a clamp and prevent the jerking of loads. - When loading always use the whole jaw depth. - Never lift more than one plate at the same time. - Always keep your distance during lifting and descending of a load. - Prevent situations that anybody is under the load. - Any welding to the clamp is forbidden, this can influence the hardness and toughness of the clamp. Delivery - All lifting clamps are supplied with an original certificate. - All lifting clamps are conform to European Standards according to Machine Directive 98/37/EC. - All lifting clamps have been approved after stringent test by Government Safety Authorities (No. Al: 2753A).
Terrier Lifting Clamps BV Ohmweg 11 4338 PV Middelburg P.O. box 8119 4330 EC Middelburg The Netherlands T (+31) 118 65 17 17 F (+31) 118 65 17 18 I www.terrierclamps.com E terrier@terrierclamps.com
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 3
5 Year Warranty
Terrier Lifting Clamps provides a 5 year warranty on its lifting clamps. This warranty is applicable to the original end user of the lifting clamps. Only if the clamp has been inspected, checked and maintained by this instructions and by an official dealer. This warranty period of 5 years is valid from the day of purchase, and is liable to all conditions and measurements stated in this document. 1. Conditions This warranty only covers failures in the lifting tools which is the consequence of production errors which occur during normal use. The warranty covers no wear to components such as pivots, cam assemblies, lock springs etc. Should there be any kind of failure within this guarantee period, the lifting tool will be replaced or repaired to insight of the producer. No warranty is given to clamps due to the following failures: - Regular wear - Overload - Wrong and/or carelessly use - Damages - Not following procedures and measures - Hoisting differing material other then indicated on clamp or stated in the user-manual - Adapting and/or modifying of the Terrier clamp - The injudicious use of the clamp, and not succeeding all indications which are stated in the users manual - When maintenance and/or revision has not been carried out by an authorised Terrier distributor The producer is not responsible for incidental damage or damage due to use of the lifting tools as well as from violation of this guarantee manual. 2. Procedure Safety Inspection All inspections and repairings must be written down in the maintenance diagram. This counts not only for your own inspections but also for inspections which are carried out by your authorised Terrier distributor. When the clamp is handed in for maintenance and inspection you always must provide the maintenance diagram. Defective Lifting Clamps When a form of wear or damage is indicated, you must take the following measures. 1 Take the lifting clamp out of use. (Note the date of failure of the lifting clamp) 2 Try to recover the cause of the failure, for example (complete list is available in chapter 1): - Overload - Wrong and/or carelessly use - etc These claims stated in no.2 do not fall under the guarantee! To guarantee the security of you and your colleagues you are obliged to follow up this procedure. 3 Return your lifting clamp (with the maintenance history) to your authorised Terrier distributor. 4 If the lifting clamp has been revised / repaired by your distributor, you can safely use your clamp again. Please note this date in your maintenance chart.
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 4
Vertical clamps TS / STS vertical clamps
5
TSMP / STSMP vertical clamps
6
TSU / STSU vertical clamps
7
TSEU-A / TSU-R vertical clamps
8
TSHP / TSHPU vertical clamps
9
TNMK / TNMKA vertical clamps
10
FBK vertical clamps
15
Horizontal clamps FHX / FHSX horizontal clamps
11
TDH horizontal clamps
12
THSK horizontal clamps
13
FHX-V / TNMH horizontal clamps
14
TPH horizontal clamps
19
Screw clamps FSV / FSVW screw clamps
16
TSCC screw clamps
17
TBS screw clamps shipbuilding
18
Drum clamps TVK drum clamps
21
TVKH drum clamps
21
Miscellaneous TBC pipe lifting clamps
20
Vertical clamps with an extra hardened pivot and cam
22
Stelcon platehooks
23
TRC
23
TTL
24
TBLC
24
Spare parts
25
Safely lifting
26
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 5
Vertical clamps
TS / STS - For vertical lifting and transporting of steel plates and structures. - The TS/STS lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. - The clamp is locked in closed as well as in open position. - Lifting capacity and jaw opening are clearly engraved in the body. - Type STS are supplied with enlarged jaw opening.
Ref. nr.
Type
850000 850800 850880 850100 850901 850331 850441 850451 850301 850401 851501 851551 850501 850601 850605 850700 850701 850721
0.75 TS 1 TS 1 TSE 1.5 TS 2 TSE 3 TSE 4.5 TS 4.5 TSE 6 TS 7.5 TS 7.5 TSE 9 TS 12 TS 15 TS 17 TS 20 TS 25 TS 30 TS
Capacity (kg) 750 1000 1000 1500 2000 3000 4500 4500 6000 7500 7500 9000 12000 15000 17000 20000 25000 30000
852000 852451 852201 852301 852305 852401 852501 852600 852601 852721
2 STS 4.5 STS 6 STS 7.5 STS 9 STS 12 STS 15 STS 20 STS 25 STS 30 STS
2000 4500 6000 7500 9000 12000 15000 20000 25000 30000
Specifications are subject to change.
Jaw-opening (R) (mm) 0 - 13 0 - 18 0 - 25 0 - 20 0 - 35 0 - 35 0 - 25 0 - 45 0 - 32 0 - 40 0 - 55 0 - 55 0 - 52 0 - 76 0 - 76 0 - 80 5 - 85 10-90
S 47 55 55 80 78 78 85 85 114 112 110 110 120 120 120 170 170 170
T 30 44 44 65 65 65 68 68 75 75 75 80 84 90 90 100 100 100
Dimensions in mm U V W 205 100 25 265 135 38 240 142 38 345 165 51 350 185 55 350 185 55 430 200 65 430 245 64 490 255 69 540 245 58 560 285 70 560 285 70 610 310 110 550 310 110 550 310 110 880 495 140 880 495 140 880 495 175
X 37 35 35 45 43 54 67 67 69 70 73 73 75 75 75 115 115 155
Y 10 15 15 17 17 17 22 22 25 25 25 20 20 50 50 62,5 62,5 62,5
Weight (kg) 1,5 3,3 3,6 6,3 6,5 6,7 14,8 15,9 18,6 24 25 26 42 71 71 140 140 145
17-38 25-50 28-57 30-85 30-85 50-100 80-150 80-150 80-150 80-150
80 85 120 110 110 120 120 170 170 170
63 68 74 75 75 84 90 100 100 100
350 430 500 540 560 610 550 880 880 880
43 67 67 73 73 75 75 115 115 155
17 22 25 25 20 20 50 62,5 62,5 62,5
6 15 20 24 25 42 77 145 145 148
5
185 225 275 295 305 390 440 580 580 580
58 65 78 58 70 110 110 140 140 175
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 6
Vertical clamps
TSMP / STSMP - The Terrier lifting clamps TS and STS are also available in MP-version. - MP-version means that the lifting shackle has a three way articulated linkage arrangement. - For lifting and transporting of all steel plates and structures. - When attached to a fixed load bearing arm (e.g. spreader bar) the clamp will retain its flexibility and no chain is needed. - Due to length of the three way linkage arrangement the clamp can be lowered further between standing plates or structures. - Lifting capacity and jaw opening are clearly engraved in the body. - Type STSMP is supplied with an enlarged jaw opening.
Ref. nr.
Type
850010 850810 850818 850110 850911 850221 850211 851401 850311 850411 851510 851515 850511 850611 851615 850710 850711
0.75 TSMP 1 TSMP 1 TSEMP 1.5 TSMP 2 TSEMP 3 TSEMP 4.5 TSMP 4.5 TSEMP 6 TSMP 7.5 TSMP 7.5 TSEMP 9 TSMP 12 TSMP 15 TSMP 17 TSMP 20 TSMP 25 TSMP
Capacity (kg) 750 1000 1000 1500 2000 3000 4500 4500 6000 7500 7500 9000 12000 15000 17000 20000 25000
852010 852111 852211 852311 852315 852411 852511 852610 852611
2 STSMP 4.5 STSMP 6 STSMP 7.5 STSMP 9 STSMP 12 STSMP 15 STSMP 20 STSMP 25 STSMP
2000 4500 6000 7500 9000 12000 15000 20000 25000
Jaw-opening (R) (mm) 0 - 13 0 - 18 0 - 25 0 - 20 0 - 35 0 - 35 0 - 25 0 - 45 0 - 32 0 - 40 0 - 55 0 - 55 0 - 52 0 - 76 0 - 76 0 - 80 5 - 85
S 47 55 55 80 80 80 85 85 114 112 110 110 120 120 120 170 170
T 30 44 45 65 65 65 68 68 74 75 75 80 80 90 90 100 100
Dimensions in mm U V W 260 100 25 313 130 38 425 142 38 470 165 51 510 180 58 515 185 55 695 200 55 705 245 64 760 240 71 820 245 58 820 285 70 820 310 70 960 310 110 940 310 110 940 310 110 1150 495 140 1150 495 140
X 37 35 35 45 43 42 67 67 69 70 73 73 75 75 75 115 115
Y 10 15 15 17 17 15 22 22 25 25 25 20 26 50 50 62,5 62,5
Weight (kg) 2 4,2 4,5 7,6 7,7 8 18,1 19,2 22,8 28 30 32 46 79 79 158 158
17-38 25-50 28-57 30-85 30-85 50-100 80-150 80-150 80-150
80 85 120 112 110 120 120 170 170
63 68 74 75 80 84 90 100 100
470 695 760 820 820 960 940 1150 1150
43 67 67 73 73 75 75 115 115
17 22 25 25 20 26 50 62,5 62,5
7,3 17 23 28 30 47 82 161 161
6
185 225 275 295 305 390 440 580 580
58 65 78 58 70 110 110 140 140
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 7
Vertical clamps
TSU / STSU - For lifting and transporting of steel plates and structures from all positions (horizontal, vertical and sidelong). - Articulated lifting shackle. - The TSU /STSU lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. - The clamp is locked in closed as well as in open position. - Lifting capacity and jaw opening are clearly engraved in the body. - Type STSU is supplied with enlarged jaw opening.
Ref. nr.
Type
855000 865100 865800 855100 855601 865331 865441 865301 865401 865601 855400 855405 865901 865151 865155 865700 865251 865230
0.75 TSU 1 TSU 1 TSEU 1.5 TSU 2 TSEU 3 TSEU 4.5 TSU 4,5 TSEU 6 TSU 7.5 TSU 7.5 TSEU 9 TSU 12 TSU 15 TSU 17 TSU 20 TSU 25 TSU 30 TSU
Capacity (kg) 750 1000 1000 1500 2000 3000 4500 4500 6000 7500 7500 9000 12000 15000 17000 20000 25000 30000
856000 856101 856201 856301 856305 856401 856501 856600 856601 856331
2 STSU 4.5 STSU 6 STSU 7.5 STSU 9 STSU 12 STSU 15 STSU 20 STSU 25 STSU 30 STSU
2000 4500 6000 7500 9000 12000 15000 20000 25000 30000
Specifications are subject to change.
Jaw-opening (R) (mm) 0 - 13 0 - 18 0 - 25 0 - 20 0 - 35 0 - 35 0 - 25 0 - 45 0 - 32 0 - 40 0 - 55 0 - 55 0 - 52 0 - 76 0 - 76 0 - 80 5 - 85 10-90
S 47 55 55 80 80 80 85 85 115 112 110 110 120 120 120 170 170 170
T 30 48 48 70 70 70 68 68 80 80 80 80 80 80 90 100 100 100
Dimensions in mm U V W 210 100 25 300 130 38 285 142 38 350 165 54 380 180 58 385 185 55 425 235 54 425 245 64 520 245 64 560 245 58 560 285 70 650 310 70 650 310 110 635 310 110 635 310 110 830 495 140 830 495 140 830 495 175
X 37 35 35 45 43 42 70 67 69 70 73 73 75 75 75 115 115 155
Y 10 18 18 18 18 15 25 25 32 32 32 45 45 45 45 75 75 75
Weight (kg) 1,7 3,5 3,9 7,2 7,3 7,5 15,6 16,7 21 26 30 32 45 75 77 145 148 150
17-38 25-50 28-57 30-85 30-85 50-100 80-150 80-150 80-150 80-150
80 85 120 110 110 125 120 170 170 170
69 68 80 80 80 80 80 100 100 100
380 425 520 560 650 650 635 830 830 830
43 67 67 73 73 75 75 115 115 155
18 25 21 32 45 45 45 75 75 75
8 17 32 40 40 45 80 150 150 155
7
185 225 275 295 305 390 440 580 580 580
58 65 78 58 70 110 110 140 140 175
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 8
Vertical clamps
TSEU-A - Only 1 clamp needed for different kind of jobs. - Also the same clamp can be used if a big jaw opening is necessary. - For lifting and transporting of steel plates and structures from all positions. - Jaw opening from 0 - 100 mm. Adjustable by steps of 20 mm. - Capacity 3000 kg - Strong and lightweight construction.
Y
T
U
S W
X
V
Ref. nr. 863300
Type 3 TSEU-A
Capacity (kg) 3000
Jaw-opening (R) (mm) 0-100
S 80
T 70
Dimensions in mm U V W 385 235-300 55
X 42
Y 15
Weight (kg) 11
S 80
T 70
Dimensions in mm U V W 365 165 55
X 45
Y 18
Weight (kg) 7,2
TSU-R - For lifting and transporting of stainless steel plates and structures a TSU-R lifting clamp is available. - Pivot and cam are made of stainless steel. - Body and lock lever are nickel plated to prevent corrosion due to carbon contamination.
Ref. nr. 862101
Type 2 TSU-R
Capacity (kg) 2000
Jaw-opening (R) (mm) 0 - 20
8
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 9
Vertical clamps
TSHP - For lifting and transporting of Holland-Profile (HP) and structures with HP-profile. - Also useful as a “big-jaw� opening clamp. - Standard with 3 pivots for extra powerful clamping force. - The Terrier TSHP lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. - The clamp is locked in closed as well as in open position.
Ref. nr. 860110 860111
Type 1 TSHP 1.5 TSHP
Capacity (kg) 1000 1500
Jaw-opening (R) (mm) 0 - 80 0 - 80
S 205 205
T 65 65
Dimensions in mm U V W 530 272 55 530 272 55
X 52 52
Y 16 16
Weight (kg) 19,5 20
T 70 68
Dimensions in mm U V W 385 185 55 425 245 84
X 42 67
Y 15 25
Weight (kg) 15 19
TSHPU TSHPU is a follow-up of the TSHP-1 and TSHP-1.5. It is especially designed for lifting, handling and transporting of HP-profile and construction with HP-profile. Properties - capacity 3.0 tons. Opening 0 - 35 mm. - capacity 5.0 tons. Opening 0 - 45 mm.
Ref. nr. 860300 860500
Type 3 TSHPU 5 TSHPU
Specifications are subject to change.
Capacity (kg) 3000 5000
Jaw-opening (R) (mm) 0 - 35 0 - 45
S 90 110
9
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 10
Vertical clamps
TNMK / TNMKA - TNMK is a NON-MARKING clamp with 2 special synthetic pads. The clamp can be used for lifting, handling and transporting (stainless) steel, aluminium, wood and marble plates. - After lifting and handling, the clamps leave no markings. - The clamp is locked in closed as well as in open position.
TNMKA A min. 3 mm/max. 180 mm B min. 220 mm/max. 400 mm Adjustable in steps of 20 mm.
Ref. nr. 862035 862135 862005 862010 862037 862038 862039
Type 0.5 TNMK 0.5 STNMK 0.5 TNMKA 1 TNMK 1.5 TNMK 2 TNMK 3 TNMK
Capacity (kg) 500 500 500 1000 1500 2000 3000
Jaw-opening (R) (mm) 1 - 20 17 - 37 1 - 180 1 - 30 1 - 40 1 - 50 1 - 60
H 200 200 200 235 235 360 360
10
S 93 93 93 95 95 120 120
T 65 65 65 80 80 100 100
Dimensions in mm U V W 360 220 48 360 240 48 360 200-340 60 400 275 46 400 275 46 660 380 58 660 380 58
X 48 48 48 54 54 65 65
Z 80 80 80 80 80 80 80
Weight (kg) 5,5 5,5 10 6,5 7,2 14 15
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 11
Horizontal clamps
FHX / FHSX - For horizontal lifting and transporting of steel plates. - The compact shape and relative light own weight with a high lifting capacity. - The Terrier FHX/FHSX lifting clamps must always be used in pairs (or multiples thereof). - Lifting capacity and jaw opening are clearly engraved in the body. - The FHS has an enlarged jaw opening.
Ref. nr.
Tye
953100 953200 953300 953400 953600 953800 953010 953012
1 FHX 2 FHX 3 FHX 4 FHX 6 FHX 8 FHX 10 FHX 12 FHX
Capacity (kg/pair) 1000 2000 3000 4000 6000 8000 10000 12000
954200 954300 954400 954600 954800 954010 954012 853820
2 FHSX 3 FHSX 4 FHSX 6 FHSX 8 FHSX 10 FHSX 12 FHSX 15 FHSX
2000 3000 4000 6000 8000 10000 12000 15000
Specifications are subject to change.
Jaw-opening (R) (mm) 0 - 35 0 - 60 0 - 60 0 - 60 0 - 60 0 - 60 0- 60 0 - 60
A 193 290 293 295 330 330 330 330
B 140 180 220 220 225 225 225 225
Diemnsions in mm C D E 65 10 100 80 20 115 90 20 140 100 25 135 120 30 130 120 30 130 120 30 130 120 30 130
F 25 30,5 30,5 30,5 30,5 30,5 30,5 30,5
G 15 15 20 30 30 30 30 30
Weight (kg/pc) 2,6 7,7 11,4 13 13 18 20 21
0 -100 0 -100 0 -100 0 -100 0 -100 0-100 0-100 0 -150
380 400 410 425 425 425 425 665
180 220 220 225 225 225 225 350
80 90 100 120 120 120 120 140
30,5 30,5 30,5 30,5 30,5 30,5 30,5 45
15 15 20 30 30 30 30 30
9 14 16 22 22 22 22 50
11
20 20 25 30 30 30 30 30
115 140 135 130 130 130 130 240
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 12
Horizontal clamps
TDH - For lifting and transporting of thin sheets that deflect when being lifted. - Compact shape and relatively low own weights, with a high lifting capacity. - The Terrier TDH horizontal lifting clamps must always be used in pairs (or multiples thereof).
Ref. nr. 970100 970200
Type 1 TDH 2 TDH
Capacity (kg/pair) 1000 2000
Jaw-opening (R) (mm) 0 - 15 0 - 35
A 190 235
12
B 85 135
Dimensions in mm C E F 10 20 95 20 25 110
G 140 180
H 65 80
Weight (kg/pc) 2,7 7,5
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 13
Horizontal clamps
THSK - For lifting, handling and transporting of packages and single steel plates - The Terrier THSK horizontal lifting clamps must always be used in pairs (or multiples thereof). - Capacity 1.5 tons per pair upto 9 tons per pair. - Opening 3 - 180, 3 - 300 and 3 - 420 mm.
Ref. nr. 815180 815300 830180 830300 845180 845420 860180 860420 890180 890420
Type 1.5 THSK/180 1.5 THSK/300 3 THSK/180 3 THSK/300 4.5 THSK/180 4.5 THSK/420 6 THSK/180 6 THSK/420 9 THSK/180 9 THSK/420
Specifications are subject to change.
Capacity (kg/pair) 1500 1500 3000 3000 4500 4500 6000 6000 9000 9000
Jaw-opening (R) (mm) 3 - 180 3 - 300 3 - 180 3 - 300 3 - 180 3 - 420 3 - 180 3 - 420 3 - 180 3 - 420
A 290 410 300 410 300 530 305 540 305 540
13
B 200 200 240 235 240 235 250 250 250 250
Dimensions in mm D E F 15 135 27 15 135 27 20 165 27 20 165 27 20 165 27 20 170 27 25 160 27 25 165 27 25 160 27 25 165 27
R 60 60 70 70 70 70 77 75 77 75
X 87 87 105 105 105 105 120 120 120 120
Y 20 20 20 20 20 20 20 20 20 20
Weight (kg/pc) 9 11,5 14,5 13 13 15 20 23 25,5 29,5
4308003 brochure hijsklemmen
29-04-2008
16:34
Pagina 14
Horizontal clamps
FHX-V - The FHX-V Lifting clamp has a spring attached to the cam assembly. The spring makes sure that the clamp will be closed on any desired spot. - One of the major advantages of this clamp is that only one person is able to place the clamps and to guide the hoist - These clamps are available with a capacity from 1000 kg per pair till 4000 kg per pair.
G F
A
D B
E
C
Ref. nr.
Type
953101 953201 953301
Capacity (kg/pair) 1000 2000 3000
1 FHX-V 2 FHX-V 3 FHX-V
Jaw-opening (R) (mm) 0 - 35 0 - 60 0 - 60
A 193 290 293
B 140 180 220
Dimensions in mm C D E F 85 10 100 25 125 20 115 30,5 125 20 140 30,5
G 15 15 20
Weight (kg/pc) 3 9 12,5
A 154 270 275 305 310
B 140 225 225 250 250
Dimensions in mm C D E 65 15 95 90 23 150 90 28 160 105 28 160 120 33 160
G 15 15 15 20 20
Weight (kg/pc) 3,5 9 13 16 17
TNMH - The TNMH lifting clamp is suited for transporting and lifting objects with a fragile surface. Like stainless steel, wood panels, aluminium etc. - The jaw and cam is covered with a high quality pressure resistant fabric. - These clamps are available with a capacity from 1000 kg per pair till 6000 kg per pair.
G
F
A
C
Ref. nr. 862810 862820 862830 862840 862860
E
Type 1 TNMH 2 TNMH 3 TNMH 4 TNMH 6 TNMH
D B
Capacity (kg/pair) 1000 2000 3000 4000 6000
Jaw-opening (R) (mm) 0 - 25 0 - 45 0 - 45 0 - 50 0 - 50
14
F 20 30,5 30,5 30,5 30,5
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 15
Vertical clamps
FBK - For lifting and transportation of steel beams, profiles and structures where the load must stay in position. - The special shape of the lifting shackle, places the centre of the gravity of the beam to be lifted directly beneath the lifting shackle. - This maintains the equilibrium of the beam once it has been lifted and keeps the flanges of the vertical so that the beam can easily be stacked or positioned. - Especially recommended for transportation and stacking of steelbeams (e.g. when sawing of steelbeams, stacking of steelbeams and building of steel contructions). - Lifting capacity and jaw-opening are clearly engraved in the body.
TOBK - For lifting and transportation of steel beams, profiles and structures . - Because of the safety mechanism, the clamp is locked in closed as well as in open position. - The clamp is suitable to lift steel beams on the flange as well as on the rear ends of the beam. - Other capacity and jaw-opening on request. B
Y
E
D F
A H C
Ref. nr. 851010 851000 851100 851001
G
Type 1 FBK 1.5 FBK 3 FBK 1,5 TOBK
Specifications are subject to change.
Capacity (kg) 1000 1500 3000 1500
Jaw-opening (A) (mm) 0 - 15 0 - 20 0 - 25 3 - 20
B 200 260 380 280
15
C 120 200 200 157
Dimensions in mm D E F 250 21,5 130 350 65 170 410 72 205 325 64 168
G 35 45 67 67
H 45 65 65 65
Y 15 15 30 17
Weight (kg/pc) 3 8 16 9,5
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 16
Screw clamps
FSV / FSVW - For horizontal lifting and transporting of steel beams and structures. - Can also be attached upside down and be used as a (temporary) lifting point. - Has equal opening and closing of both jaws for simple and quick assembly. - Lifting capacity and jaw opening are clearly engraved in the body. - Type FSVW is identical to type FSV but is delivered without a lifting eye so you can choose your own means of fixation.
Ref. nr.
Type
851400 851500 851600 851700 851800 851110
1 FSV 2 FSV 3 FSV 4 FSV 5 FSV 10 FSV
Ref. nr.
Type
951000 951200 951300 951400 951500
1 FSVW 2 FSVW 3 FSVW 4 FSVW 5 FSVW
Capacity (kg/pc) 1000 2000 3000 4000 5000 10000
Jaw-opening (R) (mm) 75 - 190 75 - 190 75 - 190 150 - 300 150 - 300 350 - 450
B 30 30 30 50 50 130
Afmeting in mm C-max D-max E 285 310 73 285 310 73 285 310 73 460 430 79 460 430 79 670 670 85
F 120 120 120 180 180 200
Weight (kg/pc) 4 5 5 13 14 35
Capacity (kg/pc) 1000 2000 3000 4000 5000
Jaw-opening (R) (mm) 75 - 190 75 - 190 75 - 190 150 - 300 150 - 300
B 30 30 30 30 30
Afmeting in mm C-max d-max E 285 150 73 285 150 73 285 150 73 460 245 79 460 245 79
F 120 120 120 180 180
Weight (kg/pc) 3 4 4 12 12
16
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 17
Screw clamps
TSCC - Universal screw clamp for vertical and horizontal lifting and transporting of a large variety of steel structures. - The TSCC screw clamp is fitted with a moveable cam on the thread spindle which provides a powerful clamping force on the workpiece. - The articulated lifting eye ensures an effective clamping force in every position.
Ref. nr. 862705 862700 862715 862730 862760
Type 0.5 TSCC 0.75 TSCC 1.5 TSCC 3 TSCC 6 TSCC
Specifications are subject to change.
Capacity (kg) 500 750 1500 3000 6000
Jaw-opening (R) (mm) 0 - 28 0 - 22 0 - 32 0 - 50 0 - 75
A 156 167 187 224 291
17
B 113 201 187 224 291
Dimensions in mm D d E 89 26 76 120 42 125 135 42 143 165 49 165 215 63 214
F 30 46 46 54 69
G 17 38 45 50 80
Weight (kg) 0,8 3 4 7 18
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 18
Screw clamps shipbuilding
TBS - For use as a temporary lifting point in any room where HP-profile is being used, such as sectional ship parts and ship engine rooms. - The clamp is used for HP-100 to HP-240.
Ref. nr. 862150 862400
Type 1.5 TBS 3 TBS
Capacity (kg) 1500 3000
Jaw-opening A 170 200
HP100 - 240 HP100 - 240
18
B 70 70
Dimensions in mm C D E 149 16 44 149 16 44
F 70 70
G 40 80
Weight (kg/pc) 3 6,5
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 19
Horizontal clamps
TPH - For horizontal lifting and transporting of steel and concrete pipes. - Compact shape and relatively low own weight with a high lifting capacity. - The surface is equipped with “special� plastic. - The Terrier TPH will be delivered per pair. - Plastic cover is easy to change. - TPH can be delivered with Berglock-coupling BL.
Ref. nr.
Type
960150 960300 960400 960600 960800 960810 960812 960815 960820
1.5 TPH 3 TPH 4 TPH 6 TPH 8 TPH 10TPH 12TPH 15TPH 20TPH
Capacity (kg/pair) 1500 3000 4000 6000 8000 10000 12000 15000 20000
BL-8 BL-10 BL-13
7/8-8 BL 10-8 BL 13-8 BL
2000 3200 5400
Specifications are subject to change.
Jaw-opening (R) (mm) 40 40 50 50 70 70 70 70 70
19
A 120 120 120 120 120 120 120 120 120
B 32 32 32 32 32 32 32 32 32
7/8 10 13
35 45 56
Dimensions in mm C D E 175 70 25 175 70 25 195 70 25 195 70 25 195 70 25 215 70 45 215 70 45 215 70 60 215 70 60 25 32 40
11 14 17
18 22 28
T 15 15 25 25 26 26 26 26 26
Weight (kg/pc) 1,6 1,6 2 3,3 3,6 5 6 10 16 0,2 0,4 1
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 20
Pipe lifting clamps
TBC - For vertical lifting and transporting of concrete pipe and wells. - The TBC clamps must always be used in pairs or per three clamps. - Higher capacities or other jaw opening upon request. - The moveable side is fitted with a “special� high pressure plastic surface.
TBC
TBCA A min. 60 mm/max. 220 mm. Adjustable in steps of 25 mm. TBCT
Ref. nr. 870050 870101 S870101 870105
Type 0.5 TBC 1 TBC 1 TBCT 1 TBC-A
Capacity (kg) 500 1000 1000 1000
Jaw-opening (R) 60-120 60-120 60-120 60-220
20
B 170 170 235 170
C 110 110 60 110
Dimensions in mm D E F 160 12 12 160 12 12 75 16 12 160 12 12
G 25 25 35 25
H 60 60 35 60
Weight (kg/pc) 10 10 8,5 11
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 21
Drum clamps
TVK / TVKH - For safe lifting and transporting of steel (oil) drums. - With automatic locking mechanism. - The TVK steel drum clamps are supplied with an original certificate. - The TVK steel drum clamps can be used singleary or per pair as well.
Ref. nr. 828000
Type TVK
Capacity (kg) 500
Jaw-opening A 129
0 - 17
Dimensions in mm B C D 12 96 15
E 28
TVKH - For lifting, handling and transporting of (oil)drums, where the drums have to stay in a horizontal position. - Capacity 0.6 tons.
Ref. nr. 828100
Type TVKH
Specifications are subject to change.
Capacity (kg) 600
A 300
B 375
Dimensions in mm C D E 290 80 50
21
F 12
Weight (kg) 7
Weight (kg) 1,6
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 22
Vertical clamps with an extra hardened pivot and cam
- Equiped with an extra hardened pivot and cam for lifting and transporting steel plates with a hardnes of max. 50 HRC. (for Hardox 400 and 500) - Can be delivered as TS, TSMP and TSU model. - Please ask for special specifications. - For dimensions and loading diagrams see page 5, page 6 and page 7. - Other capacity and jaw-opening on request.
Ref. nr.
Type
850000.5 850880.5 850901.5 850331.5 850451.5 850301.5 851501.5
0.75 TS-H 1 TSE-H 2 TSE-H 3 TSE-H 4.5 TSE-H 6 TS-H 7.5 TSE-H
Capacity (kg) 750 1000 2000 3000 4500 6000 7500
Jaw-opening (R) (mm) 0 - 13 0 - 25 0 - 35 0 - 35 0 - 45 0 - 32 0 - 55
S 47 55 78 78 85 114 112
T 30 44 65 65 68 75 75
Dimensions in mm U V W 205 100 25 240 142 38 350 185 55 350 185 55 430 245 64 490 255 69 540 245 58
X 37 35 43 54 67 69 70
Y 10 15 17 17 22 25 25
Weight (kg) 1,6 3,6 6,5 6,7 15,9 18,6 24
850010.5 850818.5 850911.5 850221.5 851401.5 850311.5 851510.5
0.75 TSMP-H 1 TSEMP-H 2 TSMP-H 3 TSEMP-H 4.5 TSEMP-H 6 TSMP-H 7.5 TSEMP-H
750 1000 2000 3000 4500 6000 7500
0 - 13 0 - 25 0 - 35 0 - 35 0 - 45 0 - 32 0 - 55
47 55 80 80 85 114 112
30 45 65 65 68 74 75
260 425 510 515 705 760 820
100 142 180 185 245 240 245
25 38 58 55 64 71 58
37 35 43 42 67 69 70
10 15 17 15 22 25 25
2 4,5 7,7 8 19,2 22,8 28
855000.5 865800.5 855601.5 865331.5 865301.5 865401.5 865400.5
0.75 TSU-H 1 TSEU-H 2 TSEU-H 3 TSEU-H 4.5 TSEU-H 6 TSU-H 7.5 TSEU-H
750 1000 2000 3000 4500 6000 7500
0 - 13 0 - 25 0 - 35 0 - 35 0 - 45 0 - 32 0 - 55
47 55 80 80 85 115 112
30 48 70 70 68 80 80
210 285 380 385 425 520 560
100 142 180 185 245 245 245
25 38 58 55 64 64 58
37 35 43 42 67 69 70
10 18 18 15 25 32 32
1,7 3,9 7,3 7,5 16,7 21 26
22
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 23
Specials
Stelcon platehooks
TRC - For vertical transport of rail profiles. - The TRC is equiped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. - The clamp is locked in closed as well in open position. - Other capacities or other profile dimensions on request.
Ref. nr. 815000
Type TRC
Specifications are subject to change.
Capacity (kg) 1500
Jaw-opening (R) 40 - 75
23
S 63
T 65
Dimensions in mm U V W 390 170 70
X 48
Y 16
Weight (kg) 8
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 24
Specials
TTL For vertical lifting of tubes, bundles of tubes and solid round material.
Ref. nr.
Type
800550 801011 802021 803036
0.5 TTL 1 TTL 2 TTL 3 TTL
Capacity (kg) 500 1000 2000 3000
Jaw-opening (R) (mm) 48,3 - 114,3 114,3 - 219,1 219,1 - 368 368 - 508
Dimensions in mm B-max D G 215 47 42 345 51 42 610 60 65 720 60 65
Weight (kg) 4 9 31 40
TBLC - For vertical lifting and transporting without marking of products with parallel sides in various materials as steel, wood, plastic, concrete, marble etc. - The clamp is locked in the open position. To perform lifting, the operator must activate the handle and hold it up while the force on the lifting eye is going upwards. When laying down the load, the clamp automaticly locksitself open. - De pads are covered with special plastic to avoid dammaging of the load.
Ref. nr. 801250 801500 801000 801150 801200 801300
Type 0.25 TBLC 0.5 TBLC 1 TBLC 1.5 TBLC 2 TBLC 3 TBLC
Capacity (kg) 250 500 1000 1500 2000 3000
Jaw-opening (A) (mm) 0 - 120 0 - 120 60 - 250 120 - 500 60 - 250 120 - 500
B min-max C min-max 320 - 360 150 - 450 320 - 360 150 - 450 510 - 660 350 - 530 600 - 825 600 - 1200 510 - 660 350 - 550 600 - 825 600 - 1200
24
Dimensions in mm D E min-max F 30 140 - 150 70*80 30 140 - 150 70*80 45 180 - 220 100*120 65 250 - 300 100*120 45 180 - 220 100*120 65 250 - 300 100*120
G 15 15 17 20 17 20
Weight (kg) 6 6 15 16 28 32
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 25
Spare parts
All spare parts are available either separately or as repair sets. It is recommended when any parts are damaged to replace them straight away and not to take any risk. When ordering spare parts always give: model, lifting capacity, jaw opening and serial number as well as the needed spare parts.
A B C D E F G H I J L M N O
Cam assembly Lock lever assembly Lock spring Cam pin Pivot complete Shackle pin Lifting eye for TS, STS, MP model Lifting eye for TSU, STEU model Linkage arr. STMP, STSMP model Link pin for MP model Cam for FHX model Cam pin for FHX model Cam for FHSX model Cam pin for FHSX model
For every vertical clamps are revision- sets and repairsets available. The repair sets contain : A Cam assembly C Lock spring D Cam pin E Pivot set The revision sets contain : A Cam assembly B Lock lever assembly C Lock spring D Cam pin E Pivot complete F Shackle pin
Specifications are subject to change.
Revisionset
25
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 26
Safely lifting vertical
26
Specifications are subject to change.
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 27
Safely lifting horizontal
Specifications are subject to change.
27
4308003 brochure hijsklemmen
29-04-2008
16:35
Pagina 28
www.terrierclamps.com